``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
control its functionality at the system level. They are located in the
-``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
-CPUs.
+``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs.
Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
argument is passed to the kernel in the command line.
but it affects the maximum possible value of per-policy P-state limits
(see `Interpretation of Policy Attributes`_ below for details).
+``hwp_dynamic_boost``
+ This attribute is only present if ``intel_pstate`` works in the
+ `active mode with the HWP feature enabled <Active Mode With HWP_>`_ in
+ the processor. If set (equal to 1), it causes the minimum P-state limit
+ to be increased dynamically for a short time whenever a task previously
+ waiting on I/O is selected to run on a given logical CPU (the purpose
+ of this mechanism is to improve performance).
+
+ This setting has no effect on logical CPUs whose minimum P-state limit
+ is directly set to the highest non-turbo P-state or above it.
+
.. _status_attr:
``status``
--- /dev/null
+Spreadtrum SC27xx PMIC Vibrator
+
+Required properties:
+- compatible: should be "sprd,sc2731-vibrator".
+- reg: address of vibrator control register.
+
+Example :
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vibrator@eb4 {
+ compatible = "sprd,sc2731-vibrator";
+ reg = <0xeb4>;
+ };
+ };
int (*iterate) (struct file *, struct dir_context *);
int (*iterate_shared) (struct file *, struct dir_context *);
__poll_t (*poll) (struct file *, struct poll_table_struct *);
- struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
- __poll_t (*poll_mask) (struct file *, __poll_t);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
};
locking rules:
- All except for ->poll_mask may block.
+ All may block.
->llseek() locking has moved from llseek to the individual llseek
implementations. If your fs is not using generic_file_llseek, you
the lease within the individual filesystem to record the result of the
operation
-->poll_mask can be called with or without the waitqueue lock for the waitqueue
-returned from ->get_poll_head.
-
--------------------------- dquot_operations -------------------------------
prototypes:
int (*write_dquot) (struct dquot *);
ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
int (*iterate) (struct file *, struct dir_context *);
__poll_t (*poll) (struct file *, struct poll_table_struct *);
- struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
- __poll_t (*poll_mask) (struct file *, __poll_t);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
activity on this file and (optionally) go to sleep until there
is activity. Called by the select(2) and poll(2) system calls
- get_poll_head: Returns the struct wait_queue_head that callers can
- wait on. Callers need to check the returned events using ->poll_mask
- once woken. Can return NULL to indicate polling is not supported,
- or any error code using the ERR_PTR convention to indicate that a
- grave error occured and ->poll_mask shall not be called.
-
- poll_mask: return the mask of EPOLL* values describing the file descriptor
- state. Called either before going to sleep on the waitqueue returned by
- get_poll_head, or after it has been woken. If ->get_poll_head and
- ->poll_mask are implemented ->poll does not need to be implement.
-
unlocked_ioctl: called by the ioctl(2) system call.
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
to use it. It should be placed at the top of the configuration, before any
other statement.
+'#' Kconfig source file comment:
+
+An unquoted '#' character anywhere in a source file line indicates
+the beginning of a source file comment. The remainder of that line
+is a comment.
+
Kconfig hints
-------------
+==============================================================
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
Additional Configurations
=========================
- Configuring the Driver on Different Distributions
- -------------------------------------------------
+Configuring the Driver on Different Distributions
+-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modprobe.d/*.conf as well as editing other system
- startup scripts and/or configuration files. Many popular Linux
- distributions ship with tools to make these changes for you. To learn the
- proper way to configure a network device for your system, refer to your
- distribution documentation. If during this process you are asked for the
- driver or module name, the name for the Linux Base Driver for the Intel
- PRO/100 Family of Adapters is e100.
+Configuring a network driver to load properly when the system is started
+is distribution dependent. Typically, the configuration process involves
+adding an alias line to /etc/modprobe.d/*.conf as well as editing other
+system startup scripts and/or configuration files. Many popular Linux
+distributions ship with tools to make these changes for you. To learn
+the proper way to configure a network device for your system, refer to
+your distribution documentation. If during this process you are asked
+for the driver or module name, the name for the Linux Base Driver for
+the Intel PRO/100 Family of Adapters is e100.
- As an example, if you install the e100 driver for two PRO/100 adapters
- (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
+As an example, if you install the e100 driver for two PRO/100 adapters
+(eth0 and eth1), add the following to a configuration file in
+/etc/modprobe.d/::
alias eth0 e100
alias eth1 e100
- Viewing Link Messages
- ---------------------
- In order to see link messages and other Intel driver information on your
- console, you must set the dmesg level up to six. This can be done by
- entering the following on the command line before loading the e100 driver::
-
- dmesg -n 6
+Viewing Link Messages
+---------------------
- If you wish to see all messages issued by the driver, including debug
- messages, set the dmesg level to eight.
+In order to see link messages and other Intel driver information on your
+console, you must set the dmesg level up to six. This can be done by
+entering the following on the command line before loading the e100
+driver::
- NOTE: This setting is not saved across reboots.
+ dmesg -n 6
+If you wish to see all messages issued by the driver, including debug
+messages, set the dmesg level to eight.
- ethtool
- -------
+NOTE: This setting is not saved across reboots.
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 1.6 or later is required for this functionality.
+ethtool
+-------
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The ethtool
+version 1.6 or later is required for this functionality.
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is provided through the ethtool* utility. For instructions on enabling
- WoL with ethtool, refer to the ethtool man page.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
- WoL will be enabled on the system during the next shut down or reboot. For
- this driver version, in order to enable WoL, the e100 driver must be
- loaded when shutting down or rebooting the system.
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is provided through the ethtool* utility. For instructions on
+enabling WoL with ethtool, refer to the ethtool man page. WoL will be
+enabled on the system during the next shut down or reboot. For this
+driver version, in order to enable WoL, the e100 driver must be loaded
+when shutting down or rebooting the system.
- NAPI
- ----
+NAPI
+----
- NAPI (Rx polling mode) is supported in the e100 driver.
+NAPI (Rx polling mode) is supported in the e100 driver.
- See https://wiki.linuxfoundation.org/networking/napi for more information
- on NAPI.
+See https://wiki.linuxfoundation.org/networking/napi for more
+information on NAPI.
- Multiple Interfaces on Same Ethernet Broadcast Network
- ------------------------------------------------------
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
- Due to the default ARP behavior on Linux, it is not possible to have
- one system on two IP networks in the same Ethernet broadcast domain
- (non-partitioned switch) behave as expected. All Ethernet interfaces
- will respond to IP traffic for any IP address assigned to the system.
- This results in unbalanced receive traffic.
+Due to the default ARP behavior on Linux, it is not possible to have one
+system on two IP networks in the same Ethernet broadcast domain
+(non-partitioned switch) behave as expected. All Ethernet interfaces
+will respond to IP traffic for any IP address assigned to the system.
+This results in unbalanced receive traffic.
- If you have multiple interfaces in a server, either turn on ARP
- filtering by
+If you have multiple interfaces in a server, either turn on ARP
+filtering by
- (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
- (this only works if your kernel's version is higher than 2.4.5), or
+(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5), or
- (2) installing the interfaces in separate broadcast domains (either
- in different switches or in a switch partitioned to VLANs).
+(2) installing the interfaces in separate broadcast domains (either
+ in different switches or in a switch partitioned to VLANs).
Support
+===========================================================
Linux* Base Driver for Intel(R) Ethernet Network Connection
===========================================================
Additional Configurations
=========================
- Jumbo Frames
- ------------
- Jumbo Frames support is enabled by changing the MTU to a value larger than
- the default of 1500. Use the ifconfig command to increase the MTU size.
- For example::
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the MTU to a value larger
+than the default of 1500. Use the ifconfig command to increase the MTU
+size. For example::
ifconfig eth<x> mtu 9000 up
- This setting is not saved across reboots. It can be made permanent if
- you add::
+This setting is not saved across reboots. It can be made permanent if
+you add::
MTU=9000
- to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
- applies to the Red Hat distributions; other distributions may store this
- setting in a different location.
+to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
+applies to the Red Hat distributions; other distributions may store this
+setting in a different location.
+
+Notes: Degradation in throughput performance may be observed in some
+Jumbo frames environments. If this is observed, increasing the
+application's socket buffer size and/or increasing the
+/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
+application manual and /usr/src/linux*/Documentation/
+networking/ip-sysctl.txt for more details.
- Notes:
- Degradation in throughput performance may be observed in some Jumbo frames
- environments. If this is observed, increasing the application's socket buffer
- size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
- See the specific application manual and /usr/src/linux*/Documentation/
- networking/ip-sysctl.txt for more details.
+- The maximum MTU setting for Jumbo Frames is 16110. This value
+ coincides with the maximum Jumbo Frames size of 16128.
- - The maximum MTU setting for Jumbo Frames is 16110. This value coincides
- with the maximum Jumbo Frames size of 16128.
+- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
+ in poor performance or loss of link.
- - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
- poor performance or loss of link.
+- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
+ support Jumbo Frames. These correspond to the following product names:
+ Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
+ Connection
- - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
- support Jumbo Frames. These correspond to the following product names:
- Intel(R) PRO/1000 Gigabit Server Adapter
- Intel(R) PRO/1000 PM Network Connection
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The ethtool
+version 1.6 or later is required for this functionality.
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 1.6 or later is required for this functionality.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is configured through the ethtool* utility.
+WoL will be enabled on the system during the next shut down or reboot.
+For this driver version, in order to enable WoL, the e1000 driver must be
+loaded when shutting down or rebooting the system.
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the e1000 driver must be
- loaded when shutting down or rebooting the system.
Support
=======
Temporarily pause a stream parser. Message parsing is suspended
and no new messages are delivered to the upper layer.
-void strp_pause(struct strparser *strp)
+void strp_unpause(struct strparser *strp)
Unpause a paused stream parser.
N: bcm586*
N: bcm88312
N: hr2
-F: arch/arm64/boot/dts/broadcom/ns2*
+N: stingray
+F: arch/arm64/boot/dts/broadcom/northstar2/*
+F: arch/arm64/boot/dts/broadcom/stingray/*
F: drivers/clk/bcm/clk-ns*
+F: drivers/clk/bcm/clk-sr*
F: drivers/pinctrl/bcm/pinctrl-ns*
+F: include/dt-bindings/clock/bcm-sr*
BROADCOM KONA GPIO DRIVER
M: Ray Jui <rjui@broadcom.com>
F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt
FREESCALE DIU FRAMEBUFFER DRIVER
-M: Timur Tabi <timur@tabi.org>
+M: Timur Tabi <timur@kernel.org>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/fsl-diu-fb.*
F: drivers/net/wan/fsl_ucc_hdlc*
FREESCALE QUICC ENGINE UCC UART DRIVER
-M: Timur Tabi <timur@tabi.org>
+M: Timur Tabi <timur@kernel.org>
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/tty/serial/ucc_uart.c
F: include/linux/fs_enet_pd.h
FREESCALE SOC SOUND DRIVERS
-M: Timur Tabi <timur@tabi.org>
+M: Timur Tabi <timur@kernel.org>
M: Nicolin Chen <nicoleotsuka@gmail.com>
M: Xiubo Li <Xiubo.Lee@gmail.com>
R: Fabio Estevam <fabio.estevam@nxp.com>
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
M: Florian Fainelli <f.fainelli@gmail.com>
S: Maintained
+F: Documentation/devicetree/bindings/net/dsa/
F: net/dsa/
F: include/net/dsa.h
F: include/linux/dsa/
S: Obsolete
F: drivers/net/wireless/intersil/prism54/
+PROC FILESYSTEM
+R: Alexey Dobriyan <adobriyan@gmail.com>
+L: linux-kernel@vger.kernel.org
+L: linux-fsdevel@vger.kernel.org
+S: Maintained
+F: fs/proc/
+F: include/linux/proc_fs.h
+F: tools/testing/selftests/proc/
+
PROC SYSCTL
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
M: Kees Cook <keescook@chromium.org>
F: drivers/cpufreq/qcom-cpufreq-kryo.c
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
-M: Timur Tabi <timur@codeaurora.org>
+M: Timur Tabi <timur@kernel.org>
L: netdev@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/net/ethernet/qualcomm/emac/
QUALCOMM HEXAGON ARCHITECTURE
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
- bool
+ bool "Support for multiple PCI domains"
depends on PCI
+ help
+ Enable PCI domains kernel management. Say Y if your machine
+ has a PCI bus hierarchy that requires more than one PCI
+ domain (aka segment) to be correctly managed. Say N otherwise.
+
+ If you don't know what to do here, say N.
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
3700 5
3900 6
4000 7>;
- cooling-cells = <2>;
+ #cooling-cells = <2>;
};
gpio-leds {
reg = <0x18008000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
reg = <0x1800b000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <0>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
- <GIC_SPI 97 IRQ_TYPE_NONE>,
- <GIC_SPI 98 IRQ_TYPE_NONE>,
- <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
};
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <1>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
- <GIC_SPI 103 IRQ_TYPE_NONE>,
- <GIC_SPI 104 IRQ_TYPE_NONE>,
- <GIC_SPI 105 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
};
reg = <0x38000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
};
reg = <0x3b000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
};
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <0>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
- <GIC_SPI 183 IRQ_TYPE_NONE>,
- <GIC_SPI 184 IRQ_TYPE_NONE>,
- <GIC_SPI 185 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
brcm,pcie-msi-inten;
};
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <1>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
- <GIC_SPI 189 IRQ_TYPE_NONE>,
- <GIC_SPI 190 IRQ_TYPE_NONE>,
- <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
brcm,pcie-msi-inten;
};
};
reg = <0x38000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
dma-coherent;
status = "disabled";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <0>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
- <GIC_SPI 128 IRQ_TYPE_NONE>,
- <GIC_SPI 129 IRQ_TYPE_NONE>,
- <GIC_SPI 130 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
brcm,pcie-msi-inten;
};
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <1>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
- <GIC_SPI 134 IRQ_TYPE_NONE>,
- <GIC_SPI 135 IRQ_TYPE_NONE>,
- <GIC_SPI 136 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
brcm,pcie-msi-inten;
};
};
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <2>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
- <GIC_SPI 140 IRQ_TYPE_NONE>,
- <GIC_SPI 141 IRQ_TYPE_NONE>,
- <GIC_SPI 142 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
brcm,pcie-msi-inten;
};
};
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
reg = <0x226000 0x1000>;
- interrupts = <42 IRQ_TYPE_EDGE_BOTH
- 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
- 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
- 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
- 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <42 43 44 45 46 47 48 49 50>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
status = "disabled";
clocks = <&clks IMX6Q_CLK_ECSPI5>,
<&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
- dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+ dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
nand0: nand@ff900000 {
#address-cells = <0x1>;
#size-cells = <0x1>;
- compatible = "denali,denali-nand-dt";
+ compatible = "altr,socfpga-denali-nand";
reg = <0xff900000 0x100000>,
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0x0 0x90 0x4>;
dma-mask = <0xffffffff>;
- clocks = <&nand_clk>;
+ clocks = <&nand_x_clk>;
status = "disabled";
};
#size-cells = <0>;
reg = <0xffda5000 0x100>;
interrupts = <0 102 4>;
- num-chipselect = <4>;
- bus-num = <0>;
+ num-cs = <4>;
/*32bit_access;*/
tx-dma-channel = <&pdma 16>;
rx-dma-channel = <&pdma 17>;
nand: nand@ffb90000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
+ compatible = "altr,socfpga-denali-nand";
reg = <0xffb90000 0x72000>,
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
-obj-$(CONFIG_SMP) += secure_cntvoff.o
+obj-$(CONFIG_CPU_V7) += secure_cntvoff.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CGROUPS=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
-CONFIG_ARCH_MULTI_V7=y
-# CONFIG_ARCH_MULTI_V5 is not set
-# CONFIG_ARCH_MULTI_V4 is not set
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_ARTPEC=y
CONFIG_MACH_ARTPEC6=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370=y
-CONFIG_MACH_ARMADA_375=y
-CONFIG_MACH_ARMADA_38X=y
-CONFIG_MACH_ARMADA_39X=y
-CONFIG_MACH_ARMADA_XP=y
-CONFIG_MACH_DOVE=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_ARCH_BCM_CYGNUS=y
CONFIG_ARCH_BCM_HR2=y
CONFIG_ARCH_BCM_NSP=y
-CONFIG_ARCH_BCM_21664=y
-CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_5301X=y
+CONFIG_ARCH_BCM_281XX=y
+CONFIG_ARCH_BCM_21664=y
CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_63XX=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
-CONFIG_ARCH_HIX5HD2=y
CONFIG_ARCH_HIP01=y
CONFIG_ARCH_HIP04=y
-CONFIG_ARCH_KEYSTONE=y
-CONFIG_ARCH_MESON=y
+CONFIG_ARCH_HIX5HD2=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX6SX=y
CONFIG_SOC_IMX6UL=y
CONFIG_SOC_IMX7D=y
-CONFIG_SOC_VF610=y
CONFIG_SOC_LS1021A=y
+CONFIG_SOC_VF610=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
+CONFIG_MACH_ARMADA_39X=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_MACH_DOVE=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
+CONFIG_ARCH_SIRF=y
CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SOCFPGA=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR13XX=y
-CONFIG_MACH_SPEAR1310=y
-CONFIG_MACH_SPEAR1340=y
-CONFIG_ARCH_STI=y
-CONFIG_ARCH_STM32=y
-CONFIG_ARCH_EXYNOS=y
-CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_U8500=y
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VEXPRESS_TC2_PM=y
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_PCI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_DRA7XX=y
-CONFIG_PCI_DRA7XX_EP=y
-CONFIG_PCI_KEYSTONE=y
-CONFIG_PCI_MSI=y
+CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
-CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-CONFIG_HIGHPTE=y
-CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPUFREQ_DT=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
-CONFIG_NEON=y
-CONFIG_KERNEL_MODE_NEON=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
+CONFIG_KERNEL_MODE_NEON=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_NET_DSA=m
-CONFIG_NET_SWITCHDEV=y
CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_DEV=y
CONFIG_CAN_AT91=m
CONFIG_CAN_FLEXCAN=m
-CONFIG_CAN_RCAR=m
+CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
+CONFIG_CAN_RCAR=m
CONFIG_CAN_MCP251X=y
-CONFIG_NET_DSA_BCM_SF2=m
-CONFIG_B53=m
-CONFIG_B53_SPI_DRIVER=m
-CONFIG_B53_MDIO_DRIVER=m
-CONFIG_B53_MMAP_DRIVER=m
-CONFIG_B53_SRAB_DRIVER=m
-CONFIG_CAN_SUN4I=y
CONFIG_BT=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCM=y
CONFIG_RFKILL_GPIO=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
CONFIG_SIMPLE_PM_BUS=y
-CONFIG_SUNXI_RSB=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y
-CONFIG_HIX5HD2_GMAC=y
+CONFIG_B53_SPI_DRIVER=m
+CONFIG_B53_MDIO_DRIVER=m
+CONFIG_B53_MMAP_DRIVER=m
+CONFIG_B53_SRAB_DRIVER=m
+CONFIG_NET_DSA_BCM_SF2=m
CONFIG_SUN4I_EMAC=y
-CONFIG_MACB=y
CONFIG_BCMGENET=m
CONFIG_BGMAC_BCMA=y
CONFIG_SYSTEMPORT=m
+CONFIG_MACB=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_GIANFAR=y
+CONFIG_HIX5HD2_GMAC=y
+CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
CONFIG_SH_ETH=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
+CONFIG_MARVELL_PHY=y
CONFIG_MICREL_PHY=y
-CONFIG_FIXED_PHY=y
+CONFIG_REALTEK_PHY=y
CONFIG_ROCKCHIP_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_BRCMFMAC=m
-CONFIG_RT2X00=m
-CONFIG_RT2800USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT2800USB=m
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
-CONFIG_KEYBOARD_SPEAR=y
+CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_ST_KEYSCAN=y
+CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_CROS_EC=m
-CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_TTYAT=y
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_DEV_BUS=y
-CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ST=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DAVINCI=y
-CONFIG_I2C_MESON=y
-CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_AT91=m
CONFIG_I2C_BCM2835=y
CONFIG_I2C_CADENCE=y
+CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
-CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_SPMI=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
-CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
-CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_POWER_RESET_AS3722=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_ST=y
+CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_POWER_RESET_RMOBILE=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_SBS=y
+CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_CPCAP=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_TPS65090=y
-CONFIG_AXP20X_POWER=m
-CONFIG_POWER_RESET_AS3722=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_POWER_RESET_RMOBILE=y
-CONFIG_POWER_RESET_ST=y
-CONFIG_POWER_AVS=y
-CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
CONFIG_CPU_THERMAL=y
-CONFIG_BCM2835_THERMAL=m
-CONFIG_BRCMSTB_THERMAL=m
CONFIG_IMX_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
-CONFIG_DAVINCI_WATCHDOG=m
-CONFIG_EXYNOS_THERMAL=m
+CONFIG_BCM2835_THERMAL=m
+CONFIG_BRCMSTB_THERMAL=m
CONFIG_ST_THERMAL_MEMMAP=y
CONFIG_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_DAVINCI_WATCHDOG=m
CONFIG_ORION_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
-CONFIG_ST_LPC_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_IMX2_WDT=y
+CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=m
CONFIG_MESON_WATCHDOG=y
-CONFIG_DW_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_RENESAS_WDT=m
-CONFIG_BCM2835_WDT=y
CONFIG_BCM47XX_WDT=y
-CONFIG_BCM7038_WDT=m
+CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
+CONFIG_BCM7038_WDT=m
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AC100=y
-CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
-CONFIG_MFD_RK808=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
-CONFIG_REGULATOR_ACT8945A=y
-CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_GPIO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_GSPCA=y
+CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_VIDEO_RCAR_VIN=m
-CONFIG_VIDEO_ATMEL_ISI=m
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_ATMEL_ISI=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_V4L_TEST_DRIVERS=y
+CONFIG_VIDEO_VIVID=m
CONFIG_CEC_PLATFORM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_DRM=y
-CONFIG_DRM_I2C_ADV7511=m
-CONFIG_DRM_I2C_ADV7511_AUDIO=y
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
-CONFIG_DRM_DUMB_VGA_DAC=m
-CONFIG_DRM_NXP_PTN3460=m
-CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_SUN4I=m
CONFIG_DRM_FSL_DCU=m
CONFIG_DRM_TEGRA=y
+CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_NXP_PTN3460=m
+CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_SII9234=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_STI=m
-CONFIG_DRM_VC4=y
+CONFIG_DRM_VC4=m
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_MXSFB=m
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SIMPLE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_SOC_ODROID=m
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SIMPLE_SCU_CARD=m
+CONFIG_SND_SOC_STI=m
CONFIG_SND_SUN4I_CODEC=m
CONFIG_SND_SOC_TEGRA=m
CONFIG_SND_SOC_TEGRA20_I2S=m
CONFIG_SND_SOC_TEGRA_WM9712=m
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
-CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_WM8978=m
-CONFIG_SND_SOC_STI=m
CONFIG_SND_SOC_STI_SAS=m
-CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SIMPLE_SCU_CARD=m
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_RCAR=m
CONFIG_USB_XHCI_TEGRA=m
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=m
-CONFIG_USB_EHCI_EXYNOS=y
-CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_ISP1760=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_TUSB_OMAP_DMA=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
-CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
CONFIG_AB8500_USB=y
-CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
CONFIG_TWL6030_USB=m
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
-CONFIG_USB_MSM_OTG=m
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_SPEAR=y
-CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_BCM_KONA=y
+CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SDHCI_MSM=y
-CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
-CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_PALMAS=y
-CONFIG_RTC_DRV_ST_LPC=y
CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_EM3027=y
+CONFIG_RTC_DRV_S5M=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_EFI=m
CONFIG_RTC_DRV_DIGICOLOR=m
-CONFIG_RTC_DRV_S5M=m
CONFIG_RTC_DRV_S3C=m
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
CONFIG_RTC_DRV_VT8500=y
-CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_ST_LPC=y
CONFIG_RTC_DRV_CPCAP=m
CONFIG_DMADEVICES=y
-CONFIG_DW_DMAC=y
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_SUN6I=y
CONFIG_FSL_EDMA=y
+CONFIG_IMX_DMA=y
+CONFIG_IMX_SDMA=y
CONFIG_MV_XOR=y
+CONFIG_MXS_DMA=y
+CONFIG_PL330_DMA=y
+CONFIG_SIRF_DMA=y
+CONFIG_STE_DMA40=y
+CONFIG_ST_FDMA=m
CONFIG_TEGRA20_APB_DMA=y
+CONFIG_XILINX_DMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_DW_DMAC=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=m
-CONFIG_STE_DMA40=y
-CONFIG_SIRF_DMA=y
-CONFIG_TI_EDMA=y
-CONFIG_PL330_DMA=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_DMA=y
-CONFIG_MXS_DMA=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_OMAP=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_XILINX_DMA=y
-CONFIG_DMA_SUN6I=y
-CONFIG_ST_FDMA=m
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
CONFIG_STAGING=y
-CONFIG_SENSORS_ISL29018=y
-CONFIG_SENSORS_ISL29028=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
-CONFIG_BCMA=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_PM=y
-CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD_RPM=y
-CONFIG_QCOM_SMP2P=y
-CONFIG_QCOM_SMSM=y
-CONFIG_QCOM_WCNSS_CTRL=m
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_QCOM_CLK_RPM=y
-CONFIG_CHROME_PLATFORMS=y
CONFIG_STAGING_BOARD=y
-CONFIG_CROS_EC_CHARDEV=m
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_RPM=y
CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
-CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_BCM2835_MBOX=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_REMOTEPROC=m
CONFIG_ST_REMOTEPROC=m
CONFIG_RPMSG_VIRTIO=m
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_GSBI=y
+CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMD_RPM=m
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_PM_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=m
-CONFIG_MEMORY=y
-CONFIG_EXTCON=y
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_XILINX_XADC=y
CONFIG_MPU3050_I2C=y
CONFIG_CM36651=m
+CONFIG_SENSORS_ISL29018=y
+CONFIG_SENSORS_ISL29028=y
CONFIG_AK8975=y
-CONFIG_RASPBERRYPI_POWER=y
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_ATMEL_TCB=m
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_BRCMSTB=m
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_MESON=m
CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
+CONFIG_PWM_STI=y
CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_HIX5HD2_SATA=y
-CONFIG_E1000E=y
-CONFIG_PWM_STI=y
-CONFIG_PWM_BCM2835=y
-CONFIG_PWM_BRCMSTB=m
-CONFIG_PHY_DM816X_USB=m
-CONFIG_OMAP_USB2=y
-CONFIG_TI_PIPE3=y
-CONFIG_TWL4030_USB=m
+CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_CPCAP_USB=m
-CONFIG_PHY_BERLIN_SATA=y
+CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_RCAR_GEN2=m
CONFIG_PHY_ROCKCHIP_DP=m
CONFIG_PHY_ROCKCHIP_USB=y
-CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_MIPHY28LP=y
-CONFIG_PHY_RCAR_GEN2=m
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_PHY_BRCM_SATA=y
-CONFIG_NVMEM=y
+CONFIG_PHY_DM816X_USB=m
+CONFIG_OMAP_USB2=y
+CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_VF610_OCOTP=y
-CONFIG_BCM2835_MBOX=y
CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_EFI_VARS=m
-CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
+CONFIG_EFI_VARS=m
+CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
-CONFIG_TMPFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_KEYSTONE_IRQ=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ST=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
CONFIG_CRYPTO_DEV_S5P=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=m
+CONFIG_CRYPTO_DEV_ATMEL_TDES=m
+CONFIG_CRYPTO_DEV_ATMEL_SHA=m
CONFIG_CRYPTO_DEV_SUN4I_SS=m
CONFIG_CRYPTO_DEV_ROCKCHIP=m
CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
-CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_DEV_ATMEL_AES=m
-CONFIG_CRYPTO_DEV_ATMEL_TDES=m
-CONFIG_CRYPTO_DEV_ATMEL_SHA=m
-CONFIG_VIDEO_VIVID=m
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VIRTIO_MMIO=y
+CONFIG_CRYPTO_CRC32_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
select GPIOLIB
select ARM_AMBA
select PINCTRL
+ select PCI_DOMAINS if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
- GPIO_ACTIVE_LOW),
+ GPIO_ACTIVE_HIGH),
},
};
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
+ select PCI_DOMAINS if PCI
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
interrupts = <0 99 4>;
resets = <&rst SPIM0_RESET>;
reg-io-width = <4>;
- num-chipselect = <4>;
- bus-num = <0>;
+ num-cs = <4>;
status = "disabled";
};
interrupts = <0 100 4>;
resets = <&rst SPIM1_RESET>;
reg-io-width = <4>;
- num-chipselect = <4>;
- bus-num = <0>;
+ num-cs = <4>;
status = "disabled";
};
ðmac {
status = "okay";
- phy-mode = "rgmii";
pinctrl-0 = <ð_rgmii_y_pins>;
pinctrl-names = "default";
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ eee-broken-1000t;
+ };
+ };
};
&uart_A {
sd_emmc_b: sd@5000 {
compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x5000 0x0 0x2000>;
+ reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_B>,
sd_emmc_c: mmc@7000 {
compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x7000 0x0 0x2000>;
+ reg = <0x0 0x7000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_C>,
no-map;
};
+ /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved_alt: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
sd_emmc_a: mmc@70000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x70000 0x0 0x2000>;
+ reg = <0x0 0x70000 0x0 0x800>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_b: mmc@72000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x72000 0x0 0x2000>;
+ reg = <0x0 0x72000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_c: mmc@74000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x74000 0x0 0x2000>;
+ reg = <0x0 0x74000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
&apb {
mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
&usb0 {
status = "okay";
};
+
+&usb2_phy0 {
+ /*
+ * HDMI_5V is also used as supply for the USB VBUS.
+ */
+ phy-supply = <&hdmi_5v>;
+};
/ {
compatible = "amlogic,meson-gxl";
- reserved-memory {
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved_alt: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
- };
-
soc {
usb0: usb@c9000000 {
status = "disabled";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <4>;
reg = <0x66080000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
reg = <0x660b0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
enet-phy-lane-swap;
};
+&sdio0 {
+ mmc-ddr-1_8v;
+};
+
&uart2 {
status = "okay";
};
&gphy0 {
enet-phy-lane-swap;
};
+
+&sdio0 {
+ mmc-ddr-1_8v;
+};
reg = <0x000b0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
reg = <0x000e0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
vmmc-supply = <&wlan_en>;
ti,non-removable;
non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "ok";
dwmmc_2: dwmmc2@f723f000 {
bus-width = <0x4>;
non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
vmmc-supply = <®_vdd_3v3>;
mmc-pwrseq = <&wl1835_pwrseq>;
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x10>;
+ reg = <0x1e0000 0x440>;
#interrupt-cells = <3>;
interrupt-controller;
msi-parent = <&gicp>;
serial@75b1000 {
label = "LS-UART0";
- status = "okay";
+ status = "disabled";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_4pins_default>;
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
port@0 {
reg = <0>;
- etf_out: endpoint {
+ etf_in: endpoint {
slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
port@1 {
reg = <0>;
- etf_in: endpoint {
+ etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
sound {
compatible = "audio-graph-card";
label = "UniPhier LD11";
- widgets = "Headphone", "Headphone Jack";
+ widgets = "Headphone", "Headphones";
dais = <&i2s_port2
&i2s_port3
&i2s_port4
sound {
compatible = "audio-graph-card";
label = "UniPhier LD20";
- widgets = "Headphone", "Headphone Jack";
+ widgets = "Headphone", "Headphones";
dais = <&i2s_port2
&i2s_port3
&i2s_port4
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A7796=y
CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_SPRD=y
-CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_ZX=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCI_IOV=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_KIRIN=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR=y
-CONFIG_PCIE_ROCKCHIP=y
-CONFIG_PCIE_ROCKCHIP_HOST=m
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_KIRIN=y
+CONFIG_PCIE_HISI_STB=y
CONFIG_ARM64_VA_BITS_48=y
CONFIG_SCHED_MC=y
CONFIG_NUMA=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPUFREQ_DT=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_TEGRA186_CPUFREQ=y
-CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
-CONFIG_DWMAC_IPQ806X=m
-CONFIG_DWMAC_MESON=m
-CONFIG_DWMAC_ROCKCHIP=m
-CONFIG_DWMAC_SUNXI=m
-CONFIG_DWMAC_SUN8I=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_AT803X_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_ADC=m
-CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_INPUT_MISC=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=11
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=y
-CONFIG_I2C_HID=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_ARMADA_3700=y
-CONFIG_SPI_MESON_SPICC=m
-CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
-CONFIG_SPI_QUP=y
CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_QUP=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
-CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
-CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_MT7622=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_PL061=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
-CONFIG_RCAR_GEN3_THERMAL=y
-CONFIG_QCOM_TSENS=y
-CONFIG_ROCKCHIP_THERMAL=m
CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_QCOM_TSENS=y
CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
+CONFIG_RC_CORE=m
+CONFIG_RC_DECODERS=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_MESON=m
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
-CONFIG_MEDIA_RC_SUPPORT=y
-CONFIG_RC_CORE=m
-CONFIG_RC_DEVICES=y
-CONFIG_RC_DECODERS=y
-CONFIG_IR_MESON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_NET is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
-CONFIG_DRM_RCAR_VSP=y
+CONFIG_DRM_RCAR_LVDS=m
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_LP855X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_I2C_HID=m
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SPI=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_XGENE=y
-CONFIG_RTC_DRV_CROS_EC=y
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=m
CONFIG_K3_DMA=y
CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
-CONFIG_HI6220_MBOX=y
CONFIG_QCOM_APCS_IPC=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_MEMORY=y
-CONFIG_TEGRA_MC=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_ROCKCHIP_SARADC=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_TEGRA=m
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
-CONFIG_PHY_RCAR_GEN3_USB2=y
-CONFIG_PHY_RCAR_GEN3_USB3=m
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PHY_QCOM_QMP=m
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=y
-CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
-CONFIG_MESON_EFUSE=m
CONFIG_QCOM_QFPROM=y
CONFIG_ROCKCHIP_EFUSE=y
CONFIG_UNIPHIER_EFUSE=y
+CONFIG_MESON_EFUSE=m
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ACPI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_EXT2_FS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA256_ARM64=m
-CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_CRC32_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64=m
-CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
-CONFIG_CRYPTO_SHA512_ARM64_CE=m
-CONFIG_CRYPTO_SHA3_ARM64=m
-CONFIG_CRYPTO_SM3_ARM64_CE=m
__le32 *origptr, __le32 *updptr, int nr_inst);
void __init apply_alternatives_all(void);
-void apply_alternatives(void *start, size_t length);
+
+#ifdef CONFIG_MODULES
+void apply_alternatives_module(void *start, size_t length);
+#else
+static inline void apply_alternatives_module(void *start, size_t length) { }
+#endif
#define ALTINSTR_ENTRY(feature,cb) \
" .word 661b - .\n" /* label */ \
* Only if the new pte is valid and kernel, otherwise TLB maintenance
* or update_mmu_cache() have the necessary barriers.
*/
- if (pte_valid_not_user(pte)) {
+ if (pte_valid_not_user(pte))
dsb(ishst);
- isb();
- }
}
extern void __sync_icache_dcache(pte_t pteval);
{
WRITE_ONCE(*pmdp, pmd);
dsb(ishst);
- isb();
}
static inline void pmd_clear(pmd_t *pmdp)
{
WRITE_ONCE(*pudp, pud);
dsb(ishst);
- isb();
}
static inline void pud_clear(pud_t *pudp)
}
}
-static void __apply_alternatives(void *alt_region, bool use_linear_alias)
+/*
+ * We provide our own, private D-cache cleaning function so that we don't
+ * accidentally call into the cache.S code, which is patched by us at
+ * runtime.
+ */
+static void clean_dcache_range_nopatch(u64 start, u64 end)
+{
+ u64 cur, d_size, ctr_el0;
+
+ ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
+ d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0,
+ CTR_DMINLINE_SHIFT);
+ cur = start & ~(d_size - 1);
+ do {
+ /*
+ * We must clean+invalidate to the PoC in order to avoid
+ * Cortex-A53 errata 826319, 827319, 824069 and 819472
+ * (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE)
+ */
+ asm volatile("dc civac, %0" : : "r" (cur) : "memory");
+ } while (cur += d_size, cur < end);
+}
+
+static void __apply_alternatives(void *alt_region, bool is_module)
{
struct alt_instr *alt;
struct alt_region *region = alt_region;
pr_info_once("patching kernel code\n");
origptr = ALT_ORIG_PTR(alt);
- updptr = use_linear_alias ? lm_alias(origptr) : origptr;
+ updptr = is_module ? origptr : lm_alias(origptr);
nr_inst = alt->orig_len / AARCH64_INSN_SIZE;
if (alt->cpufeature < ARM64_CB_PATCH)
alt_cb(alt, origptr, updptr, nr_inst);
- flush_icache_range((uintptr_t)origptr,
- (uintptr_t)(origptr + nr_inst));
+ if (!is_module) {
+ clean_dcache_range_nopatch((u64)origptr,
+ (u64)(origptr + nr_inst));
+ }
+ }
+
+ /*
+ * The core module code takes care of cache maintenance in
+ * flush_module_icache().
+ */
+ if (!is_module) {
+ dsb(ish);
+ __flush_icache_all();
+ isb();
}
}
isb();
} else {
BUG_ON(alternatives_applied);
- __apply_alternatives(®ion, true);
+ __apply_alternatives(®ion, false);
/* Barriers provided by the cache flushing */
WRITE_ONCE(alternatives_applied, 1);
}
stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask);
}
-void apply_alternatives(void *start, size_t length)
+#ifdef CONFIG_MODULES
+void apply_alternatives_module(void *start, size_t length)
{
struct alt_region region = {
.begin = start,
.end = start + length,
};
- __apply_alternatives(®ion, false);
+ __apply_alternatives(®ion, true);
}
+#endif
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
- if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) {
- apply_alternatives((void *)s->sh_addr, s->sh_size);
- }
+ if (strcmp(".altinstructions", secstrs + s->sh_name) == 0)
+ apply_alternatives_module((void *)s->sh_addr, s->sh_size);
#ifdef CONFIG_ARM64_MODULE_PLTS
if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
!strcmp(".text.ftrace_trampoline", secstrs + s->sh_name))
source "lib/Kconfig.debug"
-config HEART_BEAT
- bool "Heart beat function for kernel"
- default n
- help
- This option turns on/off heart beat kernel functionality.
- First GPIO node is taken.
-
endmenu
extern char *klimit;
-void microblaze_heartbeat(void);
-void microblaze_setup_heartbeat(void);
-
# ifdef CONFIG_MMU
extern void mmu_reset(void);
# endif /* CONFIG_MMU */
-extern void of_platform_reset_gpio_probe(void);
-
void time_init(void);
void init_IRQ(void);
void machine_early_init(const char *cmdline, unsigned int ram,
#endif /* __ASSEMBLY__ */
-#define __NR_syscalls 399
+#define __NR_syscalls 401
#endif /* _ASM_MICROBLAZE_UNISTD_H */
#define __NR_pkey_alloc 396
#define __NR_pkey_free 397
#define __NR_statx 398
+#define __NR_io_pgetevents 399
+#define __NR_rseq 400
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
CFLAGS_REMOVE_timer.o = -pg
CFLAGS_REMOVE_intc.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
-CFLAGS_REMOVE_heartbeat.o = -pg
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_process.o = -pg
endif
obj-y += dma.o exceptions.o \
hw_exception_handler.o irq.o \
- platform.o process.o prom.o ptrace.o \
+ process.o prom.o ptrace.o \
reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
obj-y += cpu/
-obj-$(CONFIG_HEART_BEAT) += heartbeat.o
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
obj-$(CONFIG_MMU) += misc.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
+++ /dev/null
-/*
- * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2007-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/sched.h>
-#include <linux/sched/loadavg.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-
-static unsigned int base_addr;
-
-void microblaze_heartbeat(void)
-{
- static unsigned int cnt, period, dist;
-
- if (base_addr) {
- if (cnt == 0 || cnt == dist)
- out_be32(base_addr, 1);
- else if (cnt == 7 || cnt == dist + 7)
- out_be32(base_addr, 0);
-
- if (++cnt > period) {
- cnt = 0;
- /*
- * The hyperbolic function below modifies the heartbeat
- * period length in dependency of the current (5min)
- * load. It goes through the points f(0)=126, f(1)=86,
- * f(5)=51, f(inf)->30.
- */
- period = ((672 << FSHIFT) / (5 * avenrun[0] +
- (7 << FSHIFT))) + 30;
- dist = period / 4;
- }
- }
-}
-
-void microblaze_setup_heartbeat(void)
-{
- struct device_node *gpio = NULL;
- int *prop;
- int j;
- const char * const gpio_list[] = {
- "xlnx,xps-gpio-1.00.a",
- NULL
- };
-
- for (j = 0; gpio_list[j] != NULL; j++) {
- gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]);
- if (gpio)
- break;
- }
-
- if (gpio) {
- base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL));
- base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
- pr_notice("Heartbeat GPIO at 0x%x\n", base_addr);
-
- /* GPIO is configured as output */
- prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL);
- if (prop)
- out_be32(base_addr + 4, 0);
- }
-}
+++ /dev/null
-/*
- * Copyright 2008 Michal Simek <monstr@monstr.eu>
- *
- * based on virtex.c file
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/setup.h>
-
-static struct of_device_id xilinx_of_bus_ids[] __initdata = {
- { .compatible = "simple-bus", },
- { .compatible = "xlnx,compound", },
- {}
-};
-
-static int __init microblaze_device_probe(void)
-{
- of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
- of_platform_reset_gpio_probe();
- return 0;
-}
-device_initcall(microblaze_device_probe);
static int handle; /* reset pin handle */
static unsigned int reset_val;
-void of_platform_reset_gpio_probe(void)
+static int of_platform_reset_gpio_probe(void)
{
int ret;
handle = of_get_named_gpio(of_find_node_by_path("/"),
if (!gpio_is_valid(handle)) {
pr_info("Skipping unavailable RESET gpio %d (%s)\n",
handle, "reset");
- return;
+ return -ENODEV;
}
ret = gpio_request(handle, "reset");
if (ret < 0) {
pr_info("GPIO pin is already allocated\n");
- return;
+ return ret;
}
/* get current setup value */
pr_info("RESET: Registered gpio device: %d, current val: %d\n",
handle, reset_val);
- return;
+ return 0;
err:
gpio_free(handle);
- return;
+ return ret;
}
+device_initcall(of_platform_reset_gpio_probe);
static void gpio_system_reset(void)
.long sys_pkey_alloc
.long sys_pkey_free
.long sys_statx
+ .long sys_io_pgetevents
+ .long sys_rseq
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_xilinx_timer;
-#ifdef CONFIG_HEART_BEAT
- microblaze_heartbeat();
-#endif
timer_ack();
evt->event_handler(evt);
return IRQ_HANDLED;
return ret;
}
-#ifdef CONFIG_HEART_BEAT
- microblaze_setup_heartbeat();
-#endif
-
ret = xilinx_clocksource_init();
if (ret)
return ret;
regs->regs[0] = 0; /* Don't deal with this again. */
}
- rseq_signal_deliver(regs);
+ rseq_signal_deliver(ksig, regs);
if (sig_uses_siginfo(&ksig->ka, abi))
ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
- rseq_handle_notify_resume(regs);
+ rseq_handle_notify_resume(NULL, regs);
}
user_enter();
config PARISC_PAGE_SIZE_16KB
bool "16KB"
- depends on PA8X00
+ depends on PA8X00 && BROKEN
config PARISC_PAGE_SIZE_64KB
bool "64KB"
- depends on PA8X00
+ depends on PA8X00 && BROKEN
endchoice
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
- default "32"
+ default "4"
endmenu
# kernel.
cflags-y += -mdisable-fpregs
-# Without this, "ld -r" results in .text sections that are too big
-# (> 0x40000) for branches to reach stubs.
-cflags-y += -ffunction-sections
-
# Use long jumps instead of long branches (needed if your linker fails to
# link a too big vmlinux executable). Not enabled for building modules.
ifdef CONFIG_MLONGCALLS
unsigned long sig[_NSIG_WORDS];
} sigset_t;
-#ifndef __KERNEL__
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-#endif
-
#include <asm/sigcontext.h>
#endif /* !__ASSEMBLY */
#define __NR_preadv2 (__NR_Linux + 347)
#define __NR_pwritev2 (__NR_Linux + 348)
#define __NR_statx (__NR_Linux + 349)
+#define __NR_io_pgetevents (__NR_Linux + 350)
-#define __NR_Linux_syscalls (__NR_statx + 1)
+#define __NR_Linux_syscalls (__NR_io_pgetevents + 1)
#define __IGNORE_select /* newselect */
{
/* FIXME: we need this because apparently the sti
* driver can be registered twice */
- if(driver->drv.name) {
- printk(KERN_WARNING
- "BUG: skipping previously registered driver %s\n",
- driver->name);
+ if (driver->drv.name) {
+ pr_warn("BUG: skipping previously registered driver %s\n",
+ driver->name);
return 1;
}
if (!driver->probe) {
- printk(KERN_WARNING
- "BUG: driver %s has no probe routine\n",
- driver->name);
+ pr_warn("BUG: driver %s has no probe routine\n", driver->name);
return 1;
}
dev = create_parisc_device(mod_path);
if (dev->id.hw_type != HPHW_FAULTY) {
- printk(KERN_ERR "Two devices have hardware path [%s]. "
- "IODC data for second device: "
- "%02x%02x%02x%02x%02x%02x\n"
- "Rearranging GSC cards sometimes helps\n",
- parisc_pathname(dev), iodc_data[0], iodc_data[1],
- iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]);
+ pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n"
+ "Rearranging GSC cards sometimes helps\n",
+ parisc_pathname(dev), iodc_data);
return NULL;
}
* the keyboard controller
*/
if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
- printk("Unable to claim HPA %lx for device %s\n",
- hpa, name);
+ pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name);
return dev;
}
static int count;
print_pa_hwpath(dev, hw_path);
- printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
+ pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
ENTRY_COMP(preadv2)
ENTRY_COMP(pwritev2)
ENTRY_SAME(statx)
+ ENTRY_COMP(io_pgetevents) /* 350 */
.ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))
/* #define DEBUG 1 */
#ifdef DEBUG
-#define dbg(x...) printk(x)
+#define dbg(x...) pr_debug(x)
#else
#define dbg(x...)
#endif
start = (long)&__start___unwind[0];
stop = (long)&__stop___unwind[0];
- printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n",
+ dbg("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n",
start, stop,
(stop - start) / sizeof(struct unwind_table_entry));
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
unsigned long address)
{
- pgtable_page_dtor(table);
pgtable_free_tlb(tlb, page_address(table), 0);
}
#endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */
unsigned long address)
{
tlb_flush_pgtable(tlb, address);
- pgtable_page_dtor(table);
pgtable_free_tlb(tlb, page_address(table), 0);
}
#endif /* _ASM_POWERPC_PGALLOC_32_H */
SYSCALL(pkey_free)
SYSCALL(pkey_mprotect)
SYSCALL(rseq)
+COMPAT_SYS(io_pgetevents)
#include <uapi/asm/unistd.h>
-#define NR_syscalls 388
+#define NR_syscalls 389
#define __NR__exit __NR_exit
#define __NR_pkey_free 385
#define __NR_pkey_mprotect 386
#define __NR_rseq 387
+#define __NR_io_pgetevents 388
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
* Note that the returned IO or memory base is a physical address
*/
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE3(pciconfig_iobase, long, which,
unsigned long, bus, unsigned long, devfn)
{
return result;
}
-#pragma GCC diagnostic pop
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus,
unsigned long, in_devfn)
{
return -EOPNOTSUPP;
}
-#pragma GCC diagnostic pop
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
}
/* We assume to be passed big endian arguments */
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
{
struct rtas_args args;
return 0;
}
-#pragma GCC diagnostic pop
/*
* Call early during boot, before mem init, to retrieve the RTAS
}
#endif
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
#ifdef CONFIG_PPC64
COMPAT_SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
struct ucontext __user *, new_ctx, int, ctx_size)
set_thread_flag(TIF_RESTOREALL);
return 0;
}
-#pragma GCC diagnostic pop
#ifdef CONFIG_PPC64
COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
return 0;
}
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
#ifdef CONFIG_PPC32
SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx,
int, ndbg, struct sig_dbg_op __user *, dbg)
return 0;
}
#endif
-#pragma GCC diagnostic pop
/*
* OK, we're invoking a handler
/*
* Handle {get,set,swap}_context operations
*/
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
struct ucontext __user *, new_ctx, long, ctx_size)
{
set_thread_flag(TIF_RESTOREALL);
return 0;
}
-#pragma GCC diagnostic pop
/*
return ret;
}
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE6(mmap2, unsigned long, addr, size_t, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, unsigned long, pgoff)
{
return do_mmap2(addr, len, prot, flags, fd, offset, PAGE_SHIFT);
}
-#pragma GCC diagnostic pop
#ifdef CONFIG_PPC32
/*
* in a 2-bit field won't allow writes to a page that is otherwise
* write-protected.
*/
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wpragmas"
-#pragma GCC diagnostic ignored "-Wattribute-alias"
SYSCALL_DEFINE3(subpage_prot, unsigned long, addr,
unsigned long, len, u32 __user *, map)
{
up_write(&mm->mmap_sem);
return err;
}
-#pragma GCC diagnostic pop
#define DBG(x...)
#endif
-/* Apparently the RTC stores seconds since 1 Jan 1904 */
+/*
+ * Offset between Unix time (1970-based) and Mac time (1904-based). Cuda and PMU
+ * times wrap in 2040. If we need to handle later times, the read_time functions
+ * need to be changed to interpret wrapped times as post-2040.
+ */
#define RTC_OFFSET 2082844800
/*
if (req.reply_len != 7)
printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
req.reply_len);
- now = (req.reply[3] << 24) + (req.reply[4] << 16)
- + (req.reply[5] << 8) + req.reply[6];
+ now = (u32)((req.reply[3] << 24) + (req.reply[4] << 16) +
+ (req.reply[5] << 8) + req.reply[6]);
+ /* it's either after year 2040, or the RTC has gone backwards */
+ WARN_ON(now < RTC_OFFSET);
+
return now - RTC_OFFSET;
}
static int cuda_set_rtc_time(struct rtc_time *tm)
{
- time64_t nowtime;
+ u32 nowtime;
struct adb_request req;
- nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET;
+ nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET);
if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
nowtime >> 24, nowtime >> 16, nowtime >> 8,
nowtime) < 0)
if (req.reply_len != 4)
printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
req.reply_len);
- now = (req.reply[0] << 24) + (req.reply[1] << 16)
- + (req.reply[2] << 8) + req.reply[3];
+ now = (u32)((req.reply[0] << 24) + (req.reply[1] << 16) +
+ (req.reply[2] << 8) + req.reply[3]);
+
+ /* it's either after year 2040, or the RTC has gone backwards */
+ WARN_ON(now < RTC_OFFSET);
+
return now - RTC_OFFSET;
}
static int pmu_set_rtc_time(struct rtc_time *tm)
{
- time64_t nowtime;
+ u32 nowtime;
struct adb_request req;
- nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET;
+ nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET);
if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
nowtime >> 16, nowtime >> 8, nowtime) < 0)
return -ENXIO;
* whereas POPF does not.)
*/
addl $PT_EFLAGS-PT_DS, %esp /* point esp at pt_regs->flags */
- btr $X86_EFLAGS_IF_BIT, (%esp)
+ btrl $X86_EFLAGS_IF_BIT, (%esp)
popfl
/*
pushq %rdx /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
pushq $-ENOSYS /* pt_regs->ax */
- pushq %r8 /* pt_regs->r8 */
+ pushq $0 /* pt_regs->r8 = 0 */
xorl %r8d, %r8d /* nospec r8 */
- pushq %r9 /* pt_regs->r9 */
+ pushq $0 /* pt_regs->r9 = 0 */
xorl %r9d, %r9d /* nospec r9 */
- pushq %r10 /* pt_regs->r10 */
+ pushq $0 /* pt_regs->r10 = 0 */
xorl %r10d, %r10d /* nospec r10 */
- pushq %r11 /* pt_regs->r11 */
+ pushq $0 /* pt_regs->r11 = 0 */
xorl %r11d, %r11d /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
xorl %ebx, %ebx /* nospec rbx */
pushq %rcx /* pt_regs->cx */
xorl %ecx, %ecx /* nospec cx */
pushq $-ENOSYS /* pt_regs->ax */
- pushq $0 /* pt_regs->r8 = 0 */
+ pushq %r8 /* pt_regs->r8 */
xorl %r8d, %r8d /* nospec r8 */
- pushq $0 /* pt_regs->r9 = 0 */
+ pushq %r9 /* pt_regs->r9 */
xorl %r9d, %r9d /* nospec r9 */
- pushq $0 /* pt_regs->r10 = 0 */
+ pushq %r10 /* pt_regs->r10*/
xorl %r10d, %r10d /* nospec r10 */
- pushq $0 /* pt_regs->r11 = 0 */
+ pushq %r11 /* pt_regs->r11 */
xorl %r11d, %r11d /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
xorl %ebx, %ebx /* nospec rbx */
static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
{
+ if (!pgtable_l5_enabled())
+ return;
+
BUG_ON((unsigned long)p4d & (PAGE_SIZE-1));
free_page((unsigned long)p4d);
}
#define pgd_page(pgd) pfn_to_page(pgd_pfn(pgd))
/* to find an entry in a page-table-directory. */
-static __always_inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
+static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
{
if (!pgtable_l5_enabled())
return (p4d_t *)pgd;
}
#endif
-static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d)
+static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d)
{
pgd_t pgd;
*p4dp = native_make_p4d(native_pgd_val(pgd));
}
-static __always_inline void native_p4d_clear(p4d_t *p4d)
+static inline void native_p4d_clear(p4d_t *p4d)
{
native_set_p4d(p4d, native_make_p4d(0));
}
{
int i;
u64 end;
+ u64 addr = 0;
/*
* The bootstrap memblock region count maximum is 128 entries
struct e820_entry *entry = &e820_table->entries[i];
end = entry->addr + entry->size;
+ if (addr < entry->addr)
+ memblock_reserve(addr, entry->addr - addr);
+ addr = end;
if (end != (resource_size_t)end)
continue;
+ /*
+ * all !E820_TYPE_RAM ranges (including gap ranges) are put
+ * into memblock.reserved to make sure that struct pages in
+ * such regions are not left uninitialized after bootup.
+ */
if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN)
- continue;
-
- memblock_add(entry->addr, entry->size);
+ memblock_reserve(entry->addr, entry->size);
+ else
+ memblock_add(entry->addr, entry->size);
}
/* Throw away partial pages: */
return 0;
}
-static const char nx_warning[] = KERN_CRIT
-"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n";
-static const char smep_warning[] = KERN_CRIT
-"unable to execute userspace code (SMEP?) (uid: %d)\n";
-
static void
show_fault_oops(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
pte = lookup_address_in_pgd(pgd, address, &level);
if (pte && pte_present(*pte) && !pte_exec(*pte))
- printk(nx_warning, from_kuid(&init_user_ns, current_uid()));
+ pr_crit("kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n",
+ from_kuid(&init_user_ns, current_uid()));
if (pte && pte_present(*pte) && pte_exec(*pte) &&
(pgd_flags(*pgd) & _PAGE_USER) &&
(__read_cr4() & X86_CR4_SMEP))
- printk(smep_warning, from_kuid(&init_user_ns, current_uid()));
+ pr_crit("unable to execute userspace code (SMEP?) (uid: %d)\n",
+ from_kuid(&init_user_ns, current_uid()));
}
- printk(KERN_ALERT "BUG: unable to handle kernel ");
- if (address < PAGE_SIZE)
- printk(KERN_CONT "NULL pointer dereference");
- else
- printk(KERN_CONT "paging request");
-
- printk(KERN_CONT " at %px\n", (void *) address);
+ pr_alert("BUG: unable to handle kernel %s at %px\n",
+ address < PAGE_SIZE ? "NULL pointer dereference" : "paging request",
+ (void *)address);
dump_pagetable(address);
}
pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE);
set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]);
- if (!(pgd_val(*pgd) & _PAGE_PRESENT))
+ if (!pgd_present(*pgd))
continue;
for (i = 0; i < PTRS_PER_P4D; i++) {
p4d = p4d_offset(pgd,
pgd_idx * PGDIR_SIZE + i * P4D_SIZE);
- if (!(p4d_val(*p4d) & _PAGE_PRESENT))
+ if (!p4d_present(*p4d))
continue;
pud = (pud_t *)p4d_page_vaddr(*p4d);
dst->cpu = src->cpu;
dst->__sector = blk_rq_pos(src);
dst->__data_len = blk_rq_bytes(src);
+ if (src->rq_flags & RQF_SPECIAL_PAYLOAD) {
+ dst->rq_flags |= RQF_SPECIAL_PAYLOAD;
+ dst->special_vec = src->special_vec;
+ }
dst->nr_phys_segments = src->nr_phys_segments;
dst->ioprio = src->ioprio;
dst->extra_len = src->extra_len;
#define BLK_MQ_RESOURCE_DELAY 3 /* ms units */
+/*
+ * Returns true if we did some work AND can potentially do more.
+ */
bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
bool got_budget)
{
blk_mq_run_hw_queue(hctx, true);
else if (needs_restart && (ret == BLK_STS_RESOURCE))
blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY);
+
+ return false;
}
+ /*
+ * If the host/device is unable to accept more work, inform the
+ * caller of that.
+ */
+ if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE)
+ return false;
+
return (queued + errors) != 0;
}
#include <linux/kernel.h>
-extern const char __initdata *const blacklist_hashes[];
+extern const char __initconst *const blacklist_hashes[];
}
EXPORT_SYMBOL_GPL(af_alg_async_cb);
-__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events)
+/**
+ * af_alg_poll - poll system call handler
+ */
+__poll_t af_alg_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
struct alg_sock *ask = alg_sk(sk);
struct af_alg_ctx *ctx = ask->private;
- __poll_t mask = 0;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
if (!ctx->more || ctx->used)
mask |= EPOLLIN | EPOLLRDNORM;
return mask;
}
-EXPORT_SYMBOL_GPL(af_alg_poll_mask);
+EXPORT_SYMBOL_GPL(af_alg_poll);
/**
* af_alg_alloc_areq - allocate struct af_alg_async_req
.sendmsg = aead_sendmsg,
.sendpage = af_alg_sendpage,
.recvmsg = aead_recvmsg,
- .poll_mask = af_alg_poll_mask,
+ .poll = af_alg_poll,
};
static int aead_check_key(struct socket *sock)
.sendmsg = aead_sendmsg_nokey,
.sendpage = aead_sendpage_nokey,
.recvmsg = aead_recvmsg_nokey,
- .poll_mask = af_alg_poll_mask,
+ .poll = af_alg_poll,
};
static void *aead_bind(const char *name, u32 type, u32 mask)
.sendmsg = skcipher_sendmsg,
.sendpage = af_alg_sendpage,
.recvmsg = skcipher_recvmsg,
- .poll_mask = af_alg_poll_mask,
+ .poll = af_alg_poll,
};
static int skcipher_check_key(struct socket *sock)
.sendmsg = skcipher_sendmsg_nokey,
.sendpage = skcipher_sendpage_nokey,
.recvmsg = skcipher_recvmsg_nokey,
- .poll_mask = af_alg_poll_mask,
+ .poll = af_alg_poll,
};
static void *skcipher_bind(const char *name, u32 type, u32 mask)
return -EINVAL;
}
+ if (strcmp(ctx->cert->sig->pkey_algo, "rsa") == 0) {
+ /* Discard the BIT STRING metadata */
+ if (vlen < 1 || *(const u8 *)value != 0)
+ return -EBADMSG;
+
+ value++;
+ vlen--;
+ }
+
ctx->cert->raw_sig = value;
ctx->cert->raw_sig_size = vlen;
return 0;
* power domain corresponding to a DT node's "required-opps" property.
*
* @dev: Device for which the performance-state needs to be found.
- * @opp_node: DT node where the "required-opps" property is present. This can be
+ * @np: DT node where the "required-opps" property is present. This can be
* the device node itself (if it doesn't have an OPP table) or a node
* within the OPP table of a device (if device has an OPP table).
- * @state: Pointer to return performance state.
*
* Returns performance state corresponding to the "required-opps" property of
* a DT node. This calls platform specific genpd->opp_to_performance_state()
* Returns performance state on success and 0 on failure.
*/
unsigned int of_genpd_opp_to_performance_state(struct device *dev,
- struct device_node *opp_node)
+ struct device_node *np)
{
struct generic_pm_domain *genpd;
struct dev_pm_opp *opp;
genpd_lock(genpd);
- opp = of_dev_pm_opp_find_required_opp(&genpd->dev, opp_node);
+ opp = of_dev_pm_opp_find_required_opp(&genpd->dev, np);
if (IS_ERR(opp)) {
dev_err(dev, "Failed to find required OPP: %ld\n",
PTR_ERR(opp));
_drbd_start_io_acct(device, req);
/* process discards always from our submitter thread */
- if ((bio_op(bio) & REQ_OP_WRITE_ZEROES) ||
- (bio_op(bio) & REQ_OP_DISCARD))
+ if (bio_op(bio) == REQ_OP_WRITE_ZEROES ||
+ bio_op(bio) == REQ_OP_DISCARD)
goto queue_for_submitter_thread;
if (rw == WRITE && req->private_bio && req->i.size
/*
* Static global variables
*/
-static DECLARE_WAIT_QUEUE_HEAD(random_wait);
+static DECLARE_WAIT_QUEUE_HEAD(random_read_wait);
+static DECLARE_WAIT_QUEUE_HEAD(random_write_wait);
static struct fasync_struct *fasync;
static DEFINE_SPINLOCK(random_ready_list_lock);
/* should we wake readers? */
if (entropy_bits >= random_read_wakeup_bits &&
- wq_has_sleeper(&random_wait)) {
- wake_up_interruptible_poll(&random_wait, POLLIN);
+ wq_has_sleeper(&random_read_wait)) {
+ wake_up_interruptible(&random_read_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
}
/* If the input pool is getting full, send some
trace_debit_entropy(r->name, 8 * ibytes);
if (ibytes &&
(r->entropy_count >> ENTROPY_SHIFT) < random_write_wakeup_bits) {
- wake_up_interruptible_poll(&random_wait, POLLOUT);
+ wake_up_interruptible(&random_write_wait);
kill_fasync(&fasync, SIGIO, POLL_OUT);
}
if (nonblock)
return -EAGAIN;
- wait_event_interruptible(random_wait,
+ wait_event_interruptible(random_read_wait,
ENTROPY_BITS(&input_pool) >=
random_read_wakeup_bits);
if (signal_pending(current))
return ret;
}
-static struct wait_queue_head *
-random_get_poll_head(struct file *file, __poll_t events)
-{
- return &random_wait;
-}
-
static __poll_t
-random_poll_mask(struct file *file, __poll_t events)
+random_poll(struct file *file, poll_table * wait)
{
- __poll_t mask = 0;
+ __poll_t mask;
+ poll_wait(file, &random_read_wait, wait);
+ poll_wait(file, &random_write_wait, wait);
+ mask = 0;
if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits)
mask |= EPOLLIN | EPOLLRDNORM;
if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits)
const struct file_operations random_fops = {
.read = random_read,
.write = random_write,
- .get_poll_head = random_get_poll_head,
- .poll_mask = random_poll_mask,
+ .poll = random_poll,
.unlocked_ioctl = random_ioctl,
.fasync = random_fasync,
.llseek = noop_llseek,
* We'll be woken up again once below random_write_wakeup_thresh,
* or when the calling thread is about to terminate.
*/
- wait_event_interruptible(random_wait, kthread_should_stop() ||
+ wait_event_interruptible(random_write_wait, kthread_should_stop() ||
ENTROPY_BITS(&input_pool) <= random_write_wakeup_bits);
mix_pool_bytes(poolp, buffer, count);
credit_entropy_bits(poolp, entropy);
int ret;
cpu_dev = get_cpu_device(0);
- if (NULL == cpu_dev)
- ret = -ENODEV;
+ if (!cpu_dev)
+ return -ENODEV;
msm8996_version = qcom_cpufreq_kryo_get_msm_id();
if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
}
np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
- if (IS_ERR(np))
- return PTR_ERR(np);
+ if (!np)
+ return -ENOENT;
ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
if (!ret) {
{
struct dax_device *dax_dev;
bool dax_enabled = false;
+ struct request_queue *q;
pgoff_t pgoff;
int err, id;
void *kaddr;
return false;
}
+ q = bdev_get_queue(bdev);
+ if (!q || !blk_queue_dax(q)) {
+ pr_debug("%s: error: request queue doesn't support dax\n",
+ bdevname(bdev, buf));
+ return false;
+ }
+
err = bdev_dax_pgoff(bdev, 0, PAGE_SIZE, &pgoff);
if (err) {
pr_debug("%s: error: unaligned partition for dax\n",
struct amdgpu_device *adev = ring->adev;
uint64_t index;
- if (ring != &adev->uvd.inst[ring->me].ring) {
+ if (ring->funcs->type != AMDGPU_RING_TYPE_UVD) {
ring->fence_drv.cpu_addr = &adev->wb.wb[ring->fence_offs];
ring->fence_drv.gpu_addr = adev->wb.gpu_addr + (ring->fence_offs * 4);
} else {
unsigned long bo_size;
const char *fw_name;
const struct common_firmware_header *hdr;
- unsigned version_major, version_minor, family_id;
+ unsigned char fw_check;
int r;
INIT_DELAYED_WORK(&adev->vcn.idle_work, amdgpu_vcn_idle_work_handler);
hdr = (const struct common_firmware_header *)adev->vcn.fw->data;
adev->vcn.fw_version = le32_to_cpu(hdr->ucode_version);
- family_id = le32_to_cpu(hdr->ucode_version) & 0xff;
- version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff;
- version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff;
- DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n",
- version_major, version_minor, family_id);
+ /* Bit 20-23, it is encode major and non-zero for new naming convention.
+ * This field is part of version minor and DRM_DISABLED_FLAG in old naming
+ * convention. Since the l:wq!atest version minor is 0x5B and DRM_DISABLED_FLAG
+ * is zero in old naming convention, this field is always zero so far.
+ * These four bits are used to tell which naming convention is present.
+ */
+ fw_check = (le32_to_cpu(hdr->ucode_version) >> 20) & 0xf;
+ if (fw_check) {
+ unsigned int dec_ver, enc_major, enc_minor, vep, fw_rev;
+
+ fw_rev = le32_to_cpu(hdr->ucode_version) & 0xfff;
+ enc_minor = (le32_to_cpu(hdr->ucode_version) >> 12) & 0xff;
+ enc_major = fw_check;
+ dec_ver = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xf;
+ vep = (le32_to_cpu(hdr->ucode_version) >> 28) & 0xf;
+ DRM_INFO("Found VCN firmware Version ENC: %hu.%hu DEC: %hu VEP: %hu Revision: %hu\n",
+ enc_major, enc_minor, dec_ver, vep, fw_rev);
+ } else {
+ unsigned int version_major, version_minor, family_id;
+
+ family_id = le32_to_cpu(hdr->ucode_version) & 0xff;
+ version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff;
+ version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff;
+ DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n",
+ version_major, version_minor, family_id);
+ }
bo_size = AMDGPU_GPU_PAGE_ALIGN(le32_to_cpu(hdr->ucode_size_bytes) + 8)
+ AMDGPU_VCN_STACK_SIZE + AMDGPU_VCN_HEAP_SIZE
uint64_t count;
max_entries = min(max_entries, 16ull * 1024ull);
- for (count = 1; count < max_entries; ++count) {
+ for (count = 1;
+ count < max_entries / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE);
+ ++count) {
uint64_t idx = pfn + count;
if (pages_addr[idx] !=
dma_addr = pages_addr;
} else {
addr = pages_addr[pfn];
- max_entries = count;
+ max_entries = count * (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE);
}
} else if (flags & AMDGPU_PTE_VALID) {
if (r)
return r;
- pfn += last - start + 1;
+ pfn += (last - start + 1) / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE);
if (nodes && nodes->size == pfn) {
pfn = 0;
++nodes;
if (acrtc->base.state->event)
prepare_flip_isr(acrtc);
+ spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+
surface_updates->surface = dc_stream_get_status(acrtc_state->stream)->plane_states[0];
surface_updates->flip_addr = &addr;
-
dc_commit_updates_for_stream(adev->dm.dc,
surface_updates,
1,
__func__,
addr.address.grph.addr.high_part,
addr.address.grph.addr.low_part);
-
-
- spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
}
/*
struct drm_connector *connector;
struct drm_connector_state *old_con_state, *new_con_state;
struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state;
+ int crtc_disable_count = 0;
drm_atomic_helper_update_legacy_modeset_state(dev, state);
struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc);
bool modeset_needed;
+ if (old_crtc_state->active && !new_crtc_state->active)
+ crtc_disable_count++;
+
dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
modeset_needed = modeset_required(
* so we can put the GPU into runtime suspend if we're not driving any
* displays anymore
*/
+ for (i = 0; i < crtc_disable_count; i++)
+ pm_runtime_put_autosuspend(dev->dev);
pm_runtime_mark_last_busy(dev->dev);
- for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
- if (old_crtc_state->active && !new_crtc_state->active)
- pm_runtime_put_autosuspend(dev->dev);
- }
}
static void malidp_fini(struct drm_device *drm)
{
- drm_atomic_helper_shutdown(drm);
drm_mode_config_cleanup(drm);
}
malidp_de_irq_fini(drm);
drm->irq_enabled = false;
irq_init_fail:
+ drm_atomic_helper_shutdown(drm);
component_unbind_all(dev, drm);
bind_fail:
of_node_put(malidp->crtc.port);
malidp_se_irq_fini(drm);
malidp_de_irq_fini(drm);
drm->irq_enabled = false;
+ drm_atomic_helper_shutdown(drm);
component_unbind_all(dev, drm);
of_node_put(malidp->crtc.port);
malidp->crtc.port = NULL;
.vsync_irq = MALIDP500_DE_IRQ_VSYNC,
},
.se_irq_map = {
- .irq_mask = MALIDP500_SE_IRQ_CONF_MODE,
+ .irq_mask = MALIDP500_SE_IRQ_CONF_MODE |
+ MALIDP500_SE_IRQ_GLOBAL,
.vsync_irq = 0,
},
.dc_irq_map = {
/* Layer specific register offsets */
#define MALIDP_LAYER_FORMAT 0x000
+#define LAYER_FORMAT_MASK 0x3f
#define MALIDP_LAYER_CONTROL 0x004
#define LAYER_ENABLE (1 << 0)
#define LAYER_FLOWCFG_MASK 7
if (state->rotation & MALIDP_ROTATED_MASK) {
int val;
- val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_h,
- state->crtc_w,
+ val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_w,
+ state->crtc_h,
fb->format->format);
if (val < 0)
return val;
dest_w = plane->state->crtc_w;
dest_h = plane->state->crtc_h;
- malidp_hw_write(mp->hwdev, ms->format, mp->layer->base);
+ val = malidp_hw_read(mp->hwdev, mp->layer->base);
+ val = (val & ~LAYER_FORMAT_MASK) | ms->format;
+ malidp_hw_write(mp->hwdev, val, mp->layer->base);
for (i = 0; i < ms->n_planes; i++) {
/* calculate the offset for the layer's plane registers */
**/
static inline struct scatterlist *__sg_next(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
return sg_is_last(sg) ? NULL : ____sg_next(sg);
}
priv->io_base = regs;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi");
- if (!res)
- return -EINVAL;
+ if (!res) {
+ ret = -EINVAL;
+ goto free_drm;
+ }
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
if (!regs) {
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc");
- if (!res)
- return -EINVAL;
+ if (!res) {
+ ret = -EINVAL;
+ goto free_drm;
+ }
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
if (!regs) {
if (bit_adap->getscl == NULL)
adap->quirks = &i2c_bit_quirk_no_clk_stretch;
- /* Bring bus to a known state. Looks like STOP if bus is not free yet */
- setscl(bit_adap, 1);
- udelay(bit_adap->udelay);
- setsda(bit_adap, 1);
+ /*
+ * We tried forcing SCL/SDA to an initial state here. But that caused a
+ * regression, sadly. Check Bugzilla #200045 for details.
+ */
ret = add_adapter(adap);
if (ret < 0)
* required for an I2C bus.
*/
if (pdata->scl_is_open_drain)
- gflags = GPIOD_OUT_LOW;
+ gflags = GPIOD_OUT_HIGH;
else
- gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+ gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags);
if (IS_ERR(priv->scl))
return PTR_ERR(priv->scl);
status = i2c_transfer(adapter, msg, num);
if (status < 0)
- return status;
- if (status != num)
- return -EIO;
+ goto cleanup;
+ if (status != num) {
+ status = -EIO;
+ goto cleanup;
+ }
+ status = 0;
/* Check PEC if last message is a read */
if (i && (msg[num-1].flags & I2C_M_RD)) {
status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
if (status < 0)
- return status;
+ goto cleanup;
}
if (read_write == I2C_SMBUS_READ)
break;
}
+cleanup:
if (msg[0].flags & I2C_M_DMA_SAFE)
kfree(msg[0].buf);
if (msg[1].flags & I2C_M_DMA_SAFE)
kfree(msg[1].buf);
- return 0;
+ return status;
}
/**
* inactive, or if the tool type is changed, a new tracking id is
* assigned to the slot. The tool type is only reported if the
* corresponding absbit field is set.
+ *
+ * Returns true if contact is active.
*/
-void input_mt_report_slot_state(struct input_dev *dev,
+bool input_mt_report_slot_state(struct input_dev *dev,
unsigned int tool_type, bool active)
{
struct input_mt *mt = dev->mt;
int id;
if (!mt)
- return;
+ return false;
slot = &mt->slots[mt->slot];
slot->frame = mt->frame;
if (!active) {
input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
- return;
+ return false;
}
id = input_mt_get_value(slot, ABS_MT_TRACKING_ID);
- if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type)
+ if (id < 0)
id = input_mt_new_trkid(mt);
input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type);
+
+ return true;
}
EXPORT_SYMBOL(input_mt_report_slot_state);
u8 mapping;
u8 xtype;
} xpad_device[] = {
- { 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 },
+ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
static irqreturn_t events_interrupt(int irq, void *dev_id)
{
struct event_dev *edev = dev_id;
- unsigned type, code, value;
+ unsigned int type, code, value;
type = __raw_readl(edev->addr + REG_READ);
code = __raw_readl(edev->addr + REG_READ);
}
static void events_import_bits(struct event_dev *edev,
- unsigned long bits[], unsigned type, size_t count)
+ unsigned long bits[], unsigned int type, size_t count)
{
void __iomem *addr = edev->addr;
int i, j;
for (j = 0; j < ARRAY_SIZE(val); j++) {
int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32);
+
val[j] = __raw_readl(edev->addr + REG_DATA + offset);
}
struct input_dev *input_dev;
struct event_dev *edev;
struct resource *res;
- unsigned keymapnamelen;
+ unsigned int keymapnamelen;
void __iomem *addr;
int irq;
int i;
for (i = 0; i < keymapnamelen; i++)
edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
- pr_debug("events_probe() keymap=%s\n", edev->name);
+ pr_debug("%s: keymap=%s\n", __func__, edev->name);
input_dev->name = edev->name;
input_dev->id.bustype = BUS_HOST;
To compile this driver as a module, choose M here: the
module will be called rave-sp-pwrbutton.
+config INPUT_SC27XX_VIBRA
+ tristate "Spreadtrum sc27xx vibrator support"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for Spreadtrum sc27xx vibrator driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called sc27xx_vibra.
+
endif
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
+obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN BIT(9)
+#define LDO_VIBR_PD BIT(8)
+
+struct vibra_info {
+ struct input_dev *input_dev;
+ struct work_struct play_work;
+ struct regmap *regmap;
+ u32 base;
+ u32 strength;
+ bool enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+ if (on) {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, 0);
+ info->enabled = true;
+ } else {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+ LDO_VIBR_PD);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+ info->enabled = false;
+ }
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+ return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+ struct vibra_info *info = container_of(work, struct vibra_info,
+ play_work);
+
+ if (info->strength && !info->enabled)
+ sc27xx_vibra_set(info, true);
+ else if (info->strength == 0 && info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ info->strength = effect->u.rumble.weak_magnitude;
+ schedule_work(&info->play_work);
+
+ return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ cancel_work_sync(&info->play_work);
+ if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+ struct vibra_info *info;
+ int error;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!info->regmap) {
+ dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+ return -ENODEV;
+ }
+
+ error = device_property_read_u32(&pdev->dev, "reg", &info->base);
+ if (error) {
+ dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+ return error;
+ }
+
+ info->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!info->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ info->input_dev->name = "sc27xx:vibrator";
+ info->input_dev->id.version = 0;
+ info->input_dev->close = sc27xx_vibra_close;
+
+ input_set_drvdata(info->input_dev, info);
+ input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+ INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+ info->enabled = false;
+
+ error = sc27xx_vibra_hw_init(info);
+ if (error) {
+ dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+ return error;
+ }
+
+ error = input_ff_create_memless(info->input_dev, NULL,
+ sc27xx_vibra_play);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+ return error;
+ }
+
+ error = input_register_device(info->input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device.\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+ { .compatible = "sprd,sc2731-vibrator", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+ .driver = {
+ .name = "sc27xx-vibrator",
+ .of_match_table = sc27xx_vibra_of_match,
+ },
+ .probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");
#define ETP_DISABLE_POWER 0x0001
#define ETP_PRESSURE_OFFSET 25
+#define ETP_CALIBRATE_MAX_LEN 3
+
/* IAP Firmware handling */
#define ETP_PRODUCT_ID_FORMAT_STRING "%d.0"
#define ETP_FW_NAME "elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin"
int tries = 20;
int retval;
int error;
- u8 val[3];
+ u8 val[ETP_CALIBRATE_MAX_LEN];
retval = mutex_lock_interruptible(&data->sysfs_mutex);
if (retval)
{ "ELAN060C", 0 },
{ "ELAN0611", 0 },
{ "ELAN0612", 0 },
+ { "ELAN0618", 0 },
{ "ELAN1000", 0 },
{ }
};
static int elan_smbus_initialize(struct i2c_client *client)
{
u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 };
- u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 };
+ u8 values[I2C_SMBUS_BLOCK_MAX] = {0};
int len, error;
/* Get hello packet */
static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val)
{
int error;
+ u8 buf[I2C_SMBUS_BLOCK_MAX] = {0};
+
+ BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf));
error = i2c_smbus_read_block_data(client,
- ETP_SMBUS_CALIBRATE_QUERY, val);
+ ETP_SMBUS_CALIBRATE_QUERY, buf);
if (error < 0)
return error;
+ memcpy(val, buf, ETP_CALIBRATE_MAX_LEN);
return 0;
}
{
int len;
+ BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN);
+
len = i2c_smbus_read_block_data(client,
ETP_SMBUS_PACKET_QUERY,
&report[ETP_SMBUS_REPORT_OFFSET]);
else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
sanity_check = ((packet[3] & 0x1c) == 0x10);
else
- sanity_check = ((packet[0] & 0x0c) == 0x04 &&
+ sanity_check = ((packet[0] & 0x08) == 0x00 &&
(packet[3] & 0x1c) == 0x10);
if (!sanity_check)
{ }
};
+static const char * const middle_button_pnp_ids[] = {
+ "LEN2131", /* ThinkPad P52 w/ NFC */
+ "LEN2132", /* ThinkPad P52 */
+ NULL
+};
+
/*
* Set the appropriate event bits for the input subsystem
*/
__clear_bit(EV_REL, dev->evbit);
__set_bit(BTN_LEFT, dev->keybit);
- if (dmi_check_system(elantech_dmi_has_middle_button))
+ if (dmi_check_system(elantech_dmi_has_middle_button) ||
+ psmouse_matches_pnp_id(psmouse, middle_button_pnp_ids))
__set_bit(BTN_MIDDLE, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
else
input_report_rel(dev, REL_WHEEL, -wheel);
- input_report_key(dev, BTN_SIDE, BIT(4));
- input_report_key(dev, BTN_EXTRA, BIT(5));
+ input_report_key(dev, BTN_SIDE, packet[3] & BIT(4));
+ input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5));
break;
}
break;
input_report_rel(dev, REL_WHEEL, -(s8) packet[3]);
/* Extra buttons on Genius NewNet 3D */
- input_report_key(dev, BTN_SIDE, BIT(6));
- input_report_key(dev, BTN_EXTRA, BIT(7));
+ input_report_key(dev, BTN_SIDE, packet[0] & BIT(6));
+ input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7));
break;
case PSMOUSE_THINKPS:
/* Extra button on ThinkingMouse */
- input_report_key(dev, BTN_EXTRA, BIT(3));
+ input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3));
/*
* Without this bit of weirdness moving up gives wildly
* Cortron PS2 Trackball reports SIDE button in the
* 4th bit of the first byte.
*/
- input_report_key(dev, BTN_SIDE, BIT(3));
+ input_report_key(dev, BTN_SIDE, packet[0] & BIT(3));
packet[0] |= BIT(3);
break;
#
config RMI4_CORE
tristate "Synaptics RMI4 bus support"
+ select IRQ_DOMAIN
help
Say Y here if you want to support the Synaptics RMI4 bus. This is
required for all RMI4 device support.
if (obj->type == RMI_2D_OBJECT_NONE)
return;
- if (axis_align->swap_axes)
- swap(obj->x, obj->y);
-
if (axis_align->flip_x)
obj->x = sensor->max_x - obj->x;
if (axis_align->flip_y)
obj->y = sensor->max_y - obj->y;
+ if (axis_align->swap_axes)
+ swap(obj->x, obj->y);
+
/*
* Here checking if X offset or y offset are specified is
* redundant. We just add the offsets or clip the values.
x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x));
y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y));
- if (axis_align->swap_axes)
- swap(x, y);
-
if (axis_align->flip_x)
x = min(RMI_2D_REL_POS_MAX, -x);
if (axis_align->flip_y)
y = min(RMI_2D_REL_POS_MAX, -y);
+ if (axis_align->swap_axes)
+ swap(x, y);
+
if (x || y) {
input_report_rel(sensor->input, REL_X, x);
input_report_rel(sensor->input, REL_Y, y);
struct input_dev *input = sensor->input;
int res_x;
int res_y;
+ int max_x, max_y;
int input_flags = 0;
if (sensor->report_abs) {
- if (sensor->axis_align.swap_axes) {
- swap(sensor->max_x, sensor->max_y);
- swap(sensor->axis_align.clip_x_low,
- sensor->axis_align.clip_y_low);
- swap(sensor->axis_align.clip_x_high,
- sensor->axis_align.clip_y_high);
- }
-
sensor->min_x = sensor->axis_align.clip_x_low;
if (sensor->axis_align.clip_x_high)
sensor->max_x = min(sensor->max_x,
sensor->axis_align.clip_y_high);
set_bit(EV_ABS, input->evbit);
- input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x,
- 0, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y,
- 0, 0);
+
+ max_x = sensor->max_x;
+ max_y = sensor->max_y;
+ if (sensor->axis_align.swap_axes)
+ swap(max_x, max_y);
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
if (sensor->x_mm && sensor->y_mm) {
res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm;
res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm;
+ if (sensor->axis_align.swap_axes)
+ swap(res_x, res_y);
input_abs_set_res(input, ABS_X, res_x);
input_abs_set_res(input, ABS_Y, res_y);
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/pm.h>
#include <linux/rmi.h>
{}
#endif
+static struct irq_chip rmi_irq_chip = {
+ .name = "rmi4",
+};
+
+static int rmi_create_function_irq(struct rmi_function *fn,
+ struct rmi_function_handler *handler)
+{
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int i, error;
+
+ for (i = 0; i < fn->num_of_irqs; i++) {
+ set_bit(fn->irq_pos + i, fn->irq_mask);
+
+ fn->irq[i] = irq_create_mapping(drvdata->irqdomain,
+ fn->irq_pos + i);
+
+ irq_set_chip_data(fn->irq[i], fn);
+ irq_set_chip_and_handler(fn->irq[i], &rmi_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(fn->irq[i], 1);
+
+ error = devm_request_threaded_irq(&fn->dev, fn->irq[i], NULL,
+ handler->attention, IRQF_ONESHOT,
+ dev_name(&fn->dev), fn);
+ if (error) {
+ dev_err(&fn->dev, "Error %d registering IRQ\n", error);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
static int rmi_function_probe(struct device *dev)
{
struct rmi_function *fn = to_rmi_function(dev);
if (handler->probe) {
error = handler->probe(fn);
- return error;
+ if (error)
+ return error;
+ }
+
+ if (fn->num_of_irqs && handler->attention) {
+ error = rmi_create_function_irq(fn, handler);
+ if (error)
+ return error;
}
return 0;
void rmi_unregister_function(struct rmi_function *fn)
{
+ int i;
+
rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n",
fn->fd.function_number);
device_del(&fn->dev);
of_node_put(fn->dev.of_node);
put_device(&fn->dev);
+
+ for (i = 0; i < fn->num_of_irqs; i++)
+ irq_dispose_mapping(fn->irq[i]);
+
}
/**
struct rmi_device;
+/*
+ * The interrupt source count in the function descriptor can represent up to
+ * 6 interrupt sources in the normal manner.
+ */
+#define RMI_FN_MAX_IRQS 6
+
/**
* struct rmi_function - represents the implementation of an RMI4
* function for a particular device (basically, a driver for that RMI4 function)
* @irq_pos: The position in the irq bitfield this function holds
* @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN
* interrupt handling.
+ * @irqs: assigned virq numbers (up to num_of_irqs)
*
* @node: entry in device's list of functions
*/
struct list_head node;
unsigned int num_of_irqs;
+ int irq[RMI_FN_MAX_IRQS];
unsigned int irq_pos;
unsigned long irq_mask[];
};
void (*remove)(struct rmi_function *fn);
int (*config)(struct rmi_function *fn);
int (*reset)(struct rmi_function *fn);
- int (*attention)(struct rmi_function *fn, unsigned long *irq_bits);
+ irqreturn_t (*attention)(int irq, void *ctx);
int (*suspend)(struct rmi_function *fn);
int (*resume)(struct rmi_function *fn);
};
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/irqdomain.h>
#include <uapi/linux/input.h>
#include <linux/rmi.h>
#include "rmi_bus.h"
return 0;
}
-static void process_one_interrupt(struct rmi_driver_data *data,
- struct rmi_function *fn)
-{
- struct rmi_function_handler *fh;
-
- if (!fn || !fn->dev.driver)
- return;
-
- fh = to_rmi_function_handler(fn->dev.driver);
- if (fh->attention) {
- bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
- data->irq_count);
- if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
- fh->attention(fn, data->fn_irq_bits);
- }
-}
-
static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
{
struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
struct device *dev = &rmi_dev->dev;
- struct rmi_function *entry;
+ int i;
int error;
if (!data)
*/
mutex_unlock(&data->irq_mutex);
- /*
- * It would be nice to be able to use irq_chip to handle these
- * nested IRQs. Unfortunately, most of the current customers for
- * this driver are using older kernels (3.0.x) that don't support
- * the features required for that. Once they've shifted to more
- * recent kernels (say, 3.3 and higher), this should be switched to
- * use irq_chip.
- */
- list_for_each_entry(entry, &data->function_list, node)
- process_one_interrupt(data, entry);
+ for_each_set_bit(i, data->irq_status, data->irq_count)
+ handle_nested_irq(irq_find_mapping(data->irqdomain, i));
if (data->input)
input_sync(data->input);
static int rmi_driver_remove(struct device *dev)
{
struct rmi_device *rmi_dev = to_rmi_device(dev);
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
rmi_disable_irq(rmi_dev, false);
+ irq_domain_remove(data->irqdomain);
+ data->irqdomain = NULL;
+
rmi_f34_remove_sysfs(rmi_dev);
rmi_free_function_list(rmi_dev);
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
- int irq_count;
+ struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
+ int irq_count = 0;
size_t size;
int retval;
* being accessed.
*/
rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
- irq_count = 0;
data->bootloader_mode = false;
retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
if (data->bootloader_mode)
dev_warn(dev, "Device in bootloader mode.\n");
+ /* Allocate and register a linear revmap irq_domain */
+ data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
+ &irq_domain_simple_ops,
+ data);
+ if (!data->irqdomain) {
+ dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
data->irq_count = irq_count;
data->num_of_irq_regs = (data->irq_count + 7) / 8;
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
- int irq_count;
+ int irq_count = 0;
int retval;
- irq_count = 0;
rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
if (retval < 0) {
return 0;
}
-static int rmi_f01_attention(struct rmi_function *fn,
- unsigned long *irq_bits)
+static irqreturn_t rmi_f01_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
int error;
u8 device_status;
if (error) {
dev_err(&fn->dev,
"Failed to read device status: %d.\n", error);
- return error;
+ return IRQ_RETVAL(error);
}
if (RMI_F01_STATUS_BOOTLOADER(device_status))
error = rmi_dev->driver->reset_handler(rmi_dev);
if (error) {
dev_err(&fn->dev, "Device reset failed: %d\n", error);
- return error;
+ return IRQ_RETVAL(error);
}
}
- return 0;
+ return IRQ_HANDLED;
}
struct rmi_function_handler rmi_f01_handler = {
return 0;
}
-static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f03_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f03_data *f03 = dev_get_drvdata(&fn->dev);
/* First grab the data passed by the transport device */
if (drvdata->attn_data.size < ob_len) {
dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
- return 0;
+ return IRQ_HANDLED;
}
memcpy(obs, drvdata->attn_data.data, ob_len);
"%s: Failed to read F03 output buffers: %d\n",
__func__, error);
serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
- return error;
+ return IRQ_RETVAL(error);
}
}
serio_interrupt(f03->serio, ob_data, serio_flags);
}
- return 0;
+ return IRQ_HANDLED;
}
static void rmi_f03_remove(struct rmi_function *fn)
}
static void rmi_f11_finger_handler(struct f11_data *f11,
- struct rmi_2d_sensor *sensor,
- unsigned long *irq_bits, int num_irq_regs,
- int size)
+ struct rmi_2d_sensor *sensor, int size)
{
const u8 *f_state = f11->data.f_state;
u8 finger_state;
int rel_fingers;
int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
- int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
- num_irq_regs * 8);
- int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
- num_irq_regs * 8);
-
- if (abs_bits) {
+ if (sensor->report_abs) {
if (abs_size > size)
abs_fingers = size / RMI_F11_ABS_BYTES;
else
rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
finger_state, i);
}
- }
- if (rel_bits) {
- if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
- rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
- else
- rel_fingers = sensor->nbr_fingers;
-
- for (i = 0; i < rel_fingers; i++)
- rmi_f11_rel_pos_report(f11, i);
- }
-
- if (abs_bits) {
/*
* the absolute part is made in 2 parts to allow the kernel
* tracking to take place.
}
input_mt_sync_frame(sensor->input);
+ } else if (sensor->report_rel) {
+ if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
+ rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
+ else
+ rel_fingers = sensor->nbr_fingers;
+
+ for (i = 0; i < rel_fingers; i++)
+ rmi_f11_rel_pos_report(f11, i);
}
+
}
static int f11_2d_construct_data(struct f11_data *f11)
return 0;
}
-static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f11_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f11_data *f11 = dev_get_drvdata(&fn->dev);
data_base_addr, f11->sensor.data_pkt,
f11->sensor.pkt_size);
if (error < 0)
- return error;
+ return IRQ_RETVAL(error);
}
- rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
- drvdata->num_of_irq_regs, valid_bytes);
+ rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes);
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f11_resume(struct rmi_function *fn)
rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
}
-static int rmi_f12_attention(struct rmi_function *fn,
- unsigned long *irq_nr_regs)
+static irqreturn_t rmi_f12_attention(int irq, void *ctx)
{
int retval;
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f12_data *f12 = dev_get_drvdata(&fn->dev);
if (retval < 0) {
dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
retval);
- return retval;
+ return IRQ_RETVAL(retval);
}
}
input_mt_sync_frame(sensor->input);
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f12_write_control_regs(struct rmi_function *fn)
}
}
-static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f30_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
int error;
if (drvdata->attn_data.size < f30->register_count) {
dev_warn(&fn->dev,
"F30 interrupted, but data is missing\n");
- return 0;
+ return IRQ_HANDLED;
}
memcpy(f30->data_regs, drvdata->attn_data.data,
f30->register_count);
dev_err(&fn->dev,
"%s: Failed to read F30 data registers: %d\n",
__func__, error);
- return error;
+ return IRQ_RETVAL(error);
}
}
rmi_f03_commit_buttons(f30->f03);
}
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f30_config(struct rmi_function *fn)
return 0;
}
-static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f34_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct f34_data *f34 = dev_get_drvdata(&fn->dev);
int ret;
u8 status;
complete(&f34->v7.cmd_done);
}
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
mutex_unlock(&f54->data_mutex);
}
-static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits)
-{
- return 0;
-}
-
static int rmi_f54_config(struct rmi_function *fn)
{
struct rmi_driver *drv = fn->rmi_dev->driver;
.func = 0x54,
.probe = rmi_f54_probe,
.config = rmi_f54_config,
- .attention = rmi_f54_attention,
.remove = rmi_f54_remove,
};
{ "GSL3692", 0 },
{ "MSSL1680", 0 },
{ "MSSL0001", 0 },
+ { "MSSL0002", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match);
.getname = data_sock_getname,
.sendmsg = mISDN_sock_sendmsg,
.recvmsg = mISDN_sock_recvmsg,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = data_sock_setsockopt,
}
/* Return md raid10 algorithm for @name */
-static const int raid10_name_to_format(const char *name)
+static int raid10_name_to_format(const char *name)
{
if (!strcasecmp(name, "near"))
return ALGORITHM_RAID10_NEAR;
static int device_supports_dax(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
- struct request_queue *q = bdev_get_queue(dev->bdev);
-
- return q && blk_queue_dax(q);
+ return bdev_dax_supported(dev->bdev, PAGE_SIZE);
}
static bool dm_table_supports_dax(struct dm_table *t)
if (dm_table_supports_dax(t))
blk_queue_flag_set(QUEUE_FLAG_DAX, q);
+ else
+ blk_queue_flag_clear(QUEUE_FLAG_DAX, q);
+
if (dm_table_supports_dax_write_cache(t))
dax_write_cache(t->md->dax_dev, true);
static int __commit_transaction(struct dm_pool_metadata *pmd)
{
int r;
- size_t metadata_len, data_len;
struct thin_disk_superblock *disk_super;
struct dm_block *sblock;
if (r < 0)
return r;
- r = dm_sm_root_size(pmd->metadata_sm, &metadata_len);
- if (r < 0)
- return r;
-
- r = dm_sm_root_size(pmd->data_sm, &data_len);
- if (r < 0)
- return r;
-
r = save_sm_roots(pmd);
if (r < 0)
return r;
static void set_pool_mode(struct pool *pool, enum pool_mode new_mode);
+static void requeue_bios(struct pool *pool);
+
static void check_for_space(struct pool *pool)
{
int r;
if (r)
return;
- if (nr_free)
+ if (nr_free) {
set_pool_mode(pool, PM_WRITE);
+ requeue_bios(pool);
+ }
}
/*
r = dm_pool_alloc_data_block(pool->pmd, result);
if (r) {
- metadata_operation_failed(pool, "dm_pool_alloc_data_block", r);
+ if (r == -ENOSPC)
+ set_pool_mode(pool, PM_OUT_OF_DATA_SPACE);
+ else
+ metadata_operation_failed(pool, "dm_pool_alloc_data_block", r);
return r;
}
if (da != p) {
long i;
wc->memory_map = NULL;
- pages = kvmalloc(p * sizeof(struct page *), GFP_KERNEL);
+ pages = kvmalloc_array(p, sizeof(struct page *), GFP_KERNEL);
if (!pages) {
r = -ENOMEM;
goto err2;
if (wc->entries)
return 0;
- wc->entries = vmalloc(sizeof(struct wc_entry) * wc->n_blocks);
+ wc->entries = vmalloc(array_size(sizeof(struct wc_entry), wc->n_blocks));
if (!wc->entries)
return -ENOMEM;
for (b = 0; b < wc->n_blocks; b++) {
wb->bio.bi_iter.bi_sector = read_original_sector(wc, e);
wb->page_offset = PAGE_SIZE;
if (max_pages <= WB_LIST_INLINE ||
- unlikely(!(wb->wc_list = kmalloc(max_pages * sizeof(struct wc_entry *),
- GFP_NOIO | __GFP_NORETRY |
- __GFP_NOMEMALLOC | __GFP_NOWARN)))) {
+ unlikely(!(wb->wc_list = kmalloc_array(max_pages, sizeof(struct wc_entry *),
+ GFP_NOIO | __GFP_NORETRY |
+ __GFP_NOMEMALLOC | __GFP_NOWARN)))) {
wb->wc_list = wb->wc_list_inline;
max_pages = WB_LIST_INLINE;
}
/* Chunk BIO work */
mutex_init(&dmz->chunk_lock);
- INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_KERNEL);
+ INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_NOIO);
dmz->chunk_wq = alloc_workqueue("dmz_cwq_%s", WQ_MEM_RECLAIM | WQ_UNBOUND,
0, dev->name);
if (!dmz->chunk_wq) {
if (len < 1)
goto out;
nr_pages = min(len, nr_pages);
- if (ti->type->direct_access)
- ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn);
+ ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn);
out:
dm_put_live_table(md, srcu_idx);
* the usage of io->orig_bio in dm_remap_zone_report()
* won't be affected by this reassignment.
*/
- struct bio *b = bio_clone_bioset(bio, GFP_NOIO,
- &md->queue->bio_split);
+ struct bio *b = bio_split(bio, bio_sectors(bio) - ci.sector_count,
+ GFP_NOIO, &md->queue->bio_split);
ci.io->orig_bio = b;
- bio_advance(bio, (bio_sectors(bio) - ci.sector_count) << 9);
bio_chain(b, bio);
ret = generic_make_request(bio);
break;
struct ppb_lock {
struct flchip *chip;
- loff_t offset;
+ unsigned long adr;
int locked;
};
unsigned long timeo;
int ret;
+ adr += chip->start;
mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
+ ret = get_chip(map, chip, adr, FL_LOCKING);
if (ret) {
mutex_unlock(&chip->mutex);
return ret;
if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) {
chip->state = FL_LOCKING;
- map_write(map, CMD(0xA0), chip->start + adr);
- map_write(map, CMD(0x00), chip->start + adr);
+ map_write(map, CMD(0xA0), adr);
+ map_write(map, CMD(0x00), adr);
} else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) {
/*
* Unlocking of one specific sector is not supported, so we
map_write(map, CMD(0x00), chip->start);
chip->state = FL_READY;
- put_chip(map, chip, adr + chip->start);
+ put_chip(map, chip, adr);
mutex_unlock(&chip->mutex);
return ret;
* sectors shall be unlocked, so lets keep their locking
* status at "unlocked" (locked=0) for the final re-locking.
*/
- if ((adr < ofs) || (adr >= (ofs + len))) {
+ if ((offset < ofs) || (offset >= (ofs + len))) {
sect[sectors].chip = &cfi->chips[chipnum];
- sect[sectors].offset = offset;
+ sect[sectors].adr = adr;
sect[sectors].locked = do_ppb_xxlock(
map, &cfi->chips[chipnum], adr, 0,
DO_XXLOCK_ONEBLOCK_GETLOCK);
i++;
if (adr >> cfi->chipshift) {
+ if (offset >= (ofs + len))
+ break;
adr = 0;
chipnum++;
*/
for (i = 0; i < sectors; i++) {
if (sect[i].locked)
- do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0,
+ do_ppb_xxlock(map, sect[i].chip, sect[i].adr, 0,
DO_XXLOCK_ONEBLOCK_LOCK);
}
{ "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
{ "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
- { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS},
- { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS},
+ { "AT45DB641E", 0x1f28000100ULL, 32768, 264, 9, SUP_EXTID | SUP_POW2PS},
+ { "at45db641e", 0x1f28000100ULL, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS},
};
static struct flash_info *jedec_lookup(struct spi_device *spi,
if (ret)
return ret;
- denali->clk_x_rate = clk_get_rate(dt->clk);
+ /*
+ * Hardcode the clock rate for the backward compatibility.
+ * This works for both SOCFPGA and UniPhier.
+ */
+ denali->clk_x_rate = 200000000;
ret = denali_init(denali);
if (ret)
#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
-#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10)
#define NFC_V1_V2_WRPROT (host->regs + 0x12)
#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
writew(config1, NFC_V1_V2_CONFIG1);
/* preset operation */
+ /* spare area size in 16-bit half-words */
+ writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA);
+
/* Unlock the internal RAM Buffer */
writew(0x2, NFC_V1_V2_CONFIG);
for (; page < page_end; page++) {
res = chip->ecc.read_oob(mtd, chip, page);
- if (res)
+ if (res < 0)
return res;
bad = chip->oob_poi[chip->badblockpos];
#include <linux/mtd/rawnand.h>
+/*
+ * Macronix AC series does not support using SET/GET_FEATURES to change
+ * the timings unlike what is declared in the parameter page. Unflag
+ * this feature to avoid unnecessary downturns.
+ */
+static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip)
+{
+ unsigned int i;
+ static const char * const broken_get_timings[] = {
+ "MX30LF1G18AC",
+ "MX30LF1G28AC",
+ "MX30LF2G18AC",
+ "MX30LF2G28AC",
+ "MX30LF4G18AC",
+ "MX30LF4G28AC",
+ "MX60LF8G18AC",
+ };
+
+ if (!chip->parameters.supports_set_get_features)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(broken_get_timings); i++) {
+ if (!strcmp(broken_get_timings[i], chip->parameters.model))
+ break;
+ }
+
+ if (i == ARRAY_SIZE(broken_get_timings))
+ return;
+
+ bitmap_clear(chip->parameters.get_feature_list,
+ ONFI_FEATURE_ADDR_TIMING_MODE, 1);
+ bitmap_clear(chip->parameters.set_feature_list,
+ ONFI_FEATURE_ADDR_TIMING_MODE, 1);
+}
+
static int macronix_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
- /*
- * MX30LF2G18AC chip does not support using SET/GET_FEATURES to change
- * the timings unlike what is declared in the parameter page. Unflag
- * this feature to avoid unnecessary downturns.
- */
- if (chip->parameters.supports_set_get_features &&
- !strcmp("MX30LF2G18AC", chip->parameters.model)) {
- bitmap_clear(chip->parameters.get_feature_list,
- ONFI_FEATURE_ADDR_TIMING_MODE, 1);
- bitmap_clear(chip->parameters.set_feature_list,
- ONFI_FEATURE_ADDR_TIMING_MODE, 1);
- }
+ macronix_nand_fix_broken_get_timings(chip);
return 0;
}
if (p->supports_set_get_features) {
set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->set_feature_list);
+ set_bit(ONFI_FEATURE_ON_DIE_ECC, p->set_feature_list);
set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->get_feature_list);
+ set_bit(ONFI_FEATURE_ON_DIE_ECC, p->get_feature_list);
}
return 0;
config AMD_XGBE
tristate "AMD 10GbE Ethernet driver"
- depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM && HAS_DMA
+ depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
depends on X86 || ARM64 || COMPILE_TEST
select BITREVERSE
select CRC32
config NET_XGENE_V2
tristate "APM X-Gene SoC Ethernet-v2 Driver"
- depends on HAS_DMA
depends on ARCH_XGENE || COMPILE_TEST
help
This is the Ethernet driver for the on-chip ethernet interface
config NET_XGENE
tristate "APM X-Gene SoC Ethernet Driver"
- depends on HAS_DMA
depends on ARCH_XGENE || COMPILE_TEST
select PHYLIB
select MDIO_XGENE
config ARC_EMAC
tristate "ARC EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ && OF_NET && HAS_DMA && (ARC || COMPILE_TEST)
+ depends on OF_IRQ && OF_NET
+ depends on ARC || COMPILE_TEST
---help---
On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
non-standard on-chip ethernet device ARC EMAC 10/100 is used.
config EMAC_ROCKCHIP
tristate "Rockchip EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA && (ARCH_ROCKCHIP || COMPILE_TEST)
+ depends on OF_IRQ && OF_NET && REGULATOR
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
---help---
Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
config BGMAC_BCMA
tristate "Broadcom iProc GBit BCMA support"
depends on BCMA && BCMA_HOST_SOC
- depends on HAS_DMA
depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
select BGMAC
select PHYLIB
config BGMAC_PLATFORM
tristate "Broadcom iProc GBit platform support"
- depends on HAS_DMA
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on OF
select BGMAC
if (delta > TSU_NSEC_MAX_VAL) {
gem_tsu_get_time(&bp->ptp_clock_info, &now);
- if (sign)
- now = timespec64_sub(now, then);
- else
- now = timespec64_add(now, then);
+ now = timespec64_add(now, then);
gem_tsu_set_time(&bp->ptp_clock_info,
(const struct timespec64 *)&now);
config NET_CALXEDA_XGMAC
tristate "Calxeda 1G/10G XGMAC Ethernet driver"
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
depends on ARCH_HIGHBANK || COMPILE_TEST
select CRC32
help
"Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
enable ? "set" : "unset", pi->port_id, i, -err);
else
- txq->dcb_prio = value;
+ txq->dcb_prio = enable ? value : 0;
}
}
config NET_VENDOR_HISILICON
bool "Hisilicon devices"
default y
- depends on (OF || ACPI) && HAS_DMA
+ depends on OF || ACPI
depends on ARM || ARM64 || COMPILE_TEST
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET
- depends on HAS_DMA
+ depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
+ depends on INET
select PHYLIB
select MVMDIO
---help---
config MVNETA
tristate "Marvell Armada 370/38x/XP/37xx network interface support"
depends on ARCH_MVEBU || COMPILE_TEST
- depends on HAS_DMA
select MVMDIO
select PHYLINK
---help---
config MVPP2
tristate "Marvell Armada 375/7K/8K network interface support"
depends on ARCH_MVEBU || COMPILE_TEST
- depends on HAS_DMA
select MVMDIO
select PHYLINK
---help---
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
select PHYLIB
---help---
rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
index = rx_desc - rxq->descs;
data = rxq->buf_virt_addr[index];
- phys_addr = rx_desc->buf_phys_addr;
+ phys_addr = rx_desc->buf_phys_addr - pp->rx_offset_correction;
if (!mvneta_rxq_desc_is_first_last(rx_status) ||
(rx_status & MVNETA_RXD_ERR_SUMMARY)) {
config MLXSW_PCI
tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
- depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE
+ depends on PCI && HAS_IOMEM && MLXSW_CORE
default m
---help---
This is PCI bus implementation for Mellanox Technologies Switch ASICs.
static int ocelot_gen_ifh(u32 *ifh, struct frame_info *info)
{
ifh[0] = IFH_INJ_BYPASS;
- ifh[1] = (0xff00 & info->port) >> 8;
+ ifh[1] = (0xf00 & info->port) >> 8;
ifh[2] = (0xff & info->port) << 24;
- ifh[3] = IFH_INJ_POP_CNT_DISABLE | (info->cpuq << 20) |
- (info->tag_type << 16) | info->vid;
+ ifh[3] = (info->tag_type << 16) | info->vid;
return 0;
}
QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
info.port = BIT(port->chip_port);
- info.cpuq = 0xff;
+ info.tag_type = IFH_TAG_TYPE_C;
+ info.vid = skb_vlan_tag_get(skb);
ocelot_gen_ifh(ifh, &info);
for (i = 0; i < IFH_LEN; i++)
- ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp);
+ ocelot_write_rix(ocelot, (__force u32)cpu_to_be32(ifh[i]),
+ QS_INJ_WR, grp);
count = (skb->len + 3) / 4;
last = skb->len % 4;
{
struct rtl8169_private *tp = netdev_priv(dev);
- rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), dev);
+ rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), tp);
}
#endif
config SH_ETH
tristate "Renesas SuperH Ethernet support"
- depends on HAS_DMA
depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
select CRC32
select MII
config RAVB
tristate "Renesas Ethernet AVB support"
- depends on HAS_DMA
depends on ARCH_RENESAS || COMPILE_TEST
select CRC32
select MII
return true;
}
+static
struct hlist_head *efx_rps_hash_bucket(struct efx_nic *efx,
const struct efx_filter_spec *spec)
{
* devices (e.g. cpsw switches) use plain old memory. Descriptor pools
* abstract out these details
*/
-int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr)
+static int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr)
{
struct cpdma_params *cpdma_params = &ctlr->params;
struct cpdma_desc_pool *pool;
static int match_first_device(struct device *dev, void *data)
{
+ if (dev->parent && dev->parent->of_node)
+ return of_device_is_compatible(dev->parent->of_node,
+ "ti,davinci_mdio");
+
return !strncmp(dev_name(dev), "davinci_mdio", 12);
}
ipvlan->phy_dev = phy_dev;
ipvlan->dev = dev;
ipvlan->sfeatures = IPVLAN_FEATURES;
- ipvlan_adjust_mtu(ipvlan, phy_dev);
+ if (!tb[IFLA_MTU])
+ ipvlan_adjust_mtu(ipvlan, phy_dev);
INIT_LIST_HEAD(&ipvlan->addrs);
spin_lock_init(&ipvlan->addrs_lock);
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = pppoe_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = sock_no_setsockopt,
{QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
{QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */
{QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */
+ {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e */
{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */
{QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
bool "PCIE bus interface support for FullMAC driver"
depends on BRCMFMAC
depends on PCI
- depends on HAS_DMA
select BRCMFMAC_PROTO_MSGBUF
select FW_LOADER
---help---
config QTNFMAC_PEARL_PCIE
tristate "Quantenna QSR10g PCIe support"
default n
- depends on HAS_DMA && PCI && CFG80211
+ depends on PCI && CFG80211
select QTNFMAC
select FW_LOADER
select CRC32
err = xen_net_read_mac(dev, info->netdev->dev_addr);
if (err) {
xenbus_dev_fatal(dev, err, "parsing %s/mac", dev->nodename);
- goto out;
+ goto out_unlocked;
}
rtnl_lock();
xennet_destroy_queues(info);
out:
rtnl_unlock();
+out_unlocked:
device_unregister(&dev->dev);
return err;
}
/* talk_to_netback() sets the correct number of queues */
num_queues = dev->real_num_tx_queues;
- rtnl_lock();
- netdev_update_features(dev);
- rtnl_unlock();
-
if (dev->reg_state == NETREG_UNINITIALIZED) {
err = register_netdev(dev);
if (err) {
}
}
+ rtnl_lock();
+ netdev_update_features(dev);
+ rtnl_unlock();
+
/*
* All public and private state should now be sane. Get
* ready to start sending and receiving packets and give the driver
blk_queue_logical_block_size(q, pmem_sector_size(ndns));
blk_queue_max_hw_sectors(q, UINT_MAX);
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
- blk_queue_flag_set(QUEUE_FLAG_DAX, q);
+ if (pmem->pfn_flags & PFN_MAP)
+ blk_queue_flag_set(QUEUE_FLAG_DAX, q);
q->queuedata = pmem;
disk = alloc_disk_node(0, nid);
blk_cleanup_queue(ctrl->ctrl.admin_q);
nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.admin_tagset);
}
- nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe,
- sizeof(struct nvme_command), DMA_TO_DEVICE);
+ if (ctrl->async_event_sqe.data) {
+ nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe,
+ sizeof(struct nvme_command), DMA_TO_DEVICE);
+ ctrl->async_event_sqe.data = NULL;
+ }
nvme_rdma_free_queue(&ctrl->queues[0]);
}
obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
-obj-y += controller/
-obj-y += switch/
-
# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+obj-y += controller/
+obj-y += switch/
+
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
depends on OF
select PCI_HOST_COMMON
select IRQ_DOMAIN
- select PCI_DOMAINS
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
config PCIE_IPROC
tristate
- select PCI_DOMAINS
help
This enables the iProc PCIe core controller support for Broadcom's
iProc family of SoCs. An appropriate bus interface driver needs
config PCIE_ALTERA
bool "Altera PCIe controller"
depends on ARM || NIOS2 || COMPILE_TEST
- select PCI_DOMAINS
help
Say Y here if you want to enable PCIe controller support on Altera
FPGA.
* All rights reserved.
*
* Send feedback to <kristen.c.accardi@intel.com>
- *
*/
#include <linux/module.h>
return 0;
/* If _OSC exists, we should not evaluate OSHP */
+
+ /*
+ * If there's no ACPI host bridge (i.e., ACPI support is compiled
+ * into the kernel but the hardware platform doesn't support ACPI),
+ * there's nothing to do here.
+ */
host = pci_find_host_bridge(pdev->bus);
root = acpi_pci_find_root(ACPI_HANDLE(&host->dev));
+ if (!root)
+ return 0;
+
if (root->osc_support_set)
goto no_control;
case PMU_TYPE_IOB:
return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id);
case PMU_TYPE_IOB_SLOW:
- return devm_kasprintf(dev, GFP_KERNEL, "iob-slow%d", id);
+ return devm_kasprintf(dev, GFP_KERNEL, "iob_slow%d", id);
case PMU_TYPE_MCB:
return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id);
case PMU_TYPE_MC:
ioa_cfg->hrrq[i].allow_interrupts = 0;
spin_unlock(&ioa_cfg->hrrq[i]._lock);
}
- wmb();
/* Set interrupt mask to stop all new interrupts */
if (ioa_cfg->sis64)
ioa_cfg->hrrq[i].allow_interrupts = 1;
spin_unlock(&ioa_cfg->hrrq[i]._lock);
}
- wmb();
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
void qlt_schedule_sess_for_deletion(struct fc_port *sess)
{
struct qla_tgt *tgt = sess->tgt;
- struct qla_hw_data *ha = sess->vha->hw;
unsigned long flags;
if (sess->disc_state == DSC_DELETE_PEND)
return;
}
- spin_lock_irqsave(&ha->tgt.sess_lock, flags);
if (sess->deleted == QLA_SESS_DELETED)
sess->logout_on_delete = 0;
+ spin_lock_irqsave(&sess->vha->work_lock, flags);
if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) {
- spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+ spin_unlock_irqrestore(&sess->vha->work_lock, flags);
return;
}
sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
- spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+ spin_unlock_irqrestore(&sess->vha->work_lock, flags);
sess->disc_state = DSC_DELETE_PEND;
int k = sdebug_add_host;
stop_all_queued();
- free_all_queued();
for (; k; k--)
sdebug_remove_adapter();
+ free_all_queued();
driver_unregister(&sdebug_driverfs_driver);
bus_unregister(&pseudo_lld_bus);
root_device_unregister(pseudo_primary);
#define GPC_M4_PU_PDN_FLG 0x1bc
-
-#define PGC_MIPI 4
-#define PGC_PCIE 5
-#define PGC_USB_HSIC 8
+/*
+ * The PGC offset values in Reference Manual
+ * (Rev. 1, 01/2018 and the older ones) GPC chapter's
+ * GPC_PGC memory map are incorrect, below offset
+ * values are from design RTL.
+ */
+#define PGC_MIPI 16
+#define PGC_PCIE 17
+#define PGC_USB_HSIC 20
#define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40)
#define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc)
config QCOM_COMMAND_DB
bool "Qualcomm Command DB"
- depends on (ARCH_QCOM && OF) || COMPILE_TEST
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on OF_RESERVED_MEM
help
Command DB queries shared memory by key string for shared system
resources. Platform drivers that require to set state of a shared
static bool has_cpg_mstp;
-static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
+static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
{
struct generic_pm_domain *genpd = &pd->genpd;
const char *name = pd->genpd.name;
struct dev_power_governor *gov = &simple_qos_governor;
+ int error;
if (pd->flags & PD_CPU) {
/*
rcar_sysc_power_up(&pd->ch);
finalize:
- pm_genpd_init(genpd, gov, false);
+ error = pm_genpd_init(genpd, gov, false);
+ if (error)
+ pr_err("Failed to init PM domain %s: %d\n", name, error);
+
+ return error;
}
static const struct of_device_id rcar_sysc_matches[] __initconst = {
pr_debug("%pOF: syscier = 0x%08x\n", np, syscier);
iowrite32(syscier, base + SYSCIER);
+ /*
+ * First, create all PM domains
+ */
for (i = 0; i < info->num_areas; i++) {
const struct rcar_sysc_area *area = &info->areas[i];
struct rcar_sysc_pd *pd;
pd->ch.isr_bit = area->isr_bit;
pd->flags = area->flags;
- rcar_sysc_pd_setup(pd);
- if (area->parent >= 0)
- pm_genpd_add_subdomain(domains->domains[area->parent],
- &pd->genpd);
+ error = rcar_sysc_pd_setup(pd);
+ if (error)
+ goto out_put;
domains->domains[area->isr_bit] = &pd->genpd;
}
+ /*
+ * Second, link all PM domains to their parents
+ */
+ for (i = 0; i < info->num_areas; i++) {
+ const struct rcar_sysc_area *area = &info->areas[i];
+
+ if (!area->name || area->parent < 0)
+ continue;
+
+ error = pm_genpd_add_subdomain(domains->domains[area->parent],
+ domains->domains[area->isr_bit]);
+ if (error)
+ pr_warn("Failed to add PM subdomain %s to parent %u\n",
+ area->name, area->parent);
+ }
+
error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
out_put:
}
static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
- bool bidi)
+ bool bidi, uint32_t read_len)
{
struct se_cmd *se_cmd = cmd->se_cmd;
int i, dbi;
for_each_sg(data_sg, sg, data_nents, i) {
int sg_remaining = sg->length;
to = kmap_atomic(sg_page(sg)) + sg->offset;
- while (sg_remaining > 0) {
+ while (sg_remaining > 0 && read_len > 0) {
if (block_remaining == 0) {
if (from)
kunmap_atomic(from);
}
copy_bytes = min_t(size_t, sg_remaining,
block_remaining);
+ if (read_len < copy_bytes)
+ copy_bytes = read_len;
offset = DATA_BLOCK_SIZE - block_remaining;
tcmu_flush_dcache_range(from, copy_bytes);
memcpy(to + sg->length - sg_remaining, from + offset,
sg_remaining -= copy_bytes;
block_remaining -= copy_bytes;
+ read_len -= copy_bytes;
}
kunmap_atomic(to - sg->offset);
+ if (read_len == 0)
+ break;
}
if (from)
kunmap_atomic(from);
{
struct se_cmd *se_cmd = cmd->se_cmd;
struct tcmu_dev *udev = cmd->tcmu_dev;
+ bool read_len_valid = false;
+ uint32_t read_len = se_cmd->data_length;
/*
* cmd has been completed already from timeout, just reclaim
pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n",
cmd->se_cmd);
entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION;
- } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
+ goto done;
+ }
+
+ if (se_cmd->data_direction == DMA_FROM_DEVICE &&
+ (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) {
+ read_len_valid = true;
+ if (entry->rsp.read_len < read_len)
+ read_len = entry->rsp.read_len;
+ }
+
+ if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer);
- } else if (se_cmd->se_cmd_flags & SCF_BIDI) {
+ if (!read_len_valid )
+ goto done;
+ else
+ se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL;
+ }
+ if (se_cmd->se_cmd_flags & SCF_BIDI) {
/* Get Data-In buffer before clean up */
- gather_data_area(udev, cmd, true);
+ gather_data_area(udev, cmd, true, read_len);
} else if (se_cmd->data_direction == DMA_FROM_DEVICE) {
- gather_data_area(udev, cmd, false);
+ gather_data_area(udev, cmd, false, read_len);
} else if (se_cmd->data_direction == DMA_TO_DEVICE) {
/* TODO: */
} else if (se_cmd->data_direction != DMA_NONE) {
se_cmd->data_direction);
}
- target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
+done:
+ if (read_len_valid) {
+ pr_debug("read_len = %d\n", read_len);
+ target_complete_cmd_with_length(cmd->se_cmd,
+ entry->rsp.scsi_status, read_len);
+ } else
+ target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
out:
cmd->se_cmd = NULL;
/* Initialise the mailbox of the ring buffer */
mb = udev->mb_addr;
mb->version = TCMU_MAILBOX_VERSION;
- mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC;
+ mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN;
mb->cmdr_off = CMDR_OFF;
mb->cmdr_size = udev->cmdr_size;
if (ubufs)
vhost_net_ubuf_put_wait_and_free(ubufs);
err_ubufs:
- sockfd_put(sock);
+ if (sock)
+ sockfd_put(sock);
err_vq:
mutex_unlock(&vq->mutex);
err:
* Implements an efficient asynchronous io interface.
*
* Copyright 2000, 2001, 2002 Red Hat, Inc. All Rights Reserved.
- * Copyright 2018 Christoph Hellwig.
*
* See ../COPYING for licensing terms.
*/
bool datasync;
};
-struct poll_iocb {
- struct file *file;
- __poll_t events;
- struct wait_queue_head *head;
-
- union {
- struct wait_queue_entry wait;
- struct work_struct work;
- };
-};
-
struct aio_kiocb {
union {
struct kiocb rw;
struct fsync_iocb fsync;
- struct poll_iocb poll;
};
struct kioctx *ki_ctx;
if (unlikely(iocb->aio_buf || iocb->aio_offset || iocb->aio_nbytes ||
iocb->aio_rw_flags))
return -EINVAL;
+
req->file = fget(iocb->aio_fildes);
if (unlikely(!req->file))
return -EBADF;
return 0;
}
-/* need to use list_del_init so we can check if item was present */
-static inline bool __aio_poll_remove(struct poll_iocb *req)
-{
- if (list_empty(&req->wait.entry))
- return false;
- list_del_init(&req->wait.entry);
- return true;
-}
-
-static inline void __aio_poll_complete(struct aio_kiocb *iocb, __poll_t mask)
-{
- fput(iocb->poll.file);
- aio_complete(iocb, mangle_poll(mask), 0);
-}
-
-static void aio_poll_work(struct work_struct *work)
-{
- struct aio_kiocb *iocb = container_of(work, struct aio_kiocb, poll.work);
-
- if (!list_empty_careful(&iocb->ki_list))
- aio_remove_iocb(iocb);
- __aio_poll_complete(iocb, iocb->poll.events);
-}
-
-static int aio_poll_cancel(struct kiocb *iocb)
-{
- struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw);
- struct poll_iocb *req = &aiocb->poll;
- struct wait_queue_head *head = req->head;
- bool found = false;
-
- spin_lock(&head->lock);
- found = __aio_poll_remove(req);
- spin_unlock(&head->lock);
-
- if (found) {
- req->events = 0;
- INIT_WORK(&req->work, aio_poll_work);
- schedule_work(&req->work);
- }
- return 0;
-}
-
-static int aio_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync,
- void *key)
-{
- struct poll_iocb *req = container_of(wait, struct poll_iocb, wait);
- struct aio_kiocb *iocb = container_of(req, struct aio_kiocb, poll);
- struct file *file = req->file;
- __poll_t mask = key_to_poll(key);
-
- assert_spin_locked(&req->head->lock);
-
- /* for instances that support it check for an event match first: */
- if (mask && !(mask & req->events))
- return 0;
-
- mask = file->f_op->poll_mask(file, req->events) & req->events;
- if (!mask)
- return 0;
-
- __aio_poll_remove(req);
-
- /*
- * Try completing without a context switch if we can acquire ctx_lock
- * without spinning. Otherwise we need to defer to a workqueue to
- * avoid a deadlock due to the lock order.
- */
- if (spin_trylock(&iocb->ki_ctx->ctx_lock)) {
- list_del_init(&iocb->ki_list);
- spin_unlock(&iocb->ki_ctx->ctx_lock);
-
- __aio_poll_complete(iocb, mask);
- } else {
- req->events = mask;
- INIT_WORK(&req->work, aio_poll_work);
- schedule_work(&req->work);
- }
-
- return 1;
-}
-
-static ssize_t aio_poll(struct aio_kiocb *aiocb, struct iocb *iocb)
-{
- struct kioctx *ctx = aiocb->ki_ctx;
- struct poll_iocb *req = &aiocb->poll;
- __poll_t mask;
-
- /* reject any unknown events outside the normal event mask. */
- if ((u16)iocb->aio_buf != iocb->aio_buf)
- return -EINVAL;
- /* reject fields that are not defined for poll */
- if (iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags)
- return -EINVAL;
-
- req->events = demangle_poll(iocb->aio_buf) | EPOLLERR | EPOLLHUP;
- req->file = fget(iocb->aio_fildes);
- if (unlikely(!req->file))
- return -EBADF;
- if (!file_has_poll_mask(req->file))
- goto out_fail;
-
- req->head = req->file->f_op->get_poll_head(req->file, req->events);
- if (!req->head)
- goto out_fail;
- if (IS_ERR(req->head)) {
- mask = EPOLLERR;
- goto done;
- }
-
- init_waitqueue_func_entry(&req->wait, aio_poll_wake);
- aiocb->ki_cancel = aio_poll_cancel;
-
- spin_lock_irq(&ctx->ctx_lock);
- spin_lock(&req->head->lock);
- mask = req->file->f_op->poll_mask(req->file, req->events) & req->events;
- if (!mask) {
- __add_wait_queue(req->head, &req->wait);
- list_add_tail(&aiocb->ki_list, &ctx->active_reqs);
- }
- spin_unlock(&req->head->lock);
- spin_unlock_irq(&ctx->ctx_lock);
-done:
- if (mask)
- __aio_poll_complete(aiocb, mask);
- return 0;
-out_fail:
- fput(req->file);
- return -EINVAL; /* same as no support for IOCB_CMD_POLL */
-}
-
static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
bool compat)
{
case IOCB_CMD_FDSYNC:
ret = aio_fsync(&req->fsync, &iocb, true);
break;
- case IOCB_CMD_POLL:
- ret = aio_poll(req, &iocb);
- break;
default:
pr_debug("invalid aio operation %d\n", iocb.aio_lio_opcode);
ret = -EINVAL;
offset_in_extent = em_start - em->start;
em_end = extent_map_end(em);
em_len = em_end - em_start;
- disko = em->block_start + offset_in_extent;
flags = 0;
+ if (em->block_start < EXTENT_MAP_LAST_BYTE)
+ disko = em->block_start + offset_in_extent;
+ else
+ disko = 0;
/*
* bump off for our next call to get_extent
u64 new_idx = 0;
u64 root_objectid;
int ret;
+ int ret2;
bool root_log_pinned = false;
bool dest_log_pinned = false;
dest_log_pinned = false;
}
}
- ret = btrfs_end_transaction(trans);
+ ret2 = btrfs_end_transaction(trans);
+ ret = ret ? ret : ret2;
out_notrans:
if (new_ino == BTRFS_FIRST_FREE_OBJECTID)
up_read(&fs_info->subvol_sem);
ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN,
dst, dst_loff, &cmp);
if (ret)
- goto out_unlock;
+ goto out_free;
loff += BTRFS_MAX_DEDUPE_LEN;
dst_loff += BTRFS_MAX_DEDUPE_LEN;
ret = btrfs_extent_same_range(src, loff, tail_len, dst,
dst_loff, &cmp);
+out_free:
+ kvfree(cmp.src_pages);
+ kvfree(cmp.dst_pages);
+
out_unlock:
if (same_inode)
inode_unlock(src);
else
btrfs_double_inode_unlock(src, dst);
-out_free:
- kvfree(cmp.src_pages);
- kvfree(cmp.dst_pages);
-
return ret;
}
if (IS_ERR(realdn)) {
pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n",
PTR_ERR(realdn), dn, in, ceph_vinop(in));
+ dput(dn);
dn = realdn; /* note realdn contains the error */
goto out;
} else if (realdn) {
return 0;
}
-static struct wait_queue_head *
-eventfd_get_poll_head(struct file *file, __poll_t events)
-{
- struct eventfd_ctx *ctx = file->private_data;
-
- return &ctx->wqh;
-}
-
-static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask)
+static __poll_t eventfd_poll(struct file *file, poll_table *wait)
{
struct eventfd_ctx *ctx = file->private_data;
__poll_t events = 0;
u64 count;
+ poll_wait(file, &ctx->wqh, wait);
+
/*
* All writes to ctx->count occur within ctx->wqh.lock. This read
* can be done outside ctx->wqh.lock because we know that poll_wait
count = READ_ONCE(ctx->count);
if (count > 0)
- events |= (EPOLLIN & eventmask);
+ events |= EPOLLIN;
if (count == ULLONG_MAX)
events |= EPOLLERR;
if (ULLONG_MAX - 1 > count)
- events |= (EPOLLOUT & eventmask);
+ events |= EPOLLOUT;
return events;
}
.show_fdinfo = eventfd_show_fdinfo,
#endif
.release = eventfd_release,
- .get_poll_head = eventfd_get_poll_head,
- .poll_mask = eventfd_poll_mask,
+ .poll = eventfd_poll,
.read = eventfd_read,
.write = eventfd_write,
.llseek = noop_llseek,
return 0;
}
-static struct wait_queue_head *ep_eventpoll_get_poll_head(struct file *file,
- __poll_t eventmask)
-{
- struct eventpoll *ep = file->private_data;
- return &ep->poll_wait;
-}
-
-static __poll_t ep_eventpoll_poll_mask(struct file *file, __poll_t eventmask)
+static __poll_t ep_eventpoll_poll(struct file *file, poll_table *wait)
{
struct eventpoll *ep = file->private_data;
int depth = 0;
+ /* Insert inside our poll wait queue */
+ poll_wait(file, &ep->poll_wait, wait);
+
/*
* Proceed to find out if wanted events are really available inside
* the ready list.
.show_fdinfo = ep_show_fdinfo,
#endif
.release = ep_eventpoll_release,
- .get_poll_head = ep_eventpoll_get_poll_head,
- .poll_mask = ep_eventpoll_poll_mask,
+ .poll = ep_eventpoll_poll,
.llseek = noop_llseek,
};
}
}
-static struct wait_queue_head *
-pipe_get_poll_head(struct file *filp, __poll_t events)
-{
- struct pipe_inode_info *pipe = filp->private_data;
-
- return &pipe->wait;
-}
-
/* No kernel lock held - fine */
-static __poll_t pipe_poll_mask(struct file *filp, __poll_t events)
+static __poll_t
+pipe_poll(struct file *filp, poll_table *wait)
{
+ __poll_t mask;
struct pipe_inode_info *pipe = filp->private_data;
- int nrbufs = pipe->nrbufs;
- __poll_t mask = 0;
+ int nrbufs;
+
+ poll_wait(filp, &pipe->wait, wait);
/* Reading only -- no need for acquiring the semaphore. */
+ nrbufs = pipe->nrbufs;
+ mask = 0;
if (filp->f_mode & FMODE_READ) {
mask = (nrbufs > 0) ? EPOLLIN | EPOLLRDNORM : 0;
if (!pipe->writers && filp->f_version != pipe->w_counter)
.llseek = no_llseek,
.read_iter = pipe_read,
.write_iter = pipe_write,
- .get_poll_head = pipe_get_poll_head,
- .poll_mask = pipe_poll_mask,
+ .poll = pipe_poll,
.unlocked_ioctl = pipe_ioctl,
.release = pipe_release,
.fasync = pipe_fasync,
#include <linux/uaccess.h>
-__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt)
-{
- if (file->f_op->poll) {
- return file->f_op->poll(file, pt);
- } else if (file_has_poll_mask(file)) {
- unsigned int events = poll_requested_events(pt);
- struct wait_queue_head *head;
-
- if (pt && pt->_qproc) {
- head = file->f_op->get_poll_head(file, events);
- if (!head)
- return DEFAULT_POLLMASK;
- if (IS_ERR(head))
- return EPOLLERR;
- pt->_qproc(file, head, pt);
- }
-
- return file->f_op->poll_mask(file, events);
- } else {
- return DEFAULT_POLLMASK;
- }
-}
-EXPORT_SYMBOL_GPL(vfs_poll);
/*
* Estimate expected accuracy in ns from a timeval.
kfree_rcu(ctx, rcu);
return 0;
}
-
-static struct wait_queue_head *timerfd_get_poll_head(struct file *file,
- __poll_t eventmask)
+
+static __poll_t timerfd_poll(struct file *file, poll_table *wait)
{
struct timerfd_ctx *ctx = file->private_data;
+ __poll_t events = 0;
+ unsigned long flags;
- return &ctx->wqh;
-}
+ poll_wait(file, &ctx->wqh, wait);
-static __poll_t timerfd_poll_mask(struct file *file, __poll_t eventmask)
-{
- struct timerfd_ctx *ctx = file->private_data;
+ spin_lock_irqsave(&ctx->wqh.lock, flags);
+ if (ctx->ticks)
+ events |= EPOLLIN;
+ spin_unlock_irqrestore(&ctx->wqh.lock, flags);
- return ctx->ticks ? EPOLLIN : 0;
+ return events;
}
static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count,
static const struct file_operations timerfd_fops = {
.release = timerfd_release,
- .get_poll_head = timerfd_get_poll_head,
- .poll_mask = timerfd_poll_mask,
+ .poll = timerfd_poll,
.read = timerfd_read,
.llseek = noop_llseek,
.show_fdinfo = timerfd_show,
error = xfs_mod_fdblocks(pag->pag_mount, oldresv, true);
resv->ar_reserved = 0;
resv->ar_asked = 0;
+ resv->ar_orig_reserved = 0;
if (error)
trace_xfs_ag_resv_free_error(pag->pag_mount, pag->pag_agno,
struct xfs_mount *mp = pag->pag_mount;
struct xfs_ag_resv *resv;
int error;
- xfs_extlen_t reserved;
+ xfs_extlen_t hidden_space;
if (used > ask)
ask = used;
- reserved = ask - used;
- error = xfs_mod_fdblocks(mp, -(int64_t)reserved, true);
+ switch (type) {
+ case XFS_AG_RESV_RMAPBT:
+ /*
+ * Space taken by the rmapbt is not subtracted from fdblocks
+ * because the rmapbt lives in the free space. Here we must
+ * subtract the entire reservation from fdblocks so that we
+ * always have blocks available for rmapbt expansion.
+ */
+ hidden_space = ask;
+ break;
+ case XFS_AG_RESV_METADATA:
+ /*
+ * Space taken by all other metadata btrees are accounted
+ * on-disk as used space. We therefore only hide the space
+ * that is reserved but not used by the trees.
+ */
+ hidden_space = ask - used;
+ break;
+ default:
+ ASSERT(0);
+ return -EINVAL;
+ }
+ error = xfs_mod_fdblocks(mp, -(int64_t)hidden_space, true);
if (error) {
trace_xfs_ag_resv_init_error(pag->pag_mount, pag->pag_agno,
error, _RET_IP_);
resv = xfs_perag_resv(pag, type);
resv->ar_asked = ask;
- resv->ar_reserved = resv->ar_orig_reserved = reserved;
+ resv->ar_orig_reserved = hidden_space;
+ resv->ar_reserved = ask - used;
trace_xfs_ag_resv_init(pag, type, ask);
return 0;
return error;
}
+/* Make sure we won't be right-shifting an extent past the maximum bound. */
+int
+xfs_bmap_can_insert_extents(
+ struct xfs_inode *ip,
+ xfs_fileoff_t off,
+ xfs_fileoff_t shift)
+{
+ struct xfs_bmbt_irec got;
+ int is_empty;
+ int error = 0;
+
+ ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
+
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ return -EIO;
+
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ error = xfs_bmap_last_extent(NULL, ip, XFS_DATA_FORK, &got, &is_empty);
+ if (!error && !is_empty && got.br_startoff >= off &&
+ ((got.br_startoff + shift) & BMBT_STARTOFF_MASK) < got.br_startoff)
+ error = -EINVAL;
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+
+ return error;
+}
+
int
xfs_bmap_insert_extents(
struct xfs_trans *tp,
xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb,
bool *done, xfs_fsblock_t *firstblock,
struct xfs_defer_ops *dfops);
+int xfs_bmap_can_insert_extents(struct xfs_inode *ip, xfs_fileoff_t off,
+ xfs_fileoff_t shift);
int xfs_bmap_insert_extents(struct xfs_trans *tp, struct xfs_inode *ip,
xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb,
bool *done, xfs_fileoff_t stop_fsb, xfs_fsblock_t *firstblock,
XFS_DFORK_DSIZE(dip, mp) : \
XFS_DFORK_ASIZE(dip, mp))
+#define XFS_DFORK_MAXEXT(dip, mp, w) \
+ (XFS_DFORK_SIZE(dip, mp, w) / sizeof(struct xfs_bmbt_rec))
+
/*
* Return pointers to the data or attribute forks.
*/
#define BMBT_STARTBLOCK_BITLEN 52
#define BMBT_BLOCKCOUNT_BITLEN 21
+#define BMBT_STARTOFF_MASK ((1ULL << BMBT_STARTOFF_BITLEN) - 1)
+
typedef struct xfs_bmbt_rec {
__be64 l0, l1;
} xfs_bmbt_rec_t;
}
}
+static xfs_failaddr_t
+xfs_dinode_verify_fork(
+ struct xfs_dinode *dip,
+ struct xfs_mount *mp,
+ int whichfork)
+{
+ uint32_t di_nextents = XFS_DFORK_NEXTENTS(dip, whichfork);
+
+ switch (XFS_DFORK_FORMAT(dip, whichfork)) {
+ case XFS_DINODE_FMT_LOCAL:
+ /*
+ * no local regular files yet
+ */
+ if (whichfork == XFS_DATA_FORK) {
+ if (S_ISREG(be16_to_cpu(dip->di_mode)))
+ return __this_address;
+ if (be64_to_cpu(dip->di_size) >
+ XFS_DFORK_SIZE(dip, mp, whichfork))
+ return __this_address;
+ }
+ if (di_nextents)
+ return __this_address;
+ break;
+ case XFS_DINODE_FMT_EXTENTS:
+ if (di_nextents > XFS_DFORK_MAXEXT(dip, mp, whichfork))
+ return __this_address;
+ break;
+ case XFS_DINODE_FMT_BTREE:
+ if (whichfork == XFS_ATTR_FORK) {
+ if (di_nextents > MAXAEXTNUM)
+ return __this_address;
+ } else if (di_nextents > MAXEXTNUM) {
+ return __this_address;
+ }
+ break;
+ default:
+ return __this_address;
+ }
+ return NULL;
+}
+
xfs_failaddr_t
xfs_dinode_verify(
struct xfs_mount *mp,
case S_IFREG:
case S_IFLNK:
case S_IFDIR:
- switch (dip->di_format) {
- case XFS_DINODE_FMT_LOCAL:
- /*
- * no local regular files yet
- */
- if (S_ISREG(mode))
- return __this_address;
- if (di_size > XFS_DFORK_DSIZE(dip, mp))
- return __this_address;
- if (dip->di_nextents)
- return __this_address;
- /* fall through */
- case XFS_DINODE_FMT_EXTENTS:
- case XFS_DINODE_FMT_BTREE:
- break;
- default:
- return __this_address;
- }
+ fa = xfs_dinode_verify_fork(dip, mp, XFS_DATA_FORK);
+ if (fa)
+ return fa;
break;
case 0:
/* Uninitialized inode ok. */
}
if (XFS_DFORK_Q(dip)) {
- switch (dip->di_aformat) {
- case XFS_DINODE_FMT_LOCAL:
- if (dip->di_anextents)
- return __this_address;
- /* fall through */
- case XFS_DINODE_FMT_EXTENTS:
- case XFS_DINODE_FMT_BTREE:
- break;
- default:
- return __this_address;
- }
+ fa = xfs_dinode_verify_fork(dip, mp, XFS_ATTR_FORK);
+ if (fa)
+ return fa;
} else {
/*
* If there is no fork offset, this may be a freshly-made inode
if (low_rec->ar_startext >= mp->m_sb.sb_rextents ||
low_rec->ar_startext == high_rec->ar_startext)
return 0;
- if (high_rec->ar_startext >= mp->m_sb.sb_rextents)
- high_rec->ar_startext = mp->m_sb.sb_rextents - 1;
+ if (high_rec->ar_startext > mp->m_sb.sb_rextents)
+ high_rec->ar_startext = mp->m_sb.sb_rextents;
/* Iterate the bitmap, looking for discrepancies. */
rtstart = low_rec->ar_startext;
}
/*
- * dead simple method of punching delalyed allocation blocks from a range in
- * the inode. Walks a block at a time so will be slow, but is only executed in
- * rare error cases so the overhead is not critical. This will always punch out
- * both the start and end blocks, even if the ranges only partially overlap
- * them, so it is up to the caller to ensure that partial blocks are not
- * passed in.
+ * Dead simple method of punching delalyed allocation blocks from a range in
+ * the inode. This will always punch out both the start and end blocks, even
+ * if the ranges only partially overlap them, so it is up to the caller to
+ * ensure that partial blocks are not passed in.
*/
int
xfs_bmap_punch_delalloc_range(
xfs_fileoff_t start_fsb,
xfs_fileoff_t length)
{
- xfs_fileoff_t remaining = length;
+ struct xfs_ifork *ifp = &ip->i_df;
+ xfs_fileoff_t end_fsb = start_fsb + length;
+ struct xfs_bmbt_irec got, del;
+ struct xfs_iext_cursor icur;
int error = 0;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
- do {
- int done;
- xfs_bmbt_irec_t imap;
- int nimaps = 1;
- xfs_fsblock_t firstblock;
- struct xfs_defer_ops dfops;
+ if (!(ifp->if_flags & XFS_IFEXTENTS)) {
+ error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK);
+ if (error)
+ return error;
+ }
- /*
- * Map the range first and check that it is a delalloc extent
- * before trying to unmap the range. Otherwise we will be
- * trying to remove a real extent (which requires a
- * transaction) or a hole, which is probably a bad idea...
- */
- error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps,
- XFS_BMAPI_ENTIRE);
+ if (!xfs_iext_lookup_extent_before(ip, ifp, &end_fsb, &icur, &got))
+ return 0;
- if (error) {
- /* something screwed, just bail */
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- xfs_alert(ip->i_mount,
- "Failed delalloc mapping lookup ino %lld fsb %lld.",
- ip->i_ino, start_fsb);
- }
- break;
- }
- if (!nimaps) {
- /* nothing there */
- goto next_block;
- }
- if (imap.br_startblock != DELAYSTARTBLOCK) {
- /* been converted, ignore */
- goto next_block;
- }
- WARN_ON(imap.br_blockcount == 0);
+ while (got.br_startoff + got.br_blockcount > start_fsb) {
+ del = got;
+ xfs_trim_extent(&del, start_fsb, length);
/*
- * Note: while we initialise the firstblock/dfops pair, they
- * should never be used because blocks should never be
- * allocated or freed for a delalloc extent and hence we need
- * don't cancel or finish them after the xfs_bunmapi() call.
+ * A delete can push the cursor forward. Step back to the
+ * previous extent on non-delalloc or extents outside the
+ * target range.
*/
- xfs_defer_init(&dfops, &firstblock);
- error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
- &dfops, &done);
- if (error)
- break;
+ if (!del.br_blockcount ||
+ !isnullstartblock(del.br_startblock)) {
+ if (!xfs_iext_prev_extent(ifp, &icur, &got))
+ break;
+ continue;
+ }
- ASSERT(!xfs_defer_has_unfinished_work(&dfops));
-next_block:
- start_fsb++;
- remaining--;
- } while(remaining > 0);
+ error = xfs_bmap_del_extent_delay(ip, XFS_DATA_FORK, &icur,
+ &got, &del);
+ if (error || !xfs_iext_get_extent(ifp, &icur, &got))
+ break;
+ }
return error;
}
return 0;
if (offset + len > XFS_ISIZE(ip))
len = XFS_ISIZE(ip) - offset;
- return iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops);
+ error = iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops);
+ if (error)
+ return error;
+
+ /*
+ * If we zeroed right up to EOF and EOF straddles a page boundary we
+ * must make sure that the post-EOF area is also zeroed because the
+ * page could be mmap'd and iomap_zero_range doesn't do that for us.
+ * Writeback of the eof page will do this, albeit clumsily.
+ */
+ if (offset + len >= XFS_ISIZE(ip) && ((offset + len) & PAGE_MASK)) {
+ error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
+ (offset + len) & ~PAGE_MASK, LLONG_MAX);
+ }
+
+ return error;
}
/*
trace_xfs_insert_file_space(ip);
+ error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb);
+ if (error)
+ return error;
+
error = xfs_prepare_shift(ip, offset);
if (error)
return error;
struct xfs_trans *tp,
struct xfs_getfsmap_info *info)
{
- struct xfs_rtalloc_rec alow;
- struct xfs_rtalloc_rec ahigh;
+ struct xfs_rtalloc_rec alow = { 0 };
+ struct xfs_rtalloc_rec ahigh = { 0 };
int error;
xfs_ilock(tp->t_mountp->m_rbmip, XFS_ILOCK_SHARED);
do {
free = percpu_counter_sum(&mp->m_fdblocks) -
mp->m_alloc_set_aside;
- if (!free)
+ if (free <= 0)
break;
delta = request - mp->m_resblks;
struct xfs_inode *cip;
int nr_found;
int clcount = 0;
- int bufwasdelwri;
int i;
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
* inode buffer and shut down the filesystem.
*/
rcu_read_unlock();
- /*
- * Clean up the buffer. If it was delwri, just release it --
- * brelse can handle it with no problems. If not, shut down the
- * filesystem before releasing the buffer.
- */
- bufwasdelwri = (bp->b_flags & _XBF_DELWRI_Q);
- if (bufwasdelwri)
- xfs_buf_relse(bp);
-
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
- if (!bufwasdelwri) {
- /*
- * Just like incore_relse: if we have b_iodone functions,
- * mark the buffer as an error and call them. Otherwise
- * mark it as stale and brelse.
- */
- if (bp->b_iodone) {
- bp->b_flags &= ~XBF_DONE;
- xfs_buf_stale(bp);
- xfs_buf_ioerror(bp, -EIO);
- xfs_buf_ioend(bp);
- } else {
- xfs_buf_stale(bp);
- xfs_buf_relse(bp);
- }
- }
-
/*
- * Unlocks the flush lock
+ * We'll always have an inode attached to the buffer for completion
+ * process by the time we are called from xfs_iflush(). Hence we have
+ * always need to do IO completion processing to abort the inodes
+ * attached to the buffer. handle them just like the shutdown case in
+ * xfs_buf_submit().
*/
+ ASSERT(bp->b_iodone);
+ bp->b_flags &= ~XBF_DONE;
+ xfs_buf_stale(bp);
+ xfs_buf_ioerror(bp, -EIO);
+ xfs_buf_ioend(bp);
+
+ /* abort the corrupt inode, as it was not attached to the buffer */
xfs_iflush_abort(cip, false);
kmem_free(cilist);
xfs_perag_put(pag);
xfs_log_force(mp, 0);
/*
- * inode clustering:
- * see if other inodes can be gathered into this write
+ * inode clustering: try to gather other inodes into this write
+ *
+ * Note: Any error during clustering will result in the filesystem
+ * being shut down and completion callbacks run on the cluster buffer.
+ * As we have already flushed and attached this inode to the buffer,
+ * it has already been aborted and released by xfs_iflush_cluster() and
+ * so we have no further error handling to do here.
*/
error = xfs_iflush_cluster(ip, bp);
if (error)
- goto cluster_corrupt_out;
+ return error;
*bpp = bp;
return 0;
if (bp)
xfs_buf_relse(bp);
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-cluster_corrupt_out:
- error = -EFSCORRUPTED;
abort_out:
- /*
- * Unlocks the flush lock
- */
+ /* abort the corrupt inode, as it was not attached to the buffer */
xfs_iflush_abort(ip, false);
return error;
}
unsigned *lockmode)
{
unsigned mode = XFS_ILOCK_SHARED;
+ bool is_write = flags & (IOMAP_WRITE | IOMAP_ZERO);
/*
* COW writes may allocate delalloc space or convert unwritten COW
* extents, so we need to make sure to take the lock exclusively here.
*/
- if (xfs_is_reflink_inode(ip) && (flags & (IOMAP_WRITE | IOMAP_ZERO))) {
+ if (xfs_is_reflink_inode(ip) && is_write) {
/*
* FIXME: It could still overwrite on unshared extents and not
* need allocation.
mode = XFS_ILOCK_EXCL;
}
+relock:
if (flags & IOMAP_NOWAIT) {
if (!xfs_ilock_nowait(ip, mode))
return -EAGAIN;
xfs_ilock(ip, mode);
}
+ /*
+ * The reflink iflag could have changed since the earlier unlocked
+ * check, so if we got ILOCK_SHARED for a write and but we're now a
+ * reflink inode we have to switch to ILOCK_EXCL and relock.
+ */
+ if (mode == XFS_ILOCK_SHARED && is_write && xfs_is_reflink_inode(ip)) {
+ xfs_iunlock(ip, mode);
+ mode = XFS_ILOCK_EXCL;
+ goto relock;
+ }
+
*lockmode = mode;
return 0;
}
if (!(flags & XFS_TRANS_NO_WRITECOUNT))
sb_start_intwrite(mp->m_super);
- WARN_ON(mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE);
+ /*
+ * Zero-reservation ("empty") transactions can't modify anything, so
+ * they're allowed to run while we're frozen.
+ */
+ WARN_ON(resp->tr_logres > 0 &&
+ mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE);
atomic_inc(&mp->m_active_trans);
tp = kmem_zone_zalloc(xfs_trans_zone,
int offset, size_t size, int flags);
void af_alg_free_resources(struct af_alg_async_req *areq);
void af_alg_async_cb(struct crypto_async_request *_req, int err);
-__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events);
+__poll_t af_alg_poll(struct file *file, struct socket *sock,
+ poll_table *wait);
struct af_alg_async_req *af_alg_alloc_areq(struct sock *sk,
unsigned int areqlen);
int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags,
if (!q->limits.chunk_sectors)
return q->limits.max_sectors;
- return q->limits.chunk_sectors -
- (offset & (q->limits.chunk_sectors - 1));
+ return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors -
+ (offset & (q->limits.chunk_sectors - 1))));
}
static inline unsigned int blk_rq_get_max_sectors(struct request *rq,
*/
#ifndef COMPAT_SYSCALL_DEFINEx
#define COMPAT_SYSCALL_DEFINEx(x, name, ...) \
+ __diag_push(); \
+ __diag_ignore(GCC, 8, "-Wattribute-alias", \
+ "Type aliasing is used to sanitize syscall arguments");\
asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \
asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
__attribute__((alias(__stringify(__se_compat_sys##name)))); \
asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \
asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
{ \
- return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\
+ long ret = __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\
+ __MAP(x,__SC_TEST,__VA_ARGS__); \
+ return ret; \
} \
+ __diag_pop(); \
static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
#endif /* COMPAT_SYSCALL_DEFINEx */
#if GCC_VERSION >= 50100
#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
#endif
+
+/*
+ * Turn individual warnings and errors on and off locally, depending
+ * on version.
+ */
+#define __diag_GCC(version, severity, s) \
+ __diag_GCC_ ## version(__diag_GCC_ ## severity s)
+
+/* Severity used in pragma directives */
+#define __diag_GCC_ignore ignored
+#define __diag_GCC_warn warning
+#define __diag_GCC_error error
+
+/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */
+#if GCC_VERSION >= 40600
+#define __diag_str1(s) #s
+#define __diag_str(s) __diag_str1(s)
+#define __diag(s) _Pragma(__diag_str(GCC diagnostic s))
+#endif
+
+#if GCC_VERSION >= 80000
+#define __diag_GCC_8(s) __diag(s)
+#else
+#define __diag_GCC_8(s)
+#endif
# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
#endif
+#ifndef __diag
+#define __diag(string)
+#endif
+
+#ifndef __diag_GCC
+#define __diag_GCC(version, severity, string)
+#endif
+
+#define __diag_push() __diag(push)
+#define __diag_pop() __diag(pop)
+
+#define __diag_ignore(compiler, version, option, comment) \
+ __diag_ ## compiler(version, ignore, option)
+#define __diag_warn(compiler, version, option, comment) \
+ __diag_ ## compiler(version, warn, option)
+#define __diag_error(compiler, version, option, comment) \
+ __diag_ ## compiler(version, error, option)
+
#endif /* __LINUX_COMPILER_TYPES_H */
ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter,
const struct iomap_ops *ops);
-int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size,
+vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size,
pfn_t *pfnp, int *errp, const struct iomap_ops *ops);
vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf,
enum page_entry_size pe_size, pfn_t pfn);
struct bpf_binary_header {
u16 pages;
u16 locked:1;
- u8 image[];
+
+ /* Some arches need word alignment for their instructions */
+ u8 image[] __aligned(4);
};
struct bpf_prog {
int (*iterate) (struct file *, struct dir_context *);
int (*iterate_shared) (struct file *, struct dir_context *);
__poll_t (*poll) (struct file *, struct poll_table_struct *);
- struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
- __poll_t (*poll_mask) (struct file *, __poll_t);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
return axis == ABS_MT_SLOT || input_is_mt_value(axis);
}
-void input_mt_report_slot_state(struct input_dev *dev,
+bool input_mt_report_slot_state(struct input_dev *dev,
unsigned int tool_type, bool active);
void input_mt_report_finger_count(struct input_dev *dev, int count);
int (*getname) (struct socket *sock,
struct sockaddr *addr,
int peer);
- __poll_t (*poll_mask) (struct socket *sock, __poll_t events);
__poll_t (*poll) (struct file *file, struct socket *sock,
struct poll_table_struct *wait);
int (*ioctl) (struct socket *sock, unsigned int cmd,
int of_genpd_parse_idle_states(struct device_node *dn,
struct genpd_power_state **states, int *n);
unsigned int of_genpd_opp_to_performance_state(struct device *dev,
- struct device_node *opp_node);
+ struct device_node *np);
int genpd_dev_pm_attach(struct device *dev);
struct device *genpd_dev_pm_attach_by_id(struct device *dev,
static inline unsigned int
of_genpd_opp_to_performance_state(struct device *dev,
- struct device_node *opp_node)
+ struct device_node *np)
{
- return -ENODEV;
+ return 0;
}
static inline int genpd_dev_pm_attach(struct device *dev)
pt->_key = ~(__poll_t)0; /* all events enabled */
}
-static inline bool file_has_poll_mask(struct file *file)
+static inline bool file_can_poll(struct file *file)
{
- return file->f_op->get_poll_head && file->f_op->poll_mask;
+ return file->f_op->poll;
}
-static inline bool file_can_poll(struct file *file)
+static inline __poll_t vfs_poll(struct file *file, struct poll_table_struct *pt)
{
- return file->f_op->poll || file_has_poll_mask(file);
+ if (unlikely(!file->f_op->poll))
+ return DEFAULT_POLLMASK;
+ return file->f_op->poll(file, pt);
}
-__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt);
-
struct poll_table_entry {
struct file *filp;
__poll_t key;
struct mutex irq_mutex;
struct input_dev *input;
+ struct irq_domain *irqdomain;
+
u8 pdt_props;
u8 num_rx_electrodes;
#include <asm/io.h>
struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
unsigned long page_link;
unsigned int offset;
unsigned int length;
*
*/
-#define SG_MAGIC 0x87654321
#define SG_CHAIN 0x01UL
#define SG_END 0x02UL
*/
BUG_ON((unsigned long) page & (SG_CHAIN | SG_END));
#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
BUG_ON(sg_is_chain(sg));
#endif
sg->page_link = page_link | (unsigned long) page;
static inline struct page *sg_page(struct scatterlist *sg)
{
#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
BUG_ON(sg_is_chain(sg));
#endif
return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END));
**/
static inline void sg_mark_end(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
/*
* Set termination bit, clear potential chain bit
*/
**/
static inline void sg_unmark_end(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
sg->page_link &= ~SG_END;
}
static inline void sg_init_marker(struct scatterlist *sgl,
unsigned int nents)
{
-#ifdef CONFIG_DEBUG_SG
- unsigned int i;
-
- for (i = 0; i < nents; i++)
- sgl[i].sg_magic = SG_MAGIC;
-#endif
sg_mark_end(&sgl[nents - 1]);
}
int *peeked, int *off, int *err);
struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock,
int *err);
-__poll_t datagram_poll_mask(struct socket *sock, __poll_t events);
+__poll_t datagram_poll(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait);
int skb_copy_datagram_iter(const struct sk_buff *from, int offset,
struct iov_iter *to, int size);
static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset,
#ifdef CONFIG_SYSFS
#define SLAB_SUPPORTS_SYSFS
+void sysfs_slab_unlink(struct kmem_cache *);
void sysfs_slab_release(struct kmem_cache *);
#else
+static inline void sysfs_slab_unlink(struct kmem_cache *s)
+{
+}
static inline void sysfs_slab_release(struct kmem_cache *s)
{
}
*/
#ifndef __SYSCALL_DEFINEx
#define __SYSCALL_DEFINEx(x, name, ...) \
+ __diag_push(); \
+ __diag_ignore(GCC, 8, "-Wattribute-alias", \
+ "Type aliasing is used to sanitize syscall arguments");\
asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
__attribute__((alias(__stringify(__se_sys##name)))); \
ALLOW_ERROR_INJECTION(sys##name, ERRNO); \
__PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \
return ret; \
} \
+ __diag_pop(); \
static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
#endif /* __SYSCALL_DEFINEx */
int flags);
int bt_sock_stream_recvmsg(struct socket *sock, struct msghdr *msg,
size_t len, int flags);
-__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events);
+__poll_t bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait);
int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
int bt_sock_wait_ready(struct sock *sk, unsigned long flags);
atomic_t autobind_name;
};
+__poll_t iucv_sock_poll(struct file *file, struct socket *sock,
+ poll_table *wait);
void iucv_sock_link(struct iucv_sock_list *l, struct sock *s);
void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s);
void iucv_accept_enqueue(struct sock *parent, struct sock *sk);
int sctp_inet_listen(struct socket *sock, int backlog);
void sctp_write_space(struct sock *sk);
void sctp_data_ready(struct sock *sk);
-__poll_t sctp_poll_mask(struct socket *sock, __poll_t events);
+__poll_t sctp_poll(struct file *file, struct socket *sock,
+ poll_table *wait);
void sctp_sock_rfree(struct sk_buff *skb);
void sctp_copy_sock(struct sock *newsk, struct sock *sk,
struct sctp_association *asoc);
void tcp_close(struct sock *sk, long timeout);
void tcp_init_sock(struct sock *sk);
void tcp_init_transfer(struct sock *sk, int bpf_op);
-__poll_t tcp_poll_mask(struct socket *sock, __poll_t events);
+__poll_t tcp_poll(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait);
int tcp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
int tcp_setsockopt(struct sock *sk, int level, int optname,
struct strparser strp;
void (*saved_data_ready)(struct sock *sk);
- __poll_t (*sk_poll_mask)(struct socket *sock, __poll_t events);
+ unsigned int (*sk_poll)(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait);
struct sk_buff *recv_pkt;
u8 control;
bool decrypted;
void tls_sw_free_resources_rx(struct sock *sk);
int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
int nonblock, int flags, int *addr_len);
-__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events);
+unsigned int tls_sw_poll(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait);
ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len, unsigned int flags);
int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len);
int __udp_disconnect(struct sock *sk, int flags);
int udp_disconnect(struct sock *sk, int flags);
-__poll_t udp_poll_mask(struct socket *sock, __poll_t events);
+__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait);
struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
netdev_features_t features,
bool is_ipv6);
IOCB_CMD_PWRITE = 1,
IOCB_CMD_FSYNC = 2,
IOCB_CMD_FDSYNC = 3,
- /* 4 was the experimental IOCB_CMD_PREADX */
- IOCB_CMD_POLL = 5,
+ /* These two are experimental.
+ * IOCB_CMD_PREADX = 4,
+ * IOCB_CMD_POLL = 5,
+ */
IOCB_CMD_NOOP = 6,
IOCB_CMD_PREADV = 7,
IOCB_CMD_PWRITEV = 8,
#define TCMU_MAILBOX_VERSION 2
#define ALIGN_SIZE 64 /* Should be enough for most CPUs */
#define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */
+#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */
struct tcmu_mailbox {
__u16 version;
__u16 cmd_id;
__u8 kflags;
#define TCMU_UFLAG_UNKNOWN_OP 0x1
+#define TCMU_UFLAG_READ_LEN 0x2
__u8 uflags;
} __packed;
__u8 scsi_status;
__u8 __pad1;
__u16 __pad2;
- __u32 __pad3;
+ __u32 read_len;
char sense_buffer[TCMU_SENSE_BUFFERSIZE];
} rsp;
};
depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION
depends on EXPERT
help
- Select this if the architecture wants to do dead code and
- data elimination with the linker by compiling with
- -ffunction-sections -fdata-sections, and linking with
- --gc-sections.
+ Enable this if you want to do dead code and data elimination with
+ the linker by compiling with -ffunction-sections -fdata-sections,
+ and linking with --gc-sections.
This can reduce on disk and in-memory size of the kernel
code and static data, particularly for small configs and
.unmap_page = swiotlb_unmap_page,
.dma_supported = dma_direct_supported,
};
+EXPORT_SYMBOL(swiotlb_dma_ops);
data->phys_addr = perf_virt_to_phys(data->addr);
}
-static void __always_inline
+static __always_inline void
__perf_event_output(struct perf_event *event,
struct perf_sample_data *data,
struct pt_regs *regs,
config KASAN
bool "KASan: runtime memory debugger"
depends on SLUB || (SLAB && !DEBUG_SLAB)
+ select SLUB_DEBUG if SLUB
select CONSTRUCTORS
select STACKDEPOT
help
spin_lock_irqsave(&tags->lock, flags);
/* Fastpath */
- if (likely(tags->nr_free >= 0)) {
+ if (likely(tags->nr_free)) {
tag = tags->freelist[--tags->nr_free];
spin_unlock_irqrestore(&tags->lock, flags);
return tag;
**/
struct scatterlist *sg_next(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
if (sg_is_last(sg))
return NULL;
for_each_sg(sgl, sg, nents, i)
ret = sg;
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sgl[0].sg_magic != SG_MAGIC);
BUG_ON(!sg_is_last(ret));
-#endif
return ret;
}
EXPORT_SYMBOL(sg_last);
{
int err;
- /*
- * Make sure crng is ready. Otherwise we get "(ptrval)" instead
- * of a hashed address when printing '%p' in plain_hash() and
- * plain_format().
- */
- wait_for_random_bytes();
-
err = plain_hash();
if (err) {
pr_warn("plain 'p' does not appear to be hashed\n");
list_del(&s->list);
if (s->flags & SLAB_TYPESAFE_BY_RCU) {
+#ifdef SLAB_SUPPORTS_SYSFS
+ sysfs_slab_unlink(s);
+#endif
list_add_tail(&s->list, &slab_caches_to_rcu_destroy);
schedule_work(&slab_caches_to_rcu_destroy_work);
} else {
#ifdef SLAB_SUPPORTS_SYSFS
+ sysfs_slab_unlink(s);
sysfs_slab_release(s);
#else
slab_kmem_cache_release(s);
kset_unregister(s->memcg_kset);
#endif
kobject_uevent(&s->kobj, KOBJ_REMOVE);
- kobject_del(&s->kobj);
out:
kobject_put(&s->kobj);
}
schedule_work(&s->kobj_remove_work);
}
+void sysfs_slab_unlink(struct kmem_cache *s)
+{
+ if (slab_state >= FULL)
+ kobject_del(&s->kobj);
+}
+
void sysfs_slab_release(struct kmem_cache *s)
{
if (slab_state >= FULL)
* to occur in the future. Keep on running the
* update worker thread.
*/
- preempt_disable();
queue_delayed_work_on(smp_processor_id(), mm_percpu_wq,
this_cpu_ptr(&vmstat_work),
round_jiffies_relative(sysctl_stat_interval));
- preempt_enable();
}
}
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = atalk_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = atalk_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = atalk_compat_ioctl,
return error;
}
-__poll_t vcc_poll_mask(struct socket *sock, __poll_t events)
+__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
- struct atm_vcc *vcc = ATM_SD(sock);
- __poll_t mask = 0;
+ struct atm_vcc *vcc;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
+
+ vcc = ATM_SD(sock);
/* exceptional events */
if (sk->sk_err)
int vcc_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int flags);
int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len);
-__poll_t vcc_poll_mask(struct socket *sock, __poll_t events);
+__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait);
int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int vcc_setsockopt(struct socket *sock, int level, int optname,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = pvc_getname,
- .poll_mask = vcc_poll_mask,
+ .poll = vcc_poll,
.ioctl = vcc_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = vcc_compat_ioctl,
.socketpair = sock_no_socketpair,
.accept = svc_accept,
.getname = svc_getname,
- .poll_mask = vcc_poll_mask,
+ .poll = vcc_poll,
.ioctl = svc_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = svc_compat_ioctl,
.socketpair = sock_no_socketpair,
.accept = ax25_accept,
.getname = ax25_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = ax25_ioctl,
.listen = ax25_listen,
.shutdown = ax25_shutdown,
return 0;
}
-__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events)
+__poll_t bt_sock_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
__poll_t mask = 0;
BT_DBG("sock %p, sk %p", sock, sk);
+ poll_wait(file, sk_sleep(sk), wait);
+
if (sk->sk_state == BT_LISTEN)
return bt_accept_poll(sk);
return mask;
}
-EXPORT_SYMBOL(bt_sock_poll_mask);
+EXPORT_SYMBOL(bt_sock_poll);
int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
.sendmsg = hci_sock_sendmsg,
.recvmsg = hci_sock_recvmsg,
.ioctl = hci_sock_ioctl,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = hci_sock_setsockopt,
.getname = l2cap_sock_getname,
.sendmsg = l2cap_sock_sendmsg,
.recvmsg = l2cap_sock_recvmsg,
- .poll_mask = bt_sock_poll_mask,
+ .poll = bt_sock_poll,
.ioctl = bt_sock_ioctl,
.mmap = sock_no_mmap,
.socketpair = sock_no_socketpair,
.setsockopt = rfcomm_sock_setsockopt,
.getsockopt = rfcomm_sock_getsockopt,
.ioctl = rfcomm_sock_ioctl,
- .poll_mask = bt_sock_poll_mask,
+ .poll = bt_sock_poll,
.socketpair = sock_no_socketpair,
.mmap = sock_no_mmap
};
.getname = sco_sock_getname,
.sendmsg = sco_sock_sendmsg,
.recvmsg = sco_sock_recvmsg,
- .poll_mask = bt_sock_poll_mask,
+ .poll = bt_sock_poll,
.ioctl = bt_sock_ioctl,
.mmap = sock_no_mmap,
.socketpair = sock_no_socketpair,
quiet_cmd_copy_umh = GEN $@
cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \
$(OBJCOPY) -I binary \
- `LC_ALL=C objdump -f net/bpfilter/bpfilter_umh \
+ `LC_ALL=C $(OBJDUMP) -f net/bpfilter/bpfilter_umh \
|awk -F' |,' '/file format/{print "-O",$$NF} \
/^architecture:/{print "-B",$$2}'` \
--rename-section .data=.init.rodata $< $@
}
/* Copied from af_unix.c:unix_poll(), added CAIF tx_flow handling */
-static __poll_t caif_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t caif_poll(struct file *file,
+ struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
+ __poll_t mask;
struct caifsock *cf_sk = container_of(sk, struct caifsock, sk);
- __poll_t mask = 0;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
/* exceptional events? */
if (sk->sk_err)
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = caif_poll_mask,
+ .poll = caif_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = caif_poll_mask,
+ .poll = caif_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = can_ioctl, /* use can_ioctl() from af_can.c */
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = raw_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = can_ioctl, /* use can_ioctl() from af_can.c */
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
/**
* datagram_poll - generic datagram poll
+ * @file: file struct
* @sock: socket
- * @events to wait for
+ * @wait: poll table
*
* Datagram poll: Again totally generic. This also handles
* sequenced packet sockets providing the socket receive queue
* and you use a different write policy from sock_writeable()
* then please supply your own write_space callback.
*/
-__poll_t datagram_poll_mask(struct socket *sock, __poll_t events)
+__poll_t datagram_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
- __poll_t mask = 0;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
/* exceptional events? */
if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue))
return mask;
}
-EXPORT_SYMBOL(datagram_poll_mask);
+EXPORT_SYMBOL(datagram_poll);
{
struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
struct dccp_sock *dp = dccp_sk(sk);
- ktime_t now = ktime_get_real();
+ ktime_t now = ktime_get();
s64 delta = 0;
switch (fbtype) {
case CCID3_FBACK_PERIODIC:
delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
if (delta <= 0)
- DCCP_BUG("delta (%ld) <= 0", (long)delta);
- else
- hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
+ delta = 1;
+ hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
break;
default:
return;
}
- ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
+ ccid3_pr_debug("Interval %lldusec, X_recv=%u, 1/p=%u\n", delta,
hc->rx_x_recv, hc->rx_pinv);
hc->rx_tstamp_last_feedback = now;
static u32 ccid3_first_li(struct sock *sk)
{
struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
- u32 x_recv, p, delta;
+ u32 x_recv, p;
+ s64 delta;
u64 fval;
if (hc->rx_rtt == 0) {
hc->rx_rtt = DCCP_FALLBACK_RTT;
}
- delta = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+ delta = ktime_us_delta(ktime_get(), hc->rx_tstamp_last_feedback);
+ if (delta <= 0)
+ delta = 1;
x_recv = scaled_div32(hc->rx_bytes_recv, delta);
if (x_recv == 0) { /* would also trigger divide-by-zero */
DCCP_WARN("X_recv==0\n");
int flags, int *addr_len);
void dccp_shutdown(struct sock *sk, int how);
int inet_dccp_listen(struct socket *sock, int backlog);
-__poll_t dccp_poll_mask(struct socket *sock, __poll_t events);
+__poll_t dccp_poll(struct file *file, struct socket *sock,
+ poll_table *wait);
int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len);
void dccp_req_err(struct sock *sk, u64 seq);
.accept = inet_accept,
.getname = inet_getname,
/* FIXME: work on tcp_poll to rename it to inet_csk_poll */
- .poll_mask = dccp_poll_mask,
+ .poll = dccp_poll,
.ioctl = inet_ioctl,
/* FIXME: work on inet_listen to rename it to sock_common_listen */
.listen = inet_dccp_listen,
.socketpair = sock_no_socketpair,
.accept = inet_accept,
.getname = inet6_getname,
- .poll_mask = dccp_poll_mask,
+ .poll = dccp_poll,
.ioctl = inet6_ioctl,
.listen = inet_dccp_listen,
.shutdown = inet_shutdown,
EXPORT_SYMBOL_GPL(dccp_disconnect);
-__poll_t dccp_poll_mask(struct socket *sock, __poll_t events)
+/*
+ * Wait for a DCCP event.
+ *
+ * Note that we don't need to lock the socket, as the upper poll layers
+ * take care of normal races (between the test and the event) and we don't
+ * go look at any of the socket buffers directly.
+ */
+__poll_t dccp_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
__poll_t mask;
struct sock *sk = sock->sk;
+ sock_poll_wait(file, sk_sleep(sk), wait);
if (sk->sk_state == DCCP_LISTEN)
return inet_csk_listen_poll(sk);
return mask;
}
-EXPORT_SYMBOL_GPL(dccp_poll_mask);
+EXPORT_SYMBOL_GPL(dccp_poll);
int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
}
-static __poll_t dn_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t dn_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
struct dn_scp *scp = DN_SK(sk);
- __poll_t mask = datagram_poll_mask(sock, events);
+ __poll_t mask = datagram_poll(file, sock, wait);
if (!skb_queue_empty(&scp->other_receive_queue))
mask |= EPOLLRDBAND;
.socketpair = sock_no_socketpair,
.accept = dn_accept,
.getname = dn_getname,
- .poll_mask = dn_poll_mask,
+ .poll = dn_poll,
.ioctl = dn_ioctl,
.listen = dn_listen,
.shutdown = dn_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = ieee802154_sock_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = ieee802154_sock_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = inet_accept,
.getname = inet_getname,
- .poll_mask = tcp_poll_mask,
+ .poll = tcp_poll,
.ioctl = inet_ioctl,
.listen = inet_listen,
.shutdown = inet_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = inet_getname,
- .poll_mask = udp_poll_mask,
+ .poll = udp_poll,
.ioctl = inet_ioctl,
.listen = sock_no_listen,
.shutdown = inet_shutdown,
/*
* For SOCK_RAW sockets; should be the same as inet_dgram_ops but without
- * udp_poll_mask
+ * udp_poll
*/
static const struct proto_ops inet_sockraw_ops = {
.family = PF_INET,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = inet_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = inet_ioctl,
.listen = sock_no_listen,
.shutdown = inet_shutdown,
}
/*
- * Socket is not locked. We are protected from async events by poll logic and
- * correct handling of state changes made by other threads is impossible in
- * any case.
+ * Wait for a TCP event.
+ *
+ * Note that we don't need to lock the socket, as the upper poll layers
+ * take care of normal races (between the test and the event) and we don't
+ * go look at any of the socket buffers directly.
*/
-__poll_t tcp_poll_mask(struct socket *sock, __poll_t events)
+__poll_t tcp_poll(struct file *file, struct socket *sock, poll_table *wait)
{
+ __poll_t mask;
struct sock *sk = sock->sk;
const struct tcp_sock *tp = tcp_sk(sk);
- __poll_t mask = 0;
int state;
+ sock_poll_wait(file, sk_sleep(sk), wait);
+
state = inet_sk_state_load(sk);
if (state == TCP_LISTEN)
return inet_csk_listen_poll(sk);
+ /* Socket is not locked. We are protected from async events
+ * by poll logic and correct handling of state changes
+ * made by other threads is impossible in any case.
+ */
+
+ mask = 0;
+
/*
* EPOLLHUP is certainly not done right. But poll() doesn't
* have a notion of HUP in just one direction, and for a
return mask;
}
-EXPORT_SYMBOL(tcp_poll_mask);
+EXPORT_SYMBOL(tcp_poll);
int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
* udp_poll - wait for a UDP event.
* @file - file struct
* @sock - socket
- * @events - events to wait for
+ * @wait - poll table
*
* This is same as datagram poll, except for the special case of
* blocking sockets. If application is using a blocking fd
* but then block when reading it. Add special case code
* to work around these arguably broken applications.
*/
-__poll_t udp_poll_mask(struct socket *sock, __poll_t events)
+__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait)
{
- __poll_t mask = datagram_poll_mask(sock, events);
+ __poll_t mask = datagram_poll(file, sock, wait);
struct sock *sk = sock->sk;
if (!skb_queue_empty(&udp_sk(sk)->reader_queue))
mask |= EPOLLIN | EPOLLRDNORM;
/* Check for false positives due to checksum errors */
- if ((mask & EPOLLRDNORM) && !(sock->file->f_flags & O_NONBLOCK) &&
+ if ((mask & EPOLLRDNORM) && !(file->f_flags & O_NONBLOCK) &&
!(sk->sk_shutdown & RCV_SHUTDOWN) && first_packet_length(sk) == -1)
mask &= ~(EPOLLIN | EPOLLRDNORM);
return mask;
}
-EXPORT_SYMBOL(udp_poll_mask);
+EXPORT_SYMBOL(udp_poll);
int udp_abort(struct sock *sk, int err)
{
.socketpair = sock_no_socketpair, /* a do nothing */
.accept = inet_accept, /* ok */
.getname = inet6_getname,
- .poll_mask = tcp_poll_mask, /* ok */
+ .poll = tcp_poll, /* ok */
.ioctl = inet6_ioctl, /* must change */
.listen = inet_listen, /* ok */
.shutdown = inet_shutdown, /* ok */
.socketpair = sock_no_socketpair, /* a do nothing */
.accept = sock_no_accept, /* a do nothing */
.getname = inet6_getname,
- .poll_mask = udp_poll_mask, /* ok */
+ .poll = udp_poll, /* ok */
.ioctl = inet6_ioctl, /* must change */
.listen = sock_no_listen, /* ok */
.shutdown = inet_shutdown, /* ok */
mld_send_initial_cr(idev);
idev->mc_dad_count--;
if (idev->mc_dad_count)
- mld_dad_start_timer(idev, idev->mc_maxdelay);
+ mld_dad_start_timer(idev,
+ unsolicited_report_interval(idev));
}
}
if (idev->mc_dad_count) {
idev->mc_dad_count--;
if (idev->mc_dad_count)
- mld_dad_start_timer(idev, idev->mc_maxdelay);
+ mld_dad_start_timer(idev,
+ unsolicited_report_interval(idev));
}
in6_dev_put(idev);
}
if (idev->mc_ifc_count) {
idev->mc_ifc_count--;
if (idev->mc_ifc_count)
- mld_ifc_start_timer(idev, idev->mc_maxdelay);
+ mld_ifc_start_timer(idev,
+ unsolicited_report_interval(idev));
}
in6_dev_put(idev);
}
}
#endif /* CONFIG_PROC_FS */
-/* Same as inet6_dgram_ops, sans udp_poll_mask. */
+/* Same as inet6_dgram_ops, sans udp_poll. */
const struct proto_ops inet6_sockraw_ops = {
.family = PF_INET6,
.owner = THIS_MODULE,
.socketpair = sock_no_socketpair, /* a do nothing */
.accept = sock_no_accept, /* a do nothing */
.getname = inet6_getname,
- .poll_mask = datagram_poll_mask, /* ok */
+ .poll = datagram_poll, /* ok */
.ioctl = inet6_ioctl, /* must change */
.listen = sock_no_listen, /* ok */
.shutdown = inet_shutdown, /* ok */
return 0;
}
-static __poll_t iucv_sock_poll_mask(struct socket *sock, __poll_t events)
+__poll_t iucv_sock_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
__poll_t mask = 0;
+ sock_poll_wait(file, sk_sleep(sk), wait);
+
if (sk->sk_state == IUCV_LISTEN)
return iucv_accept_poll(sk);
.getname = iucv_sock_getname,
.sendmsg = iucv_sock_sendmsg,
.recvmsg = iucv_sock_recvmsg,
- .poll_mask = iucv_sock_poll_mask,
+ .poll = iucv_sock_poll,
.ioctl = sock_no_ioctl,
.mmap = sock_no_mmap,
.socketpair = sock_no_socketpair,
struct list_head *head;
int index = 0;
- /* For SOCK_SEQPACKET sock type, datagram_poll_mask checks the sk_state,
- * so we set sk_state, otherwise epoll_wait always returns right away
- * with EPOLLHUP
+ /* For SOCK_SEQPACKET sock type, datagram_poll checks the sk_state, so
+ * we set sk_state, otherwise epoll_wait always returns right away with
+ * EPOLLHUP
*/
kcm->sk.sk_state = TCP_ESTABLISHED;
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = kcm_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = kcm_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
/* Now the operations that really occur. */
.release = pfkey_release,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.sendmsg = pfkey_sendmsg,
.recvmsg = pfkey_recvmsg,
};
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = l2tp_ip_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = inet_ioctl,
.listen = sock_no_listen,
.shutdown = inet_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = l2tp_ip6_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = inet6_ioctl,
.listen = sock_no_listen,
.shutdown = inet_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = pppol2tp_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = pppol2tp_setsockopt,
.socketpair = sock_no_socketpair,
.accept = llc_ui_accept,
.getname = llc_ui_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = llc_ui_ioctl,
.listen = llc_ui_listen,
.shutdown = llc_ui_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = netlink_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = netlink_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = nr_accept,
.getname = nr_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = nr_ioctl,
.listen = nr_listen,
.shutdown = sock_no_shutdown,
return 0;
}
-static __poll_t llcp_sock_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t llcp_sock_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
__poll_t mask = 0;
pr_debug("%p\n", sk);
+ sock_poll_wait(file, sk_sleep(sk), wait);
+
if (sk->sk_state == LLCP_LISTEN)
return llcp_accept_poll(sk);
.socketpair = sock_no_socketpair,
.accept = llcp_sock_accept,
.getname = llcp_sock_getname,
- .poll_mask = llcp_sock_poll_mask,
+ .poll = llcp_sock_poll,
.ioctl = sock_no_ioctl,
.listen = llcp_sock_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = llcp_sock_getname,
- .poll_mask = llcp_sock_poll_mask,
+ .poll = llcp_sock_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
if (po->stats.stats1.tp_drops)
status |= TP_STATUS_LOSING;
}
+
+ if (do_vnet &&
+ virtio_net_hdr_from_skb(skb, h.raw + macoff -
+ sizeof(struct virtio_net_hdr),
+ vio_le(), true, 0))
+ goto drop_n_account;
+
po->stats.stats1.tp_packets++;
if (copy_skb) {
status |= TP_STATUS_COPY;
}
spin_unlock(&sk->sk_receive_queue.lock);
- if (do_vnet) {
- if (virtio_net_hdr_from_skb(skb, h.raw + macoff -
- sizeof(struct virtio_net_hdr),
- vio_le(), true, 0)) {
- spin_lock(&sk->sk_receive_queue.lock);
- goto drop_n_account;
- }
- }
-
skb_copy_bits(skb, 0, h.raw + macoff, snaplen);
if (!(ts_status = tpacket_get_timestamp(skb, &ts, po->tp_tstamp)))
return 0;
}
-static __poll_t packet_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t packet_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
- __poll_t mask = datagram_poll_mask(sock, events);
+ __poll_t mask = datagram_poll(file, sock, wait);
spin_lock_bh(&sk->sk_receive_queue.lock);
if (po->rx_ring.pg_vec) {
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = packet_getname_spkt,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = packet_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = packet_getname,
- .poll_mask = packet_poll_mask,
+ .poll = packet_poll,
.ioctl = packet_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
return sizeof(struct sockaddr_pn);
}
-static __poll_t pn_socket_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t pn_socket_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
struct pep_sock *pn = pep_sk(sk);
__poll_t mask = 0;
+ poll_wait(file, sk_sleep(sk), wait);
+
if (sk->sk_state == TCP_CLOSE)
return EPOLLERR;
if (!skb_queue_empty(&sk->sk_receive_queue))
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = pn_socket_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = pn_socket_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.socketpair = sock_no_socketpair,
.accept = pn_socket_accept,
.getname = pn_socket_getname,
- .poll_mask = pn_socket_poll_mask,
+ .poll = pn_socket_poll,
.ioctl = pn_socket_ioctl,
.listen = pn_socket_listen,
.shutdown = sock_no_shutdown,
.recvmsg = qrtr_recvmsg,
.getname = qrtr_getname,
.ioctl = qrtr_ioctl,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.shutdown = sock_no_shutdown,
.setsockopt = sock_no_setsockopt,
.getsockopt = sock_no_getsockopt,
.socketpair = sock_no_socketpair,
.accept = rose_accept,
.getname = rose_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = rose_ioctl,
.listen = rose_listen,
.shutdown = sock_no_shutdown,
/*
* permit an RxRPC socket to be polled
*/
-static __poll_t rxrpc_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t rxrpc_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
struct rxrpc_sock *rx = rxrpc_sk(sk);
- __poll_t mask = 0;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
/* the socket is readable if there are any messages waiting on the Rx
* queue */
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = rxrpc_poll_mask,
+ .poll = rxrpc_poll,
.ioctl = sock_no_ioctl,
.listen = rxrpc_listen,
.shutdown = rxrpc_shutdown,
struct rhashtable_params filter_ht_params;
struct flow_dissector dissector;
struct list_head filters;
- struct rcu_head rcu;
+ struct rcu_work rwork;
struct list_head list;
};
return rhashtable_init(&head->ht, &mask_ht_params);
}
+static void fl_mask_free(struct fl_flow_mask *mask)
+{
+ rhashtable_destroy(&mask->ht);
+ kfree(mask);
+}
+
+static void fl_mask_free_work(struct work_struct *work)
+{
+ struct fl_flow_mask *mask = container_of(to_rcu_work(work),
+ struct fl_flow_mask, rwork);
+
+ fl_mask_free(mask);
+}
+
static bool fl_mask_put(struct cls_fl_head *head, struct fl_flow_mask *mask,
bool async)
{
return false;
rhashtable_remove_fast(&head->ht, &mask->ht_node, mask_ht_params);
- rhashtable_destroy(&mask->ht);
list_del_rcu(&mask->list);
if (async)
- kfree_rcu(mask, rcu);
+ tcf_queue_work(&mask->rwork, fl_mask_free_work);
else
- kfree(mask);
+ fl_mask_free(mask);
return true;
}
if (next_time == 0 || next_time > q->root.cl_cfmin)
next_time = q->root.cl_cfmin;
}
- WARN_ON(next_time == 0);
- qdisc_watchdog_schedule(&q->watchdog, next_time);
+ if (next_time)
+ qdisc_watchdog_schedule(&q->watchdog, next_time);
}
static int
/* Account for a different sized first fragment */
if (msg_len >= first_len) {
msg->can_delay = 0;
- SCTP_INC_STATS(sock_net(asoc->base.sk), SCTP_MIB_FRAGUSRMSGS);
+ if (msg_len > first_len)
+ SCTP_INC_STATS(sock_net(asoc->base.sk),
+ SCTP_MIB_FRAGUSRMSGS);
} else {
/* Which may be the only one... */
first_len = msg_len;
.socketpair = sock_no_socketpair,
.accept = inet_accept,
.getname = sctp_getname,
- .poll_mask = sctp_poll_mask,
+ .poll = sctp_poll,
.ioctl = inet6_ioctl,
.listen = sctp_inet_listen,
.shutdown = inet_shutdown,
.socketpair = sock_no_socketpair,
.accept = inet_accept,
.getname = inet_getname, /* Semantics are different. */
- .poll_mask = sctp_poll_mask,
+ .poll = sctp_poll,
.ioctl = inet_ioctl,
.listen = sctp_inet_listen,
.shutdown = inet_shutdown, /* Looks harmless. */
* here, again, by modeling the current TCP/UDP code. We don't have
* a good way to test with it yet.
*/
-__poll_t sctp_poll_mask(struct socket *sock, __poll_t events)
+__poll_t sctp_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
struct sctp_sock *sp = sctp_sk(sk);
__poll_t mask;
+ poll_wait(file, sk_sleep(sk), wait);
+
sock_rps_record_flow(sk);
/* A TCP-style listening socket becomes readable when the accept queue
return mask;
}
-static __poll_t smc_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t smc_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
__poll_t mask = 0;
if ((sk->sk_state == SMC_INIT) || smc->use_fallback) {
/* delegate to CLC child sock */
release_sock(sk);
- mask = smc->clcsock->ops->poll_mask(smc->clcsock, events);
+ mask = smc->clcsock->ops->poll(file, smc->clcsock, wait);
lock_sock(sk);
sk->sk_err = smc->clcsock->sk->sk_err;
if (sk->sk_err) {
}
}
} else {
+ if (sk->sk_state != SMC_CLOSED) {
+ release_sock(sk);
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ lock_sock(sk);
+ }
if (sk->sk_err)
mask |= EPOLLERR;
if ((sk->sk_shutdown == SHUTDOWN_MASK) ||
.socketpair = sock_no_socketpair,
.accept = smc_accept,
.getname = smc_getname,
- .poll_mask = smc_poll_mask,
+ .poll = smc_poll,
.ioctl = smc_ioctl,
.listen = smc_listen,
.shutdown = smc_shutdown,
static int sock_mmap(struct file *file, struct vm_area_struct *vma);
static int sock_close(struct inode *inode, struct file *file);
-static struct wait_queue_head *sock_get_poll_head(struct file *file,
- __poll_t events);
-static __poll_t sock_poll_mask(struct file *file, __poll_t);
-static __poll_t sock_poll(struct file *file, struct poll_table_struct *wait);
+static __poll_t sock_poll(struct file *file,
+ struct poll_table_struct *wait);
static long sock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_COMPAT
static long compat_sock_ioctl(struct file *file,
.llseek = no_llseek,
.read_iter = sock_read_iter,
.write_iter = sock_write_iter,
- .get_poll_head = sock_get_poll_head,
- .poll_mask = sock_poll_mask,
.poll = sock_poll,
.unlocked_ioctl = sock_ioctl,
#ifdef CONFIG_COMPAT
}
EXPORT_SYMBOL(sock_create_lite);
-static struct wait_queue_head *sock_get_poll_head(struct file *file,
- __poll_t events)
-{
- struct socket *sock = file->private_data;
-
- if (!sock->ops->poll_mask)
- return NULL;
- sock_poll_busy_loop(sock, events);
- return sk_sleep(sock->sk);
-}
-
-static __poll_t sock_poll_mask(struct file *file, __poll_t events)
-{
- struct socket *sock = file->private_data;
-
- /*
- * We need to be sure we are in sync with the socket flags modification.
- *
- * This memory barrier is paired in the wq_has_sleeper.
- */
- smp_mb();
-
- /* this socket can poll_ll so tell the system call */
- return sock->ops->poll_mask(sock, events) |
- (sk_can_busy_loop(sock->sk) ? POLL_BUSY_LOOP : 0);
-}
-
/* No kernel lock held - perfect */
static __poll_t sock_poll(struct file *file, poll_table *wait)
{
struct socket *sock = file->private_data;
- __poll_t events = poll_requested_events(wait), mask = 0;
-
- if (sock->ops->poll) {
- sock_poll_busy_loop(sock, events);
- mask = sock->ops->poll(file, sock, wait);
- } else if (sock->ops->poll_mask) {
- sock_poll_wait(file, sock_get_poll_head(file, events), wait);
- mask = sock->ops->poll_mask(sock, events);
- }
+ __poll_t events = poll_requested_events(wait);
- return mask | sock_poll_busy_flag(sock);
+ sock_poll_busy_loop(sock, events);
+ if (!sock->ops->poll)
+ return 0;
+ return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock);
}
static int sock_mmap(struct file *file, struct vm_area_struct *vma)
/* Lower sock lock held */
void strp_data_ready(struct strparser *strp)
{
- if (unlikely(strp->stopped))
+ if (unlikely(strp->stopped) || strp->paused)
return;
/* This check is needed to synchronize with do_strp_work.
return;
}
- if (strp->paused)
- return;
-
if (strp->need_bytes) {
if (strp_peek_len(strp) < strp->need_bytes)
return;
}
/**
- * tipc_poll - read pollmask
+ * tipc_poll - read and possibly block on pollmask
* @file: file structure associated with the socket
* @sock: socket for which to calculate the poll bits
+ * @wait: ???
*
* Returns pollmask value
*
* imply that the operation will succeed, merely that it should be performed
* and will not block.
*/
-static __poll_t tipc_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t tipc_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk;
struct tipc_sock *tsk = tipc_sk(sk);
__poll_t revents = 0;
+ sock_poll_wait(file, sk_sleep(sk), wait);
+
if (sk->sk_shutdown & RCV_SHUTDOWN)
revents |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM;
if (sk->sk_shutdown == SHUTDOWN_MASK)
.socketpair = tipc_socketpair,
.accept = sock_no_accept,
.getname = tipc_getname,
- .poll_mask = tipc_poll_mask,
+ .poll = tipc_poll,
.ioctl = tipc_ioctl,
.listen = sock_no_listen,
.shutdown = tipc_shutdown,
.socketpair = tipc_socketpair,
.accept = tipc_accept,
.getname = tipc_getname,
- .poll_mask = tipc_poll_mask,
+ .poll = tipc_poll,
.ioctl = tipc_ioctl,
.listen = tipc_listen,
.shutdown = tipc_shutdown,
.socketpair = tipc_socketpair,
.accept = tipc_accept,
.getname = tipc_getname,
- .poll_mask = tipc_poll_mask,
+ .poll = tipc_poll,
.ioctl = tipc_ioctl,
.listen = tipc_listen,
.shutdown = tipc_shutdown,
build_protos(tls_prots[TLSV4], &tcp_prot);
tls_sw_proto_ops = inet_stream_ops;
- tls_sw_proto_ops.poll_mask = tls_sw_poll_mask;
+ tls_sw_proto_ops.poll = tls_sw_poll;
tls_sw_proto_ops.splice_read = tls_sw_splice_read;
#ifdef CONFIG_TLS_DEVICE
return copied ? : err;
}
-__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events)
+unsigned int tls_sw_poll(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait)
{
+ unsigned int ret;
struct sock *sk = sock->sk;
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
- __poll_t mask;
- /* Grab EPOLLOUT and EPOLLHUP from the underlying socket */
- mask = ctx->sk_poll_mask(sock, events);
+ /* Grab POLLOUT and POLLHUP from the underlying socket */
+ ret = ctx->sk_poll(file, sock, wait);
- /* Clear EPOLLIN bits, and set based on recv_pkt */
- mask &= ~(EPOLLIN | EPOLLRDNORM);
+ /* Clear POLLIN bits, and set based on recv_pkt */
+ ret &= ~(POLLIN | POLLRDNORM);
if (ctx->recv_pkt)
- mask |= EPOLLIN | EPOLLRDNORM;
+ ret |= POLLIN | POLLRDNORM;
- return mask;
+ return ret;
}
static int tls_read_size(struct strparser *strp, struct sk_buff *skb)
sk->sk_data_ready = tls_data_ready;
write_unlock_bh(&sk->sk_callback_lock);
- sw_ctx_rx->sk_poll_mask = sk->sk_socket->ops->poll_mask;
+ sw_ctx_rx->sk_poll = sk->sk_socket->ops->poll;
strp_check_rcv(&sw_ctx_rx->strp);
}
static int unix_socketpair(struct socket *, struct socket *);
static int unix_accept(struct socket *, struct socket *, int, bool);
static int unix_getname(struct socket *, struct sockaddr *, int);
-static __poll_t unix_poll_mask(struct socket *, __poll_t);
-static __poll_t unix_dgram_poll_mask(struct socket *, __poll_t);
+static __poll_t unix_poll(struct file *, struct socket *, poll_table *);
+static __poll_t unix_dgram_poll(struct file *, struct socket *,
+ poll_table *);
static int unix_ioctl(struct socket *, unsigned int, unsigned long);
static int unix_shutdown(struct socket *, int);
static int unix_stream_sendmsg(struct socket *, struct msghdr *, size_t);
.socketpair = unix_socketpair,
.accept = unix_accept,
.getname = unix_getname,
- .poll_mask = unix_poll_mask,
+ .poll = unix_poll,
.ioctl = unix_ioctl,
.listen = unix_listen,
.shutdown = unix_shutdown,
.socketpair = unix_socketpair,
.accept = sock_no_accept,
.getname = unix_getname,
- .poll_mask = unix_dgram_poll_mask,
+ .poll = unix_dgram_poll,
.ioctl = unix_ioctl,
.listen = sock_no_listen,
.shutdown = unix_shutdown,
.socketpair = unix_socketpair,
.accept = unix_accept,
.getname = unix_getname,
- .poll_mask = unix_dgram_poll_mask,
+ .poll = unix_dgram_poll,
.ioctl = unix_ioctl,
.listen = unix_listen,
.shutdown = unix_shutdown,
return err;
}
-static __poll_t unix_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
- __poll_t mask = 0;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
/* exceptional events? */
if (sk->sk_err)
return mask;
}
-static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t unix_dgram_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
struct sock *sk = sock->sk, *other;
- int writable;
- __poll_t mask = 0;
+ unsigned int writable;
+ __poll_t mask;
+
+ sock_poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
/* exceptional events? */
if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue))
}
/* No write status requested, avoid expensive OUT tests. */
- if (!(events & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT)))
+ if (!(poll_requested_events(wait) & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT)))
return mask;
writable = unix_writable(sk);
return err;
}
-static __poll_t vsock_poll_mask(struct socket *sock, __poll_t events)
+static __poll_t vsock_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
{
- struct sock *sk = sock->sk;
- struct vsock_sock *vsk = vsock_sk(sk);
- __poll_t mask = 0;
+ struct sock *sk;
+ __poll_t mask;
+ struct vsock_sock *vsk;
+
+ sk = sock->sk;
+ vsk = vsock_sk(sk);
+
+ poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
if (sk->sk_err)
/* Signify that there has been an error on this socket. */
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = vsock_getname,
- .poll_mask = vsock_poll_mask,
+ .poll = vsock_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = vsock_shutdown,
.socketpair = sock_no_socketpair,
.accept = vsock_accept,
.getname = vsock_getname,
- .poll_mask = vsock_poll_mask,
+ .poll = vsock_poll,
.ioctl = sock_no_ioctl,
.listen = vsock_listen,
.shutdown = vsock_shutdown,
return -ENODEV;
}
- if (le32_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid)
+ if (le64_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid)
return virtio_transport_send_pkt_loopback(vsock, pkt);
if (pkt->reply)
.socketpair = sock_no_socketpair,
.accept = x25_accept,
.getname = x25_getname,
- .poll_mask = datagram_poll_mask,
+ .poll = datagram_poll,
.ioctl = x25_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_x25_ioctl,
return (xs->zc) ? xsk_zc_xmit(sk) : xsk_generic_xmit(sk, m, total_len);
}
-static __poll_t xsk_poll_mask(struct socket *sock, __poll_t events)
+static unsigned int xsk_poll(struct file *file, struct socket *sock,
+ struct poll_table_struct *wait)
{
- __poll_t mask = datagram_poll_mask(sock, events);
+ unsigned int mask = datagram_poll(file, sock, wait);
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
- .poll_mask = xsk_poll_mask,
+ .poll = xsk_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
"A patch subject line should describe the change not the tool that found it\n" . $herecurr);
}
-# Check for old stable address
- if ($line =~ /^\s*cc:\s*.*<?\bstable\@kernel\.org\b>?.*$/i) {
- ERROR("STABLE_ADDRESS",
- "The 'stable' address should be 'stable\@vger.kernel.org'\n" . $herecurr);
- }
-
# Check for unwanted Gerrit info
if ($in_commit_log && $line =~ /^\s*change-id:/i) {
ERROR("GERRIT_CHANGE_ID",
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
+echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
* config BAZ
* int "BAZ Value"
* range 1..255
+ *
+ * Please, also check zconf.y:print_symbol() when modifying the
+ * list of property types!
*/
enum prop_type {
P_UNKNOWN,
nread--;
/* remove trailing new lines */
- while (buf[nread - 1] == '\n')
+ while (nread > 0 && buf[nread - 1] == '\n')
nread--;
buf[nread] = 0;
static struct menu *current_menu, *current_entry;
%}
-%expect 32
+%expect 31
%union
{
/* if entry */
-if_entry: T_IF expr nl
+if_entry: T_IF expr T_EOL
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
menu_add_entry(NULL);
print_quoted_string(out, prop->text);
fputc('\n', out);
break;
+ case P_SYMBOL:
+ fputs( " symbol ", out);
+ fprintf(out, "%s\n", prop->sym->name);
+ break;
default:
fprintf(out, " unknown prop %d!\n", prop->type);
break;
* The src pointer is defined as Z || other info where Z is the shared secret
* from DH and other info is an arbitrary string (see SP800-56A section
* 5.8.1.2).
+ *
+ * 'dlen' must be a multiple of the digest size.
*/
static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen,
u8 *dst, unsigned int dlen, unsigned int zlen)
{
uint8_t *outbuf = NULL;
int ret;
- size_t outbuf_len = round_up(buflen,
- crypto_shash_digestsize(sdesc->shash.tfm));
+ size_t outbuf_len = roundup(buflen,
+ crypto_shash_digestsize(sdesc->shash.tfm));
outbuf = kmalloc(outbuf_len, GFP_KERNEL);
if (!outbuf) {
static ssize_t sel_read_policy(struct file *filp, char __user *buf,
size_t count, loff_t *ppos)
{
- struct selinux_fs_info *fsi = file_inode(filp)->i_sb->s_fs_info;
struct policy_load_memory *plm = filp->private_data;
int ret;
- mutex_lock(&fsi->mutex);
-
ret = avc_has_perm(&selinux_state,
current_sid(), SECINITSID_SECURITY,
SECCLASS_SECURITY, SECURITY__READ_POLICY, NULL);
if (ret)
- goto out;
+ return ret;
- ret = simple_read_from_buffer(buf, count, ppos, plm->data, plm->len);
-out:
- mutex_unlock(&fsi->mutex);
- return ret;
+ return simple_read_from_buffer(buf, count, ppos, plm->data, plm->len);
}
static vm_fault_t sel_mmap_policy_fault(struct vm_fault *vmf)
ret = -EINVAL;
if (index >= fsi->bool_num || strcmp(name,
fsi->bool_pending_names[index]))
- goto out;
+ goto out_unlock;
ret = -ENOMEM;
page = (char *)get_zeroed_page(GFP_KERNEL);
if (!page)
- goto out;
+ goto out_unlock;
cur_enforcing = security_get_bool_value(fsi->state, index);
if (cur_enforcing < 0) {
ret = cur_enforcing;
- goto out;
+ goto out_unlock;
}
length = scnprintf(page, PAGE_SIZE, "%d %d", cur_enforcing,
fsi->bool_pending_values[index]);
- ret = simple_read_from_buffer(buf, count, ppos, page, length);
-out:
mutex_unlock(&fsi->mutex);
+ ret = simple_read_from_buffer(buf, count, ppos, page, length);
+out_free:
free_page((unsigned long)page);
return ret;
+
+out_unlock:
+ mutex_unlock(&fsi->mutex);
+ goto out_free;
}
static ssize_t sel_write_bool(struct file *filep, const char __user *buf,
unsigned index = file_inode(filep)->i_ino & SEL_INO_MASK;
const char *name = filep->f_path.dentry->d_name.name;
+ if (count >= PAGE_SIZE)
+ return -ENOMEM;
+
+ /* No partial writes. */
+ if (*ppos != 0)
+ return -EINVAL;
+
+ page = memdup_user_nul(buf, count);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
mutex_lock(&fsi->mutex);
length = avc_has_perm(&selinux_state,
fsi->bool_pending_names[index]))
goto out;
- length = -ENOMEM;
- if (count >= PAGE_SIZE)
- goto out;
-
- /* No partial writes. */
- length = -EINVAL;
- if (*ppos != 0)
- goto out;
-
- page = memdup_user_nul(buf, count);
- if (IS_ERR(page)) {
- length = PTR_ERR(page);
- page = NULL;
- goto out;
- }
-
length = -EINVAL;
if (sscanf(page, "%d", &new_value) != 1)
goto out;
ssize_t length;
int new_value;
+ if (count >= PAGE_SIZE)
+ return -ENOMEM;
+
+ /* No partial writes. */
+ if (*ppos != 0)
+ return -EINVAL;
+
+ page = memdup_user_nul(buf, count);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
mutex_lock(&fsi->mutex);
length = avc_has_perm(&selinux_state,
if (length)
goto out;
- length = -ENOMEM;
- if (count >= PAGE_SIZE)
- goto out;
-
- /* No partial writes. */
- length = -EINVAL;
- if (*ppos != 0)
- goto out;
-
- page = memdup_user_nul(buf, count);
- if (IS_ERR(page)) {
- length = PTR_ERR(page);
- page = NULL;
- goto out;
- }
-
length = -EINVAL;
if (sscanf(page, "%d", &new_value) != 1)
goto out;
struct smack_known *skp = smk_of_task_struct(p);
isp->smk_inode = skp;
+ isp->smk_flags |= SMK_INODE_INSTANT;
}
/*
struct snd_seq_client *cptr = NULL;
/* search for next client */
- info->client++;
+ if (info->client < INT_MAX)
+ info->client++;
if (info->client < 0)
info->client = 0;
for (; info->client < SNDRV_SEQ_MAX_CLIENTS; info->client++) {
} else {
if (id.subdevice < 0)
id.subdevice = 0;
- else
+ else if (id.subdevice < INT_MAX)
id.subdevice++;
}
}
list_for_each_entry(pcm, &codec->pcm_list_head, list)
snd_pcm_suspend_all(pcm->pcm);
state = hda_call_codec_suspend(codec);
- if (codec_has_clkstop(codec) && codec_has_epss(codec) &&
- (state & AC_PWRST_CLK_STOP_OK))
+ if (codec->link_down_at_suspend ||
+ (codec_has_clkstop(codec) && codec_has_epss(codec) &&
+ (state & AC_PWRST_CLK_STOP_OK)))
snd_hdac_codec_link_down(&codec->core);
snd_hdac_link_power(&codec->core, false);
return 0;
unsigned int power_save_node:1; /* advanced PM for each widget */
unsigned int auto_runtime_pm:1; /* enable automatic codec runtime pm */
unsigned int force_pin_prefix:1; /* Add location prefix */
+ unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
#ifdef CONFIG_PM
unsigned long power_on_acct;
unsigned long power_off_acct;
enum {
QUIRK_NONE,
QUIRK_ALIENWARE,
+ QUIRK_ALIENWARE_M17XR4,
QUIRK_SBZ,
QUIRK_R3DI,
};
};
static const struct snd_pci_quirk ca0132_quirks[] = {
+ SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4),
SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
* I think this has to do with the pin for rear surround being 0x11,
* and the center/lfe being 0x10. Usually the pin order is the opposite.
*/
-const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = {
+static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = {
{ .channels = 2,
.map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } },
{ .channels = 4,
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
/* With the DSP enabled, desktops don't use this ADC. */
- if (spec->use_alt_functions) {
+ if (!spec->use_alt_functions) {
info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2");
if (!info)
return -ENOMEM;
* Bit 6: set to select Data2, clear for Data1
* Bit 7: set to enable DMic, clear for AMic
*/
- val = 0x23;
+ if (spec->quirk == QUIRK_ALIENWARE_M17XR4)
+ val = 0x33;
+ else
+ val = 0x23;
/* keep a copy of dmic ctl val for enable/disable dmic purpuse */
spec->dmic_ctl = val;
snd_hda_codec_write(codec, spec->input_pins[0], 0,
snd_hda_sequence_write(codec, spec->base_init_verbs);
- if (spec->quirk != QUIRK_NONE)
+ if (spec->use_alt_functions)
ca0132_alt_init(codec);
ca0132_download_dsp(codec);
case QUIRK_R3DI:
r3di_setup_defaults(codec);
break;
- case QUIRK_NONE:
- case QUIRK_ALIENWARE:
+ case QUIRK_SBZ:
+ break;
+ default:
ca0132_setup_defaults(codec);
ca0132_init_analog_mic2(codec);
ca0132_init_dmic(codec);
static void ca0132_config(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
- struct auto_pin_cfg *cfg = &spec->autocfg;
spec->dacs[0] = 0x2;
spec->dacs[1] = 0x3;
/* SPDIF I/O */
spec->dig_out = 0x05;
spec->multiout.dig_out_nid = spec->dig_out;
- cfg->dig_out_pins[0] = 0x0c;
- cfg->dig_outs = 1;
- cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF;
spec->dig_in = 0x09;
- cfg->dig_in_pin = 0x0e;
- cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
break;
case QUIRK_R3DI:
codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__);
/* SPDIF I/O */
spec->dig_out = 0x05;
spec->multiout.dig_out_nid = spec->dig_out;
- cfg->dig_out_pins[0] = 0x0c;
- cfg->dig_outs = 1;
- cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF;
break;
default:
spec->num_outputs = 2;
/* SPDIF I/O */
spec->dig_out = 0x05;
spec->multiout.dig_out_nid = spec->dig_out;
- cfg->dig_out_pins[0] = 0x0c;
- cfg->dig_outs = 1;
- cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF;
spec->dig_in = 0x09;
- cfg->dig_in_pin = 0x0e;
- cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
break;
}
}
static int ca0132_prepare_verbs(struct hda_codec *codec)
{
/* Verbs + terminator (an empty element) */
-#define NUM_SPEC_VERBS 4
+#define NUM_SPEC_VERBS 2
struct ca0132_spec *spec = codec->spec;
spec->chip_init_verbs = ca0132_init_verbs0;
if (!spec->spec_init_verbs)
return -ENOMEM;
- /* HP jack autodetection */
- spec->spec_init_verbs[0].nid = spec->unsol_tag_hp;
- spec->spec_init_verbs[0].param = AC_VERB_SET_UNSOLICITED_ENABLE;
- spec->spec_init_verbs[0].verb = AC_USRSP_EN | spec->unsol_tag_hp;
-
- /* MIC1 jack autodetection */
- spec->spec_init_verbs[1].nid = spec->unsol_tag_amic1;
- spec->spec_init_verbs[1].param = AC_VERB_SET_UNSOLICITED_ENABLE;
- spec->spec_init_verbs[1].verb = AC_USRSP_EN | spec->unsol_tag_amic1;
-
/* config EAPD */
- spec->spec_init_verbs[2].nid = 0x0b;
- spec->spec_init_verbs[2].param = 0x78D;
- spec->spec_init_verbs[2].verb = 0x00;
+ spec->spec_init_verbs[0].nid = 0x0b;
+ spec->spec_init_verbs[0].param = 0x78D;
+ spec->spec_init_verbs[0].verb = 0x00;
/* Previously commented configuration */
/*
- spec->spec_init_verbs[3].nid = 0x0b;
- spec->spec_init_verbs[3].param = AC_VERB_SET_EAPD_BTLENABLE;
+ spec->spec_init_verbs[2].nid = 0x0b;
+ spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE;
+ spec->spec_init_verbs[2].verb = 0x02;
+
+ spec->spec_init_verbs[3].nid = 0x10;
+ spec->spec_init_verbs[3].param = 0x78D;
spec->spec_init_verbs[3].verb = 0x02;
spec->spec_init_verbs[4].nid = 0x10;
- spec->spec_init_verbs[4].param = 0x78D;
+ spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE;
spec->spec_init_verbs[4].verb = 0x02;
-
- spec->spec_init_verbs[5].nid = 0x10;
- spec->spec_init_verbs[5].param = AC_VERB_SET_EAPD_BTLENABLE;
- spec->spec_init_verbs[5].verb = 0x02;
*/
/* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */
spec->chmap.channels_max = max(spec->chmap.channels_max, 8u);
+ /* AMD GPUs have neither EPSS nor CLKSTOP bits, hence preventing
+ * the link-down as is. Tell the core to allow it.
+ */
+ codec->link_down_at_suspend = 1;
+
return 0;
}
SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu Lifebook S7110", ALC262_FIXUP_FSC_S7110),
SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ),
SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN),
+ SND_PCI_QUIRK(0x1734, 0x1141, "FSC ESPRIMO U9210", ALC262_FIXUP_FSC_H270),
SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270),
SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000),
SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ),
struct alc_spec *spec = codec->spec;
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
- spec->shutup = alc_no_shutup; /* reduce click noise */
spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
codec->power_save_node = 0; /* avoid click noises */
/* for hda_fixup_thinkpad_acpi() */
#include "thinkpad_helper.c"
+static void alc_fixup_thinkpad_acpi(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ alc_fixup_no_shutup(codec, fix, action); /* reduce click noise */
+ hda_fixup_thinkpad_acpi(codec, fix, action);
+}
+
/* for dell wmi mic mute led */
#include "dell_wmi_helper.c"
},
[ALC269_FIXUP_THINKPAD_ACPI] = {
.type = HDA_FIXUP_FUNC,
- .v.func = hda_fixup_thinkpad_acpi,
+ .v.func = alc_fixup_thinkpad_acpi,
.chained = true,
.chain_id = ALC269_FIXUP_SKU_IGNORE,
},
SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
+ SND_PCI_QUIRK(0x17aa, 0x312a, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
SND_PCI_QUIRK(0x17aa, 0x312f, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
- SND_PCI_QUIRK(0x17aa, 0x3138, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
+ SND_PCI_QUIRK(0x17aa, 0x3136, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
{0x14, 0x90170110},
{0x19, 0x02a11030},
{0x21, 0x02211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0235, 0x17aa, "Lenovo", ALC294_FIXUP_LENOVO_MIC_LOCATION,
+ {0x14, 0x90170110},
+ {0x19, 0x02a11030},
+ {0x1a, 0x02a11040},
+ {0x1b, 0x01014020},
+ {0x21, 0x0221101f}),
SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
{0x12, 0x90a60140},
{0x14, 0x90170110},
chip->port_dsp_bar = pci_ioremap_bar(pci, 2);
if (!chip->port_dsp_bar) {
dev_err(card->dev, "cannot remap PCI memory region\n");
+ err = -ENOMEM;
goto remap_pci_failed;
}
#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
#define KVM_VGIC_ITS_ADDR_TYPE 4
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5
#define KVM_VGIC_V3_DIST_SIZE SZ_64K
#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
#define KVM_VGIC_ITS_ADDR_TYPE 4
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5
#define KVM_VGIC_V3_DIST_SIZE SZ_64K
#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd)
#define KVM_REG_PPC_DEC_EXPIRY (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe)
+#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf)
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
#define __NR_pkey_alloc 384
#define __NR_pkey_free 385
#define __NR_pkey_mprotect 386
+#define __NR_rseq 387
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
#define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */
#define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */
#define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */
#define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */
+#define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
/* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */
#define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */
*/
#define DRM_CLIENT_CAP_ATOMIC 3
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO 4
+
/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
struct drm_set_client_cap {
__u64 capability;
union {
/* inputs to lookup */
__u8 tos; /* AF_INET */
- __be32 flowlabel; /* AF_INET6 */
+ __be32 flowinfo; /* AF_INET6, flow_label + priority */
/* output: metric of fib result (IPv4/IPv6 only) */
__u32 rt_metric;
IFLA_BRPORT_BCAST_FLOOD,
IFLA_BRPORT_GROUP_FWD_MASK,
IFLA_BRPORT_NEIGH_SUPPRESS,
+ IFLA_BRPORT_ISOLATED,
__IFLA_BRPORT_MAX
};
#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
IFLA_VXLAN_COLLECT_METADATA,
IFLA_VXLAN_LABEL,
IFLA_VXLAN_GPE,
+ IFLA_VXLAN_TTL_INHERIT,
__IFLA_VXLAN_MAX
};
#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
#define KVM_CAP_S390_BPB 152
#define KVM_CAP_GET_MSR_FEATURES 153
#define KVM_CAP_HYPERV_EVENTFD 154
+#define KVM_CAP_HYPERV_TLBFLUSH 155
#ifdef KVM_CAP_IRQ_ROUTING
u64 ip;
u64 skip_slot = -1;
- if (chain->nr < 3)
+ if (!chain || chain->nr < 3)
return skip_slot;
ip = chain->ips[2];
330 common pkey_alloc __x64_sys_pkey_alloc
331 common pkey_free __x64_sys_pkey_free
332 common statx __x64_sys_statx
+333 common io_pgetevents __x64_sys_io_pgetevents
+334 common rseq __x64_sys_rseq
#
# x32-specific system call numbers start at 512 to avoid cache impact
u8 *global_data;
u8 *process_data;
u8 *thread_data;
- u64 bytes_done;
+ u64 bytes_done, secs;
long work_done;
u32 l;
struct rusage rusage;
timersub(&stop, &start0, &diff);
td->runtime_ns = diff.tv_sec * NSEC_PER_SEC;
td->runtime_ns += diff.tv_usec * NSEC_PER_USEC;
- td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9;
+ secs = td->runtime_ns / NSEC_PER_SEC;
+ td->speed_gbs = secs ? bytes_done / secs / 1e9 : 0;
getrusage(RUSAGE_THREAD, &rusage);
td->system_time_ns = rusage.ru_stime.tv_sec * NSEC_PER_SEC;
return ret;
}
+static int process_feature_event(struct perf_tool *tool,
+ union perf_event *event,
+ struct perf_session *session)
+{
+ if (event->feat.feat_id < HEADER_LAST_FEATURE)
+ return perf_event__process_feature(tool, event, session);
+ return 0;
+}
+
static int hist_entry__tty_annotate(struct hist_entry *he,
struct perf_evsel *evsel,
struct perf_annotate *ann)
.attr = perf_event__process_attr,
.build_id = perf_event__process_build_id,
.tracing_data = perf_event__process_tracing_data,
- .feature = perf_event__process_feature,
+ .feature = process_feature_event,
.ordered_events = true,
.ordering_requires_timestamps = true,
},
}
/*
- * All features are received, we can force the
+ * (feat_id = HEADER_LAST_FEATURE) is the end marker which
+ * means all features are received, now we can force the
* group if needed.
*/
setup_forced_leader(rep, session->evlist);
struct perf_evlist *evlist;
struct perf_evsel *evsel, *pos;
int err;
+ static struct perf_evsel_script *es;
err = perf_event__process_attr(tool, event, pevlist);
if (err)
evlist = *pevlist;
evsel = perf_evlist__last(*pevlist);
+ if (!evsel->priv) {
+ if (scr->per_event_dump) {
+ evsel->priv = perf_evsel_script__new(evsel,
+ scr->session->data);
+ } else {
+ es = zalloc(sizeof(*es));
+ if (!es)
+ return -ENOMEM;
+ es->fp = stdout;
+ evsel->priv = es;
+ }
+ }
+
if (evsel->attr.type >= PERF_TYPE_MAX &&
evsel->attr.type != PERF_TYPE_SYNTH)
return 0;
return set_maps(script);
}
+static int process_feature_event(struct perf_tool *tool,
+ union perf_event *event,
+ struct perf_session *session)
+{
+ if (event->feat.feat_id < HEADER_LAST_FEATURE)
+ return perf_event__process_feature(tool, event, session);
+ return 0;
+}
+
#ifdef HAVE_AUXTRACE_SUPPORT
static int perf_script__process_auxtrace_info(struct perf_tool *tool,
union perf_event *event,
.attr = process_attr,
.event_update = perf_event__process_event_update,
.tracing_data = perf_event__process_tracing_data,
- .feature = perf_event__process_feature,
+ .feature = process_feature_event,
.build_id = perf_event__process_build_id,
.id_index = perf_event__process_id_index,
.auxtrace_info = perf_script__process_auxtrace_info,
"+field to add and -field to remove."
"Valid types: hw,sw,trace,raw,synth. "
"Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,"
- "addr,symoff,period,iregs,uregs,brstack,brstacksym,flags,"
- "bpf-output,callindent,insn,insnlen,brstackinsn,synth,phys_addr",
+ "addr,symoff,srcline,period,iregs,uregs,brstack,"
+ "brstacksym,flags,bpf-output,brstackinsn,brstackoff,"
+ "callindent,insn,insnlen,synth,phys_addr,metric,misc",
parse_output_fields),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
return 0;
}
+static bool test__intel_pt_valid(void)
+{
+ return !!perf_pmu__find("intel_pt");
+}
+
static int test__intel_pt(struct perf_evlist *evlist)
{
struct perf_evsel *evsel = perf_evlist__first(evlist);
const char *name;
__u32 type;
const int id;
+ bool (*valid)(void);
int (*check)(struct perf_evlist *evlist);
};
},
{
.name = "intel_pt//u",
+ .valid = test__intel_pt_valid,
.check = test__intel_pt,
.id = 52,
},
static int test_event(struct evlist_test *e)
{
+ struct parse_events_error err = { .idx = 0, };
struct perf_evlist *evlist;
int ret;
+ if (e->valid && !e->valid()) {
+ pr_debug("... SKIP");
+ return 0;
+ }
+
evlist = perf_evlist__new();
if (evlist == NULL)
return -ENOMEM;
- ret = parse_events(evlist, e->name, NULL);
+ ret = parse_events(evlist, e->name, &err);
if (ret) {
- pr_debug("failed to parse event '%s', err %d\n",
- e->name, ret);
+ pr_debug("failed to parse event '%s', err %d, str '%s'\n",
+ e->name, ret, err.str);
+ parse_events_print_error(&err, e->name);
} else {
ret = e->check(evlist);
}
for (i = 0; i < cnt; i++) {
struct evlist_test *e = &events[i];
- pr_debug("running test %d '%s'\n", e->id, e->name);
+ pr_debug("running test %d '%s'", e->id, e->name);
ret1 = test_event(e);
if (ret1)
ret2 = ret1;
+ pr_debug("\n");
}
return ret2;
}
while (!ret && (ent = readdir(dir))) {
- struct evlist_test e;
+ struct evlist_test e = { .id = 0, };
char name[2 * NAME_MAX + 1 + 12 + 3];
/* Names containing . are special and cannot be used directly */
perf_header__set_feat(&session->header, HEADER_CPU_TOPOLOGY);
perf_header__set_feat(&session->header, HEADER_NRCPUS);
+ perf_header__set_feat(&session->header, HEADER_ARCH);
session->header.data_size += DATA_SIZE;
raw_svector_ostream ostream(*Buffer);
legacy::PassManager PM;
- if (TargetMachine->addPassesToEmitFile(PM, ostream,
- TargetMachine::CGFT_ObjectFile)) {
+ bool NotAdded;
+#if CLANG_VERSION_MAJOR < 7
+ NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream,
+ TargetMachine::CGFT_ObjectFile);
+#else
+ NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, nullptr,
+ TargetMachine::CGFT_ObjectFile);
+#endif
+ if (NotAdded) {
llvm::errs() << "TargetMachine can't emit a file of this type\n";
return std::unique_ptr<llvm::SmallVectorImpl<char>>(nullptr);;
}
int cpu_nr = ff->ph->env.nr_cpus_avail;
u64 size = 0;
struct perf_header *ph = ff->ph;
+ bool do_core_id_test = true;
ph->env.cpu = calloc(cpu_nr, sizeof(*ph->env.cpu));
if (!ph->env.cpu)
return 0;
}
+ /* On s390 the socket_id number is not related to the numbers of cpus.
+ * The socket_id number might be higher than the numbers of cpus.
+ * This depends on the configuration.
+ */
+ if (ph->env.arch && !strncmp(ph->env.arch, "s390", 4))
+ do_core_id_test = false;
+
for (i = 0; i < (u32)cpu_nr; i++) {
if (do_read_u32(ff, &nr))
goto free_cpu;
if (do_read_u32(ff, &nr))
goto free_cpu;
- if (nr != (u32)-1 && nr > (u32)cpu_nr) {
+ if (do_core_id_test && nr != (u32)-1 && nr > (u32)cpu_nr) {
pr_debug("socket_id number is too big."
"You may need to upgrade the perf tool.\n");
goto free_cpu;
pr_warning("invalid record type %d in pipe-mode\n", type);
return 0;
}
- if (feat == HEADER_RESERVED || feat > HEADER_LAST_FEATURE) {
+ if (feat == HEADER_RESERVED || feat >= HEADER_LAST_FEATURE) {
pr_warning("invalid record type %d in pipe-mode\n", type);
return -1;
}
if (len < offs)
return INTEL_PT_NEED_MORE_BYTES;
byte = buf[offs++];
- payload |= (byte >> 1) << shift;
+ payload |= ((uint64_t)byte >> 1) << shift;
}
packet->type = INTEL_PT_CYC;
return 0;
}
+static void perf_pmu_assign_str(char *name, const char *field, char **old_str,
+ char **new_str)
+{
+ if (!*old_str)
+ goto set_new;
+
+ if (*new_str) { /* Have new string, check with old */
+ if (strcasecmp(*old_str, *new_str))
+ pr_debug("alias %s differs in field '%s'\n",
+ name, field);
+ zfree(old_str);
+ } else /* Nothing new --> keep old string */
+ return;
+set_new:
+ *old_str = *new_str;
+ *new_str = NULL;
+}
+
+static void perf_pmu_update_alias(struct perf_pmu_alias *old,
+ struct perf_pmu_alias *newalias)
+{
+ perf_pmu_assign_str(old->name, "desc", &old->desc, &newalias->desc);
+ perf_pmu_assign_str(old->name, "long_desc", &old->long_desc,
+ &newalias->long_desc);
+ perf_pmu_assign_str(old->name, "topic", &old->topic, &newalias->topic);
+ perf_pmu_assign_str(old->name, "metric_expr", &old->metric_expr,
+ &newalias->metric_expr);
+ perf_pmu_assign_str(old->name, "metric_name", &old->metric_name,
+ &newalias->metric_name);
+ perf_pmu_assign_str(old->name, "value", &old->str, &newalias->str);
+ old->scale = newalias->scale;
+ old->per_pkg = newalias->per_pkg;
+ old->snapshot = newalias->snapshot;
+ memcpy(old->unit, newalias->unit, sizeof(old->unit));
+}
+
+/* Delete an alias entry. */
+static void perf_pmu_free_alias(struct perf_pmu_alias *newalias)
+{
+ zfree(&newalias->name);
+ zfree(&newalias->desc);
+ zfree(&newalias->long_desc);
+ zfree(&newalias->topic);
+ zfree(&newalias->str);
+ zfree(&newalias->metric_expr);
+ zfree(&newalias->metric_name);
+ parse_events_terms__purge(&newalias->terms);
+ free(newalias);
+}
+
+/* Merge an alias, search in alias list. If this name is already
+ * present merge both of them to combine all information.
+ */
+static bool perf_pmu_merge_alias(struct perf_pmu_alias *newalias,
+ struct list_head *alist)
+{
+ struct perf_pmu_alias *a;
+
+ list_for_each_entry(a, alist, list) {
+ if (!strcasecmp(newalias->name, a->name)) {
+ perf_pmu_update_alias(a, newalias);
+ perf_pmu_free_alias(newalias);
+ return true;
+ }
+ }
+ return false;
+}
+
static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name,
char *desc, char *val,
char *long_desc, char *topic,
char *metric_expr,
char *metric_name)
{
+ struct parse_events_term *term;
struct perf_pmu_alias *alias;
int ret;
int num;
+ char newval[256];
alias = malloc(sizeof(*alias));
if (!alias)
return ret;
}
+ /* Scan event and remove leading zeroes, spaces, newlines, some
+ * platforms have terms specified as
+ * event=0x0091 (read from files ../<PMU>/events/<FILE>
+ * and terms specified as event=0x91 (read from JSON files).
+ *
+ * Rebuild string to make alias->str member comparable.
+ */
+ memset(newval, 0, sizeof(newval));
+ ret = 0;
+ list_for_each_entry(term, &alias->terms, list) {
+ if (ret)
+ ret += scnprintf(newval + ret, sizeof(newval) - ret,
+ ",");
+ if (term->type_val == PARSE_EVENTS__TERM_TYPE_NUM)
+ ret += scnprintf(newval + ret, sizeof(newval) - ret,
+ "%s=%#x", term->config, term->val.num);
+ else if (term->type_val == PARSE_EVENTS__TERM_TYPE_STR)
+ ret += scnprintf(newval + ret, sizeof(newval) - ret,
+ "%s=%s", term->config, term->val.str);
+ }
+
alias->name = strdup(name);
if (dir) {
/*
snprintf(alias->unit, sizeof(alias->unit), "%s", unit);
}
alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1;
- alias->str = strdup(val);
+ alias->str = strdup(newval);
- list_add_tail(&alias->list, list);
+ if (!perf_pmu_merge_alias(alias, list))
+ list_add_tail(&alias->list, list);
return 0;
}
buf[ret] = 0;
+ /* Remove trailing newline from sysfs file */
+ rtrim(buf);
+
return __perf_pmu__new_alias(list, dir, name, NULL, buf, NULL, NULL, NULL,
NULL, NULL, NULL);
}
udpgso
udpgso_bench_rx
udpgso_bench_tx
+tcp_inq
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_DUMMY=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
*/
for (int i = 0; i < NGREG; i++) {
greg_t req = requested_regs[i], res = resulting_regs[i];
+
if (i == REG_TRAPNO || i == REG_IP)
continue; /* don't care */
- if (i == REG_SP) {
- printf("\tSP: %llx -> %llx\n", (unsigned long long)req,
- (unsigned long long)res);
+ if (i == REG_SP) {
/*
- * In many circumstances, the high 32 bits of rsp
- * are zeroed. For example, we could be a real
- * 32-bit program, or we could hit any of a number
- * of poorly-documented IRET or segmented ESP
- * oddities. If this happens, it's okay.
+ * If we were using a 16-bit stack segment, then
+ * the kernel is a bit stuck: IRET only restores
+ * the low 16 bits of ESP/RSP if SS is 16-bit.
+ * The kernel uses a hack to restore bits 31:16,
+ * but that hack doesn't help with bits 63:32.
+ * On Intel CPUs, bits 63:32 end up zeroed, and, on
+ * AMD CPUs, they leak the high bits of the kernel
+ * espfix64 stack pointer. There's very little that
+ * the kernel can do about it.
+ *
+ * Similarly, if we are returning to a 32-bit context,
+ * the CPU will often lose the high 32 bits of RSP.
*/
- if (res == (req & 0xFFFFFFFF))
- continue; /* OK; not expected to work */
+
+ if (res == req)
+ continue;
+
+ if (cs_bits != 64 && ((res ^ req) & 0xFFFFFFFF) == 0) {
+ printf("[NOTE]\tSP: %llx -> %llx\n",
+ (unsigned long long)req,
+ (unsigned long long)res);
+ continue;
+ }
+
+ printf("[FAIL]\tSP mismatch: requested 0x%llx; got 0x%llx\n",
+ (unsigned long long)requested_regs[i],
+ (unsigned long long)resulting_regs[i]);
+ nerrs++;
+ continue;
}
bool ignore_reg = false;
#endif
/* Sanity check on the kernel */
- if (i == REG_CX && requested_regs[i] != resulting_regs[i]) {
+ if (i == REG_CX && req != res) {
printf("[FAIL]\tCX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n",
- (unsigned long long)requested_regs[i],
- (unsigned long long)resulting_regs[i]);
+ (unsigned long long)req,
+ (unsigned long long)res);
nerrs++;
continue;
}
- if (requested_regs[i] != resulting_regs[i] && !ignore_reg) {
- /*
- * SP is particularly interesting here. The
- * usual cause of failures is that we hit the
- * nasty IRET case of returning to a 16-bit SS,
- * in which case bits 16:31 of the *kernel*
- * stack pointer persist in ESP.
- */
+ if (req != res && !ignore_reg) {
printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n",
- i, (unsigned long long)requested_regs[i],
- (unsigned long long)resulting_regs[i]);
+ i, (unsigned long long)req,
+ (unsigned long long)res);
nerrs++;
}
}
*/
BUG_ON((unsigned long) page & 0x03);
#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
BUG_ON(sg_is_chain(sg));
#endif
sg->page_link = page_link | (unsigned long) page;
static inline struct page *sg_page(struct scatterlist *sg)
{
#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
BUG_ON(sg_is_chain(sg));
#endif
return (struct page *)((sg)->page_link & ~0x3);
**/
static inline void sg_mark_end(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
/*
* Set termination bit, clear potential chain bit
*/
**/
static inline void sg_unmark_end(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
sg->page_link &= ~0x02;
}
static inline struct scatterlist *sg_next(struct scatterlist *sg)
{
-#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
if (sg_is_last(sg))
return NULL;
static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents)
{
memset(sgl, 0, sizeof(*sgl) * nents);
-#ifdef CONFIG_DEBUG_SG
- {
- unsigned int i;
- for (i = 0; i < nents; i++)
- sgl[i].sg_magic = SG_MAGIC;
- }
-#endif
sg_mark_end(&sgl[nents - 1]);
}
projects / linux-2.6-microblaze.git / commitdiff