mdio-parent-bus = <&emdio1>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1_MDIO */
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
/* Child MDIO buses, one for each riser card:
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap =<&snvs>;
+ regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
pgc_vpumix: power-domain@19 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
- clocks =<&clk IMX8MP_CLK_VPU_ROOT>;
+ clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
};
pgc_vpu_g1: power-domain@20 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
- <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+ <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x6a>;
vdd-supply = <®_3v3_p>;
vddio-supply = <®_3v3_p>;
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
};
};
};
&accel_gyro {
- mount-matrix = "1", "0", "0",
- "0", "-1", "0",
- "0", "0", "1";
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
};
&bq25895 {
};
&accel_gyro {
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
};
&bq25895 {
};
&magnetometer {
- mount-matrix = "1", "0", "0",
- "0", "-1", "0",
- "0", "0", "-1";
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "-1";
};
&proximity {
snvs_rtc: snvs-rtc-lp{
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap =<&snvs>;
+ regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
- <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
+ <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
/* Colibri UART_A */
&lpuart3 {
- status= "okay";
+ status = "okay";
};
/* Colibri SDCard */
/* Colibri UART_A */
&lpuart3 {
- status= "okay";
+ status = "okay";
};
&lsio_gpio3 {
clock-names = "ipg", "ahb", "per";
bus-width = <8>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
};