for (n = 0; n < microlen; n++) {
bits = micro[n];
- for ( i = 0 ; i < 8 ; i++ ) {
+ for (i = 0 ; i < 8 ; i++) {
gpio_bits(BTTV_ALT_DCLK,0);
if (bits & 0x01)
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
/* this might be an antique... check for MMAC label in eeprom */
if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
unsigned char checksum = 0;
- for (i =0; i<21; i++)
+ for (i = 0; i < 21; i++)
checksum += ee[i];
if (checksum != ee[21])
return;
unsigned short type;
int offset = 4*16;
- for(; offset < 8*16; offset += 16) {
+ for (; offset < 8*16; offset += 16) {
unsigned short checksum = 0;
/* verify the checksum */
- for(i = 0; i<14; i++) checksum += ee[i+offset];
- checksum = ~checksum; /* no idea why */
- if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
+ for (i = 0; i < 14; i++)
+ checksum += ee[i+offset];
+ checksum = ~checksum; /* no idea why */
+ if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
((checksum & 0x0FF) == ee[offset+15])) {
break;
}
type = (ee[offset+4]<<8) | (ee[offset+5]);
switch(type) {
-
/* 848 based */
case 0x0004:
btv->c.type = BTTV_BOARD_OSPREY1x0_848;
}
dprintk("bttv%d: tea5757:",btv->c.nr);
- for(i = 0; i < 24; i++)
- {
+ for (i = 0; i < 24; i++) {
udelay(5);
bus_high(btv,btv->mbox_clk);
udelay(5);
dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
bus_low(btv,btv->mbox_clk);
bus_high(btv,btv->mbox_we);
- for(i = 0; i < 25; i++)
- {
+ for (i = 0; i < 25; i++) {
if (reg & 0x1000000)
bus_high(btv,btv->mbox_data);
else
gpio_write(1 << 9); /* reset MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
- for (ix=0; ix<4; ix++) {
+ for (ix = 0; ix < 4; ix++) {
sw_status[ix] = ix;
kodicom4400r_write(btv, ix, ix, 1);
}