kbuild: abort build on bad stack protector flag

Before, the stack protector flag was sanity checked before .config had
been reprocessed.  This meant the build couldn't be aborted early, and
only a warning could be emitted followed later by the compiler blowing
up with an unknown flag.  This has caused a lot of confusion over time,
so this splits the flag selection from sanity checking and performs the
sanity checking after the make has been restarted from a reprocessed
.config, so builds can be aborted as early as possible now.

Additionally moves the x86-specific sanity check to the same location,
since it suffered from the same warn-then-wait-for-compiler-failure
problem.

Link: http://lkml.kernel.org/r/20160712223043.GA11664@www.outflux.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Makefile b/Makefile
index e1a5605..ce8ef5d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -647,41 +647,28 @@ ifneq ($(CONFIG_FRAME_WARN),0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 
-# Handle stack protector mode.
-#
-# Since kbuild can potentially perform two passes (first with the old
-# .config values and then with updated .config values), we cannot error out
-# if a desired compiler option is unsupported. If we were to error, kbuild
-# could never get to the second pass and actually notice that we changed
-# the option to something that was supported.
-#
-# Additionally, we don't want to fallback and/or silently change which compiler
-# flags will be used, since that leads to producing kernels with different
-# security feature characteristics depending on the compiler used. ("But I
-# selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
-#
-# The middle ground is to warn here so that the failed option is obvious, but
-# to let the build fail with bad compiler flags so that we can't produce a
-# kernel when there is a CONFIG and compiler mismatch.
-#
+# This selects the stack protector compiler flag. Testing it is delayed
+# until after .config has been reprocessed, in the prepare-compiler-check
+# target.
 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
   stackp-flag := -fstack-protector
-  ifeq ($(call cc-option, $(stackp-flag)),)
-    $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
-             -fstack-protector not supported by compiler)
-  endif
+  stackp-name := REGULAR
 else
 ifdef CONFIG_CC_STACKPROTECTOR_STRONG
   stackp-flag := -fstack-protector-strong
-  ifeq ($(call cc-option, $(stackp-flag)),)
-    $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
-             -fstack-protector-strong not supported by compiler)
-  endif
+  stackp-name := STRONG
 else
   # Force off for distro compilers that enable stack protector by default.
   stackp-flag := $(call cc-option, -fno-stack-protector)
 endif
 endif
+# Find arch-specific stack protector compiler sanity-checking script.
+ifdef CONFIG_CC_STACKPROTECTOR
+  stackp-path := $(srctree)/scripts/gcc-$(ARCH)_$(BITS)-has-stack-protector.sh
+  ifneq ($(wildcard $(stackp-path)),)
+    stackp-check := $(stackp-path)
+  endif
+endif
 KBUILD_CFLAGS += $(stackp-flag)
 
 ifdef CONFIG_KCOV
@@ -1017,8 +1004,10 @@ ifneq ($(KBUILD_SRC),)
        fi;
 endif
 
-# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile asm-generic
+# prepare2 creates a makefile if using a separate output directory.
+# From this point forward, .config has been reprocessed, so any rules
+# that need to depend on updated CONFIG_* values can be checked here.
+prepare2: prepare3 prepare-compiler-check outputmakefile asm-generic
 
 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
                    include/config/auto.conf
@@ -1049,6 +1038,32 @@ endif
 PHONY += prepare-objtool
 prepare-objtool: $(objtool_target)
 
+# Check for CONFIG flags that require compiler support. Abort the build
+# after .config has been processed, but before the kernel build starts.
+#
+# For security-sensitive CONFIG options, we don't want to fallback and/or
+# silently change which compiler flags will be used, since that leads to
+# producing kernels with different security feature characteristics
+# depending on the compiler used. (For example, "But I selected
+# CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
+PHONY += prepare-compiler-check
+prepare-compiler-check: FORCE
+# Make sure compiler supports requested stack protector flag.
+ifdef stackp-name
+  ifeq ($(call cc-option, $(stackp-flag)),)
+       @echo Cannot use CONFIG_CC_STACKPROTECTOR_$(stackp-name): \
+                 $(stackp-flag) not supported by compiler >&2 && exit 1
+  endif
+endif
+# Make sure compiler does not have buggy stack-protector support.
+ifdef stackp-check
+  ifneq ($(shell $(CONFIG_SHELL) $(stackp-check) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
+       @echo Cannot use CONFIG_CC_STACKPROTECTOR_$(stackp-name): \
+                  $(stackp-flag) available but compiler is broken >&2 && exit 1
+  endif
+endif
+       @:
+
 # Generate some files
 # ---------------------------------------------------------------------------
 

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 6fce7f0..830ed39 100644 (file)
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -126,14 +126,6 @@ else
         KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args)
 endif
 
-# Make sure compiler does not have buggy stack-protector support.
-ifdef CONFIG_CC_STACKPROTECTOR
-       cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
-        ifneq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
-                $(warning stack-protector enabled but compiler support broken)
-        endif
-endif
-
 ifdef CONFIG_X86_X32
        x32_ld_ok := $(call try-run,\
                        /bin/echo -e '1: .quad 1b' | \