Pull GPIO fixes from Linus Walleij:
"A last set of small fixes for GPIO, this cycle was quite busy.
- Fix debounce delays on the MAX77620 GPIO expander
- Use the correct unit for debounce times on the
BD70528 GPIO expander
- Get proper deps for parallel builds of the GPIO tools
- Add a specific ACPI quirk for the Terra Pad 1061"
* tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
tools: gpio: Correctly add make dependencies for gpio_utils
gpio:
bd70528: Use correct unit for debounce times
gpio: max77620: Fixup debounce delays
case 0:
val = BD70528_DEBOUNCE_DISABLE;
break;
- case 1 ... 15:
+ case 1 ... 15000:
val = BD70528_DEBOUNCE_15MS;
break;
- case 16 ... 30:
+ case 15001 ... 30000:
val = BD70528_DEBOUNCE_30MS;
break;
- case 31 ... 50:
+ case 30001 ... 50000:
val = BD70528_DEBOUNCE_50MS;
break;
default:
case 0:
val = MAX77620_CNFG_GPIO_DBNC_None;
break;
- case 1000 ... 8000:
+ case 1 ... 8000:
val = MAX77620_CNFG_GPIO_DBNC_8ms;
break;
- case 9000 ... 16000:
+ case 8001 ... 16000:
val = MAX77620_CNFG_GPIO_DBNC_16ms;
break;
- case 17000 ... 32000:
+ case 16001 ... 32000:
val = MAX77620_CNFG_GPIO_DBNC_32ms;
break;
default:
static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
{
+ /*
+ * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
+ * a non existing micro-USB-B connector which puts the HDMI
+ * DDC pins in GPIO mode, breaking HDMI support.
+ */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
}
},
+ {
+ /*
+ * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
+ * instead of controlling the actual micro-USB-B turns the 5V
+ * boost for its USB-A connector off. The actual micro-USB-B
+ * connector is wired for charging only.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
+ }
+ },
{} /* Terminating entry */
};
+gpio-utils-y += gpio-utils.o
lsgpio-y += lsgpio.o gpio-utils.o
gpio-hammer-y += gpio-hammer.o gpio-utils.o
gpio-event-mon-y += gpio-event-mon.o gpio-utils.o
prepare: $(OUTPUT)include/linux/gpio.h
+GPIO_UTILS_IN := $(output)gpio-utils-in.o
+$(GPIO_UTILS_IN): prepare FORCE
+ $(Q)$(MAKE) $(build)=gpio-utils
+
#
# lsgpio
#
LSGPIO_IN := $(OUTPUT)lsgpio-in.o
-$(LSGPIO_IN): prepare FORCE
+$(LSGPIO_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
$(Q)$(MAKE) $(build)=lsgpio
$(OUTPUT)lsgpio: $(LSGPIO_IN)
$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
# gpio-hammer
#
GPIO_HAMMER_IN := $(OUTPUT)gpio-hammer-in.o
-$(GPIO_HAMMER_IN): prepare FORCE
+$(GPIO_HAMMER_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
$(Q)$(MAKE) $(build)=gpio-hammer
$(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN)
$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
# gpio-event-mon
#
GPIO_EVENT_MON_IN := $(OUTPUT)gpio-event-mon-in.o
-$(GPIO_EVENT_MON_IN): prepare FORCE
+$(GPIO_EVENT_MON_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
$(Q)$(MAKE) $(build)=gpio-event-mon
$(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN)
$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@