arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx...
authorFrank Li <Frank.Li@nxp.com>
Tue, 22 Oct 2024 22:04:29 +0000 (18:04 -0400)
committerShawn Guo <shawnguo@kernel.org>
Mon, 4 Nov 2024 08:46:32 +0000 (16:46 +0800)
Move 'samsung,burst-clock-frequency' and 'samsung,esc-clock-frequency'
properties to i.MX8MN and i.MX8MM mba8mx board file. These properties are
not applicable to i.MX8MQ MIPI DSI, which uses the compatible string
'fsl,imx8mq-nwl-dsi'. The properties are only valid for i.MX8MM and i.MX8MN
devices with the compatible string 'fsl,imx8mm-mipi-dsim', as described in
samsung,mipi-dsim.yaml.

Fix warning:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb: dsi@30a00000:
    Unevaluated properties are not allowed ('ports', 'samsung,burst-clock-frequency', 'samsung,esc-clock-frequency' were unexpected)
        from schema $id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
arch/arm64/boot/dts/freescale/mba8mx.dtsi

index 01b632b..b941c8c 100644 (file)
        };
 };
 
+&mipi_dsi {
+       samsung,burst-clock-frequency = <891000000>;
+       samsung,esc-clock-frequency = <20000000>;
+};
+
 &pcie_phy {
        fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
        fsl,clkreq-unsupported;
index 433d8bb..dc94d73 100644 (file)
        };
 };
 
+&mipi_dsi {
+       samsung,burst-clock-frequency = <891000000>;
+       samsung,esc-clock-frequency = <20000000>;
+};
+
 &sai3 {
        assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
        assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
index 3d26b69..58e3865 100644 (file)
        };
 };
 
-&mipi_dsi {
-       samsung,burst-clock-frequency = <891000000>;
-       samsung,esc-clock-frequency = <20000000>;
-};
-
 &mipi_dsi_out {
        data-lanes = <1 2 3 4>;
        remote-endpoint = <&lvds_bridge_in>;