# and check that configured MTU is used on link creation and changes, and
# that MTU is properly calculated instead when MTU is not configured from
# userspace
+#
+# - cleanup_ipv4_exception
+# Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU
+# exceptions on multiple CPUs and check that the veth device tear-down
+# happens in a timely manner
+#
+# - cleanup_ipv6_exception
+# Same as above, but use IPv6 transport from A to B
+
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
pmtu_vti6_default_mtu vti6: default MTU assignment
pmtu_vti4_link_add_mtu vti4: MTU setting on link creation
pmtu_vti6_link_add_mtu vti6: MTU setting on link creation
- pmtu_vti6_link_change_mtu vti6: MTU changes on link changes"
+ pmtu_vti6_link_change_mtu vti6: MTU changes on link changes
+ cleanup_ipv4_exception ipv4: cleanup of cached exceptions
+ cleanup_ipv6_exception ipv6: cleanup of cached exceptions"
NS_A="ns-$(mktemp -u XXXXXX)"
NS_B="ns-$(mktemp -u XXXXXX)"
return ${fail}
}
+check_command() {
+ cmd=${1}
+
+ if ! which ${cmd} > /dev/null 2>&1; then
+ err " missing required command: '${cmd}'"
+ return 1
+ fi
+ return 0
+}
+
+test_cleanup_vxlanX_exception() {
+ outer="${1}"
+ encap="vxlan"
+ ll_mtu=4000
+
+ check_command taskset || return 2
+ cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2)
+
+ setup namespaces routing ${encap}${outer} || return 2
+ trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
+ "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
+ "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
+
+ # Create route exception by exceeding link layer MTU
+ mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000))
+ mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+ mtu "${ns_b}" veth_B-R1 ${ll_mtu}
+ mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+ mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
+ mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
+
+ # Fill exception cache for multiple CPUs (2)
+ # we can always use inner IPv4 for that
+ for cpu in ${cpu_list}; do
+ taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null
+ done
+
+ ${ns_a} ip link del dev veth_A-R1 &
+ iplink_pid=$!
+ sleep 1
+ if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then
+ err " can't delete veth device in a timely manner, PMTU dst likely leaked"
+ return 1
+ fi
+}
+
+test_cleanup_ipv6_exception() {
+ test_cleanup_vxlanX_exception 6
+}
+
+test_cleanup_ipv4_exception() {
+ test_cleanup_vxlanX_exception 4
+}
+
usage() {
echo
echo "$0 [OPTIONS] [TEST]..."