ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-alpine/
F: arch/arm/boot/dts/alpine*
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
endif
+endif
export TEXT_OFFSET GZFLAGS MMUEXT
* associativity as these may be erroneously set
* up by boot loader(s).
*/
- cache-size = <1048576>; // 1MB
- cache-sets = <4096>;
+ cache-size = <131072>; // 128KB
+ cache-sets = <512>;
cache-line-size = <32>;
arm,parity-disable;
- arm,tag-latency = <1>;
- arm,data-latency = <1 1>;
- arm,dirty-latency = <1>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
};
scu: scu@1f000000 {
};
syscon {
- compatible = "arm,integrator-ap-syscon";
+ compatible = "arm,integrator-ap-syscon", "syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logical module IRQs */
};
syscon {
- compatible = "arm,integrator-cp-syscon";
+ compatible = "arm,integrator-cp-syscon", "syscon";
reg = <0xcb000000 0x100>;
};
* Pin 41: BR_UART1_TXD
* Pin 44: BR_UART1_RXD
*/
- serial@70006000 {
+ serial@0,70006000 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
* Pin 71: UART2_CTS_L
* Pin 74: UART2_RTS_L
*/
- serial@70006040 {
+ serial@0,70006040 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_PAGE_POISONING=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_PAGE_POISONING=y
menuconfig ARCH_CLPS711X
bool "Cirrus Logic EP721x/EP731x-based"
depends on ARCH_MULTI_V4T
- select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_OF
select CLPS711X_TIMER
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MFD_SYSCON
select OF_IRQ
select USE_OF
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
- -I$(srctree)/arch/arm/plat-orion/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
CFLAGS_pmsu.o := -march=armv7-a
config MACH_OX810SE
bool "Support OX810SE Based Products"
+ select ARCH_HAS_RESET_CONTROLLER
select COMMON_CLK_OXNAS
select CPU_ARM926T
select MFD_SYSCON
select OXNAS_RPS_TIMER
select PINCTRL_OXNAS
+ select RESET_CONTROLLER
select RESET_OXNAS
select VERSATILE_FPGA_IRQ
help
*/
#include <linux/kernel.h>
+#include <linux/module.h> /* symbol_get ; symbol_put */
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/major.h>
*/
#include <linux/kernel.h>
+#include <linux/module.h> /* symbol_get ; symbol_put */
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#
# Makefile for the linux kernel.
#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
- -I$(srctree)/arch/arm/plat-versatile/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
obj-y := core.o
obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
#
# Licensed under GPLv2
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include
# Core
bool __init shmobile_smp_init_fallback_ops(void)
{
/* fallback on PSCI/smp_ops if no other DT based method is detected */
+ if (!IS_ENABLED(CONFIG_SMP))
+ return false;
+
return platform_can_secondary_boot() ? true : false;
}
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
- select ALPINE_MSI
+ select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
- select HISILICON_IRQ_MBIGEN
+ select HISILICON_IRQ_MBIGEN if PCI
help
This enables support for Hisilicon ARMv8 SoC family
/dts-v1/;
#include "exynos7.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
&rtc {
status = "okay";
+ clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&watchdog {