Merge series "spi: pxa2xx: Set of cleanups" from Andy Shevchenko <andriy.shevchenko...
authorMark Brown <broonie@kernel.org>
Tue, 11 May 2021 08:06:06 +0000 (09:06 +0100)
committerMark Brown <broonie@kernel.org>
Tue, 11 May 2021 08:06:06 +0000 (09:06 +0100)
Set of cleanups here and there related to the SPI PXA2xx driver.
On top of them, adding the special type for Intel Merrifield.

In v2:
- cover letter (Mark)
- drop moving the header in patch 5 (Mark)

Andy Shevchenko (14):
  spi: pxa2xx: Use one point of return when ->probe() fails
  spi: pxa2xx: Utilize MMIO and physical base from struct ssp_device
  spi: pxa2xx: Utilize struct device from struct ssp_device
  spi: pxa2xx: Replace header inclusions by forward declarations
  spi: pxa2xx: Unify ifdeffery used in the headers
  spi: pxa2xx: Group Intel Quark specific definitions
  spi: pxa2xx: Introduce int_stop_and_reset() helper
  spi: pxa2xx: Reuse int_error_stop() in pxa2xx_spi_slave_abort()
  spi: pxa2xx: Use pxa_ssp_enable()/pxa_ssp_disable() in the driver
  spi: pxa2xx: Extract pxa2xx_spi_update() helper
  spi: pxa2xx: Extract clear_SSCR1_bits() helper
  spi: pxa2xx: Extract read_SSSR_bits() helper
  spi: pxa2xx: Constify struct driver_data parameter
  spi: pxa2xx: Introduce special type for Merrifield SPIs

 drivers/spi/spi-pxa2xx-dma.c   |  37 +++----
 drivers/spi/spi-pxa2xx-pci.c   |   4 +-
 drivers/spi/spi-pxa2xx.c       | 190 +++++++++++++++++----------------
 drivers/spi/spi-pxa2xx.h       |  52 ++++-----
 include/linux/pxa2xx_ssp.h     |  42 +++++++-
 include/linux/spi/pxa2xx_spi.h |   9 +-
 sound/soc/pxa/pxa-ssp.c        |  16 ---
 7 files changed, 185 insertions(+), 165 deletions(-)

--
2.30.2

drivers/spi/spi-pxa2xx-dma.c
drivers/spi/spi-pxa2xx-pci.c
drivers/spi/spi-pxa2xx.c
drivers/spi/spi-pxa2xx.h
include/linux/pxa2xx_ssp.h
include/linux/spi/pxa2xx_spi.h

index 37567bc..e00dbad 100644 (file)
@@ -9,11 +9,11 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/pxa2xx_ssp.h>
 #include <linux/scatterlist.h>
 #include <linux/sizes.h>
-#include <linux/spi/spi.h>
+
 #include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/spi.h>
 
 #include "spi-pxa2xx.h"
 
@@ -94,14 +94,14 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
        cfg.direction = dir;
 
        if (dir == DMA_MEM_TO_DEV) {
-               cfg.dst_addr = drv_data->ssdr_physical;
+               cfg.dst_addr = drv_data->ssp->phys_base + SSDR;
                cfg.dst_addr_width = width;
                cfg.dst_maxburst = chip->dma_burst_size;
 
                sgt = &xfer->tx_sg;
                chan = drv_data->controller->dma_tx;
        } else {
-               cfg.src_addr = drv_data->ssdr_physical;
+               cfg.src_addr = drv_data->ssp->phys_base + SSDR;
                cfg.src_addr_width = width;
                cfg.src_maxburst = chip->dma_burst_size;
 
@@ -111,7 +111,7 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 
        ret = dmaengine_slave_config(chan, &cfg);
        if (ret) {
-               dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n");
+               dev_warn(drv_data->ssp->dev, "DMA slave config failed\n");
                return NULL;
        }
 
@@ -125,7 +125,7 @@ irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
 
        status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
        if (status & SSSR_ROR) {
-               dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
+               dev_err(drv_data->ssp->dev, "FIFO overrun\n");
 
                dmaengine_terminate_async(drv_data->controller->dma_rx);
                dmaengine_terminate_async(drv_data->controller->dma_tx);
@@ -145,16 +145,14 @@ int pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
 
        tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV, xfer);
        if (!tx_desc) {
-               dev_err(&drv_data->pdev->dev,
-                       "failed to get DMA TX descriptor\n");
+               dev_err(drv_data->ssp->dev, "failed to get DMA TX descriptor\n");
                err = -EBUSY;
                goto err_tx;
        }
 
        rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM, xfer);
        if (!rx_desc) {
-               dev_err(&drv_data->pdev->dev,
-                       "failed to get DMA RX descriptor\n");
+               dev_err(drv_data->ssp->dev, "failed to get DMA RX descriptor\n");
                err = -EBUSY;
                goto err_rx;
        }
@@ -191,8 +189,8 @@ void pxa2xx_spi_dma_stop(struct driver_data *drv_data)
 int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 {
        struct pxa2xx_spi_controller *pdata = drv_data->controller_info;
-       struct device *dev = &drv_data->pdev->dev;
        struct spi_controller *controller = drv_data->controller;
+       struct device *dev = drv_data->ssp->dev;
        dma_cap_mask_t mask;
 
        dma_cap_zero(mask);
index 1833f58..a259be1 100644 (file)
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+
 #include <linux/spi/pxa2xx_spi.h>
 
 #include <linux/dmaengine.h>
@@ -239,6 +240,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
        spi_pdata.dma_burst_size = c->dma_burst_size ? c->dma_burst_size : 1;
 
        ssp = &spi_pdata.ssp;
+       ssp->dev = &dev->dev;
        ssp->phys_base = pci_resource_start(dev, 0);
        ssp->mmio_base = pcim_iomap_table(dev)[0];
        ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
index 5e59ba0..1d4c7f4 100644 (file)
@@ -9,6 +9,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dmaengine.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/gpio/consumer.h>
@@ -25,6 +26,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/slab.h>
+
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/spi.h>
 
@@ -325,7 +327,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
        u32 value;
 
        config = lpss_get_config(drv_data);
-       drv_data->lpss_base = drv_data->ioaddr + config->offset;
+       drv_data->lpss_base = drv_data->ssp->mmio_base + config->offset;
 
        /* Enable software chip select control */
        value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
@@ -628,7 +630,7 @@ static void int_error_stop(struct driver_data *drv_data, const char *msg)
        pxa2xx_spi_flush(drv_data);
        pxa2xx_spi_off(drv_data);
 
-       dev_err(&drv_data->pdev->dev, "%s\n", msg);
+       dev_err(drv_data->ssp->dev, "%s\n", msg);
 
        drv_data->controller->cur_msg->status = -EIO;
        spi_finalize_current_transfer(drv_data->controller);
@@ -731,8 +733,7 @@ static void handle_bad_msg(struct driver_data *drv_data)
                pxa2xx_spi_write(drv_data, SSTO, 0);
        write_SSSR_CS(drv_data, drv_data->clear_sr);
 
-       dev_err(&drv_data->pdev->dev,
-               "bad message state in interrupt handler\n");
+       dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n");
 }
 
 static irqreturn_t ssp_int(int irq, void *dev_id)
@@ -748,7 +749,7 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
         * the IRQ was not for us (we shouldn't be RPM suspended when the
         * interrupt is enabled).
         */
-       if (pm_runtime_suspended(&drv_data->pdev->dev))
+       if (pm_runtime_suspended(drv_data->ssp->dev))
                return IRQ_NONE;
 
        /*
@@ -1158,7 +1159,7 @@ static int pxa2xx_spi_slave_abort(struct spi_controller *controller)
        pxa2xx_spi_flush(drv_data);
        pxa2xx_spi_off(drv_data);
 
-       dev_dbg(&drv_data->pdev->dev, "transfer aborted\n");
+       dev_dbg(drv_data->ssp->dev, "transfer aborted\n");
 
        drv_data->controller->cur_msg->status = -EINTR;
        spi_finalize_current_transfer(drv_data->controller);
@@ -1645,7 +1646,7 @@ static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller,
 {
        struct driver_data *drv_data = spi_controller_get_devdata(controller);
 
-       if (has_acpi_companion(&drv_data->pdev->dev)) {
+       if (has_acpi_companion(drv_data->ssp->dev)) {
                switch (drv_data->ssp_type) {
                /*
                 * For Atoms the ACPI DeviceSelection used by the Windows
@@ -1705,13 +1706,12 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 
        if (!controller) {
                dev_err(&pdev->dev, "cannot alloc spi_controller\n");
-               pxa_ssp_free(ssp);
-               return -ENOMEM;
+               status = -ENOMEM;
+               goto out_error_controller_alloc;
        }
        drv_data = spi_controller_get_devdata(controller);
        drv_data->controller = controller;
        drv_data->controller_info = platform_info;
-       drv_data->pdev = pdev;
        drv_data->ssp = ssp;
 
        controller->dev.of_node = pdev->dev.of_node;
@@ -1733,8 +1733,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 
        drv_data->ssp_type = ssp->type;
 
-       drv_data->ioaddr = ssp->mmio_base;
-       drv_data->ssdr_physical = ssp->phys_base + SSDR;
        if (pxa25x_ssp_comp(drv_data)) {
                switch (drv_data->ssp_type) {
                case QUARK_X1000_SSP:
index 1400472..739e264 100644 (file)
@@ -7,22 +7,20 @@
 #ifndef SPI_PXA2XX_H
 #define SPI_PXA2XX_H
 
-#include <linux/atomic.h>
-#include <linux/dmaengine.h>
-#include <linux/errno.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/pxa2xx_ssp.h>
-#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/types.h>
 #include <linux/sizes.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
 
-struct driver_data {
-       /* Driver model hookup */
-       struct platform_device *pdev;
+#include <linux/pxa2xx_ssp.h>
+
+struct gpio_desc;
+struct pxa2xx_spi_controller;
+struct spi_controller;
+struct spi_device;
+struct spi_transfer;
 
+struct driver_data {
        /* SSP Info */
        struct ssp_device *ssp;
 
@@ -33,10 +31,6 @@ struct driver_data {
        /* PXA hookup */
        struct pxa2xx_spi_controller *controller_info;
 
-       /* SSP register addresses */
-       void __iomem *ioaddr;
-       phys_addr_t ssdr_physical;
-
        /* SSP masks*/
        u32 dma_cr1;
        u32 int_cr1;
@@ -87,16 +81,14 @@ struct chip_data {
        void (*cs_control)(u32 command);
 };
 
-static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data,
-                                 unsigned reg)
+static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg)
 {
-       return __raw_readl(drv_data->ioaddr + reg);
+       return pxa_ssp_read_reg(drv_data->ssp, reg);
 }
 
-static  inline void pxa2xx_spi_write(const struct driver_data *drv_data,
-                                    unsigned reg, u32 val)
+static inline void pxa2xx_spi_write(const struct driver_data *drv_data, u32 reg, u32 val)
 {
-       __raw_writel(val, drv_data->ioaddr + reg);
+       pxa_ssp_write_reg(drv_data->ssp, reg, val);
 }
 
 #define DMA_ALIGNMENT          8
index 7f73b26..1b6c1a0 100644 (file)
@@ -11,8 +11,8 @@
  *       PXA3xx     SSP1, SSP2, SSP3, SSP4
  */
 
-#ifndef __LINUX_SSP_H
-#define __LINUX_SSP_H
+#ifndef __LINUX_PXA2XX_SSP_H
+#define __LINUX_PXA2XX_SSP_H
 
 #include <linux/bits.h>
 #include <linux/compiler_types.h>
@@ -38,7 +38,6 @@ struct device_node;
 #define SSDR           (0x10)  /* SSP Data Write/Data Read Register */
 
 #define SSTO           (0x28)  /* SSP Time Out Register */
-#define DDS_RATE       (0x28)  /* SSP DDS Clock Rate Register (Intel Quark) */
 #define SSPSP          (0x2C)  /* SSP Programmable Serial Protocol */
 #define SSTSA          (0x30)  /* SSP Tx Timeslot Active */
 #define SSRSA          (0x34)  /* SSP Rx Timeslot Active */
@@ -105,6 +104,9 @@ struct device_node;
 #define CE4100_SSCR1_RFT       GENMASK(11, 10) /* Receive FIFO Threshold (mask) */
 #define CE4100_SSCR1_RxTresh(x) (((x) - 1) << 10)      /* level [1..4] */
 
+/* Intel Quark X1000 */
+#define DDS_RATE               0x28             /* SSP DDS Clock Rate Register */
+
 /* QUARK_X1000 SSCR0 bit definition */
 #define QUARK_X1000_SSCR0_DSS          GENMASK(4, 0)   /* Data Size Select (mask) */
 #define QUARK_X1000_SSCR0_DataSize(x)  ((x) - 1)       /* Data Size Select [4..32] */
@@ -270,4 +272,4 @@ static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n,
 static inline void pxa_ssp_free(struct ssp_device *ssp) {}
 #endif
 
-#endif
+#endif /* __LINUX_PXA2XX_SSP_H */
index 31f00c7..12ef04d 100644 (file)
@@ -2,8 +2,10 @@
 /*
  * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
  */
-#ifndef __linux_pxa2xx_spi_h
-#define __linux_pxa2xx_spi_h
+#ifndef __LINUX_SPI_PXA2XX_SPI_H
+#define __LINUX_SPI_PXA2XX_SPI_H
+
+#include <linux/types.h>
 
 #include <linux/pxa2xx_ssp.h>
 
@@ -49,4 +51,5 @@ struct pxa2xx_spi_chip {
 extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info);
 
 #endif
-#endif
+
+#endif /* __LINUX_SPI_PXA2XX_SPI_H */