--- /dev/null
+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - compatible : should contain two values. First value must be one from following list:
+ - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+};
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
-
-
- [Core Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- xxti 1
- xusbxti 2
- fin_pll 3
- fout_apll 4
- fout_mpll 5
- fout_epll 6
- fout_vpll 7
- sclk_apll 8
- sclk_mpll 9
- sclk_epll 10
- sclk_vpll 11
- arm_clk 12
- aclk200 13
- aclk100 14
- aclk160 15
- aclk133 16
- mout_mpll_user_t 17 Exynos4x12
- mout_mpll_user_c 18 Exynos4x12
- mout_core 19
- mout_apll 20
-
-
- [Clock Gate for Special Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- sclk_fimc0 128
- sclk_fimc1 129
- sclk_fimc2 130
- sclk_fimc3 131
- sclk_cam0 132
- sclk_cam1 133
- sclk_csis0 134
- sclk_csis1 135
- sclk_hdmi 136
- sclk_mixer 137
- sclk_dac 138
- sclk_pixel 139
- sclk_fimd0 140
- sclk_mdnie0 141 Exynos4412
- sclk_mdnie_pwm0 12 142 Exynos4412
- sclk_mipi0 143
- sclk_audio0 144
- sclk_mmc0 145
- sclk_mmc1 146
- sclk_mmc2 147
- sclk_mmc3 148
- sclk_mmc4 149
- sclk_sata 150 Exynos4210
- sclk_uart0 151
- sclk_uart1 152
- sclk_uart2 153
- sclk_uart3 154
- sclk_uart4 155
- sclk_audio1 156
- sclk_audio2 157
- sclk_spdif 158
- sclk_spi0 159
- sclk_spi1 160
- sclk_spi2 161
- sclk_slimbus 162
- sclk_fimd1 163 Exynos4210
- sclk_mipi1 164 Exynos4210
- sclk_pcm1 165
- sclk_pcm2 166
- sclk_i2s1 167
- sclk_i2s2 168
- sclk_mipihsi 169 Exynos4412
- sclk_mfc 170
- sclk_pcm0 171
- sclk_g3d 172
- sclk_pwm_isp 173 Exynos4x12
- sclk_spi0_isp 174 Exynos4x12
- sclk_spi1_isp 175 Exynos4x12
- sclk_uart_isp 176 Exynos4x12
- sclk_fimg2d 177
-
- [Peripheral Clock Gates]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- fimc0 256
- fimc1 257
- fimc2 258
- fimc3 259
- csis0 260
- csis1 261
- jpeg 262
- smmu_fimc0 263
- smmu_fimc1 264
- smmu_fimc2 265
- smmu_fimc3 266
- smmu_jpeg 267
- vp 268
- mixer 269
- tvenc 270 Exynos4210
- hdmi 271
- smmu_tv 272
- mfc 273
- smmu_mfcl 274
- smmu_mfcr 275
- g3d 276
- g2d 277
- rotator 278 Exynos4210
- mdma 279 Exynos4210
- smmu_g2d 280 Exynos4210
- smmu_rotator 281 Exynos4210
- smmu_mdma 282 Exynos4210
- fimd0 283
- mie0 284
- mdnie0 285 Exynos4412
- dsim0 286
- smmu_fimd0 287
- fimd1 288 Exynos4210
- mie1 289 Exynos4210
- dsim1 290 Exynos4210
- smmu_fimd1 291 Exynos4210
- pdma0 292
- pdma1 293
- pcie_phy 294
- sata_phy 295 Exynos4210
- tsi 296
- sdmmc0 297
- sdmmc1 298
- sdmmc2 299
- sdmmc3 300
- sdmmc4 301
- sata 302 Exynos4210
- sromc 303
- usb_host 304
- usb_device 305
- pcie 306
- onenand 307
- nfcon 308
- smmu_pcie 309
- gps 310
- smmu_gps 311
- uart0 312
- uart1 313
- uart2 314
- uart3 315
- uart4 316
- i2c0 317
- i2c1 318
- i2c2 319
- i2c3 320
- i2c4 321
- i2c5 322
- i2c6 323
- i2c7 324
- i2c_hdmi 325
- tsadc 326
- spi0 327
- spi1 328
- spi2 329
- i2s1 330
- i2s2 331
- pcm0 332
- i2s0 333
- pcm1 334
- pcm2 335
- pwm 336
- slimbus 337
- spdif 338
- ac97 339
- modemif 340
- chipid 341
- sysreg 342
- hdmi_cec 343
- mct 344
- wdt 345
- rtc 346
- keyif 347
- audss 348
- mipi_hsi 349 Exynos4210
- mdma2 350 Exynos4210
- pixelasyncm0 351
- pixelasyncm1 352
- fimc_lite0 353 Exynos4x12
- fimc_lite1 354 Exynos4x12
- ppmuispx 355 Exynos4x12
- ppmuispmx 356 Exynos4x12
- fimc_isp 357 Exynos4x12
- fimc_drc 358 Exynos4x12
- fimc_fd 359 Exynos4x12
- mcuisp 360 Exynos4x12
- gicisp 361 Exynos4x12
- smmu_isp 362 Exynos4x12
- smmu_drc 363 Exynos4x12
- smmu_fd 364 Exynos4x12
- smmu_lite0 365 Exynos4x12
- smmu_lite1 366 Exynos4x12
- mcuctl_isp 367 Exynos4x12
- mpwm_isp 368 Exynos4x12
- i2c0_isp 369 Exynos4x12
- i2c1_isp 370 Exynos4x12
- mtcadc_isp 371 Exynos4x12
- pwm_isp 372 Exynos4x12
- wdt_isp 373 Exynos4x12
- uart_isp 374 Exynos4x12
- asyncaxim 375 Exynos4x12
- smmu_ispcx 376 Exynos4x12
- spi0_isp 377 Exynos4x12
- spi1_isp 378 Exynos4x12
- pwm_isp_sclk 379 Exynos4x12
- spi0_isp_sclk 380 Exynos4x12
- spi1_isp_sclk 381 Exynos4x12
- uart_isp_sclk 382 Exynos4x12
- tmu_apbif 383
-
- [Mux Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- mout_fimc0 384
- mout_fimc1 385
- mout_fimc2 386
- mout_fimc3 387
- mout_cam0 388
- mout_cam1 389
- mout_csis0 390
- mout_csis1 391
- mout_g3d0 392
- mout_g3d1 393
- mout_g3d 394
- aclk400_mcuisp 395 Exynos4x12
-
- [Div Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- div_isp0 450 Exynos4x12
- div_isp1 451 Exynos4x12
- div_mcuisp0 452 Exynos4x12
- div_mcuisp1 453 Exynos4x12
- div_aclk200 454 Exynos4x12
- div_aclk400_mcuisp 455 Exynos4x12
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
-
- sclk_cam_bayer 128
- sclk_cam0 129
- sclk_cam1 130
- sclk_gscl_wa 131
- sclk_gscl_wb 132
- sclk_fimd1 133
- sclk_mipi1 134
- sclk_dp 135
- sclk_hdmi 136
- sclk_pixel 137
- sclk_audio0 138
- sclk_mmc0 139
- sclk_mmc1 140
- sclk_mmc2 141
- sclk_mmc3 142
- sclk_sata 143
- sclk_usb3 144
- sclk_jpeg 145
- sclk_uart0 146
- sclk_uart1 147
- sclk_uart2 148
- sclk_uart3 149
- sclk_pwm 150
- sclk_audio1 151
- sclk_audio2 152
- sclk_spdif 153
- sclk_spi0 154
- sclk_spi1 155
- sclk_spi2 156
- div_i2s1 157
- div_i2s2 158
- sclk_hdmiphy 159
- div_pcm0 160
-
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- gscl0 256
- gscl1 257
- gscl2 258
- gscl3 259
- gscl_wa 260
- gscl_wb 261
- smmu_gscl0 262
- smmu_gscl1 263
- smmu_gscl2 264
- smmu_gscl3 265
- mfc 266
- smmu_mfcl 267
- smmu_mfcr 268
- rotator 269
- jpeg 270
- mdma1 271
- smmu_rotator 272
- smmu_jpeg 273
- smmu_mdma1 274
- pdma0 275
- pdma1 276
- sata 277
- usbotg 278
- mipi_hsi 279
- sdmmc0 280
- sdmmc1 281
- sdmmc2 282
- sdmmc3 283
- sromc 284
- usb2 285
- usb3 286
- sata_phyctrl 287
- sata_phyi2c 288
- uart0 289
- uart1 290
- uart2 291
- uart3 292
- uart4 293
- i2c0 294
- i2c1 295
- i2c2 296
- i2c3 297
- i2c4 298
- i2c5 299
- i2c6 300
- i2c7 301
- i2c_hdmi 302
- adc 303
- spi0 304
- spi1 305
- spi2 306
- i2s1 307
- i2s2 308
- pcm1 309
- pcm2 310
- pwm 311
- spdif 312
- ac97 313
- hsi2c0 314
- hsi2c1 315
- hs12c2 316
- hs12c3 317
- chipid 318
- sysreg 319
- pmu 320
- cmu_top 321
- cmu_core 322
- cmu_mem 323
- tzpc0 324
- tzpc1 325
- tzpc2 326
- tzpc3 327
- tzpc4 328
- tzpc5 329
- tzpc6 330
- tzpc7 331
- tzpc8 332
- tzpc9 333
- hdmi_cec 334
- mct 335
- wdt 336
- rtc 337
- tmu 338
- fimd1 339
- mie1 340
- dsim0 341
- dp 342
- mixer 343
- hdmi 344
- g2d 345
- mdma0 346
- smmu_mdma0 347
-
-
- [Clock Muxes]
-
- Clock ID
- ----------------------------
- mout_hdmi 1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
- sclk_uart0 128
- sclk_uart1 129
- sclk_uart2 130
- sclk_uart3 131
- sclk_mmc0 132
- sclk_mmc1 133
- sclk_mmc2 134
- sclk_spi0 135
- sclk_spi1 136
- sclk_spi2 137
- sclk_i2s1 138
- sclk_i2s2 139
- sclk_pcm1 140
- sclk_pcm2 141
- sclk_spdif 142
- sclk_hdmi 143
- sclk_pixel 144
- sclk_dp1 145
- sclk_mipi1 146
- sclk_fimd1 147
- sclk_maudio0 148
- sclk_maupcm0 149
- sclk_usbd300 150
- sclk_usbd301 151
- sclk_usbphy300 152
- sclk_usbphy301 153
- sclk_unipro 154
- sclk_pwm 155
- sclk_gscl_wa 156
- sclk_gscl_wb 157
- sclk_hdmiphy 158
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- aclk66_peric 256
- uart0 257
- uart1 258
- uart2 259
- uart3 260
- i2c0 261
- i2c1 262
- i2c2 263
- i2c3 264
- i2c4 265
- i2c5 266
- i2c6 267
- i2c7 268
- i2c_hdmi 269
- tsadc 270
- spi0 271
- spi1 272
- spi2 273
- keyif 274
- i2s1 275
- i2s2 276
- pcm1 277
- pcm2 278
- pwm 279
- spdif 280
- i2c8 281
- i2c9 282
- i2c10 283
- aclk66_psgen 300
- chipid 301
- sysreg 302
- tzpc0 303
- tzpc1 304
- tzpc2 305
- tzpc3 306
- tzpc4 307
- tzpc5 308
- tzpc6 309
- tzpc7 310
- tzpc8 311
- tzpc9 312
- hdmi_cec 313
- seckey 314
- mct 315
- wdt 316
- rtc 317
- tmu 318
- tmu_gpu 319
- pclk66_gpio 330
- aclk200_fsys2 350
- mmc0 351
- mmc1 352
- mmc2 353
- sromc 354
- ufs 355
- aclk200_fsys 360
- tsi 361
- pdma0 362
- pdma1 363
- rtic 364
- usbh20 365
- usbd300 366
- usbd301 377
- aclk400_mscl 380
- mscl0 381
- mscl1 382
- mscl2 383
- smmu_mscl0 384
- smmu_mscl1 385
- smmu_mscl2 386
- aclk333 400
- mfc 401
- smmu_mfcl 402
- smmu_mfcr 403
- aclk200_disp1 410
- dsim1 411
- dp1 412
- hdmi 413
- aclk300_disp1 420
- fimd1 421
- smmu_fimd1 422
- aclk166 430
- mixer 431
- aclk266 440
- rotator 441
- mdma1 442
- smmu_rotator 443
- smmu_mdma1 444
- aclk300_jpeg 450
- jpeg 451
- jpeg2 452
- smmu_jpeg 453
- aclk300_gscl 460
- smmu_gscl0 461
- smmu_gscl1 462
- gscl_wa 463
- gscl_wb 464
- gscl0 465
- gscl1 466
- clk_3aa 467
- aclk266_g2d 470
- sss 471
- slim_sss 472
- mdma0 473
- aclk333_g2d 480
- g2d 481
- aclk333_432_gscl 490
- smmu_3aa 491
- smmu_fimcl0 492
- smmu_fimcl1 493
- smmu_fimcl3 494
- fimc_lite3 495
- aclk_g3d 500
- g3d 501
- smmu_mixer 502
-
- Mux ID
- ----------------------------
-
- mout_hdmi 640
-
- Divider ID
- ----------------------------
-
- dout_pixel 768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- xtal 1
- arm_clk 2
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- spi_baud 16
- pb0_250 17
- pr0_250 18
- pr1_250 19
- b_250 20
- b_125 21
- b_200 22
- sata 23
- usb 24
- gmac0 25
- cs250 26
- pb0_250_o 27
- pr0_250_o 28
- pr1_250_o 29
- b_250_o 30
- b_125_o 31
- b_200_o 32
- sata_o 33
- usb_o 34
- gmac0_o 35
- cs250_o 36
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
Example: An example of a clock controller node is listed below.
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || ARCH_MSM
+ depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
config UNCOMPRESS_INCLUDE
string
- default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+ default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+ ARCH_EXYNOS
default "mach/uncompress.h"
config EARLY_PRINTK
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos4.h>
#include "skeleton.dtsi"
/ {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 84 0>;
- clocks = <&clock 256>, <&clock 128>;
+ clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 257>, <&clock 129>;
+ clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 258>, <&clock 130>;
+ clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
interrupts = <0 87 0>;
- clocks = <&clock 259>, <&clock 131>;
+ clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
interrupts = <0 78 0>;
- clocks = <&clock 260>, <&clock 134>;
+ clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
samsung,power-domain = <&pd_cam>;
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
interrupts = <0 80 0>;
- clocks = <&clock 261>, <&clock 135>;
+ clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
samsung,power-domain = <&pd_cam>;
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
- clocks = <&clock 345>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
};
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
- clocks = <&clock 346>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
};
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
- clocks = <&clock 347>;
+ clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
- clocks = <&clock 297>, <&clock 145>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
- clocks = <&clock 298>, <&clock 146>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
- clocks = <&clock 299>, <&clock 147>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
- clocks = <&clock 300>, <&clock 148>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
interrupts = <0 70 0>;
- clocks = <&clock 304>;
+ clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
};
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
interrupts = <0 70 0>;
- clocks = <&clock 304>;
+ clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
};
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 273>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
- clocks = <&clock 312>, <&clock 151>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
- clocks = <&clock 313>, <&clock 152>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
- clocks = <&clock 315>, <&clock 154>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
- clocks = <&clock 317>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
- clocks = <&clock 319>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
- clocks = <&clock 320>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
- clocks = <&clock 321>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
- clocks = <&clock 322>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
- clocks = <&clock 323>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 324>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
status = "disabled";
};
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 327>, <&clock 159>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 328>, <&clock 160>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 329>, <&clock 161>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
- clocks = <&clock 336>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
status = "disabled";
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 292>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
- clocks = <&clock 293>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 279>;
+ clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
reg = <0x11c00000 0x20000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <11 0>, <11 1>, <11 2>;
- clocks = <&clock 140>, <&clock 283>;
+ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
status = "disabled";
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
- clocks = <&clock 3>, <&clock 344>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
- clocks = <&clock 383>;
+ clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
status = "disabled";
};
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <0 89 0>;
- clocks = <&clock 177>, <&clock 277>;
+ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
- clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>;
- clocks = <&clock 3>, <&clock 344>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
interrupts = <0 89 0>;
- clocks = <&clock 177>, <&clock 277>;
+ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
- clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
reg = <0x12390000 0x1000>;
interrupts = <0 105 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 353>;
+ clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
status = "disabled";
};
reg = <0x123A0000 0x1000>;
interrupts = <0 106 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 354>;
+ clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
status = "disabled";
};
reg = <0x12000000 0x260000>;
interrupts = <0 90 0>, <0 95 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 353>, <&clock 354>, <&clock 355>,
- <&clock 356>, <&clock 17>, <&clock 357>,
- <&clock 358>, <&clock 359>, <&clock 360>,
- <&clock 450>,<&clock 451>, <&clock 452>,
- <&clock 453>, <&clock 176>, <&clock 13>,
- <&clock 454>, <&clock 395>, <&clock 455>;
+ clocks = <&clock CLK_FIMC_LITE0>,
+ <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+ <&clock CLK_PPMUISPMX>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+ <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+ <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+ <&clock CLK_DIV_MCUISP0>,
+ <&clock CLK_DIV_MCUISP1>,
+ <&clock CLK_SCLK_UART_ISP>,
+ <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK400_MCUISP>;
clock-names = "lite0", "lite1", "ppmuispx",
"ppmuispmx", "mpll", "isp",
"drc", "fd", "mcuisp",
i2c1_isp: i2c-isp@12140000 {
compatible = "samsung,exynos4212-i2c-isp";
reg = <0x12140000 0x100>;
- clocks = <&clock 370>;
+ clocks = <&clock CLK_I2C1_ISP>;
clock-names = "i2c_isp";
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
fifo-depth = <0x80>;
- clocks = <&clock 301>, <&clock 149>;
+ clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
clock-names = "biu", "ciu";
status = "disabled";
};
status = "disabled";
};
- watchdog {
- compatible = "samsung,s3c2410-wdt";
- reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
- status = "disabled";
- };
-
fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
bootargs = "console=ttySAC2,115200";
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
codec@11000000 {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
vdd: fixed-regulator@0 {
i2c104 = &i2c_104;
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
pinctrl@11400000 {
sd3_clk: sd3-clk {
samsung,pin-drv = <0>;
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
compatible = "samsung,exynos5250-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
- clocks = <&clock 1>, <&clock 335>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
interrupts = <0 47 0>;
};
- watchdog {
- clocks = <&clock 336>;
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
+ watchdog@101D0000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
};
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
interrupts = <0 91 0>;
- clocks = <&clock 345>;
+ clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
};
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
rtc@101E0000 {
- clocks = <&clock 337>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- status = "okay";
+ status = "disabled";
};
tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 338>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
serial@12C00000 {
- clocks = <&clock 289>, <&clock 146>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 290>, <&clock 147>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 291>, <&clock 148>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 292>, <&clock 149>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
- clocks = <&clock 277>, <&clock 143>;
+ clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
};
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 294>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 295>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 296>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 297>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 298>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 299>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 300>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 301>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 302>;
+ clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
};
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 288>;
+ clocks = <&clock CLK_SATA_PHYI2C>;
clock-names = "i2c";
status = "disabled";
};
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 304>, <&clock 154>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 305>, <&clock 155>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 306>, <&clock 156>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
- clocks = <&clock 280>, <&clock 139>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
- clocks = <&clock 281>, <&clock 140>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 282>, <&clock 141>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 283>, <&clock 142>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
- clocks = <&clock 307>, <&clock 157>;
+ clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
- clocks = <&clock 308>, <&clock 158>;
+ clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
usb@12000000 {
compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock 286>;
+ clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
usb3_phy: usbphy@12100000 {
compatible = "samsung,exynos5250-usb3phy";
reg = <0x12100000 0x100>;
- clocks = <&clock 1>, <&clock 286>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
clock-names = "ext_xtal", "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
usb2_phy: usbphy@12130000 {
compatible = "samsung,exynos5250-usb2phy";
reg = <0x12130000 0x100>;
- clocks = <&clock 1>, <&clock 285>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
clock-names = "ext_xtal", "usbhost";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
- clocks = <&clock 311>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 275>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 276>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 346>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 271>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 256>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
};
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 257>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
};
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 258>;
+ clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
};
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 259>;
+ clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
};
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 344>, <&clock 136>, <&clock 137>,
- <&clock 159>, <&clock 1024>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
};
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 343>, <&clock 136>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
};
dp-controller@145B0000 {
- clocks = <&clock 342>;
+ clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd@14400000 {
- clocks = <&clock 133>, <&clock 339>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>, <0x10040718 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 303>;
+ clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
};
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
+
+ hsi2c_4: i2c@12CA0000 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "PVDD_ALIVE_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "PVDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "PVDD_APIO_MMCON_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "PVDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "PVDD_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "PVDD_ANAIP_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "PVDD_ANAIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "PVDD_ABB_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "PVDD_USB_3V3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "PVDD_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "PVDD_USB_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PVDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "PVDD_APIO_MMCOFF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "PVDD_PERI_2V8";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "PVDD_PERI_3V3";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "PVDD_EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "PVDD_TFLASH_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "PVDD_BTWIFI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "PVDD_CAM1IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "PVDD_MIFS_1V1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "PVDD_CAM1_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "PVDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "PVDD_G3DS_1V0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "PVDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "PVDD_AUDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "PVDD_PERI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "PVDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "PVDD_CAM0IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "PVDD_CAM0_DVDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "PVDD_CAM0_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "PVDD_MIF_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "PVDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "PVDD_G3D_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "PVDD_LPDDR3_1V2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "PVDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "PVDD_EMMCF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "SW-TACT1";
+ gpios = <&gpx2 7 1>;
+ linux,code = <KEY_WAKEUP>;
+ gpio-key,wakeup;
+ };
+ };
};
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ dbvdd: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ spkvdd: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
+ rtc@101E0000 {
+ status = "okay";
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
reg = <0x50>;
};
};
+
+ hsi2c_4: i2c@12CA0000 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5420.h>
#include "exynos5.dtsi"
#include "exynos5420-pinctrl.dtsi"
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
- clocks = <&clock 401>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
- clocks = <&clock 351>, <&clock 132>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
- clocks = <&clock 352>, <&clock 133>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 353>, <&clock 134>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
<8>, <9>, <10>, <11>;
- clocks = <&clock 1>, <&clock 315>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
};
rtc@101E0000 {
- clocks = <&clock 317>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- status = "okay";
+ status = "disabled";
};
amba {
interrupt-parent = <&gic>;
ranges;
+ adma: adma@03880000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x03880000 0x1000>;
+ interrupts = <0 110 0>;
+ clocks = <&clock_audss EXYNOS_ADMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <6>;
+ #dma-requests = <16>;
+ };
+
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 362>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 363>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 473>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 442>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
};
};
+ i2s0: i2s@03830000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x03830000 0x100>;
+ dmas = <&adma 0
+ &adma 2
+ &adma 1>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@12D60000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D60000 0x100>;
+ dmas = <&pdma1 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@12D70000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D70000 0x100>;
+ dmas = <&pdma0 12
+ &pdma0 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ status = "disabled";
+ };
+
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
- clocks = <&clock 271>, <&clock 135>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
- clocks = <&clock 272>, <&clock 136>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
- clocks = <&clock 273>, <&clock 137>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
serial@12C00000 {
- clocks = <&clock 257>, <&clock 128>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 258>, <&clock 129>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 260>, <&clock 131>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
- clocks = <&clock 279>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
};
dp-controller@145B0000 {
- clocks = <&clock 412>;
+ clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
fimd@14400000 {
samsung,power-domain = <&disp_pd>;
- clocks = <&clock 147>, <&clock 421>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 270>;
+ clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 261>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 262>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 263>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 264>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock 265>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock 267>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock 268>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock 281>;
+ clocks = <&clock CLK_I2C8>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock 282>;
+ clocks = <&clock CLK_I2C9>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock 283>;
+ clocks = <&clock CLK_I2C10>;
clock-names = "hsi2c";
status = "disabled";
};
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 413>, <&clock 143>, <&clock 768>,
- <&clock 158>, <&clock 640>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
status = "disabled";
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 431>, <&clock 143>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 465>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 466>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5420-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
interrupts = <0 183 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
interrupts = <0 184 0>;
- clocks = <&clock 318>, <&clock 318>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
interrupts = <0 185 0>;
- clocks = <&clock 318>, <&clock 319>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
interrupts = <0 215 0>;
- clocks = <&clock 319>, <&clock 318>;
+ clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
+
+ watchdog@101D0000 {
+ compatible = "samsung,exynos5420-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
};
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5440.h>
#include "skeleton.dtsi"
/ {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
#size-cells = <0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
- clocks = <&clock 21>, <&clock 16>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
clock-names = "spi", "spi_busclk0";
};
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
interrupts = <0 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
- clocks = <&clock 25>;
+ clocks = <&clock CLK_GMAC0>;
clock-names = "stmmaceth";
};
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
interrupts = <0 30 0>;
- clocks = <&clock 23>;
+ clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
0x270000 0x1000
0x271000 0x40>;
interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
- clocks = <&clock 28>, <&clock 27>;
+ clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
0x272000 0x1000
0x271040 0x40>;
interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
- clocks = <&clock 29>, <&clock 27>;
+ clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
* published by the Free Software Foundation.
*/
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
/* The S5PV210/S5PC110 implementations are as belows. */
#include <clocksource/samsung_pwm.h>
#include <linux/sched.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include "common.h"
#include "regs-pmu.h"
+++ /dev/null
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
- return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
- u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
- /*
- * product_id is bits 31:12
- * bits 23:20 describe the exynosX family
- * bits 27:24 describe the exynosX family in exynos5420
- */
- chip_id >>= 20;
-
- if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
- uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
- else
- uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
- /*
- * For preventing FIFO overrun or infinite loop of UART console,
- * fifo_max should be the minimum fifo size of all of the UART channels
- */
- fifo_mask = S5PV210_UFSTAT_TXMASK;
- fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
#include "common.h"
#include "regs-pmu.h"
-#define EXYNOS4_EPLL_LOCK (S5P_VA_CMU + 0x0C010)
-#define EXYNOS4_VPLL_LOCK (S5P_VA_CMU + 0x0C020)
-
-#define EXYNOS4_EPLL_CON0 (S5P_VA_CMU + 0x0C110)
-#define EXYNOS4_EPLL_CON1 (S5P_VA_CMU + 0x0C114)
-#define EXYNOS4_VPLL_CON0 (S5P_VA_CMU + 0x0C120)
-#define EXYNOS4_VPLL_CON1 (S5P_VA_CMU + 0x0C124)
-
-#define EXYNOS4_CLKSRC_MASK_TOP (S5P_VA_CMU + 0x0C310)
-#define EXYNOS4_CLKSRC_MASK_CAM (S5P_VA_CMU + 0x0C320)
-#define EXYNOS4_CLKSRC_MASK_TV (S5P_VA_CMU + 0x0C324)
-#define EXYNOS4_CLKSRC_MASK_LCD0 (S5P_VA_CMU + 0x0C334)
-#define EXYNOS4_CLKSRC_MASK_MAUDIO (S5P_VA_CMU + 0x0C33C)
-#define EXYNOS4_CLKSRC_MASK_FSYS (S5P_VA_CMU + 0x0C340)
-#define EXYNOS4_CLKSRC_MASK_PERIL0 (S5P_VA_CMU + 0x0C350)
-#define EXYNOS4_CLKSRC_MASK_PERIL1 (S5P_VA_CMU + 0x0C354)
-
-#define EXYNOS4_CLKSRC_MASK_DMC (S5P_VA_CMU + 0x10300)
-
-#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
-#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
-
-#define EXYNOS4210_CLKSRC_MASK_LCD1 (S5P_VA_CMU + 0x0C338)
-
-static const struct sleep_save exynos4_set_clksrc[] = {
- { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
- { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
- { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
- { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
- { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
- { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
- { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
- { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
-};
-
-static const struct sleep_save exynos4210_set_clksrc[] = {
- { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
- SAVE_ITEM(EXYNOS4_EPLL_CON0),
- SAVE_ITEM(EXYNOS4_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
- SAVE_ITEM(EXYNOS4_VPLL_CON0),
- SAVE_ITEM(EXYNOS4_VPLL_CON1),
-};
-
static struct sleep_save exynos5_sys_save[] = {
SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
};
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
- if (!soc_is_exynos5250()) {
- s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
- s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
- } else {
+ if (soc_is_exynos5250()) {
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
/* Disable USE_RETENTION of JPEG_MEM_OPTION */
tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
/* ensure at least INFORM0 has the resume address */
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
- /* Before enter central sequence mode, clock src register have to set */
-
- if (!soc_is_exynos5250())
- s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
-
- if (soc_is_exynos4210())
- s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
-
}
static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
return 0;
}
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
-{
- unsigned long pll_con, locktime, lockcnt;
- unsigned long pll_in_rate;
- unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
- if (pll_base_rate == 0)
- return;
-
- pll_in_rate = pll_base_rate;
-
- /* EPLL */
- pll_con = exynos4_epll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
- p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
-
- pll_in_rate /= 1000000;
-
- locktime = (3000 / pll_in_rate) * p_div;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_epll_save,
- ARRAY_SIZE(exynos4_epll_save));
- epll_wait = 1;
- }
-
- pll_in_rate = pll_base_rate;
-
- /* VPLL */
- pll_con = exynos4_vpll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_in_rate /= 1000000;
- /* 750us */
- locktime = 750;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_vpll_save,
- ARRAY_SIZE(exynos4_vpll_save));
- vpll_wait = 1;
- }
-
- /* Wait PLL locking */
-
- do {
- if (epll_wait) {
- pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
- if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
- epll_wait = 0;
- }
-
- if (vpll_wait) {
- pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
- if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
- vpll_wait = 0;
- }
- } while (epll_wait || vpll_wait);
-}
-
static struct subsys_interface exynos_pm_interface = {
.name = "exynos_pm",
.subsys = &exynos_subsys,
static __init int exynos_pm_drvinit(void)
{
- struct clk *pll_base;
unsigned int tmp;
if (soc_is_exynos5440())
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
- if (!soc_is_exynos5250()) {
- pll_base = clk_get(NULL, "xtal");
-
- if (!IS_ERR(pll_base)) {
- pll_base_rate = clk_get_rate(pll_base);
- clk_put(pll_base);
- }
- }
-
return subsys_interface_register(&exynos_pm_interface);
}
arch_initcall(exynos_pm_drvinit);
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
- if (!soc_is_exynos5250()) {
- exynos4_restore_pll();
-
-#ifdef CONFIG_SMP
+ if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
-#endif
- }
early_wakeup:
#include <linux/of_platform.h>
#include <linux/sched.h>
-#include <plat/devs.h>
-
#include "regs-pmu.h"
/*
select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_GPIO_EXTRA128
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/hardware.h>
#include <linux/atomic.h>
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
/* S3C2440 extended clock support */
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <mach/dma.h>
#include <plat/cpu.h>
} else {
samsung_cpu_id = s3c24xx_read_idcode_v4();
}
- s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/dma-s3c24xx.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <mach/dma.h>
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <mach/dma.h>
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
--- /dev/null
+/*
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+extern struct platform_device s3c_device_rtc;
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+ s3c_device_rtc.name = name;
+}
+
+#endif /* __RTC_CORE_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
- return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/dm9000.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
#include <linux/gpio.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
#include <linux/ata_platform.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include <linux/gpio.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/dm9000.h>
#include <linux/platform_data/at24.h>
#include <linux/platform_device.h>
#include <mach/fb.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <asm/mach/map.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/io.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/device.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include <plat/gpio-cfg.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include "common.h"
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/regs-s3c2443-clock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/regs-irq.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/reboot.h>
#include <plat/nand-core.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include "common.h"
#include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
#include <plat/spi-core.h>
#include "common.h"
#include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
#include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/device.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/clock.h>
*/
#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include "regs-mem.h"
*/
#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
#include <plat/irq-uart.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/gpio-samsung.h>
#include <plat/fb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
#include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <linux/platform_data/hwmon-s3c.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
-
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <plat/gpio-cfg.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#include <plat/regs-serial.h>
-
.macro addruart, rp, rv, tmp
mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <plat/regs-serial.h>
#include <plat/pm.h>
#include <mach/regs-gpio.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <plat/onenand-core.h>
#include <plat/pwm-core.h>
#include <plat/spi-core.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
+++ /dev/null
-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <plat/pwm-core.h>
#include <plat/tv-core.h>
#include <plat/spi-core.h>
-#include <plat/regs-serial.h>
#include "common.h"
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/i2c.h>
#include <linux/device.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/device.h>
#include <linux/dm9000.h>
#include <linux/fb.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
#include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */
/* clock information */
}
EXPORT_SYMBOL(samsung_rev);
-void __init s3c24xx_init_cpu(void)
-{
- /* nothing here yet */
-
- samsung_cpu_rev = 0;
-}
-
void __init s3c64xx_init_cpu(void)
{
samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/usb-phy.h>
-#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include <linux/platform_data/spi-s3c64xx.h>
if (!pd) {
pd = &default_i2c_data;
- if (soc_is_exynos4210() ||
- soc_is_exynos4212() || soc_is_exynos4412())
- pd->bus_num = 8;
- else if (soc_is_s5pv210())
+ if (soc_is_s5pv210())
pd->bus_num = 3;
else
pd->bus_num = 0;
{
struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
- if (soc_is_exynos4210() ||
- soc_is_exynos4212() || soc_is_exynos4412())
- pd->hdmiphy_bus = 8;
- else if (soc_is_s5pv210())
+ if (soc_is_s5pv210())
pd->hdmiphy_bus = 3;
else
pd->hdmiphy_bus = 0;
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
+++ /dev/null
-#include <linux/serial_s3c.h>
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
-#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
- s3c_device_rtc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_RTC_CORE_H */
/* defines for UART registers */
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
/* working in physical space... */
#define S3C_WDOGREG(x) ((S3C_PA_WDT + (x)))
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/regs-serial.h>
-
static struct cpu_table *cpu;
static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
.resume = samsung_gpio_pm_2bit_resume,
};
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \
- || defined(CONFIG_ARCH_EXYNOS)
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
.save = samsung_gpio_pm_4bit_save,
.resume = samsung_gpio_pm_4bit_resume,
};
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
* samsung_pm_save_gpio() - save gpio chip data for suspend
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <plat/regs-serial.h>
-
#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-
-#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-irq.h>
-#endif
/* state for IRQs over sleep */
unsigned long irqbit;
unsigned int irq_rtc_tic, irq_rtc_alarm;
-#ifdef CONFIG_ARCH_EXYNOS
- if (soc_is_exynos5250()) {
- irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
- } else {
- irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
- }
-#else
irq_rtc_tic = IRQ_RTC_TIC;
irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+static enum exynos4_soc exynos4_soc;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos4_save_common;
+static struct samsung_clk_reg_dump *exynos4_save_soc;
+static struct samsung_clk_reg_dump *exynos4_save_pll;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
E4X12_MPLL_CON0,
};
+static unsigned long exynos4_clk_pll_regs[] __initdata = {
+ EPLL_LOCK,
+ VPLL_LOCK,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ VPLL_CON0,
+ VPLL_CON1,
+ VPLL_CON2,
+};
+
static unsigned long exynos4_clk_regs[] __initdata = {
SRC_LEFTBUS,
DIV_LEFTBUS,
SRC_RIGHTBUS,
DIV_RIGHTBUS,
GATE_IP_RIGHTBUS,
- EPLL_CON0,
- EPLL_CON1,
- EPLL_CON2,
- VPLL_CON0,
- VPLL_CON1,
- VPLL_CON2,
SRC_TOP0,
SRC_TOP1,
SRC_CAM,
GATE_IP_CPU,
};
+static const struct samsung_clk_reg_dump src_mask_suspend[] = {
+ { .offset = SRC_MASK_TOP, .value = 0x00000001, },
+ { .offset = SRC_MASK_CAM, .value = 0x11111111, },
+ { .offset = SRC_MASK_TV, .value = 0x00000111, },
+ { .offset = SRC_MASK_LCD0, .value = 0x00001111, },
+ { .offset = SRC_MASK_MAUDIO, .value = 0x00000001, },
+ { .offset = SRC_MASK_FSYS, .value = 0x01011111, },
+ { .offset = SRC_MASK_PERIL0, .value = 0x01111111, },
+ { .offset = SRC_MASK_PERIL1, .value = 0x01110111, },
+ { .offset = SRC_MASK_DMC, .value = 0x00010000, },
+};
+
+static const struct samsung_clk_reg_dump src_mask_suspend_e4210[] = {
+ { .offset = E4210_SRC_MASK_LCD1, .value = 0x00001111, },
+};
+
+#define PLL_ENABLED (1 << 31)
+#define PLL_LOCKED (1 << 29)
+
+static void exynos4_clk_wait_for_pll(u32 reg)
+{
+ u32 pll_con;
+
+ pll_con = readl(reg_base + reg);
+ if (!(pll_con & PLL_ENABLED))
+ return;
+
+ while (!(pll_con & PLL_LOCKED)) {
+ cpu_relax();
+ pll_con = readl(reg_base + reg);
+ }
+}
+
+static int exynos4_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos4_save_common,
+ ARRAY_SIZE(exynos4_clk_regs));
+ samsung_clk_save(reg_base, exynos4_save_pll,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+
+ if (exynos4_soc == EXYNOS4210) {
+ samsung_clk_save(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4210_clk_save));
+ samsung_clk_restore(reg_base, src_mask_suspend_e4210,
+ ARRAY_SIZE(src_mask_suspend_e4210));
+ } else {
+ samsung_clk_save(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4x12_clk_save));
+ }
+
+ samsung_clk_restore(reg_base, src_mask_suspend,
+ ARRAY_SIZE(src_mask_suspend));
+
+ return 0;
+}
+
+static void exynos4_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos4_save_pll,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+
+ exynos4_clk_wait_for_pll(EPLL_CON0);
+ exynos4_clk_wait_for_pll(VPLL_CON0);
+
+ samsung_clk_restore(reg_base, exynos4_save_common,
+ ARRAY_SIZE(exynos4_clk_regs));
+
+ if (exynos4_soc == EXYNOS4210)
+ samsung_clk_restore(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4210_clk_save));
+ else
+ samsung_clk_restore(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4x12_clk_save));
+}
+
+static struct syscore_ops exynos4_clk_syscore_ops = {
+ .suspend = exynos4_clk_suspend,
+ .resume = exynos4_clk_resume,
+};
+
+static void exynos4_clk_sleep_init(void)
+{
+ exynos4_save_common = samsung_clk_alloc_reg_dump(exynos4_clk_regs,
+ ARRAY_SIZE(exynos4_clk_regs));
+ if (!exynos4_save_common)
+ goto err_warn;
+
+ if (exynos4_soc == EXYNOS4210)
+ exynos4_save_soc = samsung_clk_alloc_reg_dump(
+ exynos4210_clk_save,
+ ARRAY_SIZE(exynos4210_clk_save));
+ else
+ exynos4_save_soc = samsung_clk_alloc_reg_dump(
+ exynos4x12_clk_save,
+ ARRAY_SIZE(exynos4x12_clk_save));
+ if (!exynos4_save_soc)
+ goto err_common;
+
+ exynos4_save_pll = samsung_clk_alloc_reg_dump(exynos4_clk_pll_regs,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+ if (!exynos4_save_pll)
+ goto err_soc;
+
+ register_syscore_ops(&exynos4_clk_syscore_ops);
+ return;
+
+err_soc:
+ kfree(exynos4_save_soc);
+err_common:
+ kfree(exynos4_save_common);
+err_warn:
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+}
+#else
+static void exynos4_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clock list */
PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
return xom;
}
-static void __init exynos4_clk_register_finpll(unsigned long xom)
+static void __init exynos4_clk_register_finpll(void)
{
struct samsung_fixed_rate_clock fclk;
struct clk *clk;
unsigned long finpll_f = 24000000;
char *parent_name;
+ unsigned int xom = exynos4_get_xom();
parent_name = xom & 1 ? "xusbxti" : "xxti";
clk = clk_get(NULL, parent_name);
/* register exynos4 clocks */
static void __init exynos4_clk_init(struct device_node *np,
- enum exynos4_soc exynos4_soc,
- void __iomem *reg_base, unsigned long xom)
+ enum exynos4_soc soc)
{
+ exynos4_soc = soc;
+
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
- if (exynos4_soc == EXYNOS4210)
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
- exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save));
- else
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
- exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save));
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
ext_clk_match);
- exynos4_clk_register_finpll(xom);
+ exynos4_clk_register_finpll();
if (exynos4_soc == EXYNOS4210) {
samsung_clk_register_mux(exynos4210_mux_early,
samsung_clk_register_alias(exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
+ exynos4_clk_sleep_init();
+
pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
"\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
static void __init exynos4210_clk_init(struct device_node *np)
{
- exynos4_clk_init(np, EXYNOS4210, NULL, exynos4_get_xom());
+ exynos4_clk_init(np, EXYNOS4210);
}
CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
static void __init exynos4412_clk_init(struct device_node *np)
{
- exynos4_clk_init(np, EXYNOS4X12, NULL, exynos4_get_xom());
+ exynos4_clk_init(np, EXYNOS4X12);
}
CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos5250_save;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
GATE_IP_ACP,
};
+static int exynos5250_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos5250_save,
+ ARRAY_SIZE(exynos5250_clk_regs));
+
+ return 0;
+}
+
+static void exynos5250_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos5250_save,
+ ARRAY_SIZE(exynos5250_clk_regs));
+}
+
+static struct syscore_ops exynos5250_clk_syscore_ops = {
+ .suspend = exynos5250_clk_suspend,
+ .resume = exynos5250_clk_resume,
+};
+
+static void exynos5250_clk_sleep_init(void)
+{
+ exynos5250_save = samsung_clk_alloc_reg_dump(exynos5250_clk_regs,
+ ARRAY_SIZE(exynos5250_clk_regs));
+ if (!exynos5250_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&exynos5250_clk_syscore_ops);
+}
+#else
+static void exynos5250_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clock list */
PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", };
/* register exynox5250 clocks */
static void __init exynos5250_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
-
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs),
- NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
ext_clk_match);
samsung_clk_register_gate(exynos5250_gate_clks,
ARRAY_SIZE(exynos5250_gate_clks));
+ exynos5250_clk_sleep_init();
+
pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
_get_rate("div_arm2"));
}
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos5420_save;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
DIV_KFC0,
};
+static int exynos5420_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+
+ return 0;
+}
+
+static void exynos5420_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+}
+
+static struct syscore_ops exynos5420_clk_syscore_ops = {
+ .suspend = exynos5420_clk_suspend,
+ .resume = exynos5420_clk_resume,
+};
+
+static void exynos5420_clk_sleep_init(void)
+{
+ exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
+ ARRAY_SIZE(exynos5420_clk_regs));
+ if (!exynos5420_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&exynos5420_clk_syscore_ops);
+}
+#else
+static void exynos5420_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clocks */
PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll",
"sclk_mpll", "sclk_spll" };
/* register exynos5420 clocks */
static void __init exynos5420_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
-
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos5420_clk_regs, ARRAY_SIZE(exynos5420_clk_regs),
- NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
ext_clk_match);
ARRAY_SIZE(exynos5420_div_clks));
samsung_clk_register_gate(exynos5420_gate_clks,
ARRAY_SIZE(exynos5420_gate_clks));
+
+ exynos5420_clk_sleep_init();
}
CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
return;
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS, NULL, 0, NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
apll, mpll, epll,
};
+static void __iomem *reg_base;
+static bool is_s3c6400;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c64xx_save_common;
+static struct samsung_clk_reg_dump *s3c64xx_save_soc;
+
/*
* List of controller registers to be saved and restored during
* a suspend/resume cycle.
MEM0_GATE,
};
+static int s3c64xx_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c64xx_save_common,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+
+ if (!is_s3c6400)
+ samsung_clk_save(reg_base, s3c64xx_save_soc,
+ ARRAY_SIZE(s3c6410_clk_regs));
+
+ return 0;
+}
+
+static void s3c64xx_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c64xx_save_common,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+
+ if (!is_s3c6400)
+ samsung_clk_restore(reg_base, s3c64xx_save_soc,
+ ARRAY_SIZE(s3c6410_clk_regs));
+}
+
+static struct syscore_ops s3c64xx_clk_syscore_ops = {
+ .suspend = s3c64xx_clk_suspend,
+ .resume = s3c64xx_clk_resume,
+};
+
+static void s3c64xx_clk_sleep_init(void)
+{
+ s3c64xx_save_common = samsung_clk_alloc_reg_dump(s3c64xx_clk_regs,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+ if (!s3c64xx_save_common)
+ goto err_warn;
+
+ if (!is_s3c6400) {
+ s3c64xx_save_soc = samsung_clk_alloc_reg_dump(s3c6410_clk_regs,
+ ARRAY_SIZE(s3c6410_clk_regs));
+ if (!s3c64xx_save_soc)
+ goto err_soc;
+ }
+
+ register_syscore_ops(&s3c64xx_clk_syscore_ops);
+ return;
+
+err_soc:
+ kfree(s3c64xx_save_common);
+err_warn:
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+}
+#else
+static void s3c64xx_clk_sleep_init(void) {}
+#endif
+
/* List of parent clocks common for all S3C64xx SoCs. */
PNAME(spi_mmc_p) = { "mout_epll", "dout_mpll", "fin_pll", "clk27m" };
PNAME(uart_p) = { "mout_epll", "dout_mpll" };
/* Register s3c64xx clocks. */
void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
- unsigned long xusbxti_f, bool is_s3c6400,
- void __iomem *reg_base)
+ unsigned long xusbxti_f, bool s3c6400,
+ void __iomem *base)
{
- unsigned long *soc_regs = NULL;
- unsigned long nr_soc_regs = 0;
+ reg_base = base;
+ is_s3c6400 = s3c6400;
if (np) {
reg_base = of_iomap(np, 0);
panic("%s: failed to map registers\n", __func__);
}
- if (!is_s3c6400) {
- soc_regs = s3c6410_clk_regs;
- nr_soc_regs = ARRAY_SIZE(s3c6410_clk_regs);
- }
-
- samsung_clk_init(np, reg_base, NR_CLKS, s3c64xx_clk_regs,
- ARRAY_SIZE(s3c64xx_clk_regs), soc_regs, nr_soc_regs);
+ samsung_clk_init(np, reg_base, NR_CLKS);
/* Register external clocks. */
if (!np)
samsung_clk_register_alias(s3c64xx_clock_aliases,
ARRAY_SIZE(s3c64xx_clock_aliases));
+ s3c64xx_clk_sleep_init();
pr_info("%s clocks: apll = %lu, mpll = %lu\n"
"\tepll = %lu, arm_clk = %lu\n",
static struct clk_onecell_data clk_data;
#endif
-#ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *reg_dump;
-static unsigned long nr_reg_dump;
-
-static int samsung_clk_suspend(void)
+void samsung_clk_save(void __iomem *base,
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs)
{
- struct samsung_clk_reg_dump *rd = reg_dump;
- unsigned long i;
-
- for (i = 0; i < nr_reg_dump; i++, rd++)
- rd->value = __raw_readl(reg_base + rd->offset);
+ for (; num_regs > 0; --num_regs, ++rd)
+ rd->value = readl(base + rd->offset);
+}
- return 0;
+void samsung_clk_restore(void __iomem *base,
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ writel(rd->value, base + rd->offset);
}
-static void samsung_clk_resume(void)
+struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump)
{
- struct samsung_clk_reg_dump *rd = reg_dump;
- unsigned long i;
+ struct samsung_clk_reg_dump *rd;
+ unsigned int i;
- for (i = 0; i < nr_reg_dump; i++, rd++)
- __raw_writel(rd->value, reg_base + rd->offset);
-}
+ rd = kcalloc(nr_rdump, sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return NULL;
+
+ for (i = 0; i < nr_rdump; ++i)
+ rd[i].offset = rdump[i];
-static struct syscore_ops samsung_clk_syscore_ops = {
- .suspend = samsung_clk_suspend,
- .resume = samsung_clk_resume,
-};
-#endif /* CONFIG_PM_SLEEP */
+ return rd;
+}
/* setup the essentials required to support clock lookup using ccf */
void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks, unsigned long *rdump,
- unsigned long nr_rdump, unsigned long *soc_rdump,
- unsigned long nr_soc_rdump)
+ unsigned long nr_clks)
{
reg_base = base;
-#ifdef CONFIG_PM_SLEEP
- if (rdump && nr_rdump) {
- unsigned int idx;
- reg_dump = kzalloc(sizeof(struct samsung_clk_reg_dump)
- * (nr_rdump + nr_soc_rdump), GFP_KERNEL);
- if (!reg_dump) {
- pr_err("%s: memory alloc for register dump failed\n",
- __func__);
- return;
- }
-
- for (idx = 0; idx < nr_rdump; idx++)
- reg_dump[idx].offset = rdump[idx];
- for (idx = 0; idx < nr_soc_rdump; idx++)
- reg_dump[nr_rdump + idx].offset = soc_rdump[idx];
- nr_reg_dump = nr_rdump + nr_soc_rdump;
- register_syscore_ops(&samsung_clk_syscore_ops);
- }
-#endif
-
clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
if (!clk_table)
panic("could not allocate clock lookup table\n");
_lock, _con, _rtable, _alias)
extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks, unsigned long *rdump,
- unsigned long nr_rdump, unsigned long *soc_rdump,
- unsigned long nr_soc_rdump);
+ unsigned long nr_clks);
extern void __init samsung_clk_of_register_fixed_ext(
struct samsung_fixed_rate_clock *fixed_rate_clk,
unsigned int nr_fixed_rate_clk,
extern unsigned long _get_rate(const char *clk_name);
+extern void samsung_clk_save(void __iomem *base,
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
+extern void samsung_clk_restore(void __iomem *base,
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
+extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump);
+
#endif /* __SAMSUNG_CLK_H */
projects / linux-2.6-microblaze.git / commitdiff