remoteproc: k3-m4: Introduce central function to put rproc into reset

Currently, the TI K3 M4 remoteproc driver assumes all of the M4 devices
have local resets. Even though its true for all existing M4 devices,
keep room for future devices which possibly may not have local resets
and only have a module reset.

Therefore introduce a central function, k3_m4_rproc_reset() which
handles both type of devices (with and without local resets), and use it
throughout the driver to put the remote processor into reset. This is
done to align the reset implementation with DSP remoteproc driver and
can be factored out later.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-17-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index 9dcae94..150c68e 100644 (file)
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -21,6 +21,26 @@
 #include "ti_sci_proc.h"
 #include "ti_k3_common.h"
 
+/* Put the M4 remote processor into reset */
+static int k3_m4_rproc_reset(struct k3_rproc *kproc)
+{
+       struct device *dev = kproc->dev;
+       int ret;
+
+       if (kproc->data->uses_lreset) {
+               ret = reset_control_assert(kproc->reset);
+               if (ret)
+                       dev_err(dev, "local-reset assert failed, ret = %d\n", ret);
+       } else {
+               ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
+                                                           kproc->ti_sci_id);
+               if (ret)
+                       dev_err(dev, "module-reset assert failed, ret = %d\n", ret);
+       }
+
+       return ret;
+}
+
 static int k3_m4_rproc_ping_mbox(struct k3_rproc *kproc)
 {
        struct device *dev = kproc->dev;
@@ -65,11 +85,9 @@ static int k3_m4_rproc_prepare(struct rproc *rproc)
         * Ensure the local reset is asserted so the core doesn't
         * execute bogus code when the module reset is released.
         */
-       ret = reset_control_assert(kproc->reset);
-       if (ret) {
-               dev_err(dev, "could not assert local reset\n");
+       ret = k3_m4_rproc_reset(kproc);
+       if (ret)
                return ret;
-       }
 
        ret = reset_control_status(kproc->reset);
        if (ret <= 0) {
@@ -374,16 +392,8 @@ static int k3_m4_rproc_start(struct rproc *rproc)
 static int k3_m4_rproc_stop(struct rproc *rproc)
 {
        struct k3_rproc *kproc = rproc->priv;
-       struct device *dev = kproc->dev;
-       int ret;
 
-       ret = reset_control_assert(kproc->reset);
-       if (ret) {
-               dev_err(dev, "local-reset assert failed, ret = %d\n", ret);
-               return ret;
-       }
-
-       return 0;
+       return k3_m4_rproc_reset(kproc);
 }
 
 /*