- const: empire-electronix,m712
- const: allwinner,sun5i-a13
+ - description: Forlinx OKA40i-C Development board
+ items:
+ - const: forlinx,oka40i-c
+ - const: forlinx,feta40i-c
+ - const: allwinner,sun8i-r40
+
- description: FriendlyARM NanoPi A64
items:
- const: friendlyarm,nanopi-a64
- const: friendlyarm,nanopi-r1
- const: allwinner,sun8i-h3
+ - description: FriendlyARM NanoPi R1S H5
+ items:
+ - const: friendlyarm,nanopi-r1s-h5
+ - const: allwinner,sun50i-h5
+
- description: FriendlyARM ZeroPi
items:
- const: friendlyarm,zeropi
- items:
- const: allwinner,sun8i-a83t-pwm
- const: allwinner,sun8i-h3-pwm
+ - items:
+ - const: allwinner,sun8i-v3s-pwm
+ - const: allwinner,sun7i-a20-pwm
- items:
- const: allwinner,sun50i-a64-pwm
- const: allwinner,sun5i-a13-pwm
- const: allwinner,sun6i-a31-i2s
- const: allwinner,sun8i-a83t-i2s
- const: allwinner,sun8i-h3-i2s
+ - items:
+ - const: allwinner,sun8i-v3-i2s
+ - const: allwinner,sun8i-h3-i2s
- const: allwinner,sun50i-a64-codec-i2s
- items:
- const: allwinner,sun50i-a64-i2s
properties:
compatible:
- enum:
+ oneOf:
# FIXME: This is documented in the PRCM binding, but needs to be
# migrated here at some point
# - allwinner,sun8i-a23-codec-analog
- - allwinner,sun8i-h3-codec-analog
- - allwinner,sun8i-v3s-codec-analog
+ - const: allwinner,sun8i-h3-codec-analog
+ - items:
+ - const: allwinner,sun8i-v3-codec-analog
+ - const: allwinner,sun8i-h3-codec-analog
+ - const: allwinner,sun8i-v3s-codec-analog
reg:
maxItems: 1
properties:
"#sound-dai-cells":
- const: 0
+ minimum: 0
+ maximum: 1
+ description:
+ A value of 0 is deprecated. When used, it only allows access to
+ the ADC/DAC and AIF1 (the CPU DAI), not the other two AIFs/DAIs.
compatible:
oneOf:
examples:
- |
audio-codec@1c22e00 {
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
interrupts = <0 29 4>;
properties:
compatible:
- enum:
- - allwinner,sun4i-a10-timer
- - allwinner,sun8i-a23-timer
- - allwinner,sun8i-v3s-timer
- - allwinner,suniv-f1c100s-timer
+ oneOf:
+ - enum:
+ - allwinner,sun4i-a10-timer
+ - allwinner,sun8i-a23-timer
+ - allwinner,sun8i-v3s-timer
+ - allwinner,suniv-f1c100s-timer
+ - items:
+ - enum:
+ - allwinner,sun50i-a64-timer
+ - allwinner,sun50i-h6-timer
+ - allwinner,sun50i-h616-timer
+ - const: allwinner,sun8i-a23-timer
reg:
maxItems: 1
- if:
properties:
compatible:
- items:
- const: allwinner,sun4i-a10-timer
+ enum:
+ - allwinner,sun4i-a10-timer
then:
properties:
- if:
properties:
compatible:
- items:
- const: allwinner,sun8i-a23-timer
+ enum:
+ - allwinner,sun8i-a23-timer
then:
properties:
- if:
properties:
compatible:
- items:
- const: allwinner,sun8i-v3s-timer
-
- then:
- properties:
- interrupts:
- minItems: 3
- maxItems: 3
-
- - if:
- properties:
- compatible:
- items:
- const: allwinner,suniv-f1c100s-timer
+ enum:
+ - allwinner,sun8i-v3s-timer
+ - allwinner,suniv-f1c100s-timer
then:
properties:
description: Firefly
"^focaltech,.*":
description: FocalTech Systems Co.,Ltd
+ "^forlinx,.*":
+ description: Baoding Forlinx Embedded Technology Co., Ltd.
"^frida,.*":
description: Shenzhen Frida LCD Co., Ltd.
"^friendlyarm,.*":
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-r40-oka40i-c.dtb \
sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
};
link_codec: simple-audio-card,codec {
- sound-dai = <&codec>;
+ sound-dai = <&codec 0>;
};
};
};
codec: codec@1c22e00 {
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_aldo2>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_out_a_pin>;
+ vcc-pa-supply = <®_dcdc1>;
+ vcc-pc-supply = <®_aldo2>;
+ vcc-pd-supply = <®_dcdc1>;
+ vcc-pf-supply = <®_dldo4>;
+ vcc-pg-supply = <®_dldo1>;
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pa";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+®_eldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Forlinx OKA40i-C";
+ compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+ aliases {
+ ethernet0 = &gmac;
+ serial0 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5; /* RS485 */
+ serial7 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-5 { /* this is how the leds are labeled on the board */
+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-6 {
+ gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "ext_clock";
+ };
+};
+
+&ahci {
+ ahci-supply = <®_dldo4>;
+ phy-supply = <®_eldo2>;
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <®_dcdc1>;
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+ status = "okay";
+};
+
+&mmc3 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+®_dc1sw {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-lcd";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pg_pins>;
+ status = "okay";
+};
+
+&uart5 { /* RS485 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_ph_pins>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pi_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC3>;
reset-names = "ahb";
+ pinctrl-0 = <&mmc3_pins>;
+ pinctrl-names = "default";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
bias-pull-up;
};
+ /omit-if-no-ref/
+ mmc3_pins: mmc3-pins {
+ pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
+ function = "mmc3";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
/omit-if-no-ref/
spi0_pc_pins: spi0-pc-pins {
pins = "PC0", "PC1", "PC2";
function = "spi1";
};
+ /omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
+ /omit-if-no-ref/
+ uart2_pi_pins: uart2-pi-pins {
+ pins = "PI18", "PI19";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
+ uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+ pins = "PI16", "PI17";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
+
+ /omit-if-no-ref/
+ uart4_pg_pins: uart4-pg-pins {
+ pins = "PG10", "PG11";
+ function = "uart4";
+ };
+
+ /omit-if-no-ref/
+ uart5_ph_pins: uart5-ph-pins {
+ pins = "PH6", "PH7";
+ function = "uart5";
+ };
+
+ /omit-if-no-ref/
+ uart7_pi_pins: uart7-pi-pins {
+ pins = "PI20", "PI21";
+ function = "uart7";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
wdt: watchdog@1c20c90 {
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
*/
#include "sun8i-v3s.dtsi"
+/ {
+ soc {
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3-i2s",
+ "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins>;
+ resets = <&ccu RST_BUS_I2S0>;
+ status = "disabled";
+ };
+ };
+};
+
&ccu {
compatible = "allwinner,sun8i-v3-ccu";
};
+&codec_analog {
+ compatible = "allwinner,sun8i-v3-codec-analog",
+ "allwinner,sun8i-h3-codec-analog";
+};
+
&emac {
/delete-property/ phy-handle;
/delete-property/ phy-mode;
&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
+ i2s0_pins: i2s0-pins {
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "i2s";
+ };
+
uart1_pg_pins: uart1-pg-pins {
pins = "PG6", "PG7";
function = "uart1";
compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
"allwinner,sun8i-v3s";
+ aliases {
+ ethernet0 = &emac;
+ };
+
leds {
/* The LEDs use PG0~2 pins, which conflict with MMC1 */
status = "disabled";
};
};
-&mmc1 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
+&emac {
+ allwinner,leds-active-low;
status = "okay";
};
voltage = <800000>;
};
};
+
+&mmc1 {
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun8i-v3s-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
clock-names = "ahb", "mod";
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_CE>;
reset-names = "ahb";
};
clocks = <&osc24M>;
};
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun8i-v3s-pwm",
+ "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x400>;
status = "disabled";
};
+ codec: codec@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3s-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ allwinner,codec-analog-controls = <&codec_analog>;
+ status = "disabled";
+ };
+
+ codec_analog: codec-analog@1c23000 {
+ compatible = "allwinner,sun8i-v3s-codec-analog";
+ reg = <0x01c23000 0x4>;
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART2>;
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
/* Backlight configuration differs per PinePhone revision. */
};
+ bt_sco_codec: bt-sco-codec {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
};
&codec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&aif3_pins>;
status = "okay";
};
&sound {
status = "okay";
+ simple-audio-card,name = "PinePhone";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
+
+ simple-audio-card,dai-link@2 {
+ format = "dsp_a";
+ frame-master = <&link2_codec>;
+ bitclock-master = <&link2_codec>;
+ bitclock-inversion;
+
+ link2_cpu: cpu {
+ sound-dai = <&bt_sco_codec 0>;
+ };
+
+ link2_codec: codec {
+ sound-dai = <&codec 2>;
+ dai-tdm-slot-num = <1>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
};
&uart0 {
};
sound: sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-a64-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&cpudai>;
- simple-audio-card,bitclock-master = <&cpudai>;
- simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "DACL",
"ADCR", "Right ADC";
status = "disabled";
- cpudai: simple-audio-card,cpu {
- sound-dai = <&dai>;
- };
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ frame-master = <&link0_cpu>;
+ bitclock-master = <&link0_cpu>;
+ mclk-fs = <128>;
+
+ link0_cpu: cpu {
+ sound-dai = <&dai>;
+ };
- link_codec: simple-audio-card,codec {
- sound-dai = <&codec>;
+ link0_codec: codec {
+ sound-dai = <&codec 0>;
+ };
};
};
interrupt-controller;
#interrupt-cells = <3>;
+ /omit-if-no-ref/
+ aif2_pins: aif2-pins {
+ pins = "PB4", "PB5", "PB6", "PB7";
+ function = "aif2";
+ };
+
+ /omit-if-no-ref/
+ aif3_pins: aif3-pins {
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "aif3";
+ };
+
csi_pins: csi-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
"PE7", "PE8", "PE9", "PE10", "PE11";
};
};
+ timer@1c20c00 {
+ compatible = "allwinner,sun50i-a64-timer",
+ "allwinner,sun8i-a23-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ wdt0: watchdog@1c20ca0 {
+ compatible = "allwinner,sun50i-a64-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-spdif",
};
codec: codec@1c22e00 {
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
compatible = "allwinner,sun50i-a64-codec",
"allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
#address-cells = <1>;
#size-cells = <0>;
};
-
- wdt0: watchdog@1c20ca0 {
- compatible = "allwinner,sun50i-a64-wdt",
- "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ * Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "FriendlyARM NanoPi R1S H5";
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0x1>;
+ states = <1100000 0x0>, <1300000 0x1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: sdio_wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
};
};
+ timer@3009000 {
+ compatible = "allwinner,sun50i-h6-timer",
+ "allwinner,sun8i-a23-timer";
+ reg = <0x03009000 0xa0>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
watchdog: watchdog@30090a0 {
compatible = "allwinner,sun50i-h6-wdt",
"allwinner,sun6i-a31-wdt";