int n_patterns;
};
+/**
+ * struct cfg80211_coalesce_rules - Coalesce rule parameters
+ *
+ * This structure defines coalesce rule for the device.
+ * @delay: maximum coalescing delay in msecs.
+ * @condition: condition for packet coalescence.
+ * see &enum nl80211_coalesce_condition.
+ * @patterns: array of packet patterns
+ * @n_patterns: number of patterns
+ */
+struct cfg80211_coalesce_rules {
+ int delay;
+ enum nl80211_coalesce_condition condition;
+ struct cfg80211_pkt_pattern *patterns;
+ int n_patterns;
+};
+
+/**
+ * struct cfg80211_coalesce - Packet coalescing settings
+ *
+ * This structure defines coalescing settings.
+ * @rules: array of coalesce rules
+ * @n_rules: number of rules
+ */
+struct cfg80211_coalesce {
+ struct cfg80211_coalesce_rules *rules;
+ int n_rules;
+};
+
/**
* struct cfg80211_wowlan_wakeup - wakeup report
* @disconnect: woke up by getting disconnected
* driver can take the most appropriate actions.
* @crit_proto_stop: Indicates critical protocol no longer needs increased link
* reliability. This operation can not fail.
+ * @set_coalesce: Set coalesce parameters.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
u16 duration);
void (*crit_proto_stop)(struct wiphy *wiphy,
struct wireless_dev *wdev);
+ int (*set_coalesce)(struct wiphy *wiphy,
+ struct cfg80211_coalesce *coalesce);
};
/*
const struct wiphy_wowlan_tcp_support *tcp;
};
+/**
+ * struct wiphy_coalesce_support - coalesce support data
+ * @n_rules: maximum number of coalesce rules
+ * @max_delay: maximum supported coalescing delay in msecs
+ * @n_patterns: number of supported patterns in a rule
+ * (see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
+ */
+struct wiphy_coalesce_support {
+ int n_rules;
+ int max_delay;
+ int n_patterns;
+ int pattern_max_len;
+ int pattern_min_len;
+ int max_pkt_offset;
+};
+
/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback,
* 802.11-2012 8.4.2.29 for the defined fields.
* @extended_capabilities_mask: mask of the valid values
* @extended_capabilities_len: length of the extended capabilities
+ * @coalesce: packet coalescing support information
*/
struct wiphy {
/* assign these fields before you register the wiphy */
const struct iw_handler_def *wext;
#endif
+ const struct wiphy_coalesce_support *coalesce;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
* interfaces that a given device supports.
*/
+/**
+ * DOC: packet coalesce support
+ *
+ * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
+ * packets does not do anything with these packets. Therefore the
+ * reception of these unwanted packets causes unnecessary processing
+ * and power consumption.
+ *
+ * Packet coalesce feature helps to reduce number of received interrupts
+ * to host by buffering these packets in firmware/hardware for some
+ * predefined time. Received interrupt will be generated when one of the
+ * following events occur.
+ * a) Expiration of hardware timer whose expiration time is set to maximum
+ * coalescing delay of matching coalesce rule.
+ * b) Coalescing buffer in hardware reaches it's limit.
+ * c) Packet doesn't match any of the configured coalesce rules.
+ *
+ * User needs to configure following parameters for creating a coalesce
+ * rule.
+ * a) Maximum coalescing delay
+ * b) List of packet patterns which needs to be matched
+ * c) Condition for coalescence. pattern 'match' or 'no match'
+ * Multiple such rules can be created.
+ */
+
/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
* return back to normal.
*
+ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
+ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_CRIT_PROTOCOL_START,
NL80211_CMD_CRIT_PROTOCOL_STOP,
+ NL80211_CMD_GET_COALESCE,
+ NL80211_CMD_SET_COALESCE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* allowed to be used with the first @NL80211_CMD_SET_STATION command to
* update a TDLS peer STA entry.
*
+ * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_PEER_AID,
+ NL80211_ATTR_COALESCE_RULE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
* @max_pkt_offset: maximum Rx packet offset
*
* This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
+ * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
+ * %NL80211_ATTR_COALESCE_RULE in the capability information given
+ * by the kernel to userspace.
*/
struct nl80211_pattern_support {
__u32 max_patterns;
MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
};
+/**
+ * struct nl80211_coalesce_rule_support - coalesce rule support information
+ * @max_rules: maximum number of rules supported
+ * @pat: packet pattern support information
+ * @max_delay: maximum supported coalescing delay in msecs
+ *
+ * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_coalesce_rule_support {
+ __u32 max_rules;
+ struct nl80211_pattern_support pat;
+ __u32 max_delay;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_attr_coalesce_rule - coalesce rule attribute
+ * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
+ * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
+ * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
+ * see &enum nl80211_coalesce_condition.
+ * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
+ * after these fixed number of bytes of received packet
+ * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
+ * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
+ */
+enum nl80211_attr_coalesce_rule {
+ __NL80211_COALESCE_RULE_INVALID,
+ NL80211_ATTR_COALESCE_RULE_DELAY,
+ NL80211_ATTR_COALESCE_RULE_CONDITION,
+ NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
+
+ /* keep last */
+ NUM_NL80211_ATTR_COALESCE_RULE,
+ NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
+};
+
+/**
+ * enum nl80211_coalesce_condition - coalesce rule conditions
+ * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * in a rule are matched.
+ * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
+ * in a rule are not matched.
+ */
+enum nl80211_coalesce_condition {
+ NL80211_COALESCE_CONDITION_MATCH,
+ NL80211_COALESCE_CONDITION_NO_MATCH
+};
+
/**
* enum nl80211_iface_limit_attrs - limit attributes
* @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
[NL80211_WOWLAN_TCP_WAKE_MASK] = { .len = 1 },
};
+/* policy for coalesce rule attributes */
+static const struct nla_policy
+nl80211_coalesce_policy[NUM_NL80211_ATTR_COALESCE_RULE] = {
+ [NL80211_ATTR_COALESCE_RULE_DELAY] = { .type = NLA_U32 },
+ [NL80211_ATTR_COALESCE_RULE_CONDITION] = { .type = NLA_U32 },
+ [NL80211_ATTR_COALESCE_RULE_PKT_PATTERN] = { .type = NLA_NESTED },
+};
+
/* policy for GTK rekey offload attributes */
static const struct nla_policy
nl80211_rekey_policy[NUM_NL80211_REKEY_DATA] = {
}
#endif
+static int nl80211_send_coalesce(struct sk_buff *msg,
+ struct cfg80211_registered_device *dev)
+{
+ struct nl80211_coalesce_rule_support rule;
+
+ if (!dev->wiphy.coalesce)
+ return 0;
+
+ rule.max_rules = dev->wiphy.coalesce->n_rules;
+ rule.max_delay = dev->wiphy.coalesce->max_delay;
+ rule.pat.max_patterns = dev->wiphy.coalesce->n_patterns;
+ rule.pat.min_pattern_len = dev->wiphy.coalesce->pattern_min_len;
+ rule.pat.max_pattern_len = dev->wiphy.coalesce->pattern_max_len;
+ rule.pat.max_pkt_offset = dev->wiphy.coalesce->max_pkt_offset;
+
+ if (nla_put(msg, NL80211_ATTR_COALESCE_RULE, sizeof(rule), &rule))
+ return -ENOBUFS;
+
+ return 0;
+}
+
static int nl80211_send_band_rateinfo(struct sk_buff *msg,
struct ieee80211_supported_band *sband)
{
dev->wiphy.vht_capa_mod_mask))
goto nla_put_failure;
+ state->split_start++;
+ break;
+ case 10:
+ if (nl80211_send_coalesce(msg, dev))
+ goto nla_put_failure;
+
/* done */
state->split_start = 0;
break;
}
#endif
+static int nl80211_send_coalesce_rules(struct sk_buff *msg,
+ struct cfg80211_registered_device *rdev)
+{
+ struct nlattr *nl_pats, *nl_pat, *nl_rule, *nl_rules;
+ int i, j, pat_len;
+ struct cfg80211_coalesce_rules *rule;
+
+ if (!rdev->coalesce->n_rules)
+ return 0;
+
+ nl_rules = nla_nest_start(msg, NL80211_ATTR_COALESCE_RULE);
+ if (!nl_rules)
+ return -ENOBUFS;
+
+ for (i = 0; i < rdev->coalesce->n_rules; i++) {
+ nl_rule = nla_nest_start(msg, i + 1);
+ if (!nl_rule)
+ return -ENOBUFS;
+
+ rule = &rdev->coalesce->rules[i];
+ if (nla_put_u32(msg, NL80211_ATTR_COALESCE_RULE_DELAY,
+ rule->delay))
+ return -ENOBUFS;
+
+ if (nla_put_u32(msg, NL80211_ATTR_COALESCE_RULE_CONDITION,
+ rule->condition))
+ return -ENOBUFS;
+
+ nl_pats = nla_nest_start(msg,
+ NL80211_ATTR_COALESCE_RULE_PKT_PATTERN);
+ if (!nl_pats)
+ return -ENOBUFS;
+
+ for (j = 0; j < rule->n_patterns; j++) {
+ nl_pat = nla_nest_start(msg, j + 1);
+ if (!nl_pat)
+ return -ENOBUFS;
+ pat_len = rule->patterns[j].pattern_len;
+ if (nla_put(msg, NL80211_PKTPAT_MASK,
+ DIV_ROUND_UP(pat_len, 8),
+ rule->patterns[j].mask) ||
+ nla_put(msg, NL80211_PKTPAT_PATTERN, pat_len,
+ rule->patterns[j].pattern) ||
+ nla_put_u32(msg, NL80211_PKTPAT_OFFSET,
+ rule->patterns[j].pkt_offset))
+ return -ENOBUFS;
+ nla_nest_end(msg, nl_pat);
+ }
+ nla_nest_end(msg, nl_pats);
+ nla_nest_end(msg, nl_rule);
+ }
+ nla_nest_end(msg, nl_rules);
+
+ return 0;
+}
+
+static int nl80211_get_coalesce(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct sk_buff *msg;
+ void *hdr;
+
+ if (!rdev->wiphy.coalesce)
+ return -EOPNOTSUPP;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
+ NL80211_CMD_GET_COALESCE);
+ if (!hdr)
+ goto nla_put_failure;
+
+ if (rdev->coalesce && nl80211_send_coalesce_rules(msg, rdev))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+ return genlmsg_reply(msg, info);
+
+nla_put_failure:
+ nlmsg_free(msg);
+ return -ENOBUFS;
+}
+
+void cfg80211_rdev_free_coalesce(struct cfg80211_registered_device *rdev)
+{
+ struct cfg80211_coalesce *coalesce = rdev->coalesce;
+ int i, j;
+ struct cfg80211_coalesce_rules *rule;
+
+ if (!coalesce)
+ return;
+
+ for (i = 0; i < coalesce->n_rules; i++) {
+ rule = &coalesce->rules[i];
+ for (j = 0; j < rule->n_patterns; j++)
+ kfree(rule->patterns[j].mask);
+ kfree(rule->patterns);
+ }
+ kfree(coalesce->rules);
+ kfree(coalesce);
+ rdev->coalesce = NULL;
+}
+
+static int nl80211_parse_coalesce_rule(struct cfg80211_registered_device *rdev,
+ struct nlattr *rule,
+ struct cfg80211_coalesce_rules *new_rule)
+{
+ int err, i;
+ const struct wiphy_coalesce_support *coalesce = rdev->wiphy.coalesce;
+ struct nlattr *tb[NUM_NL80211_ATTR_COALESCE_RULE], *pat;
+ int rem, pat_len, mask_len, pkt_offset, n_patterns = 0;
+ struct nlattr *pat_tb[NUM_NL80211_PKTPAT];
+
+ err = nla_parse(tb, NL80211_ATTR_COALESCE_RULE_MAX, nla_data(rule),
+ nla_len(rule), nl80211_coalesce_policy);
+ if (err)
+ return err;
+
+ if (tb[NL80211_ATTR_COALESCE_RULE_DELAY])
+ new_rule->delay =
+ nla_get_u32(tb[NL80211_ATTR_COALESCE_RULE_DELAY]);
+ if (new_rule->delay > coalesce->max_delay)
+ return -EINVAL;
+
+ if (tb[NL80211_ATTR_COALESCE_RULE_CONDITION])
+ new_rule->condition =
+ nla_get_u32(tb[NL80211_ATTR_COALESCE_RULE_CONDITION]);
+ if (new_rule->condition != NL80211_COALESCE_CONDITION_MATCH &&
+ new_rule->condition != NL80211_COALESCE_CONDITION_NO_MATCH)
+ return -EINVAL;
+
+ if (!tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN])
+ return -EINVAL;
+
+ nla_for_each_nested(pat, tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN],
+ rem)
+ n_patterns++;
+ if (n_patterns > coalesce->n_patterns)
+ return -EINVAL;
+
+ new_rule->patterns = kcalloc(n_patterns, sizeof(new_rule->patterns[0]),
+ GFP_KERNEL);
+ if (!new_rule->patterns)
+ return -ENOMEM;
+
+ new_rule->n_patterns = n_patterns;
+ i = 0;
+
+ nla_for_each_nested(pat, tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN],
+ rem) {
+ nla_parse(pat_tb, MAX_NL80211_PKTPAT, nla_data(pat),
+ nla_len(pat), NULL);
+ if (!pat_tb[NL80211_PKTPAT_MASK] ||
+ !pat_tb[NL80211_PKTPAT_PATTERN])
+ return -EINVAL;
+ pat_len = nla_len(pat_tb[NL80211_PKTPAT_PATTERN]);
+ mask_len = DIV_ROUND_UP(pat_len, 8);
+ if (nla_len(pat_tb[NL80211_PKTPAT_MASK]) != mask_len)
+ return -EINVAL;
+ if (pat_len > coalesce->pattern_max_len ||
+ pat_len < coalesce->pattern_min_len)
+ return -EINVAL;
+
+ if (!pat_tb[NL80211_PKTPAT_OFFSET])
+ pkt_offset = 0;
+ else
+ pkt_offset = nla_get_u32(pat_tb[NL80211_PKTPAT_OFFSET]);
+ if (pkt_offset > coalesce->max_pkt_offset)
+ return -EINVAL;
+ new_rule->patterns[i].pkt_offset = pkt_offset;
+
+ new_rule->patterns[i].mask =
+ kmalloc(mask_len + pat_len, GFP_KERNEL);
+ if (!new_rule->patterns[i].mask)
+ return -ENOMEM;
+ new_rule->patterns[i].pattern =
+ new_rule->patterns[i].mask + mask_len;
+ memcpy(new_rule->patterns[i].mask,
+ nla_data(pat_tb[NL80211_PKTPAT_MASK]), mask_len);
+ new_rule->patterns[i].pattern_len = pat_len;
+ memcpy(new_rule->patterns[i].pattern,
+ nla_data(pat_tb[NL80211_PKTPAT_PATTERN]), pat_len);
+ i++;
+ }
+
+ return 0;
+}
+
+static int nl80211_set_coalesce(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ const struct wiphy_coalesce_support *coalesce = rdev->wiphy.coalesce;
+ struct cfg80211_coalesce new_coalesce = {};
+ struct cfg80211_coalesce *n_coalesce;
+ int err, rem_rule, n_rules = 0, i, j;
+ struct nlattr *rule;
+ struct cfg80211_coalesce_rules *tmp_rule;
+
+ if (!rdev->wiphy.coalesce || !rdev->ops->set_coalesce)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_COALESCE_RULE]) {
+ cfg80211_rdev_free_coalesce(rdev);
+ rdev->ops->set_coalesce(&rdev->wiphy, NULL);
+ return 0;
+ }
+
+ nla_for_each_nested(rule, info->attrs[NL80211_ATTR_COALESCE_RULE],
+ rem_rule)
+ n_rules++;
+ if (n_rules > coalesce->n_rules)
+ return -EINVAL;
+
+ new_coalesce.rules = kcalloc(n_rules, sizeof(new_coalesce.rules[0]),
+ GFP_KERNEL);
+ if (!new_coalesce.rules)
+ return -ENOMEM;
+
+ new_coalesce.n_rules = n_rules;
+ i = 0;
+
+ nla_for_each_nested(rule, info->attrs[NL80211_ATTR_COALESCE_RULE],
+ rem_rule) {
+ err = nl80211_parse_coalesce_rule(rdev, rule,
+ &new_coalesce.rules[i]);
+ if (err)
+ goto error;
+
+ i++;
+ }
+
+ err = rdev->ops->set_coalesce(&rdev->wiphy, &new_coalesce);
+ if (err)
+ goto error;
+
+ n_coalesce = kmemdup(&new_coalesce, sizeof(new_coalesce), GFP_KERNEL);
+ if (!n_coalesce) {
+ err = -ENOMEM;
+ goto error;
+ }
+ cfg80211_rdev_free_coalesce(rdev);
+ rdev->coalesce = n_coalesce;
+
+ return 0;
+error:
+ for (i = 0; i < new_coalesce.n_rules; i++) {
+ tmp_rule = &new_coalesce.rules[i];
+ for (j = 0; j < tmp_rule->n_patterns; j++)
+ kfree(tmp_rule->patterns[j].mask);
+ kfree(tmp_rule->patterns);
+ }
+ kfree(new_coalesce.rules);
+
+ return err;
+}
+
static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_GET_COALESCE,
+ .doit = nl80211_get_coalesce,
+ .policy = nl80211_policy,
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_SET_COALESCE,
+ .doit = nl80211_set_coalesce,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
}
};
projects / linux-2.6-microblaze.git / commitdiff