"mediatek,mt6592"
"mediatek,mt8127"
"mediatek,mt8135"
+ "mediatek,mt8173"
Supported boards:
- MTK mt8135 tablet EVB:
Required root node properties:
- compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+- MTK mt8173 tablet EVB:
+ Required root node properties:
+ - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
Required properties:
- compatible: should be one of:
+ "mediatek,mt8173-sysirq"
"mediatek,mt8135-sysirq"
"mediatek,mt8127-sysirq"
"mediatek,mt6592-sysirq"
- "samsung,exynos5260-pmu" - for Exynos5260 SoC.
- "samsung,exynos5410-pmu" - for Exynos5410 SoC,
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+ - "samsung,exynos7-pmu" - for Exynos7 SoC.
second value must be always "syscon".
- reg : offset and length of the register set.
- compatible should contain:
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8173-uart" for MT8173 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577)
+ * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582,
+ MT6577)
- reg: The base address of the UART register bank.
menu "Platform selection"
+config ARCH_EXYNOS
+ bool
+ help
+ This enables support for Samsung Exynos SoC family
+
+config ARCH_EXYNOS7
+ bool "ARMv8 based Samsung Exynos7"
+ select ARCH_EXYNOS
+ select COMMON_CLK_SAMSUNG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select PINCTRL
+ select PINCTRL_EXYNOS
+
+ help
+ This enables support for Samsung Exynos7 SoC family
+
+config ARCH_FSL_LS2085A
+ bool "Freescale LS2085A SOC"
+ help
+ This enables support for Freescale LS2085A SOC.
+
+config ARCH_MEDIATEK
+ bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
+ select ARM_GIC
+ help
+ Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
+
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
+config ARCH_TEGRA
+ bool "NVIDIA Tegra SoC Family"
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select PINCTRL
+ select RESET_CONTROLLER
+ help
+ This enables support for the NVIDIA Tegra SoC family.
+
+config ARCH_TEGRA_132_SOC
+ bool "NVIDIA Tegra132 SoC"
+ depends on ARCH_TEGRA
+ select PINCTRL_TEGRA124
+ select USB_ULPI if USB_PHY
+ select USB_ULPI_VIEWPORT if USB_PHY
+ help
+ Enable support for NVIDIA Tegra132 SoC, based on the Denver
+ ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
+ but contains an NVIDIA Denver CPU complex in place of
+ Tegra124's "4+1" Cortex-A15 CPU complex.
+
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
dts-dirs += apm
dts-dirs += arm
dts-dirs += cavium
+dts-dirs += exynos
+dts-dirs += freescale
+dts-dirs += mediatek
subdir-y := $(dts-dirs)
--- /dev/null
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+ model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+ compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+ aliases {
+ serial0 = &serial_2;
+ mshc0 = &mmc_0;
+ mshc2 = &mmc_2;
+ };
+
+ chosen {
+ linux,stdout-path = &serial_2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0xC0000000>;
+ };
+};
+
+&fin_pll {
+ clock-frequency = <24000000>;
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-mmc-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ clock-frequency = <800000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+};
--- /dev/null
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_alive {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa3: gpa3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_bus0 {
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd2: gpd2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd4: gpd4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd5: gpd5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd6: gpd6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd7: gpd7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd8: gpd8 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c10_bus: hs-i2c10-bus {
+ samsung,pins = "gpb0-1", "gpb0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c11_bus: hs-i2c11-bus {
+ samsung,pins = "gpb0-3", "gpb0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c2_bus: hs-i2c2-bus {
+ samsung,pins = "gpd0-3", "gpd0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpd1-4", "gpd1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c3_bus: hs-i2c3-bus {
+ samsung,pins = "gpd1-3", "gpd1-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c0_bus: hs-i2c0-bus {
+ samsung,pins = "gpd2-1", "gpd2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c1_bus: hs-i2c1-bus {
+ samsung,pins = "gpd2-3", "gpd2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c9_bus: hs-i2c9-bus {
+ samsung,pins = "gpd2-7", "gpd2-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd2-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c8_bus: hs-i2c8-bus {
+ samsung,pins = "gpd5-3", "gpd5-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpd5-0", "gpd5-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c4_bus: hs-i2c4-bus {
+ samsung,pins = "gpg3-1", "gpg3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c5_bus: hs-i2c5-bus {
+ samsung,pins = "gpg3-3", "gpg3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_nfc {
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c6_bus: hs-i2c6-bus {
+ samsung,pins = "gpj0-1", "gpj0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_touch {
+ gpj1: gpj1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c7_bus: hs-i2c7-bus {
+ samsung,pins = "gpj1-1", "gpj1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_ff {
+ gpg4: gpg4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi3_bus: spi3-bus {
+ samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_ese {
+ gpv7: gpv7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi4_bus: spi4-bus {
+ samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_fsys0 {
+ gpr4: gpr4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpr4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpr4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpr4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpr4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+};
+
+&pinctrl_fsys1 {
+ gpr0: gpr0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr1: gpr1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr2: gpr2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr3: gpr3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpr0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpr0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_ds: sd0-ds {
+ samsung,pins = "gpr0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_qrdy: sd0-qrdy {
+ samsung,pins = "gpr0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpr1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpr2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpr2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_ds: sd1-ds {
+ samsung,pins = "gpr2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <6>;
+ };
+
+ sd1_qrdy: sd1-qrdy {
+ samsung,pins = "gpr2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <6>;
+ };
+
+ sd1_int: sd1-int {
+ samsung,pins = "gpr2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <6>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpr3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <2>;
+ };
+};
--- /dev/null
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+ compatible = "samsung,exynos7";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_bus0;
+ pinctrl2 = &pinctrl_nfc;
+ pinctrl3 = &pinctrl_touch;
+ pinctrl4 = &pinctrl_ff;
+ pinctrl5 = &pinctrl_ese;
+ pinctrl6 = &pinctrl_fsys0;
+ pinctrl7 = &pinctrl_fsys1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x18000000>;
+
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ gic: interrupt-controller@11001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x11001000 0x1000>,
+ <0x11002000 0x1000>,
+ <0x11004000 0x2000>,
+ <0x11006000 0x2000>;
+ };
+
+ clock_topc: clock-controller@10570000 {
+ compatible = "samsung,exynos7-clock-topc";
+ reg = <0x10570000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ clock_top0: clock-controller@105d0000 {
+ compatible = "samsung,exynos7-clock-top0";
+ reg = <0x105d0000 0xb000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+ <&clock_topc DOUT_SCLK_BUS1_PLL>,
+ <&clock_topc DOUT_SCLK_CC_PLL>,
+ <&clock_topc DOUT_SCLK_MFC_PLL>;
+ clock-names = "fin_pll", "dout_sclk_bus0_pll",
+ "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+ "dout_sclk_mfc_pll";
+ };
+
+ clock_top1: clock-controller@105e0000 {
+ compatible = "samsung,exynos7-clock-top1";
+ reg = <0x105e0000 0xb000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+ <&clock_topc DOUT_SCLK_BUS1_PLL>,
+ <&clock_topc DOUT_SCLK_CC_PLL>,
+ <&clock_topc DOUT_SCLK_MFC_PLL>;
+ clock-names = "fin_pll", "dout_sclk_bus0_pll",
+ "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+ "dout_sclk_mfc_pll";
+ };
+
+ clock_ccore: clock-controller@105b0000 {
+ compatible = "samsung,exynos7-clock-ccore";
+ reg = <0x105b0000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
+ clock-names = "fin_pll", "dout_aclk_ccore_133";
+ };
+
+ clock_peric0: clock-controller@13610000 {
+ compatible = "samsung,exynos7-clock-peric0";
+ reg = <0x13610000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
+ <&clock_top0 CLK_SCLK_UART0>;
+ clock-names = "fin_pll", "dout_aclk_peric0_66",
+ "sclk_uart0";
+ };
+
+ clock_peric1: clock-controller@14c80000 {
+ compatible = "samsung,exynos7-clock-peric1";
+ reg = <0x14c80000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+ <&clock_top0 CLK_SCLK_UART1>,
+ <&clock_top0 CLK_SCLK_UART2>,
+ <&clock_top0 CLK_SCLK_UART3>;
+ clock-names = "fin_pll", "dout_aclk_peric1_66",
+ "sclk_uart1", "sclk_uart2", "sclk_uart3";
+ };
+
+ clock_peris: clock-controller@10040000 {
+ compatible = "samsung,exynos7-clock-peris";
+ reg = <0x10040000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
+ clock-names = "fin_pll", "dout_aclk_peris_66";
+ };
+
+ clock_fsys0: clock-controller@10e90000 {
+ compatible = "samsung,exynos7-clock-fsys0";
+ reg = <0x10e90000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
+ <&clock_top1 DOUT_SCLK_MMC2>;
+ clock-names = "fin_pll", "dout_aclk_fsys0_200",
+ "dout_sclk_mmc2";
+ };
+
+ clock_fsys1: clock-controller@156e0000 {
+ compatible = "samsung,exynos7-clock-fsys1";
+ reg = <0x156e0000 0xd00>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
+ <&clock_top1 DOUT_SCLK_MMC0>,
+ <&clock_top1 DOUT_SCLK_MMC1>;
+ clock-names = "fin_pll", "dout_aclk_fsys1_200",
+ "dout_sclk_mmc0", "dout_sclk_mmc1";
+ };
+
+ serial_0: serial@13630000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13630000 0x100>;
+ interrupts = <0 440 0>;
+ clocks = <&clock_peric0 PCLK_UART0>,
+ <&clock_peric0 SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_1: serial@14c20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c20000 0x100>;
+ interrupts = <0 456 0>;
+ clocks = <&clock_peric1 PCLK_UART1>,
+ <&clock_peric1 SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_2: serial@14c30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c30000 0x100>;
+ interrupts = <0 457 0>;
+ clocks = <&clock_peric1 PCLK_UART2>,
+ <&clock_peric1 SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_3: serial@14c40000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c40000 0x100>;
+ interrupts = <0 458 0>;
+ clocks = <&clock_peric1 PCLK_UART3>,
+ <&clock_peric1 SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ pinctrl_alive: pinctrl@10580000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x10580000 0x1000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 0>;
+ };
+ };
+
+ pinctrl_bus0: pinctrl@13470000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x13470000 0x1000>;
+ interrupts = <0 383 0>;
+ };
+
+ pinctrl_nfc: pinctrl@14cd0000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14cd0000 0x1000>;
+ interrupts = <0 473 0>;
+ };
+
+ pinctrl_touch: pinctrl@14ce0000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14ce0000 0x1000>;
+ interrupts = <0 474 0>;
+ };
+
+ pinctrl_ff: pinctrl@14c90000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14c90000 0x1000>;
+ interrupts = <0 475 0>;
+ };
+
+ pinctrl_ese: pinctrl@14ca0000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14ca0000 0x1000>;
+ interrupts = <0 476 0>;
+ };
+
+ pinctrl_fsys0: pinctrl@10e60000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x10e60000 0x1000>;
+ interrupts = <0 221 0>;
+ };
+
+ pinctrl_fsys1: pinctrl@15690000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x15690000 0x1000>;
+ interrupts = <0 203 0>;
+ };
+
+ hsi2c_0: hsi2c@13640000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13640000 0x1000>;
+ interrupts = <0 441 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c0_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C0>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_1: hsi2c@13650000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13650000 0x1000>;
+ interrupts = <0 442 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c1_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C1>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_2: hsi2c@14e60000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e60000 0x1000>;
+ interrupts = <0 459 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c2_bus>;
+ clocks = <&clock_peric1 PCLK_HSI2C2>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_3: hsi2c@14e70000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e70000 0x1000>;
+ interrupts = <0 460 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c3_bus>;
+ clocks = <&clock_peric1 PCLK_HSI2C3>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_4: hsi2c@13660000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13660000 0x1000>;
+ interrupts = <0 443 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c4_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C4>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_5: hsi2c@13670000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13670000 0x1000>;
+ interrupts = <0 444 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c5_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C5>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_6: hsi2c@14e00000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e00000 0x1000>;
+ interrupts = <0 461 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c6_bus>;
+ clocks = <&clock_peric1 PCLK_HSI2C6>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_7: hsi2c@13e10000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 462 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c7_bus>;
+ clocks = <&clock_peric1 PCLK_HSI2C7>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_8: hsi2c@14e20000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e20000 0x1000>;
+ interrupts = <0 463 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c8_bus>;
+ clocks = <&clock_peric1 PCLK_HSI2C8>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_9: hsi2c@13680000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13680000 0x1000>;
+ interrupts = <0 445 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c9_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C9>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_10: hsi2c@13690000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x13690000 0x1000>;
+ interrupts = <0 446 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c10_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C10>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_11: hsi2c@136a0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x136a0000 0x1000>;
+ interrupts = <0 447 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c11_bus>;
+ clocks = <&clock_peric0 PCLK_HSI2C11>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ };
+
+ pmu_system_controller: system-controller@105c0000 {
+ compatible = "samsung,exynos7-pmu", "syscon";
+ reg = <0x105c0000 0x5000>;
+ };
+
+ rtc: rtc@10590000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10590000 0x100>;
+ interrupts = <0 355 0>, <0 356 0>;
+ clocks = <&clock_ccore PCLK_RTC>;
+ clock-names = "rtc";
+ status = "disabled";
+ };
+
+ watchdog: watchdog@101d0000 {
+ compatible = "samsung,exynos7-wdt";
+ reg = <0x101d0000 0x100>;
+ interrupts = <0 110 0>;
+ clocks = <&clock_peris PCLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ mmc_0: mmc@15740000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <0 201 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15740000 0x2000>;
+ clocks = <&clock_fsys1 ACLK_MMC0>,
+ <&clock_top1 CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_1: mmc@15750000 {
+ compatible = "samsung,exynos7-dw-mshc";
+ interrupts = <0 202 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15750000 0x2000>;
+ clocks = <&clock_fsys1 ACLK_MMC1>,
+ <&clock_top1 CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_2: mmc@15560000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <0 216 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15560000 0x2000>;
+ clocks = <&clock_fsys0 ACLK_MMC2>,
+ <&clock_top1 CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ adc: adc@13620000 {
+ compatible = "samsung,exynos7-adc";
+ reg = <0x13620000 0x100>;
+ interrupts = <0 448 0>;
+ clocks = <&clock_peric0 PCLK_ADCIF>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
+ pwm: pwm@136c0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x136c0000 0x100>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ #pwm-cells = <3>;
+ clocks = <&clock_peric0 PCLK_PWM>;
+ clock-names = "timers";
+ };
+ };
+};
+
+#include "exynos7-pinctrl.dtsi"
--- /dev/null
+dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Device Tree file for Freescale LS2085a software Simulator model
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2085a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2085a software Simulator model";
+ compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
+ ethernet@2210000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x0 0x2210000 0x0 0x100>;
+ interrupts = <0 58 0x1>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree Include file for Freescale Layerscape-2085A family SoC.
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "fsl,ls2085a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /*
+ * We expect the enable-method for cpu's to be "psci", but this
+ * is dependent on the SoC FW, which will fill this in.
+ *
+ * Currently supported enable-method is psci v0.2
+ */
+
+ /* We have 4 clusters having 2 Cortex-A57 cores each */
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x1>;
+ };
+
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x100>;
+ };
+
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x101>;
+ };
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x200>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x201>;
+ };
+
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x300>;
+ };
+
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x301>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+ <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+ <1 11 0x8>, /* Virtual PPI, active-low */
+ <1 10 0x8>; /* Hypervisor PPI, active-low */
+ };
+
+ serial0: serial@21c0500 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clock-frequency = <0>; /* Updated by bootloader */
+ interrupts = <0 32 0x1>; /* edge triggered */
+ };
+
+ serial1: serial@21c0600 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clock-frequency = <0>; /* Updated by bootloader */
+ interrupts = <0 32 0x1>; /* edge triggered */
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ };
+};
--- /dev/null
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8173.dtsi"
+
+/ {
+ model = "mediatek,mt8173-evb";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ chosen { };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt8173";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ core1 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt8173-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10220000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10221000 0 0x1000>,
+ <0 0x10222000 0 0x2000>,
+ <0 0x10224000 0 0x2000>,
+ <0 0x10226000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8173-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8173-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8173-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt8173-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+ };
+
+};
+
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
projects / linux-2.6-microblaze.git / commitdiff