arm64: dts: marvell: Add I2C definitions for the Armada 3700

The Armada 3700 has two i2c bus interface units, this commit adds the
definitions of the corresponding device nodes. It also enables the node
on the development board for this SoC.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 0c236d8..935d37f 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -62,6 +62,10 @@
        };
 };
 
+&i2c0 {
+       status = "okay";
+};
+
 /* CON3 */
 &sata {
        status = "okay";

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 248bd07..926a402 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -109,6 +109,24 @@
                                status = "disabled";
                        };
 
+                       i2c0: i2c@11000 {
+                               compatible = "marvell,armada-3700-i2c";
+                               reg = <0x11000 0x24>;
+                               clocks = <&nb_periph_clk 10>;
+                               interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@11080 {
+                               compatible = "marvell,armada-3700-i2c";
+                               reg = <0x11080 0x24>;
+                               clocks = <&nb_periph_clk 9>;
+                               interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
                        uart0: serial@12000 {
                                compatible = "marvell,armada-3700-uart";
                                reg = <0x12000 0x400>;