spi: omap2-mcspi: Set FIFO DMA trigger level to word length

McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 985f00d..88469bb 100644 (file)
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -300,7 +300,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
        struct omap2_mcspi_cs *cs = spi->controller_state;
        struct omap2_mcspi *mcspi;
        unsigned int wcnt;
-       int max_fifo_depth, fifo_depth, bytes_per_word;
+       int max_fifo_depth, bytes_per_word;
        u32 chconf, xferlevel;
 
        mcspi = spi_master_get_devdata(master);
@@ -316,10 +316,6 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
                else
                        max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
 
-               fifo_depth = gcd(t->len, max_fifo_depth);
-               if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
-                       goto disable_fifo;
-
                wcnt = t->len / bytes_per_word;
                if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
                        goto disable_fifo;
@@ -327,16 +323,17 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
                xferlevel = wcnt << 16;
                if (t->rx_buf != NULL) {
                        chconf |= OMAP2_MCSPI_CHCONF_FFER;
-                       xferlevel |= (fifo_depth - 1) << 8;
+                       xferlevel |= (bytes_per_word - 1) << 8;
                }
+
                if (t->tx_buf != NULL) {
                        chconf |= OMAP2_MCSPI_CHCONF_FFET;
-                       xferlevel |= fifo_depth - 1;
+                       xferlevel |= bytes_per_word - 1;
                }
 
                mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
                mcspi_write_chconf0(spi, chconf);
-               mcspi->fifo_depth = fifo_depth;
+               mcspi->fifo_depth = max_fifo_depth;
 
                return;
        }
@@ -576,7 +573,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
        struct dma_slave_config cfg;
        enum dma_slave_buswidth width;
        unsigned es;
-       u32                     burst;
        void __iomem            *chstat_reg;
        void __iomem            *irqstat_reg;
        int                     wait_res;
@@ -596,22 +592,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
        }
 
        count = xfer->len;
-       burst = 1;
-
-       if (mcspi->fifo_depth > 0) {
-               if (count > mcspi->fifo_depth)
-                       burst = mcspi->fifo_depth / es;
-               else
-                       burst = count / es;
-       }
 
        memset(&cfg, 0, sizeof(cfg));
        cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
        cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
        cfg.src_addr_width = width;
        cfg.dst_addr_width = width;
-       cfg.src_maxburst = burst;
-       cfg.dst_maxburst = burst;
+       cfg.src_maxburst = es;
+       cfg.dst_maxburst = es;
 
        rx = xfer->rx_buf;
        tx = xfer->tx_buf;