dt-bindings: interrupt-controller: Convert st,spear3xx-shirq to DT schema

Convert the SPEAr3xx Shared interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.

Link: https://lore.kernel.org/r/20250505144851.1293180-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
new file mode 100644 (file)
index 0000000..27d3617
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,spear300-shirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPEAr3xx Shared IRQ controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+
+description: |
+  SPEAr3xx architecture includes shared/multiplexed irqs for certain set of
+  devices. The multiplexor provides a single interrupt to parent interrupt
+  controller (VIC) on behalf of a group of devices.
+
+  There can be multiple groups available on SPEAr3xx variants but not exceeding
+  4. The number of devices in a group can differ, further they may share same
+  set of status/mask registers spanning across different bit masks. Also in some
+  cases the group may not have enable or other registers. This makes software
+  little complex.
+
+  A single node in the device tree is used to describe the shared interrupt
+  multiplexer (one node for all groups). A group in the interrupt controller
+  shares config/control registers with other groups. For example, a 32-bit
+  interrupt enable/disable config register can accommodate up to 4 interrupt
+  groups.
+
+properties:
+  compatible:
+    enum:
+      - st,spear300-shirq
+      - st,spear310-shirq
+      - st,spear320-shirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    description: Interrupt specifier array for SHIRQ groups
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@b3000000 {
+        compatible = "st,spear320-shirq";
+        reg = <0xb3000000 0x1000>;
+        interrupts = <28 29 30 1>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+    };

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
deleted file mode 100644 (file)
index a407c49..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* SPEAr Shared IRQ layer (shirq)
-
-SPEAr3xx architecture includes shared/multiplexed irqs for certain set
-of devices. The multiplexor provides a single interrupt to parent
-interrupt controller (VIC) on behalf of a group of devices.
-
-There can be multiple groups available on SPEAr3xx variants but not
-exceeding 4. The number of devices in a group can differ, further they
-may share same set of status/mask registers spanning across different
-bit masks. Also in some cases the group may not have enable or other
-registers. This makes software little complex.
-
-A single node in the device tree is used to describe the shared
-interrupt multiplexor (one node for all groups). A group in the
-interrupt controller shares config/control registers with other groups.
-For example, a 32-bit interrupt enable/disable config register can
-accommodate up to 4 interrupt groups.
-
-Required properties:
-  - compatible: should be, either of
-     - "st,spear300-shirq"
-     - "st,spear310-shirq"
-     - "st,spear320-shirq"
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: should be <1> which basically contains the offset
-    (starting from 0) of interrupts for all the groups.
-  - reg: Base address and size of shirq registers.
-  - interrupts: The list of interrupts generated by the groups which are
-    then connected to a parent interrupt controller. Each group is
-    associated with one of the interrupts, hence number of interrupts (to
-    parent) is equal to number of groups. The format of the interrupt
-    specifier depends in the interrupt parent controller.
-
-Example:
-
-The following is an example from the SPEAr320 SoC dtsi file.
-
-shirq: interrupt-controller@b3000000 {
-       compatible = "st,spear320-shirq";
-       reg = <0xb3000000 0x1000>;
-       interrupts = <28 29 30 1>;
-       #interrupt-cells = <1>;
-       interrupt-controller;
-};