gpio: mpfs: fix setting gpio direction to output

mpfs_gpio_direction_output() actually sets the line to input mode.
Use the correct register settings for output mode so that this function
actually works as intended.

This was a copy-paste mistake made when converting to regmap during the
driver submission process. It went unnoticed because my test for output
mode is toggling LEDs on an Icicle kit which functions with the
incorrect code. The internal reporter has yet to test the patch, but on
their system the incorrect setting may be the reason for failures to
drive the GPIO lines on the BeagleV-fire board.

CC: stable@vger.kernel.org
Fixes: a987b78f3615e ("gpio: mpfs: add polarfire soc gpio support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250925-boogieman-carrot-82989ff75d10@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/drivers/gpio/gpio-mpfs.c b/drivers/gpio/gpio-mpfs.c
index 82d557a..9468795 100644 (file)
--- a/drivers/gpio/gpio-mpfs.c
+++ b/drivers/gpio/gpio-mpfs.c
@@ -69,7 +69,7 @@ static int mpfs_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio_in
        struct mpfs_gpio_chip *mpfs_gpio = gpiochip_get_data(gc);
 
        regmap_update_bits(mpfs_gpio->regs, MPFS_GPIO_CTRL(gpio_index),
-                          MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_IN);
+                          MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_OUT | MPFS_GPIO_EN_OUT_BUF);
        regmap_update_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index),
                           value << gpio_index);