#define I40E_FLAG_DISABLE_FW_LLDP BIT(24)
#define I40E_FLAG_RS_FEC BIT(25)
#define I40E_FLAG_BASE_R_FEC BIT(26)
+/* TOTAL_PORT_SHUTDOWN
+ * Allows to physically disable the link on the NIC's port.
+ * If enabled, (after link down request from the OS)
+ * no link, traffic or led activity is possible on that port.
+ *
+ * If I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED is set, the
+ * I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED must be explicitly forced to true
+ * and cannot be disabled by system admin at that time.
+ * The functionalities are exclusive in terms of configuration, but they also
+ * have similar behavior (allowing to disable physical link of the port),
+ * with following differences:
+ * - LINK_DOWN_ON_CLOSE_ENABLED is configurable at host OS run-time and is
+ * supported by whole family of 7xx Intel Ethernet Controllers
+ * - TOTAL_PORT_SHUTDOWN may be enabled only before OS loads (in BIOS)
+ * only if motherboard's BIOS and NIC's FW has support of it
+ * - when LINK_DOWN_ON_CLOSE_ENABLED is used, the link is being brought down
+ * by sending phy_type=0 to NIC's FW
+ * - when TOTAL_PORT_SHUTDOWN is used, phy_type is not altered, instead
+ * the link is being brought down by clearing bit (I40E_AQ_PHY_ENABLE_LINK)
+ * in abilities field of i40e_aq_set_phy_config structure
+ */
+#define I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED BIT(27)
struct i40e_client_instance *cinst;
bool stat_offsets_loaded;
static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
/* NOTE: MFP setting cannot be changed */
I40E_PRIV_FLAG("MFP", I40E_FLAG_MFP_ENABLED, 1),
+ I40E_PRIV_FLAG("total-port-shutdown",
+ I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED, 1),
I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENABLED, 0),
I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
dev_warn(&pf->pdev->dev, "Cannot change FEC config\n");
}
+ if ((changed_flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED) &&
+ (orig_flags & I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED)) {
+ dev_err(&pf->pdev->dev,
+ "Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)\n");
+ return -EOPNOTSUPP;
+ }
+
if ((changed_flags & new_flags &
I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED) &&
(new_flags & I40E_FLAG_MFP_ENABLED))
static int i40e_veb_get_bw_info(struct i40e_veb *veb);
static int i40e_get_capabilities(struct i40e_pf *pf,
enum i40e_admin_queue_opc list_type);
-
+static bool i40e_is_total_port_shutdown_enabled(struct i40e_pf *pf);
/* i40e_pci_tbl - PCI Device ID Table
*
clear_bit(__I40E_CONFIG_BUSY, pf->state);
}
-/**
- * i40e_up - Bring the connection back up after being down
- * @vsi: the VSI being configured
- **/
-int i40e_up(struct i40e_vsi *vsi)
-{
- int err;
-
- err = i40e_vsi_configure(vsi);
- if (!err)
- err = i40e_up_complete(vsi);
-
- return err;
-}
-
/**
* i40e_force_link_state - Force the link status
* @pf: board private structure
{
struct i40e_aq_get_phy_abilities_resp abilities;
struct i40e_aq_set_phy_config config = {0};
+ bool non_zero_phy_type = is_up;
struct i40e_hw *hw = &pf->hw;
i40e_status err;
u64 mask;
/* If link needs to go up, but was not forced to go down,
* and its speed values are OK, no need for a flap
+ * if non_zero_phy_type was set, still need to force up
*/
- if (is_up && abilities.phy_type != 0 && abilities.link_speed != 0)
+ if (pf->flags & I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED)
+ non_zero_phy_type = true;
+ else if (is_up && abilities.phy_type != 0 && abilities.link_speed != 0)
return I40E_SUCCESS;
/* To force link we need to set bits for all supported PHY types,
* across two fields.
*/
mask = I40E_PHY_TYPES_BITMASK;
- config.phy_type = is_up ? cpu_to_le32((u32)(mask & 0xffffffff)) : 0;
- config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0;
+ config.phy_type =
+ non_zero_phy_type ? cpu_to_le32((u32)(mask & 0xffffffff)) : 0;
+ config.phy_type_ext =
+ non_zero_phy_type ? (u8)((mask >> 32) & 0xff) : 0;
/* Copy the old settings, except of phy_type */
config.abilities = abilities.abilities;
+ if (pf->flags & I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED) {
+ if (is_up)
+ config.abilities |= I40E_AQ_PHY_ENABLE_LINK;
+ else
+ config.abilities &= ~(I40E_AQ_PHY_ENABLE_LINK);
+ }
if (abilities.link_speed != 0)
config.link_speed = abilities.link_speed;
else
i40e_update_link_info(hw);
}
- i40e_aq_set_link_restart_an(hw, true, NULL);
+ i40e_aq_set_link_restart_an(hw, is_up, NULL);
return I40E_SUCCESS;
}
+/**
+ * i40e_up - Bring the connection back up after being down
+ * @vsi: the VSI being configured
+ **/
+int i40e_up(struct i40e_vsi *vsi)
+{
+ int err;
+
+ if (vsi->type == I40E_VSI_MAIN &&
+ (vsi->back->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED ||
+ vsi->back->flags & I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED))
+ i40e_force_link_state(vsi->back, true);
+
+ err = i40e_vsi_configure(vsi);
+ if (!err)
+ err = i40e_up_complete(vsi);
+
+ return err;
+}
+
/**
* i40e_down - Shutdown the connection processing
* @vsi: the VSI being stopped
i40e_vsi_disable_irq(vsi);
i40e_vsi_stop_rings(vsi);
if (vsi->type == I40E_VSI_MAIN &&
- vsi->back->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED)
+ (vsi->back->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED ||
+ vsi->back->flags & I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED))
i40e_force_link_state(vsi->back, false);
i40e_napi_disable_all(vsi);
return ret;
}
+/**
+ * i40e_is_total_port_shutdown_enabled - read NVM and return value
+ * if total port shutdown feature is enabled for this PF
+ * @pf: board private structure
+ **/
+static bool i40e_is_total_port_shutdown_enabled(struct i40e_pf *pf)
+{
+#define I40E_TOTAL_PORT_SHUTDOWN_ENABLED BIT(4)
+#define I40E_FEATURES_ENABLE_PTR 0x2A
+#define I40E_CURRENT_SETTING_PTR 0x2B
+#define I40E_LINK_BEHAVIOR_WORD_OFFSET 0x2D
+#define I40E_LINK_BEHAVIOR_WORD_LENGTH 0x1
+#define I40E_LINK_BEHAVIOR_OS_FORCED_ENABLED BIT(0)
+#define I40E_LINK_BEHAVIOR_PORT_BIT_LENGTH 4
+ i40e_status read_status = I40E_SUCCESS;
+ u16 sr_emp_sr_settings_ptr = 0;
+ u16 features_enable = 0;
+ u16 link_behavior = 0;
+ bool ret = false;
+
+ read_status = i40e_read_nvm_word(&pf->hw,
+ I40E_SR_EMP_SR_SETTINGS_PTR,
+ &sr_emp_sr_settings_ptr);
+ if (read_status)
+ goto err_nvm;
+ read_status = i40e_read_nvm_word(&pf->hw,
+ sr_emp_sr_settings_ptr +
+ I40E_FEATURES_ENABLE_PTR,
+ &features_enable);
+ if (read_status)
+ goto err_nvm;
+ if (I40E_TOTAL_PORT_SHUTDOWN_ENABLED & features_enable) {
+ read_status = i40e_read_nvm_module_data(&pf->hw,
+ I40E_SR_EMP_SR_SETTINGS_PTR,
+ I40E_CURRENT_SETTING_PTR,
+ I40E_LINK_BEHAVIOR_WORD_OFFSET,
+ I40E_LINK_BEHAVIOR_WORD_LENGTH,
+ &link_behavior);
+ if (read_status)
+ goto err_nvm;
+ link_behavior >>= (pf->hw.port * I40E_LINK_BEHAVIOR_PORT_BIT_LENGTH);
+ ret = I40E_LINK_BEHAVIOR_OS_FORCED_ENABLED & link_behavior;
+ }
+ return ret;
+
+err_nvm:
+ dev_warn(&pf->pdev->dev,
+ "total-port-shutdown feature is off due to read nvm error: %s\n",
+ i40e_stat_str(&pf->hw, read_status));
+ return ret;
+}
+
/**
* i40e_sw_init - Initialize general software structures (struct i40e_pf)
* @pf: board private structure to initialize
pf->tx_timeout_recovery_level = 1;
+ if (pf->hw.mac.type != I40E_MAC_X722 &&
+ i40e_is_total_port_shutdown_enabled(pf)) {
+ /* Link down on close must be on when total port shutdown
+ * is enabled for a given port
+ */
+ pf->flags |= (I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED |
+ I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED);
+ dev_info(&pf->pdev->dev,
+ "total-port-shutdown was enabled, link-down-on-close is forced on\n");
+ }
mutex_init(&pf->switch_mutex);
sw_init_done:
projects / linux-2.6-microblaze.git / commitdiff