Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
};
/* Messaging Units */
-&mu_m0{
+&mu_m0 {
status = "okay";
};
-&mu1_m0{
+&mu1_m0 {
status = "okay";
};
-&mu2_m0{
+&mu2_m0 {
status = "okay";
};
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
- buck1: BUCK1{
+ buck1: BUCK1 {
regulator-name = "VDD_SOC";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <3125>;
};
- buck4: BUCK4{
+ buck4: BUCK4 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- buck5: BUCK5{
+ buck5: BUCK5 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
nxp,dvs-standby-voltage = <850000>;
};
- buck4: BUCK4{
+ buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
- buck5: BUCK5{
+ buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
};
};
-&pgc_gpu{
+&pgc_gpu {
power-supply = <&sw1a_reg>;
};
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
- snvs_rtc: snvs-rtc-lp{
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
>;
};
- pinctrl_leds: ledsgrp{
+ pinctrl_leds: ledsgrp {
fsl,pins = <
IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021
IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021