hwmon: (lm90) Do not report 'busy' status bit as alarm

Bit 7 of the status register indicates that the chip is busy
doing a conversion. It does not indicate an alarm status.
Stop reporting it as alarm status bit.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index dd8612a..74019df 100644 (file)
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -200,6 +200,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_STATUS_RHIGH      (1 << 4) /* remote high temp limit tripped */
 #define LM90_STATUS_LLOW       (1 << 5) /* local low temp limit tripped */
 #define LM90_STATUS_LHIGH      (1 << 6) /* local high temp limit tripped */
+#define LM90_STATUS_BUSY       (1 << 7) /* conversion is ongoing */
 
 #define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */
 #define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */
@@ -820,7 +821,7 @@ static int lm90_update_device(struct device *dev)
                val = lm90_read_reg(client, LM90_REG_R_STATUS);
                if (val < 0)
                        return val;
-               data->alarms = val;     /* lower 8 bit of alarms */
+               data->alarms = val & ~LM90_STATUS_BUSY;
 
                if (data->kind == max6696) {
                        val = lm90_select_remote_channel(data, 1);