ath11k: Add peer max mpdu parameter in peer assoc command

Add peer max mpdu length configuration support in peer_assoc_he
parameters. Noticed low throughput for the STA which
supports HE, HT and not VHT in MU-MIMO case without this
configuration

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588611900-21185-2-git-send-email-tamizhr@codeaurora.org

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index e107a52..dd85312 100644 (file)
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1276,6 +1276,7 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
                                   struct peer_assoc_params *arg)
 {
        const struct ieee80211_sta_he_cap *he_cap = &sta->he_cap;
+       u8 ampdu_factor;
        u16 v;
 
        if (!he_cap->has_he)
@@ -1292,6 +1293,30 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
        /* the top most byte is used to indicate BSS color info */
        arg->peer_he_ops &= 0xffffff;
 
+       /* As per section 26.6.1 11ax Draft5.0, if the Max AMPDU Exponent Extension
+        * in HE cap is zero, use the arg->peer_max_mpdu as calculated while parsing
+        * VHT caps(if VHT caps is present) or HT caps (if VHT caps is not present).
+        *
+        * For non-zero value of Max AMPDU Extponent Extension in HE MAC caps,
+        * if a HE STA sends VHT cap and HE cap IE in assoc request then, use
+        * MAX_AMPDU_LEN_FACTOR as 20 to calculate max_ampdu length.
+        * If a HE STA that does not send VHT cap, but HE and HT cap in assoc
+        * request, then use MAX_AMPDU_LEN_FACTOR as 16 to calculate max_ampdu
+        * length.
+        */
+       ampdu_factor = (he_cap->he_cap_elem.mac_cap_info[3] &
+                       IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) >>
+                       IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_SHIFT;
+
+       if (ampdu_factor) {
+               if (sta->vht_cap.vht_supported)
+                       arg->peer_max_mpdu = (1 << (IEEE80211_HE_VHT_MAX_AMPDU_FACTOR +
+                                                   ampdu_factor)) - 1;
+               else if (sta->ht_cap.ht_supported)
+                       arg->peer_max_mpdu = (1 << (IEEE80211_HE_HT_MAX_AMPDU_FACTOR +
+                                                   ampdu_factor)) - 1;
+       }
+
        if (he_cap->he_cap_elem.phy_cap_info[6] &
            IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
                int bit = 7;