},
};
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
- .name = "usb_host_hs",
- .sysc = &omap54xx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
- .name = "usb_host_hs",
- .class = &omap54xx_usb_host_hs_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- /*
- * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- * id: i660
- *
- * Description:
- * In the following configuration :
- * - USBHOST module is set to smart-idle mode
- * - PRCM asserts idle_req to the USBHOST module ( This typically
- * happens when the system is going to a low power mode : all ports
- * have been suspended, the master part of the USBHOST module has
- * entered the standby state, and SW has cut the functional clocks)
- * - an USBHOST interrupt occurs before the module is able to answer
- * idle_ack, typically a remote wakeup IRQ.
- * Then the USB HOST module will enter a deadlock situation where it
- * is no more accessible nor functional.
- *
- * Workaround:
- * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
- */
-
- /*
- * Errata: USB host EHCI may stall when entering smart-standby mode
- * Id: i571
- *
- * Description:
- * When the USBHOST module is set to smart-standby mode, and when it is
- * ready to enter the standby state (i.e. all ports are suspended and
- * all attached devices are in suspend mode), then it can wrongly assert
- * the Mstandby signal too early while there are still some residual OCP
- * transactions ongoing. If this condition occurs, the internal state
- * machine may go to an undefined state and the USB link may be stuck
- * upon the next resume.
- *
- * Workaround:
- * Don't use smart standby; use only force standby,
- * hence HWMOD_SWSUP_MSTANDBY
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
- .main_clk = "l3init_60m_fclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
- .name = "usb_tll_hs",
- .sysc = &omap54xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
- .name = "usb_tll_hs",
- .class = &omap54xx_usb_tll_hs_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
/*
* 'sata' class
* sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx)
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> usb_host_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_usb_host_hs_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_tll_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_usb_tll_hs_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_1__dmm,
&omap54xx_l3_main_3__l3_instr,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_cfg__mpu,
- &omap54xx_l4_cfg__usb_host_hs,
- &omap54xx_l4_cfg__usb_tll_hs,
&omap54xx_l4_cfg__sata,
NULL,
};