#endif
/* Netdev */
-struct net_device *fm10k_alloc_netdev(void);
+struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info);
int fm10k_setup_rx_resources(struct fm10k_ring *);
int fm10k_setup_tx_resources(struct fm10k_ring *);
void fm10k_free_rx_resources(struct fm10k_ring *);
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-struct net_device *fm10k_alloc_netdev(void)
+struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info)
{
+ netdev_features_t hw_features;
struct fm10k_intfc *interface;
struct net_device *dev;
NETIF_F_TSO |
NETIF_F_TSO6 |
NETIF_F_TSO_ECN |
- NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_RXHASH |
NETIF_F_RXCSUM;
+ /* Only the PF can support VXLAN and NVGRE tunnel offloads */
+ if (info->mac == fm10k_mac_pf) {
+ dev->hw_enc_features = NETIF_F_IP_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_TSO_ECN |
+ NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_SG;
+
+ dev->features |= NETIF_F_GSO_UDP_TUNNEL;
+ }
+
/* all features defined to this point should be changeable */
- dev->hw_features |= dev->features;
+ hw_features = dev->features;
/* allow user to enable L2 forwarding acceleration */
- dev->hw_features |= NETIF_F_HW_L2FW_DOFFLOAD;
+ hw_features |= NETIF_F_HW_L2FW_DOFFLOAD;
/* configure VLAN features */
dev->vlan_features |= dev->features;
- /* configure tunnel offloads */
- dev->hw_enc_features |= NETIF_F_IP_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_TSO_ECN |
- NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_IPV6_CSUM;
-
/* we want to leave these both on as we cannot disable VLAN tag
* insertion or stripping on the hardware since it is contained
* in the FTAG and not in the frame itself.
dev->priv_flags |= IFF_UNICAST_FLT;
+ dev->hw_features |= hw_features;
+
return dev;
}
pci_resource_len(pdev, 4));
hw->sw_addr = interface->sw_addr;
- /* Only the PF can support VXLAN and NVGRE offloads */
- if (hw->mac.type != fm10k_mac_pf) {
- netdev->hw_enc_features = 0;
- netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL;
- netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL;
- }
-
/* initialize DCBNL interface */
fm10k_dcbnl_set_ops(netdev);
pci_set_master(pdev);
pci_save_state(pdev);
- netdev = fm10k_alloc_netdev();
+ netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
if (!netdev) {
err = -ENOMEM;
goto err_alloc_netdev;