The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset.
There are two variants:
- 1 GiB or 2 GiB of DDR3 memory
- 8 GB or 16 GB eMMC flash
Both variants come with:
- 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not
support Bluetooth)
- an LED 7 segment display with an FD628 controller
- HDMI and AV (CVBS) output
- 2x USB (utilizing both USB ports provided by the SoC)
- micro SD card slot
- serial console (uart_AO) has to be soldered after opening the case
The board seems to be very similar to the P23x and Q20x reference
boards, which is why it includes meson-gx-p23x-q20x.dtsi:
- eMMC reset routed to BOOT_9
- the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference
clock is 32.768KHz on PWM_E
- SD card detection is routed to CARD_6
- vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT)
- uart_AO can be accessed after opening the case and soldering RX, TX
and GND lines onto the exposed solder points (marked with RX, TX and
GND)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+ compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
+ model = "Oranth Tanix TX3 Mini";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
+ };
+};