NAPI: kconfig prompt and deleted doc file

- make the kconfig NAPI option prompt consistent across all net drivers
  (other than EXPERIMENTAL; can it now be removed also, or is the new
  napi_struct implementation now EXPERIMENTAL ?)
- remove comment about the now-deleted NAPI_HOWTO.txt file
- clean up typos in Tulip NAPI & Interrupt Mitigation

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 83d52c8..1a92dc6 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1293,9 +1293,6 @@ config PCNET32_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config AMD8111_ETH
@@ -1313,7 +1310,7 @@ config AMD8111_ETH
          will be called amd8111e.
 
 config AMD8111E_NAPI
-       bool "Enable NAPI support"
+       bool "Use RX polling (NAPI)"
        depends on AMD8111_ETH
        help
          NAPI is a new driver API designed to reduce CPU and interrupt load
@@ -1324,9 +1321,6 @@ config AMD8111E_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config ADAPTEC_STARFIRE
@@ -1355,9 +1349,6 @@ config ADAPTEC_STARFIRE_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config AC3200
@@ -1431,7 +1422,7 @@ config FORCEDETH
          called forcedeth.
 
 config FORCEDETH_NAPI
-       bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+       bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
        depends on FORCEDETH && EXPERIMENTAL
        help
          NAPI is a new driver API designed to reduce CPU and interrupt load
@@ -1442,9 +1433,6 @@ config FORCEDETH_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config CS89x0
@@ -1756,9 +1744,6 @@ config VIA_RHINE_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
 config LAN_SAA9730
        bool "Philips SAA9730 Ethernet support"
        depends on NET_PCI && PCI && MIPS_ATLAS
@@ -2003,9 +1988,6 @@ config E1000_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config E1000_DISABLE_PACKET_SPLIT
@@ -2099,7 +2081,7 @@ config R8169
          will be called r8169.  This is recommended.
 
 config R8169_NAPI
-       bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+       bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
        depends on R8169 && EXPERIMENTAL
        help
          NAPI is a new driver API designed to reduce CPU and interrupt load
@@ -2110,9 +2092,6 @@ config R8169_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config R8169_VLAN
@@ -2364,7 +2343,7 @@ config GIANFAR
          and MPC86xx family of chips, and the FEC on the 8540.
 
 config GFAR_NAPI
-       bool "NAPI Support"
+       bool "Use Rx Polling (NAPI)"
        depends on GIANFAR
 
 config UCC_GETH
@@ -2376,7 +2355,7 @@ config UCC_GETH
          which is available on some Freescale SOCs.
 
 config UGETH_NAPI
-       bool "NAPI Support"
+       bool "Use Rx Polling (NAPI)"
        depends on UCC_GETH
 
 config UGETH_MAGIC_PACKET
@@ -2559,9 +2538,6 @@ config IXGB_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config S2IO
@@ -2584,9 +2560,6 @@ config S2IO_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config MYRI10GE

diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 1c537d5..49d7a29 100644 (file)
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -67,7 +67,7 @@ config TULIP_MMIO
          If in doubt, say N.
 
 config TULIP_NAPI
-       bool "Use NAPI RX polling "
+       bool "Use RX polling (NAPI)"
        depends on TULIP
        help
          NAPI is a new driver API designed to reduce CPU and interrupt load
@@ -78,18 +78,16 @@ config TULIP_NAPI
          deployed on potentially unfriendly networks (e.g. in a firewall),
          then say Y here.
 
-         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-         information.
-
          If in doubt, say N.
 
 config TULIP_NAPI_HW_MITIGATION
-       bool "Use Interrupt Mitigation "
+       bool "Use Interrupt Mitigation"
        depends on TULIP_NAPI
        ---help---
-         Use HW to reduce RX interrupts. Not strict necessary since NAPI reduces
-         RX interrupts but itself. Although this reduces RX interrupts even at
-         low levels traffic at the cost of a small latency.
+         Use HW to reduce RX interrupts. Not strictly necessary since NAPI
+         reduces RX interrupts by itself. Interrupt mitigation reduces RX
+         interrupts even at low levels of traffic at the cost of a small
+         latency.
 
          If in doubt, say Y.