pinctrl: cy8c95x0: Use temporary variable for struct device

Use a temporary variable for the struct device pointers to avoid
dereferencing. This makes code a bit neater.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/20241110210040.18918-5-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index 54b080f..8b118fd 100644 (file)
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -1429,16 +1429,17 @@ static int cy8c95x0_detect(struct i2c_client *client,
 
 static int cy8c95x0_probe(struct i2c_client *client)
 {
+       struct device *dev = &client->dev;
        struct cy8c95x0_pinctrl *chip;
        struct regmap_config regmap_conf;
        struct regmap_range_cfg regmap_range_conf;
        int ret;
 
-       chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
        if (!chip)
                return -ENOMEM;
 
-       chip->dev = &client->dev;
+       chip->dev = dev;
 
        /* Set the device type */
        chip->driver_data = (uintptr_t)i2c_get_match_data(client);
@@ -1467,14 +1468,14 @@ static int cy8c95x0_probe(struct i2c_client *client)
                return -ENODEV;
        }
 
-       ret = devm_regulator_get_enable(&client->dev, "vdd");
+       ret = devm_regulator_get_enable(dev, "vdd");
        if (ret)
-               return dev_err_probe(&client->dev, ret, "failed to enable regulator vdd\n");
+               return dev_err_probe(dev, ret, "failed to enable regulator vdd\n");
 
        /* bring the chip out of reset if reset pin is provided */
-       chip->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+       chip->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
        if (IS_ERR(chip->gpio_reset))
-               return dev_err_probe(chip->dev, PTR_ERR(chip->gpio_reset), "Failed to get GPIO 'reset'\n");
+               return dev_err_probe(dev, PTR_ERR(chip->gpio_reset), "Failed to get GPIO 'reset'\n");
        gpiod_set_consumer_name(chip->gpio_reset, "CY8C95X0 RESET");
        if (chip->gpio_reset) {
                fsleep(1000);