Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
Axel Dyks <xl@xlsigned.net>
Axel Lin <axel.lin@gmail.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@linaro.org>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@spreadtrum.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@unisoc.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang7@gmail.com>
Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
Ben Gardner <bgardner@wabtec.com>
Frank Zago <fzago@systemfabricworks.com>
Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
+Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
+Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
Sebastian Reichel <sre@kernel.org> <sre@debian.org>
Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
+Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
- 1: enable
RW
+
+What: /sys/class/hwmon/hwmonX/device/pec
+Description:
+ PEC support on I2C devices
+
+ - 0, off, n: disable
+ - 1, on, y: enable
+
+ RW
/sys/devices/system/cpu/cpuX/regs/identification/
/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+ /sys/devices/system/cpu/cpuX/regs/identification/smidr_el1
Date: June 2016
Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
Description: AArch64 CPU registers
'identification' directory exposes the CPU ID registers for
- identifying model and revision of the CPU.
+ identifying model and revision of the CPU and SMCU.
What: /sys/devices/system/cpu/aarch32_el0
Date: May 2021
arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension
support
+ arm64.nosve [ARM64] Unconditionally disable Scalable Vector
+ Extension support
+
+ arm64.nosme [ARM64] Unconditionally disable Scalable Matrix
+ Extension support
+
ataflop= [HW,M68k]
atarimouse= [HW,MOUSE] Atari Mouse
improves system performance, but it may also
expose users to several CPU vulnerabilities.
Equivalent to: nopti [X86,PPC]
- kpti=0 [ARM64]
+ if nokaslr then kpti=0 [ARM64]
nospectre_v1 [X86,PPC]
nobp=0 [S390]
nospectre_v2 [X86,PPC,S390,ARM64]
no_entry_flush [PPC]
no_uaccess_flush [PPC]
mmio_stale_data=off [X86]
+ retbleed=off [X86]
Exceptions:
This does not have any effect on
mds=full,nosmt [X86]
tsx_async_abort=full,nosmt [X86]
mmio_stale_data=full,nosmt [X86]
+ retbleed=auto,nosmt [X86]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
--- /dev/null
+======================================
+HNS3 Performance Monitoring Unit (PMU)
+======================================
+
+HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an
+End Point device to collect performance statistics of HiSilicon SoC NIC.
+On Hip09, each SICL(Super I/O cluster) has one PMU device.
+
+HNS3 PMU supports collection of performance statistics such as bandwidth,
+latency, packet rate and interrupt rate.
+
+Each HNS3 PMU supports 8 hardware events.
+
+HNS3 PMU driver
+===============
+
+The HNS3 PMU driver registers a perf PMU with the name of its sicl id.::
+
+ /sys/devices/hns3_pmu_sicl_<sicl_id>
+
+PMU driver provides description of available events, filter modes, format,
+identifier and cpumask in sysfs.
+
+The "events" directory describes the event code of all supported events
+shown in perf list.
+
+The "filtermode" directory describes the supported filter modes of each
+event.
+
+The "format" directory describes all formats of the config (events) and
+config1 (filter options) fields of the perf_event_attr structure.
+
+The "identifier" file shows version of PMU hardware device.
+
+The "bdf_min" and "bdf_max" files show the supported bdf range of each
+pmu device.
+
+The "hw_clk_freq" file shows the hardware clock frequency of each pmu
+device.
+
+Example usage of checking event code and subevent code::
+
+ $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time
+ config=0x00204
+ $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num
+ config=0x10204
+
+Each performance statistic has a pair of events to get two values to
+calculate real performance data in userspace.
+
+The bits 0~15 of config (here 0x0204) are the true hardware event code. If
+two events have same value of bits 0~15 of config, that means they are
+event pair. And the bit 16 of config indicates getting counter 0 or
+counter 1 of hardware event.
+
+After getting two values of event pair in usersapce, the formula of
+computation to calculate real performance data is:::
+
+ counter 0 / counter 1
+
+Example usage of checking supported filter mode::
+
+ $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num
+ filter mode supported: global/port/port-tc/func/func-queue/
+
+Example usage of perf::
+
+ $# perf list
+ hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event]
+ hns3_pmu_sicl_0/bw_ssu_rpu_time/ [kernel PMU event]
+ ------------------------------------------
+
+ $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000
+ or
+ $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000
+
+
+Filter modes
+--------------
+
+1. global mode
+PMU collect performance statistics for all HNS3 PCIe functions of IO DIE.
+Set the "global" filter option to 1 will enable this mode.
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000
+
+2. port mode
+PMU collect performance statistic of one whole physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0xF in this mode,
+here tc stands for traffic class.
+
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000
+
+3. port-tc mode
+PMU collect performance statistic of one tc of physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this
+mode.
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000
+
+4. func mode
+PMU collect performance statistic of one PF/VF. The function id is BDF of
+PF/VF, its conversion formula::
+
+ func = (bus << 8) + (device << 3) + (function)
+
+for example:
+ BDF func
+ 35:00.0 0x3500
+ 35:00.1 0x3501
+ 35:01.0 0x3508
+
+In this mode, the "queue" filter option must be set to 0xFFFF.
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000
+
+5. func-queue mode
+PMU collect performance statistic of one queue of PF/VF. The function id
+is BDF of PF/VF, the "queue" filter option must be set to the exact queue
+id of function.
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000
+
+6. func-intr mode
+PMU collect performance statistic of one interrupt of PF/VF. The function
+id is BDF of PF/VF, the "intr" filter option must be set to the exact
+interrupt id of function.
+Example usage of perf::
+
+ $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000
hisi-pmu
hisi-pcie-pmu
+ hns3-pmu
imx-ddr
qcom_l2_pmu
qcom_l3_pmu
by default this way, for example.
The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
The *x86* architecture support code recognizes three kernel command line
options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
energy-efficiency. Thus using it for performance reasons may not be a good idea
at all.]
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
In addition to the architecture-level kernel command line options affecting CPU
idle time management, there are parameters affecting individual ``CPUIdle``
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Chromebook Boot Flow
+======================================
+
+Most recent Chromebooks that use device tree are using the opensource
+depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT
+Image`_ which contains an OS image as well as a collection of device trees. It
+is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and
+provide it to the OS.
+
+The scheme that depthcharge_ uses to pick the device tree takes into account
+three variables:
+
+- Board name, specified at depthcharge_ compile time. This is $(BOARD) below.
+- Board revision number, determined at runtime (perhaps by reading GPIO
+ strappings, perhaps via some other method). This is $(REV) below.
+- SKU number, read from GPIO strappings at boot time. This is $(SKU) below.
+
+For recent Chromebooks, depthcharge_ creates a match list that looks like this:
+
+- google,$(BOARD)-rev$(REV)-sku$(SKU)
+- google,$(BOARD)-rev$(REV)
+- google,$(BOARD)-sku$(SKU)
+- google,$(BOARD)
+
+Note that some older Chromebooks use a slightly different list that may
+not include SKU matching or may prioritize SKU/rev differently.
+
+Note that for some boards there may be extra board-specific logic to inject
+extra compatibles into the list, but this is uncommon.
+
+Depthcharge_ will look through all device trees in the `FIT Image`_ trying to
+find one that matches the most specific compatible. It will then look
+through all device trees in the `FIT Image`_ trying to find the one that
+matches the *second most* specific compatible, etc.
+
+When searching for a device tree, depthcharge_ doesn't care where the
+compatible string falls within a device tree's root compatible string array.
+As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device
+trees:
+
+- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180"
+- "google,lazor", "qcom,sc7180"
+
+Then depthcharge_ will pick the first device tree even though
+"google,lazor-rev4-sku0" was the second compatible listed in that device tree.
+This is because it is a more specific compatible than "google,lazor".
+
+It should be noted that depthcharge_ does not have any smarts to try to
+match board or SKU revisions that are "close by". That is to say that
+if depthcharge_ knows it's on "rev4" of a board but there is no "rev4"
+device tree then depthcharge_ *won't* look for a "rev3" device tree.
+
+In general when any significant changes are made to a board the board
+revision number is increased even if none of those changes need to
+be reflected in the device tree. Thus it's fairly common to see device
+trees with multiple revisions.
+
+It should be noted that, taking into account the above system that
+depthcharge_ has, the most flexibility is achieved if the device tree
+supporting the newest revision(s) of a board omits the "-rev{REV}"
+compatible strings. When this is done then if you get a new board
+revision and try to run old software on it then we'll at pick the
+newest device tree we know about.
+
+.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/
+.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html
.. toctree::
:maxdepth: 1
+ google/chromebook-boot-flow
+
ixp4xx
marvell
Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010.
+HWCAP2_EBF16
+
+ Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
+
4. Unused AT_HWCAP bits
-----------------------
0000000000000000 0000ffffffffffff 256TB user
ffff000000000000 ffff7fffffffffff 128TB kernel logical memory map
[ffff600000000000 ffff7fffffffffff] 32TB [kasan shadow region]
- ffff800000000000 ffff800007ffffff 128MB bpf jit region
- ffff800008000000 ffff80000fffffff 128MB modules
- ffff800010000000 fffffbffefffffff 124TB vmalloc
+ ffff800000000000 ffff800007ffffff 128MB modules
+ ffff800008000000 fffffbffefffffff 124TB vmalloc
fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down)
fffffbfffe000000 fffffbfffe7fffff 8MB [guard region]
fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space
0000000000000000 000fffffffffffff 4PB user
fff0000000000000 ffff7fffffffffff ~4PB kernel logical memory map
[fffd800000000000 ffff7fffffffffff] 512TB [kasan shadow region]
- ffff800000000000 ffff800007ffffff 128MB bpf jit region
- ffff800008000000 ffff80000fffffff 128MB modules
- ffff800010000000 fffffbffefffffff 124TB vmalloc
+ ffff800000000000 ffff800007ffffff 128MB modules
+ ffff800008000000 fffffbffefffffff 124TB vmalloc
fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down)
fffffbfffe000000 fffffbfffe7fffff 8MB [guard region]
fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A57 | #1319537 | ARM64_ERRATUM_1319367 |
+----------------+-----------------+-----------------+-----------------------------+
+| ARM | Cortex-A57 | #1742098 | ARM64_ERRATUM_1742098 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A72 | #853709 | N/A |
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A72 | #1319367 | ARM64_ERRATUM_1319367 |
+----------------+-----------------+-----------------+-----------------------------+
+| ARM | Cortex-A72 | #1655431 | ARM64_ERRATUM_1742098 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 |
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A76 | #1188873,1418040| ARM64_ERRATUM_1418040 |
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 |
+----------------+-----------------+-----------------+-----------------------------+
+| ARM | Cortex-A510 | #2441009 | ARM64_ERRATUM_2441009 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 |
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 |
Memory Protection Keys
======================
-Memory Protection Keys for Userspace (PKU aka PKEYs) is a feature
-which is found on Intel's Skylake (and later) "Scalable Processor"
-Server CPUs. It will be available in future non-server Intel parts
-and future AMD processors.
-
-For anyone wishing to test or use this feature, it is available in
-Amazon's EC2 C5 instances and is known to work there using an Ubuntu
-17.04 image.
-
-Memory Protection Keys provides a mechanism for enforcing page-based
-protections, but without requiring modification of the page tables
-when an application changes protection domains. It works by
-dedicating 4 previously ignored bits in each page table entry to a
-"protection key", giving 16 possible keys.
-
-There is also a new user-accessible register (PKRU) with two separate
-bits (Access Disable and Write Disable) for each key. Being a CPU
-register, PKRU is inherently thread-local, potentially giving each
+Memory Protection Keys provide a mechanism for enforcing page-based
+protections, but without requiring modification of the page tables when an
+application changes protection domains.
+
+Pkeys Userspace (PKU) is a feature which can be found on:
+ * Intel server CPUs, Skylake and later
+ * Intel client CPUs, Tiger Lake (11th Gen Core) and later
+ * Future AMD CPUs
+
+Pkeys work by dedicating 4 previously Reserved bits in each page table entry to
+a "protection key", giving 16 possible keys.
+
+Protections for each key are defined with a per-CPU user-accessible register
+(PKRU). Each of these is a 32-bit register storing two bits (Access Disable
+and Write Disable) for each of 16 keys.
+
+Being a CPU register, PKRU is inherently thread-local, potentially giving each
thread a different set of protections from every other thread.
-There are two new instructions (RDPKRU/WRPKRU) for reading and writing
-to the new register. The feature is only available in 64-bit mode,
-even though there is theoretically space in the PAE PTEs. These
-permissions are enforced on data access only and have no effect on
-instruction fetches.
+There are two instructions (RDPKRU/WRPKRU) for reading and writing to the
+register. The feature is only available in 64-bit mode, even though there is
+theoretically space in the PAE PTEs. These permissions are enforced on data
+access only and have no effect on instruction fetches.
Syscalls
========
items:
- enum:
- altr,socfpga-arria10-socdk
- - enclustra,mercury-aa1
+ - const: altr,socfpga-arria10
+ - const: altr,socfpga
+
+ - description: Mercury+ AA1 boards
+ items:
+ - enum:
+ - google,chameleon-v3
+ - const: enclustra,mercury-aa1
- const: altr,socfpga-arria10
- const: altr,socfpga
items:
- enum:
- altr,socfpga-stratix10-socdk
+ - altr,socfpga-stratix10-swvp
- const: altr,socfpga-stratix10
- description: SoCFPGA VT
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+ - Joel Stanley <joel@jms.id.au>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: AST2400 based boards
+ items:
+ - enum:
+ - facebook,galaxy100-bmc
+ - facebook,wedge100-bmc
+ - facebook,wedge40-bmc
+ - microsoft,olympus-bmc
+ - quanta,q71l-bmc
+ - tyan,palmetto-bmc
+ - yadro,vesnin-bmc
+ - const: aspeed,ast2400
+
+ - description: AST2500 based boards
+ items:
+ - enum:
+ - amd,ethanolx-bmc
+ - ampere,mtjade-bmc
+ - aspeed,ast2500-evb
+ - asrock,e3c246d4i-bmc
+ - asrock,romed8hm3-bmc
+ - bytedance,g220a-bmc
+ - facebook,cmm-bmc
+ - facebook,minipack-bmc
+ - facebook,tiogapass-bmc
+ - facebook,yamp-bmc
+ - facebook,yosemitev2-bmc
+ - facebook,wedge400-bmc
+ - hxt,stardragon4800-rep2-bmc
+ - ibm,mihawk-bmc
+ - ibm,mowgli-bmc
+ - ibm,romulus-bmc
+ - ibm,swift-bmc
+ - ibm,witherspoon-bmc
+ - ingrasys,zaius-bmc
+ - inspur,fp5280g2-bmc
+ - inspur,nf5280m6-bmc
+ - inspur,on5263m5-bmc
+ - intel,s2600wf-bmc
+ - inventec,lanyang-bmc
+ - lenovo,hr630-bmc
+ - lenovo,hr855xg2-bmc
+ - portwell,neptune-bmc
+ - qcom,centriq2400-rep-bmc
+ - supermicro,x11spi-bmc
+ - tyan,s7106-bmc
+ - tyan,s8036-bmc
+ - yadro,nicole-bmc
+ - yadro,vegman-n110-bmc
+ - yadro,vegman-rx20-bmc
+ - yadro,vegman-sx20-bmc
+ - const: aspeed,ast2500
+
+ - description: AST2600 based boards
+ items:
+ - enum:
+ - aspeed,ast2600-evb
+ - aspeed,ast2600-evb-a1
+ - facebook,bletchley-bmc
+ - facebook,cloudripper-bmc
+ - facebook,elbert-bmc
+ - facebook,fuji-bmc
+ - ibm,everest-bmc
+ - ibm,rainier-bmc
+ - ibm,tacoma-bmc
+ - inventec,transformer-bmc
+ - jabil,rbp-bmc
+ - nuvia,dc-scm-bmc
+ - quanta,s6q-bmc
+ - const: aspeed,ast2600
+
+additionalProperties: true
- const: microchip,sama7g5
- const: microchip,sama7
- - description: Microchip LAN9662 PCB8291 Evaluation Board.
+ - description: Microchip LAN9662 Evaluation Boards.
items:
- - const: microchip,lan9662-pcb8291
+ - enum:
+ - microchip,lan9662-pcb8291
+ - microchip,lan9662-pcb8309
- const: microchip,lan9662
- const: microchip,lan966
- const: brcm,bcm53012
- const: brcm,bcm4708
+ - description: BCM53015 based boards
+ items:
+ - enum:
+ - meraki,mr26
+ - const: brcm,bcm53015
+ - const: brcm,bcm4708
+
- description: BCM53016 based boards
items:
- enum:
- const: brcm,bcm47622
- const: brcm,bcmbca
+ - description: BCM4912 based boards
+ items:
+ - enum:
+ - asus,gt-ax6000
+ - brcm,bcm94912
+ - const: brcm,bcm4912
+ - const: brcm,bcmbca
+
+ - description: BCM63138 based boards
+ items:
+ - enum:
+ - brcm,bcm963138
+ - brcm,BCM963138DVT
+ - const: brcm,bcm63138
+ - const: brcm,bcmbca
+
+ - description: BCM63146 based boards
+ items:
+ - enum:
+ - brcm,bcm963146
+ - const: brcm,bcm63146
+ - const: brcm,bcmbca
+
+ - description: BCM63148 based boards
+ items:
+ - enum:
+ - brcm,bcm963148
+ - const: brcm,bcm63148
+ - const: brcm,bcmbca
+
+ - description: BCM63158 based boards
+ items:
+ - enum:
+ - brcm,bcm963158
+ - const: brcm,bcm63158
+ - const: brcm,bcmbca
+
+ - description: BCM63178 based boards
+ items:
+ - enum:
+ - brcm,bcm963178
+ - const: brcm,bcm63178
+ - const: brcm,bcmbca
+
+ - description: BCM6756 based boards
+ items:
+ - enum:
+ - brcm,bcm96756
+ - const: brcm,bcm6756
+ - const: brcm,bcmbca
+
+ - description: BCM6813 based boards
+ items:
+ - enum:
+ - brcm,bcm96813
+ - const: brcm,bcm6813
+ - const: brcm,bcmbca
+
+ - description: BCM6846 based boards
+ items:
+ - enum:
+ - brcm,bcm96846
+ - const: brcm,bcm6846
+ - const: brcm,bcmbca
+
+ - description: BCM6855 based boards
+ items:
+ - enum:
+ - brcm,bcm96855
+ - const: brcm,bcm6855
+ - const: brcm,bcmbca
+
+ - description: BCM6856 based boards
+ items:
+ - enum:
+ - brcm,bcm96856
+ - const: brcm,bcm6856
+ - const: brcm,bcmbca
+
+ - description: BCM6858 based boards
+ items:
+ - enum:
+ - brcm,bcm96858
+ - const: brcm,bcm6858
+ - const: brcm,bcmbca
+
+ - description: BCM6878 based boards
+ items:
+ - enum:
+ - brcm,bcm96878
+ - const: brcm,bcm6878
+ - const: brcm,bcmbca
+
additionalProperties: true
...
- qcom,kpss-acc-v1
- qcom,kpss-acc-v2
- qcom,msm8226-smp
+ - qcom,msm8909-smp
# Only valid on ARM 32-bit, see above for ARM v8 64-bit
- qcom,msm8916-smp
- renesas,apmu
+++ /dev/null
-NXP i.MX System Controller Firmware (SCFW)
---------------------------------------------------------------------
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-The AP communicates with the SC using a multi-ported MU module found
-in the LSIO subsystem. The current definition of this MU module provides
-5 remote AP connections to the SC to support up to 5 execution environments
-(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
-with the LSIO DSC IP bus. The SC firmware will communicate with this MU
-using the MSI bus.
-
-System Controller Device Node:
-============================================================
-
-The scu node with the following properties shall be under the /firmware/ node.
-
-Required properties:
--------------------
-- compatible: should be "fsl,imx-scu".
-- mbox-names: should include "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
- include "gip3" if want to support general MU interrupt.
-- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
- rx, and 1 optional MU channel for general interrupt.
- All MU channels must be in the same MU instance.
- Cross instances are not allowed. The MU instance can only
- be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
- to make sure use the one which is not conflict with other
- execution environments. e.g. ATF.
- Note:
- Channel 0 must be "tx0" or "rx0".
- Channel 1 must be "tx1" or "rx1".
- Channel 2 must be "tx2" or "rx2".
- Channel 3 must be "tx3" or "rx3".
- General interrupt rx channel must be "gip3".
- e.g.
- mboxes = <&lsio_mu1 0 0
- &lsio_mu1 0 1
- &lsio_mu1 0 2
- &lsio_mu1 0 3
- &lsio_mu1 1 0
- &lsio_mu1 1 1
- &lsio_mu1 1 2
- &lsio_mu1 1 3
- &lsio_mu1 3 3>;
- See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
- for detailed mailbox binding.
-
-Note: Each mu which supports general interrupt should have an alias correctly
-numbered in "aliases" node.
-e.g.
-aliases {
- mu1 = &lsio_mu1;
-};
-
-i.MX SCU Client Device Node:
-============================================================
-
-Client nodes are maintained as children of the relevant IMX-SCU device node.
-
-Power domain bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding for the SCU power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8qm-scu-pd",
- "fsl,imx8qxp-scu-pd"
- followed by "fsl,scu-pd"
-
-- #power-domain-cells: Must be 1. Contains the Resource ID used by
- SCU commands.
- See detailed Resource ID list from:
- include/dt-bindings/firmware/imx/rsrc.h
-
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8dxl-clk"
- "fsl,imx8qm-clk"
- "fsl,imx8qxp-clk"
- followed by "fsl,scu-clk"
-- #clock-cells: Should be 2.
- Contains the Resource and Clock ID value.
-- clocks: List of clock specifiers, must contain an entry for
- each required entry in clock-names
-- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Pinctrl bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the i.MX common pinctrl binding[3].
-
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8qm-iomuxc",
- "fsl,imx8qxp-iomuxc",
- "fsl,imx8dxl-iomuxc".
-
-Required properties for Pinctrl sub nodes:
-- fsl,pins: Each entry consists of 3 integers which represents
- the mux and config setting for one pin. The first 2
- integers <pin_id mux_mode> are specified using a
- PIN_FUNC_ID macro, which can be found in
- <dt-bindings/pinctrl/pads-imx8qm.h>,
- <dt-bindings/pinctrl/pads-imx8qxp.h>,
- <dt-bindings/pinctrl/pads-imx8dxl.h>.
- The last integer CONFIG is the pad setting value like
- pull-up on this pin.
-
- Please refer to i.MX8QXP Reference Manual for detailed
- CONFIG settings.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
-
-RTC bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be "fsl,imx8qxp-sc-rtc";
-
-OCOTP bindings based on SCU Message Protocol
-------------------------------------------------------------
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8qm-scu-ocotp",
- "fsl,imx8qxp-scu-ocotp".
-- #address-cells: Must be 1. Contains byte index
-- #size-cells: Must be 1. Contains byte length
-
-Optional Child nodes:
-
-- Data cells of ocotp:
- Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Watchdog bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
- "fsl,imx8qxp-sc-wdt"
- followed by "fsl,imx-sc-wdt";
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-SCU key bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
- "fsl,imx8qxp-sc-key"
- followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Thermal bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: Should be :
- "fsl,imx8qxp-sc-thermal"
- followed by "fsl,imx-sc-thermal";
-
-- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
- for a description.
-
-Example (imx8qxp):
--------------
-aliases {
- mu1 = &lsio_mu1;
-};
-
-lsio_mu1: mailbox@5d1c0000 {
- ...
- #mbox-cells = <2>;
-};
-
-firmware {
- scu {
- compatible = "fsl,imx-scu";
- mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3",
- "gip3";
- mboxes = <&lsio_mu1 0 0
- &lsio_mu1 0 1
- &lsio_mu1 0 2
- &lsio_mu1 0 3
- &lsio_mu1 1 0
- &lsio_mu1 1 1
- &lsio_mu1 1 2
- &lsio_mu1 1 3
- &lsio_mu1 3 3>;
-
- clk: clk {
- compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
- #clock-cells = <2>;
- };
-
- iomuxc {
- compatible = "fsl,imx8qxp-iomuxc";
-
- pinctrl_lpuart0: lpuart0grp {
- fsl,pins = <
- SC_P_UART0_RX_ADMA_UART0_RX 0x06000020
- SC_P_UART0_TX_ADMA_UART0_TX 0x06000020
- >;
- };
- ...
- };
-
- ocotp: imx8qx-ocotp {
- compatible = "fsl,imx8qxp-scu-ocotp";
- #address-cells = <1>;
- #size-cells = <1>;
-
- fec_mac0: mac@2c4 {
- reg = <0x2c4 8>;
- };
- };
-
- pd: imx8qx-pd {
- compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
- #power-domain-cells = <1>;
- };
-
- rtc: rtc {
- compatible = "fsl,imx8qxp-sc-rtc";
- };
-
- scu_key: scu-key {
- compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
- linux,keycodes = <KEY_POWER>;
- };
-
- watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
- };
-
- tsens: thermal-sensor {
- compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
- #thermal-sensor-cells = <1>;
- };
- };
-};
-
-serial@5a060000 {
- ...
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart0>;
- clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
- clock-names = "ipg";
- power-domains = <&pd IMX_SC_R_UART_0>;
-};
- enum:
- toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
- toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
+ - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
- toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
- const: toradex,apalis_imx6q
- const: fsl,imx6q
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
items:
- enum:
- - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board
- - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3
- - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board
- - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board
+ - toradex,colibri-imx6ull-aster # Aster Carrier Board
+ - toradex,colibri-imx6ull-eval # Colibri Evaluation Board V3
+ - toradex,colibri-imx6ull-iris # Iris Carrier Board
+ - toradex,colibri-imx6ull-iris-v2 # Iris V2 Carrier Board
- const: toradex,colibri-imx6ull # Colibri iMX6ULL Module
- const: fsl,imx6ull
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
items:
- enum:
- - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board
- - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3
- - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board
- - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board
+ - toradex,colibri-imx6ull-emmc-aster # Aster Carrier Board
+ - toradex,colibri-imx6ull-emmc-eval # Colibri Evaluation B. V3
+ - toradex,colibri-imx6ull-emmc-iris # Iris Carrier Board
+ - toradex,colibri-imx6ull-emmc-iris-v2 # Iris V2 Carrier Board
- const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
- const: fsl,imx6ull
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
items:
- enum:
- - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3
- - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board
- - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board
- - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board
+ - toradex,colibri-imx6ull-wifi-eval # Colibri Eval. B. V3
+ - toradex,colibri-imx6ull-wifi-aster # Aster Carrier Board
+ - toradex,colibri-imx6ull-wifi-iris # Iris Carrier Board
+ - toradex,colibri-imx6ull-wifi-iris-v2 # Iris V2 Carrier Board
- const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module
- const: fsl,imx6ull
- enum:
- toradex,colibri-imx7s-aster # Module on Aster Carrier Board
- toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3
+ - toradex,colibri-imx7s-iris # Module on Iris Carrier Board
+ - toradex,colibri-imx7s-iris-v2 # Module on Iris Carrier Board V2
- const: toradex,colibri-imx7s
- const: fsl,imx7s
- description: i.MX7D Boards with Toradex Colibri i.MX7D Module
items:
- enum:
- - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board
- - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3
+ - toradex,colibri-imx7d-aster # Aster Carrier Board
+ - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+ - toradex,colibri-imx7d-iris # Iris Carrier Board
+ - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
- const: toradex,colibri-imx7d
- const: fsl,imx7d
- enum:
- toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3
+ - toradex,colibri-imx7d-emmc-iris # Module on Iris Carrier Board
+ - toradex,colibri-imx7d-emmc-iris-v2 # Module on Iris Carrier Board V2
- const: toradex,colibri-imx7d-emmc
- const: fsl,imx7d
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- const: fsl,imx8mm
+ - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+ items:
+ - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+ - const: phytec,imx8mm-phycore-som # phyCORE-i.MX8MM SoM
+ - const: fsl,imx8mm
+
- description: Variscite VAR-SOM-MX8MM based boards
items:
- const: variscite,var-som-mx8mm-symphony
- description: i.MX8MP based Boards
items:
- enum:
+ - dh,imx8mp-dhcom-som # i.MX8MP DHCOM SoM
+ - dh,imx8mp-dhcom-pdk2 # i.MX8MP DHCOM SoM on PDK2 board
- fsl,imx8mp-evk # i.MX8MP EVK Board
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- toradex,verdin-imx8mp # Verdin iMX8M Plus Modules
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
- const: fsl,imx8mp
+ - description:
+ TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+ variants. It is designed to be soldered on different carrier boards.
+ All CPU variants use the same device tree hence only one compatible
+ is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+ version as an industrial computing device.
+ items:
+ - enum:
+ - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+ - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+ - const: fsl,imx8mp
+
- description: i.MX8MQ based Boards
items:
- enum:
- fsl,imx8ulp-evk # i.MX8ULP EVK Board
- const: fsl,imx8ulp
+ - description: i.MX93 based Boards
+ items:
+ - enum:
+ - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board
+ - const: fsl,imx93
+
- description:
Freescale Vybrid Platform Device Tree Bindings
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Alleycat5 (98DX25xx) Reference Design
+ items:
+ - enum:
+ - marvell,rd-ac5
+ - const: marvell,ac5
+
+ - description: Alleycat5X (98DX35xx) Reference Design
+ items:
+ - enum:
+ - marvell,rd-ac5x
+ - const: marvell,ac5x
+ - const: marvell,ac5
+
+additionalProperties: true
+
+...
- enum:
- mediatek,mt8183-evb
- const: mediatek,mt8183
+ - description: Google Hayato
+ items:
+ - const: google,hayato-rev1
+ - const: google,hayato
+ - const: mediatek,mt8192
+ - description: Google Spherion (Acer Chromebook 514)
+ items:
+ - const: google,spherion-rev3
+ - const: google,spherion-rev2
+ - const: google,spherion-rev1
+ - const: google,spherion-rev0
+ - const: google,spherion
+ - const: mediatek,mt8192
+ - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+ items:
+ - enum:
+ - google,tomato-rev2
+ - google,tomato-rev1
+ - const: google,tomato
+ - const: mediatek,mt8195
+ - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+ items:
+ - const: google,tomato-rev4
+ - const: google,tomato-rev3
+ - const: google,tomato
+ - const: mediatek,mt8195
+ - items:
+ - enum:
+ - mediatek,mt8186-evb
+ - const: mediatek,mt8186
- items:
- enum:
- mediatek,mt8192-evb
- mediatek,mt8135-pericfg
- mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg
+ - mediatek,mt8186-pericfg
- mediatek,mt8195-pericfg
- mediatek,mt8516-pericfg
- const: syscon
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
properties:
$nodename:
- nuvoton,npcm750-evb # NPCM750 evaluation board
- const: nuvoton,npcm750
+ - description: NPCM845 based boards
+ items:
+ - enum:
+ - nuvoton,npcm845-evb # NPCM845 evaluation board
+ - const: nuvoton,npcm845
+
additionalProperties: true
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
description:
The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
- enum:
- nuvoton,wpcm450-gcr
- nuvoton,npcm750-gcr
+ - nuvoton,npcm845-gcr
- const: syscon
- const: simple-mfd
title: QCOM device tree bindings
maintainers:
- - Stephen Boyd <sboyd@codeaurora.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
Some qcom based bootloaders identify the dtb blob based on a set of
msm8992
msm8994
msm8996
+ msm8998
+ qcs404
sa8155p
sa8540p
sc7180
sc7280
sc8180x
sc8280xp
+ sda660
sdm630
sdm632
+ sdm636
sdm660
sdm845
sdx55
sdx65
+ sm6125
+ sm6350
sm7225
sm8150
sm8250
A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
foundry 2.
+ There are many devices in the list below that run the standard ChromeOS
+ bootloader setup and use the open source depthcharge bootloader to boot the
+ OS. These devices do not use the scheme described above. For details, see:
+ https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+
properties:
$nodename:
const: "/"
- const: qcom,msm8974
- items:
- - enum:
- - alcatel,idol347
- - const: qcom,msm8916-mtp/1
- const: qcom,msm8916-mtp
+ - const: qcom,msm8916-mtp/1
- const: qcom,msm8916
- items:
- enum:
- - longcheer,l8150
+ - alcatel,idol347
+ - asus,z00l
+ - huawei,g7
+ - longcheer,l8910
- samsung,a3u-eur
- samsung,a5u-eur
+ - samsung,j5
+ - samsung,serranove
+ - wingtech,wt88047
+ - const: qcom,msm8916
+
+ - items:
+ - const: longcheer,l8150
+ - const: qcom,msm8916-v1-qrd/9-v1
- const: qcom,msm8916
+ - items:
+ - enum:
+ - lg,bullhead
+ - microsoft,talkman
+ - xiaomi,libra
+ - const: qcom,msm8992
+
- items:
- enum:
- sony,karin_windy
+ - const: qcom,apq8094
+
+ - items:
+ - enum:
+ - huawei,angler
+ - microsoft,cityman
+ - sony,ivy-row
- sony,karin-row
- sony,satsuki-row
- sony,sumire-row
- sony,suzuran-row
- - qcom,msm8994
- - const: qcom,apq8094
+ - const: qcom,msm8994
- items:
- enum:
- sony,kagura-row
- sony,keyaki-row
- xiaomi,gemini
+ - xiaomi,natrium
- xiaomi,scorpio
- const: qcom,msm8996
+ - items:
+ - enum:
+ - asus,novago-tp370ql
+ - fxtec,pro1
+ - hp,envy-x2
+ - lenovo,miix-630
+ - oneplus,cheeseburger
+ - oneplus,dumpling
+ - qcom,msm8998-mtp
+ - sony,xperia-lilac
+ - sony,xperia-maple
+ - sony,xperia-poplar
+ - const: qcom,msm8998
+
- items:
- enum:
- qcom,ipq4019-ap-dk01.1-c1
- qcom,ipq8074-hk10-c2
- const: qcom,ipq8074
- - items:
+ - description: Qualcomm Technologies, Inc. SC7180 IDP
+ items:
- enum:
- qcom,sc7180-idp
- const: qcom,sc7180
- - items:
- - enum:
- - qcom,sc7280-crd
- - qcom,sc7280-idp
- - qcom,sc7280-idp2
- - google,hoglin
- - google,piglin
- - google,senor
+ - description: HP Chromebook x2 11c (rev1 - 2)
+ items:
+ - const: google,coachz-rev1
+ - const: google,coachz-rev2
+ - const: qcom,sc7180
+
+ - description: HP Chromebook x2 11c (newest rev)
+ items:
+ - const: google,coachz
+ - const: qcom,sc7180
+
+ - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+ items:
+ - const: google,coachz-rev1-sku0
+ - const: google,coachz-rev2-sku0
+ - const: qcom,sc7180
+
+ - description: HP Chromebook x2 11c with LTE (newest rev)
+ items:
+ - const: google,coachz-sku0
+ - const: qcom,sc7180
+
+ - description: Lenovo Chromebook Duet 5 13 (rev2)
+ items:
+ - const: google,homestar-rev2
+ - const: google,homestar-rev23
+ - const: qcom,sc7180
+
+ - description: Lenovo Chromebook Duet 5 13 (rev3)
+ items:
+ - const: google,homestar-rev3
+ - const: qcom,sc7180
+
+ - description: Lenovo Chromebook Duet 5 13 (newest rev)
+ items:
+ - const: google,homestar
+ - const: qcom,sc7180
+
+ - description: Google Kingoftown (rev0)
+ items:
+ - const: google,kingoftown-rev0
+ - const: qcom,sc7180
+
+ - description: Google Kingoftown (newest rev)
+ items:
+ - const: google,kingoftown
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 (rev0)
+ items:
+ - const: google,lazor-rev0
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 (rev1 - 2)
+ items:
+ - const: google,lazor-rev1
+ - const: google,lazor-rev2
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 (rev3 - 8)
+ items:
+ - const: google,lazor-rev3
+ - const: google,lazor-rev4
+ - const: google,lazor-rev5
+ - const: google,lazor-rev6
+ - const: google,lazor-rev7
+ - const: google,lazor-rev8
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 (newest rev)
+ items:
+ - const: google,lazor
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+ items:
+ - const: google,lazor-rev1-sku2
+ - const: google,lazor-rev2-sku2
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+ items:
+ - const: google,lazor-rev3-sku2
+ - const: google,lazor-rev4-sku2
+ - const: google,lazor-rev5-sku2
+ - const: google,lazor-rev6-sku2
+ - const: google,lazor-rev7-sku2
+ - const: google,lazor-rev8-sku2
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+ items:
+ - const: google,lazor-sku2
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+ items:
+ - const: google,lazor-rev1-sku0
+ - const: google,lazor-rev2-sku0
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+ items:
+ - const: google,lazor-rev3-sku0
+ - const: google,lazor-rev4-sku0
+ - const: google,lazor-rev5-sku0
+ - const: google,lazor-rev6-sku0
+ - const: google,lazor-rev7-sku0
+ - const: google,lazor-rev8-sku0
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook Spin 513 with LTE (newest rev)
+ items:
+ - const: google,lazor-sku0
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook 511 (rev4 - rev8)
+ items:
+ - const: google,lazor-rev4-sku4
+ - const: google,lazor-rev5-sku4
+ - const: google,lazor-rev6-sku4
+ - const: google,lazor-rev7-sku4
+ - const: google,lazor-rev8-sku4
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook 511 (newest rev)
+ items:
+ - const: google,lazor-sku4
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook 511 without Touchscreen (rev4)
+ items:
+ - const: google,lazor-rev4-sku5
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+ items:
+ - const: google,lazor-rev5-sku5
+ - const: google,lazor-rev5-sku6
+ - const: google,lazor-rev6-sku6
+ - const: google,lazor-rev7-sku6
+ - const: google,lazor-rev8-sku6
+ - const: qcom,sc7180
+
+ - description: Acer Chromebook 511 without Touchscreen (newest rev)
+ items:
+ - const: google,lazor-sku6
+ - const: qcom,sc7180
+
+ - description: Google Mrbland with AUO panel (rev0)
+ items:
+ - const: google,mrbland-rev0-sku0
+ - const: qcom,sc7180
+
+ - description: Google Mrbland with AUO panel (newest rev)
+ items:
+ - const: google,mrbland-sku1536
+ - const: qcom,sc7180
+
+ - description: Google Mrbland with BOE panel (rev0)
+ items:
+ - const: google,mrbland-rev0-sku16
+ - const: qcom,sc7180
+
+ - description: Google Mrbland with BOE panel (newest rev)
+ items:
+ - const: google,mrbland-sku1024
+ - const: google,mrbland-sku768
+ - const: qcom,sc7180
+
+ - description: Google Pazquel with Parade (newest rev)
+ items:
+ - const: google,pazquel-sku5
+ - const: qcom,sc7180
+
+ - description: Google Pazquel with TI (newest rev)
+ items:
+ - const: google,pazquel-sku1
+ - const: qcom,sc7180
+
+ - description: Google Pazquel with LTE and Parade (newest rev)
+ items:
+ - const: google,pazquel-sku4
+ - const: qcom,sc7180
+
+ - description: Google Pazquel with LTE and TI (newest rev)
+ items:
+ - const: google,pazquel-sku0
+ - const: google,pazquel-sku2
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 (rev1)
+ items:
+ - const: google,pompom-rev1
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 (rev2)
+ items:
+ - const: google,pompom-rev2
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 (newest rev)
+ items:
+ - const: google,pompom
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+ items:
+ - const: google,pompom-rev1-sku0
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+ items:
+ - const: google,pompom-rev2-sku0
+ - const: qcom,sc7180
+
+ - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+ items:
+ - const: google,pompom-sku0
+ - const: qcom,sc7180
+
+ - description: Google Quackingstick (newest rev)
+ items:
+ - const: google,quackingstick-sku1537
+ - const: qcom,sc7180
+
+ - description: Google Quackingstick with LTE (newest rev)
+ items:
+ - const: google,quackingstick-sku1536
+ - const: qcom,sc7180
+
+ - description: Google Trogdor (newest rev)
+ items:
+ - const: google,trogdor
+ - const: qcom,sc7180
+
+ - description: Google Trogdor with LTE (newest rev)
+ items:
+ - const: google,trogdor-sku0
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+ items:
+ - const: google,wormdingler-rev0-sku16
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+ items:
+ - const: google,wormdingler-sku1024
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+ items:
+ - const: google,wormdingler-sku1025
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+ items:
+ - const: google,wormdingler-rev0-sku0
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+ items:
+ - const: google,wormdingler-sku0
+ - const: qcom,sc7180
+
+ - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+ items:
+ - const: google,wormdingler-sku1
+ - const: qcom,sc7180
+
+ - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+ items:
+ - const: qcom,sc7280-crd
+ - const: google,hoglin-rev3
+ - const: google,hoglin-rev4
+ - const: google,piglin-rev3
+ - const: google,piglin-rev4
+ - const: qcom,sc7280
+
+ - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+ items:
+ - const: google,hoglin
+ - const: qcom,sc7280
+
+ - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+ items:
+ - const: qcom,sc7280-idp
+ - const: google,senor
+ - const: qcom,sc7280
+
+ - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+ items:
+ - const: qcom,sc7280-idp2
+ - const: google,piglin
+ - const: qcom,sc7280
+
+ - description: Google Herobrine (newest rev)
+ items:
+ - const: google,herobrine
+ - const: qcom,sc7280
+
+ - description: Google Villager (newest rev)
+ items:
+ - const: google,villager
- const: qcom,sc7280
- items:
- items:
- enum:
+ - lenovo,thinkpad-x13s
+ - qcom,sc8280xp-crd
- qcom,sc8280xp-qrd
- const: qcom,sc8280xp
+ - items:
+ - enum:
+ - sony,discovery-row
+ - sony,kirin-row
+ - sony,pioneer-row
+ - sony,voyager-row
+ - const: qcom,sdm630
+
+ - items:
+ - enum:
+ - inforce,ifc6560
+ - const: qcom,sda660
+
- items:
- enum:
- fairphone,fp3
- const: qcom,sdm632
+ - items:
+ - enum:
+ - sony,mermaid-row
+ - const: qcom,sdm636
+
- items:
- enum:
- xiaomi,lavender
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
+ - items:
+ - enum:
+ - qcom,qcs404-evb-1000
+ - qcom,qcs404-evb-4000
+ - const: qcom,qcs404-evb
+ - const: qcom,qcs404
+
- items:
- enum:
- qcom,sa8155p-adp
- qcom,sa8295p-adp
- const: qcom,sa8540p
+ - items:
+ - enum:
+ - lenovo,yoga-c630
+ - lg,judyln
+ - lg,judyp
+ - oneplus,enchilada
+ - oneplus,fajita
+ - qcom,sdm845-mtp
+ - shift,axolotl
+ - samsung,w737
+ - sony,akari-row
+ - sony,akatsuki-row
+ - sony,apollo-row
+ - thundercomm,db845c
+ - xiaomi,beryllium
+ - xiaomi,polaris
+ - const: qcom,sdm845
+
+ - items:
+ - enum:
+ - sony,pdx201
+ - const: qcom,sm6125
+
+ - items:
+ - enum:
+ - sony,pdx213
+ - const: qcom,sm6350
+
- items:
- enum:
- fairphone,fp4
- items:
- enum:
+ - microsoft,surface-duo
+ - qcom,sm8150-hdk
- qcom,sm8150-mtp
+ - sony,bahamut-generic
+ - sony,griffin-generic
- const: qcom,sm8150
- items:
- enum:
- qcom,qrb5165-rb5
+ - qcom,sm8250-hdk
- qcom,sm8250-mtp
+ - sony,pdx203-generic
+ - sony,pdx206-generic
- const: qcom,sm8250
- items:
- enum:
+ - microsoft,surface-duo2
- qcom,sm8350-hdk
- qcom,sm8350-mtp
+ - sony,pdx214-generic
+ - sony,pdx215-generic
- const: qcom,sm8350
- items:
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Renesas Product Register
-
-maintainers:
- - Geert Uytterhoeven <geert+renesas@glider.be>
- - Magnus Damm <magnus.damm@gmail.com>
-
-description: |
- Most Renesas ARM SoCs have a Product Register or Boundary Scan ID
- Register that allows to retrieve SoC product and revision information.
- If present, a device node for this register should be added.
-
-properties:
- compatible:
- enum:
- - renesas,prr
- - renesas,bsid
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- - |
- prr: chipid@ff000044 {
- compatible = "renesas,prr";
- reg = <0xff000044 4>;
- };
- const: vamrs,rk3399pro-vmarc-som
- const: rockchip,rk3399pro
+ - description: Radxa ROCK Pi S
+ items:
+ - const: radxa,rockpis
+ - const: rockchip,rk3308
+
- description: Radxa Rock2 Square
items:
- const: radxa,rock2-square
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ Guidelines for new compatibles for SoC blocks/components.
+ When adding new compatibles in new bindings, use the format::
+ samsung,SoC-IP
+
+ For example::
+ samsung,exynos5433-cmu-isp
+
+select:
+ properties:
+ compatible:
+ pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - description: Preferred naming style for compatibles of SoC components
+ pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+ # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+ - enum:
+ - samsung,exynos4x12-pinctrl
+ - samsung,exynos4x12-usb2-phy
+ - samsung,s3c64xx-pinctrl
+ - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
- prt,prtt1s # Protonic PRTT1S
- const: st,stm32mp151
- - description: DH STM32MP153 SoM based Boards
+ - description: DH STM32MP153 DHCOM SoM based Boards
items:
- const: dh,stm32mp153c-dhcom-drc02
- const: dh,stm32mp153c-dhcom-som
- const: st,stm32mp153
+ - description: DH STM32MP153 DHCOR SoM based Boards
+ items:
+ - const: dh,stm32mp153c-dhcor-drc-compact
+ - const: dh,stm32mp153c-dhcor-som
+ - const: st,stm32mp153
+
- items:
- enum:
- shiratech,stm32mp157a-iot-box # IoT Box
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+ - qinjian <qinjian@cqplus1.com>
+
+description: |
+ ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+ Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ items:
+ - enum:
+ - sunplus,sp7021-achip
+ - sunplus,sp7021-demo-v3
+ - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
- const: yones-toptech,bs1078-v2
- const: allwinner,sun6i-a31s
+ - description: X96 Mate TV box
+ items:
+ - const: hechuang,x96-mate
+ - const: allwinner,sun50i-h616
+
- description: Xunlong OrangePi
items:
- const: xunlong,orangepi
- const: xunlong,orangepi-zero-plus2-h3
- const: allwinner,sun8i-h3
+ - description: Xunlong OrangePi Zero 2
+ items:
+ - const: xunlong,orangepi-zero2
+ - const: allwinner,sun50i-h616
+
additionalProperties: true
compatible:
enum:
- allwinner,sun5i-a13-mbus
+ - allwinner,sun8i-a33-mbus
+ - allwinner,sun8i-a50-mbus
+ - allwinner,sun8i-a83t-mbus
- allwinner,sun8i-h3-mbus
- allwinner,sun8i-r40-mbus
+ - allwinner,sun8i-v3s-mbus
+ - allwinner,sun8i-v536-mbus
+ - allwinner,sun20i-d1-mbus
- allwinner,sun50i-a64-mbus
+ - allwinner,sun50i-a100-mbus
- allwinner,sun50i-h5-mbus
+ - allwinner,sun50i-h6-mbus
+ - allwinner,sun50i-h616-mbus
+ - allwinner,sun50i-r329-mbus
reg:
minItems: 1
- dma-ranges
if:
- properties:
- compatible:
- contains:
- enum:
- - allwinner,sun8i-h3-mbus
- - allwinner,sun50i-a64-mbus
- - allwinner,sun50i-h5-mbus
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun5i-a13-mbus
+ - allwinner,sun8i-r40-mbus
then:
properties:
- compatible
- reg
- nvidia,bpmp
- - status
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+ - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^axi2apb@([0-9a-f]+)$"
+
+ compatible:
+ enum:
+ - nvidia,tegra194-axi2apb
+
+ reg:
+ maxItems: 6
+ description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ axi2apb: axi2apb@2390000 {
+ compatible = "nvidia,tegra194-axi2apb";
+ reg = <0x02390000 0x1000>,
+ <0x023a0000 0x1000>,
+ <0x023b0000 0x1000>,
+ <0x023c0000 0x1000>,
+ <0x023d0000 0x1000>,
+ <0x023e0000 0x1000>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 CBB 1.0 bindings
+
+maintainers:
+ - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+ The Control Backbone (CBB) is comprised of the physical path from an
+ initiator to a target's register configuration space. CBB 1.0 has
+ multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+ initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+ This driver handles errors due to illegal register accesses reported
+ by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+ "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+ which is the main NOC.
+
+ By default, the access issuing initiator is informed about the error
+ using SError or Data Abort exception unless the ERD (Error Response
+ Disable) is enabled/set for that initiator. If the ERD is enabled, then
+ SError or Data Abort is masked and the error is reported with interrupt.
+
+ - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+ errors due to illegal accesses from CCPLEX are reported by interrupts.
+ If ERD is not set, then error is reported by SError.
+ - For other initiators, the ERD is disabled. So, the access issuing
+ initiator is informed about the illegal access by Data Abort exception.
+ In addition, an interrupt is also generated to CCPLEX. These initiators
+ include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+ engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+ engine) etc which can initiate transactions.
+
+ The driver prints relevant debug information like Error Code, Error
+ Description, Master, Address, AXI ID, Cache, Protection, Security Group
+ etc on receiving error notification.
+
+properties:
+ $nodename:
+ pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra194-cbb-noc
+ - nvidia,tegra194-aon-noc
+ - nvidia,tegra194-bpmp-noc
+ - nvidia,tegra194-rce-noc
+ - nvidia,tegra194-sce-noc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ CCPLEX receives secure or nonsecure interrupt depending on error type.
+ A secure interrupt is received for SEC(firewall) & SLV errors and a
+ non-secure interrupt is received for TMO & DEC errors.
+ items:
+ - description: non-secure interrupt
+ - description: secure interrupt
+
+ nvidia,axi2apb:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description:
+ Specifies the node having all axi2apb bridges which need to be checked
+ for any error logged in their status register.
+
+ nvidia,apbmisc:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description:
+ Specifies the apbmisc node which need to be used for reading the ERD
+ register.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - nvidia,apbmisc
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cbb-noc@2300000 {
+ compatible = "nvidia,tegra194-cbb-noc";
+ reg = <0x02300000 0x1000>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra CBB 2.0 bindings
+
+maintainers:
+ - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+ The Control Backbone (CBB) is comprised of the physical path from an
+ initiator to a target's register configuration space. CBB 2.0 consists
+ of multiple sub-blocks connected to each other to create a topology.
+ The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+ which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+ "CBB central fabric".
+
+ In CBB 2.0, each initiator which can issue transactions connects to a
+ Root Master Node (MN) before it connects to any other element of the
+ fabric. Each Root MN contains a Error Monitor (EM) which detects and
+ logs error. Interrupts from various EM blocks are collated by Error
+ Notifier (EN) which is per fabric and presents a single interrupt from
+ fabric to the SoC interrupt controller.
+
+ The driver handles errors from CBB due to illegal register accesses
+ and prints debug information about failed transaction on receiving
+ the interrupt from EN. Debug information includes Error Code, Error
+ Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+ Security Group etc on receiving error notification.
+
+ If the Error Response Disable (ERD) is set/enabled for an initiator,
+ then SError or Data abort exception error response is masked and an
+ interrupt is used for reporting errors due to illegal accesses from
+ that initiator. The value returned on read failures is '0xFFFFFFFF'
+ for compatibility with PCIE.
+
+properties:
+ $nodename:
+ pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra234-aon-fabric
+ - nvidia,tegra234-bpmp-fabric
+ - nvidia,tegra234-cbb-fabric
+ - nvidia,tegra234-dce-fabric
+ - nvidia,tegra234-rce-fabric
+ - nvidia,tegra234-sce-fabric
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cbb-fabric@1300000 {
+ compatible = "nvidia,tegra234-cbb-fabric";
+ reg = <0x13a00000 0x400000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ };
- items:
- const: allwinner,sun8i-r40-de2-clk
- const: allwinner,sun8i-h3-de2-clk
+ - items:
+ - const: allwinner,sun20i-d1-de2-clk
+ - const: allwinner,sun50i-h5-de2-clk
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+
+maintainers:
+ - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ This binding uses the common clock binding.
+ (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See the full list of clock IDs from
+ include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8dxl-clk
+ - fsl,imx8qm-clk
+ - fsl,imx8qxp-clk
+ - const: fsl,scu-clk
+
+ '#clock-cells':
+ const: 2
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller {
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+ #clock-cells = <2>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller Binding
+
+maintainers:
+ - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+ Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+ generates and supplies clocks to all modules within the BMC.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm845-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description:
+ See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+ list of NPCM8XX clock IDs.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ ahb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@f0801000 {
+ compatible = "nuvoton,npcm845-clk";
+ reg = <0x0 0xf0801000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+...
$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
maintainers:
- Jonathan Marek <jonathan@marek.ca>
description: |
Qualcomm display clock control module which supports the clocks, resets and
- power domains on SM8150 and SM8250.
+ power domains on SM8150/SM8250/SM8350.
See also:
dt-bindings/clock/qcom,dispcc-sm8150.h
dt-bindings/clock/qcom,dispcc-sm8250.h
+ dt-bindings/clock/qcom,dispcc-sm8350.h
properties:
compatible:
- qcom,sc8180x-dispcc
- qcom,sm8150-dispcc
- qcom,sm8250-dispcc
+ - qcom,sm8350-dispcc
clocks:
items:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description: |
+ Qualcomm graphics clock control module which supports the clocks, resets and
+ power domains on Qualcomm SoCs.
+
+ See also:
+ dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8350-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source
+ - description: GPLL0 div branch source
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@3d90000 {
+ compatible = "qcom,sm8350-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SM8450
+
+maintainers:
+ - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+ Qualcomm camera clock control module which supports the clocks, resets and
+ power domains on SM8450.
+
+ See also include/dt-bindings/clock/qcom,sm8450-camcc.h
+
+properties:
+ compatible:
+ const: qcom,sm8450-camcc
+
+ clocks:
+ items:
+ - description: Camera AHB clock from GCC
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Sleep clock source
+
+ power-domains:
+ maxItems: 1
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - required-opps
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ clock-controller@ade0000 {
+ compatible = "qcom,sm8450-camcc";
+ reg = <0xade0000 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
enum:
- samsung,exynos7885-cmu-top
- samsung,exynos7885-cmu-core
+ - samsung,exynos7885-cmu-fsys
- samsung,exynos7885-cmu-peri
clocks:
- const: dout_core_cci
- const: dout_core_g3d
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos7885-cmu-fsys
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_FSYS bus clock (from CMU_TOP)
+ - description: MMC_CARD clock (from CMU_TOP)
+ - description: MMC_EMBD clock (from CMU_TOP)
+ - description: MMC_SDIO clock (from CMU_TOP)
+ - description: USB30DRD clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_fsys_bus
+ - const: dout_fsys_mmc_card
+ - const: dout_fsys_mmc_embd
+ - const: dout_fsys_mmc_sdio
+ - const: dout_fsys_usb30drd
+
- if:
properties:
compatible:
contains:
enum:
- st,stm32mp1-rcc-secure
+ - st,stm32mp13-rcc
then:
properties:
clocks:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ const: sunplus,sp7021-clkc
+
+ reg:
+ maxItems: 3
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ extclk: osc0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "extclk";
+ };
+
+ clkc: clock-controller@9c000004 {
+ compatible = "sunplus,sp7021-clkc";
+ reg = <0x9c000004 0x28>,
+ <0x9c000200 0x44>,
+ <0x9c000268 0x08>;
+ clocks = <&extclk>;
+ #clock-cells = <1>;
+ };
+
+...
examples:
- |
/ {
- model = "Qualcomm Technologies, Inc. QCS404";
- compatible = "qcom,qcs404";
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+ compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
#address-cells = <2>;
#size-cells = <2>;
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/mediatek/mediatek,mutex.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek mutex
-
-maintainers:
- - Chun-Kuang Hu <chunkuang.hu@kernel.org>
- - Philipp Zabel <p.zabel@pengutronix.de>
-
-description: |
- Mediatek mutex, namely MUTEX, is used to send the triggers signals called
- Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
- data path or MDP data path.
- In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
- the shadow register.
- MUTEX device node must be siblings to the central MMSYS_CONFIG node.
- For a description of the MMSYS_CONFIG binding, see
- Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
- for details.
-
-properties:
- compatible:
- enum:
- - mediatek,mt2701-disp-mutex
- - mediatek,mt2712-disp-mutex
- - mediatek,mt8167-disp-mutex
- - mediatek,mt8173-disp-mutex
- - mediatek,mt8183-disp-mutex
- - mediatek,mt8186-disp-mutex
- - mediatek,mt8192-disp-mutex
- - mediatek,mt8195-disp-mutex
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
- power-domains:
- description: A phandle and PM domain specifier as defined by bindings of
- the power controller specified by phandle. See
- Documentation/devicetree/bindings/power/power-domain.yaml for details.
-
- clocks:
- items:
- - description: MUTEX Clock
-
- mediatek,gce-events:
- description:
- The event id which is mapping to the specific hardware event signal
- to gce. The event id is defined in the gce header
- include/dt-bindings/gce/<chip>-gce.h of each chips.
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
-required:
- - compatible
- - reg
- - interrupts
- - power-domains
- - clocks
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt8173-clk.h>
- #include <dt-bindings/power/mt8173-power.h>
- #include <dt-bindings/gce/mt8173-gce.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- mutex: mutex@14020000 {
- compatible = "mediatek,mt8173-disp-mutex";
- reg = <0 0x14020000 0 0x1000>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
- clocks = <&mmsys CLK_MM_MUTEX_32K>;
- mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
- <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
- };
- };
enable-gpios: true
port: true
+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- enable-gpios
panel-height-mm:
description: physical panel height [mm]
+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- reg
backlight: true
port: true
+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- reg
backlight: true
port: true
+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- port
required:
- reg
+ protocol@18:
+ type: object
+ properties:
+ reg:
+ const: 0x18
+
additionalProperties: false
patternProperties:
};
};
};
+
+ scmi_powercap: protocol@18 {
+ reg = <0x18>;
+ };
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+ The System Controller Firmware (SCFW) is a low-level system function
+ which runs on a dedicated Cortex-M core to provide power, clock, and
+ resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+ (QM, QP), and i.MX8QX (QXP, DX).
+ The AP communicates with the SC using a multi-ported MU module found
+ in the LSIO subsystem. The current definition of this MU module provides
+ 5 remote AP connections to the SC to support up to 5 execution environments
+ (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+ with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+ using the MSI bus.
+
+properties:
+ compatible:
+ const: fsl,imx-scu
+
+ clock-controller:
+ description:
+ Clock controller node that provides the clocks controlled by the SCU
+ $ref: /schemas/clock/fsl,scu-clk.yaml
+
+ ocotp:
+ description:
+ OCOTP controller node provided by the SCU
+ $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+ keys:
+ description:
+ Keys provided by the SCU
+ $ref: /schemas/input/fsl,scu-key.yaml
+
+ mboxes:
+ description:
+ A list of phandles of TX MU channels followed by a list of phandles of
+ RX MU channels. The list may include at the end one more optional MU
+ channel for general interrupt. The number of expected tx and rx
+ channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+ compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+ within the same MU instance. Cross instances are not allowed. The MU
+ instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+ need to ensure that one is used that does not conflict with other
+ execution environments such as ATF.
+ oneOf:
+ - items:
+ - description: TX0 MU channel
+ - description: RX0 MU channel
+ - items:
+ - description: TX0 MU channel
+ - description: RX0 MU channel
+ - description: optional MU channel for general interrupt
+ - items:
+ - description: TX0 MU channel
+ - description: TX1 MU channel
+ - description: TX2 MU channel
+ - description: TX3 MU channel
+ - description: RX0 MU channel
+ - description: RX1 MU channel
+ - description: RX2 MU channel
+ - description: RX3 MU channel
+ - items:
+ - description: TX0 MU channel
+ - description: TX1 MU channel
+ - description: TX2 MU channel
+ - description: TX3 MU channel
+ - description: RX0 MU channel
+ - description: RX1 MU channel
+ - description: RX2 MU channel
+ - description: RX3 MU channel
+ - description: optional MU channel for general interrupt
+
+ mbox-names:
+ oneOf:
+ - items:
+ - const: tx0
+ - const: rx0
+ - items:
+ - const: tx0
+ - const: rx0
+ - const: gip3
+ - items:
+ - const: tx0
+ - const: tx1
+ - const: tx2
+ - const: tx3
+ - const: rx0
+ - const: rx1
+ - const: rx2
+ - const: rx3
+ - items:
+ - const: tx0
+ - const: tx1
+ - const: tx2
+ - const: tx3
+ - const: rx0
+ - const: rx1
+ - const: rx2
+ - const: rx3
+ - const: gip3
+
+ pinctrl:
+ description:
+ Pin controller provided by the SCU
+ $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+ power-controller:
+ description:
+ Power domains controller node that provides the power domains
+ controlled by the SCU
+ $ref: /schemas/power/fsl,scu-pd.yaml
+
+ rtc:
+ description:
+ RTC controller provided by the SCU
+ $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+ thermal-sensor:
+ description:
+ Thermal sensor provided by the SCU
+ $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+ watchdog:
+ description:
+ Watchdog controller provided by the SCU
+ $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+ - compatible
+ - mbox-names
+ - mboxes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+ firmware {
+ system-controller {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
+ mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+ &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
+
+ clock-controller {
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+ #clock-cells = <2>;
+ };
+
+ pinctrl {
+ compatible = "fsl,imx8qxp-iomuxc";
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
+ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+ };
+
+ ocotp {
+ compatible = "fsl,imx8qxp-scu-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fec_mac0: mac@2c4 {
+ reg = <0x2c4 6>;
+ };
+ };
+
+ power-controller {
+ compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+ #power-domain-cells = <1>;
+ };
+
+ rtc {
+ compatible = "fsl,imx8qxp-sc-rtc";
+ };
+
+ keys {
+ compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+ linux,keycodes = <KEY_POWER>;
+ };
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
+
+ thermal-sensor {
+ compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+ };
* "qcom,scm-msm8994"
* "qcom,scm-msm8996"
* "qcom,scm-msm8998"
+ * "qcom,scm-qcs404"
* "qcom,scm-sc7180"
* "qcom,scm-sc7280"
+ * "qcom,scm-sm6125"
* "qcom,scm-sdm845"
* "qcom,scm-sdx55"
+ * "qcom,scm-sdx65"
* "qcom,scm-sm6350"
* "qcom,scm-sm8150"
* "qcom,scm-sm8250"
clock and "bus" for the bus clock per the requirements of the compatible.
- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
download mode control register (optional)
+- interconnects: Specifies the bandwidth requirements of the SCM interface (optional)
Example for MSM8916:
properties:
compatible:
- const: xlnx,zynq-gpio-1.0
+ enum:
+ - xlnx,zynq-gpio-1.0
+ - xlnx,zynqmp-gpio-1.0
+ - xlnx,versal-gpio-1.0
+ - xlnx,pmc-gpio-1.0
reg:
maxItems: 1
gpio-controller: true
+ gpio-line-names:
+ description: strings describing the names of each gpio line
+ minItems: 58
+ maxItems: 174
+
interrupt-controller: true
"#interrupt-cells":
clocks:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-gpio-1.0
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 174
+ maxItems: 174
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - xlnx,zynq-gpio-1.0
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 118
+ maxItems: 118
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - xlnx,versal-gpio-1.0
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 58
+ maxItems: 58
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - xlnx,pmc-gpio-1.0
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 116
+ maxItems: 116
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Product Register
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+ Most Renesas ARM SoCs have a Product Register or Boundary Scan ID
+ Register that allows to retrieve SoC product and revision information.
+ If present, a device node for this register should be added.
+
+properties:
+ compatible:
+ enum:
+ - renesas,prr
+ - renesas,bsid
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0xff000044 4>;
+ };
- adi,adm1032
- adi,adt7461
- adi,adt7461a
+ - adi,adt7481
- dallas,max6646
- dallas,max6647
- dallas,max6649
"#thermal-sensor-cells":
const: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
vcc-supply:
description: phandle to the regulator that provides the +VCC supply
- compatible
- reg
+patternProperties:
+ "^channel@([0-2])$":
+ type: object
+ description: Represents channels of the device and their specific configuration.
+
+ properties:
+ reg:
+ description: The channel number. 0 is local channel, 1-2 are remote channels.
+ items:
+ minimum: 0
+ maximum: 2
+
+ label:
+ description: A descriptive name for this channel, like "ambient" or "psu".
+
+ temperature-offset-millicelsius:
+ description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
allOf:
- if:
not:
enum:
- adi,adt7461
- adi,adt7461a
+ - adi,adt7481
- ti,tmp451
- ti,tmp461
then:
properties:
ti,extended-range-enable: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - dallas,max6646
+ - dallas,max6647
+ - dallas,max6649
+ - dallas,max6657
+ - dallas,max6658
+ - dallas,max6659
+ - dallas,max6695
+ - dallas,max6696
+ then:
+ patternProperties:
+ "^channel@([0-2])$":
+ properties:
+ temperature-offset-millicelsius: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adt7461
+ - adi,adt7461a
+ - adi,adt7481
+ - onnn,nct1008
+ then:
+ patternProperties:
+ "^channel@([0-2])$":
+ properties:
+ temperature-offset-millicelsius:
+ maximum: 127750
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adm1032
+ - dallas,max6680
+ - dallas,max6681
+ - gmt,g781
+ - national,lm86
+ - national,lm89
+ - national,lm90
+ - national,lm99
+ - nxp,sa56004
+ - winbond,w83l771
+ then:
+ patternProperties:
+ "^channel@([0-2])$":
+ properties:
+ temperature-offset-millicelsius:
+ maximum: 127875
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tmp451
+ - ti,tmp461
+ then:
+ patternProperties:
+ "^channel@([0-2])$":
+ properties:
+ temperature-offset-millicelsius:
+ maximum: 127937
+
additionalProperties: false
examples:
#thermal-sensor-cells = <1>;
};
};
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@4c {
+ compatible = "adi,adt7481";
+ reg = <0x4c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "local";
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "front";
+ temperature-offset-millicelsius = <4000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "back";
+ temperature-offset-millicelsius = <750>;
+ };
+ };
+ };
- enum:
- allwinner,sun8i-a23-i2c
- allwinner,sun8i-a83t-i2c
+ - allwinner,sun8i-v536-i2c
- allwinner,sun50i-a64-i2c
- - allwinner,sun50i-a100-i2c
- allwinner,sun50i-h6-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - description: Allwinner SoCs with offload support
+ items:
+ - enum:
+ - allwinner,sun20i-d1-i2c
+ - allwinner,sun50i-a100-i2c
- allwinner,sun50i-h616-i2c
+ - allwinner,sun50i-r329-i2c
+ - const: allwinner,sun8i-v536-i2c
- const: allwinner,sun6i-a31-i2c
- const: marvell,mv64xxx-i2c
- const: marvell,mv78230-i2c
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8qxp-sc-key
+ - const: fsl,imx-sc-key
+
+ linux,keycodes:
+ maxItems: 1
+
+required:
+ - compatible
+ - linux,keycodes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+
+ keys {
+ compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+ linux,keycodes = <KEY_POWER>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ Bandwidth Monitor measures current throughput on buses between various NoC
+ fabrics and provides information when it crosses configured thresholds.
+
+ Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+ - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+ called just BWMON,
+ - Measuring the bandwidth between Last Level Cache Controller and memory
+ (DDR) - called LLCC BWMON.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,sdm845-bwmon
+ - const: qcom,msm8998-bwmon
+ - const: qcom,msm8998-bwmon # BWMON v4
+
+ interconnects:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table: true
+
+ reg:
+ # BWMON v4 (currently described) and BWMON v5 use one register address
+ # space. BWMON v2 uses two register spaces - not yet described.
+ maxItems: 1
+
+required:
+ - compatible
+ - interconnects
+ - interrupts
+ - operating-points-v2
+ - opp-table
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pmu@1436400 {
+ compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
+ reg = <0x01436400 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-0 {
+ opp-peak-kBps = <4800000>;
+ };
+ opp-1 {
+ opp-peak-kBps = <9216000>;
+ };
+ opp-2 {
+ opp-peak-kBps = <15052800>;
+ };
+ opp-3 {
+ opp-peak-kBps = <20889600>;
+ };
+ opp-4 {
+ opp-peak-kBps = <25497600>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ IA55 performs various interrupt controls including synchronization for the external
+ interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+ interrupts output by each IP. And it notifies the interrupt to the GIC
+ - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+ - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+ - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+ stand-up edge detection interrupts)
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-irqc # RZ/G2{L,LC}
+ - renesas,r9a07g054-irqc # RZ/V2L
+ - const: renesas,rzg2l-irqc
+
+ '#interrupt-cells':
+ description: The first cell should contain external interrupt number (IRQ0-7) and the
+ second cell is used to specify the flag.
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 41
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: clk
+ - const: pclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ irqc: interrupt-controller@110a0000 {
+ compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+ reg = <0x110a0000 0x10000>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+ <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_IA55_RESETN>;
+ };
with priority below this threshold will not cause the PLIC to raise its
interrupt line leading to the context.
- While the PLIC supports both edge-triggered and level-triggered interrupts,
- interrupt handlers are oblivious to this distinction and therefore it is not
- specified in the PLIC device-tree binding.
+ The PLIC supports both edge-triggered and level-triggered interrupts. For
+ edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+ seen while an interrupt handler is active; the PLIC may either queue them or
+ ignore them. In the first case, handlers are oblivious to the trigger type, so
+ it is not included in the interrupt specifier. In the second case, software
+ needs to know the trigger type, so it can reorder the interrupt flow to avoid
+ missing interrupts. This special handling is needed by at least the Renesas
+ RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
properties:
compatible:
oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g043-plic
+ - const: andestech,nceplic100
- items:
- enum:
- sifive,fu540-c000-plic
'#address-cells':
const: 0
- '#interrupt-cells':
- const: 1
+ '#interrupt-cells': true
interrupt-controller: true
description:
Specifies how many external interrupts are supported by this controller.
+ clocks: true
+
+ power-domains: true
+
+ resets: true
+
required:
- compatible
- '#address-cells'
- interrupts-extended
- riscv,ndev
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - andestech,nceplic100
+ - thead,c900-plic
+
+ then:
+ properties:
+ '#interrupt-cells':
+ const: 2
+
+ else:
+ properties:
+ '#interrupt-cells':
+ const: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a07g043-plic
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+ - power-domains
+ - resets
+
additionalProperties: false
examples:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ items:
+ - const: sunplus,sp7021-intc
+
+ reg:
+ maxItems: 2
+ description:
+ Specifies base physical address(s) and size of the controller regs.
+ The 1st region include type/polarity/priority/mask regs.
+ The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the trigger
+ type as defined in interrupt.txt in this directory.
+
+ interrupts:
+ maxItems: 2
+ description:
+ EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+ controller.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ intc: interrupt-controller@9c000780 {
+ compatible = "sunplus,sp7021-intc";
+ reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+ };
+
+...
- mediatek,mt2701-smi-common
- mediatek,mt2712-smi-common
- mediatek,mt6779-smi-common
+ - mediatek,mt6795-smi-common
- mediatek,mt8167-smi-common
- mediatek,mt8173-smi-common
- mediatek,mt8183-smi-common
- mediatek,mt2701-smi-larb
- mediatek,mt2712-smi-larb
- mediatek,mt6779-smi-larb
+ - mediatek,mt6795-smi-larb
- mediatek,mt8167-smi-larb
- mediatek,mt8173-smi-larb
- mediatek,mt8183-smi-larb
- enum:
- allwinner,sun20i-d1-emac
- allwinner,sun50i-h6-emac
+ - allwinner,sun50i-h616-emac0
- const: allwinner,sun50i-a64-emac
reg:
- in-band-status
fixed-link:
- allOf:
- - if:
- type: array
- then:
- deprecated: true
- items:
- - minimum: 0
- maximum: 31
- description:
- Emulated PHY ID, choose any but unique to the all
- specified fixed-links
-
- - enum: [0, 1]
- description:
- Duplex configuration. 0 for half duplex or 1 for
- full duplex
-
- - enum: [10, 100, 1000, 2500, 10000]
- description:
- Link speed in Mbits/sec.
-
- - enum: [0, 1]
- description:
- Pause configuration. 0 for no pause, 1 for pause
-
- - enum: [0, 1]
- description:
- Asymmetric pause configuration. 0 for no asymmetric
- pause, 1 for asymmetric pause
-
-
- - if:
- type: object
- then:
- properties:
- speed:
- description:
- Link speed.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [10, 100, 1000, 2500, 10000]
-
- full-duplex:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Indicates that full-duplex is used. When absent, half
- duplex is assumed.
-
- pause:
- $ref: /schemas/types.yaml#definitions/flag
- description:
- Indicates that pause should be enabled.
-
- asym-pause:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Indicates that asym_pause should be enabled.
-
- link-gpios:
- maxItems: 1
- description:
- GPIO to determine if the link is up
-
- required:
- - speed
+ oneOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
+ items:
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000, 2500, 10000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
+ - type: object
+ additionalProperties: false
+ properties:
+ speed:
+ description:
+ Link speed.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [10, 100, 1000, 2500, 10000]
+
+ full-duplex:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that full-duplex is used. When absent, half
+ duplex is assumed.
+
+ pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that pause should be enabled.
+
+ asym-pause:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that asym_pause should be enabled.
+
+ link-gpios:
+ maxItems: 1
+ description:
+ GPIO to determine if the link is up
+
+ required:
+ - speed
additionalProperties: true
Should specify the gpio for phy reset.
phy-reset-duration:
+ $ref: /schemas/types.yaml#/definitions/uint32
deprecated: true
description:
Reset duration in milliseconds. Should present only if property
and 1 millisecond will be used instead.
phy-reset-active-high:
+ type: boolean
deprecated: true
description:
If present then the reset sequence using the GPIO specified in the
"phy-reset-gpios" property is reversed (H=reset state, L=operation state).
phy-reset-post-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
deprecated: true
description:
Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+ - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+ This MII converter is present on the Renesas RZ/N1 SoC family. It is
+ responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-miic
+ - const: renesas,rzn1-miic
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: MII reference clock
+ - description: RGMII reference clock
+ - description: RMII reference clock
+ - description: AHB clock used for the MII converter register interface
+
+ clock-names:
+ items:
+ - const: mii_ref
+ - const: rgmii_ref
+ - const: rmii_ref
+ - const: hclk
+
+ renesas,miic-switch-portin:
+ description: MII Switch PORTIN configuration. This value should use one of
+ the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^mii-conv@[0-5]$":
+ type: object
+ description: MII converter port
+
+ properties:
+ reg:
+ description: MII Converter port number.
+ enum: [1, 2, 3, 4, 5]
+
+ renesas,miic-input:
+ description: Converter input port configuration. This value should use
+ one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - reg
+ - renesas,miic-input
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ reg:
+ const: 1
+ then:
+ properties:
+ renesas,miic-input:
+ const: 0
+ - if:
+ properties:
+ reg:
+ const: 2
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [1, 11]
+ - if:
+ properties:
+ reg:
+ const: 3
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [7, 10]
+ - if:
+ properties:
+ reg:
+ const: 4
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [4, 6, 9, 13]
+ - if:
+ properties:
+ reg:
+ const: 5
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [3, 5, 8, 12]
+
+required:
+ - '#address-cells'
+ - '#size-cells'
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/net/pcs-rzn1-miic.h>
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+ eth-miic@44030000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+ reg = <0x44030000 0x10000>;
+ clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+ <&sysctrl R9A06G032_CLK_RGMII_REF>,
+ <&sysctrl R9A06G032_CLK_RMII_REF>,
+ <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+ clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+ renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+ power-domains = <&sysctrl>;
+
+ mii_conv1: mii-conv@1 {
+ renesas,miic-input = <MIIC_GMAC1_PORT>;
+ reg = <1>;
+ };
+
+ mii_conv2: mii-conv@2 {
+ renesas,miic-input = <MIIC_SWITCH_PORTD>;
+ reg = <2>;
+ };
+
+ mii_conv3: mii-conv@3 {
+ renesas,miic-input = <MIIC_SWITCH_PORTC>;
+ reg = <3>;
+ };
+
+ mii_conv4: mii-conv@4 {
+ renesas,miic-input = <MIIC_SWITCH_PORTB>;
+ reg = <4>;
+ };
+
+ mii_conv5: mii-conv@5 {
+ renesas,miic-input = <MIIC_SWITCH_PORTA>;
+ reg = <5>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: nvmem.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-scu-ocotp
+ - fsl,imx8qxp-scu-ocotp
+
+patternProperties:
+ '^mac@[0-9a-f]*$':
+ type: object
+ description:
+ MAC address.
+
+ properties:
+ reg:
+ description:
+ Byte offset within OCOTP where the MAC address is stored
+ maxItems: 1
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ocotp {
+ compatible = "fsl,imx8qxp-scu-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fec_mac0: mac@2c4 {
+ reg = <0x2c4 6>;
+ };
+ };
additionalProperties: false
- "^vcc-p[a-hlm]-supply$":
+ "^vcc-p[a-ilm]-supply$":
description:
Power supplies for pin banks.
required:
- "#gpio-cells"
- - "#interrupt-cells"
- compatible
- reg
- - interrupts
- clocks
- clock-names
- gpio-controller
- - interrupt-controller
allOf:
# FIXME: We should have the pin bank supplies here, but not a lot of
# warnings.
- $ref: "pinctrl.yaml#"
+ - if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-r-pinctrl
+
+ then:
+ required:
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+
- if:
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ This binding uses the i.MX common pinctrl binding.
+ (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-iomuxc
+ - fsl,imx8qxp-iomuxc
+ - fsl,imx8dxl-iomuxc
+
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 3 integers and represents the pin ID, the mux value
+ and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+ specified using a PIN_FUNC_ID macro, which can be found in
+ <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+ the pad setting value like pull-up on this pin. Please refer to the
+ appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "pin_id" indicates the pin ID
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "fsl,imx8qxp-iomuxc";
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ 111 0 0x06000020
+ 112 0 0x06000020
+ >;
+ };
+ };
gpio-ranges:
maxItems: 1
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+ second cell is used to specify the flag.
+ E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+ being used as an interrupt.
+
clocks:
maxItems: 1
- gpio-controller
- '#gpio-cells'
- gpio-ranges
+ - interrupt-controller
+ - '#interrupt-cells'
- clocks
- power-domains
- resets
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 392>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
resets = <&cpg R9A07G044_GPIO_RSTN>,
<&cpg R9A07G044_GPIO_PORT_RESETN>,
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ Power domain bindings based on SCU Message Protocol
+
+allOf:
+ - $ref: power-domain.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8qm-scu-pd
+ - fsl,imx8qxp-scu-pd
+ - const: fsl,scu-pd
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ power-controller {
+ compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+ #power-domain-cells = <1>;
+ };
compatible:
enum:
+ - mediatek,mt6795-power-controller
- mediatek,mt8167-power-controller
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
reg:
description: |
Power domain index. Valid values are defined in:
+ "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
enum:
- qcom,mdm9607-rpmpd
- qcom,msm8226-rpmpd
+ - qcom,msm8909-rpmpd
- qcom,msm8916-rpmpd
- qcom,msm8939-rpmpd
- qcom,msm8953-rpmpd
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock based PWM controller
+
+maintainers:
+ - Nikita Travkin <nikita@trvn.ru>
+
+description: |
+ Some systems have clocks that can be exposed to external devices.
+ (e.g. by muxing them to GPIO pins)
+ It's often possible to control duty-cycle of such clocks which makes them
+ suitable for generating PWM signal.
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ const: clk-pwm
+
+ clocks:
+ description: Clock used to generate the signal.
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 2
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - clocks
+
+examples:
+ - |
+ pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+ clocks = <&gcc 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_clk_flash_default>;
+ };
- "mediatek,mt7628-pwm": found on mt7628 SoC.
- "mediatek,mt7629-pwm": found on mt7629 SoC.
- "mediatek,mt8183-pwm": found on mt8183 SoC.
+ - "mediatek,mt8195-pwm", "mediatek,mt8183-pwm": found on mt8195 SoC.
+ - "mediatek,mt8365-pwm": found on mt8365 SoC.
- "mediatek,mt8516-pwm": found on mt8516 SoC.
- reg: physical base address and length of the controller's registers.
- #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
has no clocks
- "top": the top clock generator
- "main": clock used by the PWM core
+ - "pwm1-3": the three per PWM clocks for mt8365
- "pwm1-8": the eight per PWM clocks for mt2712
- "pwm1-6": the six per PWM clocks for mt7622
- "pwm1-5": the five per PWM clocks for mt7623
compatible:
enum:
- mps,mp5416
+ - mps,mp5496
reg:
maxItems: 1
+++ /dev/null
-Bindings for the Generic PWM Regulator
-======================================
-
-Currently supports 2 modes of operation:
-
-Voltage Table: When in this mode, a voltage table (See below) of
- predefined voltage <=> duty-cycle values must be
- provided via DT. Limitations are that the regulator can
- only operate at the voltages supplied in the table.
- Intermediary duty-cycle values which would normally
- allow finer grained voltage selection are ignored and
- rendered useless. Although more control is given to
- the user if the assumptions made in continuous-voltage
- mode do not reign true.
-
-Continuous Voltage: This mode uses the regulator's maximum and minimum
- supplied voltages specified in the
- regulator-{min,max}-microvolt properties to calculate
- appropriate duty-cycle values. This allows for a much
- more fine grained solution when compared with
- voltage-table mode above. This solution does make an
- assumption that a %50 duty-cycle value will cause the
- regulator voltage to run at half way between the
- supplied max_uV and min_uV values.
-
-Required properties:
---------------------
-- compatible: Should be "pwm-regulator"
-
-- pwms: PWM specification (See: ../pwm/pwm.txt)
-
-Only required for Voltage Table Mode:
-- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells
- First cell is voltage in microvolts (uV)
- Second cell is duty-cycle in percent (%)
-
-Optional properties for Continuous mode:
-- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not
- defined, <100> is assumed, meaning that
- pwm-dutycycle-range contains values expressed in
- percent.
-
-- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding
- the dutycycle for regulator-min-microvolt and the
- second one the dutycycle for regulator-max-microvolt.
- Duty cycle values are expressed in pwm-dutycycle-unit.
- If not defined, <0 100> is assumed.
-
-NB: To be clear, if voltage-table is provided, then the device will be used
-in Voltage Table Mode. If no voltage-table is provided, then the device will
-be used in Continuous Voltage Mode.
-
-Optional properties:
---------------------
-- enable-gpios: GPIO to use to enable/disable the regulator
-
-Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
-
-Continuous Voltage With Enable GPIO Example:
- pwm_regulator {
- compatible = "pwm-regulator";
- pwms = <&pwm1 0 8448 0>;
- enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
- /* unit == per-mille */
- pwm-dutycycle-unit = <1000>;
- /*
- * Inverted PWM logic, and the duty cycle range is limited
- * to 30%-70%.
- */
- pwm-dutycycle-range = <700 300>; /* */
- };
-
-Voltage Table Example:
- pwm_regulator {
- compatible = "pwm-regulator";
- pwms = <&pwm1 0 8448 0>;
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
-
- /* Voltage Duty-Cycle */
- voltage-table = <1114000 0>,
- <1095000 10>,
- <1076000 20>,
- <1056000 30>,
- <1036000 40>,
- <1016000 50>;
- };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for the Generic PWM Regulator
+
+maintainers:
+ - Brian Norris <briannorris@chromium.org>
+ - Lee Jones <lee@kernel.org>
+ - Alexandre Courbot <acourbot@nvidia.com>
+
+description: |
+ Currently supports 2 modes of operation:
+
+ Voltage Table:
+ When in this mode, a voltage table (See below) of predefined voltage <=>
+ duty-cycle values must be provided via DT. Limitations are that the
+ regulator can only operate at the voltages supplied in the table.
+ Intermediary duty-cycle values which would normally allow finer grained
+ voltage selection are ignored and rendered useless. Although more control
+ is given to the user if the assumptions made in continuous-voltage mode do
+ not reign true.
+
+ Continuous Voltage:
+ This mode uses the regulator's maximum and minimum supplied voltages
+ specified in the regulator-{min,max}-microvolt properties to calculate
+ appropriate duty-cycle values. This allows for a much more fine grained
+ solution when compared with voltage-table mode above. This solution does
+ make an assumption that a %50 duty-cycle value will cause the regulator
+ voltage to run at half way between the supplied max_uV and min_uV values.
+
+ If voltage-table is provided, then the device will be used in Voltage Table
+ Mode. If no voltage-table is provided, then the device will be used in
+ Continuous Voltage Mode.
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ const: pwm-regulator
+
+ pwms:
+ maxItems: 1
+
+ voltage-table:
+ description: Voltage and Duty-Cycle table.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: voltage in microvolts (uV)
+ - description: duty-cycle in percent (%)
+
+ enable-gpios:
+ description: Regulator enable GPIO
+ maxItems: 1
+
+ # Optional properties for Continuous mode:
+ pwm-dutycycle-unit:
+ description:
+ Integer value encoding the duty cycle unit. If not
+ defined, <100> is assumed, meaning that
+ pwm-dutycycle-range contains values expressed in
+ percent.
+ default: 100
+
+ pwm-dutycycle-range:
+ description:
+ Should contain 2 entries. The first entry is encoding
+ the dutycycle for regulator-min-microvolt and the
+ second one the dutycycle for regulator-max-microvolt.
+ Duty cycle values are expressed in pwm-dutycycle-unit.
+ If not defined, <0 100> is assumed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: the dutycycle for regulator-min-microvolt
+ - description: the dutycycle for regulator-max-microvolt
+ default: [ 0 100 ]
+
+required:
+ - compatible
+ - pwms
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ // Continuous Voltage With Enable GPIO Example:
+ regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 8448 0>;
+ enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+ /* unit == per-mille */
+ pwm-dutycycle-unit = <1000>;
+ /*
+ * Inverted PWM logic, and the duty cycle range is limited
+ * to 30%-70%.
+ */
+ pwm-dutycycle-range = <700 300>; /* */
+ };
+
+ - |
+ // Voltage Table Example:
+ regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+
+ /* Voltage Duty-Cycle */
+ voltage-table = <1114000 0>,
+ <1095000 10>,
+ <1076000 20>,
+ <1056000 30>,
+ <1036000 40>,
+ <1016000 50>;
+ };
+...
For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
+ For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l17, l18
+
For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l13, l14, l15, l16, l17, l18
- qcom,rpm-mp5496-regulators
- qcom,rpm-pm8226-regulators
- qcom,rpm-pm8841-regulators
+ - qcom,rpm-pm8909-regulators
- qcom,rpm-pm8916-regulators
- qcom,rpm-pm8941-regulators
- qcom,rpm-pm8950-regulators
+++ /dev/null
-Qualcomm SPMI Regulators
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8004-regulators"
- "qcom,pm8005-regulators"
- "qcom,pm8226-regulators"
- "qcom,pm8841-regulators"
- "qcom,pm8916-regulators"
- "qcom,pm8941-regulators"
- "qcom,pm8950-regulators"
- "qcom,pm8994-regulators"
- "qcom,pmi8994-regulators"
- "qcom,pm660-regulators"
- "qcom,pm660l-regulators"
- "qcom,pms405-regulators"
-
-- interrupts:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: List of OCP interrupts.
-
-- interrupt-names:
- Usage: required if 'interrupts' property present
- Value type: <string-array>
- Definition: List of strings defining the names of the
- interrupts in the 'interrupts' property 1-to-1.
- Supported values are "ocp-<regulator_name>", where
- <regulator_name> corresponds to a voltage switch
- type regulator.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
- Usage: optional (pm8841 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l3-supply:
-- vdd_l2-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l11_l14_l15_l16-supply:
-- vdd_l9_l10_l12_l13_l17_l18-supply:
- Usage: optional (pm8916 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs_1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
- Usage: optional (pm8941 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
- Usage: optional (pm8950 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l29-supply:
-- vdd_l20_l21-supply:
-- vdd_l25-supply:
-- vdd_lvs_1_2-supply:
- Usage: optional (pm8994 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1-supply:
- Usage: optional (pmi8994 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l6_l7-supply:
-- vdd_l2_l3-supply:
-- vdd_l5-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14-supply:
-- vdd_l15_l16_l17_l18_l19-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
- Usage: optional (pm660 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l9_l10-supply:
-- vdd_l2-supply:
-- vdd_l3_l5_l7_l8-supply:
-- vdd_l4_l6-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
- Usage: optional (pm660l only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l10_l11_l12_l13-supply:
-- vdd_l7-supply:
-- vdd_l9-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply
- Usage: optional (pms405 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- qcom,saw-reg:
- Usage: optional
- Value type: <phandle>
- Description: Reference to syscon node defining the SAW registers.
-
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the PMICs below.
-
-pm8004:
- s2, s5
-
-pm8005:
- s1, s2, s3, s4
-
-pm8841:
- s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
- s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
- l14, l15, l16, l17, l18
-
-pm8941:
- s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
- l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
- 5vs1, 5vs2
-
-pm8994:
- s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
- l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
- l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pmi8994:
- s1, s2, s3, l1
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-- regulator-initial-mode:
- Usage: optional
- Value type: <u32>
- Description: 2 = Set initial mode to auto mode (automatically select
- between HPM and LPM); not available on boost type
- regulators.
-
- 1 = Set initial mode to high power mode (HPM), also referred
- to as NPM. HPM consumes more ground current than LPM, but
- it can source significantly higher load current. HPM is not
- available on boost type regulators. For voltage switch type
- regulators, HPM implies that over current protection and
- soft start are active all the time.
-
- 0 = Set initial mode to low power mode (LPM).
-
-- qcom,ocp-max-retries:
- Usage: optional
- Value type: <u32>
- Description: Maximum number of times to try toggling a voltage switch
- off and back on as a result of consecutive over current
- events.
-
-- qcom,ocp-retry-delay:
- Usage: optional
- Value type: <u32>
- Description: Time to delay in milliseconds between each voltage switch
- toggle after an over current event takes place.
-
-- qcom,pin-ctrl-enable:
- Usage: optional
- Value type: <u32>
- Description: Bit mask specifying which hardware pins should be used to
- enable the regulator, if any; supported bits are:
- 0 = ignore all hardware enable signals
- BIT(0) = follow HW0_EN signal
- BIT(1) = follow HW1_EN signal
- BIT(2) = follow HW2_EN signal
- BIT(3) = follow HW3_EN signal
-
-- qcom,pin-ctrl-hpm:
- Usage: optional
- Value type: <u32>
- Description: Bit mask specifying which hardware pins should be used to
- force the regulator into high power mode, if any;
- supported bits are:
- 0 = ignore all hardware enable signals
- BIT(0) = follow HW0_EN signal
- BIT(1) = follow HW1_EN signal
- BIT(2) = follow HW2_EN signal
- BIT(3) = follow HW3_EN signal
- BIT(4) = follow PMIC awake state
-
-- qcom,vs-soft-start-strength:
- Usage: optional
- Value type: <u32>
- Description: This property sets the soft start strength for voltage
- switch type regulators; supported values are:
- 0 = 0.05 uA
- 1 = 0.25 uA
- 2 = 0.55 uA
- 3 = 0.75 uA
-
-- qcom,saw-slave:
- Usage: optional
- Value type: <boo>
- Description: SAW controlled gang slave. Will not be configured.
-
-- qcom,saw-leader:
- Usage: optional
- Value type: <boo>
- Description: SAW controlled gang leader. Will be configured as
- SAW regulator.
-
-Example:
-
- regulators {
- compatible = "qcom,pm8941-regulators";
- vdd_l1_l3-supply = <&s1>;
-
- s1: s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1400000>;
- };
-
- ...
-
- l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- };
-
- ....
- };
-
-Example 2:
-
- saw3: syscon@9A10000 {
- compatible = "syscon";
- reg = <0x9A10000 0x1000>;
- };
-
- ...
-
- spm-regulators {
- compatible = "qcom,pm8994-regulators";
- qcom,saw-reg = <&saw3>;
- s8 {
- qcom,saw-slave;
- };
- s9 {
- qcom,saw-slave;
- };
- s10 {
- qcom,saw-slave;
- };
- pm8994_s11_saw: s11 {
- qcom,saw-leader;
- regulator-always-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1140000>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Regulators
+
+maintainers:
+ - Robert Marko <robimarko@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm660-regulators
+ - qcom,pm660l-regulators
+ - qcom,pm8004-regulators
+ - qcom,pm8005-regulators
+ - qcom,pm8226-regulators
+ - qcom,pm8841-regulators
+ - qcom,pm8916-regulators
+ - qcom,pm8941-regulators
+ - qcom,pm8950-regulators
+ - qcom,pm8994-regulators
+ - qcom,pmi8994-regulators
+ - qcom,pmp8074-regulators
+ - qcom,pms405-regulators
+
+ qcom,saw-reg:
+ description: Reference to syscon node defining the SAW registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+ "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+ description: List of regulators and its properties
+ type: object
+ $ref: regulator.yaml#
+
+ properties:
+ qcom,ocp-max-retries:
+ description:
+ Maximum number of times to try toggling a voltage switch off and
+ back on as a result of consecutive over current events
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,ocp-retry-delay:
+ description:
+ Time to delay in milliseconds between each voltage switch toggle
+ after an over current event takes place
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,pin-ctrl-enable:
+ description:
+ Bit mask specifying which hardware pins should be used to enable the
+ regulator, if any.
+ Supported bits are
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ qcom,pin-ctrl-hpm:
+ description:
+ Bit mask specifying which hardware pins should be used to force the
+ regulator into high power mode, if any.
+ Supported bits are
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ BIT(4) = follow PMIC awake state
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ qcom,vs-soft-start-strength:
+ description:
+ This property sets the soft start strength for voltage switch type
+ regulators.
+ Supported values are
+ 0 = 0.05 uA
+ 1 = 0.25 uA
+ 2 = 0.55 uA
+ 3 = 0.75 uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+
+ qcom,saw-slave:
+ description: SAW controlled gang slave. Will not be configured.
+ type: boolean
+
+ qcom,saw-leader:
+ description:
+ SAW controlled gang leader. Will be configured as SAW regulator.
+ type: boolean
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660-regulators
+ then:
+ properties:
+ vdd_l15_l16_l17_l18_l19-supply: true
+ vdd_l1_l6_l7-supply: true
+ vdd_l2_l3-supply: true
+ vdd_l5-supply: true
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
+ patternProperties:
+ "^vdd_s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660l-regulators
+ then:
+ properties:
+ vdd_l1_l9_l10-supply: true
+ vdd_l2-supply: true
+ vdd_l3_l5_l7_l8-supply: true
+ vdd_l4_l6-supply: true
+ patternProperties:
+ "^vdd_s[1-5]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8004-regulators
+ then:
+ patternProperties:
+ "^vdd_s[25]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8005-regulators
+ then:
+ patternProperties:
+ "^vdd_s[1-4]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8226-regulators
+ then:
+ properties:
+ vdd_l10_l11_l13-supply: true
+ vdd_l12_l14-supply: true
+ vdd_l15_l16_l17_l18-supply: true
+ vdd_l19_l20_l21_l22_l23_l28-supply: true
+ vdd_l1_l2_l4_l5-supply: true
+ vdd_l25-supply: true
+ vdd_l3_l24_l26-supply: true
+ vdd_l6_l7_l8_l9_l27-supply: true
+ vdd_lvs1-supply: true
+ patternProperties:
+ "^vdd_s[1-5]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8841-regulators
+ then:
+ patternProperties:
+ "^vdd_s[1-8]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8916-regulators
+ then:
+ properties:
+ vdd_l1_l3-supply: true
+ vdd_l4_l5_l6-supply: true
+ vdd_l8_l11_l14_l15_l16-supply: true
+ vdd_l9_l10_l12_l13_l17_l18-supply: true
+ patternProperties:
+ "^vdd_l[27]-supply$": true
+ "^vdd_s[1-4]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8941-regulators
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: Over-current protection interrupt for 5V S1
+ - description: Over-current protection interrupt for 5V S2
+ interrupt-names:
+ items:
+ - const: ocp-5vs1
+ - const: ocp-5vs2
+ vdd_l13_l20_l23_l24-supply: true
+ vdd_l1_l3-supply: true
+ vdd_l21-supply: true
+ vdd_l2_lvs_1_2_3-supply: true
+ vdd_l4_l11-supply: true
+ vdd_l5_l7-supply: true
+ vdd_l6_l12_l14_l15-supply: true
+ vdd_l8_l16_l18_19-supply: true
+ vdd_l9_l10_l17_l22-supply: true
+ vin_5vs-supply: true
+ patternProperties:
+ "^vdd_s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8950-regulators
+ then:
+ properties:
+ vdd_l1_l19-supply: true
+ vdd_l20-supply: true
+ vdd_l21-supply: true
+ vdd_l2_l23-supply: true
+ vdd_l3-supply: true
+ vdd_l4_l5_l6_l7_l16-supply: true
+ vdd_l8_l11_l12_l17_l22-supply: true
+ vdd_l9_l10_l13_l14_l15_l18-supply: true
+ patternProperties:
+ "^vdd_s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8994-regulators
+ then:
+ properties:
+ vdd_l1-supply: true
+ vdd_l13_l19_l23_l24-supply: true
+ vdd_l14_l15-supply: true
+ vdd_l17_l29-supply: true
+ vdd_l20_l21-supply: true
+ vdd_l25-supply: true
+ vdd_l2_l26_l28-supply: true
+ vdd_l3_l11-supply: true
+ vdd_l4_l27_l31-supply: true
+ vdd_l5_l7-supply: true
+ vdd_l6_l12_l32-supply: true
+ vdd_l8_l16_l30-supply: true
+ vdd_l9_l10_l18_l22-supply: true
+ vdd_lvs_1_2-supply: true
+ patternProperties:
+ "^vdd_s[1-9][0-2]?-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmi8994-regulators
+ then:
+ properties:
+ vdd_l1-supply: true
+ patternProperties:
+ "^vdd_s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmp8074-regulators
+ then:
+ properties:
+ vdd_l10_l11_l12_l13-supply: true
+ vdd_l1_l2-supply: true
+ vdd_l3_l8-supply: true
+ vdd_l5_l6_l15-supply: true
+ patternProperties:
+ "^vdd_l[479]-supply$": true
+ "^vdd_s[1-5]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pms405-regulators
+ then:
+ properties:
+ vdd_s3-supply: true
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ regulators {
+ compatible = "qcom,pm8941-regulators";
+ vdd_l1_l3-supply = <&s1>;
+
+ s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ };
+...
regulator-microvolt-offset:
description: Offset applied to voltages to compensate for voltage drops
+ $ref: "/schemas/types.yaml#/definitions/uint32"
regulator-min-microamp:
description: smallest current consumers may set
properties:
compatible:
- const: nuvoton,npcm750-reset
+ enum:
+ - nuvoton,npcm750-reset # Poleg NPCM7XX SoC
+ - nuvoton,npcm845-reset # Arbel NPCM8XX SoC
reg:
maxItems: 1
'#reset-cells':
const: 2
+ nuvoton,sysgcr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to access GCR registers.
+
nuvoton,sw-reset-number:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
- compatible
- reg
- '#reset-cells'
+ - nuvoton,sysgcr
additionalProperties: false
compatible = "nuvoton,npcm750-reset";
reg = <0xf0801000 0x70>;
#reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
nuvoton,sw-reset-number = <2>;
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ const: sunplus,sp7021-reset
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ rstc: reset@9c000054 {
+ compatible = "sunplus,sp7021-reset";
+ reg = <0x9c000054 0x28>;
+ #reset-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-sc-rtc
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ rtc {
+ compatible = "fsl,imx8qxp-sc-rtc";
+ };
+++ /dev/null
-BCM2835 PM (Power domains, watchdog)
-
-The PM block controls power domains and some reset lines, and includes
-a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt
-binding which covered some of PM's register range and functionality.
-
-Required properties:
-
-- compatible: Should be "brcm,bcm2835-pm"
-- reg: Specifies base physical address and size of the two
- register ranges ("PM" and "ASYNC_BRIDGE" in that
- order)
-- clocks: a) v3d: The V3D clock from CPRMAN
- b) peri_image: The PERI_IMAGE clock from CPRMAN
- c) h264: The H264 clock from CPRMAN
- d) isp: The ISP clock from CPRMAN
-- #reset-cells: Should be 1. This property follows the reset controller
- bindings[1].
-- #power-domain-cells: Should be 1. This property follows the power domain
- bindings[2].
-
-Optional properties:
-
-- timeout-sec: Contains the watchdog timeout in seconds
-- system-power-controller: Whether the watchdog is controlling the
- system power. This node follows the power controller bindings[3].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/power/power-controller.txt
-
-Example:
-
-pm {
- compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
- #power-domain-cells = <1>;
- #reset-cells = <1>;
- reg = <0x7e100000 0x114>,
- <0x7e00a000 0x24>;
- clocks = <&clocks BCM2835_CLOCK_V3D>,
- <&clocks BCM2835_CLOCK_PERI_IMAGE>,
- <&clocks BCM2835_CLOCK_H264>,
- <&clocks BCM2835_CLOCK_ISP>;
- clock-names = "v3d", "peri_image", "h264", "isp";
- system-power-controller;
-};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+ The PM block controls power domains and some reset lines, and includes a
+ watchdog timer.
+
+maintainers:
+ - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+ - $ref: /schemas/watchdog/watchdog.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm2835-pm
+ - brcm,bcm2711-pm
+ - const: brcm,bcm2835-pm-wdt
+
+ reg:
+ minItems: 2
+ maxItems: 3
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: pm
+ - const: asb
+ - const: rpivid_asb
+
+ "#power-domain-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: v3d
+ - const: peri_image
+ - const: h264
+ - const: isp
+
+ system-power-controller:
+ type: boolean
+
+ timeout-sec: true
+
+required:
+ - compatible
+ - reg
+ - "#power-domain-cells"
+ - "#reset-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ watchdog@7e100000 {
+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x7e100000 0x114>,
+ <0x7e00a000 0x24>;
+ reg-names = "pm", "asb";
+ clocks = <&clocks BCM2835_CLOCK_V3D>,
+ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+ <&clocks BCM2835_CLOCK_H264>,
+ <&clocks BCM2835_CLOCK_ISP>;
+ clock-names = "v3d", "peri_image", "h264", "isp";
+ system-power-controller;
+ };
compatible:
enum:
- mediatek,mt6779-devapc
+ - mediatek,mt8186-devapc
reg:
description: The base address of devapc register bank
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+ Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+ data path or MDP data path.
+ In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+ the shadow register.
+ MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-disp-mutex
+ - mediatek,mt2712-disp-mutex
+ - mediatek,mt8167-disp-mutex
+ - mediatek,mt8173-disp-mutex
+ - mediatek,mt8183-disp-mutex
+ - mediatek,mt8186-disp-mutex
+ - mediatek,mt8192-disp-mutex
+ - mediatek,mt8195-disp-mutex
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: MUTEX Clock
+
+ mediatek,gce-events:
+ description:
+ The event id which is mapping to the specific hardware event signal
+ to gce. The event id is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ mediatek,gce-client-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property. Each GCE subsys id is mapping to
+ a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mutex: mutex@14020000 {
+ compatible = "mediatek,mt8173-disp-mutex";
+ reg = <0 0x14020000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+ <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS) Device Tree Bindings
+
+maintainers:
+ - Roger Lu <roger.lu@mediatek.com>
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+ The SVS engine is a piece of hardware which has several
+ controllers(banks) for calculating suitable voltage to
+ different power domains(CPU/GPU/CCI) according to
+ chip process corner, temperatures and other factors. Then DVFS
+ driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8183-svs
+ - mediatek,mt8192-svs
+
+ reg:
+ maxItems: 1
+ description: Address range of the MTK SVS controller.
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Main clock for MTK SVS controller to work.
+
+ clock-names:
+ const: main
+
+ nvmem-cells:
+ minItems: 1
+ description:
+ Phandle to the calibration data provided by a nvmem device.
+ items:
+ - description: SVS efuse for SVS controller
+ - description: Thermal efuse for SVS controller
+
+ nvmem-cell-names:
+ items:
+ - const: svs-calibration-data
+ - const: t-calibration-data
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: svs_rst
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ svs@1100b000 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+ };
+ };
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Atmel Timer Counter Block
"^pwm@[0-2]$":
description: The timer block channels that are used as PWMs.
- $ref: ../../pwm/pwm.yaml#
+ $ref: /schemas/pwm/pwm.yaml#
type: object
properties:
compatible:
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
- qcom,sm8150-aoss-qmp
- qcom,sm8250-aoss-qmp
- qcom,sm8350-aoss-qmp
+ - qcom,sm8450-aoss-qmp
- const: qcom,aoss-qmp
reg:
qcom,tcs-config:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 4
+ maxItems: 4
items:
- - items:
- - description: TCS type
- enum: [ 0, 1, 2, 3 ]
- - description: Number of TCS
- - items:
- - description: TCS type
- enum: [ 0, 1, 2, 3 ]
- - description: Number of TCS
- - items:
- - description: TCS type
- enum: [ 0, 1, 2, 3]
- - description: Numbe r of TCS
- - items:
- - description: TCS type
- enum: [ 0, 1, 2, 3 ]
- - description: Number of TCS
+ items:
+ - description: |
+ TCS type::
+ - ACTIVE_TCS
+ - SLEEP_TCS
+ - WAKE_TCS
+ - CONTROL_TCS
+ enum: [ 0, 1, 2, 3 ]
+ - description: Number of TCS
description: |
The tuple defining the configuration of TCS. Must have two cells which
describe each TCS type. The order of the TCS must match the hardware
configuration.
- Cell 1 (TCS Type):: TCS types to be specified::
- - ACTIVE_TCS
- - SLEEP_TCS
- - WAKE_TCS
- - CONTROL_TCS
- Cell 2 (Number of TCS):: <u32>
qcom,tcs-offset:
$ref: /schemas/types.yaml#/definitions/uint32
- qcom,rpm-apq8084
- qcom,rpm-ipq6018
- qcom,rpm-msm8226
+ - qcom,rpm-msm8909
- qcom,rpm-msm8916
- qcom,rpm-msm8936
- qcom,rpm-msm8953
$ref: /schemas/clock/qcom,rpmcc.yaml#
unevaluatedProperties: false
+ power-controller:
+ $ref: /schemas/power/qcom,rpmpd.yaml#
+
qcom,smd-channels:
$ref: /schemas/types.yaml#/definitions/string-array
description: Channel name used for the RPM communication
- qcom,sdm660-silver-saw2-v4.1-l2
- qcom,msm8998-gold-saw2-v4.1-l2
- qcom,msm8998-silver-saw2-v4.1-l2
+ - qcom,msm8909-saw2-v3.0-cpu
- qcom,msm8916-saw2-v3.0-cpu
- qcom,msm8226-saw2-v2.1-cpu
- qcom,msm8974-saw2-v2.1-cpu
Should reference the tx-enable and tx-rings-empty SMEM states.
qcom,smem-state-names:
- $ref: /schemas/types.yaml#/definitions/string-array
items:
- const: tx-enable
- const: tx-rings-empty
reg:
maxItems: 1
- assigned-clock-parents: true
- assigned-clocks: true
-
'#clock-cells':
const: 1
Must be identical to the that of the parent interrupt controller.
const: 3
+ reboot-mode:
+ $ref: /schemas/power/reset/syscon-reboot-mode.yaml
+ type: object
+ description:
+ Reboot mode to alter bootloader behavior for the next boot
+
syscon-poweroff:
- $ref: "../../power/reset/syscon-poweroff.yaml#"
+ $ref: /schemas/power/reset/syscon-poweroff.yaml#
type: object
description:
Node for power off method
syscon-reboot:
- $ref: "../../power/reset/syscon-reboot.yaml#"
+ $ref: /schemas/power/reset/syscon-reboot.yaml#
type: object
description:
Node for reboot method
pattern: "^usi@[0-9a-f]+$"
compatible:
- enum:
- - samsung,exynos850-usi # for USIv2 (Exynos850, ExynosAutoV9)
+ oneOf:
+ - items:
+ - const: samsung,exynosautov9-usi
+ - const: samsung,exynos850-usi
+ - enum:
+ - samsung,exynos850-usi
reg: true
- ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
- ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
- ti,am5728-pruss # for AM57xx SoC family
- - ti,k2g-pruss # for 66AK2G SoC family
+ - ti,am625-pruss # for K3 AM62x SoC family
+ - ti,am642-icssg # for K3 AM64x SoC family
- ti,am654-icssg # for K3 AM65x SoC family
- ti,j721e-icssg # for K3 J721E SoC family
- - ti,am642-icssg # for K3 AM64x SoC family
+ - ti,k2g-pruss # for 66AK2G SoC family
reg:
maxItems: 1
compatible:
items:
- enum:
+ - renesas,r9a07g043-ssi # RZ/G2UL
- renesas,r9a07g044-ssi # RZ/G2{L,LC}
- renesas,r9a07g054-ssi # RZ/V2L
- const: renesas,rz-ssi
minItems: 1
maxItems: 2
description:
- The first cell represents a phandle to dmac
+ The first cell represents a phandle to dmac.
The second cell specifies the encoded MID/RID values of the SSI port
connected to the DMA client and the slave channel configuration
parameters.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SPI device
+
+maintainers:
+ - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: atmel,at91rm9200-spi
+ - items:
+ - const: microchip,sam9x60-spi
+ - const: atmel,at91rm9200-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ contains:
+ const: spi_clk
+
+ clocks:
+ maxItems: 1
+
+ atmel,fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum number of data the RX and TX FIFOs can store for FIFO
+ capable SPI controllers.
+ enum: [ 16, 32 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi1: spi@fffcc000 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x4000>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+ atmel,fifo-size = <32>;
+
+ mmc@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&pioC 4 GPIO_ACTIVE_HIGH>; /* CD */
+ spi-max-frequency = <25000000>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP spi controller flash interface
+
+maintainers:
+ - Nick Hawkins <nick.hawkins@hpe.com>
+ - Jean-Marie Verdun <verdun@hpe.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: hpe,gxp-spifi
+
+ reg:
+ items:
+ - description: cfg registers
+ - description: data registers
+ - description: mapped memory
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ spi@200 {
+ compatible = "hpe,gxp-spifi";
+ reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
+ interrupts = <20>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ };
+
+ flash@1 {
+ reg = <1>;
+ compatible = "jedec,spi-nor";
+ };
+ };
- items:
- enum:
- mediatek,mt7629-spi
+ - mediatek,mt8365-spi
- const: mediatek,mt7622-spi
- items:
- enum:
- items:
- enum:
- mediatek,mt7986-spi-ipm
+ - mediatek,mt8188-spi-ipm
- const: mediatek,spi-ipm
- items:
- enum:
properties:
compatible:
oneOf:
+ - enum:
+ - mediatek,mt8173-nor
+ - mediatek,mt8186-nor
+ - mediatek,mt8192-nor
- items:
- enum:
- mediatek,mt2701-nor
- mediatek,mt7622-nor
- mediatek,mt7623-nor
- mediatek,mt7629-nor
- - mediatek,mt8186-nor
- - mediatek,mt8192-nor
- mediatek,mt8195-nor
- - enum:
- - mediatek,mt8173-nor
- - items:
- const: mediatek,mt8173-nor
+ - items:
+ - enum:
+ - mediatek,mt8188-nor
+ - const: mediatek,mt8186-nor
+
reg:
maxItems: 1
required:
- compatible
- reg
- - interrupts
- clocks
- clock-names
FIU0 and FIUx supports two chip selects,
FIU3 support four chip select.
+The NPCM8XX supports four FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU1 and FIU3 supports four chip selects.
+
Required properties:
- - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+ - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
+ "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
- #address-cells : should be 1.
- #size-cells : should be 0.
- reg : the first contains the register location and length,
fiu1 represent fiu 3 controller
fiu2 represent fiu x controller
+ In the NPCM8XX BMC:
+ fiu0 represent fiu 0 controller
+ fiu1 represent fiu 1 controller
+ fiu2 represent fiu 3 controller
+ fiu3 represent fiu x controller
+
Example:
fiu3: spi@c00000000 {
compatible = "nuvoton,npcm750-fiu";
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Tegra Quad SPI Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+ nvidia,tx-clk-tap-delay:
+ description:
+ Delays the clock going out to device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ nvidia,rx-clk-tap-delay:
+ description:
+ Delays the clock coming in from the device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+unevaluatedProperties: true
+
- nvidia,tegra186-qspi
- nvidia,tegra194-qspi
- nvidia,tegra234-qspi
+ - nvidia,tegra241-qspi
reg:
maxItems: 1
spi-tx-bus-width:
enum: [1, 2, 4]
- nvidia,tx-clk-tap-delay:
- description:
- Delays the clock going out to device with this tap value.
- Tap value varies based on platform design trace lengths from Tegra
- QSPI to corresponding slave device.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 31
-
- nvidia,rx-clk-tap-delay:
- description:
- Delays the clock coming in from the device with this tap value.
- Tap value varies based on platform design trace lengths from Tegra
- QSPI to corresponding slave device.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 255
-
- required:
- - reg
-
required:
- compatible
- reg
- const: rx
interconnects:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
interconnect-names:
+ minItems: 2
items:
- const: qup-core
- const: qup-config
+ - const: qup-memory
interrupts:
maxItems: 1
- samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
- samsung,s3c6410-spi
- samsung,s5pv210-spi # for S5PV210 and S5PC110
+ - samsung,exynos4210-spi
- samsung,exynos5433-spi
+ - samsung,exynosautov9-spi
- tesla,fsd-spi
- const: samsung,exynos7-spi
deprecated: true
properties:
compatible:
contains:
- const: samsung,exynos5433-spi
+ enum:
+ - samsung,exynos5433-spi
+ - samsung,exynosautov9-spi
then:
properties:
clocks:
- const: snps,dw-apb-ssi
- description: Intel Keem Bay SPI Controller
const: intel,keembay-ssi
+ - description: Intel Thunder Bay SPI Controller
+ const: intel,thunderbay-ssi
- description: Baikal-T1 SPI Controller
const: baikal,bt1-ssi
- description: Baikal-T1 System Boot SPI Controller
rx-sample-delay-ns:
default: 0
- description: Default value of the rx-sample-delay-ns property.
+ description: |
+ Default value of the rx-sample-delay-ns property.
This value will be used if the property is not explicitly defined
- for a SPI slave device. See below.
+ for a SPI slave device.
+
+ SPI Rx sample delay offset, unit is nanoseconds.
+ The delay from the default sample time before the actual sample of the
+ rxd input signal occurs. The "rx_sample_delay" is an optional feature
+ of the designware controller, and the upper limit is also subject to
+ controller configuration.
patternProperties:
"^.*@[0-9a-f]+$":
minimum: 0
maximum: 3
- spi-rx-bus-width:
- const: 1
-
- spi-tx-bus-width:
- const: 1
-
- rx-sample-delay-ns:
- description: SPI Rx sample delay offset, unit is nanoseconds.
- The delay from the default sample time before the actual
- sample of the rxd input signal occurs. The "rx_sample_delay"
- is an optional feature of the designware controller, and the
- upper limit is also subject to controller configuration.
-
unevaluatedProperties: false
required:
enum: [ 0, 1 ]
default: 0
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+
unevaluatedProperties: false
examples:
type: object
$ref: spi-peripheral-props.yaml
+ properties:
+ spi-cpha:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- reg
};
flash@2 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <2>, <3>;
- stacked-memories = /bits/ 64 <0x10000000 0x10000000>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <2>, <3>;
+ stacked-memories = /bits/ 64 <0x10000000 0x10000000>;
};
};
description:
The device requires 3-wire mode.
- spi-cpha:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The device requires shifted clock phase (CPHA) mode.
-
- spi-cpol:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The device requires inverse clock polarity (CPOL) mode.
-
spi-cs-high:
$ref: /schemas/types.yaml#/definitions/flag
description:
description:
Delay, in microseconds, after a read transfer.
+ rx-sample-delay-ns:
+ description: SPI Rx sample delay offset, unit is nanoseconds.
+ The delay from the default sample time before the actual
+ sample of the rxd input signal occurs.
+
spi-tx-bus-width:
description:
Bus width to the SPI bus used for write transfers.
allOf:
- $ref: cdns,qspi-nor-peripheral-props.yaml#
- $ref: samsung,spi-peripheral-props.yaml#
+ - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
additionalProperties: true
clocks:
maxItems: 2
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+
unevaluatedProperties: false
examples:
+++ /dev/null
-Atmel SPI device
-
-Required properties:
-- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi".
-- reg: Address and length of the register set for the device
-- interrupts: Should contain spi interrupt
-- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
- Chip Select Active After Transfer feature).
-- clock-names: tuple listing input clock names.
- Required elements: "spi_clk"
-- clocks: phandles to input clocks.
-
-Optional properties:
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
- capable SPI controllers.
-
-Example:
-
-spi1: spi@fffcc000 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0xfffcc000 0x4000>;
- interrupts = <13 4 5>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&spi1_clk>;
- clock-names = "spi_clk";
- cs-gpios = <&pioB 3 0>;
- atmel,fifo-size = <32>;
-
- mmc-slot@0 {
- compatible = "mmc-spi-slot";
- reg = <0>;
- gpios = <&pioC 4 0>; /* CD */
- spi-max-frequency = <25000000>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8qxp-sc-thermal
+ - const: fsl,imx-sc-thermal
+
+ '#thermal-sensor-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal-sensor {
+ compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+ #thermal-sensor-cells = <1>;
+ };
- allwinner,suniv-f1c100s-timer
- items:
- enum:
+ - allwinner,sun20i-d1-timer
- allwinner,sun50i-a64-timer
- allwinner,sun50i-h6-timer
- allwinner,sun50i-h616-timer
patternProperties:
"^watchdog@[a-f0-9]+$":
type: object
- $ref: ../watchdog/watchdog.yaml#
+ $ref: /schemas/watchdog/watchdog.yaml#
properties:
compatible:
oneOf:
"^pwm@[a-f0-9]+$":
type: object
- $ref: ../pwm/pwm.yaml#
+ $ref: /schemas/pwm/pwm.yaml#
properties:
compatible:
oneOf:
MediaTek Timers
---------------
-MediaTek SoCs have two different timers on different platforms,
+MediaTek SoCs have different timers on different platforms,
+- CPUX (ARM/ARM64 System Timer)
- GPT (General Purpose Timer)
- SYST (System Timer)
* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
+ For those SoCs that use CPUX
+ * "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
+
- reg: Should contain location and length for timer register.
- clocks: Should contain system clock.
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
properties:
compatible:
enum:
- nuvoton,wpcm450-timer # for Hermon WPCM450
- nuvoton,npcm750-timer # for Poleg NPCM750
+ - nuvoton,npcm845-timer # for Arbel NPCM845
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+
+description: >
+ The Tegra timer provides 29-bit timer counters and a 32-bit timestamp
+ counter. Each NV timer selects its timing reference signal from the 1 MHz
+ reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
+ programmed to generate one-shot, periodic, or watchdog interrupts.
+
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra186-timer
+ description: >
+ The Tegra186 timer provides ten 29-bit timer counters.
+ - const: nvidia,tegra234-timer
+ description: >
+ The Tegra234 timer provides sixteen 29-bit timer counters.
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra186-timer
+ then:
+ properties:
+ interrupts:
+ maxItems: 10
+ description: >
+ One per each timer channels 0 through 9.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra234-timer
+ then:
+ properties:
+ interrupts:
+ maxItems: 16
+ description: >
+ One per each timer channels 0 through 15.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@2080000 {
+ compatible = "nvidia,tegra234-timer";
+ reg = <0x02080000 0x00121000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
- renesas,r8a77980-cmt0 # 32-bit CMT0 on R-Car V3H
- renesas,r8a77990-cmt0 # 32-bit CMT0 on R-Car E3
- renesas,r8a77995-cmt0 # 32-bit CMT0 on R-Car D3
- - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
- const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
- items:
- renesas,r8a77980-cmt1 # 48-bit CMT on R-Car V3H
- renesas,r8a77990-cmt1 # 48-bit CMT on R-Car E3
- renesas,r8a77995-cmt1 # 48-bit CMT on R-Car D3
- - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
- const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
+ - items:
+ - enum:
+ - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
+ - renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8
+ - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
+
+ - items:
+ - enum:
+ - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
+ - renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8
+ - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
+
reg:
maxItems: 1
enum:
- renesas,rcar-gen2-cmt0
- renesas,rcar-gen3-cmt0
+ - renesas,rcar-gen4-cmt0
then:
properties:
interrupts:
enum:
- renesas,rcar-gen2-cmt1
- renesas,rcar-gen3-cmt1
+ - renesas,rcar-gen4-cmt1
then:
properties:
interrupts:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/st,nomadik-mtu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the ST Microelectronics Nomadik
+ SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500.
+
+properties:
+ compatible:
+ items:
+ - const: st,nomadik-mtu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: The first clock named TIMCLK clocks the actual timers and
+ the second clock clocks the digital interface to the interconnect.
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: timclk
+ - const: apb_pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mfd/dbx500-prcmu.h>
+ timer@a03c6000 {
+ compatible = "st,nomadik-mtu";
+ reg = <0xa03c6000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+ clock-names = "timclk", "apb_pclk";
+ };
- adi,adp5585-02
# Analog Devices ADP5589 Keypad Decoder and I/O Expansion
- adi,adp5589
+ # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
+ - adi,lt7182s
# AMS iAQ-Core VOC Sensor
- ams,iaq-core
# i2c serial eeprom (24cxx)
- items:
- enum:
- allwinner,sun8i-a83t-musb
+ - allwinner,sun20i-d1-musb
- allwinner,sun50i-h6-musb
- const: allwinner,sun8i-a33-musb
- items:
"atmel,at91sam9g45-udc"
"atmel,sama5d3-udc"
"microchip,sam9x60-udc"
+ "microchip,lan9662-udc"
+ For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+ is required.
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- clocks: Should reference the peripheral and host clocks
- allwinner,sun8i-h3-ehci
- allwinner,sun8i-r40-ehci
- allwinner,sun9i-a80-ehci
+ - allwinner,sun20i-d1-ehci
- aspeed,ast2400-ehci
- aspeed,ast2500-ehci
- aspeed,ast2600-ehci
- allwinner,sun8i-h3-ohci
- allwinner,sun8i-r40-ohci
- allwinner,sun9i-a80-ohci
+ - allwinner,sun20i-d1-ohci
- brcm,bcm3384-ohci
- brcm,bcm63268-ohci
- brcm,bcm6328-ohci
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
description: Hardkernel Co., Ltd
+ "^hechuang,.*":
+ description: Shenzhen Hechuang Intelligent Co.
"^hideep,.*":
description: HiDeep Inc.
"^himax,.*":
description: SGX Sensortech
"^sharp,.*":
description: Sharp Corporation
+ "^shift,.*":
+ description: SHIFT GmbH
"^shimafuji,.*":
description: Shimafuji Electric, Inc.
"^shiratech,.*":
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8qxp-sc-wdt
+ - const: fsl,imx-sc-wdt
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
Required properties:
- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
- "nuvoton,wpcm450-wdt" for WPCM450 (Hermon).
+ "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+ "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
- reg : Offset and length of the register set for the device.
- interrupts : Contain the timer interrupt with flags for
falling edge.
| alpha: | TODO |
| arc: | ok |
| arm: | TODO |
- | arm64: | TODO |
+ | arm64: | ok |
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
persistent and could change even while the overlay filesystem is mounted, as
summarized in the `Inode properties`_ table above.
-4) "idmapped mounts"
-When the upper or lower layers are idmapped mounts overlayfs will be mounted
-without support for POSIX Access Control Lists (ACLs). This limitation will
-eventually be lifted.
Changes to underlying filesystems
---------------------------------
In the ACPI _DSD context it is an element of the sub-package following the
generic Device Properties UUID in the _DSD return package as specified in the
-Device Properties UUID definition document [1]_.
+section titled "Well-Known _DSD UUIDs and Data Structure Formats" sub-section
+"Device Properties UUID" in _DSD (Device Specific Data) Implementation Guide
+document [1]_.
It also may be regarded as the definition of a key and the associated data type
that can be returned by _DSD in the Device Properties UUID sub-package for a
associated with an additional key (name) allowing the subset to be referred
to as a whole (and to be treated as a separate entity). The canonical
representation of property subsets is via the mechanism specified in the
-Hierarchical Properties Extension UUID definition document [2]_.
+section titled "Well-Known _DSD UUIDs and Data Structure Formats" sub-section
+"Hierarchical Data Extension UUID" in _DSD (Device Specific Data)
+Implementation Guide document [1]_.
Property sets may be hierarchical. That is, a property set may contain
multiple property subsets that each may contain property subsets of its
References
==========
-.. [1] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
-.. [2] https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf
+.. [1] https://github.com/UEFI/DSD-Guide
0x00000008 Memory Correctable
0x00000010 Memory Uncorrectable non-fatal
# echo 0x12345000 > param1 # Set memory address for injection
- # echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page
+ # echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page
# echo 0x8 > error_type # Choose correctable memory error
# echo 1 > error_inject # Inject now
* Aquacomputer Farbwerk RGB controller
* Aquacomputer Farbwerk 360 RGB controller
* Aquacomputer Octo fan controller
+* Aquacomputer Quadro fan controller
Author: Aleksa Savic
The Octo exposes four temperature sensors and eight PWM controllable fans, along
with their speed (in RPM), power, voltage and current.
+The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
+fans, along with their speed (in RPM), power, voltage and current.
+
The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
not all sysfs and debugfs entries will be available.
Sysfs entries
-------------
-================ =============================================
+================ ==============================================
temp[1-4]_input Temperature sensors (in millidegrees Celsius)
-fan[1-2]_input Pump/fan speed (in RPM)
-power[1-2]_input Pump/fan power (in micro Watts)
-in[0-2]_input Pump/fan voltage (in milli Volts)
-curr[1-2]_input Pump/fan current (in milli Amperes)
-================ =============================================
+fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
+power[1-8]_input Pump/fan power (in micro Watts)
+in[0-7]_input Pump/fan voltage (in milli Volts)
+curr[1-8]_input Pump/fan current (in milli Amperes)
+pwm[1-8] Fan PWM (0 - 255)
+================ ==============================================
Debugfs entries
---------------
* ROG CROSSHAIR VIII FORMULA
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII IMPACT
+ * ROG MAXIMUS XI HERO
+ * ROG MAXIMUS XI HERO (WI-FI)
* ROG STRIX B550-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX X570-E GAMING
* ROG STRIX X570-E GAMING WIFI II
* ROG STRIX X570-F GAMING
* ROG STRIX X570-I GAMING
+ * ROG STRIX Z690-A GAMING WIFI D4
+ * ROG ZENITH II EXTREME
Authors:
- Eugene Shalygin <eugene.shalygin@gmail.com>
temp[1-10]_label RO Temperature sensor label.
=============================== ======= =======================================
+Due to the nature of the SMM interface, each pwmX attribute controls
+fan number X.
+
Disabling automatic BIOS fan control
------------------------------------
lm95234
lm95245
lochnagar
+ lt7182s
ltc2992
ltc2945
ltc2947
Supported chips:
+ * National Semiconductor LM84
+
+ Prefix: 'lm84'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
* National Semiconductor LM90
Prefix: 'lm90'
http://www.national.com/mpf/LM/LM86.html
+ * Analog Devices ADM1020
+
+ Prefix: 'adm1020'
+
+ Addresses scanned: I2C 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1021
+
+ Prefix: 'adm1021'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1021A/ADM1023
+
+ Prefix: 'adm1023'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
* Analog Devices ADM1032
Prefix: 'adm1032'
https://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+ * Analog Devices ADT7481
+
+ Prefix: 'adt7481'
+
+ Addresses scanned: I2C 0x4b and 0x4c
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7481
+
+ * Analog Devices ADT7482
+
+ Prefix: 'adt7482'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7482
+
+ * Analog Devices ADT7483A
+
+ Prefix: 'adt7483a'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7483A
+
* ON Semiconductor NCT1008
Prefix: 'nct1008'
https://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
+ * ON Semiconductor NCT210
+
+ Prefix: 'adm1021'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT210
+
+ * ON Semiconductor NCT214
+
+ Prefix: 'nct214'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT214
+
+ * ON Semiconductor NCT218
+
+ Prefix: 'nct218'
+
+ Addresses scanned: I2C 0x4c - 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT218
+
+ * ON Semiconductor NCT72
+
+ Prefix: 'nct72'
+
+ Addresses scanned: I2C 0x4c - 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT72
+
+ * Maxim MAX1617
+
+ Prefix: 'max1617'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * Maxim MAX1617A
+
+ Prefix: 'max1617a'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * Maxim MAX6642
+
+ Prefix: 'max6642'
+
+ Addresses scanned: I2C 0x48-0x4f
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
+
* Maxim MAX6646
Prefix: 'max6646'
* Maxim MAX6648
- Prefix: 'max6646'
+ Prefix: 'max6648'
Addresses scanned: I2C 0x4c
* Maxim MAX6692
- Prefix: 'max6646'
+ Prefix: 'max6648'
Addresses scanned: I2C 0x4c
https://www.ti.com/lit/gpn/tmp461
+ * Philips NE1617, NE1617A
+
+ Prefix: 'max1617' (probably detected as a max1617)
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheets: Publicly available at the Philips website
+
+ * Philips NE1618
+
+ Prefix: 'ne1618'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheets: Publicly available at the Philips website
+
+ * Genesys Logic GL523SM
+
+ Prefix: 'gl523sm'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet:
+
+ * TI THMC10
+
+ Prefix: 'thmc10'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the TI website
+
+ * Onsemi MC1066
+
+ Prefix: 'mc1066'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Onsemi website
+
Author: Jean Delvare <jdelvare@suse.de>
well as the temperature of up to one external diode. It is compatible
with many other devices, many of which are supported by this driver.
+The family of chips supported by this driver is derived from MAX1617.
+This chip as well as various compatible chips support a local and a remote
+temperature sensor with 8 bit accuracy. Later chips provide improved accuracy
+and other additional features such as hysteresis and temperature offset
+registers.
+
Note that there is no easy way to differentiate between the MAX6657,
MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
supported by this driver if the chip is located at address 0x4d or 0x4e,
The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
can't (and don't need to) be distinguished.
-The specificity of this family of chipsets over the ADM1021/LM84
-family is that it features critical limits with hysteresis, and an
-increased resolution of the remote temperature measurement.
-
The different chipsets of the family are not strictly identical, although
very similar. For reference, here comes a non-exhaustive list of specific
features:
+LM84:
+ * 8 bit sensor resolution
+
+ADM1020, ADM1021, GL523SM, MAX1617, NE1617, NE1617A, THMC10:
+ * 8 bit sensor resolution
+ * Low temperature limits
+
+NCT210, NE1618:
+ * 11 bit sensor resolution for remote temperature sensor
+ * Low temperature limits
+
+ADM1021A, ADM1023:
+ * Temperature offset register for remote temperature sensor
+ * 11 bit resolution for remote temperature sensor
+ * Low temperature limits
+
LM90:
+ * 11 bit resolution for remote temperature sensor
+ * Temperature offset register for remote temperature sensor
+ * Low and critical temperature limits
+ * Configurable conversion rate
* Filter and alert configuration register at 0xBF.
* ALERT is triggered by temperatures over critical limits.
ADT7461, ADT7461A, NCT1008:
* Extended temperature range (breaks compatibility)
* Lower resolution for remote temperature
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
+ * 10 bit temperature resolution
+
+ADT7481, ADT7482, ADT7483:
+ * Temperature offset register
+ * SMBus PEC support
+ * 10 bit temperature resolution for external sensors
+ * Two remote sensors
+ * Selectable address (ADT7483)
+
+MAX6642:
+ * No critical limit register
+ * Conversion rate not configurable
+ * Better local resolution (10 bit)
+ * 10 bit external sensor resolution
+
+MAX6646, MAX6647, MAX6649:
+ * Better local resolution
+ * Extended range unsigned external temperature
+
+MAX6648, MAX6692:
+ * Better local resolution
+ * Unsigned temperature
-MAX6654:
+MAX6654, MAX6690:
* Better local resolution
* Selectable address
* Remote sensor type selection
transaction completion, effectively doubling the register cache refresh time.
I guess reliability comes at a price, but it's quite expensive this time.
-So, as not everyone might enjoy the slowdown, PEC can be disabled through
-sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
-to that file to enable PEC again.
+So, as not everyone might enjoy the slowdown, PEC is disabled by default and
+can be enabled through sysfs. Just write 1 to the "pec" file and PEC will be
+enabled. Write 0 to that file to disable PEC again.
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver lt7182s
+=====================
+
+Supported chips:
+
+ * ADI LT7182S
+
+ Prefix: 'lt7182s'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/lt7182s.html
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+LT7182S is a Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with
+Digital Power System Management support.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for a LT7182S
+at address 0x4f on I2C bus #4::
+
+ # modprobe lt7182s
+ # echo lt7182s 0x4f > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring an entry in device tree.
+
+
+Sysfs attributes
+----------------
+
+======================= ====================================
+curr[1-2]_label "iin[12]"
+curr[1-2]_input Measured input current
+curr[1-2]_max Maximum input current
+curr[1-2]_max_alarm Current high alarm
+
+curr[3-4]_label "iout[1-2]"
+curr[3-4]_input Measured output current
+curr[3-4]_highest Highest measured output current
+curr[3-4]_max Maximum output current
+curr[3-4]_max_alarm Output current high alarm
+
+in[1-2]_label "vin[12]"
+in[1-2]_input Measured input voltage
+in[1-2]_highest Highest measured input voltage
+in[1-2]_crit Critical maximum input voltage
+in[1-2]_crit_alarm Input voltage critical high alarm
+in[1-2]_min Minimum input voltage
+in[1-2]_min_alarm Input voltage low alarm
+in[1-2]_rated_min Rated minimum input voltage
+in[1-2]_rated_max Rated maximum input voltage
+in1_reset_history Write to reset history for all attributes
+
+in[3-5]_label "vmon[1-3]"
+in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
+ Only available if enabled with MFR_ADC_CONTROL_LT7182S
+ command.
+
+in[3-4|6-7]_label "vout[1-2]"
+in[3-4|6-7]_input Measured output voltage
+in[3-4|6-7]_highest Highest measured output voltage
+in[3-4|6-7]_lcrit Critical minimum output voltage
+in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
+in[3-4|6-7]_min Minimum output voltage
+in[3-4|6-7]_max_alarm Output voltage low alarm
+in[3-4|6-7]_max Maximum output voltage
+in[3-4|6-7]_max_alarm Output voltage high alarm
+in[3-4|6-7]_crit Critical maximum output voltage
+in[3-4|6-7]_crit_alarm Output voltage critical high alarm
+
+power[1-2]_label "pout[1-2]"
+power[1-2]_input Measured output power
+
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+temp1_max Maximum temperature
+temp1_max_alarm Chip temperature high alarm
+======================= ====================================
non-standard PMBus commands to standard commands, or to augment standard
command return values with device specific information.
+PEC Support
+===========
+
+Many PMBus devices support SMBus PEC (Packet Error Checking). If supported
+by both the I2C adapter and by the PMBus chip, it is by default enabled.
+If PEC is supported, the PMBus core driver adds an attribute named 'pec' to
+the I2C device. This attribute can be used to control PEC support in the
+communication with the PMBus chip.
+
API functions
=============
(*) dma_wmb();
(*) dma_rmb();
+ (*) dma_mb();
These are for use with consistent memory to guarantee the ordering
of writes or reads of shared memory accessible to both the CPU and a
The dma_rmb() allows us guarantee the device has released ownership
before we read the data from the descriptor, and the dma_wmb() allows
us to guarantee the data is written to the descriptor before the device
- can see it now has ownership. Note that, when using writel(), a prior
- wmb() is not needed to guarantee that the cache coherent memory writes
- have completed before writing to the MMIO region. The cheaper
- writel_relaxed() does not provide this guarantee and must not be used
- here.
+ can see it now has ownership. The dma_mb() implies both a dma_rmb() and
+ a dma_wmb(). Note that, when using writel(), a prior wmb() is not needed
+ to guarantee that the cache coherent memory writes have completed before
+ writing to the MMIO region. The cheaper writel_relaxed() does not provide
+ this guarantee and must not be used here.
See the subsection "Kernel I/O barrier effects" for more information on
relaxed I/O accessors and the Documentation/core-api/dma-api.rst file for
Default: 4K
sctp_wmem - vector of 3 INTEGERs: min, default, max
- Currently this tunable has no effect.
+ Only the first value ("min") is used, "default" and "max" are
+ ignored.
+
+ min: Minimum size of send buffer that can be used by SCTP sockets.
+ It is guaranteed to each SCTP socket (but not association) even
+ under moderate memory pressure.
+
+ Default: 4K
addr_scope_policy - INTEGER
Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
* ``void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type)``,
see: arch/x86/kernel/jump_label.c
-* ``__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type)``,
- see: arch/x86/kernel/jump_label.c
-
* ``struct jump_entry``,
see: arch/x86/include/asm/jump_label.h
* ::
- x0 = HVC_VHE_RESTART (arm64 only)
+ x0 = HVC_FINALISE_EL2 (arm64 only)
- Attempt to upgrade the kernel's exception level from EL1 to EL2 by enabling
- the VHE mode. This is conditioned by the CPU supporting VHE, the EL2 MMU
- being off, and VHE not being disabled by any other means (command line
- option, for example).
+ Finish configuring EL2 depending on the command-line options,
+ including an attempt to upgrade the kernel's exception level from
+ EL1 to EL2 by enabling the VHE mode. This is conditioned by the CPU
+ supporting VHE, the EL2 MMU being off, and VHE not being disabled by
+ any other means (command line option, for example).
Any other value of r0/x0 triggers a hypervisor-specific handling,
which is not documented here.
F: include/uapi/linux/virtio_9p.h
F: net/9p/
+A64FX DIAG DRIVER
+M: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
+S: Supported
+F: drivers/soc/fujitsu/a64fx-diag.c
+
A8293 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.ozlabs.org/project/linux-aspeed/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
+F: Documentation/devicetree/bindings/arm/aspeed/
F: arch/arm/boot/dts/aspeed-*
F: arch/arm/mach-aspeed/
N: aspeed
M: Nick Hawkins <nick.hawkins@hpe.com>
S: Maintained
F: Documentation/devicetree/bindings/arm/hpe,gxp.yaml
+F: Documentation/devicetree/bindings/spi/hpe,gxp-spi.yaml
F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
F: arch/arm/boot/dts/hpe-bmc*
F: arch/arm/boot/dts/hpe-gxp*
F: arch/arm/mach-hpe/
F: drivers/clocksource/timer-gxp.c
+F: drivers/spi/spi-gxp.c
F: drivers/watchdog/gxp-wdt.c
ARM/IGEP MACHINE SUPPORT
F: Documentation/devicetree/bindings/arm/npcm/*
F: arch/arm/boot/dts/nuvoton-npcm*
F: arch/arm/mach-npcm/
+F: arch/arm64/boot/dts/nuvoton/
F: drivers/*/*npcm*
F: drivers/*/*/*npcm*
F: include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
+F: include/dt-bindings/clock/nuvoton,npcm845-clk.h
ARM/NUVOTON WPCM450 ARCHITECTURE
M: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
+F: Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
+F: Documentation/devicetree/bindings/soc/renesas/
F: arch/arm64/boot/dts/renesas/
F: drivers/soc/renesas/
F: include/linux/soc/renesas/
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
+F: Documentation/devicetree/bindings/soc/renesas/
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/gr-peach*
F: arch/arm/boot/dts/iwg20d-q7*
N: stm32
N: stm
+ARM/SUNPLUS SP7021 SOC SUPPORT
+M: Qin Jian <qinjian@cqplus1.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for mon-subscribers)
+S: Maintained
+W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+F: Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
+F: Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
+F: Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
+F: Documentation/devicetree/bindings/reset/sunplus,reset.yaml
+F: arch/arm/boot/dts/sunplus-sp7021*.dts*
+F: arch/arm/configs/sp7021_*defconfig
+F: arch/arm/mach-sunplus/
+F: drivers/irqchip/irq-sp7021-intc.c
+F: drivers/reset/reset-sunplus.c
+F: include/dt-bindings/clock/sunplus,sp7021-clkc.h
+F: include/dt-bindings/reset/sunplus,sp7021-reset.h
+
ARM/Synaptics SoC support
M: Jisheng Zhang <jszhang@kernel.org>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: William Zhang <william.zhang@broadcom.com>
M: Anand Gore <anand.gore@broadcom.com>
M: Kursad Oney <kursad.oney@broadcom.com>
+M: Florian Fainelli <f.fainelli@gmail.com>
R: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/broadcom/stblinux.git
F: Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
-F: arch/arm/boot/dts/bcm47622.dtsi
-F: arch/arm/boot/dts/bcm947622.dts
+F: arch/arm64/boot/dts/broadcom/bcmbca/*
N: bcmbca
N: bcm[9]?47622
+N: bcm[9]?4912
+N: bcm[9]?63138
+N: bcm[9]?63146
+N: bcm[9]?63148
+N: bcm[9]?63158
+N: bcm[9]?63178
+N: bcm[9]?6756
+N: bcm[9]?6813
+N: bcm[9]?6846
+N: bcm[9]?6855
+N: bcm[9]?6856
+N: bcm[9]?6858
+N: bcm[9]?6878
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
F: arch/arm/boot/dts/bcm47189*
F: arch/arm/boot/dts/bcm53573*
-BROADCOM BCM63XX ARM ARCHITECTURE
-M: Florian Fainelli <f.fainelli@gmail.com>
-R: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-T: git git://github.com/broadcom/stblinux.git
-N: bcm63xx
-
BROADCOM BCM63XX/BCM33XX UDC DRIVER
M: Kevin Cernekee <cernekee@gmail.com>
L: linux-usb@vger.kernel.org
EROFS FILE SYSTEM
M: Gao Xiang <xiang@kernel.org>
M: Chao Yu <chao@kernel.org>
+R: Yue Hu <huyue2@coolpad.com>
+R: Jeffle Xu <jefflexu@linux.alibaba.com>
L: linux-erofs@lists.ozlabs.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
F: Documentation/admin-guide/perf/hisi-pmu.rst
F: drivers/perf/hisilicon
+HISILICON HNS3 PMU DRIVER
+M: Guangbin Huang <huangguangbin2@huawei.com>
+S: Supported
+F: Documentation/admin-guide/perf/hns3-pmu.rst
+F: drivers/perf/hisilicon/hns3_pmu.c
+
HISILICON QM AND ZIP Controller DRIVER
M: Zhou Wang <wangzhou1@hisilicon.com>
L: linux-crypto@vger.kernel.org
IDMAPPED MOUNTS
M: Christian Brauner <brauner@kernel.org>
+M: Seth Forshee <sforshee@kernel.org>
L: linux-fsdevel@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git
PWM SUBSYSTEM
M: Thierry Reding <thierry.reding@gmail.com>
R: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-M: Lee Jones <lee.jones@linaro.org>
L: linux-pwm@vger.kernel.org
S: Maintained
Q: https://patchwork.ozlabs.org/project/linux-pwm/list/
F: drivers/gpio/gpio-mvebu.c
F: drivers/pwm/
F: drivers/video/backlight/pwm_bl.c
+F: include/dt-bindings/pwm/
F: include/linux/pwm.h
F: include/linux/pwm_backlight.h
K: pwm_(config|apply_state|ops)
F: Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
F: drivers/i2c/busses/i2c-qcom-cci.c
+QUALCOMM INTERCONNECT BWMON DRIVER
+M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+F: drivers/soc/qcom/icc-bwmon.c
+
QUALCOMM IOMMU
M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux.dev
F: drivers/mailbox/mailbox-mpfs.c
F: drivers/pci/controller/pcie-microchip-host.c
F: drivers/soc/microchip/
+F: drivers/spi/spi-microchip-core.c
F: include/soc/microchip/mpfs.h
RNBD BLOCK DRIVERS
VERSION = 5
PATCHLEVEL = 19
SUBLEVEL = 0
-EXTRAVERSION = -rc8
+EXTRAVERSION =
NAME = Superb Owl
# *DOCUMENTATION*
config TRACE_IRQFLAGS_SUPPORT
bool
+config TRACE_IRQFLAGS_NMI_SUPPORT
+ bool
+
#
# An arch should select this if it provides all these things:
#
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+ irq_data_update_affinity(data, cpumask_of(cpu));
chip->irq_set_affinity(data, cpumask_of(cpu), false);
return 0;
}
flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
}
-void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- /*
- * We use only one NOP type (1x, 4 byte) in arch_static_branch, so
- * there's no need to patch an identical NOP over the top of it here.
- * The generic code calls 'arch_jump_label_transform' if the NOP needs
- * to be replaced by a branch, so 'arch_jump_label_transform_static' is
- * never called with type other than JUMP_LABEL_NOP.
- */
- BUG_ON(type != JUMP_LABEL_NOP);
-}
-
#ifdef CONFIG_ARC_DBG_JUMP_LABEL
#define SELFTEST_MSG "ARC: instruction generation self-test: "
config ARCH_FOOTBRIDGE
bool "FootBridge"
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS
select CPU_SA110
select FOOTBRIDGE
select NEED_MACH_MEMORY_H
bool "RiscPC"
depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
config ARCH_SA1100
bool "SA1100-based"
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS
select ARCH_MTD_XIP
select ARCH_SPARSEMEM_ENABLE
select CLKSRC_MMIO
source "arch/arm/mach-stm32/Kconfig"
+source "arch/arm/mach-sunplus/Kconfig"
+
source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
Include support for flattened device tree machine descriptions.
config ATAGS
- bool "Support for the traditional ATAGS boot data passing" if USE_OF
+ bool "Support for the traditional ATAGS boot data passing"
default y
help
This is the traditional way of passing data to the kernel at boot
time. If you are solely relying on the flattened device tree (or
the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
- to remove ATAGS support from your kernel binary. If unsure,
- leave this to y.
+ to remove ATAGS support from your kernel binary.
+
+config UNUSED_BOARD_FILES
+ bool "Board support for machines without known users"
+ depends on ATAGS
+ help
+ Most ATAGS based board files are completely unused and are
+ scheduled for removal in early 2023, and left out of kernels
+ by default now. If you are using a board file that is marked
+ as unused, turn on this option to build support into the kernel.
+
+ To keep support for your individual board from being removed,
+ send a reply to the email discussion at
+ https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
config DEPRECATED_PARAM_STRUCT
bool "Provide old way to pass kernel parameters"
config DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART"
- depends on ARCH_BCM_63XX
+ depends on ARCH_BCMBCA
config DEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"
machine-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
machine-$(CONFIG_ARCH_STM32) += stm32
+machine-$(CONFIG_ARCH_SUNPLUS) += sunplus
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U8500) += ux500
at91-vinco.dtb
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+ sunplus-sp7021-demo-v3.dtb
dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm47094-phicomm-k3.dtb \
+ bcm53015-meraki-mr26.dtb \
bcm53016-meraki-mr32.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
bcm911360_entphn.dtb \
bcm911360k.dtb \
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm947622.dtb
+ bcm947622.dtb \
+ bcm963138.dtb \
+ bcm963138dvt.dtb \
+ bcm963148.dtb \
+ bcm963178.dtb \
+ bcm96756.dtb \
+ bcm96846.dtb \
+ bcm96855.dtb \
+ bcm96878.dtb
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apalis-ixora-v1.1.dtb \
+ imx6q-apalis-ixora-v1.2.dtb \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-aster.dtb \
imx7d-colibri-emmc-aster.dtb \
+ imx7d-colibri-emmc-iris.dtb \
+ imx7d-colibri-emmc-iris-v2.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
+ imx7d-colibri-iris.dtb \
+ imx7d-colibri-iris-v2.dtb \
imx7d-flex-concentrator.dtb \
imx7d-flex-concentrator-mfg.dtb \
imx7d-mba7.dtb \
imx7d-zii-rpu2.dtb \
imx7s-colibri-aster.dtb \
imx7s-colibri-eval-v3.dtb \
+ imx7s-colibri-iris.dtb \
+ imx7s-colibri-iris-v2.dtb \
imx7s-mba7.dtb \
imx7s-warp.dtb
dtb-$(CONFIG_SOC_IMX7ULP) += \
dtb-$(CONFIG_SOC_IMXRT) += \
imxrt1050-evk.dtb
dtb-$(CONFIG_SOC_LAN966) += \
- lan966x-pcb8291.dtb \
lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
- lan966x-kontron-kswitch-d10-mmt-8g.dtb
+ lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+ lan966x-pcb8291.dtb \
+ lan966x-pcb8309.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-iot.dtb \
ls1021a-moxa-uc-8410a.dtb \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
- socfpga_arria10_mercury_aa1.dtb \
+ socfpga_arria10_chameleonv3.dtb \
socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
stm32mp151a-prtt1c.dtb \
stm32mp151a-prtt1s.dtb \
stm32mp153c-dhcom-drc02.dtb \
+ stm32mp153c-dhcor-drc-compact.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
stm32mp157a-dk1.dtb \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-ampere-mtjade.dtb \
- aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
reg = <0x0 0xfbc00000 0x0 0x100000>;
interrupt-map-mask = <0xf800 0 0 7>;
/* Add legacy interrupts for SATA devices only */
- interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
+ interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
<0x4800 0 0 1 &gic 0 44 4>;
/* 32 bit non prefetchable memory space */
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- startup-delay-us= <70000>;
+ startup-delay-us = <70000>;
/* WL_EN */
gpio = <&gpio3 9 0>;
"NC",
"NC";
};
+
+&baseboard_eeprom {
+ vcc-supply = <&ldo4_reg>;
+};
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- startup-delay-us= <70000>;
+ startup-delay-us = <70000>;
/* WL_EN */
gpio = <&gpio3 9 0>;
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- startup-delay-us= <70000>;
+ startup-delay-us = <70000>;
/* WL_EN */
gpio = <&gpio0 26 0>;
tlv320aic23: codec@1a {
compatible = "ti,tlv320aic23";
reg = <0x1a>;
- #sound-dai-cells= <0>;
+ #sound-dai-cells = <0>;
status = "okay";
};
};
tx-num-evt = <1>;
rx-num-evt = <1>;
- #sound-dai-cells= <0>;
+ #sound-dai-cells = <0>;
status = "okay";
};
0x0201006c>; /* DOWN */
};
- gpio_keys: volume_keys0 {
+ gpio_keys: volume-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- switch9 {
+ switch-9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch10 {
+ switch-10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&guardian_button_pins>;
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
select-button {
label = "guardian-select-button";
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button@0 {
+ button-0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button@0 {
+ button-0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&user_buttons_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_buttons_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- button1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- buttons2 {
+ button-2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- startup-delay-us= <100000>;
+ startup-delay-us = <100000>;
};
};
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- back_button {
+ back-button {
label = "Back Button";
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
wakeup-source;
};
- front_button {
+ front-button {
label = "Front Button";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
compatible = "gpio-keys-polled";
poll-interval = <100>;
- record {
+ key-record {
label = "Record";
/* linux,code = <BTN_0>; */
gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
};
- play {
+ key-play {
label = "Play";
linux,code = <KEY_PLAY>;
gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
};
- Stop {
+ key-stop {
label = "Stop";
linux,code = <KEY_STOP>;
gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
};
- fwd {
+ key-fwd {
label = "FWD";
linux,code = <KEY_FASTFORWARD>;
gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
};
- rwd {
+ key-rwd {
label = "RWD";
linux,code = <KEY_REWIND>;
gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
};
- shift {
+ key-shift {
label = "Shift";
linux,code = <KEY_LEFTSHIFT>;
gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
};
- Mode {
+ key-mode {
label = "Mode";
linux,code = <BTN_MODE>;
gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
};
- Menu {
+ key-menu {
label = "Menu";
linux,code = <KEY_MENU>;
gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
};
- Up {
+ key-up {
label = "Up";
linux,code = <KEY_UP>;
gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
};
- Down {
+ key-down {
label = "Down";
linux,code = <KEY_DOWN>;
gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
tlv320aic23_1: codec@1a {
compatible = "ti,tlv320aic23";
reg = <0x1a>;
- #sound-dai-cells= <0>;
+ #sound-dai-cells = <0>;
status = "okay";
};
tlv320aic23_2: codec@1b {
compatible = "ti,tlv320aic23";
reg = <0x1b>;
- #sound-dai-cells= <0>;
+ #sound-dai-cells = <0>;
status = "okay";
};
};
tlv320aic23_3: codec@1a {
compatible = "ti,tlv320aic23";
reg = <0x1a>;
- #sound-dai-cells= <0>;
+ #sound-dai-cells = <0>;
status = "okay";
};
compatible = "gpio-keys-polled";
poll-interval = <100>;
- user_pb {
+ button-user {
label = "User Push Button";
linux,code = <BTN_0>;
gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
};
- user_sw_1 {
+ switch-1 {
label = "User Switch 1";
linux,code = <BTN_1>;
gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
};
- user_sw_2 {
+ switch-2 {
label = "User Switch 2";
linux,code = <BTN_2>;
gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
};
- user_sw_3 {
+ switch-3 {
label = "User Switch 3";
linux,code = <BTN_3>;
gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
};
- user_sw_4 {
+ switch-4 {
label = "User Switch 4";
linux,code = <BTN_4>;
gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
};
- user_sw_5 {
+ switch-5 {
label = "User Switch 5";
linux,code = <BTN_5>;
gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
};
- user_sw_6 {
+ switch-6 {
label = "User Switch 6";
linux,code = <BTN_6>;
gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
};
- user_sw_7 {
+ switch-7 {
label = "User Switch 7";
linux,code = <BTN_7>;
gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
};
- user_sw_8 {
+ switch-8 {
label = "User Switch 8";
linux,code = <BTN_8>;
gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
u48: pca9575@22 {
compatible = "nxp,pca9575";
- reg=<0x22>;
+ reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
u59: pca9575@23 {
compatible = "nxp,pca9575";
- reg=<0x23>;
+ reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
vin-supply = <&v1_5dreg>;
};
- gpio_keys: gpio_keys {
+ gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- switch0 {
+ switch-0 {
label = "power-button";
linux,code = <KEY_POWER>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
adc {
#io-channel-cells = <1>;
- compatible ="ti,am4372-adc";
+ compatible = "ti,am4372-adc";
};
};
};
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- keyswitch_in {
+ key-switch-in {
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
wakeup-source;
};
- error_in {
+ key-error-in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
wakeup-source;
};
- btn {
+ key-s {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- usb1 {
+ button-usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ button-usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button {
label = "Software Button";
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- backup {
+ button-backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button {
+ button-usb {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&front_button_pins>;
pinctrl-names = "default";
- factory_default {
+ key-factory-default {
label = "Factory Default";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
label = "Rear Button";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,can-disable;
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
label = "Front Button";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,can-disable;
pinctrl-0 = <&gpio_keys_pins>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
reg = <0x2b>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "okay";
/*
* LEDs are controlled by MCU (STM32F0) at
* address 0x2b.
*
- * The driver does not support HW control mode
- * for the LEDs yet. Disable the LEDs for now.
- *
- * Also LED functions are not stable yet:
+ * LED functions are not stable yet:
* - there are 3 LEDs connected via MCU to PCIe
* ports. One of these ports supports mSATA.
* There is no mSATA nor PCIe function.
* B. Again there is no such function defined.
* For now we use LED_FUNCTION_INDICATOR
*/
- status = "disabled";
multi-led@0 {
reg = <0x0>;
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
- marvell,reg-init = <3 18 0 0x4985>;
+ marvell,reg-init = <3 18 0 0x4985>,
+ <3 16 0xfff0 0x0001>;
/* irq is connected to &pcawan pin 7 */
};
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- init {
+ button-init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
/ {
model = "AST2500 EVB";
- compatible = "aspeed,ast2500";
+ compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
aliases {
serial4 = &uart5;
/ {
model = "AST2600 A1 EVB";
+ compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
/delete-node/regulator-vcc-sdhci0;
/delete-node/regulator-vcc-sdhci1;
/ {
model = "AST2600 EVB";
- compatible = "aspeed,ast2600";
+ compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
aliases {
serial4 = &uart5;
gpio-keys {
compatible = "gpio-keys";
- shutdown_ack {
+ event-shutdown-ack {
label = "SHUTDOWN_ACK";
gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 2)>;
};
- reboot_ack {
+ event-reboot-ack {
label = "REBOOT_ACK";
gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 3)>;
};
- S0_overtemp {
+ event-s0-overtemp {
label = "S0_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 3)>;
};
- S0_hightemp {
+ event-s0-hightemp {
label = "S0_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 0)>;
};
- S0_cpu_fault {
+ event-s0-cpu-fault {
label = "S0_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(J, 1)>;
};
- S0_scp_auth_fail {
+ event-s0-scp-auth-fail {
label = "S0_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- S1_scp_auth_fail {
+ event-s1-scp-auth-fail {
label = "S1_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 5)>;
};
- S1_overtemp {
+ event-s1-overtemp {
label = "S1_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 6)>;
};
- S1_hightemp {
+ event-s1-hightemp {
label = "S1_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(AB, 0)>;
};
- S1_cpu_fault {
+ event-s1-cpu-fault {
label = "S1_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(Z, 1)>;
};
- id_button {
+ event-id {
label = "ID_BUTTON";
gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Q, 5)>;
};
- psu1_vin_good {
+ event-psu1-vin-good {
label = "PSU1_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 4)>;
};
- psu2_vin_good {
+ event-psu2-vin-good {
label = "PSU2_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 5)>;
};
- psu1_present {
+ event-psu1-present {
label = "PSU1_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
};
- psu2_present {
+ event-psu2-present {
label = "PSU2_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 1)>;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
- model = "Qualcomm Centriq 2400 REP AST2520";
- compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
-
- chosen {
- stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlycon";
- };
-
- memory@80000000 {
- reg = <0x80000000 0x40000000>;
- };
-
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
- <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
- };
-
- iio-hwmon-battery {
- compatible = "iio-hwmon";
- io-channels = <&adc 7>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- uid_led {
- label = "UID_LED";
- gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
- };
-
- ras_error_led {
- label = "RAS_ERROR_LED";
- gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
- };
-
- system_fault {
- label = "System_fault";
- gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&fmc {
- status = "okay";
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
-#include "openbmc-flash-layout.dtsi"
- };
-};
-
-&spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1_default>;
- flash@0 {
- status = "okay";
- };
-};
-
-&spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi2ck_default
- &pinctrl_spi2miso_default
- &pinctrl_spi2mosi_default
- &pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
- current-speed = <115200>;
-};
-
-&uart5 {
- status = "okay";
-};
-
-&mac0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- tmp421@1e {
- compatible = "ti,tmp421";
- reg = <0x1e>;
- };
- tmp421@2a {
- compatible = "ti,tmp421";
- reg = <0x2a>;
- };
- tmp421@4e {
- compatible = "ti,tmp421";
- reg = <0x4e>;
- };
- tmp421@1c {
- compatible = "ti,tmp421";
- reg = <0x1c>;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-
- tmp421@1d {
- compatible = "ti,tmp421";
- reg = <0x1d>;
- };
- tmp421@1f {
- compatible = "ti,tmp421";
- reg = <0x1f>;
- };
- tmp421@4d {
- compatible = "ti,tmp421";
- reg = <0x4d>;
- };
- tmp421@4f {
- compatible = "ti,tmp421";
- reg = <0x4f>;
- };
- nvt210@4c {
- compatible = "nvt210";
- reg = <0x4c>;
- };
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- pagesize = <128>;
- };
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-
- pca9641@70 {
- compatible = "nxp,pca9641";
- reg = <0x70>;
- i2c-arb {
- #address-cells = <1>;
- #size-cells = <0>;
- tmp421@1d {
- compatible = "tmp421";
- reg = <0x1d>;
- };
- adm1278@12 {
- compatible = "adi,adm1278";
- reg = <0x12>;
- Rsense = <500>;
- };
- eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- ds1100@58 {
- compatible = "ds1100";
- reg = <0x58>;
- };
- };
- };
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&vuart {
- status = "okay";
-};
-
-&gfx {
- status = "okay";
-};
-
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
- pin_gpio_c7 {
- gpio-hog;
- gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
- output;
- line-name = "BIOS_SPI_MUX_S";
- };
-};
gpio-keys {
compatible = "gpio-keys";
- burn-in-signal {
+ event-burn-in-signal {
label = "burn-in";
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 5)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- rear-riser1-presence {
+ event-rear-riser1-presence {
label = "rear-riser1-presence";
gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- alrt-pvddq-cpu0 {
+ event-alrt-pvddq-cpu0 {
label = "alrt-pvddq-cpu0";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- rear-riser0-presence {
+ event-rear-riser0-presence {
label = "rear-riser0-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fault-pvddq-cpu0 {
+ event-fault-pvddq-cpu0 {
label = "fault-pvddq-cpu0";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- alrt-pvddq-cpu1 {
+ event-alrt-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fault-pvddq-cpu1 {
+ event-fault-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fault-pvccin-cpu1 {
+ event-fault-pvccin-cpu1 {
label = "fault-pvccin-cpuq";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- bmc-rom0-wp {
+ event-bmc-rom0-wp {
label = "bmc-rom0-wp";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- bmc-rom1-wp {
+ event-bmc-rom1-wp {
label = "bmc-rom1-wp";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- front-bp1-presence {
+ event-front-bp1-presence {
label = "front-bp1-presence";
gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
linux,code = <16>;
};
- rear-bp-presence {
+ event-rear-bp-presence {
label = "rear-bp-presence";
gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
linux,code = <17>;
};
- fault-pvccin-cpu0 {
+ event-fault-pvccin-cpu0 {
label = "fault-pvccin-cpu0";
gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
linux,code = <18>;
};
- alrt-p1v05-pvcc {
+ event-alrt-p1v05-pvcc {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
linux,code = <19>;
};
- fault-p1v05-pvccio {
+ event-fault-p1v05-pvccio {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
linux,code = <20>;
};
- alrt-p1v8-pvccio {
+ event-alrt-p1v8-pvccio {
label = "alrt-p1v8-pvccio";
gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
linux,code = <21>;
};
- fault-p1v8-pvccio {
+ event-fault-p1v8-pvccio {
label = "fault-p1v8-pvccio";
gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
linux,code = <22>;
};
- front-bp0-presence {
+ event-front-bp0-presence {
label = "front-bp0-presence";
gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
linux,code = <23>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 3)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 0)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan6-presence {
+ event-fan6-presence {
label = "fan6-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan7-presence {
+ event-fan7-presence {
label = "fan7-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <8>;
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 5)>;
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
};
- oppanel-presence {
+ event-oppanel-presence {
label = "oppanel-presence";
gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(A, 7)>;
};
- opencapi-riser-presence {
+ event-opencapi-riser-presence {
label = "opencapi-riser-presence";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- scm0-presence {
+ event-scm0-presence {
label = "scm0-presence";
gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- scm1-presence {
+ event-scm1-presence {
label = "scm1-presence";
gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- cpu0vrm-presence {
+ event-cpu0vrm-presence {
label = "cpu0vrm-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- cpu1vrm-presence {
+ event-cpu1vrm-presence {
label = "cpu1vrm-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fanboost-presence {
+ event-fanboost-presence {
label = "fanboost-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
gpio-keys {
compatible = "gpio-keys";
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 5)>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
gpio-keys {
compatible = "gpio-keys";
- button_checkstop {
+ event-checkstop {
label = "checkstop";
linux,code = <74>;
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
};
- button_identify {
+ event-identify {
label = "identify";
linux,code = <152>;
gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 7)>;
};
- pcie-e2b-present{
+ event-pcie-e2b-present{
label = "pcie-e2b-present";
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 7)>;
leds {
compatible = "gpio-leds";
postcode0 {
- label="BMC_UP";
+ label = "BMC_UP";
gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
default-state = "on";
};
postcode1 {
- label="BMC_HB";
+ label = "BMC_HB";
gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
postcode2 {
- label="FAULT";
+ label = "FAULT";
gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
};
// postcode3-7 are GPIOH3-H7
compatible = "gpio-leds";
BMC_HEARTBEAT_N {
- label="BMC_HEARTBEAT_N";
+ label = "BMC_HEARTBEAT_N";
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
BMC_LED_STATUS_AMBER_N {
- label="BMC_LED_STATUS_AMBER_N";
+ label = "BMC_LED_STATUS_AMBER_N";
gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
default-state = "off";
};
FM_ID_LED_N {
- label="FM_ID_LED_N";
+ label = "FM_ID_LED_N";
gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn {
+ button {
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
model = "Laird Workgroup Bridge 50N - Project Gatwick";
compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- prog {
+ button-prog {
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default" , "default", "default",
"default", "default" ;
&pinctrl_pio_zbe_rst>;
pinctrl-4 = <&pinctrl_pio_input>;
- SW1 {
+ switch-1 {
label = "SW1";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
wakeup-source;
};
- SW2 {
+ switch-2 {
label = "SW2";
gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- SW3 {
+ switch-3 {
label = "SW3";
gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- SW7 {
+ switch-7 {
label = "SW7";
gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
linux,code = <0x107>;
wakeup-source;
};
- SW8 {
+ switch-8 {
label = "SW8";
gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
linux,code = <0x108>;
&pioA {
pinctrl_key_gpio_default: key_gpio_default {
- pinmux
= <PIN_PA22__GPIO>,
+ pinmux
= <PIN_PA22__GPIO>,
<PIN_PA24__GPIO>,
<PIN_PA26__GPIO>,
<PIN_PA29__GPIO>,
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- prog {
+ key-prog {
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ key-reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "Wakeup";
linux,code = <10>;
wakeup-source;
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- user_pb {
+ button-user {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
- sw1 {
+ button-1 {
label = "SW1";
gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
- linux,code=<KEY_PROG1>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
aliases {
- i2c0 = &i2c0;
+ i2c0 = &i2c0;
};
clocks {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
ethernet-phy@7 {
serial0 = &uart1; /* DBGU */
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
- i2c1 = &i2c1;
- i2c2 = &i2c3;
+ i2c1 = &i2c1;
+ i2c2 = &i2c3;
};
chosen {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- pb4 {
+ button {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
&macb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
ethernet-phy@0 {
serial1 = &uart6; /* BT */
serial2 = &uart5; /* mikro BUS 2 */
serial3 = &uart3; /* mikro BUS 1 */
- i2c1 = &i2c1;
+ i2c1 = &i2c1;
};
chosen {
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
- sw4 {
+ button-1 {
label = "USER BUTTON";
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
serial1 = &uart1; /* mikro BUS 3 */
serial3 = &uart3; /* mikro BUS 2 */
serial5 = &uart7; /* flx2 */
- i2c0 = &i2c0;
- i2c1 = &i2c1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
};
chosen {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
- sw4 {
+ button-1 {
label = "USER_PB1";
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
aliases {
serial0 = &uart0; /* DBGU */
- i2c0 = &i2c0; /* mikroBUS 1 */
- i2c1 = &i2c1; /* XPRO EXT1 */
- i2c2 = &i2c2;
+ i2c0 = &i2c0; /* mikroBUS 1 */
+ i2c1 = &i2c1; /* XPRO EXT1 */
+ i2c2 = &i2c2;
};
chosen {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
status = "okay";
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button-1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
status = "okay";
regulator-state-mem {
regulator-on-in-suspend;
- regulator-suspend-min-microvolt=<1400000>;
- regulator-suspend-max-microvolt=<1400000>;
+ regulator-suspend-min-microvolt = <1400000>;
+ regulator-suspend-max-microvolt = <1400000>;
regulator-changeable-in-suspend;
- regulator-mode
=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-mode
= <ACT8945A_REGULATOR_MODE_LOWPOWER>;
};
};
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- bp3 {
+ button {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PROG1>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- irqbtn@18 {
- reg = <18>;
+ button {
label = "IRQBTN";
linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- btn0@10 {
- reg = <10>;
+ button-0 {
label = "BTNESC";
linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- irqbtn@31 {
- reg = <31>;
+ button-1 {
label = "IRQBTN";
linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
clock-names = "slow_xtal", "main_xtal";
};
- rstc@fffffd00 {
+ reset-controller@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
clock-names = "slow_xtal", "main_xtal";
};
- rstc@fffffd00 {
+ reset-controller@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&slow_xtal>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- button_0 {
+ button-0 {
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
wakeup-source;
};
- button_1 {
+ button-1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
wakeup-source;
};
- button_2 {
+ button-2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
wakeup-source;
};
- button_3 {
+ button-3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
clock-names = "t0_clk", "slow_clk";
};
- rstc@fffffd00 {
+ reset-controller@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&slow_xtal>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
gpio-keys {
compatible = "gpio-keys";
- user_btn1 {
+ button {
label = "USER_BTN1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
clock-names = "slow_clk", "main_xtal";
};
- rstc@fffffd00 {
+ reset-controller@fffffd00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&clk32k>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left {
+ button-left {
label = "Joystick Left";
gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>;
};
- right {
+ button-right {
label = "Joystick Right";
gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};
- up {
+ button-up {
label = "Joystick Up";
gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};
- down {
+ button-down {
label = "Joystick Down";
gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>;
};
- enter {
+ button-enter {
label = "Joystick Press";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
};
- rstc@fffffe00 {
+ reset-controller@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32k>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- enter {
+ button-enter {
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
clock-names = "slow_clk", "main_xtal";
};
- rstc@fffffd00 {
+ reset-controller@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&clk32k>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
clock-names = "slow_clk", "main_xtal";
};
- reset_controller: rstc@fffffe00 {
+ reset_controller: reset-controller@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32k>;
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x00>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x01>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x02>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x03>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x100>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x101>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x102>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x103>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x200>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x201>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x202>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x203>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x300>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x301>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x302>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x303>;
- clock-frequency= <1400000000>;
+ clock-frequency = <1400000000>;
cpu-release-addr = <0>; // Fixed by the boot loader
};
};
};
};
+&v3d {
+ clocks = <&firmware_clocks 5>;
+};
+
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
};
pm: watchdog@7e100000 {
- compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+ compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>,
<0x7ec11000 0x20>;
+ reg-names = "pm", "asb", "rpivid_asb";
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
#size-cells = <0x0>;
};
};
+
+ v3d: gpu@7ec00000 {
+ compatible = "brcm,2711-v3d";
+ reg = <0x0 0x7ec00000 0x4000>,
+ <0x0 0x7ec04000 0x4000>;
+ reg-names = "hub", "core0";
+
+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+ resets = <&pm BCM2835_RESET_V3D>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
};
i2c@3e016000 {
- status="okay";
+ status = "okay";
clock-frequency = <400000>;
};
i2c@3e017000 {
- status="okay";
+ status = "okay";
clock-frequency = <400000>;
};
i2c@3e018000 {
- status="okay";
+ status = "okay";
clock-frequency = <400000>;
};
i2c@3500d000 {
- status="okay";
+ status = "okay";
clock-frequency = <100000>;
pmu: pmu@8 {
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>;
+ reg-names = "pm", "asb";
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
trips {
cpu-crit {
- temperature = <90000>;
- hysteresis = <0>;
- type = "critical";
+ temperature = <90000>;
+ hysteresis = <0>;
+ type = "critical";
};
};
clocks = <&clocks BCM2835_CLOCK_VPU>,
<&clocks BCM2835_CLOCK_DPI>;
clock-names = "core", "pixel";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
gpio-keys {
compatible = "gpio-keys";
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- brightness {
+ button-brightness {
label = "Backlight";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- aoss {
+ button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
- mode {
+ button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
- sw_ap {
+ button-sw-ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
- eject {
+ button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- aoss {
+ button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
- mode {
+ button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
- sw_ap {
+ button-sw-ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
- eject {
+ button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- aoss {
+ button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
/* Switch device mode? */
- mode {
+ button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
- eject {
+ button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- power {
+ button-power {
label = "Power";
linux,code = <KEY_POWER>;
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
- aoss {
+ button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
- mode {
+ button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
- sw_ap {
+ button-sw-ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
- eject {
+ button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
- brightness {
+ button-brightness {
label = "Backlight";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- wifi {
+ button-wifi {
label = "Wi-Fi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
- led {
+ button-led {
label = "Backlight";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
/* Switch: router / extender */
- extender {
+ button-extender {
label = "Extender";
linux,code = <BTN_0>;
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- brightness {
+ button-brightness {
label = "Backlight";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- rfkill {
+ button-rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
CA7_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
CA7_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
L2_0: l2-cache0 {
compatible = "cache";
};
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
psci {
compatible = "arm,psci-0.2";
method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
};
axi@81000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x81000000 0x818000>;
+ ranges = <0 0x81000000 0x8000>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+ model = "Meraki MR26";
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ key-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ clock-frequency = <50000000>;
+ /delete-property/ clocks;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "disabled";
+};
+&gmac2 {
+ status = "disabled";
+};
+&gmac3 {
+ status = "disabled";
+};
+
+&nandcs {
+ nand-ecc-algo = "hw";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "u-boot-env";
+ reg = <0x200000 0x200000>;
+ /* empty */
+ };
+
+ partition@400000 {
+ label = "u-boot-backup";
+ reg = <0x400000 0x200000>;
+ /* empty */
+ };
+
+ partition@600000 {
+ label = "u-boot-env-backup";
+ reg = <0x600000 0x200000>;
+ /* empty */
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x7780000>;
+ };
+ };
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "poe";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+
+ fixed-link {
+ speed = <1000>;
+ duplex-full;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_i2c>;
+
+ clock-frequency = <100000>;
+
+ ina219@40 {
+ compatible = "ti,ina219"; /* PoE power */
+ reg = <0x40>;
+ shunt-resistor = <60000>; /* = 60 mOhms */
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ pagesize = <32>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* it's empty */
+ };
+};
+
+&thermal {
+ status = "disabled";
+ /* does not work, reads 418 degree Celsius */
+};
keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
trips {
cpu-crit {
- temperature = <125000>;
- hysteresis = <0>;
- type = "critical";
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
};
};
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "brcm,bcm63138";
- model = "Broadcom BCM63138 DSL SoC";
+ compatible = "brcm,bcm63138", "brcm,bcmbca";
+ model = "Broadcom BCM963138 Reference Board";
interrupt-parent = <&gic>;
aliases {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm63148", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ B15_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b15";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B15_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b15";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B15_0>, <&B15_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@80030000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80030000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfffe8000 0x8000>;
+
+ uart0: serial@600 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x600 0x20>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm63178", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_off = <1>;
+ cpu_on = <2>;
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x4000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6756", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>, <&CA7_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6846", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_off = <1>;
+ cpu_on = <2>;
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x4000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x1b>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6855", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6878", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- hook {
+ button-hook {
label = "HOOK";
linux,code = <KEY_O>;
gpios = <&gpio_asiu 48 0>;
gpio-keys {
compatible = "gpio-keys";
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
};
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
autorepeat;
poll-interval = <20>;
- reset {
+ button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
autorepeat;
poll-interval = <20>;
- reset {
+ button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+ model = "Broadcom BCM963138 Reference Board";
+ compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serial0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
#include "bcm63138.dtsi"
/ {
- compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+ compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
model = "Broadcom BCM963138DVT";
chosen {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+ model = "Broadcom BCM963148 Reference Board";
+ compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+ model = "Broadcom BCM963178 Reference Board";
+ compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+ model = "Broadcom BCM96756 Reference Board";
+ compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+ model = "Broadcom BCM96846 Reference Board";
+ compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+ model = "Broadcom BCM96855 Reference Board";
+ compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+ model = "Broadcom BCM96878 Reference Board";
+ compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
panel-info {
- ac-bias = <255>;
- ac-bias-intrpt = <0>;
- dma-burst-sz = <16>;
- bpp = <16>;
- fdd = <0x80>;
- sync-edge = <0>;
- sync-ctrl = <1>;
- raster-order = <0>;
- fifo-th = <0>;
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
};
display-timings {
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
- reg = <0x0 0x8000>;
+ reg = <0x0 0x8000>;
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
- reg = <0x8000 0x400>;
+ reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
- reg = <0x8400 0x400>;
+ reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 2>;
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
- reg = <0x230000 0x8000>;
+ reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
- reg = <0x238000 0x400>;
+ reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc1 21>;
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
- reg = <0x201000 0x1000
+ reg = <0x201000 0x1000
0x202000 0x1000
0x204000 0x4000>;
reg-names = "controller",
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,mt29f2g16aadwp";
+ linux,mtd-name = "micron,mt29f2g16aadwp";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
nand@0,0 {
compatible = "ti,omap2-nand";
- linux,mtd-name= "micron,mt29f2g16aadwp";
+ linux,mtd-name = "micron,mt29f2g16aadwp";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,mt29f2g16aadwp";
+ linux,mtd-name = "micron,mt29f2g16aadwp";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
clocks = <&dpll_gmac_x2_ck>;
ti,max-div = <63>;
reg = <0x03fc>;
- ti,bit-shift=<20>;
- ti,latch-bit=<26>;
+ ti,bit-shift = <20>;
+ ti,latch-bit = <26>;
assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
assigned-clock-rates = <80000000>;
};
clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
reg = <0x3fc>;
ti,bit-shift = <29>;
- ti,latch-bit=<26>;
+ ti,latch-bit = <26>;
assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
wakeup-source;
};
- pageup {
+ key-pageup {
label = "PageUp";
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEUP>;
};
- pagedown {
+ key-pagedown {
label = "PageDown";
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEDOWN>;
};
psci {
- compatible = "arm,psci";
- method = "smc";
- cpu_suspend = <0x84000002>;
- cpu_off = <0x84000004>;
- cpu_on = <0x84000006>;
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000002>;
+ cpu_off = <0x84000004>;
+ cpu_on = <0x84000006>;
};
soc {
&gpio1 {
status = "okay";
};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
/ {
interrupt-parent = <&gic>;
};
};
+ scu: system-controller@1fa20000 {
+ compatible = "airoha,en7523-scu";
+ reg = <0x1fa20000 0x400>,
+ <0x1fb00000 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@9000000 {
compatible = "arm,gic-v3";
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
};
+
+ pcie0: pcie@1fa91000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa91000 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1fa92000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa92000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE 0
+#define EXYNOS_PIN_PULL_DOWN 1
+#define EXYNOS_PIN_PULL_UP 3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0 0
+#define EXYNOS_PIN_PDN_OUT1 1
+#define EXYNOS_PIN_PDN_INPUT 2
+#define EXYNOS_PIN_PDN_PREV 3
+
+/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
+#define EXYNOS4_PIN_DRV_LV1 0
+#define EXYNOS4_PIN_DRV_LV2 2
+#define EXYNOS4_PIN_DRV_LV3 1
+#define EXYNOS4_PIN_DRV_LV4 3
+
+/* Drive strengths for Exynos5260 */
+#define EXYNOS5260_PIN_DRV_LV1 0
+#define EXYNOS5260_PIN_DRV_LV2 1
+#define EXYNOS5260_PIN_DRV_LV4 2
+#define EXYNOS5260_PIN_DRV_LV6 3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
+ * GPIO_HSI block)
+ */
+#define EXYNOS5420_PIN_DRV_LV1 0
+#define EXYNOS5420_PIN_DRV_LV2 1
+#define EXYNOS5420_PIN_DRV_LV3 2
+#define EXYNOS5420_PIN_DRV_LV4 3
+
+#define EXYNOS_PIN_FUNC_INPUT 0
+#define EXYNOS_PIN_FUNC_OUTPUT 1
+#define EXYNOS_PIN_FUNC_2 2
+#define EXYNOS_PIN_FUNC_3 3
+#define EXYNOS_PIN_FUNC_4 4
+#define EXYNOS_PIN_FUNC_5 5
+#define EXYNOS_PIN_FUNC_6 6
+#define EXYNOS_PIN_FUNC_EINT 0xf
+#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */
&pinctrl_1 {
bten: bten-pins {
- samsung,pins ="gpx1-7";
+ samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
#define PIN_IN(_pin, _pull, _drv) \
pin- ## _pin { \
status = "disabled";
};
- mshc_0: mshc@12510000 {
+ mshc_0: mmc@12510000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12510000 0x1000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mshc_1: mshc@12520000 {
+ mshc_1: mmc@12520000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12520000 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mshc_2: mshc@12530000 {
+ mshc_2: mmc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdhci_0: sdhci@12510000 {
+ sdhci_0: mmc@12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdhci_1: sdhci@12520000 {
+ sdhci_1: mmc@12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdhci_2: sdhci@12530000 {
+ sdhci_2: mmc@12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdhci_3: sdhci@12540000 {
+ sdhci_3: mmc@12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-keys {
compatible = "gpio-keys";
- vol-down {
+ key-vol-down {
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
label = "volume down";
debounce-interval = <10>;
};
- vol-up {
+ key-vol-up {
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "volume up";
debounce-interval = <10>;
};
- power {
+ key-power {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power";
wakeup-source;
};
- ok {
+ key-ok {
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_OK>;
label = "ok";
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
gpio-keys {
compatible = "gpio-keys";
- up {
+ key-up {
label = "Up";
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
wakeup-source;
};
- down {
+ key-down {
label = "Down";
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
wakeup-source;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
wakeup-source;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
wakeup-source;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
compatible = "gpio-leds";
status {
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
linux,default-trigger = "heartbeat";
};
};
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_0 {
gpa0: gpa0-gpio-bank {
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
- power-on-delay= <50>;
+ power-on-delay = <50>;
reset-delay = <100>;
init-delay = <100>;
flip-horizontal;
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "exynos4412-midas.dtsi"
/ {
pinctrl-1 = <&camera_flash_host>;
pinctrl-2 = <&camera_flash_isp>;
- flash-led {
- label = "flash";
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
led-max-microamp = <520833>;
flash-max-microamp = <1012500>;
flash-max-timeout-us = <1940000>;
vdd3-supply = <&lcd_vdd3_reg>;
vci-supply = <&ldo25_reg>;
reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
- power-on-delay= <50>;
+ power-on-delay = <50>;
reset-delay = <100>;
init-delay = <100>;
flip-horizontal;
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos4412-itop-scp-core.dtsi"
compatible = "gpio-leds";
led2 {
- label = "red:system";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
led3 {
label = "red:user";
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
gpio-keys {
compatible = "gpio-keys";
- home {
+ key-home {
label = "GPIO Key Home";
linux,code = <KEY_HOME>;
gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
};
- back {
+ key-back {
label = "GPIO Key Back";
linux,code = <KEY_BACK>;
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
};
- sleep {
+ key-sleep {
label = "GPIO Key Sleep";
linux,code = <KEY_POWER>;
gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
};
- vol-up {
+ key-vol-up {
label = "GPIO Key Vol+";
linux,code = <KEY_UP>;
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
};
- vol-down {
+ key-vol-down {
label = "GPIO Key Vol-";
linux,code = <KEY_DOWN>;
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
/dts-v1/;
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
/ {
compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "exynos4412-odroid-common.dtsi"
#include "exynos4412-prime.dtsi"
leds {
compatible = "gpio-leds";
led1 {
- label = "led1:heart";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "exynos4412-odroid-common.dtsi"
/ {
leds {
compatible = "gpio-leds";
led1 {
- label = "led1:heart";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led2 {
label = "led2:mmc0";
+ function = LED_FUNCTION_DISK_ACTIVITY;
gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "mmc0";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/samsung.h>
#include <dt-bindings/power/summit,smb347-charger.h>
+#include "exynos-pinctrl.h"
/ {
compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
regulator-always-on;
};
+ panel_vdd: voltage-regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_ENABLE";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable>;
+ gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
wlan_pwrseq: sdhci3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
monitored-battery = <&battery_cell>;
};
};
+
+ panel {
+ compatible = "samsung,ltl101al01";
+ pinctrl-0 = <&lvds_nshdn>;
+ pinctrl-names = "default";
+ power-supply = <&panel_vdd>;
+ enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_ep>;
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-0 = <&led_bl_reset>;
+ pinctrl-names = "default";
+ enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm 1 78770 0>;
+ brightness-levels = <0 48 128 255>;
+ num-interpolated-steps = <8>;
+ default-brightness-level = <12>;
+ };
};
&adc {
};
&fimd {
- pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-0 = <&lcd_clk &lcd_data24>;
pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
- display-timings {
- timing0 {
- clock-frequency = <66666666>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <18>;
- hback-porch = <36>;
- hsync-len = <16>;
- vback-porch = <16>;
- vfront-porch = <4>;
- vsync-len = <3>;
- hsync-active = <1>;
+ samsung,invert-vclk;
+
+ port@3 {
+ reg = <3>;
+
+ fimd_ep: endpoint {
+ remote-endpoint = <&lcd_ep>;
};
};
};
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
+ lcd_enable: lcd-enable-pins {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
/* 0 = CP, 1 = AP (serial output) */
};
+ led_bl_reset: led-bl-reset-pins {
+ samsung,pins = "gpm0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
tsp_rst: tsp-rst-pins {
samsung,pins = "gpm0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
+ lvds_nshdn: lvds-nshdn-pins {
+ samsung,pins = "gpm0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
tsp_irq: tsp-irq-pins {
samsung,pins = "gpm2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
assigned-clock-parents = <&clock CLK_XUSBXTI>;
};
+&pwm {
+ pinctrl-0 = <&pwm1_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <1>;
+ status = "okay";
+};
+
&rtc {
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
clock-names = "rtc", "rtc_src";
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
/dts-v1/;
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "FriendlyARM TINY4412 board based on Exynos4412";
led1 {
label = "led1";
+ function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "heartbeat";
led4 {
label = "led4";
+ function = LED_FUNCTION_DISK_ACTIVITY;
gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "mmc0";
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x10481000 0x1000>,
+ reg = <0x10481000 0x1000>,
<0x10482000 0x2000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
gpio-keys {
compatible = "gpio-keys";
- menu {
+ key-menu {
label = "SW-TACT2";
gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
wakeup-source;
};
- home {
+ key-home {
label = "SW-TACT3";
gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
wakeup-source;
};
- up {
+ key-up {
label = "SW-TACT4";
gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
wakeup-source;
};
- down {
+ key-down {
label = "SW-TACT5";
gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
wakeup-source;
};
- back {
+ key-back {
label = "SW-TACT6";
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
wakeup-source;
};
- wakeup {
+ key-wakeup {
label = "SW-TACT7";
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_0 {
gpa0: gpa0-gpio-bank {
pinctrl-names = "default";
pinctrl-0 = <&power_key_irq &lid_irq>;
- power {
+ power-key {
label = "Power";
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&power_key_irq>, <&lid_irq>;
- power {
+ power-key {
label = "Power";
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_0 {
gpa0: gpa0-gpio-bank {
* https://www.hardkernel.com
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_0 {
gpa0: gpa0-gpio-bank {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SW-TACT1";
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
pinctrl-names = "default";
pinctrl-0 = <&power_key_irq &lid_irq>;
- power {
+ power-key {
label = "Power";
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_0 {
gpy7: gpy7-gpio-bank {
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "exynos5422-odroid-core.dtsi"
/ {
compatible = "pwm-leds";
led-1 {
- label = "blue:heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
max-brightness = <255>;
*/
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5422-odroidxu3-common.dtsi"
compatible = "pwm-leds";
led-1 {
- label = "blue:heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
max-brightness = <255>;
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
led-controller-1 {
led-1 {
label = "green:mmc0";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_GREEN>;
pwms = <&pwm 1 2000000 0>;
pwm-names = "pwm1";
/*
};
led-2 {
- label = "blue:heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
max-brightness = <255>;
led-3 {
label = "red:microSD";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc1";
pinctrl-names = "default";
pinctrl-0 = <&power_key_irq &lid_irq>;
- power {
+ power-key {
label = "Power";
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
};
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&aitc>;
ranges;
- aipi@10000000 { /* AIPI1 */
+ aipi1: aipi@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- aipi@10020000 { /* AIPI2 */
+ aipi2: aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x68000000 0x100000>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0 0x1fffc000 0x4000>;
};
- bus@43f00000 { /* AIPS1 */
+ aips1: bus@43f00000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
- bus@50000000 { /* AIPS1 */
+ aips1: bus@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- bus@60000000 { /* AIPS2 */
+ aips2: bus@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_interrupt_fpga>;
interrupt-parent = <&gpio2>;
- interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
};
ports = <&ipu_di0>, <&ipu_di1>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
};
};
- bus@70000000 { /* AIPS1 */
+ aips1: bus@70000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- bus@80000000 { /* AIPS2 */
+ aips2: bus@80000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
clock-names = "core_clk", "mem_iface_clk";
};
- bus@50000000 { /* AIPS1 */
+ aips1: bus@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- bus@60000000 { /* AIPS2 */
+ aips2: bus@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc2046>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touchscreen>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
};
};
- soc {
+ soc: soc {
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
stdout-path = "serial0:115200n8";
};
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- wakeup {
- label = "Wake-Up";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di1_disp1>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- panel: panel {
- /*
- * edt,et057090dhu: EDT 5.7" LCD TFT
- * edt,et070080dh6: EDT 7.0" LCD TFT
- */
- compatible = "edt,et057090dhu";
- backlight = <&backlight>;
- power-supply = <®_3v3_sw>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
reg_pcie_switch: regulator-pcie-switch {
compatible = "regulator-fixed";
- regulator-name = "pcie_switch";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ enable-active-high;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "pcie_switch";
startup-delay-us = <100000>;
- enable-active-high;
status = "okay";
};
reg_3v3_sw: regulator-3v3-sw {
compatible = "regulator-fixed";
- regulator-name = "3.3V_SW";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3.3V_SW";
};
};
-&backlight {
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
- power-supply = <®_3v3_sw>;
- status = "okay";
-};
-
&can1 {
xceiver-supply = <®_3v3_sw>;
status = "okay";
status = "okay";
};
-&hdmi {
- status = "okay";
-};
-
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
status = "okay";
- /*
- * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
- * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
- */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
- status = "disabled";
- };
-
pcie-switch@58 {
compatible = "plx,pex8605";
reg = <0x58>;
status = "okay";
};
-&ipu1_di1_disp1 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
- status = "okay";
-};
-
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_moci>;
status = "okay";
};
-®_usb_otg_vbus {
+®_usb_host_vbus {
status = "okay";
};
-®_usb_host_vbus {
+®_usb_otg_vbus {
status = "okay";
};
/* MMC1 */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
- cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* SD1 */
&usdhc2 {
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
-
-&iomuxc {
- /*
- * Mux the Apalis GPIOs
- */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
- &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
- &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
- &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
- >;
-};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
+#include "imx6q-apalis-ixora-v1.2.dts"
/ {
model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
- compatible = "toradex,apalis_imx6q-ixora-v1.1",
- "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+ compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
"fsl,imx6q";
- aliases {
- i2c0 = &i2c1;
- i2c1 = &i2c3;
- i2c2 = &i2c2;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- wakeup {
- label = "Wake-Up";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di1_disp1>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
- panel: panel {
- /*
- * edt,et057090dhu: EDT 5.7" LCD TFT
- * edt,et070080dh6: EDT 7.0" LCD TFT
- */
- compatible = "edt,et057090dhu";
- backlight = <&backlight>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds_ixora>;
-
- led4-green {
- label = "LED_4_GREEN";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
-
- led4-red {
- label = "LED_4_RED";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
-
- led5-green {
- label = "LED_5_GREEN";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
-
- led5-red {
- label = "LED_5_RED";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
- };
};
-&backlight {
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
- status = "okay";
-};
+/delete-node/ &eeprom;
+/delete-node/ ®_3v3_vmmc;
+/delete-node/ ®_can1_supply;
+/delete-node/ ®_can2_supply;
&can1 {
- status = "okay";
+ /delete-property/ xceiver-supply;
};
&can2 {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
- status = "okay";
-
- /*
- * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
- * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
- */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
- status = "disabled";
- };
-
- /* M41T0M6 real time clock on carrier board */
- rtc_i2c: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
- status = "okay";
-};
-
-&ipu1_di1_disp1 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
- status = "okay";
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reset_moci>;
- /* active-high meaning opposite of regular PERST# active-low polarity */
- reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- reset-gpio-active-high;
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&pwm4 {
- status = "okay";
-};
-
-®_usb_otg_vbus {
- status = "okay";
-};
-
-®_usb_host_vbus {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&sound_spdif {
- status = "okay";
-};
-
-&spdif {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&uart5 {
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_host_vbus>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- status = "okay";
+ /delete-property/ xceiver-supply;
};
/* MMC1 */
&usdhc1 {
+ /delete-property/ cap-power-off-card;
+ /delete-property/ pinctrl-1;
+ /delete-property/ vmmc-supply;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
- cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- status = "okay";
-};
-
-&iomuxc {
- /*
- * Mux the Apalis GPIOs
- */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
- &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
- &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
- &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
- >;
-
- pinctrl_leds_ixora: ledsixoragrp {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
- MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- >;
- };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+ compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+ "fsl,imx6q";
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
+ i2c2 = &i2c2;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_ixora>;
+
+ led4-green {
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_GREEN";
+ };
+
+ led4-red {
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_RED";
+ };
+
+ led5-green {
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_GREEN";
+ };
+
+ led5-red {
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_RED";
+ };
+ };
+
+ reg_3v3_vmmc: regulator-3v3-vmmc {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3_vmmc";
+ startup-delay-us = <100>;
+ };
+
+ reg_can1_supply: regulator-can1-supply {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_can1_power>;
+ regulator-name = "can1_supply";
+ };
+
+ reg_can2_supply: regulator-can2-supply {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_can2_power>;
+ regulator-name = "can2_supply";
+ };
+};
+
+&can1 {
+ xceiver-supply = <®_can1_supply>;
+ status = "okay";
+};
+
+&can2 {
+ xceiver-supply = <®_can2_supply>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+ /*
+ * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+ * UART2 and UART3. If one wants to disable the transceiver force
+ * the GPIO to output-low, if one wants to control the transceiver
+ * from user space delete the hog node.
+ */
+ uart-2-4-on-x21-enable-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+ output-high;
+ };
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc_i2c: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
+ /* active-high meaning opposite of regular PERST# active-low polarity */
+ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+®_usb_host_vbus {
+ status = "okay";
+};
+
+®_usb_otg_vbus {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sound_spdif {
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+ bus-width = <4>;
+ cap-power-off-card;
+ vmmc-supply = <®_3v3_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_enable_can1_power: enablecan1powergrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ >;
+ };
+
+ pinctrl_enable_can2_power: enablecan2powergrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart24_forceoff: uart24forceoffgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds_ixora: ledsixoragrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_mmc_cd_sleep: mmccdslpgrp {
+ fsl,pins = <
+ /* MMC1 CD */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+ >;
+ };
+
+ pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000
+ >;
+ };
+};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
stdout-path = "serial0:115200n8";
};
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- wakeup {
- label = "Wake-Up";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di1_disp1>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- panel: panel {
- /*
- * edt,et057090dhu: EDT 5.7" LCD TFT
- * edt,et070080dh6: EDT 7.0" LCD TFT
- */
- compatible = "edt,et057090dhu";
- backlight = <&backlight>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
leds {
compatible = "gpio-leds";
-
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds_ixora>;
led4-green {
- label = "LED_4_GREEN";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_GREEN";
};
led4-red {
- label = "LED_4_RED";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_RED";
};
led5-green {
- label = "LED_5_GREEN";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_GREEN";
};
led5-red {
- label = "LED_5_RED";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_RED";
};
};
};
-&backlight {
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
- status = "okay";
-};
-
&can1 {
status = "okay";
};
status = "okay";
};
-&hdmi {
- status = "okay";
-};
-
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
status = "okay";
- /*
- * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
- * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
- */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
- status = "disabled";
- };
-
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
status = "okay";
};
-&ipu1_di1_disp1 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
- status = "okay";
-};
-
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_moci>;
status = "okay";
};
-®_usb_otg_vbus {
+®_usb_host_vbus {
status = "okay";
};
-®_usb_host_vbus {
+®_usb_otg_vbus {
status = "okay";
};
/* SD1 */
&usdhc2 {
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
&iomuxc {
- /* Mux the Apalis GPIOs */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
- &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
- &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
- &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
- >;
-
pinctrl_leds_ixora: ledsixoragrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
voltage-ranges = <3300 3300>;
vmmc-supply = <®_sw4>;
fsl,wp-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog1>;
fsl,ext-reset-output;
- timeout-sec=<10>;
+ timeout-sec = <10>;
status = "okay";
};
>;
};
};
+
+®_tft_vcom {
+ regulator-min-microvolt = <3160000>;
+ regulator-max-microvolt = <3160000>;
+ voltage-table = <3160000 73>;
+};
};
};
- soc {
+ soc: soc {
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- bus@2000000 { /* AIPS1 */
+ aips1: bus@2000000 { /* AIPS1 */
spba-bus@2000000 {
ecspi5: spi@2018000 {
#address-cells = <1>;
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Toradex Apalis iMX6Q/D Module";
backlight: backlight {
compatible = "pwm-backlight";
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
+ enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm4 0 5000000>;
- enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_module_3v3>;
+ pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+ status = "disabled";
+ };
+
+ clk_ov5640_osc: clk-ov5640-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ debounce-interval = <10>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di1_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel_dpi: panel-dpi {
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel_lvds: panel-lvds {
+ compatible = "panel-lvds";
+ backlight = <&backlight>;
+ status = "disabled";
+
+ port {
+ lvds_panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
};
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
- regulator-name = "+V3.3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3";
};
reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AUDIO";
- regulator-min-microvolt = <3300000>;
+ regulator-always-on;
regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_AUDIO";
+ };
+
+ reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "DOVDD/DVDD_1.8V";
+ /* Note: The CSI module uses on-board 3.3V_SW supply */
+ vin-supply = <®_module_3v3>;
+ };
+
+ reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+ compatible = "regulator-fixed";
regulator-always-on;
+ regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-name = "AVDD/AFVDD_2.8V";
+ /* Note: The CSI module uses on-board 3.3V_SW supply */
+ vin-supply = <®_module_3v3>;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_otg_vbus";
status = "disabled";
};
/* on module USB hub */
reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
- regulator-name = "usb_host_vbus_hub";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_host_vbus_hub";
startup-delay-us = <2000>;
- enable-active-high;
status = "okay";
};
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_host_vbus";
vin-supply = <®_usb_host_vbus_hub>;
status = "disabled";
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
- model = "imx6q-apalis-sgtl5000";
- ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
+ model = "imx6q-apalis-sgtl5000";
mux-ext-port = <4>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
};
sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-in;
spdif-out;
+ model = "imx-spdif";
status = "disabled";
};
};
status = "disabled";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
/* Apalis SPI1 */
&ecspi1 {
cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
status = "disabled";
};
+&gpio1 {
+ gpio-line-names = "MXM3_84",
+ "MXM3_4",
+ "MXM3_15/GPIO7",
+ "MXM3_96",
+ "MXM3_37",
+ "",
+ "MXM3_17/GPIO8",
+ "MXM3_14",
+ "MXM3_12",
+ "MXM3_2",
+ "MXM3_184",
+ "MXM3_180",
+ "MXM3_178",
+ "MXM3_176",
+ "MXM3_188",
+ "MXM3_186",
+ "MXM3_160",
+ "MXM3_162",
+ "MXM3_150",
+ "MXM3_144",
+ "MXM3_154",
+ "MXM3_146",
+ "",
+ "",
+ "MXM3_72";
+};
+
+&gpio2 {
+ gpio-line-names = "MXM3_148",
+ "MXM3_152",
+ "MXM3_156",
+ "MXM3_158",
+ "MXM3_1/GPIO1",
+ "MXM3_3/GPIO2",
+ "MXM3_5/GPIO3",
+ "MXM3_7/GPIO4",
+ "MXM3_95",
+ "MXM3_6",
+ "MXM3_8",
+ "MXM3_123",
+ "MXM3_126",
+ "MXM3_128",
+ "MXM3_130",
+ "MXM3_132",
+ "MXM3_253",
+ "MXM3_251",
+ "MXM3_283",
+ "MXM3_281",
+ "MXM3_279",
+ "MXM3_277",
+ "MXM3_243",
+ "MXM3_235",
+ "MXM3_231",
+ "MXM3_229",
+ "MXM3_233",
+ "MXM3_198",
+ "MXM3_275",
+ "MXM3_273",
+ "MXM3_207",
+ "MXM3_122";
+};
+
+&gpio3 {
+ gpio-line-names = "MXM3_271",
+ "MXM3_269",
+ "MXM3_301",
+ "MXM3_299",
+ "MXM3_297",
+ "MXM3_295",
+ "MXM3_293",
+ "MXM3_291",
+ "MXM3_289",
+ "MXM3_287",
+ "MXM3_249",
+ "MXM3_247",
+ "MXM3_245",
+ "MXM3_286",
+ "MXM3_239",
+ "MXM3_35",
+ "MXM3_205",
+ "MXM3_203",
+ "MXM3_201",
+ "MXM3_116",
+ "MXM3_114",
+ "MXM3_262",
+ "MXM3_274",
+ "MXM3_124",
+ "MXM3_110",
+ "MXM3_120",
+ "MXM3_263",
+ "MXM3_265",
+ "",
+ "MXM3_135",
+ "MXM3_261",
+ "MXM3_259";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "MXM3_194",
+ "MXM3_136",
+ "MXM3_134",
+ "MXM3_140",
+ "MXM3_138",
+ "",
+ "MXM3_220",
+ "",
+ "",
+ "MXM3_18",
+ "MXM3_16",
+ "",
+ "",
+ "MXM3_214",
+ "MXM3_216",
+ "MXM3_164";
+};
+
+&gpio5 {
+ gpio-line-names = "MXM3_159",
+ "",
+ "",
+ "",
+ "MXM3_257",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MXM3_200",
+ "MXM3_196",
+ "MXM3_204",
+ "MXM3_202",
+ "",
+ "",
+ "",
+ "",
+ "MXM3_191",
+ "MXM3_197",
+ "MXM3_77",
+ "MXM3_195",
+ "MXM3_221",
+ "MXM3_225",
+ "MXM3_223",
+ "MXM3_227",
+ "MXM3_209",
+ "MXM3_211",
+ "MXM3_118",
+ "MXM3_112",
+ "MXM3_187",
+ "MXM3_185";
+};
+
+&gpio6 {
+ gpio-line-names = "MXM3_183",
+ "MXM3_181",
+ "MXM3_179",
+ "MXM3_177",
+ "MXM3_175",
+ "MXM3_173",
+ "MXM3_255",
+ "MXM3_83",
+ "MXM3_91",
+ "MXM3_13/GPIO6",
+ "MXM3_11/GPIO5",
+ "MXM3_79",
+ "",
+ "",
+ "MXM3_190",
+ "MXM3_193",
+ "MXM3_89";
+};
+
+&gpio7 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MXM3_99",
+ "MXM3_85",
+ "MXM3_217",
+ "MXM3_215";
+};
+
+&gpr {
+ ipu1_csi0_mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port@1 {
+ reg = <1>;
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+ };
+ };
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
+
+ atmel_mxt_ts: touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ /* These GPIOs are muxed with the iomuxc node */
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */
+ reg = <0x4a>;
+ reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */
+ status = "disabled";
+ };
};
/*
sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- pmic: pfuze100@8 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze100";
+ fsl,pmic-stby-poweroff;
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1975000>;
+ regulator-min-microvolt = <400000>;
};
swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5150000>;
+ regulator-min-microvolt = <5000000>;
};
snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1000000>;
};
vref_reg: vrefddr {
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
};
vgen1_reg: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1550000>;
+ regulator-min-microvolt = <800000>;
};
vgen2_reg: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1550000>;
+ regulator-min-microvolt = <800000>;
};
vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
vgen4_reg: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
};
vgen5_reg: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
vgen6_reg: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
};
};
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
- reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
+ reg = <0x0a>;
VDDA-supply = <®_module_3v3_audio>;
VDDIO-supply = <®_module_3v3>;
VDDD-supply = <&vgen4_reg>;
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_touch_int>;
- reg = <0x41>;
+ blocks = <0x5>;
+ id = <0>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio4>;
interrupt-controller;
- id = <0>;
- blocks = <0x5>;
+ interrupt-parent = <&gpio4>;
irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ reg = <0x41>;
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
/* 12-bit ADC */
/* ADC conversion time: 80 clocks */
st,sample-time = <4>;
- stmpe_touchscreen: stmpe-touchscreen {
+ stmpe_ts: stmpe_touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
+ status = "disabled";
};
- stmpe_adc: stmpe-adc {
+ stmpe_adc: stmpe_adc {
compatible = "st,stmpe-adc";
+ #io-channel-cells = <1>;
/* forbid to use ADC channels 3-0 (touch) */
st,norequest-mask = <0x0F>;
- #io-channel-cells = <1>;
};
};
};
scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
+
+ adv_7280: adv7280@21 {
+ compatible = "adi,adv7280";
+ adv,force-bt656-4;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ reg = <0x21>;
+ status = "disabled";
+
+ port {
+ adv7280_to_ipu1_csi0_mux: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
+
+ ov5640_csi_cam: ov5640_mipi@3c {
+ compatible = "ovti,ov5640";
+ AVDD-supply = <®_ov5640_2v8_a_vdd>;
+ DOVDD-supply = <®_ov5640_1v8_d_o_vdd>;
+ DVDD-supply = <®_ov5640_1v8_d_o_vdd>;
+ clock-names = "xclk";
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cam_mclk>;
+ /* These GPIOs are muxed with the iomuxc node */
+ powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ reg = <0x3c>;
+ reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ port {
+ ov5640_to_mipi_csi2: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi_from_ov5640>;
+ };
+ };
+ };
+};
+
+&ipu1_di1_disp1 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ lvds-channel@0 {
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ };
+ };
+ };
+};
+
+&mipi_csi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_from_ov5640: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ };
+ };
};
&pwm1 {
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "disabled";
};
&uart1 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};
&uart2 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_dte>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};
&uart4 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_dte>;
- fsl,dte-mode;
status = "disabled";
};
&uart5 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_dte>;
- fsl,dte-mode;
status = "disabled";
};
&usbotg {
+ disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
status = "disabled";
};
/* MMC1 */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
- vqmmc-supply = <®_module_3v3>;
bus-width = <8>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
disable-wp;
no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+ vqmmc-supply = <®_module_3v3>;
status = "disabled";
};
/* SD1 */
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- vqmmc-supply = <®_module_3v3>;
bus-width = <4>;
disable-wp;
no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vqmmc-supply = <®_module_3v3>;
status = "disabled";
};
/* eMMC */
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- vqmmc-supply = <®_module_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vqmmc-supply = <®_module_3v3>;
status = "okay";
};
};
&iomuxc {
- pinctrl_apalis_gpio1: gpio2io04grp {
+ /* Mux the Apalis GPIOs */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+ &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+ &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+ &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+ >;
+
+ pinctrl_apalis_gpio1: apalisgpio1grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
>;
};
- pinctrl_apalis_gpio2: gpio2io05grp {
+ pinctrl_apalis_gpio2: apalisgpio2grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
>;
};
- pinctrl_apalis_gpio3: gpio2io06grp {
+ pinctrl_apalis_gpio3: apalisgpio3grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
>;
};
- pinctrl_apalis_gpio4: gpio2io07grp {
+ pinctrl_apalis_gpio4: apalisgpio4grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
>;
};
- pinctrl_apalis_gpio5: gpio6io10grp {
+ pinctrl_apalis_gpio5: apalisgpio5grp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
>;
};
- pinctrl_apalis_gpio6: gpio6io09grp {
+ pinctrl_apalis_gpio6: apalisgpio6grp {
fsl,pins = <
MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
>;
};
- pinctrl_apalis_gpio7: gpio1io02grp {
+ pinctrl_apalis_gpio7: apalisgpio7grp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
>;
};
- pinctrl_apalis_gpio8: gpio1io06grp {
+ pinctrl_apalis_gpio8: apalisgpio8grp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
>;
>;
};
- pinctrl_gpio_bl_on: gpioblon {
+ pinctrl_gpio_bl_on: gpioblongrp {
fsl,pins = <
MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
>;
>;
};
- pinctrl_mmc_cd: gpiommccdgrp {
+ pinctrl_mmc_cd: mmccdgrp {
fsl,pins = <
/* MMC1 CD */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
>;
};
- pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+ pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
fsl,pins = <
/* USBH_EN */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
>;
};
- pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+ pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
fsl,pins = <
/* USBH_HUB_EN */
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
>;
};
- pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+ pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
fsl,pins = <
/* USBO1 power en */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
>;
};
- pinctrl_reset_moci: gpioresetmocigrp {
+ pinctrl_reset_moci: resetmocigrp {
fsl,pins = <
/* RESET_MOCI control */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
>;
};
- pinctrl_sd_cd: gpiosdcdgrp {
+ pinctrl_sd_cd: sdcdgrp {
fsl,pins = <
/* SD1 CD */
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
- pinctrl_touch_int: gpiotouchintgrp {
+ pinctrl_touch_int: touchintgrp {
fsl,pins = <
/* STMPE811 interrupt */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};
+ /* Additional DTR, DSR, DCD */
+ pinctrl_uart1_ctrl: uart1ctrlgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+ >;
+ };
+
pinctrl_uart1_dce: uart1dcegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
>;
};
- /* Additional DTR, DSR, DCD */
- pinctrl_uart1_ctrl: uart1ctrlgrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
- MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
- MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
- >;
- };
-
pinctrl_uart2_dce: uart2dcegrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
>;
};
- pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+ pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
>;
};
- pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+ pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Toradex Colibri iMX6DL/S Module";
backlight: backlight {
compatible = "pwm-backlight";
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
power-supply = <®_module_3v3>;
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
status = "disabled";
};
compatible = "fsl,sgtl5000";
clocks = <&clks IMX6QDL_CLK_CKO>;
lrclk-strength = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
VDDA-supply = <®_module_3v3_audio>;
/* Colibri PWM<A> */
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "disabled";
pinctrl_audmux: audmuxgrp {
fsl,pins = <
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
>;
};
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
status = "okay";
};
reg = <0>;
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
- vcc-supply = <®_3v3>;
+ vcc-supply = <®_3v3>;
pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = /bits/ 16 <850>;
ti,y-plate-ohms = /bits/ 16 <295>;
ti,pressure-min = /bits/ 16 <2>;
ti,pressure-max = /bits/ 16 <1500>;
- ti,vref-mv = /bits/ 16 <3300>;
+ ti,vref-mv = /bits/ 16 <3300>;
ti,settle-delay-usec = /bits/ 16 <15>;
ti,vref-delay-usecs = /bits/ 16 <0>;
ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
};
+ reg_tft_vcom: regulator-tft-vcom {
+ compatible = "pwm-regulator";
+ pwms = <&pwm3 0 20000 0>;
+ regulator-name = "tft_vcom";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ voltage-table = <3600000 26>;
+ };
+
reg_vcc_mmc: regulator-vcc-mmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
#phy-cells = <0>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
status = "disabled";
};
- bus@2000000 { /* AIPS1 */
+ aips1: bus@2000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- bus@2100000 { /* AIPS2 */
+ aips2: bus@2100000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
wakeup-source;
};
- fl {
+ key-fl {
label = "Frontlight";
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BRIGHTNESS_CYCLE>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- on {
+ led-0 {
label = "tolinoshine2hd:white:on";
gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
#phy-cells = <0>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
&adc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc1>;
- num-channels = <3>;
vref-supply = <®_vref_adc>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc1>;
vref-supply = <®_adc1_vref_3v3>;
- /*
- * driver can not separate a specific channel so we request 4 channels
- * here - we need only the fourth channel
- */
- num-channels = <4>;
status = "disabled";
};
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
};
&iomuxc {
clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1025000
- 198000 950000
- >;
- fsl,soc-operating-points = <
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1025000>,
+ <198000 950000>;
+ fsl,soc-operating-points =
/* KHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clocks = <&clks IMX6UL_CLK_ARM>,
<&clks IMX6UL_CLK_PLL2_BUS>,
<&clks IMX6UL_CLK_PLL2_PFD2>,
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
intc: interrupt-controller@a01000 {
};
kpp: keypad@20b8000 {
- compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+ compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_KPP>;
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ADC1>;
- num-channels = <2>;
clock-names = "adc";
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
};
csi: csi@21c4000 {
- compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+ compatible = "fsl,imx6ul-csi";
reg = <0x021c4000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CSI>;
};
lcdif: lcdif@21c8000 {
- compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+ compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
reg = <0x021c8000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+ compatible = "fsl,imx6ul-qspi";
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
};
&adc1 {
- num-channels = <10>;
vref-supply = <®_module_3v3_avdd>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc1>;
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
/* Errata ERR010450 Workaround */
max-frequency = <99000000>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
/* Errata ERR010450 Workaround */
max-frequency = <99000000>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
};
/ {
- soc {
+ soc: soc {
aips3: bus@2200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
status = "okay";
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
*/
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiokeys>;
-
- power {
- label = "Wake-Up";
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- panel: panel {
- compatible = "edt,et057090dhu";
- backlight = <&bl>;
- power-supply = <®_3v3>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lcdif_out>;
- };
- };
- };
-
- reg_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_5v0: regulator-5v0 {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_usbh_vbus: regulator-usbh-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh_reg>;
- regulator-name = "VCC_USB[1-4]";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
- vin-supply = <®_5v0>;
- };
-};
-
+/* Colibri AD0 to AD3 */
&adc1 {
status = "okay";
};
-/*
- * ADC2 is not available on the Aster board and
- * conflicts with AD7879 resistive touchscreen.
- */
-&adc2 {
- status = "disabled";
-};
-
-&bl {
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- power-supply = <®_3v3>;
+/* Colibri SSP */
+&ecspi3 {
+ cs-gpios = <
+ &gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or */
+ &gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+ &gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+ >;
status = "okay";
};
+/* Colibri Fast Ethernet */
&fec1 {
status = "okay";
};
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
&i2c4 {
status = "okay";
-
- /* Microchip/Atmel maxtouch controller */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiotouch>;
- reg = <0x4a>;
- interrupt-parent = <&gpio2>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */
- reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 */
- };
-
- /* M41T0M6 real time clock on carrier board */
- rtc: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
-};
-
-&iomuxc {
- pinctrl_gpiotouch: touchgpios {
- fsl,pins = <
- MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74
- MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14
- >;
- };
-};
-
-&lcdif {
- status = "okay";
-
- port {
- lcdif_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
};
+/* Colibri PWM<A> */
&pwm1 {
status = "okay";
};
+/* Colibri PWM<B> */
&pwm2 {
status = "okay";
};
+/* Colibri PWM<C> */
&pwm3 {
status = "okay";
};
+/* Colibri PWM<D> */
&pwm4 {
status = "okay";
};
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
+/* Colibri UART_A */
&uart1 {
status = "okay";
};
+/* Colibri UART_B */
&uart2 {
status = "okay";
};
+/* Colibri UART_C */
&uart3 {
status = "okay";
};
+/* Colibri USBC */
&usbotg1 {
status = "okay";
};
+/* Colibri MMC/SD */
&usdhc1 {
- keep-power-in-suspend;
- no-1-8-v;
- wakeup-source;
- vmmc-supply = <®_3v3>;
status = "okay";
};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
/ {
- aliases {
- rtc0 = &rtc;
- rtc1 = &snvs_rtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- /* fixed crystal dedicated to mpc258x */
+ /* Fixed crystal dedicated to MCP2515. */
clk16m: clk16m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <16000000>;
};
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiokeys>;
-
- power {
- label = "Wake-Up";
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- panel: panel {
- compatible = "edt,et057090dhu";
- backlight = <&bl>;
- power-supply = <®_3v3>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lcdif_out>;
- };
- };
- };
-
- reg_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_5v0: regulator-5v0 {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_usbh_vbus: regulator-usbh-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh_reg>;
- regulator-name = "VCC_USB[1-4]";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
- vin-supply = <®_5v0>;
- };
-};
-
-&bl {
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- power-supply = <®_3v3>;
-
- status = "okay";
};
+/* Colibri AD0 to AD3 */
&adc1 {
status = "okay";
};
-&adc2 {
- status = "okay";
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */
+ pinctrl-0 = <&pinctrl_atmel_adapter>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */
+ status = "disabled";
};
+/* Colibri SSP */
&ecspi3 {
status = "okay";
mcp2515: can@0 {
+ clocks = <&clk16m>;
compatible = "microchip,mcp2515";
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_int>;
reg = <0>;
- clocks = <&clk16m>;
- interrupt-parent = <&gpio5>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
vdd-supply = <®_3v3>;
xceiver-supply = <®_5v0>;
- status = "okay";
};
};
+/* Colibri Fast Ethernet */
&fec1 {
status = "okay";
};
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
&i2c4 {
status = "okay";
-
- /*
- * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
- * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
- */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiotouch>;
- reg = <0x4a>;
- interrupt-parent = <&gpio1>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
- reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */
- status = "disabled";
- };
-
- /* M41T0M6 real time clock on carrier board */
- rtc: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
-};
-
-&lcdif {
- status = "okay";
-
- port {
- lcdif_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
};
+/* Colibri PWM<A> */
&pwm1 {
status = "okay";
};
+/* Colibri PWM<B> */
&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
status = "okay";
};
+/* Colibri PWM<C> */
&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
status = "okay";
};
+/* Colibri PWM<D> */
&pwm4 {
status = "okay";
};
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
+/* Colibri UART_A */
&uart1 {
status = "okay";
};
+/* Colibri UART_B */
&uart2 {
status = "okay";
};
+/* Colibri UART_C */
&uart3 {
status = "okay";
};
+/* Colibri USBC */
&usbotg1 {
status = "okay";
};
+/* Colibri MMC/SD */
&usdhc1 {
- keep-power-in-suspend;
- wakeup-source;
- vmmc-supply = <®_3v3>;
status = "okay";
};
-
-&iomuxc {
- pinctrl_gpiotouch: touchgpios {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74
- MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14
- >;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+ reg_3v3_vmmc: regulator-3v3-vmmc {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3_vmmc";
+ startup-delay-us = <100>;
+ };
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+ status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+ status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+ status = "okay";
+};
+
+&gpio2 {
+ /*
+ * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
+ * turn the transceiver off, that property has to be deleted and the gpio handled in
+ * userspace.
+ * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
+ */
+ uart-b-c-on-x14-enable-hog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+ output-high;
+ };
+};
+
+&gpio5 {
+ uart-a-on-x13-enable-hog {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+ output-high;
+ };
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+ status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+ status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+ status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+ status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+ status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+ status = "okay";
+};
+
+/* Colibri MMC/SD, UHS-I capable uSD slot */
+&usdhc1 {
+ cap-power-off-card;
+ /delete-property/ keep-power-in-suspend;
+ /delete-property/ no-1-8-v;
+ vmmc-supply = <®_3v3_vmmc>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */
+ pinctrl-0 = <&pinctrl_atmel_adapter>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */
+};
+
+/* Colibri SSP */
+&ecspi3 {
+ status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+ status = "okay";
+};
+
+&gpio2 {
+ /*
+ * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
+ * transceiver off, that property has to be deleted and the gpio handled in userspace.
+ * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
+ */
+ uart25-tx-on-hog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+ output-high;
+ };
+};
+
+&gpio5 {
+ uart1-tx-on-hog {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+ output-high;
+ };
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+ status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+ status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+ status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+ status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+ status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+ status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+ status = "okay";
+};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
+#include <dt-bindings/pwm/pwm.h>
+
/ {
- bl: backlight {
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ backlight: backlight {
+ brightness-levels = <0 45 63 88 119 158 203 255>;
compatible = "pwm-backlight";
+ default-brightness-level = <4>;
+ enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm1 0 5000000 0>;
- enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_module_3v3>;
+ pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+ status = "disabled";
};
- reg_module_3v3: regulator-module-3v3 {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ extcon_usbc_det: usbc-det {
+ compatible = "linux,extcon-usb-gpio";
+ debounce = <25>;
+ id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbc_det>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ wakeup {
+ debounce-interval = <10>;
+ gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ panel_dpi: panel-dpi {
+ backlight = <&backlight>;
+ compatible = "edt,et057090dhu";
+ power-supply = <®_3v3>;
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcdif_out>;
+ };
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
- regulator-name = "+V3.3";
- regulator-min-microvolt = <3300000>;
+ regulator-always-on;
regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3.3V";
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "5V";
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3";
};
reg_module_3v3_avdd: regulator-module-3v3-avdd {
compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
regulator-name = "+V3.3_AVDD_AUDIO";
+ };
+
+ reg_module_3v3_eth: regulator-module-3v3-eth {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <200000>;
+ regulator-name = "+V3.3_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <200000>;
+ vin-supply = <®_LDO1>;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh_reg>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VCC_USB[1-4]";
+ vin-supply = <®_5v0>;
};
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "imx7-sgtl5000";
- simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,name = "imx7-sgtl5000";
+
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
dailink_master: simple-audio-card,codec {
- sound-dai = <&codec>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+ sound-dai = <&codec>;
};
};
};
+/* Colibri AD0 to AD3 */
&adc1 {
vref-supply = <®_DCDC3>;
};
-&adc2 {
- vref-supply = <®_DCDC3>;
-};
+/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
&cpu0 {
cpu-supply = <®_DCDC2>;
};
+/* Colibri SSP */
&ecspi3 {
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
- cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
};
+/* Colibri Fast Ethernet */
&fec1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_enet1>;
- pinctrl-1 = <&pinctrl_enet1_sleep>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
- clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
- assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
- <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
- phy-mode = "rmii";
- phy-supply = <®_LDO1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
fsl,magic-packet;
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ phy-supply = <®_module_3v3_eth>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_enet1>;
+ pinctrl-1 = <&pinctrl_enet1_sleep>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Micrel KSZ8041RNL */
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ max-speed = <100>;
+ micrel,led-mode = <0>;
+ reg = <0>;
+ };
+ };
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
- status = "disabled";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
- status = "disabled";
};
&gpio1 {
"SODIMM_137";
};
+/* NAND on such SKUs */
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
fsl,use-minimum-ecc;
- nand-on-flash-bbt;
nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
};
+/* On-module Power I2C */
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
status = "okay";
codec: sgtl5000@a {
- compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
- reg = <0x0a>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+ compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
+ reg = <0xa>;
VDDA-supply = <®_module_3v3_avdd>;
- VDDIO-supply = <®_module_3v3>;
VDDD-supply = <®_DCDC3>;
+ VDDIO-supply = <®_module_3v3>;
};
- ad7879@2c {
+ ad7879_ts: touchscreen@2c {
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,resistance-plate-x = <120>;
compatible = "adi,ad7879-1";
- reg = <0x2c>;
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x2c>;
touchscreen-max-pressure = <4096>;
- adi,resistance-plate-x = <120>;
- adi,first-conversion-delay = /bits/ 8 <3>;
- adi,acquisition-time = /bits/ 8 <1>;
- adi,median-filter-size = /bits/ 8 <2>;
- adi,averaging = /bits/ 8 <1>;
- adi,conversion-interval = /bits/ 8 <255>;
+ status = "disabled";
};
pmic@33 {
reg = <0x33>;
regulators {
- reg_DCDC1: DCDC1 { /* V1.0_SOC */
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
+ reg_DCDC1: DCDC1 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-name = "+V1.0_SOC";
};
- reg_DCDC2: DCDC2 { /* V1.1_ARM */
- regulator-min-microvolt = <975000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
+ reg_DCDC2: DCDC2 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <975000>;
+ regulator-name = "+V1.1_ARM";
};
- reg_DCDC3: DCDC3 { /* V1.8 */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
+ reg_DCDC3: DCDC3 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8";
};
- reg_DCDC4: DCDC4 { /* V1.35_DRAM */
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
+ reg_DCDC4: DCDC4 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-name = "+V1.35_DRAM";
};
- reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ reg_LDO1: LDO1 {
regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "PWR_EN_+V3.3_ETH";
};
- reg_LDO2: LDO2 { /* +V1.8_SD */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ reg_LDO2: LDO2 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8_SD";
};
- reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ reg_LDO3: LDO3 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "PWR_EN_+V3.3_LPSR";
};
- reg_LDO4: LDO4 { /* V1.8_LPSR */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
+ reg_LDO4: LDO4 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8_LPSR";
};
- reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ reg_LDO5: LDO5 {
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "PWR_EN_+V3.3";
};
};
};
};
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c4_recovery>;
scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "disabled";
+
+ /* Atmel maxtouch controller */
+ atmel_mxt_ts: touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ interrupt-parent = <&gpio2>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_atmel_connector>;
+ reg = <0x4a>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */
+ status = "disabled";
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ status = "disabled";
+ };
};
&lcdif {
+ assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
+ status = "disabled";
+
+ port {
+ lcdif_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
};
+/* Colibri PWM<A> */
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
};
+/* Colibri PWM<B> */
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
};
+/* Colibri PWM<C> */
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
};
+/* Colibri PWM<D> */
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
};
®_1p0d {
- vin-supply = <®_DCDC3>;
+ vin-supply = <®_DCDC3>; /* VDDA_1P8_IN */
};
&sai1 {
status = "okay";
};
+/* Colibri UART_A */
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
- uart-has-rtscts;
fsl,dte-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+ uart-has-rtscts;
};
+/* Colibri UART_B */
&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
- uart-has-rtscts;
fsl,dte-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
};
+/* Colibri UART_C */
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
fsl,dte-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
};
+/* Colibri USBC */
&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
+ extcon = <0>, <&extcon_usbc_det>;
};
+/* Colibri MMC/SD */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
disable-wp;
+ no-1-8-v;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+ pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+ vmmc-supply = <®_3v3>;
vqmmc-supply = <®_LDO2>;
+ wakeup-source;
};
+/* eMMC on 1GB (eMMC) SKUs */
&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
- vmmc-supply = <®_module_3v3>;
- vqmmc-supply = <®_DCDC3>;
non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
sdhci-caps-mask = <0x80000000 0x0>;
+ vmmc-supply = <®_module_3v3>;
+ vqmmc-supply = <®_DCDC3>;
};
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
- &pinctrl_gpio7 &pinctrl_usbc_det>;
-
- pinctrl_gpio1: gpio1-grp {
- fsl,pins = <
- MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
- MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
- MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
- MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */
- MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */
- MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */
- MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */
- MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */
- MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */
- MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */
- MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */
- MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */
- MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */
- MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */
- MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */
- MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */
- MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */
- MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */
- MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */
- MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */
- MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
- MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
- MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */
- MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */
- MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */
- MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */
- MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */
- MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */
- MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */
- MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */
- MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */
- MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */
- MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */
- MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */
- MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */
- MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */
- MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */
- MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */
- MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */
- MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */
- >;
- };
-
- pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+ /*
+ * Atmel MXT touchsceen + Capacitive Touch Adapter
+ * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
+ * Don't use them simultaneously.
+ */
+ pinctrl_atmel_adapter: atmelconnectorgrp {
fsl,pins = <
- MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
- MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */
- MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
- MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
- MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */
- MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */
- MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */
- MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */
- MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */
- MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */
- MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */
- MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 /* SODIMM 28 / INT */
+ MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 /* SODIMM 30 / RST */
>;
};
- pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+ /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+ pinctrl_atmel_connector: atmeladaptergrp {
fsl,pins = <
- MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */
- MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */
- MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */
- MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */
- MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */
- MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 / RST */
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 / INT */
>;
};
- pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+ pinctrl_can_int: canintgrp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */
- MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
>;
};
- pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+ pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 /* SODIMM 90 */
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 /* SODIMM 92 */
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 /* SODIMM 88 */
>;
};
- pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+ pinctrl_ecspi3_cs: ecspi3csgrp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
- >;
- };
-
- pinctrl_can_int: can-int-grp {
- fsl,pins = <
- MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 /* SODIMM 86 */
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73
-
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73
MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73
MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
MX7D_PAD_SD2_WP__ENET1_MDC 0x3
>;
};
- pinctrl_enet1_sleep: enet1sleepgrp {
+ pinctrl_enet1_sleep: enet1-sleepgrp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0
MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x0
MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0
MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0
-
- MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0
+ MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0
MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0
MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0
+ MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0
MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0
MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x0
MX7D_PAD_SD2_WP__GPIO5_IO10 0x0
>;
};
- pinctrl_ecspi3_cs: ecspi3-cs-grp {
+ pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
- MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14
+ MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */
+ MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */
>;
};
- pinctrl_ecspi3: ecspi3-grp {
+ pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
- MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
- MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2
- MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */
>;
};
- pinctrl_flexcan1: flexcan1-grp {
+ pinctrl_gpio1: gpio1grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
+ MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */
+ MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */
+ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
+ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
+ MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */
>;
};
- pinctrl_flexcan2: flexcan2-grp {
+ pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
fsl,pins = <
- MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */
- MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */
+ MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
+ MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */
+ MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
+ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */
+ MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */
+ MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */
+ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */
+ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */
+ MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */
+ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */
+ MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */
+ MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */
+ >;
+ };
+
+ pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
>;
};
- pinctrl_gpio_bl_on: gpio-bl-on {
+ pinctrl_gpio_bl_on: gpioblongrp {
fsl,pins = <
MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
>;
};
- pinctrl_gpmi_nand: gpmi-nand-grp {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
- MX7D_PAD_SD3_CLK__NAND_CLE 0x71
- MX7D_PAD_SD3_CMD__NAND_ALE 0x71
MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71
MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74
- MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
- MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
+ MX7D_PAD_SD3_CLK__NAND_CLE 0x71
+ MX7D_PAD_SD3_CMD__NAND_ALE 0x71
MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71
MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71
MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71
MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71
MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71
MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71
+ MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
+ MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
>;
};
- pinctrl_i2c4: i2c4-grp {
+ pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f
- MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f /* SODIMM 196 */
+ MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f /* SODIMM 194 */
>;
};
>;
};
- pinctrl_lcdif_dat: lcdif-dat-grp {
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 /* SODIMM 76 */
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 /* SODIMM 70 */
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 /* SODIMM 60 */
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 /* SODIMM 58 */
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 /* SODIMM 78 */
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 /* SODIMM 72 */
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 /* SODIMM 80 */
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 /* SODIMM 46 */
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 /* SODIMM 62 */
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 /* SODIMM 48 */
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 /* SODIMM 74 */
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 /* SODIMM 50 */
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 /* SODIMM 52 */
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 /* SODIMM 54 */
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 /* SODIMM 66 */
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 /* SODIMM 64 */
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 /* SODIMM 57 */
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 /* SODIMM 61 */
+ >;
+ };
+
+ pinctrl_lcdif_dat_24: lcdifdat24grp {
fsl,pins = <
- MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
- MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
- MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
- MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
- MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
- MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
- MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
- MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
- MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
- MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
- MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
- MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
- MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
- MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
- MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
- MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
- MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
- MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 /* SODIMM 136 */
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 /* SODIMM 138 */
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 /* SODIMM 140 */
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 /* SODIMM 142 */
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 /* SODIMM 144 */
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 /* SODIMM 146 */
>;
};
- pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
fsl,pins = <
- MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
- MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
- MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
- MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
- MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
- MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79 /* SODIMM 56 */
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 /* SODIMM 44 */
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 /* SODIMM 68 */
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 /* SODIMM 82 */
>;
};
- pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+ pinctrl_lvds_transceiver: lvdstx {
fsl,pins = <
- MX7D_PAD_LCD_CLK__LCD_CLK 0x79
- MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
- MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
- MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */
>;
};
- pinctrl_pwm1: pwm1-grp {
+ pinctrl_pwm1: pwm1grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
- MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 /* SODIMM 59 */
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 /* SODIMM 59 */
>;
};
- pinctrl_pwm2: pwm2-grp {
+ pinctrl_pwm2: pwm2grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 /* SODIMM 28 */
>;
};
- pinctrl_pwm3: pwm3-grp {
+ pinctrl_pwm3: pwm3grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 /* SODIMM 30 */
>;
};
- pinctrl_pwm4: pwm4-grp {
+ pinctrl_pwm4: pwm4grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
- MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 /* SODIMM 67 */
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 /* SODIMM 67 */
>;
};
- pinctrl_uart1: uart1-grp {
+ pinctrl_uart1: uart1grp {
fsl,pins = <
- MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79
- MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79
- MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79
- MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79
+ MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 /* SODIMM 25 */
+ MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 /* SODIMM 27 */
+ MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 /* SODIMM 35 */
+ MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 /* SODIMM 33 */
>;
};
- pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+ pinctrl_uart1_ctrl1: uart1ctrl1grp {
fsl,pins = <
- MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */
- MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */
+ MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* SODIMM 23 / DTR */
+ MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* SODIMM 31 / DCD */
>;
};
- pinctrl_uart2: uart2-grp {
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 /* SODIMM 32 / CTS */
+ MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 /* SODIMM 34 / RTS */
+ MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 /* SODIMM 38 */
+ MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 /* SODIMM 36 */
+ >;
+ };
+ pinctrl_uart3: uart3grp {
fsl,pins = <
- MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
- MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
- MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
- MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 /* SODIMM 21 */
+ MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 /* SODIMM 19 */
>;
};
- pinctrl_uart3: uart3-grp {
+
+ pinctrl_usbc_det: usbcdetgrp {
fsl,pins = <
- MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
- MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 /* SODIMM 137 / USBC_DET */
>;
};
- pinctrl_usbc_det: gpio-usbc-det {
+ pinctrl_usbh_reg: usbhreggrp {
fsl,pins = <
- MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 / USBH_PEN */
>;
};
- pinctrl_usbh_reg: gpio-usbh-vbus {
+ pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
- MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19 /* SODIMM 47 */
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59 /* SODIMM 190 */
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 /* SODIMM 192 */
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 /* SODIMM 49 */
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 /* SODIMM 51 */
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 /* SODIMM 53 */
>;
};
- pinctrl_usdhc1: usdhc1-grp {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x59
- MX7D_PAD_SD1_CLK__SD1_CLK 0x19
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ /* Avoid backfeeding with removed card power. */
+ pinctrl_usdhc1_sleep: usdhc1-slpgrp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x10
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x10
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x10
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x10
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x10
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x10
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
- MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
>;
};
- pinctrl_sai1: sai1-grp {
+ pinctrl_sai1: sai1grp {
fsl,pins = <
- MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
- MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
>;
};
- pinctrl_sai1_mclk: sai1grp_mclk {
+ pinctrl_sai1_mclk: sai1mclkgrp {
fsl,pins = <
MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_lpsr>;
- pinctrl_gpio_lpsr: gpio1-grp {
+ pinctrl_cd_usdhc1: cdusdhc1grp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59
- MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* SODIMM 43 / MMC_CD */
+ >;
+ };
+
+ pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0
+ >;
+ };
+
+ pinctrl_gpio_lpsr: gpiolpsrgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 /* SODIMM 135 */
+ MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 /* SODIMM 22 */
>;
};
pinctrl_gpiokeys: gpiokeysgrp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 /* SODIMM 45 / WAKE_UP */
>;
};
- pinctrl_i2c1: i2c1-grp {
+ pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f
MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f
>;
};
>;
};
- pinctrl_cd_usdhc1: usdhc1-cd-grp {
- fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
- >;
- };
-
- pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+ pinctrl_uart1_ctrl2: uart1ctrl2grp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
- MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* SODIMM 37 / RI */
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* SODIMM 29 / DSR */
>;
};
};
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
*/
/dts-v1/;
/ {
model = "Toradex Colibri iMX7D on Aster Carrier Board";
- compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+ compatible = "toradex,colibri-imx7d-aster",
+ "toradex,colibri-imx7d",
"fsl,imx7d";
};
+&ad7879_ts {
+ status = "okay";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri USBH */
&usbotg2 {
- vbus-supply = <®_usbh_vbus>;
status = "okay";
};
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
*
*/
/ {
model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
compatible = "toradex,colibri-imx7d-emmc-aster",
- "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+ "toradex,colibri-imx7d-emmc",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
};
+/* Colibri USBH */
&usbotg2 {
- vbus-supply = <®_usbh_vbus>;
status = "okay";
};
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
*/
/dts-v1/;
/ {
model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
compatible = "toradex,colibri-imx7d-emmc-eval-v3",
- "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+ "toradex,colibri-imx7d-emmc",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
};
+/* Colibri USBH */
&usbotg2 {
- vbus-supply = <®_usbh_vbus>;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
+ compatible = "toradex,colibri-imx7d-emmc-iris-v2",
+ "toradex,colibri-imx7d-emmc",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
+ compatible = "toradex,colibri-imx7d-emmc-iris",
+ "toradex,colibri-imx7d-emmc",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+ status = "okay";
+};
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
*/
#include "imx7d.dtsi"
#include "imx7-colibri.dtsi"
/ {
+ aliases {
+ /* Required to properly pass MAC addresses from bootloader. */
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
};
+&cpu1 {
+ cpu-supply = <®_DCDC2>;
+};
+
&gpio6 {
gpio-line-names = "",
"",
"SODIMM_34";
};
+/* Colibri USBH */
&usbotg2 {
dr_mode = "host";
+ vbus-supply = <®_usbh_vbus>;
};
+/* eMMC */
&usdhc3 {
status = "okay";
};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
/dts-v1/;
/ {
model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
- compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+ compatible = "toradex,colibri-imx7d-eval-v3",
+ "toradex,colibri-imx7d",
"fsl,imx7d";
};
+&ad7879_ts {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ status = "disabled";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri USBH */
&usbotg2 {
- vbus-supply = <®_usbh_vbus>;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
+ compatible = "toradex,colibri-imx7d-iris-v2",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
+};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&gpio2 {
+ /*
+ * This switches the LVDS transceiver to VESA color mapping mode.
+ */
+ lvds-color-map-hog {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+ line-name = "LVDS_COLOR_MAP";
+ output-low;
+ };
+};
+
+&gpio7 {
+ /*
+ * This switches the LVDS transceiver to the 24-bit RGB mode.
+ */
+ lvds-rgb-mode-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+ line-name = "LVDS_RGB_MODE";
+ output-low;
+ };
+
+ /*
+ * This switches the LVDS transceiver to the single-channel
+ * output mode.
+ */
+ lvds-ch-mode-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+ line-name = "LVDS_CH_MODE";
+ output-high;
+ };
+
+ /* This turns the LVDS transceiver on */
+ lvds-power-on-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+ line-name = "LVDS_POWER_ON";
+ output-high;
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D on Iris Carrier Board";
+ compatible = "toradex,colibri-imx7d-iris",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
+};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ status = "disabled";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+ status = "okay";
+};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
#include "imx7d.dtsi"
#include "imx7-colibri.dtsi"
/ {
+ aliases {
+ /* Required to properly pass MAC addresses from bootloader. */
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
cpu-supply = <®_DCDC2>;
};
+/* NAND */
&gpmi {
status = "okay";
};
+/* Colibri USBH */
&usbotg2 {
dr_mode = "host";
+ vbus-supply = <®_usbh_vbus>;
};
compatible = "ti,tsc2046";
reg = <0>;
spi-max-frequency = <1000000>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
no-1-8-v;
- enable-sdio-wakeup;
+ wakeup-source;
keep-power-in-suspend;
status = "okay";
};
no-1-8-v;
non-removable;
vmmc-supply = <®_wifi>;
- enable-sdio-wakeup;
+ wakeup-source;
status = "okay";
};
#phy-cells = <0>;
};
- soc {
+ soc: soc {
etm@3007d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x3007d000 0x1000>;
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
*
*/
/ {
model = "Toradex Colibri iMX7S on Aster Carrier Board";
- compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+ compatible = "toradex,colibri-imx7s-aster",
+ "toradex,colibri-imx7s",
"fsl,imx7s";
};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
/dts-v1/;
/ {
model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
- compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+ compatible = "toradex,colibri-imx7s-eval-v3",
+ "toradex,colibri-imx7s",
"fsl,imx7s";
};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ status = "disabled";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
+ compatible = "toradex,colibri-imx7s-iris-v2",
+ "toradex,colibri-imx7s",
+ "fsl,imx7s";
+};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&gpio2 {
+ /*
+ * This switches the LVDS transceiver to VESA color mapping mode.
+ */
+ lvds-color-map-hog {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+ line-name = "LVDS_COLOR_MAP";
+ output-low;
+ };
+};
+
+&gpio7 {
+ /*
+ * This switches the LVDS transceiver to the 24-bit RGB mode.
+ */
+ lvds-rgb-mode-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+ line-name = "LVDS_RGB_MODE";
+ output-low;
+ };
+
+ /*
+ * This switches the LVDS transceiver to the single-channel
+ * output mode.
+ */
+ lvds-ch-mode-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+ line-name = "LVDS_CH_MODE";
+ output-high;
+ };
+
+ /* This turns the LVDS transceiver on */
+ lvds-power-on-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+ line-name = "LVDS_POWER_ON";
+ output-high;
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7S on Iris Carrier Board";
+ compatible = "toradex,colibri-imx7s-iris",
+ "toradex,colibri-imx7s",
+ "fsl,imx7s";
+};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ status = "disabled";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
*/
#include "imx7s.dtsi"
};
};
+/* NAND */
&gpmi {
status = "okay";
};
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
};
usdhc1: mmc@402c0000 {
- compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+ compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
reg = <0x402c0000 0x4000>;
interrupts = <110>;
clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
no-1-8-v;
max-frequency = <4000000>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
#size-cells = <1>;
clocks = <&chipclk13>;
ranges;
- queue-range = <0 0x2000>;
- linkram0 = <0x100000 0x4000>;
- linkram1 = <0 0x10000>;
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0 0x10000>;
qmgrs {
#address-cells = <1>;
interfaces {
gbe0: interface-0 {
slave-port = <0>;
- link-interface = <1>;
- phy-handle = <ðphy0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
};
gbe1: interface-1 {
slave-port = <1>;
- link-interface = <1>;
- phy-handle = <ðphy1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
};
};
secondary-slave-ports {
port-2 {
slave-port = <2>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-3 {
slave-port = <3>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-4 {
slave-port = <4>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-5 {
slave-port = <5>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-6 {
slave-port = <6>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-7 {
slave-port = <7>;
- link-interface = <2>;
+ link-interface = <2>;
};
};
};
clock-names = "pcie";
#address-cells = <3>;
#size-cells = <2>;
- reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+ reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
ranges = <0x82000000 0 0x60000000 0x60000000
0 0x10000000>;
};
mdio: mdio@24200f00 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x24200f00 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
- bus_freq = <2500000>;
+ bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
};
interfaces {
gbe0: interface-0 {
slave-port = <0>;
- link-interface = <5>;
+ link-interface = <5>;
};
};
};
*/
ti,system-reboot-controller;
mbox-names = "rx", "tx";
- mboxes= <&msgmgr 5 2>,
+ mboxes = <&msgmgr 5 2>,
<&msgmgr 0 0>;
reg-names = "debug_messages";
reg = <0x02921c00 0x400>;
dss: dss@02540000 {
compatible = "ti,k2g-dss";
- reg = <0x02540000 0x400>,
+ reg = <0x02540000 0x400>,
<0x02550000 0x1000>,
<0x02557000 0x1000>,
<0x0255a800 0x100>,
<0x0255ac00 0x100>;
reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
- clocks = <&k2g_clks 0x2 0>,
+ clocks = <&k2g_clks 0x2 0>,
<&k2g_clks 0x2 1>;
clock-names = "fck", "vp1";
interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
edma0: edma@2700000 {
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
- reg = <0x02700000 0x8000>;
+ reg = <0x02700000 0x8000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
edma0_tptc0: tptc@2760000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
- reg = <0x02760000 0x400>;
+ reg = <0x02760000 0x400>;
power-domains = <&k2g_pds 0x3f>;
};
edma0_tptc1: tptc@2768000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
- reg = <0x02768000 0x400>;
+ reg = <0x02768000 0x400>;
power-domains = <&k2g_pds 0x3f>;
};
edma1: edma@2728000 {
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
- reg = <0x02728000 0x8000>;
+ reg = <0x02728000 0x8000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
edma1_tptc0: tptc@27b0000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
- reg = <0x027b0000 0x400>;
+ reg = <0x027b0000 0x400>;
power-domains = <&k2g_pds 0x4f>;
};
edma1_tptc1: tptc@27b8000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
- reg = <0x027b8000 0x400>;
+ reg = <0x027b8000 0x400>;
power-domains = <&k2g_pds 0x4f>;
};
#size-cells = <1>;
clocks = <&chipclk13>;
ranges;
- queue-range = <0 0x4000>;
- linkram0 = <0x100000 0x8000>;
- linkram1 = <0x0 0x10000>;
+ queue-range = <0 0x4000>;
+ linkram0 = <0x100000 0x8000>;
+ linkram1 = <0x0 0x10000>;
qmgrs {
#address-cells = <1>;
#size-cells = <1>;
/* NetCP address range */
- ranges = <0 0x2000000 0x100000>;
+ ranges = <0 0x2000000 0x100000>;
clocks = <&clkpa>, <&clkcpgmac>;
clock-names = "pa_clk", "ethss_clk";
secondary-slave-ports {
port-2 {
slave-port = <2>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-3 {
slave-port = <3>;
- link-interface = <2>;
+ link-interface = <2>;
};
};
};
};
mdio: mdio@2090300 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02090300 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
- bus_freq = <2500000>;
+ bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
};
#size-cells = <1>;
clocks = <&chipclk13>;
ranges;
- queue-range = <0 0x2000>;
- linkram0 = <0x100000 0x4000>;
- linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
qmgrs {
#address-cells = <1>;
interfaces {
gbe0: interface-0 {
slave-port = <0>;
- link-interface = <1>;
- phy-handle = <ðphy0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
};
gbe1: interface-1 {
slave-port = <1>;
- link-interface = <1>;
- phy-handle = <ðphy1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
};
};
secondary-slave-ports {
port-2 {
slave-port = <2>;
- link-interface = <2>;
+ link-interface = <2>;
};
port-3 {
slave-port = <3>;
- link-interface = <2>;
+ link-interface = <2>;
};
};
};
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02348400 0x100>;
- clocks = <&clkuart2>;
+ clocks = <&clkuart2>;
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
};
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02348800 0x100>;
- clocks = <&clkuart3>;
+ clocks = <&clkuart3>;
interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
};
};
mdio: mdio@26200f00 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x26200f00 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
- bus_freq = <2500000>;
+ bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
};
interrupt-parent = <&gic>;
aliases {
- serial0 = &uart0;
+ serial0 = &uart0;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
};
psci {
- compatible = "arm,psci";
- method = "smc";
- cpu_suspend = <0x84000001>;
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
};
soc0: soc@0 {
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02530c00 0x100>;
- clocks = <&clkuart0>;
+ clocks = <&clkuart0>;
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
};
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02531000 0x100>;
- clocks = <&clkuart1>;
+ clocks = <&clkuart1>;
interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
};
clock-names = "pcie";
#address-cells = <3>;
#size-cells = <2>;
- reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+ reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
ranges = <0x82000000 0 0x50000000 0x50000000
0 0x10000000>;
pins = "GPIO_25", "GPIO_26";
function = "fc0_b";
};
+
+ usbs_a_pins: usbs-a-pins {
+ /* VBUS_DET */
+ pins = "GPIO_66";
+ function = "gpio";
+ };
};
&mdio0 {
status = "okay";
};
+&udc {
+ pinctrl-0 = <&usbs_a_pins>;
+ pinctrl-names = "default";
+ atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
&watchdog {
status = "okay";
};
*/
/dts-v1/;
#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
/ {
model = "Microchip EVB - LAN9662";
aliases {
serial0 = &usart3;
};
-};
-
-&gpio {
- fc_shrd7_pins: fc_shrd7-pins {
- pins = "GPIO_49";
- function = "fc_shrd7";
- };
- fc_shrd8_pins: fc_shrd8-pins {
- pins = "GPIO_54";
- function = "fc_shrd8";
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+ priority = <200>;
};
+};
- fc3_b_pins: fcb3-spi-pins {
- /* SCK, RXD, TXD */
- pins = "GPIO_51", "GPIO_52", "GPIO_53";
+&gpio {
+ fc3_b_pins: fc3-b-pins {
+ /* RX, TX */
+ pins = "GPIO_52", "GPIO_53";
function = "fc3_b";
};
&can0 {
pinctrl-0 = <&can0_b_pins>;
pinctrl-names = "default";
- status = "okay";
+ status = "disabled"; /* Conflict with switch */
};
&flx3 {
status = "okay";
usart3: serial@200 {
- pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>;
+ pinctrl-0 = <&fc3_b_pins>;
pinctrl-names = "default";
status = "okay";
};
};
+&mdio1 {
+ status = "okay";
+};
+
+&phy0 {
+ status = "okay";
+};
+
+&phy1 {
+ status = "okay";
+};
+
+&port0 {
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ phys = <&serdes 0 CU(0)>;
+ status = "okay";
+};
+
+&port1 {
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+ phys = <&serdes 1 CU(1)>;
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
&watchdog {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+ model = "Microchip EVB - LAN9662";
+ compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+ aliases {
+ serial0 = &usart3;
+ i2c102 = &i2c102;
+ i2c103 = &i2c103;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-controls = <&mux>;
+ i2c-parent = <&i2c4>;
+
+ i2c102: i2c-sfp@1 {
+ reg = <1>;
+ };
+
+ i2c103: i2c-sfp@2 {
+ reg = <2>;
+ };
+ };
+
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+ <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+ };
+
+ sfp2: sfp2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c102>;
+ tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in 2 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in 2 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp3: sfp3 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c103>;
+ tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in 3 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in 3 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&flx3 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ usart3: serial@200 {
+ pinctrl-0 = <&fc3_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+};
+
+&flx4 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c4: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nic_clk>;
+ pinctrl-0 = <&fc4_b_pins>;
+ pinctrl-names = "default";
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ i2c-sda-hold-time-ns = <1500>;
+ status = "okay";
+ };
+};
+
+&gpio {
+ fc3_b_pins: fc3-b-pins {
+ /* RXD, TXD */
+ pins = "GPIO_52", "GPIO_53";
+ function = "fc3_b";
+ };
+
+ fc4_b_pins: fc4-b-pins {
+ /* SCL, SDA */
+ pins = "GPIO_57", "GPIO_58";
+ function = "fc4_b";
+ };
+
+ sgpio_a_pins: sgpio-a-pins {
+ /* SCK, D0, D1, LD */
+ pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+ function = "sgpio_a";
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&phy0 {
+ status = "okay";
+};
+
+&phy1 {
+ status = "okay";
+};
+
+&port0 {
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ phys = <&serdes 0 CU(0)>;
+ status = "okay";
+};
+
+&port1 {
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+ phys = <&serdes 1 CU(1)>;
+ status = "okay";
+};
+
+&port2 {
+ sfp = <&sfp2>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ phys = <&serdes 2 SERDES6G(0)>;
+ status = "okay";
+};
+
+&port3 {
+ sfp = <&sfp3>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ phys = <&serdes 3 SERDES6G(1)>;
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&sgpio {
+ pinctrl-0 = <&sgpio_a_pins>;
+ pinctrl-names = "default";
+ microchip,sgpio-port-ranges = <0 3>, <8 11>;
+ status = "okay";
+
+ gpio@0 {
+ ngpios = <64>;
+ };
+ gpio@1 {
+ ngpios = <64>;
+ };
+};
+
+&switch {
+ status = "okay";
+};
sys_clk: sys_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <162500000>;
+ clock-frequency = <165625000>;
};
cpu_clk: cpu_clk {
#clock-cells = <1>;
clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
clock-names = "cpu", "ddr", "sys";
- reg = <0xe00c00a8 0x38>;
+ reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
};
timer {
#size-cells = <1>;
ranges;
+ udc: usb@200000 {
+ compatible = "microchip,lan9662-udc",
+ "atmel,sama5d3-udc";
+ reg = <0x00200000 0x80000>,
+ <0xe0808000 0x400>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+ };
+
switch: switch@e0000000 {
compatible = "microchip,lan966x-switch";
reg = <0xe0000000 0x0100000>,
status = "disabled";
};
+ can1: can@e0820000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&clks GCK_ID_MCAN1>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
reset: reset-controller@e200400c {
compatible = "microchip,lan966x-switch-reset";
reg = <0xe200400c 0x4>;
status = "disabled";
};
- usb0: ehci@40006100 {
+ usb0: usb@40006100 {
compatible = "nxp,lpc1850-ehci", "generic-ehci";
reg = <0x40006100 0x100>;
interrupts = <8>;
status = "disabled";
};
- usb1: ehci@40007100 {
+ usb1: usb@40007100 {
compatible = "nxp,lpc1850-ehci", "generic-ehci";
reg = <0x40007100 0x100>;
interrupts = <9>;
compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
reg = <0x40010000 0x2000>;
interrupts = <5>;
- interrupt-names = "macirq";
+ interrupt-names = "macirq";
clocks = <&ccu1 CLK_CPU_ETHERNET>;
clock-names = "stmmaceth";
resets = <&rgu 22>;
};
sgtl5000: audio-codec@2a {
- #sound-dai-cells=<0x0>;
+ #sound-dai-cells = <0x0>;
compatible = "fsl,sgtl5000";
reg = <0x2a>;
VDDA-supply = <®_3p3v>;
status = "disabled";
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1021a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen 4 3>;
+ clock-names = "sfp";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
ranges = <0x0 0xc8100000 0x100000>;
ao_arc_rproc: remoteproc@1c {
- compatible= "amlogic,meson-mx-ao-arc";
+ compatible = "amlogic,meson-mx-ao-arc";
reg = <0x1c 0x8>, <0x38 0x8>;
reg-names = "remap", "cpu";
status = "disabled";
};
ir_receiver: ir-receiver@480 {
- compatible= "amlogic,meson6-ir";
+ compatible = "amlogic,meson6-ir";
reg = <0x480 0x20>;
interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
&ao_arc_rproc {
- compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+ compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
amlogic,secbus2 = <&secbus2>;
sram = <&ao_arc_sram>;
resets = <&reset RESET_MEDIA_CPU>;
};
&ao_arc_rproc {
- compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+ compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
amlogic,secbus2 = <&secbus2>;
sram = <&ao_arc_sram>;
resets = <&reset RESET_MEDIA_CPU>;
afe: audio-controller {
compatible = "mediatek,mt2701-audio";
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
+ interrupt-names = "afe", "asys";
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&infracfg CLK_INFRA_AUDIO>,
compatible = "mediatek,mt2701-jpgdec";
reg = <0 0x15004000 0 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
<&imgsys CLK_IMG_JPGDEC>;
clock-names = "jpgdec-smi",
"jpgdec";
"mediatek,mtk-jpgenc";
reg = <0 0x1500a000 0 0x1000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&imgsys CLK_IMG_VENC>;
+ clocks = <&imgsys CLK_IMG_VENC>;
clock-names = "jpgenc";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
};
pericfg: syscon@10003000 {
- compatible = "mediatek,mt7623-pericfg",
+ compatible = "mediatek,mt7623-pericfg",
"mediatek,mt2701-pericfg",
"syscon";
reg = <0 0x10003000 0 0x1000>;
afe: audio-controller {
compatible = "mediatek,mt7623-audio",
"mediatek,mt2701-audio";
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
+ interrupt-names = "afe", "asys";
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&infracfg CLK_INFRA_AUDIO>,
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
gpio-keys {
compatible = "gpio-keys";
- reset {
+ button-reset {
label = "factory";
linux,code = <KEY_RESTART>;
gpios = <&pio 60 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 58 GPIO_ACTIVE_LOW>;
compatible = "nuvoton,npcm750-reset";
reg = <0xf0801000 0x70>;
#reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
};
clk: clock-controller@f0801000 {
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
ethernet = <0>;
- clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+ clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
clock-names = "stmmaceth", "clk_gmac";
pinctrl-names = "default";
pinctrl-0 = <&rg1_pins
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
ethernet = <1>;
- clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+ clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
clock-names = "stmmaceth", "clk_gmac";
pinctrl-names = "default";
pinctrl-0 = <&rg2_pins
nor@0,0 {
compatible = "cfi-flash";
- linux,mtd-name= "intel,ge28f256l18b85";
+ linux,mtd-name = "intel,ge28f256l18b85";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x04000000>;
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "hynix,h8kds0un0mer-4em";
+ linux,mtd-name = "hynix,h8kds0un0mer-4em";
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,mt29f2g16abdhc";
+ linux,mtd-name = "micron,mt29f2g16abdhc";
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
spi-cpol;
spi-cpha;
- backlight= <&backlight>;
+ backlight = <&backlight>;
label = "lcd";
port {
lcd_in: endpoint {
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,mt29c4g96maz";
+ linux,mtd-name = "micron,mt29c4g96maz";
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,nand";
+ linux,mtd-name = "micron,nand";
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
};
&mmc2 {
- status="disabled";
+ status = "disabled";
};
&mmc3 {
- status="disabled";
+ status = "disabled";
};
&omap3_pmx_core {
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,wait-monitoring-ns = <0>;
- gpmc,burst-length= <4>;
+ gpmc,burst-length = <4>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <100>;
gpmc,cs-wr-off-ns = <100>;
};
&twl_gpio {
- ti,pullups = <0x0>;
- ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+ ti,pullups = <0x0>;
+ ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};
&i2c2 {
};
&twl_gpio {
- ti,pullups = <0x000001>; /* BIT(0) */
- ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+ ti,pullups = <0x000001>; /* BIT(0) */
+ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
};
&vdac {
nand@0,0 {
compatible = "ti,omap2-nand";
- linux,mtd-name= "micron,mt29c4g96maz";
+ linux,mtd-name = "micron,mt29c4g96maz";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
lcd: lcd@1 {
reg = <1>; /* CS1 */
- compatible = "tpo,td043mtea1";
+ compatible = "tpo,td043mtea1";
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
nor@0,0 {
compatible = "cfi-flash";
- linux,mtd-name= "intel,pf48f6000m0y1be";
+ linux,mtd-name = "intel,pf48f6000m0y1be";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x08000000>;
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name= "micron,mt29f1g08abb";
+ linux,mtd-name = "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "sw";
};
onenand@2,0 {
- linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+ linux,mtd-name = "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,omap2-onenand";
clocks = <&usb_phy_cm_clk32k>,
<&sys_clkin>,
<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
- clock-names = "wkupclk",
+ clock-names = "wkupclk",
"sysclk",
"refclk";
#phy-cells = <0>;
regulators {
regulator-v3 {
- regulator-compatible= "V3(DCDC)";
+ regulator-compatible = "V3(DCDC)";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1800000>;
};
regulator-v4 {
- regulator-compatible= "V4(DCDC)";
+ regulator-compatible = "V4(DCDC)";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1800000>;
};
regulator-v5 {
- regulator-compatible= "V5(LDO)";
+ regulator-compatible = "V5(LDO)";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2000000>;
};
reg_vcc_sdio: regulator-v6 {
- regulator-compatible= "V6(LDO)";
+ regulator-compatible = "V6(LDO)";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator-v7 {
- regulator-compatible= "V7(LDO)";
+ regulator-compatible = "V7(LDO)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
};
gpio@150 {
- dragon_ethernet_gpios: ethernet-gpios {
+ dragon_ethernet_gpios: ethernet-state {
pinconf {
pins = "gpio7";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_bmp085_gpios: bmp085-gpios {
+ dragon_bmp085_gpios: bmp085-state {
pinconf {
pins = "gpio16";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_mpu3050_gpios: mpu3050-gpios {
+ dragon_mpu3050_gpios: mpu3050-state {
pinconf {
pins = "gpio17";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_sdcc3_gpios: sdcc3-gpios {
+ dragon_sdcc3_gpios: sdcc3-state {
pinconf {
pins = "gpio22";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_sdcc5_gpios: sdcc5-gpios {
+ dragon_sdcc5_gpios: sdcc5-state {
pinconf {
pins = "gpio26";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_ak8975_gpios: ak8975-gpios {
+ dragon_ak8975_gpios: ak8975-state {
pinconf {
pins = "gpio33";
function = "normal";
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_cm3605_gpios: cm3605-gpios {
+ dragon_cm3605_gpios: cm3605-state {
/* Pin 34 connected to the proxy IRQ */
- pinconf_gpio34 {
+ gpio34-pins {
pins = "gpio34";
function = "normal";
input-enable;
power-source = <PM8058_GPIO_S3>;
};
/* Pin 35 connected to ASET */
- pinconf_gpio35 {
+ gpio35-pins {
pins = "gpio35";
function = "normal";
output-high;
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_veth_gpios: veth-gpios {
+ dragon_veth_gpios: veth-state {
pinconf {
pins = "gpio40";
function = "normal";
compatible = "qcom,pm8058-led";
reg = <0x131>;
label = "pm8058:red";
+ color = <LED_COLOR_ID_RED>;
default-state = "off";
};
led@132 {
compatible = "qcom,pm8058-led";
reg = <0x132>;
label = "pm8058:yellow";
+ color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
linux,default-trigger = "mmc0";
};
compatible = "qcom,pm8058-led";
reg = <0x133>;
label = "pm8058:green";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
ramoops@88d00000{
compatible = "ramoops";
reg = <0x88d00000 0x100000>;
- record-size = <0x00020000>;
- console-size = <0x00020000>;
- ftrace-size = <0x00020000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
};
};
gpio-keys {
compatible = "gpio-keys";
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEUP>;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEDOWN>;
* tabla2x-slim-VDDIO_CDC
*/
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
};
};
- imem@2a03f000 {
- compatible = "syscon", "simple-mfd";
+ sram@2a03f000 {
+ compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
reg = <0x2a03f000 0x1000>;
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x65c>;
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
};
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
- wlan_default_gpios: wlan-gpios {
- pios {
+ wlan_default_gpios: wlan-gpios-state {
+ pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
led@1 {
label = "apq8064:green:user1";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
};
sata0: sata@29000000 {
- status = "okay";
- target-supply = <&pm8921_s4>;
+ status = "okay";
+ target-supply = <&pm8921_s4>;
};
/* OTG */
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
- wlan_default_gpios: wlan-gpios {
- pios {
+ wlan_default_gpios: wlan-gpios-state {
+ pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
};
};
- notify_led: nled {
- pios {
+ notify_led: nled-state {
+ pinconf {
pins = "gpio18";
function = "normal";
bias-disable;
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
- hdmi-mux-supply = <&ext_3p3v>;
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
- gpio_keys_pin_a: gpio-keys-pin-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 7>;
+ thermal-sensors = <&tsens 7>;
coefficients = <1199 0>;
trips {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 8>;
+ thermal-sensors = <&tsens 8>;
coefficients = <1132 0>;
trips {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 9>;
+ thermal-sensors = <&tsens 9>;
coefficients = <1199 0>;
trips {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 10>;
+ thermal-sensors = <&tsens 10>;
coefficients = <1132 0>;
trips {
firmware {
scm {
- compatible = "qcom,scm-apq8064";
+ compatible = "qcom,scm-apq8064", "qcom,scm";
clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
clock-names = "core";
};
sps_sic_non_secure: sps-sic-non-secure@12100000 {
- compatible = "syscon";
- reg = <0x12100000 0x10000>;
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
};
gsbi1: gsbi@12440000 {
};
qfprom: qfprom@700000 {
- compatible = "qcom,qfprom";
- reg = <0x00700000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
+ compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
+ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
- tsens_calib: calib {
+ tsens_calib: calib@404 {
reg = <0x404 0x10>;
};
- tsens_backup: backup_calib {
+ tsens_backup: backup_calib@414 {
reg = <0x414 0x10>;
};
};
gcc: clock-controller@900000 {
- compatible = "qcom,gcc-apq8064";
+ compatible = "qcom,gcc-apq8064", "syscon";
reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
- #thermal-sensor-cells = <1>;
+
+ tsens: thermal-sensor {
+ compatible = "qcom,msm8960-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
};
lcc: clock-controller@28000000 {
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
};
rpm@108000 {
- compatible = "qcom,rpm-apq8064";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
+ compatible = "qcom,rpm-apq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
+ compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
#clock-cells = <1>;
+ clocks = <&pxo_board>, <&cxo_board>;
+ clock-names = "pxo", "cxo";
};
regulators {
};
sata_phy0: phy@1b400000 {
- compatible = "qcom,apq8064-sata-phy";
- status = "disabled";
- reg = <0x1b400000 0x200>;
- reg-names = "phy_mem";
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
- #phy-cells = <0>;
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
};
sata0: sata@29000000 {
- compatible = "qcom,apq8064-ahci", "generic-ahci";
- status = "disabled";
- reg = <0x29000000 0x180>;
- interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_iface",
- "iface",
- "bus",
- "rxoob",
- "core_pmalive";
-
- assigned-clocks = <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
-
- phys = <&sata_phy0>;
- phy-names = "sata-phy";
- ports-implemented = <0x1>;
+ compatible = "qcom,apq8064-ahci", "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
- pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pins>;
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
no-1-8-v;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
sdcc4: mmc@121c0000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x121c0000 0x2000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x121c0000 0x2000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
syscon-sfpb = <&mmss_sfpb>;
phys = <&dsi0_phy>;
phy-names = "dsi";
+ status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
<0x04700300 0x200>,
<0x04700500 0x5c>;
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
- clock-names = "iface_clk", "ref";
+ clock-names = "iface", "ref";
clocks = <&mmcc DSI_M_AHB_CLK>,
<&pxo_board>;
+ status = "disabled";
};
"slave_iface";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
ports {
#address-cells = <1>;
firmware {
scm {
- compatible = "qcom,scm";
+ compatible = "qcom,scm-apq8084", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
qfprom: qfprom@fc4bc000 {
+ compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
+ reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "qcom,qfprom";
- reg = <0xfc4bc000 0x1000>;
tsens_calib: calib@d0 {
reg = <0xd0 0x18>;
};
status = "disabled";
};
- sdhci@f9824900 {
+ mmc@f9824900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
status = "disabled";
};
- sdhci@f98a4900 {
+ mmc@f98a4900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
power {
label = "ap120c-ac:green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "ap120c-ac:green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
support {
label = "ap120c-ac:green:support";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
status: status {
label = "ap120c-ac:blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan2g {
label = "ap120c-ac:green:wlan2g";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "ap120c-ac:red:wlan5g";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- compatible = "n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <24000000>;
};
};
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- compatible = "n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <24000000>;
};
};
firmware {
scm {
- compatible = "qcom,scm-ipq4019";
+ compatible = "qcom,scm-ipq4019", "qcom,scm";
};
};
status = "disabled";
};
- sdhci: sdhci@7824900 {
+ sdhci: mmc@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
soc {
pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
buttons_pins: buttons_pins {
mux {
pins = "gpio54", "gpio65";
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "MikroTik RB3011UiAS-RM";
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
led@7 {
label = "rb3011:green:user";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
mdio1_pins: mdio1_pins {
mux {
pins = "gpio10", "gpio11";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+&rpm {
+ smb208_regulators: regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
status = "okay";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button-1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
- button@2 {
+ button-2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
led@9 {
label = "status_led_fail";
+ function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@53 {
label = "status_led_pass";
+ function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
smem: smem@41000000 {
+ compatible = "qcom,smem";
reg = <0x41000000 0x200000>;
no-map;
+
+ hwlocks = <&sfpb_mutex 3>;
};
};
};
};
+ i2c4_pins: i2c4-default {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
pullups {
pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
bias-pull-up;
};
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
bias-bus-hold;
};
};
+
+ mdio0_pins: mdio0-pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2-pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
intc: interrupt-controller@2000000 {
regulator;
};
+ gsbi1: gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12440000 0x100>;
+ cell-index = <1>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ status = "disabled";
+
+ gsbi1_serial: serial@12450000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12450000 0x100>,
+ <0x12400000 0x03>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+
+ status = "disabled";
+ };
+
+ gsbi1_i2c: i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
status = "disabled";
};
- i2c@124a0000 {
+ gsbi2_i2c: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
};
};
+ gsbi6: gsbi@16500000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16500000 0x100>;
+ cell-index = <6>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ status = "disabled";
+
+ gsbi6_i2c: i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ gsbi6_spi: spi@16580000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
clock-names = "core", "iface";
status = "disabled";
};
+
+ gsbi7_i2c: i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
};
rng@1a500000 {
};
qfprom: qfprom@700000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ speedbin_efuse: speedbin@c0 {
+ reg = <0xc0 0x4>;
+ };
tsens_calib: calib@400 {
reg = <0x400 0xb>;
};
rpmcc: clock-controller {
compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
#clock-cells = <1>;
+ clocks = <&pxo_board>;
+ clock-names = "pxo";
};
};
l2cc: clock-controller@2011000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
- clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
clock-names = "pll8_vote", "pxo";
clock-output-names = "acpu_l2_aux";
};
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
gmac0: ethernet@37000000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37000000 0x200000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac1: ethernet@37200000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37200000 0x200000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac2: ethernet@37400000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37400000 0x200000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac3: ethernet@37600000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37600000 0x200000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&gcc USB30_1_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
+
+ status = "disabled";
};
ss_phy_1: phy@110f8830 {
clocks = <&gcc USB30_1_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
+
+ status = "disabled";
};
usb3_1: usb3@110f8800 {
ranges;
sdcc1: mmc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;
dma-names = "tx", "rx";
};
};
+
+ sfpb_mutex: hwlock@1200600 {
+ compatible = "qcom,sfpb-mutex";
+ reg = <0x01200600 0x100>;
+
+ #hwlock-cells = <1>;
+ };
};
};
};
&pmicgpio {
- usb_vbus_5v_pins: usb_vbus_5v_pins {
+ usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
output-high;
pmicgpio: gpio@150 {
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+ reg = <0x150>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8018-regulators";
reg = <0xf9011000 0x1000>;
};
- sdhc_1: sdhci@f9824900 {
+ sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
status = "disabled";
};
- sdhc_2: sdhci@f98a4900 {
+ sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
status = "disabled";
};
- sdhc_3: sdhci@f9864900 {
+ sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
clock-frequency = <19200000>;
};
- pxo_board {
+ pxo_board: pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
l2cc: clock-controller@2082000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x02082000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x02082000 0x1000>;
};
rpm: rpm@104000 {
- compatible = "qcom,rpm-msm8660";
- reg = <0x00104000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
-
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ compatible = "qcom,rpm-msm8660";
+ reg = <0x00104000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
clock-names = "ram";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
+ compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
#clock-cells = <1>;
+ clocks = <&pxo_board>;
+ clock-names = "pxo";
};
pm8901-regulators {
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x8000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <48000000>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc2: mmc@12140000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12140000 0x8000>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <48000000>;
+ reg = <0x12140000 0x8000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x8000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
no-1-8-v;
};
sdcc4: mmc@121c0000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x121c0000 0x8000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
- max-frequency = <48000000>;
+ status = "disabled";
+ reg = <0x121c0000 0x8000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc5: mmc@12200000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12200000 0x8000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12200000 0x8000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
};
};
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
};
rpm@108000 {
- compatible = "qcom,rpm-msm8960";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x8000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x8000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3";
function = "normal";
power-source = <PM8941_GPIO_S3>;
};
- fuelgauge_pin: fuelgauge-int {
+ fuelgauge_pin: fuelgauge-int-state {
pins = "gpio9";
function = "normal";
power-source = <PM8941_GPIO_S3>;
};
- wlan_sleep_clk_pin: wl-sleep-clk {
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio16";
function = "func2";
power-source = <PM8941_GPIO_S3>;
};
- wlan_regulator_pin: wl-reg-active {
+ wlan_regulator_pin: wl-reg-active-state {
pins = "gpio17";
function = "normal";
};
};
+&pm8941_lpg {
+ status = "okay";
+
+ qcom,power-source = <1>;
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
&rpm_requests {
pm8841-regulators {
compatible = "qcom,rpm-pm8841-regulators";
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio4", "gpio5";
function = "normal";
};
};
+&pm8941_lpg {
+ status = "okay";
+
+ qcom,power-source = <1>;
+
+ rgb-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&pm8941_wled {
status = "okay";
firmware {
scm {
- compatible = "qcom,scm";
+ compatible = "qcom,scm-msm8974", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
- sdhc_1: sdhci@f9824900 {
+ sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
status = "disabled";
};
- sdhc_3: sdhci@f9864900 {
+ sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
status = "disabled";
};
- sdhc_2: sdhci@f98a4900 {
+ sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
blsp2_uart1: serial@f995d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995d000 0x1000>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
};
qfprom: qfprom@fc4bc000 {
+ compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+ reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "qcom,qfprom";
- reg = <0xfc4bc000 0x1000>;
tsens_calib: calib@d0 {
reg = <0xd0 0x18>;
};
#interrupt-cells = <4>;
};
+ bam_dmux_dma: dma-controller@fc834000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xfc834000 0x7000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ num-channels = <6>;
+ qcom,num-ees = <1>;
+ qcom,powered-remotely;
+ };
+
remoteproc_mss: remoteproc@fc880000 {
compatible = "qcom,msm8974-mss-pil";
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ status = "disabled";
+
mba {
memory-region = <&mba_region>;
};
memory-region = <&mpss_region>;
};
+ bam_dmux: bam-dmux {
+ compatible = "qcom,bam-dmux";
+
+ interrupt-parent = <&modem_smsm>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pc", "pc-ack";
+
+ qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+ qcom,smem-state-names = "pc", "pc-ack";
+
+ dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+ dma-names = "tx", "rx";
+ };
+
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
- gpu_opp_table: opp_table {
+ gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-320000000 {
};
};
- ocmem@fdd00000 {
+ sram@fdd00000 {
compatible = "qcom,msm8974-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x180000>;
reg-names = "ctrl", "mem";
+ ranges = <0 0xfec00000 0x180000>;
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
clock-names = "core", "iface";
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ status = "disabled";
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
};
};
- imem: imem@fe805000 {
- compatible = "syscon", "simple-mfd";
+ imem: sram@fe805000 {
+ compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
reboot-mode {
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
&imem {
reboot-mode {
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio1", "gpio2", "gpio5";
function = "normal";
};
};
+&pm8941_lpg {
+ status = "okay";
+
+ qcom,power-source = <1>;
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
&pronto {
status = "okay";
};
&remoteproc_adsp {
+ status = "okay";
cx-supply = <&pm8841_s2>;
};
&remoteproc_mss {
+ status = "okay";
cx-supply = <&pm8841_s2>;
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- home-key {
+ key-home {
label = "home_key";
gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
&pma8084_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
power-source = <PMA8084_GPIO_S4>;
};
- touchkey_pin: touchkey-int-pin {
+ touchkey_pin: touchkey-int-state {
pins = "gpio6";
function = "normal";
bias-disable;
power-source = <PMA8084_GPIO_S4>;
};
- touch_pin: touchscreen-int-pin {
+ touch_pin: touchscreen-int-state {
pins = "gpio8";
function = "normal";
bias-disable;
power-source = <PMA8084_GPIO_S4>;
};
- panel_en_pin: panel-en-pin {
+ panel_en_pin: panel-en-state {
pins = "gpio14";
function = "normal";
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- wlan_sleep_clk_pin: wlan-sleep-clk-pin {
+ wlan_sleep_clk_pin: wlan-sleep-clk-state {
pins = "gpio16";
function = "func2";
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- panel_rst_pin: panel-rst-pin {
+ panel_rst_pin: panel-rst-state {
pins = "gpio17";
function = "normal";
bias-disable;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- fuelgauge_pin: fuelgauge-int-pin {
+ fuelgauge_pin: fuelgauge-int-state {
pins = "gpio21";
function = "normal";
bias-disable;
};
&remoteproc_adsp {
+ status = "okay";
cx-supply = <&pma8084_s2>;
};
&remoteproc_mss {
+ status = "okay";
cx-supply = <&pma8084_s2>;
mss-supply = <&pma8084_s6>;
mx-supply = <&pma8084_s1>;
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio5";
function = "normal";
power-source = <PM8941_GPIO_S3>;
};
- bt_reg_on_pin: bt-reg-on {
+ bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
power-source = <PM8941_GPIO_S3>;
};
- wlan_sleep_clk_pin: wl-sleep-clk {
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
power-source = <PM8941_GPIO_S3>;
};
- wlan_regulator_pin: wl-reg-active {
+ wlan_regulator_pin: wl-reg-active-state {
pins = "gpio18";
function = "normal";
power-source = <PM8941_GPIO_S3>;
};
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
pins = "gpio20";
function = "normal";
};
+&pm8941_lpg {
+ status = "okay";
+
+ qcom,power-source = <1>;
+
+ rgb-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&rpm_requests {
pm8941-regulators {
compatible = "qcom,rpm-pm8941-regulators";
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
};
};
interrupt-controller;
#interrupt-cells = <2>;
- boost_bypass_n_pin: boost-bypass {
+ boost_bypass_n_pin: boost-bypass-state {
pins = "gpio21";
function = "normal";
};
#address-cells = <1>;
#size-cells = <0>;
+ pm8941_lpg: lpg {
+ compatible = "qcom,pm8941-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pm8941_wled: wled@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800>;
compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pmx55_gpios 0 0 11>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pmx65_gpios: pinctrl@8800 {
- compatible = "qcom,pmx65-gpio";
+ compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pmx65_gpios 0 0 16>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_uart3: serial@831000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x00831000 0x200>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc 30>,
<&gcc 9>;
clock-names = "core", "iface";
reg = <0x01fc0000 0x1000>;
};
- sdhc_1: sdhci@8804000 {
+ sdhc_1: mmc@8804000 {
compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
reg = <0x08804000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
#interrupt-cells = <2>;
};
- imem@1468f000 {
- compatible = "simple-mfd";
+ sram@1468f000 {
+ compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
reg = <0x1468f000 0x1000>;
#address-cells = <1>;
};
};
-&blsp1_uart3 {
- status = "ok";
-};
-
&apps_rsc {
pmx65-rpmh-regulators {
compatible = "qcom,pmx65-rpmh-regulators";
regulator-max-microvolt = <1300000>;
};
- ldo1 {
+ vreg_l1b_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo4 {
+ vreg_l4b_0p88: ldo4 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo5 {
+ vreg_l5b_1p8: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo10 {
+ vreg_l10b_3p08: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* ico and efs2 partitions are secured */
+ secure-regions = /bits/ 64 <0x500000 0x500000
+ 0xa00000 0xb00000>;
+ };
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ memory-region = <&mpss_adsp_mem>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4b_0p88>;
+ vdda33-supply = <&vreg_l10b_3p08>;
+ vdda18-supply = <&vreg_l5b_1p8>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+};
clock-output-names = "sleep_clk";
#clock-cells = <0>;
};
+
+ nand_clk_dummy: nand-clk-dummy {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
};
cpus {
compatible = "arm,cortex-a7";
reg = <0x0>;
enable-method = "psci";
+ clocks = <&apcs>;
+ power-domains = <&rpmhpd SDX65_CX_AO>;
+ power-domain-names = "rpmhpd";
+ operating-points-v2 = <&cpu_opp_table>;
};
};
+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-345600000 {
+ opp-hz = /bits/ 64 <345600000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-sdx65", "qcom,scm";
+ };
+ };
+
+ mc_virt: interconnect-mc-virt {
+ compatible = "qcom,sdx65-mc-virt";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
smem_mem: memory@8fe20000 {
- no-map;
+ compatible = "qcom,smem";
reg = <0x8fe20000 0xc0000>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
};
cmd_db: reserved-memory@8fee0000 {
};
};
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
status = "disabled";
};
+ usb_hsphy: phy@ff4000 {
+ compatible = "qcom,usb-snps-hs-7nm-phy";
+ reg = <0xff4000 0x120>;
+ #phy-cells = <0>;
+ status = "disabled";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c8>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6e00 0x160>,
+ <0x00ff7000 0x1ec>,
+ <0x00ff6200 0x1e00>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sdx65-system-noc";
+ reg = <0x01620000 0x31200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ qpic_bam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x01b04000 0x1c000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
+ qpic_nand: nand-controller@1b30000 {
+ compatible = "qcom,sdx55-nand";
+ reg = <0x01b30000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>,
+ <&nand_clk_dummy>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
#hwlock-cells = <1>;
};
- sdhc_1: sdhci@8804000 {
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sdx55-mpss-pas";
+ reg = <0x04080000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SDX65_CX>,
+ <&rpmhpd SDX65_MSS>;
+ power-domain-names = "cx", "mss";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+ label = "mpss";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs 15>;
+ };
+ };
+
+ sdhc_1: mmc@8804000 {
compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
reg = <0x08804000 0x1000>;
reg-names = "hc_mem";
status = "disabled";
};
+ mem_noc: interconnect@9680000 {
+ compatible = "qcom,sdx65-mem-noc";
+ reg = <0x09680000 0x27200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ restart@c264000 {
+ compatible = "qcom,pshold";
+ reg = <0x0c264000 0x1000>;
+ };
+
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
interrupt-controller;
};
+ imem@1468f000 {
+ compatible = "simple-mfd";
+ reg = <0x1468f000 0x1000>;
+ ranges = <0x0 0x1468f000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
#clock-cells = <0>;
};
+ watchdog@17817000 {
+ compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+ reg = <0x17817000 0x1000>;
+ clocks = <&sleep_clk>;
+ };
+
timer@17820000 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
};
};
leds {
compatible = "gpio-leds";
- red {
+ led-red {
gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for the AA104XD12 panel connected to Renesas R-Car boards
- *
- * Copyright (C) 2014 Renesas Electronics Corp.
- */
-
-/ {
- panel {
- compatible = "mitsubishi,aa104xd12", "panel-lvds";
-
- width-mm = <210>;
- height-mm = <158>;
- data-mapping = "jeida-18";
-
- panel-timing {
- /* 1024x768 @65Hz */
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hsync-len = <136>;
- hfront-porch = <20>;
- hback-porch = <160>;
- vfront-porch = <3>;
- vback-porch = <29>;
- vsync-len = <6>;
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lvds_connector>;
- };
- };
- };
-};
-
-&lvds_connector {
- remote-endpoint = <&panel_in>;
-};
/dts-v1/;
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
+
#include "r9a06g032.dtsi"
/ {
};
};
+ð_miic {
+ status = "okay";
+ renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mii_conv4 {
+ renesas,miic-input = <MIIC_SWITCH_PORTB>;
+ status = "okay";
+};
+
+&mii_conv5 {
+ renesas,miic-input = <MIIC_SWITCH_PORTA>;
+ status = "okay";
+};
+
+&pinctrl{
+ pins_eth3: pins_eth3 {
+ pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ pins_eth4: pins_eth4 {
+ pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+ <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ pins_mdio1: pins_mdio1 {
+ pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
+ <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
+ };
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
+
+ dsa,member = <0 0>;
+
+ mdio {
+ clock-frequency = <2500000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <4>;
+ micrel,led-mode = <1>;
+ };
+
+ switch0phy5: ethernet-phy@5 {
+ reg = <5>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&switch_port0 {
+ label = "lan0";
+ phy-mode = "mii";
+ phy-handle = <&switch0phy5>;
+ status = "okay";
+};
+
+&switch_port1 {
+ label = "lan1";
+ phy-mode = "mii";
+ phy-handle = <&switch0phy4>;
+ status = "okay";
+};
+
+&switch_port4 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
data-width = <8>;
};
+ gmac2: ethernet@44002000 {
+ compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+ reg = <0x44002000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
+ clock-names = "stmmaceth";
+ power-domains = <&sysctrl>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
+ status = "disabled";
+ };
+
+ eth_miic: eth-miic@44030000 {
+ compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x44030000 0x10000>;
+ clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+ <&sysctrl R9A06G032_CLK_RGMII_REF>,
+ <&sysctrl R9A06G032_CLK_RMII_REF>,
+ <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+ clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+ power-domains = <&sysctrl>;
+ status = "disabled";
+
+ mii_conv1: mii-conv@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ mii_conv2: mii-conv@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ mii_conv3: mii-conv@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ mii_conv4: mii-conv@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+
+ mii_conv5: mii-conv@5 {
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ switch: switch@44050000 {
+ compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+ reg = <0x44050000 0x10000>;
+ clocks = <&sysctrl R9A06G032_HCLK_SWITCH>,
+ <&sysctrl R9A06G032_CLK_SWITCH>;
+ clock-names = "hclk", "clk";
+ power-domains = <&sysctrl>;
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch_port0: port@0 {
+ reg = <0>;
+ pcs-handle = <&mii_conv5>;
+ status = "disabled";
+ };
+
+ switch_port1: port@1 {
+ reg = <1>;
+ pcs-handle = <&mii_conv4>;
+ status = "disabled";
+ };
+
+ switch_port2: port@2 {
+ reg = <2>;
+ pcs-handle = <&mii_conv3>;
+ status = "disabled";
+ };
+
+ switch_port3: port@3 {
+ reg = <3>;
+ pcs-handle = <&mii_conv2>;
+ status = "disabled";
+ };
+
+ switch_port4: port@4 {
+ reg = <4>;
+ ethernet = <&gmac2>;
+ label = "cpu";
+ phy-mode = "internal";
+ status = "disabled";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller@44101000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
interrupt-controller;
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
wakeup-source;
debounce-interval = <100>;
};
- volume-down {
+ key-volume-down {
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
status = "okay";
};
+&nfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "rk-nand";
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <40>;
+ nand-is-boot-medium;
+ rockchip,boot-blks = <8>;
+ rockchip,boot-ecc-strength = <24>;
+ };
+};
+
&pinctrl {
usb-host {
host_drv: host-drv {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key &usb_int>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
wakeup-source;
};
- wake_on_usb: wake-on-usb {
+ wake_on_usb: key-wake-on-usb {
label = "Wake-on-USB";
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
regulator-boot-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
pinctrl-names = "default";
pinctrl-0 = <&user_button_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- button@0 {
+ button {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
<&bt_dev_wake>;
compatible = "brcm,bcm43540-bt";
- host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- max-speed = <3000000>;
- brcm,bt-pcm-int-params = [01 02 00 01 01];
+ host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+ brcm,bt-pcm-int-params = [01 02 00 01 01];
};
};
pinctrl-names = "default";
pinctrl-0 = <&ap_lid_int_l>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&volum_down_l &volum_up_l>;
- volum_down {
+ key-volum-down {
label = "Volum_down";
gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
- volum_up {
+ key-volum-up {
label = "Volum_up";
gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
regulators {
vdd_core: DCDC_REG1 {
- regulator-name= "vdd_core";
+ regulator-name = "vdd_core";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vdd_buck2: DCDC_REG2 {
- regulator-name= "vdd_buck2";
+ regulator-name = "vdd_buck2";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-always-on;
};
vcc_ddr: DCDC_REG3 {
- regulator-name= "vcc_ddr";
+ regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
};
vcc_io: DCDC_REG4 {
- regulator-name= "vcc_io";
+ regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_10: LDO_REG1 {
- regulator-name= "vdd_10";
+ regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcc_18: LDO_REG2 {
- regulator-name= "vcc_18";
+ regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd10_pmu: LDO_REG3 {
- regulator-name= "vdd10_pmu";
+ regulator-name = "vdd10_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulators {
vdd_core: DCDC_REG1 {
- regulator-name= "vdd_core";
+ regulator-name = "vdd_core";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vdd_cam: DCDC_REG2 {
- regulator-name= "vdd_cam";
+ regulator-name = "vdd_cam";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <2000000>;
regulator-state-mem {
};
vcc_ddr: DCDC_REG3 {
- regulator-name= "vcc_ddr";
+ regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
};
vcc_io: DCDC_REG4 {
- regulator-name= "vcc_io";
+ regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_10: LDO_REG1 {
- regulator-name= "vdd_10";
+ regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcc_18: LDO_REG2 {
- regulator-name= "vcc_18";
+ regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd10_pmu: LDO_REG3 {
- regulator-name= "vdd10_pmu";
+ regulator-name = "vdd10_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
gmac {
rmii_pins: rmii-pins {
- rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
+ rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
<1 RK_PC3 2 &pcfg_pull_none>,
<1 RK_PC4 2 &pcfg_pull_none>,
<1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C2410 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+
+#define S3C2410_PIN_FUNC_INPUT 0
+#define S3C2410_PIN_FUNC_OUTPUT 1
+#define S3C2410_PIN_FUNC_2 2
+#define S3C2410_PIN_FUNC_3 3
+
+#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c2410-pinctrl.h"
&pinctrl_0 {
/*
uart0_data: uart0-data-pins {
samsung,pins = "gph-0", "gph-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gph-8", "gph-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart1_data: uart1-data-pins {
samsung,pins = "gph-2", "gph-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gph-10", "gph-11";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart2_data: uart2-data-pins {
samsung,pins = "gph-4", "gph-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart2_fctl: uart2-fctl-pins {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
uart3_data: uart3-data-pins {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
extuart_clk: extuart-clk-pins {
samsung,pins = "gph-12";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpe-14", "gpe-15";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
spi0_bus: spi0-bus-pins {
samsung,pins = "gpe-11", "gpe-12", "gpe-13";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd0_clk: sd0-clk-pins {
samsung,pins = "gpe-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpe-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpe-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpe-8", "gpe-9", "gpe-10";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpl-8";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd1_clk: sd1-clk-pins {
samsung,pins = "gpl-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd1_bus1: sd1-bus1-pins {
samsung,pins = "gpl-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
sd1_bus4: sd1-bus4-pins {
samsung,pins = "gpl-1", "gpl-2", "gpl-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C2410_PIN_FUNC_2>;
};
};
status = "disabled";
};
- sdhci_1: sdhci@4ac00000 {
+ sdhci_1: mmc@4ac00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
status = "disabled";
};
- sdhci_0: sdhci@4a800000 {
+ sdhci_0: mmc@4a800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
* listed as device tree nodes in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c64xx-pinctrl.h"
&pinctrl0 {
/*
uart0_data: uart0-data-pins {
samsung,pins = "gpa-0", "gpa-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa-2", "gpa-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data-pins {
samsung,pins = "gpa-4", "gpa-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa-6", "gpa-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data-pins {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data-pins {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0-pins {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1-pins {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0-pins {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1-pins {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw-pins {
samsung,pins = "gpb-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb-5", "gpb-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus-pins {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_6>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus-pins {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs-pins {
samsung,pins = "gpc-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus-pins {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs-pins {
samsung,pins = "gpc-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk-pins {
samsung,pins = "gpg-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpg-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd-pins {
samsung,pins = "gpg-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gph-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk-pins {
samsung,pins = "gph-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1-pins {
samsung,pins = "gph-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd-pins {
samsung,pins = "gpg-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk-pins {
samsung,pins = "gpc-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1-pins {
samsung,pins = "gph-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4-pins {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk-pins {
samsung,pins = "gpd-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk-pins {
samsung,pins = "gpe-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
/* S3C6410-only */
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk-pins {
/* S3C6410-only */
samsung,pins = "gph-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk-pins {
samsung,pins = "gpd-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk-pins {
samsung,pins = "gpe-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0-pins {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1-pins {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst-pins {
samsung,pins = "gpf-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field-pins {
/* S3C6410-only */
samsung,pins = "gpb-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk-pins {
samsung,pins = "gpf-13";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out-pins {
samsung,pins = "gpf-14";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out-pins {
samsung,pins = "gpf-15";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0-pins {
samsung,pins = "gpf-14";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0-pins {
samsung,pins = "gph-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0-pins {
samsung,pins = "gph-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0-pins {
samsung,pins = "gph-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0-pins {
samsung,pins = "gph-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0-pins {
samsung,pins = "gph-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0-pins {
samsung,pins = "gph-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0-pins {
samsung,pins = "gph-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0-pins {
samsung,pins = "gph-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1-pins {
samsung,pins = "gpl-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1-pins {
samsung,pins = "gpl-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1-pins {
samsung,pins = "gpl-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1-pins {
samsung,pins = "gpl-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1-pins {
samsung,pins = "gpl-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1-pins {
samsung,pins = "gpl-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1-pins {
samsung,pins = "gpl-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1-pins {
samsung,pins = "gpl-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0-pins {
samsung,pins = "gpk-8";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0-pins {
samsung,pins = "gpk-9";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0-pins {
samsung,pins = "gpk-10";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0-pins {
samsung,pins = "gpk-11";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0-pins {
samsung,pins = "gpk-12";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0-pins {
samsung,pins = "gpk-13";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0-pins {
samsung,pins = "gpk-14";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0-pins {
samsung,pins = "gpk-15";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1-pins {
samsung,pins = "gpn-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1-pins {
samsung,pins = "gpn-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1-pins {
samsung,pins = "gpn-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1-pins {
samsung,pins = "gpn-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1-pins {
samsung,pins = "gpn-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1-pins {
samsung,pins = "gpn-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1-pins {
samsung,pins = "gpn-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1-pins {
samsung,pins = "gpn-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
"gpi-7", "gpi-10", "gpi-11", "gpi-12",
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus-pins {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C64xx DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+
+#define S3C64XX_PIN_PULL_NONE 0
+#define S3C64XX_PIN_PULL_DOWN 1
+#define S3C64XX_PIN_PULL_UP 2
+
+#define S3C64XX_PIN_FUNC_INPUT 0
+#define S3C64XX_PIN_FUNC_OUTPUT 1
+#define S3C64XX_PIN_FUNC_2 2
+#define S3C64XX_PIN_FUNC_3 3
+#define S3C64XX_PIN_FUNC_4 4
+#define S3C64XX_PIN_FUNC_5 5
+#define S3C64XX_PIN_FUNC_6 6
+#define S3C64XX_PIN_FUNC_EINT 7
+
+#endif /* __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ */
#interrupt-cells = <1>;
};
- sdhci0: sdhci@7c200000 {
+ sdhci0: mmc@7c200000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x7c200000 0x100>;
interrupt-parent = <&vic1>;
status = "disabled";
};
- sdhci1: sdhci@7c300000 {
+ sdhci1: mmc@7c300000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x7c300000 0x100>;
interrupt-parent = <&vic1>;
status = "disabled";
};
- sdhci2: sdhci@7c400000 {
+ sdhci2: mmc@7c400000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x7c400000 0x100>;
interrupt-parent = <&vic1>;
&pinctrl0 {
t_flash_detect: t-flash-detect-pins {
samsung,pins = "gph3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
};
&pinctrl0 {
bt_reset: bt-reset-pins {
samsung,pins = "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
wlan_bt_en: wlan-bt-en-pins {
samsung,pins = "gpb-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
samsung,pin-val = <1>;
};
codec_ldo: codec-ldo-pins {
samsung,pins = "gpf3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
prox_i2c_pins: gp2a-i2c-pins {
samsung,pins = "gpg0-2", "gpg2-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
wlan_gpio_rst: wlan-gpio-rst-pins {
samsung,pins = "gpg1-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
bt_wake: bt-wake-pins {
samsung,pins = "gpg3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
gp2a_irq: gp2a-irq-pins {
samsung,pins = "gph0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pmic_dvs_pins: pmic-dvs-pins {
samsung,pins = "gph0-3", "gph0-4", "gph0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
samsung,pin-val = <0>;
};
pmic_irq: pmic-irq-pins {
samsung,pins = "gph0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gph2-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
bt_host_wake: bt-host-wake-pins {
samsung,pins = "gph2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
musb_irq: musq-irq-pins {
samsung,pins = "gph2-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
tf_detect: tf-detect-pins {
samsung,pins = "gph3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
wifi_wake: wifi-wake-pins {
samsung,pins = "gph3-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
magnetometer_i2c_pins: yas529-i2c-pins-pins {
samsung,pins = "gpj0-0", "gpj0-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
ts_irq: ts-irq-pins {
samsung,pins = "gpj0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
vibrator_ena: vibrator-ena-pins {
samsung,pins = "gpj1-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
gp2a_power: gp2a-power-pins {
samsung,pins = "gpj1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
touchkey_i2c_pins: touchkey-i2c-pins {
samsung,pins = "gpj3-0", "gpj3-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
touchkey_vdd_ena: touchkey-vdd-ena-pins {
samsung,pins = "gpj3-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
musb_i2c_pins: musb-i2c-pins {
samsung,pins = "gpj3-4", "gpj3-5";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
accel_i2c_pins: accel-i2c-pins {
samsung,pins = "gpj3-6", "gpj3-7";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pmic_i2c_pins: pmic-i2c-pins-pins {
samsung,pins = "gpj4-0", "gpj4-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
touchkey_irq: touchkey-irq-pins {
samsung,pins = "gpj4-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
lcd_spi_pins: spi-lcd-pins {
samsung,pins = "mp01-1", "mp04-1", "mp04-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
fg_i2c_pins: fg-i2c-pins {
samsung,pins = "mp05-0", "mp05-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
sound_i2c_pins: sound-i2c-pins {
samsung,pins = "mp05-2", "mp05-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
panel_rst: panel-rst-pins {
samsung,pins = "mp05-5";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
};
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- vol-down {
+ key-vol-down {
label = "volume_down";
gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- vol-up {
+ key-vol-up {
label = "volume_up";
gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
fg_irq: fg-irq-pins {
samsung,pins = "gph3-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
headset_micbias_ena: headset-micbias-ena-pins {
samsung,pins = "gpj2-5";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
main_micbias_ena: main-micbias-ena-pins {
samsung,pins = "gpj4-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
/* Based on vendor kernel v2.6.35.7 */
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- vol-down {
+ key-vol-down {
label = "volume_down";
gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- vol-up {
+ key-vol-up {
label = "volume_up";
gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ key-home {
label = "home";
gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
fm_i2c_pins: fm-i2c-pins-pins {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
};
fm_irq: fm-irq-pins {
samsung,pins = "gpj2-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
fm_rst: fm-rst-pins {
samsung,pins = "gpj2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
massmemory_en: massmemory-en-pins {
samsung,pins = "gpj2-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
micbias_reg_ena: micbias-reg-ena-pins {
samsung,pins = "gpj4-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
/* Based on CyanogenMod 3.0.101 kernel */
* nodes can be added to this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s5pv210-pinctrl.h"
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
samsung,pins = #_pin; \
- samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \
- samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>; \
+ samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>; \
+ samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>; \
}
&pinctrl0 {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart3_data: uart3-data-pins {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
uart_audio: uart-audio-pins {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_5>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpd1-4", "gpd1-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row0: keypad-row-0-pins {
samsung,pins = "gph3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row1: keypad-row-1-pins {
samsung,pins = "gph3-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row2: keypad-row-2-pins {
samsung,pins = "gph3-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row3: keypad-row-3-pins {
samsung,pins = "gph3-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row4: keypad-row-4-pins {
samsung,pins = "gph3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row5: keypad-row-5-pins {
samsung,pins = "gph3-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row6: keypad-row-6-pins {
samsung,pins = "gph3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_row7: keypad-row-7-pins {
samsung,pins = "gph3-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col0: keypad-col-0-pins {
samsung,pins = "gph2-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col1: keypad-col-1-pins {
samsung,pins = "gph2-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col2: keypad-col-2-pins {
samsung,pins = "gph2-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col3: keypad-col-3-pins {
samsung,pins = "gph2-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col4: keypad-col-4-pins {
samsung,pins = "gph2-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col5: keypad-col-5-pins {
samsung,pins = "gph2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col6: keypad-col-6-pins {
samsung,pins = "gph2-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
keypad_col7: keypad-col-7-pins {
samsung,pins = "gph2-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
sd0_clk: sd0-clk-pins {
samsung,pins = "gpg0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd-pins {
samsung,pins = "gpg0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpg0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk-pins {
samsung,pins = "gpg1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpg1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd-pins {
samsung,pins = "gpg1-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpg1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk-pins {
samsung,pins = "gpg2-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpg2-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd-pins {
samsung,pins = "gpg2-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpg2-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk-pins {
samsung,pins = "gpg3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpg3-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd-pins {
samsung,pins = "gpg3-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpg3-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
eint0: ext-int0-pins {
samsung,pins = "gph0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
eint8: ext-int8-pins {
samsung,pins = "gph1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
eint15: ext-int15-pins {
samsung,pins = "gph1-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
eint16: ext-int16-pins {
samsung,pins = "gph2-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
eint31: ext-int31-pins {
samsung,pins = "gph3-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpe1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpe1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpj1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpj1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
lcd_data24: lcd-data-width24-pins {
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
};
};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S5PV210 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+
+#define S5PV210_PIN_PULL_NONE 0
+#define S5PV210_PIN_PULL_DOWN 1
+#define S5PV210_PIN_PULL_UP 2
+
+/* Pin function in power down mode */
+#define S5PV210_PIN_PDN_OUT0 0
+#define S5PV210_PIN_PDN_OUT1 1
+#define S5PV210_PIN_PDN_INPUT 2
+#define S5PV210_PIN_PDN_PREV 3
+
+#define S5PV210_PIN_DRV_LV1 0
+#define S5PV210_PIN_DRV_LV2 2
+#define S5PV210_PIN_DRV_LV3 1
+#define S5PV210_PIN_DRV_LV4 3
+
+#define S5PV210_PIN_FUNC_INPUT 0
+#define S5PV210_PIN_FUNC_OUTPUT 1
+#define S5PV210_PIN_FUNC_2 2
+#define S5PV210_PIN_FUNC_3 3
+#define S5PV210_PIN_FUNC_4 4
+#define S5PV210_PIN_FUNC_5 5
+#define S5PV210_PIN_FUNC_6 6
+#define S5PV210_PIN_FUNC_EINT 0xf
+#define S5PV210_PIN_FUNC_F S5PV210_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ */
status = "disabled";
};
- sdhci0: sdhci@eb000000 {
+ sdhci0: mmc@eb000000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb000000 0x100000>;
interrupt-parent = <&vic1>;
status = "disabled";
};
- sdhci1: sdhci@eb100000 {
+ sdhci1: mmc@eb100000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb100000 0x100000>;
interrupt-parent = <&vic1>;
status = "disabled";
};
- sdhci2: sdhci@eb200000 {
+ sdhci2: mmc@eb200000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb200000 0x100000>;
interrupt-parent = <&vic1>;
status = "disabled";
};
- sdhci3: sdhci@eb300000 {
+ sdhci3: mmc@eb300000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb300000 0x100000>;
interrupt-parent = <&vic3>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
#pwm-cells = <3>;
- status="disabled";
+ status = "disabled";
};
hlcdc: hlcdc@f8038000 {
clock-names = "td_slck", "md_slck", "main_xtal";
};
- reset_controller: rstc@fffffe00 {
+ reset_controller: reset-controller@fffffe00 {
compatible = "microchip,sam9x60-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32k 0>;
ranges = <0 0x00200000 0x20000>;
};
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
+ status = "disabled";
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */
66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
- #address-cells = <1>;
- #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
ranges = <0 0xf8044000 0x1420>;
};
- reset_controller: rstc@f8048000 {
+ reset_controller: reset-controller@f8048000 {
compatible = "atmel,sama5d3-rstc";
reg = <0xf8048000 0x10>;
clocks = <&clk32k>;
status = "disabled";
};
- resistive_touch: resistive-touch {
- compatible = "resistive-adc-touch";
- io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
- <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
- <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
- io-channel-names = "x", "y", "pressure";
- touchscreen-min-pressure = <50000>;
- status = "disabled";
- };
-
pioA: pinctrl@fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
clock-names = "slow_clk", "main_xtal";
};
- reset_controller: rstc@fffffe00 {
+ reset_controller: reset-controller@fffffe00 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32k>;
};
};
- reset_controller: rstc@fc068600 {
+ reset_controller: reset-controller@fc068600 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
clocks = <&clk32k>;
clock-names = "td_slck", "md_slck", "main_xtal";
};
+ reset_controller: reset-controller@e001d000 {
+ compatible = "microchip,sama7g5-rstc";
+ reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clk32k 0>;
+ };
+
shdwc: shdwc@e001d010 {
compatible = "microchip,sama7g5-shdwc", "syscon";
reg = <0xe001d010 0x10>;
#size-cells = <1>;
chosen {
- bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+ bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
};
aliases {
<37 IRQ_TYPE_LEVEL_HIGH>;
};
+ sdmmca-ecc@ff8c2c00 {
+ compatible = "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c2c00 0x400>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
dma-ecc@ff8c8000 {
compatible = "altr,socfpga-dma-ecc";
reg = <0xff8c8000 0x400>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+ model = "Google Chameleon V3";
+ compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+ "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ serial0 = &uart0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ ssm2603: audio-codec@1a {
+ compatible = "adi,ssm2603";
+ reg = <0x1a>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ u80: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SOM_AUD_MUTE",
+ "DP1_OUT_CEC_EN",
+ "DP2_OUT_CEC_EN",
+ "DP1_SOM_PS8469_CAD",
+ "DPD_SOM_PS8469_CAD",
+ "DP_OUT_PWR_EN",
+ "STM32_RST_L",
+ "STM32_BOOT0",
+
+ "FPGA_PROT",
+ "STM32_FPGA_COMM0",
+ "TP119",
+ "TP120",
+ "TP121",
+ "TP122",
+ "TP123",
+ "TP124";
+ };
+};
+
+&mmc {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "socfpga_arria10.dtsi"
-
-/ {
-
- model = "Enclustra Mercury AA1";
- compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
-
- aliases {
- ethernet0 = &gmac0;
- serial1 = &uart1;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- };
-
- memory@0 {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x80000000>; /* 2GB */
- };
-
- chosen {
- stdout-path = "serial1:115200n8";
- };
-};
-
-&eccmgr {
- sdmmca-ecc@ff8c2c00 {
- compatible = "altr,socfpga-sdmmc-ecc";
- reg = <0xff8c2c00 0x400>;
- altr,ecc-parent = <&mmc>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
- <47 IRQ_TYPE_LEVEL_HIGH>,
- <16 IRQ_TYPE_LEVEL_HIGH>,
- <48 IRQ_TYPE_LEVEL_HIGH>;
- };
-};
-
-&gmac0 {
- phy-mode = "rgmii";
- phy-addr = <0xffffffff>; /* probe for phy addr */
-
- max-frame-size = <3800>;
- status = "okay";
-
- phy-handle = <&phy3>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy3: ethernet-phy@3 {
- txd0-skew-ps = <0>; /* -420ps */
- txd1-skew-ps = <0>; /* -420ps */
- txd2-skew-ps = <0>; /* -420ps */
- txd3-skew-ps = <0>; /* -420ps */
- rxd0-skew-ps = <420>; /* 0ps */
- rxd1-skew-ps = <420>; /* 0ps */
- rxd2-skew-ps = <420>; /* 0ps */
- rxd3-skew-ps = <420>; /* 0ps */
- txen-skew-ps = <0>; /* -420ps */
- txc-skew-ps = <1860>; /* 960ps */
- rxdv-skew-ps = <420>; /* 0ps */
- rxc-skew-ps = <1680>; /* 780ps */
- reg = <3>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
- isl12022: isl12022@6f {
- status = "okay";
- compatible = "isil,isl12022";
- reg = <0x6f>;
- };
-};
-
-/* Following mappings are taken from arria10 socdk dts */
-&mmc {
- status = "okay";
- cap-sd-highspeed;
- broken-cd;
- bus-width = <4>;
-};
-
-&osc1 {
- clock-frequency = <33330000>;
-};
-
-&uart1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "host";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+ model = "Enclustra Mercury AA1";
+ compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ serial1 = &uart1;
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x80000000>; /* 2GB */
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+
+ max-frame-size = <3800>;
+
+ phy-handle = <&phy3>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy3: ethernet-phy@3 {
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ atsha204a: crypto@64 {
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
+
+ isl12022: isl12022@6f {
+ compatible = "isil,isl12022";
+ reg = <0x6f>;
+ };
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&osc1 {
+ clock-frequency = <33330000>;
+};
smi: flash@ea000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@e6000000 {
#address-cells = <1>;
smi: flash@ea000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@e6000000 {
#address-cells = <1>;
};
pwm: pwm@e0180000 {
- compatible ="st,spear13xx-pwm";
+ compatible = "st,spear13xx-pwm";
reg = <0xe0180000 0x1000>;
#pwm-cells = <2>;
status = "disabled";
smi: flash@fc000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@f8000000 {
#address-cells = <1>;
smi: flash@fc000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@f8000000 {
#address-cells = <1>;
smi: flash@fc000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@f8000000 {
#address-cells = <1>;
smi: flash@fc000000 {
status = "okay";
- clock-rate=<50000000>;
+ clock-rate = <50000000>;
flash@f8000000 {
#address-cells = <1>;
};
pwm: pwm@a8000000 {
- compatible ="st,spear-pwm";
+ compatible = "st,spear-pwm";
reg = <0xa8000000 0x1000>;
#pwm-cells = <2>;
status = "disabled";
"CH_WD_EXP",
"VBUS_CH_DROP_END";
monitored-battery = <&battery>;
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
io-channels = <&gpadc 0x03>,
<&gpadc 0x0a>,
<&gpadc 0x09>,
};
ab8500_chargalg {
- compatible = "stericsson,ab8500-chargalg";
- monitored-battery = <&battery>;
+ compatible = "stericsson,ab8500-chargalg";
+ monitored-battery = <&battery>;
};
ab8500_usb: phy {
#address-cells = <1>;
#size-cells = <0>;
- v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
#address-cells = <1>;
#size-cells = <0>;
- v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
- v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
- v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
- v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
* Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
*/
hrefv60_cfg1 {
- pins ="GPIO65_F1";
+ pins = "GPIO65_F1";
ste,config = <&gpio_out_hi>;
};
hrefv60_cfg2 {
- pins ="GPIO66_G3";
+ pins = "GPIO66_G3";
ste,config = <&gpio_out_lo>;
};
};
reg = <0x19>;
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
- mount-matrix = "0", "-1", "0",
- "1", "0", "0",
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
"0", "0", "1";
};
};
accelerometer@18 {
compatible = "bosch,bma222e";
reg = <0x18>;
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
"0", "0", "1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
accelerometer@8 {
compatible = "bosch,bma222";
reg = <0x08>;
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
"0", "0", "1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
};
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_core>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
miphy28lp_phy: miphy28lp {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
phy_port0: port@9b22000 {
};
st231_gp0: st231-gp0 {
- compatible = "st,st231-rproc";
- memory-region = <&gp0_reserved>;
- resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x22c>;
+ compatible = "st,st231-rproc";
+ memory-region = <&gp0_reserved>;
+ resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x22c>;
#mbox-cells = <1>;
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
st231_delta: st231-delta {
- compatible = "st,st231-rproc";
- memory-region = <&delta_reserved>;
- resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x224>;
+ compatible = "st,st231-rproc";
+ memory-region = <&delta_reserved>;
+ resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x224>;
#mbox-cells = <1>;
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
st_dwc3: dwc3@8f94000 {
- compatible = "st,stih407-dwc3";
- reg = <0x08f94000 0x1000>, <0x110 0x4>;
- reg-names = "reg-glue", "syscfg-reg";
- st,syscfg = <&syscfg_core>;
- resets = <&powerdown STIH407_USB3_POWERDOWN>,
- <&softreset STIH407_MIPHY2_SOFTRESET>;
- reset-names = "powerdown", "softreset";
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
ranges;
status = "disabled";
- dwc3: dwc3@9900000 {
- compatible = "snps,dwc3";
- reg = <0x09900000 0x100000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- phy-names = "usb2-phy", "usb3-phy";
- phys = <&usb2_picophy0>,
- <&phy_port2 PHY_TYPE_USB3>;
+ dwc3: usb@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
snps,dis_u3_susphy_quirk;
};
};
/* COMMS PWM Module */
pwm0: pwm@9810000 {
- compatible = "st,sti-pwm";
- #pwm-cells = <2>;
- reg = <0x9810000 0x68>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
- status = "disabled";
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
- compatible = "st,sti-pwm";
- #pwm-cells = <2>;
- reg = <0x9510000 0x68>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1_chan0_default
- &pinctrl_pwm1_chan1_default
- &pinctrl_pwm1_chan2_default
- &pinctrl_pwm1_chan3_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
- status = "disabled";
+ status = "disabled";
};
rng10: rng@8a89000 {
- compatible = "st,rng";
- reg = <0x08a89000 0x1000>;
- clocks = <&clk_sysin>;
- status = "okay";
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
};
rng11: rng@8a8a000 {
- compatible = "st,rng";
- reg = <0x08a8a000 0x1000>;
- clocks = <&clk_sysin>;
- status = "okay";
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
};
ethernet0: dwmac@9630000 {
};
mailbox0: mailbox@8f00000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f00000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- mbox-name = "a9";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f00000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ mbox-name = "a9";
+ status = "okay";
};
mailbox1: mailbox@8f01000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f01000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_gp_1";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f01000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_1";
+ status = "okay";
};
mailbox2: mailbox@8f02000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f02000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_gp_0";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f02000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_0";
+ status = "okay";
};
mailbox3: mailbox@8f03000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f03000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_audio_video";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f03000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_audio_video";
+ status = "okay";
};
/* fdma audio */
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
- status = "disabled";
+ status = "disabled";
};
sti_uni_player1: sti-uni-player@8d81000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0>;
- assigned-clocks = <&clk_s_d2_quadfs 0>,
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irq";
+ interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
#size-cells = <1>;
reg = <0 0>;
- assigned-clocks = <&clk_s_d2_quadfs 0>,
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irq";
+ interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
/* tsin0 is TSA on NIMA */
tsin0: port {
- tsin-num = <0>;
+ tsin-num = <0>;
serial-not-parallel;
- i2c-bus = <&ssc2>;
- reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
- dvb-card = <STV0367_TDA18212_NIMA_1>;
+ i2c-bus = <&ssc2>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+ dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
&mac {
status = "okay";
- pinctrl-0 = <ðernet_mii>;
- pinctrl-names = "default";
- phy-mode = "mii";
- phy-handle = <&phy1>;
+ pinctrl-0 = <ðernet_mii>;
+ pinctrl-names = "default";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
arm,primecell-periphid = <0x10153180>;
reg = <0x52007000 0x1000>;
interrupts = <49>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC1_CK>;
clock-names = "apb_pclk";
resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
arm,primecell-periphid = <0x10153180>;
reg = <0x48022400 0x400>;
interrupts = <124>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC2_CK>;
clock-names = "apb_pclk";
resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
&mac {
status = "disabled";
- pinctrl-0 = <ðernet_rmii>;
- pinctrl-names = "default";
- phy-mode = "rmii";
- phy-handle = <&phy0>;
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
&mac {
status = "disabled";
- pinctrl-0 = <ðernet_rmii>;
- pinctrl-names = "default";
- phy-mode = "rmii";
- phy-handle = <&phy0>;
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
&mac {
status = "disabled";
- pinctrl-0 = <ðernet_rmii>;
- pinctrl-names = "default";
- phy-mode = "rmii";
- phy-handle = <&phy0>;
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
/ {
#address-cells = <1>;
interrupt-parent = <&intc>;
};
- clocks {
- clk_axi: clk-axi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <266500000>;
+ firmware {
+ optee {
+ method = "smc";
+ compatible = "linaro,optee-tz";
};
- clk_hse: clk-hse {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- };
-
- clk_hsi: clk-hsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <64000000>;
- };
-
- clk_lsi: clk-lsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32000>;
- };
-
- clk_pclk3: clk-pclk3 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <104438965>;
- };
-
- clk_pclk4: clk-pclk4 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <133250000>;
- };
-
- clk_pll4_p: clk-pll4_p {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- };
+ scmi: scmi {
+ compatible = "linaro,scmi-optee";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linaro,optee-channel-id = <0>;
+ shmem = <&scmi_shm>;
- clk_pll4_r: clk-pll4_r {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <99000000>;
- };
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
- clk_rtc_k: clk-rtc-k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
};
};
interrupt-parent = <&intc>;
ranges;
+ scmi_sram: sram@2ffff000 {
+ compatible = "mmio-sram";
+ reg = <0x2ffff000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2ffff000 0x1000>;
+
+ scmi_shm: scmi-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0 0x80>;
+ };
+ };
+
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_hsi>;
+ clocks = <&rcc UART4_K>;
+ resets = <&rcc UART4_R>;
status = "disabled";
};
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc DMA1>;
+ resets = <&rcc DMA1_R>;
#dma-cells = <4>;
st,mem2mem;
dma-requests = <8>;
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc DMA2>;
+ resets = <&rcc DMA2_R>;
#dma-cells = <4>;
st,mem2mem;
dma-requests = <8>;
dmamux1: dma-router@48002000 {
compatible = "st,stm32h7-dmamux";
reg = <0x48002000 0x40>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc DMAMUX1>;
+ resets = <&rcc DMAMUX1_R>;
#dma-cells = <3>;
dma-masters = <&dma1 &dma2>;
dma-requests = <128>;
dma-channels = <16>;
};
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp13-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+ };
+
exti: interrupt-controller@5000d000 {
compatible = "st,stm32mp13-exti", "syscon";
interrupt-controller;
syscfg: syscon@50020000 {
compatible = "st,stm32mp157-syscfg", "syscon";
reg = <0x50020000 0x400>;
- clocks = <&clk_pclk3>;
+ clocks = <&rcc SYSCFG>;
};
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc MDMA>;
#dma-cells = <5>;
dma-channels = <32>;
dma-requests = <48>;
reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&clk_pll4_p>;
+ clocks = <&rcc SDMMC1_K>;
clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <130000000>;
reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&clk_pll4_p>;
+ clocks = <&rcc SDMMC2_K>;
clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <130000000>;
iwdg2: watchdog@5a002000 {
compatible = "st,stm32mp1-iwdg";
reg = <0x5a002000 0x400>;
- clocks = <&clk_pclk4>, <&clk_lsi>;
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
clock-names = "pclk", "lsi";
status = "disabled";
};
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_pclk4>, <&clk_rtc_k>;
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+ <&scmi_clk CK_SCMI_RTC>;
clock-names = "pclk", "rtc_ck";
status = "disabled";
};
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
ngpios = <15>;
gpio-ranges = <&pinctrl 0 112 15>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x400>;
- clocks = <&clk_pclk4>;
+ clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 128 8>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
- clocks = <&clk_hse>, <&clk_pll4_r>;
+ clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
status = "disabled";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
- clocks = <&clk_hse>, <&clk_pll4_r>;
+ clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
reg = <0xc0000000 0x20000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ optee@dd000000 {
+ reg = <0xdd000000 0x3000000>;
+ no-map;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
compatible = "st,stm32mp1-cryp";
reg = <0x54002000 0x400>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_axi>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
status = "disabled";
};
};
compatible = "st,stm32mp1-cryp";
reg = <0x54002000 0x400>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_axi>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
status = "disabled";
};
};
};
};
+ dcmi_pins_c: dcmi-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('I', 6, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>;/* DCMI_D9 */
+ bias-pull-up;
+ };
+ };
+
+ dcmi_sleep_pins_c: dcmi-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('I', 6, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>;/* DCMI_D9 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
};
};
+ mco1_pins_a: mco1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ mco1_sleep_pins_a: mco1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+ };
+ };
+
mco2_pins_a: mco2-0 {
pins {
pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
};
};
+ m_can1_pins_c: m-can1-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+ bias-disable;
+ };
+ };
+
+ m_can1_sleep_pins_c: m_can1-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
m_can2_pins_a: m-can2-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
spi2_pins_a: spi2-0 {
pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+ pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+ bias-disable;
+ };
+ };
+
+ spi2_pins_b: spi2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
- pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
bias-disable;
};
};
};
};
+ uart4_pins_d: uart4-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_idle_pins_d: uart4-idle-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_sleep_pins_d: uart4-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+ };
+
+ uart5_pins_a: uart5-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
+ bias-disable;
+ };
+ };
+
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
};
};
+ usart3_pins_e: usart3-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-pull-up;
+ };
+ };
+
+ usart3_idle_pins_e: usart3-idle-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+ bias-pull-up;
+ };
+ };
+
+ usart3_sleep_pins_e: usart3-sleep-4 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+ <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
reg = <0x4c001000 0x400>;
st,proc-id = <0>;
interrupts-extended =
- <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 61 1>;
- interrupt-names = "rx", "tx", "wakeup";
+ <&exti 61 1>,
+ <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
clocks = <&rcc IPCC>;
wakeup-source;
status = "disabled";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * DRC Compact PCB number: 627-100 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-drc-compact.dtsi"
+
+/ {
+ model = "DH electronics STM32MP153C DHCOR DRC Compact";
+ compatible = "dh,stm32mp153c-dhcor-drc-compact",
+ "dh,stm32mp153c-dhcor-som",
+ "st,stm32mp153";
+};
+
+&m_can1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&m_can1_pins_c>;
+ pinctrl-1 = <&m_can1_sleep_pins_c>;
+ status = "okay";
+};
};
};
+&dcmi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcmi_pins_c>;
+ pinctrl-1 = <&dcmi_sleep_pins_c>;
+ status = "disabled";
+
+ port {
+ dcmi_0: endpoint {
+ remote-endpoint = <&stmipi_2>;
+ bus-type = <5>;
+ bus-width = <8>;
+ pclk-sample = <0>;
+ };
+ };
+};
+
ðernet0 {
status = "okay";
pinctrl-0 = <ðernet0_rgmii_pins_c>;
};
&i2c4 {
+ stmipi: stmipi@14 {
+ compatible = "st,st-mipid02";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mco1_pins_a>;
+ pinctrl-1 = <&mco1_sleep_pins_a>;
+ reg = <0x14>;
+ clocks = <&rcc CK_MCO1>;
+ clock-names = "xclk";
+ assigned-clocks = <&rcc CK_MCO1>;
+ assigned-clock-parents = <&rcc CK_HSE>;
+ assigned-clock-rates = <24000000>;
+ VDDE-supply = <&v1v8>;
+ VDDIN-supply = <&v1v8>;
+ reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stmipi_0: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ stmipi_2: endpoint {
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <0>;
+ remote-endpoint = <&dcmi_0>;
+ };
+ };
+ };
+ };
+
hdmi-transmitter@3d {
compatible = "adi,adv7513";
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+ aliases {
+ ethernet0 = ðernet0;
+ ethernet1 = &ksz8851;
+ mmc0 = &sdmmc1;
+ rtc0 = &hwrtc;
+ rtc1 = &rtc;
+ serial0 = &uart4;
+ serial1 = &uart8;
+ serial2 = &usart3;
+ serial3 = &uart5;
+ spi0 = &qspi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ led {
+ compatible = "gpio-leds";
+ led1 {
+ label = "yellow:user0";
+ gpios = <&gpioz 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "red:user1";
+ gpios = <&gpioz 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ ethernet_vio: vioregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpioh 2 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd>;
+ };
+};
+
+&adc { /* X11 ADC inputs */
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc12_ain_pins_b>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vdda>;
+ status = "okay";
+
+ adc1: adc@0 {
+ st,adc-channels = <0 1 6>;
+ st,min-sample-time-nsecs = <5000>;
+ status = "okay";
+ };
+
+ adc2: adc@100 {
+ st,adc-channels = <0 1 2>;
+ st,min-sample-time-nsecs = <5000>;
+ status = "okay";
+ };
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_c>;
+ pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1000>;
+ reset-post-delay-us = <1000>;
+
+ phy0: ethernet-phy@7 {
+ reg = <7>;
+
+ rxc-skew-ps = <1500>;
+ rxdv-skew-ps = <540>;
+ rxd0-skew-ps = <420>;
+ rxd1-skew-ps = <420>;
+ rxd2-skew-ps = <420>;
+ rxd3-skew-ps = <420>;
+
+ txc-skew-ps = <1440>;
+ txen-skew-ps = <540>;
+ txd0-skew-ps = <420>;
+ txd1-skew-ps = <420>;
+ txd2-skew-ps = <420>;
+ txd3-skew-ps = <420>;
+ };
+ };
+};
+
+&fmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&fmc_pins_b>;
+ pinctrl-1 = <&fmc_sleep_pins_b>;
+ status = "okay";
+
+ ksz8851: ethernet@1,0 {
+ compatible = "micrel,ks8851-mll";
+ reg = <1 0x0 0x2>, <1 0x2 0x20000>;
+ interrupt-parent = <&gpioc>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ bank-width = <2>;
+
+ /* Timing values are in nS */
+ st,fmc2-ebi-cs-mux-enable;
+ st,fmc2-ebi-cs-transaction-type = <4>;
+ st,fmc2-ebi-cs-buswidth = <16>;
+ st,fmc2-ebi-cs-address-setup-ns = <5>;
+ st,fmc2-ebi-cs-address-hold-ns = <5>;
+ st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+ st,fmc2-ebi-cs-data-setup-ns = <45>;
+ st,fmc2-ebi-cs-data-hold-ns = <1>;
+ st,fmc2-ebi-cs-write-address-setup-ns = <5>;
+ st,fmc2-ebi-cs-write-address-hold-ns = <5>;
+ st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>;
+ st,fmc2-ebi-cs-write-data-setup-ns = <45>;
+ st,fmc2-ebi-cs-write-data-hold-ns = <1>;
+ };
+};
+
+&gpioa {
+ gpio-line-names = "", "", "", "",
+ "DRCC-VAR2", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpioe {
+ gpio-line-names = "", "", "", "",
+ "", "DRCC-GPIO0", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpiog {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "DRCC-GPIO5", "", "", "";
+};
+
+&gpioh {
+ gpio-line-names = "", "", "", "DRCC-HW2",
+ "DRCC-GPIO4", "", "", "",
+ "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1",
+ "DRCC-VAR0", "", "", "DRCC-GPIO6";
+};
+
+&gpioi {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "DRCC-GPIO2",
+ "", "DRCC-GPIO1", "", "",
+ "", "", "", "";
+};
+
+&i2c1 { /* X11 I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ hwrtc: rtc@32 {
+ compatible = "microcrystal,rv8803";
+ reg = <0x32>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&sdmmc1 { /* MicroSD */
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&vdd>;
+ vqmmc-supply = <&vdd>;
+ status = "okay";
+};
+
+&sdmmc2 { /* eMMC */
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
+ status = "okay";
+};
+
+&sdmmc3 { /* SDIO Wi-Fi */
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_a>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+ broken-cd;
+ bus-width = <4>;
+ mmc-ddr-3_3v;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&spi2 { /* X11 SPI */
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_b>;
+ cs-gpios = <&gpioi 0 0>;
+ status = "disabled";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&uart4 {
+ label = "UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_d>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart5 { /* X11 UART */
+ label = "X11-UART5";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart8 {
+ label = "RS485-1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+ uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usart3 { /* RS485 or RS232 */
+ label = "RS485-2";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usart3_pins_e>;
+ pinctrl-1 = <&usart3_sleep_pins_e>;
+ uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ status = "okay";
+};
+
+&usbh_ohci {
+ phys = <&usbphyc_port0>;
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "otg";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ vbus-supply = <&vbus_otg>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ connector {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vbus_sw>;
+ };
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
};
};
+&vdd {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+};
+
&pwr_regulators {
vdd-supply = <&vdd_io>;
};
vdd: buck3 {
regulator-name = "vdd";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
no-map;
};
};
-
- reg_sip_eeprom: regulator_eeprom {
- compatible = "regulator-fixed";
- regulator-name = "sip_eeprom";
- regulator-always-on;
- };
};
&i2c4 {
compatible = "st,stpmic1-regulators";
ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
ldo6-supply = <&v3v3>;
pwr_sw1-supply = <&bst_out>;
sip_eeprom: eeprom@50 {
compatible = "atmel,24c32";
- vcc-supply = <®_sip_eeprom>;
+ vcc-supply = <&vdd>;
reg = <0x50>;
};
};
compatible = "gpio-keys-polled";
poll-interval = <20>;
- left-joystick-left {
+ event-left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
};
- left-joystick-right {
+ event-left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
};
- left-joystick-up {
+ event-left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
};
- left-joystick-down {
+ event-left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
};
- right-joystick-left {
+ event-right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
};
- right-joystick-right {
+ event-right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
};
- right-joystick-up {
+ event-right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
};
- right-joystick-down {
+ event-right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
};
- dpad-left {
+ event-dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
};
- dpad-right {
+ event-dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
};
- dpad-up {
+ event-dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
};
- dpad-down {
+ event-dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
};
- x {
+ event-x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
};
- y {
+ event-y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
};
- a {
+ event-a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
};
- b {
+ event-b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
};
- select {
+ event-select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
};
- start {
+ event-start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
};
- top-left {
+ event-top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
};
- top-right {
+ event-top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- home {
+ key-home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- menu {
+ key-menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
compatible = "gpio-leds";
led-0 {
- label ="licheepi:red:usr";
+ label = "licheepi:red:usr";
gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
};
led-1 {
- label ="licheepi:green:usr";
+ label = "licheepi:green:usr";
gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-2 {
- label ="licheepi:blue:usr";
+ label = "licheepi:blue:usr";
gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
/ {
ccu: clock@1c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&rtc 0>, <&osc24M>,
+ clocks = <&rtc CLK_OSC32K>, <&osc24M>,
<&ccu CLK_PLL_PERIPH>,
<&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
ir_clk: ir_clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
- clocks = <&rtc 0>, <&osc24M>;
+ clocks = <&rtc CLK_OSC32K>, <&osc24M>;
clock-output-names = "ir";
};
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- home {
+ key-home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- menu {
+ key-menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
ccu: clock@1c20000 {
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x01c20800 0x400>;
interrupt-parent = <&r_intc>;
/* interrupts get set in SoC specific dtsi file */
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
reg = <0x01f02c00 0x400>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
};
- user {
+ key-user {
label = "user";
linux,code = <BTN_0>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- k1 {
+ key-0 {
label = "k1";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- k1 {
+ key-0 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw2 {
+ switch-2 {
label = "sw2";
linux,code = <BTN_1>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo1>;
vddio-supply = <®_aldo3>;
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
--- /dev/null
+/{
+ cpu0_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1000000 1000000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1100000 1100000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1160000 1160000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1240000 1240000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1300000 1300000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
&i2c0 {
status = "okay";
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
};
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_hot_trip: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot_trip: cpu-very-hot {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu_hot_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
gpu_thermal: gpu-thermal {
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
reg-io-width = <1>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include "sunplus-sp7021.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "sunplus,sp7021-achip", "sunplus,sp7021";
+ model = "Sunplus SP7021 (CA7)";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <931000000>;
+ };
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clock-frequency = <931000000>;
+ };
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ clock-frequency = <931000000>;
+ };
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ clock-frequency = <931000000>;
+ };
+ };
+
+ gic: interrupt-controller@9f101000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x9f101000 0x1000>,
+ <0x9f102000 0x2000>,
+ <0x9f104000 0x2000>,
+ <0x9f106000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <XTAL>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ soc@9c000000 {
+ intc: interrupt-controller@780 {
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
+ *
+ * Copyright (C) Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+ compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021";
+ model = "Sunplus SP7021/CA7/Demo_V3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sunplus,sp7021-reset.h>
+#include <dt-bindings/pinctrl/sppctl-sp7021.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define XTAL 27000000
+
+/ {
+ compatible = "sunplus,sp7021";
+ model = "Sunplus SP7021";
+
+ clocks {
+ extclk: osc0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <XTAL>;
+ clock-output-names = "extclk";
+ };
+ };
+
+ soc@9c000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x9c000000 0x400000>;
+ interrupt-parent = <&intc>;
+
+ clkc: clock-controller@4 {
+ compatible = "sunplus,sp7021-clkc";
+ reg = <0x4 0x28>,
+ <0x200 0x44>,
+ <0x268 0x04>;
+ clocks = <&extclk>;
+ #clock-cells = <1>;
+ };
+
+ intc: interrupt-controller@780 {
+ compatible = "sunplus,sp7021-intc";
+ reg = <0x780 0x80>, <0xa80 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ otp: otp@af00 {
+ compatible = "sunplus,sp7021-ocotp";
+ reg = <0xaf00 0x34>, <0xaf80 0x58>;
+ reg-names = "hb_gpio", "otprx";
+ clocks = <&clkc CLK_OTPRX>;
+ resets = <&rstc RST_OTPRX>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ therm_calib: thermal-calibration@14 {
+ reg = <0x14 0x3>;
+ };
+ disc_vol: disconnect-voltage@18 {
+ reg = <0x18 0x2>;
+ };
+ mac_addr0: mac-address0@34 {
+ reg = <0x34 0x6>;
+ };
+ mac_addr1: mac-address1@3a {
+ reg = <0x3a 0x6>;
+ };
+ };
+
+ pctl: pinctrl@100 {
+ compatible = "sunplus,sp7021-pctl";
+ reg = <0x100 0x100>,
+ <0x300 0x100>,
+ <0x32e4 0x1C>,
+ <0x80 0x20>;
+ reg-names = "moon2", "gpioxt", "first", "moon1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clkc CLK_GPIO>;
+ resets = <&rstc RST_GPIO>;
+
+ emac_pins: pinmux-emac-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+ SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+ SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+ SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+ SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
+ SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
+ SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
+ >;
+ sunplus,zerofunc = <
+ MUXF_L2SW_LED_FLASH0
+ MUXF_L2SW_LED_FLASH1
+ MUXF_L2SW_LED_ON0
+ MUXF_L2SW_LED_ON1
+ MUXF_DAISY_MODE
+ >;
+ };
+
+ emmc_pins: pinmux-emmc-pins {
+ function = "CARD0_EMMC";
+ groups = "CARD0_EMMC";
+ };
+
+ leds_pins: pinmux-leds-pins {
+ sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
+ };
+
+ sdcard_pins: pinmux-sdcard-pins {
+ function = "SD_CARD";
+ groups = "SD_CARD";
+ sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+ };
+
+ spi0_pins: pinmux-spi0-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
+ SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
+ SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
+ SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
+ SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
+ >;
+ };
+
+ uart0_pins: pinmux-uart0-pins {
+ function = "UA0";
+ groups = "UA0";
+ };
+
+ uart1_pins: pinmux-uart1-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+ SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+ >;
+ };
+
+ uart2_pins: pinmux-uart2-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
+ SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
+ SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
+ SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
+ >;
+ };
+
+ uart4_pins: pinmux-uart4-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+ SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+ SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
+ SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
+ >;
+ };
+ };
+
+ rstc: reset@54 {
+ compatible = "sunplus,sp7021-reset";
+ reg = <0x54 0x28>;
+ #reset-cells = <1>;
+ };
+
+ rtc: rtc@3a00 {
+ compatible = "sunplus,sp7021-rtc";
+ reg = <0x3a00 0x80>;
+ reg-names = "rtc";
+ clocks = <&clkc CLK_RTC>;
+ resets = <&rstc RST_RTC>;
+ interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ spi_controller0: spi@2d80 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0x2d80 0x80>, <0x2e00 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+ <146 IRQ_TYPE_LEVEL_HIGH>,
+ <145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_0>;
+ resets = <&rstc RST_SPI_COMBO_0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
+ <&pctl 28 GPIO_ACTIVE_LOW>;
+ };
+
+ spi_controller1: spi@f480 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf480 0x80>, <0xf500 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_1>;
+ resets = <&rstc RST_SPI_COMBO_1>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ spi_controller2: spi@f600 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf600 0x80>, <0xf680 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_2>;
+ resets = <&rstc RST_SPI_COMBO_2>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ spi_controller3: spi@f780 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf780 0x80>, <0xf800 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
+ <75 IRQ_TYPE_LEVEL_HIGH>,
+ <74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_3>;
+ resets = <&rstc RST_SPI_COMBO_3>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ uart0: serial@900 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x900 0x80>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA0>;
+ resets = <&rstc RST_UA0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ };
+
+ uart1: serial@980 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x980 0x80>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA1>;
+ resets = <&rstc RST_UA1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+ };
+
+ uart2: serial@800 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x800 0x80>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA2>;
+ resets = <&rstc RST_UA2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+ };
+
+ uart3: serial@880 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x880 0x80>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA3>;
+ resets = <&rstc RST_UA3>;
+ status = "disabled";
+ };
+
+ uart4: serial@8780 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x8780 0x80>;
+ interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA4>;
+ resets = <&rstc RST_UA4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+ system-led {
+ label = "system-led";
+ gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-h3-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
reg = <0x01f02c00 0x400>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- power {
+ button-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <10>;
};
- volume-down {
+ button-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_hall_sensor_default>;
- hall-sensor {
+ switch-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
gpio-keys {
compatible = "gpio-keys";
- home {
+ key-home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <5>;
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
vddio-supply = <&vdd_1v8_sys>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- rotation-lock {
+ key-rotation-lock {
label = "Rotate-lock";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
linux,code = <SW_ROTATE_LOCK>;
debounce-interval = <10>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
vddio-supply = <&vdd_1v8_sys>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
- dock-hall-sensor {
+ switch-dock-hall-sensor {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio@6000d000 {
init-mode-hog {
gpio-hog;
- gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+ gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
output-low;
vddio-supply = <&vdd_1v8>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
};
};
status = "okay";
touchscreen@10 {
- compatible ="elan,ektf3624";
+ compatible = "elan,ektf3624";
reg = <0x10>;
interrupt-parent = <&gpio>;
gpio-keys {
compatible = "gpio-keys";
- hall-sensor {
+ switch-hall-sensor {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
gpio@6000d000 {
init-mode-3g-hog {
gpio-hog;
- gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+ gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- dock-hall-sensor {
+ switch-dock-hall-sensor {
label = "Lid sensor";
gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- lineout-detect {
+ switch-lineout-detect {
label = "Audio dock line-out detect";
gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
interrupt-parent = <&pmic>;
interrupts = <2 0>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <10>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
spdif-in-pk6 {
- nvidia,pins = "spdif_in_pk6";
+ nvidia,pins = "spdif_in_pk6";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Multiplexed and therefore disabled */
cam-mclk-pcc0 {
- nvidia,pins = "cam_mclk_pcc0";
+ nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
/* Colibri USBC_DET */
spdif-out-pk5 {
- nvidia,pins = "spdif_out_pk5";
+ nvidia,pins = "spdif_out_pk5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
linux,code = <KEY_POWER>;
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- dock-insert {
+ switch-dock-insert {
label = "Chagall Dock";
gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- lineout-detect {
+ switch-lineout-detect {
label = "Audio dock line-out detect";
gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw14 {
+ switch-14 {
label = "sw14";
gpios = <&gpio0 12 0>;
linux,code = <108>; /* down */
wakeup-source;
autorepeat;
};
- sw13 {
+ switch-13 {
label = "sw13";
gpios = <&gpio0 14 0>;
linux,code = <103>; /* up */
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- K1 {
+ key {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
CONFIG_LOCALVERSION="gum"
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PREEMPT=y
CONFIG_EXPERT=y
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_GUMSTIX=y
-CONFIG_PCCARD=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_BT_BNEP=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
+CONFIG_PCCARD=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_PXA2XX=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=m
CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=m
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_RUBIN=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_USER=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_ARC4=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_USER=y
CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_KEXEC=y
-CONFIG_FIRMWARE_MEMMAP=y
CONFIG_JUMP_LABEL=y
CONFIG_STRICT_KERNEL_RWX=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONED_MASTER=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
CONFIG_I2C_ASPEED=y
CONFIG_I2C_FSI=y
CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ASPEED=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_GDB_SCRIPTS=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G5=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
-CONFIG_FIRMWARE_MEMMAP=y
CONFIG_JUMP_LABEL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONED_MASTER=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
CONFIG_I2C_FSI=y
CONFIG_I2C_SLAVE=y
CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_FSI=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_GDB_SCRIPTS=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_ASSABET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_FB_SA1100=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_DEBUG_USER=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_KEXEC=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_EEPROM_AT24=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_EXT4_FS=y
-CONFIG_AUTOFS_FS=m
CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AXXIA=y
-CONFIG_GPIO_PCA953X=y
CONFIG_ARM_LPAE=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
CONFIG_PCIE_AXXIA=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_HIGHMEM=y
-CONFIG_KSM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_VFP=y
CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_BRIDGE=y
# CONFIG_WIRELESS is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PL061=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AXXIA=y
+CONFIG_POWER_SUPPLY=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM75=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_XCBC=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_BADGE4=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-CONFIG_SA1100_FIR=y
CONFIG_BT=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
CONFIG_CC_STACKPROTECTOR_REGULAR=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
-CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_KSM=y
-CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_CPUFREQ_DT=y
CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_PM=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_DRM=y
+CONFIG_DRM_V3D=y
CONFIG_DRM_VC4=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_PWM=y
CONFIG_PWM_BCM2835=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
CONFIG_PRINTK_TIME=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SCHED_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_FUNCTION_PROFILER=y
-CONFIG_TEST_KSTRTOX=y
CONFIG_DEBUG_FS=y
CONFIG_KGDB=y
CONFIG_KGDB_KDB=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_STACK_TRACER=y
+CONFIG_SCHED_TRACER=y
CONFIG_STRICT_DEVMEM=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_TEST_KSTRTOX=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_CERF=y
CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_FPE_FASTFPE=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_SA1100=m
CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_WATCHDOG=y
CONFIG_SA1100_WATCHDOG=m
# CONFIG_VGA_CONSOLE is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_MSDOS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_LZMA=y
CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
CONFIG_JUMP_LABEL=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_CLPS711X=y
CONFIG_ARCH_EDB7211=y
CONFIG_ARCH_P720T=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_COREDUMP is not set
+CONFIG_SLOB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRTTY_SIR=y
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_LOCALVERSION="-cm-x300"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
-CONFIG_GPIO_PCA953X=y
CONFIG_MACH_CM_X300=y
-CONFIG_NO_HZ=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_FPE_NWFPE=y
CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_DM9000=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCA953X=y
# CONFIG_HWMON is not set
CONFIG_PMIC_DA903X=y
CONFIG_REGULATOR=y
CONFIG_BACKLIGHT_DA903X=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_PERF_EVENTS is not set
-CONFIG_SLAB=y
CONFIG_PROFILING=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_MACH_CNS3420VB=y
+CONFIG_UNUSED_BOARD_FILES=y
+CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_IOSCHED_BFQ=m
-CONFIG_ARCH_MULTI_V6=y
#CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
CONFIG_DEBUG_CNS3XXX=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=20000
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
# CONFIG_ATA_SFF is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FSCACHE=y
CONFIG_TMPFS=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
# CONFIG_ARM_UNWIND is not set
CONFIG_CRC_CCITT=y
+CONFIG_DEBUG_FS=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_COLIBRI=y
+CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PXA2XX=y
CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_ONENAND=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_DM9000=y
+CONFIG_PHYLIB=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_KEYS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_COLIBRI300=y
CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttyS0,115200 rw"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_AX88796=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_BASE_FULL is not set
# CONFIG_EPOLL is not set
-CONFIG_SLOB=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_COLLIE=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_DEBUG=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HWMON is not set
CONFIG_MCP_SA11X0=y
CONFIG_MCP_UCB1200=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LOCOMO=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRC_CCITT=y
CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_PXA=y
CONFIG_SPI=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_SOUND=y
CONFIG_SOUND_PRIME=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
CONFIG_USB=m
CONFIG_USB_MON=m
CONFIG_USB_SL811_HCD=m
CONFIG_NFS_V4=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V7=n
CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_CMA=y
CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPUFREQ_DT=m
CONFIG_CPU_IDLE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER=m
-CONFIG_DMA_CMA=y
CONFIG_DA8XX_MSTPRI=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_TUN=m
CONFIG_DM9000=y
CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_LSI_ET1011C_PHY=y
CONFIG_LXT_PHY=y
+CONFIG_LSI_ET1011C_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_PPP=m
CONFIG_PPP_DEFLATE=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_DM355EVM=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_VT_CONSOLE is not set
CONFIG_SERIAL_8250=y
CONFIG_BATTERY_LEGO_EV3=m
CONFIG_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
-CONFIG_MFD_DM355EVM_MSP=y
CONFIG_TPS6507X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_DMA_CMA=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_DOVE=y
CONFIG_MACH_DOVE_DB=y
CONFIG_MACH_CM_A510=y
CONFIG_MACH_DOVE_DT=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_BLK_DEV_RAM_COUNT=1
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_SATA_MV=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_USER=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V4T=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_EP93XX=y
-CONFIG_MACH_ADSSPHERE=y
CONFIG_MACH_EDB9301=y
CONFIG_MACH_EDB9302=y
CONFIG_MACH_EDB9302A=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=y
-CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
-CONFIG_MACH_MICRO9L=y
-CONFIG_MACH_MICRO9S=y
-CONFIG_MACH_SIM_ONE=y
-CONFIG_MACH_SNAPPER_CL15=y
CONFIG_MACH_TS72XX=y
CONFIG_MACH_VISION_EP9307=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_IPV6_SIT is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
CONFIG_EP93XX_ETH=y
CONFIG_USB_RTL8150=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_LIBCRC32C=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_KALLSYMS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_PXA_ESERIES=y
-# CONFIG_ARM_THUMB is not set
CONFIG_IWMMXT=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_PXA_FICP=y
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_PXA2XX=m
# CONFIG_STANDALONE is not set
CONFIG_MTD=m
CONFIG_MTD_RAW_NAND=m
CONFIG_BLK_DEV_LOOP=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_SATA_PMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_PXA=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_MFD_T7L66XB=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_MIXER_OSS=m
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
CONFIG_NR_CPUS=8
CONFIG_HIGHMEM=y
CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_ENERGY_MODEL=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_ENERGY_MODEL=y
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_CROS_EC_DEV=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
-CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5C73M3=m
+CONFIG_VIDEO_S5K6A3=m
CONFIG_DRM=y
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
-CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MAX8997=y
+CONFIG_LEDS_AAT1290=y
+CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_SPI=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
-CONFIG_EXYNOS5422_DMC=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_EXTCON=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
+CONFIG_EXYNOS5422_DMC=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_STMPE_ADC=y
CONFIG_FONT_7x14=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PROVE_LOCKING=y
CONFIG_LOCALVERSION="-ezx200910312315"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_PXA_EZX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_NAT=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_WLAN is not set
CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCAP=y
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=8
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_RADIO_TEA5764=y
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_PXA27x=y
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_TEA5764=y
CONFIG_FB=y
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
CONFIG_HID_APPLE=m
+# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_CATS=y
CONFIG_ARCH_EBSA285_HOST=y
CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_ATM=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_WINBOND_FIR=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_NET_PCI=y
CONFIG_NE2K_PCI=y
CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_21285=y
CONFIG_SERIAL_21285_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
CONFIG_PRINTER=m
CONFIG_DS1620=y
CONFIG_NWBUTTON=y
CONFIG_USB=m
CONFIG_USB_MON=m
CONFIG_USB_PRINTER=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_EXT2_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_H3600=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
# CONFIG_WIRELESS is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_H5000=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="keepinitrd"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_HACKKIT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
# CONFIG_VGA_CONSOLE is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_LZMA=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_ARCH_HIX5HD2=y
CONFIG_ARCH_HIP01=y
CONFIG_ARCH_HIP04=y
+CONFIG_ARCH_HIX5HD2=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_PM=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_PINCTRL_SINGLE=y
-CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_DWAPB=y
CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_DRM=y
CONFIG_FB_SIMPLE=y
CONFIG_USB_STORAGE=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
-CONFIG_DW_DMAC=y
CONFIG_PL330_DMA=y
+CONFIG_DW_DMAC=y
CONFIG_PWM=y
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_EXT4_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
-CONFIG_VFP=y
CONFIG_VFPv3=y
+CONFIG_DEBUG_FS=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_PM_DEBUG=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX31=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BINFMT_MISC=m
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MUX=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
CONFIG_VIDEO_CODA=m
CONFIG_VIDEO_IMX_PXP=y
-CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
+CONFIG_VIDEO_ADV7180=m
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MSM=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_FTRACE is not set
CONFIG_NFSD=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_IOP32X=y
CONFIG_MACH_GLANTANK=y
CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
CONFIG_MACH_N2100=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_SATA_SIL=y
CONFIG_SATA_VITESSE=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
CONFIG_KEYS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_LIBCRC32C=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
CONFIG_EXPERT=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_AEABI=y
CONFIG_CMDLINE="console=ttyS0,115200"
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_JORNADA720=y
CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_PM=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IP_MULTICAST=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_HP7XX=y
+CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_S1D13XXX=y
-# CONFIG_SWAP is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
+CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM_LPAE=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
CONFIG_PCI_KEYSTONE=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARM_PSCI=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_CMA=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_SUSPEND is not set
CONFIG_PM=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
+CONFIG_TI_SCI_PROTOCOL=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
+CONFIG_TI_CPTS=y
CONFIG_TI_KEYSTONE_NETCP=y
CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_TI_CPTS=y
CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_GPIO_DECODER=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_SYSCON=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=m
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
-CONFIG_NOP_USB_XCEIV=y
CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_KEYSTONE_IRQ=y
CONFIG_RESET_TI_SCI=m
CONFIG_RESET_TI_SYSCON=m
-CONFIG_TI_SCI_PROTOCOL=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_FANOTIFY=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_SPI_CADENCE_QUADSPI=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_GPIO_DECODER=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_LEDS_TRIGGER_ACTIVITY=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_MICREL_PHY=y
-CONFIG_DP83867_PHY=y
+CONFIG_DMA_CMA=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_USER=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_LART=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_PM=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_SA1100_FIR=m
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=1
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=m
CONFIG_REISERFS_FS=m
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
# CONFIG_MMU is not set
CONFIG_ARCH_LPC18XX=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_SIZE=0x02000000
CONFIG_FLASH_MEM_BASE=0x1b000000
CONFIG_FLASH_SIZE=0x00080000
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_LPC2K=y
CONFIG_SPI=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_LPC32XX=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PNX=y
-CONFIG_GPIO_LPC32XX=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
CONFIG_SENSORS_DS620=y
CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_GDB_SCRIPTS=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=5
# CONFIG_SCHED_DEBUG is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_LUBBOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_PCNET=y
+CONFIG_SMC91X=y
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_SA1111=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB_GADGET=y
CONFIG_USB_G_SERIAL=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_H4700=y
CONFIG_MACH_MAGICIAN=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="keepinitrd"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NETDEVICES=y
CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_MPPE=m
# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_PPP_ASYNC=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_PXA=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PXA=y
CONFIG_W1_MASTER_DS1WM=y
+CONFIG_HTC_EGPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_HWMON is not set
CONFIG_MFD_ASIC3=y
-CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_MIXER_OSS=m
CONFIG_USB=y
CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_PXA27X=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
CONFIG_MMC=y
CONFIG_SDIO_UART=m
CONFIG_MMC_PXA=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_EFI_VARS=m
-CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_CMA=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_OF_OVERLAY=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC_ITU_T=m
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_POSIX_MQUEUE=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MULTI_V4T=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_S3C24XX=y
CONFIG_CPU_S3C2440=y
CONFIG_MACH_MINI2440=y
CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_KEXEC=y
CONFIG_CPU_IDLE=y
CONFIG_APM_EMULATION=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_BINFMT_MISC=m
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_MINI_4x6=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_USER=y
CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MMP=y
-CONFIG_MACH_BROWNSTONE=y
-CONFIG_MACH_FLINT=y
-CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_MACH_MMP2_DT=y
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_PXA=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX8925=y
-CONFIG_MMC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_RESET_CONTROLLER is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_MMP_UART3=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
+CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_ELF_CORE is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MOXART=y
CONFIG_MACH_UC7112LX=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
+CONFIG_KEYS=y
+CONFIG_CRC32_BIT=y
+CONFIG_DMA_API_DEBUG=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_KGDB=y
CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_SLUB_DEBUG is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_PROVE_LOCKING=y
-CONFIG_DMA_API_DEBUG=y
-CONFIG_KGDB=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0x98200000
CONFIG_DEBUG_UART_VIRT=0xf9820000
CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
-CONFIG_CRC32_BIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EXPERT=y
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLOCK is not set
# CONFIG_MMU is not set
CONFIG_ARCH_MPS2=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x21000000
CONFIG_DRAM_SIZE=0x1000000
-CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_SUSPEND is not set
+# CONFIG_BLOCK is not set
CONFIG_BINFMT_FLAT=y
# CONFIG_COREDUMP is not set
-# CONFIG_SUSPEND is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
+CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_ROOT_NFS=y
CONFIG_NLS=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MEMTEST=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
CONFIG_ARCH_MULTI_V4T=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_CLPS711X=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX1=y
+CONFIG_ARCH_NSPIRE=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_INTEGRATOR_IMPD1=y
CONFIG_INTEGRATOR_CM720T=y
CONFIG_INTEGRATOR_CM920T=y
CONFIG_INTEGRATOR_CM922T_XA10=y
-CONFIG_ARCH_NSPIRE=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CLPS711X_CPUIDLE=y
CONFIG_JUMP_LABEL=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_COREDUMP is not set
+CONFIG_SLOB=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91SAM9=y
CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_ARCH_NPCM=y
CONFIG_ARCH_WPCM450=y
CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
CONFIG_MACH_RD88F5182_DT=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
CONFIG_MACH_D2NET_DT=y
CONFIG_MACH_NET2BIG=y
CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_PCI_MVEBU=y
-CONFIG_ARCH_VERSATILE=y
CONFIG_PCI_VERSATILE=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
CONFIG_ATMEL_SSC=m
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_BLK=y
CONFIG_CHR_DEV_SG=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_I2C_IMX=y
CONFIG_I2C_MV64XXX=y
CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_IMX=y
CONFIG_SPI_ORION=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_MV_XOR=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
CONFIG_STAGING=y
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_VIRT=y
+CONFIG_ARCH_AIROHA=y
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_ARTPEC=y
CONFIG_ARCH_BCM_23550=y
CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_53573=y
-CONFIG_ARCH_BCM_63XX=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_BCMBCA=y
+CONFIG_ARCH_BCMBCA_CORTEXA7=y
+CONFIG_ARCH_BCMBCA_CORTEXA9=y
+CONFIG_ARCH_BCMBCA_BRAHMAB15=y
CONFIG_ARCH_BERLIN=y
CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
-CONFIG_ARCH_AIROHA=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SUNPLUS=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARM_TEGRA_CPUIDLE=y
CONFIG_ARM_QCOM_SPM_CPUIDLE=y
CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_OMAP_OCP2SCP=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_TRUSTED_FOUNDATIONS=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND_STM32_FMC2=y
CONFIG_MTD_NAND_PL35X=y
CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=m
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_NET_VENDOR_ASIX=y
-CONFIG_SPI_AX88796C=m
CONFIG_VIRTIO_NET=y
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_SUN4I_EMAC=y
+CONFIG_SPI_AX88796C=m
CONFIG_BCMGENET=m
CONFIG_BGMAC_BCMA=y
CONFIG_SYSTEMPORT=m
CONFIG_AT803X_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_DP83867_PHY=y
-CONFIG_USB_BRCMSTB=m
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8152=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=m
CONFIG_SPI_ATMEL=m
CONFIG_SPI_ATMEL_QUADSPI=m
CONFIG_SPI_BCM2835=y
CONFIG_SPMI=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_AS3722=y
-CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_MSM=y
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27XXX=m
-CONFIG_BATTERY_ACER_A500=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=y
+CONFIG_BATTERY_ACER_A500=m
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_MFD_ACER_A500_EC=m
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_STM32_LPTIMER=m
CONFIG_MFD_STPMIC1=y
+CONFIG_MFD_ACER_A500_EC=m
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_ASPEED=m
-CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_ATMEL_ISC=m
+CONFIG_VIDEO_ATMEL_XISC=m
+CONFIG_VIDEO_ATMEL_ISI=m
+CONFIG_VIDEO_MICROCHIP_CSI2DC=m
+CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_VIDEO_TEGRA_VDE=m
CONFIG_VIDEO_RENESAS_CEU=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_RENESAS_FDP1=m
+CONFIG_VIDEO_RENESAS_JPU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_VIDEO_RCAR_VIN=m
-CONFIG_VIDEO_ATMEL_ISC=m
-CONFIG_VIDEO_ATMEL_XISC=m
-CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_VIDEO_MICROCHIP_CSI2DC=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_STI_BDISP=m
-CONFIG_VIDEO_STI_HVA=m
CONFIG_VIDEO_STI_DELTA=m
-CONFIG_VIDEO_RENESAS_FDP1=m
-CONFIG_VIDEO_RENESAS_JPU=m
-CONFIG_VIDEO_RENESAS_VSP1=m
-CONFIG_VIDEO_TEGRA_VDE=m
+CONFIG_VIDEO_STI_HVA=m
+CONFIG_VIDEO_STM32_DCMI=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_ADV7180=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
-CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-CONFIG_DRM_LVDS_CODEC=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_LVDS_CODEC=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_IMX_TVE=m
CONFIG_DRM_IMX_LDB=m
CONFIG_DRM_IMX_HDMI=m
+CONFIG_DRM_V3D=m
CONFIG_DRM_VC4=m
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_MXSFB=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_TEGRA=m
+CONFIG_USB_BRCMSTB=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_EXYNOS=m
CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_ACER_A500=m
CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
+CONFIG_PHY_BRCM_USB=m
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
-CONFIG_PHY_BRCM_USB=m
CONFIG_PHY_MMP3_USB=m
CONFIG_PHY_LAN966X_SERDES=m
CONFIG_PHY_CPCAP_USB=m
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_SLUB_DEBUG is not set
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V6 is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_PCI=y
CONFIG_MV643XX_ETH=y
# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_MARVELL_PHY=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
+# CONFIG_SLUB_DEBUG is not set
CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
CONFIG_MACH_RD88F5182_DT=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_LSCHL=y
CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
CONFIG_MACH_D2NET_DT=y
CONFIG_MACH_NET2BIG=y
CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_PKTGEN=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
+CONFIG_PCI_MVEBU=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_MV=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
-CONFIG_MWL8K=m
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
+CONFIG_MWL8K=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_PRINTK_TIME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_USER=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MXS=y
CONFIG_AEABI=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CRC7=m
CONFIG_FONTS=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_PROVE_LOCKING=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_ASSABET=y
CONFIG_ASSABET_NEPONSET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_SA1111=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x80000
CONFIG_ZBOOT_ROM_BSS=0xc1000000
CONFIG_ZBOOT_ROM=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_SA1111=y
CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_SMC=y
+CONFIG_PCMCIA_PCNET=y
CONFIG_SMC9194=y
CONFIG_SMC91X=y
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_SERIAL_NONSTANDARD=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_ARCH_FOOTBRIDGE=y
CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
CONFIG_DEPRECATED_PARAM_STRUCT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=0x801"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_FB=y
CONFIG_FB_CYBER2000=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_WAVEARTIST=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_NOMADIK=y
CONFIG_MACH_NOMADIK_8815NHK=y
CONFIG_AEABI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_DES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLOB=y
+# CONFIG_KALLSYMS is not set
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ARCH_OMAP730=y
CONFIG_ARCH_OMAP850=y
CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
-CONFIG_MACH_HERALD=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_MACH_OMAP_OSK=y
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_MACH_OMAP_FSAMPLE=y
-CONFIG_MACH_VOICEBLUE=y
CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_MACH_OMAP_PALMTT=y
CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_OMAP_CF=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
# CONFIG_SUSPEND is not set
+CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
+CONFIG_PCCARD=y
+CONFIG_OMAP_CF=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_CONNECTOR=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=m
CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_PHYLIB=y
CONFIG_SMC91X=y
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_UTF8=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_USER=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_ARCH_MULTI_V6=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_SMP=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=y
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_ZSMALLOC=m
CONFIG_NET=y
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_DEVICES=y
-CONFIG_IR_SPI=m
-CONFIG_IR_RX51=m
CONFIG_IR_GPIO_TX=m
CONFIG_IR_PWM_TX=m
+CONFIG_IR_RX51=m
+CONFIG_IR_SPI=m
CONFIG_MEDIA_SUPPORT=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_OMAP3=m
-CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_MT9P031=m
+CONFIG_VIDEO_TVP5150=m
CONFIG_DRM=m
CONFIG_DRM_OMAP=m
CONFIG_OMAP5_DSS_HDMI=y
CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_SCHEDSTATS=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V6 is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ORION5X=y
-CONFIG_ARCH_ORION5X_DT=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
CONFIG_MACH_RD88F5182_DT=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2_DT=y
-CONFIG_MACH_D2NET=y
-CONFIG_MACH_BIGDISK=y
CONFIG_MACH_NET2BIG=y
-CONFIG_MACH_MSS2=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_IPV6 is not set
CONFIG_NET_DSA=y
CONFIG_NET_PKTGEN=m
+# CONFIG_VGA_ARB is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_I2C_MV64XXX=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM75=y
-# CONFIG_VGA_ARB is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+# CONFIG_SLUB_DEBUG is not set
CONFIG_LATENCYTOP=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_T10DIF=y
CONFIG_PERF_EVENTS=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_STRICT_MODULE_RWX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OXNAS=y
CONFIG_MACH_OX820=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-CONFIG_CMA=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_SECCOMP=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_PXA_PALM=y
# CONFIG_MACH_PALMTX is not set
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_USER=y
CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_DEBUG_USER=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_PCM027=y
CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_BLK_DEV is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_15=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
# CONFIG_SHMEM is not set
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_PLEB=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+# CONFIG_SWAP is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
CONFIG_MACH_ASPENITE=y
CONFIG_MACH_ZYLONITE2=y
CONFIG_MACH_AVENGERS_LITE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MMP=y
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_PXA_IDP=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_FB_PXA=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
+CONFIG_MACH_PXA3XX_DT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_MARVELL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DA9030=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
CONFIG_LOGO=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
+CONFIG_ARCH_MMP=y
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
CONFIG_MACH_TAVOREVB=y
CONFIG_MACH_TTC_DKB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
CONFIG_FPE_NWFPE=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
+# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=y
CONFIG_LOGO=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_TMPFS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_MMP_UART2=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_CMDLINE_PARTITION=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_MACH_ZYLONITE300=y
-CONFIG_MACH_ZYLONITE320=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_ARCH_VIPER=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_MACH_BALLOON3=y
-CONFIG_MACH_CSB726=y
-CONFIG_CSB726_CSB701=y
-CONFIG_MACH_EXEDA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_MACH_CAPC7117=y
CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_XCEP=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4WL=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_MACH_COLIBRI_PXA270_INCOME=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_MACH_COLIBRI320=y
-CONFIG_MACH_COLIBRI_EVALBOARD=y
-CONFIG_MACH_VPAC270=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_H5000=y
-CONFIG_MACH_HIMALAYA=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_MACH_MIOA701=y
-CONFIG_PXA_EZX=y
-CONFIG_MACH_MP900C=y
-CONFIG_ARCH_PXA_PALM=y
CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
CONFIG_MACH_AKITA=y
CONFIG_MACH_BORZOI=y
-CONFIG_MACH_TOSA=y
-CONFIG_TOSA_BT=m
-CONFIG_TOSA_USE_EXT_KEYCODES=y
-CONFIG_MACH_ICONTROL=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_ZIPIT2=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCCARD=m
-CONFIG_YENTA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PREEMPT=y
+CONFIG_PXA_SYSTEMS_CPLDS=y
CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_CMDLINE="root=/dev/ram0 ro"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_ARM_PXA2xx_CPUFREQ=m
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
CONFIG_BINFMT_MISC=y
+CONFIG_SLOB=y
+# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_VLAN_8021Q=m
CONFIG_IEEE802154=y
CONFIG_DNS_RESOLVER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+CONFIG_PCMCIA_PXA2XX=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_AR7_PARTS=m
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AFS_PARTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CMDLINE_PARTS=m
-CONFIG_MTD_AFS_PARTS=m
-CONFIG_MTD_OF_PARTS=m
-CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_BLOCK=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
+CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PXA2XX=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_DOCG3=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_SHARPSL=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_MARVELL=m
CONFIG_MTD_NAND_CM_X270=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_MTD_NAND_BRCMNAND=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_BLOCK=y
CONFIG_ICS932S401=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
-CONFIG_IIO=m
-CONFIG_AD5446=m
CONFIG_EEPROM_AT24=m
CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SCSI=y
CONFIG_SMSC911X=m
CONFIG_STMMAC_ETH=m
CONFIG_PHYLIB=y
-CONFIG_AT803X_PHY=m
-CONFIG_MARVELL_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_AT803X_PHY=m
CONFIG_MDIO_BITBANG=y
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_CS=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
CONFIG_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
CONFIG_RT2X00=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_MOUSEDEV=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_PXA27x=m
-CONFIG_KEYBOARD_PXA930_ROTARY=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
-CONFIG_MOUSE_PXA930_TRKBALL=m
CONFIG_MOUSE_NAVPOINT_PXA27x=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO=m
-CONFIG_SERIO_SA1111=m
CONFIG_LEGACY_PTY_COUNT=8
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_GPIO=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_XILINX=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_SPI_SPIDEV=m
CONFIG_PPS=y
CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
+CONFIG_HTC_EGPIO=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_BATTERY_SBS=m
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC_DEV=m
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=m
-CONFIG_CROS_EC_I2C=m
-CONFIG_CROS_EC_SPI=m
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
-CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_PXA27x=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_PXA27x=m
CONFIG_DRM=m
+CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_PXA3XX_GCU=m
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
+CONFIG_SND_SEQUENCER=m
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA_SOC_SSP=m
CONFIG_SND_PXA2XX_SOC_SPITZ=m
-CONFIG_SND_PXA2XX_SOC_Z2=m
-CONFIG_SND_PXA2XX_SOC_POODLE=m
-CONFIG_SND_PXA2XX_SOC_TOSA=m
-CONFIG_SND_PXA2XX_SOC_E740=m
-CONFIG_SND_PXA2XX_SOC_E750=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_PXA2XX_SOC_PALM27X=y
-CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_PXA2XX_SOC_HX4700=m
-CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
-CONFIG_SND_PXA2XX_SOC_MIOA701=m
CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8731_I2C=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SOUND_PRIME=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_GPIO_VBUS=m
CONFIG_USB_ISP1301=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_DW_DMAC=m
CONFIG_UIO=y
CONFIG_CROS_EC_CHARDEV=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
+CONFIG_CROS_EC_I2C=m
+CONFIG_CROS_EC_SPI=m
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_PM_DEVFREQ=y
CONFIG_EXTCON=y
CONFIG_MEMORY=y
+CONFIG_IIO=m
+CONFIG_AD5446=m
CONFIG_PWM=y
CONFIG_PWM_PXA=m
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_FRAME_WARN=0
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_TIMER_STATS=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_DEBUG_USER=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=m
CONFIG_FONTS=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_MINI_4x6=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MDM9615=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_QCOM=y
CONFIG_SMP=y
-CONFIG_PREEMPT=y
+CONFIG_ARM_PSCI=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_QCOM=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
+CONFIG_MTD_QCOMSMEM_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_QCOMSMEM_PARTS=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
-CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_GPIOLIB=y
+CONFIG_PINCTRL_SDX55=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_CHARGER_BQ24190=m
CONFIG_THERMAL=y
CONFIG_QCOM_TSENS=y
+CONFIG_WATCHDOG=y
+CONFIG_QCOM_WDT=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_DRM=y
CONFIG_DRM_MSM=m
CONFIG_DRM_PANEL_EDP=y
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LP855X=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MSM=y
CONFIG_USB_ACM=y
+CONFIG_USB_DWC3=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_ETH=m
-CONFIG_USB_DWC3=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
CONFIG_QCOM_A7PLL=y
CONFIG_QCOM_CLK_APCS_SDX55=y
CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_CLK_RPMH=y
CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_QCOM_CLK_RPMH=y
CONFIG_APQ_MMCC_8084=y
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_LCC_806X=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_SDX_GCC_55=y
-CONFIG_MSM_IOMMU=y
-CONFIG_ARM_SMMU=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
CONFIG_QCOM_APCS_IPC=y
+CONFIG_MSM_IOMMU=y
+CONFIG_ARM_SMMU=y
CONFIG_REMOTEPROC=y
CONFIG_QCOM_ADSP_PIL=y
CONFIG_QCOM_Q6V5_PAS=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_OCMEM=y
CONFIG_QCOM_PM=y
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
-CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_IIO=y
CONFIG_PWM=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_QCOM_QMP=y
+CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
+CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_QCOM_QFPROM=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_QCOM=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_DEV_QCOM_RNG=m
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
# CONFIG_SCHED_DEBUG is not set
-CONFIG_WATCHDOG=y
-CONFIG_QCOM_WDT=y
-CONFIG_ARM_PSCI=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPUFREQ_DT=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_FULL=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_REALVIEW=y
CONFIG_MACH_REALVIEW_EB=y
CONFIG_VFP=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_RPC=y
CONFIG_CPU_SA110=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_ARXESCSI=m
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_RISCPC=y
# CONFIG_SERIO_SERPORT is not set
+CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_ACORN=y
-CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_FB=y
CONFIG_FB_ACORN=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_ACORN_8x8=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SOUND_PRIME=m
CONFIG_VFAT_FS=m
CONFIG_ADFS_FS=y
CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_BSD_DISKLABEL=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_KOI8_R=m
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_ACORN_8x8=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_8250=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_RX1950=y
CONFIG_MACH_SMDK2443=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_APM_EMULATION=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_DEV_BUS=m
CONFIG_PRINTER=y
CONFIG_PPDEV=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_S3C64XX=y
-CONFIG_MACH_SMDK6400=y
-CONFIG_MACH_ANW6410=y
-CONFIG_MACH_MINI6410=y
-CONFIG_MACH_REAL6410=y
-CONFIG_MACH_SMDK6410=y
-CONFIG_MACH_NCP=y
-CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ5=y
-CONFIG_MACH_SMARTQ7=y
CONFIG_MACH_WLF_CRAGG_6410=y
CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
CONFIG_VFP=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NETDEVICES=y
CONFIG_BRCMFMAC=m
CONFIG_INPUT_EVDEV=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ATMEL_ISC=y
CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_IO_URING is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_SAMA7G5=y
CONFIG_ATMEL_CLOCKSOURCE_TCB=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_COREDUMP is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
CONFIG_CMA=y
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=32
CONFIG_CMA_ALIGNMENT=9
+# CONFIG_DEBUG_MISC is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_MISC is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_SHANNON=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_JFFS2_FS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_USER=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
CONFIG_ARCH_RENESAS=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_SMP=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_RENESAS_RZAWDT=y
+CONFIG_RENESAS_RZN1WDT=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_STMPE=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_SH=y
+CONFIG_RTC_DRV_RZN1=y
CONFIG_DMADEVICES=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_LOCALVERSION="oe1"
CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
CONFIG_ARCH_SA1100=y
CONFIG_SA1100_SIMPAD=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRTTY_SIR=m
-CONFIG_SA1100_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
CONFIG_INPUT_EVDEV=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_REISERFS_FS=m
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_OF_OVERLAY=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ALTERA_TSE=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_SPIDEV=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SUNPLUS=y
+# CONFIG_VDSO is not set
+CONFIG_SMP=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
# CONFIG_SWP_EMULATE is not set
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_SPEAR13XX=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_SPEAR13XX=y
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR3XX=y
CONFIG_MACH_SPEAR300=y
CONFIG_MACH_SPEAR310=y
CONFIG_MACH_SPEAR320=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_MTD=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR6XX=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR6XX=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_MTD=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
CONFIG_MACH_AKITA=y
CONFIG_MACH_BORZOI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=y
CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_SPI=y
CONFIG_SPI_PXA2XX=y
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
CONFIG_USB=m
CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=m
CONFIG_NFS_V4=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_MMU is not set
CONFIG_ARCH_STM32=y
CONFIG_DRAM_BASE=0x90000000
CONFIG_FLASH_MEM_BASE=0x08000000
CONFIG_FLASH_SIZE=0x00200000
-CONFIG_PREEMPT=y
# CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_XIP_KERNEL=y
CONFIG_XIP_PHYS_ADDR=0x08008000
CONFIG_BINFMT_FLAT=y
# CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_NLS=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SLUB_DEBUG is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRYPTO=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SUN4I_CSI=y
CONFIG_VIDEO_SUN6I_CSI=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SUN8I_DEINTERLACE=y
CONFIG_VIDEO_SUN8I_ROTATE=y
CONFIG_DRM=y
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
# CONFIG_ELF_CORE is not set
# CONFIG_SHMEM is not set
-CONFIG_SLOB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_KALLSYMS is not set
CONFIG_ARCH_MULTI_V4T=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_S3C24XX=y
CONFIG_MACH_TCT_HAMMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_LL=y
CONFIG_CRC_CCITT=y
+CONFIG_DEBUG_LL=y
# CONFIG_ELF_CORE is not set
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
CONFIG_ARCH_TEGRA=y
CONFIG_SMP=y
CONFIG_HIGHMEM=y
CONFIG_ARM_TEGRA_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
-CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEGRA_GMI=y
+CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_MTD=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
+CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
-CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
+CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_SPI=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_BATTERY_SBS=y
-CONFIG_CHARGER_BQ24735=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_CHARGER_GPIO=y
+CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_TEGRA_VDE=y
CONFIG_DRM=y
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_TEGRA=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_STAGING_MEDIA=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_TEGRA_VDE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
-CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_VM=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_TRIZEPS_PXA=y
CONFIG_MACH_TRIZEPS4=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_CFG80211=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_ONENAND=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_DM9000=y
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
+CONFIG_SND_SEQUENCER=y
CONFIG_SND_PXA2XX_AC97=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_USB_HID is not set
CONFIG_NFSD_V4=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
CONFIG_KEYS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_NFSD=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
+CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_VMSPLIT_2G=y
CONFIG_NR_CPUS=8
CONFIG_ARM_PSCI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAMA0"
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_VIRTIO_BLK=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_HW is not set
CONFIG_DMA_CMA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_USER=y
CONFIG_CMDLINE="console=/dev/ttyLP2"
CONFIG_XIP_KERNEL=y
CONFIG_XIP_PHYS_ADDR=0x0f000080
+# CONFIG_SUSPEND is not set
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_SUSPEND is not set
# CONFIG_UEVENT_HELPER is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=13
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
# CONFIG_ELF_CORE is not set
# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_ARCH_VIPER=y
CONFIG_IWMMXT=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_FPE_FASTFPE=y
CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_PXA2XX=m
CONFIG_FW_LOADER=m
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_BLK_DEV_LOOP=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=m
# CONFIG_SATA_PMP is not set
CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_UINPUT=m
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_NR_UARTS=5
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
+CONFIG_CRC_T10DIF=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_T10DIF=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_WM8750=y
CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
CONFIG_MFD_SYSCON=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_LOCALVERSION=".xcep-itech"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_XCEP=y
CONFIG_IWMMXT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
CONFIG_FPE_NWFPE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+CONFIG_SLOB=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_UTF8=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=m
CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
CONFIG_SYSVIPC=y
CONFIG_TINY_RCU=y
CONFIG_LOG_BUF_SHIFT=13
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CFG80211=m
CONFIG_LIB80211=m
CONFIG_MAC80211=m
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_PXA2XX=m
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_EEPROM_AT24=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_ATA=m
# CONFIG_SATA_PMP is not set
CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_DM9000=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
CONFIG_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_RT2X00=m
CONFIG_RT73USB=m
CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=7
CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_CRC_T10DIF=m
CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
#else
#define MAX_DMA_ADDRESS ({ \
extern phys_addr_t arm_dma_zone_size; \
- arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+ arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
#endif
extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
void __arm_iomem_set_ro(void __iomem *ptr, size_t size);
-extern void __iounmap(volatile void __iomem *addr);
extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
unsigned int, void *);
-extern void (*arch_iounmap)(volatile void __iomem *);
/*
* Bad read/write accesses...
#define ioremap_wc ioremap_wc
#define ioremap_wt ioremap_wc
-void iounmap(volatile void __iomem *iomem_cookie);
+void iounmap(volatile void __iomem *io_addr);
#define iounmap iounmap
void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
{
__arch_jump_label_transform(entry, type, false);
}
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- __arch_jump_label_transform(entry, type, true);
-}
* Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
*/
ENTRY(_find_next_zero_bit_le)
- teq r1, #0
- beq 3b
+ cmp r2, r1
+ bhs 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
ARM( ldrb r3, [r0, r2, lsr #3] )
* Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
*/
ENTRY(_find_next_bit_le)
- teq r1, #0
- beq 3b
+ cmp r2, r1
+ bhs 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
ARM( ldrb r3, [r0, r2, lsr #3] )
ENDPROC(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be)
- teq r1, #0
- beq 3b
+ cmp r2, r1
+ bhs 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
ENDPROC(_find_first_bit_be)
ENTRY(_find_next_bit_be)
- teq r1, #0
- beq 3b
+ cmp r2, r1
+ bhs 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
return res;
}
+bool sam_linux_is_optee_available(void)
+{
+ /* If optee has been detected, then we are running in normal world */
+ return optee_available;
+}
+
void __init sam_secure_init(void)
{
struct device_node *np;
void __init sam_secure_init(void);
struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1);
+bool sam_linux_is_optee_available(void);
#endif /* SAM_SECURE_H */
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/outercache.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "sam_secure.h"
+static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ /* OP-TEE configures the L2 cache and does not allow modifying it yet */
+}
+
+static void __init sama5_secure_cache_init(void)
+{
+ sam_secure_init();
+ if (sam_linux_is_optee_available())
+ outer_cache.write_sec = sama5_l2c310_write_sec;
+}
+
static void __init sama5_dt_device_init(void)
{
of_platform_default_populate(NULL, NULL, NULL);
static void __init sama5d2_init(void)
{
of_platform_default_populate(NULL, NULL, NULL);
- sam_secure_init();
sama5d2_pm_init();
}
DT_MACHINE_START(sama5d2, "Atmel SAMA5")
/* Maintainer: Atmel */
.init_machine = sama5d2_init,
+ .init_early = sama5_secure_cache_init,
.dt_compat = sama5d2_compat,
.l2c_aux_mask = ~0UL,
MACHINE_END
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
select ARM_TIMER_SP804
- select THERMAL
- select THERMAL_OF
help
Support for Broadcom Northstar Plus SoC.
Broadcom Northstar Plus family of SoCs are used for switching control
The base chip is BCM53573 and there are some packaging modifications
like BCM47189 and BCM47452.
-config ARCH_BCM_63XX
- bool "Broadcom BCM63xx DSL SoC"
- depends on ARCH_MULTI_V7
- select ARCH_HAS_RESET_CONTROLLER
- select ARM_ERRATA_754322
- select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select ARM_GLOBAL_TIMER
- select CACHE_L2X0
- select HAVE_ARM_ARCH_TIMER
- select HAVE_ARM_TWD if SMP
- select HAVE_ARM_SCU if SMP
- help
- This enables support for systems based on Broadcom DSL SoCs.
- It currently supports the 'BCM63XX' ARM-based family, which includes
- the BCM63138 variant.
-
config ARCH_BRCMSTB
bool "Broadcom BCM7XXX based boards"
depends on ARCH_MULTI_V7
This enables support for Broadcom ARM-based set-top box chipsets,
including the 7445 family of chips.
-config ARCH_BCMBCA
- bool "Broadcom Broadband SoC"
+menuconfig ARCH_BCMBCA
+ bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
This enables support for Broadcom BCA ARM-based broadband chipsets,
including the DSL, PON and Wireless family of chips.
+
+comment "BCMBCA sub platforms"
+
+if ARCH_BCMBCA
+
+config ARCH_BCMBCA_CORTEXA7
+ bool "Cortex-A7 SoCs"
+ help
+ Say Y if you intend to run the kernel on a Broadcom Broadband ARM A7
+ based chipset.
+
+ This enables support for Broadcom BCA ARM A7 broadband chipsets,
+ including various DSL, PON and Wireless family of chips.
+
+config ARCH_BCMBCA_CORTEXA9
+ bool "Cortex-A9 SoCS"
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GLOBAL_TIMER
+ select CACHE_L2X0
+ select HAVE_ARM_TWD if SMP
+ select HAVE_ARM_SCU if SMP
+ help
+ Say Y if you intend to run the kernel on a Broadcom Broadband ARM A9
+ based BCA chipset.
+
+ This enables support for Broadcom BCA ARM A9 broadband chipset. Currently
+ only DSL chip BCM63138.
+
+config ARCH_BCMBCA_BRAHMAB15
+ bool "Brahma-B15 SoCs"
+ select ARM_ERRATA_798181 if SMP
+ help
+ Say Y if you intend to run the kernel on a Broadcom Broadband ARM B15
+ based BCA chipset.
+
+ This enables support for Broadcom BCA ARM B15 broadband chipset. Currently
+ only DSL chip BCM63148.
+
+endif
+
endif
obj-$(CONFIG_SMP) += platsmp.o
endif
-# BCM63XXx
-ifeq ($(CONFIG_ARCH_BCM_63XX),y)
-obj-y += bcm63xx.o
-obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o
-endif
-
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
CFLAGS_platsmp-brcmstb.o += -march=armv7-a
obj-y += brcmstb.o
obj-$(CONFIG_SMP) += platsmp-brcmstb.o
endif
+
+# BCMBCA
+ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o
+endif
+++ /dev/null
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-static const char * const bcm63xx_dt_compat[] = {
- "brcm,bcm63138",
- NULL
-};
-
-DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
- .dt_compat = bcm63xx_dt_compat,
- .l2c_aux_val = 0,
- .l2c_aux_mask = ~0,
-MACHINE_END
return -ENODEV;
prop_val = of_get_address(node, 0, &prop_size, NULL);
+ of_node_put(node);
if (!prop_val)
return -EINVAL;
menuconfig ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
depends on ARCH_MULTI_V6
+ depends on ATAGS && UNUSED_BOARD_FILES
select ARM_GIC
help
Support for Cavium Networks CNS3XXX platform.
comment "DaVinci Core Type"
-config ARCH_DAVINCI_DM644x
- bool "DaVinci 644x based system"
- select DAVINCI_AINTC
- select ARCH_DAVINCI_DMx
-
config ARCH_DAVINCI_DM355
bool "DaVinci 355 based system"
- select DAVINCI_AINTC
- select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM646x
- bool "DaVinci 646x based system"
+ depends on ATAGS && UNUSED_BOARD_FILES
select DAVINCI_AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+ depends on ATAGS
select ARCH_DAVINCI_DA8XX
# needed on silicon revs 1.0, 1.1:
select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+ depends on ATAGS
select ARCH_DAVINCI_DA8XX
select DAVINCI_CP_INTC
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
+ depends on ATAGS && UNUSED_BOARD_FILES
select DAVINCI_AINTC
select ARCH_DAVINCI_DMx
Say y here to include support for TI DaVinci DA850 based using
Flattened Device Tree. More information at Documentation/devicetree
-config MACH_DAVINCI_EVM
- bool "TI DM644x EVM"
- default ARCH_DAVINCI_DM644x
- depends on ARCH_DAVINCI_DM644x
- help
- Configure this option to specify the whether the board used
- for development is a DM644x EVM
-
-config MACH_SFFSDR
- bool "Lyrtech SFFSDR"
- depends on ARCH_DAVINCI_DM644x
- help
- Say Y here to select the Lyrtech Small Form Factor
- Software Defined Radio (SFFSDR) board.
-
-config MACH_NEUROS_OSD2
- bool "Neuros OSD2 Open Television Set Top Box"
- depends on ARCH_DAVINCI_DM644x
- help
- Configure this option to specify the whether the board used
- for development is a Neuros OSD2 Open Set Top Box.
-
config MACH_DAVINCI_DM355_EVM
bool "TI DM355 EVM"
default ARCH_DAVINCI_DM355
Configure this option to specify the whether the board used
for development is a DM355 Leopard board.
-config MACH_DAVINCI_DM6467_EVM
- bool "TI DM6467 EVM"
- default ARCH_DAVINCI_DM646x
- depends on ARCH_DAVINCI_DM646x
- select MACH_DAVINCI_DM6467TEVM
- help
- Configure this option to specify the whether the board used
- for development is a DM6467 EVM
-
-config MACH_DAVINCI_DM6467TEVM
- bool
-
config MACH_DAVINCI_DM365_EVM
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
+ depends on ATAGS && UNUSED_BOARD_FILES
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X if I2C
help
config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+ depends on ATAGS && UNUSED_BOARD_FILES
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
help
config MACH_MITYOMAPL138
bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
depends on ARCH_DAVINCI_DA850
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
config MACH_OMAPL138_HAWKBOARD
bool "TI AM1808 / OMAPL-138 Hawkboard platform"
depends on ARCH_DAVINCI_DA850
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o
# Board specific
obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
-obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
-obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o
obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
+++ /dev/null
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nvmem-provider.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/export.h>
-#include <linux/leds.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <media/i2c/tvp514x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include "davinci.h"
-#include "common.h"
-#include "mux.h"
-#include "serial.h"
-#include "irqs.h"
-
-#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
-#define LXT971_PHY_ID (0x001378e2)
-#define LXT971_PHY_MASK (0xfffffff0)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
- {
- .name = "bootloader",
- .offset = 0,
- .size = 5 * SZ_64K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next 1 sectors */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
- .width = 2,
- .parts = davinci_evm_norflash_partitions,
- .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
- .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &davinci_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = &davinci_evm_norflash_resource,
-};
-
-/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
- * It may used instead of the (default) NOR chip to boot, using TI's
- * tools to install the secondary boot loader (UBL) and U-Boot.
- */
-static struct mtd_partition davinci_evm_nandflash_partition[] = {
- /* Bootloader layout depends on whose u-boot is installed, but we
- * can hide all the details.
- * - block 0 for u-boot environment ... in mainline u-boot
- * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
- * - blocks 6...? for u-boot
- * - blocks 16..23 for u-boot environment ... in TI's u-boot
- */
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K + SZ_128K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* Kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- /* File system (older GIT kernels started this on the 5MB mark) */
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
- /* A few blocks at end hold a flash BBT ... created by TI's CCS
- * using flashwriter_nand.out, but ignored by TI's versions of
- * Linux and u-boot. We boot faster by using them.
- */
-};
-
-static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
- .wsetup = 20,
- .wstrobe = 40,
- .whold = 20,
- .rsetup = 10,
- .rstrobe = 40,
- .rhold = 10,
- .ta = 40,
-};
-
-static struct davinci_nand_pdata davinci_evm_nandflash_data = {
- .core_chipsel = 0,
- .parts = davinci_evm_nandflash_partition,
- .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 1,
- .bbt_options = NAND_BBT_USE_FLASH,
- .timing = &davinci_evm_nandflash_timing,
-};
-
-static struct resource davinci_evm_nandflash_resource[] = {
- {
- .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource davinci_evm_aemif_resource[] = {
- {
- .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct aemif_abus_data davinci_evm_aemif_abus_data[] = {
- {
- .cs = 1,
- },
-};
-
-static struct platform_device davinci_evm_nandflash_devices[] = {
- {
- .name = "davinci_nand",
- .id = 0,
- .dev = {
- .platform_data = &davinci_evm_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
- .resource = davinci_evm_nandflash_resource,
- },
-};
-
-static struct aemif_platform_data davinci_evm_aemif_pdata = {
- .abus_data = davinci_evm_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data),
- .sub_devices = davinci_evm_nandflash_devices,
- .num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices),
-};
-
-static struct platform_device davinci_evm_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &davinci_evm_aemif_pdata,
- },
- .resource = davinci_evm_aemif_resource,
- .num_resources = ARRAY_SIZE(davinci_evm_aemif_resource),
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
- .name = "davincifb",
- .id = -1,
- .dev = {
- .dma_mask = &davinci_fb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = 0,
-};
-
-static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
- {
- .index = 0,
- .name = "Composite",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
- {
- .index = 1,
- .name = "S-Video",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route dm644xevm_tvp5146_routes[] = {
- {
- .input = INPUT_CVBS_VI2B,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
- {
- .input = INPUT_SVIDEO_VI2C_VI1C,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-};
-
-static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
- {
- .name = "tvp5146",
- .grp_id = 0,
- .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
- .inputs = dm644xevm_tvp5146_inputs,
- .routes = dm644xevm_tvp5146_routes,
- .can_route = 1,
- .ccdc_if_params = {
- .if_type = VPFE_BT656,
- .hdpol = VPFE_PINPOL_POSITIVE,
- .vdpol = VPFE_PINPOL_POSITIVE,
- },
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &dm644xevm_tvp5146_pdata,
- },
- },
-};
-
-static struct vpfe_config dm644xevm_capture_cfg = {
- .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
- .i2c_adapter_id = 1,
- .sub_devs = dm644xevm_vpfe_sub_devs,
- .card_name = "DM6446 EVM",
- .ccdc = "DM6446 CCDC",
-};
-
-static struct platform_device rtc_dev = {
- .name = "rtc_davinci_evm",
- .id = -1,
-};
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
- { .name = "DS8", .active_low = 1,
- .default_trigger = "heartbeat", },
- { .name = "DS7", .active_low = 1, },
- { .name = "DS6", .active_low = 1, },
- { .name = "DS5", .active_low = 1, },
- { .name = "DS4", .active_low = 1, },
- { .name = "DS3", .active_low = 1, },
- { .name = "DS2", .active_low = 1,
- .default_trigger = "mmc0", },
- { .name = "DS1", .active_low = 1,
- .default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- struct gpio_led *leds = evm_leds;
- int status;
-
- while (ngpio--) {
- leds->gpio = gpio++;
- leds++;
- }
-
- /* what an extremely annoying way to be forced to handle
- * device unregistration ...
- */
- evm_led_dev = platform_device_alloc("leds-gpio", 0);
- platform_device_add_data(evm_led_dev,
- &evm_led_data, sizeof evm_led_data);
-
- evm_led_dev->dev.parent = &client->dev;
- status = platform_device_add(evm_led_dev);
- if (status < 0) {
- platform_device_put(evm_led_dev);
- evm_led_dev = NULL;
- }
- return status;
-}
-
-static void
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- if (evm_led_dev) {
- platform_device_unregister(evm_led_dev);
- evm_led_dev = NULL;
- }
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
- .gpio_base = PCF_Uxx_BASE(0),
- .setup = evm_led_setup,
- .teardown = evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
- char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
- strcpy(buf, s);
- return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- int status;
-
- /* export dip switch option */
- sw_gpio = gpio + 7;
- status = gpio_request(sw_gpio, "user_sw");
- if (status == 0)
- status = gpio_direction_input(sw_gpio);
- if (status == 0)
- status = device_create_file(&client->dev, &dev_attr_user_sw);
- else
- gpio_free(sw_gpio);
- if (status != 0)
- sw_gpio = -EINVAL;
-
- /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
- gpio_request(gpio + 3, "pll_fs2");
- gpio_direction_output(gpio + 3, 0);
-
- gpio_request(gpio + 2, "pll_fs1");
- gpio_direction_output(gpio + 2, 0);
-
- gpio_request(gpio + 1, "pll_sr");
- gpio_direction_output(gpio + 1, 0);
-
- return 0;
-}
-
-static void
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 1);
- gpio_free(gpio + 2);
- gpio_free(gpio + 3);
-
- if (sw_gpio > 0) {
- device_remove_file(&client->dev, &dev_attr_user_sw);
- gpio_free(sw_gpio);
- }
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
- .gpio_base = PCF_Uxx_BASE(1),
- .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
- .setup = evm_u18_setup,
- .teardown = evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- /* p0 = nDRV_VBUS (initial: don't supply it) */
- gpio_request(gpio + 0, "nDRV_VBUS");
- gpio_direction_output(gpio + 0, 1);
-
- /* p1 = VDDIMX_EN */
- gpio_request(gpio + 1, "VDDIMX_EN");
- gpio_direction_output(gpio + 1, 1);
-
- /* p2 = VLYNQ_EN */
- gpio_request(gpio + 2, "VLYNQ_EN");
- gpio_direction_output(gpio + 2, 1);
-
- /* p3 = n3V3_CF_RESET (initial: stay in reset) */
- gpio_request(gpio + 3, "nCF_RESET");
- gpio_direction_output(gpio + 3, 0);
-
- /* (p4 unused) */
-
- /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
- gpio_request(gpio + 5, "WLAN_RESET");
- gpio_direction_output(gpio + 5, 1);
-
- /* p6 = nATA_SEL (initial: select) */
- gpio_request(gpio + 6, "nATA_SEL");
- gpio_direction_output(gpio + 6, 0);
-
- /* p7 = nCF_SEL (initial: deselect) */
- gpio_request(gpio + 7, "nCF_SEL");
- gpio_direction_output(gpio + 7, 1);
-
- return 0;
-}
-
-static void
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 7);
- gpio_free(gpio + 6);
- gpio_free(gpio + 5);
- gpio_free(gpio + 3);
- gpio_free(gpio + 2);
- gpio_free(gpio + 1);
- gpio_free(gpio + 0);
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
- .gpio_base = PCF_Uxx_BASE(2),
- .setup = evm_u35_setup,
- .teardown = evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- * - 0x7f00, 6 bytes Ethernet Address
- * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- * - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm644evm_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x7f00,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table dm644evm_nvmem_cell_table = {
- .nvmem_name = "1-00500",
- .cells = dm644evm_nvmem_cells,
- .ncells = ARRAY_SIZE(dm644evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
- .nvmem_name = "1-00500",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 64),
- { }
-};
-
-static const struct software_node eeprom_node = {
- .properties = eeprom_properties,
-};
-
-/*
- * MSP430 supports RTC, card detection, input from IR remote, and
- * a bit more. It triggers interrupts on GPIO(7) from pressing
- * buttons on the IR remote, and for card detect switches.
- */
-static struct i2c_client *dm6446evm_msp;
-
-static int dm6446evm_msp_probe(struct i2c_client *client)
-{
- dm6446evm_msp = client;
- return 0;
-}
-
-static int dm6446evm_msp_remove(struct i2c_client *client)
-{
- dm6446evm_msp = NULL;
- return 0;
-}
-
-static const struct i2c_device_id dm6446evm_msp_ids[] = {
- { "dm6446evm_msp", 0, },
- { /* end of list */ },
-};
-
-static struct i2c_driver dm6446evm_msp_driver = {
- .driver.name = "dm6446evm_msp",
- .id_table = dm6446evm_msp_ids,
- .probe_new = dm6446evm_msp_probe,
- .remove = dm6446evm_msp_remove,
-};
-
-static int dm6444evm_msp430_get_pins(void)
-{
- static const char txbuf[2] = { 2, 4, };
- char buf[4];
- struct i2c_msg msg[2] = {
- {
- .flags = 0,
- .len = 2,
- .buf = (void __force *)txbuf,
- },
- {
- .flags = I2C_M_RD,
- .len = 4,
- .buf = buf,
- },
- };
- int status;
-
- if (!dm6446evm_msp)
- return -ENXIO;
-
- msg[0].addr = dm6446evm_msp->addr;
- msg[1].addr = dm6446evm_msp->addr;
-
- /* Command 4 == get input state, returns port 2 and port3 data
- * S Addr W [A] len=2 [A] cmd=4 [A]
- * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
- */
- status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
- if (status < 0)
- return status;
-
- dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
-
- return (buf[3] << 8) | buf[2];
-}
-
-static int dm6444evm_mmc_get_cd(int module)
-{
- int status = dm6444evm_msp430_get_pins();
-
- return (status < 0) ? status : !(status & BIT(1));
-}
-
-static int dm6444evm_mmc_get_ro(int module)
-{
- int status = dm6444evm_msp430_get_pins();
-
- return (status < 0) ? status : status & BIT(6 + 8);
-}
-
-static struct davinci_mmc_config dm6446evm_mmc_config = {
- .get_cd = dm6444evm_mmc_get_cd,
- .get_ro = dm6444evm_mmc_get_ro,
- .wires = 4,
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
- {
- I2C_BOARD_INFO("dm6446evm_msp", 0x23),
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x38),
- .platform_data = &pcf_data_u2,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x39),
- .platform_data = &pcf_data_u18,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x3a),
- .platform_data = &pcf_data_u35,
- },
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .swnode = &eeprom_node,
- },
- {
- I2C_BOARD_INFO("tlv320aic33", 0x1b),
- },
-};
-
-#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12)
-#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
- .dev_id = "i2c_davinci.1",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda",
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- { }
- },
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
- .gpio_recovery = true,
-};
-
-static void __init evm_init_i2c(void)
-{
- gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
- davinci_init_i2c(&i2c_pdata);
- i2c_add_driver(&dm6446evm_msp_driver);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-#endif
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
- /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
- REGULATOR_SUPPLY("AVDD", "1-001b"),
- REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
- /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
- REGULATOR_SUPPLY("IOVDD", "1-001b"),
- REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
-#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/* venc standard timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
- {
- .name = "ntsc",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_NTSC,
- .interlaced = 1,
- .xres = 720,
- .yres = 480,
- .aspect = {11, 10},
- .fps = {30000, 1001},
- .left_margin = 0x79,
- .upper_margin = 0x10,
- },
- {
- .name = "pal",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_PAL,
- .interlaced = 1,
- .xres = 720,
- .yres = 576,
- .aspect = {54, 59},
- .fps = {25, 1},
- .left_margin = 0x7e,
- .upper_margin = 0x16,
- },
-};
-
-/* venc dv preset timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
- {
- .name = "480p59_94",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
- .interlaced = 0,
- .xres = 720,
- .yres = 480,
- .aspect = {1, 1},
- .fps = {5994, 100},
- .left_margin = 0x80,
- .upper_margin = 0x20,
- },
- {
- .name = "576p50",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_720X576P50,
- .interlaced = 0,
- .xres = 720,
- .yres = 576,
- .aspect = {1, 1},
- .fps = {50, 1},
- .left_margin = 0x7e,
- .upper_margin = 0x30,
- },
-};
-
-/*
- * The outputs available from VPBE + encoders. Keep the order same
- * as that of encoders. First those from venc followed by that from
- * encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more
- * than one output. Userspace applications use index of the array to
- * set an output.
- */
-static struct vpbe_output dm644xevm_vpbe_outputs[] = {
- {
- .output = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .std = VENC_STD_ALL,
- .capabilities = V4L2_OUT_CAP_STD,
- },
- .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
- .default_mode = "ntsc",
- .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
- .modes = dm644xevm_enc_std_timing,
- },
- {
- .output = {
- .index = 1,
- .name = "Component",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
- },
- .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
- .default_mode = "480p59_94",
- .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
- .modes = dm644xevm_enc_preset_timing,
- },
-};
-
-static struct vpbe_config dm644xevm_display_cfg = {
- .module_name = "dm644x-vpbe-display",
- .i2c_adapter_id = 1,
- .osd = {
- .module_name = DM644X_VPBE_OSD_SUBDEV_NAME,
- },
- .venc = {
- .module_name = DM644X_VPBE_VENC_SUBDEV_NAME,
- },
- .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
- .outputs = dm644xevm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
- &davinci_fb_device,
- &rtc_dev,
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
- dm644x_init();
-}
-
-static int davinci_phy_fixup(struct phy_device *phydev)
-{
- unsigned int control;
- /* CRITICAL: Fix for increasing PHY signal drive strength for
- * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
- * signal strength was low causing TX to fail randomly. The
- * fix is to Set bit 11 (Increased MII drive strength) of PHY
- * register 26 (Digital Config register) on this phy. */
- control = phy_read(phydev, 26);
- phy_write(phydev, 26, (control | 0x800));
- return 0;
-}
-
-#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
-
-#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-#define GPIO_nVBUS_DRV 160
-
-static struct gpiod_lookup_table dm644evm_usb_gpio_table = {
- .dev_id = "musb-davinci",
- .table = {
- GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL,
- GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static __init void davinci_evm_init(void)
-{
- int ret;
- struct clk *aemif_clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- dm644x_register_clocks();
-
- regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
- ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
- regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
- ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
- dm644x_init_devices();
-
- ret = dm644x_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- aemif_clk = clk_get(NULL, "aemif");
- clk_prepare_enable(aemif_clk);
-
- if (HAS_ATA) {
- if (HAS_NAND || HAS_NOR)
- pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
- "\tDisable IDE for NAND/NOR support\n");
- davinci_init_ide();
- } else if (HAS_NAND || HAS_NOR) {
- davinci_cfg_reg(DM644X_HPIEN_DISABLE);
- davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
- /* only one device will be jumpered and detected */
- if (HAS_NAND) {
- platform_device_register(&davinci_evm_aemif_device);
-#ifdef CONFIG_I2C
- evm_leds[7].default_trigger = "nand-disk";
-#endif
- if (HAS_NOR)
- pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
- } else if (HAS_NOR)
- platform_device_register(&davinci_evm_norflash_device);
- }
-
- platform_add_devices(davinci_evm_devices,
- ARRAY_SIZE(davinci_evm_devices));
-#ifdef CONFIG_I2C
- nvmem_add_cell_table(&dm644evm_nvmem_cell_table);
- nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1);
- evm_init_i2c();
- davinci_setup_mmc(0, &dm6446evm_mmc_config);
-#endif
- dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
-
- davinci_serial_init(dm644x_serial_device);
- dm644x_init_asp();
-
- /* irlml6401 switches over 1A, in under 8 msec */
- gpiod_add_lookup_table(&dm644evm_usb_gpio_table);
- davinci_setup_usb(1000, 8);
-
- if (IS_BUILTIN(CONFIG_PHYLIB)) {
- soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
- /* Register the fixup for PHY on DaVinci */
- phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
- davinci_phy_fixup);
- }
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
- /* Maintainer: MontaVista Software <source@mvista.com> */
- .atag_offset = 0x100,
- .map_io = davinci_evm_map_io,
- .init_irq = dm644x_init_irq,
- .init_time = dm644x_init_time,
- .init_machine = davinci_evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
+++ /dev/null
-/*
- * TI DaVinci DM646X EVM board
- *
- * Derived from: arch/arm/mach-davinci/board-evm.c
- * Copyright (C) 2006 Texas Instruments.
- *
- * (C) 2007-2008, MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/clk.h>
-#include <linux/export.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define NAND_BLOCK_SIZE SZ_128K
-
-/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
- * and U-Boot environment this avoids dependency on any particular combination
- * of UBL, U-Boot or flashing tools etc.
- */
-static struct mtd_partition davinci_nand_partitions[] = {
- {
- /* UBL, U-Boot with environment */
- .name = "bootloader",
- .offset = MTDPART_OFS_APPEND,
- .size = 16 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- }, {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
-};
-
-static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
- .wsetup = 29,
- .wstrobe = 24,
- .whold = 14,
- .rsetup = 19,
- .rstrobe = 33,
- .rhold = 0,
- .ta = 29,
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
- .core_chipsel = 0,
- .mask_cle = 0x80000,
- .mask_ale = 0x40000,
- .parts = davinci_nand_partitions,
- .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 1,
- .options = 0,
-};
-
-static struct resource davinci_nand_resources[] = {
- {
- .start = DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
- .end = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM646X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(davinci_nand_resources),
- .resource = davinci_nand_resources,
- .dev = {
- .platform_data = &davinci_nand_data,
- },
- },
-};
-
-static struct resource davinci_aemif_resources[] = {
- {
- .start = DM646X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct aemif_abus_data davinci_aemif_abus_data[] = {
- {
- .cs = 1,
- },
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
- .abus_data = davinci_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data),
- .sub_devices = davinci_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &davinci_aemif_pdata,
- },
- .resource = davinci_aemif_resources,
- .num_resources = ARRAY_SIZE(davinci_aemif_resources),
-};
-
-#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- IS_ENABLED(CONFIG_PATA_BK3710))
-
-#ifdef CONFIG_I2C
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST BIT(0)
-#define DM646X_EVM_ATA_PWD BIT(1)
-
-/* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client)
-{
- if (HAS_ATA) {
- u8 data;
- struct i2c_msg msg[2] = {
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = &data,
- },
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = &data,
- },
- };
-
- /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
- i2c_transfer(client->adapter, msg, 1);
- data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
- i2c_transfer(client->adapter, msg + 1, 1);
- }
-
- return 0;
-}
-
-static const struct i2c_device_id cpld_reg_ids[] = {
- { "cpld_reg0", 0, },
- { },
-};
-
-static struct i2c_driver dm6467evm_cpld_driver = {
- .driver.name = "cpld_reg0",
- .id_table = cpld_reg_ids,
- .probe_new = cpld_reg0_probe,
-};
-
-/* LEDS */
-
-static struct gpio_led evm_leds[] = {
- { .name = "DS1", .active_low = 1, },
- { .name = "DS2", .active_low = 1, },
- { .name = "DS3", .active_low = 1, },
- { .name = "DS4", .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int evm_led_setup(struct i2c_client *client, int gpio,
- unsigned int ngpio, void *c)
-{
- struct gpio_led *leds = evm_leds;
- int status;
-
- while (ngpio--) {
- leds->gpio = gpio++;
- leds++;
- }
-
- evm_led_dev = platform_device_alloc("leds-gpio", 0);
- platform_device_add_data(evm_led_dev, &evm_led_data,
- sizeof(evm_led_data));
-
- evm_led_dev->dev.parent = &client->dev;
- status = platform_device_add(evm_led_dev);
- if (status < 0) {
- platform_device_put(evm_led_dev);
- evm_led_dev = NULL;
- }
- return status;
-}
-
-static int evm_led_teardown(struct i2c_client *client, int gpio,
- unsigned ngpio, void *c)
-{
- if (evm_led_dev) {
- platform_device_unregister(evm_led_dev);
- evm_led_dev = NULL;
- }
- return 0;
-}
-
-static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
-
-static int evm_sw_setup(struct i2c_client *client, int gpio,
- unsigned ngpio, void *c)
-{
- int status;
- int i;
- char label[10];
-
- for (i = 0; i < 4; ++i) {
- snprintf(label, 10, "user_sw%d", i);
- status = gpio_request(gpio, label);
- if (status)
- goto out_free;
- evm_sw_gpio[i] = gpio++;
-
- status = gpio_direction_input(evm_sw_gpio[i]);
- if (status)
- goto out_free;
-
- status = gpio_export(evm_sw_gpio[i], 0);
- if (status)
- goto out_free;
- }
- return 0;
-
-out_free:
- for (i = 0; i < 4; ++i) {
- if (evm_sw_gpio[i] != -EINVAL) {
- gpio_free(evm_sw_gpio[i]);
- evm_sw_gpio[i] = -EINVAL;
- }
- }
- return status;
-}
-
-static int evm_sw_teardown(struct i2c_client *client, int gpio,
- unsigned ngpio, void *c)
-{
- int i;
-
- for (i = 0; i < 4; ++i) {
- if (evm_sw_gpio[i] != -EINVAL) {
- gpio_unexport(evm_sw_gpio[i]);
- gpio_free(evm_sw_gpio[i]);
- evm_sw_gpio[i] = -EINVAL;
- }
- }
- return 0;
-}
-
-static int evm_pcf_setup(struct i2c_client *client, int gpio,
- unsigned int ngpio, void *c)
-{
- int status;
-
- if (ngpio < 8)
- return -EINVAL;
-
- status = evm_sw_setup(client, gpio, 4, c);
- if (status)
- return status;
-
- return evm_led_setup(client, gpio+4, 4, c);
-}
-
-static void evm_pcf_teardown(struct i2c_client *client, int gpio,
- unsigned int ngpio, void *c)
-{
- BUG_ON(ngpio < 8);
-
- evm_sw_teardown(client, gpio, 4, c);
- evm_led_teardown(client, gpio+4, 4, c);
-}
-
-static struct pcf857x_platform_data pcf_data = {
- .gpio_base = DAVINCI_N_GPIO+1,
- .setup = evm_pcf_setup,
- .teardown = evm_pcf_teardown,
-};
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- * - 0x7f00, 6 bytes Ethernet Address
- * - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x7f00,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = {
- .nvmem_name = "1-00500",
- .cells = dm646x_evm_nvmem_cells,
- .ncells = ARRAY_SIZE(dm646x_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
- .nvmem_name = "1-00500",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 64),
- { }
-};
-
-static const struct software_node eeprom_node = {
- .properties = eeprom_properties,
-};
-#endif
-
-static u8 dm646x_iis_serializer_direction[] = {
- TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static u8 dm646x_dit_serializer_direction[] = {
- TX_MODE,
-};
-
-static struct snd_platform_data dm646x_evm_snd_data[] = {
- {
- .tx_dma_offset = 0x400,
- .rx_dma_offset = 0x400,
- .op_mode = DAVINCI_MCASP_IIS_MODE,
- .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
- .tdm_slots = 2,
- .serial_dir = dm646x_iis_serializer_direction,
- .asp_chan_q = EVENTQ_0,
- },
- {
- .tx_dma_offset = 0x400,
- .rx_dma_offset = 0,
- .op_mode = DAVINCI_MCASP_DIT_MODE,
- .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
- .tdm_slots = 32,
- .serial_dir = dm646x_dit_serializer_direction,
- .asp_chan_q = EVENTQ_0,
- },
-};
-
-#ifdef CONFIG_I2C
-static struct i2c_client *cpld_client;
-
-static int cpld_video_probe(struct i2c_client *client)
-{
- cpld_client = client;
- return 0;
-}
-
-static int cpld_video_remove(struct i2c_client *client)
-{
- cpld_client = NULL;
- return 0;
-}
-
-static const struct i2c_device_id cpld_video_id[] = {
- { "cpld_video", 0 },
- { }
-};
-
-static struct i2c_driver cpld_video_driver = {
- .driver = {
- .name = "cpld_video",
- },
- .probe_new = cpld_video_probe,
- .remove = cpld_video_remove,
- .id_table = cpld_video_id,
-};
-
-static void evm_init_cpld(void)
-{
- i2c_add_driver(&cpld_video_driver);
-}
-
-static struct i2c_board_info __initdata i2c_info[] = {
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .swnode = &eeprom_node,
- },
- {
- I2C_BOARD_INFO("pcf8574a", 0x38),
- .platform_data = &pcf_data,
- },
- {
- I2C_BOARD_INFO("cpld_reg0", 0x3a),
- },
- {
- I2C_BOARD_INFO("tlv320aic33", 0x18),
- },
- {
- I2C_BOARD_INFO("cpld_video", 0x3b),
- },
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 100 /* kHz */,
- .bus_delay = 0 /* usec */,
-};
-
-#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8 (BIT(9))
-#define VCH2CLK_AUXCLK (BIT(9) | BIT(8))
-#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8 (BIT(13))
-#define VCH3CLK_AUXCLK (BIT(14) | BIT(13))
-
-#define VIDCH2CLK (BIT(10))
-#define VIDCH3CLK (BIT(11))
-#define VIDCH1CLK (BIT(4))
-#define TVP7002_INPUT (BIT(4))
-#define TVP5147_INPUT (~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL (BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL (~BIT(5))
-#define TVP5147_CH0 "tvp514x-0"
-#define TVP5147_CH1 "tvp514x-1"
-
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static int set_vpif_clock(int mux_mode, int hd)
-{
- unsigned long flags;
- unsigned int value;
- int val = 0;
- int err = 0;
-
- if (!cpld_client)
- return -ENXIO;
-
- /* disable the clock */
- spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- value |= (VIDCH3CLK | VIDCH2CLK);
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
- val = i2c_smbus_read_byte(cpld_client);
- if (val < 0)
- return val;
-
- if (mux_mode == 1)
- val &= ~0x40;
- else
- val |= 0x40;
-
- err = i2c_smbus_write_byte(cpld_client, val);
- if (err)
- return err;
-
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
- value &= ~(VCH2CLK_MASK);
- value &= ~(VCH3CLK_MASK);
-
- if (hd >= 1)
- value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
- else
- value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
-
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-
- spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- /* enable the clock */
- value &= ~(VIDCH3CLK | VIDCH2CLK);
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
- return 0;
-}
-
-static struct vpif_subdev_info dm646x_vpif_subdev[] = {
- {
- .name = "adv7343",
- .board_info = {
- I2C_BOARD_INFO("adv7343", 0x2a),
- },
- },
- {
- .name = "ths7303",
- .board_info = {
- I2C_BOARD_INFO("ths7303", 0x2c),
- },
- },
-};
-
-static const struct vpif_output dm6467_ch0_outputs[] = {
- {
- .output = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_STD,
- .std = V4L2_STD_ALL,
- },
- .subdev_name = "adv7343",
- .output_route = ADV7343_COMPOSITE_ID,
- },
- {
- .output = {
- .index = 1,
- .name = "Component",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
- },
- .subdev_name = "adv7343",
- .output_route = ADV7343_COMPONENT_ID,
- },
- {
- .output = {
- .index = 2,
- .name = "S-Video",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_STD,
- .std = V4L2_STD_ALL,
- },
- .subdev_name = "adv7343",
- .output_route = ADV7343_SVIDEO_ID,
- },
-};
-
-static struct vpif_display_config dm646x_vpif_display_config = {
- .set_clock = set_vpif_clock,
- .subdevinfo = dm646x_vpif_subdev,
- .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
- .i2c_adapter_id = 1,
- .chan_config[0] = {
- .outputs = dm6467_ch0_outputs,
- .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
- },
- .card_name = "DM646x EVM Video Display",
-};
-
-/**
- * setup_vpif_input_path()
- * @channel: channel id (0 - CH0, 1 - CH1)
- * @sub_dev_name: ptr sub device name
- *
- * This will set vpif input to capture data from tvp514x or
- * tvp7002.
- */
-static int setup_vpif_input_path(int channel, const char *sub_dev_name)
-{
- int err = 0;
- int val;
-
- /* for channel 1, we don't do anything */
- if (channel != 0)
- return 0;
-
- if (!cpld_client)
- return -ENXIO;
-
- val = i2c_smbus_read_byte(cpld_client);
- if (val < 0)
- return val;
-
- if (!strcmp(sub_dev_name, TVP5147_CH0) ||
- !strcmp(sub_dev_name, TVP5147_CH1))
- val &= TVP5147_INPUT;
- else
- val |= TVP7002_INPUT;
-
- err = i2c_smbus_write_byte(cpld_client, val);
- if (err)
- return err;
- return 0;
-}
-
-/**
- * setup_vpif_input_channel_mode()
- * @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel
- *
- * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
- */
-static int setup_vpif_input_channel_mode(int mux_mode)
-{
- unsigned long flags;
- int err = 0;
- int val;
- u32 value;
-
- if (!cpld_client)
- return -ENXIO;
-
- val = i2c_smbus_read_byte(cpld_client);
- if (val < 0)
- return val;
-
- spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
- if (mux_mode) {
- val &= VPIF_INPUT_TWO_CHANNEL;
- value |= VIDCH1CLK;
- } else {
- val |= VPIF_INPUT_ONE_CHANNEL;
- value &= ~VIDCH1CLK;
- }
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
- spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
- err = i2c_smbus_write_byte(cpld_client, val);
- if (err)
- return err;
-
- return 0;
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_subdev_info vpif_capture_sdev_info[] = {
- {
- .name = TVP5147_CH0,
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
- },
- },
- {
- .name = TVP5147_CH1,
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5c),
- .platform_data = &tvp5146_pdata,
- },
- },
-};
-
-static struct vpif_input dm6467_ch0_inputs[] = {
- {
- .input = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .capabilities = V4L2_IN_CAP_STD,
- .std = TVP514X_STD_ALL,
- },
- .subdev_name = TVP5147_CH0,
- .input_route = INPUT_CVBS_VI2B,
- .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-};
-
-static struct vpif_input dm6467_ch1_inputs[] = {
- {
- .input = {
- .index = 0,
- .name = "S-Video",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .capabilities = V4L2_IN_CAP_STD,
- .std = TVP514X_STD_ALL,
- },
- .subdev_name = TVP5147_CH1,
- .input_route = INPUT_SVIDEO_VI2C_VI1C,
- .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-};
-
-static struct vpif_capture_config dm646x_vpif_capture_cfg = {
- .setup_input_path = setup_vpif_input_path,
- .setup_input_channel_mode = setup_vpif_input_channel_mode,
- .subdev_info = vpif_capture_sdev_info,
- .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
- .i2c_adapter_id = 1,
- .chan_config[0] = {
- .inputs = dm6467_ch0_inputs,
- .input_count = ARRAY_SIZE(dm6467_ch0_inputs),
- .vpif_if = {
- .if_type = VPIF_IF_BT656,
- .hd_pol = 1,
- .vd_pol = 1,
- .fid_pol = 0,
- },
- },
- .chan_config[1] = {
- .inputs = dm6467_ch1_inputs,
- .input_count = ARRAY_SIZE(dm6467_ch1_inputs),
- .vpif_if = {
- .if_type = VPIF_IF_BT656,
- .hd_pol = 1,
- .vd_pol = 1,
- .fid_pol = 0,
- },
- },
- .card_name = "DM646x EVM Video Capture",
-};
-
-static void __init evm_init_video(void)
-{
- spin_lock_init(&vpif_reg_lock);
-
- dm646x_setup_vpif(&dm646x_vpif_display_config,
- &dm646x_vpif_capture_cfg);
-}
-
-static void __init evm_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
- i2c_add_driver(&dm6467evm_cpld_driver);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
- evm_init_cpld();
- evm_init_video();
-}
-#endif
-
-#define DM646X_REF_FREQ 27000000
-#define DM646X_AUX_FREQ 24000000
-#define DM6467T_EVM_REF_FREQ 33000000
-
-static void __init davinci_map_io(void)
-{
- dm646x_init();
-}
-
-static void __init dm646x_evm_init_time(void)
-{
- dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-static void __init dm6467t_evm_init_time(void)
-{
- dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
- * reserved for codecs on the DSP side.
- */
-static const s16 dm646x_dma_rsv_chans[][2] = {
- /* (offset, number) */
- { 0, 4},
- {13, 3},
- {24, 4},
- {30, 2},
- {54, 3},
- {-1, -1}
-};
-
-static const s16 dm646x_dma_rsv_slots[][2] = {
- /* (offset, number) */
- { 0, 4},
- {13, 3},
- {24, 4},
- {30, 2},
- {54, 3},
- {128, 384},
- {-1, -1}
-};
-
-static struct edma_rsv_info dm646x_edma_rsv[] = {
- {
- .rsv_chans = dm646x_dma_rsv_chans,
- .rsv_slots = dm646x_dma_rsv_slots,
- },
-};
-
-static __init void evm_init(void)
-{
- int ret;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- dm646x_register_clocks();
-
- ret = dm646x_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-#ifdef CONFIG_I2C
- nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table);
- nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1);
- evm_init_i2c();
-#endif
-
- davinci_serial_init(dm646x_serial_device);
- dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
- dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
-
- if (machine_is_davinci_dm6467tevm())
- davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
-
- if (platform_device_register(&davinci_aemif_device))
- pr_warn("%s: Cannot register AEMIF device.\n", __func__);
-
- dm646x_init_edma(dm646x_edma_rsv);
-
- if (HAS_ATA)
- davinci_init_ide();
-
- soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
-}
-
-MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
- .atag_offset = 0x100,
- .map_io = davinci_map_io,
- .init_irq = dm646x_init_irq,
- .init_time = dm646x_evm_init_time,
- .init_machine = evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
-
-MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
- .atag_offset = 0x100,
- .map_io = davinci_map_io,
- .init_irq = dm646x_init_irq,
- .init_time = dm6467t_evm_init_time,
- .init_machine = evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
-
+++ /dev/null
-/*
- * Neuros Technologies OSD2 board support
- *
- * Modified from original 644X-EVM board support.
- * 2008 (c) Neuros Technology, LLC.
- * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
- * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
- *
- * The Neuros OSD 2.0 is the hardware component of the Neuros Open
- * Internet Television Platform. Hardware is very close to TI
- * DM644X-EVM board. It has:
- * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
- * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * Additionally realtime clock, IR remote control receiver,
- * IR Blaster based on MSP430 (firmware although is different
- * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
- * with PATA interface, two muxed red-green leds.
- *
- * For more information please refer to
- * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "mux.h"
-#include "davinci.h"
-
-#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
-#define LXT971_PHY_ID 0x001378e2
-#define LXT971_PHY_MASK 0xfffffff0
-
-#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18
-#define NTOSD2_MSP430_I2C_ADDR 0x59
-#define NTOSD2_MSP430_IRQ 2
-
-/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
- * 2048 blocks in the device, 64 pages per block, 2048 bytes per
- * page.
- */
-
-#define NAND_BLOCK_SIZE SZ_128K
-
-static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
- {
- /* UBL (a few copies) plus U-Boot */
- .name = "bootloader",
- .offset = 0,
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- /* U-Boot environment */
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * NAND_BLOCK_SIZE,
- .mask_flags = 0,
- }, {
- /* Kernel */
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- }, {
- /* File System */
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
- /* A few blocks at end hold a flash Bad Block Table. */
-};
-
-static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
- .core_chipsel = 0,
- .parts = davinci_ntosd2_nandflash_partition,
- .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 1,
- .bbt_options = NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_ntosd2_nandflash_resource[] = {
- {
- .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_ntosd2_nandflash_device = {
- .name = "davinci_nand",
- .id = 0,
- .dev = {
- .platform_data = &davinci_ntosd2_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
- .resource = davinci_ntosd2_nandflash_resource,
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
- .name = "davincifb",
- .id = -1,
- .dev = {
- .dma_mask = &davinci_fb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = 0,
-};
-
-static const struct gpio_led ntosd2_leds[] = {
- { .name = "led1_green", .gpio = 10, },
- { .name = "led1_red", .gpio = 11, },
- { .name = "led2_green", .gpio = 12, },
- { .name = "led2_red", .gpio = 13, },
-};
-
-static struct gpio_led_platform_data ntosd2_leds_data = {
- .num_leds = ARRAY_SIZE(ntosd2_leds),
- .leds = ntosd2_leds,
-};
-
-static struct platform_device ntosd2_leds_dev = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ntosd2_leds_data,
- },
-};
-
-
-static struct platform_device *davinci_ntosd2_devices[] __initdata = {
- &davinci_fb_device,
- &ntosd2_leds_dev,
-};
-
-static void __init davinci_ntosd2_map_io(void)
-{
- dm644x_init();
-}
-
-static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
- .wires = 4,
-};
-
-#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-static __init void davinci_ntosd2_init(void)
-{
- int ret;
- struct clk *aemif_clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- dm644x_register_clocks();
-
- dm644x_init_devices();
-
- ret = dm644x_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- aemif_clk = clk_get(NULL, "aemif");
- clk_prepare_enable(aemif_clk);
-
- if (HAS_ATA) {
- if (HAS_NAND)
- pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
- "\tDisable IDE for NAND/NOR support\n");
- davinci_init_ide();
- } else if (HAS_NAND) {
- davinci_cfg_reg(DM644X_HPIEN_DISABLE);
- davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
- /* only one device will be jumpered and detected */
- if (HAS_NAND)
- platform_device_register(
- &davinci_ntosd2_nandflash_device);
- }
-
- platform_add_devices(davinci_ntosd2_devices,
- ARRAY_SIZE(davinci_ntosd2_devices));
-
- davinci_serial_init(dm644x_serial_device);
- dm644x_init_asp();
-
- soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
-
- davinci_setup_usb(1000, 8);
- /*
- * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
- * The AEAWx are five new AEAW pins that can be muxed by separately.
- * They are a bitmask for GPIO management. According TI
- * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
- * gpio(10,11,12,13) for leds any combination of bits works except
- * four last. So we are to reset all five.
- */
- davinci_cfg_reg(DM644X_AEAW0);
- davinci_cfg_reg(DM644X_AEAW1);
- davinci_cfg_reg(DM644X_AEAW2);
- davinci_cfg_reg(DM644X_AEAW3);
- davinci_cfg_reg(DM644X_AEAW4);
-
- davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
-}
-
-MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
- /* Maintainer: Neuros Technologies <neuros@groups.google.com> */
- .atag_offset = 0x100,
- .map_io = davinci_ntosd2_map_io,
- .init_irq = dm644x_init_irq,
- .init_time = dm644x_init_time,
- .init_machine = davinci_ntosd2_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Lyrtech SFFSDR board support.
- *
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- *
- * Based on DV-EVM platform, original copyright follows:
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include "common.h"
-#include "serial.h"
-#include "mux.h"
-#include "davinci.h"
-
-#define SFFSDR_PHY_ID "davinci_mdio-0:01"
-static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
- /* U-Boot Environment: Block 0
- * UBL: Block 1
- * U-Boot: Blocks 6-7 (256 kb)
- * Integrity Kernel: Blocks 8-31 (3 Mb)
- * Integrity Data: Blocks 100-END
- */
- {
- .name = "Linux Kernel",
- .offset = 32 * SZ_128K,
- .size = 16 * SZ_128K, /* 2 Mb */
- .mask_flags = MTD_WRITEABLE, /* Force read-only */
- },
- {
- .name = "Linux ROOT",
- .offset = MTDPART_OFS_APPEND,
- .size = 256 * SZ_128K, /* 32 Mb */
- .mask_flags = 0, /* R/W */
- },
-};
-
-static struct flash_platform_data davinci_sffsdr_nandflash_data = {
- .parts = davinci_sffsdr_nandflash_partition,
- .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
-};
-
-static struct resource davinci_sffsdr_nandflash_resource[] = {
- {
- .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
- .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_sffsdr_nandflash_device = {
- .name = "davinci_nand", /* Name of driver */
- .id = 0,
- .dev = {
- .platform_data = &davinci_sffsdr_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
- .resource = davinci_sffsdr_nandflash_resource,
-};
-
-static const struct property_entry eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static const struct software_node eeprom_node = {
- .properties = eeprom_properties,
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
- {
- I2C_BOARD_INFO("24c64", 0x50),
- .swnode = &eeprom_node,
- },
- /* Other I2C devices:
- * MSP430, addr 0x23 (not used)
- * PCA9543, addr 0x70 (setup done by U-Boot)
- * ADS7828, addr 0x48 (ADC for voltage monitoring.)
- */
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
-};
-
-static void __init sffsdr_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_sffsdr_devices[] __initdata = {
- &davinci_sffsdr_nandflash_device,
-};
-
-static void __init davinci_sffsdr_map_io(void)
-{
- dm644x_init();
-}
-
-static __init void davinci_sffsdr_init(void)
-{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- dm644x_register_clocks();
-
- dm644x_init_devices();
-
- platform_add_devices(davinci_sffsdr_devices,
- ARRAY_SIZE(davinci_sffsdr_devices));
- sffsdr_init_i2c();
- davinci_serial_init(dm644x_serial_device);
- soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
- davinci_setup_usb(0, 0); /* We support only peripheral mode. */
-
- /* mux VLYNQ pins */
- davinci_cfg_reg(DM644X_VLYNQEN);
- davinci_cfg_reg(DM644X_VLYNQWD);
-}
-
-MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
- .atag_offset = 0x100,
- .map_io = davinci_sffsdr_map_io,
- .init_irq = dm644x_init_irq,
- .init_time = dm644x_init_time,
- .init_machine = davinci_sffsdr_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
+++ /dev/null
-/*
- * TI DaVinci DM644x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-/*
- * Device specific clocks
- */
-#define DM644X_REF_FREQ 27000000
-
-#define DM644X_EMAC_BASE 0x01c80000
-#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000)
-#define DM644X_EMAC_CNTRL_OFFSET 0x0000
-#define DM644X_EMAC_CNTRL_MOD_OFFSET 0x1000
-#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000
-#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000
-
-static struct emac_platform_data dm644x_emac_pdata = {
- .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
- .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
- .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
- .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
- .version = EMAC_VERSION_1,
-};
-
-static struct resource dm644x_emac_resources[] = {
- {
- .start = DM644X_EMAC_BASE,
- .end = DM644X_EMAC_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_EMACINT),
- .end = DAVINCI_INTC_IRQ(IRQ_EMACINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm644x_emac_device = {
- .name = "davinci_emac",
- .id = 1,
- .dev = {
- .platform_data = &dm644x_emac_pdata,
- },
- .num_resources = ARRAY_SIZE(dm644x_emac_resources),
- .resource = dm644x_emac_resources,
-};
-
-static struct resource dm644x_mdio_resources[] = {
- {
- .start = DM644X_EMAC_MDIO_BASE,
- .end = DM644X_EMAC_MDIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm644x_mdio_device = {
- .name = "davinci_mdio",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm644x_mdio_resources),
- .resource = dm644x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- * soc description mux mode mode mux dbg
- * reg offset mask mode
- */
-static const struct mux_config dm644x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
-MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
-MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
-
-MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
-
-MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
-MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true)
-MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true)
-MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true)
-MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true)
-MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true)
-
-MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
-
-MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
-
-MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
-
-MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
-MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
-
-MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
-
-MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
-
-MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
-
-MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
-MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
-MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
-
-MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
-
-MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
-
-MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
-MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
-MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
-MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
-
-MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
-
-MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
-MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_VDINT0] = 2,
- [IRQ_VDINT1] = 6,
- [IRQ_VDINT2] = 6,
- [IRQ_HISTINT] = 6,
- [IRQ_H3AINT] = 6,
- [IRQ_PRVUINT] = 6,
- [IRQ_RSZINT] = 6,
- [7] = 7,
- [IRQ_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_VLCDINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_EMACINT] = 4,
- [14] = 7,
- [15] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_PSCIN] = 7,
- [21] = 7,
- [IRQ_IDE] = 4,
- [23] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_SDIOINT] = 7,
- [28] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_VLQINT] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_UARTINT2] = 3,
- [IRQ_SPINT0] = 3,
- [IRQ_SPINT1] = 3,
- [45] = 7,
- [IRQ_DSP2ARM0] = 4,
- [IRQ_DSP2ARM1] = 4,
- [IRQ_GPIO0] = 7,
- [IRQ_GPIO1] = 7,
- [IRQ_GPIO2] = 7,
- [IRQ_GPIO3] = 7,
- [IRQ_GPIO4] = 7,
- [IRQ_GPIO5] = 7,
- [IRQ_GPIO6] = 7,
- [IRQ_GPIO7] = 7,
- [IRQ_GPIOBNK0] = 7,
- [IRQ_GPIOBNK1] = 7,
- [IRQ_GPIOBNK2] = 7,
- [IRQ_GPIOBNK3] = 7,
- [IRQ_GPIOBNK4] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
- /* {event queue no, Priority} */
- {0, 3},
- {1, 7},
- {-1, -1},
-};
-
-static const struct dma_slave_map dm644x_edma_map[] = {
- { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
- { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
- { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
- { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
- { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
- { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-};
-
-static struct edma_soc_info dm644x_edma_pdata = {
- .queue_priority_mapping = queue_priority_mapping,
- .default_queue = EVENTQ_1,
- .slave_map = dm644x_edma_map,
- .slavecnt = ARRAY_SIZE(dm644x_edma_map),
-};
-
-static struct resource edma_resources[] = {
- {
- .name = "edma3_cc",
- .start = 0x01c00000,
- .end = 0x01c00000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc0",
- .start = 0x01c10000,
- .end = 0x01c10000 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc1",
- .start = 0x01c10400,
- .end = 0x01c10400 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_ccint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "edma3_ccerrint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT),
- .flags = IORESOURCE_IRQ,
- },
- /* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm644x_edma_device __initconst = {
- .name = "edma",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
- .res = edma_resources,
- .num_res = ARRAY_SIZE(edma_resources),
- .data = &dm644x_edma_pdata,
- .size_data = sizeof(dm644x_edma_pdata),
-};
-
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource dm644x_asp_resources[] = {
- {
- .name = "mpu",
- .start = DAVINCI_ASP0_BASE,
- .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_DMA_ASP0_TX,
- .end = DAVINCI_DMA_ASP0_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = DAVINCI_DMA_ASP0_RX,
- .end = DAVINCI_DMA_ASP0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device dm644x_asp_device = {
- .name = "davinci-mcbsp",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_asp_resources),
- .resource = dm644x_asp_resources,
-};
-
-#define DM644X_VPSS_BASE 0x01c73400
-
-static struct resource dm644x_vpss_resources[] = {
- {
- /* VPSS Base address */
- .name = "vpss",
- .start = DM644X_VPSS_BASE,
- .end = DM644X_VPSS_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm644x_vpss_device = {
- .name = "vpss",
- .id = -1,
- .dev.platform_data = "dm644x_vpss",
- .num_resources = ARRAY_SIZE(dm644x_vpss_resources),
- .resource = dm644x_vpss_resources,
-};
-
-static struct resource dm644x_vpfe_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm644x_ccdc_resource[] = {
- /* CCDC Base address */
- {
- .start = 0x01c70400,
- .end = 0x01c70400 + 0xff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm644x_ccdc_dev = {
- .name = "dm644x_ccdc",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
- .resource = dm644x_ccdc_resource,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct platform_device dm644x_vpfe_dev = {
- .name = CAPTURE_DRV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_vpfe_resources),
- .resource = dm644x_vpfe_resources,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#define DM644X_OSD_BASE 0x01c72600
-
-static struct resource dm644x_osd_resources[] = {
- {
- .start = DM644X_OSD_BASE,
- .end = DM644X_OSD_BASE + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm644x_osd_dev = {
- .name = DM644X_VPBE_OSD_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_osd_resources),
- .resource = dm644x_osd_resources,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#define DM644X_VENC_BASE 0x01c72400
-
-static struct resource dm644x_venc_resources[] = {
- {
- .start = DM644X_VENC_BASE,
- .end = DM644X_VENC_BASE + 0x17f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-#define DM644X_VPSS_MUXSEL_PLL2_MODE BIT(0)
-#define DM644X_VPSS_MUXSEL_VPBECLK_MODE BIT(1)
-#define DM644X_VPSS_VENCLKEN BIT(3)
-#define DM644X_VPSS_DACCLKEN BIT(4)
-
-static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
- unsigned int pclock)
-{
- int ret = 0;
- u32 v = DM644X_VPSS_VENCLKEN;
-
- switch (type) {
- case VPBE_ENC_STD:
- v |= DM644X_VPSS_DACCLKEN;
- writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
- break;
- case VPBE_ENC_DV_TIMINGS:
- if (pclock <= 27000000) {
- v |= DM644X_VPSS_DACCLKEN;
- writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
- } else {
- /*
- * For HD, use external clock source since
- * HD requires higher clock rate
- */
- v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
- writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
- }
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static struct resource dm644x_v4l2_disp_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm644x_vpbe_display = {
- .name = "vpbe-v4l2",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_v4l2_disp_resources),
- .resource = dm644x_v4l2_disp_resources,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct venc_platform_data dm644x_venc_pdata = {
- .setup_clock = dm644x_venc_setup_clock,
-};
-
-static struct platform_device dm644x_venc_dev = {
- .name = DM644X_VPBE_VENC_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm644x_venc_resources),
- .resource = dm644x_venc_resources,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dm644x_venc_pdata,
- },
-};
-
-static struct platform_device dm644x_vpbe_dev = {
- .name = "vpbe_controller",
- .id = -1,
- .dev = {
- .dma_mask = &dm644x_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dm644_gpio_resources[] = {
- { /* registers */
- .start = DAVINCI_GPIO_BASE,
- .end = DAVINCI_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- { /* interrupt */
- .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
- .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
- .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
- .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
- .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
- .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
- .no_auto_base = true,
- .base = 0,
- .ngpio = 71,
-};
-
-int __init dm644x_gpio_register(void)
-{
- return davinci_gpio_register(dm644_gpio_resources,
- ARRAY_SIZE(dm644_gpio_resources),
- &dm644_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm644x_io_desc[] = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm644x_ids[] = {
- {
- .variant = 0x0,
- .part_no = 0xb700,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM6446,
- .name = "dm6446",
- },
- {
- .variant = 0x1,
- .part_no = 0xb700,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM6446,
- .name = "dm6446a",
- },
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm644x_timer_cfg = {
- .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
- .irq = {
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
- },
-};
-
-static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT2),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-
-struct platform_device dm644x_serial_device[] = {
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm644x_serial0_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = dm644x_serial1_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = dm644x_serial2_platform_data,
- }
- },
- {
- }
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm644x = {
- .io_desc = dm644x_io_desc,
- .io_desc_num = ARRAY_SIZE(dm644x_io_desc),
- .jtag_id_reg = 0x01c40028,
- .ids = dm644x_ids,
- .ids_num = ARRAY_SIZE(dm644x_ids),
- .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
- .pinmux_pins = dm644x_pins,
- .pinmux_pins_num = ARRAY_SIZE(dm644x_pins),
- .emac_pdata = &dm644x_emac_pdata,
- .sram_dma = 0x00008000,
- .sram_len = SZ_16K,
-};
-
-void __init dm644x_init_asp(void)
-{
- davinci_cfg_reg(DM644X_MCBSP);
- platform_device_register(&dm644x_asp_device);
-}
-
-void __init dm644x_init(void)
-{
- davinci_common_init(&davinci_soc_info_dm644x);
- davinci_map_sysmod();
-}
-
-void __init dm644x_init_time(void)
-{
- void __iomem *pll1, *psc;
- struct clk *clk;
- int rv;
-
- clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ);
-
- pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
- dm644x_pll1_init(NULL, pll1, NULL);
-
- psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
- dm644x_psc_init(NULL, psc);
-
- clk = clk_get(NULL, "timer0");
- if (WARN_ON(IS_ERR(clk))) {
- pr_err("Unable to get the timer clock\n");
- return;
- }
-
- rv = davinci_timer_register(clk, &dm644x_timer_cfg);
- WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm644x_pll2_resources[] = {
- {
- .start = DAVINCI_PLL2_BASE,
- .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm644x_pll2_device = {
- .name = "dm644x-pll2",
- .id = -1,
- .resource = dm644x_pll2_resources,
- .num_resources = ARRAY_SIZE(dm644x_pll2_resources),
-};
-
-void __init dm644x_register_clocks(void)
-{
- /* PLL1 and PSC are registered in dm644x_init_time() */
- platform_device_register(&dm644x_pll2_device);
-}
-
-int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
- struct vpbe_config *vpbe_cfg)
-{
- if (vpfe_cfg || vpbe_cfg)
- platform_device_register(&dm644x_vpss_device);
-
- if (vpfe_cfg) {
- dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
- platform_device_register(&dm644x_ccdc_dev);
- platform_device_register(&dm644x_vpfe_dev);
- }
-
- if (vpbe_cfg) {
- dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
- platform_device_register(&dm644x_osd_dev);
- platform_device_register(&dm644x_venc_dev);
- platform_device_register(&dm644x_vpbe_dev);
- platform_device_register(&dm644x_vpbe_display);
- }
-
- return 0;
-}
-
-static const struct davinci_aintc_config dm644x_aintc_config = {
- .reg = {
- .start = DAVINCI_ARM_INTC_BASE,
- .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .num_irqs = 64,
- .prios = dm644x_default_priorities,
-};
-
-void __init dm644x_init_irq(void)
-{
- davinci_aintc_init(&dm644x_aintc_config);
-}
-
-void __init dm644x_init_devices(void)
-{
- struct platform_device *edma_pdev;
- int ret;
-
- edma_pdev = platform_device_register_full(&dm644x_edma_device);
- if (IS_ERR(edma_pdev))
- pr_warn("%s: Failed to register eDMA\n", __func__);
-
- platform_device_register(&dm644x_mdio_device);
- platform_device_register(&dm644x_emac_device);
-
- ret = davinci_init_wdt();
- if (ret)
- pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-}
+++ /dev/null
-/*
- * TI DaVinci DM646x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DAVINCI_VPIF_BASE (0x01C12000)
-
-#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
- BIT_MASK(0))
-#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
- BIT_MASK(8))
-
-#define DM646X_EMAC_BASE 0x01c80000
-#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
-#define DM646X_EMAC_CNTRL_OFFSET 0x0000
-#define DM646X_EMAC_CNTRL_MOD_OFFSET 0x1000
-#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
-#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
-
-static struct emac_platform_data dm646x_emac_pdata = {
- .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
- .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
- .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
- .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
- .version = EMAC_VERSION_2,
-};
-
-static struct resource dm646x_emac_resources[] = {
- {
- .start = DM646X_EMAC_BASE,
- .end = DM646X_EMAC_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm646x_emac_device = {
- .name = "davinci_emac",
- .id = 1,
- .dev = {
- .platform_data = &dm646x_emac_pdata,
- },
- .num_resources = ARRAY_SIZE(dm646x_emac_resources),
- .resource = dm646x_emac_resources,
-};
-
-static struct resource dm646x_mdio_resources[] = {
- {
- .start = DM646X_EMAC_MDIO_BASE,
- .end = DM646X_EMAC_MDIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm646x_mdio_device = {
- .name = "davinci_mdio",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm646x_mdio_resources),
- .resource = dm646x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- * soc description mux mode mode mux dbg
- * reg offset mask mode
- */
-static const struct mux_config dm646x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN, 0, 0, 5, 1, true)
-
-MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false)
-
-MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false)
-
-MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true)
-
-MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true)
-
-MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true)
-
-MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true)
-
-MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true)
-
-MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true)
-
-MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true)
-
-MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true)
-
-MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true)
-
-MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true)
-
-MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true)
-#endif
-};
-
-static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM646X_VP_VERTINT0] = 7,
- [IRQ_DM646X_VP_VERTINT1] = 7,
- [IRQ_DM646X_VP_VERTINT2] = 7,
- [IRQ_DM646X_VP_VERTINT3] = 7,
- [IRQ_DM646X_VP_ERRINT] = 7,
- [IRQ_DM646X_RESERVED_1] = 7,
- [IRQ_DM646X_RESERVED_2] = 7,
- [IRQ_DM646X_WDINT] = 7,
- [IRQ_DM646X_CRGENINT0] = 7,
- [IRQ_DM646X_CRGENINT1] = 7,
- [IRQ_DM646X_TSIFINT0] = 7,
- [IRQ_DM646X_TSIFINT1] = 7,
- [IRQ_DM646X_VDCEINT] = 7,
- [IRQ_DM646X_USBINT] = 7,
- [IRQ_DM646X_USBDMAINT] = 7,
- [IRQ_DM646X_PCIINT] = 7,
- [IRQ_CCINT0] = 7, /* dma */
- [IRQ_CCERRINT] = 7, /* dma */
- [IRQ_TCERRINT0] = 7, /* dma */
- [IRQ_TCERRINT] = 7, /* dma */
- [IRQ_DM646X_TCERRINT2] = 7,
- [IRQ_DM646X_TCERRINT3] = 7,
- [IRQ_DM646X_IDE] = 7,
- [IRQ_DM646X_HPIINT] = 7,
- [IRQ_DM646X_EMACRXTHINT] = 7,
- [IRQ_DM646X_EMACRXINT] = 7,
- [IRQ_DM646X_EMACTXINT] = 7,
- [IRQ_DM646X_EMACMISCINT] = 7,
- [IRQ_DM646X_MCASP0TXINT] = 7,
- [IRQ_DM646X_MCASP0RXINT] = 7,
- [IRQ_DM646X_RESERVED_3] = 7,
- [IRQ_DM646X_MCASP1TXINT] = 7,
- [IRQ_TINT0_TINT12] = 7, /* clockevent */
- [IRQ_TINT0_TINT34] = 7, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_DM646X_VLQINT] = 7,
- [IRQ_I2C] = 7,
- [IRQ_UARTINT0] = 7,
- [IRQ_UARTINT1] = 7,
- [IRQ_DM646X_UARTINT2] = 7,
- [IRQ_DM646X_SPINT0] = 7,
- [IRQ_DM646X_SPINT1] = 7,
- [IRQ_DM646X_DSP2ARMINT] = 7,
- [IRQ_DM646X_RESERVED_4] = 7,
- [IRQ_DM646X_PSCINT] = 7,
- [IRQ_DM646X_GPIO0] = 7,
- [IRQ_DM646X_GPIO1] = 7,
- [IRQ_DM646X_GPIO2] = 7,
- [IRQ_DM646X_GPIO3] = 7,
- [IRQ_DM646X_GPIO4] = 7,
- [IRQ_DM646X_GPIO5] = 7,
- [IRQ_DM646X_GPIO6] = 7,
- [IRQ_DM646X_GPIO7] = 7,
- [IRQ_DM646X_GPIOBNK0] = 7,
- [IRQ_DM646X_GPIOBNK1] = 7,
- [IRQ_DM646X_GPIOBNK2] = 7,
- [IRQ_DM646X_DDRINT] = 7,
- [IRQ_DM646X_AEMIFINT] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Four Transfer Controllers on DM646x */
-static s8 dm646x_queue_priority_mapping[][2] = {
- /* {event queue no, Priority} */
- {0, 4},
- {1, 0},
- {2, 5},
- {3, 1},
- {-1, -1},
-};
-
-static const struct dma_slave_map dm646x_edma_map[] = {
- { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
- { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
- { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
- { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
- { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
-};
-
-static struct edma_soc_info dm646x_edma_pdata = {
- .queue_priority_mapping = dm646x_queue_priority_mapping,
- .default_queue = EVENTQ_1,
- .slave_map = dm646x_edma_map,
- .slavecnt = ARRAY_SIZE(dm646x_edma_map),
-};
-
-static struct resource edma_resources[] = {
- {
- .name = "edma3_cc",
- .start = 0x01c00000,
- .end = 0x01c00000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc0",
- .start = 0x01c10000,
- .end = 0x01c10000 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc1",
- .start = 0x01c10400,
- .end = 0x01c10400 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc2",
- .start = 0x01c10800,
- .end = 0x01c10800 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc3",
- .start = 0x01c10c00,
- .end = 0x01c10c00 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_ccint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "edma3_ccerrint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT),
- .flags = IORESOURCE_IRQ,
- },
- /* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm646x_edma_device __initconst = {
- .name = "edma",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
- .res = edma_resources,
- .num_res = ARRAY_SIZE(edma_resources),
- .data = &dm646x_edma_pdata,
- .size_data = sizeof(dm646x_edma_pdata),
-};
-
-static struct resource dm646x_mcasp0_resources[] = {
- {
- .name = "mpu",
- .start = DAVINCI_DM646X_MCASP0_REG_BASE,
- .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
- .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
- .flags = IORESOURCE_DMA,
- },
- {
- .name = "rx",
- .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
- .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
- .flags = IORESOURCE_DMA,
- },
- {
- .name = "tx",
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0TXINT),
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0RXINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DIT mode only, rx is not supported */
-static struct resource dm646x_mcasp1_resources[] = {
- {
- .name = "mpu",
- .start = DAVINCI_DM646X_MCASP1_REG_BASE,
- .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
- .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
- .flags = IORESOURCE_DMA,
- },
- {
- .name = "tx",
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP1TXINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm646x_mcasp0_device = {
- .name = "davinci-mcasp",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm646x_mcasp0_resources),
- .resource = dm646x_mcasp0_resources,
-};
-
-static struct platform_device dm646x_mcasp1_device = {
- .name = "davinci-mcasp",
- .id = 1,
- .num_resources = ARRAY_SIZE(dm646x_mcasp1_resources),
- .resource = dm646x_mcasp1_resources,
-};
-
-static struct platform_device dm646x_dit_device = {
- .name = "spdif-dit",
- .id = -1,
-};
-
-static u64 vpif_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource vpif_resource[] = {
- {
- .start = DAVINCI_VPIF_BASE,
- .end = DAVINCI_VPIF_BASE + 0x03ff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device vpif_dev = {
- .name = "vpif",
- .id = -1,
- .dev = {
- .dma_mask = &vpif_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = vpif_resource,
- .num_resources = ARRAY_SIZE(vpif_resource),
-};
-
-static struct resource vpif_display_resource[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vpif_display_dev = {
- .name = "vpif_display",
- .id = -1,
- .dev = {
- .dma_mask = &vpif_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = vpif_display_resource,
- .num_resources = ARRAY_SIZE(vpif_display_resource),
-};
-
-static struct resource vpif_capture_resource[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vpif_capture_dev = {
- .name = "vpif_capture",
- .id = -1,
- .dev = {
- .dma_mask = &vpif_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = vpif_capture_resource,
- .num_resources = ARRAY_SIZE(vpif_capture_resource),
-};
-
-static struct resource dm646x_gpio_resources[] = {
- { /* registers */
- .start = DAVINCI_GPIO_BASE,
- .end = DAVINCI_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- { /* interrupt */
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
- .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
- .no_auto_base = true,
- .base = 0,
- .ngpio = 43,
-};
-
-int __init dm646x_gpio_register(void)
-{
- return davinci_gpio_register(dm646x_gpio_resources,
- ARRAY_SIZE(dm646x_gpio_resources),
- &dm646x_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm646x_io_desc[] = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm646x_ids[] = {
- {
- .variant = 0x0,
- .part_no = 0xb770,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM6467,
- .name = "dm6467_rev1.x",
- },
- {
- .variant = 0x1,
- .part_no = 0xb770,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM6467,
- .name = "dm6467_rev3.x",
- },
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm646x_timer_cfg = {
- .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
- .irq = {
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
- },
-};
-
-static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_DM646X_UARTINT2),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-
-struct platform_device dm646x_serial_device[] = {
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm646x_serial0_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = dm646x_serial1_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = dm646x_serial2_platform_data,
- }
- },
- {
- }
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm646x = {
- .io_desc = dm646x_io_desc,
- .io_desc_num = ARRAY_SIZE(dm646x_io_desc),
- .jtag_id_reg = 0x01c40028,
- .ids = dm646x_ids,
- .ids_num = ARRAY_SIZE(dm646x_ids),
- .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
- .pinmux_pins = dm646x_pins,
- .pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
- .emac_pdata = &dm646x_emac_pdata,
- .sram_dma = 0x10010000,
- .sram_len = SZ_32K,
-};
-
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
-{
- dm646x_mcasp0_device.dev.platform_data = pdata;
- platform_device_register(&dm646x_mcasp0_device);
-}
-
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
-{
- dm646x_mcasp1_device.dev.platform_data = pdata;
- platform_device_register(&dm646x_mcasp1_device);
- platform_device_register(&dm646x_dit_device);
-}
-
-void dm646x_setup_vpif(struct vpif_display_config *display_config,
- struct vpif_capture_config *capture_config)
-{
- unsigned int value;
-
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- value &= ~VSCLKDIS_MASK;
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-
- value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
- value &= ~VDD3P3V_VID_MASK;
- __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-
- davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
- davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
- davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
- davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
-
- vpif_display_dev.dev.platform_data = display_config;
- vpif_capture_dev.dev.platform_data = capture_config;
- platform_device_register(&vpif_dev);
- platform_device_register(&vpif_display_dev);
- platform_device_register(&vpif_capture_dev);
-}
-
-int __init dm646x_init_edma(struct edma_rsv_info *rsv)
-{
- struct platform_device *edma_pdev;
-
- dm646x_edma_pdata.rsv = rsv;
-
- edma_pdev = platform_device_register_full(&dm646x_edma_device);
- return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-void __init dm646x_init(void)
-{
- davinci_common_init(&davinci_soc_info_dm646x);
- davinci_map_sysmod();
-}
-
-void __init dm646x_init_time(unsigned long ref_clk_rate,
- unsigned long aux_clkin_rate)
-{
- void __iomem *pll1, *psc;
- struct clk *clk;
- int rv;
-
- clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
- clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
-
- pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
- dm646x_pll1_init(NULL, pll1, NULL);
-
- psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
- dm646x_psc_init(NULL, psc);
-
- clk = clk_get(NULL, "timer0");
- if (WARN_ON(IS_ERR(clk))) {
- pr_err("Unable to get the timer clock\n");
- return;
- }
-
- rv = davinci_timer_register(clk, &dm646x_timer_cfg);
- WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm646x_pll2_resources[] = {
- {
- .start = DAVINCI_PLL2_BASE,
- .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm646x_pll2_device = {
- .name = "dm646x-pll2",
- .id = -1,
- .resource = dm646x_pll2_resources,
- .num_resources = ARRAY_SIZE(dm646x_pll2_resources),
-};
-
-void __init dm646x_register_clocks(void)
-{
- /* PLL1 and PSC are registered in dm646x_init_time() */
- platform_device_register(&dm646x_pll2_device);
-}
-
-static const struct davinci_aintc_config dm646x_aintc_config = {
- .reg = {
- .start = DAVINCI_ARM_INTC_BASE,
- .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .num_irqs = 64,
- .prios = dm646x_default_priorities,
-};
-
-void __init dm646x_init_irq(void)
-{
- davinci_aintc_init(&dm646x_aintc_config);
-}
-
-static int __init dm646x_init_devices(void)
-{
- int ret = 0;
-
- if (!cpu_is_davinci_dm646x())
- return 0;
-
- platform_device_register(&dm646x_mdio_device);
- platform_device_register(&dm646x_emac_device);
-
- ret = davinci_init_wdt();
- if (ret)
- pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
- return ret;
-}
-postcore_initcall(dm646x_init_devices);
# SPDX-License-Identifier: GPL-2.0
menuconfig ARCH_DOVE
bool "Marvell Dove" if ARCH_MULTI_V7
+ depends on ATAGS
select CPU_PJ4
select GPIOLIB
select MVEBU_MBUS
select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select PM_GENERIC_DOMAINS if PM
+ select PCI_QUIRKS if PCI
help
Support for the Marvell Dove SoC 88AP510
.write = pcie_wr_conf,
};
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
static void rc_pci_fixup(struct pci_dev *dev)
{
- /*
- * Prevent enumeration of root complex.
- */
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_EP93XX
bool "EP93xx-based"
+ depends on ATAGS
depends on ARCH_MULTI_V4T
depends on CPU_LITTLE_ENDIAN
select ARCH_SPARSEMEM_ENABLE
config MACH_ADSSPHERE
bool "Support ADS Sphere"
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
config MACH_MICRO9H
bool "Support Contec Micro9-High"
select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-High board.
config MACH_MICRO9M
bool "Support Contec Micro9-Mid"
select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-Mid board.
config MACH_MICRO9L
bool "Support Contec Micro9-Lite"
select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-Lite board.
config MACH_MICRO9S
bool "Support Contec Micro9-Slim"
select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
config MACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Bluewater
Systems Snapper CL15 Module.
config ARCH_CATS
bool "CATS"
+ depends on UNUSED_BOARD_FILES
select CLKEVT_I8253
select CLKSRC_I8253
select FOOTBRIDGE_HOST
select HAVE_ARM_ARCH_TIMER
select MCPM if SMP
select MCPM_QUAD_CLUSTER if SMP
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
help
Support for Hisilicon HiP04 SoC family
select HAVE_IMX_SRC
select MXC_TZIC
-config SOC_IMX50
+config SOC_IMX50
bool "i.MX50 support"
select PINCTRL_IMX50
select SOC_IMX5
help
This enables support for Freescale i.MX51 processor
-config SOC_IMX53
+config SOC_IMX53
bool "i.MX53 support"
select PINCTRL_IMX53
select SOC_IMX5
select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
select ARM_ERRATA_814220 if ARCH_MULTI_V7
help
- This enables support for Freescale i.MX7 Dual processor.
+ This enables support for Freescale i.MX7 Dual processor.
config SOC_IMX7ULP
bool "i.MX7ULP support"
return IMX_CHIP_REVISION_1_0;
case 0x01:
return IMX_CHIP_REVISION_1_1;
+ case 0x02:
+ return IMX_CHIP_REVISION_1_2;
default:
return IMX_CHIP_REVISION_UNKNOWN;
}
bool "IOP32x-based platforms"
depends on ARCH_MULTI_V5
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_XSCALE
select GPIO_IOP
select GPIOLIB
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
config MACH_ZYLONITE2
bool "Marvell's PXA168 Zylonite2 Development Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
config MACH_AVENGERS_LITE
bool "Marvell's PXA168 Avengers Lite Development Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
config MACH_TTC_DKB
bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
config MACH_BROWNSTONE
bool "Marvell's Brownstone Development Platform"
depends on ARCH_MULTI_V7
+ depends on UNUSED_BOARD_FILES
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
config MACH_FLINT
bool "Marvell's Flint Development Platform"
depends on ARCH_MULTI_V7
+ depends on UNUSED_BOARD_FILES
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
depends on ARCH_MULTI_V7
+ depends on UNUSED_BOARD_FILES
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
depends on ARCH_MULTI_V5
+ depends on UNUSED_BOARD_FILES
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
#include <linux/platform_data/pxa_sdhci.h>
extern void mmp2_timer_init(void);
-extern void __init mmp2_init_icu(void);
extern void __init mmp2_init_irq(void);
extern void mmp2_clear_pmic_int(void);
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/dma-mmp_tdma.h>
+#include <linux/irqchip/mmp.h>
#include "devices.h"
#include <linux/reboot.h>
extern void pxa168_timer_init(void);
-extern void __init icu_init_irq(void);
extern void __init pxa168_init_irq(void);
extern void pxa168_restart(enum reboot_mode, const char *);
extern void pxa168_clear_keypad_wakeup(void);
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/soc/mmp/cputype.h>
+#include <linux/irqchip/mmp.h>
#include "devices.h"
#define __ASM_MACH_PXA910_H
extern void pxa910_timer_init(void);
-extern void __init icu_init_irq(void);
extern void __init pxa910_init_irq(void);
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/mmp_disp.h>
+#include <linux/irqchip/mmp.h>
#include "devices.h"
bool "Marvell MV78xx0"
depends on ARCH_MULTI_V5
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
.write = pcie_wr_conf,
};
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
static void rc_pci_fixup(struct pci_dev *dev)
{
- /*
- * Prevent enumeration of root complex.
- */
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
bool "TI OMAP1"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select CLKSRC_MMIO
config MACH_OMAP_INNOVATOR
bool "TI Innovator"
depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+ depends on UNUSED_BOARD_FILES
help
TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
have such a board.
config MACH_OMAP_H2
bool "TI H2 Support"
depends on ARCH_OMAP16XX
+ depends on UNUSED_BOARD_FILES
help
TI OMAP 1610/1611B H2 board support. Say Y here if you have such
a board.
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP16XX
+ depends on UNUSED_BOARD_FILES
help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
config MACH_HERALD
bool "HTC Herald"
depends on ARCH_OMAP850
+ depends on UNUSED_BOARD_FILES
help
HTC Herald smartphone support (AKA T-Mobile Wing, ...)
config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
depends on MACH_OMAP_OSK
+ depends on UNUSED_BOARD_FILES
help
The OSK supports an optional add-on board with a Quarter-VGA
touchscreen, PDA-ish buttons, a resume button, bicolor LED,
config MACH_OMAP_PERSEUS2
bool "TI Perseus2"
depends on ARCH_OMAP730
+ depends on UNUSED_BOARD_FILES
help
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
config MACH_OMAP_FSAMPLE
bool "TI F-Sample"
depends on ARCH_OMAP730
+ depends on UNUSED_BOARD_FILES
help
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
config MACH_OMAP_PALMZ71
bool "Palm Zire71"
depends on ARCH_OMAP15XX
+ depends on UNUSED_BOARD_FILES
help
Support for the Palm Zire71 PDA. To boot the kernel,
you'll need a PalmOS compatible bootloader; check out
config MACH_OMAP_PALMTT
bool "Palm Tungsten|T"
depends on ARCH_OMAP15XX
+ depends on UNUSED_BOARD_FILES
help
Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
need a PalmOS compatible bootloader (Garux); check out
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+ depends on UNUSED_BOARD_FILES
help
Support for generic OMAP-1510, 1610 or 1710 board with
no FPGA. Can be used as template for porting Linux to
select MACH_OMAP_GENERIC
select MEMORY
select MFD_SYSCON
+ select OMAP_DM_SYSTIMER
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
config OMAP_INTERCONNECT_BARRIER
bool
select ARM_HEAVY_MB
-
+
config ARCH_OMAP
bool
bool "OMAP2420 support"
depends on ARCH_OMAP2
default y
+ select OMAP_DM_SYSTIMER
select OMAP_DM_TIMER
select SOC_HAS_OMAP2_SDRC
default y if MACH_NOKIA_N8X0
config MACH_NOKIA_N810
- bool
+ bool
config MACH_NOKIA_N810_WIMAX
- bool
+ bool
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
node = of_find_node_by_name(NULL, "omap4_padconf_global");
if (node)
omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+ of_node_put(node);
return 0;
}
if (!pdev) {
pr_err("Unable to find DSS platform device\n");
+ of_node_put(node);
return -ENODEV;
}
r = of_platform_populate(node, NULL, NULL, &pdev->dev);
put_device(&pdev->dev);
+ of_node_put(node);
if (r) {
pr_err("Unable to populate DSS submodule devices\n");
return r;
of_platform_populate(np, omap_dt_match_table,
omap_auxdata_lookup, NULL);
+
+ of_node_put(np);
}
}
}
irq_num = of_irq_get(np, 0);
+ of_node_put(np);
if (irq_num == -EPROBE_DEFER)
return irq_num;
select GPIOLIB
select MVEBU_MBUS
select FORCE_PCI
+ select PCI_QUIRKS
select PHYLIB if NETDEVICES
select PLAT_ORION_LEGACY
help
config MACH_DB88F5281
bool "Marvell Orion-2 Development Board"
select I2C_BOARDINFO if I2C
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-2 (88F5281) Development Board
config MACH_RD88F5182
bool "Marvell Orion-NAS Reference Design"
select I2C_BOARDINFO if I2C
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-NAS (88F5182) RD2
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO if I2C
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
KuroBox Pro platform.
config MACH_DNS323
bool "D-Link DNS-323"
select I2C_BOARDINFO if I2C
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
D-Link DNS-323 platform.
config MACH_TS209
bool "QNAP TS-109/TS-209"
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
config MACH_TERASTATION_PRO2
bool "Buffalo Terastation Pro II/Live"
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
Buffalo Terastation Pro II/Live platform.
config MACH_LINKSTATION_PRO
bool "Buffalo Linkstation Pro/Live"
+ depends on ATAGS
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
config MACH_LINKSTATION_LS_HGL
bool "Buffalo Linkstation LS-HGL"
+ depends on ATAGS && UNUSED_BOARD_FILES
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
config MACH_TS409
bool "QNAP TS-409"
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-409 platform.
config MACH_WRT350N_V2
bool "Linksys WRT350N v2"
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Linksys WRT350N v2 platform.
config MACH_TS78XX
bool "Technologic Systems TS-78xx"
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-78xx platform.
config MACH_MV2120
bool "HP Media Vault mv2120"
+ depends on ATAGS
help
Say 'Y' here if you want your kernel to support the
HP Media Vault mv2120 or mv5100.
config MACH_NET2BIG
bool "LaCie 2Big Network"
+ depends on ATAGS
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
config MACH_WNR854T
bool "Netgear WNR854T"
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Netgear WNR854T platform.
config MACH_RD88F5181L_GE
bool "Marvell Orion-VoIP GE Reference Design"
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-VoIP GE (88F5181L) RD.
config MACH_RD88F5181L_FXO
bool "Marvell Orion-VoIP FXO Reference Design"
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-VoIP FXO (88F5181L) RD.
config MACH_RD88F6183AP_GE
bool "Marvell Orion-1-90 AP GE Reference Design"
+ depends on ATAGS && UNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-1-90 (88F6183) AP GE RD.
/*****************************************************************************
* General PCIe + PCI
****************************************************************************/
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
static void rc_pci_fixup(struct pci_dev *dev)
{
- /*
- * Prevent enumeration of root complex.
- */
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
the device tree. Needn't select any other machine while
MACH_PXA3XX_DT is enabled.
+if ATAGS
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+ depends on UNUSED_BOARD_FILES
select GPIO_REG
select PXA25x
select SA1111
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ depends on UNUSED_BOARD_FILES
select GPIO_REG
select PXA27x
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA320
select MACH_ZYLONITE
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA930
select CPU_PXA935
select PXA3xx
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA930
select CPU_PXA935
select PXA3xx
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
+ depends on UNUSED_BOARD_FILES
select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
+ depends on UNUSED_BOARD_FILES
select ARCOM_PCMCIA
select I2C_GPIO if I2C=y
select ISA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
+ depends on UNUSED_BOARD_FILES
select ARCOM_PCMCIA
select ISA
select PXA27x
config MACH_BALLOON3
bool "Balloon 3 board"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
help
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
+ depends on UNUSED_BOARD_FILES
depends on MACH_CSB726
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA320
select PXA3xx
config MACH_XCEP
bool "Iskratel Electronics XCEP"
+ depends on UNUSED_BOARD_FILES
select MTD
select MTD_CFI
select MTD_CFI_INTELEXT
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+ depends on UNUSED_BOARD_FILES
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
+ depends on UNUSED_BOARD_FILES
select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
+ depends on UNUSED_BOARD_FILES
depends on MACH_PCM027
choice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
+ depends on UNUSED_BOARD_FILES
select PXA27x
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
+ depends on UNUSED_BOARD_FILES
depends on MACH_COLIBRI
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA320
select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
+ depends on UNUSED_BOARD_FILES
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
config MACH_VPAC270
bool "Voipac PXA270"
+ depends on UNUSED_BOARD_FILES
select HAVE_PATA_PLATFORM
select PXA27x
help
config MACH_H4700
bool "HP iPAQ hx4700"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
+ depends on UNUSED_BOARD_FILES
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA26x
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
help
config PXA_EZX
bool "Motorola EZX Platform"
+ depends on UNUSED_BOARD_FILES
select IWMMXT
select PXA27x
config MACH_MP900C
bool "Nec Mobilepro 900/c"
+ depends on UNUSED_BOARD_FILES
select PXA25x
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
+ depends on UNUSED_BOARD_FILES
config MACH_PALM27X
bool
config MACH_PALMTE2
bool "Palm Tungsten|E2"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select PXA25x
config MACH_PALMT5
bool "Palm Tungsten|T5"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_PALMTX
bool "Palm T|X"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_PALMZ72
bool "Palm Zire 72"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_PALMLD
bool "Palm LifeDrive"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_TREO680
bool "Palm Treo 680"
+ depends on UNUSED_BOARD_FILES
default y
depends on ARCH_PXA_PALM
select IWMMXT
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
+ depends on UNUSED_BOARD_FILES
select PXA25x
select SHARP_LOCOMO
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
+ depends on UNUSED_BOARD_FILES
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
+ depends on UNUSED_BOARD_FILES
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
+ depends on UNUSED_BOARD_FILES
select PXA25x
select PXA_SHARP_C7xx
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends on UNUSED_BOARD_FILES
depends on PXA_SHARPSL
select PXA25x
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+ depends on UNUSED_BOARD_FILES
select CPU_PXA320
select PXA3xx
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
+ depends on UNUSED_BOARD_FILES
select FB_W100
select FB
select PXA25x
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
+ depends on UNUSED_BOARD_FILES
select PXA27x
+
+endif # ATAGS
endmenu
config PXA25x
};
static struct gpiod_lookup_table corgi_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.1",
+ .dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
};
static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
- .dev_id = "pxa2xx-spi.3",
+ .dev_id = "spi3",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
- .dev_id = "pxa2xx-spi.4",
+ .dev_id = "spi4",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table littleton_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
};
static struct gpiod_lookup_table magician_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table spitz_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
- .dev_id = "pxa2xx-spi.1",
+ .dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
bool "Enable support for MSM8X60"
select CLKSRC_QCOM
+config ARCH_MSM8909
+ bool "Enable support for MSM8909"
+ select HAVE_ARM_ARCH_TIMER
+
config ARCH_MSM8916
bool "Enable support for MSM8916"
select HAVE_ARM_ARCH_TIMER
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops);
+CPU_METHOD_OF_DECLARE(qcom_smp_msm8909, "qcom,msm8909-smp", &qcom_smp_cortex_a7_ops);
CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops);
static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
def_bool n
depends on ATAGS
help
- This option enables ATAGS based boot support code for
- Samsung platforms, including static platform devices, legacy
- clock, timer and interrupt initialization, etc.
+ This option enables ATAGS based boot support code for
+ Samsung platforms, including static platform devices, legacy
+ clock, timer and interrupt initialization, etc.
- Platforms that support only DT based boot need not to select
- this option.
+ Platforms that support only DT based boot need not to select
+ this option.
if SAMSUNG_ATAGS
config S3C_DEV_HWMON
bool
help
- Compile in platform device definitions for HWMON
+ Compile in platform device definitions for HWMON
config S3C_DEV_I2C1
bool
config SAMSUNG_DEV_TS
bool
help
- Common in platform device definitions for touchscreen device
+ Common in platform device definitions for touchscreen device
config SAMSUNG_DEV_KEYPAD
bool
bool "Samsung S3C24XX SoCs (deprecated, see help)"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
depends on CPU_LITTLE_ENDIAN
- select ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CLKSRC_SAMSUNG_PWM
select GPIO_SAMSUNG
select GPIOLIB
help
Base platform code for any Samsung S3C24XX device
-
-
menu "Samsung S3C24XX SoCs Support"
comment "S3C24XX SoCs"
help
Say Y here if you are using the Thorcom VR1000 board.
-endif # CPU_S3C2410
+endif # CPU_S3C2410
config S3C2412_PM_SLEEP
bool
help
Say Y here if you are using an VSTMS board
-endif # CPU_S3C2412
+endif # CPU_S3C2412
if CPU_S3C2416
Note: This is under development and not all peripherals can be supported
with this machine file.
-endif # CPU_S3C2416
+endif # CPU_S3C2416
if CPU_S3C2440 || CPU_S3C2442
default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442
if CPU_S3C2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
-endif # CPU_S3C2440
+endif # CPU_S3C2440
if CPU_S3C2442
select POWER_SUPPLY
select S3C_DEV_USB_HOST
help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_RX1950
bool "HP iPAQ rx1950"
select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
- Say Y here if you're using HP iPAQ rx1950
+ Say Y here if you're using HP iPAQ rx1950
-endif # CPU_S3C2442
+endif # CPU_S3C2442
if CPU_S3C2443 || CPU_S3C2416
help
Common setup code for SPI GPIO configurations
-endif # CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
help
Say Y here if you are using an SMDK2443
-endif # CPU_S3C2443
+endif # CPU_S3C2443
config PM_H1940
bool
help
Internal node for H1940 and related PM
-endmenu # Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"
-endif # ARCH_S3C24XX
+endif # ARCH_S3C24XX
config S3C64XX_SETUP_SPI
bool
help
- Common setup code for SPI GPIO configurations
+ Common setup code for SPI GPIO configurations
config S3C64XX_SETUP_USB_PHY
bool
# S36400 Macchine support
config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS
+ bool "SMDK6400"
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC1
config MACH_ANW6410
bool "A&W6410"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
config MACH_MINI6410
bool "MINI6410"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
config MACH_REAL6410
bool "REAL6410"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
config MACH_SMDK6410
bool "SMDK6410"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
- Select CON7 (channel 0) as the MMC/SD slot, as
+ Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
- Select CON6 (channel 1) as the MMC/SD slot, as
+ Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
config MACH_NCP
bool "NCP"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
- Machine support for the Samsung NCP
+ Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
- Shared machine support for SmartQ 5/7
+ Shared machine support for SmartQ 5/7
config MACH_SMARTQ5
bool "SmartQ 5"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select MACH_SMARTQ
help
- Machine support for the SmartQ 5
+ Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
- depends on ATAGS
+ depends on ATAGS && UNUSED_BOARD_FILES
select MACH_SMARTQ
help
- Machine support for the SmartQ 7
+ Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
static int __init mini2440_features_setup(char *str)
{
if (str)
- strlcpy(mini2440_features_str, str,
+ strscpy(mini2440_features_str, str,
sizeof(mini2440_features_str));
return 1;
}
config SA1100_CERF
bool "CerfBoard"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1110_CPUFREQ
select LEDS_GPIO_REGISTER
help
config SA1100_H3100
bool "Compaq iPAQ H3100"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
select MFD_IPAQ_MICRO
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1100_CPUFREQ
select SA1111
help
config SA1100_JORNADA720
bool "HP Jornada 720"
+ depends on UNUSED_BOARD_FILES
# FIXME: select ARM_SA11x0_CPUFREQ
select SA1111
help
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1100_CPUFREQ
help
Say Y here to support the HackKit Core CPU Board
config SA1100_LART
bool "LART"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using the Linux Advanced Radio Terminal
config SA1100_NANOENGINE
bool "nanoEngine"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1110_CPUFREQ
select FORCE_PCI
select PCI_NANOENGINE
config SA1100_PLEB
bool "PLEB"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using version 1 of the Portable Linux
config SA1100_SHANNON
bool "Shannon"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1100_CPUFREQ
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
config SA1100_SIMPAD
bool "Simpad"
+ depends on UNUSED_BOARD_FILES
select ARM_SA1110_CPUFREQ
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
config SA1100_SSP
tristate "Generic PIO SSP"
+ depends on UNUSED_BOARD_FILES
help
Say Y here to enable support for the generic PIO SSP driver.
This isn't for audio support, but for attached sensors and
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
list_del(&pos->list);
+ of_node_put(pos->np);
kfree(pos);
}
memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
quirk->id = id;
- quirk->np = np;
+ quirk->np = of_node_get(np);
quirk->i2c_msg.addr = addr;
ret = of_irq_parse_one(np, 0, argsa);
if (ret) { /* Skip invalid entry and continue */
+ of_node_put(np);
kfree(quirk);
continue;
}
err_mem:
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
list_del(&pos->list);
+ of_node_put(pos->np);
kfree(pos);
}
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+menuconfig ARCH_SUNPLUS
+ bool "Sunplus SoCs"
+ depends on ARCH_MULTI_V7
+ help
+ Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+ such as the Banana Pi BPI-F2S development board (and derivatives).
+ (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+ (<https://tibbo.com/store/plus1.html>)
+
+config SOC_SP7021
+ bool "Sunplus SP7021 SoC support"
+ depends on ARCH_SUNPLUS
+ default ARCH_SUNPLUS
+ select HAVE_ARM_ARCH_TIMER
+ select ARM_GIC
+ select ARM_PSCI
+ select PINCTRL
+ select PINCTRL_SPPCTL
+ select SERIAL_SUNPLUS
+ select SERIAL_SUNPLUS_CONSOLE
+ help
+ Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+ Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+ Ethernet, etc.), FPGA interface, chip-to-chip bus.
+ It is designed for industrial control.
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_SOC_SP7021) += sp7021.o
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+
+static const char *sp7021_compat[] __initconst = {
+ "sunplus,sp7021",
+ NULL
+};
+
+DT_MACHINE_START(SP7021_DT, "SP7021")
+ .dt_compat = sp7021_compat,
+MACHINE_END
}
zynq_devcfg_base = of_iomap(np, 0);
+ of_node_put(np);
if (!zynq_devcfg_base) {
pr_err("%s: Unable to map I/O memory\n", __func__);
return -1;
__builtin_return_address(0));
}
-void __iounmap(volatile void __iomem *io_addr)
+void iounmap(volatile void __iomem *io_addr)
{
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
struct static_vm *svm;
vunmap(addr);
}
-
-void (*arch_iounmap)(volatile void __iomem *) = __iounmap;
-
-void iounmap(volatile void __iomem *cookie)
-{
- arch_iounmap(cookie);
-}
EXPORT_SYMBOL(iounmap);
#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA)
return (void *)phys_addr;
}
-void __iounmap(volatile void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(__iounmap);
-
-void (*arch_iounmap)(volatile void __iomem *);
-
-void iounmap(volatile void __iomem *addr)
+void iounmap(volatile void __iomem *io_addr)
{
}
EXPORT_SYMBOL(iounmap);
select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANTS_NO_INSTR
+ select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARM_AMBA
select ARM_ARCH_TIMER
select GENERIC_CPU_VULNERABILITIES
select GENERIC_EARLY_IOREMAP
select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IOREMAP
select GENERIC_IRQ_IPI
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_GCC_PLUGINS
select HAVE_HW_BREAKPOINT if PERF_EVENTS
+ select HAVE_IOREMAP_PROT
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KVM
select HAVE_NMI
select THREAD_INFO_IN_TASK
select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
select TRACE_IRQFLAGS_SUPPORT
+ select TRACE_IRQFLAGS_NMI_SUPPORT
help
ARM 64-bit (AArch64) Linux support.
If unsure, say Y.
+config ARM64_ERRATUM_1742098
+ bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
+ depends on COMPAT
+ default y
+ help
+ This option removes the AES hwcap for aarch32 user-space to
+ workaround erratum 1742098 on Cortex-A57 and Cortex-A72.
+
+ Affected parts may corrupt the AES state if an interrupt is
+ taken between a pair of AES instructions. These instructions
+ are only present if the cryptography extensions are present.
+ All software should have a fallback implementation for CPUs
+ that don't implement the cryptography extensions.
+
+ If unsure, say Y.
+
config ARM64_ERRATUM_845719
bool "Cortex-A53: 845719: a load might read incorrect data"
depends on COMPAT
If unsure, say Y.
+config ARM64_ERRATUM_2441009
+ bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+ default y
+ select ARM64_WORKAROUND_REPEAT_TLBI
+ help
+ This option adds a workaround for ARM Cortex-A510 erratum #2441009.
+
+ Under very rare circumstances, affected Cortex-A510 CPUs
+ may not handle a race between a break-before-make sequence on one
+ CPU, and another CPU accessing the same page. This could allow a
+ store to a page that has been unmapped.
+
+ Work around this by adding the affected CPUs to the list that needs
+ TLB sequences to be done twice.
+
+ If unsure, say Y.
+
config ARM64_ERRATUM_2064142
bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
depends on CORESIGHT_TRBE
config ARCH_BCM4908
bool "Broadcom BCM4908 family"
+ select ARCH_BCMBCA
select GPIOLIB
help
This enables support for the Broadcom BCM4906, BCM4908 and
help
This enables support for Broadcom iProc based SoCs
+config ARCH_BCMBCA
+ bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+ help
+ Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
+ BCA chipset.
+
+ This enables support for Broadcom BCA ARM-based broadband chipsets,
+ including the DSL, PON and Wireless family of chips.
+
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
+ select PINCTRL_AC5
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
+ - 98DX2530 SoC Family
config ARCH_MXC
bool "ARMv8 based NXP i.MX SoC family"
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
+config ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ select PINCTRL
+ select GPIOLIB
+ select NPCM7XX_TIMER
+ select RESET_CONTROLLER
+ select MFD_SYSCON
+ help
+ General support for NPCM8xx BMC (Arbel).
+ Nuvoton NPCM8xx BMC based on the Cortex A35.
+
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
bool "Intel's SoCFPGA ARMv8 Families"
help
This enables support for Intel's SoCFPGA ARMv8 families:
- Stratix 10 (ex. Altera), Agilex and eASIC N5X.
+ Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
+ Agilex and eASIC N5X.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
-targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/Image.lzo: $(obj)/Image FORCE
$(call if_changed,lzo)
+
+$(obj)/Image.zst: $(obj)/Image FORCE
+ $(call if_changed,zstd)
subdir-y += marvell
subdir-y += mediatek
subdir-y += microchip
+subdir-y += nuvoton
subdir-y += nvidia
subdir-y += qcom
subdir-y += realtek
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
i2c0: i2c@5002000 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
i2c1: i2c@5002400 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
i2c2: i2c@5002800 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002800 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
i2c3: i2c@5002c00 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002c00 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
r_i2c0: i2c@7081400 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
r_i2c1: i2c@7081800 {
compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081800 0x400>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
leds {
compatible = "gpio-leds";
- status {
+ led-0 {
label = "orangepi:green:status";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- lid_switch {
+ lid-switch {
label = "Lid Switch";
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
linux,input-type = <EV_SW>;
compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
};
+&codec_analog {
+ allwinner,internal-bias-resistor;
+};
+
&sgm3140 {
enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
default-brightness-level = <400>;
};
+&codec_analog {
+ allwinner,internal-bias-resistor;
+};
+
&sgm3140 {
enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ key-sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ key-sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_XHCI>,
<&ccu CLK_BUS_XHCI>,
- <&rtc 0>;
+ <&rtc CLK_OSC32K>;
clock-names = "ref", "bus_early", "suspend";
resets = <&ccu RST_BUS_XHCI>;
/*
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "OrangePi Zero2";
+ compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+
+ aliases {
+ ethernet0 = &emac0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+ default-state = "on";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the USB-C socket */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&emac0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dcdce>;
+ allwinner,rx-delay-ps = <3100>;
+ allwinner,tx-delay-ps = <700>;
+ status = "okay";
+};
+
+&mdio0 {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdce>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp305: pmic@745 {
+ compatible = "x-powers,axp305", "x-powers,axp805",
+ "x-powers,axp806";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x745>;
+
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-sys";
+ };
+
+ reg_aldo2: aldo2 { /* 3.3V on headers */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext";
+ };
+
+ reg_aldo3: aldo3 { /* 3.3V on headers */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext2";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ bldo2 {
+ /* unused */
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ cldo1 {
+ /* reserved */
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-eth-mmc";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&pio {
+ vcc-pc-supply = <®_aldo1>;
+ vcc-pf-supply = <®_aldo1>;
+ vcc-pg-supply = <®_bldo1>;
+ vcc-ph-supply = <®_aldo1>;
+ vcc-pi-supply = <®_aldo1>;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "X96 Mate";
+ compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdce>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_dcdce>;
+ vqmmc-supply = <®_bldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp305: pmic@745 {
+ compatible = "x-powers,axp305", "x-powers,axp805",
+ "x-powers,axp806";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x745>;
+
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-sys";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext";
+ status = "disabled";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_aldo3: aldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext2";
+ status = "disabled";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_bldo2: bldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8-2";
+ status = "disabled";
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ cldo1 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc2v5";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-eth-mmc";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * 256 KiB reserved for Trusted Firmware-A (BL31).
+ * This is added by BL31 itself, but some bootloaders fail
+ * to propagate this into the DTB handed to kernels.
+ */
+ secmon@40000000 {
+ reg = <0x0 0x40000000 0x0 0x40000>;
+ no-map;
+ };
+ };
+
+ osc24M: osc24M-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
+
+ syscon: syscon@3000000 {
+ compatible = "allwinner,sun50i-h616-system-control";
+ reg = <0x03000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@28000 {
+ compatible = "mmio-sram";
+ reg = <0x00028000 0x30000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00028000 0x30000>;
+ };
+ };
+
+ ccu: clock@3001000 {
+ compatible = "allwinner,sun50i-h616-ccu";
+ reg = <0x03001000 0x1000>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ watchdog: watchdog@30090a0 {
+ compatible = "allwinner,sun50i-h616-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x030090a0 0x20>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ pio: pinctrl@300b000 {
+ compatible = "allwinner,sun50i-h616-pinctrl";
+ reg = <0x0300b000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ ext_rgmii_pins: rgmii-pins {
+ pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+ "PI5", "PI7", "PI8", "PI9", "PI10",
+ "PI11", "PI12", "PI13", "PI14", "PI15",
+ "PI16";
+ function = "emac0";
+ drive-strength = <40>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pins = "PI6", "PI7";
+ function = "i2c0";
+ };
+
+ i2c3_ph_pins: i2c3-ph-pins {
+ pins = "PH4", "PH5";
+ function = "i2c3";
+ };
+
+ ir_rx_pin: ir-rx-pin {
+ pins = "PH10";
+ function = "ir_rx";
+ };
+
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC0", "PC1", "PC5", "PC6",
+ "PC8", "PC9", "PC10", "PC11",
+ "PC13", "PC14", "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
+ spi0_pins: spi0-pins {
+ pins = "PC0", "PC2", "PC4";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi0_cs0_pin: spi0-cs0-pin {
+ pins = "PC3";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi1_pins: spi1-pins {
+ pins = "PH6", "PH7", "PH8";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs0_pin: spi1-cs0-pin {
+ pins = "PH5";
+ function = "spi1";
+ };
+
+ uart0_ph_pins: uart0-ph-pins {
+ pins = "PH0", "PH1";
+ function = "uart0";
+ };
+
+ /omit-if-no-ref/
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
+ };
+
+ gic: interrupt-controller@3021000 {
+ compatible = "arm,gic-400";
+ reg = <0x03021000 0x1000>,
+ <0x03022000 0x2000>,
+ <0x03024000 0x2000>,
+ <0x03026000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ mmc0: mmc@4020000 {
+ compatible = "allwinner,sun50i-h616-mmc",
+ "allwinner,sun50i-a100-mmc";
+ reg = <0x04020000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "disabled";
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@4021000 {
+ compatible = "allwinner,sun50i-h616-mmc",
+ "allwinner,sun50i-a100-mmc";
+ reg = <0x04021000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "disabled";
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@4022000 {
+ compatible = "allwinner,sun50i-h616-emmc",
+ "allwinner,sun50i-a100-emmc";
+ reg = <0x04022000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ status = "disabled";
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@5000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@5000400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@5000800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@5001000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05001000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial@5001400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05001400 0x400>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@5002000 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002000 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@5002400 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002400 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@5002800 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002800 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@5002c00 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002c00 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@5003000 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05003000 0x400>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@5010000 {
+ compatible = "allwinner,sun50i-h616-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x05010000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@5011000 {
+ compatible = "allwinner,sun50i-h616-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x05011000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emac0: ethernet@5020000 {
+ compatible = "allwinner,sun50i-h616-emac0",
+ "allwinner,sun50i-a64-emac";
+ reg = <0x05020000 0x10000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&ccu CLK_BUS_EMAC0>;
+ clock-names = "stmmaceth";
+ resets = <&ccu RST_BUS_EMAC0>;
+ reset-names = "stmmaceth";
+ syscon = <&syscon>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ rtc: rtc@7000000 {
+ compatible = "allwinner,sun50i-h616-rtc";
+ reg = <0x07000000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
+ <&ccu CLK_PLL_SYSTEM_32K>;
+ clock-names = "bus", "hosc",
+ "pll-32k";
+ #clock-cells = <1>;
+ };
+
+ r_ccu: clock@7010000 {
+ compatible = "allwinner,sun50i-h616-r-ccu";
+ reg = <0x07010000 0x210>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_pio: pinctrl@7022000 {
+ compatible = "allwinner,sun50i-h616-r-pinctrl";
+ reg = <0x07022000 0x400>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+
+ /omit-if-no-ref/
+ r_i2c_pins: r-i2c-pins {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ };
+
+ r_rsb_pins: r-rsb-pins {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ };
+ };
+
+ ir: ir@7040000 {
+ compatible = "allwinner,sun50i-h616-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x07040000 0x400>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_IR>,
+ <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_R_APB1_IR>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx_pin>;
+ status = "disabled";
+ };
+
+ r_i2c: i2c@7081400 {
+ compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C>;
+ resets = <&r_ccu RST_R_APB2_I2C>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_rsb: rsb@7083000 {
+ compatible = "allwinner,sun50i-h616-rsb",
+ "allwinner,sun8i-a23-rsb";
+ reg = <0x07083000 0x400>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_RSB>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu RST_R_APB2_RSB>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
- socfpga_stratix10_socdk_nand.dtb
+ socfpga_stratix10_socdk_nand.dtb \
+ socfpga_stratix10_swvp.dtb
<0x0 0xfffc6000 0x0 0x2000>;
};
+ clocks {
+ cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb-intosc-ls-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s-free-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ qspi_clk: qspi-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
#clock-cells = <1>;
};
- clocks {
- cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- };
-
- cb_intosc_ls_clk: cb-intosc-ls-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- };
-
- f2s_free_clk: f2s-free-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- };
-
- osc1: osc1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- };
-
- qspi_clk: qspi-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- };
- };
-
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff800000 0x2000>;
};
qspi: spi@ff8d2000 {
- compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+ compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff8d2000 0x100>,
};
soc {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
-
eccmgr {
sdmmca-ecc@ff8c8c00 {
compatible = "altr,socfpga-s10-sdmmc-ecc",
bus-width = <4>;
};
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
};
soc {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
-
eccmgr {
sdmmca-ecc@ff8c8c00 {
compatible = "altr,socfpga-s10-sdmmc-ecc",
};
};
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022, Intel Corporation
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SOCFPGA Stratix 10 SWVP";
+ compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ linux,initrd-start = <0x10000000>;
+ linux,initrd-end = <0x125c8324>;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&cpu0 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu1 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu2 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu3 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+ snps,max-mtu = <0x0>;
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+};
+
+&mmc {
+ status = "okay";
+ altr,dw-mshc-ciu-div = <0x3>;
+ altr,dw-mshc-sdr-timing = <0x0 0x3>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+ status = "okay";
+};
+
+&usb1 {
+ clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+ status = "okay";
+};
+
+&rst {
+ altr,modrst-offset = <0x20>;
+};
+
+&sysmgr {
+ reg = <0xffd12000 0x1000>;
+ interrupts = <0x0 0x10 0x4>;
+ cpu1-start-addr = <0xffd06230>;
+};
};
psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ compatible = "arm,psci-0.2";
+ method = "smc";
};
};
};
psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ compatible = "arm,psci-0.2";
+ method = "smc";
};
};
sysctrl_AO: sys-ctrl@0 {
compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
+ reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-axg-aoclkc";
rtc1 = &vrtc;
};
+ gpio_fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ /* Using Dummy Speed */
+ gpio-fan,speed-map = <0 0>, <1 1>;
+ #cooling-cells = <2>;
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
power-button {
status = "okay";
};
+&cpu_thermal {
+ trips {
+ cpu_active: cpu-active {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_active>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
&frddr_a {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
power-button {
sysctrl_AO: sys-ctrl@0 {
compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
+ reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-gx-aoclkc";
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
button-reset {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
button-power {
clocks = <&xtal>, <&xtal>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
+
+ reset: reset-controller@2000 {
+ compatible = "amlogic,meson-s4-reset";
+ reg = <0x0 0x2000 0x0 0x98>;
+ #reset-cells = <1>;
+ };
};
};
};
gpio-keys {
compatible = "gpio-keys";
- key1 {
+ key-1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};
- key2 {
+ key-2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};
- key3 {
+ key-3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
};
- mic_mute {
+ key-mic-mute {
label = "MicMute";
linux,code = <SW_MUTE_DEVICE>;
linux,input-type = <EV_SW>;
interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
};
- power_key {
+ key-power {
label = "PowerKey";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
gpio-keys {
compatible = "gpio-keys";
- button@1 {
+ button {
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
gpio-keys {
compatible = "gpio-keys";
- button@1 {
+ button {
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
interrupts = <0x0 0x4c 0x4>;
};
- /* Do not change dwusb name, coded for backward compatibility */
- usb0: dwusb@19000000 {
+ /* Node-name might need to be coded as dwusb for backward compatibility */
+ usb0: usb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
- reg = <0x0 0x19000000 0x0 0x100000>;
+ reg = <0x0 0x19000000 0x0 0x100000>;
interrupts = <0x0 0x5d 0x4>;
dma-coherent;
dr_mode = "host";
phy-names = "sata-phy";
};
- /* Do not change dwusb name, coded for backward compatibility */
- usb0: dwusb@19000000 {
+ /* Node-name might need to be coded as dwusb for backward compatibility */
+ usb0: usb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
- reg = <0x0 0x19000000 0x0 0x100000>;
+ reg = <0x0 0x19000000 0x0 0x100000>;
interrupts = <0x0 0x89 0x4>;
dma-coherent;
dr_mode = "host";
};
- usb1: dwusb@19800000 {
+ usb1: usb@19800000 {
status = "disabled";
compatible = "snps,dwc3";
- reg = <0x0 0x19800000 0x0 0x100000>;
+ reg = <0x0 0x19800000 0x0 0x100000>;
interrupts = <0x0 0x8a 0x4>;
dma-coherent;
dr_mode = "host";
};
panel {
- compatible = "arm,rtsm-display", "panel-dpi";
+ compatible = "arm,rtsm-display";
port {
panel_in: endpoint {
remote-endpoint = <&clcd_pads>;
trig-conns@0 {
reg = <0>;
- arm,trig-in-sigs=<2 3>;
- arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
- arm,trig-out-sigs=<0 1>;
- arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,trig-in-sigs = <2 3>;
+ arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs = <0 1>;
+ arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
arm,cs-dev-assoc = <&etr_sys>;
};
trig-conns@1 {
reg = <1>;
- arm,trig-in-sigs=<0 1>;
- arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
- arm,trig-out-sigs=<7 6>;
- arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,trig-in-sigs = <0 1>;
+ arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs = <7 6>;
+ arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
arm,cs-dev-assoc = <&etf_sys0>;
};
trig-conns@2 {
reg = <2>;
- arm,trig-in-sigs=<4 5 6 7>;
- arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW
+ arm,trig-in-sigs = <4 5 6 7>;
+ arm,trig-in-types = <STM_TOUT_SPTE STM_TOUT_SW
STM_TOUT_HETE STM_ASYNCOUT>;
- arm,trig-out-sigs=<4 5>;
- arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>;
+ arm,trig-out-sigs = <4 5>;
+ arm,trig-out-types = <STM_HWEVENT STM_HWEVENT>;
arm,cs-dev-assoc = <&stm_sys>;
};
trig-conns@3 {
reg = <3>;
- arm,trig-out-sigs=<2 3>;
- arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,trig-out-sigs = <2 3>;
+ arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
arm,cs-dev-assoc = <&tpiu_sys>;
};
};
trig-conns@0 {
reg = <0>;
- arm,trig-in-sigs=<0>;
- arm,trig-in-types=<GEN_INTREQ>;
- arm,trig-out-sigs=<0>;
- arm,trig-out-types=<GEN_HALTREQ>;
+ arm,trig-in-sigs = <0>;
+ arm,trig-in-types = <GEN_INTREQ>;
+ arm,trig-out-sigs = <0>;
+ arm,trig-out-types = <GEN_HALTREQ>;
arm,trig-conn-name = "sys_profiler";
};
trig-conns@1 {
reg = <1>;
- arm,trig-out-sigs=<2 3>;
- arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-out-sigs = <2 3>;
+ arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
arm,trig-conn-name = "watchdog";
};
trig-conns@2 {
reg = <2>;
- arm,trig-out-sigs=<1 6>;
- arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-out-sigs = <1 6>;
+ arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
arm,trig-conn-name = "g_counter";
};
};
trig-conns@0 {
reg = <0>;
- arm,trig-in-sigs=<0 1>;
- arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
- arm,trig-out-sigs=<0 1>;
- arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,trig-in-sigs = <0 1>;
+ arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs = <0 1>;
+ arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
arm,cs-dev-assoc = <&etf_sys1>;
};
trig-conns@1 {
reg = <1>;
- arm,trig-in-sigs=<2 3 4>;
- arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+ arm,trig-in-sigs = <2 3 4>;
+ arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
arm,trig-conn-name = "ela_clus_0";
};
trig-conns@2 {
reg = <2>;
- arm,trig-in-sigs=<5 6 7>;
- arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+ arm,trig-in-sigs = <5 6 7>;
+ arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
arm,trig-conn-name = "ela_clus_1";
};
};
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
+ cache-level = <2>;
};
A53_L2: l2-cache1 {
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
+ cache-level = <2>;
};
};
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
+ cache-level = <2>;
};
A53_L2: l2-cache1 {
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
+ cache-level = <2>;
};
};
&mailbox {
compatible = "arm,mhu-doorbell", "arm,primecell";
#mbox-cells = <2>;
- mbox-name = "ARM-MHU";
};
&smmu_etr {
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
+ cache-level = <2>;
};
A53_L2: l2-cache1 {
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
+ cache-level = <2>;
};
};
bcm2837-rpi-zero-2-w.dtb
subdir-y += bcm4908
+subdir-y += bcmbca
subdir-y += northstar2
subdir-y += stingray
compatible = "gpio-keys-polled";
poll-interval = <100>;
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
compatible = "gpio-keys-polled";
poll-interval = <100>;
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+ bcm4912-asus-gt-ax6000.dtb \
+ bcm94912.dtb \
+ bcm963158.dtb \
+ bcm96858.dtb \
+ bcm963146.dtb \
+ bcm96856.dtb \
+ bcm96813.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+ compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
+ model = "Asus GT-AX6000";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00 0x00 0x00 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm4912", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm63146", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm63158", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm6813", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm6856", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>;
+ };
+
+ clocks: clocks {
+ periph_clk:periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>, /* GICD */
+ <0x2000 0x2000>, /* GICC */
+ <0x4000 0x2000>, /* GICH */
+ <0x6000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x18>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm6858", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
+ clocks: clocks {
+ periph_clk:periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>, /* GICD */
+ <0x2000 0x2000>, /* GICC */
+ <0x4000 0x2000>, /* GICH */
+ <0x6000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x62000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x18>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+ model = "Broadcom BCM94912 Reference Board";
+ compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63146.dtsi"
+
+/ {
+ model = "Broadcom BCM963146 Reference Board";
+ compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+ model = "Broadcom BCM963158 Reference Board";
+ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6813.dtsi"
+
+/ {
+ model = "Broadcom BCM96813 Reference Board";
+ compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6856.dtsi"
+
+/ {
+ model = "Broadcom BCM96856 Reference Board";
+ compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+ model = "Broadcom BCM96858 Reference Board";
+ compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
reg-names = "amac_base";
dma-coherent;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
- status= "disabled";
+ status = "disabled";
};
nand: nand@360000 {
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE 0
+#define EXYNOS_PIN_PULL_DOWN 1
+#define EXYNOS_PIN_PULL_UP 3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0 0
+#define EXYNOS_PIN_PDN_OUT1 1
+#define EXYNOS_PIN_PDN_INPUT 2
+#define EXYNOS_PIN_PDN_PREV 3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800, Exynos7885, Exynos850
+ * (except GPIO_HSI block), ExynosAutov9 (FSI0, PERIC1)
+ */
+#define EXYNOS5420_PIN_DRV_LV1 0
+#define EXYNOS5420_PIN_DRV_LV2 1
+#define EXYNOS5420_PIN_DRV_LV3 2
+#define EXYNOS5420_PIN_DRV_LV4 3
+
+/* Drive strengths for Exynos5433 */
+#define EXYNOS5433_PIN_DRV_FAST_SR1 0
+#define EXYNOS5433_PIN_DRV_FAST_SR2 1
+#define EXYNOS5433_PIN_DRV_FAST_SR3 2
+#define EXYNOS5433_PIN_DRV_FAST_SR4 3
+#define EXYNOS5433_PIN_DRV_FAST_SR5 4
+#define EXYNOS5433_PIN_DRV_FAST_SR6 5
+#define EXYNOS5433_PIN_DRV_SLOW_SR1 8
+#define EXYNOS5433_PIN_DRV_SLOW_SR2 9
+#define EXYNOS5433_PIN_DRV_SLOW_SR3 0xa
+#define EXYNOS5433_PIN_DRV_SLOW_SR4 0xb
+#define EXYNOS5433_PIN_DRV_SLOW_SR5 0xc
+#define EXYNOS5433_PIN_DRV_SLOW_SR6 0xf
+
+/* Drive strengths for Exynos7 (except FSYS1) */
+#define EXYNOS7_PIN_DRV_LV1 0
+#define EXYNOS7_PIN_DRV_LV2 2
+#define EXYNOS7_PIN_DRV_LV3 1
+#define EXYNOS7_PIN_DRV_LV4 3
+
+/* Drive strengths for Exynos7 FSYS1 block */
+#define EXYNOS7_FSYS1_PIN_DRV_LV1 0
+#define EXYNOS7_FSYS1_PIN_DRV_LV2 4
+#define EXYNOS7_FSYS1_PIN_DRV_LV3 2
+#define EXYNOS7_FSYS1_PIN_DRV_LV4 6
+#define EXYNOS7_FSYS1_PIN_DRV_LV5 1
+#define EXYNOS7_FSYS1_PIN_DRV_LV6 5
+
+/* Drive strengths for Exynos850 GPIO_HSI block */
+#define EXYNOS850_HSI_PIN_DRV_LV1 0 /* 1x */
+#define EXYNOS850_HSI_PIN_DRV_LV1_5 1 /* 1.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV2 2 /* 2x */
+#define EXYNOS850_HSI_PIN_DRV_LV2_5 3 /* 2.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV3 4 /* 3x */
+#define EXYNOS850_HSI_PIN_DRV_LV4 5 /* 4x */
+
+#define EXYNOS_PIN_FUNC_INPUT 0
+#define EXYNOS_PIN_FUNC_OUTPUT 1
+#define EXYNOS_PIN_FUNC_2 2
+#define EXYNOS_PIN_FUNC_3 3
+#define EXYNOS_PIN_FUNC_4 4
+#define EXYNOS_PIN_FUNC_5 5
+#define EXYNOS_PIN_FUNC_6 6
+#define EXYNOS_PIN_FUNC_EINT 0xf
+#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ */
* tree nodes are listed in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
#define PIN(_pin, _func, _pull, _drv) \
pin- ## _pin { \
};
};
- mshc_0: mshc@15540000 {
+ mshc_0: mmc@15540000 {
compatible = "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
};
- mshc_1: mshc@15550000 {
+ mshc_1: mmc@15550000 {
compatible = "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
};
- mshc_2: mshc@15560000 {
+ mshc_2: mmc@15560000 {
compatible = "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
pmic_irq: pmic-irq-pins {
samsung,pins = "gpa0-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
};
samsung,pins = "gph1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
usb3drd_boost_en: usb3drd-boost-en-pins {
samsung,pins = "gpf4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
* device tree nodes in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_alive {
gpa0: gpa0-gpio-bank {
samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c11_bus: hs-i2c11-bus-pins {
samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c2_bus: hs-i2c2-bus-pins {
samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart0_data: uart0-data-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart2_data: uart2-data-pins {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c3_bus: hs-i2c3-bus-pins {
samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart1_data: uart1-data-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c0_bus: hs-i2c0-bus-pins {
samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus-pins {
samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c9_bus: hs-i2c9-bus-pins {
samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out-pins {
samsung,pins = "gpd2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out-pins {
samsung,pins = "gpd2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out-pins {
samsung,pins = "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out-pins {
samsung,pins = "gpd2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c8_bus: hs-i2c8-bus-pins {
samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
uart3_data: uart3-data-pins {
samsung,pins = "gpd5-0", "gpd5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus-pins {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus-pins {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus-pins {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c4_bus: hs-i2c4-bus-pins {
samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
hs_i2c5_bus: hs-i2c5-bus-pins {
samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
samsung,pins = "gpr4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpr4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd-pins {
samsung,pins = "gpr4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpr4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
};
};
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
ufs_refclk_out: ufs-refclk-out-pins {
samsung,pins = "gpg2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
};
ufs_rst_n: ufs-rst-n-pins {
samsung,pins = "gph1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
};
};
};
+&mmc_0 {
+ status = "okay";
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ mmc-hs400-enhanced-strobe;
+ card-detect-delay = <200>;
+ clock-frequency = <800000000>;
+ bus-width = <8>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <2 4>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs
+ &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+};
+
&oscclk {
clock-frequency = <26000000>;
};
* device tree nodes in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
&pinctrl_alive {
etc0: etc0-gpio-bank {
clock-names = "oscclk";
};
+ cmu_fsys: clock-controller@13400000 {
+ compatible = "samsung,exynos7885-cmu-fsys";
+ reg = <0x13400000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLK_DOUT_FSYS_BUS>,
+ <&cmu_top CLK_DOUT_FSYS_MMC_CARD>,
+ <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>,
+ <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>,
+ <&cmu_top CLK_DOUT_FSYS_USB30DRD>;
+ clock-names = "oscclk",
+ "dout_fsys_bus",
+ "dout_fsys_mmc_card",
+ "dout_fsys_mmc_embd",
+ "dout_fsys_mmc_sdio",
+ "dout_fsys_usb30drd";
+ };
+
pinctrl_alive: pinctrl@11cb0000 {
compatible = "samsung,exynos7885-pinctrl";
reg = <0x11cb0000 0x1000>;
reg = <0x11c80000 0x10000>;
};
+ mmc_0: mmc@13500000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ reg = <0x13500000 0x2000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>,
+ <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
serial_0: serial@13800000 {
compatible = "samsung,exynos5433-uart";
reg = <0x13800000 0x100>;
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_alive {
gpa0: gpa0-gpio-bank {
* device tree nodes in this file.
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
&pinctrl_alive {
gpa0: gpa0-gpio-bank {
/* PERIC1 USI11_SPI */
spi11_bus: spi11-pins {
- samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+ samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi11_cs: spi11-cs-pins {
- samsung,pins = "gpp3-7";
+ samsung,pins = "gpp5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi11_cs_func: spi11-cs-func-pins {
- samsung,pins = "gpp3-7";
+ samsung,pins = "gpp5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
regulator-boot-on;
enable-active-high;
};
+
+ ufs_1_fixed_vcc_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "ufs-vcc";
+ gpio = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
};
&serial_0 {
+ pinctrl-0 = <&uart0_bus_dual>;
status = "okay";
};
status = "okay";
};
+&ufs_1_phy {
+ status = "okay";
+};
+
&ufs_0 {
status = "okay";
vcc-supply = <&ufs_0_fixed_vcc_reg>;
vcc-fixed-regulator;
};
+&ufs_1 {
+ status = "okay";
+ vcc-supply = <&ufs_1_fixed_vcc_reg>;
+ vcc-fixed-regulator;
+};
+
&usi_0 {
+ samsung,clkreq-on; /* needed for UART mode */
status = "okay";
};
#include <dt-bindings/clock/samsung,exynosautov9.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,boot-mode.h>
#include <dt-bindings/soc/samsung,exynos-usi.h>
/ {
IRQ_TYPE_LEVEL_HIGH)>;
};
+ pdma0: dma-controller@1b2e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x1b2e0000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>;
+ clock-names = "apb_pclk";
+ arm,pl330-broken-no-flushp;
+ #dma-cells = <1>;
+ };
+
pinctrl_alive: pinctrl@10450000 {
compatible = "samsung,exynosautov9-pinctrl";
reg = <0x10450000 0x1000>;
pmu_system_controller: system-controller@10460000 {
compatible = "samsung,exynos7-pmu", "syscon";
reg = <0x10460000 0x10000>;
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+ value = <0x2>;
+ mask = <0x2>;
+ };
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x810>; /* SYSIP_DAT0 */
+ mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>;
+ mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>;
+ mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>;
+ };
};
syscon_fsys2: syscon@17c20000 {
reg = <0x10220000 0x2000>;
};
+ syscon_peric1: syscon@10820000 {
+ compatible = "samsung,exynosautov9-sysreg", "syscon";
+ reg = <0x10820000 0x2000>;
+ };
+
usi_0: usi@103000c0 {
- compatible = "samsung,exynos850-usi";
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
reg = <0x103000c0 0x20>;
samsung,sysreg = <&syscon_peric0 0x1000>;
samsung,mode = <USI_V2_UART>;
- samsung,clkreq-on; /* needed for UART mode */
#address-cells = <1>;
#size-cells = <1>;
ranges;
clock-names = "pclk", "ipclk";
status = "disabled";
- /* USI: UART */
serial_0: serial@10300000 {
- compatible = "samsung,exynos850-uart";
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
reg = <0x10300000 0xc0>;
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&uart0_bus_dual>;
+ pinctrl-0 = <&uart0_bus>;
clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
<&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
+ spi_0: spi@10300000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10300000 0x30>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 1>, <&pdma0 0>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_0: i2c@10300000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10300000 0xc0>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c0_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_0: usi@103100c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103100c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1004>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_1: i2c@10310000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10310000 0xc0>;
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c1_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_1: usi@103200c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103200c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1008>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_1: serial@10320000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10320000 0xc0>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
+ spi_1: spi@10320000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10320000 0x30>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 3>, <&pdma0 2>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_2: i2c@10320000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10320000 0xc0>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c2_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_1: usi@103300c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103300c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x100c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_3: i2c@10330000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10330000 0xc0>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c3_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_2: usi@103400c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103400c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1010>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_2: serial@10340000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10340000 0xc0>;
+ interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_2: spi@10340000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10340000 0x30>;
+ interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 5>, <&pdma0 4>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_4: i2c@10340000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10340000 0xc0>;
+ interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c4_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_2: usi@103500c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103500c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1014>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_5: i2c@10350000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10350000 0xc0>;
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c5_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_3: usi@103600c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103600c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1018>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_3: serial@10360000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10360000 0xc0>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_3: spi@10360000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10360000 0x30>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 7>, <&pdma0 6>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_6: i2c@10360000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10360000 0xc0>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c6_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_3: usi@103700c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103700c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x101c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_7: i2c@10370000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10370000 0xc0>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c7_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_4: usi@103800c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103800c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1020>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_4: serial@10380000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10380000 0xc0>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_4: spi@10380000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10380000 0x30>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_8: i2c@10380000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10380000 0xc0>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c8_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_4: usi@103900c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103900c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1024>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_9: i2c@10390000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10390000 0xc0>;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c9_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_5: usi@103a00c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103a00c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1028>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_5: serial@103a0000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x103a0000 0xc0>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_5: spi@103a0000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x103a0000 0x30>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_10: i2c@103a0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x103a0000 0xc0>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c10_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_5: usi@103b00c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x103b00c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x102c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_11: i2c@103b0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x103b0000 0xc0>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c11_bus>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_6: usi@109000c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109000c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1000>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_6: serial@10900000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10900000 0xc0>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
+ spi_6: spi@10900000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10900000 0x30>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 13>, <&pdma0 12>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_12: i2c@10900000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10900000 0xc0>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c12_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_6: usi@109100c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109100c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1004>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_13: i2c@10910000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10910000 0xc0>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c13_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_7: usi@109200c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109200c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1008>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_7: serial@10920000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10920000 0xc0>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_7: spi@10920000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10920000 0x30>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 15>, <&pdma0 14>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_14: i2c@10920000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10920000 0xc0>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c14_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_7: usi@109300c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109300c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x100c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_15: i2c@10930000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10930000 0xc0>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c15_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_8: usi@109400c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109400c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1010>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_8: serial@10940000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10940000 0xc0>;
+ interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_8: spi@10940000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10940000 0x30>;
+ interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 17>, <&pdma0 16>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_16: i2c@10940000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10940000 0xc0>;
+ interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c16_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_8: usi@109500c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109500c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1014>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_17: i2c@10950000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10950000 0xc0>;
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c17_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_9: usi@109600c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109600c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1018>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_9: serial@10960000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10960000 0xc0>;
+ interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_9: spi@10960000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10960000 0x30>;
+ interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 19>, <&pdma0 18>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_18: i2c@10960000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10960000 0xc0>;
+ interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c18_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_9: usi@109700c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109700c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x101c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_19: i2c@10970000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10970000 0xc0>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c19_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_10: usi@109800c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109800c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1020>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_10: serial@10980000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10980000 0xc0>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart10_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_10: spi@10980000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x10980000 0x30>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 21>, <&pdma0 20>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_20: i2c@10980000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10980000 0xc0>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c20_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
- ufs_0_phy: ufs0-phy@17e04000 {
+ usi_i2c_10: usi@109900c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109900c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1024>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_21: i2c@10990000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x10990000 0xc0>;
+ interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c21_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_11: usi@109a00c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109a00c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x1028>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_11: serial@109a0000 {
+ compatible = "samsung,exynosautov9-uart",
+ "samsung,exynos850-uart";
+ reg = <0x109a0000 0xc0>;
+ interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart11_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_11: spi@109a0000 {
+ compatible = "samsung,exynosautov9-spi";
+ reg = <0x109a0000 0x30>;
+ interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_22: i2c@109a0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x109a0000 0xc0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c22_bus>;
+ interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_11: usi@109b00c0 {
+ compatible = "samsung,exynosautov9-usi",
+ "samsung,exynos850-usi";
+ reg = <0x109b00c0 0x20>;
+ samsung,sysreg = <&syscon_peric1 0x102c>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_23: i2c@109b0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x109b0000 0xc0>;
+ interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c23_bus>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ ufs_0_phy: phy@17e04000 {
compatible = "samsung,exynosautov9-ufs-phy";
reg = <0x17e04000 0xc00>;
reg-names = "phy-pma";
status = "disabled";
};
- ufs_0: ufs0@17e00000 {
- compatible ="samsung,exynosautov9-ufs";
+ ufs_0: ufs@17e00000 {
+ compatible = "samsung,exynosautov9-ufs";
- reg = <0x17e00000 0x100>, /* 0: HCI standard */
- <0x17e01100 0x410>, /* 1: Vendor-specific */
- <0x17e80000 0x8000>, /* 2: UNIPRO */
- <0x17dc0000 0x2200>; /* 3: UFS protector */
+ reg = <0x17e00000 0x100>,
+ <0x17e01100 0x410>,
+ <0x17e80000 0x8000>,
+ <0x17dc0000 0x2200>;
reg-names = "hci", "vs_hci", "unipro", "ufsp";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
samsung,sysreg = <&syscon_fsys2 0x710>;
status = "disabled";
};
+
+ ufs_1_phy: phy@17f04000 {
+ compatible = "samsung,exynosautov9-ufs-phy";
+ reg = <0x17f04000 0xc00>;
+ reg-names = "phy-pma";
+ samsung,pmu-syscon = <&pmu_system_controller 0x72c>;
+ #phy-cells = <0>;
+ clocks = <&xtcxo>;
+ clock-names = "ref_clk";
+ status = "disabled";
+ };
+
+ ufs_1: ufs@17f00000 {
+ compatible = "samsung,exynosautov9-ufs";
+
+ reg = <0x17f00000 0x100>,
+ <0x17f01100 0x410>,
+ <0x17f80000 0x8000>,
+ <0x17de0000 0x2200>;
+ reg-names = "hci", "vs_hci", "unipro", "ufsp";
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>,
+ <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>;
+ clock-names = "core_clk", "sclk_unipro_main";
+ freq-table-hz = <0 0>, <0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>;
+ phys = <&ufs_1_phy>;
+ phy-names = "ufs-phy";
+ samsung,sysreg = <&syscon_fsys2 0x714>;
+ status = "disabled";
+ };
+
+ watchdog_cl0: watchdog@10050000 {
+ compatible = "samsung,exynosautov9-wdt";
+ reg = <0x10050000 0x100>;
+ interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <0>;
+ };
+
+ watchdog_cl1: watchdog@10060000 {
+ compatible = "samsung,exynosautov9-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <1>;
+ };
};
};
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a11", "jedec,spi-nor";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1021a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
sec_mon: sec_mon@1e90000 {
compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
"fsl,sec-v4.0-mon";
status = "disabled";
};
- edma0: edma@2c00000 {
+ edma0: dma-controller@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&enetc_mdio_pf3>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
/* on-board RGMII PHY */
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&rst>;
offset = <0>;
mask = <0x02>;
};
gic: interrupt-controller@6000000 {
- compatible= "arm,gic-v3";
+ compatible = "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
- #interrupt-cells= <3>;
+ #interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <0 71 0x4>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <0 72 0x4>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <0 73 0x4>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <0 74 0x4>;
};
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1021a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
big-endian;
};
- edma0: edma@2c00000 {
+ edma0: dma-controller@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
};
ranges = <0x0 0x5 0x08000000 0x8000000>;
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1021a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
- edma0: edma@2c00000 {
+ edma0: dma-controller@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
* external power off (e.g ATX Power Button)
* asserted
*/
- powerdn {
+ button-powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
/* Rear Panel 'ADMIN' button (GPIO_H) */
- admin {
+ button-admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
leds {
compatible = "gpio-leds";
- sfp1down {
+ led-0 {
label = "ten64:green:sfp1:down";
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
};
- sfp2up {
+ led-1 {
label = "ten64:green:sfp2:up";
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
};
- admin {
+ led-2 {
label = "ten64:admin";
gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
};
};
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1028a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&rstcr>;
offset = <0x0>;
mask = <0x2>;
little-endian;
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1028a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
isc: syscon@1f70000 {
compatible = "fsl,ls2080a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* On-board PHY #1 RGMI1*/
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* Slot #1 (secondary EMI) */
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
little-endian;
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1028a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ };
+
isc: syscon@1f70000 {
compatible = "fsl,lx2160a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* Slot #1 (secondary EMI) */
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
status = "disabled";
};
assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
status = "disabled";
};
&usbotg1 {
vbus-supply = <®_usbotg1>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
&usbotg2 {
pinctrl-names = "default";
disable-over-current;
- dr_mode="host";
+ dr_mode = "host";
status = "okay";
};
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8524-audio";
status = "okay";
};
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
};
reg_buck1: buck1 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck2: buck2 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck3: buck3 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck4: buck4 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck5: buck5 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck6: buck6 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-1 {
label = "TestLed601";
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- user2 {
+ led-2 {
label = "TestLed602";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK";
+ compatible = "phytec,imx8mm-phyboard-polis-rdk",
+ "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ bt_osc_32k: bt-lp-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "bt_osc_32k";
+ #clock-cells = <0>;
+ };
+
+ can_osc_40m: can-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ clock-output-names = "can_osc_40m";
+ #clock-cells = <0>;
+ };
+
+ fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0
+ 13000 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan>;
+ #cooling-cells = <2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc2";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_CPU;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ usdhc1_pwrseq: pwr-seq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <60>;
+ reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "CAN_EN";
+ startup-delay-us = <20>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1pwrgrp>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <20000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ };
+
+ reg_vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VCC_3V3";
+ };
+};
+
+/* SPI - CAN MCP251XFD */
+&ecspi1 {
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ can0: can@0 {
+ compatible = "microchip,mcp251xfd";
+ clocks = <&can_osc_40m>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ xceiver-supply = <®_can_en>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT",
+ "", "", "", "RESET_ETHPHY",
+ "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
+ "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "",
+ "", "", "BT_REG_ON", "WL_REG_ON",
+ "BT_DEV_WAKE", "BT_HOST_WAKE", "", "",
+ "X_SD2_CD_B", "", "", "",
+ "", "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "FAN", "miniPCIe_nPERST", "", "",
+ "COEX1", "COEX2";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "ECSPI1_SS0";
+};
+
+/* PCIe */
+&pcie0 {
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_PHY>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ status = "okay";
+};
+
+&rv3028 {
+ trickle-resistor-ohms = <3000>;
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* UART - RS232/RS485 */
+&uart1 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* UART - Sterling-LWB Bluetooth */
+&uart2 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ fsl,dte-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_bt>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&bt_osc_32k>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wakeup";
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+ max-speed = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt>;
+ shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <®_vcc_3v3>;
+ };
+};
+
+/* UART - console */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+ adp-disable;
+ dr_mode = "otg";
+ over-current-active-low;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ srp-disable;
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ disable-over-current;
+ dr_mode = "host";
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+};
+
+/* SDIO - Sterling-LWB Wifi */
+&usdhc1 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ non-removable;
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+/* SD-Card */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <®_nvcc_sd2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00
+ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00
+ >;
+ };
+
+ pinctrl_can_en: can-engrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00
+ >;
+ };
+
+ pinctrl_can_int: can-intgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00
+ >;
+ };
+
+ pinctrl_fan: fan0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16
+ >;
+ };
+
+ pinctrl_leds: leds1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16
+ MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00
+ >;
+ };
+
+ pinctrl_uart2_bt: uart2btgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usbotg1pwrgrp: usbotg1pwrgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_wlan: wlangrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "PHYTEC phyCORE-i.MX8MM";
+ compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+ aliases {
+ rtc0 = &rv3028;
+ rtc1 = &snvs_rtc;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ reg_vdd_3v3_s: regulator-vdd-3v3-s {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD_3V3_S";
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+/* Ethernet */
+&fec1 {
+ fsl,magic-packet;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ enet-phy-lane-no-swap;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ reg = <0>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ };
+ };
+};
+
+/* SPI Flash */
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ som_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT",
+ "", "", "", "RESET_ETHPHY",
+ "", "", "nENABLE_FLATLINK";
+};
+
+/* I2C1 */
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default","gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "nxp,pf8121a";
+ reg = <0x08>;
+
+ regulators {
+ reg_nvcc_sd1: ldo1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "NVCC_SD1 (LDO1)";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_nvcc_sd2: ldo2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "NVCC_SD2 (LDO2)";
+ vselect-en;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_vcc_enet: ldo3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2500000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-name = "VCC_ENET_2V5 (LDO3)";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_vdda_1v8: ldo4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-name = "VDDA_1V8 (LDO4)";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt = <1500000>;
+ regulator-suspend-max-microvolt = <1500000>;
+ };
+ };
+
+ reg_soc_vdda_phy: buck1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microvolt = <400000>;
+ regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt = <400000>;
+ regulator-suspend-max-microvolt = <400000>;
+ };
+ };
+
+ reg_vdd_gpu_dram: buck2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-name = "VDD_GPU_DRAM (BUCK2)";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1000000>;
+ regulator-suspend-min-microvolt = <1000000>;
+ };
+ };
+
+ reg_vdd_gpu: buck3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <400000>;
+ regulator-name = "VDD_VPU (BUCK3)";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_vdd_mipi: buck4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <900000>;
+ regulator-name = "VDD_MIPI_0P9 (BUCK4)";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_vdd_arm: buck5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <400000>;
+ regulator-name = "VDD_ARM (BUCK5)";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ reg_vdd_1v8: buck6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "VDD_1V8 (BUCK6)";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1800000>;
+ regulator-suspend-min-microvolt = <1800000>;
+ };
+ };
+
+ reg_nvcc_dram: buck7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-name = "NVCC_DRAM_1P1V (BUCK7)";
+ };
+
+ reg_vsnvs: vsnvs {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "NVCC_SNVS_1P8 (VSNVS)";
+ };
+ };
+ };
+
+ sn65dsi83: bridge@2d {
+ compatible = "ti,sn65dsi83";
+ enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sn65dsi83>;
+ reg = <0x2d>;
+ status = "disabled";
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ pagesize = <32>;
+ reg = <0x51>;
+ vcc-supply = <®_vdd_3v3_s>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ reg = <0x52>;
+ };
+};
+
+/* EMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ keep-power-in-suspend;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ non-removable;
+ status = "okay";
+};
+
+/* Watchdog */
+&wdog1 {
+ fsl,ext-reset-output;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x2
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x2
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10
+ >;
+ };
+
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c0
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c0
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1e0
+ MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1e0
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0
+ >;
+ };
+
+ pinctrl_sn65dsi83: sn65dsi83grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x26
+ >;
+ };
+};
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
regulator-name = "buck1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
regulator-always-on;
};
regulator-name = "buck2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
regulator-name = "buck3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-always-on;
};
regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
- cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
cpu-supply = <®_vdd_arm>;
};
+&cpu_alert0 {
+ temperature = <95000>;
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+};
+
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
clock-names = "main_clk";
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
wakeup-source;
status = "disabled";
};
+
+ snvs_lpgpr: snvs-lpgpr {
+ compatible = "fsl,imx8mm-snvs-lpgpr",
+ "fsl,imx7d-snvs-lpgpr";
+ };
};
clk: clock-controller@30380000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
&usbotg1 {
vbus-supply = <®_usb_otg_vbus>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
clock-names = "mclk";
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "fsl,imx-audio-wm8524";
model = "wm8524-audio";
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
};
};
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
"ctx2_rx", "ctx2_tx",
"ctx3_rx", "ctx3_tx";
firmware-name = "imx/easrc/easrc-imx8mn.bin";
- fsl,asrc-rate = <8000>;
+ fsl,asrc-rate = <8000>;
fsl,asrc-format = <2>;
status = "disabled";
};
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
<&clk IMX8MN_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MN_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MN_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+ model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
+ compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-0 {
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+ label = "TA1-GPIO-A";
+ linux,code = <KEY_A>;
+ pinctrl-0 = <&pinctrl_dhcom_a>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-1 {
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+ label = "TA2-GPIO-B";
+ linux,code = <KEY_B>;
+ pinctrl-0 = <&pinctrl_dhcom_b>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-2 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+ label = "TA3-GPIO-C";
+ linux,code = <KEY_C>;
+ pinctrl-0 = <&pinctrl_dhcom_c>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-3 {
+ gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
+ label = "TA4-GPIO-D";
+ linux,code = <KEY_D>;
+ pinctrl-0 = <&pinctrl_dhcom_d>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
+ pinctrl-0 = <&pinctrl_dhcom_e>;
+ pinctrl-names = "default";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+ pinctrl-0 = <&pinctrl_dhcom_f>;
+ pinctrl-names = "default";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
+ pinctrl-0 = <&pinctrl_dhcom_h>;
+ pinctrl-names = "default";
+ };
+
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+ pinctrl-0 = <&pinctrl_dhcom_i>;
+ pinctrl-names = "default";
+ };
+ };
+};
+
+/*
+ * PDK2 carrier board uses SoM with KSZ9131 populated and connected to
+ * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node.
+ */
+/delete-node/ ðphy0f;
+
+/*
+ * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC
+ * ethernet RGMII interface. The SoM is not populated with second FEC PHY.
+ */
+/delete-node/ ðphy1f;
+
+&fec { /* Second ethernet */
+ phy-handle = <ðphypdk>;
+
+ mdio {
+ ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ pinctrl-0 = <&pinctrl_ethphy1>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ max-speed = <100>;
+ reg = <7>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ };
+ };
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ fsl,over-current-active-low;
+};
+
+&iomuxc {
+ /*
+ * GPIO_A,B,C,D are connected to buttons.
+ * GPIO_E,F,H,I are connected to LEDs.
+ * GPIO_M is connected to CLKOUT2.
+ */
+ pinctrl-0 = <&pinctrl_hog_base
+ &pinctrl_dhcom_g &pinctrl_dhcom_j
+ &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_int>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "DH electronics i.MX8M Plus DHCOM SoM";
+ compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ rtc0 = &rv3032;
+ rtc1 = &snvs_rtc;
+ spi0 = &flexspi;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+ reg = <0x0 0x40000000 0 0x08000000>;
+ };
+
+ reg_eth_vio: regulator-eth-vio {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_enet_vio>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "eth_vio";
+ vin-supply = <&buck4>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 19 0>; /* SD2_RESET */
+ off-on-delay-us = <12000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD_3V3_SD";
+ startup-delay-us = <100>;
+ vin-supply = <&buck4>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&eqos { /* First ethernet */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-handle = <ðphy0g>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Up to one of these two PHYs may be populated. */
+ ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+ compatible = "ethernet-phy-id0007.c110",
+ "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reg = <1>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ /* Non-default PHY population option. */
+ status = "disabled";
+ };
+
+ ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
+ compatible = "ethernet-phy-id0022.1642",
+ "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <0>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reg = <5>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ /* Default PHY population option. */
+ status = "okay";
+ };
+ };
+};
+
+&fec { /* Second ethernet */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-handle = <ðphy1f>;
+ phy-mode = "rgmii";
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Up to one PHY may be populated. */
+ ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+ compatible = "ethernet-phy-id0007.c110",
+ "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_ethphy1>;
+ pinctrl-names = "default";
+ reg = <1>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ /* Non-default PHY population option. */
+ status = "disabled";
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi>;
+ status = "okay";
+
+ flash@0 { /* W25Q128JWPIM */
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
+ "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "DHCOM-K", "", "", "", "",
+ "", "", "", "", "DHCOM-INT", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "SOM-HW0", "",
+ "", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+ "SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "SOM-HW1", "", "", "", "",
+ "", "", "", "DHCOM-D", "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "DHCOM-C", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * i.MX 8M Plus Data Sheet for Consumer Products
+ * 3.1.4 Operating ranges
+ * MIMX8ML8CVNKZAB
+ */
+ regulators {
+ buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
+ regulator-compatible = "BUCK1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <3125>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2: BUCK2 { /* VDD_ARM */
+ regulator-compatible = "BUCK2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <3125>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4: BUCK4 { /* VDD_3V3 */
+ regulator-compatible = "BUCK4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5: BUCK5 { /* VDD_1V8 */
+ regulator-compatible = "BUCK5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6: BUCK6 { /* NVCC_DRAM_1V1 */
+ regulator-compatible = "BUCK6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1: LDO1 { /* NVCC_SNVS_1V8 */
+ regulator-compatible = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3: LDO3 { /* VDDA_1V8 */
+ regulator-compatible = "LDO3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 { /* PMIC_LDO4 */
+ regulator-compatible = "LDO4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5: LDO5 { /* NVCC_SD2 */
+ regulator-compatible = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ adc@48 {
+ compatible = "ti,tla2024";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 { /* Voltage over AIN0 and AIN1. */
+ reg = <0>;
+ };
+
+ channel@1 { /* Voltage over AIN0 and AIN3. */
+ reg = <1>;
+ };
+
+ channel@2 { /* Voltage over AIN1 and AIN3. */
+ reg = <2>;
+ };
+
+ channel@3 { /* Voltage over AIN2 and AIN3. */
+ reg = <3>;
+ };
+
+ channel@4 { /* Voltage over AIN0 and GND. */
+ reg = <4>;
+ };
+
+ channel@5 { /* Voltage over AIN1 and GND. */
+ reg = <5>;
+ };
+
+ channel@6 { /* Voltage over AIN2 and GND. */
+ reg = <6>;
+ };
+
+ channel@7 { /* Voltage over AIN3 and GND. */
+ reg = <7>;
+ };
+ };
+
+ touchscreen@49 {
+ compatible = "ti,tsc2004";
+ reg = <0x49>;
+ interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ vio-supply = <&buck4>;
+ };
+
+ eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rv3032: rtc@51 {
+ compatible = "microcrystal,rv3032";
+ reg = <0x51>;
+ interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ };
+
+ eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x53>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c5 { /* HDMI EDID bus */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-1 = <&pinctrl_i2c5_gpio>;
+ scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&uart1 {
+ /* CA53 console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ /* Bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_vbus>;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <&buck4>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 { /* muRata 2AE */
+ reg = <1>;
+ compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+ /*
+ * The "host-wake" interrupt output is by default not
+ * connected to the SoC, but can be connected on to
+ * SoC pin on the carrier board.
+ */
+ reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SD slot */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ vmmc-supply = <&buck4>;
+ vqmmc-supply = <&buck5>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog_base
+ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+ &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+ /* GPIO_M is connected to CLKOUT2 */
+ &pinctrl_dhcom_int>;
+ pinctrl-names = "default";
+
+ pinctrl_dhcom_a: dhcom-a-grp {
+ fsl,pins = <
+ /* ENET_QOS_EVENT0-OUT */
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2
+ >;
+ };
+
+ pinctrl_dhcom_b: dhcom-b-grp {
+ fsl,pins = <
+ /* ENET_QOS_EVENT0-IN */
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2
+ >;
+ };
+
+ pinctrl_dhcom_c: dhcom-c-grp {
+ fsl,pins = <
+ /* GPIO_C */
+ MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2
+ >;
+ };
+
+ pinctrl_dhcom_d: dhcom-d-grp {
+ fsl,pins = <
+ /* GPIO_D */
+ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2
+ >;
+ };
+
+ pinctrl_dhcom_e: dhcom-e-grp {
+ fsl,pins = <
+ /* GPIO_E */
+ MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2
+ >;
+ };
+
+ pinctrl_dhcom_f: dhcom-f-grp {
+ fsl,pins = <
+ /* GPIO_F */
+ MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2
+ >;
+ };
+
+ pinctrl_dhcom_g: dhcom-g-grp {
+ fsl,pins = <
+ /* GPIO_G */
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2
+ >;
+ };
+
+ pinctrl_dhcom_h: dhcom-h-grp {
+ fsl,pins = <
+ /* GPIO_H */
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2
+ >;
+ };
+
+ pinctrl_dhcom_i: dhcom-i-grp {
+ fsl,pins = <
+ /* CSI1_SYNC */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2
+ >;
+ };
+
+ pinctrl_dhcom_j: dhcom-j-grp {
+ fsl,pins = <
+ /* CSIx_#RST */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2
+ >;
+ };
+
+ pinctrl_dhcom_k: dhcom-k-grp {
+ fsl,pins = <
+ /* CSIx_PWDN */
+ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2
+ >;
+ };
+
+ pinctrl_dhcom_l: dhcom-l-grp {
+ fsl,pins = <
+ /* CSI2_SYNC */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2
+ >;
+ };
+
+ pinctrl_dhcom_int: dhcom-int-grp {
+ fsl,pins = <
+ /* INT_HIGHEST_PRIO */
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2
+ >;
+ };
+
+ pinctrl_hog_base: dhcom-hog-base-grp {
+ fsl,pins = <
+ /* GPIOs for memory coding */
+ MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080
+ MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080
+ MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080
+ /* GPIOs for hardware coding */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080
+ MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080
+ >;
+ };
+
+ pinctrl_ecspi1: dhcom-ecspi1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
+ >;
+ };
+
+ pinctrl_ecspi2: dhcom-ecspi2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
+ >;
+ };
+
+ pinctrl_eqos: dhcom-eqos-grp { /* RGMII */
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ >;
+ };
+
+ pinctrl_enet_vio: dhcom-enet-vio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
+ >;
+ };
+
+ pinctrl_ethphy0: dhcom-ethphy0-grp {
+ fsl,pins = <
+ /* ENET1_#RST Reset */
+ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
+ /* ENET1_#INT Interrupt */
+ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22
+ >;
+ };
+
+ pinctrl_ethphy1: dhcom-ethphy1-grp {
+ fsl,pins = <
+ /* ENET1_#RST Reset */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11
+ /* ENET1_#INT Interrupt */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11
+ >;
+ };
+
+ pinctrl_fec: dhcom-fec-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
+ MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f
+ >;
+ };
+
+ pinctrl_flexcan1: dhcom-flexcan1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
+ >;
+ };
+
+ pinctrl_flexcan2: dhcom-flexcan2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154
+ MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154
+ >;
+ };
+
+ pinctrl_flexspi: dhcom-flexspi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
+ MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
+ MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
+ MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
+ MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
+ MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
+ >;
+ };
+
+ pinctrl_hdmi: dhcom-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+
+ pinctrl_i2c3: dhcom-i2c3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84
+ >;
+ };
+
+ pinctrl_i2c4: dhcom-i2c4-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84
+ >;
+ };
+
+ pinctrl_i2c5: dhcom-i2c5-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084
+ MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84
+ MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
+ >;
+ };
+
+ pinctrl_pmic: dhcom-pmic-grp {
+ fsl,pins = <
+ /* PMIC_nINT */
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
+ >;
+ };
+
+ pinctrl_pwm1: dhcom-pwm1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6
+ >;
+ };
+
+ pinctrl_rtc: dhcom-rtc-grp {
+ fsl,pins = <
+ /* RTC_#INT Interrupt */
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080
+ >;
+ };
+
+ pinctrl_touch: dhcom-touch-grp {
+ fsl,pins = <
+ /* #TOUCH_INT */
+ MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080
+ >;
+ };
+
+ pinctrl_uart1: dhcom-uart1-grp {
+ fsl,pins = <
+ /* Console UART */
+ MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49
+ MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49
+ MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49
+ MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49
+ >;
+ };
+
+ pinctrl_uart2: dhcom-uart2-grp {
+ fsl,pins = <
+ /* Bluetooth UART */
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49
+ MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
+ >;
+ };
+
+ pinctrl_uart3: dhcom-uart3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49
+ MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49
+ MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49
+ MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49
+ >;
+ };
+
+ pinctrl_uart4: dhcom-uart4-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
+ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usb0_vbus: dhcom-usb0-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
+ >;
+ };
+
+ pinctrl_usb1_vbus: dhcom-usb1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6
+ MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80
+ >;
+ };
+
+ pinctrl_usdhc1: dhcom-usdhc1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ /* BT_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
+ /* WL_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ /* BT_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
+ /* WL_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ /* BT_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
+ /* WL_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
+ >;
+ };
+
+ pinctrl_usdhc2: dhcom-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080
+ >;
+ };
+
+ pinctrl_usdhc3: dhcom-usdhc3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
+ >;
+ };
+
+ pinctrl_wdog: dhcom-wdog-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
};
};
-&flexcan1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_can1_stby>;
- status = "okay";
+&A53_0 {
+ cpu-supply = <®_arm>;
};
-&flexcan2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_can2_stby>;
- status = "disabled";/* can2 pin conflict with pdm */
+&A53_1 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm>;
};
&eqos {
};
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_stby>;
+ status = "disabled";/* can2 pin conflict with pdm */
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
regulator-ramp-delay = <3125>;
};
- BUCK2 {
+ reg_arm: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+ model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
+ compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>;
+ };
+
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc1;
+ rtc0 = &pcf85063;
+ rtc1 = &snvs_rtc;
+ spi0 = &flexspi;
+ spi1 = &ecspi1;
+ spi2 = &ecspi2;
+ spi3 = &ecspi3;
+ };
+
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm2 0 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_vcc_12v0>;
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobutton>;
+ autorepeat;
+
+ switch-1 {
+ label = "S12";
+ linux,code = <BTN_0>;
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-2 {
+ label = "S13";
+ linux,code = <BTN_1>;
+ gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <0>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ display: display {
+ /*
+ * Display is not fixed, so compatible has to be added from
+ * DT overlay
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvdsdisplay>;
+ power-supply = <®_vcc_3v3>;
+ enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight_lvds>;
+ status = "disabled";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+
+ reg_vcc_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg12v0>;
+ regulator-name = "VCC_12V0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vcc_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ocram: ocram@900000 {
+ no-map;
+ reg = <0 0x900000 0 0x70000>;
+ };
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0 0x38000000>;
+ alloc-ranges = <0 0x40000000 0 0xB0000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ adc: adc@0 {
+ reg = <0>;
+ compatible = "microchip,mcp3202";
+ /* 100 ksps * 18 */
+ spi-max-frequency = <1800000>;
+ vref-supply = <®_vcc_3v3>;
+ #io-channel-cells = <1>;
+ };
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy3>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio4>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+
+ gpio-line-names = "GPO1", "GPO0", "", "GPO3",
+ "", "", "GPO2", "GPI0",
+ "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
+ "OTG_PWR", "", "GPI2", "GPI3",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hoggpio2>;
+
+ gpio-line-names = "", "", "", "",
+ "", "", "VCC12V_EN", "PERST#",
+ "", "", "CLKREQ#", "PEWAKE#",
+ "USDHC2_CD", "", "", "",
+ "", "", "", "V_SD3V3_EN",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+
+ perst-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ line-name = "PERST#";
+ };
+
+ clkreq-hog {
+ gpio-hog;
+ gpios = <10 0>;
+ input;
+ line-name = "CLKREQ#";
+ };
+
+ pewake-hog {
+ gpio-hog;
+ gpios = <11 0>;
+ input;
+ line-name = "PEWAKE#";
+ };
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "LVDS0_RESET#", "",
+ "", "", "", "LVDS0_BLT_EN",
+ "LVDS0_PWR_EN", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+
+ gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "DP_IRQ", "DSI_EN",
+ "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+ "", "", "", "FAN_PWR",
+ "RTC_EVENT#", "CODEC_RST#", "", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "LED2",
+ "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
+ "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
+ "", "ECSPI2_SS0", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
+ "", "", "", "";
+};
+
+&i2c2 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97_1c: temperature-sensor-eeprom@1c {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ at24c02_54: eeprom@54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_vcc_3v3>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c6 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c6>;
+ pinctrl-1 = <&pinctrl_i2c6_gpio>;
+ scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&pcf85063 {
+ /* RTC_EVENT# is connected on MBa8MPxL */
+ interrupt-parent = <&gpio4>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart4 {
+ /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>,
+ <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>,
+ <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>;
+ };
+
+ /* only on X57, primary used as CSI0 control signals */
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>;
+ };
+
+ /* on X63 and optionally on X57, can also be used as CSI1 control signals */
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>,
+ <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>,
+ <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>,
+ <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>,
+ <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>,
+ <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>,
+ <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>,
+ <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>,
+ <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>,
+ <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>,
+ <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>,
+ <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>,
+ <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>,
+ <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>,
+ <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>;
+ };
+
+ pinctrl_eqos_event: eqosevtgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>,
+ <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>,
+ <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>,
+ <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>;
+ };
+
+ pinctrl_fec_event: fecevtgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>;
+ };
+
+ pinctrl_fec_phyalt: fecphyaltgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>,
+ <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>;
+ };
+
+ pinctrl_gpiobutton: gpiobuttongrp {
+ fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>,
+ <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>,
+ <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>,
+ <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>,
+ <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>,
+ <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>,
+ <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>,
+ <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>;
+ };
+
+ pinctrl_hoggpio2: hoggpio2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>,
+ <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>,
+ <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>,
+ <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>,
+ <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>;
+ };
+
+ pinctrl_i2c6: i2c6grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c6_gpio: i2c6-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>,
+ <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>;
+ };
+
+ pinctrl_lvdsdisplay: lvdsdisplaygrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */
+ };
+
+ /* LVDS Backlight */
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>;
+ };
+
+ /* FAN */
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>;
+ };
+
+ pinctrl_reg12v0: reg12v0grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */
+ };
+
+ /* X61 */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>;
+ };
+
+ /* X61 */
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>,
+ <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
+ compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ /* identical to buck4_reg, but should never change */
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* e-MMC IO, needed for HS modes */
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97: temperature-sensor-eeprom@1b {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ };
+
+ pmic: pmic@25 {
+ reg = <0x25>;
+ compatible = "nxp,pca9450c";
+
+ /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+ pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ /* V_0V85_SOC: 0.85 .. 0.95 */
+ buck1_reg: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* VDD_ARM */
+ buck2_reg: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* VCC3V3 -> VMMC, ... must not be changed */
+ buck4_reg: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+ buck5_reg: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V1 -> RAM, ... must not be changed */
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_SNVS */
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_ANA */
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* unused */
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* VCC SD IO - switched using SD2 VSELECT */
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ };
+
+ at24c02: eeprom@53 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ read-only;
+ reg = <0x53>;
+ pagesize = <16>;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ m24c64: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>,
+ <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>,
+ <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>;
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ button-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
};
};
+&cpu_alert0 {
+ temperature = <95000>;
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+};
+
/* Verdin SPI_1 */
&ecspi1 {
#address-cells = <1>;
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mp-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
<&clk IMX8MP_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MP_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&clk IMX8MP_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MP_CLK_NOC>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200M {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-1000M {
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+ };
+ };
+
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8524-audio";
status = "okay";
};
+&sai3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_spdif1: spdif1grp {
fsl,pins = <
MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- btn1 {
+ button-1 {
label = "VOL_UP";
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
- btn2 {
+ button-2 {
label = "VOL_DOWN";
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEDOWN>;
};
- wwan-wake {
+ button-3 {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keys>;
- vol-down {
+ key-vol-down {
label = "VOL_DOWN";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
wakeup-source;
};
- vol-up {
+ key-vol-up {
label = "VOL_UP";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ button-power {
label = "Power Button";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_arm_dram>;
reg = <0x60>;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>;
reg = <0x60>;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
status = "okay";
usbhub: usbhub@2c {
- compatible ="microchip,usb2513b";
+ compatible = "microchip,usb2513b";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
reg = <0x2c>;
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mq-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
nvmem-cells = <&imx8mq_uid>;
nvmem-cell-names = "soc_unique_id";
- bus@30000000 { /* AIPS1 */
+ aips1: bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
<0x00030005 0x00000053>,
<0x00030006 0x0000005f>,
<0x00030007 0x00000071>;
- #thermal-sensor-cells = <1>;
+ #thermal-sensor-cells = <1>;
};
wdog1: watchdog@30280000 {
};
};
- bus@30400000 { /* AIPS2 */
+ aips2: bus@30400000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
};
};
- bus@30800000 { /* AIPS3 */
+ aips3: bus@30800000 { /* AIPS3 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
};
};
- bus@32c00000 { /* AIPS4 */
+ aips4: bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
};
- scu {
+ system-controller {
compatible = "fsl,imx-scu";
mbox-names = "tx0",
"rx0",
&lsio_mu1 1 0
&lsio_mu1 3 3>;
- pd: imx8qx-pd {
+ pd: power-controller {
compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd";
#power-domain-cells = <1>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- wakeup {
+ key-wakeup {
label = "Wake-Up";
gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
/* Colibri UART_B */
&lpuart0 {
- status= "okay";
+ status = "okay";
};
/* Colibri UART_C */
&lpuart2 {
- status= "okay";
+ status = "okay";
};
/* Colibri UART_A */
&lpuart3 {
- status= "okay";
+ status = "okay";
};
/* Colibri FastEthernet */
method = "smc";
};
- scu {
+ system-controller {
compatible = "fsl,imx-scu";
mbox-names = "tx0",
"rx0",
&lsio_mu1 1 0
&lsio_mu1 3 3>;
- pd: imx8qx-pd {
+ pd: power-controller {
compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
#power-domain-cells = <1>;
};
clk: clock-controller {
- compatible = "fsl,imx8qxp-clk";
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <2>;
- clocks = <&xtal32k &xtal24m>;
- clock-names = "xtal_32KHz", "xtal_24Mhz";
};
iomuxc: pinctrl {
compatible = "fsl,imx8qxp-iomuxc";
};
- ocotp: imx8qx-ocotp {
+ ocotp: ocotp {
compatible = "fsl,imx8qxp-scu-ocotp";
#address-cells = <1>;
#size-cells = <1>;
};
- scu_key: scu-key {
+ scu_key: keys {
compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
linux,keycodes = <KEY_POWER>;
status = "disabled";
};
thermal_zones: thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
};
};
- soc@0 {
+ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
};
- gpioe: gpio@2d000000 {
+ gpioe: gpio@2d000080 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
gpio-controller;
gpio-ranges = <&iomuxc1 0 32 24>;
};
- gpiof: gpio@2d010000 {
+ gpiof: gpio@2d010080 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
gpio-controller;
};
};
- gpiod: gpio@2e200000 {
+ gpiod: gpio@2e200080 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
gpio-controller;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/ {
+ model = "NXP i.MX93 11X11 EVK board";
+ compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&lpuart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+ no-sdio;
+ no-mmc;
+};
+
+&iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+};
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef __DTS_IMX93_PINFUNC_H
+#define __DTS_IMX93_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03D8 0x0 0x0
+#define MX93_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01B0 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDI__CAN2_TX 0x0000 0x01B0 0x0000 0x3 0x0
+#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01B0 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0430 0x6 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03DC 0x0 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01B4 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01B4 0x0000 0x6 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03D4 0x0 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01B8 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01B8 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x042C 0x6 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x01BC 0x0000 0x0 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000C 0x01BC 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x01BC 0x0364 0x3 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000C 0x01BC 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000C 0x01BC 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x0434 0x6 0x0
+#define MX93_PAD_GPIO_IO00__GPIO2_IO00 0x0010 0x01C0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03E4 0x11 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01C0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01C0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01C0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x0434 0x5 0x1
+#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03EC 0x16 0x0
+#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00 0x0010 0x01C0 0x036C 0x7 0x0
+#define MX93_PAD_GPIO_IO01__GPIO2_IO01 0x0014 0x01C4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E0 0x11 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00 0x0014 0x01C4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01C4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01C4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0430 0x5 0x1
+#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03E8 0x16 0x0
+#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01 0x0014 0x01C4 0x0370 0x7 0x0
+#define MX93_PAD_GPIO_IO02__GPIO2_IO02 0x0018 0x01C8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01C8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01C8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01C8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x042C 0x5 0x1
+#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03F4 0x16 0x0
+#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02 0x0018 0x01C8 0x0374 0x7 0x0
+#define MX93_PAD_GPIO_IO03__GPIO2_IO03 0x001C 0x01CC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001C 0x01CC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001C 0x01CC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x01CC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x01CC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F0 0x16 0x0
+#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03 0x001C 0x01CC 0x0378 0x7 0x0
+#define MX93_PAD_GPIO_IO04__GPIO2_IO04 0x0020 0x01D0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01D0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01D0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x0020 0x01D0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01D0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01D0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03F4 0x16 0x1
+#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04 0x0020 0x01D0 0x037C 0x7 0x0
+#define MX93_PAD_GPIO_IO05__GPIO2_IO05 0x0024 0x01D4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01D4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0438 0x2 0x0
+#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x0024 0x01D4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01D4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01D4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F0 0x16 0x1
+#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05 0x0024 0x01D4 0x0380 0x7 0x0
+#define MX93_PAD_GPIO_IO06__GPIO2_IO06 0x0028 0x01D8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01D8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x043C 0x2 0x0
+#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x0028 0x01D8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01D8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01D8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x03FC 0x16 0x0
+#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06 0x0028 0x01D8 0x0384 0x7 0x0
+#define MX93_PAD_GPIO_IO07__GPIO2_IO07 0x002C 0x01DC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x01DC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01 0x002C 0x01DC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x002C 0x01DC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x01DC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x01DC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x03F8 0x16 0x0
+#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07 0x002C 0x01DC 0x0388 0x7 0x0
+#define MX93_PAD_GPIO_IO08__GPIO2_IO08 0x0030 0x01E0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01E0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02 0x0030 0x01E0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x0030 0x01E0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01E0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01E0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x03FC 0x16 0x1
+#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08 0x0030 0x01E0 0x038C 0x7 0x0
+#define MX93_PAD_GPIO_IO09__GPIO2_IO09 0x0034 0x01E4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01E4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03 0x0034 0x01E4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x0034 0x01E4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01E4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01E4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x03F8 0x16 0x1
+#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09 0x0034 0x01E4 0x0390 0x7 0x0
+#define MX93_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01E8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01E8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04 0x0038 0x01E8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x0038 0x01E8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01E8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01E8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x0404 0x16 0x0
+#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01E8 0x0394 0x7 0x0
+#define MX93_PAD_GPIO_IO11__GPIO2_IO11 0x003C 0x01EC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x01EC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05 0x003C 0x01EC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x003C 0x01EC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x01EC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x01EC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0400 0x16 0x0
+#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003C 0x01EC 0x0398 0x7 0x0
+#define MX93_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01F0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01F0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0440 0x2 0x0
+#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x0040 0x01F0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01F0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01F0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x0404 0x16 0x1
+#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0450 0x7 0x0
+#define MX93_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01F4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01F4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x0444 0x2 0x0
+#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x0044 0x01F4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01F4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01F4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0400 0x16 0x1
+#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01F4 0x039C 0x7 0x0
+#define MX93_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01F8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x041C 0x1 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06 0x0048 0x01F8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01F8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01F8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01F8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0428 0x6 0x0
+#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01F8 0x03A0 0x7 0x0
+#define MX93_PAD_GPIO_IO15__GPIO2_IO15 0x004C 0x01FC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0418 0x1 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07 0x004C 0x01FC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004C 0x01FC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x01FC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x01FC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x0424 0x6 0x0
+#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004C 0x01FC 0x03A4 0x7 0x0
+#define MX93_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0440 0x2 0x1
+#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x0414 0x4 0x0
+#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0420 0x6 0x0
+#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03A8 0x7 0x0
+#define MX93_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08 0x0054 0x0204 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03AC 0x7 0x0
+#define MX93_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x044C 0x1 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09 0x0058 0x0208 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03B0 0x7 0x0
+#define MX93_PAD_GPIO_IO19__GPIO2_IO19 0x005C 0x020C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0450 0x1 0x1
+#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x0444 0x2 0x1
+#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005C 0x020C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x020C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x020C 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO19__TPM6_CH2 0x005C 0x020C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x005C 0x020C 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x0060 0x0210 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0438 0x2 0x1
+#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03B4 0x7 0x0
+#define MX93_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00 0x0064 0x0214 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x044C 0x7 0x1
+#define MX93_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0458 0x1 0x0
+#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x0454 0x2 0x0
+#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03EC 0x16 0x1
+#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03B8 0x7 0x0
+#define MX93_PAD_GPIO_IO23__GPIO2_IO23 0x006C 0x021C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x045C 0x1 0x0
+#define MX93_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x021C 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006C 0x021C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x021C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03E8 0x16 0x1
+#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006C 0x021C 0x03BC 0x7 0x0
+#define MX93_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0460 0x1 0x0
+#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03C0 0x7 0x0
+#define MX93_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x0464 0x1 0x0
+#define MX93_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03D4 0x5 0x1
+#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03C4 0x7 0x0
+#define MX93_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0468 0x1 0x0
+#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x043C 0x2 0x1
+#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03D8 0x5 0x1
+#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO27__GPIO2_IO27 0x007C 0x022C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x046C 0x1 0x0
+#define MX93_PAD_GPIO_IO27__CAN2_RX 0x007C 0x022C 0x0364 0x2 0x1
+#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007C 0x022C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x022C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03DC 0x5 0x1
+#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x022C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007C 0x022C 0x03C8 0x7 0x0
+#define MX93_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03E4 0x11 0x1
+#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E0 0x11 0x1
+#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x7 0x0
+#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x008C 0x023C 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008C 0x023C 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008C 0x023C 0x03C8 0x4 0x1
+#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x0098 0x0248 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03CC 0x2 0x0
+#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00 0x0098 0x0248 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDC__GPIO4_IO00 0x0098 0x0248 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009C 0x024C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009C 0x024C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D0 0x2 0x0
+#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009C 0x024C 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01 0x009C 0x024C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x009C 0x024C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00A0 0x0250 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD3__CAN2_TX 0x00A0 0x0250 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00A0 0x0250 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02 0x00A0 0x0250 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD3__GPIO4_IO02 0x00A0 0x0250 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00A4 0x0254 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x00A4 0x0254 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD2__CAN2_RX 0x00A4 0x0254 0x0364 0x2 0x2
+#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00A4 0x0254 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03 0x00A4 0x0254 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD2__GPIO4_IO03 0x00A4 0x0254 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x00A8 0x0258 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B 0x00A8 0x0258 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR 0x00A8 0x0258 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00A8 0x0258 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04 0x00A8 0x0258 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD1__GPIO4_IO04 0x00A8 0x0258 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR_B 0x00A8 0x0258 0x0000 0x6 0x0
+#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00AC 0x025C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x041C 0x1 0x1
+#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05 0x00AC 0x025C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD0__GPIO4_IO05 0x00AC 0x025C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00B0 0x0260 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00B0 0x0260 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06 0x00B0 0x0260 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x00B0 0x0260 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00B4 0x0264 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00B4 0x0264 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07 0x00B4 0x0264 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TXC__GPIO4_IO07 0x00B4 0x0264 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00B8 0x0268 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00B8 0x0268 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00B8 0x0268 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08 0x00B8 0x0268 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x00B8 0x0268 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x00BC 0x026C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00BC 0x026C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09 0x00BC 0x026C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RXC__GPIO4_IO09 0x00BC 0x026C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00C0 0x0270 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0418 0x1 0x1
+#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00C0 0x0270 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD0__GPIO4_IO10 0x00C0 0x0270 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00C4 0x0274 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x0414 0x1 0x1
+#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0408 0x3 0x0
+#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00C4 0x0274 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD1__GPIO4_IO11 0x00C4 0x0274 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00C8 0x0278 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x040C 0x3 0x0
+#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00C8 0x0278 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD2__GPIO4_IO12 0x00C8 0x0278 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00CC 0x027C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00CC 0x027C 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0410 0x3 0x0
+#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00CC 0x027C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD3__GPIO4_IO13 0x00CC 0x027C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDC__ENET1_MDC 0x00D0 0x0280 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B 0x00D0 0x0280 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00D0 0x0280 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00D0 0x0280 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDC__GPIO4_IO14 0x00D0 0x0280 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x00D4 0x0284 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00D4 0x0284 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00D4 0x0284 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00D4 0x0284 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x00D4 0x0284 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00 0x00D8 0x0288 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00D8 0x0288 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD3__GPIO4_IO16 0x00D8 0x0288 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x00D8 0x0288 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x00DC 0x028C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x00DC 0x028C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01 0x00DC 0x028C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00DC 0x028C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD2__GPIO4_IO17 0x00DC 0x028C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x00E0 0x0290 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B 0x00E0 0x0290 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02 0x00E0 0x0290 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00E0 0x0290 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD1__GPIO4_IO18 0x00E0 0x0290 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x00E4 0x0294 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0428 0x1 0x1
+#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03 0x00E4 0x0294 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00E4 0x0294 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD0__GPIO4_IO19 0x00E4 0x0294 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x00E8 0x0298 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00E8 0x0298 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00E8 0x0298 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00E8 0x0298 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00E8 0x0298 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x00EC 0x029C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_TX_ER 0x00EC 0x029C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00EC 0x029C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00EC 0x029C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TXC__GPIO4_IO21 0x00EC 0x029C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x00F0 0x02A0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00F0 0x02A0 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00 0x00F0 0x02A0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00F0 0x02A0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00F0 0x02A0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x00F4 0x02A4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x00F4 0x02A4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01 0x00F4 0x02A4 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00F4 0x02A4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RXC__GPIO4_IO23 0x00F4 0x02A4 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x00F8 0x02A8 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x0424 0x1 0x1
+#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02 0x00F8 0x02A8 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00F8 0x02A8 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD0__GPIO4_IO24 0x00F8 0x02A8 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x00FC 0x02AC 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x0454 0x1 0x1
+#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03 0x00FC 0x02AC 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00FC 0x02AC 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD1__GPIO4_IO25 0x00FC 0x02AC 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x0100 0x02B0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0420 0x1 0x1
+#define MX93_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02B0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02B0 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02B0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02B0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x0104 0x02B4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02B4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x0454 0x2 0x2
+#define MX93_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02B4 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02B4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02B4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08 0x0108 0x02B8 0x038C 0x4 0x1
+#define MX93_PAD_SD1_CLK__GPIO3_IO08 0x0108 0x02B8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02B8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__USDHC1_CMD 0x010C 0x02BC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09 0x010C 0x02BC 0x0390 0x4 0x1
+#define MX93_PAD_SD1_CMD__GPIO3_IO09 0x010C 0x02BC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02C0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02C0 0x0394 0x4 0x1
+#define MX93_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02C0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02C4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02C4 0x0398 0x4 0x1
+#define MX93_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02C4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02C4 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02C8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02C8 0x0000 0x4 0x0
+#define MX93_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02C8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02C8 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x011C 0x02CC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011C 0x02CC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011C 0x02CC 0x039C 0x4 0x1
+#define MX93_PAD_SD1_DATA3__GPIO3_IO13 0x011C 0x02CC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02D0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04 0x0120 0x02D0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02D0 0x03A0 0x4 0x1
+#define MX93_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02D0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02D4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05 0x0124 0x02D4 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02D4 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02D4 0x03A4 0x4 0x1
+#define MX93_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02D4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02D8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06 0x0128 0x02D8 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02D8 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02D8 0x03A8 0x4 0x1
+#define MX93_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02D8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x012C 0x02DC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07 0x012C 0x02DC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_WP 0x012C 0x02DC 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012C 0x02DC 0x03AC 0x4 0x1
+#define MX93_PAD_SD1_DATA7__GPIO3_IO17 0x012C 0x02DC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02E0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02E0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02E0 0x03B0 0x4 0x1
+#define MX93_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02E0 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02E4 0x0000 0x0 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02E4 0x0000 0x1 0x0
+#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0410 0x2 0x1
+#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02E4 0x0000 0x4 0x0
+#define MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02E4 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02E4 0x0368 0x6 0x0
+#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0458 0x0 0x1
+#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02E8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02E8 0x03B4 0x4 0x1
+#define MX93_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02E8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x045C 0x0 0x1
+#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013C 0x02EC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013C 0x02EC 0x0000 0x4 0x0
+#define MX93_PAD_SD3_CMD__GPIO3_IO21 0x013C 0x02EC 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0460 0x0 0x1
+#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x0140 0x02F0 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02F0 0x03B8 0x4 0x1
+#define MX93_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02F0 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x0464 0x0 0x1
+#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x0144 0x02F4 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02F4 0x03BC 0x4 0x1
+#define MX93_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02F4 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0468 0x0 0x1
+#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x0148 0x02F8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02F8 0x03C0 0x4 0x1
+#define MX93_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02F8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x046C 0x0 0x1
+#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x014C 0x02FC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014C 0x02FC 0x03C4 0x4 0x1
+#define MX93_PAD_SD3_DATA3__GPIO3_IO25 0x014C 0x02FC 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03CC 0x2 0x1
+#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00 0x0150 0x0300 0x036C 0x4 0x1
+#define MX93_PAD_SD2_CD_B__GPIO3_IO00 0x0150 0x0300 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D0 0x2 0x1
+#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01 0x0154 0x0304 0x0370 0x4 0x1
+#define MX93_PAD_SD2_CLK__GPIO3_IO01 0x0154 0x0304 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x6 0x0
+#define MX93_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x2 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x3 0x0
+#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02 0x0158 0x0308 0x0374 0x4 0x1
+#define MX93_PAD_SD2_CMD__GPIO3_IO02 0x0158 0x0308 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x015C 0x030C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT 0x015C 0x030C 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA0__CAN2_TX 0x015C 0x030C 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03 0x015C 0x030C 0x0378 0x4 0x1
+#define MX93_PAD_SD2_DATA0__GPIO3_IO03 0x015C 0x030C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015C 0x030C 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x2 0x3
+#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04 0x0160 0x0310 0x037C 0x4 0x1
+#define MX93_PAD_SD2_DATA1__GPIO3_IO04 0x0160 0x0310 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05 0x0164 0x0314 0x0380 0x4 0x1
+#define MX93_PAD_SD2_DATA2__GPIO3_IO05 0x0164 0x0314 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0408 0x1 0x1
+#define MX93_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06 0x0168 0x0318 0x0384 0x4 0x1
+#define MX93_PAD_SD2_DATA3__GPIO3_IO06 0x0168 0x0318 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x6 0x0
+#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016C 0x031C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x040C 0x1 0x1
+#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07 0x016C 0x031C 0x0388 0x4 0x1
+#define MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x016C 0x031C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016C 0x031C 0x0000 0x6 0x0
+#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SCL__GPIO1_IO00 0x0170 0x0320 0x0000 0x5 0x0
+#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SDA__GPIO1_IO01 0x0174 0x0324 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x1 0x0
+#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SCL__GPIO1_IO02 0x0178 0x0328 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x6 0x0
+#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B 0x017C 0x032C 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SDA__TPM2_CH3 0x017C 0x032C 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017C 0x032C 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SDA__GPIO1_IO03 0x017C 0x032C 0x0000 0x5 0x0
+#define MX93_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0000 0x0 0x0
+#define MX93_PAD_UART1_RXD__S400_UART_RX 0x0180 0x0330 0x0000 0x1 0x0
+#define MX93_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0000 0x2 0x0
+#define MX93_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x3 0x0
+#define MX93_PAD_UART1_RXD__GPIO1_IO04 0x0180 0x0330 0x0000 0x5 0x0
+#define MX93_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x0000 0x0 0x0
+#define MX93_PAD_UART1_TXD__S400_UART_TX 0x0184 0x0334 0x0000 0x1 0x0
+#define MX93_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0000 0x2 0x0
+#define MX93_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x3 0x0
+#define MX93_PAD_UART1_TXD__GPIO1_IO05 0x0184 0x0334 0x0000 0x5 0x0
+#define MX93_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0000 0x0 0x0
+#define MX93_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0000 0x1 0x0
+#define MX93_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0000 0x2 0x0
+#define MX93_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x3 0x0
+#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0448 0x4 0x0
+#define MX93_PAD_UART2_RXD__GPIO1_IO06 0x0188 0x0338 0x0000 0x5 0x0
+#define MX93_PAD_UART2_TXD__LPUART2_TX 0x018C 0x033C 0x0000 0x0 0x0
+#define MX93_PAD_UART2_TXD__LPUART1_RTS_B 0x018C 0x033C 0x0000 0x1 0x0
+#define MX93_PAD_UART2_TXD__LPSPI2_SCK 0x018C 0x033C 0x0000 0x2 0x0
+#define MX93_PAD_UART2_TXD__TPM1_CH3 0x018C 0x033C 0x0000 0x3 0x0
+#define MX93_PAD_UART2_TXD__GPIO1_IO07 0x018C 0x033C 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x0 0x0
+#define MX93_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x1 0x0
+#define MX93_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x4 0x0
+#define MX93_PAD_PDM_CLK__GPIO1_IO08 0x0190 0x0340 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0438 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x0194 0x0344 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x043C 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x0198 0x0348 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x6 0x1
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019C 0x034C 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01 0x019C 0x034C 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019C 0x034C 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019C 0x034C 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXFS__MQS1_LEFT 0x019C 0x034C 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x019C 0x034C 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01A0 0x0350 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B 0x01A0 0x0350 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x01A0 0x0350 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B 0x01A0 0x0350 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXC__CAN1_RX 0x01A0 0x0350 0x0360 0x4 0x1
+#define MX93_PAD_SAI1_TXC__GPIO1_IO12 0x01A0 0x0350 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x01A4 0x0354 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01A4 0x0354 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x01A4 0x0354 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01A4 0x0354 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXD0__CAN1_TX 0x01A4 0x0354 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x01A4 0x0354 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x01A8 0x0358 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0448 0x1 0x1
+#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01A8 0x0358 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01A8 0x0358 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT 0x01A8 0x0358 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x01A8 0x0358 0x0000 0x5 0x0
+#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01AC 0x035C 0x0000 0x0 0x0
+#define MX93_PAD_WDOG_ANY__GPIO1_IO15 0x01AC 0x035C 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX93_PINFUNC_H */
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ serial7 = &lpuart8;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ A55_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ };
+
+ A55_1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ };
+
+ };
+
+ osc_32k: clock-osc-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc_32k";
+ };
+
+ osc_24m: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc_24m";
+ };
+
+ clk_ext1: clock-ext1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext1";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,no-tick-in-suspend;
+ interrupt-parent = <&gic>;
+ };
+
+ gic: interrupt-controller@48000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x48000000 0 0x10000>,
+ <0 0x48040000 0 0xc0000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x80000000>,
+ <0x28000000 0x0 0x28000000 0x10000000>;
+
+ aips1: bus@44000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x44000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mu1: mailbox@44230000 {
+ compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+ reg = <0x44230000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ system_counter: timer@44290000 {
+ compatible = "nxp,sysctr-timer";
+ reg = <0x44290000 0x30000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc_24m>;
+ clock-names = "per";
+ };
+
+ lpuart1: serial@44380000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x44380000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart2: serial@44390000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x44390000 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ iomuxc: pinctrl@443c0000 {
+ compatible = "fsl,imx93-iomuxc";
+ reg = <0x443c0000 0x10000>;
+ status = "okay";
+ };
+
+ clk: clock-controller@44450000 {
+ compatible = "fsl,imx93-ccm";
+ reg = <0x44450000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1";
+ status = "okay";
+ };
+
+ anatop: anatop@44480000 {
+ compatible = "fsl,imx93-anatop", "syscon";
+ reg = <0x44480000 0x10000>;
+ };
+ };
+
+ aips2: bus@42000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x42000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mu2: mailbox@42440000 {
+ compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+ reg = <0x42440000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@42570000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42570000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart4: serial@42580000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42580000 0x1000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@42590000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42590000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart6: serial@425a0000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x425a0000 0x1000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart7: serial@42690000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42690000 0x1000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart8: serial@426a0000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x426a0000 0x1000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+ };
+
+ aips3: bus@42800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x42800000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usdhc1: mmc@42850000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x42850000 0x10000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_USDHC1_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <8>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@42860000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x42860000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_USDHC2_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ usdhc3: mmc@428b0000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x428b0000 0x10000>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_USDHC3_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+ };
+
+ gpio2: gpio@43810080 {
+ compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x43810080 0x1000>, <0x43810040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 32 32>;
+ };
+
+ gpio3: gpio@43820080 {
+ compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x43820080 0x1000>, <0x43820040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 64 32>;
+ };
+
+ gpio4: gpio@43830080 {
+ compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x43830080 0x1000>, <0x43830040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 96 32>;
+ };
+
+ gpio1: gpio@47400080 {
+ compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x47400080 0x1000>, <0x47400040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 0 32>;
+ };
+ };
+};
};
chosen {
- // bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200";
stdout-path = &uart3;
};
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
- switch1 {
+ switch-1 {
label = "switch1";
linux,code = <BTN_0>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- btn2: switch2 {
+ btn2: switch-2 {
label = "switch2";
linux,code = <BTN_1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch3 {
+ switch-3 {
label = "switch3";
linux,code = <BTN_2>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
-/* UART4 is assigned to Cortex-M4 */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
ramoops@32000000 {
compatible = "ramoops";
reg = <0x0 0x32000000 0x0 0x00100000>;
- record-size = <0x00020000>;
- console-size = <0x00020000>;
- ftrace-size = <0x00020000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
};
};
compatible = "syscon-reboot-mode";
offset = <0x0>;
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
dma-names = "rx", "tx";
- dmas = <&dma0 2 &dma0 3>;
+ dmas = <&dma0 2 &dma0 3>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
dma-names = "rx", "tx";
- dmas = <&dma0 4 &dma0 5>;
+ dmas = <&dma0 4 &dma0 5>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
dma-names = "rx", "tx";
- dmas = <&dma0 6 &dma0 7>;
+ dmas = <&dma0 6 &dma0 7>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
dma-names = "rx", "tx";
- dmas = <&dma0 8 &dma0 9>;
+ dmas = <&dma0 8 &dma0 9>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+ gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
ramoops@21f00000 {
compatible = "ramoops";
reg = <0x0 0x21f00000 0x0 0x00100000>;
- record-size = <0x00020000>;
- console-size = <0x00020000>;
- ftrace-size = <0x00020000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
};
/* global autoconfigured region for contiguous allocations */
compatible = "syscon-reboot-mode";
offset = <0x0>;
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pwrbutton {
+ pwr-button {
label = "Power Button";
gpios = <&porta 8 GPIO_ACTIVE_LOW>;
linux,code = <116>;
port@1 {
reg = <1>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
port-rst-offset = <1>;
port-mode-offset = <1>;
media-type = "fiber";
port@4 {
reg = <4>;
phy-handle = <&phy0>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
port-rst-offset = <4>;
port-mode-offset = <2>;
media-type = "copper";
port@5 {
reg = <5>;
phy-handle = <&phy1>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
port-rst-offset = <5>;
port-mode-offset = <3>;
media-type = "copper";
port@1 {
reg = <1>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
cpld-syscon = <&dsa_cpld 0x4>;
port-rst-offset = <1>;
port-mode-offset = <1>;
port@4 {
reg = <4>;
phy-handle = <&phy0>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
port-rst-offset = <4>;
port-mode-offset = <2>;
mc-mac-mask = [ff f0 00 00 00 00];
port@5 {
reg = <5>;
phy-handle = <&phy1>;
- serdes-syscon= <&serdes_ctrl>;
+ serdes-syscon = <&serdes_ctrl>;
port-rst-offset = <5>;
port-mode-offset = <3>;
mc-mac-mask = [ff f0 00 00 00 00];
sdramedac {
compatible = "altr,sdram-edac-s10";
altr,sdr-syscon = <&sdr>;
- interrupts = <16 4>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
};
ocram-ecc@ff8cc000 {
"altr,socfpga-a10-ocram-ecc";
reg = <0xff8cc000 0x100>;
altr,ecc-parent = <&ocram>;
- interrupts = <1 4>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
usb0-ecc@ff8c4000 {
"altr,socfpga-usb-ecc";
reg = <0xff8c4000 0x100>;
altr,ecc-parent = <&usb0>;
- interrupts = <2 4>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
emac0-rx-ecc@ff8c0000 {
"altr,socfpga-eth-mac-ecc";
reg = <0xff8c0000 0x100>;
altr,ecc-parent = <&gmac0>;
- interrupts = <4 4>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
emac0-tx-ecc@ff8c0400 {
"altr,socfpga-eth-mac-ecc";
reg = <0xff8c0400 0x100>;
altr,ecc-parent = <&gmac0>;
- interrupts = <5 4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
};
sdmmca-ecc@ff8c8c00 {
"altr,socfpga-sdmmc-ecc";
reg = <0xff8c8c00 0x100>;
altr,ecc-parent = <&mmc>;
- interrupts = <14 4>,
- <15 4>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
psci {
- compatible = "arm,psci-0.2", "arm,psci";
+ compatible = "arm,psci-0.2", "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
uart1: serial@fe100000 {
compatible = "arm,pl011", "arm,primecell";
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
uart2: serial@fe200000 {
compatible = "arm,pl011", "arm,primecell";
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfd400000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio1: gpio@fd410000 {
#gpio-cells = <2>;
reg = <0x0 0xfd410000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio2: gpio@fd420000 {
#gpio-cells = <2>;
reg = <0x0 0xfd420000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio3: gpio@fd430000 {
#gpio-cells = <2>;
reg = <0x0 0xfd440000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio5: gpio@fd450000 {
#gpio-cells = <2>;
reg = <0x0 0xfd450000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio6: gpio@fd460000 {
#gpio-cells = <2>;
reg = <0x0 0xfd460000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio7: gpio@fd470000 {
#gpio-cells = <2>;
reg = <0x0 0xfd470000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio8: gpio@fd480000 {
#gpio-cells = <2>;
reg = <0x0 0xfd480000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio9: gpio@fd490000 {
#gpio-cells = <2>;
reg = <0x0 0xfd490000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio10: gpio@fd4a0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4a0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio11: gpio@fd4b0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4c0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio13: gpio@fd4d0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4d0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio14: gpio@fd4e0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4e0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio15: gpio@fd4f0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4f0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio16: gpio@fd500000 {
#gpio-cells = <2>;
reg = <0x0 0xfd500000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio17: gpio@fd510000 {
#gpio-cells = <2>;
};
psci {
- compatible = "arm,psci-0.2", "arm,psci";
+ compatible = "arm,psci-0.2", "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
uart1: serial@fe100000 {
compatible = "arm,pl011", "arm,primecell";
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
uart2: serial@fe200000 {
compatible = "arm,pl011", "arm,primecell";
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfd400000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio1: gpio@fd410000 {
#gpio-cells = <2>;
reg = <0x0 0xfd410000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio2: gpio@fd420000 {
#gpio-cells = <2>;
reg = <0x0 0xfd420000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio3: gpio@fd430000 {
#gpio-cells = <2>;
reg = <0x0 0xfd440000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio5: gpio@fd450000 {
#gpio-cells = <2>;
reg = <0x0 0xfd450000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio6: gpio@fd460000 {
#gpio-cells = <2>;
reg = <0x0 0xfd460000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio7: gpio@fd470000 {
#gpio-cells = <2>;
reg = <0x0 0xfd470000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio8: gpio@fd480000 {
#gpio-cells = <2>;
reg = <0x0 0xfd480000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio9: gpio@fd490000 {
#gpio-cells = <2>;
reg = <0x0 0xfd490000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio10: gpio@fd4a0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4a0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio11: gpio@fd4b0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4c0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio13: gpio@fd4d0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4d0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio14: gpio@fd4e0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4e0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio15: gpio@fd4f0000 {
#gpio-cells = <2>;
reg = <0x0 0xfd4f0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio16: gpio@fd500000 {
#gpio-cells = <2>;
reg = <0x0 0xfd500000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
- status="disabled";
+ status = "disabled";
};
gpio17: gpio@fd510000 {
#gpio-cells = <2>;
dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "Marvell AC5 SoC";
+ compatible = "marvell,ac5";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-ranges;
+
+ internal-regs@7f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ /* 16M internal register @ 0x7f00_0000 */
+ ranges = <0x0 0x0 0x7f000000 0x1000000>;
+ dma-coherent;
+
+ uart0: serial@12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&cnm_clock>;
+ status = "okay";
+ };
+
+ mdio: mdio@22004 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x22004 0x4>;
+ clocks = <&cnm_clock>;
+ };
+
+ i2c0: i2c@11000{
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&cnm_clock>;
+ clock-names = "core";
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency=<100000>;
+
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-1 = <&i2c0_gpio>;
+ scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100{
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&cnm_clock>;
+ clock-names = "core";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency=<100000>;
+
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_gpio>;
+ scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl0 0 0 32>;
+ marvell,pwm-offset = <0x1f0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio1: gpio@18140 {
+ reg = <0x18140 0x40>;
+ compatible = "marvell,orion-gpio";
+ ngpios = <14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl0 0 32 14>;
+ marvell,pwm-offset = <0x1f0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ /*
+ * Dedicated section for devices behind 32bit controllers so we
+ * can configure specific DMA mapping for them
+ */
+ behind-32bit-controller@7f000000 {
+ compatible = "simple-bus";
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>;
+ /* Host phy ram starts at 0x200M */
+ dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>;
+ dma-coherent;
+
+ eth0: ethernet@20000 {
+ compatible = "marvell,armada-ac5-neta";
+ reg = <0x0 0x20000 0x0 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cnm_clock>;
+ phy-mode = "sgmii";
+ status = "disabled";
+ };
+
+ eth1: ethernet@24000 {
+ compatible = "marvell,armada-ac5-neta";
+ reg = <0x0 0x24000 0x0 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cnm_clock>;
+ phy-mode = "sgmii";
+ status = "disabled";
+ };
+
+ usb0: usb@80000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x0 0x80000 0x0 0x500>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usb1: usb@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x0 0xa0000 0x0 0x500>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ pinctrl0: pinctrl@80020100 {
+ compatible = "marvell,ac5-pinctrl";
+ reg = <0 0x80020100 0 0x20>;
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c0";
+ };
+
+ i2c0_gpio: i2c0-gpio-pins {
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "gpio";
+ };
+
+ i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp20", "mpp21";
+ marvell,function = "i2c1";
+ };
+
+ i2c1_gpio: i2c1-gpio-pins {
+ marvell,pins = "mpp20", "mpp21";
+ marvell,function = "i2c1";
+ };
+ };
+
+ spi0: spi@805a0000 {
+ compatible = "marvell,armada-3700-spi";
+ reg = <0x0 0x805a0000 0x0 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&spi_clock>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi1: spi@805a8000 {
+ compatible = "marvell,armada-3700-spi";
+ reg = <0x0 0x805a8000 0x0 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&spi_clock>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@80600000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */
+ <0x0 0x80660000 0x0 0x40000>; /* GICR */
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ clocks {
+ cnm_clock: cnm-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <328000000>;
+ };
+
+ spi_clock: spi-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+ model = "Marvell RD-AC5X Board";
+ compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+ aliases {
+ serial0 = &uart0;
+ spiflash0 = &spiflash0;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x2 0x00000000 0x0 0x40000000>;
+ };
+
+ usb1phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+ status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+ status = "okay";
+ phys = <&usb1phy>;
+ phy-names = "usb-phy";
+ dr_mode = "peripheral";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+ spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "spi_flash_part0";
+ reg = <0x0 0x800000>;
+ };
+
+ parition@1 {
+ label = "spi_flash_part1";
+ reg = <0x800000 0x700000>;
+ };
+
+ parition@2 {
+ label = "spi_flash_part2";
+ reg = <0xF00000 0x100000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5X.
+ *
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include "ac5-98dx25xx.dtsi"
+
+/ {
+ model = "Marvell AC5X SoC";
+ compatible = "marvell,ac5x", "marvell,ac5";
+};
+
+&cnm_clock {
+ clock-frequency = <325000000>;
+};
leds {
compatible = "gpio-leds";
- red {
+ led {
label = "mox:red:activity";
gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
};
/* SFP 1G */
los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear button */
label = "Rear Button";
gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
/* The wps button */
label = "WPS Button";
gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp0_pins>;
maximum-power-milliwatt = <2000>;
los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
&cp0_usb3_1 {
status = "okay";
usb-phy = <&cp0_usb3_0_phy1>;
- phys = <&cp0_utmi1>;
+ phys = <&cp0_utmi1>;
phy-names = "utmi";
dr_mode = "host";
};
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
};
ð {
- phy-mode ="rgmii-rxid";
+ phy-mode = "rgmii-rxid";
phy-handle = <ðernet_phy0>;
mediatek,tx-delay-ps = <1530>;
snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
+ mediatek,infracfg = <&infracfg>;
mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
<&larb3>, <&larb6>;
#iommu-cells = <1>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
+ mediatek,infracfg = <&infracfg>;
mediatek,larbs = <&larb4>, <&larb5>, <&larb7>;
#iommu-cells = <1>;
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6795-pinfunc.h>
/ {
compatible = "mediatek,mt6795";
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x000>;
+ cci-control-port = <&cci_control2>;
+ next-level-cache = <&l2_0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x001>;
+ cci-control-port = <&cci_control2>;
+ next-level-cache = <&l2_0>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x002>;
+ cci-control-port = <&cci_control2>;
+ next-level-cache = <&l2_0>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x003>;
+ cci-control-port = <&cci_control2>;
+ next-level-cache = <&l2_0>;
};
cpu4: cpu@100 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x100>;
+ cci-control-port = <&cci_control1>;
+ next-level-cache = <&l2_1>;
};
cpu5: cpu@101 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x101>;
+ cci-control-port = <&cci_control1>;
+ next-level-cache = <&l2_1>;
};
cpu6: cpu@102 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x102>;
+ cci-control-port = <&cci_control1>;
+ next-level-cache = <&l2_1>;
};
cpu7: cpu@103 {
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x103>;
+ cci-control-port = <&cci_control1>;
+ next-level-cache = <&l2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+
+ core2 {
+ cpu = <&cpu6>;
+ };
+
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-level = <2>;
};
};
- system_clk: dummy13m {
+ clk26m: oscillator-26m {
compatible = "fixed-clock";
- clock-frequency = <13000000>;
#clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
};
- rtc_clk: dummy32k {
+ clk32k: oscillator-32k {
compatible = "fixed-clock";
- clock-frequency = <32000>;
#clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
};
- uart_clk: dummy26m {
+ system_clk: dummy13m {
compatible = "fixed-clock";
- clock-frequency = <26000000>;
+ clock-frequency = <13000000>;
#clock-cells = <0>;
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
- sysirq: intpol-controller@10200620 {
- compatible = "mediatek,mt6795-sysirq",
- "mediatek,mt6577-sysirq";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- reg = <0 0x10200620 0 0x20>;
- };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
- gic: interrupt-controller@10221000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
- reg = <0 0x10221000 0 0x1000>,
- <0 0x10222000 0 0x2000>,
- <0 0x10224000 0 0x2000>,
- <0 0x10226000 0 0x2000>;
- };
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt6795-pinctrl";
+ reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+ reg-names = "base", "eint";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 196>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- uart0: serial@11002000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11002000 0 0x400>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt6795-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+ #reset-cells = <1>;
+ timeout-sec = <20>;
+ };
- uart1: serial@11003000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11003000 0 0x400>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6795-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&clk32k>;
+ };
- uart2: serial@11004000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11004000 0 0x400>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6795-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10221000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10221000 0 0x1000>,
+ <0 0x10222000 0 0x2000>,
+ <0 0x10224000 0 0x2000>,
+ <0 0x10226000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ cci: cci@10390000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x10390000 0 0x1000>;
+ ranges = <0 0 0x10390000 0x10000>;
- uart3: serial@11005000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11005000 0 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
};
};
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
gpio-keys {
compatible = "gpio-keys";
- factory {
+ factory-key {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
- wps {
+ wps-key {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 102 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "bpi-r64:pio:green";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- red {
+ led-1 {
label = "bpi-r64:pio:red";
+ color = <LED_COLOR_ID_RED>;
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
i2c1_pins: i2c1-pins {
mux {
function = "i2c";
- groups = "i2c1_0";
+ groups = "i2c1_0";
};
};
i2c2_pins: i2c2-pins {
mux {
function = "i2c";
- groups = "i2c2_0";
+ groups = "i2c2_0";
};
};
irrx_pins: irrx-pins {
mux {
function = "ir";
- groups = "ir_1_rx";
+ groups = "ir_1_rx";
};
};
irtx_pins: irtx-pins {
mux {
function = "ir";
- groups = "ir_1_tx";
+ groups = "ir_1_tx";
};
};
gpio-keys {
compatible = "gpio-keys";
- poll-interval = <100>;
- factory {
+ key-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 0>;
};
- wps {
+ key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 0>;
i2c1_pins: i2c1-pins {
mux {
function = "i2c";
- groups = "i2c1_0";
+ groups = "i2c1_0";
};
};
i2c2_pins: i2c2-pins {
mux {
function = "i2c";
- groups = "i2c2_0";
+ groups = "i2c2_0";
};
};
irrx_pins: irrx-pins {
mux {
function = "ir";
- groups = "ir_1_rx";
+ groups = "ir_1_rx";
};
};
irtx_pins: irtx-pins {
mux {
function = "ir";
- groups = "ir_1_tx";
+ groups = "ir_1_tx";
};
};
};
psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ compatible = "arm,psci-0.2";
+ method = "smc";
};
pmu {
afe: audio-controller {
compatible = "mediatek,mt7622-audio";
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
<&topckgen CLK_TOP_AUD1_SEL>,
};
psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ compatible = "arm,psci-0.2";
+ method = "smc";
};
reserved-memory {
};
&gpio_keys {
- /delete-node/tablet_mode;
- /delete-node/volume_down;
- /delete-node/volume_up;
+ /delete-node/switch-tablet-mode;
+ /delete-node/switch-volume-down;
+ /delete-node/switch-volume-up;
};
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&pio 69 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
gpio-key,wakeup;
};
- power {
+ switch-power {
label = "Power";
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
- tablet_mode {
+ switch-tablet-mode {
label = "Tablet_mode";
gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
linux,code = <SW_TABLET_MODE>;
gpio-key,wakeup;
};
- volume_down {
+ switch-volume-down {
label = "Volume_down";
gpios = <&pio 123 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ switch-volume-up {
label = "Volume_up";
gpios = <&pio 124 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
regulator-name = "VBUCKA";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <4400000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <4400000>;
regulator-ramp-delay = <10000>;
regulator-always-on;
regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
regulator-name = "VBUCKB";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <3000000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <3000000>;
regulator-ramp-delay = <10000>;
};
};
mmc-hs400-1_8v;
cap-mmc-hw-reset;
hs400-ds-delay = <0x14015>;
- mediatek,hs200-cmd-int-delay=<30>;
- mediatek,hs400-cmd-int-delay=<14>;
+ mediatek,hs200-cmd-int-delay = <30>;
+ mediatek,hs400-cmd-int-delay = <14>;
mediatek,hs400-cmd-resp-sel-rising;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
sd-uhs-sdr50;
sd-uhs-sdr104;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
cap-sdio-irq;
vmmc-supply = <&sdio_fixed_3v3>;
vqmmc-supply = <&mt6397_vgp3_reg>;
regulator-name = "VBUCKA";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <4400000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <4400000>;
regulator-ramp-delay = <10000>;
regulator-always-on;
};
regulator-name = "VBUCKB";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <3000000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <3000000>;
regulator-ramp-delay = <10000>;
};
};
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
- mediatek,hs200-cmd-int-delay=<26>;
- mediatek,hs400-cmd-int-delay=<14>;
+ mediatek,hs200-cmd-int-delay = <26>;
+ mediatek,hs400-cmd-int-delay = <14>;
mediatek,hs400-cmd-resp-sel-rising;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
method = "smc";
- cpu_suspend = <0x84000001>;
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
};
clk26m: oscillator0 {
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
+ mediatek,infracfg = <&infracfg>;
mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
<&larb3>, <&larb4>, <&larb5>;
#iommu-cells = <1>;
nor_flash: spi@1100d000 {
compatible = "mediatek,mt8173-nor";
reg = <0 0x1100d000 0 0xe0>;
+ assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>;
+ assigned-clock-parents = <&clk26m>;
clocks = <&pericfg CLK_PERI_SPI>,
- <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
- clock-names = "spi", "sf";
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+ <&pericfg CLK_PERI_NFI>;
+ clock-names = "spi", "sf", "axi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
vcodec_enc_vp8: vcodec@19002000 {
compatible = "mediatek,mt8173-vcodec-enc-vp8";
- reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
+ reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
<&iommu M4U_PORT_VENC_REC_FRM_SET2>,
vmmc-supply = <&mt6358_vmch_reg>;
vqmmc-supply = <&mt6358_vmc_reg>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
non-removable;
};
};
+&cci {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu0 {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+ proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+ proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+ proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+ proc-supply = <&mt6358_vproc11_reg>;
+};
+
&uart0 {
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&volume_button_pins>;
- volume_down {
+ button-volume-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
- volume_up {
+ button-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
pinctrl-names = "default";
pinctrl-0 = <&pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_wakeup>;
- wowlan {
+ button-wowlan {
label = "Wake on WiFi";
gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
status = "okay";
};
+&cci {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
&cpu0 {
proc-supply = <&mt6358_vproc12_reg>;
};
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
+ rotation = <270>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
sd-uhs-sdr50;
sd-uhs-sdr104;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
cap-sdio-irq;
non-removable;
no-mmc;
};
};
+&mfg_async {
+ domain-supply = <&mt6358_vsram_gpu_reg>;
+};
+
&mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
vmmc-supply = <&mt6358_vmch_reg>;
vqmmc-supply = <&mt6358_vmc_reg>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
non-removable;
};
rdma1 = &rdma1;
};
+ cluster0_opp: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp0-793000000 {
+ opp-hz = /bits/ 64 <793000000>;
+ opp-microvolt = <650000>;
+ required-opps = <&opp2_00>;
+ };
+ opp0-910000000 {
+ opp-hz = /bits/ 64 <910000000>;
+ opp-microvolt = <687500>;
+ required-opps = <&opp2_01>;
+ };
+ opp0-1014000000 {
+ opp-hz = /bits/ 64 <1014000000>;
+ opp-microvolt = <718750>;
+ required-opps = <&opp2_02>;
+ };
+ opp0-1131000000 {
+ opp-hz = /bits/ 64 <1131000000>;
+ opp-microvolt = <756250>;
+ required-opps = <&opp2_03>;
+ };
+ opp0-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-microvolt = <800000>;
+ required-opps = <&opp2_04>;
+ };
+ opp0-1326000000 {
+ opp-hz = /bits/ 64 <1326000000>;
+ opp-microvolt = <818750>;
+ required-opps = <&opp2_05>;
+ };
+ opp0-1417000000 {
+ opp-hz = /bits/ 64 <1417000000>;
+ opp-microvolt = <850000>;
+ required-opps = <&opp2_06>;
+ };
+ opp0-1508000000 {
+ opp-hz = /bits/ 64 <1508000000>;
+ opp-microvolt = <868750>;
+ required-opps = <&opp2_07>;
+ };
+ opp0-1586000000 {
+ opp-hz = /bits/ 64 <1586000000>;
+ opp-microvolt = <893750>;
+ required-opps = <&opp2_08>;
+ };
+ opp0-1625000000 {
+ opp-hz = /bits/ 64 <1625000000>;
+ opp-microvolt = <906250>;
+ required-opps = <&opp2_09>;
+ };
+ opp0-1677000000 {
+ opp-hz = /bits/ 64 <1677000000>;
+ opp-microvolt = <931250>;
+ required-opps = <&opp2_10>;
+ };
+ opp0-1716000000 {
+ opp-hz = /bits/ 64 <1716000000>;
+ opp-microvolt = <943750>;
+ required-opps = <&opp2_11>;
+ };
+ opp0-1781000000 {
+ opp-hz = /bits/ 64 <1781000000>;
+ opp-microvolt = <975000>;
+ required-opps = <&opp2_12>;
+ };
+ opp0-1846000000 {
+ opp-hz = /bits/ 64 <1846000000>;
+ opp-microvolt = <1000000>;
+ required-opps = <&opp2_13>;
+ };
+ opp0-1924000000 {
+ opp-hz = /bits/ 64 <1924000000>;
+ opp-microvolt = <1025000>;
+ required-opps = <&opp2_14>;
+ };
+ opp0-1989000000 {
+ opp-hz = /bits/ 64 <1989000000>;
+ opp-microvolt = <1050000>;
+ required-opps = <&opp2_15>;
+ }; };
+
+ cluster1_opp: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp1-793000000 {
+ opp-hz = /bits/ 64 <793000000>;
+ opp-microvolt = <700000>;
+ required-opps = <&opp2_00>;
+ };
+ opp1-910000000 {
+ opp-hz = /bits/ 64 <910000000>;
+ opp-microvolt = <725000>;
+ required-opps = <&opp2_01>;
+ };
+ opp1-1014000000 {
+ opp-hz = /bits/ 64 <1014000000>;
+ opp-microvolt = <750000>;
+ required-opps = <&opp2_02>;
+ };
+ opp1-1131000000 {
+ opp-hz = /bits/ 64 <1131000000>;
+ opp-microvolt = <775000>;
+ required-opps = <&opp2_03>;
+ };
+ opp1-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-microvolt = <800000>;
+ required-opps = <&opp2_04>;
+ };
+ opp1-1326000000 {
+ opp-hz = /bits/ 64 <1326000000>;
+ opp-microvolt = <825000>;
+ required-opps = <&opp2_05>;
+ };
+ opp1-1417000000 {
+ opp-hz = /bits/ 64 <1417000000>;
+ opp-microvolt = <850000>;
+ required-opps = <&opp2_06>;
+ };
+ opp1-1508000000 {
+ opp-hz = /bits/ 64 <1508000000>;
+ opp-microvolt = <875000>;
+ required-opps = <&opp2_07>;
+ };
+ opp1-1586000000 {
+ opp-hz = /bits/ 64 <1586000000>;
+ opp-microvolt = <900000>;
+ required-opps = <&opp2_08>;
+ };
+ opp1-1625000000 {
+ opp-hz = /bits/ 64 <1625000000>;
+ opp-microvolt = <912500>;
+ required-opps = <&opp2_09>;
+ };
+ opp1-1677000000 {
+ opp-hz = /bits/ 64 <1677000000>;
+ opp-microvolt = <931250>;
+ required-opps = <&opp2_10>;
+ };
+ opp1-1716000000 {
+ opp-hz = /bits/ 64 <1716000000>;
+ opp-microvolt = <950000>;
+ required-opps = <&opp2_11>;
+ };
+ opp1-1781000000 {
+ opp-hz = /bits/ 64 <1781000000>;
+ opp-microvolt = <975000>;
+ required-opps = <&opp2_12>;
+ };
+ opp1-1846000000 {
+ opp-hz = /bits/ 64 <1846000000>;
+ opp-microvolt = <1000000>;
+ required-opps = <&opp2_13>;
+ };
+ opp1-1924000000 {
+ opp-hz = /bits/ 64 <1924000000>;
+ opp-microvolt = <1025000>;
+ required-opps = <&opp2_14>;
+ };
+ opp1-1989000000 {
+ opp-hz = /bits/ 64 <1989000000>;
+ opp-microvolt = <1050000>;
+ required-opps = <&opp2_15>;
+ };
+ };
+
+ cci_opp: opp-table-cci {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp2_00: opp-273000000 {
+ opp-hz = /bits/ 64 <273000000>;
+ opp-microvolt = <650000>;
+ };
+ opp2_01: opp-338000000 {
+ opp-hz = /bits/ 64 <338000000>;
+ opp-microvolt = <687500>;
+ };
+ opp2_02: opp-403000000 {
+ opp-hz = /bits/ 64 <403000000>;
+ opp-microvolt = <718750>;
+ };
+ opp2_03: opp-463000000 {
+ opp-hz = /bits/ 64 <463000000>;
+ opp-microvolt = <756250>;
+ };
+ opp2_04: opp-546000000 {
+ opp-hz = /bits/ 64 <546000000>;
+ opp-microvolt = <800000>;
+ };
+ opp2_05: opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-microvolt = <818750>;
+ };
+ opp2_06: opp-689000000 {
+ opp-hz = /bits/ 64 <689000000>;
+ opp-microvolt = <850000>;
+ };
+ opp2_07: opp-767000000 {
+ opp-hz = /bits/ 64 <767000000>;
+ opp-microvolt = <868750>;
+ };
+ opp2_08: opp-845000000 {
+ opp-hz = /bits/ 64 <845000000>;
+ opp-microvolt = <893750>;
+ };
+ opp2_09: opp-871000000 {
+ opp-hz = /bits/ 64 <871000000>;
+ opp-microvolt = <906250>;
+ };
+ opp2_10: opp-923000000 {
+ opp-hz = /bits/ 64 <923000000>;
+ opp-microvolt = <931250>;
+ };
+ opp2_11: opp-962000000 {
+ opp-hz = /bits/ 64 <962000000>;
+ opp-microvolt = <943750>;
+ };
+ opp2_12: opp-1027000000 {
+ opp-hz = /bits/ 64 <1027000000>;
+ opp-microvolt = <975000>;
+ };
+ opp2_13: opp-1092000000 {
+ opp-hz = /bits/ 64 <1092000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp2_14: opp-1144000000 {
+ opp-hz = /bits/ 64 <1144000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp2_15: opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1050000>;
+ };
+ };
+
+ cci: cci {
+ compatible = "mediatek,mt8183-cci";
+ clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cci", "intermediate";
+ operating-points-v2 = <&cci_opp>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+ clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
dynamic-power-coefficient = <84>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu1: cpu@1 {
enable-method = "psci";
capacity-dmips-mhz = <741>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+ clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
dynamic-power-coefficient = <84>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu2: cpu@2 {
enable-method = "psci";
capacity-dmips-mhz = <741>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+ clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
dynamic-power-coefficient = <84>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu3: cpu@3 {
enable-method = "psci";
capacity-dmips-mhz = <741>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+ clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
dynamic-power-coefficient = <84>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu4: cpu@100 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+ clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
dynamic-power-coefficient = <211>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu5: cpu@101 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+ clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
dynamic-power-coefficient = <211>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu6: cpu@102 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+ clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
dynamic-power-coefficient = <211>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
cpu7: cpu@103 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+ clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+ <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
dynamic-power-coefficient = <211>;
#cooling-cells = <2>;
+ mediatek,cci = <&cci>;
};
idle-states {
};
psci {
- compatible = "arm,psci-1.0";
- method = "smc";
+ compatible = "arm,psci-1.0";
+ method = "smc";
};
clk26m: oscillator {
compatible = "simple-bus";
ranges;
- soc_data: soc_data@8000000 {
+ soc_data: efuse@8000000 {
compatible = "mediatek,mt8183-efuse",
"mediatek,efuse";
reg = <0 0x08000000 0 0x0010>;
#power-domain-cells = <0>;
};
- power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
+ mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
- clocks = <&topckgen CLK_TOP_MUX_MFG>;
+ clocks = <&topckgen CLK_TOP_MUX_MFG>;
clock-names = "mfg";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ svs: svs@1100b000 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ };
+
thermal: thermal@1100b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt8183-thermal";
};
ssusb: usb@11201000 {
- compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+ compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
reg = <0 0x11201000 0 0x2e00>,
<0 0x11203e00 0 0x0100>;
reg-names = "mac", "ippc";
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
+
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy: t-phy@11f40000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
<CMDQ_EVENT_MUTEX_STREAM_DONE1>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
};
larb0: larb@14017000 {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+
+/ {
+ model = "Google Hayato rev1";
+ compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
+ MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
+ MATRIX_KEY(0x03, 0x04, KEY_SCALE)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&touchscreen {
+ compatible = "hid-over-i2c";
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_u>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Google Spherion (rev0 - 3)";
+ compatible = "google,spherion-rev3", "google,spherion-rev2",
+ "google,spherion-rev1", "google,spherion-rev0",
+ "google,spherion", "mediatek,mt8192";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ led {
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ pwms = <&cros_ec_pwm 0>;
+ max-brightness = <1023>;
+ };
+ };
+};
+
+&cros_ec_pwm {
+ status = "okay";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&touchscreen {
+ compatible = "elan,ekth3500";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8192.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ /* system wide LDO 1.8V power rail */
+ pp1800_ldo_g: regulator-1v8-g {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_ldo_g";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&pp3300_g>;
+ };
+
+ /* system wide switching 3.3V power rail */
+ pp3300_g: regulator-3v3-g {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_g";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide LDO 3.3V power rail */
+ pp3300_ldo_z: regulator-3v3-z {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_ldo_z";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* separately switched 3.3V power rail */
+ pp3300_u: regulator-3v3-u {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_u";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* enable pin wired to GPIO controlled by EC */
+ vin-supply = <&pp3300_g>;
+ };
+
+ pp3300_wlan: regulator-3v3-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_wlan";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp3300_wlan_pins>;
+ enable-active-high;
+ gpio = <&pio 143 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* system wide switching 5.0V power rail */
+ pp5000_a: regulator-5v0-a {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide semi-regulated power rail from battery or USB */
+ ppvar_sys: regulator-var-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scp_mem_reserved: scp@50000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x2900000>;
+ no-map;
+ };
+
+ wifi_restricted_dma_region: wifi@c0000000 {
+ compatible = "restricted-dma-pool";
+ reg = <0 0xc0000000 0 0x4000000>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ touchscreen: touchscreen@10 {
+ reg = <0x10>;
+ interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ clock-stretch-ns = <12600>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+ vcc-supply = <&pp3300_u>;
+ wakeup-source;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+};
+
+&mmc0 {
+ status = "okay";
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_default_pins>;
+ pinctrl-1 = <&mmc0_uhs_pins>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ supports-cqe;
+ cap-mmc-hw-reset;
+ mmc-hs400-enhanced-strobe;
+ hs400-ds-delay = <0x12814>;
+ no-sdio;
+ no-sd;
+ non-removable;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_default_pins>;
+ pinctrl-1 = <&mmc1_uhs_pins>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mt6360_ldo5_reg>;
+ vqmmc-supply = <&mt6360_ldo3_reg>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ no-sdio;
+ no-mmc;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+ regulator-always-on;
+ regulator-min-microvolt = <575000>;
+ regulator-max-microvolt = <575000>;
+};
+
+&mt6359_vrf12_ldo_reg {
+ regulator-always-on;
+};
+
+&mt6359_vufs_ldo_reg {
+ regulator-always-on;
+};
+
+&mt6359codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+ mediatek,mic-type-0 = <2>; /* DMIC */
+ mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&nor_flash {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nor_flash_pins>;
+ assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;
+
+ flash@0 {
+ compatible = "winbond,w25q64jwm", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+
+ pcie0: pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0000 0 0 0 0>;
+ num-lanes = <1>;
+ bus-range = <0x1 0x1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi: wifi@0,0 {
+ reg = <0x10000 0 0 0 0x100000>,
+ <0x10000 0 0x100000 0 0x100000>;
+ memory-region = <&wifi_restricted_dma_region>;
+ };
+ };
+};
+
+&pio {
+ /* 220 lines */
+ gpio-line-names = "I2S_DP_LRCK",
+ "IS_DP_BCLK",
+ "I2S_DP_MCLK",
+ "I2S_DP_DATAOUT",
+ "SAR0_INT_ODL",
+ "EC_AP_INT_ODL",
+ "EDPBRDG_INT_ODL",
+ "DPBRDG_INT_ODL",
+ "DPBRDG_PWREN",
+ "DPBRDG_RST_ODL",
+ "I2S_HP_MCLK",
+ "I2S_HP_BCK",
+ "I2S_HP_LRCK",
+ "I2S_HP_DATAIN",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it AP_FLASH_WP_ODL.
+ */
+ "AP_FLASH_WP_L",
+ "TRACKPAD_INT_ODL",
+ "EC_AP_HPD_OD",
+ "SD_CD_ODL",
+ "HP_INT_ODL_ALC",
+ "EN_PP1000_DPBRDG",
+ "AP_GPIO20",
+ "TOUCH_INT_L_1V8",
+ "UART_BT_WAKE_ODL",
+ "AP_GPIO23",
+ "AP_SPI_FLASH_CS_L",
+ "AP_SPI_FLASH_CLK",
+ "EN_PP3300_DPBRDG_DX",
+ "AP_SPI_FLASH_MOSI",
+ "AP_SPI_FLASH_MISO",
+ "I2S_HP_DATAOUT",
+ "AP_GPIO30",
+ "I2S_SPKR_MCLK",
+ "I2S_SPKR_BCLK",
+ "I2S_SPKR_LRCK",
+ "I2S_SPKR_DATAIN",
+ "I2S_SPKR_DATAOUT",
+ "AP_SPI_H1_TPM_CLK",
+ "AP_SPI_H1_TPM_CS_L",
+ "AP_SPI_H1_TPM_MISO",
+ "AP_SPI_H1_TPM_MOSI",
+ "BL_PWM",
+ "EDPBRDG_PWREN",
+ "EDPBRDG_RST_ODL",
+ "EN_PP3300_HUB",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SD_CLK",
+ "SD_CMD",
+ "SD_DATA3",
+ "SD_DATA0",
+ "SD_DATA2",
+ "SD_DATA1",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PCIE_WAKE_ODL",
+ "PCIE_RST_L",
+ "PCIE_CLKREQ_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SPMI_SCL",
+ "SPMI_SDA",
+ "AP_GOOD",
+ "UART_DBG_TX_AP_RX",
+ "UART_AP_TX_DBG_RX",
+ "UART_AP_TX_BT_RX",
+ "UART_BT_TX_AP_RX",
+ "MIPI_DPI_D0_R",
+ "MIPI_DPI_D1_R",
+ "MIPI_DPI_D2_R",
+ "MIPI_DPI_D3_R",
+ "MIPI_DPI_D4_R",
+ "MIPI_DPI_D5_R",
+ "MIPI_DPI_D6_R",
+ "MIPI_DPI_D7_R",
+ "MIPI_DPI_D8_R",
+ "MIPI_DPI_D9_R",
+ "MIPI_DPI_D10_R",
+ "",
+ "",
+ "MIPI_DPI_DE_R",
+ "MIPI_DPI_D11_R",
+ "MIPI_DPI_VSYNC_R",
+ "MIPI_DPI_CLK_R",
+ "MIPI_DPI_HSYNC_R",
+ "PCM_BT_DATAIN",
+ "PCM_BT_SYNC",
+ "PCM_BT_DATAOUT",
+ "PCM_BT_CLK",
+ "AP_I2C_AUDIO_SCL",
+ "AP_I2C_AUDIO_SDA",
+ "SCP_I2C_SCL",
+ "SCP_I2C_SDA",
+ "AP_I2C_WLAN_SCL",
+ "AP_I2C_WLAN_SDA",
+ "AP_I2C_DPBRDG_SCL",
+ "AP_I2C_DPBRDG_SDA",
+ "EN_PP1800_DPBRDG_DX",
+ "EN_PP3300_EDP_DX",
+ "EN_PP1800_EDPBRDG_DX",
+ "EN_PP1000_EDPBRDG",
+ "SCP_JTAG0_TDO",
+ "SCP_JTAG0_TDI",
+ "SCP_JTAG0_TMS",
+ "SCP_JTAG0_TCK",
+ "SCP_JTAG0_TRSTN",
+ "EN_PP3000_VMC_PMU",
+ "EN_PP3300_DISPLAY_DX",
+ "TOUCH_RST_L_1V8",
+ "TOUCH_REPORT_DISABLE",
+ "",
+ "",
+ "AP_I2C_TRACKPAD_SCL_1V8",
+ "AP_I2C_TRACKPAD_SDA_1V8",
+ "EN_PP3300_WLAN",
+ "BT_KILL_L",
+ "WIFI_KILL_L",
+ "SET_VMC_VOLT_AT_1V8",
+ "EN_SPK",
+ "AP_WARM_RST_REQ",
+ "",
+ "",
+ "EN_PP3000_SD_S3",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "",
+ "AP_SPI_EC_CLK",
+ "AP_SPI_EC_CS_L",
+ "AP_SPI_EC_MISO",
+ "AP_SPI_EC_MOSI",
+ "AP_I2C_EDPBRDG_SCL",
+ "AP_I2C_EDPBRDG_SDA",
+ "MT6315_PROC_INT",
+ "MT6315_GPU_INT",
+ "UART_SERVO_TX_SCP_RX",
+ "UART_SCP_TX_SERVO_RX",
+ "BT_RTS_AP_CTS",
+ "AP_RTS_BT_CTS",
+ "UART_AP_WAKE_BT_ODL",
+ "WLAN_ALERT_ODL",
+ "EC_IN_RW_ODL",
+ "H1_AP_INT_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MSDC0_CMD",
+ "MSDC0_DAT0",
+ "MSDC0_DAT2",
+ "MSDC0_DAT4",
+ "MSDC0_DAT6",
+ "MSDC0_DAT1",
+ "MSDC0_DAT5",
+ "MSDC0_DAT7",
+ "MSDC0_DSL",
+ "MSDC0_CLK",
+ "MSDC0_DAT3",
+ "MSDC0_RST_L",
+ "SCP_VREQ_VAO",
+ "AUD_DAT_MOSI2",
+ "AUD_NLE_MOSI1",
+ "AUD_NLE_MOSI0",
+ "AUD_DAT_MISO2",
+ "AP_I2C_SAR_SDA",
+ "AP_I2C_SAR_SCL",
+ "AP_I2C_PWR_SCL",
+ "AP_I2C_PWR_SDA",
+ "AP_I2C_TS_SCL_1V8",
+ "AP_I2C_TS_SDA_1V8",
+ "SRCLKENA0",
+ "SRCLKENA1",
+ "AP_EC_WATCHDOG_L",
+ "PWRAP_SPI0_MI",
+ "PWRAP_SPI0_CSN",
+ "PWRAP_SPI0_MO",
+ "PWRAP_SPI0_CK",
+ "AP_RTC_CLK32K",
+ "AUD_CLK_MOSI",
+ "AUD_SYNC_MOSI",
+ "AUD_DAT_MOSI0",
+ "AUD_DAT_MOSI1",
+ "AUD_DAT_MISO0",
+ "AUD_DAT_MISO1";
+
+ cr50_int: cr50-irq-default-pins {
+ pins-gsc-ap-int-odl {
+ pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
+ input-enable;
+ };
+ };
+
+ cros_ec_int: cros-ec-irq-default-pins {
+ pins-ec-ap-int-odl {
+ pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ i2c0_pins: i2c0-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+ <PINMUX_GPIO205__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c1_pins: i2c1-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+ <PINMUX_GPIO119__FUNC_SDA1>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c2_pins: i2c2-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+ <PINMUX_GPIO142__FUNC_SDA2>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c3_pins: i2c3-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+ <PINMUX_GPIO161__FUNC_SDA3>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c7_pins: i2c7-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+ <PINMUX_GPIO125__FUNC_SDA7>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ mmc0_default_pins: mmc0-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc0_uhs_pins: mmc0-uhs-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <10>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+ drive-strength = <10>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
+ drive-strength = <10>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ mmc1_default_pins: mmc1-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+ <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-insert {
+ pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_uhs_pins: mmc1-uhs-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+ <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ nor_flash_pins: nor-flash-default-pins {
+ pins-cs-io1 {
+ pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
+ <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
+ input-enable;
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pins-io0 {
+ pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
+ input-enable;
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ pcie_pins: pcie-default-pins {
+ pins-pcie-wake {
+ pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
+ bias-pull-up;
+ };
+
+ pins-pcie-pereset {
+ pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
+ };
+
+ pins-pcie-clkreq {
+ pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
+ bias-pull-up;
+ };
+
+ pins-wifi-kill {
+ pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
+ output-high;
+ };
+ };
+
+ pp3300_wlan_pins: pp3300-wlan-pins {
+ pins-pcie-en-pp3300-wlan {
+ pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
+ output-high;
+ };
+ };
+
+ scp_pins: scp-pins {
+ pins-vreq-vao {
+ pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
+ };
+ };
+
+ spi1_pins: spi1-default-pins {
+ pins-cs-mosi-clk {
+ pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+ <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+ <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+ bias-disable;
+ };
+
+ pins-miso {
+ pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+ bias-pull-down;
+ };
+ };
+
+ spi5_pins: spi5-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+ <PINMUX_GPIO37__FUNC_GPIO37>,
+ <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+ <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+ bias-disable;
+ };
+ };
+
+ trackpad_pins: trackpad-default-pins {
+ pins-int-n {
+ pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ touchscreen_pins: touchscreen-default-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
+ output-high;
+ };
+
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
+ output-low;
+ };
+ };
+};
+
+&pmic {
+ interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+ status = "okay";
+
+ firmware-name = "mediatek/mt8192/scp.img";
+ memory-region = <&scp_mem_reserved>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&scp_pins>;
+
+ cros-ec {
+ compatible = "google,cros-ec-rpmsg";
+ mediatek,rpmsg-name = "cros-ec-rpmsg";
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cros_ec_int>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ base_detection: cbas {
+ compatible = "google,cros-cbas";
+ };
+
+ cros_ec_pwm: pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+
+ status = "disabled";
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mt6360_ldo3_reg: regulator@0 {
+ compatible = "google,cros-ec-regulator";
+ reg = <0>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ mt6360_ldo5_reg: regulator@1 {
+ compatible = "google,cros-ec-regulator";
+ reg = <1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ typec {
+ compatible = "google,cros-ec-typec";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "left";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+
+ usb_c1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "right";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+ };
+ };
+};
+
+&spi5 {
+ status = "okay";
+
+ cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
+
+ cr50@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
+ spi-max-frequency = <1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cr50_int>;
+ };
+};
+
+&spmi {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ mt6315_6: pmic@6 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x6 SPMI_USID>;
+
+ regulators {
+ mt6315_6_vbuck1: vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-name = "Vbcpu";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2>;
+ regulator-always-on;
+ };
+
+ mt6315_6_vbuck3: vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-name = "Vlcpu";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ mt6315_7: pmic@7 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x7 SPMI_USID>;
+
+ regulators {
+ mt6315_7_vbuck1: vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-name = "Vgpu";
+ regulator-min-microvolt = <606250>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+
+ wakeup-source;
+ vusb33-supply = <&pp3300_g>;
+ vbus-supply = <&pp5000_a>;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
reg = <0x000>;
enable-method = "psci";
clock-frequency = <1701000000>;
- cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
reg = <0x100>;
enable-method = "psci";
clock-frequency = <1701000000>;
- cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
reg = <0x200>;
enable-method = "psci";
clock-frequency = <1701000000>;
- cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
reg = <0x300>;
enable-method = "psci";
clock-frequency = <1701000000>;
- cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
reg = <0x400>;
enable-method = "psci";
clock-frequency = <2171000000>;
- cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
reg = <0x500>;
enable-method = "psci";
clock-frequency = <2171000000>;
- cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
reg = <0x600>;
enable-method = "psci";
clock-frequency = <2171000000>;
- cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
reg = <0x700>;
enable-method = "psci";
clock-frequency = <2171000000>;
- cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
};
idle-states {
- entry-method = "arm,psci";
- cpuoff_l: cpuoff_l {
+ entry-method = "psci";
+ cpu_sleep_l: cpu-sleep-l {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x00010001>;
local-timer-stop;
exit-latency-us = <140>;
min-residency-us = <780>;
};
- cpuoff_b: cpuoff_b {
+ cpu_sleep_b: cpu-sleep-b {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x00010001>;
local-timer-stop;
exit-latency-us = <145>;
min-residency-us = <720>;
};
- clusteroff_l: clusteroff_l {
+ cluster_sleep_l: cluster-sleep-l {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x01010002>;
local-timer-stop;
exit-latency-us = <155>;
min-residency-us = <860>;
};
- clusteroff_b: clusteroff_b {
+ cluster_sleep_b: cluster-sleep-b {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x01010002>;
local-timer-stop;
compatible = "mediatek,mt8192-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
pericfg: syscon@10003000 {
};
efuse: efuse@11c10000 {
- compatible = "mediatek,efuse";
+ compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
reg = <0 0x11c10000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+ model = "Acer Tomato (rev1) board";
+ compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
+};
+
+&ts_10 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+ model = "Acer Tomato (rev2) board";
+ compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195";
+};
+
+&pio_default {
+ pins-low-power-hdmi-disable {
+ pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+ <PINMUX_GPIO32__FUNC_GPIO32>,
+ <PINMUX_GPIO33__FUNC_GPIO33>,
+ <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ pins-low-power-pcie0-disable {
+ pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+ <PINMUX_GPIO20__FUNC_GPIO20>,
+ <PINMUX_GPIO21__FUNC_GPIO21>;
+ input-enable;
+ bias-pull-down;
+ };
+};
+
+&ts_10 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+ model = "Acer Tomato (rev3 - 4) board";
+ compatible = "google,tomato-rev4", "google,tomato-rev3",
+ "google,tomato", "mediatek,mt8195";
+};
+
+&pio_default {
+ pins-low-power-hdmi-disable {
+ pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+ <PINMUX_GPIO32__FUNC_GPIO32>,
+ <PINMUX_GPIO33__FUNC_GPIO33>,
+ <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ pins-low-power-pcie0-disable {
+ pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+ <PINMUX_GPIO20__FUNC_GPIO20>,
+ <PINMUX_GPIO21__FUNC_GPIO21>;
+ input-enable;
+ bias-pull-down;
+ };
+};
+
+&ts_10 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c7 = &i2c7;
+ mmc0 = &mmc0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ /* system wide LDO 3.3V power rail */
+ pp3300_z5: regulator-pp3300-ldo-z5 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_ldo_z5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* separately switched 3.3V power rail */
+ pp3300_s3: regulator-pp3300-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_s3";
+ /* automatically sequenced by PMIC EXT_PMIC_EN2 */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&pp3300_z2>;
+ };
+
+ /* system wide 3.3V power rail */
+ pp3300_z2: regulator-pp3300-z2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_z2";
+ /* EN pin tied to pp4200_z2, which is controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide 4.2V power rail */
+ pp4200_z2: regulator-pp4200-z2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp4200_z2";
+ /* controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide switching 5.0V power rail */
+ pp5000_s5: regulator-pp5000-s5 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_s5";
+ /* controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide semi-regulated power rail from battery or USB */
+ ppvar_sys: regulator-ppvar-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ usb_vbus: regulator-5v0-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-internal-delay-ns = <12500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ ts_10: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x0001>;
+ interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ post-power-on-delay-ms = <10>;
+ vdd-supply = <&pp3300_s3>;
+ status = "disabled";
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+
+ pmic@34 {
+ #interrupt-cells = <1>;
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ interrupt-controller;
+ interrupts-extended = <&pio 130 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "IRQB";
+ pinctrl-names = "default";
+ pinctrl-0 = <&subpmic_default>;
+ wakeup-source;
+ };
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ hs400-ds-delay = <0x14c11>;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ no-sdio;
+ no-sd;
+ non-removable;
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+};
+
+/* for CPU-L */
+&mt6359_vcore_buck_reg {
+ regulator-always-on;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+ regulator-always-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <550000>;
+};
+
+/* for CORE SRAM */
+&mt6359_vpu_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+ regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+ regulator-always-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+};
+
+&mt6359_vufs_ldo_reg {
+ regulator-always-on;
+};
+
+&nor_flash {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nor_pins_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
+&pio {
+ mediatek,rsel-resistance-in-si-unit;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pio_default>;
+
+ /* 144 lines */
+ gpio-line-names =
+ "I2S_SPKR_MCLK",
+ "I2S_SPKR_DATAIN",
+ "I2S_SPKR_LRCK",
+ "I2S_SPKR_BCLK",
+ "EC_AP_INT_ODL",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it AP_FLASH_WP_ODL.
+ */
+ "AP_FLASH_WP_L",
+ "TCHPAD_INT_ODL",
+ "EDP_HPD_1V8",
+ "AP_I2C_CAM_SDA",
+ "AP_I2C_CAM_SCL",
+ "AP_I2C_TCHPAD_SDA_1V8",
+ "AP_I2C_TCHPAD_SCL_1V8",
+ "AP_I2C_AUD_SDA",
+ "AP_I2C_AUD_SCL",
+ "AP_I2C_TPM_SDA_1V8",
+ "AP_I2C_TPM_SCL_1V8",
+ "AP_I2C_TCHSCR_SDA_1V8",
+ "AP_I2C_TCHSCR_SCL_1V8",
+ "EC_AP_HPD_OD",
+ "",
+ "PCIE_NVME_RST_L",
+ "PCIE_NVME_CLKREQ_ODL",
+ "PCIE_RST_1V8_L",
+ "PCIE_CLKREQ_1V8_ODL",
+ "PCIE_WAKE_1V8_ODL",
+ "CLK_24M_CAM0",
+ "CAM1_SEN_EN",
+ "AP_I2C_PWR_SCL_1V8",
+ "AP_I2C_PWR_SDA_1V8",
+ "AP_I2C_MISC_SCL",
+ "AP_I2C_MISC_SDA",
+ "EN_PP5000_HDMI_X",
+ "AP_HDMITX_HTPLG",
+ "",
+ "AP_HDMITX_SCL_1V8",
+ "AP_HDMITX_SDA_1V8",
+ "AP_RTC_CLK32K",
+ "AP_EC_WATCHDOG_L",
+ "SRCLKENA0",
+ "SRCLKENA1",
+ "PWRAP_SPI0_CS_L",
+ "PWRAP_SPI0_CK",
+ "PWRAP_SPI0_MOSI",
+ "PWRAP_SPI0_MISO",
+ "SPMI_SCL",
+ "SPMI_SDA",
+ "",
+ "",
+ "",
+ "I2S_HP_DATAIN",
+ "I2S_HP_MCLK",
+ "I2S_HP_BCK",
+ "I2S_HP_LRCK",
+ "I2S_HP_DATAOUT",
+ "SD_CD_ODL",
+ "EN_PP3300_DISP_X",
+ "TCHSCR_RST_1V8_L",
+ "TCHSCR_REPORT_DISABLE",
+ "EN_PP3300_WLAN_X",
+ "BT_KILL_1V8_L",
+ "I2S_SPKR_DATAOUT",
+ "WIFI_KILL_1V8_L",
+ "BEEP_ON",
+ "SCP_I2C_SENSOR_SCL_1V8",
+ "SCP_I2C_SENSOR_SDA_1V8",
+ "",
+ "",
+ "",
+ "",
+ "AUD_CLK_MOSI",
+ "AUD_SYNC_MOSI",
+ "AUD_DAT_MOSI0",
+ "AUD_DAT_MOSI1",
+ "AUD_DAT_MISO0",
+ "AUD_DAT_MISO1",
+ "AUD_DAT_MISO2",
+ "SCP_VREQ_VAO",
+ "AP_SPI_GSC_TPM_CLK",
+ "AP_SPI_GSC_TPM_MOSI",
+ "AP_SPI_GSC_TPM_CS_L",
+ "AP_SPI_GSC_TPM_MISO",
+ "EN_PP1000_CAM_X",
+ "AP_EDP_BKLTEN",
+ "",
+ "USB3_HUB_RST_L",
+ "",
+ "WLAN_ALERT_ODL",
+ "EC_IN_RW_ODL",
+ "GSC_AP_INT_ODL",
+ "HP_INT_ODL",
+ "CAM0_RST_L",
+ "CAM1_RST_L",
+ "TCHSCR_INT_1V8_L",
+ "CAM1_DET_L",
+ "RST_ALC1011_L",
+ "",
+ "",
+ "BL_PWM_1V8",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "EN_SPKR",
+ "AP_EC_WARM_RST_REQ",
+ "UART_SCP_TX_DBGCON_RX",
+ "UART_DBGCON_TX_SCP_RX",
+ "",
+ "",
+ "KPCOL0",
+ "",
+ "MT6315_GPU_INT",
+ "MT6315_PROC_BC_INT",
+ "SD_CMD",
+ "SD_CLK",
+ "SD_DAT0",
+ "SD_DAT1",
+ "SD_DAT2",
+ "SD_DAT3",
+ "EMMC_DAT7",
+ "EMMC_DAT6",
+ "EMMC_DAT5",
+ "EMMC_DAT4",
+ "EMMC_RSTB",
+ "EMMC_CMD",
+ "EMMC_CLK",
+ "EMMC_DAT3",
+ "EMMC_DAT2",
+ "EMMC_DAT1",
+ "EMMC_DAT0",
+ "EMMC_DSL",
+ "",
+ "",
+ "MT6360_INT_ODL",
+ "SCP_JTAG0_TRSTN",
+ "AP_SPI_EC_CS_L",
+ "AP_SPI_EC_CLK",
+ "AP_SPI_EC_MOSI",
+ "AP_SPI_EC_MISO",
+ "SCP_JTAG0_TMS",
+ "SCP_JTAG0_TCK",
+ "SCP_JTAG0_TDO",
+ "SCP_JTAG0_TDI",
+ "AP_SPI_FLASH_CS_L",
+ "AP_SPI_FLASH_CLK",
+ "AP_SPI_FLASH_MOSI",
+ "AP_SPI_FLASH_MISO";
+
+ i2c0_pins: i2c0-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+ <PINMUX_GPIO9__FUNC_SCL0>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c1_pins: i2c1-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+ <PINMUX_GPIO11__FUNC_SCL1>;
+ bias-pull-up = <1000>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c2_pins: i2c2-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+ <PINMUX_GPIO13__FUNC_SCL2>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c3_pins: i2c3-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+ <PINMUX_GPIO15__FUNC_SCL3>;
+ bias-pull-up = <1000>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c4_pins: i2c4-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+ <PINMUX_GPIO17__FUNC_SCL4>;
+ bias-pull-up = <1000>;
+ drive-strength = <4>;
+ };
+ };
+
+ i2c5_pins: i2c5-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO29__FUNC_SCL5>,
+ <PINMUX_GPIO30__FUNC_SDA5>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c7_pins: i2c7-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+ <PINMUX_GPIO28__FUNC_SDA7>;
+ bias-disable;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-ds {
+ pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ nor_pins_default: nor-default-pins {
+ pins-ck-io {
+ pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+ <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+ <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ pins-cs {
+ pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ pio_default: pio-default-pins {
+ pins-wifi-enable {
+ pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
+ output-high;
+ drive-strength = <14>;
+ };
+
+ pins-low-power-pd {
+ pinmux = <PINMUX_GPIO25__FUNC_GPIO25>,
+ <PINMUX_GPIO26__FUNC_GPIO26>,
+ <PINMUX_GPIO46__FUNC_GPIO46>,
+ <PINMUX_GPIO47__FUNC_GPIO47>,
+ <PINMUX_GPIO48__FUNC_GPIO48>,
+ <PINMUX_GPIO65__FUNC_GPIO65>,
+ <PINMUX_GPIO66__FUNC_GPIO66>,
+ <PINMUX_GPIO67__FUNC_GPIO67>,
+ <PINMUX_GPIO68__FUNC_GPIO68>,
+ <PINMUX_GPIO128__FUNC_GPIO128>,
+ <PINMUX_GPIO129__FUNC_GPIO129>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ pins-low-power-pupd {
+ pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+ <PINMUX_GPIO78__FUNC_GPIO78>,
+ <PINMUX_GPIO79__FUNC_GPIO79>,
+ <PINMUX_GPIO80__FUNC_GPIO80>,
+ <PINMUX_GPIO83__FUNC_GPIO83>,
+ <PINMUX_GPIO85__FUNC_GPIO85>,
+ <PINMUX_GPIO90__FUNC_GPIO90>,
+ <PINMUX_GPIO91__FUNC_GPIO91>,
+ <PINMUX_GPIO93__FUNC_GPIO93>,
+ <PINMUX_GPIO94__FUNC_GPIO94>,
+ <PINMUX_GPIO95__FUNC_GPIO95>,
+ <PINMUX_GPIO96__FUNC_GPIO96>,
+ <PINMUX_GPIO104__FUNC_GPIO104>,
+ <PINMUX_GPIO105__FUNC_GPIO105>,
+ <PINMUX_GPIO107__FUNC_GPIO107>;
+ input-enable;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ spi0_pins: spi0-default-pins {
+ pins-cs-mosi-clk {
+ pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+ <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+ <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+ bias-disable;
+ };
+
+ pins-miso {
+ pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+ bias-pull-down;
+ };
+ };
+
+ subpmic_default: subpmic-default-pins {
+ subpmic_pin_irq: pins-subpmic-int-n {
+ pinmux = <PINMUX_GPIO130__FUNC_GPIO130>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ touchscreen_pins: touchscreen-default-pins {
+ pins-int-n {
+ pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ pins-rst {
+ pinmux = <PINMUX_GPIO56__FUNC_GPIO56>;
+ output-high;
+ };
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
+ output-low;
+ };
+ };
+};
+
+&pmic {
+ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ mediatek,pad-select = <0>;
+};
+
+&u3phy0 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&u3phy3 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_vbus>;
+};
+
+&xhci1 {
+ status = "okay";
+
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_vbus>;
+};
+
+&xhci2 {
+ status = "okay";
+
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_vbus>;
+};
+
+&xhci3 {
+ status = "okay";
+
+ /* MT7921's USB Bluetooth has issues with USB2 LPM */
+ usb2-lpm-disable;
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_vbus>;
+};
};
&u3phy0 {
- status="okay";
+ status = "okay";
};
&u3phy1 {
- status="okay";
+ status = "okay";
};
&u3phy2 {
- status="okay";
+ status = "okay";
};
&u3phy3 {
- status="okay";
+ status = "okay";
};
&uart0 {
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-#include <dt-bindings/reset/ti-syscon.h>
/ {
compatible = "mediatek,mt8195";
compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
-
- infracfg_rst: reset-controller {
- compatible = "ti,syscon-reset";
- #reset-cells = <1>;
- ti,reset-bits = <
- 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */
- 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
- 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
- 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */
- >;
- };
+ #reset-cells = <1>;
};
pericfg: syscon@10003000 {
<&apmixedsys CLK_APMIXED_USB1PLL>,
<&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+ wakeup-source;
status = "disabled";
};
<&apmixedsys CLK_APMIXED_USB1PLL>,
<&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+ wakeup-source;
status = "disabled";
};
<&topckgen CLK_TOP_SSUSB_P2_REF>,
<&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
clock-names = "sys_ck", "ref_ck", "xhci_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+ wakeup-source;
status = "disabled";
};
<&topckgen CLK_TOP_SSUSB_P3_REF>,
<&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
clock-names = "sys_ck", "ref_ck", "xhci_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+ wakeup-source;
status = "disabled";
};
status = "disabled";
};
+ efuse: efuse@11c10000 {
+ compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+ reg = <0 0x11c10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u3_tx_imp_p0: usb3-tx-imp@184,1 {
+ reg = <0x184 0x1>;
+ bits = <0 5>;
+ };
+ u3_rx_imp_p0: usb3-rx-imp@184,2 {
+ reg = <0x184 0x2>;
+ bits = <5 5>;
+ };
+ u3_intr_p0: usb3-intr@185 {
+ reg = <0x185 0x1>;
+ bits = <2 6>;
+ };
+ comb_tx_imp_p1: usb3-tx-imp@186,1 {
+ reg = <0x186 0x1>;
+ bits = <0 5>;
+ };
+ comb_rx_imp_p1: usb3-rx-imp@186,2 {
+ reg = <0x186 0x2>;
+ bits = <5 5>;
+ };
+ comb_intr_p1: usb3-intr@187 {
+ reg = <0x187 0x1>;
+ bits = <2 6>;
+ };
+ u2_intr_p0: usb2-intr-p0@188,1 {
+ reg = <0x188 0x1>;
+ bits = <0 5>;
+ };
+ u2_intr_p1: usb2-intr-p1@188,2 {
+ reg = <0x188 0x2>;
+ bits = <5 5>;
+ };
+ u2_intr_p2: usb2-intr-p2@189,1 {
+ reg = <0x189 0x1>;
+ bits = <2 5>;
+ };
+ u2_intr_p3: usb2-intr-p3@189,2 {
+ reg = <0x189 0x2>;
+ bits = <7 5>;
+ };
+ };
+
u3phy2: t-phy@11c40000 {
compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
#address-cells = <1>;
clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
<&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
clock-names = "ref", "da_ref";
+ nvmem-cells = <&comb_intr_p1>,
+ <&comb_rx_imp_p1>,
+ <&comb_tx_imp_p1>;
+ nvmem-cell-names = "intr", "rx_imp", "tx_imp";
#phy-cells = <1>;
};
};
clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
<&topckgen CLK_TOP_SSUSB_PHY_REF>;
clock-names = "ref", "da_ref";
+ nvmem-cells = <&u3_intr_p0>,
+ <&u3_rx_imp_p0>,
+ <&u3_tx_imp_p0>;
+ nvmem-cell-names = "intr", "rx_imp", "tx_imp";
#phy-cells = <1>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- volume-up {
+ key-volume-up {
gpios = <&pio 42 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <115>;
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
gpios = <&pio 43 GPIO_ACTIVE_LOW>;
label = "volume_down";
linux,code = <114>;
&axi {
sfp_eth12: sfp-eth12 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth13: sfp-eth13 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth14: sfp-eth14 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth15: sfp-eth15 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth48: sfp-eth48 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp5>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp5>;
tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth49: sfp-eth49 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp6>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp6>;
tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth50: sfp-eth50 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp7>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp7>;
tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth51: sfp-eth51 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp8>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp8>;
tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth52: sfp-eth52 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp9>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp9>;
tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth53: sfp-eth53 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp10>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp10>;
tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth54: sfp-eth54 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp11>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp11>;
tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth55: sfp-eth55 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp12>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp12>;
tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth56: sfp-eth56 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp13>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp13>;
tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth57: sfp-eth57 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp14>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp14>;
tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth58: sfp-eth58 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp15>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp15>;
tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth59: sfp-eth59 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp16>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp16>;
tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp17>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp17>;
tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp18>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp18>;
tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp19>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp19>;
tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp20>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp20>;
tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
};
};
&axi {
sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
- tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
+ tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
- tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
+ tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
- tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
+ tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
- tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
+ tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gcr: system-controller@f0800000 {
+ compatible = "nuvoton,npcm845-gcr", "syscon";
+ reg = <0x0 0xf0800000 0x0 0x1000>;
+ };
+
+ gic: interrupt-controller@dfff9000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xdfff9000 0x0 0x1000>,
+ <0x0 0xdfffa000 0x0 0x2000>,
+ <0x0 0xdfffc000 0x0 0x2000>,
+ <0x0 0xdfffe000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #address-cells = <0>;
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ };
+ };
+ };
+
+ ahb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ rstc: reset-controller@f0801000 {
+ compatible = "nuvoton,npcm845-reset";
+ reg = <0x0 0xf0801000 0x0 0x78>;
+ #reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
+ };
+
+ clk: clock-controller@f0801000 {
+ compatible = "nuvoton,npcm845-clk";
+ #clock-cells = <1>;
+ reg = <0x0 0xf0801000 0x0 0x1000>;
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0x0 0x0 0xf0000000 0x00300000>,
+ <0xfff00000 0x0 0xfff00000 0x00016000>;
+
+ timer0: timer@8000 {
+ compatible = "nuvoton,npcm845-timer";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x8000 0x1C>;
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clock-names = "refclk";
+ };
+
+ serial0: serial@0 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x0 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial1: serial@1000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x1000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial2: serial@2000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x2000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial3: serial@3000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x3000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial4: serial@4000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x4000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial5: serial@5000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x5000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial6: serial@6000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x6000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@801c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x801c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+
+ watchdog1: watchdog@901c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x901c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+
+ watchdog2: watchdog@a01c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xa01c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/dts-v1/;
+#include "nuvoton-npcm845.dtsi"
+
+/ {
+ model = "Nuvoton npcm845 Development Board (Device Tree)";
+ compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845";
+
+ aliases {
+ serial0 = &serial0;
+ };
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&watchdog1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include "nuvoton-common-npcm8xx.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x2>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x3>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
gpio-keys {
compatible = "gpio-keys";
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <5>;
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
remote-endpoint = <&asrc_in7_ep>;
};
};
+
+ xbar_ope1_in_port: port@70 {
+ reg = <0x70>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@71 {
+ reg = <0x71>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
};
admaif@290f000 {
};
};
+ processing-engine@2908000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
amixer@290bb00 {
status = "okay";
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
GPIO_ACTIVE_LOW>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
GPIO_ACTIVE_LOW>;
<&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
<&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
<&xbar_asrc_in7_port>,
+ <&xbar_ope1_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mixer_out5_port>,
<&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
<&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+ <&ope1_out_port>,
/* I/O */
<&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
<&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
GPIO_ACTIVE_LOW>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
GPIO_ACTIVE_LOW>;
status = "disabled";
};
+ tegra_ope1: processing-engine@2908000 {
+ compatible = "nvidia,tegra186-ope",
+ "nvidia,tegra210-ope";
+ reg = <0x2908000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sound-name-prefix = "OPE1";
+ status = "disabled";
+
+ equalizer@2908100 {
+ compatible = "nvidia,tegra186-peq",
+ "nvidia,tegra210-peq";
+ reg = <0x2908100 0x100>;
+ };
+
+ dynamic-range-compressor@2908200 {
+ compatible = "nvidia,tegra186-mbdrc",
+ "nvidia,tegra210-mbdrc";
+ reg = <0x2908200 0x200>;
+ };
+ };
+
tegra_amixer: amixer@290bb00 {
compatible = "nvidia,tegra186-amixer",
"nvidia,tegra210-amixer";
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ status = "okay";
};
uarta: serial@3100000 {
iommus = <&smmu TEGRA186_SID_HOST1X>;
+ /* Context isolation domains */
+ iommu-map = <
+ 0 &smmu TEGRA186_SID_HOST1X_CTX0 1
+ 1 &smmu TEGRA186_SID_HOST1X_CTX1 1
+ 2 &smmu TEGRA186_SID_HOST1X_CTX2 1
+ 3 &smmu TEGRA186_SID_HOST1X_CTX3 1
+ 4 &smmu TEGRA186_SID_HOST1X_CTX4 1
+ 5 &smmu TEGRA186_SID_HOST1X_CTX5 1
+ 6 &smmu TEGRA186_SID_HOST1X_CTX6 1
+ 7 &smmu TEGRA186_SID_HOST1X_CTX7 1>;
+
dpaux1: dpaux@15040000 {
compatible = "nvidia,tegra186-dpaux";
reg = <0x15040000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x30000000 0x50000>;
+ no-memory-wc;
cpu_bpmp_tx: sram@4e000 {
reg = <0x4e000 0x1000>;
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
- cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
};
/* SDMMC4 (eMMC) */
remote-endpoint = <&asrc_in7_ep>;
};
};
+
+ xbar_ope1_in_port: port@70 {
+ reg = <0x70>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@71 {
+ reg = <0x71>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
};
admaif@290f000 {
};
};
+ processing-engine@2908000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
amixer@290bb00 {
status = "okay";
gpio-keys {
compatible = "gpio-keys";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
GPIO_ACTIVE_LOW>;
<&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
<&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
<&xbar_asrc_in7_port>,
+ <&xbar_ope1_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mixer_out4_port>, <&mixer_out5_port>,
<&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
<&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+ <&ope1_out_port>,
/* BE I/O Ports */
<&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
<&dmic3_port>;
remote-endpoint = <&asrc_in7_ep>;
};
};
+
+ xbar_ope1_in_port: port@70 {
+ reg = <0x70>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@71 {
+ reg = <0x71>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
};
admaif@290f000 {
};
};
+ processing-engine@2908000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
amixer@290bb00 {
status = "okay";
gpio-keys {
compatible = "gpio-keys";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
GPIO_ACTIVE_LOW>;
<&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
<&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
<&xbar_asrc_in7_port>,
+ <&xbar_ope1_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mixer_out5_port>,
<&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
<&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+ <&ope1_out_port>,
/* BE I/O Ports */
<&i2s3_port>, <&i2s5_port>,
<&dmic1_port>, <&dmic2_port>, <&dmic4_port>,
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x40000000>;
- misc@100000 {
+ apbmisc: misc@100000 {
compatible = "nvidia,tegra194-misc";
reg = <0x00100000 0xf000>,
<0x0010f000 0x1000>;
gpio-controller;
};
+ cbb-noc@2300000 {
+ compatible = "nvidia,tegra194-cbb-noc";
+ reg = <0x02300000 0x1000>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ status = "okay";
+ };
+
+ axi2apb: axi2apb@2390000 {
+ compatible = "nvidia,tegra194-axi2apb";
+ reg = <0x2390000 0x1000>,
+ <0x23a0000 0x1000>,
+ <0x23b0000 0x1000>,
+ <0x23c0000 0x1000>,
+ <0x23d0000 0x1000>,
+ <0x23e0000 0x1000>;
+ status = "okay";
+ };
+
ethernet@2490000 {
compatible = "nvidia,tegra194-eqos",
"nvidia,tegra186-eqos",
status = "disabled";
};
+ tegra_ope1: processing-engine@2908000 {
+ compatible = "nvidia,tegra194-ope",
+ "nvidia,tegra210-ope";
+ reg = <0x2908000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sound-name-prefix = "OPE1";
+ status = "disabled";
+
+ equalizer@2908100 {
+ compatible = "nvidia,tegra194-peq",
+ "nvidia,tegra210-peq";
+ reg = <0x2908100 0x100>;
+ };
+
+ dynamic-range-compressor@2908200 {
+ compatible = "nvidia,tegra194-mbdrc",
+ "nvidia,tegra210-mbdrc";
+ reg = <0x2908200 0x200>;
+ };
+ };
+
tegra_amixer: amixer@290bb00 {
compatible = "nvidia,tegra194-amixer",
"nvidia,tegra210-amixer";
};
};
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
reg = <0x03100000 0x40>;
#phy-cells = <0>;
};
+ sce-noc@b600000 {
+ compatible = "nvidia,tegra194-sce-noc";
+ reg = <0xb600000 0x1000>;
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ status = "okay";
+ };
+
+ rce-noc@be00000 {
+ compatible = "nvidia,tegra194-rce-noc";
+ reg = <0xbe00000 0x1000>;
+ interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ status = "okay";
+ };
+
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra194-hsp";
reg = <0x0c150000 0x90000>;
};
+ aon-noc@c600000 {
+ compatible = "nvidia,tegra194-aon-noc";
+ reg = <0xc600000 0x1000>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,apbmisc = <&apbmisc>;
+ status = "okay";
+ };
+
+ bpmp-noc@d600000 {
+ compatible = "nvidia,tegra194-bpmp-noc";
+ reg = <0xd600000 0x1000>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ status = "okay";
+ };
+
iommu@10000000 {
compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
reg = <0x10000000 0x800000>;
interconnect-names = "dma-mem";
iommus = <&smmu TEGRA194_SID_HOST1X>;
+ /* Context isolation domains */
+ iommu-map = <
+ 0 &smmu TEGRA194_SID_HOST1X_CTX0 1
+ 1 &smmu TEGRA194_SID_HOST1X_CTX1 1
+ 2 &smmu TEGRA194_SID_HOST1X_CTX2 1
+ 3 &smmu TEGRA194_SID_HOST1X_CTX3 1
+ 4 &smmu TEGRA194_SID_HOST1X_CTX4 1
+ 5 &smmu TEGRA194_SID_HOST1X_CTX5 1
+ 6 &smmu TEGRA194_SID_HOST1X_CTX6 1
+ 7 &smmu TEGRA194_SID_HOST1X_CTX7 1>;
+
nvdec@15140000 {
compatible = "nvidia,tegra194-nvdec";
reg = <0x15140000 0x00040000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40000000 0x50000>;
+ no-memory-wc;
cpu_bpmp_tx: sram@4e000 {
reg = <0x4e000 0x1000>;
};
};
+ processing-engine@702d8000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
+ processing-engine@702d8400 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope2_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope2_in_ep>;
+ };
+ };
+
+ ope2_out_port: port@1 {
+ reg = <0x1>;
+
+ ope2_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope2_out_ep>;
+ };
+ };
+ };
+ };
+
amixer@702dbb00 {
status = "okay";
remote-endpoint = <&mixer_out5_ep>;
};
};
+
+ xbar_ope1_in_port: port@41 {
+ reg = <0x41>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@42 {
+ reg = <0x42>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
+
+ xbar_ope2_in_port: port@43 {
+ reg = <0x43>;
+
+ xbar_ope2_in_ep: endpoint {
+ remote-endpoint = <&ope2_cif_in_ep>;
+ };
+ };
+
+ port@44 {
+ reg = <0x44>;
+
+ xbar_ope2_out_ep: endpoint {
+ remote-endpoint = <&ope2_cif_out_ep>;
+ };
+ };
};
};
};
<&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
<&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
<&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+ <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mixer_out1_port>, <&mixer_out2_port>,
<&mixer_out3_port>, <&mixer_out4_port>,
<&mixer_out5_port>,
+ <&ope1_out_port>, <&ope2_out_port>,
/* I/O DAP Ports */
<&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
<&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>;
compatible = "gpio-keys";
label = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
compatible = "gpio-keys";
status = "okay";
- power {
+ key-power {
debounce-interval = <30>;
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
label = "Power";
};
};
+ processing-engine@702d8000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
+ processing-engine@702d8400 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope2_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope2_in_ep>;
+ };
+ };
+
+ ope2_out_port: port@1 {
+ reg = <0x1>;
+
+ ope2_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope2_out_ep>;
+ };
+ };
+ };
+ };
+
amixer@702dbb00 {
status = "okay";
remote-endpoint = <&mixer_out5_ep>;
};
};
+
+ xbar_ope1_in_port: port@41 {
+ reg = <0x41>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@42 {
+ reg = <0x42>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
+
+ xbar_ope2_in_port: port@43 {
+ reg = <0x43>;
+
+ xbar_ope2_in_ep: endpoint {
+ remote-endpoint = <&ope2_cif_in_ep>;
+ };
+ };
+
+ port@44 {
+ reg = <0x44>;
+
+ xbar_ope2_out_ep: endpoint {
+ remote-endpoint = <&ope2_cif_out_ep>;
+ };
+ };
};
};
};
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
wakeup-source;
};
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
<&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
<&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
<&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+ <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mixer_out1_port>, <&mixer_out2_port>,
<&mixer_out3_port>, <&mixer_out4_port>,
<&mixer_out5_port>,
+ <&ope1_out_port>, <&ope2_out_port>,
/* I/O DAP Ports */
<&i2s3_port>, <&i2s4_port>,
<&dmic1_port>, <&dmic2_port>;
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- tablet_mode {
+ switch-tablet-mode {
label = "Tablet Mode";
gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
resets = <&tegra_car 142>;
reset-names = "padctl";
- nvidia,pmc = <&tegra_pmc>;
+ nvidia,pmc = <&tegra_pmc>;
status = "disabled";
status = "disabled";
};
+ tegra_ope1: processing-engine@702d8000 {
+ compatible = "nvidia,tegra210-ope";
+ reg = <0x702d8000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sound-name-prefix = "OPE1";
+ status = "disabled";
+
+ equalizer@702d8100 {
+ compatible = "nvidia,tegra210-peq";
+ reg = <0x702d8100 0x100>;
+ };
+
+ dynamic-range-compressor@702d8200 {
+ compatible = "nvidia,tegra210-mbdrc";
+ reg = <0x702d8200 0x200>;
+ };
+ };
+
+ tegra_ope2: processing-engine@702d8400 {
+ compatible = "nvidia,tegra210-ope";
+ reg = <0x702d8400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sound-name-prefix = "OPE2";
+ status = "disabled";
+
+ equalizer@702d8500 {
+ compatible = "nvidia,tegra210-peq";
+ reg = <0x702d8500 0x100>;
+ };
+
+ dynamic-range-compressor@702d8600 {
+ compatible = "nvidia,tegra210-mbdrc";
+ reg = <0x702d8600 0x200>;
+ };
+ };
+
tegra_amixer: amixer@702dbb00 {
compatible = "nvidia,tegra210-amixer";
reg = <0x702dbb00 0x800>;
remote-endpoint = <&asrc_in7_ep>;
};
};
+
+ xbar_ope1_in_port: port@70 {
+ reg = <0x70>;
+
+ xbar_ope1_in_ep: endpoint {
+ remote-endpoint = <&ope1_cif_in_ep>;
+ };
+ };
+
+ port@71 {
+ reg = <0x71>;
+
+ xbar_ope1_out_ep: endpoint {
+ remote-endpoint = <&ope1_cif_out_ep>;
+ };
+ };
};
i2s@2901000 {
};
};
+ processing-engine@2908000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ ope1_cif_in_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_in_ep>;
+ };
+ };
+
+ ope1_out_port: port@1 {
+ reg = <0x1>;
+
+ ope1_cif_out_ep: endpoint {
+ remote-endpoint = <&xbar_ope1_out_ep>;
+ };
+ };
+ };
+ };
+
mvc@290a000 {
status = "okay";
compatible = "gpio-keys";
status = "okay";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <BTN_1>;
};
- power-key {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
wakeup-source;
};
- suspend {
+ key-suspend {
label = "Suspend";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
<&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
<&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
<&xbar_asrc_in7_port>,
+ <&xbar_ope1_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mix_out4_port>, <&mix_out5_port>,
<&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
<&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+ <&ope1_out_port>,
/* BE I/O Ports */
<&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
<&dmic3_port>;
ranges = <0x0 0x0 0x0 0x40000000>;
+ gpcdma: dma-controller@2600000 {
+ compatible = "nvidia,tegra234-gpcdma",
+ "nvidia,tegra194-gpcdma",
+ "nvidia,tegra186-gpcdma";
+ reg = <0x2600000 0x210000>;
+ resets = <&bpmp TEGRA234_RESET_GPCDMA>;
+ reset-names = "gpcdma";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+ dma-coherent;
+ };
+
aconnect@2900000 {
compatible = "nvidia,tegra234-aconnect",
"nvidia,tegra210-aconnect";
status = "disabled";
};
+ tegra_ope1: processing-engine@2908000 {
+ compatible = "nvidia,tegra234-ope",
+ "nvidia,tegra210-ope";
+ reg = <0x2908000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sound-name-prefix = "OPE1";
+ status = "disabled";
+
+ equalizer@2908100 {
+ compatible = "nvidia,tegra234-peq",
+ "nvidia,tegra210-peq";
+ reg = <0x2908100 0x100>;
+ };
+
+ dynamic-range-compressor@2908200 {
+ compatible = "nvidia,tegra234-mbdrc",
+ "nvidia,tegra210-mbdrc";
+ reg = <0x2908200 0x200>;
+ };
+ };
+
tegra_mvc1: mvc@290a000 {
compatible = "nvidia,tegra234-mvc",
"nvidia,tegra210-mvc";
status = "okay";
};
+ timer@2080000 {
+ compatible = "nvidia,tegra234-timer";
+ reg = <0x02080000 0x00121000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ host1x@13e00000 {
+ compatible = "nvidia,tegra234-host1x";
+ reg = <0x13e00000 0x10000>,
+ <0x13e10000 0x10000>,
+ <0x13e40000 0x10000>;
+ reg-names = "common", "hypervisor", "vm";
+ interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4",
+ "syncpt5", "syncpt6", "syncpt7", "host1x";
+ clocks = <&bpmp TEGRA234_CLK_HOST1X>;
+ clock-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15000000 0x15000000 0x01000000>;
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>;
+ interconnect-names = "dma-mem";
+ iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>;
+
+ vic@15340000 {
+ compatible = "nvidia,tegra234-vic";
+ reg = <0x15340000 0x00040000>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_VIC>;
+ clock-names = "vic";
+ resets = <&bpmp TEGRA234_RESET_VIC>;
+ reset-names = "vic";
+
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>;
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso1 TEGRA234_SID_VIC>;
+ dma-coherent;
+ };
+ };
+
gpio: gpio@2200000 {
compatible = "nvidia,tegra234-gpio";
reg-names = "security", "gpio";
status = "okay";
};
+ sce-fabric@b600000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xb600000 0x40000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ rce-fabric@be00000 {
+ compatible = "nvidia,tegra234-rce-fabric";
+ reg = <0xbe00000 0x40000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
reg = <0x0c150000 0x90000>;
interrupt-controller;
};
+ aon-fabric@c600000 {
+ compatible = "nvidia,tegra234-aon-fabric";
+ reg = <0xc600000 0x40000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ bpmp-fabric@d600000 {
+ compatible = "nvidia,tegra234-bpmp-fabric";
+ reg = <0xd600000 0x40000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ dce-fabric@de00000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xde00000 0x40000>;
+ interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
gic: interrupt-controller@f400000 {
compatible = "arm,gic-v3";
reg = <0x0f400000 0x010000>, /* GICD */
nvidia,memory-controller = <&mc>;
status = "okay";
};
+
+ cbb-fabric@13a00000 {
+ compatible = "nvidia,tegra234-cbb-fabric";
+ reg = <0x13a00000 0x400000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
};
ccplex@e000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40000000 0x80000>;
+ no-memory-wc;
cpu_bpmp_tx: sram@70000 {
reg = <0x70000 0x1000>;
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
serial0 = &blsp1_uart2;
serial1 = &blsp1_uart1;
usid0 = &pm8916_0;
- i2c0 = &blsp_i2c2;
- i2c1 = &blsp_i2c6;
- i2c3 = &blsp_i2c4;
- spi0 = &blsp_spi5;
- spi1 = &blsp_spi3;
+ i2c0 = &blsp_i2c2;
+ i2c1 = &blsp_i2c6;
+ i2c3 = &blsp_i2c4;
+ spi0 = &blsp_spi5;
+ spi1 = &blsp_spi3;
};
chosen {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
- button@0 {
+ button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
led@1 {
label = "apq8016-sbc:green:user1";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
led@2 {
label = "apq8016-sbc:green:user2";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
led@3 {
label = "apq8016-sbc:green:user3";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
led@4 {
label = "apq8016-sbc:green:user4";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
led@5 {
label = "apq8016-sbc:yellow:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
led@6 {
label = "apq8016-sbc:blue:bt";
+ function = LED_FUNCTION_BLUETOOTH;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
- usb_hub_reset_pm: usb-hub-reset-pm {
+ usb_hub_reset_pm: usb-hub-reset-pm-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
};
- usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+ usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
- usb_sw_sel_pm: usb-sw-sel-pm {
+ usb_sw_sel_pm: usb-sw-sel-pm-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
};
- usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+ usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
- pm8916_gpios_leds: pm8916-gpios-leds {
+ pm8916_gpios_leds: pm8916-gpios-leds-state {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
serial0 = &blsp2_uart2;
serial1 = &blsp2_uart3;
serial2 = &blsp1_uart2;
- i2c0 = &blsp1_i2c3;
- i2c1 = &blsp2_i2c1;
- i2c2 = &blsp2_i2c1;
- spi0 = &blsp1_spi1;
- spi1 = &blsp2_spi6;
+ i2c0 = &blsp1_i2c3;
+ i2c1 = &blsp2_i2c1;
+ i2c2 = &blsp2_i2c1;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp2_spi6;
};
chosen {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
- button@0 {
+ button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
- ls_exp_gpio_f: pm8994_gpio5 {
+ ls_exp_gpio_f: pm8994-gpio5-state {
pinconf {
pins = "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
- bt_en_gpios: bt_en_gpios {
+ bt_en_gpios: bt-en-pios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
};
};
- wlan_en_gpios: wlan_en_gpios {
+ wlan_en_gpios: wlan-en-gpios-state {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
};
};
- audio_mclk: clk_div1 {
+ audio_mclk: clk-div1-state {
pinconf {
pins = "gpio15";
function = "func1";
};
};
- volume_up_gpio: pm8996_gpio2 {
+ volume_up_gpio: pm8996-gpio2-state {
pinconf {
pins = "gpio2";
function = "normal";
};
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
};
};
- usb3_vbus_det_gpio: pm8996_gpio22 {
+ usb3_vbus_det_gpio: pm8996-gpio22-state {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
"NC",
"NC";
- usb2_vbus_det_gpio: pmi8996_gpio6 {
+ usb2_vbus_det_gpio: pmi8996-gpio6-state {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
};
};
+&pmi8994_lpg {
+ qcom,power-source = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmi8994_mpp2_userled4>;
+
+ qcom,dtest = <0 0>,
+ <0 0>,
+ <0 0>,
+ <4 1>;
+
+ status = "okay";
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <1>;
+
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <0>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <2>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <3>;
+ };
+};
+
+&pmi8994_mpps {
+ pmi8994_mpp2_userled4: mpp2-userled4-state {
+ pins = "mpp2";
+ function = "sink";
+
+ output-low;
+ qcom,dtest = <4>;
+ };
+};
+
&pmi8994_spmi_regulators {
vdd_s2-supply = <&vph_pwr>;
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
- audio-routing = "RX_BIAS", "MCLK",
+ audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
status = "okay";
};
-&i2c_1 {
+&blsp1_i2c3 {
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
};
-&spi_0 {
+&blsp1_spi1 {
cs-select = <0>;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- compatible = "n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <50000000>;
};
};
};
};
- cpu_opp_table: cpu_opp_table {
+ cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
firmware {
scm {
- compatible = "qcom,scm";
+ compatible = "qcom,scm-ipq6018", "qcom,scm";
};
};
status = "disabled";
};
- spi_0: spi@78b5000 {
+ blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- spi_1: spi@78b6000 {
+ blsp1_spi2: spi@78b6000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- i2c_0: i2c@78b6000 {
+ blsp1_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- clock-frequency = <400000>;
+ clock-frequency = <400000>;
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
status = "disabled";
};
- i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
+ blsp1_i2c3: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- clock-frequency = <400000>;
+ clock-frequency = <400000>;
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
dma-names = "tx", "rx";
status = "disabled";
};
timer@b120000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x10000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x0b120000 0x0 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b121000 0x0 0x1000>,
- <0x0 0x0b122000 0x0 0x1000>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xb123000 0x0 0x1000>;
+ reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b124000 0x0 0x1000>;
+ reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b125000 0x0 0x1000>;
+ reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b126000 0x0 0x1000>;
+ reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b127000 0x0 0x1000>;
+ reg = <0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b128000 0x0 0x1000>;
+ reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
glink-edge {
interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
qcom,remote-pid = <1>;
mboxes = <&apcs_glb 8>;
<0x0 0x00078800 0x0 0x1F8>, /* PCS */
<0x0 0x00078600 0x0 0x044>; /* PCS misc */
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
#include "ipq8074.dtsi"
/ {
- #address-cells = <0x2>;
- #size-cells = <0x2>;
model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
- interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart5;
#include "ipq8074.dtsi"
/ {
- #address-cells = <0x2>;
- #size-cells = <0x2>;
-
- interrupt-parent = <&intc>;
-
aliases {
serial0 = &blsp1_uart5;
};
#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
model = "Qualcomm Technologies, Inc. IPQ8074";
compatible = "qcom,ipq8074";
+ interrupt-parent = <&intc>;
clocks {
sleep_clk: sleep_clk {
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
- resets = <&gcc GCC_USB1_PHY_BCR>,
+ resets = <&gcc GCC_USB1_PHY_BCR>,
<&gcc GCC_USB3PHY_1_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
<0x00058800 0x1f8>, /* PCS */
<0x00058600 0x044>; /* PCS misc*/
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb1_pipe_clk_src";
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
- resets = <&gcc GCC_USB0_PHY_BCR>,
+ resets = <&gcc GCC_USB0_PHY_BCR>,
<&gcc GCC_USB3PHY_0_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc*/
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
compatible = "qcom,gcc-ipq8074";
reg = <0x01800000 0x80000>;
#clock-cells = <0x1>;
+ #power-domain-cells = <1>;
#reset-cells = <0x1>;
};
cell-index = <0>;
};
- sdhc_1: sdhci@7824900 {
+ sdhc_1: mmc@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x500>, <0x7824000 0x800>;
reg-names = "hc_mem", "core_mem";
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&xo>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&gcc GCC_SDCC1_APPS_CLK>;
- clock-names = "xo", "iface", "core";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo>;
+ clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC1_BCR>;
max-frequency = <384000000>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
status = "disabled";
};
- qpic_nand: nand@79b0000 {
+ qpic_nand: nand-controller@79b0000 {
compatible = "qcom,ipq8074-nand";
reg = <0x079b0000 0x10000>;
#address-cells = <1>;
<133330000>,
<19200000>;
+ power-domains = <&gcc USB0_GDSC>;
+
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
<133330000>,
<19200000>;
+ power-domains = <&gcc USB1_GDSC>;
+
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
watchdog: watchdog@b017000 {
compatible = "qcom,kpss-wdt";
reg = <0xb017000 0x1000>;
timeout-sec = <30>;
};
+ apcs_glb: mailbox@b111000 {
+ compatible = "qcom,ipq8074-apcs-apps-global";
+ reg = <0x0b111000 0x6000>;
+
+ #clock-cells = <1>;
+ #mbox-cells = <1>;
+ };
+
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
};
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
- volume-down {
+ button-volume-down {
label = "Volume Down";
gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
drive-strength = <2>;
bias-disable;
};
+
+ ts_int_default: ts-int-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
&pm8916_gpios {
- nfc_clk_req: nfc-clk-req {
+ nfc_clk_req: nfc-clk-req-state {
pins = "gpio2";
function = "func1";
drive-strength = <2>;
bias-disable;
};
-
- ts_int_default: ts-int-default {
- pins = "gpio13";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
};
drive-strength = <2>;
bias-disable;
};
-
- ts_int_default: ts-int-default {
- pins = "gpio13";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
};
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home-key {
+ button-home {
label = "Home Key";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
- cpu_opp_table: cpu-opp-table {
+ cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
#clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
};
rpmpd: power-controller {
};
qfprom: qfprom@5c000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
reg = <0x0005c000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
#sound-dai-cells = <1>;
};
- sdhc_1: sdhci@7824000 {
+ sdhc_1: mmc@7824000 {
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
status = "disabled";
};
- sdhc_2: sdhci@7864000 {
+ sdhc_2: mmc@7864000 {
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
bus-width = <4>;
status = "disabled";
};
<&rpmpd MSM8916_VDDMX>;
power-domain-names = "cx", "mx";
- qcom,state = <&wcnss_smp2p_out 0>;
- qcom,state-names = "stop";
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
compatible = "qcom,msm8916-a53pll";
reg = <0x0b016000 0x40>;
#clock-cells = <0>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
};
timer@b020000 {
firmware {
scm: scm {
- compatible = "qcom,scm-msm8953";
+ compatible = "qcom,scm-msm8953", "qcom,scm";
clocks = <&gcc GCC_CRYPTO_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_AHB_CLK>;
};
};
- sdhc_1: sdhci@7824900 {
+ sdhc_1: mmc@7824900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
reg = <0x7824900 0x500>, <0x7824000 0x800>;
};
};
- sdhc_2: sdhci@7864900 {
+ sdhc_2: mmc@7864900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
reg = <0x7864900 0x500>, <0x7864000 0x800>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
compatible = "gpio-keys";
autorepeat;
- volupkey {
+ volup-key {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- camsnapkey {
+ camsnap-key {
label = "Camera Snapshot";
gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- camfocuskey {
+ camfocus-key {
label = "Camera Focus";
gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
label = "GPIO Hall Effect Sensor";
- hall-front-sensor {
+ event-hall-front-sensor {
label = "Hall Effect Front Sensor";
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,can-disable;
};
- hall-back-sensor {
+ event-hall-back-sensor {
label = "Hall Effect Back Sensor";
gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
};
&pm8994_gpios {
- bt_en_gpios: bt_en_gpios {
+ bt_en_gpios: bt-en-gpios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
};
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
* TODO: remove once a driver is available
* TODO: add VBUS GPIO 5
*/
- hd3ss460_pol: pol_low {
+ hd3ss460_pol: pol-low-state {
pins = "gpio8";
- drive-strength = <3>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <3>;
bias-pull-down;
};
- hd3ss460_amsel: amsel_high {
+ hd3ss460_amsel: amsel-high-state {
pins = "gpio9";
- drive-strength = <1>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <1>;
bias-pull-up;
};
- hd3ss460_en: en_high {
+ hd3ss460_en: en-high-state {
pins = "gpio10";
- drive-strength = <1>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <1>;
bias-pull-up;
};
};
/* Kitakami firmware doesn't support PSCI */
/delete-node/ psci;
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Volume Down";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- button@1 {
+ button-1 {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- button@2 {
+ button-2 {
label = "Camera Snapshot";
gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- button@3 {
+ button-3 {
label = "Camera Focus";
gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
};
- sdhc1: sdhci@f9824900 {
+ sdhc1: mmc@f9824900 {
compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
status = "disabled";
};
- sdhc2: sdhci@f98a4900 {
+ sdhc2: mmc@f98a4900 {
compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
<600000000>;
};
- ocmem: ocmem@fdd00000 {
+ ocmem: sram@fdd00000 {
compatible = "qcom,msm8974-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x200000>;
reg-names = "ctrl", "mem";
+ ranges = <0 0xfec00000 0x200000>;
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
clock-names = "core", "iface";
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
- */
-
-#include "msm8996-sony-xperia-tone-dora.dts"
-#include "pmi8996.dtsi"
-
-/ {
- model = "Sony Xperia X Performance (PMI8996)";
-};
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
- */
-
-#include "msm8996-sony-xperia-tone-kagura.dts"
-#include "pmi8996.dtsi"
-
-/ {
- model = "Sony Xperia XZ (PMI8996)";
-};
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
- */
-
-#include "msm8996-sony-xperia-tone-keyaki.dts"
-#include "pmi8996.dtsi"
-
-/ {
- model = "Sony Xperia XZs (PMI8996)";
-};
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
- qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */
qcom,board-id = <8 0>;
chosen {
ecc-size = <16>;
};
- cont_splash_mem: memory@83401000 {
- reg = <0 0x83401000 0 0x23ff000>;
- no-map;
- };
-
adsp_mem: adsp@8ea00000 {
reg = <0x0 0x8ea00000 0x0 0x1a00000>;
no-map;
* probably a reason for it, and just to be on the safe side, we follow suit.
*/
pm8994_gpios_defaults: pm8994-gpios-default-state {
- pm8994-gpio1-nc {
+ pm8994-gpio1-nc-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
bias-high-impedance;
};
- vol-down-n {
+ vol-down-n-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- vol-up-n {
+ vol-up-n-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- camera-snapshot-n {
+ camera-snapshot-n-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- camera-focus-n {
+ camera-focus-n-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio6-nc {
+ pm8994-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- nfc-download {
+ nfc-download-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio8-nc {
+ pm8994-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio9-nc {
+ pm8994-gpio9-nc-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
power-source = <PM8994_GPIO_VPH>;
};
- nfc-clock {
+ nfc-clock-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio11-nc {
+ pm8994-gpio11-nc-pins {
pins = "gpio11";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio12-nc {
+ pm8994-gpio12-nc-pins {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- ear-enable {
+ ear-enable-pins {
pins = "gpio13";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio14-nc {
+ pm8994-gpio14-nc-pins {
pins = "gpio14";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- pm-divclk1-gpio {
+ pm-divclk1-gpio-pins {
pins = "gpio15";
function = "func1";
output-high;
power-source = <PM8994_GPIO_VPH>;
};
- pmi-clk-gpio {
+ pmi-clk-gpio-pins {
pins = "gpio16";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
- pm8994-gpio17-nc {
+ pm8994-gpio17-nc-pins {
pins = "gpio17";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- rome-sleep {
+ rome-sleep-pins {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
output-low;
power-source = <PM8994_GPIO_S4>;
};
- pm8994-gpio19-nc {
+ pm8994-gpio19-nc-pins {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_VPH>;
};
- pm8994-gpio22-nc {
+ pm8994-gpio22-nc-pins {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
"RF_ID";
pm8994_mpps_defaults: pm8994-mpps-default-state {
- lcd-id_adc-mpp {
+ lcd-id_adc-mpp-pins {
pins = "mpp2";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
};
- pm-mpp4-nc {
+ pm-mpp4-nc-pins {
pins = "mpp4";
function = "digital";
bias-high-impedance;
power-source = <PM8994_GPIO_VPH>;
};
- flash-therm-mpp {
+ flash-therm-mpp-pins {
pins = "mpp5";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
};
- mpp6-nc {
+ mpp6-nc-pins {
pins = "mpp6";
function = "digital";
bias-high-impedance;
};
- rf-id-mpp {
+ rf-id-mpp-pins {
pins = "mpp8";
function = "analog";
input-enable;
"NC";
pmi8994_gpios_defaults: pmi8994-gpios-default-state {
- vib-ldo-en-gpio {
+ vib-ldo-en-gpio-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio2-nc {
+ pmi-gpio2-nc-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- pmi-gpio3-nc {
+ pmi-gpio3-nc-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_VPH>;
};
- pmi-gpio4-nc {
+ pmi-gpio4-nc-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio5-nc {
+ pmi-gpio5-nc-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio6-nc {
+ pmi-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio7-nc {
+ pmi-gpio7-nc-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- pmi-gpio8-nc {
+ pmi-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
power-source = <PM8994_GPIO_S4>;
};
- usb-switch-sel {
+ usb-switch-sel-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
- pmi-gpio10-nc {
+ pmi-gpio10-nc-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol_up {
+ key-vol-up {
label = "Volume Up";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
- dome {
+ key-dome {
label = "Home";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
&pm8994_gpios {
- wlan_en_default: wlan-en-default {
+ wlan_en_default: wlan-en-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
bias-disable;
};
- rome_enable_default: rome-enable-default {
+ rome_enable_default: rome-enable-state {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
power-source = <PM8994_GPIO_VPH>;
};
- divclk1_default: divclk1_default {
+ divclk1_default: divclk1-state {
pins = "gpio15";
function = PMIC_GPIO_FUNC_FUNC1;
bias-disable;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- divclk4_pin_a: divclk4 {
+ divclk4_pin_a: divclk4-state {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
&sound {
compatible = "qcom,apq8096-sndcard";
model = "gemini";
- audio-routing = "RX_BIAS", "MCLK",
+ audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
"UIM_BATT_ALARM", /* GPIO_21 */
"NC"; /* GPIO_22 */
- divclk2_pin_a: divclk2 {
+ divclk2_pin_a: divclk2-state {
pins = "gpio16";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
+ */
+
+/dts-v1/;
+
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+ model = "Xiaomi Mi 5s Plus";
+ compatible = "xiaomi,natrium", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,msm-id = <305 0x10000>;
+ qcom,board-id = <47 0>;
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/natrium/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vdd_3v2_tp>;
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <5>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-1 = <&touchscreen_sleep>;
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l28a_0p925>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+ panel: panel@0 {
+ compatible = "jdi,fhd-r63452";
+ reg = <0>;
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ backlight = <&pmi8994_wled>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/natrium/mba.mbn",
+ "qcom/msm8996/natrium/modem.mbn";
+};
+
+&pmi8994_wled {
+ status = "okay";
+
+ qcom,enabled-strings = <0 1>;
+ qcom,switching-freq = <600>;
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/natrium/slpi.mbn";
+};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "natrium";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 6>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 1>;
+ };
+ };
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/natrium/venus.mbn";
+};
+
+&rpm_requests {
+ pm8994-regulators {
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ vreg_l11a_1p1: l11 {
+ regulator-name = "vreg_l11a_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l18a_2p8: l18 {
+ regulator-name = "vreg_l18a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&pm8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "VOL_UP_N", /* GPIO_2 */
+ "SPKR_ID", /* GPIO_3 */
+ "PWM_HAPTICS", /* GPIO_4 */
+ "INFARED_DRV", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "KEYPAD_LED_EN_A", /* GPIO_7 */
+ "WL_EN", /* GPIO_8 */
+ "3P3_ENABLE", /* GPIO_9 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "NC", /* GPIO_12 */
+ "NC", /* GPIO_13 */
+ "NC", /* GPIO_14 */
+ "DIVCLK1_CDC", /* GPIO_15 */
+ "DIVCLK2_HAPTICS", /* GPIO_16 */
+ "NC", /* GPIO_17 */
+ "32KHz_CLK_IN", /* GPIO_18 */
+ "BT_EN", /* GPIO_19 */
+ "PMIC_SLB", /* GPIO_20 */
+ "UIM_BATT_ALARM", /* GPIO_21 */
+ "NC"; /* GPIO_22 */
+};
+
+&pm8994_mpps {
+ gpio-line-names =
+ "NC", /* MPP_1 */
+ "CCI_TIMER1", /* MPP_2 */
+ "PMIC_SLB", /* MPP_3 */
+ "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+ "NC", /* MPP_5 */
+ "NC", /* MPP_6 */
+ "NC", /* MPP_7 */
+ "NC"; /* MPP_8 */
+};
+
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "SPKR_PA_EN", /* GPIO_2 */
+ "NC", /* GPIO_3 */
+ "NC", /* GPIO_4 */
+ "NC", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "NC", /* GPIO_7 */
+ "NC", /* GPIO_8 */
+ "NC", /* GPIO_9 */
+ "NC"; /* GPIO_10 */
+};
+
+&tlmm {
+ gpio-line-names =
+ "ESE_SPI_MOSI", /* GPIO_0 */
+ "ESE_SPI_MISO", /* GPIO_1 */
+ "NC", /* GPIO_2 */
+ "ESE_SPI_CLK", /* GPIO_3 */
+ "MSM_UART_TX", /* GPIO_4 */
+ "MSM_UART_RX", /* GPIO_5 */
+ "NFC_I2C_SDA", /* GPIO_6 */
+ "NFC_I2C_SCL", /* GPIO_7 */
+ "LCD0_RESET_N", /* GPIO_8 */
+ "NFC_IRQ", /* GPIO_9 */
+ "LCD_TE", /* GPIO_10 */
+ "LCD_ID_DET1", /* GPIO_11 */
+ "NFC_DISABLE", /* GPIO_12 */
+ "CAM_MCLK0", /* GPIO_13 */
+ "CAM_MCLK1", /* GPIO_14 */
+ "CAM_MCLK2", /* GPIO_15 */
+ "ESE_PWR_REQ", /* GPIO_16 */
+ "CCI_I2C_SDA0", /* GPIO_17 */
+ "CCI_I2C_SCL0", /* GPIO_18 */
+ "CCI_I2C_SDA1", /* GPIO_19 */
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "NFC_DWL_REQ", /* GPIO_21 */
+ "CCI_TIMER1", /* GPIO_22 */
+ "WEBCAM1_RESET_N", /* GPIO_23 */
+ "ESE_IRQ", /* GPIO_24 */
+ "NC", /* GPIO_25 */
+ "WEBCAM1_STANDBY", /* GPIO_26 */
+ "NC", /* GPIO_27 */
+ "NC", /* GPIO_28 */
+ "NC", /* GPIO_29 */
+ "CAM_VDD_1P2_EN_2", /* GPIO_30 */
+ "CAM_RESET_0", /* GPIO_31 */
+ "CAM_RESET_1", /* GPIO_32 */
+ "NC", /* GPIO_33 */
+ "NC", /* GPIO_34 */
+ "PCI_E0_RST_N", /* GPIO_35 */
+ "PCI_E0_CLKREQ_N", /* GPIO_36 */
+ "PCI_E0_WAKE", /* GPIO_37 */
+ "CHARGER_INT", /* GPIO_38 */
+ "CHARGER_RESET", /* GPIO_39 */
+ "NC", /* GPIO_40 */
+ "QCA_UART_TXD", /* GPIO_41 */
+ "QCA_UART_RXD", /* GPIO_42 */
+ "QCA_UART_CTS", /* GPIO_43 */
+ "QCA_UART_RTS", /* GPIO_44 */
+ "MAWC_UART_TX", /* GPIO_45 */
+ "MAWC_UART_RX", /* GPIO_46 */
+ "NC", /* GPIO_47 */
+ "NC", /* GPIO_48 */
+ "NC", /* GPIO_49 */
+ "FP_SPI_RST", /* GPIO_50 */
+ "TYPEC_I2C_SDA", /* GPIO_51 */
+ "TYPEC_I2C_SCL", /* GPIO_52 */
+ "CODEC_INT2_N", /* GPIO_53 */
+ "CODEC_INT1_N", /* GPIO_54 */
+ "APPS_I2C7_SDA", /* GPIO_55 */
+ "APPS_I2C7_SCL", /* GPIO_56 */
+ "FORCE_USB_BOOT", /* GPIO_57 */
+ "NC", /* GPIO_58 */
+ "NC", /* GPIO_59 */
+ "NC", /* GPIO_60 */
+ "NC", /* GPIO_61 */
+ "ESE_RSTN", /* GPIO_62 */
+ "TYPEC_INT", /* GPIO_63 */
+ "CODEC_RESET_N", /* GPIO_64 */
+ "PCM_CLK", /* GPIO_65 */
+ "PCM_SYNC", /* GPIO_66 */
+ "PCM_DIN", /* GPIO_67 */
+ "PCM_DOUT", /* GPIO_68 */
+ "CDC_44K1_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "LDO_5V_IN_EN", /* GPIO_73 */
+ "TYPEC_EN_N", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "NC", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "NC", /* GPIO_79 */
+ "SENSOR_RESET_N", /* GPIO_80 */
+ "FP_SPI_MOSI", /* GPIO_81 */
+ "FP_SPI_MISO", /* GPIO_82 */
+ "FP_SPI_CS_N", /* GPIO_83 */
+ "FP_SPI_CLK", /* GPIO_84 */
+ "NC", /* GPIO_85 */
+ "CAM_VDD_1P2_EN", /* GPIO_86 */
+ "MSM_TS_I2C_SDA", /* GPIO_87 */
+ "MSM_TS_I2C_SCL", /* GPIO_88 */
+ "TS_RESOUT_N", /* GPIO_89 */
+ "ESE_SPI_CS_N", /* GPIO_90 */
+ "NC", /* GPIO_91 */
+ "CAM2_AVDD_EN", /* GPIO_92 */
+ "CAM2_VCM_EN", /* GPIO_93 */
+ "NC", /* GPIO_94 */
+ "NC", /* GPIO_95 */
+ "NC", /* GPIO_96 */
+ "GRFC_0", /* GPIO_97 */
+ "GRFC_1", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "GRFC_3", /* GPIO_100 */
+ "GRFC_4", /* GPIO_101 */
+ "GRFC_5", /* GPIO_102 */
+ "NC", /* GPIO_103 */
+ "GRFC_7", /* GPIO_104 */
+ "UIM2_DATA", /* GPIO_105 */
+ "UIM2_CLK", /* GPIO_106 */
+ "UIM2_RESET", /* GPIO_107 */
+ "UIM2_PRESENT", /* GPIO_108 */
+ "UIM1_DATA", /* GPIO_109 */
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RESET", /* GPIO_111 */
+ "UIM1_PRESENT", /* GPIO_112 */
+ "UIM_BATT_ALARM", /* GPIO_113 */
+ "GRFC_8", /* GPIO_114 */
+ "GRFC_9", /* GPIO_115 */
+ "TX_GTR_THRES", /* GPIO_116 */
+ "ACCEL_INT", /* GPIO_117 */
+ "GYRO_INT", /* GPIO_118 */
+ "COMPASS_INT", /* GPIO_119 */
+ "PROXIMITY_INT_N", /* GPIO_120 */
+ "FP_IRQ", /* GPIO_121 */
+ "P_SENSE", /* GPIO_122 */
+ "HALL_INTR2", /* GPIO_123 */
+ "HALL_INTR1", /* GPIO_124 */
+ "TS_INT_N", /* GPIO_125 */
+ "NC", /* GPIO_126 */
+ "GRFC_11", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "EXT_GPS_LNA_EN", /* GPIO_129 */
+ "NC", /* GPIO_130 */
+ "LCD_ID_DET2", /* GPIO_131 */
+ "LCD_TE2", /* GPIO_132 */
+ "GRFC_14", /* GPIO_133 */
+ "GSM_TX2_PHASE_D", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "GRFC_15", /* GPIO_136 */
+ "RFFE3_DATA", /* GPIO_137 */
+ "RFFE3_CLK", /* GPIO_138 */
+ "NC", /* GPIO_139 */
+ "NC", /* GPIO_140 */
+ "RFFE5_DATA", /* GPIO_141 */
+ "RFFE5_CLK", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "COEX_UART_TX", /* GPIO_144 */
+ "COEX_UART_RX", /* GPIO_145 */
+ "RFFE2_DATA", /* GPIO_146 */
+ "RFFE2_CLK", /* GPIO_147 */
+ "RFFE1_DATA", /* GPIO_148 */
+ "RFFE1_CLK"; /* GPIO_149 */
+
+ touchscreen_default: touchscreen-default {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ touchscreen_sleep: touchscreen-sleep {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "scorpio";
- audio-routing = "RX_BIAS", "MCLK";
+ audio-routing = "RX_BIAS", "MCLK";
mm1-dai-link {
link-name = "MultiMedia1";
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8996.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
firmware {
scm {
- compatible = "qcom,scm-msm8996";
+ compatible = "qcom,scm-msm8996", "qcom,scm";
qcom,dload-mode = <&tcsr 0x13000>;
};
};
rpmcc: qcom,rpmcc {
compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
#clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
};
rpmpd: power-controller {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pcie_phy: phy@34000 {
+ pcie_phy: phy-wrapper@34000 {
compatible = "qcom,msm8996-qmp-pcie-phy";
reg = <0x00034000 0x488>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x00034000 0x4000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
<&gcc GCC_PCIE_PHY_COM_BCR>,
<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
reset-names = "phy", "common", "cfg";
+
status = "disabled";
- pciephy_0: phy@35000 {
- reg = <0x00035000 0x130>,
- <0x00035200 0x200>,
- <0x00035400 0x1dc>;
- #phy-cells = <0>;
+ pciephy_0: phy@1000 {
+ reg = <0x1000 0x130>,
+ <0x1200 0x200>,
+ <0x1400 0x1dc>;
- #clock-cells = <1>;
- clock-output-names = "pcie_0_pipe_clk_src";
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "lane0";
- };
- pciephy_1: phy@36000 {
- reg = <0x00036000 0x130>,
- <0x00036200 0x200>,
- <0x00036400 0x1dc>;
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk_src";
+
#phy-cells = <0>;
+ };
+
+ pciephy_1: phy@2000 {
+ reg = <0x2000 0x130>,
+ <0x2200 0x200>,
+ <0x2400 0x1dc>;
- clock-output-names = "pcie_1_pipe_clk_src";
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "pipe1";
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "lane1";
- };
- pciephy_2: phy@37000 {
- reg = <0x00037000 0x130>,
- <0x00037200 0x200>,
- <0x00037400 0x1dc>;
+ #clock-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk_src";
+
#phy-cells = <0>;
+ };
+
+ pciephy_2: phy@3000 {
+ reg = <0x3000 0x130>,
+ <0x3200 0x200>,
+ <0x3400 0x1dc>;
- clock-output-names = "pcie_2_pipe_clk_src";
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "pipe2";
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "lane2";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_2_pipe_clk_src";
+
+ #phy-cells = <0>;
};
};
};
qfprom@74000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
reg = <0x00074000 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&rpmcc RPM_SMD_BB_CLK1>,
<&rpmcc RPM_SMD_LN_BB_CLK>,
- <&sleep_clk>;
- clock-names = "cxo", "cxo2", "sleep_clk";
+ <&sleep_clk>,
+ <&pciephy_0>,
+ <&pciephy_1>,
+ <&pciephy_2>,
+ <&ssusb_phy_0>,
+ <0>, <0>, <0>;
+ clock-names = "cxo",
+ "cxo2",
+ "sleep_clk",
+ "pcie_0_pipe_clk_src",
+ "pcie_1_pipe_clk_src",
+ "pcie_2_pipe_clk_src",
+ "usb3_phy_pipe_clk_src",
+ "ufs_rx_symbol_0_clk_src",
+ "ufs_rx_symbol_1_clk_src",
+ "ufs_tx_symbol_0_clk_src";
+ };
+
+ bimc: interconnect@408000 {
+ compatible = "qcom,msm8996-bimc";
+ reg = <0x00408000 0x5a000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens0: thermal-sensor@4a9000 {
dma-names = "rx", "tx";
};
+ cnoc: interconnect@500000 {
+ compatible = "qcom,msm8996-cnoc";
+ reg = <0x00500000 0x1000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
+ snoc: interconnect@524000 {
+ compatible = "qcom,msm8996-snoc";
+ reg = <0x00524000 0x1c000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ a0noc: interconnect@543000 {
+ compatible = "qcom,msm8996-a0noc";
+ reg = <0x00543000 0x6000>;
+ #interconnect-cells = <1>;
+ clock-names = "aggre0_snoc_axi",
+ "aggre0_cnoc_ahb",
+ "aggre0_noc_mpu_cfg";
+ clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+ <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+ <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ };
+
+ a1noc: interconnect@562000 {
+ compatible = "qcom,msm8996-a1noc";
+ reg = <0x00562000 0x5000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
+ <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
+ };
+
+ a2noc: interconnect@583000 {
+ compatible = "qcom,msm8996-a2noc";
+ reg = <0x00583000 0x7000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+ };
+
+ mnoc: interconnect@5a4000 {
+ compatible = "qcom,msm8996-mnoc";
+ reg = <0x005a4000 0x1c000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a", "iface";
+ clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
+ <&rpmcc RPM_SMD_MMAXI_A_CLK>,
+ <&mmcc AHB_CLK_SRC>;
+ };
+
+ pnoc: interconnect@5c0000 {
+ compatible = "qcom,msm8996-pnoc";
+ reg = <0x005c0000 0x3000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
reg = <0x00740000 0x40000>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x008c0000 0x40000>;
+ clocks = <&xo_board>,
+ <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
+ <&gcc GPLL0>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "gcc_mmss_noc_cfg_ahb_clk",
+ "gpll0",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte",
+ "hdmipll";
assigned-clocks = <&mmcc MMPLL9_PLL>,
<&mmcc MMPLL1_PLL>,
<&mmcc MMPLL3_PLL>,
interrupt-controller;
#interrupt-cells = <1>;
- clocks = <&mmcc MDSS_AHB_CLK>;
- clock-names = "iface";
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface", "core";
#address-cells = <1>;
#size-cells = <1>;
assigned-clock-rates = <300000000>,
<19200000>;
+ interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+ <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
+ <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&dsi0_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ mdp5_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
};
};
"core_mmss",
"pixel",
"core";
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
phys = <&dsi0_phy>;
phy-names = "dsi";
status = "disabled";
};
+ dsi1: dsi@996000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x00996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&mdp5_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@996400 {
+ compatible = "qcom,dsi-phy-14nm";
+ reg = <0x00996400 0x100>,
+ <0x00996500 0x300>,
+ <0x00996800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+ clock-names = "iface", "ref";
+ status = "disabled";
+ };
+
hdmi: hdmi-tx@9a0000 {
compatible = "qcom,hdmi-tx-8996";
reg = <0x009a0000 0x50c>,
"extp";
phys = <&hdmi_phy>;
- phy-names = "hdmi_phy";
#sound-dai-cells = <1>;
status = "disabled";
"mem",
"mem_iface";
+ interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
+ interconnect-names = "gfx-mem";
+
power-domains = <&mmcc GPU_GX_GDSC>;
iommus = <&adreno_smmu 0>;
#cooling-cells = <2>;
gpu_opp_table: opp-table {
- compatible ="operating-points-v2";
+ compatible = "operating-points-v2";
/*
* 624Mhz and 560Mhz are only available on speed
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
- clock-names = "pipe",
+ clock-names = "pipe",
"aux",
"cfg",
"bus_master",
bus-range = <0x00 0xff>;
num-lanes = <1>;
- status = "disabled";
+ status = "disabled";
reg = <0x00608000 0x2000>,
<0x0d000000 0xf1d>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
- clock-names = "pipe",
+ clock-names = "pipe",
"aux",
"cfg",
"bus_master",
<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
- clock-names = "pipe",
+ clock-names = "pipe",
"aux",
"cfg",
"bus_master",
<&mmcc VIDEO_AXI_CLK>,
<&mmcc VIDEO_MAXI_CLK>;
clock-names = "core", "iface", "bus", "mbus";
+ interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
+ <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
+ interconnect-names = "video-mem", "cpu-cfg";
iommus = <&venus_smmu 0x00>,
<&venus_smmu 0x01>,
<&venus_smmu 0x0a>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <120000000>;
+ interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
+ <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
<0x07410600 0x1a8>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clock-output-names = "usb3_phy_pipe_clk_src";
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
status = "disabled";
};
- sdhc1: sdhci@7464900 {
+ sdhc1: mmc@7464900 {
compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07464900 0x11c>, <0x07464000 0x800>;
reg-names = "hc_mem", "core_mem";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_BB_CLK1>;
+ resets = <&gcc GCC_SDCC1_BCR>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_state_on>;
status = "disabled";
};
- sdhc2: sdhci@74a4900 {
+ sdhc2: mmc@74a4900 {
compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
reg-names = "hc_mem", "core_mem";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_BB_CLK1>;
+ resets = <&gcc GCC_SDCC2_BCR>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_state_on>;
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0x09184000 0x32000>;
- num-channels = <31>;
+ num-channels = <31>;
interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
reg = <0x091c0000 0x2C000>;
reg-names = "ctrl";
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&slimbam 3>, <&slimbam 4>,
+ dmas = <&slimbam 3>, <&slimbam 4>,
<&slimbam 5>, <&slimbam 6>;
dma-names = "rx", "tx", "tx2", "rx2";
#address-cells = <1>;
tasha_ifd: tas-ifd {
compatible = "slim217,1a0";
- reg = <0 0>;
+ reg = <0 0>;
};
wcd9335: codec@1{
pinctrl-names = "default";
compatible = "slim217,1a0";
- reg = <1 0>;
+ reg = <1 0>;
interrupt-parent = <&tlmm>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr1", "intr2";
+ interrupt-names = "intr1", "intr2";
interrupt-controller;
#interrupt-cells = <1>;
reset-gpios = <&tlmm 64 0>;
- slim-ifc-dev = <&tasha_ifd>;
+ slim-ifc-dev = <&tasha_ifd>;
#sound-dai-cells = <1>;
};
touchpad@15 {
compatible = "hid-over-i2c";
- interrupt-parent = <&tlmm>;
- interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>;
reg = <0x15>;
- hid-descr-addr = <0x0001>;
-
pinctrl-names = "default";
pinctrl-0 = <&touchpad>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <123 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x0001>;
};
keyboard@3a {
compatible = "hid-over-i2c";
- interrupt-parent = <&tlmm>;
- interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>;
reg = <0x3a>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <37 IRQ_TYPE_LEVEL_LOW>;
+
hid-descr-addr = <0x0001>;
};
};
&sdhc2 {
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
};
-
-&tlmm {
- touchpad: touchpad {
- config {
- pins = "gpio123";
- bias-pull-up;
- };
- };
-};
*/
#include "msm8998.dtsi"
-#include "pm8998.dtsi"
#include "pm8005.dtsi"
+#include "pm8998.dtsi"
/ {
- chosen {
- };
-
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
};
};
+&blsp1_uart3_on {
+ rx {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-up on 45 (RX). This is needed to
+ * avoid garbage data when the TX pin of the Bluetooth
+ * module is in tri-state (module powered off or not
+ * driving the signal yet).
+ */
+ bias-pull-up;
+ };
+
+ cts {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-down on 47 (CTS) to match the pull
+ * of the Bluetooth module.
+ */
+ bias-pull-down;
+ };
+};
+
/*
* The laptop FW does not appear to support the retention state as it is
* not advertised as enabled in ACPI, and enabling it in DT can cause boot
cpu-idle-states = <&BIG_CPU_SLEEP_1>;
};
+/*
+ * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned
+ * up, because as far as Linux is concerned - they are unused. Disable it by default
+ * on clamshell devices, as it will break them, unless either simplefb is configured to
+ * hold a vote for these clocks, or panels are brought up properly, using drm/msm.
+ */
+&mmcc {
+ status = "disabled";
+};
+
+&mmss_smmu {
+ status = "disabled";
+};
+
&pcie0 {
status = "okay";
};
status = "okay";
};
-&pm8005_lsid1 {
- pm8005-regulators {
- compatible = "qcom,pm8005-regulators";
+&pm8005_regulators {
+ vdd_s1-supply = <&vph_pwr>;
- vdd_s1-supply = <&vph_pwr>;
+ pm8005_s1: s1 { /* VDD_GFX supply */
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <500>;
- pm8005_s1: s1 { /* VDD_GFX supply */
- regulator-min-microvolt = <524000>;
- regulator-max-microvolt = <1100000>;
- regulator-enable-ramp-delay = <500>;
-
- /* hack until we rig up the gpu consumer */
- regulator-always-on;
- };
+ /* hack until we rig up the gpu consumer */
+ regulator-always-on;
};
};
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
};
+
vreg_s4a_1p8: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
+
vreg_s5a_2p04: s5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2040000>;
};
+
vreg_s7a_1p025: s7 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1028000>;
};
+
vreg_l1a_0p875: l1 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-allow-set-load;
};
+
vreg_l2a_1p2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
+
vreg_l3a_1p0: l3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
+
vreg_l5a_0p8: l5 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
+
vreg_l6a_1p8: l6 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <1808000>;
};
+
vreg_l7a_1p8: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
+
vreg_l8a_1p2: l8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
vreg_l9a_1p8: l9 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l10a_1p8: l10 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l11a_1p0: l11 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
+
vreg_l12a_1p8: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
vreg_l13a_2p95: l13 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l14a_1p88: l14 {
regulator-min-microvolt = <1880000>;
regulator-max-microvolt = <1880000>;
};
+
vreg_l15a_1p8: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
vreg_l16a_2p7: l16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
};
+
vreg_l17a_1p3: l17 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-allow-set-load;
};
+
vreg_l18a_2p7: l18 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
};
+
vreg_l19a_3p0: l19 {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
};
+
vreg_l20a_2p95: l20 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-allow-set-load;
};
+
vreg_l21a_2p95: l21 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-allow-set-load;
regulator-system-load = <800000>;
};
+
vreg_l22a_2p85: l22 {
regulator-min-microvolt = <2864000>;
regulator-max-microvolt = <2864000>;
};
+
vreg_l23a_3p3: l23 {
regulator-min-microvolt = <3312000>;
regulator-max-microvolt = <3312000>;
};
+
vreg_l24a_3p075: l24 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
};
+
vreg_l25a_3p3: l25 {
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3312000>;
regulator-allow-set-load;
};
+
vreg_l26a_1p2: l26 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
vreg_l28_3p0: l28 {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
-
};
};
status = "okay";
};
-&tlmm {
- gpio-reserved-ranges = <0 4>, <81 4>;
-
- touchpad: touchpad {
- config {
- pins = "gpio123";
- bias-pull-up; /* pull up */
- };
- };
-};
-
&sdhc2 {
status = "okay";
vqmmc-supply = <&vreg_l13a_2p95>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ pinctrl-0 = <&sdc2_on &sdc2_cd>;
+ pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ touchpad: touchpad-pin {
+ pins = "gpio123";
+ bias-pull-up;
+ };
};
&ufshc {
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
};
-
-/* PINCTRL - board-specific pinctrl */
-&blsp1_uart3_on {
- rx {
- /delete-property/ bias-disable;
- /*
- * Configure a pull-up on 45 (RX). This is needed to
- * avoid garbage data when the TX pin of the Bluetooth
- * module is in tri-state (module powered off or not
- * driving the signal yet).
- */
- bias-pull-up;
- };
-
- cts {
- /delete-property/ bias-disable;
- /*
- * Configure a pull-down on 47 (CTS) to match the pull
- * of the Bluetooth module.
- */
- bias-pull-down;
- };
-};
/dts-v1/;
-#include "msm8998-mtp.dtsi"
-
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
/ {
model = "F(x)tec Pro1 (QX1000)";
chassis-type = "handset";
qcom,board-id = <0x02000b 0x10>;
+ aliases {
+ serial0 = &blsp2_uart1;
+ serial1 = &blsp1_uart3;
+ };
+
/*
* Until we hook up type-c detection, we
* have to stick with this. But it works.
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor1_default>;
- hall-sensor1 {
+ event-hall-sensor1 {
label = "Keyboard Hall Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
debounce-interval = <15>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_kb_pins_extra>;
- home {
+ key-home {
label = "Home";
gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
linux,can-disable;
};
- super-l {
+ key-super-l {
label = "Super Left";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
linux,code = <KEY_FN>;
linux,can-disable;
};
- super-r {
+ key-super-r {
label = "Super Right";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
linux,code = <KEY_FN>;
linux,can-disable;
};
- shift {
+ key-shift {
label = "Shift";
gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RIGHTSHIFT>;
linux,can-disable;
};
- ctrl {
+ key-ctrl {
label = "Ctrl";
gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFTCTRL>;
linux,can-disable;
};
- alt {
+ key-alt {
label = "Alt";
gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFTALT>;
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
- vol-up {
+ button-vol-up {
label = "Volume Up";
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
debounce-interval = <15>;
};
- camera-snapshot {
+ button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
debounce-interval = <15>;
};
- camera-focus {
+ button-camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
keyboard-leds {
compatible = "gpio-leds";
- backlight {
+ led-0 {
color = <LED_COLOR_ID_WHITE>;
default-state = "off";
function = LED_FUNCTION_KBD_BACKLIGHT;
retain-state-suspended;
};
- caps-lock {
+ led-1 {
color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
function = LED_FUNCTION_CAPSLOCK;
pinctrl-0 = <&ts_vio_default>;
regulator-always-on;
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&blsp1_uart3_on {
+ rx {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-up on 45 (RX). This is needed to
+ * avoid garbage data when the TX pin of the Bluetooth
+ * module is in tri-state (module powered off or not
+ * driving the signal yet).
+ */
+ bias-pull-up;
+ };
+
+ cts {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-down on 47 (CTS) to match the pull
+ * of the Bluetooth module.
+ */
+ bias-pull-down;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
};
&blsp2_i2c1 {
- status = "ok";
+ status = "okay";
touchscreen@14 {
compatible = "goodix,gt9286";
};
};
-&mmcc {
- status = "ok";
+&etf {
+ status = "okay";
+};
+
+&etm1 {
+ status = "okay";
+};
+
+&etm2 {
+ status = "okay";
+};
+
+&etm3 {
+ status = "okay";
+};
+
+&etm4 {
+ status = "okay";
+};
+
+&etm5 {
+ status = "okay";
+};
+
+&etm6 {
+ status = "okay";
+};
+
+&etm7 {
+ status = "okay";
+};
+
+&etm8 {
+ status = "okay";
+};
+
+&etr {
+ status = "okay";
};
-&mmss_smmu {
- status = "ok";
+&funnel1 {
+ status = "okay";
+};
+
+&funnel2 {
+ status = "okay";
+};
+
+&funnel3 {
+ status = "okay";
+};
+
+&funnel4 {
+ // FIXME: Figure out why clock late_initcall crashes the board with
+ // this enabled.
+ // status = "okay";
+};
+
+&funnel5 {
+ // FIXME: Figure out why clock late_initcall crashes the board with
+ // this enabled.
+ // status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pm8005_regulators {
+ vdd_s1-supply = <&vph_pwr>;
+
+ pm8005_s1: s1 { /* VDD_GFX supply */
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <500>;
+
+ /* Hack until we rig up the gpu consumer */
+ regulator-always-on;
+ };
};
&pm8998_gpio {
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active {
+ cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = "normal";
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active {
+ cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = "normal";
bias-pull-up;
};
};
+&qusb2phy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-system-load = <800000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
+
+&remoteproc_adsp {
+ status = "okay";
+};
+
+&remoteproc_mss {
+ status = "okay";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>;
};
};
+&sdhc2 {
+ status = "okay";
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on &sdc2_cd>;
+ pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+ status = "okay";
+};
+
&ufshc {
- status = "ok";
+ status = "okay";
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l26a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vcc-max-microamp = <750000>;
+ vccq-max-microamp = <560000>;
+ vccq2-max-microamp = <750000>;
};
&ufsphy {
- status = "ok";
+ status = "okay";
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+ status = "okay";
};
&usb3_dwc3 {
extcon = <&extcon_usb>;
};
+&usb3phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
/* GT9286 analog supply */
&vreg_l28_3p0 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
keyboard@3a {
compatible = "hid-over-i2c";
- interrupt-parent = <&tlmm>;
- interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
reg = <0x3a>;
- hid-descr-addr = <0x0001>;
-
pinctrl-names = "default";
pinctrl-0 = <&touchpad>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x0001>;
};
};
keyboard@3a {
compatible = "hid-over-i2c";
- interrupt-parent = <&tlmm>;
- interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
reg = <0x3a>;
- hid-descr-addr = <0x0001>;
-
pinctrl-names = "default";
pinctrl-0 = <&touchpad>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x0001>;
};
};
/dts-v1/;
-#include "msm8998-mtp.dtsi"
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
- compatible = "qcom,msm8998-mtp";
+ compatible = "qcom,msm8998-mtp", "qcom,msm8998";
qcom,board-id = <8 0>;
+
+ aliases {
+ serial0 = &blsp2_uart1;
+ serial1 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&blsp1_uart3_on {
+ rx {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-up on 45 (RX). This is needed to
+ * avoid garbage data when the TX pin of the Bluetooth
+ * module is in tri-state (module powered off or not
+ * driving the signal yet).
+ */
+ bias-pull-up;
+ };
+
+ cts {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-down on 47 (CTS) to match the pull
+ * of the Bluetooth module.
+ */
+ bias-pull-down;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+};
+
+&etf {
+ status = "okay";
+};
+
+&etm1 {
+ status = "okay";
+};
+
+&etm2 {
+ status = "okay";
+};
+
+&etm3 {
+ status = "okay";
+};
+
+&etm4 {
+ status = "okay";
+};
+
+&etm5 {
+ status = "okay";
+};
+
+&etm6 {
+ status = "okay";
+};
+
+&etm7 {
+ status = "okay";
+};
+
+&etm8 {
+ status = "okay";
+};
+
+&etr {
+ status = "okay";
+};
+
+&funnel1 {
+ status = "okay";
+};
+
+&funnel2 {
+ status = "okay";
+};
+
+&funnel3 {
+ status = "okay";
+};
+
+&funnel4 {
+ // FIXME: Figure out why clock late_initcall crashes the board with
+ // this enabled.
+ // status = "okay";
+};
+
+&funnel5 {
+ // FIXME: Figure out why clock late_initcall crashes the board with
+ // this enabled.
+ // status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pm8005_regulators {
+ vdd_s1-supply = <&vph_pwr>;
+
+ pm8005_s1: s1 { /* VDD_GFX supply */
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <500>;
+
+ /* Hack until we rig up the gpu consumer */
+ regulator-always-on;
+ };
+};
+
+&qusb2phy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-system-load = <800000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
+
+&remoteproc_adsp {
+ status = "okay";
+};
+
+&remoteproc_mss {
+ status = "okay";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
+&sdhc2 {
+ status = "okay";
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on &sdc2_cd>;
+ pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+ status = "okay";
+};
+
+&ufshc {
+ status = "okay";
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l26a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vcc-max-microamp = <750000>;
+ vccq-max-microamp = <560000>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
-
-#include "msm8998.dtsi"
-#include "pm8998.dtsi"
-#include "pmi8998.dtsi"
-#include "pm8005.dtsi"
-
-/ {
- aliases {
- serial0 = &blsp2_uart1;
- serial1 = &blsp1_uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&blsp1_uart3 {
- status = "okay";
-
- bluetooth {
- compatible = "qcom,wcn3990-bt";
-
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- };
-};
-
-&blsp2_uart1 {
- status = "okay";
-};
-
-&etf {
- status = "okay";
-};
-
-&etm1 {
- status = "okay";
-};
-
-&etm2 {
- status = "okay";
-};
-
-&etm3 {
- status = "okay";
-};
-
-&etm4 {
- status = "okay";
-};
-
-&etm5 {
- status = "okay";
-};
-
-&etm6 {
- status = "okay";
-};
-
-&etm7 {
- status = "okay";
-};
-
-&etm8 {
- status = "okay";
-};
-
-&etr {
- status = "okay";
-};
-
-&funnel1 {
- status = "okay";
-};
-
-&funnel2 {
- status = "okay";
-};
-
-&funnel3 {
- status = "okay";
-};
-
-&funnel4 {
- // FIXME: Figure out why clock late_initcall crashes the board with
- // this enabled.
- // status = "okay";
-};
-
-&funnel5 {
- // FIXME: Figure out why clock late_initcall crashes the board with
- // this enabled.
- // status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pm8005_lsid1 {
- pm8005-regulators {
- compatible = "qcom,pm8005-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
-
- pm8005_s1: s1 { /* VDD_GFX supply */
- regulator-min-microvolt = <524000>;
- regulator-max-microvolt = <1100000>;
- regulator-enable-ramp-delay = <500>;
-
- /* hack until we rig up the gpu consumer */
- regulator-always-on;
- };
- };
-};
-
-&qusb2phy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&replicator1 {
- status = "okay";
-};
-
-&rpm_requests {
- pm8998-regulators {
- compatible = "qcom,rpm-pm8998-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_s4-supply = <&vph_pwr>;
- vdd_s5-supply = <&vph_pwr>;
- vdd_s6-supply = <&vph_pwr>;
- vdd_s7-supply = <&vph_pwr>;
- vdd_s8-supply = <&vph_pwr>;
- vdd_s9-supply = <&vph_pwr>;
- vdd_s10-supply = <&vph_pwr>;
- vdd_s11-supply = <&vph_pwr>;
- vdd_s12-supply = <&vph_pwr>;
- vdd_s13-supply = <&vph_pwr>;
- vdd_l1_l27-supply = <&vreg_s7a_1p025>;
- vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
- vdd_l3_l11-supply = <&vreg_s7a_1p025>;
- vdd_l4_l5-supply = <&vreg_s7a_1p025>;
- vdd_l6-supply = <&vreg_s5a_2p04>;
- vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
- vdd_l9-supply = <&vreg_bob>;
- vdd_l10_l23_l25-supply = <&vreg_bob>;
- vdd_l13_l19_l21-supply = <&vreg_bob>;
- vdd_l16_l28-supply = <&vreg_bob>;
- vdd_l18_l22-supply = <&vreg_bob>;
- vdd_l20_l24-supply = <&vreg_bob>;
- vdd_l26-supply = <&vreg_s3a_1p35>;
- vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
-
- vreg_s3a_1p35: s3 {
- regulator-min-microvolt = <1352000>;
- regulator-max-microvolt = <1352000>;
- };
- vreg_s4a_1p8: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
- };
- vreg_s5a_2p04: s5 {
- regulator-min-microvolt = <1904000>;
- regulator-max-microvolt = <2040000>;
- };
- vreg_s7a_1p025: s7 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1028000>;
- };
- vreg_l1a_0p875: l1 {
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- };
- vreg_l2a_1p2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- vreg_l3a_1p0: l3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l5a_0p8: l5 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
- vreg_l6a_1p8: l6 {
- regulator-min-microvolt = <1808000>;
- regulator-max-microvolt = <1808000>;
- };
- vreg_l7a_1p8: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l8a_1p2: l8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- vreg_l9a_1p8: l9 {
- regulator-min-microvolt = <1808000>;
- regulator-max-microvolt = <2960000>;
- };
- vreg_l10a_1p8: l10 {
- regulator-min-microvolt = <1808000>;
- regulator-max-microvolt = <2960000>;
- };
- vreg_l11a_1p0: l11 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l12a_1p8: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l13a_2p95: l13 {
- regulator-min-microvolt = <1808000>;
- regulator-max-microvolt = <2960000>;
- };
- vreg_l14a_1p88: l14 {
- regulator-min-microvolt = <1880000>;
- regulator-max-microvolt = <1880000>;
- };
- vreg_l15a_1p8: l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l16a_2p7: l16 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- };
- vreg_l17a_1p3: l17 {
- regulator-min-microvolt = <1304000>;
- regulator-max-microvolt = <1304000>;
- };
- vreg_l18a_2p7: l18 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- };
- vreg_l19a_3p0: l19 {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
- };
- vreg_l20a_2p95: l20 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-allow-set-load;
- };
- vreg_l21a_2p95: l21 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-allow-set-load;
- regulator-system-load = <800000>;
- };
- vreg_l22a_2p85: l22 {
- regulator-min-microvolt = <2864000>;
- regulator-max-microvolt = <2864000>;
- };
- vreg_l23a_3p3: l23 {
- regulator-min-microvolt = <3312000>;
- regulator-max-microvolt = <3312000>;
- };
- vreg_l24a_3p075: l24 {
- regulator-min-microvolt = <3088000>;
- regulator-max-microvolt = <3088000>;
- };
- vreg_l25a_3p3: l25 {
- regulator-min-microvolt = <3104000>;
- regulator-max-microvolt = <3312000>;
- };
- vreg_l26a_1p2: l26 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
- };
- vreg_l28_3p0: l28 {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
- };
-
- vreg_lvs1a_1p8: lvs1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_lvs2a_1p8: lvs2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- };
-
- pmi8998-regulators {
- compatible = "qcom,rpm-pmi8998-regulators";
-
- vdd_bob-supply = <&vph_pwr>;
-
- vreg_bob: bob {
- regulator-min-microvolt = <3312000>;
- regulator-max-microvolt = <3600000>;
- };
- };
-};
-
-&remoteproc_adsp {
- status = "okay";
-};
-
-&remoteproc_mss {
- status = "okay";
-};
-
-&remoteproc_slpi {
- status = "okay";
-};
-
-&tlmm {
- gpio-reserved-ranges = <0 4>, <81 4>;
-};
-
-&sdhc2 {
- status = "okay";
- cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vreg_l13a_2p95>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-};
-
-&stm {
- status = "okay";
-};
-
-&ufshc {
- status = "okay";
- vcc-supply = <&vreg_l20a_2p95>;
- vccq-supply = <&vreg_l26a_1p2>;
- vccq2-supply = <&vreg_s4a_1p8>;
- vcc-max-microamp = <750000>;
- vccq-max-microamp = <560000>;
- vccq2-max-microamp = <750000>;
-};
-
-&ufsphy {
- status = "okay";
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l2a_1p2>;
- vddp-ref-clk-supply = <&vreg_l26a_1p2>;
-};
-
-&usb3 {
- status = "okay";
-};
-
-&usb3_dwc3 {
- dr_mode = "host"; /* Force to host until we have Type-C hooked up */
-};
-
-&usb3phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l2a_1p2>;
-};
-
-&wifi {
- status = "okay";
-
- vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
- vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
- vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
- vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-};
-
-/* PINCTRL - board-specific pinctrl */
-&blsp1_uart3_on {
- rx {
- /delete-property/ bias-disable;
- /*
- * Configure a pull-up on 45 (RX). This is needed to
- * avoid garbage data when the TX pin of the Bluetooth
- * module is in tri-state (module powered off or not
- * driving the signal yet).
- */
- bias-pull-up;
- };
-
- cts {
- /delete-property/ bias-disable;
- /*
- * Configure a pull-down on 47 (CTS) to match the pull
- * of the Bluetooth module.
- */
- bias-pull-down;
- };
-};
};
&pmi8998_gpio {
- button_backlight_default: button-backlight-default {
+ button_backlight_default: button-backlight-state {
pinconf {
pins = "gpio5";
function = "normal";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "msm8998.dtsi"
+#include "pm8005.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
-#include "pm8005.dtsi"
/ {
/* Required for bootloader to select correct board */
height = <1920>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
+ /*
+ * That's a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet..
+ */
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_BYTE0_INTF_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&vol_keys_default>;
- vol-down {
+ button-vol-down {
label = "Volume down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
wakeup-source;
};
- vol-up {
+ button-vol-up {
label = "Volume up";
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor_default>;
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
status = "okay";
};
-&pm8005_lsid1 {
- pm8005-regulators {
- compatible = "qcom,pm8005-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
-
- pm8005_s1: s1 { /* VDD_GFX supply */
- regulator-min-microvolt = <524000>;
- regulator-max-microvolt = <1100000>;
- regulator-enable-ramp-delay = <500>;
-
- /* hack until we rig up the gpu consumer */
- regulator-always-on;
- };
+&pm8005_regulators {
+ /* VDD_GFX supply */
+ pm8005_s1: s1 {
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <500>;
+ /* Hack until we rig up the gpu consumer */
+ regulator-always-on;
};
};
&pm8998_gpio {
- vol_keys_default: vol-keys-default {
- pinconf {
- pins = "gpio5", "gpio6";
- function = "normal";
- bias-pull-up;
- input-enable;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
+ vol_keys_default: vol-keys-state {
+ pins = "gpio5", "gpio6";
+ function = "normal";
+ bias-pull-up;
+ input-enable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
};
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
};
+
vreg_s4a_1p8: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
+
vreg_s5a_2p04: s5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2040000>;
};
+
vreg_s7a_1p025: s7 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1028000>;
};
+
vreg_l1a_0p875: l1 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
};
+
vreg_l2a_1p2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
vreg_l3a_1p0: l3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
+
vreg_l5a_0p8: l5 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
+
vreg_l6a_1p8: l6 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <1808000>;
};
+
vreg_l7a_1p8: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
vreg_l8a_1p2: l8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
vreg_l9a_1p8: l9 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l10a_1p8: l10 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l11a_1p0: l11 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
+
vreg_l12a_1p8: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
vreg_l13a_2p95: l13 {
regulator-min-microvolt = <1808000>;
regulator-max-microvolt = <2960000>;
};
+
vreg_l14a_1p88: l14 {
regulator-min-microvolt = <1880000>;
regulator-max-microvolt = <1880000>;
};
+
vreg_l15a_1p8: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
vreg_l16a_2p7: l16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
};
+
vreg_l17a_1p3: l17 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
};
+
vreg_l18a_2p7: l18 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
};
+
vreg_l19a_3p0: l19 {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
};
+
vreg_l20a_2p95: l20 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
vreg_l21a_2p95: l21 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
- regulator-allow-set-load;
regulator-system-load = <800000>;
+ regulator-allow-set-load;
};
+
vreg_l22a_2p85: l22 {
regulator-min-microvolt = <2864000>;
regulator-max-microvolt = <2864000>;
};
+
vreg_l23a_3p3: l23 {
regulator-min-microvolt = <3312000>;
regulator-max-microvolt = <3312000>;
};
+
vreg_l24a_3p075: l24 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
};
+
vreg_l25a_3p3: l25 {
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3312000>;
};
+
vreg_l26a_1p2: l26 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
+
vreg_l28_3p0: l28 {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
};
+
vreg_lvs1a_1p8: lvs1 { };
vreg_lvs2a_1p8: lvs2 { };
};
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
+
+&vreg_lvs1a_1p8 {
+ status = "disabled";
+};
};
&pmi8998_gpio {
- disp_dvdd_en: disp-dvdd-en-active {
+ disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10";
function = "normal";
bias-disable;
};
&vreg_l18a_2p85 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
+ /* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */
+ regulator-min-microvolt = <2848000>;
+ regulator-max-microvolt = <2848000>;
};
&vreg_l22a_2p85 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
+ /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <2696000>;
};
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "msm8998.dtsi"
#include "pm8005.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
/ {
/* required for bootloader to select correct board */
qcom,board-id = <8 0>;
clocks {
- compatible = "simple-bus";
-
div1_mclk: divclk1 {
compatible = "gpio-gate-clock";
pinctrl-0 = <&audio_mclk_pin>;
regulator-boot-on;
};
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
pinctrl-names = "default";
pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
- vol-down {
+ button-vol-down {
label = "Volume Down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
debounce-interval = <15>;
};
- camera-snapshot {
+ button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
debounce-interval = <15>;
};
- camera-focus {
+ button-camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor0_default>;
- hall-sensor0 {
+ event-hall-sensor0 {
label = "Cover Hall Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
status = "okay";
};
+&blsp2_i2c2 {
+ status = "okay";
+
+ proximity@29 {
+ compatible = "st,vl53l0x";
+ reg = <0x29>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&cam_vio_vreg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tof_int &tof_reset>;
+ };
+};
+
&ibb {
regulator-min-microamp = <800000>;
regulator-max-microamp = <800000>;
regulator-soft-start;
};
-&mmcc {
- status = "ok";
-};
-
-&mmss_smmu {
- status = "ok";
-};
-
-&pm8005_lsid1 {
- pm8005-regulators {
- compatible = "qcom,pm8005-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
-
- /* VDD_GFX supply */
- pm8005_s1: s1 {
- regulator-min-microvolt = <524000>;
- regulator-max-microvolt = <1088000>;
- regulator-enable-ramp-delay = <500>;
- regulator-always-on;
- };
+&pm8005_regulators {
+ /* VDD_GFX supply */
+ pm8005_s1: s1 {
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1088000>;
+ regulator-enable-ramp-delay = <500>;
+ /* Hack until we rig up the gpu consumer */
+ regulator-always-on;
};
};
&pm8998_gpio {
- vol_down_pin_a: vol-down-active {
+ vol_down_pin_a: vol-down-active-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active {
+ cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active {
+ cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- audio_mclk_pin: audio-mclk-pin-active {
+ audio_mclk_pin: audio-mclk-pin-active-state {
pins = "gpio13";
function = "func2";
power-source = <0>;
};
&pmi8998_gpio {
- cam_vio_default: cam-vio-active {
+ cam_vio_default: cam-vio-active-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
power-source = <1>;
};
- vib_default: vib-en {
+ vib_default: vib-en-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
vqmmc-supply = <&vreg_l13a_2p95>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ pinctrl-0 = <&sdc2_on &sdc2_cd>;
+ pinctrl-1 = <&sdc2_off &sdc2_cd>;
};
&tlmm {
drive-strength = <2>;
};
+ tof_int: tof-int {
+ pins = "gpio22";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ };
+
cam1_vdig_default: cam1-vdig-default {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
};
+ usb_extcon_active: usb-extcon-active {
+ pins = "gpio38";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ tof_reset: tof-reset {
+ pins = "gpio27";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
hall_sensor0_default: acc-cover-open {
pins = "gpio124";
function = "gpio";
bias-pull-up;
};
+ usb_vbus_active: usb-vbus-active {
+ pins = "gpio128";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-low;
+ };
+
ts_vddio_en: ts-vddio-en-default {
pins = "gpio133";
function = "gpio";
&usb3_dwc3 {
/* Force to peripheral until we have Type-C hooked up */
dr_mode = "peripheral";
+ extcon = <&extcon_usb>;
};
&usb3phy {
};
qfprom: qfprom@784000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
reg = <0x00784000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
+ interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x03400000 0xc00000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- #gpio-cells = <0x2>;
+ #gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <0x2>;
+ #interrupt-cells = <2>;
- sdc2_clk_on: sdc2_clk_on {
- config {
+ sdc2_on: sdc2-on {
+ clk {
pins = "sdc2_clk";
- bias-disable;
drive-strength = <16>;
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
bias-disable;
- drive-strength = <2>;
};
- };
- sdc2_cmd_on: sdc2_cmd_on {
- config {
+ cmd {
pins = "sdc2_cmd";
- bias-pull-up;
drive-strength = <10>;
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
bias-pull-up;
- drive-strength = <2>;
};
- };
- sdc2_data_on: sdc2_data_on {
- config {
+ data {
pins = "sdc2_data";
- bias-pull-up;
drive-strength = <10>;
+ bias-pull-up;
};
};
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up;
+ sdc2_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
drive-strength = <2>;
+ bias-disable;
};
- };
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio95";
- function = "gpio";
+ cmd {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
};
- config {
- pins = "gpio95";
- bias-pull-up;
+ data {
+ pins = "sdc2_data";
drive-strength = <2>;
+ bias-pull-up;
};
};
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up;
- drive-strength = <2>;
- };
+ sdc2_cd: sdc2-cd {
+ pins = "gpio95";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
};
- blsp1_uart3_on: blsp1_uart3_on {
+ blsp1_uart3_on: blsp1-uart3-on {
tx {
pins = "gpio45";
function = "blsp_uart3_a";
status = "disabled";
gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2";
opp-710000097 {
opp-hz = /bits/ 64 <710000097>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
<0xc010600 0x128>,
<0xc010800 0x200>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
nvmem-cells = <&qusb2_hstx_trim>;
};
- sdhc2: sdhci@c0a4900 {
+ sdhc2: mmc@c0a4900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
reg-names = "hc_mem", "core_mem";
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xc8c0000 0x40000>;
- status = "disabled";
clock-names = "xo",
"gpll0",
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
"bus-mm", "bus-smmu";
- status = "disabled";
#global-interrupts = <0>;
interrupts =
};
pm6350_gpios: gpios@c000 {
- compatible = "qcom,pm6350-gpio";
+ compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm6350_gpios 0 0 9>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm660_gpios: gpios@c000 {
- compatible = "qcom,pm660-gpio";
+ compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm660_gpios 0 0 13>;
#address-cells = <1>;
#size-cells = <0>;
+ pm660l_lpg: lpg@b100 {
+ compatible = "qcom,pm660l-lpg";
+
+ status = "disabled";
+ };
+
pm660l_wled: leds@d800 {
compatible = "qcom,pm660l-wled";
- reg = <0xd800 0xd900>;
+ reg = <0xd800>, <0xd900>;
interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ovp";
label = "backlight";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8005_regulators: regulators {
+ compatible = "qcom,pm8005-regulators";
+ };
};
};
};
pm8009_gpios: gpio@c000 {
- compatible = "qcom,pm8005-gpio";
+ compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8009_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm8150_gpios: gpio@c000 {
- compatible = "qcom,pm8150-gpio";
+ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8150_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm8150b_gpios: gpio@c000 {
- compatible = "qcom,pm8150b-gpio";
+ compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8150b_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8150b_lpg: lpg {
+ compatible = "qcom,pm8150b-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
};
};
};
pm8150l_gpios: gpio@c000 {
- compatible = "qcom,pm8150l-gpio";
+ compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8150l_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8150l_lpg: lpg {
+ compatible = "qcom,pm8150l-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
};
};
};
pm8350_gpios: gpio@8800 {
- compatible = "qcom,pm8350-gpio";
+ compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pm8350_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm8350b_gpios: gpio@8800 {
- compatible = "qcom,pm8350b-gpio";
+ compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pm8350b_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm8916_gpios: gpios@c000 {
- compatible = "qcom,pm8916-gpio";
+ compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8916_gpios 0 0 4>;
#gpio-cells = <2>;
- interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
- <0 0xc1 0 IRQ_TYPE_NONE>,
- <0 0xc2 0 IRQ_TYPE_NONE>,
- <0 0xc3 0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
#address-cells = <1>;
#size-cells = <0>;
+ pm8916_pwm: pwm {
+ compatible = "qcom,pm8916-pwm";
+
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pm8916_vib: vibrator@c000 {
compatible = "qcom,pm8916-vib";
reg = <0xc000>;
#address-cells = <1>;
#size-cells = <0>;
+ pm8994_lpg: lpg {
+ compatible = "qcom,pm8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pm8994_spmi_regulators: regulators {
compatible = "qcom,pm8994-regulators";
};
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmi8994_mpps: mpps@a000 {
+ compatible = "qcom,pmi8994-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ gpio-ranges = <&pmi8994_mpps 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ pmi8994_lpg: lpg {
+ compatible = "qcom,pmi8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pmi8994_spmi_regulators: regulators {
compatible = "qcom,pmi8994-regulators";
#address-cells = <1>;
pmi8994_wled: wled@d800 {
compatible = "qcom,pmi8994-wled";
- reg = <0xd800 0xd900>;
+ reg = <0xd800>, <0xd900>;
interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "short";
qcom,cabc;
};
};
+ pmi8998_lpg: lpg {
+ compatible = "qcom,pmi8998-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pmi8998_wled: leds@d800 {
compatible = "qcom,pmi8998-wled";
- reg = <0xd800 0xd900>;
+ reg = <0xd800>, <0xd900>;
interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ovp", "short";
status = "disabled";
};
-
};
};
};
pmm8155au_1_gpios: gpio@c000 {
- compatible = "qcom,pmm8155au-gpio";
+ compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
};
pmm8155au_2_gpios: gpio@c000 {
- compatible = "qcom,pmm8155au-gpio";
+ compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
};
pmr735b_gpios: gpio@8800 {
- compatible = "qcom,pmr735b-gpio";
+ compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pmr735b_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
#size-cells = <0>;
pms405_gpios: gpio@c000 {
- compatible = "qcom,pms405-gpio";
+ compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pms405_gpios 0 0 12>;
#gpio-cells = <2>;
- interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
- <0 0xc1 0 IRQ_TYPE_NONE>,
- <0 0xc2 0 IRQ_TYPE_NONE>,
- <0 0xc3 0 IRQ_TYPE_NONE>,
- <0 0xc4 0 IRQ_TYPE_NONE>,
- <0 0xc5 0 IRQ_TYPE_NONE>,
- <0 0xc6 0 IRQ_TYPE_NONE>,
- <0 0xc7 0 IRQ_TYPE_NONE>,
- <0 0xc8 0 IRQ_TYPE_NONE>,
- <0 0xc9 0 IRQ_TYPE_NONE>,
- <0 0xca 0 IRQ_TYPE_NONE>,
- <0 0xcb 0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
pon@800 {
};
&pms405_gpios {
- usb_vbus_boost_pin: usb-vbus-boost-pin {
+ usb_vbus_boost_pin: usb-vbus-boost-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <1>;
};
};
- usb3_vbus_pin: usb3-vbus-pin {
+ usb3_vbus_pin: usb3-vbus-state {
pinconf {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
};
qfprom: qfprom@a4000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy_sec>, <&usb3_phy>;
+ phys = <&usb2_phy_prim>, <&usb3_phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy_prim>;
+ phys = <&usb2_phy_sec>;
phy-names = "usb2-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
};
blsp1_spi1_default: blsp1-spi1-default {
- pins = "gpio22", "gpio23", "gpio24", "gpio25";
- function = "blsp_spi1";
+ mosi {
+ pins = "gpio22";
+ function = "blsp_spi_mosi_a1";
+ };
+
+ miso {
+ pins = "gpio23";
+ function = "blsp_spi_miso_a1";
+ };
+
+ cs_n {
+ pins = "gpio24";
+ function = "blsp_spi_cs_n_a1";
+ };
+
+ clk {
+ pins = "gpio25";
+ function = "blsp_spi_clk_a1";
+ };
};
blsp1_spi2_default: blsp1-spi2-default {
status = "disabled";
};
- sdcc1: sdcc@7804000 {
+ sdcc1: mmc@7804000 {
compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
reg-names = "hc", "cqhci";
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
status = "disabled";
};
status = "disabled";
};
- imem@8600000 {
- compatible = "simple-mfd";
+ sram@8600000 {
+ compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
reg = <0x08600000 0x1000>;
#address-cells = <1>;
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
leds {
compatible = "gpio-leds";
- user4 {
+ led-user4 {
label = "green:user4";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "panic-indicator";
default-state = "off";
};
- wlan {
+ led-wlan {
label = "yellow:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt {
+ led-bt {
label = "blue:bt";
+ function = LED_FUNCTION_BLUETOOTH;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
-
};
lt9611_1v2: lt9611-vdd12-regulator {
"NC",
"PM3003A_MODE";
- lt9611_rst_pin: lt9611-rst-pin {
+ lt9611_rst_pin: lt9611-rst-state {
pins = "gpio5";
function = "normal";
};
};
+&pm8150l_lpg {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <3>;
+
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ default-state = "on";
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
&q6afedai {
qi2s@16 {
- reg = <16>;
+ reg = <PRIMARY_MI2S_RX>;
qcom,sd-lines = <0 1 2 3>;
};
};
/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
&q6afedai {
qi2s@20 {
- reg = <20>;
+ reg = <TERTIARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
};
};
codec {
- sound-dai = <<9611_codec 0>;
+ sound-dai = <<9611_codec 0>;
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "sa8540p.dtsi"
+
+/ {
+ model = "Qualcomm SA8295P ADP";
+ compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
+
+ aliases {
+ serial0 = &qup2_uart17;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ pmm8540-a-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13a: ldo13 {
+ regulator-name = "vreg_l13a";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pmm8540-c-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c: ldo10 {
+ regulator-name = "vreg_l10c";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l17c: ldo17 {
+ regulator-name = "vreg_l17c";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pmm8540-g-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ vreg_l3g: ldo3 {
+ regulator-name = "vreg_l3g";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7g: ldo7 {
+ regulator-name = "vreg_l7g";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l8g: ldo8 {
+ regulator-name = "vreg_l8g";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&qup2_uart17 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8540p/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sa8540p/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_nsp1 {
+ firmware-name = "qcom/sa8540p/cdsp1.mbn";
+ status = "okay";
+};
+
+&spmi_bus {
+ pm8450a: pmic@0 {
+ compatible = "qcom,pm8150", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8450a_gpios: gpio@c000 {
+ compatible = "qcom,pm8150-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm8450c: pmic@4 {
+ compatible = "qcom,pm8150", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8450c_gpios: gpio@c000 {
+ compatible = "qcom,pm8150-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm8450e: pmic@8 {
+ compatible = "qcom,pm8150", "qcom,spmi-pmic";
+ reg = <0x8 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8450e_gpios: gpio@c000 {
+ compatible = "qcom,pm8150-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm8450g: pmic@c {
+ compatible = "qcom,pm8150", "qcom,spmi-pmic";
+ reg = <0xc SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8450g_gpios: gpio@c000 {
+ compatible = "qcom,pm8150-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17c>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6c>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+
+ status = "okay";
+};
+
+&ufs_card_hc {
+ reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10c>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l3c>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_card_phy {
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l7a>;
+ vdda33-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l3a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l1c>;
+ vdda18-supply = <&vreg_l7c>;
+ vdda33-supply = <&vreg_l2c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4c>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy0 {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l7g>;
+ vdda33-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy1 {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l7g>;
+ vdda33-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy2 {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l7g>;
+ vdda33-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy3 {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l7g>;
+ vdda33-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "sc8280xp.dtsi"
+
+/delete-node/ &cpu0_opp_table;
+/delete-node/ &cpu4_opp_table;
+
+/ {
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ };
+ opp-499200000 {
+ opp-hz = /bits/ 64 <499200000>;
+ };
+ opp-595200000 {
+ opp-hz = /bits/ 64 <595200000>;
+ };
+ opp-710400000 {
+ opp-hz = /bits/ 64 <710400000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ };
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ };
+ opp-1881600000 {
+ opp-hz = /bits/ 64 <1881600000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ };
+ opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ };
+ opp-2246400000 {
+ opp-hz = /bits/ 64 <2246400000>;
+ };
+ };
+
+ cpu4_opp_table: cpu4-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ };
+ opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ };
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ };
+ opp-2169600000 {
+ opp-hz = /bits/ 64 <2169600000>;
+ };
+ opp-2284800000 {
+ opp-hz = /bits/ 64 <2284800000>;
+ };
+ opp-2380800000 {
+ opp-hz = /bits/ 64 <2380800000>;
+ };
+ opp-2496000000 {
+ opp-hz = /bits/ 64 <2496000000>;
+ };
+ opp-2592000000 {
+ opp-hz = /bits/ 64 <2592000000>;
+ };
+ };
+};
+
+&rpmhpd {
+ compatible = "qcom,sa8540p-rpmhpd";
+};
&dsi_phy {
status = "okay";
+ vdds-supply = <&vreg_l4a_0p8>;
};
&mdp {
pinctrl-names = "default","sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
- vmmc-supply = <&vreg_l9c_2p9>;
+ vmmc-supply = <&vreg_l9c_2p9>;
vqmmc-supply = <&vreg_l6c_2p9>;
cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&pm6150l_gpio {
- disp_pins: disp-pins {
+ disp_pins: disp-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_FUNC1;
};
&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+
cros_ec_proximity: proximity {
compatible = "google,cros-ec-mkbp-proximity";
label = "proximity-wifi";
status = "okay";
};
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+};
+
&panel {
compatible = "samsung,atna33xc20";
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev0)";
+ compatible = "google,kingoftown-rev0", "qcom,sc7180";
+};
+
+/*
+ * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a
+ * power rail instead, since kingoftown does not have FP.
+ */
+&pp3300_fp_tp {
+ gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_fp_rails>;
+};
+
+&tlmm {
+ en_fp_rails: en-fp-rails {
+ pinmux {
+ pins = "gpio74";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio74";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev1+)";
+ compatible = "google,kingoftown", "qcom,sc7180";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&ap_tp_i2c {
+ status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_L", /* 0 */
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "", /* 10 */
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "",
+ "", /* 30 */
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD", /* 40 */
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK", /* 50 */
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI", /* 60 */
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "", /* 70 */
+ "",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK", /* 80 */
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1", /* 90 */
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 100 */
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 110 */
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
*/
/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
&ap_sar_sensor {
semtech,cs0-ground;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 AUO panel board";
+ compatible = "google,mrbland-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 BOE panel board";
+ compatible = "google,mrbland-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland rev1+ AUO panel board";
+ compatible = "google,mrbland-sku1536", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x300 => 768
+ * - bits 11..8: Panel ID: 0x3 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland (rev1 - 2) BOE panel board";
+ /* Uses ID 768 on rev1 and 1024 on rev2+ */
+ compatible = "google,mrbland-sku1024", "google,mrbland-sku768",
+ "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_MRBLAND";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade,LTE)";
+ compatible = "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (TI,LTE)";
+ compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade)";
+ compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (TI)";
+ compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <1 3 3>;
+ semtech,ph1-pin = <3 1 3>;
+ semtech,ph2-pin = <1 3 3>;
+ semtech,ph3-pin = <0 0 0>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <1>;
+ semtech,avg-pos-strength = <128>;
+ semtech,input-analog-gain = <0>;
+ semtech,cs-idle-sleep = "gnd";
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+ status = "okay";
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+ post-power-on-delay-ms = <100>;
+ hid-descr-addr = <0x0001>;
+
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_ODL",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "",
+ "",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
*/
#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+) with LTE";
+ compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <3 1 3>;
+ semtech,ph1-pin = <2 1 2>;
+ semtech,ph2-pin = <3 3 1>;
+ semtech,ph3-pin = <1 3 3>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <3>;
+ semtech,avg-pos-strength = <256>;
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+)";
+ compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ ppvar_lcd: ppvar-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvar_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_disp: v1p8-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_disp";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_disp_on>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+};
+
+&dsi0 {
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ avdd-supply = <&ppvar_lcd>;
+ pp1800-supply = <&v1p8_disp>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "PP1800_DISP_ON",
+ "LCD_RST",
+ "PPVAR_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ lcd_rst: lcd-rst {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ppvar_lcd_en: ppvar-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pp1800_disp_on: pp1800-disp-on {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
/dts-v1/;
#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 BOE panel board";
+ compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 INX panel board";
+ compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x401 => 1025
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-boe.dts"
+
+/ {
+ model = "Google Wormdingler rev1+ (BOE, rt5682s)";
+ compatible = "google,wormdingler-sku1025", "qcom,sc7180";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x400 => 1024
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ BOE panel board";
+ compatible = "google,wormdingler-sku1024", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-drive-ldo-level = <450>;
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0001 => 1
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-inx.dts"
+
+/ {
+ model = "Google Wormdingler rev1+ (INX, rt5682s)";
+ compatible = "google,wormdingler-sku1", "qcom,sc7180";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0000 => 0
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ INX panel board";
+ compatible = "google,wormdingler-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ pp1800_ts:
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <574>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <58000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <62500>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <68000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ base_detection: cbas {
+ compatible = "google,cros-cbas";
+ };
+
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@1 {
+ compatible = "hid-over-i2c";
+ reg = <0x01>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <70>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ vddl-supply = <&pp1800_ts>;
+ };
+};
+
+&pm6150_adc {
+ skin-temp-thermistor@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/sc7180-lpass.h>
*/
/delete-node/ &hyp_mem;
+/delete-node/ &ipa_fw_mem;
/delete-node/ &xbl_mem;
/delete-node/ &aop_mem;
/delete-node/ &sec_apps_mem;
pinctrl-names = "default";
pinctrl-0 = <&pen_pdct_l>;
- pen_insert: pen-insert {
+ pen_insert: switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
keyboard_backlight: keyboard-backlight {
status = "disabled";
label = "cros_ec::kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
pwms = <&cros_ec_pwm 0>;
max-brightness = <1023>;
};
pinctrl-names = "default";
pinctrl-0 = <&dp_hot_plug_det>;
data-lanes = <0 1>;
- vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
- vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
};
&pm6150_adc {
};
};
-#include <arm/cros-ec-keyboard.dtsi>
#include <arm/cros-ec-sbs.dtsi>
&uart3 {
};
};
- cpu0_opp_table: cpu0_opp_table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu6_opp_table: cpu6_opp_table {
+ cpu6_opp_table: opp-table-cpu6 {
compatible = "operating-points-v2";
opp-shared;
};
};
- sdhc_1: sdhci@7c4000 {
+ sdhc_1: mmc@7c4000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x7c4000 0 0x1000>,
<0 0x07c5000 0 0x1000>;
<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
status = "disabled";
- sdhc1_opp_table: sdhc1-opp-table {
+ sdhc1_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
};
};
- qup_opp_table: qup-opp-table {
+ qup_opp_table: opp-table-qup {
compatible = "operating-points-v2";
opp-75000000 {
};
gmu: gmu@506a000 {
- compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
<0 0x0b490000 0 0x10000>;
reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
status = "disabled";
- sdhc2_opp_table: sdhc2-opp-table {
+ sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
};
};
- qspi_opp_table: qspi-opp-table {
+ qspi_opp_table: opp-table-qspi {
compatible = "operating-points-v2";
opp-75000000 {
compatible = "venus-encoder";
};
- venus_opp_table: venus-opp-table {
+ venus_opp_table: opp-table {
compatible = "operating-points-v2";
opp-150000000 {
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "ahb", "core";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
- assigned-clock-rates = <300000000>;
-
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
status = "disabled";
- mdp: mdp@ae01000 {
+ mdp: display-controller@ae01000 {
compatible = "qcom,sc7180-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus", "iface", "rot", "lut", "core",
"vsync";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>;
- assigned-clock-rates = <300000000>,
- <19200000>,
+ assigned-clock-rates = <19200000>,
<19200000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
};
};
- mdp_opp_table: mdp-opp-table {
+ mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
};
};
- dsi_opp_table: dsi-opp-table {
+ dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-187500000 {
compatible = "qcom,sc7180-dp";
status = "disabled";
- reg = <0 0x0ae90000 0 0x1400>;
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0xc00>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
clock-names = "core_iface", "core_aux", "ctrl_link",
"ctrl_link_iface", "stream_pixel";
- #clock-cells = <1>;
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sc7180-aoss-qmp";
+ compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
cell-index = <0>;
};
- imem@146aa000 {
- compatible = "simple-mfd";
+ sram@146aa000 {
+ compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
reg = <0 0x146aa000 0 0x2000>;
#address-cells = <1>;
};
timer@17c20000{
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
compatible = "qcom,sc7180-lpass-cpu";
reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
- reg-names = "lpass-hdmiif", "lpass-lpaif";
+ reg-names = "lpass-hdmiif", "lpass-lpaif";
iommus = <&apps_smmu 0x1020 0>,
<&apps_smmu 0x1021 0>,
status = "okay";
compatible = "qcom,sc7280-mss-pil";
iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+ interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
memory-region = <&mba_mem>, <&mpss_mem>;
+ firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
+ "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+};
+
+&remoteproc_wpss {
+ status = "okay";
+ firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
};
/* Increase the size from 2.5MB to 8MB */
&rmtfs_mem {
reg = <0x0 0x9c900000 0x0 0x800000>;
};
+
+&wifi {
+ status = "okay";
+
+ wifi-firmware {
+ iommus = <&apps_smmu 0x1c02 0x1>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/* PINCTRL */
+
+&lpass_dmic01_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic01_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic01_data {
+ bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic23_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic23_data {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_rx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&lpass_rx_swr_data_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_tx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
status = "okay";
};
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+ bias-pull-up;
+};
+
/* PINCTRL - BOARD-SPECIFIC */
/*
status = "okay";
};
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+ bias-pull-up;
+};
+
/* PINCTRL - BOARD-SPECIFIC */
/*
};
};
+ts_i2c: &i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth6915";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+ vcc33-supply = <&ts_avdd>;
+ };
+};
+
&ap_sar_sensor_i2c {
status = "okay";
};
status = "okay";
};
+&pwmleds {
+ status = "okay";
+};
+
/* For eMMC */
&sdhc_1 {
status = "okay";
};
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+ bias-disable;
+};
+
/* PINCTRL - BOARD-SPECIFIC */
/*
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "sc7280-qcard.dtsi"
#include "sc7280-chrome-common.dtsi"
/* BOARD-SPECIFIC TOP LEVEL NODES */
- pwmleds {
+ pwmleds: pwmleds {
compatible = "pwm-leds";
status = "disabled";
keyboard_backlight: keyboard-backlight {
- status = "disabled";
label = "cros_ec::kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
pwms = <&cros_ec_pwm 0>;
max-brightness = <1023>;
};
vdd-supply = <&pp1800_prox>;
- label = "proximity-wifi-lte0";
+ label = "proximity-wifi_cellular-0";
status = "disabled";
};
vdd-supply = <&pp1800_prox>;
- label = "proximity-wifi-lte1";
+ label = "proximity-wifi_cellular-1";
status = "disabled";
};
};
status = "okay";
};
+&mdss_dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hot_plug_det>;
+ data-lanes = <0 1>;
+};
+
&mdss_mdp {
status = "okay";
};
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&spi_flash {
+ spi-max-frequency = <50000000>;
+};
+
/* Fingerprint, enabled on a per-board basis */
ap_spi_fp: &spi9 {
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
bias-disable;
};
+&lpass_dmic01_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic01_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic01_data {
+ bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic23_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic23_data {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_rx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&lpass_rx_swr_data_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_tx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pm7325_gpios {
- key_vol_up_default: key-vol-up-default {
+ key_vol_up_default: key-vol-up-state {
pins = "gpio6";
function = "normal";
input-enable;
bias-pull-down;
};
};
-
-&remoteproc_wpss {
- status = "okay";
-};
-
-&wifi {
- status = "okay";
- wifi-firmware {
- iommus = <&apps_smmu 0x1c02 0x1>;
- };
-};
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l17b_1p8: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vdd_px_wcd9385:
vdd_txrx:
vddpx_0:
/* NOTE: Not all Qcards have eDP connector stuffed */
&mdss_edp {
- vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
- vdda-1p2-supply = <&vdd_a_edp_0_1p2>;
-
aux-bus {
edp_panel: panel {
compatible = "edp-panel";
*/
&pm8350c_gpios {
- pmic_edp_bl_en: pmic-edp-bl-en {
+ pmic_edp_bl_en: pmic-edp-bl-en-state {
pins = "gpio7";
function = "normal";
bias-disable;
output-low;
};
- pmic_edp_bl_pwm: pmic-edp-bl-pwm {
+ pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
pins = "gpio8";
function = "func1";
bias-disable;
ts_rst_conn: ts-rst-conn {
pins = "gpio54";
function = "gpio";
- bias-pull-up;
drive-strength = <2>;
};
};
};
};
- cpu0_opp_table: cpu0-opp-table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu4_opp_table: cpu4-opp-table {
+ cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu7_opp_table: cpu7-opp-table {
+ cpu7_opp_table: opp-table-cpu7 {
compatible = "operating-points-v2";
opp-shared;
method = "smc";
};
- qspi_opp_table: qspi-opp-table {
+ qspi_opp_table: opp-table-qspi {
compatible = "operating-points-v2";
opp-75000000 {
};
};
- qup_opp_table: qup-opp-table {
+ qup_opp_table: opp-table-qup {
compatible = "operating-points-v2";
opp-75000000 {
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
- <0>, <&pcie1_lane 0>,
+ <0>, <&pcie1_lane>,
<0>, <0>, <0>, <0>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
"pcie_0_pipe_clk", "pcie_1_pipe_clk",
};
};
- sdhc_1: sdhci@7c4000 {
+ sdhc_1: mmc@7c4000 {
compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
<GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_lane 0>,
+ <&pcie1_lane>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
clock-names = "pipe0";
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clock-output-names = "pcie_1_pipe_clk";
};
};
lpasscore: clock-controller@3900000 {
compatible = "qcom,sc7280-lpasscorecc";
reg = <0 0x03900000 0 0x50000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
#clock-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ lpass_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+ reg = <0 0x033c0000 0x0 0x20000>,
+ <0 0x03550000 0x0 0x10000>;
+ qcom,adsp-bypass-mode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+ #clock-cells = <1>;
+
+ lpass_dmic01_clk: dmic01-clk {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ };
+
+ lpass_dmic01_clk_sleep: dmic01-clk-sleep {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ };
+
+ lpass_dmic01_data: dmic01-data {
+ pins = "gpio7";
+ function = "dmic1_data";
+ };
+
+ lpass_dmic01_data_sleep: dmic01-data-sleep {
+ pins = "gpio7";
+ function = "dmic1_data";
+ };
+
+ lpass_dmic23_clk: dmic23-clk {
+ pins = "gpio8";
+ function = "dmic2_clk";
+ };
+
+ lpass_dmic23_clk_sleep: dmic23-clk-sleep {
+ pins = "gpio8";
+ function = "dmic2_clk";
+ };
+
+ lpass_dmic23_data: dmic23-data {
+ pins = "gpio9";
+ function = "dmic2_data";
+ };
+
+ lpass_dmic23_data_sleep: dmic23-data-sleep {
+ pins = "gpio9";
+ function = "dmic2_data";
+ };
+
+ lpass_rx_swr_clk: rx-swr-clk {
+ pins = "gpio3";
+ function = "swr_rx_clk";
+ };
+
+ lpass_rx_swr_clk_sleep: rx-swr-clk-sleep {
+ pins = "gpio3";
+ function = "swr_rx_clk";
+ };
+
+ lpass_rx_swr_data: rx-swr-data {
+ pins = "gpio4", "gpio5";
+ function = "swr_rx_data";
+ };
+
+ lpass_rx_swr_data_sleep: rx-swr-data-sleep {
+ pins = "gpio4", "gpio5";
+ function = "swr_rx_data";
+ };
+
+ lpass_tx_swr_clk: tx-swr-clk {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ };
+
+ lpass_tx_swr_clk_sleep: tx-swr-clk-sleep {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ };
+
+ lpass_tx_swr_data: tx-swr-data {
+ pins = "gpio1", "gpio2", "gpio14";
+ function = "swr_tx_data";
+ };
+
+ lpass_tx_swr_data_sleep: tx-swr-data-sleep {
+ pins = "gpio1", "gpio2", "gpio14";
+ function = "swr_tx_data";
+ };
+ };
+
gpu: gpu@3d00000 {
compatible = "qcom,adreno-635.0", "qcom,adreno";
reg = <0 0x03d00000 0 0x40000>,
};
gmu: gmu@3d6a000 {
- compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
reg = <0 0x03d6a000 0 0x34000>,
<0 0x3de0000 0 0x10000>,
<0 0x0b290000 0 0x10000>;
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
- clocks = <&gpucc 5>,
- <&gpucc 8>,
- <&gcc GCC_DDRSS_GPU_AXI_CLK>,
- <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
- <&gpucc 2>,
- <&gpucc 15>,
- <&gpucc 11>;
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
clock-names = "gmu",
"cxo",
"axi",
"ahb",
"hub",
"smmu_vote";
- power-domains = <&gpucc 0>,
- <&gpucc 1>;
+ power-domains = <&gpucc GPU_CC_CX_GDSC>,
+ <&gpucc GPU_CC_GX_GDSC>;
power-domain-names = "cx",
"gx";
iommus = <&adreno_smmu 5 0x400>;
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
- <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
- <&gpucc 2>,
- <&gpucc 11>,
- <&gpucc 5>,
- <&gpucc 15>,
- <&gpucc 13>;
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HUB_AON_CLK>;
clock-names = "gcc_gpu_memnoc_gfx_clk",
"gcc_gpu_snoc_dvm_gfx_clk",
"gpu_cc_ahb_clk",
"gpu_cc_hub_cx_int_clk",
"gpu_cc_hub_aon_clk";
- power-domains = <&gpucc 0>;
+ power-domains = <&gpucc GPU_CC_CX_GDSC>;
};
remoteproc_mpss: remoteproc@4080000 {
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 13 IRQ_TYPE_EDGE_RISING>,
- <&pdc 12 IRQ_TYPE_EDGE_RISING>;
+ <&pdc 12 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 13 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "hs_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
power-domains = <&gcc GCC_USB30_SEC_GDSC>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 17 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 14 IRQ_TYPE_LEVEL_HIGH>;
+ <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
+ "dp_hs_phy_irq",
"dm_hs_phy_irq",
- "dp_hs_phy_irq";
+ "ss_phy_irq";
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
iommus = <&apps_smmu 0x21a2 0x0>;
};
- venus_opp_table: venus-opp-table {
+ venus_opp_table: opp-table {
compatible = "operating-points-v2";
opp-133330000 {
"ahb",
"core";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
- assigned-clock-rates = <300000000>;
-
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
"lut",
"core",
"vsync";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>;
- assigned-clock-rates = <300000000>,
- <19200000>,
+ assigned-clock-rates = <19200000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SC7280_CX>;
interrupt-parent = <&mdss>;
interrupts = <14>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_EDP_CLKREF_EN>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
- clock-names = "core_xo",
- "core_ref",
- "core_iface",
+ clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
- #clock-cells = <1>;
assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
operating-points-v2 = <&edp_opp_table>;
power-domains = <&rpmhpd SC7280_CX>;
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
ports {
mdss_dp: displayport-controller@ae90000 {
compatible = "qcom,sc7280-dp";
- reg = <0 0x0ae90000 0 0x1400>;
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0xc00>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
- clock-names = "core_iface",
+ clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
- #clock-cells = <1>;
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sc7280-aoss-qmp";
+ compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
function = "edp_hot";
};
+ mi2s0_data0: mi2s0-data0 {
+ pins = "gpio98";
+ function = "mi2s0_data0";
+ };
+
+ mi2s0_data1: mi2s0-data1 {
+ pins = "gpio99";
+ function = "mi2s0_data1";
+ };
+
+ mi2s0_mclk: mi2s0-mclk {
+ pins = "gpio96";
+ function = "pri_mi2s";
+ };
+
+ mi2s0_sclk: mi2s0-sclk {
+ pins = "gpio97";
+ function = "mi2s0_sck";
+ };
+
+ mi2s0_ws: mi2s0-ws {
+ pins = "gpio100";
+ function = "mi2s0_ws";
+ };
+
+ mi2s1_data0: mi2s1-data0 {
+ pins = "gpio107";
+ function = "mi2s1_data0";
+ };
+
+ mi2s1_sclk: mi2s1-sclk {
+ pins = "gpio106";
+ function = "mi2s1_sck";
+ };
+
+ mi2s1_ws: mi2s1-ws {
+ pins = "gpio108";
+ function = "mi2s1_ws";
+ };
+
pcie1_clkreq_n: pcie1-clkreq-n {
pins = "gpio79";
function = "pcie1_clkreqn";
};
};
- imem@146a5000 {
- compatible = "qcom,sc7280-imem", "syscon";
+ sram@146a5000 {
+ compatible = "qcom,sc7280-imem", "syscon", "simple-mfd";
reg = <0 0x146a5000 0 0x6000>;
#address-cells = <1>;
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+ model = "Qualcomm SC8280XP CRD";
+ compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
+
+ aliases {
+ serial0 = &qup2_uart17;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmc8280c_lpg 3 1000000>;
+ enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_bl>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_BL";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_3p3_reg_en>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&apps_rsc {
+ pmc8280-1-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-l3-l5-supply = <&vreg_s11b>;
+
+ vreg_s11b: smps11 {
+ regulator-name = "vreg_s11b";
+ regulator-min-microvolt = <1272000>;
+ regulator-max-microvolt = <1272000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+ };
+
+ pmc8280c-rpmh-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13c: ldo13 {
+ regulator-name = "vreg_l13c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pmc8280-2-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-l4-supply = <&vreg_s11b>;
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4d: ldo4 {
+ regulator-name = "vreg_l4d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6d: ldo6 {
+ regulator-name = "vreg_l6d";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7d: ldo7 {
+ regulator-name = "vreg_l7d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9d: ldo9 {
+ regulator-name = "vreg_l9d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&pmc8280c_lpg {
+ status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+ status = "okay";
+};
+
+&qup0 {
+ status = "okay";
+};
+
+&qup0_i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
+
+ status = "okay";
+
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&qup1 {
+ status = "okay";
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&qup2_i2c5 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
+
+ status = "okay";
+
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+
+ keyboard@68 {
+ compatible = "hid-over-i2c";
+ reg = <0x68>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&qup2_uart17 {
+ compatible = "qcom,geni-debug-uart";
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7c>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l3d>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l6b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l9d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l9d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l4b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l13c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
+
+&pmc8280_1_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio8";
+ function = "normal";
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio9";
+ function = "normal";
+ };
+
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&pmc8280c_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio8";
+ function = "func1";
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+
+ kybd_default: kybd-default-state {
+ disable {
+ pins = "gpio102";
+ function = "gpio";
+ output-low;
+ };
+
+ int-n {
+ pins = "gpio104";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset {
+ pins = "gpio105";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ qup0_i2c4_default: qup0-i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ qup2_i2c5_default: qup2-i2c5-default-state {
+ pins = "gpio81", "gpio82";
+ function = "qup21";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ tpad_default: tpad-default-state {
+ int-n {
+ pins = "gpio182";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ int-n {
+ pins = "gpio175";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio99";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+ model = "Lenovo ThinkPad X13s";
+ compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmc8280c_lpg 3 1000000>;
+ enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_bl>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_3p3_reg_en>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&apps_rsc {
+ pmc8280-1-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-l3-l5-supply = <&vreg_s11b>;
+
+ vreg_s11b: smps11 {
+ regulator-name = "vreg_s11b";
+ regulator-min-microvolt = <1272000>;
+ regulator-max-microvolt = <1272000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
+ };
+ };
+
+ pmc8280c-rpmh-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l12c: ldo12 {
+ regulator-name = "vreg_l12c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13c: ldo13 {
+ regulator-name = "vreg_l13c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pmc8280-2-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-l4-supply = <&vreg_s11b>;
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4d: ldo4 {
+ regulator-name = "vreg_l4d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7d: ldo7 {
+ regulator-name = "vreg_l7d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9d: ldo9 {
+ regulator-name = "vreg_l9d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&pmc8280c_lpg {
+ status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+ status = "okay";
+};
+
+&qup0 {
+ status = "okay";
+};
+
+&qup0_i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
+
+ status = "okay";
+
+ /* FIXME: verify */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&qup1 {
+ status = "okay";
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&qup2_i2c5 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
+
+ status = "okay";
+
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+
+ keyboard@68 {
+ compatible = "hid-over-i2c";
+ reg = <0x68>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
+
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l9d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l9d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l4b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l13c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8280_1_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio8";
+ function = "normal";
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio9";
+ function = "normal";
+ };
+
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&pmc8280c_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio8";
+ function = "func1";
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+
+ kybd_default: kybd-default-state {
+ disable {
+ pins = "gpio102";
+ function = "gpio";
+ output-low;
+ };
+
+ int-n {
+ pins = "gpio104";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset {
+ pins = "gpio105";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ qup0_i2c4_default: qup0-i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ qup2_i2c5_default: qup2-i2c5-default-state {
+ pins = "gpio81", "gpio82";
+ function = "qup21";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ tpad_default: tpad-default-state {
+ int-n {
+ pins = "gpio182";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ int-n {
+ pins = "gpio175";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio99";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmk8280: pmic@0 {
+ compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmk8280_pon: pon@1300 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x1300>;
+
+ pmk8280_pon_pwrkey: pwrkey {
+ compatible = "qcom,pmk8350-pwrkey";
+ interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ status = "disabled";
+ };
+ };
+ };
+
+ pmc8280_1: pmic@1 {
+ compatible = "qcom,pm8350", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmc8280_1_gpios: gpio@8800 {
+ compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmc8280_1_gpios 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmc8280c: pmic@2 {
+ compatible = "qcom,pm8350c", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmc8280c_gpios: gpio@8800 {
+ compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmc8280c_gpios 0 0 9>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pmc8280c_lpg: lpg@e800 {
+ compatible = "qcom,pm8350c-pwm";
+ reg = <0xe800>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+ };
+
+ pmc8280_2: pmic@3 {
+ compatible = "qcom,pm8350", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmc8280_2_gpios: gpio@8800 {
+ compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmc8280_2_gpios 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmr735a: pmic@4 {
+ compatible = "qcom,pmr735a", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmr735a_gpios: gpio@8800 {
+ compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmr735a_gpios 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sc8280xp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ };
+ opp-499200000 {
+ opp-hz = /bits/ 64 <499200000>;
+ };
+ opp-595200000 {
+ opp-hz = /bits/ 64 <595200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ };
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ };
+ opp-1881600000 {
+ opp-hz = /bits/ 64 <1881600000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ };
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ };
+ opp-2227200000 {
+ opp-hz = /bits/ 64 <2227200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ };
+ opp-2438400000 {
+ opp-hz = /bits/ 64 <2438400000>;
+ };
+ };
+
+ cpu4_opp_table: cpu4-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ };
+ opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ };
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ };
+ opp-2169600000 {
+ opp-hz = /bits/ 64 <2169600000>;
+ };
+ opp-2284800000 {
+ opp-hz = /bits/ 64 <2284800000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ };
+ opp-2496000000 {
+ opp-hz = /bits/ 64 <2496000000>;
+ };
+ opp-2592000000 {
+ opp-hz = /bits/ 64 <2592000000>;
+ };
+ opp-2688000000 {
+ opp-hz = /bits/ 64 <2688000000>;
+ };
+ opp-2803200000 {
+ opp-hz = /bits/ 64 <2803200000>;
+ };
+ opp-2899200000 {
+ opp-hz = /bits/ 64 <2899200000>;
+ };
+ opp-2995200000 {
+ opp-hz = /bits/ 64 <2995200000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_100>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_200>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_300>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_400>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_500>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_600>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_700>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <355>;
+ exit-latency-us = <909>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <241>;
+ exit-latency-us = <1461>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x4100c344>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sc8280xp", "qcom,scm";
+ };
+ };
+
+ aggre1_noc: interconnect-aggre1-noc {
+ compatible = "qcom,sc8280xp-aggre1-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect-aggre2-noc {
+ compatible = "qcom,sc8280xp-aggre2-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ clk_virt: interconnect-clk-virt {
+ compatible = "qcom,sc8280xp-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ config_noc: interconnect-config-noc {
+ compatible = "qcom,sc8280xp-config-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ dc_noc: interconnect-dc-noc {
+ compatible = "qcom,sc8280xp-dc-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect-gem-noc {
+ compatible = "qcom,sc8280xp-gem-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_noc: interconnect-lpass-ag-noc {
+ compatible = "qcom,sc8280xp-lpass-ag-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-mc-virt {
+ compatible = "qcom,sc8280xp-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect-mmss-noc {
+ compatible = "qcom,sc8280xp-mmss-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ nspa_noc: interconnect-nspa-noc {
+ compatible = "qcom,sc8280xp-nspa-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ nspb_noc: interconnect-nspb-noc {
+ compatible = "qcom,sc8280xp-nspb-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect-system-noc {
+ compatible = "qcom,sc8280xp-system-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
+ };
+
+ qup_opp_table_100mhz: qup-100mhz-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ reserved-region@80000000 {
+ reg = <0 0x80000000 0 0x860000>;
+ no-map;
+ };
+
+ cmd_db: cmd-db-region@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x80860000 0 0x20000>;
+ no-map;
+ };
+
+ reserved-region@80880000 {
+ reg = <0 0x80880000 0 0x80000>;
+ no-map;
+ };
+
+ smem_mem: smem-region@80900000 {
+ compatible = "qcom,smem";
+ reg = <0 0x80900000 0 0x200000>;
+ no-map;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ reserved-region@80b00000 {
+ reg = <0 0x80b00000 0 0x100000>;
+ no-map;
+ };
+
+ reserved-region@83b00000 {
+ reg = <0 0x83b00000 0 0x1700000>;
+ no-map;
+ };
+
+ reserved-region@85b00000 {
+ reg = <0 0x85b00000 0 0xc00000>;
+ no-map;
+ };
+
+ pil_adsp_mem: adsp-region@86c00000 {
+ reg = <0 0x86c00000 0 0x2000000>;
+ no-map;
+ };
+
+ pil_nsp0_mem: cdsp0-region@8a100000 {
+ reg = <0 0x8a100000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_nsp1_mem: cdsp1-region@8c600000 {
+ reg = <0 0x8c600000 0 0x1e00000>;
+ no-map;
+ };
+
+ reserved-region@aeb00000 {
+ reg = <0 0xaeb00000 0 0x16600000>;
+ no-map;
+ };
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-nsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_nsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_nsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-nsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_nsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_nsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sc8280xp";
+ reg = <0x0 0x00100000 0x0 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_0_ssphy>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_1_ssphy>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ };
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ qup2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0xa3 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ qup2_uart17: serial@884000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ qup2_i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+ };
+
+ qup0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x009c0000 0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x563 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ qup0_i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+ };
+
+ qup1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x83 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sc8280xp-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0xe10>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x108>,
+ <0 0x01d87600 0 0x1e0>,
+ <0 0x01d87c00 0 0x1dc>,
+ <0 0x01d87800 0 0x108>,
+ <0 0x01d87a00 0 0x1e0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ ufs_card_hc: ufs@1da4000 {
+ compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01da4000 0 0x3000>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_card_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_CARD_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_CARD_GDSC>;
+
+ iommus = <&apps_smmu 0x4a0 0x0>;
+
+ clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+ <&gcc GCC_UFS_CARD_AHB_CLK>,
+ <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
+
+ ufs_card_phy: phy@1da7000 {
+ compatible = "qcom,sc8280xp-qmp-ufs-phy";
+ reg = <0 0x01da7000 0 0xe10>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+ <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+
+ resets = <&ufs_card_hc 0>;
+ reset-names = "ufsphy";
+
+ status = "disabled";
+
+ ufs_card_phy_lanes: phy@1da7400 {
+ reg = <0 0x01da7400 0 0x108>,
+ <0 0x01da7600 0 0x1e0>,
+ <0 0x01da7c00 0 0x1dc>,
+ <0 0x01da7800 0 0x108>,
+ <0 0x01da7a00 0 0x1e0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ usb_0_hsphy: phy@88e5000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e5000 0 0x400>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy0: phy@88e7000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e7000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy1: phy@88e8000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e8000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy2: phy@88e9000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e9000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy3: phy@88ea000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088ea000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_qmpphy0: phy-wrapper@88ef000 {
+ compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+ reg = <0 0x088ef000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ status = "disabled";
+
+ usb_2_ssphy0: phy@88efe00 {
+ reg = <0 0x088efe00 0 0x160>,
+ <0 0x088f0000 0 0x1ec>,
+ <0 0x088ef200 0 0x1f0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb2_phy0_pipe_clk";
+ };
+ };
+
+ usb_2_qmpphy1: phy-wrapper@88f1000 {
+ compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+ reg = <0 0x088f1000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ status = "disabled";
+
+ usb_2_ssphy1: phy@88f1e00 {
+ reg = <0 0x088f1e00 0 0x160>,
+ <0 0x088f2000 0 0x1ec>,
+ <0 0x088f1200 0 0x1f0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb2_phy1_pipe_clk";
+ };
+ };
+
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,sc8280xp-adsp-pas";
+ reg = <0 0x03000000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_LCX>,
+ <&rpmhpd SC8280XP_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
+ usb_0_qmpphy: phy-wrapper@88ec000 {
+ compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+ reg = <0 0x088ec000 0 0x1e4>,
+ <0 0x088eb000 0 0x40>,
+ <0 0x088ed000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ status = "disabled";
+
+ usb_0_ssphy: usb3-phy@88eb400 {
+ reg = <0 0x088eb400 0 0x100>,
+ <0 0x088eb600 0 0x3ec>,
+ <0 0x088ec400 0 0x1f0>,
+ <0 0x088eba00 0 0x100>,
+ <0 0x088ebc00 0 0x3ec>,
+ <0 0x088ec700 0 0x64>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb0_phy_pipe_clk_src";
+ };
+
+ usb_0_dpphy: dp-phy@88ed200 {
+ reg = <0 0x088ed200 0 0x200>,
+ <0 0x088ed400 0 0x200>,
+ <0 0x088eda00 0 0x200>,
+ <0 0x088ea600 0 0x200>,
+ <0 0x088ea800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usb_1_hsphy: phy@8902000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x08902000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_qmpphy: phy-wrapper@8904000 {
+ compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+ reg = <0 0x08904000 0 0x1e4>,
+ <0 0x08903000 0 0x40>,
+ <0 0x08905000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB4_CLKREF_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ status = "disabled";
+
+ usb_1_ssphy: usb3-phy@8903400 {
+ reg = <0 0x08903400 0 0x100>,
+ <0 0x08903c00 0 0x3ec>,
+ <0 0x08904400 0 0x1f0>,
+ <0 0x08903a00 0 0x100>,
+ <0 0x08903c00 0 0x3ec>,
+ <0 0x08904200 0 0x18>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb1_phy_pipe_clk_src";
+ };
+
+ usb_1_dpphy: dp-phy@8904200 {
+ reg = <0 0x08904200 0 0x200>,
+ <0 0x08904400 0 0x200>,
+ <0 0x08904a00 0 0x200>,
+ <0 0x08904600 0 0x200>,
+ <0 0x08904800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ system-cache-controller@9200000 {
+ compatible = "qcom,sc8280xp-llcc";
+ reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb_0: usb@a6f8800 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_0_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x820 0x0>;
+ phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_1: usb@a8f8800 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xcd00>;
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x860 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>,
+ <40 140 14>,
+ <54 263 1>,
+ <55 306 4>,
+ <59 312 3>,
+ <62 374 2>,
+ <64 434 2>,
+ <66 438 3>,
+ <69 86 1>,
+ <70 520 54>,
+ <124 609 28>,
+ <159 638 1>,
+ <160 720 8>,
+ <168 801 1>,
+ <169 728 30>,
+ <199 416 2>,
+ <201 449 1>,
+ <202 89 1>,
+ <203 451 1>,
+ <204 462 1>,
+ <205 264 1>,
+ <206 579 1>,
+ <207 653 1>,
+ <208 656 1>,
+ <209 659 1>,
+ <210 122 1>,
+ <211 699 1>,
+ <212 705 1>,
+ <213 450 1>,
+ <214 643 1>,
+ <216 646 5>,
+ <221 390 5>,
+ <226 700 3>,
+ <229 240 3>,
+ <232 269 1>,
+ <233 377 1>,
+ <234 372 1>,
+ <235 138 1>,
+ <236 857 1>,
+ <237 860 1>,
+ <238 137 1>,
+ <239 668 1>,
+ <240 366 1>,
+ <241 949 1>,
+ <242 815 5>,
+ <247 769 1>,
+ <248 768 1>,
+ <249 663 1>,
+ <250 799 2>,
+ <252 798 1>,
+ <253 765 1>,
+ <254 763 1>,
+ <255 454 1>,
+ <258 139 1>,
+ <259 786 2>,
+ <261 370 2>,
+ <263 158 2>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <14>;
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-controller@c300000 {
+ compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x0c440000 0 0x1100>,
+ <0 0x0c600000 0 0x2000000>,
+ <0 0x0e600000 0 0x100000>,
+ <0 0x0e700000 0 0xa0000>,
+ <0 0x0c40a000 0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sc8280xp-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 230>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x20000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic-its@17a40000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17a40000 0 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x20000000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c23000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c25000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c26000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c29000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2b000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2d000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sc8280xp-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board_clk>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sc8280xp-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+
+ remoteproc_nsp0: remoteproc@1b300000 {
+ compatible = "qcom,sc8280xp-nsp0-pas";
+ reg = <0 0x1b300000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_NSP>;
+ power-domain-names = "nsp";
+
+ memory-region = <&pil_nsp0_mem>;
+
+ qcom,smem-states = <&smp2p_nsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "nsp0";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x3181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x3182 0x0420>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x3183 0x0420>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x3184 0x0420>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x3185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x3186 0x0420>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x3187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x3188 0x0420>;
+ };
+
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&apps_smmu 0x318b 0x0420>;
+ };
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&apps_smmu 0x318b 0x0420>;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x318c 0x0420>;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x318d 0x0420>;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x318e 0x0420>;
+ };
+
+ compute-cb@14 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <14>;
+ iommus = <&apps_smmu 0x318f 0x0420>;
+ };
+ };
+ };
+ };
+
+ remoteproc_nsp1: remoteproc@21300000 {
+ compatible = "qcom,sc8280xp-nsp1-pas";
+ reg = <0 0x21300000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_NSP>;
+ power-domain-names = "nsp";
+
+ memory-region = <&pil_nsp1_mem>;
+
+ qcom,smem-states = <&smp2p_nsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "nsp1";
+ qcom,remote-pid = <12>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 15>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/ {
+ model = "Inforce 6560 Single Board Computer";
+ compatible = "inforce,ifc6560", "qcom,sda660";
+ chassis-type = "embedded"; /* SBC */
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volup {
+ label = "Volume Up";
+ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ /*
+ * Until we hook up type-c detection, we
+ * have to stick with this. But it works.
+ */
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7533_out>;
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ v3p3_bck_bst: v3p3-bck-bst-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v3p3_bck_bst";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ v1p2_ldo: v1p2-ldo-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p2_ldo";
+
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ v5p0_boost: v5p0-boost-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v5p0_boost";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&adsp_pil {
+ firmware-name = "qcom/ifc6560/adsp.mbn";
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ adv7533: hdmi@39 {
+ compatible = "adi,adv7535";
+ reg = <0x39>, <0x66>;
+ reg-names = "main", "edid";
+
+ interrupt-parent = <&pm660l_gpios>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+ clock-names = "cec";
+ /*
+ * Limit to 3 lanes to prevent the bridge from changing amount
+ * of lanes in the fly. MSM DSI host doesn't like that.
+ */
+ adi,dsi-lanes = <3>;
+ avdd-supply = <&vreg_l13a_1p8>;
+ dvdd-supply = <&vreg_l13a_1p8>;
+ pvdd-supply = <&vreg_l13a_1p8>;
+ a2vdd-supply = <&vreg_l13a_1p8>;
+ v3p3-supply = <&v3p3_bck_bst>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7533_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&blsp1_dma {
+ /*
+ * The board will lock up if we toggle the BLSP clock, unless the
+ * BAM DMA interconnects support is in place.
+ */
+ /delete-property/ clocks;
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_dma {
+ /*
+ * The board will lock up if we toggle the BLSP clock, unless the
+ * BAM DMA interconnects support is in place.
+ */
+ /delete-property/ clocks;
+};
+
+&blsp2_uart1 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_l13a_1p8>;
+ vddxo-supply = <&vreg_l9a_1p8>;
+ vddrf-supply = <&vreg_l6a_1p3>;
+ vddch0-supply = <&vreg_l19a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l1a_1p225>;
+};
+
+&dsi0_out {
+ remote-endpoint = <&adv7533_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+ vcca-supply = <&vreg_l1b_0p925>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mmss_smmu {
+ status = "okay";
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEUP>;
+};
+
+&qusb2phy0 {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1b_0p925>;
+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&qusb2phy1 {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1b_0p925>;
+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+ pm660-regulators {
+ compatible = "qcom,rpm-pm660-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+ vdd_l5-supply = <&vreg_s2b_1p05>;
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+ vreg_s4a_2p04: s4 {
+ regulator-min-microvolt = <1805000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_1p35: s5 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l1a_1p225: l1 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6a_1p3: l6 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1368000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1804000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13a_1p8: l13 {
+ /* This gives power to the LPDDR4: never turn it off! */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pm660l-regulators {
+ compatible = "qcom,rpm-pm660l-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+ vdd_l2-supply = <&vreg_bob>;
+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+ vdd_l4_l6-supply = <&vreg_bob>;
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_s2b_1p05: s2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l1b_0p925: l1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <925000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2b_2p95: l2 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4b_2p95: l4 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ /*
+ * Downstream specifies a range of 1721-3600mV,
+ * but the only assigned consumers are SDHCI2 VMMC
+ * and Coresight QPDI that both request pinned 2.95V.
+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
+ * make the mmc driver happy.
+ */
+ vreg_l5b_2p95: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3328000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-system-load = <800000>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7b_3p125: l7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3125000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ vreg_l8b_3p3: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3624000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-ramp-delay = <0>;
+ };
+ };
+};
+
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+ supports-cqe;
+
+ vmmc-supply = <&vreg_l4b_2p95>;
+ vqmmc-supply = <&vreg_l8a_1p8>;
+
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&vreg_l5b_2p95>;
+ vqmmc-supply = <&vreg_l2b_2p95>;
+
+ cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+ no-sdio;
+ no-emmc;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <8 4>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+ extcon = <&extcon_usb>;
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/leds/common.h>
/ {
/* required for bootloader to select correct board */
height = <1920>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
- status= "okay";
+ status = "okay";
};
};
pinctrl-0 = <&imx300_vana_default>;
};
- gpio_keys {
- status = "okay";
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- camera_focus {
+ key-camera-focus {
label = "Camera Focus";
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- camera_snapshot {
+ key-camera-snapshot {
label = "Camera Snapshot";
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <15>;
};
- vol_down {
+ key-vol-down {
label = "Volume Down";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
/* HCI Bluetooth */
};
+&pm660l_lpg {
+ qcom,power-source = <1>;
+
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
linux,code = <KEY_VOLUMEUP>;
};
-&qusb2phy {
+&qusb2phy0 {
status = "okay";
vdd-supply = <&vreg_l1b_0p925>;
};
};
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
&sdhc_1 {
status = "okay";
supports-cqe;
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
};
qfprom: qfprom@780000 {
- compatible = "qcom,qfprom";
+ compatible = "qcom,sdm630-qfprom", "qcom,qfprom";
reg = <0x00780000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
qusb2_hstx_trim: hstx-trim@240 {
- reg = <0x240 0x1>;
- bits = <25 3>;
+ reg = <0x243 0x1>;
+ bits = <1 3>;
};
gpu_speed_bin: gpu-speed-bin@41a0 {
- reg = <0x41a0 0x1>;
- bits = <21 7>;
+ reg = <0x41a2 0x1>;
+ bits = <5 7>;
};
};
bias-pull-up;
drive-strength = <10>;
};
-
- sd-cd {
- pins = "gpio54";
- bias-pull-up;
- drive-strength = <2>;
- };
};
sdc2_state_off: sdc2-off {
bias-pull-up;
drive-strength = <2>;
};
-
- sd-cd {
- pins = "gpio54";
- bias-disable;
- drive-strength = <2>;
- };
};
};
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
- interconnects = <&gnoc 1 &bimc 5>;
+ interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
interconnect-names = "gfx-mem";
operating-points-v2 = <&gpu_sdm630_opp_table>;
+ status = "disabled";
+
gpu_sdm630_opp_table: opp-table {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2";
opp-775000000 {
opp-hz = /bits/ 64 <775000000>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
* haven't seen any devices making use of it.
*/
maximum-speed = "high-speed";
- phys = <&qusb2phy>;
+ phys = <&qusb2phy0>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
- qusb2phy: phy@c012000 {
+ qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ <&gcc GCC_RX0_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
status = "disabled";
};
- sdhc_2: sdhci@c084000 {
+ qusb2phy1: phy@c014000 {
+ compatible = "qcom,sdm660-qusb2-phy";
+ reg = <0x0c014000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+ status = "disabled";
+ };
+
+ sdhc_2: mmc@c084000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c084000 0x1000>;
reg-names = "hc";
interrupt-names = "hc_irq", "pwr_irq";
bus-width = <4>;
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
- clock-names = "core", "iface", "xo";
+ clock-names = "iface", "core", "xo";
+
interconnects = <&a2noc 3 &a2noc 10>,
<&gnoc 0 &cnoc 28>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
operating-points-v2 = <&sdhc2_opp_table>;
pinctrl-names = "default", "sleep";
};
};
- sdhc_1: sdhci@c0c4000 {
+ sdhc_1: mmc@c0c4000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c0c4000 0x1000>,
<0x0c0c5000 0x1000>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
- clock-names = "core", "iface", "xo", "ice";
+ clock-names = "iface", "core", "xo", "ice";
interconnects = <&a2noc 2 &a2noc 10>,
<&gnoc 0 &cnoc 27>;
- interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
+ interconnect-names = "sdhc-ddr", "cpu-sdhc";
operating-points-v2 = <&sdhc1_opp_table>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_state_on>;
};
};
+ usb2: usb@c2f8800 {
+ compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+ reg = <0x0c2f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core",
+ "mock_utmi", "sleep";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <60000000>;
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ qcom,select-utmi-as-pipe-clk;
+
+ resets = <&gcc GCC_USB_20_BCR>;
+
+ usb2_dwc3: usb@c200000 {
+ compatible = "snps,dwc3";
+ reg = <0x0c200000 0xc8d0>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+
+ /* This is the HS-only host */
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy1>;
+ phy-names = "usb2-phy";
+ snps,hird-threshold = /bits/ 8 <0>;
+ };
+ };
+
mmcc: clock-controller@c8c0000 {
compatible = "qcom,mmcc-sdm630";
reg = <0x0c8c0000 0x40000>;
<0>;
};
- dsi_opp_table: dsi-opp-table {
+ dsi_opp_table: opp-table-dsi {
compatible = "operating-points-v2";
opp-131250000 {
};
};
- mdp_opp_table: mdp-opp {
+ mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-150000000 {
phys = <&dsi0_phy>;
phy-names = "dsi";
+ status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
clock-names = "iface", "ref";
+ status = "disabled";
};
};
status = "disabled";
};
- imem@146bf000 {
- compatible = "simple-mfd";
+ sram@146bf000 {
+ compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
reg = <0x146bf000 0x1000>;
#address-cells = <1>;
camss: camss@ca00000 {
compatible = "qcom,sdm660-camss";
- reg = <0x0c824000 0x1000>,
+ reg = <0x0ca00020 0x10>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0c824000 0x1000>,
<0x0ca00120 0x4>,
<0x0c825000 0x1000>,
<0x0ca00124 0x4>,
<0x0c826000 0x1000>,
<0x0ca00128 0x4>,
- <0x0ca30000 0x100>,
- <0x0ca30400 0x100>,
- <0x0ca30800 0x100>,
- <0x0ca30c00 0x100>,
<0x0ca31000 0x500>,
- <0x0ca00020 0x10>,
<0x0ca10000 0x1000>,
<0x0ca14000 0x1000>;
- reg-names = "csiphy0",
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
"csiphy1_clk_mux",
"csiphy2",
"csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
"ispif",
- "csi_clk_mux",
"vfe0",
"vfe1";
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csiphy2",
- "csid0",
+ interrupt-names = "csid0",
"csid1",
"csid2",
"csid3",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
"ispif",
"vfe0",
"vfe1";
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc THROTTLE_CAMSS_AXI_CLK>,
- <&mmcc CAMSS_ISPIF_AHB_CLK>,
- <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI0_AHB_CLK>,
- <&mmcc CAMSS_CSI0_CLK>,
- <&mmcc CAMSS_CPHY_CSID0_CLK>,
- <&mmcc CAMSS_CSI0PIX_CLK>,
- <&mmcc CAMSS_CSI0RDI_CLK>,
- <&mmcc CAMSS_CSI1_AHB_CLK>,
- <&mmcc CAMSS_CSI1_CLK>,
- <&mmcc CAMSS_CPHY_CSID1_CLK>,
- <&mmcc CAMSS_CSI1PIX_CLK>,
- <&mmcc CAMSS_CSI1RDI_CLK>,
- <&mmcc CAMSS_CSI2_AHB_CLK>,
- <&mmcc CAMSS_CSI2_CLK>,
- <&mmcc CAMSS_CPHY_CSID2_CLK>,
- <&mmcc CAMSS_CSI2PIX_CLK>,
- <&mmcc CAMSS_CSI2RDI_CLK>,
- <&mmcc CAMSS_CSI3_AHB_CLK>,
- <&mmcc CAMSS_CSI3_CLK>,
- <&mmcc CAMSS_CPHY_CSID3_CLK>,
- <&mmcc CAMSS_CSI3PIX_CLK>,
- <&mmcc CAMSS_CSI3RDI_CLK>,
- <&mmcc CAMSS_AHB_CLK>,
- <&mmcc CAMSS_VFE0_CLK>,
- <&mmcc CAMSS_CSI_VFE0_CLK>,
- <&mmcc CAMSS_VFE0_AHB_CLK>,
- <&mmcc CAMSS_VFE0_STREAM_CLK>,
- <&mmcc CAMSS_VFE1_CLK>,
- <&mmcc CAMSS_CSI_VFE1_CLK>,
- <&mmcc CAMSS_VFE1_AHB_CLK>,
- <&mmcc CAMSS_VFE1_STREAM_CLK>,
- <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
- <&mmcc CAMSS_VFE_VBIF_AXI_CLK>,
- <&mmcc CSIPHY_AHB2CRIF_CLK>,
- <&mmcc CAMSS_CPHY_CSID0_CLK>,
- <&mmcc CAMSS_CPHY_CSID1_CLK>,
- <&mmcc CAMSS_CPHY_CSID2_CLK>,
- <&mmcc CAMSS_CPHY_CSID3_CLK>;
- clock-names = "top_ahb",
- "throttle_axi",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csiphy2_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "csi2_ahb",
- "csi2",
- "csi2_phy",
- "csi2_pix",
- "csi2_rdi",
- "csi3_ahb",
- "csi3",
- "csi3_phy",
- "csi3_pix",
- "csi3_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe0_ahb",
- "vfe0_stream",
- "vfe1",
- "csi_vfe1",
- "vfe1_ahb",
- "vfe1_stream",
- "vfe_ahb",
- "vfe_axi",
- "csiphy_ahb2crif",
- "cphy_csid0",
- "cphy_csid1",
- "cphy_csid2",
- "cphy_csid3";
+ clocks = <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CSIPHY_AHB2CRIF_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+ clock-names = "ahb",
+ "cphy_csid0",
+ "cphy_csid1",
+ "cphy_csid2",
+ "cphy_csid3",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csiphy_ahb2crif",
+ "csi_vfe0",
+ "csi_vfe1",
+ "ispif_ahb",
+ "throttle_axi",
+ "top_ahb",
+ "vfe0_ahb",
+ "vfe0",
+ "vfe0_stream",
+ "vfe1_ahb",
+ "vfe1",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
interconnects = <&mnoc 5 &bimc 5>;
interconnect-names = "vfe-mem";
iommus = <&mmss_smmu 0xc00>,
label = "lpass";
mboxes = <&apcs_glb 9>;
qcom,remote-pid = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
apr {
compatible = "qcom,apr-v2";
gpio-keys {
compatible = "gpio-keys";
- volume-up {
+ key-volume-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
};
&sdc2_state_on {
- pinconf-clk {
+ clk {
drive-strength = <14>;
};
};
gpio-keys {
compatible = "gpio-keys";
- volup {
+ key-volup {
label = "Volume Up";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
linux,code = <KEY_VOLUMEDOWN>;
};
-&qusb2phy {
+&qusb2phy0 {
status = "okay";
vdd-supply = <&vreg_l1b_0p925>;
};
};
+&pm660l_wled {
+ status = "okay";
+
+ qcom,switching-freq = <800>;
+ qcom,current-limit-microamp = <20000>;
+ qcom,num-strings = <2>;
+};
+
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
&sdhc_1 {
status = "okay";
supports-cqe;
operating-points-v2 = <&gpu_sdm660_opp_table>;
gpu_sdm660_opp_table: opp-table {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2";
/*
* 775MHz is only available on the highest speed bin
phys = <&dsi1_phy>;
phy-names = "dsi";
+ status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
+ status = "disabled";
};
};
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
};
panel: panel {
- compatible ="innolux,p120zdg-bf1";
+ compatible = "innolux,p120zdg-bf1";
power-supply = <&pp3300_dx_edp>;
backlight = <&backlight>;
no-hpd;
};
};
+&psci {
+ /delete-node/ cpu0;
+ /delete-node/ cpu1;
+ /delete-node/ cpu2;
+ /delete-node/ cpu3;
+ /delete-node/ cpu4;
+ /delete-node/ cpu5;
+ /delete-node/ cpu6;
+ /delete-node/ cpu7;
+ /delete-node/ cpu-cluster0;
+};
+
+&cpus {
+ /delete-node/ domain-idle-states;
+};
+
+&cpu_idle_states {
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <350>;
+ exit-latency-us = <461>;
+ min-residency-us = <1890>;
+ local-timer-stop;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <360>;
+ exit-latency-us = <531>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <264>;
+ exit-latency-us = <621>;
+ min-residency-us = <952>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <1061>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "cluster-power-down";
+ arm,psci-suspend-param = <0x400000F4>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+};
+
+&CPU0 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU1 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU2 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU3 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU4 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU5 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU6 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
+&CPU7 {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
+};
+
/*
* Reserved memory changes
*
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>;
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
leds {
compatible = "gpio-leds";
- user4 {
+ led-0 {
label = "green:user4";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "panic-indicator";
default-state = "off";
};
- wlan {
+ led-1 {
label = "yellow:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt {
+ led-2 {
label = "blue:bt";
+ function = LED_FUNCTION_BLUETOOTH;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
status = "okay";
};
+&gpi_dma1 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
zap-shader {
&i2c11 {
/* On Low speed expansion */
+ clock-frequency = <100000>;
label = "LS-I2C1";
status = "okay";
};
&i2c14 {
/* On Low speed expansion */
+ clock-frequency = <100000>;
label = "LS-I2C0";
status = "okay";
};
"OPTION2",
"PM845_SLB";
- cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
+ cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
pins = "gpio12";
function = "normal";
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
+ cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
pins = "gpio10";
function = "normal";
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
};
};
+&pmi8998_lpg {
+ status = "okay";
+
+ qcom,power-source = <1>;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <3>;
+
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+};
+
/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
&q6afedai {
qi2s@22 {
- reg = <22>;
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0 1 2 3>;
};
};
};
codec {
- sound-dai = <<9611_codec 0>;
+ sound-dai = <<9611_codec 0>;
};
};
};
codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
};
};
};
&camss {
- vdda-supply = <&vreg_l1a_0p875>;
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l26a_1p2>;
status = "ok";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 / V35 (judyln / judyp) common device tree
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &qseecom_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ qseecom_mem: memory@b2000000 {
+ reg = <0 0xb2000000 0 0x1800000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c415000 {
+ reg = <0 0x8c415000 0 0x2000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x10000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1e00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8e300000 {
+ reg = <0 0x8e300000 0 0x100000>;
+ no-map;
+ };
+
+ mpss_region: memory@8e400000 {
+ reg = <0 0x8e400000 0 0x8900000>;
+ no-map;
+ };
+
+ venus_mem: memory@96d00000 {
+ reg = <0 0x96d00000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@97200000 {
+ reg = <0 0x97200000 0 0x800000>;
+ no-map;
+ };
+
+ mba_region: memory@97a00000 {
+ reg = <0 0x97a00000 0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@97c00000 {
+ reg = <0 0x97c00000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@99000000 {
+ reg = <0 0x99000000 0 0x100000>;
+ no-map;
+ };
+
+ /* Framebuffer region */
+ memory@9d400000 {
+ reg = <0x0 0x9d400000 0x0 0x2400000>;
+ no-map;
+ };
+
+ /* rmtfs lower guard */
+ memory@f0800000 {
+ reg = <0 0xf0800000 0 0x1000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f0801000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf0801000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ /* rmtfs upper guard */
+ memory@f0a01000 {
+ reg = <0 0xf0a01000 0 0x1000>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_pin_a>;
+
+ label = "GPIO Buttons";
+
+ key-vol-up {
+ label = "Volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2a_1p125: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_2p7: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+};
+
+&dispcc {
+ status = "disabled";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ };
+};
+
+&ipa {
+ status = "okay";
+ modem-init;
+};
+
+&mss_pil {
+ status = "okay";
+};
+
+&pm8998_pon {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vddpx_2>;
+};
+
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: these devices have usb id pin */
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&tlmm {
+ gpio-reserved-ranges = <28 4>, <81 4>;
+
+ sdc2_clk: sdc2-clk {
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16 on clk, cmd, and data pins.
+ *
+ * TODO: copy-pasted from mtp, try other values
+ * on these devices.
+ */
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_cmd: sdc2-cmd {
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_data: sdc2-data {
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sd_card_det_n: sd-card-det-n {
+ pinmux {
+ pins = "gpio126";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio126";
+ bias-pull-up;
+ };
+ };
+};
+
+&pm8998_gpio {
+ vol_up_pin_a: vol-up-active-pins {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 (judyln) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+ model = "LG G7 ThinQ";
+ compatible = "lg,judyln", "qcom,sdm845";
+
+ chosen {
+ framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>;
+ width = <1440>;
+ height = <3120>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ lab-supply = <&lab>;
+ ibb-supply = <&ibb>;
+ };
+ };
+
+ /* Additional ThinQ key */
+ gpio-keys {
+ pinctrl-0 = <&vol_up_pin_a &thinq_key_default>;
+
+ key-thinq {
+ label = "ThinQ";
+ linux,code = <KEY_ASSISTANT>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/sdm845/judyln/adsp.mbn";
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn";
+};
+
+&tlmm {
+ thinq_key_default: thinq-key-default {
+ pins = "gpio89";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG V35 (judyp) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+ model = "LG V35 ThinQ";
+ compatible = "lg,judyp", "qcom,sdm845";
+
+ chosen {
+ framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>;
+ width = <1440>;
+ height = <2880>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/sdm845/judyp/adsp.mbn";
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn";
+};
pinctrl-names = "default";
pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
- vol-down {
+ key-vol-down {
label = "Volume down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
- vol-up {
+ key-vol-up {
label = "Volume up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
};
&pm8998_gpio {
- volume_down_gpio: pm8998_gpio5 {
+ volume_down_gpio: pm8998-gpio5-state {
pinconf {
pins = "gpio5";
function = "normal";
};
};
- volume_up_gpio: pm8998_gpio6 {
+ volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
/*
* Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
* Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
- vol-up {
+ key-vol-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
};
&i2c5 {
- status="okay";
+ status = "okay";
touchscreen@38 {
compatible = "focaltech,fts8719";
};
&pm8998_gpio {
- volume_up_gpio: pm8998_gpio6 {
+ volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
};
};
+&pmi8998_lpg {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&qup_uart9_default {
pinconf-rx {
pins = "gpio5";
};
&vreg_l22a_2p8 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
+ /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <2696000>;
};
&vreg_l28a_2p8 {
/* Neither Camera Focus, nor Camera Shutter seem to work... */
- vol-down {
+ key-vol-down {
label = "volume_down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>;
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
};
&pm8998_gpio {
- vol_up_pin_a: vol-up-active {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
&q6afedai {
qi2s@22 {
- reg = <22>;
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
};
};
codec {
- sound-dai = <&wcd9340 0>;
+ sound-dai = <&wcd9340 0>;
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
+ * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+
+/ {
+ model = "Xiaomi Mi MIX 2S";
+ compatible = "xiaomi,polaris", "qcom,sdm845";
+ chassis-type = "handset";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0x141 0x20001>;
+ qcom,board-id = <0x2a 0x0>;
+
+ aliases {
+ serial0 = &uart9;
+ serial1 = &uart6;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&volume_up_gpio>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1e00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8e300000 {
+ reg = <0 0x8e300000 0 0x100000>;
+ no-map;
+ };
+
+ mpss_region: memory@8e400000 {
+ reg = <0 0x8e400000 0 0x7800000>;
+ no-map;
+ };
+
+ venus_mem: memory@95c00000 {
+ reg = <0 0x95c00000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@96100000 {
+ reg = <0 0x96100000 0 0x800000>;
+ no-map;
+ };
+
+ mba_region: memory@96900000 {
+ reg = <0 0x96900000 0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@96b00000 {
+ reg = <0 0x96b00000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@97f00000 {
+ reg = <0 0x97f00000 0 0x100000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f6301000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf6301000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+
+ charge-full-design-microamp-hours = <3400000>;
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4400000>;
+ };
+
+ vreg_tp_vddio: vreg-tp-vddio {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_tp_vddio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 23 0>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ vreg_s4a_1p8: vreg-s4a-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s2a_1p1: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdda_mipi_dsi0_pll:
+ vdda_ufs1_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p95: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p05: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l18a_2p9: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a_3p1: ldo19 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_3p3: ldo22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vdda_mipi_dsi0_1p2:
+ vdda_ufs1_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_smp3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/sdm845/polaris/cdsp.mbn";
+ status = "okay";
+};
+
+&dsi0 {
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+ status = "okay";
+
+ display_panel: panel@0 {
+ compatible = "jdi,fhd-nt35596s";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ backlight = <&pmi8998_wled>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sde_dsi_active>;
+ pinctrl-1 = <&sde_dsi_suspend>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ status = "okay";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
+ };
+};
+
+&ibb {
+ regulator-min-microvolt = <4600000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-over-current-protection;
+ regulator-pull-down;
+ regulator-soft-start;
+ qcom,discharge-resistor-kohms = <300>;
+};
+
+&ipa {
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
+ status = "okay";
+};
+
+&i2c14 {
+ clock-frequency = <400000>;
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 125 0x2008>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ts_int_default &ts_reset_default>;
+ pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+
+ vdd-supply = <&vreg_l28a_3p0>;
+ vio-supply = <&vreg_tp_vddio>;
+
+ syna,startup-delay-ms = <0xc8>;
+ syna,reset-delay-ms = <0xc8>;
+
+ rmi4-f01@1 {
+ syna,nosleep-mode = <0x1>;
+ reg = <0x1>;
+ };
+
+ rmi4-f12@12 {
+ syna,rezero-wait-ms = <0xc8>;
+ syna,clip-x-high = <0x438>;
+ syna,clip-y-high = <0x870>;
+ syna,sensor-type = <0x1>;
+ syna,clip-x-low = <0x0>;
+ syna,clip-y-low = <0x0>;
+ };
+ };
+};
+
+&lab {
+ regulator-min-microvolt = <4600000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-soft-start;
+ regulator-pull-down;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mss_pil {
+ firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
+ status = "okay";
+};
+
+&pmi8998_wled {
+ qcom,current-limit-microamp = <20000>;
+ qcom,current-boost-limit = <970>;
+ qcom,ovp-millivolt = <19600>;
+ qcom,switching-freq = <600>;
+ qcom,num-strings = <4>;
+ qcom,cabc;
+
+ status = "okay";
+};
+
+&pm8998_gpio {
+ volume_up_gpio: pm8998_gpio6 {
+ pinconf {
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ function = "normal";
+ pins = "gpio6";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+};
+
+&pm8998_pon {
+ resin {
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ compatible = "qcom,pm8941-resin";
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+};
+
+&q6afedai {
+ qi2s@22 {
+ reg = <22>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qup_i2c14_default {
+ pinconf {
+ pins = "gpio33", "gpio34";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ ts_reset_default: ts-reset-default {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <16>;
+ output-high;
+ };
+
+ ts_int_default: ts-int-default {
+ pins = "gpio125";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <16>;
+ input-enable;
+ };
+
+ ts_reset_sleep: ts-reset-sleep {
+ pins = "gpio99";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ ts_int_sleep: ts-int-sleep {
+ pins = "gpio125";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ };
+
+ sde_dsi_active: sde-dsi-active {
+ pins = "gpio6", "gpio10";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
+ };
+
+ sde_dsi_suspend: sde-dsi-suspend {
+ pins = "gpio6", "gpio10";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wcd_intr_default: wcd-intr-default {
+ pins = "goui54";
+ function = "gpio";
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ /* This path is relative to the qca/ subdir under lib/firmware. */
+ firmware-name = "polaris/crnv21.bin";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&usb_1 {
+ /* We'll use this as USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+
+ /* Fastest mode for USB 2 */
+ maximum-speed = "high-speed";
+
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdd-supply = <&vreg_l1a_0p875>;
+
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,imp-res-offset-value = <8>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-pll-supply = <&vreg_l1a_0p875>;
+ vdda-phy-supply = <&vreg_l26a_1p2>;
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <800000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sdm845/polaris/venus.mbn";
+ status = "okay";
+};
+
+&wcd9340 {
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ reset-gpios = <&tlmm 64 0>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+
+ qcom,micbias1-microvolt = <2700000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <2700000>;
+ qcom,micbias4-microvolt = <2700000>;
+};
+
+&wifi {
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+ qcom,snoc-host-cap-skip-quirk;
+ status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-disable;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
};
};
- cpus {
+ cpus: cpus {
#address-cells = <2>;
#size-cells = <0>;
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <611>;
dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "qcom,kryo385";
reg = <0x0 0x100>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <611>;
dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
L2_100: l2-cache {
compatible = "qcom,kryo385";
reg = <0x0 0x200>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <611>;
dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
L2_200: l2-cache {
compatible = "qcom,kryo385";
reg = <0x0 0x300>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <611>;
dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
next-level-cache = <&L2_300>;
L2_300: l2-cache {
compatible = "cache";
reg = <0x0 0x400>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
L2_400: l2-cache {
reg = <0x0 0x500>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
L2_500: l2-cache {
reg = <0x0 0x600>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
L2_600: l2-cache {
reg = <0x0 0x700>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
L2_700: l2-cache {
};
};
- idle-states {
+ cpu_idle_states: idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
- idle-state-name = "little-power-down";
- arm,psci-suspend-param = <0x40000003>;
+ idle-state-name = "little-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <350>;
exit-latency-us = <461>;
min-residency-us = <1890>;
local-timer-stop;
};
- LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
- compatible = "arm,idle-state";
- idle-state-name = "little-rail-power-down";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <360>;
- exit-latency-us = <531>;
- min-residency-us = <3934>;
- local-timer-stop;
- };
-
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
- idle-state-name = "big-power-down";
- arm,psci-suspend-param = <0x40000003>;
+ idle-state-name = "big-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <264>;
exit-latency-us = <621>;
min-residency-us = <952>;
local-timer-stop;
};
+ };
- BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
- compatible = "arm,idle-state";
- idle-state-name = "big-rail-power-down";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <702>;
- exit-latency-us = <1061>;
- min-residency-us = <4488>;
- local-timer-stop;
- };
-
+ domain-idle-states {
CLUSTER_SLEEP_0: cluster-sleep-0 {
- compatible = "arm,idle-state";
- idle-state-name = "cluster-power-down";
- arm,psci-suspend-param = <0x400000F4>;
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x4100c244>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
min-residency-us = <9987>;
};
};
- cpu0_opp_table: cpu0_opp_table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu4_opp_table: cpu4_opp_table {
+ cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
};
};
- psci {
+ psci: psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: power-domain-cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: power-domain-cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: power-domain-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
};
soc: soc@0 {
clock-names = "core";
};
- qup_opp_table: qup-opp-table {
+ qup_opp_table: opp-table-qup {
compatible = "operating-points-v2";
opp-50000000 {
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
};
spi15: spi@a9c000 {
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ pmu@1436400 {
+ compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
+ reg = <0 0x01436400 0 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /*
+ * The interconnect path bandwidth taken from
+ * cpu4_opp_table bandwidth for OSM L3
+ * interconnect. This also matches the OSM L3
+ * from bandwidth table of qcom,cpu4-l3lat-mon
+ * (qcom,core-dev-table, bus width: 16 bytes)
+ * from msm-4.9 downstream kernel.
+ */
+ opp-0 {
+ opp-peak-kBps = <4800000>;
+ };
+ opp-1 {
+ opp-peak-kBps = <9216000>;
+ };
+ opp-2 {
+ opp-peak-kBps = <15052800>;
+ };
+ opp-3 {
+ opp-peak-kBps = <20889600>;
+ };
+ opp-4 {
+ opp-peak-kBps = <25497600>;
+ };
+ };
+ };
+
pcie0: pci@1c00000 {
compatible = "qcom,pcie-sdm845";
reg = <0 0x01c00000 0 0x2000>,
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
status = "disabled";
- sdhc2_opp_table: sdhc2-opp-table {
+ sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-9600000 {
};
};
- qspi_opp_table: qspi-opp-table {
+ qspi_opp_table: opp-table-qspi {
compatible = "operating-points-v2";
opp-19200000 {
qcom,apps-ch-pipes = <0x780000>;
qcom,ea-pc = <0x270>;
status = "okay";
- dmas = <&slimbam 3>, <&slimbam 4>,
+ dmas = <&slimbam 3>, <&slimbam 4>,
<&slimbam 5>, <&slimbam 6>;
dma-names = "rx", "tx", "tx2", "rx2";
wcd9340_ifd: ifd@0{
compatible = "slim217,250";
- reg = <0 0>;
+ reg = <0 0>;
};
wcd9340: codec@1{
compatible = "slim217,250";
- reg = <1 0>;
- slim-ifc-dev = <&wcd9340_ifd>;
+ reg = <1 0>;
+ slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
reg = <0xc85 0x40>;
interrupts-extended = <&wcd9340 20>;
- qcom,dout-ports = <6>;
- qcom,din-ports = <2>;
+ qcom,dout-ports = <6>;
+ qcom,din-ports = <2>;
qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
compatible = "venus-encoder";
};
- venus_opp_table: venus-opp-table {
+ venus_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
clock-names = "bi_tcxo";
};
- dsi_opp_table: dsi-opp-table {
+ dsi_opp_table: opp-table-dsi {
compatible = "operating-points-v2";
opp-19200000 {
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "core";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
- assigned-clock-rates = <300000000>;
-
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <2>;
ranges;
- mdss_mdp: mdp@ae01000 {
+ mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sdm845-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <300000000>,
- <19200000>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
};
};
- mdp_opp_table: mdp-opp-table {
+ mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
};
gmu: gmu@506a000 {
- compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0 0x506a000 0 0x30000>,
<0 0xb280000 0 0x10000>,
cell-index = <0>;
};
- imem@146bf000 {
- compatible = "simple-mfd";
+ sram@146bf000 {
+ compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
reg = <0 0x146bf000 0 0x1000>;
#address-cells = <1>;
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0 0x17184000 0 0x2a000>;
- num-channels = <31>;
+ num-channels = <31>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
};
timer@17c90000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c90000 0 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ca0000 0 0x1000>,
- <0 0x17cb0000 0 0x1000>;
+ reg = <0x17ca0000 0x1000>,
+ <0x17cb0000 0x1000>;
};
frame@17cc0000 {
frame-number = <1>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cc0000 0 0x1000>;
+ reg = <0x17cc0000 0x1000>;
status = "disabled";
};
frame@17cd0000 {
frame-number = <2>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cd0000 0 0x1000>;
+ reg = <0x17cd0000 0x1000>;
status = "disabled";
};
frame@17ce0000 {
frame-number = <3>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ce0000 0 0x1000>;
+ reg = <0x17ce0000 0x1000>;
status = "disabled";
};
frame@17cf0000 {
frame-number = <4>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cf0000 0 0x1000>;
+ reg = <0x17cf0000 0x1000>;
status = "disabled";
};
frame@17d00000 {
frame-number = <5>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d00000 0 0x1000>;
+ reg = <0x17d00000 0x1000>;
status = "disabled";
};
frame@17d10000 {
frame-number = <6>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d10000 0 0x1000>;
+ reg = <0x17d10000 0x1000>;
status = "disabled";
};
};
pinctrl-names = "default";
pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
- lid {
+ switch-lid {
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
wakeup-event-action = <EV_ACT_DEASSERTED>;
};
- mode {
+ switch-mode {
gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_TABLET_MODE>;
};
codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
};
};
};
codec {
- sound-dai = <&wcd9340 2>;
+ sound-dai = <&wcd9340 2>;
};
};
};
&crypto {
/* FIXME: qce_start triggers an SError */
- status= "disable";
+ status = "disable";
};
};
codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
};
};
};
codec {
- sound-dai = <&wcd9340 2>;
+ sound-dai = <&wcd9340 2>;
};
};
};
cpu4_opp34: opp-2956800000 {
opp-hz = /bits/ 64 <2956800000>;
opp-peak-kBps = <7216000 25497600>;
- turbo-mode;
};
};
gpio-keys {
status = "okay";
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- vol-dn {
+ key-vol-dn {
label = "Volume Down";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
status = "okay";
};
-&sdc2_state_off {
+&sdc2_off_state {
sd-cd {
pins = "gpio98";
+ drive-strength = <2>;
bias-disable;
+ };
+};
+
+&sdc2_on_state {
+ sd-cd {
+ pins = "gpio98";
drive-strength = <2>;
+ bias-pull-up;
};
};
&tlmm {
gpio-reserved-ranges = <22 2>, <28 6>;
-
- sdc2_state_on: sdc2-on {
- clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sd-cd {
- pins = "gpio98";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
};
&usb3 {
interrupt-controller;
#interrupt-cells = <2>;
- sdc2_state_off: sdc2-off {
+ sdc2_off_state: sdc2-off-state {
clk {
pins = "sdc2_clk";
- bias-disable;
drive-strength = <2>;
+ bias-disable;
};
cmd {
pins = "sdc2_cmd";
+ drive-strength = <2>;
bias-pull-up;
+ };
+
+ data {
+ pins = "sdc2_data";
drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on_state: sdc2-on-state {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
};
data {
pins = "sdc2_data";
+ drive-strength = <10>;
bias-pull-up;
- drive-strength = <2>;
};
};
};
reg = <0x045f0000 0x7000>;
};
- sdhc_1: sdhci@4744000 {
+ sdhc_1: mmc@4744000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
reg-names = "hc", "core";
power-domains = <&rpmpd SM6125_VDDCX>;
+ qcom,dll-config = <0x000f642c>;
+ qcom,ddr-config = <0x80040873>;
+
bus-width = <8>;
non-removable;
status = "disabled";
};
- sdhc_2: sdhci@4784000 {
+ sdhc_2: mmc@4784000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04784000 0x1000>;
reg-names = "hc";
<&xo_board>;
clock-names = "iface", "core", "xo";
- pinctrl-0 = <&sdc2_state_on>;
- pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-0 = <&sdc2_on_state>;
+ pinctrl-1 = <&sdc2_off_state>;
pinctrl-names = "default", "sleep";
power-domains = <&rpmpd SM6125_VDDCX>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040873>;
+
bus-width = <4>;
status = "disabled";
};
clock-names = "core";
};
- sdhc_1: sdhci@7c4000 {
+ sdhc_1: mmc@7c4000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x007c4000 0 0x1000>,
<0 0x007c5000 0 0x1000>,
clock-names = "iface", "core", "xo";
qcom,dll-config = <0x000f642c>;
qcom,ddr-config = <0x80040868>;
- power-domains = <&rpmhpd 0>;
+ power-domains = <&rpmhpd SM6350_CX>;
operating-points-v2 = <&sdhc1_opp_table>;
bus-width = <8>;
non-removable;
status = "disabled";
- sdhc1_opp_table: sdhc1-opp-table {
+ sdhc1_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
clock-names = "iface", "core", "xo";
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
- power-domains = <&rpmhpd 0>;
+ power-domains = <&rpmhpd SM6350_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
bus-width = <4>;
status = "disabled";
- sdhc2_opp_table: sdhc2-opp-table {
+ sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin>;
- volume-up {
+ key-volume-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
};
&pm6350_gpios {
- gpio_keys_pin: gpio-keys-pin {
+ gpio_keys_pin: gpio-keys-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol_up {
+ key-vol-up {
label = "Volume Up";
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
- cpu0_opp_table: cpu0_opp_table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu4_opp_table: cpu4_opp_table {
+ cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu7_opp_table: cpu7_opp_table {
+ cpu7_opp_table: opp-table-cpu7 {
compatible = "operating-points-v2";
opp-shared;
};
gmu: gmu@2c6a000 {
- compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
reg = <0 0x02c6a000 0 0x30000>,
<0 0x0b290000 0 0x10000>,
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
status = "disabled";
- sdhc2_opp_table: sdhc2-opp-table {
+ sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8150-aoss-qmp";
+ compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c26000 0x0 0x1000>;
+ reg = <0x17c26000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
* case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
*/
- vol-down {
+ key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
};
};
- cpu0_opp_table: cpu0_opp_table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu4_opp_table: cpu4_opp_table {
+ cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu7_opp_table: cpu7_opp_table {
+ cpu7_opp_table: opp-table-cpu7 {
compatible = "operating-points-v2";
opp-shared;
firmware {
scm: scm {
- compatible = "qcom,scm";
+ compatible = "qcom,scm-sm8250", "qcom,scm";
#reset-cells = <1>;
};
};
};
};
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
clock-names = "core";
};
- qup_opp_table: qup-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8250-gpi-dma";
reg = <0 0x00800000 0 0x70000>;
clock-names = "pipe0";
#phy-cells = <0>;
+
+ #clock-cells = <0>;
clock-output-names = "pcie_0_pipe_clk";
};
};
clock-names = "pipe0";
#phy-cells = <0>;
+
+ #clock-cells = <0>;
clock-output-names = "pcie_1_pipe_clk";
};
};
clock-names = "pipe0";
#phy-cells = <0>;
+
+ #clock-cells = <0>;
clock-output-names = "pcie_2_pipe_clk";
};
};
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
- clocks = <&audiocc 1>,
- <&audiocc 0>,
+ clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+ <&audiocc LPASS_CDC_WSA_NPL>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&aoncc 0>,
+ <&aoncc LPASS_CDC_VA_MCLK>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
vamacro: codec@3370000 {
compatible = "qcom,sm8250-lpass-va-macro";
reg = <0 0x03370000 0 0x1000>;
- clocks = <&aoncc 0>,
+ clocks = <&aoncc LPASS_CDC_VA_MCLK>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
};
gmu: gmu@3d6a000 {
- compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
reg = <0 0x03d6a000 0 0x30000>,
<0 0x3de0000 0 0x10000>,
};
adreno_smmu: iommu@3da0000 {
- compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
+ compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
reg = <0 0x03da0000 0 0x10000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
};
};
- sdhc_2: sdhci@8804000 {
+ sdhc_2: mmc@8804000 {
compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
status = "disabled";
- sdhc2_opp_table: sdhc2-opp-table {
+ sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
compatible = "venus-encoder";
};
- venus_opp_table: venus-opp-table {
+ venus_opp_table: opp-table {
compatible = "operating-points-v2";
opp-720000000 {
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
power-domains = <&rpmhpd SM8250_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
+ status = "disabled";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "bus", "nrt_bus", "core";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
- assigned-clock-rates = <460000000>;
-
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <2>;
ranges;
- mdss_mdp: mdp@ae01000 {
+ mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "core", "vsync";
- assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <460000000>,
- <19200000>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SM8250_MMCX>;
};
};
- mdp_opp_table: mdp-opp-table {
+ mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
status = "disabled";
- dsi_opp_table: dsi-opp-table {
+ dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-187500000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8250-aoss-qmp";
+ compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
status = "okay";
vdda-phy-supply = <&vreg_l5b_0p88>;
- vdda-max-microamp = <91600>;
vdda-pll-supply = <&vreg_l6b_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1 {
/* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
- vol-down {
+ key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
};
};
+ qup_opp_table_100mhz: opp-table-qup100mhz {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
+ qup_opp_table_120mhz: opp-table-qup120mhz {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
#mbox-cells = <2>;
};
- qup_opp_table_100mhz: qup-100mhz-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
- qup_opp_table_120mhz: qup-120mhz-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8350-gpi-dma";
reg = <0 0x00800000 0 0x60000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 0>,
- <&rpmhpd 12>;
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MSS>;
power-domain-names = "cx", "mss";
interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
- interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
};
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8350-aoss-qmp";
+ compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
timer@17c20000 {
compatible = "arm,armv7-timer-mem";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
<0 0x01d87800 0 0x108>,
<0 0x01d87a00 0 0x1e0>;
#phy-cells = <0>;
- #clock-cells = <0>;
};
};
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 4>,
- <&rpmhpd 5>;
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&pil_slpi_mem>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 0>,
- <&rpmhpd 10>;
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MXC>;
power-domain-names = "cx", "mxc";
interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
<0 0x088ec000 0 0x200>,
<0 0x088eb200 0 0x1100>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_uni_phy_pipe_clk_src";
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
};
};
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domain-names = "mmcx";
+ };
+
adsp: remoteproc@17300000 {
compatible = "qcom,sm8350-adsp-pas";
reg = <0 0x17300000 0 0x100>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 4>,
- <&rpmhpd 5>;
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&pil_adsp_mem>;
vdda-phy-supply = <&vreg_l5b_0p88>;
vdda-pll-supply = <&vreg_l6b_1p2>;
- vdda-max-microamp = <173000>;
- vdda-pll-max-microamp = <24900>;
};
&usb_1 {
vdda-phy-supply = <&vreg_l5b_0p88>;
vdda-pll-supply = <&vreg_l6b_1p2>;
- vdda-max-microamp = <173000>;
- vdda-pll-max-microamp = <24900>;
};
&usb_1 {
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-camcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
firmware {
scm: scm {
compatible = "qcom,scm-sm8450", "qcom,scm";
+ interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
#reset-cells = <1>;
};
};
- clk_virt: interconnect@0 {
+ clk_virt: interconnect-0 {
compatible = "qcom,sm8450-clk-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
- mc_virt: interconnect@1 {
+ mc_virt: interconnect-1 {
compatible = "qcom,sm8450-mc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
};
- qup_opp_table_100mhz: qup-100mhz-opp-table {
+ qup_opp_table_100mhz: opp-table-qup {
compatible = "operating-points-v2";
opp-50000000 {
status = "disabled";
};
+ uart20: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart20_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi20: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
compatible = "qcom,sm8450-slpi-pas";
reg = <0 0x02400000 0 0x4000>;
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
compatible = "qcom,sm8450-adsp-pas";
reg = <0 0x030000000 0 0x100>;
- interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
compatible = "qcom,sm8450-cdsp-pas";
reg = <0 0x032300000 0 0x1400000>;
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
compatible = "qcom,sm8450-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
- interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
- interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
};
};
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sm8450-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ status = "disabled";
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8450-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
drive-strength = <2>;
bias-disable;
};
+
+ qup_uart20_default: qup-uart20-default {
+ pins = "gpio76", "gpio77", "gpio78", "gpio79";
+ function = "qup20";
+ };
+
};
apps_smmu: iommu@15000000 {
timer@17420000 {
compatible = "arm,armv7-timer-mem";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
reg = <0x0 0x17420000 0x0 0x1000>;
clock-frequency = <19200000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17421000 0x0 0x1000>,
- <0x0 0x17422000 0x0 0x1000>;
+ reg = <0x17421000 0x1000>,
+ <0x17422000 0x1000>;
};
frame@17423000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17423000 0x0 0x1000>;
+ reg = <0x17423000 0x1000>;
status = "disabled";
};
frame@17425000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17425000 0x0 0x1000>;
+ reg = <0x17425000 0x1000>;
status = "disabled";
};
frame@17427000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17427000 0x0 0x1000>;
+ reg = <0x17427000 0x1000>;
status = "disabled";
};
frame@17429000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17429000 0x0 0x1000>;
+ reg = <0x17429000 0x1000>;
status = "disabled";
};
frame@1742b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742b000 0x0 0x1000>;
+ reg = <0x1742b000 0x1000>;
status = "disabled";
};
frame@1742d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742d000 0x0 0x1000>;
+ reg = <0x1742d000 0x1000>;
status = "disabled";
};
};
<0 0x01d87800 0 0x108>,
<0 0x01d87a00 0 0x1e0>;
#phy-cells = <0>;
- #clock-cells = <0>;
};
};
dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
+
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
};
};
- reg_audio: regulator_audio {
+ reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
vin-supply = <®_lcd>;
};
- reg_cam0: regulator_camera {
+ reg_cam0: regulator-cam0 {
compatible = "regulator-fixed";
regulator-name = "reg_cam0";
regulator-min-microvolt = <1800000>;
enable-active-high;
};
- reg_cam1: regulator_camera {
+ reg_cam1: regulator-cam1 {
compatible = "regulator-fixed";
regulator-name = "reg_cam1";
regulator-min-microvolt = <1800000>;
clock-output-names = "osc_32k";
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS1 on a Draak or
+ * Ebisu board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+};
+
+&lvds1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
bitclock-master = <&rsnd_for_ak4613>;
frame-master = <&rsnd_for_ak4613>;
playback = <&ssi3>, <&src5>, <&dvc0>;
- capture = <&ssi4>, <&src6>, <&dvc1>;
+ capture = <&ssi4>, <&src6>, <&dvc1>;
};
};
};
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-always-on;
};
- reg_12p0v: regulator2 {
+ reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
rcar_sound,dai {
dai0 {
playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ */
+
+panel {
+ compatible = "mitsubishi,aa104xd12", "panel-lvds";
+
+ width-mm = <210>;
+ height-mm = <158>;
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ /* 1024x768 @65Hz */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hsync-len = <136>;
+ hfront-porch = <20>;
+ hback-porch = <160>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ };
+
+ port {
+ };
+};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
- thermal-sensors = <&thermal 0>;
+ thermal-sensors = <&thermal>;
sustainable-power = <717>;
cooling-maps {
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
- thermal-sensors = <&thermal 0>;
+ thermal-sensors = <&thermal>;
sustainable-power = <717>;
cooling-maps {
device_type = "cpu";
power-domains = <&sysc R8A779A0_PD_A1E0D0C0>;
next-level-cache = <&L3_CA76_0>;
+ clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>;
};
L3_CA76_0: cache-controller-0 {
};
gpio0: gpio@e6058180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6058180 0 0x54>;
interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
};
gpio1: gpio@e6050180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6050180 0 0x54>;
interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
};
gpio2: gpio@e6050980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6050980 0 0x54>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
};
gpio3: gpio@e6058980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6058980 0 0x54>;
interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
};
gpio4: gpio@e6060180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6060180 0 0x54>;
interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
};
gpio5: gpio@e6060980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6060980 0 0x54>;
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
};
gpio6: gpio@e6068180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6068180 0 0x54>;
interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
};
gpio7: gpio@e6068980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6068980 0 0x54>;
interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
};
gpio8: gpio@e6069180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6069180 0 0x54>;
interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
};
gpio9: gpio@e6069980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6069980 0 0x54>;
interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
function = "i2c4";
};
+ scif0_pins: scif0 {
+ groups = "scif0_data", "scif0_ctrl";
+ function = "scif0";
+ };
+
scif3_pins: scif3 {
groups = "scif3_data", "scif3_ctrl";
function = "scif3";
status = "okay";
};
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
&scif3 {
pinctrl-0 = <&scif3_pins>;
pinctrl-names = "default";
aliases {
serial0 = &scif3;
+ serial1 = &scif0;
};
chosen {
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&a55_0>;
+ };
+ core1 {
+ cpu = <&a55_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&a55_2>;
+ };
+ core1 {
+ cpu = <&a55_3>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&a55_4>;
+ };
+ core1 {
+ cpu = <&a55_5>;
+ };
+ };
+
+ cluster3 {
+ core0 {
+ cpu = <&a55_6>;
+ };
+ core1 {
+ cpu = <&a55_7>;
+ };
+ };
+ };
+
a55_0: cpu@0 {
compatible = "arm,cortex-a55";
reg = <0>;
device_type = "cpu";
power-domains = <&sysc R8A779F0_PD_A1E0D0C0>;
+ next-level-cache = <&L3_CA55_0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+ };
+
+ a55_1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E0D0C1>;
+ next-level-cache = <&L3_CA55_0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+ };
+
+ a55_2: cpu@10000 {
+ compatible = "arm,cortex-a55";
+ reg = <0x10000>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E0D1C0>;
+ next-level-cache = <&L3_CA55_1>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+ };
+
+ a55_3: cpu@10100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x10100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E0D1C1>;
+ next-level-cache = <&L3_CA55_1>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+ };
+
+ a55_4: cpu@20000 {
+ compatible = "arm,cortex-a55";
+ reg = <0x20000>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E1D0C0>;
+ next-level-cache = <&L3_CA55_2>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+ };
+
+ a55_5: cpu@20100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x20100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E1D0C1>;
+ next-level-cache = <&L3_CA55_2>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+ };
+
+ a55_6: cpu@30000 {
+ compatible = "arm,cortex-a55";
+ reg = <0x30000>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E1D1C0>;
+ next-level-cache = <&L3_CA55_3>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+ };
+
+ a55_7: cpu@30100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x30100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779F0_PD_A1E1D1C1>;
+ next-level-cache = <&L3_CA55_3>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+ };
+
+ L3_CA55_0: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc R8A779F0_PD_A2E0D0>;
+ cache-unified;
+ cache-level = <3>;
+ };
+
+ L3_CA55_1: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc R8A779F0_PD_A2E0D1>;
+ cache-unified;
+ cache-level = <3>;
+ };
+
+ L3_CA55_2: cache-controller-2 {
+ compatible = "cache";
+ power-domains = <&sysc R8A779F0_PD_A2E1D0>;
+ cache-unified;
+ cache-level = <3>;
+ };
+
+ L3_CA55_3: cache-controller-3 {
+ compatible = "cache";
+ power-domains = <&sysc R8A779F0_PD_A2E1D1>;
+ cache-unified;
+ cache-level = <3>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <4000>;
+ };
};
};
interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a779f0-thermal";
+ /* The 4th sensor is in control domain and not for Linux */
+ reg = <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779f0",
"renesas,rcar-gen4-i2c";
status = "disabled";
};
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+ <&dmac1 0x31>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+ <&dmac1 0x33>, <&dmac1 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+ <&dmac1 0x35>, <&dmac1 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+ <&dmac1 0x37>, <&dmac1 0x36>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ ufs: ufs@e6860000 {
+ compatible = "renesas,r8a779f0-ufs";
+ reg = <0 0xe6860000 0 0x100>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+ clock-names = "fck", "ref_clk";
+ freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 1514>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a779f0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+ <&dmac1 0x51>, <&dmac1 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a779f0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+ <&dmac1 0x53>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779f0",
"renesas,rcar-gen4-scif", "renesas,scif";
<&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+ <&dmac1 0x57>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 704>;
status = "disabled";
};
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a779f0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+ <&dmac1 0x59>, <&dmac1 0x58>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e7350000 {
compatible = "renesas,dmac-r8a779f0",
"renesas,rcar-gen4-dmac";
resets = <&cpg 709>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7351000 {
resets = <&cpg 710>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+ <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+ <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+ <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+ <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+ <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+ <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+ <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+ };
+
+ ipmmu_rt0: iommu@ee480000 {
+ compatible = "renesas,ipmmu-r8a779f0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee480000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 10>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt1: iommu@ee4c0000 {
+ compatible = "renesas,ipmmu-r8a779f0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee4c0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 19>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds0: iommu@eed00000 {
+ compatible = "renesas,ipmmu-r8a779f0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_hc: iommu@eed40000 {
+ compatible = "renesas,ipmmu-r8a779f0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed40000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 2>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: iommu@eefc0000 {
+ compatible = "renesas,ipmmu-r8a779f0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeefc0000 0 0x20000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
};
gic: interrupt-controller@f1000000 {
reg = <0x0 0xf1000000 0 0x20000>,
<0x0 0xf1060000 0 0x110000>;
interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
prr: chipid@fff00044 {
};
};
+ thermal-zones {
+ sensor_thermal1: sensor1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ ufs30_clk: ufs30-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
};
};
/ {
compatible = "renesas,r8a779m8", "renesas,r8a7795";
};
+
+&cluster0_opp {
+ /delete-node/ opp-1600000000;
+ /delete-node/ opp-1700000000;
+};
};
adc: adc@10059000 {
+ compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
reg = <0 0x10059000 0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
+ <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
+ clock-names = "adclk", "pclk";
+ resets = <&cpg R9A07G043_ADC_PRESETN>,
+ <&cpg R9A07G043_ADC_ADRST_N>;
+ reset-names = "presetn", "adrst-n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ };
+ channel@1 {
+ reg = <1>;
+ };
};
tsu: thermal@10059400 {
model = "Renesas SMARC EVK based on r9a07g043u11";
compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043";
};
-
-&spi1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
- * Device Tree Source for the RZ/G2L SMARC EVK board
+ * Device Tree Source for the RZ/V2L SMARC EVK board
*
* Copyright (C) 2021 Renesas Electronics Corp.
*/
aliases {
serial0 = &uart0;
+ ethernet0 = &avb;
};
chosen {
};
};
+&avb {
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
&extal_clk {
clock-frequency = <48000000>;
};
clock-names = "clk";
};
+ avb: ethernet@a3300000 {
+ compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+ reg = <0 0xa3300000 0 0x800>;
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* ch18: Tx0 BE */
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* ch19: Tx1 NC */
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* DiA */
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* DiB */
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, /* Line1_A */
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, /* Line1_B */
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, /* Line2_A */
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* Line2_B */
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; /* Line3 MAC */
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "dia", "dib",
+ "err_a", "err_b", "mgmt_a", "mgmt_b",
+ "line3";
+ clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>,
+ <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>;
+ clock-names = "axi", "chi", "gptp";
+ resets = <&cpg R9A09G011_ETH0_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
cpg: clock-controller@a3500000 {
compatible = "renesas,r9a09g011-cpg";
reg = <0 0xa3500000 0 0x1000>;
reg = <0x0 0x48000000 0x0 0x78000000>;
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
#define SW_RSPI_CAN 1
#endif
-#if (SW_SCIF_CAN & SW_RSPI_CAN)
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
#endif
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
#endif
};
+#if (SW_SW0_DEV_SEL)
+&adc {
+ pinctrl-0 = <&adc_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+#endif
+
#if (!SW_ET0_EN_N)
ð0 {
pinctrl-0 = <ð0_pins>;
};
&pinctrl {
+ adc_pins: adc {
+ pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */
+ };
+
eth0_pins: eth0 {
pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
<RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
};
};
+
+ spi1_pins: rspi1 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
+ <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
+ <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
+ <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
+ };
};
#if (SW_SW0_DEV_SEL)
status = "disabled";
};
+&spi1 {
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ status = "disabled";
+};
+
&ssi1 {
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-always-on;
};
- reg_12v: regulator2 {
+ reg_12v: regulator-12v {
compatible = "regulator-fixed";
regulator-name = "fixed-12V";
regulator-min-microvolt = <12000000>;
frame-master = <&rsnd_endpoint0>;
playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a
+ * Salvator-X or Salvator-XS board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
clocks = <&clksndsel>;
clock-names = "scki";
- VDD1-supply = <&snd_3p3v>;
- VDD2-supply = <&snd_3p3v>;
- VCCAD1-supply = <&snd_vcc5v>;
- VCCAD2-supply = <&snd_vcc5v>;
- VCCDA1-supply = <&snd_vcc5v>;
- VCCDA2-supply = <&snd_vcc5v>;
+ VDD1-supply = <&snd_3p3v>;
+ VDD2-supply = <&snd_3p3v>;
+ VCCAD1-supply = <&snd_vcc5v>;
+ VCCAD2-supply = <&snd_vcc5v>;
+ VCCDA1-supply = <&snd_vcc5v>;
+ VCCDA2-supply = <&snd_vcc5v>;
ports {
#address-cells = <1>;
bitclock-master;
frame-master;
dai-tdm-slot-num = <6>;
- capture = <&ssi4>;
+ capture = <&ssi4>;
};
};
};
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
bitclock-master;
frame-master;
playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
rsnd_port1: port@1 {
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
i2c0: i2c@ff180000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff180000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
+ * Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi S";
+ compatible = "radxa,rockpis", "rockchip,rk3308";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+
+ green-led {
+ default-state = "on";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ label = "rockpis:green:power";
+ linux,default-trigger = "default-on";
+ };
+
+ blue-led {
+ default-state = "on";
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ label = "rockpis:blue:user";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_1v8: vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_io: vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_core: vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-init-microvolt = <1015000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_io>;
+ snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
+ leds {
+ green_led_gio: green-led-gpio {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ heartbeat_led_gpio: heartbeat-led-gpio {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake: wifi-host-wake {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+ pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <1000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
* |------------------------------------------------|
*/
- sw1 {
+ button-sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
- sw2 {
+ button-sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
- sw3 {
+ button-sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
- sw4 {
+ button-sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
- sw5 {
+ button-sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
- sw6 {
+ button-sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
- sw7 {
+ button-sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
- sw8 {
+ button-sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
- sw9 {
+ button-sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
- sw10 {
+ button-sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
- sw11 {
+ button-sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
- sw12 {
+ button-sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
- sw13 {
+ button-sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
- sw14 {
+ button-sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
- sw15 {
+ button-sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
- sw16 {
+ button-sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
vccio_sd: vcc-io-sd-regulator {
compatible = "regulator-fixed";
- regulator-name= "vccio_sd";
+ regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
gmac {
rgmii_pins: rgmii-pins {
- rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
<3 RK_PD0 1 &pcfg_pull_none>,
<3 RK_PC3 1 &pcfg_pull_none>,
<3 RK_PB0 1 &pcfg_pull_none_12ma>,
};
rmii_pins: rmii-pins {
- rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
<3 RK_PD0 1 &pcfg_pull_none>,
<3 RK_PC3 1 &pcfg_pull_none>,
<3 RK_PB0 1 &pcfg_pull_none_12ma>,
spdif {
spdif_tx: spdif-tx {
- rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
};
};
};
edp_panel: edp-panel {
- compatible ="lg,lp079qx1-sp0v";
+ compatible = "lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
power-supply = <&vcc3v3_s0>;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
- wake_on_bt: wake-on-bt {
+ wake_on_bt: key-wake-on-bt {
label = "Wake-on-Bluetooth";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
- /delete-node/ power;
+ /delete-node/ key-power;
- reset {
+ key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
- lid {
+ switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
- power {
+ key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
sgtl5000_clk: sgtl5000-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <24576000>;
+ clock-frequency = <24576000>;
};
dc_12v: dc-12v {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
stdout-path = "serial2:1500000n8";
};
+ /* enable for panel backlight support */
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ pwms = <&pwm0 0 1000000 0>;
+ status = "disabled";
+ };
+
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
};
};
+ avdd: avdd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd";
+ regulator-min-microvolt = <11000000>;
+ regulator-max-microvolt = <11000000>;
+ vin-supply = <&vcc3v3_s0>;
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
vcc3v0_touch: LDO_REG2 {
regulator-name = "vcc3v0_touch";
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
vbus-supply = <&vcc5v0_typec>;
status = "okay";
};
+
+ /* enable for pine64 touch screen support */
+ touch: touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+ AVDD28-supply = <&vcc3v0_touch>;
+ VDDIO-supply = <&vcc3v0_touch>;
+ irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
};
&i2s0 {
gpio1830-supply = <&vcc_3v0>;
};
+/* enable for pine64 panel display support */
+&mipi_dsi {
+ clock-master;
+ status = "disabled";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ mipi_panel: panel@0 {
+ compatible = "feiyang,fy07024di26a30d";
+ reg = <0>;
+ avdd-supply = <&avdd>;
+ backlight = <&backlight>;
+ dvdd-supply = <&vcc3v3_s0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+};
+
&pcie0 {
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
};
edp_panel: edp-panel {
- compatible ="lg,lp079qx1-sp0v";
+ compatible = "lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
pcie {
pcie_pwr: pcie-pwr {
- rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pinctrl-0 = <&hall_int_l>;
pinctrl-names = "default";
- cover {
+ switch-cover {
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
4500 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fan_en_h>;
#cooling-cells = <2>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
vin-supply = <&vcc12v_dcin>;
};
+ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_enable_h>;
+ regulator-name = "vcc3v3_pcie_p";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
vcc5v0_usb: vcc5v0_usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
status = "okay";
};
+&combphy2 {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
status = "okay";
};
+&hdmi {
+ avdd-0v9-supply = <&vdda_0v9>;
+ avdd-1v8-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
status = "okay";
};
+&i2s0_8ch {
+ status = "okay";
+};
+
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
};
};
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_h>;
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie_p>;
+ status = "okay";
+};
+
&pinctrl {
bt {
bt_enable_h: bt-enable-h {
};
};
+ fan {
+ fan_en_h: fan-en-h {
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
work_led_enable_h: work-led-enable-h {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ pcie {
+ pcie_enable_h: pcie-enable-h {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
status = "okay";
};
+&sfc {
+ pinctrl-0 = <&fspi_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
/* spdif is exposed on con40 pin 18 */
&spdif {
status = "okay";
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
extcon = <&usb2phy0>;
maximum-speed = "high-speed";
};
+
+&vop {
+ compatible = "rockchip,rk3566-vop";
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
regulator-max-microvolt = <12000000>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
+ regulator-always-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
+ regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
+ regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
+&i2c3 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtcic_32kout";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
&i2c5 {
/* pin 3 (SDA) + 4 (SCL) of header con2 */
status = "disabled";
};
+&i2s0_8ch {
+ /* hdmi sound */
+ status = "okay";
+};
+
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
};
};
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int: pmic_int {
rockchip,pins =
};
&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
regulator-max-microvolt = <12000000>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
status = "okay";
};
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
};
+&i2s0_8ch {
+ status = "okay";
+};
+
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
stdout-path = "serial2:1500000n8";
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
status = "okay";
};
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
};
+&i2s0_8ch {
+ status = "okay";
+};
+
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
phy-names = "usb2-phy", "usb3-phy";
};
+
+&vop {
+ compatible = "rockchip,rk3568-vop";
+};
};
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
firmware {
scmi: scmi {
compatible = "arm,scmi-smc";
};
};
+ hdmi_sound: hdmi-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "HDMI";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ status = "disabled";
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
};
};
+ vop: vop@fe040000 {
+ reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+ reg-names = "vop", "gamma-lut";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+ clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3568_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp2: port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fe043e00 {
+ compatible = "rockchip,rk3568-iommu";
+ reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ hdmi: hdmi@fe0a0000 {
+ compatible = "rockchip,rk3568-dw-hdmi";
+ reg = <0x0 0xfe0a0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_HOST>,
+ <&cru CLK_HDMI_SFR>,
+ <&cru CLK_HDMI_CEC>,
+ <&pmucru CLK_HDMI_REF>,
+ <&cru HCLK_VO>;
+ clock-names = "iahb", "isfr", "cec", "ref";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+ power-domains = <&power RK3568_PD_VO>;
+ reg-io-width = <4>;
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
qos_gpu: qos@fe128000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe128000 0x0 0x20>;
reg = <0x0 0xfe1a8100 0x0 0x20>;
};
+ pcie2x1: pcie@fe260000 {
+ compatible = "rockchip,rk3568-pcie";
+ reg = <0x3 0xc0000000 0x0 0x00400000>,
+ <0x0 0xfe260000 0x0 0x00010000>,
+ <0x3 0x3f000000 0x0 0x01000000>;
+ reg-names = "dbi", "apb", "config";
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+ bus-range = <0x0 0xf>;
+ clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+ <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+ <&cru CLK_PCIE20_AUX_NDFT>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk", "aux";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ linux,pci-domain = <0>;
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ max-link-speed = <2>;
+ msi-map = <0x0 &gic 0x0 0x1000>;
+ num-lanes = <1>;
+ phys = <&combphy2 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3568_PD_PIPE>;
+ ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
+ 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+ resets = <&cru SRST_PCIE20_POWERUP>;
+ reset-names = "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ pcie_intc: legacy-interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
sdmmc0: mmc@fe2b0000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2b0000 0x0 0x4000>;
status = "disabled";
};
+ i2s0_8ch: i2s@fe400000 {
+ compatible = "rockchip,rk3568-i2s-tdm";
+ reg = <0x0 0xfe400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+ assigned-clock-rates = <1188000000>, <1188000000>;
+ clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac1 0>;
+ dma-names = "tx";
+ resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
i2s1_8ch: i2s@fe410000 {
compatible = "rockchip,rk3568-i2s-tdm";
reg = <0x0 0xfe410000 0x0 0x1000>;
};
psci {
- compatible = "arm,psci";
- method = "smc";
- cpu_on = <0xc4000003>;
- cpu_off = <0x84000002>;
- cpu_suspend = <0xc4000001>;
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_on = <0xc4000003>;
+ cpu_off = <0x84000002>;
+ cpu_suspend = <0xc4000001>;
};
timer {
ranges;
sdio0: sdio@20300000 {
- compatible = "sprd,sdhci-r11";
+ compatible = "sprd,sdhci-r11";
reg = <0 0x20300000 0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
sdio3: sdio@20600000 {
- compatible = "sprd,sdhci-r11";
+ compatible = "sprd,sdhci-r11";
reg = <0 0x20600000 0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
};
sdio3: sdio@50430000 {
- compatible = "sprd,sdhci-r11";
+ compatible = "sprd,sdhci-r11";
reg = <0 0x50430000 0 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
&serial_0 {
status = "okay";
};
+
+&ufs {
+ status = "okay";
+};
* https://www.tesla.com
*/
-#include <dt-bindings/pinctrl/samsung.h>
+#include "fsd-pinctrl.h"
&pinctrl_fsys0 {
gpf0: gpf0-gpio-bank {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ ufs_rst_n: ufs-rst-n-pins {
+ samsung,pins = "gpf5-0";
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out-pins {
+ samsung,pins = "gpf5-1";
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+ };
};
&pinctrl_peric {
pwm0_out: pwm0-out-pins {
samsung,pins = "gpb6-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV2>;
};
pwm1_out: pwm1-out-pins {
samsung,pins = "gpb6-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV2>;
};
hs_i2c0_bus: hs-i2c0-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus-pins {
samsung,pins = "gpb0-2", "gpb0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c2_bus: hs-i2c2-bus-pins {
samsung,pins = "gpb0-4", "gpb0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c3_bus: hs-i2c3-bus-pins {
samsung,pins = "gpb0-6", "gpb0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c4_bus: hs-i2c4-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c5_bus: hs-i2c5-bus-pins {
samsung,pins = "gpb1-2", "gpb1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c6_bus: hs-i2c6-bus-pins {
samsung,pins = "gpb1-4", "gpb1-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
hs_i2c7_bus: hs-i2c7-bus-pins {
samsung,pins = "gpb1-6", "gpb1-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
uart0_data: uart0-data-pins {
samsung,pins = "gpb7-0", "gpb7-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
uart1_data: uart1-data-pins {
samsung,pins = "gpb7-4", "gpb7-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus-pins {
samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus-pins {
samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus-pins {
samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-function = <FSD_PIN_FUNC_2>;
+ samsung,pin-pud = <FSD_PIN_PULL_UP>;
+ samsung,pin-drv = <FSD_PIN_DRV_LV1>;
};
};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Tesla FSD DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+#define __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+
+#define FSD_PIN_PULL_NONE 0
+#define FSD_PIN_PULL_DOWN 1
+#define FSD_PIN_PULL_UP 3
+
+#define FSD_PIN_DRV_LV1 0
+#define FSD_PIN_DRV_LV2 2
+#define FSD_PIN_DRV_LV3 1
+#define FSD_PIN_DRV_LV4 3
+
+#define FSD_PIN_FUNC_INPUT 0
+#define FSD_PIN_FUNC_OUTPUT 1
+#define FSD_PIN_FUNC_2 2
+#define FSD_PIN_FUNC_3 3
+#define FSD_PIN_FUNC_4 4
+#define FSD_PIN_FUNC_5 5
+#define FSD_PIN_FUNC_6 6
+#define FSD_PIN_FUNC_EINT 0xf
+#define FSD_PIN_FUNC_F FSD_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_TESLA_FSD_PINCTRL_H__ */
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl0_1: cpu@1 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl0_2: cpu@2 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl0_3: cpu@3 {
reg = <0x0 0x003>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
/* Cluster 1 */
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl1_1: cpu@101 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl1_2: cpu@102 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl1_3: cpu@103 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
/* Cluster 2 */
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl2_1: cpu@201 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl2_2: cpu@202 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
};
cpucl2_3: cpu@203 {
enable-method = "psci";
clock-frequency = <2400000000>;
cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cpucl_l2>;
+ };
+
+ cpucl_l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x400000>;
+ cache-line-size = <64>;
+ cache-sets = <4096>;
};
idle-states {
clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
clock-names = "fin_pll", "mct";
};
+
+ ufs: ufs@15120000 {
+ compatible = "tesla,fsd-ufs";
+ reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */
+ <0x0 0x15121100 0x0 0x200>, /* 1: Vendor specified */
+ <0x0 0x15110000 0x0 0x8000>, /* 2: UNIPRO */
+ <0x0 0x15130000 0x0 0x100>; /* 3: UFS protector */
+ reg-names = "hci", "vs_hci", "unipro", "ufsp";
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock_fsys0 UFS0_TOP0_HCLK_BUS>,
+ <&clock_fsys0 UFS0_TOP0_CLK_UNIPRO>;
+ clock-names = "core_clk", "sclk_unipro_main";
+ freq-table-hz = <0 0>, <0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+ phys = <&ufs_phy>;
+ phy-names = "ufs-phy";
+ status = "disabled";
+ };
+
+ ufs_phy: ufs-phy@15124000 {
+ compatible = "tesla,fsd-ufs-phy";
+ reg = <0x0 0x15124000 0x0 0x800>;
+ reg-names = "phy-pma";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
+ clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
+ clock-names = "ref_clk";
+ };
};
};
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 12>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 12>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44043000 0x00 0xfe0>;
};
};
+ crypto: crypto@40900000 {
+ compatible = "ti,am62-sa3ul";
+ reg = <0x00 0x40900000 0x00 0x1200>;
+ power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+ dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+ <&main_pktdma 0x7507 0>;
+ dma-names = "tx", "rx1", "rx2";
+ };
+
main_pmx0: pinctrl@f4000 {
compatible = "pinctrl-single";
reg = <0x00 0xf4000 0x00 0x2ac>;
#include "k3-am625.dtsi"
/ {
- compatible = "ti,am625-sk", "ti,am625";
+ compatible = "ti,am625-sk", "ti,am625";
model = "Texas Instruments AM625 SK";
aliases {
#size-cells = <2>;
ranges;
+ ramoops@9ca00000 {
+ compatible = "ramoops";
+ reg = <0x00 0x9ca00000 0x00 0x00100000>;
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x00>;
+ pmsg-size = <0x8000>;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 12>,
+ mboxes = <&secure_proxy_main 12>,
<&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44043000 0x00 0xfe0>;
<0x00 0x20718000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
+ clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
clock-names = "hclk", "cclk";
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
#include "k3-am642.dtsi"
/ {
- compatible = "ti,am642-evm", "ti,am642";
+ compatible = "ti,am642-evm", "ti,am642";
model = "Texas Instruments AM642 EVM";
chosen {
#include "k3-am642.dtsi"
/ {
- compatible = "ti,am642-sk", "ti,am642";
+ compatible = "ti,am642-sk", "ti,am642";
model = "Texas Instruments AM642 SK";
chosen {
>;
};
+ main_uart0_pins_default: main-uart0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+ AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+ >;
+ };
+
main_usb0_pins_default: main-usb0-pins-default {
pinctrl-single,pins = <
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
status = "disabled";
};
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+};
+
&main_uart1 {
/* main_uart1 is reserved for firmware usage */
status = "reserved";
psu: regulator@60 {
compatible = "ti,tps62363";
- reg = <0x60>;
+ reg = <0x60>;
regulator-name = "tps62363-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
pinctrl-0 = <&mcu_spi0_pins_default>;
#address-cells = <1>;
- #size-cells= <0>;
+ #size-cells = <0>;
ti,pindir-d0-out-d1-in;
};
pcie0_rc: pcie@5500000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
pcie0_ep: pcie-ep@5500000 {
compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
ti,syscon-pcie-mode = <&pcie0_mode>;
pcie1_rc: pcie@5600000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
pcie1_ep: pcie-ep@5600000 {
compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
ti,syscon-pcie-mode = <&pcie1_mode>;
power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 67 1>,
- <&k3_clks 216 1>,
- <&k3_clks 67 2>;
+ clocks = <&k3_clks 67 1>,
+ <&k3_clks 216 1>,
+ <&k3_clks 67 2>;
clock-names = "fck", "vp1", "vp2";
/*
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x44083000 0x1000>;
#include <dt-bindings/net/ti-dp83867.h>
/ {
- compatible = "ti,am654-evm", "ti,am654";
+ compatible = "ti,am654-evm", "ti,am654";
model = "Texas Instruments AM654 Base Board";
chosen {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins_default>;
- sw5 {
+ switch-5 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
};
- sw6 {
+ switch-6 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&main_spi0_pins_default>;
#address-cells = <1>;
- #size-cells= <0>;
+ #size-cells = <0>;
ti,pindir-d0-out-d1-in;
flash@0 {
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x00 0x1000>;
pinctrl-names = "default";
pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
- sw10: sw10 {
+ sw10: switch-10 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
};
- sw11: sw11 {
+ sw11: switch-11 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x0 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 98 7>, <&k3_clks 98 1>;
- clock-names = "clk_ahb", "clk_xin";
+ clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 98 1>;
assigned-clock-parents = <&k3_clks 98 2>;
bus-width = <8>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 99 8>, <&k3_clks 99 1>;
- clock-names = "clk_ahb", "clk_xin";
+ clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 99 1>;
assigned-clock-parents = <&k3_clks 99 2>;
bus-width = <4>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x00 0x1000>;
clocks = <&zynqmp_clk LPD_WDT>;
};
+&xilinx_ams {
+ clocks = <&zynqmp_clk AMS_REF>;
+};
+
&zynqmp_dpdma {
clocks = <&zynqmp_clk DPDMA_REF>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- fwuen {
+ key-fwuen {
label = "fwuen";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
"", "", "", "", "", /* 155 - 159 */
"", "", "", "", "", /* 160 - 164 */
"", "", "", "", "", /* 165 - 169 */
- "", "", "", ""; /* 170 - 174 */
+ "", "", "", ""; /* 170 - 173 */
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw4 {
+ switch-4 {
label = "sw4";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
timeout-sec = <10>;
};
+ xilinx_ams: ams@ffa50000 {
+ compatible = "xlnx,zynqmp-ams";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 56 4>;
+ reg = <0x0 0xffa50000 0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #io-channel-cells = <1>;
+ ranges = <0 0 0xffa50800 0x800>;
+
+ ams_ps: ams_ps@0 {
+ compatible = "xlnx,zynqmp-ams-ps";
+ status = "disabled";
+ reg = <0x0 0x400>;
+ };
+
+ ams_pl: ams_pl@400 {
+ compatible = "xlnx,zynqmp-ams-pl";
+ status = "disabled";
+ reg = <0x400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
zynqmp_dpdma: dma-controller@fd4c0000 {
compatible = "xlnx,zynqmp-dpdma";
status = "disabled";
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_APPLE=y
CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM4908=y
+CONFIG_ARCH_BCMBCA=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_MXC=y
+CONFIG_ARCH_NPCM=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_IMX_CPUFREQ_DT=m
+CONFIG_ARM_MEDIATEK_CPUFREQ=y
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_CPUFREQ_HW=y
CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=y
CONFIG_ARM_TEGRA186_CPUFREQ=y
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
CONFIG_ACPI=y
CONFIG_ACPI_APEI=y
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
CONFIG_JUMP_LABEL=y
-CONFIG_SECCOMP=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_KSM=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_GATE=m
-CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_CAN=m
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=m
-CONFIG_SCSI_UFSHCD=y
-CONFIG_SCSI_UFSHCD_PLATFORM=y
-CONFIG_SCSI_UFS_QCOM=m
-CONFIG_SCSI_UFS_HISI=y
-CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NET_XGENE=y
CONFIG_ATL1C=m
CONFIG_BCMGENET=m
-CONFIG_SYSTEMPORT=m
CONFIG_BNX2X=m
+CONFIG_SYSTEMPORT=m
CONFIG_MACB=y
CONFIG_THUNDER_NIC_PF=y
CONFIG_FEC=y
CONFIG_VITESSE_PHY=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_USB_BRCMSTB=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
-CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_BCM2835=m
+CONFIG_I2C_CADENCE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_GPIO=m
CONFIG_I2C_IMX=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
-CONFIG_I2C_CADENCE=m
CONFIG_SPI=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_BCM2835=m
CONFIG_PINCTRL_IMX8QXP=y
CONFIG_PINCTRL_IMX8DXL=y
CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
+CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_CHARGER_BQ25980=m
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM90=m
CONFIG_TEGRA_SOCTHERM=m
CONFIG_TEGRA_BPMP_THERMAL=m
CONFIG_QCOM_TSENS=y
+CONFIG_QCOM_SPMI_ADC_TM5=m
CONFIG_QCOM_SPMI_TEMP_ALARM=m
CONFIG_QCOM_LMH=m
-CONFIG_QCOM_SPMI_ADC_TM5=m
CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ARM_SBSA_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
-CONFIG_BCM7038_WDT=m
CONFIG_DW_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=m
CONFIG_IMX2_WDT=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=m
CONFIG_BCM2835_WDT=y
+CONFIG_BCM7038_WDT=m
+CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SDR_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_QCOM_CAMSS=m
+CONFIG_VIDEO_QCOM_VENUS=m
+CONFIG_VIDEO_RCAR_ISP=m
CONFIG_VIDEO_RCAR_CSI2=m
CONFIG_VIDEO_RCAR_VIN=m
-CONFIG_VIDEO_SUN6I_CSI=m
-CONFIG_VIDEO_RCAR_ISP=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
-CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_FCP=m
+CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_VSP1=m
-CONFIG_VIDEO_QCOM_VENUS=m
-CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SUN6I_CSI=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=m
CONFIG_DRM_IMX_DCSS=m
+CONFIG_DRM_V3D=m
CONFIG_DRM_VC4=m
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_HISI_HIBMC=m
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SUN8I_CODEC=m
+CONFIG_SND_SUN8I_CODEC_ANALOG=m
+CONFIG_SND_SUN50I_CODEC_ANALOG=m
CONFIG_SND_SUN4I_I2S=m
CONFIG_SND_SUN4I_SPDIF=m
CONFIG_SND_SOC_TEGRA=m
CONFIG_SND_SOC_TEGRA210_AHUB=m
CONFIG_SND_SOC_TEGRA210_DMIC=m
CONFIG_SND_SOC_TEGRA210_I2S=m
+CONFIG_SND_SOC_TEGRA210_OPE=m
CONFIG_SND_SOC_TEGRA186_ASRC=m
CONFIG_SND_SOC_TEGRA186_DSPK=m
CONFIG_SND_SOC_TEGRA210_ADMAIF=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_BRCMSTB=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
+CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_SCSI_UFS_QCOM=m
+CONFIG_SCSI_UFS_HISI=y
+CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_QCOM_LPG=m
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_IMX_SC=m
-CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_MT6397=m
+CONFIG_RTC_DRV_XGENE=y
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_NPCM8XX=y
CONFIG_COMMON_CLK_BD718XX=m
CONFIG_CLK_RASPBERRYPI=m
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8QXP=y
CONFIG_CLK_IMX8ULP=y
+CONFIG_CLK_IMX93=y
CONFIG_TI_SCI_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCS_GCC_404=y
CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
+CONFIG_SC_GCC_8280XP=y
CONFIG_SDM_CAMCC_845=m
CONFIG_SDM_GPUCC_845=y
CONFIG_SDM_VIDEOCC_845=y
CONFIG_SDM_DISPCC_845=y
+CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8350=y
CONFIG_SM_GCC_8450=y
CONFIG_SM_GPUCC_8150=y
CONFIG_SM_GPUCC_8250=y
-CONFIG_SM_DISPCC_8250=y
CONFIG_SM_VIDEOCC_8250=y
CONFIG_QCOM_HFPLL=y
CONFIG_CLK_GFM_LPASS_SM8250=m
CONFIG_FSL_RCPM=y
CONFIG_MTK_DEVAPC=m
CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MAILBOX=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_CPR=y
CONFIG_QCOM_STATS=m
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_QCOM_APR=m
+CONFIG_QCOM_ICC_BWMON=m
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77950=y
CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A779A0=y
+CONFIG_ARCH_R8A779G0=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
CONFIG_ARCH_R8A774A1=y
CONFIG_PHY_QCOM_PCIE2=m
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
+CONFIG_PHY_QCOM_USB_HS=m
+CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
+CONFIG_PHY_QCOM_USB_HS_28NM=m
+CONFIG_PHY_QCOM_USB_SS=m
CONFIG_PHY_RCAR_GEN3_PCIE=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_INTERCONNECT_IMX8MQ=m
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_MSM8916=m
+CONFIG_INTERCONNECT_QCOM_MSM8996=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
+CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SC7180=m
CONFIG_INTERCONNECT_QCOM_SC7280=y
+CONFIG_INTERCONNECT_QCOM_SC8280XP=y
CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_CRYPTO_DEV_HISI_TRNG=m
CONFIG_CMA_SIZE_MBYTES=32
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
#ifndef __ASM_ASM_EXTABLE_H
#define __ASM_ASM_EXTABLE_H
+#include <linux/bits.h>
+#include <asm/gpr-num.h>
+
#define EX_TYPE_NONE 0
-#define EX_TYPE_FIXUP 1
-#define EX_TYPE_BPF 2
-#define EX_TYPE_UACCESS_ERR_ZERO 3
+#define EX_TYPE_BPF 1
+#define EX_TYPE_UACCESS_ERR_ZERO 2
+#define EX_TYPE_KACCESS_ERR_ZERO 3
#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD 4
+/* Data fields for EX_TYPE_UACCESS_ERR_ZERO */
+#define EX_DATA_REG_ERR_SHIFT 0
+#define EX_DATA_REG_ERR GENMASK(4, 0)
+#define EX_DATA_REG_ZERO_SHIFT 5
+#define EX_DATA_REG_ZERO GENMASK(9, 5)
+
+/* Data fields for EX_TYPE_LOAD_UNALIGNED_ZEROPAD */
+#define EX_DATA_REG_DATA_SHIFT 0
+#define EX_DATA_REG_DATA GENMASK(4, 0)
+#define EX_DATA_REG_ADDR_SHIFT 5
+#define EX_DATA_REG_ADDR GENMASK(9, 5)
+
#ifdef __ASSEMBLY__
#define __ASM_EXTABLE_RAW(insn, fixup, type, data) \
.short (data); \
.popsection;
+#define EX_DATA_REG(reg, gpr) \
+ (.L__gpr_num_##gpr << EX_DATA_REG_##reg##_SHIFT)
+
+#define _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero) \
+ __ASM_EXTABLE_RAW(insn, fixup, \
+ EX_TYPE_UACCESS_ERR_ZERO, \
+ ( \
+ EX_DATA_REG(ERR, err) | \
+ EX_DATA_REG(ZERO, zero) \
+ ))
+
+#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err) \
+ _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, wzr)
+
+#define _ASM_EXTABLE_UACCESS(insn, fixup) \
+ _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, wzr, wzr)
+
/*
- * Create an exception table entry for `insn`, which will branch to `fixup`
+ * Create an exception table entry for uaccess `insn`, which will branch to `fixup`
* when an unhandled fault is taken.
*/
- .macro _asm_extable, insn, fixup
- __ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
+ .macro _asm_extable_uaccess, insn, fixup
+ _ASM_EXTABLE_UACCESS(\insn, \fixup)
.endm
/*
* Create an exception table entry for `insn` if `fixup` is provided. Otherwise
* do nothing.
*/
- .macro _cond_extable, insn, fixup
- .ifnc \fixup,
- _asm_extable \insn, \fixup
+ .macro _cond_uaccess_extable, insn, fixup
+ .ifnc \fixup,
+ _asm_extable_uaccess \insn, \fixup
.endif
.endm
#else /* __ASSEMBLY__ */
-#include <linux/bits.h>
#include <linux/stringify.h>
-#include <asm/gpr-num.h>
-
#define __ASM_EXTABLE_RAW(insn, fixup, type, data) \
".pushsection __ex_table, \"a\"\n" \
".align 2\n" \
".short (" data ")\n" \
".popsection\n"
-#define _ASM_EXTABLE(insn, fixup) \
- __ASM_EXTABLE_RAW(#insn, #fixup, __stringify(EX_TYPE_FIXUP), "0")
-
-#define EX_DATA_REG_ERR_SHIFT 0
-#define EX_DATA_REG_ERR GENMASK(4, 0)
-#define EX_DATA_REG_ZERO_SHIFT 5
-#define EX_DATA_REG_ZERO GENMASK(9, 5)
-
#define EX_DATA_REG(reg, gpr) \
"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
EX_DATA_REG(ZERO, zero) \
")")
+#define _ASM_EXTABLE_KACCESS_ERR_ZERO(insn, fixup, err, zero) \
+ __DEFINE_ASM_GPR_NUMS \
+ __ASM_EXTABLE_RAW(#insn, #fixup, \
+ __stringify(EX_TYPE_KACCESS_ERR_ZERO), \
+ "(" \
+ EX_DATA_REG(ERR, err) " | " \
+ EX_DATA_REG(ZERO, zero) \
+ ")")
+
#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err) \
_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, wzr)
-#define EX_DATA_REG_DATA_SHIFT 0
-#define EX_DATA_REG_DATA GENMASK(4, 0)
-#define EX_DATA_REG_ADDR_SHIFT 5
-#define EX_DATA_REG_ADDR GENMASK(9, 5)
+#define _ASM_EXTABLE_UACCESS(insn, fixup) \
+ _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, wzr, wzr)
+
+#define _ASM_EXTABLE_KACCESS_ERR(insn, fixup, err) \
+ _ASM_EXTABLE_KACCESS_ERR_ZERO(insn, fixup, err, wzr)
#define _ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(insn, fixup, data, addr) \
__DEFINE_ASM_GPR_NUMS \
#define USER(l, x...) \
9999: x; \
- _asm_extable 9999b, l
+ _asm_extable_uaccess 9999b, l
/*
* Generate the assembly for LDTR/STTR with exception table entries.
8889: ldtr \reg2, [\addr, #8];
add \addr, \addr, \post_inc;
- _asm_extable 8888b,\l;
- _asm_extable 8889b,\l;
+ _asm_extable_uaccess 8888b, \l;
+ _asm_extable_uaccess 8889b, \l;
.endm
.macro user_stp l, reg1, reg2, addr, post_inc
8889: sttr \reg2, [\addr, #8];
add \addr, \addr, \post_inc;
- _asm_extable 8888b,\l;
- _asm_extable 8889b,\l;
+ _asm_extable_uaccess 8888b,\l;
+ _asm_extable_uaccess 8889b,\l;
.endm
.macro user_ldst l, inst, reg, addr, post_inc
8888: \inst \reg, [\addr];
add \addr, \addr, \post_inc;
- _asm_extable 8888b,\l;
+ _asm_extable_uaccess 8888b, \l;
.endm
#endif
.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
mrs \tmp1, id_aa64isar1_el1
- ubfx \tmp1, \tmp1, #ID_AA64ISAR1_APA_SHIFT, #8
+ ubfx \tmp1, \tmp1, #ID_AA64ISAR1_EL1_APA_SHIFT, #8
mrs_s \tmp2, SYS_ID_AA64ISAR2_EL1
- ubfx \tmp2, \tmp2, #ID_AA64ISAR2_APA3_SHIFT, #4
+ ubfx \tmp2, \tmp2, #ID_AA64ISAR2_EL1_APA3_SHIFT, #4
orr \tmp1, \tmp1, \tmp2
cbz \tmp1, .Lno_addr_auth\@
mov_q \tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH
.endm
+/*
+ * idmap_get_t0sz - get the T0SZ value needed to cover the ID map
+ *
+ * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
+ * entire ID map region can be mapped. As T0SZ == (64 - #bits used),
+ * this number conveniently equals the number of leading zeroes in
+ * the physical address of _end.
+ */
+ .macro idmap_get_t0sz, reg
+ adrp \reg, _end
+ orr \reg, \reg, #(1 << VA_BITS_MIN) - 1
+ clz \reg, \reg
+ .endm
+
/*
* tcr_compute_pa_size - set TCR.(I)PS to the highest supported
* ID_AA64MMFR0_EL1.PARange value
b.lo .Ldcache_op\@
dsb \domain
- _cond_extable .Ldcache_op\@, \fixup
+ _cond_uaccess_extable .Ldcache_op\@, \fixup
.endm
/*
dsb ish
isb
- _cond_extable .Licache_op\@, \fixup
+ _cond_uaccess_extable .Licache_op\@, \fixup
+ .endm
+
+/*
+ * load_ttbr1 - install @pgtbl as a TTBR1 page table
+ * pgtbl preserved
+ * tmp1/tmp2 clobbered, either may overlap with pgtbl
+ */
+ .macro load_ttbr1, pgtbl, tmp1, tmp2
+ phys_to_ttbr \tmp1, \pgtbl
+ offset_ttbr1 \tmp1, \tmp2
+ msr ttbr1_el1, \tmp1
+ isb
.endm
/*
isb
tlbi vmalle1
dsb nsh
- phys_to_ttbr \tmp, \page_table
- offset_ttbr1 \tmp, \tmp2
- msr ttbr1_el1, \tmp
- isb
+ load_ttbr1 \page_table, \tmp, \tmp2
.endm
/*
#define pmr_sync() do {} while (0)
#endif
-#define mb() dsb(sy)
-#define rmb() dsb(ld)
-#define wmb() dsb(st)
+#define __mb() dsb(sy)
+#define __rmb() dsb(ld)
+#define __wmb() dsb(st)
-#define dma_mb() dmb(osh)
-#define dma_rmb() dmb(oshld)
-#define dma_wmb() dmb(oshst)
+#define __dma_mb() dmb(osh)
+#define __dma_rmb() dmb(oshld)
+#define __dma_wmb() dmb(oshst)
#define io_stop_wc() dgh()
#ifndef __ASM_CACHE_H
#define __ASM_CACHE_H
-#include <asm/cputype.h>
-#include <asm/mte-def.h>
-
-#define CTR_L1IP_SHIFT 14
-#define CTR_L1IP_MASK 3
-#define CTR_DMINLINE_SHIFT 16
-#define CTR_IMINLINE_SHIFT 0
-#define CTR_IMINLINE_MASK 0xf
-#define CTR_ERG_SHIFT 20
-#define CTR_CWG_SHIFT 24
-#define CTR_CWG_MASK 15
-#define CTR_IDC_SHIFT 28
-#define CTR_DIC_SHIFT 29
-
-#define CTR_CACHE_MINLINE_MASK \
- (0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT)
-
-#define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK)
-
-#define ICACHE_POLICY_VPIPT 0
-#define ICACHE_POLICY_RESERVED 1
-#define ICACHE_POLICY_VIPT 2
-#define ICACHE_POLICY_PIPT 3
-
#define L1_CACHE_SHIFT (6)
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
#define CLIDR_LOUU_SHIFT 27
#define CLIDR_LOC_SHIFT 24
#define CLIDR_LOUIS_SHIFT 21
#include <linux/bitops.h>
#include <linux/kasan-enabled.h>
+#include <asm/cputype.h>
+#include <asm/mte-def.h>
+#include <asm/sysreg.h>
+
#ifdef CONFIG_KASAN_SW_TAGS
#define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT)
#elif defined(CONFIG_KASAN_HW_TAGS)
#define arch_slab_minalign() arch_slab_minalign()
#endif
+#define CTR_CACHE_MINLINE_MASK \
+ (0xf << CTR_EL0_DMINLINE_SHIFT | \
+ CTR_EL0_IMINLINE_MASK << CTR_EL0_IMINLINE_SHIFT)
+
+#define CTR_L1IP(ctr) SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
+
#define ICACHEF_ALIASING 0
#define ICACHEF_VPIPT 1
extern unsigned long __icache_flags;
static inline u32 cache_type_cwg(void)
{
- return (read_cpuid_cachetype() >> CTR_CWG_SHIFT) & CTR_CWG_MASK;
+ return (read_cpuid_cachetype() >> CTR_EL0_CWG_SHIFT) & CTR_EL0_CWG_MASK;
}
#define __read_mostly __section(".data..read_mostly")
{
u32 ctr = read_cpuid_cachetype();
- if (!(ctr & BIT(CTR_IDC_SHIFT))) {
+ if (!(ctr & BIT(CTR_EL0_IDC_SHIFT))) {
u64 clidr = read_sysreg(clidr_el1);
if (CLIDR_LOC(clidr) == 0 ||
(CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0))
- ctr |= BIT(CTR_IDC_SHIFT);
+ ctr |= BIT(CTR_EL0_IDC_SHIFT);
}
return ctr;
}
#define flush_icache_range flush_icache_range
-/*
- * Cache maintenance functions used by the DMA API. No to be used directly.
- */
-extern void __dma_map_area(const void *, size_t, int);
-extern void __dma_unmap_area(const void *, size_t, int);
-extern void __dma_flush_area(const void *, size_t);
-
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user
u64 reg_midr;
u64 reg_revidr;
u64 reg_gmid;
+ u64 reg_smidr;
u64 reg_id_aa64dfr0;
u64 reg_id_aa64dfr1;
* @cpu_die: Makes a cpu leave the kernel. Must not fail. Called from the
* cpu being killed.
* @cpu_kill: Ensures a cpu has left the kernel. Called from another cpu.
- * @cpu_init_idle: Reads any data necessary to initialize CPU idle states for
- * a proposed logical id.
- * @cpu_suspend: Suspends a cpu and saves the required context. May fail owing
- * to wrong parameters or error conditions. Called from the
- * CPU being suspended. Must be called with IRQs disabled.
*/
struct cpu_operations {
const char *name;
void (*cpu_die)(unsigned int cpu);
int (*cpu_kill)(unsigned int cpu);
#endif
-#ifdef CONFIG_CPU_IDLE
- int (*cpu_init_idle)(unsigned int);
- int (*cpu_suspend)(unsigned long);
-#endif
};
int __init init_cpu_ops(int cpu);
#include <asm/hwcap.h>
#include <asm/sysreg.h>
-#define MAX_CPU_FEATURES 64
+#define MAX_CPU_FEATURES 128
#define cpu_feature(x) KERNEL_HWCAP_ ## x
#ifndef __ASSEMBLY__
isar2 = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
return cpuid_feature_extract_unsigned_field(isar2,
- ID_AA64ISAR2_CLEARBHB_SHIFT);
+ ID_AA64ISAR2_EL1_BC_SHIFT);
}
const struct cpumask *system_32bit_el0_cpumask(void);
}
extern struct arm64_ftr_override id_aa64mmfr1_override;
+extern struct arm64_ftr_override id_aa64pfr0_override;
extern struct arm64_ftr_override id_aa64pfr1_override;
+extern struct arm64_ftr_override id_aa64zfr0_override;
+extern struct arm64_ftr_override id_aa64smfr0_override;
extern struct arm64_ftr_override id_aa64isar1_override;
extern struct arm64_ftr_override id_aa64isar2_override;
#include <asm/proc-fns.h>
-#ifdef CONFIG_CPU_IDLE
-extern int arm_cpuidle_init(unsigned int cpu);
-extern int arm_cpuidle_suspend(int index);
-#else
-static inline int arm_cpuidle_init(unsigned int cpu)
-{
- return -EOPNOTSUPP;
-}
-
-static inline int arm_cpuidle_suspend(int index)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
#ifdef CONFIG_ARM64_PSEUDO_NMI
#include <asm/arch_gicv3.h>
msr cptr_el2, x0 // Disable copro. traps to EL2
.endm
-/* SVE register access */
-.macro __init_el2_nvhe_sve
- mrs x1, id_aa64pfr0_el1
- ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
- cbz x1, .Lskip_sve_\@
-
- bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
- msr cptr_el2, x0 // Disable copro. traps to EL2
- isb
- mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
- msr_s SYS_ZCR_EL2, x1 // length for EL1.
-.Lskip_sve_\@:
-.endm
-
-/* SME register access and priority mapping */
-.macro __init_el2_nvhe_sme
- mrs x1, id_aa64pfr1_el1
- ubfx x1, x1, #ID_AA64PFR1_SME_SHIFT, #4
- cbz x1, .Lskip_sme_\@
-
- bic x0, x0, #CPTR_EL2_TSM // Also disable SME traps
- msr cptr_el2, x0 // Disable copro. traps to EL2
- isb
-
- mrs x1, sctlr_el2
- orr x1, x1, #SCTLR_ELx_ENTP2 // Disable TPIDR2 traps
- msr sctlr_el2, x1
- isb
-
- mov x1, #0 // SMCR controls
-
- mrs_s x2, SYS_ID_AA64SMFR0_EL1
- ubfx x2, x2, #ID_AA64SMFR0_FA64_SHIFT, #1 // Full FP in SM?
- cbz x2, .Lskip_sme_fa64_\@
-
- orr x1, x1, SMCR_ELx_FA64_MASK
-.Lskip_sme_fa64_\@:
-
- orr x1, x1, #SMCR_ELx_LEN_MASK // Enable full SME vector
- msr_s SYS_SMCR_EL2, x1 // length for EL1.
-
- mrs_s x1, SYS_SMIDR_EL1 // Priority mapping supported?
- ubfx x1, x1, #SMIDR_EL1_SMPS_SHIFT, #1
- cbz x1, .Lskip_sme_\@
-
- msr_s SYS_SMPRIMAP_EL2, xzr // Make all priorities equal
-
- mrs x1, id_aa64mmfr1_el1 // HCRX_EL2 present?
- ubfx x1, x1, #ID_AA64MMFR1_HCX_SHIFT, #4
- cbz x1, .Lskip_sme_\@
-
- mrs_s x1, SYS_HCRX_EL2
- orr x1, x1, #HCRX_EL2_SMPME_MASK // Enable priority mapping
- msr_s SYS_HCRX_EL2, x1
-
-.Lskip_sme_\@:
-.endm
-
/* Disable any fine grained traps */
.macro __init_el2_fgt
mrs x1, id_aa64mmfr0_el1
__init_el2_hstr
__init_el2_nvhe_idregs
__init_el2_nvhe_cptr
- __init_el2_nvhe_sve
- __init_el2_nvhe_sme
__init_el2_fgt
__init_el2_nvhe_prepare_eret
.endm
#endif /* CONFIG_ACPI_APEI_GHES */
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+#ifdef CONFIG_RELOCATABLE
+ FIX_ENTRY_TRAMP_TEXT4, /* one extra slot for the data page */
+#endif
FIX_ENTRY_TRAMP_TEXT3,
FIX_ENTRY_TRAMP_TEXT2,
FIX_ENTRY_TRAMP_TEXT1,
- FIX_ENTRY_TRAMP_DATA,
#define TRAMP_VALIAS (__fix_to_virt(FIX_ENTRY_TRAMP_TEXT1))
#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
__end_of_permanent_fixed_addresses,
#define KERNEL_HWCAP_PACA __khwcap_feature(PACA)
#define KERNEL_HWCAP_PACG __khwcap_feature(PACG)
-#define __khwcap2_feature(x) (const_ilog2(HWCAP2_ ## x) + 32)
+#define __khwcap2_feature(x) (const_ilog2(HWCAP2_ ## x) + 64)
#define KERNEL_HWCAP_DCPODP __khwcap2_feature(DCPODP)
#define KERNEL_HWCAP_SVE2 __khwcap2_feature(SVE2)
#define KERNEL_HWCAP_SVEAES __khwcap2_feature(SVEAES)
#define KERNEL_HWCAP_SME_F32F32 __khwcap2_feature(SME_F32F32)
#define KERNEL_HWCAP_SME_FA64 __khwcap2_feature(SME_FA64)
#define KERNEL_HWCAP_WFXT __khwcap2_feature(WFXT)
+#define KERNEL_HWCAP_EBF16 __khwcap2_feature(EBF16)
/*
* This yields a mask that user programs can use to figure out what
/*
* I/O memory mapping functions.
*/
-extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot);
-extern void iounmap(volatile void __iomem *addr);
-extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
-#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
-#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
-#define ioremap_np(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
+bool ioremap_allowed(phys_addr_t phys_addr, size_t size, unsigned long prot);
+#define ioremap_allowed ioremap_allowed
+
+#define _PAGE_IOREMAP PROT_DEVICE_nGnRE
+
+#define ioremap_wc(addr, size) \
+ ioremap_prot((addr), (size), PROT_NORMAL_NC)
+#define ioremap_np(addr, size) \
+ ioremap_prot((addr), (size), PROT_DEVICE_nGnRnE)
/*
* io{read,write}{16,32,64}be() macros
#include <asm-generic/io.h>
+#define ioremap_cache ioremap_cache
+static inline void __iomem *ioremap_cache(phys_addr_t addr, size_t size)
+{
+ if (pfn_is_map_memory(__phys_to_pfn(addr)))
+ return (void __iomem *)__phys_to_virt(addr);
+
+ return ioremap_prot(addr, size, PROT_NORMAL);
+}
+
/*
* More restrictive address range checking than the default implementation
* (PHYS_OFFSET and PHYS_MASK taken into account).
#ifndef __ASM_KERNEL_PGTABLE_H
#define __ASM_KERNEL_PGTABLE_H
+#include <asm/boot.h>
#include <asm/pgtable-hwdef.h>
#include <asm/sparsemem.h>
*/
#if ARM64_KERNEL_USES_PMD_MAPS
#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS - 1)
-#define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT) - 1)
#else
#define SWAPPER_PGTABLE_LEVELS (CONFIG_PGTABLE_LEVELS)
-#define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT))
#endif
+ EARLY_PUDS((vstart), (vend)) /* each PUD needs a next level page table */ \
+ EARLY_PMDS((vstart), (vend))) /* each PMD needs a next level page table */
#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end))
-#define IDMAP_DIR_SIZE (IDMAP_PGTABLE_LEVELS * PAGE_SIZE)
+
+/* the initial ID map may need two extra pages if it needs to be extended */
+#if VA_BITS < 48
+#define INIT_IDMAP_DIR_SIZE ((INIT_IDMAP_DIR_PAGES + 2) * PAGE_SIZE)
+#else
+#define INIT_IDMAP_DIR_SIZE (INIT_IDMAP_DIR_PAGES * PAGE_SIZE)
+#endif
+#define INIT_IDMAP_DIR_PAGES EARLY_PAGES(KIMAGE_VADDR, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE)
/* Initial memory map size */
#if ARM64_KERNEL_USES_PMD_MAPS
#define SWAPPER_PMD_FLAGS (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
#if ARM64_KERNEL_USES_PMD_MAPS
-#define SWAPPER_MM_MMUFLAGS (PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
+#define SWAPPER_RW_MMUFLAGS (PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
+#define SWAPPER_RX_MMUFLAGS (SWAPPER_RW_MMUFLAGS | PMD_SECT_RDONLY)
#else
-#define SWAPPER_MM_MMUFLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
+#define SWAPPER_RW_MMUFLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
+#define SWAPPER_RX_MMUFLAGS (SWAPPER_RW_MMUFLAGS | PTE_RDONLY)
#endif
/*
#include <linux/types.h>
#include <asm/bug.h>
+#if VA_BITS > 48
extern u64 vabits_actual;
+#else
+#define vabits_actual ((u64)VA_BITS)
+#endif
extern s64 memstart_addr;
/* PHYS_OFFSET - the physical address of the start of memory. */
})
void dump_mem_limit(void);
+
+static inline bool defer_reserve_crashkernel(void)
+{
+ return IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32);
+}
#endif /* !ASSEMBLY */
/*
* TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in
* physical memory, in which case it will be smaller.
*/
-extern u64 idmap_t0sz;
-extern u64 idmap_ptrs_per_pgd;
+extern int idmap_t0sz;
/*
* Ensure TCR.T0SZ is set to the provided value.
cpu_switch_mm(mm->pgd, mm);
}
-static inline void cpu_install_idmap(void)
+static inline void __cpu_install_idmap(pgd_t *idmap)
{
cpu_set_reserved_ttbr0();
local_flush_tlb_all();
cpu_set_idmap_tcr_t0sz();
- cpu_switch_mm(lm_alias(idmap_pg_dir), &init_mm);
+ cpu_switch_mm(lm_alias(idmap), &init_mm);
+}
+
+static inline void cpu_install_idmap(void)
+{
+ __cpu_install_idmap(idmap_pg_dir);
}
/*
* Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
* avoiding the possibility of conflicting TLB entries being allocated.
*/
-static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp)
+static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
{
typedef void (ttbr_replace_func)(phys_addr_t);
extern ttbr_replace_func idmap_cpu_replace_ttbr1;
replace_phys = (void *)__pa_symbol(function_nocfi(idmap_cpu_replace_ttbr1));
- cpu_install_idmap();
+ __cpu_install_idmap(idmap);
replace_phys(ttbr1);
cpu_uninstall_idmap();
}
*/
#ifdef CONFIG_ARM64_PA_BITS_52
/*
- * This should be GENMASK_ULL(47, 2).
* TTBR_ELx[1] is RES0 in this configuration.
*/
-#define TTBR_BADDR_MASK_52 (((UL(1) << 46) - 1) << 2)
+#define TTBR_BADDR_MASK_52 GENMASK_ULL(47, 2)
#endif
#ifdef CONFIG_ARM64_VA_BITS_52
__flush_tlb_range(vma, addr, end, PUD_SIZE, false, 1)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+static inline bool arch_thp_swp_supported(void)
+{
+ return !system_supports_mte();
+}
+#define arch_thp_swp_supported arch_thp_swp_supported
+
/*
* Outside of a few very special situations (e.g. hibernation), we always
* use broadcast TLB invalidation instructions, therefore a spurious page
return clear_pte_bit(pte, __pgprot(PTE_SWP_EXCLUSIVE));
}
+/*
+ * Select all bits except the pfn
+ */
+static inline pgprot_t pte_pgprot(pte_t pte)
+{
+ unsigned long pfn = pte_pfn(pte);
+
+ return __pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^ pte_val(pte));
+}
+
#ifdef CONFIG_NUMA_BALANCING
/*
* See the comment in include/linux/pgtable.h
static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
{
+ s32 previous_syscall = regs->syscallno;
memset(regs, 0, sizeof(*regs));
- forget_syscall(regs);
+ regs->syscallno = previous_syscall;
regs->pc = pc;
if (system_uses_irq_prio_masking())
#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0)
#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1)
-#define SYS_ID_AA64ZFR0_EL1 sys_reg(3, 0, 0, 4, 4)
-#define SYS_ID_AA64SMFR0_EL1 sys_reg(3, 0, 0, 4, 5)
#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
-#define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
-#define SYS_ID_AA64ISAR2_EL1 sys_reg(3, 0, 0, 6, 2)
-
#define SYS_ID_AA64MMFR0_EL1 sys_reg(3, 0, 0, 7, 0)
#define SYS_ID_AA64MMFR1_EL1 sys_reg(3, 0, 0, 7, 1)
#define SYS_ID_AA64MMFR2_EL1 sys_reg(3, 0, 0, 7, 2)
#define SYS_MAIR_EL1 sys_reg(3, 0, 10, 2, 0)
#define SYS_AMAIR_EL1 sys_reg(3, 0, 10, 3, 0)
-#define SYS_LORSA_EL1 sys_reg(3, 0, 10, 4, 0)
-#define SYS_LOREA_EL1 sys_reg(3, 0, 10, 4, 1)
-#define SYS_LORN_EL1 sys_reg(3, 0, 10, 4, 2)
-#define SYS_LORC_EL1 sys_reg(3, 0, 10, 4, 3)
-#define SYS_LORID_EL1 sys_reg(3, 0, 10, 4, 7)
-
#define SYS_VBAR_EL1 sys_reg(3, 0, 12, 0, 0)
#define SYS_DISR_EL1 sys_reg(3, 0, 12, 1, 1)
#define SYS_CNTKCTL_EL1 sys_reg(3, 0, 14, 1, 0)
#define SYS_CCSIDR_EL1 sys_reg(3, 1, 0, 0, 0)
-#define SYS_GMID_EL1 sys_reg(3, 1, 0, 0, 4)
#define SYS_AIDR_EL1 sys_reg(3, 1, 0, 0, 7)
#define SMIDR_EL1_IMPLEMENTER_SHIFT 24
#define SMIDR_EL1_SMPS_SHIFT 15
#define SMIDR_EL1_AFFINITY_SHIFT 0
-#define SYS_CTR_EL0 sys_reg(3, 3, 0, 0, 1)
-#define SYS_DCZID_EL0 sys_reg(3, 3, 0, 0, 7)
-
#define SYS_RNDR_EL0 sys_reg(3, 3, 2, 4, 0)
#define SYS_RNDRRS_EL0 sys_reg(3, 3, 2, 4, 1)
/* Position the attr at the correct index */
#define MAIR_ATTRIDX(attr, idx) ((attr) << ((idx) * 8))
-/* id_aa64isar1 */
-#define ID_AA64ISAR1_I8MM_SHIFT 52
-#define ID_AA64ISAR1_DGH_SHIFT 48
-#define ID_AA64ISAR1_BF16_SHIFT 44
-#define ID_AA64ISAR1_SPECRES_SHIFT 40
-#define ID_AA64ISAR1_SB_SHIFT 36
-#define ID_AA64ISAR1_FRINTTS_SHIFT 32
-#define ID_AA64ISAR1_GPI_SHIFT 28
-#define ID_AA64ISAR1_GPA_SHIFT 24
-#define ID_AA64ISAR1_LRCPC_SHIFT 20
-#define ID_AA64ISAR1_FCMA_SHIFT 16
-#define ID_AA64ISAR1_JSCVT_SHIFT 12
-#define ID_AA64ISAR1_API_SHIFT 8
-#define ID_AA64ISAR1_APA_SHIFT 4
-#define ID_AA64ISAR1_DPB_SHIFT 0
-
-#define ID_AA64ISAR1_APA_NI 0x0
-#define ID_AA64ISAR1_APA_ARCHITECTED 0x1
-#define ID_AA64ISAR1_APA_ARCH_EPAC 0x2
-#define ID_AA64ISAR1_APA_ARCH_EPAC2 0x3
-#define ID_AA64ISAR1_APA_ARCH_EPAC2_FPAC 0x4
-#define ID_AA64ISAR1_APA_ARCH_EPAC2_FPAC_CMB 0x5
-#define ID_AA64ISAR1_API_NI 0x0
-#define ID_AA64ISAR1_API_IMP_DEF 0x1
-#define ID_AA64ISAR1_API_IMP_DEF_EPAC 0x2
-#define ID_AA64ISAR1_API_IMP_DEF_EPAC2 0x3
-#define ID_AA64ISAR1_API_IMP_DEF_EPAC2_FPAC 0x4
-#define ID_AA64ISAR1_API_IMP_DEF_EPAC2_FPAC_CMB 0x5
-#define ID_AA64ISAR1_GPA_NI 0x0
-#define ID_AA64ISAR1_GPA_ARCHITECTED 0x1
-#define ID_AA64ISAR1_GPI_NI 0x0
-#define ID_AA64ISAR1_GPI_IMP_DEF 0x1
-
-/* id_aa64isar2 */
-#define ID_AA64ISAR2_CLEARBHB_SHIFT 28
-#define ID_AA64ISAR2_APA3_SHIFT 12
-#define ID_AA64ISAR2_GPA3_SHIFT 8
-#define ID_AA64ISAR2_RPRES_SHIFT 4
-#define ID_AA64ISAR2_WFXT_SHIFT 0
-
-#define ID_AA64ISAR2_RPRES_8BIT 0x0
-#define ID_AA64ISAR2_RPRES_12BIT 0x1
-/*
- * Value 0x1 has been removed from the architecture, and is
- * reserved, but has not yet been removed from the ARM ARM
- * as of ARM DDI 0487G.b.
- */
-#define ID_AA64ISAR2_WFXT_NI 0x0
-#define ID_AA64ISAR2_WFXT_SUPPORTED 0x2
-
-#define ID_AA64ISAR2_APA3_NI 0x0
-#define ID_AA64ISAR2_APA3_ARCHITECTED 0x1
-#define ID_AA64ISAR2_APA3_ARCH_EPAC 0x2
-#define ID_AA64ISAR2_APA3_ARCH_EPAC2 0x3
-#define ID_AA64ISAR2_APA3_ARCH_EPAC2_FPAC 0x4
-#define ID_AA64ISAR2_APA3_ARCH_EPAC2_FPAC_CMB 0x5
-
-#define ID_AA64ISAR2_GPA3_NI 0x0
-#define ID_AA64ISAR2_GPA3_ARCHITECTED 0x1
-
/* id_aa64pfr0 */
#define ID_AA64PFR0_CSV3_SHIFT 60
#define ID_AA64PFR0_CSV2_SHIFT 56
#define ID_AA64PFR1_MTE 0x2
#define ID_AA64PFR1_MTE_ASYMM 0x3
-/* id_aa64zfr0 */
-#define ID_AA64ZFR0_F64MM_SHIFT 56
-#define ID_AA64ZFR0_F32MM_SHIFT 52
-#define ID_AA64ZFR0_I8MM_SHIFT 44
-#define ID_AA64ZFR0_SM4_SHIFT 40
-#define ID_AA64ZFR0_SHA3_SHIFT 32
-#define ID_AA64ZFR0_BF16_SHIFT 20
-#define ID_AA64ZFR0_BITPERM_SHIFT 16
-#define ID_AA64ZFR0_AES_SHIFT 4
-#define ID_AA64ZFR0_SVEVER_SHIFT 0
-
-#define ID_AA64ZFR0_F64MM 0x1
-#define ID_AA64ZFR0_F32MM 0x1
-#define ID_AA64ZFR0_I8MM 0x1
-#define ID_AA64ZFR0_BF16 0x1
-#define ID_AA64ZFR0_SM4 0x1
-#define ID_AA64ZFR0_SHA3 0x1
-#define ID_AA64ZFR0_BITPERM 0x1
-#define ID_AA64ZFR0_AES 0x1
-#define ID_AA64ZFR0_AES_PMULL 0x2
-#define ID_AA64ZFR0_SVEVER_SVE2 0x1
-
-/* id_aa64smfr0 */
-#define ID_AA64SMFR0_FA64_SHIFT 63
-#define ID_AA64SMFR0_I16I64_SHIFT 52
-#define ID_AA64SMFR0_F64F64_SHIFT 48
-#define ID_AA64SMFR0_I8I32_SHIFT 36
-#define ID_AA64SMFR0_F16F32_SHIFT 35
-#define ID_AA64SMFR0_B16F32_SHIFT 34
-#define ID_AA64SMFR0_F32F32_SHIFT 32
-
-#define ID_AA64SMFR0_FA64 0x1
-#define ID_AA64SMFR0_I16I64 0xf
-#define ID_AA64SMFR0_F64F64 0x1
-#define ID_AA64SMFR0_I8I32 0xf
-#define ID_AA64SMFR0_F16F32 0x1
-#define ID_AA64SMFR0_B16F32 0x1
-#define ID_AA64SMFR0_F32F32 0x1
-
/* id_aa64mmfr0 */
#define ID_AA64MMFR0_ECV_SHIFT 60
#define ID_AA64MMFR0_FGT_SHIFT 56
/* id_aa64mmfr1 */
#define ID_AA64MMFR1_ECBHB_SHIFT 60
+#define ID_AA64MMFR1_TIDCP1_SHIFT 52
#define ID_AA64MMFR1_HCX_SHIFT 40
#define ID_AA64MMFR1_AFP_SHIFT 44
#define ID_AA64MMFR1_ETS_SHIFT 36
#define ID_AA64MMFR1_VMIDBITS_8 0
#define ID_AA64MMFR1_VMIDBITS_16 2
+#define ID_AA64MMFR1_TIDCP1_NI 0
+#define ID_AA64MMFR1_TIDCP1_IMP 1
+
/* id_aa64mmfr2 */
#define ID_AA64MMFR2_E0PD_SHIFT 60
#define ID_AA64MMFR2_EVT_SHIFT 56
#define MVFR2_FPMISC_SHIFT 4
#define MVFR2_SIMDMISC_SHIFT 0
-#define DCZID_DZP_SHIFT 4
-#define DCZID_BS_SHIFT 0
-
#define CPACR_EL1_FPEN_EL1EN (BIT(20)) /* enable EL1 access */
#define CPACR_EL1_FPEN_EL0EN (BIT(21)) /* enable EL0 access, if EL1EN set */
#define SYS_RGSR_EL1_SEED_MASK 0xffffUL
/* GMID_EL1 field definitions */
-#define SYS_GMID_EL1_BS_SHIFT 0
-#define SYS_GMID_EL1_BS_SIZE 4
+#define GMID_EL1_BS_SHIFT 0
+#define GMID_EL1_BS_SIZE 4
/* TFSR{,E0}_EL1 bit definitions */
#define SYS_TFSR_EL1_TF0_SHIFT 0
#endif
+#define SYS_FIELD_GET(reg, field, val) \
+ FIELD_GET(reg##_##field##_MASK, val)
+
#define SYS_FIELD_PREP(reg, field, val) \
FIELD_PREP(reg##_##field##_MASK, val)
* The "__xxx_error" versions set the third argument to -EFAULT if an error
* occurs, and leave it unchanged on success.
*/
-#define __get_mem_asm(load, reg, x, addr, err) \
+#define __get_mem_asm(load, reg, x, addr, err, type) \
asm volatile( \
"1: " load " " reg "1, [%2]\n" \
"2:\n" \
- _ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %w0, %w1) \
+ _ASM_EXTABLE_##type##ACCESS_ERR_ZERO(1b, 2b, %w0, %w1) \
: "+r" (err), "=&r" (x) \
: "r" (addr))
-#define __raw_get_mem(ldr, x, ptr, err) \
-do { \
- unsigned long __gu_val; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_mem_asm(ldr "b", "%w", __gu_val, (ptr), (err)); \
- break; \
- case 2: \
- __get_mem_asm(ldr "h", "%w", __gu_val, (ptr), (err)); \
- break; \
- case 4: \
- __get_mem_asm(ldr, "%w", __gu_val, (ptr), (err)); \
- break; \
- case 8: \
- __get_mem_asm(ldr, "%x", __gu_val, (ptr), (err)); \
- break; \
- default: \
- BUILD_BUG(); \
- } \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
+#define __raw_get_mem(ldr, x, ptr, err, type) \
+do { \
+ unsigned long __gu_val; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_mem_asm(ldr "b", "%w", __gu_val, (ptr), (err), type); \
+ break; \
+ case 2: \
+ __get_mem_asm(ldr "h", "%w", __gu_val, (ptr), (err), type); \
+ break; \
+ case 4: \
+ __get_mem_asm(ldr, "%w", __gu_val, (ptr), (err), type); \
+ break; \
+ case 8: \
+ __get_mem_asm(ldr, "%x", __gu_val, (ptr), (err), type); \
+ break; \
+ default: \
+ BUILD_BUG(); \
+ } \
+ (x) = (__force __typeof__(*(ptr)))__gu_val; \
} while (0)
/*
__chk_user_ptr(ptr); \
\
uaccess_ttbr0_enable(); \
- __raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err); \
+ __raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err, U); \
uaccess_ttbr0_disable(); \
\
(x) = __rgu_val; \
\
__uaccess_enable_tco_async(); \
__raw_get_mem("ldr", *((type *)(__gkn_dst)), \
- (__force type *)(__gkn_src), __gkn_err); \
+ (__force type *)(__gkn_src), __gkn_err, K); \
__uaccess_disable_tco_async(); \
\
if (unlikely(__gkn_err)) \
goto err_label; \
} while (0)
-#define __put_mem_asm(store, reg, x, addr, err) \
+#define __put_mem_asm(store, reg, x, addr, err, type) \
asm volatile( \
"1: " store " " reg "1, [%2]\n" \
"2:\n" \
- _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0) \
+ _ASM_EXTABLE_##type##ACCESS_ERR(1b, 2b, %w0) \
: "+r" (err) \
: "r" (x), "r" (addr))
-#define __raw_put_mem(str, x, ptr, err) \
-do { \
- __typeof__(*(ptr)) __pu_val = (x); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __put_mem_asm(str "b", "%w", __pu_val, (ptr), (err)); \
- break; \
- case 2: \
- __put_mem_asm(str "h", "%w", __pu_val, (ptr), (err)); \
- break; \
- case 4: \
- __put_mem_asm(str, "%w", __pu_val, (ptr), (err)); \
- break; \
- case 8: \
- __put_mem_asm(str, "%x", __pu_val, (ptr), (err)); \
- break; \
- default: \
- BUILD_BUG(); \
- } \
+#define __raw_put_mem(str, x, ptr, err, type) \
+do { \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __put_mem_asm(str "b", "%w", __pu_val, (ptr), (err), type); \
+ break; \
+ case 2: \
+ __put_mem_asm(str "h", "%w", __pu_val, (ptr), (err), type); \
+ break; \
+ case 4: \
+ __put_mem_asm(str, "%w", __pu_val, (ptr), (err), type); \
+ break; \
+ case 8: \
+ __put_mem_asm(str, "%x", __pu_val, (ptr), (err), type); \
+ break; \
+ default: \
+ BUILD_BUG(); \
+ } \
} while (0)
/*
__chk_user_ptr(__rpu_ptr); \
\
uaccess_ttbr0_enable(); \
- __raw_put_mem("sttr", __rpu_val, __rpu_ptr, err); \
+ __raw_put_mem("sttr", __rpu_val, __rpu_ptr, err, U); \
uaccess_ttbr0_disable(); \
} while (0)
\
__uaccess_enable_tco_async(); \
__raw_put_mem("str", *((type *)(__pkn_src)), \
- (__force type *)(__pkn_dst), __pkn_err); \
+ (__force type *)(__pkn_dst), __pkn_err, K); \
__uaccess_disable_tco_async(); \
\
if (unlikely(__pkn_err)) \
#define HVC_RESET_VECTORS 2
/*
- * HVC_VHE_RESTART - Upgrade the CPU from EL1 to EL2, if possible
+ * HVC_FINALISE_EL2 - Upgrade the CPU from EL1 to EL2, if possible
*/
-#define HVC_VHE_RESTART 3
+#define HVC_FINALISE_EL2 3
/* Max number of HYP stub hypercalls */
#define HVC_STUB_HCALL_NR 4
#define BOOT_CPU_MODE_EL1 (0xe11)
#define BOOT_CPU_MODE_EL2 (0xe12)
+/*
+ * Flags returned together with the boot mode, but not preserved in
+ * __boot_cpu_mode. Used by the idreg override code to work out the
+ * boot state.
+ */
+#define BOOT_CPU_FLAG_E2H BIT_ULL(32)
+
#ifndef __ASSEMBLY__
#include <asm/ptrace.h>
/*
* HWCAP flags - for AT_HWCAP
+ *
+ * Bits 62 and 63 are reserved for use by libc.
+ * Bits 32-61 are unallocated for potential use by libc.
*/
#define HWCAP_FP (1 << 0)
#define HWCAP_ASIMD (1 << 1)
#define HWCAP2_SME_F32F32 (1 << 29)
#define HWCAP2_SME_FA64 (1 << 30)
#define HWCAP2_WFXT (1UL << 31)
+#define HWCAP2_EBF16 (1UL << 32)
#endif /* _UAPI__ASM_HWCAP_H */
CFLAGS_REMOVE_syscall.o = -fstack-protector -fstack-protector-strong
CFLAGS_syscall.o += -fno-stack-protector
+# When KASAN is enabled, a stack trace is recorded for every alloc/free, which
+# can significantly impact performance. Avoid instrumenting the stack trace
+# collection code to minimize this impact.
+KASAN_SANITIZE_stacktrace.o := n
+
# It's not safe to invoke KCOV when portions of the kernel environment aren't
# available or are out-of-sync with HW state. Since `noinstr` doesn't always
# inhibit KCOV instrumentation, disable it for the entire compilation unit.
obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o
obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL) += acpi_parking_protocol.o
obj-$(CONFIG_PARAVIRT) += paravirt.o
-obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
+obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o pi/
obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate-asm.o
obj-$(CONFIG_ELF_CORE) += elfcore.o
obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o \
prot = __acpi_get_writethrough_mem_attribute();
}
}
- return __ioremap(phys, size, prot);
+ return ioremap_prot(phys, size, pgprot_val(prot));
}
/*
pxm = pa->proximity_domain;
node = acpi_map_pxm_to_node(pxm);
- if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
+ if (node == NUMA_NO_NODE) {
pr_err("SRAT: Too many proximity domains %d\n", pxm);
bad_srat();
return;
ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0,
- CTR_DMINLINE_SHIFT);
+ CTR_EL0_DminLine_SHIFT);
cur = start & ~(d_size - 1);
do {
/*
static LIST_HEAD(insn_emulation);
static int nr_insn_emulated __initdata;
static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
+static DEFINE_MUTEX(insn_emulation_mutex);
static void register_emulation_hooks(struct insn_emulation_ops *ops)
{
loff_t *ppos)
{
int ret = 0;
- struct insn_emulation *insn = (struct insn_emulation *) table->data;
+ struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
enum insn_emulation_mode prev_mode = insn->current_mode;
- table->data = &insn->current_mode;
+ mutex_lock(&insn_emulation_mutex);
ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret || !write || prev_mode == insn->current_mode)
update_insn_emulation_mode(insn, INSN_UNDEF);
}
ret:
- table->data = insn;
+ mutex_unlock(&insn_emulation_mutex);
return ret;
}
sysctl->maxlen = sizeof(int);
sysctl->procname = insn->ops->name;
- sysctl->data = insn;
+ sysctl->data = &insn->current_mode;
sysctl->extra1 = &insn->min;
sysctl->extra2 = &insn->max;
sysctl->proc_handler = emulation_proc_handler;
int scope)
{
u32 midr = read_cpuid_id();
- bool has_dic = read_cpuid_cachetype() & BIT(CTR_DIC_SHIFT);
+ bool has_dic = read_cpuid_cachetype() & BIT(CTR_EL0_DIC_SHIFT);
const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1);
WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
/* Kryo4xx Gold (rcpe to rfpe) => (r0p0 to r3p0) */
ERRATA_MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xe),
},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2441009
+ {
+ /* Cortex-A510 r0p0 -> r1p1. Fixed in r1p2 */
+ ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1),
+ },
#endif
{},
};
};
#endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+static struct midr_range broken_aarch32_aes[] = {
+ MIDR_RANGE(MIDR_CORTEX_A57, 0, 1, 0xf, 0xf),
+ MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+ {},
+};
+#endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
+
const struct arm64_cpu_capabilities arm64_errata[] = {
#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
{
#endif
#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
{
- .desc = "Qualcomm erratum 1009, or ARM erratum 1286807",
+ .desc = "Qualcomm erratum 1009, or ARM erratum 1286807, 2441009",
.capability = ARM64_WORKAROUND_REPEAT_TLBI,
.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
.matches = cpucap_multi_entry_cap_matches,
/* Cortex-A510 r0p0 - r0p1 */
ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 1)
},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+ {
+ .desc = "ARM erratum 1742098",
+ .capability = ARM64_WORKAROUND_1742098,
+ CAP_MIDR_RANGE_LIST(broken_aarch32_aes),
+ .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+ },
#endif
{
}
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
#include <asm/fpsimd.h>
+#include <asm/hwcap.h>
#include <asm/insn.h>
#include <asm/kvm_host.h>
#include <asm/mmu_context.h>
#include <asm/virt.h>
/* Kernel representation of AT_HWCAP and AT_HWCAP2 */
-static unsigned long elf_hwcap __read_mostly;
+static DECLARE_BITMAP(elf_hwcap, MAX_CPU_FEATURES) __read_mostly;
#ifdef CONFIG_COMPAT
#define COMPAT_ELF_HWCAP_DEFAULT \
};
static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_I8MM_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_DGH_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_BF16_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SPECRES_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SB_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FRINTTS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_SPECRES_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_SB_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_FRINTTS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_GPI_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_GPI_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_GPA_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_LRCPC_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FCMA_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_JSCVT_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_GPA_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_FCMA_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_API_SHIFT, 4, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_EL1_API_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_APA_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_DPB_SHIFT, 4, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_EL1_APA_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, 0),
ARM64_FTR_END,
};
static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
- ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_CLEARBHB_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_EL1_BC_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_EXACT, ID_AA64ISAR2_APA3_SHIFT, 4, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64ISAR2_EL1_APA3_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_GPA3_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_RPRES_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_WFXT_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_GPA3_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, 0),
ARM64_FTR_END,
};
static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_F64MM_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F64MM_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_F32MM_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_I8MM_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BF16_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_AES_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SVEVER_SHIFT, 4, 0),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, 0),
ARM64_FTR_END,
};
static const struct arm64_ftr_bits ftr_id_aa64smfr0[] = {
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_FA64_SHIFT, 1, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_I16I64_SHIFT, 4, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_F64F64_SHIFT, 1, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_I8I32_SHIFT, 4, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I8I32_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_F16F32_SHIFT, 1, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F16F32_SHIFT, 1, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_B16F32_SHIFT, 1, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_B16F32_SHIFT, 1, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
- FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_F32F32_SHIFT, 1, 0),
+ FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F32F32_SHIFT, 1, 0),
ARM64_FTR_END,
};
};
static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TIDCP1_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_AFP_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_ETS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TWED_SHIFT, 4, 0),
static const struct arm64_ftr_bits ftr_ctr[] = {
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DIC_SHIFT, 1, 1),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IDC_SHIFT, 1, 1),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_CWG_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_ERG_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DMINLINE_SHIFT, 4, 1),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_DIC_SHIFT, 1, 1),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_IDC_SHIFT, 1, 1),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_EL0_CWG_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_EL0_ERG_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_DminLine_SHIFT, 4, 1),
/*
* Linux can handle differing I-cache policies. Userspace JITs will
* make use of *minLine.
* If we have differing I-cache policies, report it as the weakest - VIPT.
*/
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_EXACT, CTR_L1IP_SHIFT, 2, ICACHE_POLICY_VIPT), /* L1Ip */
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IMINLINE_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_EXACT, CTR_EL0_L1Ip_SHIFT, 2, CTR_EL0_L1Ip_VIPT), /* L1Ip */
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_IminLine_SHIFT, 4, 0),
ARM64_FTR_END,
};
};
static const struct arm64_ftr_bits ftr_dczid[] = {
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, DCZID_DZP_SHIFT, 1, 1),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, DCZID_BS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, DCZID_EL0_DZP_SHIFT, 1, 1),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, DCZID_EL0_BS_SHIFT, 4, 0),
ARM64_FTR_END,
};
static const struct arm64_ftr_bits ftr_gmid[] = {
- ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, SYS_GMID_EL1_BS_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, GMID_EL1_BS_SHIFT, 4, 0),
ARM64_FTR_END,
};
static const struct arm64_ftr_bits ftr_id_dfr0[] = {
/* [31:28] TraceFilt */
- S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_PERFMON_SHIFT, 4, 0xf),
+ S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_PERFMON_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MPROFDBG_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPTRC_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPTRC_SHIFT, 4, 0),
__ARM64_FTR_REG_OVERRIDE(#id, id, table, &no_override)
struct arm64_ftr_override __ro_after_init id_aa64mmfr1_override;
+struct arm64_ftr_override __ro_after_init id_aa64pfr0_override;
struct arm64_ftr_override __ro_after_init id_aa64pfr1_override;
+struct arm64_ftr_override __ro_after_init id_aa64zfr0_override;
+struct arm64_ftr_override __ro_after_init id_aa64smfr0_override;
struct arm64_ftr_override __ro_after_init id_aa64isar1_override;
struct arm64_ftr_override __ro_after_init id_aa64isar2_override;
ARM64_FTR_REG(SYS_ID_MMFR5_EL1, ftr_id_mmfr5),
/* Op1 = 0, CRn = 0, CRm = 4 */
- ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0),
+ ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0,
+ &id_aa64pfr0_override),
ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64PFR1_EL1, ftr_id_aa64pfr1,
&id_aa64pfr1_override),
- ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_id_aa64zfr0),
- ARM64_FTR_REG(SYS_ID_AA64SMFR0_EL1, ftr_id_aa64smfr0),
+ ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ZFR0_EL1, ftr_id_aa64zfr0,
+ &id_aa64zfr0_override),
+ ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64SMFR0_EL1, ftr_id_aa64smfr0,
+ &id_aa64smfr0_override),
/* Op1 = 0, CRn = 0, CRm = 5 */
ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
init_32bit_cpu_features(&info->aarch32);
- if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+ id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+ info->reg_zcr = read_zcr_features();
init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
vec_init_vq_map(ARM64_VEC_SVE);
}
- if (id_aa64pfr1_sme(info->reg_id_aa64pfr1)) {
+ if (IS_ENABLED(CONFIG_ARM64_SME) &&
+ id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
+ info->reg_smcr = read_smcr_features();
+ /*
+ * We mask out SMPS since even if the hardware
+ * supports priorities the kernel does not at present
+ * and we block access to them.
+ */
+ info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
init_cpu_ftr_reg(SYS_SMCR_EL1, info->reg_smcr);
- if (IS_ENABLED(CONFIG_ARM64_SME))
- vec_init_vq_map(ARM64_VEC_SME);
+ vec_init_vq_map(ARM64_VEC_SME);
}
if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
taint |= check_update_ftr_reg(SYS_ID_AA64SMFR0_EL1, cpu,
info->reg_id_aa64smfr0, boot->reg_id_aa64smfr0);
- if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+ id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+ info->reg_zcr = read_zcr_features();
taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
info->reg_zcr, boot->reg_zcr);
- /* Probe vector lengths, unless we already gave up on SVE */
- if (id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) &&
- !system_capabilities_finalized())
+ /* Probe vector lengths */
+ if (!system_capabilities_finalized())
vec_update_vq_map(ARM64_VEC_SVE);
}
- if (id_aa64pfr1_sme(info->reg_id_aa64pfr1)) {
+ if (IS_ENABLED(CONFIG_ARM64_SME) &&
+ id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
+ info->reg_smcr = read_smcr_features();
+ /*
+ * We mask out SMPS since even if the hardware
+ * supports priorities the kernel does not at present
+ * and we block access to them.
+ */
+ info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
taint |= check_update_ftr_reg(SYS_SMCR_EL1, cpu,
info->reg_smcr, boot->reg_smcr);
- /* Probe vector lengths, unless we already gave up on SME */
- if (id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1)) &&
- !system_capabilities_finalized())
+ /* Probe vector lengths */
+ if (!system_capabilities_finalized())
vec_update_vq_map(ARM64_VEC_SME);
}
else
ctr = read_cpuid_effective_cachetype();
- return ctr & BIT(CTR_IDC_SHIFT);
+ return ctr & BIT(CTR_EL0_IDC_SHIFT);
}
static void cpu_emulate_effective_ctr(const struct arm64_cpu_capabilities *__unused)
* to the CTR_EL0 on this CPU and emulate it with the real/safe
* value.
*/
- if (!(read_cpuid_cachetype() & BIT(CTR_IDC_SHIFT)))
+ if (!(read_cpuid_cachetype() & BIT(CTR_EL0_IDC_SHIFT)))
sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0);
}
else
ctr = read_cpuid_cachetype();
- return ctr & BIT(CTR_DIC_SHIFT);
+ return ctr & BIT(CTR_EL0_DIC_SHIFT);
}
static bool __maybe_unused
}
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+#define KPTI_NG_TEMP_VA (-(1UL << PMD_SHIFT))
+
+extern
+void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
+ phys_addr_t size, pgprot_t prot,
+ phys_addr_t (*pgtable_alloc)(int), int flags);
+
+static phys_addr_t kpti_ng_temp_alloc;
+
+static phys_addr_t kpti_ng_pgd_alloc(int shift)
+{
+ kpti_ng_temp_alloc -= PAGE_SIZE;
+ return kpti_ng_temp_alloc;
+}
+
static void __nocfi
kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
{
- typedef void (kpti_remap_fn)(int, int, phys_addr_t);
+ typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long);
extern kpti_remap_fn idmap_kpti_install_ng_mappings;
kpti_remap_fn *remap_fn;
int cpu = smp_processor_id();
+ int levels = CONFIG_PGTABLE_LEVELS;
+ int order = order_base_2(levels);
+ u64 kpti_ng_temp_pgd_pa = 0;
+ pgd_t *kpti_ng_temp_pgd;
+ u64 alloc = 0;
if (__this_cpu_read(this_cpu_vector) == vectors) {
const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
remap_fn = (void *)__pa_symbol(function_nocfi(idmap_kpti_install_ng_mappings));
+ if (!cpu) {
+ alloc = __get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
+ kpti_ng_temp_pgd = (pgd_t *)(alloc + (levels - 1) * PAGE_SIZE);
+ kpti_ng_temp_alloc = kpti_ng_temp_pgd_pa = __pa(kpti_ng_temp_pgd);
+
+ //
+ // Create a minimal page table hierarchy that permits us to map
+ // the swapper page tables temporarily as we traverse them.
+ //
+ // The physical pages are laid out as follows:
+ //
+ // +--------+-/-------+-/------ +-\\--------+
+ // : PTE[] : | PMD[] : | PUD[] : || PGD[] :
+ // +--------+-\-------+-\------ +-//--------+
+ // ^
+ // The first page is mapped into this hierarchy at a PMD_SHIFT
+ // aligned virtual address, so that we can manipulate the PTE
+ // level entries while the mapping is active. The first entry
+ // covers the PTE[] page itself, the remaining entries are free
+ // to be used as a ad-hoc fixmap.
+ //
+ create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc),
+ KPTI_NG_TEMP_VA, PAGE_SIZE, PAGE_KERNEL,
+ kpti_ng_pgd_alloc, 0);
+ }
+
cpu_install_idmap();
- remap_fn(cpu, num_online_cpus(), __pa_symbol(swapper_pg_dir));
+ remap_fn(cpu, num_online_cpus(), kpti_ng_temp_pgd_pa, KPTI_NG_TEMP_VA);
cpu_uninstall_idmap();
- if (!cpu)
+ if (!cpu) {
+ free_pages(alloc, order);
arm64_use_ng_mappings = true;
+ }
}
#else
static void
}
#endif /* CONFIG_ARM64_MTE */
+static void elf_hwcap_fixup(void)
+{
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+ if (cpus_have_const_cap(ARM64_WORKAROUND_1742098))
+ compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES;
+#endif /* ARM64_ERRATUM_1742098 */
+}
+
#ifdef CONFIG_KVM
static bool is_kvm_protected_mode(const struct arm64_cpu_capabilities *entry, int __unused)
{
}
#endif /* CONFIG_KVM */
+static void cpu_trap_el0_impdef(const struct arm64_cpu_capabilities *__unused)
+{
+ sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_TIDCP);
+}
+
/* Internal helper functions to match cpu capability type */
static bool
cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap)
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
- .field_pos = ID_AA64ISAR1_DPB_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT,
.field_width = 4,
.min_field_value = 1,
},
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_DPB_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT,
.field_width = 4,
.min_field_value = 2,
},
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
- .field_pos = ID_AA64ISAR1_SB_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_SB_SHIFT,
.field_width = 4,
.sign = FTR_UNSIGNED,
.min_field_value = 1,
.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_APA_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_APA_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR1_APA_ARCHITECTED,
+ .min_field_value = ID_AA64ISAR1_EL1_APA_PAuth,
.matches = has_address_auth_cpucap,
},
{
.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
.sys_reg = SYS_ID_AA64ISAR2_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR2_APA3_SHIFT,
+ .field_pos = ID_AA64ISAR2_EL1_APA3_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR2_APA3_ARCHITECTED,
+ .min_field_value = ID_AA64ISAR2_EL1_APA3_PAuth,
.matches = has_address_auth_cpucap,
},
{
.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_API_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_API_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR1_API_IMP_DEF,
+ .min_field_value = ID_AA64ISAR1_EL1_API_PAuth,
.matches = has_address_auth_cpucap,
},
{
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_GPA_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_GPA_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR1_GPA_ARCHITECTED,
+ .min_field_value = ID_AA64ISAR1_EL1_GPA_IMP,
.matches = has_cpuid_feature,
},
{
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.sys_reg = SYS_ID_AA64ISAR2_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR2_GPA3_SHIFT,
+ .field_pos = ID_AA64ISAR2_EL1_GPA3_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR2_GPA3_ARCHITECTED,
+ .min_field_value = ID_AA64ISAR2_EL1_GPA3_IMP,
.matches = has_cpuid_feature,
},
{
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_GPI_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_GPI_SHIFT,
.field_width = 4,
- .min_field_value = ID_AA64ISAR1_GPI_IMP_DEF,
+ .min_field_value = ID_AA64ISAR1_EL1_GPI_IMP,
.matches = has_cpuid_feature,
},
{
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.sys_reg = SYS_ID_AA64ISAR1_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR1_LRCPC_SHIFT,
+ .field_pos = ID_AA64ISAR1_EL1_LRCPC_SHIFT,
.field_width = 4,
.matches = has_cpuid_feature,
.min_field_value = 1,
.capability = ARM64_SME_FA64,
.sys_reg = SYS_ID_AA64SMFR0_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64SMFR0_FA64_SHIFT,
+ .field_pos = ID_AA64SMFR0_EL1_FA64_SHIFT,
.field_width = 1,
- .min_field_value = ID_AA64SMFR0_FA64,
+ .min_field_value = ID_AA64SMFR0_EL1_FA64_IMP,
.matches = has_cpuid_feature,
.cpu_enable = fa64_kernel_enable,
},
.type = ARM64_CPUCAP_SYSTEM_FEATURE,
.sys_reg = SYS_ID_AA64ISAR2_EL1,
.sign = FTR_UNSIGNED,
- .field_pos = ID_AA64ISAR2_WFXT_SHIFT,
+ .field_pos = ID_AA64ISAR2_EL1_WFxT_SHIFT,
.field_width = 4,
.matches = has_cpuid_feature,
- .min_field_value = ID_AA64ISAR2_WFXT_SUPPORTED,
+ .min_field_value = ID_AA64ISAR2_EL1_WFxT_IMP,
+ },
+ {
+ .desc = "Trap EL0 IMPLEMENTATION DEFINED functionality",
+ .capability = ARM64_HAS_TIDCP1,
+ .type = ARM64_CPUCAP_SYSTEM_FEATURE,
+ .sys_reg = SYS_ID_AA64MMFR1_EL1,
+ .sign = FTR_UNSIGNED,
+ .field_pos = ID_AA64MMFR1_TIDCP1_SHIFT,
+ .field_width = 4,
+ .min_field_value = ID_AA64MMFR1_TIDCP1_IMP,
+ .matches = has_cpuid_feature,
+ .cpu_enable = cpu_trap_el0_impdef,
},
{},
};
#ifdef CONFIG_ARM64_PTR_AUTH
static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_APA_SHIFT,
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_APA_SHIFT,
4, FTR_UNSIGNED,
- ID_AA64ISAR1_APA_ARCHITECTED)
+ ID_AA64ISAR1_EL1_APA_PAuth)
},
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_APA3_SHIFT,
- 4, FTR_UNSIGNED, ID_AA64ISAR2_APA3_ARCHITECTED)
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_APA3_SHIFT,
+ 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_APA3_PAuth)
},
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_API_SHIFT,
- 4, FTR_UNSIGNED, ID_AA64ISAR1_API_IMP_DEF)
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_API_SHIFT,
+ 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_API_PAuth)
},
{},
};
static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_GPA_SHIFT,
- 4, FTR_UNSIGNED, ID_AA64ISAR1_GPA_ARCHITECTED)
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_GPA_SHIFT,
+ 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_GPA_IMP)
},
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_GPA3_SHIFT,
- 4, FTR_UNSIGNED, ID_AA64ISAR2_GPA3_ARCHITECTED)
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_GPA3_SHIFT,
+ 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_GPA3_IMP)
},
{
- HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_GPI_SHIFT,
- 4, FTR_UNSIGNED, ID_AA64ISAR1_GPI_IMP_DEF)
+ HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_GPI_SHIFT,
+ 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_GPI_IMP)
},
{},
};
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FRINTTS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_SB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_BF16_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DGH_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH),
- HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_I8MM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_FCMA_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_FRINTTS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_SB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_EBF16),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH),
+ HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM),
HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT),
#ifdef CONFIG_ARM64_SVE
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, KERNEL_HWCAP_SVE),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SVEVER_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SVEVER_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_AES, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_AES_PMULL, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BITPERM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_BITPERM, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_BF16, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SHA3_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SHA3, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SM4_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SM4, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_I8MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_I8MM, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F32MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_F32MM, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
- HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F64MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_F64MM, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BitPerm_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BF16_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SHA3_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SM4_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_I8MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F32MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
+ HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F64MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F64MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
#endif
HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS),
#ifdef CONFIG_ARM64_BTI
#endif /* CONFIG_ARM64_MTE */
HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV),
HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP),
- HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES),
- HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_WFXT_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_WFXT_SUPPORTED, CAP_HWCAP, KERNEL_HWCAP_WFXT),
+ HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES),
+ HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_WFxT_IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT),
#ifdef CONFIG_ARM64_SME
HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SME_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_SME, CAP_HWCAP, KERNEL_HWCAP_SME),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_FA64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_FA64, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_I16I64_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_I16I64, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_F64F64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_F64F64, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_I8I32_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_I8I32, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_F16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_F16F32, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_B16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_B16F32, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
- HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_F32F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_F32F32, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_FA64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_EL1_I16I64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F64F64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_I8I32_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_EL1_I8I32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F16F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_B16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_B16F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
+ HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F32F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F32F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
#endif /* CONFIG_ARM64_SME */
{},
};
void cpu_set_feature(unsigned int num)
{
- WARN_ON(num >= MAX_CPU_FEATURES);
- elf_hwcap |= BIT(num);
+ set_bit(num, elf_hwcap);
}
bool cpu_have_feature(unsigned int num)
{
- WARN_ON(num >= MAX_CPU_FEATURES);
- return elf_hwcap & BIT(num);
+ return test_bit(num, elf_hwcap);
}
EXPORT_SYMBOL_GPL(cpu_have_feature);
* note that for userspace compatibility we guarantee that bits 62
* and 63 will always be returned as 0.
*/
- return lower_32_bits(elf_hwcap);
+ return elf_hwcap[0];
}
unsigned long cpu_get_elf_hwcap2(void)
{
- return upper_32_bits(elf_hwcap);
+ return elf_hwcap[1];
}
static void __init setup_system_capabilities(void)
setup_system_capabilities();
setup_elf_hwcaps(arm64_elf_hwcaps);
- if (system_supports_32bit_el0())
+ if (system_supports_32bit_el0()) {
setup_elf_hwcaps(compat_elf_hwcaps);
+ elf_hwcap_fixup();
+ }
if (system_uses_ttbr0_pan())
pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
cpu_active_mask);
get_cpu_device(lucky_winner)->offline_disabled = true;
setup_elf_hwcaps(compat_elf_hwcaps);
+ elf_hwcap_fixup();
pr_info("Asymmetric 32-bit EL0 support detected on CPU %u; CPU hot-unplug disabled on CPU %u\n",
cpu, lucky_winner);
return 0;
static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap)
{
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
}
/*
#include <linux/of_device.h>
#include <linux/psci.h>
-#include <asm/cpuidle.h>
-#include <asm/cpu_ops.h>
-
-int arm_cpuidle_init(unsigned int cpu)
-{
- const struct cpu_operations *ops = get_cpu_ops(cpu);
- int ret = -EOPNOTSUPP;
-
- if (ops && ops->cpu_suspend && ops->cpu_init_idle)
- ret = ops->cpu_init_idle(cpu);
-
- return ret;
-}
-
-/**
- * arm_cpuidle_suspend() - function to enter a low-power idle state
- * @index: argument to pass to CPU suspend operations
- *
- * Return: 0 on success, -EOPNOTSUPP if CPU suspend hook not initialized, CPU
- * operations back-end error code otherwise.
- */
-int arm_cpuidle_suspend(int index)
-{
- int cpu = smp_processor_id();
- const struct cpu_operations *ops = get_cpu_ops(cpu);
-
- return ops->cpu_suspend(index);
-}
-
#ifdef CONFIG_ACPI
#include <acpi/processor.h>
DEFINE_PER_CPU(struct cpuinfo_arm64, cpu_data);
static struct cpuinfo_arm64 boot_cpu_data;
-static const char *icache_policy_str[] = {
- [ICACHE_POLICY_VPIPT] = "VPIPT",
- [ICACHE_POLICY_RESERVED] = "RESERVED/UNKNOWN",
- [ICACHE_POLICY_VIPT] = "VIPT",
- [ICACHE_POLICY_PIPT] = "PIPT",
-};
+static inline const char *icache_policy_str(int l1ip)
+{
+ switch (l1ip) {
+ case CTR_EL0_L1Ip_VPIPT:
+ return "VPIPT";
+ case CTR_EL0_L1Ip_VIPT:
+ return "VIPT";
+ case CTR_EL0_L1Ip_PIPT:
+ return "PIPT";
+ default:
+ return "RESERVED/UNKNOWN";
+ }
+}
unsigned long __icache_flags;
[KERNEL_HWCAP_SME_F32F32] = "smef32f32",
[KERNEL_HWCAP_SME_FA64] = "smefa64",
[KERNEL_HWCAP_WFXT] = "wfxt",
+ [KERNEL_HWCAP_EBF16] = "ebf16",
};
#ifdef CONFIG_COMPAT
CPUREGS_ATTR_RO(midr_el1, midr);
CPUREGS_ATTR_RO(revidr_el1, revidr);
+CPUREGS_ATTR_RO(smidr_el1, smidr);
static struct attribute *cpuregs_id_attrs[] = {
&cpuregs_attr_midr_el1.attr,
.name = "identification"
};
+static struct attribute *sme_cpuregs_id_attrs[] = {
+ &cpuregs_attr_smidr_el1.attr,
+ NULL
+};
+
+static const struct attribute_group sme_cpuregs_attr_group = {
+ .attrs = sme_cpuregs_id_attrs,
+ .name = "identification"
+};
+
static int cpuid_cpu_online(unsigned int cpu)
{
int rc;
rc = sysfs_create_group(&info->kobj, &cpuregs_attr_group);
if (rc)
kobject_del(&info->kobj);
+ if (system_supports_sme())
+ rc = sysfs_merge_group(&info->kobj, &sme_cpuregs_attr_group);
out:
return rc;
}
u32 l1ip = CTR_L1IP(info->reg_ctr);
switch (l1ip) {
- case ICACHE_POLICY_PIPT:
+ case CTR_EL0_L1Ip_PIPT:
break;
- case ICACHE_POLICY_VPIPT:
+ case CTR_EL0_L1Ip_VPIPT:
set_bit(ICACHEF_VPIPT, &__icache_flags);
break;
- case ICACHE_POLICY_RESERVED:
- case ICACHE_POLICY_VIPT:
+ case CTR_EL0_L1Ip_VIPT:
+ default:
/* Assume aliasing */
set_bit(ICACHEF_ALIASING, &__icache_flags);
break;
}
- pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu);
+ pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str(l1ip), cpu);
}
static void __cpuinfo_store_cpu_32bit(struct cpuinfo_32bit *info)
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
__cpuinfo_store_cpu_32bit(&info->aarch32);
- if (IS_ENABLED(CONFIG_ARM64_SVE) &&
- id_aa64pfr0_sve(info->reg_id_aa64pfr0))
- info->reg_zcr = read_zcr_features();
-
- if (IS_ENABLED(CONFIG_ARM64_SME) &&
- id_aa64pfr1_sme(info->reg_id_aa64pfr1))
- info->reg_smcr = read_smcr_features();
-
cpuinfo_detect_icache_policy(info);
}
*/
.endm
- .macro tramp_data_page dst
- adr_l \dst, .entry.tramp.text
- sub \dst, \dst, PAGE_SIZE
- .endm
-
- .macro tramp_data_read_var dst, var
-#ifdef CONFIG_RANDOMIZE_BASE
- tramp_data_page \dst
- add \dst, \dst, #:lo12:__entry_tramp_data_\var
- ldr \dst, [\dst]
+ .macro tramp_data_read_var dst, var
+#ifdef CONFIG_RELOCATABLE
+ ldr \dst, .L__tramp_data_\var
+ .ifndef .L__tramp_data_\var
+ .pushsection ".entry.tramp.rodata", "a", %progbits
+ .align 3
+.L__tramp_data_\var:
+ .quad \var
+ .popsection
+ .endif
#else
- ldr \dst, =\var
+ /*
+ * As !RELOCATABLE implies !RANDOMIZE_BASE the address is always a
+ * compile time constant (and hence not secret and not worth hiding).
+ *
+ * As statically allocated kernel code and data always live in the top
+ * 47 bits of the address space we can sign-extend bit 47 and avoid an
+ * instruction to load the upper 16 bits (which must be 0xFFFF).
+ */
+ movz \dst, :abs_g2_s:\var
+ movk \dst, :abs_g1_nc:\var
+ movk \dst, :abs_g0_nc:\var
#endif
.endm
msr vbar_el1, x30
isb
.else
- ldr x30, =vectors
+ adr_l x30, vectors
.endif // \kpti == 1
.if \bhb == BHB_MITIGATION_FW
SYM_CODE_START(tramp_exit_compat)
tramp_exit 32
SYM_CODE_END(tramp_exit_compat)
-
- .ltorg
.popsection // .entry.tramp.text
-#ifdef CONFIG_RANDOMIZE_BASE
- .pushsection ".rodata", "a"
- .align PAGE_SHIFT
-SYM_DATA_START(__entry_tramp_data_start)
-__entry_tramp_data_vectors:
- .quad vectors
-#ifdef CONFIG_ARM_SDE_INTERFACE
-__entry_tramp_data___sdei_asm_handler:
- .quad __sdei_asm_handler
-#endif /* CONFIG_ARM_SDE_INTERFACE */
-__entry_tramp_data_this_cpu_vector:
- .quad this_cpu_vector
-SYM_DATA_END(__entry_tramp_data_start)
- .popsection // .rodata
-#endif /* CONFIG_RANDOMIZE_BASE */
#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
/*
* This clobbers x4, __sdei_handler() will restore this from firmware's
* copy.
*/
-.ltorg
.pushsection ".entry.tramp.text", "ax"
SYM_CODE_START(__sdei_asm_entry_trampoline)
mrs x4, ttbr1_el1
1: sdei_handler_exit exit_mode=x2
SYM_CODE_END(__sdei_asm_exit_trampoline)
NOKPROBE(__sdei_asm_exit_trampoline)
- .ltorg
.popsection // .entry.tramp.text
#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
if (system_supports_sme()) {
u64 *svcr = last->svcr;
- *svcr = read_sysreg_s(SYS_SVCR);
*svcr = read_sysreg_s(SYS_SVCR);
#include "efi-header.S"
-#define __PHYS_OFFSET KERNEL_START
-
#if (PAGE_OFFSET & 0x1fffff) != 0
#error PAGE_OFFSET must be at least 2MB aligned
#endif
* MMU = off, D-cache = off, I-cache = on or off,
* x0 = physical address to the FDT blob.
*
- * This code is mostly position independent so you call this at
- * __pa(PAGE_OFFSET).
- *
* Note that the callee-saved registers are used for storing variables
* that are useful before the MMU is enabled. The allocations are described
* in the entry routines.
* primary lowlevel boot path:
*
* Register Scope Purpose
+ * x20 primary_entry() .. __primary_switch() CPU boot mode
* x21 primary_entry() .. start_kernel() FDT pointer passed at boot in x0
+ * x22 create_idmap() .. start_kernel() ID map VA of the DT blob
* x23 primary_entry() .. start_kernel() physical misalignment/KASLR offset
- * x28 __create_page_tables() callee preserved temp register
- * x19/x20 __primary_switch() callee preserved temp registers
- * x24 __primary_switch() .. relocate_kernel() current RELR displacement
+ * x24 __primary_switch() linear map KASLR seed
+ * x25 primary_entry() .. start_kernel() supported VA size
+ * x28 create_idmap() callee preserved temp register
*/
SYM_CODE_START(primary_entry)
bl preserve_boot_args
bl init_kernel_el // w0=cpu_boot_mode
- adrp x23, __PHYS_OFFSET
- and x23, x23, MIN_KIMG_ALIGN - 1 // KASLR offset, defaults to 0
- bl set_cpu_boot_mode_flag
- bl __create_page_tables
+ mov x20, x0
+ bl create_idmap
+
/*
* The following calls CPU setup code, see arch/arm64/mm/proc.S for
* details.
* On return, the CPU will be ready for the MMU to be turned on and
* the TCR will have been set.
*/
+#if VA_BITS > 48
+ mrs_s x0, SYS_ID_AA64MMFR2_EL1
+ tst x0, #0xf << ID_AA64MMFR2_LVA_SHIFT
+ mov x0, #VA_BITS
+ mov x25, #VA_BITS_MIN
+ csel x25, x25, x0, eq
+ mov x0, x25
+#endif
bl __cpu_setup // initialise processor
b __primary_switch
SYM_CODE_END(primary_entry)
b dcache_inval_poc // tail call
SYM_CODE_END(preserve_boot_args)
-/*
- * Macro to create a table entry to the next page.
- *
- * tbl: page table address
- * virt: virtual address
- * shift: #imm page table shift
- * ptrs: #imm pointers per table page
- *
- * Preserves: virt
- * Corrupts: ptrs, tmp1, tmp2
- * Returns: tbl -> next level table page address
- */
- .macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2
- add \tmp1, \tbl, #PAGE_SIZE
- phys_to_pte \tmp2, \tmp1
- orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type
- lsr \tmp1, \virt, #\shift
- sub \ptrs, \ptrs, #1
- and \tmp1, \tmp1, \ptrs // table index
- str \tmp2, [\tbl, \tmp1, lsl #3]
- add \tbl, \tbl, #PAGE_SIZE // next level table page
- .endm
+SYM_FUNC_START_LOCAL(clear_page_tables)
+ /*
+ * Clear the init page tables.
+ */
+ adrp x0, init_pg_dir
+ adrp x1, init_pg_end
+ sub x2, x1, x0
+ mov x1, xzr
+ b __pi_memset // tail call
+SYM_FUNC_END(clear_page_tables)
/*
* Macro to populate page table entries, these entries can be pointers to the next level
* vstart: virtual address of start of range
* vend: virtual address of end of range - we map [vstart, vend]
* shift: shift used to transform virtual address into index
- * ptrs: number of entries in page table
+ * order: #imm 2log(number of entries in page table)
* istart: index in table corresponding to vstart
* iend: index in table corresponding to vend
* count: On entry: how many extra entries were required in previous level, scales
* our end index.
* On exit: returns how many extra entries required for next page table level
*
- * Preserves: vstart, vend, shift, ptrs
+ * Preserves: vstart, vend
* Returns: istart, iend, count
*/
- .macro compute_indices, vstart, vend, shift, ptrs, istart, iend, count
- lsr \iend, \vend, \shift
- mov \istart, \ptrs
- sub \istart, \istart, #1
- and \iend, \iend, \istart // iend = (vend >> shift) & (ptrs - 1)
- mov \istart, \ptrs
- mul \istart, \istart, \count
- add \iend, \iend, \istart // iend += count * ptrs
- // our entries span multiple tables
-
- lsr \istart, \vstart, \shift
- mov \count, \ptrs
- sub \count, \count, #1
- and \istart, \istart, \count
-
+ .macro compute_indices, vstart, vend, shift, order, istart, iend, count
+ ubfx \istart, \vstart, \shift, \order
+ ubfx \iend, \vend, \shift, \order
+ add \iend, \iend, \count, lsl \order
sub \count, \iend, \istart
.endm
* vend: virtual address of end of range - we map [vstart, vend - 1]
* flags: flags to use to map last level entries
* phys: physical address corresponding to vstart - physical memory is contiguous
- * pgds: the number of pgd entries
+ * order: #imm 2log(number of entries in PGD table)
+ *
+ * If extra_shift is set, an extra level will be populated if the end address does
+ * not fit in 'extra_shift' bits. This assumes vend is in the TTBR0 range.
*
* Temporaries: istart, iend, tmp, count, sv - these need to be different registers
* Preserves: vstart, flags
* Corrupts: tbl, rtbl, vend, istart, iend, tmp, count, sv
*/
- .macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv
+ .macro map_memory, tbl, rtbl, vstart, vend, flags, phys, order, istart, iend, tmp, count, sv, extra_shift
sub \vend, \vend, #1
add \rtbl, \tbl, #PAGE_SIZE
- mov \sv, \rtbl
mov \count, #0
- compute_indices \vstart, \vend, #PGDIR_SHIFT, \pgds, \istart, \iend, \count
+
+ .ifnb \extra_shift
+ tst \vend, #~((1 << (\extra_shift)) - 1)
+ b.eq .L_\@
+ compute_indices \vstart, \vend, #\extra_shift, #(PAGE_SHIFT - 3), \istart, \iend, \count
+ mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
+ .endif
+.L_\@:
+ compute_indices \vstart, \vend, #PGDIR_SHIFT, #\order, \istart, \iend, \count
mov \sv, \rtbl
+ populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
+ mov \tbl, \sv
#if SWAPPER_PGTABLE_LEVELS > 3
- compute_indices \vstart, \vend, #PUD_SHIFT, #PTRS_PER_PUD, \istart, \iend, \count
+ compute_indices \vstart, \vend, #PUD_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+ mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
- mov \sv, \rtbl
#endif
#if SWAPPER_PGTABLE_LEVELS > 2
- compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #PTRS_PER_PMD, \istart, \iend, \count
+ compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+ mov \sv, \rtbl
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
#endif
- compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #PTRS_PER_PTE, \istart, \iend, \count
- bic \count, \phys, #SWAPPER_BLOCK_SIZE - 1
- populate_entries \tbl, \count, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp
+ compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+ bic \rtbl, \phys, #SWAPPER_BLOCK_SIZE - 1
+ populate_entries \tbl, \rtbl, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp
.endm
/*
- * Setup the initial page tables. We only setup the barest amount which is
- * required to get the kernel running. The following sections are required:
- * - identity mapping to enable the MMU (low address, TTBR0)
- * - first few MB of the kernel linear mapping to jump to once the MMU has
- * been enabled
+ * Remap a subregion created with the map_memory macro with modified attributes
+ * or output address. The entire remapped region must have been covered in the
+ * invocation of map_memory.
+ *
+ * x0: last level table address (returned in first argument to map_memory)
+ * x1: start VA of the existing mapping
+ * x2: start VA of the region to update
+ * x3: end VA of the region to update (exclusive)
+ * x4: start PA associated with the region to update
+ * x5: attributes to set on the updated region
+ * x6: order of the last level mappings
*/
-SYM_FUNC_START_LOCAL(__create_page_tables)
- mov x28, lr
+SYM_FUNC_START_LOCAL(remap_region)
+ sub x3, x3, #1 // make end inclusive
- /*
- * Invalidate the init page tables to avoid potential dirty cache lines
- * being evicted. Other page tables are allocated in rodata as part of
- * the kernel image, and thus are clean to the PoC per the boot
- * protocol.
- */
- adrp x0, init_pg_dir
- adrp x1, init_pg_end
- bl dcache_inval_poc
+ // Get the index offset for the start of the last level table
+ lsr x1, x1, x6
+ bfi x1, xzr, #0, #PAGE_SHIFT - 3
- /*
- * Clear the init page tables.
- */
- adrp x0, init_pg_dir
- adrp x1, init_pg_end
- sub x1, x1, x0
-1: stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- subs x1, x1, #64
- b.ne 1b
+ // Derive the start and end indexes into the last level table
+ // associated with the provided region
+ lsr x2, x2, x6
+ lsr x3, x3, x6
+ sub x2, x2, x1
+ sub x3, x3, x1
- mov x7, SWAPPER_MM_MMUFLAGS
+ mov x1, #1
+ lsl x6, x1, x6 // block size at this level
- /*
- * Create the identity mapping.
- */
- adrp x0, idmap_pg_dir
- adrp x3, __idmap_text_start // __pa(__idmap_text_start)
-
-#ifdef CONFIG_ARM64_VA_BITS_52
- mrs_s x6, SYS_ID_AA64MMFR2_EL1
- and x6, x6, #(0xf << ID_AA64MMFR2_LVA_SHIFT)
- mov x5, #52
- cbnz x6, 1f
-#endif
- mov x5, #VA_BITS_MIN
-1:
- adr_l x6, vabits_actual
- str x5, [x6]
- dmb sy
- dc ivac, x6 // Invalidate potentially stale cache line
+ populate_entries x0, x4, x2, x3, x5, x6, x7
+ ret
+SYM_FUNC_END(remap_region)
+SYM_FUNC_START_LOCAL(create_idmap)
+ mov x28, lr
/*
- * VA_BITS may be too small to allow for an ID mapping to be created
- * that covers system RAM if that is located sufficiently high in the
- * physical address space. So for the ID map, use an extended virtual
- * range in that case, and configure an additional translation level
- * if needed.
+ * The ID map carries a 1:1 mapping of the physical address range
+ * covered by the loaded image, which could be anywhere in DRAM. This
+ * means that the required size of the VA (== PA) space is decided at
+ * boot time, and could be more than the configured size of the VA
+ * space for ordinary kernel and user space mappings.
+ *
+ * There are three cases to consider here:
+ * - 39 <= VA_BITS < 48, and the ID map needs up to 48 VA bits to cover
+ * the placement of the image. In this case, we configure one extra
+ * level of translation on the fly for the ID map only. (This case
+ * also covers 42-bit VA/52-bit PA on 64k pages).
*
- * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
- * entire ID map region can be mapped. As T0SZ == (64 - #bits used),
- * this number conveniently equals the number of leading zeroes in
- * the physical address of __idmap_text_end.
+ * - VA_BITS == 48, and the ID map needs more than 48 VA bits. This can
+ * only happen when using 64k pages, in which case we need to extend
+ * the root level table rather than add a level. Note that we can
+ * treat this case as 'always extended' as long as we take care not
+ * to program an unsupported T0SZ value into the TCR register.
+ *
+ * - Combinations that would require two additional levels of
+ * translation are not supported, e.g., VA_BITS==36 on 16k pages, or
+ * VA_BITS==39/4k pages with 5-level paging, where the input address
+ * requires more than 47 or 48 bits, respectively.
*/
- adrp x5, __idmap_text_end
- clz x5, x5
- cmp x5, TCR_T0SZ(VA_BITS_MIN) // default T0SZ small enough?
- b.ge 1f // .. then skip VA range extension
-
- adr_l x6, idmap_t0sz
- str x5, [x6]
- dmb sy
- dc ivac, x6 // Invalidate potentially stale cache line
-
#if (VA_BITS < 48)
+#define IDMAP_PGD_ORDER (VA_BITS - PGDIR_SHIFT)
#define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3)
-#define EXTRA_PTRS (1 << (PHYS_MASK_SHIFT - EXTRA_SHIFT))
/*
* If VA_BITS < 48, we have to configure an additional table level.
#if VA_BITS != EXTRA_SHIFT
#error "Mismatch between VA_BITS and page size/number of translation levels"
#endif
-
- mov x4, EXTRA_PTRS
- create_table_entry x0, x3, EXTRA_SHIFT, x4, x5, x6
#else
+#define IDMAP_PGD_ORDER (PHYS_MASK_SHIFT - PGDIR_SHIFT)
+#define EXTRA_SHIFT
/*
* If VA_BITS == 48, we don't have to configure an additional
* translation level, but the top-level table has more entries.
*/
- mov x4, #1 << (PHYS_MASK_SHIFT - PGDIR_SHIFT)
- str_l x4, idmap_ptrs_per_pgd, x5
#endif
-1:
- ldr_l x4, idmap_ptrs_per_pgd
- adr_l x6, __idmap_text_end // __pa(__idmap_text_end)
-
- map_memory x0, x1, x3, x6, x7, x3, x4, x10, x11, x12, x13, x14
-
- /*
- * Map the kernel image (starting with PHYS_OFFSET).
- */
- adrp x0, init_pg_dir
- mov_q x5, KIMAGE_VADDR // compile time __va(_text)
- add x5, x5, x23 // add KASLR displacement
- mov x4, PTRS_PER_PGD
- adrp x6, _end // runtime __pa(_end)
- adrp x3, _text // runtime __pa(_text)
- sub x6, x6, x3 // _end - _text
- add x6, x6, x5 // runtime __va(_end)
-
- map_memory x0, x1, x5, x6, x7, x3, x4, x10, x11, x12, x13, x14
+ adrp x0, init_idmap_pg_dir
+ adrp x3, _text
+ adrp x6, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
+ mov x7, SWAPPER_RX_MMUFLAGS
+
+ map_memory x0, x1, x3, x6, x7, x3, IDMAP_PGD_ORDER, x10, x11, x12, x13, x14, EXTRA_SHIFT
+
+ /* Remap the kernel page tables r/w in the ID map */
+ adrp x1, _text
+ adrp x2, init_pg_dir
+ adrp x3, init_pg_end
+ bic x4, x2, #SWAPPER_BLOCK_SIZE - 1
+ mov x5, SWAPPER_RW_MMUFLAGS
+ mov x6, #SWAPPER_BLOCK_SHIFT
+ bl remap_region
+
+ /* Remap the FDT after the kernel image */
+ adrp x1, _text
+ adrp x22, _end + SWAPPER_BLOCK_SIZE
+ bic x2, x22, #SWAPPER_BLOCK_SIZE - 1
+ bfi x22, x21, #0, #SWAPPER_BLOCK_SHIFT // remapped FDT address
+ add x3, x2, #MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
+ bic x4, x21, #SWAPPER_BLOCK_SIZE - 1
+ mov x5, SWAPPER_RW_MMUFLAGS
+ mov x6, #SWAPPER_BLOCK_SHIFT
+ bl remap_region
/*
* Since the page tables have been populated with non-cacheable
*/
dmb sy
- adrp x0, idmap_pg_dir
- adrp x1, idmap_pg_end
+ adrp x0, init_idmap_pg_dir
+ adrp x1, init_idmap_pg_end
bl dcache_inval_poc
+ ret x28
+SYM_FUNC_END(create_idmap)
+SYM_FUNC_START_LOCAL(create_kernel_mapping)
adrp x0, init_pg_dir
- adrp x1, init_pg_end
- bl dcache_inval_poc
+ mov_q x5, KIMAGE_VADDR // compile time __va(_text)
+ add x5, x5, x23 // add KASLR displacement
+ adrp x6, _end // runtime __pa(_end)
+ adrp x3, _text // runtime __pa(_text)
+ sub x6, x6, x3 // _end - _text
+ add x6, x6, x5 // runtime __va(_end)
+ mov x7, SWAPPER_RW_MMUFLAGS
- ret x28
-SYM_FUNC_END(__create_page_tables)
+ map_memory x0, x1, x5, x6, x7, x3, (VA_BITS - PGDIR_SHIFT), x10, x11, x12, x13, x14
+
+ dsb ishst // sync with page table walker
+ ret
+SYM_FUNC_END(create_kernel_mapping)
/*
* Initialize CPU registers with task-specific and cpu-specific context.
/*
* The following fragment of code is executed with the MMU enabled.
*
- * x0 = __PHYS_OFFSET
+ * x0 = __pa(KERNEL_START)
*/
SYM_FUNC_START_LOCAL(__primary_switched)
adr_l x4, init_task
sub x4, x4, x0 // the kernel virtual and
str_l x4, kimage_voffset, x5 // physical mappings
+ mov x0, x20
+ bl set_cpu_boot_mode_flag
+
// Clear BSS
adr_l x0, __bss_start
mov x1, xzr
bl __pi_memset
dsb ishst // Make zero page visible to PTW
+#if VA_BITS > 48
+ adr_l x8, vabits_actual // Set this early so KASAN early init
+ str x25, [x8] // ... observes the correct value
+ dc civac, x8 // Make visible to booting secondaries
+#endif
+
+#ifdef CONFIG_RANDOMIZE_BASE
+ adrp x5, memstart_offset_seed // Save KASLR linear map seed
+ strh w24, [x5, :lo12:memstart_offset_seed]
+#endif
#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
bl kasan_early_init
#endif
mov x0, x21 // pass FDT address in x0
bl early_fdt_map // Try mapping the FDT early
+ mov x0, x20 // pass the full boot status
bl init_feature_override // Parse cpu feature overrides
-#ifdef CONFIG_RANDOMIZE_BASE
- tst x23, ~(MIN_KIMG_ALIGN - 1) // already running randomized?
- b.ne 0f
- bl kaslr_early_init // parse FDT for KASLR options
- cbz x0, 0f // KASLR disabled? just proceed
- orr x23, x23, x0 // record KASLR offset
- ldp x29, x30, [sp], #16 // we must enable KASLR, return
- ret // to __primary_switch()
-0:
-#endif
- bl switch_to_vhe // Prefer VHE if possible
+ mov x0, x20
+ bl finalise_el2 // Prefer VHE if possible
ldp x29, x30, [sp], #16
bl start_kernel
ASM_BUG()
SYM_FUNC_END(__primary_switched)
- .pushsection ".rodata", "a"
-SYM_DATA_START(kimage_vaddr)
- .quad _text
-SYM_DATA_END(kimage_vaddr)
-EXPORT_SYMBOL(kimage_vaddr)
- .popsection
-
/*
* end early head section, begin head code that is also used for
* hotplug and needs to have the same protections as the text region
* Since we cannot always rely on ERET synchronizing writes to sysregs (e.g. if
* SCTLR_ELx.EOS is clear), we place an ISB prior to ERET.
*
- * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in w0 if
- * booted in EL1 or EL2 respectively.
+ * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if
+ * booted in EL1 or EL2 respectively, with the top 32 bits containing
+ * potential context flags. These flags are *not* stored in __boot_cpu_mode.
*/
SYM_FUNC_START(init_kernel_el)
mrs x0, CurrentEL
msr vbar_el2, x0
isb
+ mov_q x1, INIT_SCTLR_EL1_MMU_OFF
+
/*
* Fruity CPUs seem to have HCR_EL2.E2H set to RES1,
* making it impossible to start in nVHE mode. Is that
and x0, x0, #HCR_E2H
cbz x0, 1f
- /* Switching to VHE requires a sane SCTLR_EL1 as a start */
- mov_q x0, INIT_SCTLR_EL1_MMU_OFF
- msr_s SYS_SCTLR_EL12, x0
-
- /*
- * Force an eret into a helper "function", and let it return
- * to our original caller... This makes sure that we have
- * initialised the basic PSTATE state.
- */
- mov x0, #INIT_PSTATE_EL2
- msr spsr_el1, x0
- adr x0, __cpu_stick_to_vhe
- msr elr_el1, x0
- eret
+ /* Set a sane SCTLR_EL1, the VHE way */
+ msr_s SYS_SCTLR_EL12, x1
+ mov x2, #BOOT_CPU_FLAG_E2H
+ b 2f
1:
- mov_q x0, INIT_SCTLR_EL1_MMU_OFF
- msr sctlr_el1, x0
-
+ msr sctlr_el1, x1
+ mov x2, xzr
+2:
msr elr_el2, lr
mov w0, #BOOT_CPU_MODE_EL2
+ orr x0, x0, x2
eret
-
-__cpu_stick_to_vhe:
- mov x0, #HVC_VHE_RESTART
- hvc #0
- mov x0, #BOOT_CPU_MODE_EL2
- ret
SYM_FUNC_END(init_kernel_el)
/*
b.ne 1f
add x1, x1, #4
1: str w0, [x1] // Save CPU boot mode
- dmb sy
- dc ivac, x1 // Invalidate potentially stale cache line
ret
SYM_FUNC_END(set_cpu_boot_mode_flag)
-/*
- * These values are written with the MMU off, but read with the MMU on.
- * Writers will invalidate the corresponding address, discarding up to a
- * 'Cache Writeback Granule' (CWG) worth of data. The linker script ensures
- * sufficient alignment that the CWG doesn't overlap another section.
- */
- .pushsection ".mmuoff.data.write", "aw"
-/*
- * We need to find out the CPU boot mode long after boot, so we need to
- * store it in a writable variable.
- *
- * This is not in .bss, because we set it sufficiently early that the boot-time
- * zeroing of .bss would clobber it.
- */
-SYM_DATA_START(__boot_cpu_mode)
- .long BOOT_CPU_MODE_EL2
- .long BOOT_CPU_MODE_EL1
-SYM_DATA_END(__boot_cpu_mode)
-/*
- * The booting CPU updates the failed status @__early_cpu_boot_status,
- * with MMU turned off.
- */
-SYM_DATA_START(__early_cpu_boot_status)
- .quad 0
-SYM_DATA_END(__early_cpu_boot_status)
-
- .popsection
-
/*
* This provides a "holding pen" for platforms to hold all secondary
* cores are held until we're ready for them to initialise.
*/
SYM_FUNC_START(secondary_holding_pen)
bl init_kernel_el // w0=cpu_boot_mode
- bl set_cpu_boot_mode_flag
- mrs x0, mpidr_el1
+ mrs x2, mpidr_el1
mov_q x1, MPIDR_HWID_BITMASK
- and x0, x0, x1
+ and x2, x2, x1
adr_l x3, secondary_holding_pen_release
pen: ldr x4, [x3]
- cmp x4, x0
+ cmp x4, x2
b.eq secondary_startup
wfe
b pen
*/
SYM_FUNC_START(secondary_entry)
bl init_kernel_el // w0=cpu_boot_mode
- bl set_cpu_boot_mode_flag
b secondary_startup
SYM_FUNC_END(secondary_entry)
/*
* Common entry point for secondary CPUs.
*/
- bl switch_to_vhe
+ mov x20, x0 // preserve boot mode
+ bl finalise_el2
bl __cpu_secondary_check52bitva
+#if VA_BITS > 48
+ ldr_l x0, vabits_actual
+#endif
bl __cpu_setup // initialise processor
adrp x1, swapper_pg_dir
+ adrp x2, idmap_pg_dir
bl __enable_mmu
ldr x8, =__secondary_switched
br x8
SYM_FUNC_END(secondary_startup)
SYM_FUNC_START_LOCAL(__secondary_switched)
+ mov x0, x20
+ bl set_cpu_boot_mode_flag
+ str_l xzr, __early_cpu_boot_status, x3
adr_l x5, vectors
msr vbar_el1, x5
isb
*
* x0 = SCTLR_EL1 value for turning on the MMU.
* x1 = TTBR1_EL1 value
+ * x2 = ID map root table address
*
* Returns to the caller via x30/lr. This requires the caller to be covered
* by the .idmap.text section.
* If it isn't, park the CPU
*/
SYM_FUNC_START(__enable_mmu)
- mrs x2, ID_AA64MMFR0_EL1
- ubfx x2, x2, #ID_AA64MMFR0_TGRAN_SHIFT, 4
- cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED_MIN
+ mrs x3, ID_AA64MMFR0_EL1
+ ubfx x3, x3, #ID_AA64MMFR0_TGRAN_SHIFT, 4
+ cmp x3, #ID_AA64MMFR0_TGRAN_SUPPORTED_MIN
b.lt __no_granule_support
- cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED_MAX
+ cmp x3, #ID_AA64MMFR0_TGRAN_SUPPORTED_MAX
b.gt __no_granule_support
- update_early_cpu_boot_status 0, x2, x3
- adrp x2, idmap_pg_dir
- phys_to_ttbr x1, x1
phys_to_ttbr x2, x2
msr ttbr0_el1, x2 // load TTBR0
- offset_ttbr1 x1, x3
- msr ttbr1_el1, x1 // load TTBR1
- isb
+ load_ttbr1 x1, x1, x3
set_sctlr_el1 x0
SYM_FUNC_END(__enable_mmu)
SYM_FUNC_START(__cpu_secondary_check52bitva)
-#ifdef CONFIG_ARM64_VA_BITS_52
+#if VA_BITS > 48
ldr_l x0, vabits_actual
cmp x0, #52
b.ne 2f
* Iterate over each entry in the relocation table, and apply the
* relocations in place.
*/
- ldr w9, =__rela_offset // offset to reloc table
- ldr w10, =__rela_size // size of reloc table
-
+ adr_l x9, __rela_start
+ adr_l x10, __rela_end
mov_q x11, KIMAGE_VADDR // default virtual offset
add x11, x11, x23 // actual virtual offset
- add x9, x9, x11 // __va(.rela)
- add x10, x9, x10 // __va(.rela) + sizeof(.rela)
0: cmp x9, x10
b.hs 1f
* entry in x9, the address being relocated by the current address or
* bitmap entry in x13 and the address being relocated by the current
* bit in x14.
- *
- * Because addends are stored in place in the binary, RELR relocations
- * cannot be applied idempotently. We use x24 to keep track of the
- * currently applied displacement so that we can correctly relocate if
- * __relocate_kernel is called twice with non-zero displacements (i.e.
- * if there is both a physical misalignment and a KASLR displacement).
*/
- ldr w9, =__relr_offset // offset to reloc table
- ldr w10, =__relr_size // size of reloc table
- add x9, x9, x11 // __va(.relr)
- add x10, x9, x10 // __va(.relr) + sizeof(.relr)
-
- sub x15, x23, x24 // delta from previous offset
- cbz x15, 7f // nothing to do if unchanged
- mov x24, x23 // save new offset
+ adr_l x9, __relr_start
+ adr_l x10, __relr_end
2: cmp x9, x10
b.hs 7f
tbnz x11, #0, 3f // branch to handle bitmaps
add x13, x11, x23
ldr x12, [x13] // relocate address entry
- add x12, x12, x15
+ add x12, x12, x23
str x12, [x13], #8 // adjust to start of bitmap
b 2b
cbz x11, 6f
tbz x11, #0, 5f // skip bit if not set
ldr x12, [x14] // relocate bit
- add x12, x12, x15
+ add x12, x12, x23
str x12, [x14]
5: add x14, x14, #8 // move to next bit's address
#endif
SYM_FUNC_START_LOCAL(__primary_switch)
+ adrp x1, reserved_pg_dir
+ adrp x2, init_idmap_pg_dir
+ bl __enable_mmu
+#ifdef CONFIG_RELOCATABLE
+ adrp x23, KERNEL_START
+ and x23, x23, MIN_KIMG_ALIGN - 1
#ifdef CONFIG_RANDOMIZE_BASE
- mov x19, x0 // preserve new SCTLR_EL1 value
- mrs x20, sctlr_el1 // preserve old SCTLR_EL1 value
+ mov x0, x22
+ adrp x1, init_pg_end
+ mov sp, x1
+ mov x29, xzr
+ bl __pi_kaslr_early_init
+ and x24, x0, #SZ_2M - 1 // capture memstart offset seed
+ bic x0, x0, #SZ_2M - 1
+ orr x23, x23, x0 // record kernel offset
+#endif
#endif
+ bl clear_page_tables
+ bl create_kernel_mapping
adrp x1, init_pg_dir
- bl __enable_mmu
+ load_ttbr1 x1, x1, x2
#ifdef CONFIG_RELOCATABLE
-#ifdef CONFIG_RELR
- mov x24, #0 // no RELR displacement yet
-#endif
bl __relocate_kernel
-#ifdef CONFIG_RANDOMIZE_BASE
- ldr x8, =__primary_switched
- adrp x0, __PHYS_OFFSET
- blr x8
-
- /*
- * If we return here, we have a KASLR displacement in x23 which we need
- * to take into account by discarding the current kernel mapping and
- * creating a new one.
- */
- pre_disable_mmu_workaround
- msr sctlr_el1, x20 // disable the MMU
- isb
- bl __create_page_tables // recreate kernel mapping
-
- tlbi vmalle1 // Remove any stale TLB entries
- dsb nsh
- isb
-
- set_sctlr_el1 x19 // re-enable the MMU
-
- bl __relocate_kernel
-#endif
#endif
ldr x8, =__primary_switched
- adrp x0, __PHYS_OFFSET
+ adrp x0, KERNEL_START // __pa(KERNEL_START)
br x8
SYM_FUNC_END(__primary_switch)
unsigned long pfn = xa_state.xa_index;
struct page *page = pfn_to_online_page(pfn);
- /*
- * It is not required to invoke page_kasan_tag_reset(page)
- * at this point since the tags stored in page->flags are
- * already restored.
- */
mte_restore_page_tags(page_address(page), tags);
mte_free_tag_storage(tags);
#include <asm/ptrace.h>
#include <asm/virt.h>
+// Warning, hardcoded register allocation
+// This will clobber x1 and x2, and expect x1 to contain
+// the id register value as read from the HW
+.macro __check_override idreg, fld, width, pass, fail
+ ubfx x1, x1, #\fld, #\width
+ cbz x1, \fail
+
+ adr_l x1, \idreg\()_override
+ ldr x2, [x1, FTR_OVR_VAL_OFFSET]
+ ldr x1, [x1, FTR_OVR_MASK_OFFSET]
+ ubfx x2, x2, #\fld, #\width
+ ubfx x1, x1, #\fld, #\width
+ cmp x1, xzr
+ and x2, x2, x1
+ csinv x2, x2, xzr, ne
+ cbnz x2, \pass
+ b \fail
+.endm
+
+.macro check_override idreg, fld, pass, fail
+ mrs x1, \idreg\()_el1
+ __check_override \idreg \fld 4 \pass \fail
+.endm
+
.text
.pushsection .hyp.text, "ax"
msr vbar_el2, x1
b 9f
-1: cmp x0, #HVC_VHE_RESTART
- b.eq mutate_to_vhe
+1: cmp x0, #HVC_FINALISE_EL2
+ b.eq __finalise_el2
2: cmp x0, #HVC_SOFT_RESTART
b.ne 3f
eret
SYM_CODE_END(elx_sync)
-// nVHE? No way! Give me the real thing!
-SYM_CODE_START_LOCAL(mutate_to_vhe)
+SYM_CODE_START_LOCAL(__finalise_el2)
+ check_override id_aa64pfr0 ID_AA64PFR0_SVE_SHIFT .Linit_sve .Lskip_sve
+
+.Linit_sve: /* SVE register access */
+ mrs x0, cptr_el2 // Disable SVE traps
+ bic x0, x0, #CPTR_EL2_TZ
+ msr cptr_el2, x0
+ isb
+ mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
+ msr_s SYS_ZCR_EL2, x1 // length for EL1.
+
+.Lskip_sve:
+ check_override id_aa64pfr1 ID_AA64PFR1_SME_SHIFT .Linit_sme .Lskip_sme
+
+.Linit_sme: /* SME register access and priority mapping */
+ mrs x0, cptr_el2 // Disable SME traps
+ bic x0, x0, #CPTR_EL2_TSM
+ msr cptr_el2, x0
+ isb
+
+ mrs x1, sctlr_el2
+ orr x1, x1, #SCTLR_ELx_ENTP2 // Disable TPIDR2 traps
+ msr sctlr_el2, x1
+ isb
+
+ mov x0, #0 // SMCR controls
+
+ // Full FP in SM?
+ mrs_s x1, SYS_ID_AA64SMFR0_EL1
+ __check_override id_aa64smfr0 ID_AA64SMFR0_EL1_FA64_SHIFT 1 .Linit_sme_fa64 .Lskip_sme_fa64
+
+.Linit_sme_fa64:
+ orr x0, x0, SMCR_ELx_FA64_MASK
+.Lskip_sme_fa64:
+
+ orr x0, x0, #SMCR_ELx_LEN_MASK // Enable full SME vector
+ msr_s SYS_SMCR_EL2, x0 // length for EL1.
+
+ mrs_s x1, SYS_SMIDR_EL1 // Priority mapping supported?
+ ubfx x1, x1, #SMIDR_EL1_SMPS_SHIFT, #1
+ cbz x1, .Lskip_sme
+
+ msr_s SYS_SMPRIMAP_EL2, xzr // Make all priorities equal
+
+ mrs x1, id_aa64mmfr1_el1 // HCRX_EL2 present?
+ ubfx x1, x1, #ID_AA64MMFR1_HCX_SHIFT, #4
+ cbz x1, .Lskip_sme
+
+ mrs_s x1, SYS_HCRX_EL2
+ orr x1, x1, #HCRX_EL2_SMPME_MASK // Enable priority mapping
+ msr_s SYS_HCRX_EL2, x1
+
+.Lskip_sme:
+
+ // nVHE? No way! Give me the real thing!
// Sanity check: MMU *must* be off
mrs x1, sctlr_el2
tbnz x1, #0, 1f
// Needs to be VHE capable, obviously
- mrs x1, id_aa64mmfr1_el1
- ubfx x1, x1, #ID_AA64MMFR1_VHE_SHIFT, #4
- cbz x1, 1f
-
- // Check whether VHE is disabled from the command line
- adr_l x1, id_aa64mmfr1_override
- ldr x2, [x1, FTR_OVR_VAL_OFFSET]
- ldr x1, [x1, FTR_OVR_MASK_OFFSET]
- ubfx x2, x2, #ID_AA64MMFR1_VHE_SHIFT, #4
- ubfx x1, x1, #ID_AA64MMFR1_VHE_SHIFT, #4
- cmp x1, xzr
- and x2, x2, x1
- csinv x2, x2, xzr, ne
- cbnz x2, 2f
+ check_override id_aa64mmfr1 ID_AA64MMFR1_VHE_SHIFT 2f 1f
1: mov_q x0, HVC_STUB_ERR
eret
msr spsr_el1, x0
b enter_vhe
-SYM_CODE_END(mutate_to_vhe)
+SYM_CODE_END(__finalise_el2)
// At the point where we reach enter_vhe(), we run with
- // the MMU off (which is enforced by mutate_to_vhe()).
+ // the MMU off (which is enforced by __finalise_el2()).
// We thus need to be in the idmap, or everything will
// explode when enabling the MMU.
SYM_FUNC_END(__hyp_reset_vectors)
/*
- * Entry point to switch to VHE if deemed capable
+ * Entry point to finalise EL2 and switch to VHE if deemed capable
+ *
+ * w0: boot mode, as returned by init_kernel_el()
*/
-SYM_FUNC_START(switch_to_vhe)
+SYM_FUNC_START(finalise_el2)
// Need to have booted at EL2
- adr_l x1, __boot_cpu_mode
- ldr w0, [x1]
cmp w0, #BOOT_CPU_MODE_EL2
b.ne 1f
cmp x0, #CurrentEL_EL1
b.ne 1f
- // Turn the world upside down
- mov x0, #HVC_VHE_RESTART
+ mov x0, #HVC_FINALISE_EL2
hvc #0
1:
ret
-SYM_FUNC_END(switch_to_vhe)
+SYM_FUNC_END(finalise_el2)
#define FTR_ALIAS_NAME_LEN 30
#define FTR_ALIAS_OPTION_LEN 116
+static u64 __boot_status __initdata;
+
struct ftr_set_desc {
char name[FTR_DESC_NAME_LEN];
struct arm64_ftr_override *override;
struct {
char name[FTR_DESC_FIELD_LEN];
u8 shift;
+ u8 width;
bool (*filter)(u64 val);
} fields[];
};
+#define FIELD(n, s, f) { .name = n, .shift = s, .width = 4, .filter = f }
+
static bool __init mmfr1_vh_filter(u64 val)
{
/*
* the user was trying to force nVHE on us, proceed with
* attitude adjustment.
*/
- return !(is_kernel_in_hyp_mode() && val == 0);
+ return !(__boot_status == (BOOT_CPU_FLAG_E2H | BOOT_CPU_MODE_EL2) &&
+ val == 0);
}
static const struct ftr_set_desc mmfr1 __initconst = {
.name = "id_aa64mmfr1",
.override = &id_aa64mmfr1_override,
.fields = {
- { "vh", ID_AA64MMFR1_VHE_SHIFT, mmfr1_vh_filter },
+ FIELD("vh", ID_AA64MMFR1_VHE_SHIFT, mmfr1_vh_filter),
+ {}
+ },
+};
+
+static bool __init pfr0_sve_filter(u64 val)
+{
+ /*
+ * Disabling SVE also means disabling all the features that
+ * are associated with it. The easiest way to do it is just to
+ * override id_aa64zfr0_el1 to be 0.
+ */
+ if (!val) {
+ id_aa64zfr0_override.val = 0;
+ id_aa64zfr0_override.mask = GENMASK(63, 0);
+ }
+
+ return true;
+}
+
+static const struct ftr_set_desc pfr0 __initconst = {
+ .name = "id_aa64pfr0",
+ .override = &id_aa64pfr0_override,
+ .fields = {
+ FIELD("sve", ID_AA64PFR0_SVE_SHIFT, pfr0_sve_filter),
{}
},
};
+static bool __init pfr1_sme_filter(u64 val)
+{
+ /*
+ * Similarly to SVE, disabling SME also means disabling all
+ * the features that are associated with it. Just set
+ * id_aa64smfr0_el1 to 0 and don't look back.
+ */
+ if (!val) {
+ id_aa64smfr0_override.val = 0;
+ id_aa64smfr0_override.mask = GENMASK(63, 0);
+ }
+
+ return true;
+}
+
static const struct ftr_set_desc pfr1 __initconst = {
.name = "id_aa64pfr1",
.override = &id_aa64pfr1_override,
.fields = {
- { "bt", ID_AA64PFR1_BT_SHIFT },
- { "mte", ID_AA64PFR1_MTE_SHIFT},
+ FIELD("bt", ID_AA64PFR1_BT_SHIFT, NULL ),
+ FIELD("mte", ID_AA64PFR1_MTE_SHIFT, NULL),
+ FIELD("sme", ID_AA64PFR1_SME_SHIFT, pfr1_sme_filter),
{}
},
};
.name = "id_aa64isar1",
.override = &id_aa64isar1_override,
.fields = {
- { "gpi", ID_AA64ISAR1_GPI_SHIFT },
- { "gpa", ID_AA64ISAR1_GPA_SHIFT },
- { "api", ID_AA64ISAR1_API_SHIFT },
- { "apa", ID_AA64ISAR1_APA_SHIFT },
+ FIELD("gpi", ID_AA64ISAR1_EL1_GPI_SHIFT, NULL),
+ FIELD("gpa", ID_AA64ISAR1_EL1_GPA_SHIFT, NULL),
+ FIELD("api", ID_AA64ISAR1_EL1_API_SHIFT, NULL),
+ FIELD("apa", ID_AA64ISAR1_EL1_APA_SHIFT, NULL),
{}
},
};
.name = "id_aa64isar2",
.override = &id_aa64isar2_override,
.fields = {
- { "gpa3", ID_AA64ISAR2_GPA3_SHIFT },
- { "apa3", ID_AA64ISAR2_APA3_SHIFT },
+ FIELD("gpa3", ID_AA64ISAR2_EL1_GPA3_SHIFT, NULL),
+ FIELD("apa3", ID_AA64ISAR2_EL1_APA3_SHIFT, NULL),
+ {}
+ },
+};
+
+static const struct ftr_set_desc smfr0 __initconst = {
+ .name = "id_aa64smfr0",
+ .override = &id_aa64smfr0_override,
+ .fields = {
+ /* FA64 is a one bit field... :-/ */
+ { "fa64", ID_AA64SMFR0_EL1_FA64_SHIFT, 1, },
{}
},
};
.override = &kaslr_feature_override,
#endif
.fields = {
- { "disabled", 0 },
+ FIELD("disabled", 0, NULL),
{}
},
};
static const struct ftr_set_desc * const regs[] __initconst = {
&mmfr1,
+ &pfr0,
&pfr1,
&isar1,
&isar2,
+ &smfr0,
&kaslr,
};
} aliases[] __initconst = {
{ "kvm-arm.mode=nvhe", "id_aa64mmfr1.vh=0" },
{ "kvm-arm.mode=protected", "id_aa64mmfr1.vh=0" },
+ { "arm64.nosve", "id_aa64pfr0.sve=0 id_aa64pfr1.sme=0" },
+ { "arm64.nosme", "id_aa64pfr1.sme=0" },
{ "arm64.nobti", "id_aa64pfr1.bt=0" },
{ "arm64.nopauth",
"id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 "
for (f = 0; strlen(regs[i]->fields[f].name); f++) {
u64 shift = regs[i]->fields[f].shift;
- u64 mask = 0xfUL << shift;
+ u64 width = regs[i]->fields[f].width ?: 4;
+ u64 mask = GENMASK_ULL(shift + width - 1, shift);
u64 v;
if (find_field(cmdline, regs[i], f, &v))
/*
* If an override gets filtered out, advertise
- * it by setting the value to 0xf, but
+ * it by setting the value to the all-ones while
* clearing the mask... Yes, this is fragile.
*/
if (regs[i]->fields[f].filter &&
}
/* Keep checkers quiet */
-void init_feature_override(void);
+void init_feature_override(u64 boot_status);
-asmlinkage void __init init_feature_override(void)
+asmlinkage void __init init_feature_override(u64 boot_status)
{
int i;
}
}
+ __boot_status = boot_status;
+
parse_cmdline();
for (i = 0; i < ARRAY_SIZE(regs); i++) {
#error This file should only be included in vmlinux.lds.S
#endif
-#ifdef CONFIG_EFI
-
-__efistub_kernel_size = _edata - _text;
-__efistub_primary_entry_offset = primary_entry - _text;
-
+PROVIDE(__efistub_kernel_size = _edata - _text);
+PROVIDE(__efistub_primary_entry_offset = primary_entry - _text);
/*
* The EFI stub has its own symbol namespace prefixed by __efistub_, to
* linked at. The routines below are all implemented in assembler in a
* position independent manner
*/
-__efistub_memcmp = __pi_memcmp;
-__efistub_memchr = __pi_memchr;
-__efistub_memcpy = __pi_memcpy;
-__efistub_memmove = __pi_memmove;
-__efistub_memset = __pi_memset;
-__efistub_strlen = __pi_strlen;
-__efistub_strnlen = __pi_strnlen;
-__efistub_strcmp = __pi_strcmp;
-__efistub_strncmp = __pi_strncmp;
-__efistub_strrchr = __pi_strrchr;
-__efistub_dcache_clean_poc = __pi_dcache_clean_poc;
-
-#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
-__efistub___memcpy = __pi_memcpy;
-__efistub___memmove = __pi_memmove;
-__efistub___memset = __pi_memset;
-#endif
+PROVIDE(__efistub_memcmp = __pi_memcmp);
+PROVIDE(__efistub_memchr = __pi_memchr);
+PROVIDE(__efistub_memcpy = __pi_memcpy);
+PROVIDE(__efistub_memmove = __pi_memmove);
+PROVIDE(__efistub_memset = __pi_memset);
+PROVIDE(__efistub_strlen = __pi_strlen);
+PROVIDE(__efistub_strnlen = __pi_strnlen);
+PROVIDE(__efistub_strcmp = __pi_strcmp);
+PROVIDE(__efistub_strncmp = __pi_strncmp);
+PROVIDE(__efistub_strrchr = __pi_strrchr);
+PROVIDE(__efistub_dcache_clean_poc = __pi_dcache_clean_poc);
+
+PROVIDE(__efistub__text = _text);
+PROVIDE(__efistub__end = _end);
+PROVIDE(__efistub__edata = _edata);
+PROVIDE(__efistub_screen_info = screen_info);
+PROVIDE(__efistub__ctype = _ctype);
-__efistub__text = _text;
-__efistub__end = _end;
-__efistub__edata = _edata;
-__efistub_screen_info = screen_info;
-__efistub__ctype = _ctype;
+/*
+ * The __ prefixed memcpy/memset/memmove symbols are provided by KASAN, which
+ * instruments the conventional ones. Therefore, any references from the EFI
+ * stub or other position independent, low level C code should be redirected to
+ * the non-instrumented versions as well.
+ */
+PROVIDE(__efistub___memcpy = __pi_memcpy);
+PROVIDE(__efistub___memmove = __pi_memmove);
+PROVIDE(__efistub___memset = __pi_memset);
-#endif
+PROVIDE(__pi___memcpy = __pi_memcpy);
+PROVIDE(__pi___memmove = __pi_memmove);
+PROVIDE(__pi___memset = __pi_memset);
#ifdef CONFIG_KVM
aarch64_insn_patch_text_nosync(addr, insn);
}
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- /*
- * We use the architected A64 NOP in arch_static_branch, so there's no
- * need to patch an identical A64 NOP over the top of it here. The core
- * will call arch_jump_label_transform from a module notifier if the
- * NOP needs to be replaced by a branch.
- */
-}
#include <linux/pgtable.h>
#include <linux/random.h>
-#include <asm/cacheflush.h>
#include <asm/fixmap.h>
#include <asm/kernel-pgtable.h>
#include <asm/memory.h>
#include <asm/sections.h>
#include <asm/setup.h>
-enum kaslr_status {
- KASLR_ENABLED,
- KASLR_DISABLED_CMDLINE,
- KASLR_DISABLED_NO_SEED,
- KASLR_DISABLED_FDT_REMAP,
-};
-
-static enum kaslr_status __initdata kaslr_status;
u64 __ro_after_init module_alloc_base;
u16 __initdata memstart_offset_seed;
-static __init u64 get_kaslr_seed(void *fdt)
-{
- int node, len;
- fdt64_t *prop;
- u64 ret;
-
- node = fdt_path_offset(fdt, "/chosen");
- if (node < 0)
- return 0;
-
- prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
- if (!prop || len != sizeof(u64))
- return 0;
-
- ret = fdt64_to_cpu(*prop);
- *prop = 0;
- return ret;
-}
-
struct arm64_ftr_override kaslr_feature_override __initdata;
-/*
- * This routine will be executed with the kernel mapped at its default virtual
- * address, and if it returns successfully, the kernel will be remapped, and
- * start_kernel() will be executed from a randomized virtual offset. The
- * relocation will result in all absolute references (e.g., static variables
- * containing function pointers) to be reinitialized, and zero-initialized
- * .bss variables will be reset to 0.
- */
-u64 __init kaslr_early_init(void)
+static int __init kaslr_init(void)
{
- void *fdt;
- u64 seed, offset, mask, module_range;
- unsigned long raw;
+ u64 module_range;
+ u32 seed;
/*
* Set a reasonable default for module_alloc_base in case
* we end up running with module randomization disabled.
*/
module_alloc_base = (u64)_etext - MODULES_VSIZE;
- dcache_clean_inval_poc((unsigned long)&module_alloc_base,
- (unsigned long)&module_alloc_base +
- sizeof(module_alloc_base));
-
- /*
- * Try to map the FDT early. If this fails, we simply bail,
- * and proceed with KASLR disabled. We will make another
- * attempt at mapping the FDT in setup_machine()
- */
- fdt = get_early_fdt_ptr();
- if (!fdt) {
- kaslr_status = KASLR_DISABLED_FDT_REMAP;
- return 0;
- }
- /*
- * Retrieve (and wipe) the seed from the FDT
- */
- seed = get_kaslr_seed(fdt);
-
- /*
- * Check if 'nokaslr' appears on the command line, and
- * return 0 if that is the case.
- */
if (kaslr_feature_override.val & kaslr_feature_override.mask & 0xf) {
- kaslr_status = KASLR_DISABLED_CMDLINE;
+ pr_info("KASLR disabled on command line\n");
return 0;
}
- /*
- * Mix in any entropy obtainable architecturally if enabled
- * and supported.
- */
-
- if (arch_get_random_seed_long_early(&raw))
- seed ^= raw;
-
- if (!seed) {
- kaslr_status = KASLR_DISABLED_NO_SEED;
+ if (!kaslr_offset()) {
+ pr_warn("KASLR disabled due to lack of seed\n");
return 0;
}
+ pr_info("KASLR enabled\n");
+
/*
- * OK, so we are proceeding with KASLR enabled. Calculate a suitable
- * kernel image offset from the seed. Let's place the kernel in the
- * middle half of the VMALLOC area (VA_BITS_MIN - 2), and stay clear of
- * the lower and upper quarters to avoid colliding with other
- * allocations.
- * Even if we could randomize at page granularity for 16k and 64k pages,
- * let's always round to 2 MB so we don't interfere with the ability to
- * map using contiguous PTEs
+ * KASAN without KASAN_VMALLOC does not expect the module region to
+ * intersect the vmalloc region, since shadow memory is allocated for
+ * each module at load time, whereas the vmalloc region will already be
+ * shadowed by KASAN zero pages.
*/
- mask = ((1UL << (VA_BITS_MIN - 2)) - 1) & ~(SZ_2M - 1);
- offset = BIT(VA_BITS_MIN - 3) + (seed & mask);
+ BUILD_BUG_ON((IS_ENABLED(CONFIG_KASAN_GENERIC) ||
+ IS_ENABLED(CONFIG_KASAN_SW_TAGS)) &&
+ !IS_ENABLED(CONFIG_KASAN_VMALLOC));
- /* use the top 16 bits to randomize the linear region */
- memstart_offset_seed = seed >> 48;
-
- if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) &&
- (IS_ENABLED(CONFIG_KASAN_GENERIC) ||
- IS_ENABLED(CONFIG_KASAN_SW_TAGS)))
- /*
- * KASAN without KASAN_VMALLOC does not expect the module region
- * to intersect the vmalloc region, since shadow memory is
- * allocated for each module at load time, whereas the vmalloc
- * region is shadowed by KASAN zero pages. So keep modules
- * out of the vmalloc region if KASAN is enabled without
- * KASAN_VMALLOC, and put the kernel well within 4 GB of the
- * module region.
- */
- return offset % SZ_2G;
+ seed = get_random_u32();
if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
/*
* resolved normally.)
*/
module_range = SZ_2G - (u64)(_end - _stext);
- module_alloc_base = max((u64)_end + offset - SZ_2G,
- (u64)MODULES_VADDR);
+ module_alloc_base = max((u64)_end - SZ_2G, (u64)MODULES_VADDR);
} else {
/*
* Randomize the module region by setting module_alloc_base to
* when ARM64_MODULE_PLTS is enabled.
*/
module_range = MODULES_VSIZE - (u64)(_etext - _stext);
- module_alloc_base = (u64)_etext + offset - MODULES_VSIZE;
}
/* use the lower 21 bits to randomize the base of the module region */
module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
module_alloc_base &= PAGE_MASK;
- dcache_clean_inval_poc((unsigned long)&module_alloc_base,
- (unsigned long)&module_alloc_base +
- sizeof(module_alloc_base));
- dcache_clean_inval_poc((unsigned long)&memstart_offset_seed,
- (unsigned long)&memstart_offset_seed +
- sizeof(memstart_offset_seed));
-
- return offset;
-}
-
-static int __init kaslr_init(void)
-{
- switch (kaslr_status) {
- case KASLR_ENABLED:
- pr_info("KASLR enabled\n");
- break;
- case KASLR_DISABLED_CMDLINE:
- pr_info("KASLR disabled on command line\n");
- break;
- case KASLR_DISABLED_NO_SEED:
- pr_warn("KASLR disabled due to lack of seed\n");
- break;
- case KASLR_DISABLED_FDT_REMAP:
- pr_warn("KASLR disabled due to FDT remapping failure\n");
- break;
- }
-
return 0;
}
-core_initcall(kaslr_init)
+subsys_initcall(kaslr_init)
#include <asm/unistd.h>
+ .section .rodata
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
if (!pte_is_tagged)
return;
- page_kasan_tag_reset(page);
- /*
- * We need smp_wmb() in between setting the flags and clearing the
- * tags because if another thread reads page->flags and builds a
- * tagged address out of it, there is an actual dependency to the
- * memory access, but on the current thread we do not guarantee that
- * the new page->flags are visible before the tags were updated.
- */
- smp_wmb();
mte_clear_page_tags(page_address(page));
}
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2022 Google LLC
+
+KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
+ -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+ $(call cc-option,-mbranch-protection=none) \
+ -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+ -include $(srctree)/include/linux/hidden.h \
+ -D__DISABLE_EXPORTS -ffreestanding -D__NO_FORTIFY \
+ $(call cc-option,-fno-addrsig)
+
+# remove SCS flags from all objects in this directory
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+# disable LTO
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
+
+GCOV_PROFILE := n
+KASAN_SANITIZE := n
+KCSAN_SANITIZE := n
+UBSAN_SANITIZE := n
+KCOV_INSTRUMENT := n
+
+$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \
+ --remove-section=.note.gnu.property \
+ --prefix-alloc-sections=.init
+$(obj)/%.pi.o: $(obj)/%.o FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+ $(call if_changed_rule,cc_o_c)
+
+obj-y := kaslr_early.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o
+extra-y := $(patsubst %.pi.o,%.o,$(obj-y))
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2022 Google LLC
+// Author: Ard Biesheuvel <ardb@google.com>
+
+// NOTE: code in this file runs *very* early, and is not permitted to use
+// global variables or anything that relies on absolute addressing.
+
+#include <linux/libfdt.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+
+#include <asm/archrandom.h>
+#include <asm/memory.h>
+
+/* taken from lib/string.c */
+static char *__strstr(const char *s1, const char *s2)
+{
+ size_t l1, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ l1 = strlen(s1);
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+static bool cmdline_contains_nokaslr(const u8 *cmdline)
+{
+ const u8 *str;
+
+ str = __strstr(cmdline, "nokaslr");
+ return str == cmdline || (str > cmdline && *(str - 1) == ' ');
+}
+
+static bool is_kaslr_disabled_cmdline(void *fdt)
+{
+ if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
+ int node;
+ const u8 *prop;
+
+ node = fdt_path_offset(fdt, "/chosen");
+ if (node < 0)
+ goto out;
+
+ prop = fdt_getprop(fdt, node, "bootargs", NULL);
+ if (!prop)
+ goto out;
+
+ if (cmdline_contains_nokaslr(prop))
+ return true;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ goto out;
+
+ return false;
+ }
+out:
+ return cmdline_contains_nokaslr(CONFIG_CMDLINE);
+}
+
+static u64 get_kaslr_seed(void *fdt)
+{
+ int node, len;
+ fdt64_t *prop;
+ u64 ret;
+
+ node = fdt_path_offset(fdt, "/chosen");
+ if (node < 0)
+ return 0;
+
+ prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
+ if (!prop || len != sizeof(u64))
+ return 0;
+
+ ret = fdt64_to_cpu(*prop);
+ *prop = 0;
+ return ret;
+}
+
+asmlinkage u64 kaslr_early_init(void *fdt)
+{
+ u64 seed;
+
+ if (is_kaslr_disabled_cmdline(fdt))
+ return 0;
+
+ seed = get_kaslr_seed(fdt);
+ if (!seed) {
+#ifdef CONFIG_ARCH_RANDOM
+ if (!__early_cpu_has_rndr() ||
+ !__arm64_rndr((unsigned long *)&seed))
+#endif
+ return 0;
+ }
+
+ /*
+ * OK, so we are proceeding with KASLR enabled. Calculate a suitable
+ * kernel image offset from the seed. Let's place the kernel in the
+ * middle half of the VMALLOC area (VA_BITS_MIN - 2), and stay clear of
+ * the lower and upper quarters to avoid colliding with other
+ * allocations.
+ */
+ return BIT(VA_BITS_MIN - 3) + (seed & GENMASK(VA_BITS_MIN - 3, 0));
+}
vl = task_get_sme_vl(current);
} else {
+ if (!system_supports_sve())
+ return -EINVAL;
+
vl = task_get_sve_vl(current);
}
#else /* ! CONFIG_ARM64_SVE */
-/* Turn any non-optimised out attempts to use these into a link error: */
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+}
+
+/* Turn any non-optimised out attempts to use this into a link error: */
extern int preserve_sve_context(void __user *ctx);
-extern int restore_sve_fpsimd_context(struct user_ctxs *user);
#endif /* ! CONFIG_ARM64_SVE */
if (!user.fpsimd)
return -EINVAL;
- if (user.sve) {
- if (!system_supports_sve())
- return -EINVAL;
-
+ if (user.sve)
err = restore_sve_fpsimd_context(&user);
- } else {
+ else
err = restore_fpsimd_context(user.fpsimd);
- }
}
if (err == 0 && system_supports_sme() && user.za)
#include <asm/unistd.h>
+ .section .rodata
.globl __aarch32_sigret_code_start
__aarch32_sigret_code_start:
.pushsection ".idmap.text", "awx"
SYM_CODE_START(cpu_resume)
bl init_kernel_el
- bl switch_to_vhe
+ bl finalise_el2
bl __cpu_setup
/* enable the MMU early - so we can access sleep_save_stash by va */
adrp x1, swapper_pg_dir
+ adrp x2, idmap_pg_dir
bl __enable_mmu
ldr x8, =_cpu_resume
br x8
* @kr_cur: When KRETPROBES is selected, holds the kretprobe instance
* associated with the most recently encountered replacement lr
* value.
+ *
+ * @task: The task being unwound.
*/
struct unwind_state {
unsigned long fp;
#ifdef CONFIG_KRETPROBES
struct llist_node *kr_cur;
#endif
+ struct task_struct *task;
};
-static notrace void unwind_init(struct unwind_state *state, unsigned long fp,
- unsigned long pc)
+static void unwind_init_common(struct unwind_state *state,
+ struct task_struct *task)
{
- state->fp = fp;
- state->pc = pc;
+ state->task = task;
#ifdef CONFIG_KRETPROBES
state->kr_cur = NULL;
#endif
state->prev_fp = 0;
state->prev_type = STACK_TYPE_UNKNOWN;
}
-NOKPROBE_SYMBOL(unwind_init);
+
+/*
+ * Start an unwind from a pt_regs.
+ *
+ * The unwind will begin at the PC within the regs.
+ *
+ * The regs must be on a stack currently owned by the calling task.
+ */
+static inline void unwind_init_from_regs(struct unwind_state *state,
+ struct pt_regs *regs)
+{
+ unwind_init_common(state, current);
+
+ state->fp = regs->regs[29];
+ state->pc = regs->pc;
+}
+
+/*
+ * Start an unwind from a caller.
+ *
+ * The unwind will begin at the caller of whichever function this is inlined
+ * into.
+ *
+ * The function which invokes this must be noinline.
+ */
+static __always_inline void unwind_init_from_caller(struct unwind_state *state)
+{
+ unwind_init_common(state, current);
+
+ state->fp = (unsigned long)__builtin_frame_address(1);
+ state->pc = (unsigned long)__builtin_return_address(0);
+}
+
+/*
+ * Start an unwind from a blocked task.
+ *
+ * The unwind will begin at the blocked tasks saved PC (i.e. the caller of
+ * cpu_switch_to()).
+ *
+ * The caller should ensure the task is blocked in cpu_switch_to() for the
+ * duration of the unwind, or the unwind will be bogus. It is never valid to
+ * call this for the current task.
+ */
+static inline void unwind_init_from_task(struct unwind_state *state,
+ struct task_struct *task)
+{
+ unwind_init_common(state, task);
+
+ state->fp = thread_saved_fp(task);
+ state->pc = thread_saved_pc(task);
+}
/*
* Unwind from one frame record (A) to the next frame record (B).
* records (e.g. a cycle), determined based on the location and fp value of A
* and the location (but not the fp value) of B.
*/
-static int notrace unwind_next(struct task_struct *tsk,
- struct unwind_state *state)
+static int notrace unwind_next(struct unwind_state *state)
{
+ struct task_struct *tsk = state->task;
unsigned long fp = state->fp;
struct stack_info info;
if (fp <= state->prev_fp)
return -EINVAL;
} else {
- set_bit(state->prev_type, state->stacks_done);
+ __set_bit(state->prev_type, state->stacks_done);
}
/*
* Record this frame record's values and location. The prev_fp and
* prev_type are only meaningful to the next unwind_next() invocation.
*/
- state->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
- state->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
+ state->fp = READ_ONCE(*(unsigned long *)(fp));
+ state->pc = READ_ONCE(*(unsigned long *)(fp + 8));
state->prev_fp = fp;
state->prev_type = info.type;
}
NOKPROBE_SYMBOL(unwind_next);
-static void notrace unwind(struct task_struct *tsk,
- struct unwind_state *state,
+static void notrace unwind(struct unwind_state *state,
stack_trace_consume_fn consume_entry, void *cookie)
{
while (1) {
if (!consume_entry(cookie, state->pc))
break;
- ret = unwind_next(tsk, state);
+ ret = unwind_next(state);
if (ret < 0)
break;
}
{
struct unwind_state state;
- if (regs)
- unwind_init(&state, regs->regs[29], regs->pc);
- else if (task == current)
- unwind_init(&state,
- (unsigned long)__builtin_frame_address(1),
- (unsigned long)__builtin_return_address(0));
- else
- unwind_init(&state, thread_saved_fp(task),
- thread_saved_pc(task));
-
- unwind(task, &state, consume_entry, cookie);
+ if (regs) {
+ if (task != current)
+ return;
+ unwind_init_from_regs(&state, regs);
+ } else if (task == current) {
+ unwind_init_from_caller(&state);
+ } else {
+ unwind_init_from_task(&state, task);
+ }
+
+ unwind(&state, consume_entry, cookie);
}
/* Restore CnP bit in TTBR1_EL1 */
if (system_supports_cnp())
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
/*
* PSTATE was not saved over suspend/resume, re-enable any detected
if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
/* Hide DIC so that we can trap the unnecessary maintenance...*/
- val &= ~BIT(CTR_DIC_SHIFT);
+ val &= ~BIT(CTR_EL0_DIC_SHIFT);
/* ... and fake IminLine to reduce the number of traps. */
- val &= ~CTR_IMINLINE_MASK;
- val |= (PAGE_SHIFT - 2) & CTR_IMINLINE_MASK;
+ val &= ~CTR_EL0_IminLine_MASK;
+ val |= (PAGE_SHIFT - 2) & CTR_EL0_IminLine_MASK;
}
pt_regs_write_reg(regs, rt, val);
# routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so
# preparation in build-time C")).
ldflags-y := -shared -soname=linux-vdso.so.1 --hash-style=sysv \
- -Bsymbolic --build-id=sha1 -n $(btildflags-y) -T
+ -Bsymbolic --build-id=sha1 -n $(btildflags-y)
+
+ifdef CONFIG_LD_ORPHAN_WARN
+ ldflags-y += --orphan-handling=warn
+endif
+
+ldflags-y += -T
ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO
#include <linux/const.h>
#include <asm/page.h>
#include <asm/vdso.h>
+#include <asm-generic/vmlinux.lds.h>
OUTPUT_FORMAT("elf64-littleaarch64", "elf64-bigaarch64", "elf64-littleaarch64")
OUTPUT_ARCH(aarch64)
.dynamic : { *(.dynamic) } :text :dynamic
- .rodata : { *(.rodata*) } :text
+ .rela.dyn : ALIGN(8) { *(.rela .rela*) }
+
+ .rodata : {
+ *(.rodata*)
+ *(.got)
+ *(.got.plt)
+ *(.plt)
+ *(.plt.*)
+ *(.iplt)
+ *(.igot .igot.plt)
+ } :text
_end = .;
PROVIDE(end = .);
+ DWARF_DEBUG
+ ELF_DETAILS
+
/DISCARD/ : {
*(.data .data.* .gnu.linkonce.d.* .sdata*)
*(.bss .sbss .dynbss .dynsbss)
VDSO_LDFLAGS += -Bsymbolic --no-undefined -soname=linux-vdso.so.1
VDSO_LDFLAGS += -z max-page-size=4096 -z common-page-size=4096
VDSO_LDFLAGS += -shared --hash-style=sysv --build-id=sha1
+VDSO_LDFLAGS += --orphan-handling=warn
# Borrow vdsomunge.c from the arm vDSO
#include <linux/const.h>
#include <asm/page.h>
#include <asm/vdso.h>
+#include <asm-generic/vmlinux.lds.h>
OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
OUTPUT_ARCH(arm)
.dynamic : { *(.dynamic) } :text :dynamic
- .rodata : { *(.rodata*) } :text
+ .rodata : {
+ *(.rodata*)
+ *(.got)
+ *(.got.plt)
+ *(.plt)
+ *(.rel.iplt)
+ *(.iplt)
+ *(.igot.plt)
+ } :text
- .text : { *(.text*) } :text =0xe7f001f2
+ .text : {
+ *(.text*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.vfp11_veneer)
+ *(.v4_bx)
+ } :text =0xe7f001f2
- .got : { *(.got) }
- .rel.plt : { *(.rel.plt) }
+ .rel.dyn : { *(.rel*) }
+
+ .ARM.exidx : { *(.ARM.exidx*) }
+ DWARF_DEBUG
+ ELF_DETAILS
+ .ARM.attributes 0 : { *(.ARM.attributes) }
/DISCARD/ : {
*(.note.GNU-stack)
__entry_tramp_text_start = .; \
*(.entry.tramp.text) \
. = ALIGN(PAGE_SIZE); \
- __entry_tramp_text_end = .;
+ __entry_tramp_text_end = .; \
+ *(.entry.tramp.rodata)
#else
#define TRAMP_TEXT
#endif
}
idmap_pg_dir = .;
- . += IDMAP_DIR_SIZE;
- idmap_pg_end = .;
+ . += PAGE_SIZE;
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
tramp_pg_dir = .;
__inittext_end = .;
__initdata_begin = .;
+ init_idmap_pg_dir = .;
+ . += INIT_IDMAP_DIR_SIZE;
+ init_idmap_pg_end = .;
+
.init.data : {
INIT_DATA
INIT_SETUP(16)
HYPERVISOR_RELOC_SECTION
.rela.dyn : ALIGN(8) {
+ __rela_start = .;
*(.rela .rela*)
+ __rela_end = .;
}
- __rela_offset = ABSOLUTE(ADDR(.rela.dyn) - KIMAGE_VADDR);
- __rela_size = SIZEOF(.rela.dyn);
-
-#ifdef CONFIG_RELR
.relr.dyn : ALIGN(8) {
+ __relr_start = .;
*(.relr.dyn)
+ __relr_end = .;
}
- __relr_offset = ABSOLUTE(ADDR(.relr.dyn) - KIMAGE_VADDR);
- __relr_size = SIZEOF(.relr.dyn);
-#endif
-
. = ALIGN(SEGMENT_ALIGN);
__initdata_end = .;
__init_end = .;
)
#define PVM_ID_AA64ISAR1_ALLOW (\
- ARM64_FEATURE_MASK(ID_AA64ISAR1_DPB) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_JSCVT) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_FCMA) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_LRCPC) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_FRINTTS) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_SB) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_SPECRES) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_BF16) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_DGH) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR1_I8MM) \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FRINTTS) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SB) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SPECRES) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_BF16) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DGH) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_I8MM) \
)
#define PVM_ID_AA64ISAR2_ALLOW (\
- ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3) | \
- ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) \
+ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
+ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) \
)
u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id);
u64 allow_mask = PVM_ID_AA64ISAR1_ALLOW;
if (!vcpu_has_ptrauth(vcpu))
- allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_API) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI));
+ allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
return id_aa64isar1_el1_sys_val & allow_mask;
}
u64 allow_mask = PVM_ID_AA64ISAR2_ALLOW;
if (!vcpu_has_ptrauth(vcpu))
- allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) |
- ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3));
+ allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
return id_aa64isar2_el1_sys_val & allow_mask;
}
break;
case SYS_ID_AA64ISAR1_EL1:
if (!vcpu_has_ptrauth(vcpu))
- val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_API) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) |
- ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI));
+ val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
break;
case SYS_ID_AA64ISAR2_EL1:
if (!vcpu_has_ptrauth(vcpu))
- val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) |
- ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3));
+ val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
+ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
if (!cpus_have_final_cap(ARM64_HAS_WFXT))
- val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_WFXT);
+ val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT);
break;
case SYS_ID_AA64DFR0_EL1:
/* Limit debug to ARMv8.0 */
*/
.macro multitag_transfer_size, reg, tmp
mrs_s \reg, SYS_GMID_EL1
- ubfx \reg, \reg, #SYS_GMID_EL1_BS_SHIFT, #SYS_GMID_EL1_BS_SIZE
+ ubfx \reg, \reg, #GMID_EL1_BS_SHIFT, #GMID_EL1_BS_SIZE
mov \tmp, #4
lsl \reg, \tmp, \reg
.endm
ret
SYM_FUNC_END(__pi_dcache_clean_pop)
SYM_FUNC_ALIAS(dcache_clean_pop, __pi_dcache_clean_pop)
-
-/*
- * __dma_flush_area(start, size)
- *
- * clean & invalidate D / U line
- *
- * - start - virtual start address of region
- * - size - size in question
- */
-SYM_FUNC_START(__pi___dma_flush_area)
- add x1, x0, x1
- dcache_by_line_op civac, sy, x0, x1, x2, x3
- ret
-SYM_FUNC_END(__pi___dma_flush_area)
-SYM_FUNC_ALIAS(__dma_flush_area, __pi___dma_flush_area)
-
-/*
- * __dma_map_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-SYM_FUNC_START(__pi___dma_map_area)
- add x1, x0, x1
- b __pi_dcache_clean_poc
-SYM_FUNC_END(__pi___dma_map_area)
-SYM_FUNC_ALIAS(__dma_map_area, __pi___dma_map_area)
-
-/*
- * __dma_unmap_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-SYM_FUNC_START(__pi___dma_unmap_area)
- add x1, x0, x1
- cmp w2, #DMA_TO_DEVICE
- b.ne __pi_dcache_inval_poc
- ret
-SYM_FUNC_END(__pi___dma_unmap_area)
-SYM_FUNC_ALIAS(__dma_unmap_area, __pi___dma_unmap_area)
if (system_supports_mte() && test_bit(PG_mte_tagged, &from->flags)) {
set_bit(PG_mte_tagged, &to->flags);
- page_kasan_tag_reset(to);
- /*
- * We need smp_wmb() in between setting the flags and clearing the
- * tags because if another thread reads page->flags and builds a
- * tagged address out of it, there is an actual dependency to the
- * memory access, but on the current thread we do not guarantee that
- * the new page->flags are visible before the tags were updated.
- */
- smp_wmb();
mte_copy_page_tags(kto, kfrom);
}
}
#include <asm/xen/xen-ops.h>
void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
- enum dma_data_direction dir)
+ enum dma_data_direction dir)
{
- __dma_map_area(phys_to_virt(paddr), size, dir);
+ unsigned long start = (unsigned long)phys_to_virt(paddr);
+
+ dcache_clean_poc(start, start + size);
}
void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
- enum dma_data_direction dir)
+ enum dma_data_direction dir)
{
- __dma_unmap_area(phys_to_virt(paddr), size, dir);
+ unsigned long start = (unsigned long)phys_to_virt(paddr);
+
+ if (dir == DMA_TO_DEVICE)
+ return;
+
+ dcache_inval_poc(start, start + size);
}
void arch_dma_prep_coherent(struct page *page, size_t size)
{
- __dma_flush_area(page_address(page), size);
+ unsigned long start = (unsigned long)page_address(page);
+
+ dcache_clean_inval_poc(start, start + size);
}
#ifdef CONFIG_IOMMU_DMA
return ((unsigned long)&ex->fixup + ex->fixup);
}
-static bool ex_handler_fixup(const struct exception_table_entry *ex,
- struct pt_regs *regs)
-{
- regs->pc = get_ex_fixup(ex);
- return true;
-}
-
static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
struct pt_regs *regs)
{
return false;
switch (ex->type) {
- case EX_TYPE_FIXUP:
- return ex_handler_fixup(ex, regs);
case EX_TYPE_BPF:
return ex_handler_bpf(ex, regs);
case EX_TYPE_UACCESS_ERR_ZERO:
+ case EX_TYPE_KACCESS_ERR_ZERO:
return ex_handler_uaccess_err_zero(ex, regs);
case EX_TYPE_LOAD_UNALIGNED_ZEROPAD:
return ex_handler_load_unaligned_zeropad(ex, regs);
void tag_clear_highpage(struct page *page)
{
mte_zero_clear_page_tags(page_address(page));
- page_kasan_tag_reset(page);
set_bit(PG_mte_tagged, &page->flags);
}
#endif
}
-/*
- * Select all bits except the pfn
- */
-static inline pgprot_t pte_pgprot(pte_t pte)
-{
- unsigned long pfn = pte_pfn(pte);
-
- return __pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^ pte_val(pte));
-}
-
static int find_num_contig(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, size_t *pgsize)
{
early_init_fdt_scan_reserved_mem();
- if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
+ if (!defer_reserve_crashkernel())
reserve_crashkernel();
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
* request_standard_resources() depends on crashkernel's memory being
* reserved, so do it here.
*/
- if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
+ if (defer_reserve_crashkernel())
reserve_crashkernel();
memblock_dump_all();
// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Based on arch/arm/mm/ioremap.c
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- * Hacked for ARM by Phil Blundell <philb@gnu.org>
- * Hacked to allow all architectures to build, and various cleanups
- * by Russell King
- * Copyright (C) 2012 ARM Ltd.
- */
-#include <linux/export.h>
#include <linux/mm.h>
-#include <linux/vmalloc.h>
#include <linux/io.h>
-#include <asm/fixmap.h>
-#include <asm/tlbflush.h>
-
-static void __iomem *__ioremap_caller(phys_addr_t phys_addr, size_t size,
- pgprot_t prot, void *caller)
+bool ioremap_allowed(phys_addr_t phys_addr, size_t size, unsigned long prot)
{
- unsigned long last_addr;
- unsigned long offset = phys_addr & ~PAGE_MASK;
- int err;
- unsigned long addr;
- struct vm_struct *area;
+ unsigned long last_addr = phys_addr + size - 1;
- /*
- * Page align the mapping address and size, taking account of any
- * offset.
- */
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(size + offset);
+ /* Don't allow outside PHYS_MASK */
+ if (last_addr & ~PHYS_MASK)
+ return false;
- /*
- * Don't allow wraparound, zero size or outside PHYS_MASK.
- */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr || (last_addr & ~PHYS_MASK))
- return NULL;
-
- /*
- * Don't allow RAM to be mapped.
- */
+ /* Don't allow RAM to be mapped. */
if (WARN_ON(pfn_is_map_memory(__phys_to_pfn(phys_addr))))
- return NULL;
-
- area = get_vm_area_caller(size, VM_IOREMAP, caller);
- if (!area)
- return NULL;
- addr = (unsigned long)area->addr;
- area->phys_addr = phys_addr;
-
- err = ioremap_page_range(addr, addr + size, phys_addr, prot);
- if (err) {
- vunmap((void *)addr);
- return NULL;
- }
-
- return (void __iomem *)(offset + addr);
-}
-
-void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot)
-{
- return __ioremap_caller(phys_addr, size, prot,
- __builtin_return_address(0));
-}
-EXPORT_SYMBOL(__ioremap);
-
-void iounmap(volatile void __iomem *io_addr)
-{
- unsigned long addr = (unsigned long)io_addr & PAGE_MASK;
-
- /*
- * We could get an address outside vmalloc range in case
- * of ioremap_cache() reusing a RAM mapping.
- */
- if (is_vmalloc_addr((void *)addr))
- vunmap((void *)addr);
-}
-EXPORT_SYMBOL(iounmap);
-
-void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size)
-{
- /* For normal memory we already have a cacheable mapping. */
- if (pfn_is_map_memory(__phys_to_pfn(phys_addr)))
- return (void __iomem *)__phys_to_virt(phys_addr);
+ return false;
- return __ioremap_caller(phys_addr, size, __pgprot(PROT_NORMAL),
- __builtin_return_address(0));
+ return true;
}
-EXPORT_SYMBOL(ioremap_cache);
/*
* Must be called after early_fixmap_init
*/
memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
dsb(ishst);
- cpu_replace_ttbr1(lm_alias(tmp_pg_dir));
+ cpu_replace_ttbr1(lm_alias(tmp_pg_dir), idmap_pg_dir);
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
PAGE_KERNEL_RO));
memset(kasan_early_shadow_page, KASAN_SHADOW_INIT, PAGE_SIZE);
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
}
static void __init kasan_init_depth(void)
#define NO_CONT_MAPPINGS BIT(1)
#define NO_EXEC_MAPPINGS BIT(2) /* assumes FEAT_HPDS is not used */
-u64 idmap_t0sz = TCR_T0SZ(VA_BITS_MIN);
-u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
+int idmap_t0sz __ro_after_init;
-u64 __section(".mmuoff.data.write") vabits_actual;
+#if VA_BITS > 48
+u64 vabits_actual __ro_after_init = VA_BITS_MIN;
EXPORT_SYMBOL(vabits_actual);
+#endif
+
+u64 kimage_vaddr __ro_after_init = (u64)&_text;
+EXPORT_SYMBOL(kimage_vaddr);
u64 kimage_voffset __ro_after_init;
EXPORT_SYMBOL(kimage_voffset);
+u32 __boot_cpu_mode[] = { BOOT_CPU_MODE_EL2, BOOT_CPU_MODE_EL1 };
+
+/*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ */
+long __section(".mmuoff.data.write") __early_cpu_boot_status;
+
/*
* Empty_zero_page is a special page that is used for zero-initialized data
* and COW.
} while (pgdp++, addr = next, addr != end);
}
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+extern __alias(__create_pgd_mapping)
+void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
+ phys_addr_t size, pgprot_t prot,
+ phys_addr_t (*pgtable_alloc)(int), int flags);
+#endif
+
static phys_addr_t __pgd_pgtable_alloc(int shift)
{
void *ptr = (void *)__get_free_page(GFP_PGTABLE_KERNEL);
#ifdef CONFIG_KEXEC_CORE
if (crash_mem_map) {
- if (IS_ENABLED(CONFIG_ZONE_DMA) ||
- IS_ENABLED(CONFIG_ZONE_DMA32))
+ if (defer_reserve_crashkernel())
flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
else if (crashk_res.end)
memblock_mark_nomap(crashk_res.start,
* through /sys/kernel/kexec_crash_size interface.
*/
#ifdef CONFIG_KEXEC_CORE
- if (crash_mem_map &&
- !IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
+ if (crash_mem_map && !defer_reserve_crashkernel()) {
if (crashk_res.end) {
__map_memblock(pgdp, crashk_res.start,
crashk_res.end + 1,
__set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
pa_start + i * PAGE_SIZE, prot);
- if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
- extern char __entry_tramp_data_start[];
-
- __set_fixmap(FIX_ENTRY_TRAMP_DATA,
- __pa_symbol(__entry_tramp_data_start),
- PAGE_KERNEL_RO);
- }
+ if (IS_ENABLED(CONFIG_RELOCATABLE))
+ __set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
+ pa_start + i * PAGE_SIZE, PAGE_KERNEL_RO);
return 0;
}
kasan_copy_shadow(pgdp);
}
+static void __init create_idmap(void)
+{
+ u64 start = __pa_symbol(__idmap_text_start);
+ u64 size = __pa_symbol(__idmap_text_end) - start;
+ pgd_t *pgd = idmap_pg_dir;
+ u64 pgd_phys;
+
+ /* check if we need an additional level of translation */
+ if (VA_BITS < 48 && idmap_t0sz < (64 - VA_BITS_MIN)) {
+ pgd_phys = early_pgtable_alloc(PAGE_SHIFT);
+ set_pgd(&idmap_pg_dir[start >> VA_BITS],
+ __pgd(pgd_phys | P4D_TYPE_TABLE));
+ pgd = __va(pgd_phys);
+ }
+ __create_pgd_mapping(pgd, start, start, size, PAGE_KERNEL_ROX,
+ early_pgtable_alloc, 0);
+
+ if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) {
+ extern u32 __idmap_kpti_flag;
+ u64 pa = __pa_symbol(&__idmap_kpti_flag);
+
+ /*
+ * The KPTI G-to-nG conversion code needs a read-write mapping
+ * of its synchronization flag in the ID map.
+ */
+ __create_pgd_mapping(pgd, pa, pa, sizeof(u32), PAGE_KERNEL,
+ early_pgtable_alloc, 0);
+ }
+}
+
void __init paging_init(void)
{
pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir));
+ extern pgd_t init_idmap_pg_dir[];
+
+ idmap_t0sz = 63UL - __fls(__pa_symbol(_end) | GENMASK(VA_BITS_MIN - 1, 0));
map_kernel(pgdp);
map_mem(pgdp);
pgd_clear_fixmap();
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(lm_alias(swapper_pg_dir), init_idmap_pg_dir);
init_mm.pgd = swapper_pg_dir;
memblock_phys_free(__pa_symbol(init_pg_dir),
__pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir));
memblock_allow_resize();
+
+ create_idmap();
}
/*
if (!tags)
return false;
- page_kasan_tag_reset(page);
- /*
- * We need smp_wmb() in between setting the flags and clearing the
- * tags because if another thread reads page->flags and builds a
- * tagged address out of it, there is an actual dependency to the
- * memory access, but on the current thread we do not guarantee that
- * the new page->flags are visible before the tags were updated.
- */
- smp_wmb();
mte_restore_page_tags(page_address(page), tags);
return true;
#include <asm/asm-offsets.h>
#include <asm/asm_pointer_auth.h>
#include <asm/hwcap.h>
+#include <asm/kernel-pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
.popsection
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+
+#define KPTI_NG_PTE_FLAGS (PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
+
.pushsection ".idmap.text", "awx"
- .macro __idmap_kpti_get_pgtable_ent, type
- dc cvac, cur_\()\type\()p // Ensure any existing dirty
- dmb sy // lines are written back before
- ldr \type, [cur_\()\type\()p] // loading the entry
- tbz \type, #0, skip_\()\type // Skip invalid and
- tbnz \type, #11, skip_\()\type // non-global entries
+ .macro kpti_mk_tbl_ng, type, num_entries
+ add end_\type\()p, cur_\type\()p, #\num_entries * 8
+.Ldo_\type:
+ ldr \type, [cur_\type\()p] // Load the entry
+ tbz \type, #0, .Lnext_\type // Skip invalid and
+ tbnz \type, #11, .Lnext_\type // non-global entries
+ orr \type, \type, #PTE_NG // Same bit for blocks and pages
+ str \type, [cur_\type\()p] // Update the entry
+ .ifnc \type, pte
+ tbnz \type, #1, .Lderef_\type
+ .endif
+.Lnext_\type:
+ add cur_\type\()p, cur_\type\()p, #8
+ cmp cur_\type\()p, end_\type\()p
+ b.ne .Ldo_\type
.endm
- .macro __idmap_kpti_put_pgtable_ent_ng, type
- orr \type, \type, #PTE_NG // Same bit for blocks and pages
- str \type, [cur_\()\type\()p] // Update the entry and ensure
- dmb sy // that it is visible to all
- dc civac, cur_\()\type\()p // CPUs.
+ /*
+ * Dereference the current table entry and map it into the temporary
+ * fixmap slot associated with the current level.
+ */
+ .macro kpti_map_pgtbl, type, level
+ str xzr, [temp_pte, #8 * (\level + 1)] // break before make
+ dsb nshst
+ add pte, temp_pte, #PAGE_SIZE * (\level + 1)
+ lsr pte, pte, #12
+ tlbi vaae1, pte
+ dsb nsh
+ isb
+
+ phys_to_pte pte, cur_\type\()p
+ add cur_\type\()p, temp_pte, #PAGE_SIZE * (\level + 1)
+ orr pte, pte, pte_flags
+ str pte, [temp_pte, #8 * (\level + 1)]
+ dsb nshst
.endm
/*
- * void __kpti_install_ng_mappings(int cpu, int num_cpus, phys_addr_t swapper)
+ * void __kpti_install_ng_mappings(int cpu, int num_secondaries, phys_addr_t temp_pgd,
+ * unsigned long temp_pte_va)
*
* Called exactly once from stop_machine context by each CPU found during boot.
*/
-__idmap_kpti_flag:
- .long 1
+ .pushsection ".data", "aw", %progbits
+SYM_DATA(__idmap_kpti_flag, .long 1)
+ .popsection
+
SYM_FUNC_START(idmap_kpti_install_ng_mappings)
cpu .req w0
+ temp_pte .req x0
num_cpus .req w1
- swapper_pa .req x2
+ pte_flags .req x1
+ temp_pgd_phys .req x2
swapper_ttb .req x3
flag_ptr .req x4
cur_pgdp .req x5
pgd .req x7
cur_pudp .req x8
end_pudp .req x9
- pud .req x10
cur_pmdp .req x11
end_pmdp .req x12
- pmd .req x13
cur_ptep .req x14
end_ptep .req x15
pte .req x16
+ valid .req x17
+ mov x5, x3 // preserve temp_pte arg
mrs swapper_ttb, ttbr1_el1
- restore_ttbr1 swapper_ttb
- adr flag_ptr, __idmap_kpti_flag
+ adr_l flag_ptr, __idmap_kpti_flag
cbnz cpu, __idmap_kpti_secondary
eor w17, w17, num_cpus
cbnz w17, 1b
- /* We need to walk swapper, so turn off the MMU. */
- pre_disable_mmu_workaround
- mrs x17, sctlr_el1
- bic x17, x17, #SCTLR_ELx_M
- msr sctlr_el1, x17
+ /* Switch to the temporary page tables on this CPU only */
+ __idmap_cpu_set_reserved_ttbr1 x8, x9
+ offset_ttbr1 temp_pgd_phys, x8
+ msr ttbr1_el1, temp_pgd_phys
isb
+ mov temp_pte, x5
+ mov pte_flags, #KPTI_NG_PTE_FLAGS
+
/* Everybody is enjoying the idmap, so we can rewrite swapper. */
/* PGD */
- mov cur_pgdp, swapper_pa
- add end_pgdp, cur_pgdp, #(PTRS_PER_PGD * 8)
-do_pgd: __idmap_kpti_get_pgtable_ent pgd
- tbnz pgd, #1, walk_puds
-next_pgd:
- __idmap_kpti_put_pgtable_ent_ng pgd
-skip_pgd:
- add cur_pgdp, cur_pgdp, #8
- cmp cur_pgdp, end_pgdp
- b.ne do_pgd
-
- /* Publish the updated tables and nuke all the TLBs */
- dsb sy
- tlbi vmalle1is
- dsb ish
- isb
+ adrp cur_pgdp, swapper_pg_dir
+ kpti_map_pgtbl pgd, 0
+ kpti_mk_tbl_ng pgd, PTRS_PER_PGD
- /* We're done: fire up the MMU again */
- mrs x17, sctlr_el1
- orr x17, x17, #SCTLR_ELx_M
- set_sctlr_el1 x17
+ /* Ensure all the updated entries are visible to secondary CPUs */
+ dsb ishst
+
+ /* We're done: fire up swapper_pg_dir again */
+ __idmap_cpu_set_reserved_ttbr1 x8, x9
+ msr ttbr1_el1, swapper_ttb
+ isb
/* Set the flag to zero to indicate that we're all done */
str wzr, [flag_ptr]
ret
+.Lderef_pgd:
/* PUD */
-walk_puds:
- .if CONFIG_PGTABLE_LEVELS > 3
+ .if CONFIG_PGTABLE_LEVELS > 3
+ pud .req x10
pte_to_phys cur_pudp, pgd
- add end_pudp, cur_pudp, #(PTRS_PER_PUD * 8)
-do_pud: __idmap_kpti_get_pgtable_ent pud
- tbnz pud, #1, walk_pmds
-next_pud:
- __idmap_kpti_put_pgtable_ent_ng pud
-skip_pud:
- add cur_pudp, cur_pudp, 8
- cmp cur_pudp, end_pudp
- b.ne do_pud
- b next_pgd
- .else /* CONFIG_PGTABLE_LEVELS <= 3 */
- mov pud, pgd
- b walk_pmds
-next_pud:
- b next_pgd
+ kpti_map_pgtbl pud, 1
+ kpti_mk_tbl_ng pud, PTRS_PER_PUD
+ b .Lnext_pgd
+ .else /* CONFIG_PGTABLE_LEVELS <= 3 */
+ pud .req pgd
+ .set .Lnext_pud, .Lnext_pgd
.endif
+.Lderef_pud:
/* PMD */
-walk_pmds:
- .if CONFIG_PGTABLE_LEVELS > 2
+ .if CONFIG_PGTABLE_LEVELS > 2
+ pmd .req x13
pte_to_phys cur_pmdp, pud
- add end_pmdp, cur_pmdp, #(PTRS_PER_PMD * 8)
-do_pmd: __idmap_kpti_get_pgtable_ent pmd
- tbnz pmd, #1, walk_ptes
-next_pmd:
- __idmap_kpti_put_pgtable_ent_ng pmd
-skip_pmd:
- add cur_pmdp, cur_pmdp, #8
- cmp cur_pmdp, end_pmdp
- b.ne do_pmd
- b next_pud
- .else /* CONFIG_PGTABLE_LEVELS <= 2 */
- mov pmd, pud
- b walk_ptes
-next_pmd:
- b next_pud
+ kpti_map_pgtbl pmd, 2
+ kpti_mk_tbl_ng pmd, PTRS_PER_PMD
+ b .Lnext_pud
+ .else /* CONFIG_PGTABLE_LEVELS <= 2 */
+ pmd .req pgd
+ .set .Lnext_pmd, .Lnext_pgd
.endif
+.Lderef_pmd:
/* PTE */
-walk_ptes:
pte_to_phys cur_ptep, pmd
- add end_ptep, cur_ptep, #(PTRS_PER_PTE * 8)
-do_pte: __idmap_kpti_get_pgtable_ent pte
- __idmap_kpti_put_pgtable_ent_ng pte
-skip_pte:
- add cur_ptep, cur_ptep, #8
- cmp cur_ptep, end_ptep
- b.ne do_pte
- b next_pmd
+ kpti_map_pgtbl pte, 3
+ kpti_mk_tbl_ng pte, PTRS_PER_PTE
+ b .Lnext_pmd
.unreq cpu
+ .unreq temp_pte
.unreq num_cpus
- .unreq swapper_pa
+ .unreq pte_flags
+ .unreq temp_pgd_phys
.unreq cur_pgdp
.unreq end_pgdp
.unreq pgd
.unreq cur_ptep
.unreq end_ptep
.unreq pte
+ .unreq valid
/* Secondary CPUs end up here */
__idmap_kpti_secondary:
cbnz w16, 1b
/* All done, act like nothing happened */
- offset_ttbr1 swapper_ttb, x16
msr ttbr1_el1, swapper_ttb
isb
ret
*
* Initialise the processor for turning the MMU on.
*
+ * Input:
+ * x0 - actual number of VA bits (ignored unless VA_BITS > 48)
* Output:
* Return in x0 the value of the SCTLR_EL1 register.
*/
tcr_clear_errata_bits tcr, x9, x5
#ifdef CONFIG_ARM64_VA_BITS_52
- ldr_l x9, vabits_actual
- sub x9, xzr, x9
+ sub x9, xzr, x0
add x9, x9, #64
tcr_set_t1sz tcr, x9
#else
- ldr_l x9, idmap_t0sz
+ idmap_get_t0sz x9
#endif
tcr_set_t0sz tcr, x9
HAS_SB
HAS_STAGE2_FWB
HAS_SYSREG_GIC_CPUIF
+HAS_TIDCP1
HAS_TLB_RANGE
HAS_VIRT_HOST_EXTN
HAS_WFXT
WORKAROUND_1463225
WORKAROUND_1508412
WORKAROUND_1542419
+WORKAROUND_1742098
WORKAROUND_1902691
WORKAROUND_2038923
WORKAROUND_2064142
# skip blank lines and comment lines
/^$/ { next }
-/^#/ { next }
+/^[\t ]*#/ { next }
/^SysregFields/ {
change_block("SysregFields", "None", "SysregFields")
# feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration
# item ACCDATA) though it may be more taseful to do something else.
+Sysreg ID_AA64ZFR0_EL1 3 0 0 4 4
+Res0 63:60
+Enum 59:56 F64MM
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 55:52 F32MM
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Res0 51:48
+Enum 47:44 I8MM
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 43:40 SM4
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Res0 39:36
+Enum 35:32 SHA3
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Res0 31:24
+Enum 23:20 BF16
+ 0b0000 NI
+ 0b0001 IMP
+ 0b0010 EBF16
+EndEnum
+Enum 19:16 BitPerm
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Res0 15:8
+Enum 7:4 AES
+ 0b0000 NI
+ 0b0001 IMP
+ 0b0010 PMULL128
+EndEnum
+Enum 3:0 SVEver
+ 0b0000 IMP
+ 0b0001 SVE2
+EndEnum
+EndSysreg
+
+Sysreg ID_AA64SMFR0_EL1 3 0 0 4 5
+Enum 63 FA64
+ 0b0 NI
+ 0b1 IMP
+EndEnum
+Res0 62:60
+Field 59:56 SMEver
+Enum 55:52 I16I64
+ 0b0000 NI
+ 0b1111 IMP
+EndEnum
+Res0 51:49
+Enum 48 F64F64
+ 0b0 NI
+ 0b1 IMP
+EndEnum
+Res0 47:40
+Enum 39:36 I8I32
+ 0b0000 NI
+ 0b1111 IMP
+EndEnum
+Enum 35 F16F32
+ 0b0 NI
+ 0b1 IMP
+EndEnum
+Enum 34 B16F32
+ 0b0 NI
+ 0b1 IMP
+EndEnum
+Res0 33
+Enum 32 F32F32
+ 0b0 NI
+ 0b1 IMP
+EndEnum
+Res0 31:0
+EndSysreg
+
Sysreg ID_AA64ISAR0_EL1 3 0 0 6 0
Enum 63:60 RNDR
0b0000 NI
Res0 3:0
EndSysreg
+Sysreg ID_AA64ISAR1_EL1 3 0 0 6 1
+Enum 63:60 LS64
+ 0b0000 NI
+ 0b0001 LS64
+ 0b0010 LS64_V
+ 0b0011 LS64_ACCDATA
+EndEnum
+Enum 59:56 XS
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 55:52 I8MM
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 51:48 DGH
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 47:44 BF16
+ 0b0000 NI
+ 0b0001 IMP
+ 0b0010 EBF16
+EndEnum
+Enum 43:40 SPECRES
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 39:36 SB
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 35:32 FRINTTS
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 31:28 GPI
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 27:24 GPA
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 23:20 LRCPC
+ 0b0000 NI
+ 0b0001 IMP
+ 0b0010 LRCPC2
+EndEnum
+Enum 19:16 FCMA
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 15:12 JSCVT
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 11:8 API
+ 0b0000 NI
+ 0b0001 PAuth
+ 0b0010 EPAC
+ 0b0011 PAuth2
+ 0b0100 FPAC
+ 0b0101 FPACCOMBINE
+EndEnum
+Enum 7:4 APA
+ 0b0000 NI
+ 0b0001 PAuth
+ 0b0010 EPAC
+ 0b0011 PAuth2
+ 0b0100 FPAC
+ 0b0101 FPACCOMBINE
+EndEnum
+Enum 3:0 DPB
+ 0b0000 NI
+ 0b0001 IMP
+ 0b0010 DPB2
+EndEnum
+EndSysreg
+
+Sysreg ID_AA64ISAR2_EL1 3 0 0 6 2
+Res0 63:28
+Enum 27:24 PAC_frac
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 23:20 BC
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 19:16 MOPS
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 15:12 APA3
+ 0b0000 NI
+ 0b0001 PAuth
+ 0b0010 EPAC
+ 0b0011 PAuth2
+ 0b0100 FPAC
+ 0b0101 FPACCOMBINE
+EndEnum
+Enum 11:8 GPA3
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 7:4 RPRES
+ 0b0000 NI
+ 0b0001 IMP
+EndEnum
+Enum 3:0 WFxT
+ 0b0000 NI
+ 0b0010 IMP
+EndEnum
+EndSysreg
+
Sysreg SCTLR_EL1 3 0 1 0 0
Field 63 TIDCP
Field 62 SPINMASK
Field 2:0 Ctype1
EndSysreg
+Sysreg GMID_EL1 3 1 0 0 4
+Res0 63:4
+Field 3:0 BS
+EndSysreg
+
Sysreg SMIDR_EL1 3 1 0 0 6
Res0 63:32
Field 31:24 IMPLEMENTER
Field 0 InD
EndSysreg
+Sysreg CTR_EL0 3 3 0 0 1
+Res0 63:38
+Field 37:32 TminLine
+Res1 31
+Res0 30
+Field 29 DIC
+Field 28 IDC
+Field 27:24 CWG
+Field 23:20 ERG
+Field 19:16 DminLine
+Enum 15:14 L1Ip
+ 0b00 VPIPT
+ # This is named as AIVIVT in the ARM but documented as reserved
+ 0b01 RESERVED
+ 0b10 VIPT
+ 0b11 PIPT
+EndEnum
+Res0 13:4
+Field 3:0 IminLine
+EndSysreg
+
+Sysreg DCZID_EL0 3 3 0 0 7
+Res0 63:5
+Field 4 DZP
+Field 3:0 BS
+EndSysreg
+
Sysreg SVCR 3 3 4 2 2
Res0 63:2
Field 1 ZA
Sysreg TTBR1_EL1 3 0 2 0 1
Fields TTBRx_EL1
EndSysreg
+
+Sysreg LORSA_EL1 3 0 10 4 0
+Res0 63:52
+Field 51:16 SA
+Res0 15:1
+Field 0 Valid
+EndSysreg
+
+Sysreg LOREA_EL1 3 0 10 4 1
+Res0 63:52
+Field 51:48 EA_51_48
+Field 47:16 EA_47_16
+Res0 15:0
+EndSysreg
+
+Sysreg LORN_EL1 3 0 10 4 2
+Res0 63:8
+Field 7:0 Num
+EndSysreg
+
+Sysreg LORC_EL1 3 0 10 4 3
+Res0 63:10
+Field 9:2 DS
+Res0 1
+Field 0 EN
+EndSysreg
+
+Sysreg LORID_EL1 3 0 10 4 7
+Res0 63:24
+Field 23:16 LD
+Res0 15:8
+Field 7:0 LR
+EndSysreg
if (iosapic_intr_info[irq].count == 0) {
#ifdef CONFIG_SMP
/* Clear affinity */
- cpumask_setall(irq_get_affinity_mask(irq));
+ irq_data_update_affinity(irq_get_irq_data(irq), cpu_all_mask);
#endif
/* Clear the interrupt information */
iosapic_intr_info[irq].dest = 0;
void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
{
if (irq < NR_IRQS) {
- cpumask_copy(irq_get_affinity_mask(irq),
- cpumask_of(cpu_logical_id(hwid)));
+ irq_data_update_affinity(irq_get_irq_data(irq),
+ cpumask_of(cpu_logical_id(hwid)));
irq_redir[irq] = (char) (redir & 0xff);
}
}
msg.data = data;
pci_write_msi_msg(irq, &msg);
- cpumask_copy(irq_data_get_affinity_mask(idata), cpumask_of(cpu));
+ irq_data_update_affinity(idata, cpumask_of(cpu));
return 0;
}
msg.address_lo |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
dmar_msi_write(irq, &msg);
- cpumask_copy(irq_data_get_affinity_mask(data), mask);
+ irq_data_update_affinity(data, mask);
return 0;
}
config LOONGARCH
bool
default y
+ select ACPI_GENERIC_GSI if ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_BINFMT_ELF_STATE
select ARCH_ENABLE_MEMORY_HOTPLUG
select GENERIC_TIME_VSYSCALL
select GPIOLIB
select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_COMPILER_H
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
extern struct list_head acpi_wakeup_device_list;
+/*
+ * Temporary definitions until the core ACPICA code gets updated (see
+ * 1656837932-18257-1-git-send-email-lvjianmin@loongson.cn and its
+ * follow-ups for the "rationale").
+ *
+ * Once the "legal reasons" are cleared and that the code is merged,
+ * this can be dropped entierely.
+ */
+#if (ACPI_CA_VERSION == 0x20220331 && !defined(LOONGARCH_ACPICA_EXT))
+
+#define LOONGARCH_ACPICA_EXT 1
+
+#define ACPI_MADT_TYPE_CORE_PIC 17
+#define ACPI_MADT_TYPE_LIO_PIC 18
+#define ACPI_MADT_TYPE_HT_PIC 19
+#define ACPI_MADT_TYPE_EIO_PIC 20
+#define ACPI_MADT_TYPE_MSI_PIC 21
+#define ACPI_MADT_TYPE_BIO_PIC 22
+#define ACPI_MADT_TYPE_LPC_PIC 23
+
+/* Values for Version field above */
+
+enum acpi_madt_core_pic_version {
+ ACPI_MADT_CORE_PIC_VERSION_NONE = 0,
+ ACPI_MADT_CORE_PIC_VERSION_V1 = 1,
+ ACPI_MADT_CORE_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_lio_pic_version {
+ ACPI_MADT_LIO_PIC_VERSION_NONE = 0,
+ ACPI_MADT_LIO_PIC_VERSION_V1 = 1,
+ ACPI_MADT_LIO_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_eio_pic_version {
+ ACPI_MADT_EIO_PIC_VERSION_NONE = 0,
+ ACPI_MADT_EIO_PIC_VERSION_V1 = 1,
+ ACPI_MADT_EIO_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_ht_pic_version {
+ ACPI_MADT_HT_PIC_VERSION_NONE = 0,
+ ACPI_MADT_HT_PIC_VERSION_V1 = 1,
+ ACPI_MADT_HT_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_bio_pic_version {
+ ACPI_MADT_BIO_PIC_VERSION_NONE = 0,
+ ACPI_MADT_BIO_PIC_VERSION_V1 = 1,
+ ACPI_MADT_BIO_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_msi_pic_version {
+ ACPI_MADT_MSI_PIC_VERSION_NONE = 0,
+ ACPI_MADT_MSI_PIC_VERSION_V1 = 1,
+ ACPI_MADT_MSI_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+enum acpi_madt_lpc_pic_version {
+ ACPI_MADT_LPC_PIC_VERSION_NONE = 0,
+ ACPI_MADT_LPC_PIC_VERSION_V1 = 1,
+ ACPI_MADT_LPC_PIC_VERSION_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+#pragma pack(1)
+
+/* Core Interrupt Controller */
+
+struct acpi_madt_core_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u32 processor_id;
+ u32 core_id;
+ u32 flags;
+};
+
+/* Legacy I/O Interrupt Controller */
+
+struct acpi_madt_lio_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u64 address;
+ u16 size;
+ u8 cascade[2];
+ u32 cascade_map[2];
+};
+
+/* Extend I/O Interrupt Controller */
+
+struct acpi_madt_eio_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u8 cascade;
+ u8 node;
+ u64 node_map;
+};
+
+/* HT Interrupt Controller */
+
+struct acpi_madt_ht_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u64 address;
+ u16 size;
+ u8 cascade[8];
+};
+
+/* Bridge I/O Interrupt Controller */
+
+struct acpi_madt_bio_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u64 address;
+ u16 size;
+ u16 id;
+ u16 gsi_base;
+};
+
+/* MSI Interrupt Controller */
+
+struct acpi_madt_msi_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u64 msg_address;
+ u32 start;
+ u32 count;
+};
+
+/* LPC Interrupt Controller */
+
+struct acpi_madt_lpc_pic {
+ struct acpi_subtable_header header;
+ u8 version;
+ u64 address;
+ u16 size;
+ u8 cascade;
+};
+
+#pragma pack()
+
+#endif
+
#endif /* !CONFIG_ACPI */
#define ACPI_TABLE_UPGRADE_MAX_PHYS ARCH_LOW_ADDRESS_LIMIT
nor \dst, \src, zero
.endm
-.macro bgt r0 r1 label
- blt \r1, \r0, \label
-.endm
-
-.macro bltz r0 label
- blt \r0, zero, \label
-.endm
-
-.macro bgez r0 label
- bge \r0, zero, \label
-.endm
-
#endif /* _ASM_ASMMACRO_H */
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/cmpxchg.h>
-#include <asm/compiler.h>
#if __SIZEOF_LONG__ == 4
#define __LL "ll.w "
__asm__ __volatile__(
"1: ll.w %1, %2 # atomic_sub_if_positive\n"
" addi.w %0, %1, %3 \n"
- " or %1, %0, $zero \n"
- " blt %0, $zero, 2f \n"
+ " move %1, %0 \n"
+ " bltz %0, 2f \n"
" sc.w %1, %2 \n"
- " beq $zero, %1, 1b \n"
+ " beqz %1, 1b \n"
"2: \n"
__WEAK_LLSC_MB
- : "=&r" (result), "=&r" (temp),
- "+" GCC_OFF_SMALL_ASM() (v->counter)
+ : "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
: "I" (-i));
} else {
__asm__ __volatile__(
"1: ll.w %1, %2 # atomic_sub_if_positive\n"
" sub.w %0, %1, %3 \n"
- " or %1, %0, $zero \n"
- " blt %0, $zero, 2f \n"
+ " move %1, %0 \n"
+ " bltz %0, 2f \n"
" sc.w %1, %2 \n"
- " beq $zero, %1, 1b \n"
+ " beqz %1, 1b \n"
"2: \n"
__WEAK_LLSC_MB
- : "=&r" (result), "=&r" (temp),
- "+" GCC_OFF_SMALL_ASM() (v->counter)
+ : "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
: "r" (i));
}
__asm__ __volatile__(
"1: ll.d %1, %2 # atomic64_sub_if_positive \n"
" addi.d %0, %1, %3 \n"
- " or %1, %0, $zero \n"
- " blt %0, $zero, 2f \n"
+ " move %1, %0 \n"
+ " bltz %0, 2f \n"
" sc.d %1, %2 \n"
- " beq %1, $zero, 1b \n"
+ " beqz %1, 1b \n"
"2: \n"
__WEAK_LLSC_MB
- : "=&r" (result), "=&r" (temp),
- "+" GCC_OFF_SMALL_ASM() (v->counter)
+ : "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
: "I" (-i));
} else {
__asm__ __volatile__(
"1: ll.d %1, %2 # atomic64_sub_if_positive \n"
" sub.d %0, %1, %3 \n"
- " or %1, %0, $zero \n"
- " blt %0, $zero, 2f \n"
+ " move %1, %0 \n"
+ " bltz %0, 2f \n"
" sc.d %1, %2 \n"
- " beq %1, $zero, 1b \n"
+ " beqz %1, 1b \n"
"2: \n"
__WEAK_LLSC_MB
- : "=&r" (result), "=&r" (temp),
- "+" GCC_OFF_SMALL_ASM() (v->counter)
+ : "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
: "r" (i));
}
__asm__ __volatile__(
"sltu %0, %1, %2\n\t"
#if (__SIZEOF_LONG__ == 4)
- "sub.w %0, $r0, %0\n\t"
+ "sub.w %0, $zero, %0\n\t"
#elif (__SIZEOF_LONG__ == 8)
- "sub.d %0, $r0, %0\n\t"
+ "sub.d %0, $zero, %0\n\t"
#endif
: "=r" (mask)
: "r" (index), "r" (size)
__asm__ __volatile__( \
"1: " ld " %0, %2 # __cmpxchg_asm \n" \
" bne %0, %z3, 2f \n" \
- " or $t0, %z4, $zero \n" \
+ " move $t0, %z4 \n" \
" " st " $t0, %1 \n" \
- " beq $zero, $t0, 1b \n" \
+ " beqz $t0, 1b \n" \
"2: \n" \
__WEAK_LLSC_MB \
: "=&r" (__ret), "=ZB"(*m) \
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
- */
-#ifndef _ASM_COMPILER_H
-#define _ASM_COMPILER_H
-
-#define GCC_OFF_SMALL_ASM() "ZC"
-
-#define LOONGARCH_ISA_LEVEL "loongarch"
-#define LOONGARCH_ISA_ARCH_LEVEL "arch=loongarch"
-#define LOONGARCH_ISA_LEVEL_RAW loongarch
-#define LOONGARCH_ISA_ARCH_LEVEL_RAW LOONGARCH_ISA_LEVEL_RAW
-
-#endif /* _ASM_COMPILER_H */
.interp_fp_abi = LOONGARCH_ABI_FP_ANY, \
}
-#define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT)
-
extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
bool is_interp, struct arch_elf_state *state);
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <asm/barrier.h>
-#include <asm/compiler.h>
#include <asm/errno.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
"1: ll.w %1, %4 # __futex_atomic_op\n" \
" " insn " \n" \
"2: sc.w $t0, %2 \n" \
- " beq $t0, $zero, 1b \n" \
+ " beqz $t0, 1b \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
"4: li.w %0, %6 \n" \
"# futex_atomic_cmpxchg_inatomic \n"
"1: ll.w %1, %3 \n"
" bne %1, %z4, 3f \n"
- " or $t0, %z5, $zero \n"
+ " move $t0, %z5 \n"
"2: sc.w $t0, %2 \n"
- " beq $zero, $t0, 1b \n"
+ " beqz $t0, 1b \n"
"3: \n"
__WEAK_LLSC_MB
" .section .fixup,\"ax\" \n"
" "__UA_ADDR "\t1b, 4b \n"
" "__UA_ADDR "\t2b, 4b \n"
" .previous \n"
- : "+r" (ret), "=&r" (val), "=" GCC_OFF_SMALL_ASM() (*uaddr)
- : GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
+ : "+r" (ret), "=&r" (val), "=ZC" (*uaddr)
+ : "ZC" (*uaddr), "Jr" (oldval), "Jr" (newval),
"i" (-EFAULT)
: "memory", "t0");
return (low <= sp && sp <= high);
}
-int get_ipi_irq(void);
-int get_pmc_irq(void);
-int get_timer_irq(void);
void spurious_interrupt(void);
#define NR_IRQS_LEGACY 16
#define MAX_IO_PICS 2
#define NR_IRQS (64 + (256 * MAX_IO_PICS))
+struct acpi_vector_group {
+ int node;
+ int pci_segment;
+ struct irq_domain *parent;
+};
+extern struct acpi_vector_group pch_group[MAX_IO_PICS];
+extern struct acpi_vector_group msi_group[MAX_IO_PICS];
+
#define CORES_PER_EIO_NODE 4
#define LOONGSON_CPU_UART0_VEC 10 /* CPU UART0 */
extern int find_pch_pic(u32 gsi);
extern int eiointc_get_node(int id);
-static inline void eiointc_enable(void)
-{
- uint64_t misc;
-
- misc = iocsr_read64(LOONGARCH_IOCSR_MISC_FUNC);
- misc |= IOCSR_MISC_FUNC_EXT_IOI_EN;
- iocsr_write64(misc, LOONGARCH_IOCSR_MISC_FUNC);
-}
-
struct acpi_madt_lio_pic;
struct acpi_madt_eio_pic;
struct acpi_madt_ht_pic;
struct acpi_madt_msi_pic;
struct acpi_madt_lpc_pic;
-struct irq_domain *loongarch_cpu_irq_init(void);
-
-struct irq_domain *liointc_acpi_init(struct irq_domain *parent,
+int liointc_acpi_init(struct irq_domain *parent,
struct acpi_madt_lio_pic *acpi_liointc);
-struct irq_domain *eiointc_acpi_init(struct irq_domain *parent,
+int eiointc_acpi_init(struct irq_domain *parent,
struct acpi_madt_eio_pic *acpi_eiointc);
struct irq_domain *htvec_acpi_init(struct irq_domain *parent,
struct acpi_madt_ht_pic *acpi_htvec);
-struct irq_domain *pch_lpc_acpi_init(struct irq_domain *parent,
+int pch_lpc_acpi_init(struct irq_domain *parent,
struct acpi_madt_lpc_pic *acpi_pchlpc);
-struct irq_domain *pch_msi_acpi_init(struct irq_domain *parent,
+#if IS_ENABLED(CONFIG_LOONGSON_PCH_MSI)
+int pch_msi_acpi_init(struct irq_domain *parent,
struct acpi_madt_msi_pic *acpi_pchmsi);
-struct irq_domain *pch_pic_acpi_init(struct irq_domain *parent,
+#else
+static inline int pch_msi_acpi_init(struct irq_domain *parent,
+ struct acpi_madt_msi_pic *acpi_pchmsi)
+{
+ return 0;
+}
+#endif
+int pch_pic_acpi_init(struct irq_domain *parent,
struct acpi_madt_bio_pic *acpi_pchpic);
+int find_pch_pic(u32 gsi);
+struct fwnode_handle *get_pch_msi_handle(int pci_segment);
extern struct acpi_madt_lio_pic *acpi_liointc;
extern struct acpi_madt_eio_pic *acpi_eiointc[MAX_IO_PICS];
extern struct acpi_madt_msi_pic *acpi_pchmsi[MAX_IO_PICS];
extern struct acpi_madt_bio_pic *acpi_pchpic[MAX_IO_PICS];
-extern struct irq_domain *cpu_domain;
-extern struct irq_domain *liointc_domain;
-extern struct irq_domain *pch_lpc_domain;
-extern struct irq_domain *pch_msi_domain[MAX_IO_PICS];
-extern struct irq_domain *pch_pic_domain[MAX_IO_PICS];
+extern struct fwnode_handle *cpuintc_handle;
+extern struct fwnode_handle *liointc_handle;
+extern struct fwnode_handle *pch_lpc_handle;
+extern struct fwnode_handle *pch_pic_handle[MAX_IO_PICS];
extern irqreturn_t loongson3_ipi_interrupt(int irq, void *dev);
#include <linux/compiler.h>
#include <linux/stringify.h>
-#include <asm/compiler.h>
#include <asm/loongarch.h>
static inline void arch_local_irq_enable(void)
#include <linux/bitops.h>
#include <linux/atomic.h>
#include <asm/cmpxchg.h>
-#include <asm/compiler.h>
typedef struct {
atomic_long_t a;
#define MAX_PACKAGES 16
-/* Chip Config register of each physical cpu package */
-extern u64 loongson_chipcfg[MAX_PACKAGES];
-#define LOONGSON_CHIPCFG(id) (*(volatile u32 *)(loongson_chipcfg[id]))
-
-/* Chip Temperature register of each physical cpu package */
-extern u64 loongson_chiptemp[MAX_PACKAGES];
-#define LOONGSON_CHIPTEMP(id) (*(volatile u32 *)(loongson_chiptemp[id]))
-
-/* Freq Control register of each physical cpu package */
-extern u64 loongson_freqctrl[MAX_PACKAGES];
-#define LOONGSON_FREQCTRL(id) (*(volatile u32 *)(loongson_freqctrl[id]))
-
#define xconf_readl(addr) readl(addr)
#define xconf_readq(addr) readq(addr)
{
asm volatile (
" st.w %[v], %[hw], 0 \n"
- " ld.b $r0, %[hw], 0 \n"
+ " ld.b $zero, %[hw], 0 \n"
:
: [hw] "r" (addr), [v] "r" (val)
);
{
asm volatile (
" st.d %[v], %[hw], 0 \n"
- " ld.b $r0, %[hw], 0 \n"
+ " ld.b $zero, %[hw], 0 \n"
:
: [hw] "r" (addr), [v] "r" (val64)
);
static __always_inline void prepare_frametrace(struct pt_regs *regs)
{
__asm__ __volatile__(
- /* Save $r1 */
+ /* Save $ra */
STORE_ONE_REG(1)
- /* Use $r1 to save PC */
- "pcaddi $r1, 0\n\t"
- STR_LONG_S " $r1, %0\n\t"
- /* Restore $r1 */
- STR_LONG_L " $r1, %1, "STR_LONGSIZE"\n\t"
+ /* Use $ra to save PC */
+ "pcaddi $ra, 0\n\t"
+ STR_LONG_S " $ra, %0\n\t"
+ /* Restore $ra */
+ STR_LONG_L " $ra, %1, "STR_LONGSIZE"\n\t"
STORE_ONE_REG(2)
STORE_ONE_REG(3)
STORE_ONE_REG(4)
}
/* How to get the thread information struct from C. */
-register struct thread_info *__current_thread_info __asm__("$r2");
+register struct thread_info *__current_thread_info __asm__("$tp");
static inline struct thread_info *current_thread_info(void)
{
return __current_thread_info;
}
-register unsigned long current_stack_pointer __asm__("$r3");
+register unsigned long current_stack_pointer __asm__("$sp");
#endif /* !__ASSEMBLY__ */
"2: \n" \
" .section .fixup,\"ax\" \n" \
"3: li.w %0, %3 \n" \
- " or %1, $r0, $r0 \n" \
+ " move %1, $zero \n" \
" b 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
int acpi_strict = 1; /* We have no workarounds on LoongArch */
int num_processors;
int disabled_cpus;
-enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
u64 acpi_saved_sp;
#define PREFIX "ACPI: "
-int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
-{
- if (irqp != NULL)
- *irqp = acpi_register_gsi(NULL, gsi, -1, -1);
- return (*irqp >= 0) ? 0 : -EINVAL;
-}
-EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
-
-int acpi_isa_irq_to_gsi(unsigned int isa_irq, u32 *gsi)
-{
- if (gsi)
- *gsi = isa_irq;
- return 0;
-}
-
-/*
- * success: return IRQ number (>=0)
- * failure: return < 0
- */
-int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
-{
- struct irq_fwspec fwspec;
-
- switch (gsi) {
- case GSI_MIN_CPU_IRQ ... GSI_MAX_CPU_IRQ:
- fwspec.fwnode = liointc_domain->fwnode;
- fwspec.param[0] = gsi - GSI_MIN_CPU_IRQ;
- fwspec.param_count = 1;
-
- return irq_create_fwspec_mapping(&fwspec);
-
- case GSI_MIN_LPC_IRQ ... GSI_MAX_LPC_IRQ:
- if (!pch_lpc_domain)
- return -EINVAL;
-
- fwspec.fwnode = pch_lpc_domain->fwnode;
- fwspec.param[0] = gsi - GSI_MIN_LPC_IRQ;
- fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
- fwspec.param_count = 2;
-
- return irq_create_fwspec_mapping(&fwspec);
-
- case GSI_MIN_PCH_IRQ ... GSI_MAX_PCH_IRQ:
- if (!pch_pic_domain[0])
- return -EINVAL;
-
- fwspec.fwnode = pch_pic_domain[0]->fwnode;
- fwspec.param[0] = gsi - GSI_MIN_PCH_IRQ;
- fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
- fwspec.param_count = 2;
-
- return irq_create_fwspec_mapping(&fwspec);
- }
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(acpi_register_gsi);
-
-void acpi_unregister_gsi(u32 gsi)
-{
-
-}
-EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
-
void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size)
{
*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
-#include <asm/cpu-info.h>
#include <linux/cacheinfo.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu-info.h>
/* Populates leaf and increments to next leaf */
#define populate_cache(cache, leaf, c_level, c_type) \
leaf->ways_of_associativity = c->cache.ways; \
leaf->size = c->cache.linesz * c->cache.sets * \
c->cache.ways; \
+ if (leaf->level > 2) \
+ leaf->size *= nodes_per_package; \
leaf++; \
} while (0)
int populate_cache_leaves(unsigned int cpu)
{
- int level = 1;
+ int level = 1, nodes_per_package = 1;
struct cpuinfo_loongarch *c = ¤t_cpu_data;
struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+ if (loongson_sysconf.nr_nodes > 1)
+ nodes_per_package = loongson_sysconf.cores_per_package
+ / loongson_sysconf.cores_per_node;
+
if (c->icache.waysize) {
populate_cache(dcache, this_leaf, level, CACHE_TYPE_DATA);
populate_cache(icache, this_leaf, level++, CACHE_TYPE_INST);
addi.d sp, sp, -PT_SIZE
cfi_st t2, PT_R3
- cfi_rel_offset sp, PT_R3
+ cfi_rel_offset sp, PT_R3
st.d zero, sp, PT_R0
csrrd t2, LOONGARCH_CSR_PRMD
st.d t2, sp, PT_PRMD
cfi_st a7, PT_R11
csrrd ra, LOONGARCH_CSR_ERA
st.d ra, sp, PT_ERA
- cfi_rel_offset ra, PT_ERA
+ cfi_rel_offset ra, PT_ERA
cfi_st tp, PT_R2
cfi_st u0, PT_R21
struct loongson_system_configuration loongson_sysconf;
EXPORT_SYMBOL(loongson_sysconf);
-u64 loongson_chipcfg[MAX_PACKAGES];
-u64 loongson_chiptemp[MAX_PACKAGES];
-u64 loongson_freqctrl[MAX_PACKAGES];
-unsigned long long smp_group[MAX_PACKAGES];
-
-static void __init register_addrs_set(u64 *registers, const u64 addr, int num)
-{
- u64 i;
-
- for (i = 0; i < num; i++) {
- *registers = (i << 44) | addr;
- registers++;
- }
-}
-
void __init init_environ(void)
{
int efi_boot = fw_arg0;
efi_memmap_init_early(&data);
memblock_reserve(data.phys_map & PAGE_MASK,
PAGE_ALIGN(data.size + (data.phys_map & ~PAGE_MASK)));
-
- register_addrs_set(smp_group, TO_UNCACHE(0x1fe01000), 16);
- register_addrs_set(loongson_chipcfg, TO_UNCACHE(0x1fe00180), 16);
- register_addrs_set(loongson_chiptemp, TO_UNCACHE(0x1fe0019c), 16);
- register_addrs_set(loongson_freqctrl, TO_UNCACHE(0x1fe001d0), 16);
}
static int __init init_cpu_fullname(void)
.endm
.macro sc_save_fp base
- EX fst.d $f0, \base, (0 * FPU_REG_WIDTH)
- EX fst.d $f1, \base, (1 * FPU_REG_WIDTH)
- EX fst.d $f2, \base, (2 * FPU_REG_WIDTH)
- EX fst.d $f3, \base, (3 * FPU_REG_WIDTH)
- EX fst.d $f4, \base, (4 * FPU_REG_WIDTH)
- EX fst.d $f5, \base, (5 * FPU_REG_WIDTH)
- EX fst.d $f6, \base, (6 * FPU_REG_WIDTH)
- EX fst.d $f7, \base, (7 * FPU_REG_WIDTH)
- EX fst.d $f8, \base, (8 * FPU_REG_WIDTH)
- EX fst.d $f9, \base, (9 * FPU_REG_WIDTH)
- EX fst.d $f10, \base, (10 * FPU_REG_WIDTH)
- EX fst.d $f11, \base, (11 * FPU_REG_WIDTH)
- EX fst.d $f12, \base, (12 * FPU_REG_WIDTH)
- EX fst.d $f13, \base, (13 * FPU_REG_WIDTH)
- EX fst.d $f14, \base, (14 * FPU_REG_WIDTH)
- EX fst.d $f15, \base, (15 * FPU_REG_WIDTH)
- EX fst.d $f16, \base, (16 * FPU_REG_WIDTH)
- EX fst.d $f17, \base, (17 * FPU_REG_WIDTH)
- EX fst.d $f18, \base, (18 * FPU_REG_WIDTH)
- EX fst.d $f19, \base, (19 * FPU_REG_WIDTH)
- EX fst.d $f20, \base, (20 * FPU_REG_WIDTH)
- EX fst.d $f21, \base, (21 * FPU_REG_WIDTH)
- EX fst.d $f22, \base, (22 * FPU_REG_WIDTH)
- EX fst.d $f23, \base, (23 * FPU_REG_WIDTH)
- EX fst.d $f24, \base, (24 * FPU_REG_WIDTH)
- EX fst.d $f25, \base, (25 * FPU_REG_WIDTH)
- EX fst.d $f26, \base, (26 * FPU_REG_WIDTH)
- EX fst.d $f27, \base, (27 * FPU_REG_WIDTH)
- EX fst.d $f28, \base, (28 * FPU_REG_WIDTH)
- EX fst.d $f29, \base, (29 * FPU_REG_WIDTH)
- EX fst.d $f30, \base, (30 * FPU_REG_WIDTH)
- EX fst.d $f31, \base, (31 * FPU_REG_WIDTH)
+ EX fst.d $f0, \base, (0 * FPU_REG_WIDTH)
+ EX fst.d $f1, \base, (1 * FPU_REG_WIDTH)
+ EX fst.d $f2, \base, (2 * FPU_REG_WIDTH)
+ EX fst.d $f3, \base, (3 * FPU_REG_WIDTH)
+ EX fst.d $f4, \base, (4 * FPU_REG_WIDTH)
+ EX fst.d $f5, \base, (5 * FPU_REG_WIDTH)
+ EX fst.d $f6, \base, (6 * FPU_REG_WIDTH)
+ EX fst.d $f7, \base, (7 * FPU_REG_WIDTH)
+ EX fst.d $f8, \base, (8 * FPU_REG_WIDTH)
+ EX fst.d $f9, \base, (9 * FPU_REG_WIDTH)
+ EX fst.d $f10, \base, (10 * FPU_REG_WIDTH)
+ EX fst.d $f11, \base, (11 * FPU_REG_WIDTH)
+ EX fst.d $f12, \base, (12 * FPU_REG_WIDTH)
+ EX fst.d $f13, \base, (13 * FPU_REG_WIDTH)
+ EX fst.d $f14, \base, (14 * FPU_REG_WIDTH)
+ EX fst.d $f15, \base, (15 * FPU_REG_WIDTH)
+ EX fst.d $f16, \base, (16 * FPU_REG_WIDTH)
+ EX fst.d $f17, \base, (17 * FPU_REG_WIDTH)
+ EX fst.d $f18, \base, (18 * FPU_REG_WIDTH)
+ EX fst.d $f19, \base, (19 * FPU_REG_WIDTH)
+ EX fst.d $f20, \base, (20 * FPU_REG_WIDTH)
+ EX fst.d $f21, \base, (21 * FPU_REG_WIDTH)
+ EX fst.d $f22, \base, (22 * FPU_REG_WIDTH)
+ EX fst.d $f23, \base, (23 * FPU_REG_WIDTH)
+ EX fst.d $f24, \base, (24 * FPU_REG_WIDTH)
+ EX fst.d $f25, \base, (25 * FPU_REG_WIDTH)
+ EX fst.d $f26, \base, (26 * FPU_REG_WIDTH)
+ EX fst.d $f27, \base, (27 * FPU_REG_WIDTH)
+ EX fst.d $f28, \base, (28 * FPU_REG_WIDTH)
+ EX fst.d $f29, \base, (29 * FPU_REG_WIDTH)
+ EX fst.d $f30, \base, (30 * FPU_REG_WIDTH)
+ EX fst.d $f31, \base, (31 * FPU_REG_WIDTH)
.endm
.macro sc_restore_fp base
- EX fld.d $f0, \base, (0 * FPU_REG_WIDTH)
- EX fld.d $f1, \base, (1 * FPU_REG_WIDTH)
- EX fld.d $f2, \base, (2 * FPU_REG_WIDTH)
- EX fld.d $f3, \base, (3 * FPU_REG_WIDTH)
- EX fld.d $f4, \base, (4 * FPU_REG_WIDTH)
- EX fld.d $f5, \base, (5 * FPU_REG_WIDTH)
- EX fld.d $f6, \base, (6 * FPU_REG_WIDTH)
- EX fld.d $f7, \base, (7 * FPU_REG_WIDTH)
- EX fld.d $f8, \base, (8 * FPU_REG_WIDTH)
- EX fld.d $f9, \base, (9 * FPU_REG_WIDTH)
- EX fld.d $f10, \base, (10 * FPU_REG_WIDTH)
- EX fld.d $f11, \base, (11 * FPU_REG_WIDTH)
- EX fld.d $f12, \base, (12 * FPU_REG_WIDTH)
- EX fld.d $f13, \base, (13 * FPU_REG_WIDTH)
- EX fld.d $f14, \base, (14 * FPU_REG_WIDTH)
- EX fld.d $f15, \base, (15 * FPU_REG_WIDTH)
- EX fld.d $f16, \base, (16 * FPU_REG_WIDTH)
- EX fld.d $f17, \base, (17 * FPU_REG_WIDTH)
- EX fld.d $f18, \base, (18 * FPU_REG_WIDTH)
- EX fld.d $f19, \base, (19 * FPU_REG_WIDTH)
- EX fld.d $f20, \base, (20 * FPU_REG_WIDTH)
- EX fld.d $f21, \base, (21 * FPU_REG_WIDTH)
- EX fld.d $f22, \base, (22 * FPU_REG_WIDTH)
- EX fld.d $f23, \base, (23 * FPU_REG_WIDTH)
- EX fld.d $f24, \base, (24 * FPU_REG_WIDTH)
- EX fld.d $f25, \base, (25 * FPU_REG_WIDTH)
- EX fld.d $f26, \base, (26 * FPU_REG_WIDTH)
- EX fld.d $f27, \base, (27 * FPU_REG_WIDTH)
- EX fld.d $f28, \base, (28 * FPU_REG_WIDTH)
- EX fld.d $f29, \base, (29 * FPU_REG_WIDTH)
- EX fld.d $f30, \base, (30 * FPU_REG_WIDTH)
- EX fld.d $f31, \base, (31 * FPU_REG_WIDTH)
+ EX fld.d $f0, \base, (0 * FPU_REG_WIDTH)
+ EX fld.d $f1, \base, (1 * FPU_REG_WIDTH)
+ EX fld.d $f2, \base, (2 * FPU_REG_WIDTH)
+ EX fld.d $f3, \base, (3 * FPU_REG_WIDTH)
+ EX fld.d $f4, \base, (4 * FPU_REG_WIDTH)
+ EX fld.d $f5, \base, (5 * FPU_REG_WIDTH)
+ EX fld.d $f6, \base, (6 * FPU_REG_WIDTH)
+ EX fld.d $f7, \base, (7 * FPU_REG_WIDTH)
+ EX fld.d $f8, \base, (8 * FPU_REG_WIDTH)
+ EX fld.d $f9, \base, (9 * FPU_REG_WIDTH)
+ EX fld.d $f10, \base, (10 * FPU_REG_WIDTH)
+ EX fld.d $f11, \base, (11 * FPU_REG_WIDTH)
+ EX fld.d $f12, \base, (12 * FPU_REG_WIDTH)
+ EX fld.d $f13, \base, (13 * FPU_REG_WIDTH)
+ EX fld.d $f14, \base, (14 * FPU_REG_WIDTH)
+ EX fld.d $f15, \base, (15 * FPU_REG_WIDTH)
+ EX fld.d $f16, \base, (16 * FPU_REG_WIDTH)
+ EX fld.d $f17, \base, (17 * FPU_REG_WIDTH)
+ EX fld.d $f18, \base, (18 * FPU_REG_WIDTH)
+ EX fld.d $f19, \base, (19 * FPU_REG_WIDTH)
+ EX fld.d $f20, \base, (20 * FPU_REG_WIDTH)
+ EX fld.d $f21, \base, (21 * FPU_REG_WIDTH)
+ EX fld.d $f22, \base, (22 * FPU_REG_WIDTH)
+ EX fld.d $f23, \base, (23 * FPU_REG_WIDTH)
+ EX fld.d $f24, \base, (24 * FPU_REG_WIDTH)
+ EX fld.d $f25, \base, (25 * FPU_REG_WIDTH)
+ EX fld.d $f26, \base, (26 * FPU_REG_WIDTH)
+ EX fld.d $f27, \base, (27 * FPU_REG_WIDTH)
+ EX fld.d $f28, \base, (28 * FPU_REG_WIDTH)
+ EX fld.d $f29, \base, (29 * FPU_REG_WIDTH)
+ EX fld.d $f30, \base, (30 * FPU_REG_WIDTH)
+ EX fld.d $f31, \base, (31 * FPU_REG_WIDTH)
.endm
.macro sc_save_fcc base, tmp0, tmp1
movcf2gr \tmp0, $fcc0
- move \tmp1, \tmp0
+ move \tmp1, \tmp0
movcf2gr \tmp0, $fcc1
bstrins.d \tmp1, \tmp0, 15, 8
movcf2gr \tmp0, $fcc2
bstrins.d \tmp1, \tmp0, 55, 48
movcf2gr \tmp0, $fcc7
bstrins.d \tmp1, \tmp0, 63, 56
- EX st.d \tmp1, \base, 0
+ EX st.d \tmp1, \base, 0
.endm
.macro sc_restore_fcc base, tmp0, tmp1
- EX ld.d \tmp0, \base, 0
+ EX ld.d \tmp0, \base, 0
bstrpick.d \tmp1, \tmp0, 7, 0
movgr2cf $fcc0, \tmp1
bstrpick.d \tmp1, \tmp0, 15, 8
.macro sc_save_fcsr base, tmp0
movfcsr2gr \tmp0, fcsr0
- EX st.w \tmp0, \base, 0
+ EX st.w \tmp0, \base, 0
.endm
.macro sc_restore_fcsr base, tmp0
- EX ld.w \tmp0, \base, 0
+ EX ld.w \tmp0, \base, 0
movgr2fcsr fcsr0, \tmp0
.endm
*/
SYM_FUNC_START(_save_fp)
fpu_save_csr a0 t1
- fpu_save_double a0 t1 # clobbers t1
+ fpu_save_double a0 t1 # clobbers t1
fpu_save_cc a0 t1 t2 # clobbers t1, t2
- jirl zero, ra, 0
+ jr ra
SYM_FUNC_END(_save_fp)
EXPORT_SYMBOL(_save_fp)
* Restore a thread's fp context.
*/
SYM_FUNC_START(_restore_fp)
- fpu_restore_double a0 t1 # clobbers t1
- fpu_restore_csr a0 t1
- fpu_restore_cc a0 t1 t2 # clobbers t1, t2
- jirl zero, ra, 0
+ fpu_restore_double a0 t1 # clobbers t1
+ fpu_restore_csr a0 t1
+ fpu_restore_cc a0 t1 t2 # clobbers t1, t2
+ jr ra
SYM_FUNC_END(_restore_fp)
/*
movgr2fr.d $f30, t1
movgr2fr.d $f31, t1
- jirl zero, ra, 0
+ jr ra
SYM_FUNC_END(_init_fpu)
/*
* a2: fcsr
*/
SYM_FUNC_START(_save_fp_context)
- sc_save_fcc a1 t1 t2
- sc_save_fcsr a2 t1
- sc_save_fp a0
- li.w a0, 0 # success
- jirl zero, ra, 0
+ sc_save_fcc a1 t1 t2
+ sc_save_fcsr a2 t1
+ sc_save_fp a0
+ li.w a0, 0 # success
+ jr ra
SYM_FUNC_END(_save_fp_context)
/*
* a2: fcsr
*/
SYM_FUNC_START(_restore_fp_context)
- sc_restore_fp a0
- sc_restore_fcc a1 t1 t2
- sc_restore_fcsr a2 t1
- li.w a0, 0 # success
- jirl zero, ra, 0
+ sc_restore_fp a0
+ sc_restore_fcc a1 t1 t2
+ sc_restore_fcsr a2 t1
+ li.w a0, 0 # success
+ jr ra
SYM_FUNC_END(_restore_fp_context)
SYM_FUNC_START(fault)
li.w a0, -EFAULT # failure
- jirl zero, ra, 0
+ jr ra
SYM_FUNC_END(fault)
nop
idle 0
/* end of rollback region */
-1: jirl zero, ra, 0
+1: jr ra
SYM_FUNC_END(__arch_cpu_idle)
SYM_FUNC_START(handle_vint)
BACKUP_T0T1
SAVE_ALL
la.abs t1, __arch_cpu_idle
- LONG_L t0, sp, PT_ERA
+ LONG_L t0, sp, PT_ERA
/* 32 byte rollback region */
ori t0, t0, 0x1f
xori t0, t0, 0x1f
bne t0, t1, 1f
- LONG_S t0, sp, PT_ERA
+ LONG_S t0, sp, PT_ERA
1: move a0, sp
move a1, sp
la.abs t0, do_vint
- jirl ra, t0, 0
+ jirl ra, t0, 0
RESTORE_ALL_AND_RET
SYM_FUNC_END(handle_vint)
build_prep_\prep
move a0, sp
la.abs t0, do_\handler
- jirl ra, t0, 0
+ jirl ra, t0, 0
RESTORE_ALL_AND_RET
SYM_FUNC_END(handle_\exception)
.endm
SYM_FUNC_START(handle_sys)
la.abs t0, handle_syscall
- jirl zero, t0, 0
+ jr t0
SYM_FUNC_END(handle_sys)
/* We might not get launched at the address the kernel is linked to,
so we jump there. */
la.abs t0, 0f
- jirl zero, t0, 0
+ jr t0
0:
la t0, __bss_start # clear .bss
st.d zero, t0, 0
/* KSave3 used for percpu base, initialized as 0 */
csrwr zero, PERCPU_BASE_KS
/* GPR21 used for percpu base (runtime), initialized as 0 */
- or u0, zero, zero
+ move u0, zero
la tp, init_thread_union
/* Set the SP after an empty pt_regs. */
ld.d sp, t0, CPU_BOOT_STACK
ld.d tp, t0, CPU_BOOT_TINFO
- la.abs t0, 0f
- jirl zero, t0, 0
+ la.abs t0, 0f
+ jr t0
0:
bl start_secondary
SYM_CODE_END(smpboot_entry)
DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
EXPORT_PER_CPU_SYMBOL(irq_stat);
-struct irq_domain *cpu_domain;
-struct irq_domain *liointc_domain;
-struct irq_domain *pch_lpc_domain;
-struct irq_domain *pch_msi_domain[MAX_IO_PICS];
-struct irq_domain *pch_pic_domain[MAX_IO_PICS];
-
+struct acpi_vector_group pch_group[MAX_IO_PICS];
+struct acpi_vector_group msi_group[MAX_IO_PICS];
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
return 0;
}
+static int __init early_pci_mcfg_parse(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ struct acpi_mcfg_allocation *mptr;
+ int i, n;
+
+ if (header->length < sizeof(struct acpi_table_mcfg))
+ return -EINVAL;
+
+ n = (header->length - sizeof(struct acpi_table_mcfg)) /
+ sizeof(struct acpi_mcfg_allocation);
+ mcfg = (struct acpi_table_mcfg *)header;
+ mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+
+ for (i = 0; i < n; i++, mptr++) {
+ msi_group[i].pci_segment = mptr->pci_segment;
+ pch_group[i].node = msi_group[i].node = (mptr->address >> 44) & 0xf;
+ }
+
+ return 0;
+}
+
+static void __init init_vec_parent_group(void)
+{
+ int i;
+
+ for (i = 0; i < MAX_IO_PICS; i++) {
+ msi_group[i].pci_segment = -1;
+ msi_group[i].node = -1;
+ pch_group[i].node = -1;
+ }
+
+ acpi_table_parse(ACPI_SIG_MCFG, early_pci_mcfg_parse);
+}
+
+static int __init get_ipi_irq(void)
+{
+ struct irq_domain *d = irq_find_matching_fwnode(cpuintc_handle, DOMAIN_BUS_ANY);
+
+ if (d)
+ return irq_create_mapping(d, EXCCODE_IPI - EXCCODE_INT_START);
+
+ return -EINVAL;
+}
+
void __init init_IRQ(void)
{
int i;
clear_csr_ecfg(ECFG0_IM);
clear_csr_estat(ESTATF_IP);
+ init_vec_parent_group();
irqchip_init();
#ifdef CONFIG_SMP
- ipi_irq = EXCCODE_IPI - EXCCODE_INT_START;
+ ipi_irq = get_ipi_irq();
+ if (ipi_irq < 0)
+ panic("IPI IRQ mapping failed\n");
irq_set_percpu_devid(ipi_irq);
r = request_percpu_irq(ipi_irq, loongson3_ipi_interrupt, "IPI", &ipi_dummy_dev);
if (r < 0)
const void *kbuf, const void __user *ubuf)
{
const int fcc_start = NUM_FPU_REGS * sizeof(elf_fpreg_t);
- const int fcc_end = fcc_start + sizeof(u64);
+ const int fcsr_start = fcc_start + sizeof(u64);
int err;
BUG_ON(count % sizeof(elf_fpreg_t));
if (err)
return err;
- if (count > 0)
- err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.fcc,
- fcc_start, fcc_end);
+ err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpu.fcc, fcc_start,
+ fcc_start + sizeof(u64));
+ err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpu.fcsr, fcsr_start,
+ fcsr_start + sizeof(u32));
return err;
}
#include <linux/console.h>
#include <acpi/reboot.h>
-#include <asm/compiler.h>
#include <asm/idle.h>
#include <asm/loongarch.h>
#include <asm/reboot.h>
char *dmi_data = (char *)dm;
bios_extern = *(dmi_data + SMBIOS_BIOSEXTERN_OFFSET);
- b_info.bios_size = *(dmi_data + SMBIOS_BIOSSIZE_OFFSET);
+ b_info.bios_size = (*(dmi_data + SMBIOS_BIOSSIZE_OFFSET) + 1) << 6;
if (bios_extern & LOONGSON_EFI_ENABLE)
set_bit(EFI_BOOT, &efi.flags);
mb();
}
-/*
- * The target CPU should go to XKPRANGE (uncached area) and flush
- * ICache/DCache/VCache before the control CPU can safely disable its clock.
- */
-static void loongson3_play_dead(int *state_addr)
+void play_dead(void)
{
- register int val;
- register void *addr;
+ register uint64_t addr;
register void (*init_fn)(void);
- __asm__ __volatile__(
- " li.d %[addr], 0x8000000000000000\n"
- "1: cacop 0x8, %[addr], 0 \n" /* flush ICache */
- " cacop 0x8, %[addr], 1 \n"
- " cacop 0x8, %[addr], 2 \n"
- " cacop 0x8, %[addr], 3 \n"
- " cacop 0x9, %[addr], 0 \n" /* flush DCache */
- " cacop 0x9, %[addr], 1 \n"
- " cacop 0x9, %[addr], 2 \n"
- " cacop 0x9, %[addr], 3 \n"
- " addi.w %[sets], %[sets], -1 \n"
- " addi.d %[addr], %[addr], 0x40 \n"
- " bnez %[sets], 1b \n"
- " li.d %[addr], 0x8000000000000000\n"
- "2: cacop 0xa, %[addr], 0 \n" /* flush VCache */
- " cacop 0xa, %[addr], 1 \n"
- " cacop 0xa, %[addr], 2 \n"
- " cacop 0xa, %[addr], 3 \n"
- " cacop 0xa, %[addr], 4 \n"
- " cacop 0xa, %[addr], 5 \n"
- " cacop 0xa, %[addr], 6 \n"
- " cacop 0xa, %[addr], 7 \n"
- " cacop 0xa, %[addr], 8 \n"
- " cacop 0xa, %[addr], 9 \n"
- " cacop 0xa, %[addr], 10 \n"
- " cacop 0xa, %[addr], 11 \n"
- " cacop 0xa, %[addr], 12 \n"
- " cacop 0xa, %[addr], 13 \n"
- " cacop 0xa, %[addr], 14 \n"
- " cacop 0xa, %[addr], 15 \n"
- " addi.w %[vsets], %[vsets], -1 \n"
- " addi.d %[addr], %[addr], 0x40 \n"
- " bnez %[vsets], 2b \n"
- " li.w %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
- " st.w %[val], %[state_addr], 0 \n"
- " dbar 0 \n"
- " cacop 0x11, %[state_addr], 0 \n" /* flush entry of *state_addr */
- : [addr] "=&r" (addr), [val] "=&r" (val)
- : [state_addr] "r" (state_addr),
- [sets] "r" (cpu_data[smp_processor_id()].dcache.sets),
- [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets));
-
+ idle_task_exit();
local_irq_enable();
- change_csr_ecfg(ECFG0_IM, ECFGF_IPI);
+ set_csr_ecfg(ECFGF_IPI);
+ __this_cpu_write(cpu_state, CPU_DEAD);
+
+ __smp_mb();
+ do {
+ __asm__ __volatile__("idle 0\n\t");
+ addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
+ } while (addr == 0);
- __asm__ __volatile__(
- " idle 0 \n"
- " li.w $t0, 0x1020 \n"
- " iocsrrd.d %[init_fn], $t0 \n" /* Get init PC */
- : [init_fn] "=&r" (addr)
- : /* No Input */
- : "a0");
- init_fn = __va(addr);
+ init_fn = (void *)TO_CACHE(addr);
+ iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
init_fn();
unreachable();
}
-void play_dead(void)
-{
- int *state_addr;
- unsigned int cpu = smp_processor_id();
- void (*play_dead_uncached)(int *s);
-
- idle_task_exit();
- play_dead_uncached = (void *)TO_UNCACHE(__pa((unsigned long)loongson3_play_dead));
- state_addr = &per_cpu(cpu_state, cpu);
- mb();
- play_dead_uncached(state_addr);
-}
-
-static int loongson3_enable_clock(unsigned int cpu)
-{
- uint64_t core_id = cpu_data[cpu].core;
- uint64_t package_id = cpu_data[cpu].package;
-
- LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
-
- return 0;
-}
-
-static int loongson3_disable_clock(unsigned int cpu)
-{
- uint64_t core_id = cpu_data[cpu].core;
- uint64_t package_id = cpu_data[cpu].package;
-
- LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
-
- return 0;
-}
-
-static int register_loongson3_notifier(void)
-{
- return cpuhp_setup_state_nocalls(CPUHP_LOONGARCH_SOC_PREPARE,
- "loongarch/loongson:prepare",
- loongson3_enable_clock,
- loongson3_disable_clock);
-}
-early_initcall(register_loongson3_notifier);
-
#endif
/*
move tp, a2
cpu_restore_nonscratch a1
- li.w t0, _THREAD_SIZE - 32
- PTR_ADD t0, t0, tp
+ li.w t0, _THREAD_SIZE - 32
+ PTR_ADD t0, t0, tp
set_saved_sp t0, t1, t2
ldptr.d t1, a1, THREAD_CSRPRMD
csr_write64(-init_timeval, LOONGARCH_CSR_CNTC);
}
+static int get_timer_irq(void)
+{
+ struct irq_domain *d = irq_find_matching_fwnode(cpuintc_handle, DOMAIN_BUS_ANY);
+
+ if (d)
+ return irq_create_mapping(d, EXCCODE_TIMER - EXCCODE_INT_START);
+
+ return -EINVAL;
+}
+
int constant_clockevent_init(void)
{
unsigned int irq;
struct clock_event_device *cd;
static int timer_irq_installed = 0;
- irq = EXCCODE_TIMER - EXCCODE_INT_START;
+ irq = get_timer_irq();
+ if (irq < 0)
+ pr_err("Failed to map irq %d (timer)\n", irq);
cd = &per_cpu(constant_clockevent_device, cpu);
1: st.b zero, a0, 0
addi.d a0, a0, 1
addi.d a1, a1, -1
- bgt a1, zero, 1b
+ bgtz a1, 1b
2: move a0, a1
jr ra
addi.d a0, a0, 1
addi.d a1, a1, 1
addi.d a2, a2, -1
- bgt a2, zero, 1b
+ bgtz a2, 1b
3: move a0, a2
jr ra
#include <linux/smp.h>
#include <linux/timex.h>
-#include <asm/compiler.h>
#include <asm/processor.h>
void __delay(unsigned long cycles)
.align 5
SYM_FUNC_START(clear_page)
- lu12i.w t0, 1 << (PAGE_SHIFT - 12)
- add.d t0, t0, a0
+ lu12i.w t0, 1 << (PAGE_SHIFT - 12)
+ add.d t0, t0, a0
1:
- st.d zero, a0, 0
- st.d zero, a0, 8
- st.d zero, a0, 16
- st.d zero, a0, 24
- st.d zero, a0, 32
- st.d zero, a0, 40
- st.d zero, a0, 48
- st.d zero, a0, 56
- addi.d a0, a0, 128
- st.d zero, a0, -64
- st.d zero, a0, -56
- st.d zero, a0, -48
- st.d zero, a0, -40
- st.d zero, a0, -32
- st.d zero, a0, -24
- st.d zero, a0, -16
- st.d zero, a0, -8
- bne t0, a0, 1b
+ st.d zero, a0, 0
+ st.d zero, a0, 8
+ st.d zero, a0, 16
+ st.d zero, a0, 24
+ st.d zero, a0, 32
+ st.d zero, a0, 40
+ st.d zero, a0, 48
+ st.d zero, a0, 56
+ addi.d a0, a0, 128
+ st.d zero, a0, -64
+ st.d zero, a0, -56
+ st.d zero, a0, -48
+ st.d zero, a0, -40
+ st.d zero, a0, -32
+ st.d zero, a0, -24
+ st.d zero, a0, -16
+ st.d zero, a0, -8
+ bne t0, a0, 1b
- jirl $r0, ra, 0
+ jr ra
SYM_FUNC_END(clear_page)
EXPORT_SYMBOL(clear_page)
.align 5
SYM_FUNC_START(copy_page)
- lu12i.w t8, 1 << (PAGE_SHIFT - 12)
- add.d t8, t8, a0
+ lu12i.w t8, 1 << (PAGE_SHIFT - 12)
+ add.d t8, t8, a0
1:
- ld.d t0, a1, 0
- ld.d t1, a1, 8
- ld.d t2, a1, 16
- ld.d t3, a1, 24
- ld.d t4, a1, 32
- ld.d t5, a1, 40
- ld.d t6, a1, 48
- ld.d t7, a1, 56
+ ld.d t0, a1, 0
+ ld.d t1, a1, 8
+ ld.d t2, a1, 16
+ ld.d t3, a1, 24
+ ld.d t4, a1, 32
+ ld.d t5, a1, 40
+ ld.d t6, a1, 48
+ ld.d t7, a1, 56
- st.d t0, a0, 0
- st.d t1, a0, 8
- ld.d t0, a1, 64
- ld.d t1, a1, 72
- st.d t2, a0, 16
- st.d t3, a0, 24
- ld.d t2, a1, 80
- ld.d t3, a1, 88
- st.d t4, a0, 32
- st.d t5, a0, 40
- ld.d t4, a1, 96
- ld.d t5, a1, 104
- st.d t6, a0, 48
- st.d t7, a0, 56
- ld.d t6, a1, 112
- ld.d t7, a1, 120
- addi.d a0, a0, 128
- addi.d a1, a1, 128
+ st.d t0, a0, 0
+ st.d t1, a0, 8
+ ld.d t0, a1, 64
+ ld.d t1, a1, 72
+ st.d t2, a0, 16
+ st.d t3, a0, 24
+ ld.d t2, a1, 80
+ ld.d t3, a1, 88
+ st.d t4, a0, 32
+ st.d t5, a0, 40
+ ld.d t4, a1, 96
+ ld.d t5, a1, 104
+ st.d t6, a0, 48
+ st.d t7, a0, 56
+ ld.d t6, a1, 112
+ ld.d t7, a1, 120
+ addi.d a0, a0, 128
+ addi.d a1, a1, 128
- st.d t0, a0, -64
- st.d t1, a0, -56
- st.d t2, a0, -48
- st.d t3, a0, -40
- st.d t4, a0, -32
- st.d t5, a0, -24
- st.d t6, a0, -16
- st.d t7, a0, -8
+ st.d t0, a0, -64
+ st.d t1, a0, -56
+ st.d t2, a0, -48
+ st.d t3, a0, -40
+ st.d t4, a0, -32
+ st.d t5, a0, -24
+ st.d t6, a0, -16
+ st.d t7, a0, -8
- bne t8, a0, 1b
- jirl $r0, ra, 0
+ bne t8, a0, 1b
+ jr ra
SYM_FUNC_END(copy_page)
EXPORT_SYMBOL(copy_page)
REG_S a2, sp, PT_BVADDR
li.w a1, \write
la.abs t0, do_page_fault
- jirl ra, t0, 0
+ jirl ra, t0, 0
RESTORE_ALL_AND_RET
SYM_FUNC_END(tlb_do_page_fault_\write)
.endm
csrrd a2, LOONGARCH_CSR_BADV
REG_S a2, sp, PT_BVADDR
la.abs t0, do_page_fault
- jirl ra, t0, 0
+ jirl ra, t0, 0
RESTORE_ALL_AND_RET
SYM_FUNC_END(handle_tlb_protect)
* The vmalloc handling is not in the hotpath.
*/
csrrd t0, LOONGARCH_CSR_BADV
- blt t0, $r0, vmalloc_load
+ bltz t0, vmalloc_load
csrrd t1, LOONGARCH_CSR_PGDL
vmalloc_done_load:
* see if we need to jump to huge tlb processing.
*/
andi t0, ra, _PAGE_HUGE
- bne t0, $r0, tlb_huge_update_load
+ bnez t0, tlb_huge_update_load
csrrd t0, LOONGARCH_CSR_BADV
srli.d t0, t0, (PAGE_SHIFT + PTE_ORDER)
srli.d ra, t0, _PAGE_PRESENT_SHIFT
andi ra, ra, 1
- beq ra, $r0, nopage_tlb_load
+ beqz ra, nopage_tlb_load
ori t0, t0, _PAGE_VALID
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, smp_pgtable_change_load
+ beqz t0, smp_pgtable_change_load
#else
st.d t0, t1, 0
#endif
#endif
srli.d ra, t0, _PAGE_PRESENT_SHIFT
andi ra, ra, 1
- beq ra, $r0, nopage_tlb_load
+ beqz ra, nopage_tlb_load
tlbsrch
ori t0, t0, _PAGE_VALID
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, tlb_huge_update_load
+ beqz t0, tlb_huge_update_load
ld.d t0, t1, 0
#else
st.d t0, t1, 0
#endif
- addu16i.d t1, $r0, -(CSR_TLBIDX_EHINV >> 16)
- addi.d ra, t1, 0
- csrxchg ra, t1, LOONGARCH_CSR_TLBIDX
+ addu16i.d t1, zero, -(CSR_TLBIDX_EHINV >> 16)
+ addi.d ra, t1, 0
+ csrxchg ra, t1, LOONGARCH_CSR_TLBIDX
tlbwr
- csrxchg $r0, t1, LOONGARCH_CSR_TLBIDX
+ csrxchg zero, t1, LOONGARCH_CSR_TLBIDX
/*
* A huge PTE describes an area the size of the
addi.d t0, ra, 0
/* Convert to entrylo1 */
- addi.d t1, $r0, 1
+ addi.d t1, zero, 1
slli.d t1, t1, (HPAGE_SHIFT - 1)
add.d t0, t0, t1
csrwr t0, LOONGARCH_CSR_TLBELO1
/* Set huge page tlb entry size */
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
tlbfill
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
nopage_tlb_load:
dbar 0
csrrd ra, EXCEPTION_KS2
la.abs t0, tlb_do_page_fault_0
- jirl $r0, t0, 0
+ jr t0
SYM_FUNC_END(handle_tlb_load)
SYM_FUNC_START(handle_tlb_store)
* The vmalloc handling is not in the hotpath.
*/
csrrd t0, LOONGARCH_CSR_BADV
- blt t0, $r0, vmalloc_store
+ bltz t0, vmalloc_store
csrrd t1, LOONGARCH_CSR_PGDL
vmalloc_done_store:
* see if we need to jump to huge tlb processing.
*/
andi t0, ra, _PAGE_HUGE
- bne t0, $r0, tlb_huge_update_store
+ bnez t0, tlb_huge_update_store
csrrd t0, LOONGARCH_CSR_BADV
srli.d t0, t0, (PAGE_SHIFT + PTE_ORDER)
srli.d ra, t0, _PAGE_PRESENT_SHIFT
andi ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
xori ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
- bne ra, $r0, nopage_tlb_store
+ bnez ra, nopage_tlb_store
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, smp_pgtable_change_store
+ beqz t0, smp_pgtable_change_store
#else
st.d t0, t1, 0
#endif
srli.d ra, t0, _PAGE_PRESENT_SHIFT
andi ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
xori ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
- bne ra, $r0, nopage_tlb_store
+ bnez ra, nopage_tlb_store
tlbsrch
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, tlb_huge_update_store
+ beqz t0, tlb_huge_update_store
ld.d t0, t1, 0
#else
st.d t0, t1, 0
#endif
- addu16i.d t1, $r0, -(CSR_TLBIDX_EHINV >> 16)
- addi.d ra, t1, 0
- csrxchg ra, t1, LOONGARCH_CSR_TLBIDX
+ addu16i.d t1, zero, -(CSR_TLBIDX_EHINV >> 16)
+ addi.d ra, t1, 0
+ csrxchg ra, t1, LOONGARCH_CSR_TLBIDX
tlbwr
- csrxchg $r0, t1, LOONGARCH_CSR_TLBIDX
+ csrxchg zero, t1, LOONGARCH_CSR_TLBIDX
/*
* A huge PTE describes an area the size of the
* configured huge page size. This is twice the
addi.d t0, ra, 0
/* Convert to entrylo1 */
- addi.d t1, $r0, 1
+ addi.d t1, zero, 1
slli.d t1, t1, (HPAGE_SHIFT - 1)
add.d t0, t0, t1
csrwr t0, LOONGARCH_CSR_TLBELO1
/* Set huge page tlb entry size */
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
tlbfill
/* Reset default page size */
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
nopage_tlb_store:
dbar 0
csrrd ra, EXCEPTION_KS2
la.abs t0, tlb_do_page_fault_1
- jirl $r0, t0, 0
+ jr t0
SYM_FUNC_END(handle_tlb_store)
SYM_FUNC_START(handle_tlb_modify)
* The vmalloc handling is not in the hotpath.
*/
csrrd t0, LOONGARCH_CSR_BADV
- blt t0, $r0, vmalloc_modify
+ bltz t0, vmalloc_modify
csrrd t1, LOONGARCH_CSR_PGDL
vmalloc_done_modify:
* see if we need to jump to huge tlb processing.
*/
andi t0, ra, _PAGE_HUGE
- bne t0, $r0, tlb_huge_update_modify
+ bnez t0, tlb_huge_update_modify
csrrd t0, LOONGARCH_CSR_BADV
srli.d t0, t0, (PAGE_SHIFT + PTE_ORDER)
srli.d ra, t0, _PAGE_WRITE_SHIFT
andi ra, ra, 1
- beq ra, $r0, nopage_tlb_modify
+ beqz ra, nopage_tlb_modify
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, smp_pgtable_change_modify
+ beqz t0, smp_pgtable_change_modify
#else
st.d t0, t1, 0
#endif
ertn
#ifdef CONFIG_64BIT
vmalloc_modify:
- la.abs t1, swapper_pg_dir
+ la.abs t1, swapper_pg_dir
b vmalloc_done_modify
#endif
srli.d ra, t0, _PAGE_WRITE_SHIFT
andi ra, ra, 1
- beq ra, $r0, nopage_tlb_modify
+ beqz ra, nopage_tlb_modify
tlbsrch
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
#ifdef CONFIG_SMP
sc.d t0, t1, 0
- beq t0, $r0, tlb_huge_update_modify
+ beqz t0, tlb_huge_update_modify
ld.d t0, t1, 0
#else
st.d t0, t1, 0
addi.d t0, ra, 0
/* Convert to entrylo1 */
- addi.d t1, $r0, 1
+ addi.d t1, zero, 1
slli.d t1, t1, (HPAGE_SHIFT - 1)
add.d t0, t0, t1
csrwr t0, LOONGARCH_CSR_TLBELO1
/* Set huge page tlb entry size */
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
- csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
tlbwr
/* Reset default page size */
- addu16i.d t0, $r0, (CSR_TLBIDX_PS >> 16)
- addu16i.d t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
- csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
+ addu16i.d t0, zero, (CSR_TLBIDX_PS >> 16)
+ addu16i.d t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+ csrxchg t1, t0, LOONGARCH_CSR_TLBIDX
nopage_tlb_modify:
dbar 0
csrrd ra, EXCEPTION_KS2
la.abs t0, tlb_do_page_fault_1
- jirl $r0, t0, 0
+ jr t0
SYM_FUNC_END(handle_tlb_modify)
SYM_FUNC_START(handle_tlb_refill)
select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
- Freescale Coldfire 5207/5208 processor support.
+ Freescale Coldfire 5207/5208 processor support.
config M523x
bool "MCF523x"
endif # COLDFIRE
-
comment "Processor Specific Options"
config M68KFPU_EMU
Split the ColdFire CPU cache, and use half as an instruction cache
and half as a data cache.
endchoice
-endif
+endif # HAVE_CACHE_SPLIT
if HAVE_CACHE_CB
choice
help
The ColdFire CPU cache is set into Copy-back mode.
endchoice
-endif
+endif # HAVE_CACHE_CB
# SPDX-License-Identifier: GPL-2.0
config BOOTPARAM
- bool 'Compiled-in Kernel Boot Parameter'
+ bool "Compiled-in Kernel Boot Parameter"
config BOOTPARAM_STRING
- string 'Kernel Boot Parameter'
- default 'console=ttyS0,19200'
+ string "Kernel Boot Parameter"
+ default "console=ttyS0,19200"
depends on BOOTPARAM
config EARLY_PRINTK
select RTC_CLASS
select RTC_DRV_GOLDFISH
select TTY
+ select VIRTIO_MENU
select VIRTIO_MMIO
help
This options enable a pure virtual machine based on m68k,
- VIRTIO MMIO devices and GOLDFISH interfaces (TTY, RTC, PIC)
+ VIRTIO MMIO devices and GOLDFISH interfaces (TTY, RTC, PIC).
config PILOT
bool
endchoice
-endif
+endif # !MMU || COLDFIRE
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_PARPORT_1284=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_PARPORT_ATARI=m
CONFIG_PARPORT_1284=y
CONFIG_ATARI_FLOPPY=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68040=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
CONFIG_BLK_DEV_SWIM=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68020=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_ATARI_FLOPPY=y
CONFIG_BLK_DEV_SWIM=m
CONFIG_AMIGA_Z2RAM=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68030=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68040=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_M68040=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_1284=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_SUN3=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_USERFAULTFD=y
-CONFIG_SLAB=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y
CONFIG_SUN3X=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
# CONFIG_COMPACTION is not set
-CONFIG_ZPOOL=m
+CONFIG_USERFAULTFD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_CONNECTOR=m
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
-CONFIG_BITFIELD_KUNIT=m
-CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CMDLINE_KUNIT_TEST=m
-CONFIG_BITS_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
return 32 - cnt;
}
-static inline int __fls(int x)
+static inline unsigned long __fls(unsigned long x)
{
return fls(x) - 1;
}
}
unsigned long __get_wchan(struct task_struct *p);
+void show_registers(struct pt_regs *regs);
#define KSTK_EIP(tsk) \
({ \
#define BI_VIRT_VIRTIO_BASE 0x8004
#define BI_VIRT_CTRL_BASE 0x8005
+/*
+ * A random seed used to initialize the RNG. Record format:
+ *
+ * - length [ 2 bytes, 16-bit big endian ]
+ * - seed data [ `length` bytes, padded to preserve 2-byte alignment ]
+ */
+#define BI_VIRT_RNG_SEED 0x8006
+
#define VIRT_BOOTI_VERSION MK_BI_VERSION(2, 0)
#endif /* _UAPI_ASM_M68K_BOOTINFO_MAC_H */
#include <linux/uaccess.h>
#include <asm/traps.h>
#include <asm/machdep.h>
+#include <asm/processor.h>
#include <asm/siginfo.h>
#include <asm/tlbflush.h>
* check this.)
* 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
* gone, IOP base addresses are now in an array and the
- * globally-visible functions take an IOP number instead of an
+ * globally-visible functions take an IOP number instead of
* an actual base address.
* 990610 (jmt) - Finished the message passing framework and it seems to work.
* Sending _definitely_ works; my adb-bus.c mods can send
* a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
* channel is connected to a specific software driver on the IOP. For example
* on the SCC IOP there is one channel for each serial port. Each channel has
- * an incoming and and outgoing message queue with a depth of one.
+ * an incoming and an outgoing message queue with a depth of one.
*
* A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
* MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the
#include <asm/mac_baboon.h>
#include <asm/hwtest.h>
#include <asm/irq_regs.h>
-
-extern void show_registers(struct pt_regs *);
-
-irqreturn_t mac_nmi_handler(int, void *);
+#include <asm/processor.h>
static unsigned int mac_irq_startup(struct irq_data *);
static void mac_irq_shutdown(struct irq_data *);
.irq_shutdown = mac_irq_shutdown,
};
+static irqreturn_t mac_nmi_handler(int irq, void *dev_id)
+{
+ static volatile int in_nmi;
+
+ if (in_nmi)
+ return IRQ_HANDLED;
+ in_nmi = 1;
+
+ pr_info("Non-Maskable Interrupt\n");
+ show_registers(get_irq_regs());
+
+ in_nmi = 0;
+ return IRQ_HANDLED;
+}
+
void __init mac_init_IRQ(void)
{
m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
else
mac_irq_disable(data);
}
-
-static volatile int in_nmi;
-
-irqreturn_t mac_nmi_handler(int irq, void *dev_id)
-{
- if (in_nmi)
- return IRQ_HANDLED;
- in_nmi = 1;
-
- pr_info("Non-Maskable Interrupt\n");
- show_registers(get_irq_regs());
-
- in_nmi = 0;
- return IRQ_HANDLED;
-}
* 33 : frame int (50/200 Hz periodic timer)
* 34 : sample int (10/20 KHz periodic timer)
*
-*/
+ */
static void q40_irq_handler(unsigned int, struct pt_regs *fp);
static void q40_irq_enable(struct irq_data *data);
if(context) {
if(!ctx_alloc[context])
- panic("clear_context: context not allocated\n");
+ panic("%s: context not allocated\n", __func__);
ctx_alloc[context]->context = SUN3_INVALID_CONTEXT;
ctx_alloc[context] = (struct mm_struct *)0;
}
// check to make sure one was really free...
if(new == CONTEXTS_NUM)
- panic("get_free_context: failed to find free context");
+ panic("%s: failed to find free context", __func__);
}
ctx_alloc[new] = mm;
}
#ifdef DEBUG_MMU_EMU
- pr_info("mmu_emu_handle_fault: vaddr=%lx type=%s crp=%p\n",
- vaddr, read_flag ? "read" : "write", crp);
+ pr_info("%s: vaddr=%lx type=%s crp=%p\n", __func__, vaddr,
+ read_flag ? "read" : "write", crp);
#endif
segment = (vaddr >> SUN3_PMEG_SIZE_BITS) & 0x7FF;
offset = (vaddr >> SUN3_PTE_SIZE_BITS) & 0xF;
#ifdef DEBUG_MMU_EMU
- pr_info("mmu_emu_handle_fault: segment=%lx offset=%lx\n", segment,
- offset);
+ pr_info("%s: segment=%lx offset=%lx\n", __func__, segment, offset);
#endif
pte = (pte_t *) pgd_val (*(crp + segment));
#include <linux/reboot.h>
#include <linux/serial_core.h>
+#include <linux/random.h>
#include <clocksource/timer-goldfish.h>
#include <asm/bootinfo.h>
data += 4;
virt_bi_data.virtio.irq = be32_to_cpup(data);
break;
+ case BI_VIRT_RNG_SEED: {
+ u16 len = be16_to_cpup(data);
+ add_bootloader_randomness(data + 2, len);
+ /*
+ * Zero the data to preserve forward secrecy, and zero the
+ * length to prevent kexec from using it.
+ */
+ memzero_explicit((void *)data, len + 2);
+ break;
+ }
default:
unknown = 1;
break;
#include <asm/hwtest.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
+#include <asm/processor.h>
#include <asm/virt.h>
#define GFPIC_REG_IRQ_PENDING 0x04
#define GFPIC_REG_IRQ_DISABLE 0x0c
#define GFPIC_REG_IRQ_ENABLE 0x10
-extern void show_registers(struct pt_regs *regs);
-
static struct resource picres[6];
static const char *picname[6] = {
"goldfish_pic.0",
#define VIRTIO_BUS_NB 128
-static int __init virt_virtio_init(unsigned int id)
+static struct platform_device * __init virt_virtio_init(unsigned int id)
{
const struct resource res[] = {
DEFINE_RES_MEM(virt_bi_data.virtio.mmio + id * 0x200, 0x200),
DEFINE_RES_IRQ(virt_bi_data.virtio.irq + id),
};
- struct platform_device *pdev;
- pdev = platform_device_register_simple("virtio-mmio", id,
+ return platform_device_register_simple("virtio-mmio", id,
res, ARRAY_SIZE(res));
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return 0;
}
static int __init virt_platform_init(void)
DEFINE_RES_MEM(virt_bi_data.rtc.mmio + 0x1000, 0x1000),
DEFINE_RES_IRQ(virt_bi_data.rtc.irq + 1),
};
- struct platform_device *pdev;
+ struct platform_device *pdev1, *pdev2;
+ struct platform_device *pdevs[VIRTIO_BUS_NB];
unsigned int i;
+ int ret = 0;
if (!MACH_IS_VIRT)
return -ENODEV;
/* We need this to have DMA'able memory provided to goldfish-tty */
min_low_pfn = 0;
- pdev = platform_device_register_simple("goldfish_tty",
- PLATFORM_DEVID_NONE,
- goldfish_tty_res,
- ARRAY_SIZE(goldfish_tty_res));
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
+ pdev1 = platform_device_register_simple("goldfish_tty",
+ PLATFORM_DEVID_NONE,
+ goldfish_tty_res,
+ ARRAY_SIZE(goldfish_tty_res));
+ if (IS_ERR(pdev1))
+ return PTR_ERR(pdev1);
- pdev = platform_device_register_simple("goldfish_rtc",
- PLATFORM_DEVID_NONE,
- goldfish_rtc_res,
- ARRAY_SIZE(goldfish_rtc_res));
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
+ pdev2 = platform_device_register_simple("goldfish_rtc",
+ PLATFORM_DEVID_NONE,
+ goldfish_rtc_res,
+ ARRAY_SIZE(goldfish_rtc_res));
+ if (IS_ERR(pdev2)) {
+ ret = PTR_ERR(pdev2);
+ goto err_unregister_tty;
+ }
for (i = 0; i < VIRTIO_BUS_NB; i++) {
- int err;
-
- err = virt_virtio_init(i);
- if (err)
- return err;
+ pdevs[i] = virt_virtio_init(i);
+ if (IS_ERR(pdevs[i])) {
+ ret = PTR_ERR(pdevs[i]);
+ goto err_unregister_rtc_virtio;
+ }
}
return 0;
+
+err_unregister_rtc_virtio:
+ while (i > 0)
+ platform_device_unregister(pdevs[--i]);
+ platform_device_unregister(pdev2);
+err_unregister_tty:
+ platform_device_unregister(pdev1);
+
+ return ret;
}
arch_initcall(virt_platform_init);
#ifdef CONFIG_SMP
int cpu;
- struct cpumask *mask = irq_data_get_affinity_mask(data);
+ const struct cpumask *mask = irq_data_get_affinity_mask(data);
int weight = cpumask_weight(mask);
struct octeon_ciu_chip_data *cd = irq_data_get_irq_chip_data(data);
{
int cpu = smp_processor_id();
cpumask_t new_affinity;
- struct cpumask *mask = irq_data_get_affinity_mask(data);
+ const struct cpumask *mask = irq_data_get_affinity_mask(data);
if (!cpumask_test_cpu(cpu, mask))
return;
#ifndef _ASM_MIPS_JUMP_LABEL_H
#define _ASM_MIPS_JUMP_LABEL_H
+#define arch_jump_label_transform_static arch_jump_label_transform
+
#ifndef __ASSEMBLY__
#include <linux/types.h>
#define NR_MIPS_CPU_IRQS 8
#define NR_MAX_CHAINED_IRQS 40 /* Chained IRQs means those not directly used by devices */
#define NR_IRQS (NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + NR_MAX_CHAINED_IRQS + 256)
-
+#define MAX_IO_PICS 1
#define MIPS_CPU_IRQ_BASE NR_IRQS_LEGACY
+#define GSI_MIN_CPU_IRQ 0
#include <asm/mach-generic/irq.h>
mutex_unlock(&text_mutex);
}
+
+#ifdef CONFIG_MODULES
+void jump_label_apply_nops(struct module *mod)
+{
+ struct jump_entry *iter_start = mod->jump_entries;
+ struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+ struct jump_entry *iter;
+
+ /* if the module doesn't have jump label entries, just return */
+ if (iter_start == iter_stop)
+ return;
+
+ for (iter = iter_start; iter < iter_stop; iter++) {
+ /* Only write NOPs for arch_branch_static(). */
+ if (jump_label_init_type(iter) == JUMP_LABEL_NOP)
+ arch_jump_label_transform(iter, JUMP_LABEL_NOP);
+ }
+}
+#endif
#include <linux/spinlock.h>
#include <linux/jump_label.h>
+extern void jump_label_apply_nops(struct module *mod);
struct mips_hi16 {
struct mips_hi16 *next;
const Elf_Shdr *s;
char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
- /* Make jump label nops. */
- jump_label_apply_nops(me);
+ if (IS_ENABLED(CONFIG_JUMP_LABEL))
+ jump_label_apply_nops(me);
INIT_LIST_HEAD(&me->arch.dbe_list);
for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
{
#ifdef CONFIG_SMP
struct irq_data *d = irq_get_irq_data(irq);
- cpumask_copy(irq_data_get_affinity_mask(d), cpumask_of(cpu));
+ irq_data_update_affinity(d, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
patch_text(addr, insn);
}
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- /*
- * We use the architected NOP in arch_static_branch, so there's no
- * need to patch an identical NOP over the top of it here. The core
- * will call arch_jump_label_transform from a module notifier if the
- * NOP needs to be replaced by a branch.
- */
-}
# Please keep this list sorted alphabetically.
#
+config PPC_LONG_DOUBLE_128
+ depends on PPC64
+ def_bool $(success,test "$(shell,echo __LONG_DOUBLE_128__ | $(CC) -E -P -)" = 1)
+
config PPC_BARRIER_NOSPEC
bool
default y
CFLAGS_prom_init.o += -fno-stack-protector
CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING
CFLAGS_prom_init.o += -ffreestanding
+CFLAGS_prom_init.o += $(call cc-option, -ftrivial-auto-var-init=uninitialized)
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
$(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
- $(build)=arch/riscv/kernel/compat_vdso $@)
+ $(build)=arch/riscv/kernel/compat_vdso compat_$@)
ifeq ($(KBUILD_EXTMOD),)
ifeq ($(CONFIG_MMU),y)
patch_text_nosync(addr, &insn, sizeof(insn));
mutex_unlock(&text_mutex);
}
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- /*
- * We use the same instructions in the arch_static_branch and
- * arch_static_branch_jump inline functions, so there's no
- * need to patch them up here.
- * The core will call arch_jump_label_transform when those
- * instructions need to be replaced.
- */
-}
/*
* Kernel interface for the s390 arch_random_* functions
*
- * Copyright IBM Corp. 2017, 2020
+ * Copyright IBM Corp. 2017, 2022
*
* Author: Harald Freudenberger <freude@de.ibm.com>
*
#ifdef CONFIG_ARCH_RANDOM
#include <linux/static_key.h>
+#include <linux/preempt.h>
#include <linux/atomic.h>
#include <asm/cpacf.h>
static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
{
- if (static_branch_likely(&s390_arch_random_available)) {
+ if (static_branch_likely(&s390_arch_random_available) &&
+ in_task()) {
cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
atomic64_add(sizeof(*v), &s390_arch_random_counter);
return true;
static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
{
- if (static_branch_likely(&s390_arch_random_available)) {
+ if (static_branch_likely(&s390_arch_random_available) &&
+ in_task()) {
cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
atomic64_add(sizeof(*v), &s390_arch_random_counter);
return true;
#include <linux/stringify.h>
#define JUMP_LABEL_NOP_SIZE 6
-#define JUMP_LABEL_NOP_OFFSET 2
#ifdef CONFIG_CC_IS_CLANG
#define JUMP_LABEL_STATIC_KEY_CONSTRAINT "i"
#endif
/*
- * We use a brcl 0,2 instruction for jump labels at compile time so it
+ * We use a brcl 0,<offset> instruction for jump labels so it
* can be easily distinguished from a hotpatch generated instruction.
*/
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
{
- asm_volatile_goto("0: brcl 0,"__stringify(JUMP_LABEL_NOP_OFFSET)"\n"
+ asm_volatile_goto("0: brcl 0,%l[label]\n"
".pushsection __jump_table,\"aw\"\n"
".balign 8\n"
".long 0b-.,%l[label]-.\n"
panic("Corrupted kernel text");
}
-static struct insn orignop = {
- .opcode = 0xc004,
- .offset = JUMP_LABEL_NOP_OFFSET >> 1,
-};
-
static void jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type,
- int init)
+ enum jump_label_type type)
{
void *code = (void *)jump_entry_code(entry);
struct insn old, new;
jump_label_make_branch(entry, &old);
jump_label_make_nop(entry, &new);
}
- if (init) {
- if (memcmp(code, &orignop, sizeof(orignop)))
- jump_label_bug(entry, &orignop, &new);
- } else {
- if (memcmp(code, &old, sizeof(old)))
- jump_label_bug(entry, &old, &new);
- }
+ if (memcmp(code, &old, sizeof(old)))
+ jump_label_bug(entry, &old, &new);
s390_kernel_write(code, &new, sizeof(new));
}
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
- jump_label_transform(entry, type, 0);
+ jump_label_transform(entry, type);
text_poke_sync();
}
bool arch_jump_label_transform_queue(struct jump_entry *entry,
enum jump_label_type type)
{
- jump_label_transform(entry, type, 0);
+ jump_label_transform(entry, type);
return true;
}
{
text_poke_sync();
}
-
-void __init_or_module arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- jump_label_transform(entry, type, 1);
- text_poke_sync();
-}
#endif /* CONFIG_FUNCTION_TRACER */
}
- jump_label_apply_nops(me);
return 0;
}
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_SH_SIR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
struct irq_data *data = irq_get_irq_data(irq);
if (irq_data_get_node(data) == cpu) {
- struct cpumask *mask = irq_data_get_affinity_mask(data);
+ const struct cpumask *mask = irq_data_get_affinity_mask(data);
unsigned int newcpu = cpumask_any_and(mask,
cpu_online_mask);
if (newcpu >= nr_cpu_ids) {
pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
irq, cpu);
- cpumask_setall(mask);
+ irq_set_affinity(irq, cpu_all_mask);
+ } else {
+ irq_set_affinity(irq, mask);
}
- irq_set_affinity(irq, mask);
}
}
}
const Elf_Shdr *sechdrs,
struct module *me)
{
- /* make jump label nops */
- jump_label_apply_nops(me);
-
do_patch_sections(hdr, sechdrs);
/* Cheetah's I-cache is fully coherent. */
tools/test_get_len
tools/insn_sanity
tools/insn_decoder_test
-purgatory/kexec-purgatory.c
purgatory/purgatory.ro
-
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
select TRACE_IRQFLAGS_SUPPORT
+ select TRACE_IRQFLAGS_NMI_SUPPORT
select USER_STACKTRACE_SUPPORT
select VIRT_TO_BUS
select HAVE_ARCH_KCSAN if X86_64
config CC_HAS_SANE_STACKPROTECTOR
bool
- default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC)) if 64BIT
- default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC))
+ default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) $(CLANG_FLAGS)) if 64BIT
+ default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC) $(CLANG_FLAGS))
help
We have to make sure stack protector is unconditionally disabled if
the compiler produces broken code or if it does not let us control
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
- select BUILD_BIN2C
+ select HAVE_IMA_KEXEC if IMA
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
# SPDX-License-Identifier: GPL-2.0
-config TRACE_IRQFLAGS_NMI_SUPPORT
- def_bool y
-
config EARLY_PRINTK_USB
bool
#define NUM_COUNTERS_NB 4
#define NUM_COUNTERS_L2 4
#define NUM_COUNTERS_L3 6
-#define MAX_COUNTERS 6
#define RDPMC_BASE_NB 6
#define RDPMC_BASE_LLC 10
#undef pr_fmt
#define pr_fmt(fmt) "amd_uncore: " fmt
+static int pmu_version;
static int num_counters_llc;
static int num_counters_nb;
static bool l3_mask;
u32 msr_base;
cpumask_t *active_mask;
struct pmu *pmu;
- struct perf_event *events[MAX_COUNTERS];
+ struct perf_event **events;
struct hlist_node node;
};
hwc->event_base_rdpmc = uncore->rdpmc_base + hwc->idx;
hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+ /*
+ * The first four DF counters are accessible via RDPMC index 6 to 9
+ * followed by the L3 counters from index 10 to 15. For processors
+ * with more than four DF counters, the DF RDPMC assignments become
+ * discontiguous as the additional counters are accessible starting
+ * from index 16.
+ */
+ if (is_nb_event(event) && hwc->idx >= NUM_COUNTERS_NB)
+ hwc->event_base_rdpmc += NUM_COUNTERS_L3;
+
if (flags & PERF_EF_START)
amd_uncore_start(event, PERF_EF_RELOAD);
{
struct amd_uncore *uncore;
struct hw_perf_event *hwc = &event->hw;
+ u64 event_mask = AMD64_RAW_EVENT_MASK_NB;
if (event->attr.type != event->pmu->type)
return -ENOENT;
+ if (pmu_version >= 2 && is_nb_event(event))
+ event_mask = AMD64_PERFMON_V2_RAW_EVENT_MASK_NB;
+
/*
* NB and Last level cache counters (MSRs) are shared across all cores
* that share the same NB / Last level cache. On family 16h and below,
* out. So we do not support sampling and per-thread events via
* CAP_NO_INTERRUPT, and we do not enable counter overflow interrupts:
*/
- hwc->config = event->attr.config & AMD64_RAW_EVENT_MASK_NB;
+ hwc->config = event->attr.config & event_mask;
hwc->idx = -1;
if (event->cpu < 0)
return 0;
}
+static umode_t
+amd_f17h_uncore_is_visible(struct kobject *kobj, struct attribute *attr, int i)
+{
+ return boot_cpu_data.x86 >= 0x17 && boot_cpu_data.x86 < 0x19 ?
+ attr->mode : 0;
+}
+
+static umode_t
+amd_f19h_uncore_is_visible(struct kobject *kobj, struct attribute *attr, int i)
+{
+ return boot_cpu_data.x86 >= 0x19 ? attr->mode : 0;
+}
+
static ssize_t amd_uncore_attr_show_cpumask(struct device *dev,
struct device_attribute *attr,
char *buf)
DEFINE_UNCORE_FORMAT_ATTR(event12, event, "config:0-7,32-35");
DEFINE_UNCORE_FORMAT_ATTR(event14, event, "config:0-7,32-35,59-60"); /* F17h+ DF */
+DEFINE_UNCORE_FORMAT_ATTR(event14v2, event, "config:0-7,32-37"); /* PerfMonV2 DF */
DEFINE_UNCORE_FORMAT_ATTR(event8, event, "config:0-7"); /* F17h+ L3 */
-DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(umask8, umask, "config:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(umask12, umask, "config:8-15,24-27"); /* PerfMonV2 DF */
DEFINE_UNCORE_FORMAT_ATTR(coreid, coreid, "config:42-44"); /* F19h L3 */
DEFINE_UNCORE_FORMAT_ATTR(slicemask, slicemask, "config:48-51"); /* F17h L3 */
DEFINE_UNCORE_FORMAT_ATTR(threadmask8, threadmask, "config:56-63"); /* F17h L3 */
DEFINE_UNCORE_FORMAT_ATTR(enallcores, enallcores, "config:47"); /* F19h L3 */
DEFINE_UNCORE_FORMAT_ATTR(sliceid, sliceid, "config:48-50"); /* F19h L3 */
+/* Common DF and NB attributes */
static struct attribute *amd_uncore_df_format_attr[] = {
- &format_attr_event12.attr, /* event14 if F17h+ */
- &format_attr_umask.attr,
+ &format_attr_event12.attr, /* event */
+ &format_attr_umask8.attr, /* umask */
NULL,
};
+/* Common L2 and L3 attributes */
static struct attribute *amd_uncore_l3_format_attr[] = {
- &format_attr_event12.attr, /* event8 if F17h+ */
- &format_attr_umask.attr,
- NULL, /* slicemask if F17h, coreid if F19h */
- NULL, /* threadmask8 if F17h, enallslices if F19h */
- NULL, /* enallcores if F19h */
- NULL, /* sliceid if F19h */
- NULL, /* threadmask2 if F19h */
+ &format_attr_event12.attr, /* event */
+ &format_attr_umask8.attr, /* umask */
+ NULL, /* threadmask */
+ NULL,
+};
+
+/* F17h unique L3 attributes */
+static struct attribute *amd_f17h_uncore_l3_format_attr[] = {
+ &format_attr_slicemask.attr, /* slicemask */
+ NULL,
+};
+
+/* F19h unique L3 attributes */
+static struct attribute *amd_f19h_uncore_l3_format_attr[] = {
+ &format_attr_coreid.attr, /* coreid */
+ &format_attr_enallslices.attr, /* enallslices */
+ &format_attr_enallcores.attr, /* enallcores */
+ &format_attr_sliceid.attr, /* sliceid */
NULL,
};
.attrs = amd_uncore_l3_format_attr,
};
+static struct attribute_group amd_f17h_uncore_l3_format_group = {
+ .name = "format",
+ .attrs = amd_f17h_uncore_l3_format_attr,
+ .is_visible = amd_f17h_uncore_is_visible,
+};
+
+static struct attribute_group amd_f19h_uncore_l3_format_group = {
+ .name = "format",
+ .attrs = amd_f19h_uncore_l3_format_attr,
+ .is_visible = amd_f19h_uncore_is_visible,
+};
+
static const struct attribute_group *amd_uncore_df_attr_groups[] = {
&amd_uncore_attr_group,
&amd_uncore_df_format_group,
NULL,
};
+static const struct attribute_group *amd_uncore_l3_attr_update[] = {
+ &amd_f17h_uncore_l3_format_group,
+ &amd_f19h_uncore_l3_format_group,
+ NULL,
+};
+
static struct pmu amd_nb_pmu = {
.task_ctx_nr = perf_invalid_context,
.attr_groups = amd_uncore_df_attr_groups,
static struct pmu amd_llc_pmu = {
.task_ctx_nr = perf_invalid_context,
.attr_groups = amd_uncore_l3_attr_groups,
+ .attr_update = amd_uncore_l3_attr_update,
.name = "amd_l2",
.event_init = amd_uncore_event_init,
.add = amd_uncore_add,
cpu_to_node(cpu));
}
+static inline struct perf_event **
+amd_uncore_events_alloc(unsigned int num, unsigned int cpu)
+{
+ return kzalloc_node(sizeof(struct perf_event *) * num, GFP_KERNEL,
+ cpu_to_node(cpu));
+}
+
static int amd_uncore_cpu_up_prepare(unsigned int cpu)
{
- struct amd_uncore *uncore_nb = NULL, *uncore_llc;
+ struct amd_uncore *uncore_nb = NULL, *uncore_llc = NULL;
if (amd_uncore_nb) {
+ *per_cpu_ptr(amd_uncore_nb, cpu) = NULL;
uncore_nb = amd_uncore_alloc(cpu);
if (!uncore_nb)
goto fail;
uncore_nb->msr_base = MSR_F15H_NB_PERF_CTL;
uncore_nb->active_mask = &amd_nb_active_mask;
uncore_nb->pmu = &amd_nb_pmu;
+ uncore_nb->events = amd_uncore_events_alloc(num_counters_nb, cpu);
+ if (!uncore_nb->events)
+ goto fail;
uncore_nb->id = -1;
*per_cpu_ptr(amd_uncore_nb, cpu) = uncore_nb;
}
if (amd_uncore_llc) {
+ *per_cpu_ptr(amd_uncore_llc, cpu) = NULL;
uncore_llc = amd_uncore_alloc(cpu);
if (!uncore_llc)
goto fail;
uncore_llc->msr_base = MSR_F16H_L2I_PERF_CTL;
uncore_llc->active_mask = &amd_llc_active_mask;
uncore_llc->pmu = &amd_llc_pmu;
+ uncore_llc->events = amd_uncore_events_alloc(num_counters_llc, cpu);
+ if (!uncore_llc->events)
+ goto fail;
uncore_llc->id = -1;
*per_cpu_ptr(amd_uncore_llc, cpu) = uncore_llc;
}
return 0;
fail:
- if (amd_uncore_nb)
- *per_cpu_ptr(amd_uncore_nb, cpu) = NULL;
- kfree(uncore_nb);
+ if (uncore_nb) {
+ kfree(uncore_nb->events);
+ kfree(uncore_nb);
+ }
+
+ if (uncore_llc) {
+ kfree(uncore_llc->events);
+ kfree(uncore_llc);
+ }
+
return -ENOMEM;
}
if (cpu == uncore->cpu)
cpumask_clear_cpu(cpu, uncore->active_mask);
- if (!--uncore->refcnt)
+ if (!--uncore->refcnt) {
+ kfree(uncore->events);
kfree(uncore);
+ }
+
*per_cpu_ptr(uncores, cpu) = NULL;
}
{
struct attribute **df_attr = amd_uncore_df_format_attr;
struct attribute **l3_attr = amd_uncore_l3_format_attr;
+ union cpuid_0x80000022_ebx ebx;
int ret = -ENODEV;
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD &&
if (!boot_cpu_has(X86_FEATURE_TOPOEXT))
return -ENODEV;
+ if (boot_cpu_has(X86_FEATURE_PERFMON_V2))
+ pmu_version = 2;
+
num_counters_nb = NUM_COUNTERS_NB;
num_counters_llc = NUM_COUNTERS_L2;
if (boot_cpu_data.x86 >= 0x17) {
}
if (boot_cpu_has(X86_FEATURE_PERFCTR_NB)) {
- if (boot_cpu_data.x86 >= 0x17)
+ if (pmu_version >= 2) {
+ *df_attr++ = &format_attr_event14v2.attr;
+ *df_attr++ = &format_attr_umask12.attr;
+ } else if (boot_cpu_data.x86 >= 0x17) {
*df_attr = &format_attr_event14.attr;
+ }
amd_uncore_nb = alloc_percpu(struct amd_uncore *);
if (!amd_uncore_nb) {
if (ret)
goto fail_nb;
+ if (pmu_version >= 2) {
+ ebx.full = cpuid_ebx(EXT_PERFMON_DEBUG_FEATURES);
+ num_counters_nb = ebx.split.num_df_pmc;
+ }
+
pr_info("%d %s %s counters detected\n", num_counters_nb,
boot_cpu_data.x86_vendor == X86_VENDOR_HYGON ? "HYGON" : "",
amd_nb_pmu.name);
if (boot_cpu_has(X86_FEATURE_PERFCTR_LLC)) {
if (boot_cpu_data.x86 >= 0x19) {
*l3_attr++ = &format_attr_event8.attr;
- *l3_attr++ = &format_attr_umask.attr;
- *l3_attr++ = &format_attr_coreid.attr;
- *l3_attr++ = &format_attr_enallslices.attr;
- *l3_attr++ = &format_attr_enallcores.attr;
- *l3_attr++ = &format_attr_sliceid.attr;
+ *l3_attr++ = &format_attr_umask8.attr;
*l3_attr++ = &format_attr_threadmask2.attr;
} else if (boot_cpu_data.x86 >= 0x17) {
*l3_attr++ = &format_attr_event8.attr;
- *l3_attr++ = &format_attr_umask.attr;
- *l3_attr++ = &format_attr_slicemask.attr;
+ *l3_attr++ = &format_attr_umask8.attr;
*l3_attr++ = &format_attr_threadmask8.attr;
}
{
struct event_constraint *c;
+ c = intel_get_event_constraints(cpuc, idx, event);
+
/*
* :ppp means to do reduced skid PEBS,
* which is available on PMC0 and fixed counter 0.
return &counter0_constraint;
}
- c = intel_get_event_constraints(cpuc, idx, event);
-
return c;
}
x86_pmu.flags |= PMU_FL_INSTR_LATENCY;
x86_pmu.flags |= PMU_FL_MEM_LOADS_AUX;
x86_pmu.lbr_pt_coexist = true;
- intel_pmu_pebs_data_source_skl(false);
+ intel_pmu_pebs_data_source_adl();
+ x86_pmu.pebs_latency_data = adl_latency_data_small;
x86_pmu.num_topdown_events = 8;
x86_pmu.update_topdown_event = adl_update_topdown_event;
x86_pmu.set_topdown_event_period = adl_set_topdown_event_period;
pebs_data_source[0x07] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
}
-void __init intel_pmu_pebs_data_source_skl(bool pmem)
+static void __init __intel_pmu_pebs_data_source_skl(bool pmem, u64 *data_source)
{
u64 pmem_or_l4 = pmem ? LEVEL(PMEM) : LEVEL(L4);
- pebs_data_source[0x08] = OP_LH | pmem_or_l4 | P(SNOOP, HIT);
- pebs_data_source[0x09] = OP_LH | pmem_or_l4 | REM | P(SNOOP, HIT);
- pebs_data_source[0x0b] = OP_LH | LEVEL(RAM) | REM | P(SNOOP, NONE);
- pebs_data_source[0x0c] = OP_LH | LEVEL(ANY_CACHE) | REM | P(SNOOPX, FWD);
- pebs_data_source[0x0d] = OP_LH | LEVEL(ANY_CACHE) | REM | P(SNOOP, HITM);
+ data_source[0x08] = OP_LH | pmem_or_l4 | P(SNOOP, HIT);
+ data_source[0x09] = OP_LH | pmem_or_l4 | REM | P(SNOOP, HIT);
+ data_source[0x0b] = OP_LH | LEVEL(RAM) | REM | P(SNOOP, NONE);
+ data_source[0x0c] = OP_LH | LEVEL(ANY_CACHE) | REM | P(SNOOPX, FWD);
+ data_source[0x0d] = OP_LH | LEVEL(ANY_CACHE) | REM | P(SNOOP, HITM);
+}
+
+void __init intel_pmu_pebs_data_source_skl(bool pmem)
+{
+ __intel_pmu_pebs_data_source_skl(pmem, pebs_data_source);
+}
+
+static void __init intel_pmu_pebs_data_source_grt(u64 *data_source)
+{
+ data_source[0x05] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
+ data_source[0x06] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
+ data_source[0x08] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOPX, FWD);
+}
+
+void __init intel_pmu_pebs_data_source_adl(void)
+{
+ u64 *data_source;
+
+ data_source = x86_pmu.hybrid_pmu[X86_HYBRID_PMU_CORE_IDX].pebs_data_source;
+ memcpy(data_source, pebs_data_source, sizeof(pebs_data_source));
+ __intel_pmu_pebs_data_source_skl(false, data_source);
+
+ data_source = x86_pmu.hybrid_pmu[X86_HYBRID_PMU_ATOM_IDX].pebs_data_source;
+ memcpy(data_source, pebs_data_source, sizeof(pebs_data_source));
+ intel_pmu_pebs_data_source_grt(data_source);
}
static u64 precise_store_data(u64 status)
return dse.val;
}
-static u64 load_latency_data(u64 status)
+static inline void pebs_set_tlb_lock(u64 *val, bool tlb, bool lock)
+{
+ /*
+ * TLB access
+ * 0 = did not miss 2nd level TLB
+ * 1 = missed 2nd level TLB
+ */
+ if (tlb)
+ *val |= P(TLB, MISS) | P(TLB, L2);
+ else
+ *val |= P(TLB, HIT) | P(TLB, L1) | P(TLB, L2);
+
+ /* locked prefix */
+ if (lock)
+ *val |= P(LOCK, LOCKED);
+}
+
+/* Retrieve the latency data for e-core of ADL */
+u64 adl_latency_data_small(struct perf_event *event, u64 status)
+{
+ union intel_x86_pebs_dse dse;
+ u64 val;
+
+ WARN_ON_ONCE(hybrid_pmu(event->pmu)->cpu_type == hybrid_big);
+
+ dse.val = status;
+
+ val = hybrid_var(event->pmu, pebs_data_source)[dse.ld_dse];
+
+ /*
+ * For the atom core on ADL,
+ * bit 4: lock, bit 5: TLB access.
+ */
+ pebs_set_tlb_lock(&val, dse.ld_locked, dse.ld_stlb_miss);
+
+ if (dse.ld_data_blk)
+ val |= P(BLK, DATA);
+ else
+ val |= P(BLK, NA);
+
+ return val;
+}
+
+static u64 load_latency_data(struct perf_event *event, u64 status)
{
union intel_x86_pebs_dse dse;
u64 val;
/*
* use the mapping table for bit 0-3
*/
- val = pebs_data_source[dse.ld_dse];
+ val = hybrid_var(event->pmu, pebs_data_source)[dse.ld_dse];
/*
* Nehalem models do not support TLB, Lock infos
val |= P(TLB, NA) | P(LOCK, NA);
return val;
}
- /*
- * bit 4: TLB access
- * 0 = did not miss 2nd level TLB
- * 1 = missed 2nd level TLB
- */
- if (dse.ld_stlb_miss)
- val |= P(TLB, MISS) | P(TLB, L2);
- else
- val |= P(TLB, HIT) | P(TLB, L1) | P(TLB, L2);
- /*
- * bit 5: locked prefix
- */
- if (dse.ld_locked)
- val |= P(LOCK, LOCKED);
+ pebs_set_tlb_lock(&val, dse.ld_stlb_miss, dse.ld_locked);
/*
* Ice Lake and earlier models do not support block infos.
return val;
}
-static u64 store_latency_data(u64 status)
+static u64 store_latency_data(struct perf_event *event, u64 status)
{
union intel_x86_pebs_dse dse;
u64 val;
/*
* use the mapping table for bit 0-3
*/
- val = pebs_data_source[dse.st_lat_dse];
+ val = hybrid_var(event->pmu, pebs_data_source)[dse.st_lat_dse];
- /*
- * bit 4: TLB access
- * 0 = did not miss 2nd level TLB
- * 1 = missed 2nd level TLB
- */
- if (dse.st_lat_stlb_miss)
- val |= P(TLB, MISS) | P(TLB, L2);
- else
- val |= P(TLB, HIT) | P(TLB, L1) | P(TLB, L2);
-
- /*
- * bit 5: locked prefix
- */
- if (dse.st_lat_locked)
- val |= P(LOCK, LOCKED);
+ pebs_set_tlb_lock(&val, dse.st_lat_stlb_miss, dse.st_lat_locked);
val |= P(BLK, NA);
struct event_constraint intel_grt_pebs_event_constraints[] = {
/* Allow all events as PEBS with no flags */
- INTEL_PLD_CONSTRAINT(0x5d0, 0xf),
- INTEL_PSD_CONSTRAINT(0x6d0, 0xf),
+ INTEL_HYBRID_LAT_CONSTRAINT(0x5d0, 0xf),
+ INTEL_HYBRID_LAT_CONSTRAINT(0x6d0, 0xf),
EVENT_CONSTRAINT_END
};
bool fst = fl & (PERF_X86_EVENT_PEBS_ST | PERF_X86_EVENT_PEBS_HSW_PREC);
if (fl & PERF_X86_EVENT_PEBS_LDLAT)
- val = load_latency_data(aux);
+ val = load_latency_data(event, aux);
else if (fl & PERF_X86_EVENT_PEBS_STLAT)
- val = store_latency_data(aux);
+ val = store_latency_data(event, aux);
+ else if (fl & PERF_X86_EVENT_PEBS_LAT_HYBRID)
+ val = x86_pmu.pebs_latency_data(event, aux);
else if (fst && (fl & PERF_X86_EVENT_PEBS_HSW_PREC))
val = precise_datala_hsw(event, aux);
else if (fst)
#define PERF_X86_EVENT_TOPDOWN 0x04000 /* Count Topdown slots/metrics events */
#define PERF_X86_EVENT_PEBS_STLAT 0x08000 /* st+stlat data address sampling */
#define PERF_X86_EVENT_AMD_BRS 0x10000 /* AMD Branch Sampling */
+#define PERF_X86_EVENT_PEBS_LAT_HYBRID 0x20000 /* ld and st lat for hybrid */
static inline bool is_topdown_count(struct perf_event *event)
{
PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER | \
PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR | \
PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_REGS_USER | \
- PERF_SAMPLE_PERIOD | PERF_SAMPLE_CODE_PAGE_SIZE)
+ PERF_SAMPLE_PERIOD | PERF_SAMPLE_CODE_PAGE_SIZE | \
+ PERF_SAMPLE_WEIGHT_TYPE)
#define PEBS_GP_REGS \
((1ULL << PERF_REG_X86_AX) | \
__EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS, \
HWEIGHT(n), 0, PERF_X86_EVENT_PEBS_ST)
+#define INTEL_HYBRID_LAT_CONSTRAINT(c, n) \
+ __EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS, \
+ HWEIGHT(n), 0, PERF_X86_EVENT_PEBS_LAT_HYBRID)
+
/* Event constraint, but match on all event flags too. */
#define INTEL_FLAGS_EVENT_CONSTRAINT(c, n) \
EVENT_CONSTRAINT(c, n, ARCH_PERFMON_EVENTSEL_EVENT|X86_ALL_EVENT_FLAGS)
x86_lbr_exclusive_max,
};
+#define PERF_PEBS_DATA_SOURCE_MAX 0x10
+
struct x86_hybrid_pmu {
struct pmu pmu;
const char *name;
unsigned int late_ack :1,
mid_ack :1,
enabled_ack :1;
+
+ u64 pebs_data_source[PERF_PEBS_DATA_SOURCE_MAX];
};
static __always_inline struct x86_hybrid_pmu *hybrid_pmu(struct pmu *pmu)
void (*drain_pebs)(struct pt_regs *regs, struct perf_sample_data *data);
struct event_constraint *pebs_constraints;
void (*pebs_aliases)(struct perf_event *event);
+ u64 (*pebs_latency_data)(struct perf_event *event, u64 status);
unsigned long large_pebs_flags;
u64 rtm_abort_event;
int intel_pmu_drain_bts_buffer(void);
+u64 adl_latency_data_small(struct perf_event *event, u64 status);
+
extern struct event_constraint intel_core2_pebs_event_constraints[];
extern struct event_constraint intel_atom_pebs_event_constraints[];
void intel_pmu_pebs_data_source_skl(bool pmem);
+void intel_pmu_pebs_data_source_adl(void);
+
int intel_pmu_setup_lbr_filter(struct perf_event *event);
void intel_pt_interrupt(void);
struct pci_dev *dev;
struct hv_interrupt_entry out_entry, *stored_entry;
struct irq_cfg *cfg = irqd_cfg(data);
- cpumask_t *affinity;
+ const cpumask_t *affinity;
int cpu;
u64 status;
rand_en:1, /* 57: random tagging enable */
fetch_l2_miss:1,/* 58: L2 miss for sampled fetch
* (needs IbsFetchComp) */
- reserved:5; /* 59-63: reserved */
+ l3_miss_only:1, /* 59: Collect L3 miss samples only */
+ fetch_oc_miss:1,/* 60: Op cache miss for the sampled fetch */
+ fetch_l3_miss:1,/* 61: L3 cache miss for the sampled fetch */
+ reserved:2; /* 62-63: reserved */
};
};
__u64 val;
struct {
__u64 opmaxcnt:16, /* 0-15: periodic op max. count */
- reserved0:1, /* 16: reserved */
+ l3_miss_only:1, /* 16: Collect L3 miss samples only */
op_en:1, /* 17: op sampling enable */
op_val:1, /* 18: op sample valid */
cnt_ctl:1, /* 19: periodic op counter control */
opmaxcnt_ext:7, /* 20-26: upper 7 bits of periodic op maximum count */
- reserved1:5, /* 27-31: reserved */
+ reserved0:5, /* 27-31: reserved */
opcurcnt:27, /* 32-58: periodic op counter current count */
- reserved2:5; /* 59-63: reserved */
+ reserved1:5; /* 59-63: reserved */
};
};
union ibs_op_data2 {
__u64 val;
struct {
- __u64 data_src:3, /* 0-2: data source */
+ __u64 data_src_lo:3, /* 0-2: data source low */
reserved0:1, /* 3: reserved */
rmt_node:1, /* 4: destination node */
cache_hit_st:1, /* 5: cache hit state */
- reserved1:57; /* 5-63: reserved */
+ data_src_hi:2, /* 6-7: data source high */
+ reserved1:56; /* 8-63: reserved */
};
};
#define X86_FEATURE_IBRS ( 7*32+25) /* Indirect Branch Restricted Speculation */
#define X86_FEATURE_IBPB ( 7*32+26) /* Indirect Branch Prediction Barrier */
#define X86_FEATURE_STIBP ( 7*32+27) /* Single Thread Indirect Branch Predictors */
-#define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 or above (Zen) */
+#define X86_FEATURE_ZEN (7*32+28) /* "" CPU based on Zen microarchitecture */
#define X86_FEATURE_L1TF_PTEINV ( 7*32+29) /* "" L1TF workaround PTE inversion */
#define X86_FEATURE_IBRS_ENHANCED ( 7*32+30) /* Enhanced IBRS */
#define X86_FEATURE_MSR_IA32_FEAT_CTL ( 7*32+31) /* "" MSR IA32_FEAT_CTL configured */
/* prctl */
extern long fpu_xstate_prctl(int option, unsigned long arg2);
+extern void fpu_idle_fpregs(void);
+
#endif /* _ASM_X86_FPU_API_H */
#define MWAIT_SUBSTATE_SIZE 4
#define MWAIT_HINT2CSTATE(hint) (((hint) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK)
#define MWAIT_HINT2SUBSTATE(hint) ((hint) & MWAIT_CSTATE_MASK)
+#define MWAIT_C1_SUBSTATE_MASK 0xf0
#define CPUID_MWAIT_LEAF 5
#define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1
#endif
.endm
+/*
+ * Equivalent to -mindirect-branch-cs-prefix; emit the 5 byte jmp/call
+ * to the retpoline thunk with a CS prefix when the register requires
+ * a RAX prefix byte to encode. Also see apply_retpolines().
+ */
+.macro __CS_PREFIX reg:req
+ .irp rs,r8,r9,r10,r11,r12,r13,r14,r15
+ .ifc \reg,\rs
+ .byte 0x2e
+ .endif
+ .endr
+.endm
+
/*
* JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
* indirect jmp/call which may be susceptible to the Spectre variant 2
*/
.macro JMP_NOSPEC reg:req
#ifdef CONFIG_RETPOLINE
- ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
- __stringify(jmp __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
- __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_LFENCE
+ __CS_PREFIX \reg
+ jmp __x86_indirect_thunk_\reg
#else
jmp *%\reg
+ int3
#endif
.endm
.macro CALL_NOSPEC reg:req
#ifdef CONFIG_RETPOLINE
- ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
- __stringify(call __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
- __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_LFENCE
+ __CS_PREFIX \reg
+ call __x86_indirect_thunk_\reg
#else
call *%\reg
#endif
#define AMD64_RAW_EVENT_MASK_NB \
(AMD64_EVENTSEL_EVENT | \
ARCH_PERFMON_EVENTSEL_UMASK)
+
+#define AMD64_PERFMON_V2_EVENTSEL_EVENT_NB \
+ (AMD64_EVENTSEL_EVENT | \
+ GENMASK_ULL(37, 36))
+
+#define AMD64_PERFMON_V2_EVENTSEL_UMASK_NB \
+ (ARCH_PERFMON_EVENTSEL_UMASK | \
+ GENMASK_ULL(27, 24))
+
+#define AMD64_PERFMON_V2_RAW_EVENT_MASK_NB \
+ (AMD64_PERFMON_V2_EVENTSEL_EVENT_NB | \
+ AMD64_PERFMON_V2_EVENTSEL_UMASK_NB)
+
#define AMD64_NUM_COUNTERS 4
#define AMD64_NUM_COUNTERS_CORE 6
#define AMD64_NUM_COUNTERS_NB 4
struct {
/* Number of Core Performance Counters */
unsigned int num_core_pmc:4;
+ unsigned int reserved:6;
+ /* Number of Data Fabric Counters */
+ unsigned int num_df_pmc:6;
} split;
unsigned int full;
};
struct real_mode_header;
enum stack_type;
-struct ghcb;
/* Early IDT entry points for #VC handler */
extern void vc_no_ghcb(void);
__sev_es_nmi_complete();
}
extern int __init sev_es_efi_map_ghcbs(pgd_t *pgd);
-extern enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
- bool set_ghcb_msr,
- struct es_em_ctxt *ctxt,
- u64 exit_code, u64 exit_info_1,
- u64 exit_info_2);
+
static inline int rmpadjust(unsigned long vaddr, bool rmp_psize, unsigned long attrs)
{
int rc;
return 0;
}
+static inline void tile_release(void)
+{
+ /*
+ * Instruction opcode for TILERELEASE; supported in binutils
+ * version >= 2.36.
+ */
+ asm volatile(".byte 0xc4, 0xe2, 0x78, 0x49, 0xc0");
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_X86_SPECIAL_INSNS_H */
void __flush_tlb_all(void);
#define TLB_FLUSH_ALL -1UL
+#define TLB_GENERATION_INVALID 0
void cr4_update_irqsoff(unsigned long set, unsigned long clear);
unsigned long cr4_read_shadow(void);
#define SETUP_APPLE_PROPERTIES 5
#define SETUP_JAILHOUSE 6
#define SETUP_CC_BLOB 7
+#define SETUP_IMA 8
+#define SETUP_RNG_SEED 9
+#define SETUP_ENUM_MAX SETUP_RNG_SEED
#define SETUP_INDIRECT (1<<31)
-
-/* SETUP_INDIRECT | max(SETUP_*) */
-#define SETUP_TYPE_MAX (SETUP_INDIRECT | SETUP_CC_BLOB)
+#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)
/* ram_size flags */
#define RAMDISK_IMAGE_START_MASK 0x07FF
} __attribute__((packed)) v2;
} __attribute__((packed));
+/*
+ * IMA buffer setup data information from the previous kernel during kexec
+ */
+struct ima_setup_data {
+ __u64 addr;
+ __u64 size;
+} __attribute__((packed));
+
/* The so-called "zeropage" */
struct boot_params {
struct screen_info screen_info; /* 0x000 */
# by several compilation units. To be safe, disable all instrumentation.
KCSAN_SANITIZE := n
-OBJECT_FILES_NON_STANDARD_test_nx.o := y
-
# If instrumentation of this dir is enabled, boot hangs during first second.
# Probably could be more selective here, but note that files related to irqs,
# boot, dumpstack/stacktrace, etc are either non-interesting or can lead to
#define PCI_DEVICE_ID_AMD_17H_M10H_ROOT 0x15d0
#define PCI_DEVICE_ID_AMD_17H_M30H_ROOT 0x1480
#define PCI_DEVICE_ID_AMD_17H_M60H_ROOT 0x1630
+#define PCI_DEVICE_ID_AMD_17H_MA0H_ROOT 0x14b5
#define PCI_DEVICE_ID_AMD_19H_M10H_ROOT 0x14a4
+#define PCI_DEVICE_ID_AMD_19H_M60H_ROOT 0x14d8
+#define PCI_DEVICE_ID_AMD_19H_M70H_ROOT 0x14e8
#define PCI_DEVICE_ID_AMD_17H_DF_F4 0x1464
#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F4 0x144c
#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
+#define PCI_DEVICE_ID_AMD_17H_MA0H_DF_F4 0x1728
#define PCI_DEVICE_ID_AMD_19H_DF_F4 0x1654
#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F4 0x14b1
#define PCI_DEVICE_ID_AMD_19H_M40H_ROOT 0x14b5
#define PCI_DEVICE_ID_AMD_19H_M40H_DF_F4 0x167d
#define PCI_DEVICE_ID_AMD_19H_M50H_DF_F4 0x166e
+#define PCI_DEVICE_ID_AMD_19H_M60H_DF_F4 0x14e4
+#define PCI_DEVICE_ID_AMD_19H_M70H_DF_F4 0x14f4
/* Protect the PCI config register pairs used for SMN. */
static DEFINE_MUTEX(smn_mutex);
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_ROOT) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_ROOT) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_MA0H_ROOT) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_ROOT) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_ROOT) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M60H_ROOT) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M70H_ROOT) },
{}
};
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) },
{}
};
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F4) },
* enable IBRS around firmware calls.
*/
if (boot_cpu_has_bug(X86_BUG_RETBLEED) &&
+ boot_cpu_has(X86_FEATURE_IBPB) &&
(boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)) {
unsigned int l1, l2;
rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
- if (!(l1 & (1<<11)))
+ if (!(l1 & MSR_IA32_MISC_ENABLE_BTS_UNAVAIL))
set_cpu_cap(c, X86_FEATURE_BTS);
- if (!(l1 & (1<<12)))
+ if (!(l1 & MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL))
set_cpu_cap(c, X86_FEATURE_PEBS);
}
#include "internal.h"
+static bool hw_injection_possible = true;
+
/*
* Collect all the MCi_XXX settings
*/
for (i = 0; i < N_INJ_TYPES; i++) {
if (!strncmp(flags_options[i], buf, strlen(flags_options[i]))) {
+ if (i > SW_INJ && !hw_injection_possible)
+ continue;
inj_type = i;
return 0;
}
&i_mce, dfs_fls[i].fops);
}
+static void check_hw_inj_possible(void)
+{
+ int cpu;
+ u8 bank;
+
+ /*
+ * This behavior exists only on SMCA systems though its not directly
+ * related to SMCA.
+ */
+ if (!cpu_feature_enabled(X86_FEATURE_SMCA))
+ return;
+
+ cpu = get_cpu();
+
+ for (bank = 0; bank < MAX_NR_BANKS; ++bank) {
+ u64 status = MCI_STATUS_VAL, ipid;
+
+ /* Check whether bank is populated */
+ rdmsrl(MSR_AMD64_SMCA_MCx_IPID(bank), ipid);
+ if (!ipid)
+ continue;
+
+ toggle_hw_mce_inject(cpu, true);
+
+ wrmsrl_safe(mca_msr_reg(bank, MCA_STATUS), status);
+ rdmsrl_safe(mca_msr_reg(bank, MCA_STATUS), &status);
+
+ if (!status) {
+ hw_injection_possible = false;
+ pr_warn("Platform does not allow *hardware* error injection."
+ "Try using APEI EINJ instead.\n");
+ }
+
+ toggle_hw_mce_inject(cpu, false);
+
+ break;
+ }
+
+ put_cpu();
+}
+
static int __init inject_init(void)
{
if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
return -ENOMEM;
+ check_hw_inj_possible();
+
debugfs_init();
register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0, "mce_notify");
static __always_inline u32 mca_msr_reg(int bank, enum mca_msr reg)
{
- if (mce_flags.smca) {
+ if (cpu_feature_enabled(X86_FEATURE_SMCA)) {
switch (reg) {
case MCA_CTL: return MSR_AMD64_SMCA_MCx_CTL(bank);
case MCA_ADDR: return MSR_AMD64_SMCA_MCx_ADDR(bank);
{
uint32_t eax, ebx, ecx, edx;
VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
- return (eax & (1 << VMWARE_CMD_VCPU_RESERVED)) == 0 &&
- (eax & (1 << VMWARE_CMD_LEGACY_X2APIC)) != 0;
+ return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
+ (eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
}
#ifdef CONFIG_AMD_MEM_ENCRYPT
e820__range_update(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
/*
- * SETUP_EFI is supplied by kexec and does not need to be
- * reserved.
+ * SETUP_EFI and SETUP_IMA are supplied by kexec and do not need
+ * to be reserved.
*/
- if (data->type != SETUP_EFI)
+ if (data->type != SETUP_EFI && data->type != SETUP_IMA)
e820__range_update_kexec(pa_data,
sizeof(*data) + data->len,
E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
*/
return 0;
}
+
+/*
+ * Initialize register state that may prevent from entering low-power idle.
+ * This function will be invoked from the cpuidle driver only when needed.
+ */
+void fpu_idle_fpregs(void)
+{
+ /* Note: AMX_TILE being enabled implies XGETBV1 support */
+ if (cpu_feature_enabled(X86_FEATURE_AMX_TILE) &&
+ (xfeatures_in_use() & XFEATURE_MASK_XTILE)) {
+ tile_release();
+ fpregs_deactivate(¤t->thread.fpu);
+ }
+}
text_poke_finish();
mutex_unlock(&text_mutex);
}
-
-static enum {
- JL_STATE_START,
- JL_STATE_NO_UPDATE,
- JL_STATE_UPDATE,
-} jlstate __initdata_or_module = JL_STATE_START;
-
-__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
-{
- if (jlstate == JL_STATE_UPDATE)
- jump_label_transform(entry, type, 1);
-}
#include <linux/mm.h>
#include <linux/efi.h>
#include <linux/verification.h>
+#include <linux/random.h>
#include <asm/bootparam.h>
#include <asm/setup.h>
return 0;
}
+enum { RNG_SEED_LENGTH = 32 };
+
+static void
+setup_rng_seed(struct boot_params *params, unsigned long params_load_addr,
+ unsigned int rng_seed_setup_data_offset)
+{
+ struct setup_data *sd = (void *)params + rng_seed_setup_data_offset;
+ unsigned long setup_data_phys;
+
+ if (!rng_is_initialized())
+ return;
+
+ sd->type = SETUP_RNG_SEED;
+ sd->len = RNG_SEED_LENGTH;
+ get_random_bytes(sd->data, RNG_SEED_LENGTH);
+ setup_data_phys = params_load_addr + rng_seed_setup_data_offset;
+ sd->next = params->hdr.setup_data;
+ params->hdr.setup_data = setup_data_phys;
+}
+
#ifdef CONFIG_EFI
static int setup_efi_info_memmap(struct boot_params *params,
unsigned long params_load_addr,
}
#endif /* CONFIG_EFI */
+static void
+setup_ima_state(const struct kimage *image, struct boot_params *params,
+ unsigned long params_load_addr,
+ unsigned int ima_setup_data_offset)
+{
+#ifdef CONFIG_IMA_KEXEC
+ struct setup_data *sd = (void *)params + ima_setup_data_offset;
+ unsigned long setup_data_phys;
+ struct ima_setup_data *ima;
+
+ if (!image->ima_buffer_size)
+ return;
+
+ sd->type = SETUP_IMA;
+ sd->len = sizeof(*ima);
+
+ ima = (void *)sd + sizeof(struct setup_data);
+ ima->addr = image->ima_buffer_addr;
+ ima->size = image->ima_buffer_size;
+
+ /* Add setup data */
+ setup_data_phys = params_load_addr + ima_setup_data_offset;
+ sd->next = params->hdr.setup_data;
+ params->hdr.setup_data = setup_data_phys;
+#endif /* CONFIG_IMA_KEXEC */
+}
+
static int
setup_boot_parameters(struct kimage *image, struct boot_params *params,
unsigned long params_load_addr,
unsigned int efi_map_offset, unsigned int efi_map_sz,
- unsigned int efi_setup_data_offset)
+ unsigned int setup_data_offset)
{
unsigned int nr_e820_entries;
unsigned long long mem_k, start, end;
#ifdef CONFIG_EFI
/* Setup EFI state */
setup_efi_state(params, params_load_addr, efi_map_offset, efi_map_sz,
- efi_setup_data_offset);
+ setup_data_offset);
+ setup_data_offset += sizeof(struct setup_data) +
+ sizeof(struct efi_setup_data);
#endif
+
+ if (IS_ENABLED(CONFIG_IMA_KEXEC)) {
+ /* Setup IMA log buffer state */
+ setup_ima_state(image, params, params_load_addr,
+ setup_data_offset);
+ setup_data_offset += sizeof(struct setup_data) +
+ sizeof(struct ima_setup_data);
+ }
+
+ /* Setup RNG seed */
+ setup_rng_seed(params, params_load_addr, setup_data_offset);
+
/* Setup EDD info */
memcpy(params->eddbuf, boot_params.eddbuf,
EDDMAXNR * sizeof(struct edd_info));
params_cmdline_sz = ALIGN(params_cmdline_sz, 16);
kbuf.bufsz = params_cmdline_sz + ALIGN(efi_map_sz, 16) +
sizeof(struct setup_data) +
- sizeof(struct efi_setup_data);
+ sizeof(struct efi_setup_data) +
+ sizeof(struct setup_data) +
+ RNG_SEED_LENGTH;
+
+ if (IS_ENABLED(CONFIG_IMA_KEXEC))
+ kbuf.bufsz += sizeof(struct setup_data) +
+ sizeof(struct ima_setup_data);
params = kzalloc(kbuf.bufsz, GFP_KERNEL);
if (!params)
tseg, tseg + text->sh_size);
}
- /* make jump label nops */
- jump_label_apply_nops(me);
-
if (orc && orc_ip)
unwind_module_init(me, (void *)orc_ip->sh_addr, orc_ip->sh_size,
(void *)orc->sh_addr, orc->sh_size);
* simply here to trigger the module to load on demand.
*/
pdev = platform_device_alloc("e820_pmem", -1);
- return platform_device_add(pdev);
+
+ rc = platform_device_add(pdev);
+ if (rc)
+ platform_device_put(pdev);
+
+ return rc;
}
device_initcall(register_e820_pmem);
}
/*
- * Intel Core2 and older machines prefer MWAIT over HALT for C1.
- * We can't rely on cpuidle installing MWAIT, because it will not load
- * on systems that support only C1 -- so the boot default must be MWAIT.
+ * Prefer MWAIT over HALT if MWAIT is supported, MWAIT_CPUID leaf
+ * exists and whenever MONITOR/MWAIT extensions are present there is at
+ * least one C1 substate.
*
- * Some AMD machines are the opposite, they depend on using HALT.
- *
- * So for default C1, which is used during boot until cpuidle loads,
- * use MWAIT-C1 on Intel HW that has it, else use HALT.
+ * Do not prefer MWAIT if MONITOR instruction has a bug or idle=nomwait
+ * is passed to kernel commandline parameter.
*/
static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
{
- if (c->x86_vendor != X86_VENDOR_INTEL)
+ u32 eax, ebx, ecx, edx;
+
+ /* User has disallowed the use of MWAIT. Fallback to HALT */
+ if (boot_option_idle_override == IDLE_NOMWAIT)
return 0;
- if (!cpu_has(c, X86_FEATURE_MWAIT) || boot_cpu_has_bug(X86_BUG_MONITOR))
+ /* MWAIT is not supported on this platform. Fallback to HALT */
+ if (!cpu_has(c, X86_FEATURE_MWAIT))
return 0;
- return 1;
+ /* Monitor has a bug. Fallback to HALT */
+ if (boot_cpu_has_bug(X86_BUG_MONITOR))
+ return 0;
+
+ cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+ /*
+ * If MWAIT extensions are not available, it is safe to use MWAIT
+ * with EAX=0, ECX=0.
+ */
+ if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED))
+ return 1;
+
+ /*
+ * If MWAIT extensions are available, there should be at least one
+ * MWAIT C1 substate present.
+ */
+ return (edx & MWAIT_C1_SUBSTATE_MASK);
}
/*
} else if (!strcmp(str, "nomwait")) {
/*
* If the boot option of "idle=nomwait" is added,
- * it means that mwait will be disabled for CPU C2/C3
- * states. In such case it won't touch the variable
- * of boot_option_idle_override.
+ * it means that mwait will be disabled for CPU C1/C2/C3
+ * states.
*/
boot_option_idle_override = IDLE_NOMWAIT;
} else
#include <linux/dma-map-ops.h>
#include <linux/dmi.h>
#include <linux/efi.h>
+#include <linux/ima.h>
#include <linux/init_ohci1394_dma.h>
#include <linux/initrd.h>
#include <linux/iscsi_ibft.h>
#include <linux/usb/xhci-dbgp.h>
#include <linux/static_call.h>
#include <linux/swiotlb.h>
+#include <linux/random.h>
#include <uapi/linux/mount.h>
__visible unsigned long mmu_cr4_features __ro_after_init = X86_CR4_PAE;
#endif
+#ifdef CONFIG_IMA
+static phys_addr_t ima_kexec_buffer_phys;
+static size_t ima_kexec_buffer_size;
+#endif
+
/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
int bootloader_type, bootloader_version;
}
#endif /* CONFIG_BLK_DEV_INITRD */
+static void __init add_early_ima_buffer(u64 phys_addr)
+{
+#ifdef CONFIG_IMA
+ struct ima_setup_data *data;
+
+ data = early_memremap(phys_addr + sizeof(struct setup_data), sizeof(*data));
+ if (!data) {
+ pr_warn("setup: failed to memremap ima_setup_data entry\n");
+ return;
+ }
+
+ if (data->size) {
+ memblock_reserve(data->addr, data->size);
+ ima_kexec_buffer_phys = data->addr;
+ ima_kexec_buffer_size = data->size;
+ }
+
+ early_memunmap(data, sizeof(*data));
+#else
+ pr_warn("Passed IMA kexec data, but CONFIG_IMA not set. Ignoring.\n");
+#endif
+}
+
+#if defined(CONFIG_HAVE_IMA_KEXEC) && !defined(CONFIG_OF_FLATTREE)
+int __init ima_free_kexec_buffer(void)
+{
+ int rc;
+
+ if (!ima_kexec_buffer_size)
+ return -ENOENT;
+
+ rc = memblock_phys_free(ima_kexec_buffer_phys,
+ ima_kexec_buffer_size);
+ if (rc)
+ return rc;
+
+ ima_kexec_buffer_phys = 0;
+ ima_kexec_buffer_size = 0;
+
+ return 0;
+}
+
+int __init ima_get_kexec_buffer(void **addr, size_t *size)
+{
+ if (!ima_kexec_buffer_size)
+ return -ENOENT;
+
+ *addr = __va(ima_kexec_buffer_phys);
+ *size = ima_kexec_buffer_size;
+
+ return 0;
+}
+#endif
+
static void __init parse_setup_data(void)
{
struct setup_data *data;
case SETUP_EFI:
parse_efi_setup(pa_data, data_len);
break;
+ case SETUP_IMA:
+ add_early_ima_buffer(pa_data);
+ break;
+ case SETUP_RNG_SEED:
+ data = early_memremap(pa_data, data_len);
+ add_bootloader_randomness(data->data, data->len);
+ /* Zero seed for forward secrecy. */
+ memzero_explicit(data->data, data->len);
+ /* Zero length in case we find ourselves back here by accident. */
+ memzero_explicit(&data->len, sizeof(data->len));
+ early_memunmap(data, data_len);
+ break;
default:
break;
}
return ES_VMM_ERROR;
}
-enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb, bool set_ghcb_msr,
- struct es_em_ctxt *ctxt, u64 exit_code,
- u64 exit_info_1, u64 exit_info_2)
+static enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
+ struct es_em_ctxt *ctxt,
+ u64 exit_code, u64 exit_info_1,
+ u64 exit_info_2)
{
/* Fill in protocol and format specifiers */
ghcb->protocol_version = ghcb_version;
ghcb_set_sw_exit_info_1(ghcb, exit_info_1);
ghcb_set_sw_exit_info_2(ghcb, exit_info_2);
- /*
- * Hyper-V unenlightened guests use a paravisor for communicating and
- * GHCB pages are being allocated and set up by that paravisor. Linux
- * should not change the GHCB page's physical address.
- */
- if (set_ghcb_msr)
- sev_es_wr_ghcb_msr(__pa(ghcb));
-
+ sev_es_wr_ghcb_msr(__pa(ghcb));
VMGEXIT();
return verify_exception_info(ghcb, ctxt);
*/
sw_scratch = __pa(ghcb) + offsetof(struct ghcb, shared_buffer);
ghcb_set_sw_scratch(ghcb, sw_scratch);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_IOIO,
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_IOIO,
exit_info_1, exit_info_2);
if (ret != ES_OK)
return ret;
ghcb_set_rax(ghcb, rax);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt,
- SVM_EXIT_IOIO, exit_info_1, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_IOIO, exit_info_1, 0);
if (ret != ES_OK)
return ret;
/* xgetbv will cause #GP - use reset value for xcr0 */
ghcb_set_xcr0(ghcb, 1);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_CPUID, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_CPUID, 0, 0);
if (ret != ES_OK)
return ret;
bool rdtscp = (exit_code == SVM_EXIT_RDTSCP);
enum es_result ret;
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, exit_code, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, exit_code, 0, 0);
if (ret != ES_OK)
return ret;
ghcb_set_sw_scratch(ghcb, (u64)__pa(data));
/* This will advance the shared buffer data points to. */
- ret = sev_es_ghcb_hv_call(ghcb, true, &ctxt, SVM_VMGEXIT_PSC, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, &ctxt, SVM_VMGEXIT_PSC, 0, 0);
/*
* Page State Change VMGEXIT can pass error code through
ghcb_set_rdx(ghcb, regs->dx);
}
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_MSR,
- exit_info_1, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_MSR, exit_info_1, 0);
if ((ret == ES_OK) && (!exit_info_1)) {
regs->ax = ghcb->save.rax;
ghcb_set_sw_scratch(ghcb, ghcb_pa + offsetof(struct ghcb, shared_buffer));
- return sev_es_ghcb_hv_call(ghcb, true, ctxt, exit_code, exit_info_1, exit_info_2);
+ return sev_es_ghcb_hv_call(ghcb, ctxt, exit_code, exit_info_1, exit_info_2);
}
/*
/* Using a value of 0 for ExitInfo1 means RAX holds the value */
ghcb_set_rax(ghcb, val);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_WRITE_DR7, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_WRITE_DR7, 0, 0);
if (ret != ES_OK)
return ret;
static enum es_result vc_handle_wbinvd(struct ghcb *ghcb,
struct es_em_ctxt *ctxt)
{
- return sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_WBINVD, 0, 0);
+ return sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_WBINVD, 0, 0);
}
static enum es_result vc_handle_rdpmc(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
ghcb_set_rcx(ghcb, ctxt->regs->cx);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_RDPMC, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_RDPMC, 0, 0);
if (ret != ES_OK)
return ret;
if (x86_platform.hyper.sev_es_hcall_prepare)
x86_platform.hyper.sev_es_hcall_prepare(ghcb, ctxt->regs);
- ret = sev_es_ghcb_hv_call(ghcb, true, ctxt, SVM_EXIT_VMMCALL, 0, 0);
+ ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_VMMCALL, 0, 0);
if (ret != ES_OK)
return ret;
ghcb_set_rbx(ghcb, input->data_npages);
}
- ret = sev_es_ghcb_hv_call(ghcb, true, &ctxt, exit_code, input->req_gpa, input->resp_gpa);
+ ret = sev_es_ghcb_hv_call(ghcb, &ctxt, exit_code, input->req_gpa, input->resp_gpa);
if (ret)
goto e_put;
static bool ex_handler_msr(const struct exception_table_entry *fixup,
struct pt_regs *regs, bool wrmsr, bool safe, int reg)
{
- if (!safe && wrmsr &&
- pr_warn_once("unchecked MSR access error: WRMSR to 0x%x (tried to write 0x%08x%08x) at rIP: 0x%lx (%pS)\n",
- (unsigned int)regs->cx, (unsigned int)regs->dx,
- (unsigned int)regs->ax, regs->ip, (void *)regs->ip))
+ if (__ONCE_LITE_IF(!safe && wrmsr)) {
+ pr_warn("unchecked MSR access error: WRMSR to 0x%x (tried to write 0x%08x%08x) at rIP: 0x%lx (%pS)\n",
+ (unsigned int)regs->cx, (unsigned int)regs->dx,
+ (unsigned int)regs->ax, regs->ip, (void *)regs->ip);
show_stack_regs(regs);
+ }
- if (!safe && !wrmsr &&
- pr_warn_once("unchecked MSR access error: RDMSR from 0x%x at rIP: 0x%lx (%pS)\n",
- (unsigned int)regs->cx, regs->ip, (void *)regs->ip))
+ if (__ONCE_LITE_IF(!safe && !wrmsr)) {
+ pr_warn("unchecked MSR access error: RDMSR from 0x%x at rIP: 0x%lx (%pS)\n",
+ (unsigned int)regs->cx, regs->ip, (void *)regs->ip);
show_stack_regs(regs);
+ }
if (!wrmsr) {
/* Pretend that the read succeeded and returned 0. */
/*
* This must follow RAM test, since System RAM is considered a
- * restricted resource under CONFIG_STRICT_IOMEM.
+ * restricted resource under CONFIG_STRICT_DEVMEM.
*/
if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) {
/* Low 1MB bypasses iomem restrictions. */
return vma_pkey(vma);
}
-#define PKRU_AD_KEY(pkey) (PKRU_AD_BIT << ((pkey) * PKRU_BITS_PER_PKEY))
+#define PKRU_AD_MASK(pkey) (PKRU_AD_BIT << ((pkey) * PKRU_BITS_PER_PKEY))
/*
* Make the default PKRU value (at execve() time) as restrictive
* in the process's lifetime will not accidentally get access
* to data which is pkey-protected later on.
*/
-u32 init_pkru_value = PKRU_AD_KEY( 1) | PKRU_AD_KEY( 2) | PKRU_AD_KEY( 3) |
- PKRU_AD_KEY( 4) | PKRU_AD_KEY( 5) | PKRU_AD_KEY( 6) |
- PKRU_AD_KEY( 7) | PKRU_AD_KEY( 8) | PKRU_AD_KEY( 9) |
- PKRU_AD_KEY(10) | PKRU_AD_KEY(11) | PKRU_AD_KEY(12) |
- PKRU_AD_KEY(13) | PKRU_AD_KEY(14) | PKRU_AD_KEY(15);
+u32 init_pkru_value = PKRU_AD_MASK( 1) | PKRU_AD_MASK( 2) |
+ PKRU_AD_MASK( 3) | PKRU_AD_MASK( 4) |
+ PKRU_AD_MASK( 5) | PKRU_AD_MASK( 6) |
+ PKRU_AD_MASK( 7) | PKRU_AD_MASK( 8) |
+ PKRU_AD_MASK( 9) | PKRU_AD_MASK(10) |
+ PKRU_AD_MASK(11) | PKRU_AD_MASK(12) |
+ PKRU_AD_MASK(13) | PKRU_AD_MASK(14) |
+ PKRU_AD_MASK(15);
static ssize_t init_pkru_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
const struct flush_tlb_info *f = info;
struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
- u64 mm_tlb_gen = atomic64_read(&loaded_mm->context.tlb_gen);
u64 local_tlb_gen = this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen);
bool local = smp_processor_id() == f->initiating_cpu;
unsigned long nr_invalidate = 0;
+ u64 mm_tlb_gen;
/* This code cannot presently handle being reentered. */
VM_WARN_ON(!irqs_disabled());
return;
}
+ if (unlikely(f->new_tlb_gen != TLB_GENERATION_INVALID &&
+ f->new_tlb_gen <= local_tlb_gen)) {
+ /*
+ * The TLB is already up to date in respect to f->new_tlb_gen.
+ * While the core might be still behind mm_tlb_gen, checking
+ * mm_tlb_gen unnecessarily would have negative caching effects
+ * so avoid it.
+ */
+ return;
+ }
+
+ /*
+ * Defer mm_tlb_gen reading as long as possible to avoid cache
+ * contention.
+ */
+ mm_tlb_gen = atomic64_read(&loaded_mm->context.tlb_gen);
+
if (unlikely(local_tlb_gen == mm_tlb_gen)) {
/*
* There's nothing to do: we're already up to date. This can
/* Partial flush */
unsigned long addr = f->start;
+ /* Partial flush cannot have invalid generations */
+ VM_WARN_ON(f->new_tlb_gen == TLB_GENERATION_INVALID);
+
+ /* Partial flush must have valid mm */
+ VM_WARN_ON(f->mm == NULL);
+
nr_invalidate = (f->end - f->start) >> f->stride_shift;
while (addr < f->end) {
struct flush_tlb_info *info;
preempt_disable();
- info = get_flush_tlb_info(NULL, start, end, 0, false, 0);
+ info = get_flush_tlb_info(NULL, start, end, 0, false,
+ TLB_GENERATION_INVALID);
on_each_cpu(do_kernel_range_flush, info, 1);
int cpu = get_cpu();
- info = get_flush_tlb_info(NULL, 0, TLB_FLUSH_ALL, 0, false, 0);
+ info = get_flush_tlb_info(NULL, 0, TLB_FLUSH_ALL, 0, false,
+ TLB_GENERATION_INVALID);
/*
* flush_tlb_multi() is not optimized for the common case in which only
* a local TLB flush is needed. Optimize this use-case by calling
$(obj)/purgatory.chk: $(obj)/purgatory.ro FORCE
$(call if_changed,ld)
-targets += kexec-purgatory.c
+$(obj)/kexec-purgatory.o: $(obj)/purgatory.ro $(obj)/purgatory.chk
-quiet_cmd_bin2c = BIN2C $@
- cmd_bin2c = $(objtree)/scripts/bin2c kexec_purgatory < $< > $@
-
-$(obj)/kexec-purgatory.c: $(obj)/purgatory.ro $(obj)/purgatory.chk FORCE
- $(call if_changed,bin2c)
-
-obj-$(CONFIG_KEXEC_FILE) += kexec-purgatory.o
+obj-y += kexec-purgatory.o
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+ .section .rodata, "a"
+
+ .align 8
+kexec_purgatory:
+ .globl kexec_purgatory
+ .incbin "arch/x86/purgatory/purgatory.ro"
+.Lkexec_purgatory_end:
+
+ .align 8
+kexec_purgatory_size:
+ .globl kexec_purgatory_size
+ .quad .Lkexec_purgatory_end - kexec_purgatory
for_each_active_irq(i) {
struct irq_data *data = irq_get_irq_data(i);
- struct cpumask *mask;
+ const struct cpumask *mask;
unsigned int newcpu;
if (irqd_is_per_cpu(data))
pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
i, cpu);
- cpumask_setall(mask);
+ irq_set_affinity(i, cpu_all_mask);
+ } else {
+ irq_set_affinity(i, mask);
}
- irq_set_affinity(i, mask);
}
}
#endif /* CONFIG_HOTPLUG_CPU */
config ACPI_VIDEO
tristate "Video"
- depends on X86 && BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
select THERMAL
help
config ACPI_CPU_FREQ_PSS
bool
- select THERMAL
config ACPI_PROCESSOR_CSTATE
def_bool y
depends on X86 || IA64 || ARM64 || LOONGARCH
select ACPI_PROCESSOR_IDLE
select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH
+ select THERMAL
default y
help
This driver adds support for the ACPI Processor package. It is required
obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
# processor has its own "processor." module_param namespace
-processor-y := processor_driver.o
+processor-y := processor_driver.o processor_thermal.o
processor-$(CONFIG_ACPI_PROCESSOR_IDLE) += processor_idle.o
-processor-$(CONFIG_ACPI_CPU_FREQ_PSS) += processor_throttling.o \
- processor_thermal.o
+processor-$(CONFIG_ACPI_CPU_FREQ_PSS) += processor_throttling.o
processor-$(CONFIG_CPU_FREQ) += processor_perflib.o
obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
if (!info->iomem_addr)
return;
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return;
-
/* Silently fail, if cpuidle attribute group is not present */
sysfs_add_file_to_group(&cpu_subsys.dev_root->kobj,
&dev_attr_low_power_idle_system_residency_us.attr,
"cpuidle");
} else if (info->gaddr.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return;
-
/* Silently fail, if cpuidle attribute group is not present */
sysfs_add_file_to_group(&cpu_subsys.dev_root->kobj,
&dev_attr_low_power_idle_cpu_residency_us.attr,
if (!lpss_clk_dev)
lpt_register_clock_device();
+ if (IS_ERR(lpss_clk_dev))
+ return PTR_ERR(lpss_clk_dev);
+
clk_data = platform_get_drvdata(lpss_clk_dev);
if (!clk_data)
return -ENODEV;
return 0;
}
-static int
-acpi_video_bus_get_one_device(struct acpi_device *device,
- struct acpi_video_bus *video)
+static int acpi_video_bus_get_one_device(struct acpi_device *device, void *arg)
{
- unsigned long long device_id;
- int status, device_type;
- struct acpi_video_device *data;
+ struct acpi_video_bus *video = arg;
struct acpi_video_device_attrib *attribute;
+ struct acpi_video_device *data;
+ unsigned long long device_id;
+ acpi_status status;
+ int device_type;
- status =
- acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
- /* Some device omits _ADR, we skip them instead of fail */
+ status = acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
+ /* Skip devices without _ADR instead of failing. */
if (ACPI_FAILURE(status))
- return 0;
+ goto exit;
data = kzalloc(sizeof(struct acpi_video_device), GFP_KERNEL);
- if (!data)
+ if (!data) {
+ dev_dbg(&device->dev, "Cannot attach\n");
return -ENOMEM;
+ }
strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
list_add_tail(&data->entry, &video->video_device_list);
mutex_unlock(&video->device_list_lock);
- return status;
+exit:
+ video->child_count++;
+ return 0;
}
/*
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
- int status = 0;
- struct acpi_device *dev;
-
/*
* There are systems where video module known to work fine regardless
* of broken _DOD and ignoring returned value here doesn't cause
*/
acpi_video_device_enumerate(video);
- list_for_each_entry(dev, &device->children, node) {
-
- status = acpi_video_bus_get_one_device(dev, video);
- if (status) {
- dev_err(&dev->dev, "Can't attach device\n");
- break;
- }
- video->child_count++;
- }
- return status;
+ return acpi_dev_for_each_child(device, acpi_video_bus_get_one_device, video);
}
/* acpi_video interface */
* apei-base.c - ACPI Platform Error Interface (APEI) supporting
* infrastructure
*
- * APEI allows to report errors (for example from the chipset) to the
+ * APEI allows to report errors (for example from the chipset) to
* the operating system. This improves NMI handling especially. In
* addition it supports error serialization and error injection.
*
#undef pr_fmt
#define pr_fmt(fmt) "BERT: " fmt
+
+#define ACPI_BERT_PRINT_MAX_RECORDS 5
#define ACPI_BERT_PRINT_MAX_LEN 1024
static int bert_disable;
+/*
+ * Print "all" the error records in the BERT table, but avoid huge spam to
+ * the console if the BIOS included oversize records, or too many records.
+ * Skipping some records here does not lose anything because the full
+ * data is available to user tools in:
+ * /sys/firmware/acpi/tables/data/BERT
+ */
static void __init bert_print_all(struct acpi_bert_region *region,
unsigned int region_len)
{
struct acpi_hest_generic_status *estatus =
(struct acpi_hest_generic_status *)region;
int remain = region_len;
+ int printed = 0, skipped = 0;
u32 estatus_len;
while (remain >= sizeof(struct acpi_bert_region)) {
if (remain < estatus_len) {
pr_err(FW_BUG "Truncated status block (length: %u).\n",
estatus_len);
- return;
+ break;
}
/* No more error records. */
if (!estatus->block_status)
- return;
+ break;
if (cper_estatus_check(estatus)) {
pr_err(FW_BUG "Invalid error record.\n");
- return;
+ break;
}
- pr_info_once("Error records from previous boot:\n");
- if (region_len < ACPI_BERT_PRINT_MAX_LEN)
+ if (estatus_len < ACPI_BERT_PRINT_MAX_LEN &&
+ printed < ACPI_BERT_PRINT_MAX_RECORDS) {
+ pr_info_once("Error records from previous boot:\n");
cper_estatus_print(KERN_INFO HW_ERR, estatus);
- else
- pr_info_once("Max print length exceeded, table data is available at:\n"
- "/sys/firmware/acpi/tables/data/BERT");
+ printed++;
+ } else {
+ skipped++;
+ }
/*
* Because the boot error source is "one-time polled" type,
estatus = (void *)estatus + estatus_len;
remain -= estatus_len;
}
+
+ if (skipped)
+ pr_info(HW_ERR "Skipped %d error records\n", skipped);
}
static int __init setup_bert_disable(char *str)
!= REGION_INTERSECTS) &&
(region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_PERSISTENT_MEMORY)
!= REGION_INTERSECTS) &&
+ (region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_SOFT_RESERVED)
+ != REGION_INTERSECTS) &&
!arch_is_platform_page(base_addr)))
return -EINVAL;
static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
{
struct acpi_device *adev;
- struct acpi_driver *driver;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
bool hotplug_event = false;
if (!adev)
goto err;
- driver = adev->driver;
- if (driver && driver->ops.notify &&
- (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
- driver->ops.notify(adev, type);
+ if (adev->dev.driver) {
+ struct acpi_driver *driver = to_acpi_driver(adev->dev.driver);
+
+ if (driver && driver->ops.notify &&
+ (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
+ driver->ops.notify(adev, type);
+ }
if (!hotplug_event) {
acpi_bus_put_acpi_device(adev);
static void acpi_notify_device(acpi_handle handle, u32 event, void *data)
{
struct acpi_device *device = data;
+ struct acpi_driver *acpi_drv = to_acpi_driver(device->dev.driver);
- device->driver->ops.notify(device, event);
+ acpi_drv->ops.notify(device, event);
}
static void acpi_notify_device_fixed(void *data)
if (ret)
return ret;
- acpi_dev->driver = acpi_drv;
-
pr_debug("Driver [%s] successfully bound to device [%s]\n",
acpi_drv->name, acpi_dev->pnp.bus_id);
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev);
- acpi_dev->driver = NULL;
acpi_dev->driver_data = NULL;
return ret;
}
static void acpi_device_remove(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
- struct acpi_driver *acpi_drv = acpi_dev->driver;
+ struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
+
+ if (acpi_drv->ops.notify)
+ acpi_device_remove_notify_handler(acpi_dev);
+
+ if (acpi_drv->ops.remove)
+ acpi_drv->ops.remove(acpi_dev);
- if (acpi_drv) {
- if (acpi_drv->ops.notify)
- acpi_device_remove_notify_handler(acpi_dev);
- if (acpi_drv->ops.remove)
- acpi_drv->ops.remove(acpi_dev);
- }
- acpi_dev->driver = NULL;
acpi_dev->driver_data = NULL;
put_device(dev);
return adwc->fn(to_acpi_device(dev), adwc->data);
}
+EXPORT_SYMBOL_GPL(acpi_dev_for_each_child);
int acpi_dev_for_each_child(struct acpi_device *adev,
int (*fn)(struct acpi_device *, void *), void *data)
return device_for_each_child(&adev->dev, &adwc, acpi_dev_for_one_check);
}
+int acpi_dev_for_each_child_reverse(struct acpi_device *adev,
+ int (*fn)(struct acpi_device *, void *),
+ void *data)
+{
+ struct acpi_dev_walk_context adwc = {
+ .fn = fn,
+ .data = data,
+ };
+
+ return device_for_each_child_reverse(&adev->dev, &adwc, acpi_dev_for_one_check);
+}
+
/* --------------------------------------------------------------------------
Initialization/Cleanup
-------------------------------------------------------------------------- */
case ACPI_IRQ_MODEL_PLATFORM:
message = "platform specific model";
break;
+ case ACPI_IRQ_MODEL_LPIC:
+ message = "LPIC";
+ break;
default:
pr_info("Unknown interrupt routing model\n");
return -ENODEV;
pci_mmcfg_late_init();
acpi_iort_init();
+ acpi_viot_early_init();
acpi_hest_init();
acpi_ghes_init();
acpi_scan_init();
#ifdef CONFIG_ACPI_CONTAINER
-static int acpi_container_offline(struct container_dev *cdev)
+static int check_offline(struct acpi_device *adev, void *not_used)
{
- struct acpi_device *adev = ACPI_COMPANION(&cdev->dev);
- struct acpi_device *child;
+ if (acpi_scan_is_offline(adev, false))
+ return 0;
- /* Check all of the dependent devices' physical companions. */
- list_for_each_entry(child, &adev->children, node)
- if (!acpi_scan_is_offline(child, false))
- return -EBUSY;
+ return -EBUSY;
+}
- return 0;
+static int acpi_container_offline(struct container_dev *cdev)
+{
+ /* Check all of the dependent devices' physical companions. */
+ return acpi_dev_for_each_child(ACPI_COMPANION(&cdev->dev), check_offline, NULL);
}
static void acpi_container_release(struct device *dev)
return 0;
}
-/* Check if CPPC revision + num_ent combination is supported */
-static bool is_cppc_supported(int revision, int num_ent)
-{
- int expected_num_ent;
-
- switch (revision) {
- case CPPC_V2_REV:
- expected_num_ent = CPPC_V2_NUM_ENT;
- break;
- case CPPC_V3_REV:
- expected_num_ent = CPPC_V3_NUM_ENT;
- break;
- default:
- pr_debug("Firmware exports unsupported CPPC revision: %d\n",
- revision);
- return false;
- }
-
- if (expected_num_ent != num_ent) {
- pr_debug("Firmware exports %d entries. Expected: %d for CPPC rev:%d\n",
- num_ent, expected_num_ent, revision);
- return false;
- }
-
- return true;
-}
-
/*
* An example CPC table looks like the following.
*
cpc_obj->type, pr->id);
goto out_free;
}
- cpc_ptr->num_entries = num_ent;
/* Second entry should be revision. */
cpc_obj = &out_obj->package.elements[1];
cpc_obj->type, pr->id);
goto out_free;
}
- cpc_ptr->version = cpc_rev;
- if (!is_cppc_supported(cpc_rev, num_ent))
+ if (cpc_rev < CPPC_V2_REV) {
+ pr_debug("Unsupported _CPC Revision (%d) for CPU:%d\n", cpc_rev,
+ pr->id);
+ goto out_free;
+ }
+
+ /*
+ * Disregard _CPC if the number of entries in the return pachage is not
+ * as expected, but support future revisions being proper supersets of
+ * the v3 and only causing more entries to be returned by _CPC.
+ */
+ if ((cpc_rev == CPPC_V2_REV && num_ent != CPPC_V2_NUM_ENT) ||
+ (cpc_rev == CPPC_V3_REV && num_ent != CPPC_V3_NUM_ENT) ||
+ (cpc_rev > CPPC_V3_REV && num_ent <= CPPC_V3_NUM_ENT)) {
+ pr_debug("Unexpected number of _CPC return package entries (%d) for CPU:%d\n",
+ num_ent, pr->id);
goto out_free;
+ }
+ if (cpc_rev > CPPC_V3_REV) {
+ num_ent = CPPC_V3_NUM_ENT;
+ cpc_rev = CPPC_V3_REV;
+ }
+
+ cpc_ptr->num_entries = num_ent;
+ cpc_ptr->version = cpc_rev;
/* Iterate through remaining entries in _CPC */
for (i = 2; i < num_ent; i++) {
}
EXPORT_SYMBOL_GPL(acpi_device_fix_up_power);
+static int fix_up_power_if_applicable(struct acpi_device *adev, void *not_used)
+{
+ if (adev->status.present && adev->status.enabled)
+ acpi_device_fix_up_power(adev);
+
+ return 0;
+}
+
+/**
+ * acpi_device_fix_up_power_extended - Force device and its children into D0.
+ * @adev: Parent device object whose power state is to be fixed up.
+ *
+ * Call acpi_device_fix_up_power() for @adev and its children so long as they
+ * are reported as present and enabled.
+ */
+void acpi_device_fix_up_power_extended(struct acpi_device *adev)
+{
+ acpi_device_fix_up_power(adev);
+ acpi_dev_for_each_child(adev, fix_up_power_if_applicable, NULL);
+}
+EXPORT_SYMBOL_GPL(acpi_device_fix_up_power_extended);
+
int acpi_device_update_power(struct acpi_device *device, int *state_p)
{
int state;
return -EINVAL;
if ((!acpi_device->handler || !acpi_device->handler->hotplug.enabled)
- && !acpi_device->driver)
+ && !d->driver)
return -ENODEV;
status = acpi_get_type(acpi_device->handle, ¬_used);
static struct workqueue_struct *ec_query_wq;
static int EC_FLAGS_CORRECT_ECDT; /* Needs ECDT port address correction */
-static int EC_FLAGS_IGNORE_DSDT_GPE; /* Needs ECDT GPE as correction setting */
static int EC_FLAGS_TRUST_DSDT_GPE; /* Needs DSDT GPE as correction setting */
static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
if (ec->data_addr == 0 || ec->command_addr == 0)
return AE_OK;
- if (boot_ec && boot_ec_is_ecdt && EC_FLAGS_IGNORE_DSDT_GPE) {
- /*
- * Always inherit the GPE number setting from the ECDT
- * EC.
- */
- ec->gpe = boot_ec->gpe;
- } else {
- /* Get GPE bit assignment (EC events). */
- /* TODO: Add support for _GPE returning a package */
- status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
- if (ACPI_SUCCESS(status))
- ec->gpe = tmp;
+ /* Get GPE bit assignment (EC events). */
+ /* TODO: Add support for _GPE returning a package */
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+ if (ACPI_SUCCESS(status))
+ ec->gpe = tmp;
+ /*
+ * Errors are non-fatal, allowing for ACPI Reduced Hardware
+ * platforms which use GpioInt instead of GPE.
+ */
- /*
- * Errors are non-fatal, allowing for ACPI Reduced Hardware
- * platforms which use GpioInt instead of GPE.
- */
- }
/* Use the global lock for all EC transactions? */
tmp = 0;
acpi_evaluate_integer(handle, "_GLK", NULL, &tmp);
}
if (boot_ec && ec->command_addr == boot_ec->command_addr &&
- ec->data_addr == boot_ec->data_addr &&
- !EC_FLAGS_TRUST_DSDT_GPE) {
+ ec->data_addr == boot_ec->data_addr) {
/*
- * Trust PNP0C09 namespace location rather than
- * ECDT ID. But trust ECDT GPE rather than _GPE
- * because of ASUS quirks, so do not change
- * boot_ec->gpe to ec->gpe.
+ * Trust PNP0C09 namespace location rather than ECDT ID.
+ * But trust ECDT GPE rather than _GPE because of ASUS
+ * quirks. So do not change boot_ec->gpe to ec->gpe,
+ * except when the TRUST_DSDT_GPE quirk is set.
*/
boot_ec->handle = ec->handle;
+
+ if (EC_FLAGS_TRUST_DSDT_GPE)
+ boot_ec->gpe = ec->gpe;
+
acpi_handle_debug(ec->handle, "duplicated.\n");
acpi_ec_free(ec);
ec = boot_ec;
return 0;
}
-/*
- * Some DSDTs contain wrong GPE setting.
- * Asus FX502VD/VE, GL702VMK, X550VXK, X580VD
- * https://bugzilla.kernel.org/show_bug.cgi?id=195651
- */
-static int ec_honor_ecdt_gpe(const struct dmi_system_id *id)
-{
- pr_debug("Detected system needing ignore DSDT GPE setting.\n");
- EC_FLAGS_IGNORE_DSDT_GPE = 1;
- return 0;
-}
-
static const struct dmi_system_id ec_dmi_table[] __initconst = {
{
- ec_correct_ecdt, "MSI MS-171F", {
- DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUS FX502VD", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "FX502VD"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUS FX502VE", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "FX502VE"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUS GL702VMK", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "GL702VMK"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X505BA", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X505BA"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X505BP", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X505BP"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X542BA", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X542BA"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X542BP", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X542BP"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUS X550VXK", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X550VXK"),}, NULL},
- {
- ec_honor_ecdt_gpe, "ASUS X580VD", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X580VD"),}, NULL},
+ /*
+ * MSI MS-171F
+ * https://bugzilla.kernel.org/show_bug.cgi?id=12461
+ */
+ .callback = ec_correct_ecdt,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),
+ },
+ },
{
- /* https://bugzilla.kernel.org/show_bug.cgi?id=209989 */
- ec_honor_dsdt_gpe, "HP Pavilion Gaming Laptop 15-cx0xxx", {
- DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Gaming Laptop 15-cx0xxx"),}, NULL},
+ /*
+ * HP Pavilion Gaming Laptop 15-cx0xxx
+ * https://bugzilla.kernel.org/show_bug.cgi?id=209989
+ */
+ .callback = ec_honor_dsdt_gpe,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Gaming Laptop 15-cx0xxx"),
+ },
+ },
{
- ec_clear_on_resume, "Samsung hardware", {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
- {},
+ /*
+ * Samsung hardware
+ * https://bugzilla.kernel.org/show_bug.cgi?id=44161
+ */
+ .callback = ec_clear_on_resume,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ },
+ },
+ {}
};
void __init acpi_ec_ecdt_probe(void)
static const struct dmi_system_id acpi_ec_no_wakeup[] = {
{
- .ident = "Thinkpad X1 Carbon 6th",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "Thinkpad X1 Carbon 6th"),
},
},
{
- .ident = "ThinkPad X1 Carbon 6th",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Carbon 6th"),
- },
- },
- {
- .ident = "ThinkPad X1 Yoga 3rd",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Yoga 3rd"),
},
},
{
- .ident = "HP ZHAN 66 Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "103C_5336AN HP ZHAN 66 Pro"),
#define FIND_CHILD_MIN_SCORE 1
#define FIND_CHILD_MAX_SCORE 2
+static int match_any(struct acpi_device *adev, void *not_used)
+{
+ return 1;
+}
+
+static bool acpi_dev_has_children(struct acpi_device *adev)
+{
+ return acpi_dev_for_each_child(adev, match_any, NULL) > 0;
+}
+
static int find_child_checks(struct acpi_device *adev, bool check_children)
{
unsigned long long sta;
acpi_status status;
- if (check_children && list_empty(&adev->children))
+ if (check_children && !acpi_dev_has_children(adev))
return -ENODEV;
status = acpi_evaluate_integer(adev->handle, "_STA", NULL, &sta);
return FIND_CHILD_MAX_SCORE;
}
-struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
- u64 address, bool check_children)
-{
- struct acpi_device *adev, *ret = NULL;
- int ret_score = 0;
-
- if (!parent)
- return NULL;
+struct find_child_walk_data {
+ struct acpi_device *adev;
+ u64 address;
+ int score;
+ bool check_sta;
+ bool check_children;
+};
- list_for_each_entry(adev, &parent->children, node) {
- acpi_bus_address addr = acpi_device_adr(adev);
- int score;
+static int check_one_child(struct acpi_device *adev, void *data)
+{
+ struct find_child_walk_data *wd = data;
+ int score;
- if (!adev->pnp.type.bus_address || addr != address)
- continue;
+ if (!adev->pnp.type.bus_address || acpi_device_adr(adev) != wd->address)
+ return 0;
- if (!ret) {
- /* This is the first matching object. Save it. */
- ret = adev;
- continue;
- }
+ if (!wd->adev) {
/*
- * There is more than one matching device object with the same
- * _ADR value. That really is unexpected, so we are kind of
- * beyond the scope of the spec here. We have to choose which
- * one to return, though.
- *
- * First, check if the previously found object is good enough
- * and return it if so. Second, do the same for the object that
- * we've just found.
+ * This is the first matching object, so save it. If it is not
+ * necessary to look for any other matching objects, stop the
+ * search.
*/
- if (!ret_score) {
- ret_score = find_child_checks(ret, check_children);
- if (ret_score == FIND_CHILD_MAX_SCORE)
- return ret;
- }
- score = find_child_checks(adev, check_children);
- if (score == FIND_CHILD_MAX_SCORE) {
- return adev;
- } else if (score > ret_score) {
- ret = adev;
- ret_score = score;
- }
+ wd->adev = adev;
+ return !(wd->check_sta || wd->check_children);
}
- return ret;
+
+ /*
+ * There is more than one matching device object with the same _ADR
+ * value. That really is unexpected, so we are kind of beyond the scope
+ * of the spec here. We have to choose which one to return, though.
+ *
+ * First, get the score for the previously found object and terminate
+ * the walk if it is maximum.
+ */
+ if (!wd->score) {
+ score = find_child_checks(wd->adev, wd->check_children);
+ if (score == FIND_CHILD_MAX_SCORE)
+ return 1;
+
+ wd->score = score;
+ }
+ /*
+ * Second, if the object that has just been found has a better score,
+ * replace the previously found one with it and terminate the walk if
+ * the new score is maximum.
+ */
+ score = find_child_checks(adev, wd->check_children);
+ if (score > wd->score) {
+ wd->adev = adev;
+ if (score == FIND_CHILD_MAX_SCORE)
+ return 1;
+
+ wd->score = score;
+ }
+
+ /* Continue, because there may be better matches. */
+ return 0;
+}
+
+static struct acpi_device *acpi_find_child(struct acpi_device *parent,
+ u64 address, bool check_children,
+ bool check_sta)
+{
+ struct find_child_walk_data wd = {
+ .address = address,
+ .check_children = check_children,
+ .check_sta = check_sta,
+ .adev = NULL,
+ .score = 0,
+ };
+
+ if (parent)
+ acpi_dev_for_each_child(parent, check_one_child, &wd);
+
+ return wd.adev;
+}
+
+struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
+ u64 address, bool check_children)
+{
+ return acpi_find_child(parent, address, check_children, true);
}
EXPORT_SYMBOL_GPL(acpi_find_child_device);
+struct acpi_device *acpi_find_child_by_adr(struct acpi_device *adev,
+ acpi_bus_address adr)
+{
+ return acpi_find_child(adev, adr, false, false);
+}
+EXPORT_SYMBOL_GPL(acpi_find_child_by_adr);
+
static void acpi_physnode_link_name(char *buf, unsigned int node_id)
{
if (node_id > 0)
enum acpi_irq_model_id acpi_irq_model;
-static struct fwnode_handle *acpi_gsi_domain_id;
+static struct fwnode_handle *(*acpi_get_gsi_domain_id)(u32 gsi);
+static u32 (*acpi_gsi_to_irq_fallback)(u32 gsi);
/**
* acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI
*/
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
- struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id,
- DOMAIN_BUS_ANY);
+ struct irq_domain *d;
+ d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(gsi),
+ DOMAIN_BUS_ANY);
*irq = irq_find_mapping(d, gsi);
/*
- * *irq == 0 means no mapping, that should
- * be reported as a failure
+ * *irq == 0 means no mapping, that should be reported as a
+ * failure, unless there is an arch-specific fallback handler.
*/
+ if (!*irq && acpi_gsi_to_irq_fallback)
+ *irq = acpi_gsi_to_irq_fallback(gsi);
+
return (*irq > 0) ? 0 : -EINVAL;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
{
struct irq_fwspec fwspec;
- if (WARN_ON(!acpi_gsi_domain_id)) {
+ fwspec.fwnode = acpi_get_gsi_domain_id(gsi);
+ if (WARN_ON(!fwspec.fwnode)) {
pr_warn("GSI: No registered irqchip, giving up\n");
return -EINVAL;
}
- fwspec.fwnode = acpi_gsi_domain_id;
fwspec.param[0] = gsi;
fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
fwspec.param_count = 2;
*/
void acpi_unregister_gsi(u32 gsi)
{
- struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id,
- DOMAIN_BUS_ANY);
+ struct irq_domain *d;
int irq;
if (WARN_ON(acpi_irq_model == ACPI_IRQ_MODEL_GIC && gsi < 16))
return;
+ d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(gsi),
+ DOMAIN_BUS_ANY);
irq = irq_find_mapping(d, gsi);
irq_dispose_mapping(irq);
}
* The referenced device fwhandle or NULL on failure
*/
static struct fwnode_handle *
-acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source)
+acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source,
+ u32 gsi)
{
struct fwnode_handle *result;
struct acpi_device *device;
acpi_status status;
if (!source->string_length)
- return acpi_gsi_domain_id;
+ return acpi_get_gsi_domain_id(gsi);
status = acpi_get_handle(NULL, source->string_ptr, &handle);
if (WARN_ON(ACPI_FAILURE(status)))
ctx->index -= irq->interrupt_count;
return AE_OK;
}
- fwnode = acpi_gsi_domain_id;
+ fwnode = acpi_get_gsi_domain_id(irq->interrupts[ctx->index]);
acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index],
irq->triggering, irq->polarity,
irq->shareable, ctx);
ctx->index -= eirq->interrupt_count;
return AE_OK;
}
- fwnode = acpi_get_irq_source_fwhandle(&eirq->resource_source);
+ fwnode = acpi_get_irq_source_fwhandle(&eirq->resource_source,
+ eirq->interrupts[ctx->index]);
acpi_irq_parse_one_match(fwnode, eirq->interrupts[ctx->index],
eirq->triggering, eirq->polarity,
eirq->shareable, ctx);
* GSI interrupts
*/
void __init acpi_set_irq_model(enum acpi_irq_model_id model,
- struct fwnode_handle *fwnode)
+ struct fwnode_handle *(*fn)(u32))
{
acpi_irq_model = model;
- acpi_gsi_domain_id = fwnode;
+ acpi_get_gsi_domain_id = fn;
+}
+
+/**
+ * acpi_set_gsi_to_irq_fallback - Register a GSI transfer
+ * callback to fallback to arch specified implementation.
+ * @fn: arch-specific fallback handler
+ */
+void __init acpi_set_gsi_to_irq_fallback(u32 (*fn)(u32))
+{
+ acpi_gsi_to_irq_fallback = fn;
}
/**
const struct irq_domain_ops *ops,
void *host_data)
{
- struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id,
- DOMAIN_BUS_ANY);
+ struct irq_domain *d;
+
+ /* This only works for the GIC model... */
+ if (acpi_irq_model != ACPI_IRQ_MODEL_GIC)
+ return NULL;
+
+ d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(0),
+ DOMAIN_BUS_ANY);
if (!d)
return NULL;
case ACPI_RESOURCE_TYPE_IRQ:
{
struct acpi_resource_irq *p = &resource->data.irq;
- if (!p || !p->interrupt_count) {
+ if (!p->interrupt_count) {
acpi_handle_debug(handle,
"Blank _PRS IRQ resource\n");
return AE_OK;
{
struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
- if (!p || !p->interrupt_count) {
+ if (!p->interrupt_count) {
acpi_handle_debug(handle,
"Blank _PRS EXT IRQ resource\n");
return AE_OK;
case ACPI_RESOURCE_TYPE_IRQ:
{
struct acpi_resource_irq *p = &resource->data.irq;
- if (!p || !p->interrupt_count) {
+ if (!p->interrupt_count) {
/*
* IRQ descriptors may have no IRQ# bits set,
* particularly those w/ _STA disabled
{
struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
- if (!p || !p->interrupt_count) {
+ if (!p->interrupt_count) {
/*
* extended IRQ descriptors must
* return at least 1 IRQ
}
#ifdef CONFIG_ACPI_CPU_FREQ_PSS
-static int acpi_pss_perf_init(struct acpi_processor *pr,
- struct acpi_device *device)
+static void acpi_pss_perf_init(struct acpi_processor *pr)
{
- int result = 0;
-
acpi_processor_ppc_has_changed(pr, 0);
acpi_processor_get_throttling_info(pr);
if (pr->flags.throttling)
pr->flags.limit = 1;
-
- pr->cdev = thermal_cooling_device_register("Processor", device,
- &processor_cooling_ops);
- if (IS_ERR(pr->cdev)) {
- result = PTR_ERR(pr->cdev);
- return result;
- }
-
- dev_dbg(&device->dev, "registered as cooling_device%d\n",
- pr->cdev->id);
-
- result = sysfs_create_link(&device->dev.kobj,
- &pr->cdev->device.kobj,
- "thermal_cooling");
- if (result) {
- dev_err(&device->dev,
- "Failed to create sysfs link 'thermal_cooling'\n");
- goto err_thermal_unregister;
- }
-
- result = sysfs_create_link(&pr->cdev->device.kobj,
- &device->dev.kobj,
- "device");
- if (result) {
- dev_err(&pr->cdev->device,
- "Failed to create sysfs link 'device'\n");
- goto err_remove_sysfs_thermal;
- }
-
- return 0;
-
- err_remove_sysfs_thermal:
- sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
- err_thermal_unregister:
- thermal_cooling_device_unregister(pr->cdev);
-
- return result;
-}
-
-static void acpi_pss_perf_exit(struct acpi_processor *pr,
- struct acpi_device *device)
-{
- if (pr->cdev) {
- sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
- sysfs_remove_link(&pr->cdev->device.kobj, "device");
- thermal_cooling_device_unregister(pr->cdev);
- pr->cdev = NULL;
- }
}
#else
-static inline int acpi_pss_perf_init(struct acpi_processor *pr,
- struct acpi_device *device)
-{
- return 0;
-}
-
-static inline void acpi_pss_perf_exit(struct acpi_processor *pr,
- struct acpi_device *device) {}
+static inline void acpi_pss_perf_init(struct acpi_processor *pr) {}
#endif /* CONFIG_ACPI_CPU_FREQ_PSS */
static int __acpi_processor_start(struct acpi_device *device)
if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver)
acpi_processor_power_init(pr);
- result = acpi_pss_perf_init(pr, device);
+ acpi_pss_perf_init(pr);
+
+ result = acpi_processor_thermal_init(pr, device);
if (result)
goto err_power_exit;
return 0;
result = -ENODEV;
- acpi_pss_perf_exit(pr, device);
+ acpi_processor_thermal_exit(pr, device);
err_power_exit:
acpi_processor_power_exit(pr);
return 0;
acpi_processor_power_exit(pr);
- acpi_pss_perf_exit(pr, device);
-
acpi_cppc_processor_exit(pr);
+ acpi_processor_thermal_exit(pr, device);
+
return 0;
}
* @cx: Target state context
* @index: index of target state
*/
-static int acpi_idle_enter_bm(struct cpuidle_driver *drv,
+static int __cpuidle acpi_idle_enter_bm(struct cpuidle_driver *drv,
struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int index)
return index;
}
-static int acpi_idle_enter(struct cpuidle_device *dev,
+static int __cpuidle acpi_idle_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
return index;
}
-static int acpi_idle_enter_s2idle(struct cpuidle_device *dev,
+static int __cpuidle acpi_idle_enter_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
.get_cur_state = processor_get_cur_state,
.set_cur_state = processor_set_cur_state,
};
+
+int acpi_processor_thermal_init(struct acpi_processor *pr,
+ struct acpi_device *device)
+{
+ int result = 0;
+
+ pr->cdev = thermal_cooling_device_register("Processor", device,
+ &processor_cooling_ops);
+ if (IS_ERR(pr->cdev)) {
+ result = PTR_ERR(pr->cdev);
+ return result;
+ }
+
+ dev_dbg(&device->dev, "registered as cooling_device%d\n",
+ pr->cdev->id);
+
+ result = sysfs_create_link(&device->dev.kobj,
+ &pr->cdev->device.kobj,
+ "thermal_cooling");
+ if (result) {
+ dev_err(&device->dev,
+ "Failed to create sysfs link 'thermal_cooling'\n");
+ goto err_thermal_unregister;
+ }
+
+ result = sysfs_create_link(&pr->cdev->device.kobj,
+ &device->dev.kobj,
+ "device");
+ if (result) {
+ dev_err(&pr->cdev->device,
+ "Failed to create sysfs link 'device'\n");
+ goto err_remove_sysfs_thermal;
+ }
+
+ return 0;
+
+err_remove_sysfs_thermal:
+ sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+ thermal_cooling_device_unregister(pr->cdev);
+
+ return result;
+}
+
+void acpi_processor_thermal_exit(struct acpi_processor *pr,
+ struct acpi_device *device)
+{
+ if (pr->cdev) {
+ sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+ sysfs_remove_link(&pr->cdev->device.kobj, "device");
+ thermal_cooling_device_unregister(pr->cdev);
+ pr->cdev = NULL;
+ }
+}
propname, proptype, val, nval);
}
+static int stop_on_next(struct acpi_device *adev, void *data)
+{
+ struct acpi_device **ret_p = data;
+
+ if (!*ret_p) {
+ *ret_p = adev;
+ return 1;
+ }
+
+ /* Skip until the "previous" object is found. */
+ if (*ret_p == adev)
+ *ret_p = NULL;
+
+ return 0;
+}
+
/**
* acpi_get_next_subnode - Return the next child node handle for a fwnode
* @fwnode: Firmware node to find the next child node for.
struct fwnode_handle *acpi_get_next_subnode(const struct fwnode_handle *fwnode,
struct fwnode_handle *child)
{
- const struct acpi_device *adev = to_acpi_device_node(fwnode);
- const struct list_head *head;
- struct list_head *next;
+ struct acpi_device *adev = to_acpi_device_node(fwnode);
if ((!child || is_acpi_device_node(child)) && adev) {
- struct acpi_device *child_adev;
+ struct acpi_device *child_adev = to_acpi_device_node(child);
- head = &adev->children;
- if (list_empty(head))
- goto nondev;
+ acpi_dev_for_each_child(adev, stop_on_next, &child_adev);
+ if (child_adev)
+ return acpi_fwnode_handle(child_adev);
- if (child) {
- adev = to_acpi_device_node(child);
- next = adev->node.next;
- if (next == head) {
- child = NULL;
- goto nondev;
- }
- child_adev = list_entry(next, struct acpi_device, node);
- } else {
- child_adev = list_first_entry(head, struct acpi_device,
- node);
- }
- return acpi_fwnode_handle(child_adev);
+ child = NULL;
}
- nondev:
if (!child || is_acpi_data_node(child)) {
const struct acpi_data_node *data = to_acpi_data_node(fwnode);
+ const struct list_head *head;
+ struct list_head *next;
struct acpi_data_node *dn;
/*
{
int i;
+#ifdef CONFIG_X86
+ /*
+ * IRQ override isn't needed on modern AMD Zen systems and
+ * this override breaks active low IRQs on AMD Ryzen 6000 and
+ * newer systems. Skip it.
+ */
+ if (boot_cpu_has(X86_FEATURE_ZEN))
+ return false;
+#endif
+
for (i = 0; i < ARRAY_SIZE(skip_override_table); i++) {
const struct irq_override_cmp *entry = &skip_override_table[i];
return error;
}
-static int acpi_scan_bus_check(struct acpi_device *adev)
+static int acpi_scan_bus_check(struct acpi_device *adev, void *not_used)
{
struct acpi_scan_handler *handler = adev->handler;
- struct acpi_device *child;
int error;
acpi_bus_get_status(adev);
dev_warn(&adev->dev, "Namespace scan failure\n");
return error;
}
- list_for_each_entry(child, &adev->children, node) {
- error = acpi_scan_bus_check(child);
- if (error)
- return error;
- }
- return 0;
+ return acpi_dev_for_each_child(adev, acpi_scan_bus_check, NULL);
}
static int acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
{
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
- return acpi_scan_bus_check(adev);
+ return acpi_scan_bus_check(adev, NULL);
case ACPI_NOTIFY_DEVICE_CHECK:
return acpi_scan_device_check(adev);
case ACPI_NOTIFY_EJECT_REQUEST:
struct acpi_device_bus_id *acpi_device_bus_id;
mutex_lock(&acpi_device_lock);
- if (device->parent)
- list_del(&device->node);
list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node)
if (!strcmp(acpi_device_bus_id->bus_id,
}
list_del(&device->wakeup_list);
+
mutex_unlock(&acpi_device_lock);
acpi_power_add_remove_device(device, false);
* -------
* Link this device to its parent and siblings.
*/
- INIT_LIST_HEAD(&device->children);
- INIT_LIST_HEAD(&device->node);
INIT_LIST_HEAD(&device->wakeup_list);
INIT_LIST_HEAD(&device->physical_node_list);
INIT_LIST_HEAD(&device->del_list);
list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
}
- if (device->parent)
- list_add_tail(&device->node, &device->parent->children);
-
if (device->wakeup.flags.valid)
list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list);
err:
mutex_lock(&acpi_device_lock);
- if (device->parent)
- list_del(&device->node);
-
list_del(&device->wakeup_list);
err_unlock:
return ret;
}
-static void acpi_bus_attach(struct acpi_device *device, bool first_pass)
+static int acpi_bus_attach(struct acpi_device *device, void *first_pass)
{
- struct acpi_device *child;
bool skip = !first_pass && device->flags.visited;
acpi_handle ejd;
int ret;
device->flags.initialized = false;
acpi_device_clear_enumerated(device);
device->flags.power_manageable = 0;
- return;
+ return 0;
}
if (device->handler)
goto ok;
ret = acpi_scan_attach_handler(device);
if (ret < 0)
- return;
+ return 0;
device->flags.match_driver = true;
if (ret > 0 && !device->flags.enumeration_by_parent) {
ret = device_attach(&device->dev);
if (ret < 0)
- return;
+ return 0;
if (device->pnp.type.platform_id || device->flags.enumeration_by_parent)
acpi_default_enumeration(device);
else
acpi_device_set_enumerated(device);
- ok:
- list_for_each_entry(child, &device->children, node)
- acpi_bus_attach(child, first_pass);
+ok:
+ acpi_dev_for_each_child(device, acpi_bus_attach, first_pass);
if (!skip && device->handler && device->handler->hotplug.notify_online)
device->handler->hotplug.notify_online(device);
+
+ return 0;
}
static int acpi_dev_get_first_consumer_dev_cb(struct acpi_dep_data *dep, void *data)
cdw = container_of(work, struct acpi_scan_clear_dep_work, work);
acpi_scan_lock_acquire();
- acpi_bus_attach(cdw->adev, true);
+ acpi_bus_attach(cdw->adev, (void *)true);
acpi_scan_lock_release();
acpi_dev_put(cdw->adev);
if (!device)
return -ENODEV;
- acpi_bus_attach(device, true);
+ acpi_bus_attach(device, (void *)true);
if (!acpi_bus_scan_second_pass)
return 0;
acpi_bus_check_add_2, NULL, NULL,
(void **)&device);
- acpi_bus_attach(device, false);
+ acpi_bus_attach(device, NULL);
return 0;
}
EXPORT_SYMBOL(acpi_bus_scan);
-/**
- * acpi_bus_trim - Detach scan handlers and drivers from ACPI device objects.
- * @adev: Root of the ACPI namespace scope to walk.
- *
- * Must be called under acpi_scan_lock.
- */
-void acpi_bus_trim(struct acpi_device *adev)
+static int acpi_bus_trim_one(struct acpi_device *adev, void *not_used)
{
struct acpi_scan_handler *handler = adev->handler;
- struct acpi_device *child;
- list_for_each_entry_reverse(child, &adev->children, node)
- acpi_bus_trim(child);
+ acpi_dev_for_each_child_reverse(adev, acpi_bus_trim_one, NULL);
adev->flags.match_driver = false;
if (handler) {
acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
adev->flags.initialized = false;
acpi_device_clear_enumerated(adev);
+
+ return 0;
+}
+
+/**
+ * acpi_bus_trim - Detach scan handlers and drivers from ACPI device objects.
+ * @adev: Root of the ACPI namespace scope to walk.
+ *
+ * Must be called under acpi_scan_lock.
+ */
+void acpi_bus_trim(struct acpi_device *adev)
+{
+ acpi_bus_trim_one(adev, NULL);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
},
},
+ {
+ .callback = init_nvs_save_s3,
+ .ident = "Lenovo G40-45",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "80E1"),
+ },
+ },
/*
* ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using
* the Low Power S0 Idle firmware interface (see
void __weak acpi_s2idle_setup(void)
{
+ if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
+ pr_info("Efficient low-power S0 idle declared\n");
+
s2idle_set_ops(&acpi_s2idle_ops);
}
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro12,1"),
},
},
+ {
+ .callback = video_detect_force_native,
+ /* Dell Inspiron N4010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron N4010"),
+ },
+ },
{
.callback = video_detect_force_native,
/* Dell Vostro V131 */
.callback = video_detect_force_native,
.ident = "Clevo NL5xRU",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
},
},
.callback = video_detect_force_native,
.ident = "Clevo NL5xRU",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
- DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
},
},
{
.callback = video_detect_force_native,
.ident = "Clevo NL5xRU",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
- DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
},
},
{
.callback = video_detect_force_native,
- .ident = "Clevo NL5xRU",
+ .ident = "Clevo NL5xNU",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
- DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
},
},
+ /*
+ * The TongFang PF5PU1G, PF4NU1F, PF5NU1G, and PF5LUXG/TUXEDO BA15 Gen10,
+ * Pulse 14/15 Gen1, and Pulse 15 Gen2 have the same problem as the Clevo
+ * NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2. See the description
+ * above.
+ */
{
.callback = video_detect_force_native,
- .ident = "Clevo NL5xRU",
+ .ident = "TongFang PF5PU1G",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
- DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
+ DMI_MATCH(DMI_BOARD_NAME, "PF5PU1G"),
},
},
{
.callback = video_detect_force_native,
- .ident = "Clevo NL5xNU",
+ .ident = "TongFang PF4NU1F",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "PF4NU1F"),
+ },
+ },
+ {
+ .callback = video_detect_force_native,
+ .ident = "TongFang PF4NU1F",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
- DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+ DMI_MATCH(DMI_BOARD_NAME, "PULSE1401"),
},
},
{
.callback = video_detect_force_native,
- .ident = "Clevo NL5xNU",
+ .ident = "TongFang PF5NU1G",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
- DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+ DMI_MATCH(DMI_BOARD_NAME, "PF5NU1G"),
},
},
{
.callback = video_detect_force_native,
- .ident = "Clevo NL5xNU",
+ .ident = "TongFang PF5NU1G",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
- DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PULSE1501"),
+ },
+ },
+ {
+ .callback = video_detect_force_native,
+ .ident = "TongFang PF5LUXG",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "PF5LUXG"),
},
},
-
/*
* Desktops which falsely report a backlight and which our heuristics
* for this do not catch.
return ret;
}
+/**
+ * acpi_viot_early_init - Test the presence of VIOT and enable ACS
+ *
+ * If the VIOT does exist, ACS must be enabled. This cannot be
+ * done in acpi_viot_init() which is called after the bus scan
+ */
+void __init acpi_viot_early_init(void)
+{
+#ifdef CONFIG_PCI
+ acpi_status status;
+ struct acpi_table_header *hdr;
+
+ status = acpi_get_table(ACPI_SIG_VIOT, 0, &hdr);
+ if (ACPI_FAILURE(status))
+ return;
+ pci_request_acs();
+ acpi_put_table(hdr);
+#endif
+}
+
/**
* acpi_viot_init - Parse the VIOT table
*
epid = ((domain_nr - ep->segment_start) << 16) +
dev_id - ep->bdf_start + ep->endpoint_id;
- /*
- * If we found a PCI range managed by the viommu, we're
- * the one that has to request ACS.
- */
- pci_request_acs();
-
return viot_dev_iommu_init(&pdev->dev, ep->viommu,
epid);
}
if (lps0_device_handle)
return 0;
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return 0;
-
if (acpi_s2idle_vendor_amd()) {
/* AMD0004, AMD0005, AMDI0005:
* - Should use rev_id 0x0
lps0_dsm_func_mask = (lps0_dsm_func_mask << 1) | 0x1;
acpi_handle_debug(adev->handle, "_DSM UUID %s: Adjusted function mask: 0x%x\n",
ACPI_LPS0_DSM_UUID_AMD, lps0_dsm_func_mask);
- } else if (lps0_dsm_func_mask_microsoft > 0 && !strcmp(hid, "AMDI0007")) {
+ } else if (lps0_dsm_func_mask_microsoft > 0 &&
+ (!strcmp(hid, "AMDI0007") ||
+ !strcmp(hid, "AMDI0008"))) {
lps0_dsm_func_mask_microsoft = -EINVAL;
acpi_handle_debug(adev->handle, "_DSM Using AMD method\n");
}
lpi_device_get_constraints();
/*
- * Use suspend-to-idle by default if the default suspend mode was not
- * set from the command line.
+ * Use suspend-to-idle by default if ACPI_FADT_LOW_POWER_S0 is set in
+ * the FADT and the default suspend mode was not set from the command
+ * line.
*/
- if (mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3)
+ if ((acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) &&
+ mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3) {
mem_sleep_current = PM_SUSPEND_TO_IDLE;
+ pr_info("Low-power S0 idle used by default for system suspend\n");
+ }
/*
* Some LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U, require the
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
return -EINVAL;
}
+ if (config->num_reg_defaults && !config->reg_defaults) {
+ dev_err(map->dev,
+ "Register defaults number are set without the reg!\n");
+ return -EINVAL;
+ }
+
for (i = 0; i < config->num_reg_defaults; i++)
if (config->reg_defaults[i].reg % map->reg_stride)
return -EINVAL;
void regcache_cache_only(struct regmap *map, bool enable)
{
map->lock(map->lock_arg);
- WARN_ON(map->cache_bypass && enable);
+ WARN_ON(map->cache_type != REGCACHE_NONE &&
+ map->cache_bypass && enable);
map->cache_only = enable;
trace_regmap_cache_only(map, enable);
map->unlock(map->lock_arg);
* @enable: flag if changes should not be written to the cache
*
* When a register map is marked with the cache bypass option, writes
- * to the register map API will only update the hardware and not the
+ * to the register map API will only update the hardware and not
* the cache directly. This is useful when syncing the cache back to
* the hardware.
*/
int irq;
int wake_count;
+ unsigned int mask_base;
+ unsigned int unmask_base;
+
void *status_reg_buf;
unsigned int *main_status_buf;
unsigned int *status_buf;
unsigned int *type_buf;
unsigned int *type_buf_def;
unsigned int **virt_buf;
+ unsigned int **config_buf;
unsigned int irq_reg_stride;
- unsigned int type_reg_stride;
- bool clear_status:1;
-};
+ unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data,
+ unsigned int base, int index);
-static int sub_irq_reg(struct regmap_irq_chip_data *data,
- unsigned int base_reg, int i)
-{
- const struct regmap_irq_chip *chip = data->chip;
- struct regmap *map = data->map;
- struct regmap_irq_sub_irq_map *subreg;
- unsigned int offset;
- int reg = 0;
-
- if (!chip->sub_reg_offsets || !chip->not_fixed_stride) {
- /* Assume linear mapping */
- reg = base_reg + (i * map->reg_stride * data->irq_reg_stride);
- } else {
- subreg = &chip->sub_reg_offsets[i];
- offset = subreg->offset[0];
- reg = base_reg + offset;
- }
-
- return reg;
-}
+ unsigned int clear_status:1;
+};
static inline const
struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
return &data->chip->irqs[irq];
}
-static void regmap_irq_lock(struct irq_data *data)
+static bool regmap_irq_can_bulk_read_status(struct regmap_irq_chip_data *data)
{
- struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+ struct regmap *map = data->map;
- mutex_lock(&d->lock);
+ /*
+ * While possible that a user-defined ->get_irq_reg() callback might
+ * be linear enough to support bulk reads, most of the time it won't.
+ * Therefore only allow them if the default callback is being used.
+ */
+ return data->irq_reg_stride == 1 && map->reg_stride == 1 &&
+ data->get_irq_reg == regmap_irq_get_irq_reg_linear &&
+ !map->use_single_read;
}
-static int regmap_irq_update_bits(struct regmap_irq_chip_data *d,
- unsigned int reg, unsigned int mask,
- unsigned int val)
+static void regmap_irq_lock(struct irq_data *data)
{
- if (d->chip->mask_writeonly)
- return regmap_write_bits(d->map, reg, mask, val);
- else
- return regmap_update_bits(d->map, reg, mask, val);
+ struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&d->lock);
}
static void regmap_irq_sync_unlock(struct irq_data *data)
struct regmap *map = d->map;
int i, j, ret;
u32 reg;
- u32 unmask_offset;
u32 val;
if (d->chip->runtime_pm) {
if (d->clear_status) {
for (i = 0; i < d->chip->num_regs; i++) {
- reg = sub_irq_reg(d, d->chip->status_base, i);
+ reg = d->get_irq_reg(d, d->chip->status_base, i);
ret = regmap_read(map, reg, &val);
if (ret)
* suppress pointless writes.
*/
for (i = 0; i < d->chip->num_regs; i++) {
- if (!d->chip->mask_base)
- continue;
+ if (d->mask_base) {
+ reg = d->get_irq_reg(d, d->mask_base, i);
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i], d->mask_buf[i]);
+ if (ret)
+ dev_err(d->map->dev, "Failed to sync masks in %x\n",
+ reg);
+ }
- reg = sub_irq_reg(d, d->chip->mask_base, i);
- if (d->chip->mask_invert) {
- ret = regmap_irq_update_bits(d, reg,
- d->mask_buf_def[i], ~d->mask_buf[i]);
- } else if (d->chip->unmask_base) {
- /* set mask with mask_base register */
- ret = regmap_irq_update_bits(d, reg,
+ if (d->unmask_base) {
+ reg = d->get_irq_reg(d, d->unmask_base, i);
+ ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i], ~d->mask_buf[i]);
- if (ret < 0)
- dev_err(d->map->dev,
- "Failed to sync unmasks in %x\n",
+ if (ret)
+ dev_err(d->map->dev, "Failed to sync masks in %x\n",
reg);
- unmask_offset = d->chip->unmask_base -
- d->chip->mask_base;
- /* clear mask with unmask_base register */
- ret = regmap_irq_update_bits(d,
- reg + unmask_offset,
- d->mask_buf_def[i],
- d->mask_buf[i]);
- } else {
- ret = regmap_irq_update_bits(d, reg,
- d->mask_buf_def[i], d->mask_buf[i]);
}
- if (ret != 0)
- dev_err(d->map->dev, "Failed to sync masks in %x\n",
- reg);
- reg = sub_irq_reg(d, d->chip->wake_base, i);
+ reg = d->get_irq_reg(d, d->chip->wake_base, i);
if (d->wake_buf) {
if (d->chip->wake_invert)
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
~d->wake_buf[i]);
else
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
d->wake_buf[i]);
if (ret != 0)
* it'll be ignored in irq handler, then may introduce irq storm
*/
if (d->mask_buf[i] && (d->chip->ack_base || d->chip->use_ack)) {
- reg = sub_irq_reg(d, d->chip->ack_base, i);
+ reg = d->get_irq_reg(d, d->chip->ack_base, i);
/* some chips ack by write 0 */
if (d->chip->ack_invert)
for (i = 0; i < d->chip->num_type_reg; i++) {
if (!d->type_buf_def[i])
continue;
- reg = sub_irq_reg(d, d->chip->type_base, i);
+ reg = d->get_irq_reg(d, d->chip->type_base, i);
if (d->chip->type_invert)
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->type_buf_def[i], ~d->type_buf[i]);
else
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->type_buf_def[i], d->type_buf[i]);
if (ret != 0)
dev_err(d->map->dev, "Failed to sync type in %x\n",
if (d->chip->num_virt_regs) {
for (i = 0; i < d->chip->num_virt_regs; i++) {
for (j = 0; j < d->chip->num_regs; j++) {
- reg = sub_irq_reg(d, d->chip->virt_reg_base[i],
- j);
+ reg = d->get_irq_reg(d, d->chip->virt_reg_base[i],
+ j);
ret = regmap_write(map, reg, d->virt_buf[i][j]);
if (ret != 0)
dev_err(d->map->dev,
}
}
+ for (i = 0; i < d->chip->num_config_bases; i++) {
+ for (j = 0; j < d->chip->num_config_regs; j++) {
+ reg = d->get_irq_reg(d, d->chip->config_base[i], j);
+ ret = regmap_write(map, reg, d->config_buf[i][j]);
+ if (ret)
+ dev_err(d->map->dev,
+ "Failed to write config %x: %d\n",
+ reg, ret);
+ }
+ }
+
if (d->chip->runtime_pm)
pm_runtime_put(map->dev);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
unsigned int reg = irq_data->reg_offset / map->reg_stride;
- unsigned int mask, type;
-
- type = irq_data->type.type_falling_val | irq_data->type.type_rising_val;
+ unsigned int mask;
/*
* The type_in_mask flag means that the underlying hardware uses
- * separate mask bits for rising and falling edge interrupts, but
- * we want to make them into a single virtual interrupt with
- * configurable edge.
+ * separate mask bits for each interrupt trigger type, but we want
+ * to have a single logical interrupt with a configurable type.
*
- * If the interrupt we're enabling defines the falling or rising
- * masks then instead of using the regular mask bits for this
- * interrupt, use the value previously written to the type buffer
- * at the corresponding offset in regmap_irq_set_type().
+ * If the interrupt we're enabling defines any supported types
+ * then instead of using the regular mask bits for this interrupt,
+ * use the value previously written to the type buffer at the
+ * corresponding offset in regmap_irq_set_type().
*/
- if (d->chip->type_in_mask && type)
+ if (d->chip->type_in_mask && irq_data->type.types_supported)
mask = d->type_buf[reg] & irq_data->mask;
else
mask = irq_data->mask;
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
- int reg;
+ int reg, ret;
const struct regmap_irq_type *t = &irq_data->type;
if ((t->types_supported & type) != type)
return -EINVAL;
}
- if (d->chip->set_type_virt)
- return d->chip->set_type_virt(d->virt_buf, type, data->hwirq,
- reg);
+ if (d->chip->set_type_virt) {
+ ret = d->chip->set_type_virt(d->virt_buf, type, data->hwirq,
+ reg);
+ if (ret)
+ return ret;
+ }
+
+ if (d->chip->set_type_config) {
+ ret = d->chip->set_type_config(d->config_buf, type,
+ irq_data, reg);
+ if (ret)
+ return ret;
+ }
return 0;
}
const struct regmap_irq_chip *chip = data->chip;
struct regmap *map = data->map;
struct regmap_irq_sub_irq_map *subreg;
+ unsigned int reg;
int i, ret = 0;
if (!chip->sub_reg_offsets) {
- /* Assume linear mapping */
- ret = regmap_read(map, chip->status_base +
- (b * map->reg_stride * data->irq_reg_stride),
- &data->status_buf[b]);
+ reg = data->get_irq_reg(data, chip->status_base, b);
+ ret = regmap_read(map, reg, &data->status_buf[b]);
} else {
+ /*
+ * Note we can't use ->get_irq_reg() here because the offsets
+ * in 'subreg' are *not* interchangeable with indices.
+ */
subreg = &chip->sub_reg_offsets[b];
for (i = 0; i < subreg->num_regs; i++) {
unsigned int offset = subreg->offset[i];
* sake of simplicity. and add bulk reads only if needed
*/
for (i = 0; i < chip->num_main_regs; i++) {
- ret = regmap_read(map, chip->main_status +
- (i * map->reg_stride
- * data->irq_reg_stride),
- &data->main_status_buf[i]);
+ /*
+ * For not_fixed_stride, don't use ->get_irq_reg().
+ * It would produce an incorrect result.
+ */
+ if (data->chip->not_fixed_stride)
+ reg = chip->main_status +
+ i * map->reg_stride * data->irq_reg_stride;
+ else
+ reg = data->get_irq_reg(data,
+ chip->main_status, i);
+
+ ret = regmap_read(map, reg, &data->main_status_buf[i]);
if (ret) {
dev_err(map->dev,
"Failed to read IRQ status %d\n",
}
}
- } else if (!map->use_single_read && map->reg_stride == 1 &&
- data->irq_reg_stride == 1) {
+ } else if (regmap_irq_can_bulk_read_status(data)) {
u8 *buf8 = data->status_reg_buf;
u16 *buf16 = data->status_reg_buf;
} else {
for (i = 0; i < data->chip->num_regs; i++) {
- unsigned int reg = sub_irq_reg(data,
+ unsigned int reg = data->get_irq_reg(data,
data->chip->status_base, i);
ret = regmap_read(map, reg, &data->status_buf[i]);
data->status_buf[i] &= ~data->mask_buf[i];
if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
- reg = sub_irq_reg(data, data->chip->ack_base, i);
+ reg = data->get_irq_reg(data, data->chip->ack_base, i);
if (chip->ack_invert)
ret = regmap_write(map, reg,
.xlate = irq_domain_xlate_onetwocell,
};
+/**
+ * regmap_irq_get_irq_reg_linear() - Linear IRQ register mapping callback.
+ * @data: Data for the &struct regmap_irq_chip
+ * @base: Base register
+ * @index: Register index
+ *
+ * Returns the register address corresponding to the given @base and @index
+ * by the formula ``base + index * regmap_stride * irq_reg_stride``.
+ */
+unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data,
+ unsigned int base, int index)
+{
+ const struct regmap_irq_chip *chip = data->chip;
+ struct regmap *map = data->map;
+
+ /*
+ * FIXME: This is for backward compatibility and should be removed
+ * when not_fixed_stride is dropped (it's only used by qcom-pm8008).
+ */
+ if (chip->not_fixed_stride && chip->sub_reg_offsets) {
+ struct regmap_irq_sub_irq_map *subreg;
+
+ subreg = &chip->sub_reg_offsets[0];
+ return base + subreg->offset[0];
+ }
+
+ return base + index * map->reg_stride * data->irq_reg_stride;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_get_irq_reg_linear);
+
+/**
+ * regmap_irq_set_type_config_simple() - Simple IRQ type configuration callback.
+ * @buf: Buffer containing configuration register values, this is a 2D array of
+ * `num_config_bases` rows, each of `num_config_regs` elements.
+ * @type: The requested IRQ type.
+ * @irq_data: The IRQ being configured.
+ * @idx: Index of the irq's config registers within each array `buf[i]`
+ *
+ * This is a &struct regmap_irq_chip->set_type_config callback suitable for
+ * chips with one config register. Register values are updated according to
+ * the &struct regmap_irq_type data associated with an IRQ.
+ */
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx)
+{
+ const struct regmap_irq_type *t = &irq_data->type;
+
+ if (t->type_reg_mask)
+ buf[0][idx] &= ~t->type_reg_mask;
+ else
+ buf[0][idx] &= ~(t->type_falling_val |
+ t->type_rising_val |
+ t->type_level_low_val |
+ t->type_level_high_val);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ buf[0][idx] |= t->type_falling_val;
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ buf[0][idx] |= t->type_rising_val;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ buf[0][idx] |= (t->type_falling_val |
+ t->type_rising_val);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ buf[0][idx] |= t->type_level_high_val;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ buf[0][idx] |= t->type_level_low_val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_set_type_config_simple);
+
/**
* regmap_add_irq_chip_fwnode() - Use standard regmap IRQ controller handling
*
int ret = -ENOMEM;
int num_type_reg;
u32 reg;
- u32 unmask_offset;
if (chip->num_regs <= 0)
return -EINVAL;
}
if (chip->not_fixed_stride) {
+ dev_warn(map->dev, "not_fixed_stride is deprecated; use ->get_irq_reg() instead");
+
for (i = 0; i < chip->num_regs; i++)
if (chip->sub_reg_offsets[i].num_regs != 1)
return -EINVAL;
}
+ if (chip->num_type_reg)
+ dev_warn(map->dev, "type registers are deprecated; use config registers instead");
+
+ if (chip->num_virt_regs || chip->virt_reg_base || chip->set_type_virt)
+ dev_warn(map->dev, "virtual registers are deprecated; use config registers instead");
+
if (irq_base) {
irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
if (irq_base < 0) {
if (chip->num_main_regs) {
d->main_status_buf = kcalloc(chip->num_main_regs,
- sizeof(unsigned int),
+ sizeof(*d->main_status_buf),
GFP_KERNEL);
if (!d->main_status_buf)
goto err_alloc;
}
- d->status_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
+ d->status_buf = kcalloc(chip->num_regs, sizeof(*d->status_buf),
GFP_KERNEL);
if (!d->status_buf)
goto err_alloc;
- d->mask_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
+ d->mask_buf = kcalloc(chip->num_regs, sizeof(*d->mask_buf),
GFP_KERNEL);
if (!d->mask_buf)
goto err_alloc;
- d->mask_buf_def = kcalloc(chip->num_regs, sizeof(unsigned int),
+ d->mask_buf_def = kcalloc(chip->num_regs, sizeof(*d->mask_buf_def),
GFP_KERNEL);
if (!d->mask_buf_def)
goto err_alloc;
if (chip->wake_base) {
- d->wake_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
+ d->wake_buf = kcalloc(chip->num_regs, sizeof(*d->wake_buf),
GFP_KERNEL);
if (!d->wake_buf)
goto err_alloc;
num_type_reg = chip->type_in_mask ? chip->num_regs : chip->num_type_reg;
if (num_type_reg) {
d->type_buf_def = kcalloc(num_type_reg,
- sizeof(unsigned int), GFP_KERNEL);
+ sizeof(*d->type_buf_def), GFP_KERNEL);
if (!d->type_buf_def)
goto err_alloc;
- d->type_buf = kcalloc(num_type_reg, sizeof(unsigned int),
+ d->type_buf = kcalloc(num_type_reg, sizeof(*d->type_buf),
GFP_KERNEL);
if (!d->type_buf)
goto err_alloc;
for (i = 0; i < chip->num_virt_regs; i++) {
d->virt_buf[i] = kcalloc(chip->num_regs,
- sizeof(unsigned int),
+ sizeof(**d->virt_buf),
GFP_KERNEL);
if (!d->virt_buf[i])
goto err_alloc;
}
}
+ if (chip->num_config_bases && chip->num_config_regs) {
+ /*
+ * Create config_buf[num_config_bases][num_config_regs]
+ */
+ d->config_buf = kcalloc(chip->num_config_bases,
+ sizeof(*d->config_buf), GFP_KERNEL);
+ if (!d->config_buf)
+ goto err_alloc;
+
+ for (i = 0; i < chip->num_config_regs; i++) {
+ d->config_buf[i] = kcalloc(chip->num_config_regs,
+ sizeof(**d->config_buf),
+ GFP_KERNEL);
+ if (!d->config_buf[i])
+ goto err_alloc;
+ }
+ }
+
d->irq_chip = regmap_irq_chip;
d->irq_chip.name = chip->name;
d->irq = irq;
d->chip = chip;
d->irq_base = irq_base;
+ if (chip->mask_base && chip->unmask_base &&
+ !chip->mask_unmask_non_inverted) {
+ /*
+ * Chips that specify both mask_base and unmask_base used to
+ * get inverted mask behavior by default, with no way to ask
+ * for the normal, non-inverted behavior. This "inverted by
+ * default" behavior is deprecated, but we have to support it
+ * until existing drivers have been fixed.
+ *
+ * Existing drivers should be updated by swapping mask_base
+ * and unmask_base and setting mask_unmask_non_inverted=true.
+ * New drivers should always set the flag.
+ */
+ dev_warn(map->dev, "mask_base and unmask_base are inverted, please fix it");
+
+ /* Might as well warn about mask_invert while we're at it... */
+ if (chip->mask_invert)
+ dev_warn(map->dev, "mask_invert=true ignored");
+
+ d->mask_base = chip->unmask_base;
+ d->unmask_base = chip->mask_base;
+ } else if (chip->mask_invert) {
+ /*
+ * Swap the roles of mask_base and unmask_base if the bits are
+ * inverted. This is deprecated, drivers should use unmask_base
+ * directly.
+ */
+ dev_warn(map->dev, "mask_invert=true is deprecated; please switch to unmask_base");
+
+ d->mask_base = chip->unmask_base;
+ d->unmask_base = chip->mask_base;
+ } else {
+ d->mask_base = chip->mask_base;
+ d->unmask_base = chip->unmask_base;
+ }
+
if (chip->irq_reg_stride)
d->irq_reg_stride = chip->irq_reg_stride;
else
d->irq_reg_stride = 1;
- if (chip->type_reg_stride)
- d->type_reg_stride = chip->type_reg_stride;
+ if (chip->get_irq_reg)
+ d->get_irq_reg = chip->get_irq_reg;
else
- d->type_reg_stride = 1;
+ d->get_irq_reg = regmap_irq_get_irq_reg_linear;
- if (!map->use_single_read && map->reg_stride == 1 &&
- d->irq_reg_stride == 1) {
+ if (regmap_irq_can_bulk_read_status(d)) {
d->status_reg_buf = kmalloc_array(chip->num_regs,
map->format.val_bytes,
GFP_KERNEL);
/* Mask all the interrupts by default */
for (i = 0; i < chip->num_regs; i++) {
d->mask_buf[i] = d->mask_buf_def[i];
- if (!chip->mask_base)
- continue;
- reg = sub_irq_reg(d, d->chip->mask_base, i);
+ if (d->mask_base) {
+ reg = d->get_irq_reg(d, d->mask_base, i);
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i], d->mask_buf[i]);
+ if (ret) {
+ dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+ reg, ret);
+ goto err_alloc;
+ }
+ }
- if (chip->mask_invert)
- ret = regmap_irq_update_bits(d, reg,
- d->mask_buf[i], ~d->mask_buf[i]);
- else if (d->chip->unmask_base) {
- unmask_offset = d->chip->unmask_base -
- d->chip->mask_base;
- ret = regmap_irq_update_bits(d,
- reg + unmask_offset,
- d->mask_buf[i],
- d->mask_buf[i]);
- } else
- ret = regmap_irq_update_bits(d, reg,
- d->mask_buf[i], d->mask_buf[i]);
- if (ret != 0) {
- dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
- reg, ret);
- goto err_alloc;
+ if (d->unmask_base) {
+ reg = d->get_irq_reg(d, d->unmask_base, i);
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i], ~d->mask_buf[i]);
+ if (ret) {
+ dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+ reg, ret);
+ goto err_alloc;
+ }
}
if (!chip->init_ack_masked)
continue;
/* Ack masked but set interrupts */
- reg = sub_irq_reg(d, d->chip->status_base, i);
+ reg = d->get_irq_reg(d, d->chip->status_base, i);
ret = regmap_read(map, reg, &d->status_buf[i]);
if (ret != 0) {
dev_err(map->dev, "Failed to read IRQ status: %d\n",
d->status_buf[i] = ~d->status_buf[i];
if (d->status_buf[i] && (chip->ack_base || chip->use_ack)) {
- reg = sub_irq_reg(d, d->chip->ack_base, i);
+ reg = d->get_irq_reg(d, d->chip->ack_base, i);
if (chip->ack_invert)
ret = regmap_write(map, reg,
~(d->status_buf[i] & d->mask_buf[i]));
if (d->wake_buf) {
for (i = 0; i < chip->num_regs; i++) {
d->wake_buf[i] = d->mask_buf_def[i];
- reg = sub_irq_reg(d, d->chip->wake_base, i);
+ reg = d->get_irq_reg(d, d->chip->wake_base, i);
if (chip->wake_invert)
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
0);
else
- ret = regmap_irq_update_bits(d, reg,
+ ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
d->wake_buf[i]);
if (ret != 0) {
if (chip->num_type_reg && !chip->type_in_mask) {
for (i = 0; i < chip->num_type_reg; ++i) {
- reg = sub_irq_reg(d, d->chip->type_base, i);
+ reg = d->get_irq_reg(d, d->chip->type_base, i);
ret = regmap_read(map, reg, &d->type_buf_def[i]);
kfree(d->virt_buf[i]);
kfree(d->virt_buf);
}
+ if (d->config_buf) {
+ for (i = 0; i < chip->num_config_bases; i++)
+ kfree(d->config_buf[i]);
+ kfree(d->config_buf);
+ }
kfree(d);
return ret;
}
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
{
unsigned int virq;
- int hwirq;
+ int i, hwirq;
if (!d)
return;
kfree(d->mask_buf);
kfree(d->status_reg_buf);
kfree(d->status_buf);
+ if (d->config_buf) {
+ for (i = 0; i < d->chip->num_config_bases; i++)
+ kfree(d->config_buf[i]);
+ kfree(d->config_buf);
+ }
kfree(d);
}
EXPORT_SYMBOL_GPL(regmap_del_irq_chip);
if (config && config->read && config->write) {
map->reg_read = _regmap_bus_read;
+ if (config->reg_update_bits)
+ map->reg_update_bits = config->reg_update_bits;
/* Bulk read/write */
map->read = config->read;
rm_field->reg = reg_field.reg;
rm_field->shift = reg_field.lsb;
rm_field->mask = GENMASK(reg_field.msb, reg_field.lsb);
+
+ WARN_ONCE(rm_field->mask == 0, "invalid empty mask defined\n");
+
rm_field->id_size = reg_field.id_size;
rm_field->id_offset = reg_field.id_offset;
}
}
EXPORT_SYMBOL_GPL(regmap_field_update_bits_base);
+/**
+ * regmap_field_test_bits() - Check if all specified bits are set in a
+ * register field.
+ *
+ * @field: Register field to operate on
+ * @bits: Bits to test
+ *
+ * Returns -1 if the underlying regmap_field_read() fails, 0 if at least one of the
+ * tested bits is not set and 1 if all tested bits are set.
+ */
+int regmap_field_test_bits(struct regmap_field *field, unsigned int bits)
+{
+ unsigned int val, ret;
+
+ ret = regmap_field_read(field, &val);
+ if (ret)
+ return ret;
+
+ return (val & bits) == bits;
+}
+EXPORT_SYMBOL_GPL(regmap_field_test_bits);
+
/**
* regmap_fields_update_bits_base() - Perform a read/modify/write cycle a
* register field with port ID
/*
* hisi_lpc_acpi_set_io_res - set the resources for a child
- * @child: the device node to be updated the I/O resource
+ * @adev: ACPI companion of the device node to be updated the I/O resource
* @hostdev: the device node associated with host controller
* @res: double pointer to be set to the address of translated resources
* @num_res: pointer to variable to hold the number of translated resources
* host-relative address resource. This function will return the translated
* logical PIO addresses for each child devices resources.
*/
-static int hisi_lpc_acpi_set_io_res(struct device *child,
+static int hisi_lpc_acpi_set_io_res(struct acpi_device *adev,
struct device *hostdev,
const struct resource **res, int *num_res)
{
- struct acpi_device *adev;
- struct acpi_device *host;
+ struct acpi_device *host = to_acpi_device(adev->dev.parent);
struct resource_entry *rentry;
LIST_HEAD(resource_list);
struct resource *resources;
int count;
int i;
- if (!child || !hostdev)
- return -EINVAL;
-
- host = to_acpi_device(hostdev);
- adev = to_acpi_device(child);
-
if (!adev->status.present) {
- dev_dbg(child, "device is not present\n");
+ dev_dbg(&adev->dev, "device is not present\n");
return -EIO;
}
if (acpi_device_enumerated(adev)) {
- dev_dbg(child, "has been enumerated\n");
+ dev_dbg(&adev->dev, "has been enumerated\n");
return -EIO;
}
*/
count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (count <= 0) {
- dev_dbg(child, "failed to get resources\n");
+ dev_dbg(&adev->dev, "failed to get resources\n");
return count ? count : -EIO;
}
continue;
ret = hisi_lpc_acpi_xlat_io_res(adev, host, &resources[i]);
if (ret) {
- dev_err(child, "translate IO range %pR failed (%d)\n",
+ dev_err(&adev->dev, "translate IO range %pR failed (%d)\n",
&resources[i], ret);
return ret;
}
return 0;
}
+static int hisi_lpc_acpi_clear_enumerated(struct acpi_device *adev, void *not_used)
+{
+ acpi_device_clear_enumerated(adev);
+ return 0;
+}
+
struct hisi_lpc_acpi_cell {
const char *hid;
const char *name;
static void hisi_lpc_acpi_remove(struct device *hostdev)
{
- struct acpi_device *adev = ACPI_COMPANION(hostdev);
- struct acpi_device *child;
-
device_for_each_child(hostdev, NULL, hisi_lpc_acpi_remove_subdev);
-
- list_for_each_entry(child, &adev->children, node)
- acpi_device_clear_enumerated(child);
+ acpi_dev_for_each_child(ACPI_COMPANION(hostdev),
+ hisi_lpc_acpi_clear_enumerated, NULL);
}
-/*
- * hisi_lpc_acpi_probe - probe children for ACPI FW
- * @hostdev: LPC host device pointer
- *
- * Returns 0 when successful, and a negative value for failure.
- *
- * Create a platform device per child, fixing up the resources
- * from bus addresses to Logical PIO addresses.
- *
- */
-static int hisi_lpc_acpi_probe(struct device *hostdev)
+static int hisi_lpc_acpi_add_child(struct acpi_device *child, void *data)
{
- struct acpi_device *adev = ACPI_COMPANION(hostdev);
- struct acpi_device *child;
+ const char *hid = acpi_device_hid(child);
+ struct device *hostdev = data;
+ const struct hisi_lpc_acpi_cell *cell;
+ struct platform_device *pdev;
+ const struct resource *res;
+ bool found = false;
+ int num_res;
int ret;
- /* Only consider the children of the host */
- list_for_each_entry(child, &adev->children, node) {
- const char *hid = acpi_device_hid(child);
- const struct hisi_lpc_acpi_cell *cell;
- struct platform_device *pdev;
- const struct resource *res;
- bool found = false;
- int num_res;
-
- ret = hisi_lpc_acpi_set_io_res(&child->dev, &adev->dev, &res,
- &num_res);
- if (ret) {
- dev_warn(hostdev, "set resource fail (%d)\n", ret);
- goto fail;
- }
+ ret = hisi_lpc_acpi_set_io_res(child, hostdev, &res, &num_res);
+ if (ret) {
+ dev_warn(hostdev, "set resource fail (%d)\n", ret);
+ return ret;
+ }
- cell = (struct hisi_lpc_acpi_cell []){
- /* ipmi */
- {
- .hid = "IPI0001",
- .name = "hisi-lpc-ipmi",
- },
- /* 8250-compatible uart */
- {
- .hid = "HISI1031",
- .name = "serial8250",
- .pdata = (struct plat_serial8250_port []) {
- {
- .iobase = res->start,
- .uartclk = 1843200,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF,
- },
- {}
+ cell = (struct hisi_lpc_acpi_cell []){
+ /* ipmi */
+ {
+ .hid = "IPI0001",
+ .name = "hisi-lpc-ipmi",
+ },
+ /* 8250-compatible uart */
+ {
+ .hid = "HISI1031",
+ .name = "serial8250",
+ .pdata = (struct plat_serial8250_port []) {
+ {
+ .iobase = res->start,
+ .uartclk = 1843200,
+ .iotype = UPIO_PORT,
+ .flags = UPF_BOOT_AUTOCONF,
},
- .pdata_size = 2 *
- sizeof(struct plat_serial8250_port),
+ {}
},
- {}
- };
-
- for (; cell && cell->name; cell++) {
- if (!strcmp(cell->hid, hid)) {
- found = true;
- break;
- }
- }
-
- if (!found) {
- dev_warn(hostdev,
- "could not find cell for child device (%s), discarding\n",
- hid);
- continue;
+ .pdata_size = 2 *
+ sizeof(struct plat_serial8250_port),
+ },
+ {}
+ };
+
+ for (; cell && cell->name; cell++) {
+ if (!strcmp(cell->hid, hid)) {
+ found = true;
+ break;
}
+ }
- pdev = platform_device_alloc(cell->name, PLATFORM_DEVID_AUTO);
- if (!pdev) {
- ret = -ENOMEM;
- goto fail;
- }
+ if (!found) {
+ dev_warn(hostdev,
+ "could not find cell for child device (%s), discarding\n",
+ hid);
+ return 0;
+ }
- pdev->dev.parent = hostdev;
- ACPI_COMPANION_SET(&pdev->dev, child);
+ pdev = platform_device_alloc(cell->name, PLATFORM_DEVID_AUTO);
+ if (!pdev)
+ return -ENOMEM;
- ret = platform_device_add_resources(pdev, res, num_res);
- if (ret)
- goto fail;
+ pdev->dev.parent = hostdev;
+ ACPI_COMPANION_SET(&pdev->dev, child);
- ret = platform_device_add_data(pdev, cell->pdata,
- cell->pdata_size);
- if (ret)
- goto fail;
+ ret = platform_device_add_resources(pdev, res, num_res);
+ if (ret)
+ goto fail;
- ret = platform_device_add(pdev);
- if (ret)
- goto fail;
+ ret = platform_device_add_data(pdev, cell->pdata, cell->pdata_size);
+ if (ret)
+ goto fail;
- acpi_device_set_enumerated(child);
- }
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto fail;
+ acpi_device_set_enumerated(child);
return 0;
fail:
- hisi_lpc_acpi_remove(hostdev);
+ platform_device_put(pdev);
+ return ret;
+}
+
+/*
+ * hisi_lpc_acpi_probe - probe children for ACPI FW
+ * @hostdev: LPC host device pointer
+ *
+ * Returns 0 when successful, and a negative value for failure.
+ *
+ * Create a platform device per child, fixing up the resources
+ * from bus addresses to Logical PIO addresses.
+ *
+ */
+static int hisi_lpc_acpi_probe(struct device *hostdev)
+{
+ int ret;
+
+ /* Only consider the children of the host */
+ ret = acpi_dev_for_each_child(ACPI_COMPANION(hostdev),
+ hisi_lpc_acpi_add_child, hostdev);
+ if (ret)
+ hisi_lpc_acpi_remove(hostdev);
+
return ret;
}
config HW_RANDOM_BCM2835
tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
- ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
config CLK_BCM_63XX
bool "Broadcom BCM63xx clock support"
- depends on ARCH_BCM_63XX || COMPILE_TEST
+ depends on ARCH_BCMBCA || COMPILE_TEST
select COMMON_CLK_IPROC
- default ARCH_BCM_63XX
+ default ARCH_BCMBCA
help
Enable common clock framework support for Broadcom BCM63xx DSL SoCs
based on the ARM architecture
&r_apb2_rsb_clk.common,
&r_apb1_ir_clk.common,
&r_apb1_w1_clk.common,
+ &r_apb1_rtc_clk.common,
&ir_clk.common,
&w1_clk.common,
};
config I8253_LOCK
bool
-config OMAP_DM_TIMER
+config OMAP_DM_SYSTIMER
bool
select TIMER_OF
help
Enables the support for the digicolor timer driver.
+config OMAP_DM_TIMER
+ bool "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
+ default y if ARCH_K3
+ select TIMER_OF
+ help
+ Enables the support for the TI dual-mode timer driver.
+
config DW_APB_TIMER
bool "DW APB timer driver" if COMPILE_TEST
help
help
Enables support for the Tegra driver.
+config TEGRA186_TIMER
+ bool "NVIDIA Tegra186 timer driver"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ depends on WATCHDOG && WATCHDOG_CORE
+ help
+ Enables support for the timers and watchdogs found on NVIDIA
+ Tegra186 and later SoCs.
+
config VT8500_TIMER
bool "VT8500 timer driver" if COMPILE_TEST
depends on HAS_IOMEM
depends on ARM_GLOBAL_TIMER
help
When the ARM global timer initializes, its current rate is declared
- to the kernel and maintained forever. Should it's parent clock
+ to the kernel and maintained forever. Should its parent clock
change, the driver tries to fix the timer's internal prescaler.
On some machs (i.e. Zynq) the initial prescaler value thus poses
bounds about how much the parent clock is allowed to decrease or
obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
-obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm-systimer.o
+obj-$(CONFIG_OMAP_DM_SYSTIMER) += timer-ti-dm-systimer.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_MESON6_TIMER) += timer-meson6.o
obj-$(CONFIG_TEGRA_TIMER) += timer-tegra.o
+obj-$(CONFIG_TEGRA186_TIMER) += timer-tegra186.o
obj-$(CONFIG_VT8500_TIMER) += timer-vt8500.o
obj-$(CONFIG_NSPIRE_TIMER) += timer-zevio.o
obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o
.compatible = "renesas,rcar-gen3-cmt1",
.data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
},
+ {
+ .compatible = "renesas,rcar-gen4-cmt0",
+ .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen4-cmt1",
+ .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+ },
{ }
};
MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
#define TIMER_SYNC_TICKS (3)
+/* cpux mcusys wrapper */
+#define CPUX_CON_REG 0x0
+#define CPUX_IDX_REG 0x4
+
+/* cpux */
+#define CPUX_IDX_GLOBAL_CTRL 0x0
+ #define CPUX_ENABLE BIT(0)
+ #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
+ #define CPUX_CLK_DIV1 BIT(8)
+ #define CPUX_CLK_DIV2 BIT(9)
+ #define CPUX_CLK_DIV4 BIT(10)
+#define CPUX_IDX_GLOBAL_IRQ 0x30
+
/* gpt */
#define GPT_IRQ_EN_REG 0x00
#define GPT_IRQ_ENABLE(val) BIT((val) - 1)
static void __iomem *gpt_sched_reg __read_mostly;
+static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ return readl(timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ writel(val, timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
+{
+ const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
+ u32 val;
+
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
+
+ if (enable)
+ val |= *irq_mask;
+ else
+ val &= ~(*irq_mask);
+
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
+}
+
+static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ /* Clear any irq */
+ mtk_cpux_set_irq(to_timer_of(clkevt), false);
+
+ /*
+ * Disabling CPUXGPT timer will crash the platform, especially
+ * if Trusted Firmware is using it (usually, for sleep states),
+ * so we only mask the IRQ and call it a day.
+ */
+ return 0;
+}
+
+static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
+{
+ mtk_cpux_set_irq(to_timer_of(clkevt), true);
+ return 0;
+}
+
static void mtk_syst_ack_irq(struct timer_of *to)
{
/* Clear and disable interrupt */
},
};
+static int __init mtk_cpux_init(struct device_node *node)
+{
+ static struct timer_of to_cpux;
+ u32 freq, val;
+ int ret;
+
+ /*
+ * There are per-cpu interrupts for the CPUX General Purpose Timer
+ * but since this timer feeds the AArch64 System Timer we can rely
+ * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
+ */
+ to_cpux.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+ to_cpux.clkevt.name = "mtk-cpuxgpt";
+ to_cpux.clkevt.rating = 10;
+ to_cpux.clkevt.cpumask = cpu_possible_mask;
+ to_cpux.clkevt.set_state_shutdown = mtk_cpux_clkevt_shutdown;
+ to_cpux.clkevt.tick_resume = mtk_cpux_clkevt_resume;
+
+ /* If this fails, bad things are about to happen... */
+ ret = timer_of_init(node, &to_cpux);
+ if (ret) {
+ WARN(1, "Cannot start CPUX timers.\n");
+ return ret;
+ }
+
+ /*
+ * Check if we're given a clock with the right frequency for this
+ * timer, otherwise warn but keep going with the setup anyway, as
+ * that makes it possible to still boot the kernel, even though
+ * it may not work correctly (random lockups, etc).
+ * The reason behind this is that having an early UART may not be
+ * possible for everyone and this gives a chance to retrieve kmsg
+ * for eventual debugging even on consumer devices.
+ */
+ freq = timer_of_rate(&to_cpux);
+ if (freq > 13000000)
+ WARN(1, "Requested unsupported timer frequency %u\n", freq);
+
+ /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
+ val &= ~CPUX_CLK_DIV_MASK;
+ val |= CPUX_CLK_DIV2;
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
+
+ /* Enable all CPUXGPT timers */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
+ mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
+
+ clockevents_config_and_register(&to_cpux.clkevt, timer_of_rate(&to_cpux),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ return 0;
+}
+
static int __init mtk_syst_init(struct device_node *node)
{
int ret;
}
TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
+TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);
};
/**
- * mchp_pit64b_clkevt - PIT64B clockevent data structure
+ * struct mchp_pit64b_clkevt - PIT64B clockevent data structure
* @timer: PIT64B timer
* @clkevt: clockevent
*/
struct mchp_pit64b_clkevt, clkevt))
/**
- * mchp_pit64b_clksrc - PIT64B clocksource data structure
+ * struct mchp_pit64b_clksrc - PIT64B clocksource data structure
* @timer: PIT64B timer
* @clksrc: clocksource
*/
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+ if (!clockevent_state_detached(cedev))
+ mchp_pit64b_suspend(timer);
return 0;
}
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
MCHP_PIT64B_IER_PERIOD);
return 0;
}
-static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
- struct clock_event_device *cedev)
+static int mchp_pit64b_clkevt_set_oneshot(struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
+ mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_ONE_SHOT,
MCHP_PIT64B_IER_PERIOD);
return 0;
}
-static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
+static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+ struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- mchp_pit64b_suspend(timer);
-}
-
-static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
-{
- struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+ mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ MCHP_PIT64B_IER_PERIOD);
- mchp_pit64b_resume(timer);
+ return 0;
}
static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
}
/**
- * mchp_pit64b_init_mode - prepare PIT64B mode register value to be used at
- * runtime; this includes prescaler and SGCLK bit
+ * mchp_pit64b_init_mode() - prepare PIT64B mode register value to be used at
+ * runtime; this includes prescaler and SGCLK bit
+ * @timer: pointer to pit64b timer to init
+ * @max_rate: maximum rate that timer's clock could use
*
* PIT64B timer may be fed by gclk or pclk. When gclk is used its rate has to
* be at least 3 times lower that pclk's rate. pclk rate is fixed, gclk rate
if (!cs)
return -ENOMEM;
+ mchp_pit64b_resume(timer);
mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
mchp_pit64b_cs_base = timer->base;
pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
/* Stop timer. */
- writel_relaxed(MCHP_PIT64B_CR_SWRST,
- timer->base + MCHP_PIT64B_CR);
+ mchp_pit64b_suspend(timer);
kfree(cs);
return ret;
ce->clkevt.rating = 150;
ce->clkevt.set_state_shutdown = mchp_pit64b_clkevt_shutdown;
ce->clkevt.set_state_periodic = mchp_pit64b_clkevt_set_periodic;
+ ce->clkevt.set_state_oneshot = mchp_pit64b_clkevt_set_oneshot;
ce->clkevt.set_next_event = mchp_pit64b_clkevt_set_next_event;
- ce->clkevt.suspend = mchp_pit64b_clkevt_suspend;
- ce->clkevt.resume = mchp_pit64b_clkevt_resume;
ce->clkevt.cpumask = cpumask_of(0);
ce->clkevt.irq = irq;
if (ret)
goto irq_unmap;
- ret = clk_prepare_enable(timer.pclk);
- if (ret)
- goto irq_unmap;
-
- if (timer.mode & MCHP_PIT64B_MR_SGCLK) {
- ret = clk_prepare_enable(timer.gclk);
- if (ret)
- goto pclk_unprepare;
-
+ if (timer.mode & MCHP_PIT64B_MR_SGCLK)
clk_rate = clk_get_rate(timer.gclk);
- } else {
+ else
clk_rate = clk_get_rate(timer.pclk);
- }
clk_rate = clk_rate / (MCHP_PIT64B_MODE_TO_PRES(timer.mode) + 1);
if (clkevt)
ret = mchp_pit64b_init_clksrc(&timer, clk_rate);
if (ret)
- goto gclk_unprepare;
+ goto irq_unmap;
return 0;
-gclk_unprepare:
- if (timer.mode & MCHP_PIT64B_MR_SGCLK)
- clk_disable_unprepare(timer.gclk);
-pclk_unprepare:
- clk_disable_unprepare(timer.pclk);
irq_unmap:
irq_dispose_mapping(irq);
io_unmap:
static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+ struct clock_event_device *evt = dev_id;
struct timer_of *to = to_timer_of(evt);
sun4i_timer_clear_interrupt(timer_of_base(to));
static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
{
- struct sun5i_timer_clkevt *ce = (struct sun5i_timer_clkevt *)dev_id;
+ struct sun5i_timer_clkevt *ce = dev_id;
writel(0x1, ce->timer.base + TIMER_IRQ_ST_REG);
ce->clkevt.event_handler(&ce->clkevt);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+/* shared registers */
+#define TKETSC0 0x000
+#define TKETSC1 0x004
+#define TKEUSEC 0x008
+#define TKEOSC 0x00c
+
+#define TKEIE(x) (0x100 + ((x) * 4))
+#define TKEIE_WDT_MASK(x, y) ((y) << (16 + 4 * (x)))
+
+/* timer registers */
+#define TMRCR 0x000
+#define TMRCR_ENABLE BIT(31)
+#define TMRCR_PERIODIC BIT(30)
+#define TMRCR_PTV(x) ((x) & 0x0fffffff)
+
+#define TMRSR 0x004
+#define TMRSR_INTR_CLR BIT(30)
+
+#define TMRCSSR 0x008
+#define TMRCSSR_SRC_USEC (0 << 0)
+
+/* watchdog registers */
+#define WDTCR 0x000
+#define WDTCR_SYSTEM_POR_RESET_ENABLE BIT(16)
+#define WDTCR_SYSTEM_DEBUG_RESET_ENABLE BIT(15)
+#define WDTCR_REMOTE_INT_ENABLE BIT(14)
+#define WDTCR_LOCAL_FIQ_ENABLE BIT(13)
+#define WDTCR_LOCAL_INT_ENABLE BIT(12)
+#define WDTCR_PERIOD_MASK (0xff << 4)
+#define WDTCR_PERIOD(x) (((x) & 0xff) << 4)
+#define WDTCR_TIMER_SOURCE_MASK 0xf
+#define WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
+
+#define WDTCMDR 0x008
+#define WDTCMDR_DISABLE_COUNTER BIT(1)
+#define WDTCMDR_START_COUNTER BIT(0)
+
+#define WDTUR 0x00c
+#define WDTUR_UNLOCK_PATTERN 0x0000c45a
+
+struct tegra186_timer_soc {
+ unsigned int num_timers;
+ unsigned int num_wdts;
+};
+
+struct tegra186_tmr {
+ struct tegra186_timer *parent;
+ void __iomem *regs;
+ unsigned int index;
+ unsigned int hwirq;
+};
+
+struct tegra186_wdt {
+ struct watchdog_device base;
+
+ void __iomem *regs;
+ unsigned int index;
+ bool locked;
+
+ struct tegra186_tmr *tmr;
+};
+
+static inline struct tegra186_wdt *to_tegra186_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct tegra186_wdt, base);
+}
+
+struct tegra186_timer {
+ const struct tegra186_timer_soc *soc;
+ struct device *dev;
+ void __iomem *regs;
+
+ struct tegra186_wdt *wdt;
+ struct clocksource usec;
+ struct clocksource tsc;
+ struct clocksource osc;
+};
+
+static void tmr_writel(struct tegra186_tmr *tmr, u32 value, unsigned int offset)
+{
+ writel_relaxed(value, tmr->regs + offset);
+}
+
+static void wdt_writel(struct tegra186_wdt *wdt, u32 value, unsigned int offset)
+{
+ writel_relaxed(value, wdt->regs + offset);
+}
+
+static u32 wdt_readl(struct tegra186_wdt *wdt, unsigned int offset)
+{
+ return readl_relaxed(wdt->regs + offset);
+}
+
+static struct tegra186_tmr *tegra186_tmr_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000 + index * 0x10000;
+ struct tegra186_tmr *tmr;
+
+ tmr = devm_kzalloc(tegra->dev, sizeof(*tmr), GFP_KERNEL);
+ if (!tmr)
+ return ERR_PTR(-ENOMEM);
+
+ tmr->parent = tegra;
+ tmr->regs = tegra->regs + offset;
+ tmr->index = index;
+ tmr->hwirq = 0;
+
+ return tmr;
+}
+
+static const struct watchdog_info tegra186_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .identity = "NVIDIA Tegra186 WDT",
+};
+
+static void tegra186_wdt_disable(struct tegra186_wdt *wdt)
+{
+ /* unlock and disable the watchdog */
+ wdt_writel(wdt, WDTUR_UNLOCK_PATTERN, WDTUR);
+ wdt_writel(wdt, WDTCMDR_DISABLE_COUNTER, WDTCMDR);
+
+ /* disable timer */
+ tmr_writel(wdt->tmr, 0, TMRCR);
+}
+
+static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
+{
+ struct tegra186_timer *tegra = wdt->tmr->parent;
+ u32 value;
+
+ /* unmask hardware IRQ, this may have been lost across powergate */
+ value = TKEIE_WDT_MASK(wdt->index, 1);
+ writel(value, tegra->regs + TKEIE(wdt->tmr->hwirq));
+
+ /* clear interrupt */
+ tmr_writel(wdt->tmr, TMRSR_INTR_CLR, TMRSR);
+
+ /* select microsecond source */
+ tmr_writel(wdt->tmr, TMRCSSR_SRC_USEC, TMRCSSR);
+
+ /* configure timer (system reset happens on the fifth expiration) */
+ value = TMRCR_PTV(wdt->base.timeout * USEC_PER_SEC / 5) |
+ TMRCR_PERIODIC | TMRCR_ENABLE;
+ tmr_writel(wdt->tmr, value, TMRCR);
+
+ if (!wdt->locked) {
+ value = wdt_readl(wdt, WDTCR);
+
+ /* select the proper timer source */
+ value &= ~WDTCR_TIMER_SOURCE_MASK;
+ value |= WDTCR_TIMER_SOURCE(wdt->tmr->index);
+
+ /* single timer period since that's already configured */
+ value &= ~WDTCR_PERIOD_MASK;
+ value |= WDTCR_PERIOD(1);
+
+ /* enable local interrupt for WDT petting */
+ value |= WDTCR_LOCAL_INT_ENABLE;
+
+ /* enable local FIQ and remote interrupt for debug dump */
+ if (0)
+ value |= WDTCR_REMOTE_INT_ENABLE |
+ WDTCR_LOCAL_FIQ_ENABLE;
+
+ /* enable system debug reset (doesn't properly reboot) */
+ if (0)
+ value |= WDTCR_SYSTEM_DEBUG_RESET_ENABLE;
+
+ /* enable system POR reset */
+ value |= WDTCR_SYSTEM_POR_RESET_ENABLE;
+
+ wdt_writel(wdt, value, WDTCR);
+ }
+
+ wdt_writel(wdt, WDTCMDR_START_COUNTER, WDTCMDR);
+}
+
+static int tegra186_wdt_start(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_stop(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_ping(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ if (watchdog_active(&wdt->base))
+ tegra186_wdt_disable(wdt);
+
+ wdt->base.timeout = timeout;
+
+ if (watchdog_active(&wdt->base))
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static const struct watchdog_ops tegra186_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = tegra186_wdt_start,
+ .stop = tegra186_wdt_stop,
+ .ping = tegra186_wdt_ping,
+ .set_timeout = tegra186_wdt_set_timeout,
+};
+
+static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000, source;
+ struct tegra186_wdt *wdt;
+ u32 value;
+ int err;
+
+ offset += tegra->soc->num_timers * 0x10000 + index * 0x10000;
+
+ wdt = devm_kzalloc(tegra->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return ERR_PTR(-ENOMEM);
+
+ wdt->regs = tegra->regs + offset;
+ wdt->index = index;
+
+ /* read the watchdog configuration since it might be locked down */
+ value = wdt_readl(wdt, WDTCR);
+
+ if (value & WDTCR_LOCAL_INT_ENABLE)
+ wdt->locked = true;
+
+ source = value & WDTCR_TIMER_SOURCE_MASK;
+
+ wdt->tmr = tegra186_tmr_create(tegra, source);
+ if (IS_ERR(wdt->tmr))
+ return ERR_CAST(wdt->tmr);
+
+ wdt->base.info = &tegra186_wdt_info;
+ wdt->base.ops = &tegra186_wdt_ops;
+ wdt->base.min_timeout = 1;
+ wdt->base.max_timeout = 255;
+ wdt->base.parent = tegra->dev;
+
+ err = watchdog_init_timeout(&wdt->base, 5, tegra->dev);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to initialize timeout: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ err = devm_watchdog_register_device(tegra->dev, &wdt->base);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to register WDT: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ return wdt;
+}
+
+static u64 tegra186_timer_tsc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ tsc);
+ u32 hi, lo, ss;
+
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+
+ /*
+ * The 56-bit value of the TSC is spread across two registers that are
+ * not synchronized. In order to read them atomically, ensure that the
+ * high 24 bits match before and after reading the low 32 bits.
+ */
+ do {
+ /* snapshot the high 24 bits */
+ ss = hi;
+
+ lo = readl_relaxed(tegra->regs + TKETSC0);
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+ } while (hi != ss);
+
+ return (u64)hi << 32 | lo;
+}
+
+static int tegra186_timer_tsc_init(struct tegra186_timer *tegra)
+{
+ tegra->tsc.name = "tsc";
+ tegra->tsc.rating = 300;
+ tegra->tsc.read = tegra186_timer_tsc_read;
+ tegra->tsc.mask = CLOCKSOURCE_MASK(56);
+ tegra->tsc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->tsc, 31250000);
+}
+
+static u64 tegra186_timer_osc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ osc);
+
+ return readl_relaxed(tegra->regs + TKEOSC);
+}
+
+static int tegra186_timer_osc_init(struct tegra186_timer *tegra)
+{
+ tegra->osc.name = "osc";
+ tegra->osc.rating = 300;
+ tegra->osc.read = tegra186_timer_osc_read;
+ tegra->osc.mask = CLOCKSOURCE_MASK(32);
+ tegra->osc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->osc, 38400000);
+}
+
+static u64 tegra186_timer_usec_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ usec);
+
+ return readl_relaxed(tegra->regs + TKEUSEC);
+}
+
+static int tegra186_timer_usec_init(struct tegra186_timer *tegra)
+{
+ tegra->usec.name = "usec";
+ tegra->usec.rating = 300;
+ tegra->usec.read = tegra186_timer_usec_read;
+ tegra->usec.mask = CLOCKSOURCE_MASK(32);
+ tegra->usec.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->usec, USEC_PER_SEC);
+}
+
+static irqreturn_t tegra186_timer_irq(int irq, void *data)
+{
+ struct tegra186_timer *tegra = data;
+
+ if (watchdog_active(&tegra->wdt->base)) {
+ tegra186_wdt_disable(tegra->wdt);
+ tegra186_wdt_enable(tegra->wdt);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tegra186_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tegra186_timer *tegra;
+ unsigned int irq;
+ int err;
+
+ tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ tegra->soc = of_device_get_match_data(dev);
+ dev_set_drvdata(dev, tegra);
+ tegra->dev = dev;
+
+ tegra->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ err = platform_get_irq(pdev, 0);
+ if (err < 0)
+ return err;
+
+ irq = err;
+
+ /* create a watchdog using a preconfigured timer */
+ tegra->wdt = tegra186_wdt_create(tegra, 0);
+ if (IS_ERR(tegra->wdt)) {
+ err = PTR_ERR(tegra->wdt);
+ dev_err(dev, "failed to create WDT: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_tsc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register TSC counter: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_osc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register OSC counter: %d\n", err);
+ goto unregister_tsc;
+ }
+
+ err = tegra186_timer_usec_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register USEC counter: %d\n", err);
+ goto unregister_osc;
+ }
+
+ err = devm_request_irq(dev, irq, tegra186_timer_irq, 0,
+ "tegra186-timer", tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to request IRQ#%u: %d\n", irq, err);
+ goto unregister_usec;
+ }
+
+ return 0;
+
+unregister_usec:
+ clocksource_unregister(&tegra->usec);
+unregister_osc:
+ clocksource_unregister(&tegra->osc);
+unregister_tsc:
+ clocksource_unregister(&tegra->tsc);
+ return err;
+}
+
+static int tegra186_timer_remove(struct platform_device *pdev)
+{
+ struct tegra186_timer *tegra = platform_get_drvdata(pdev);
+
+ clocksource_unregister(&tegra->usec);
+ clocksource_unregister(&tegra->osc);
+ clocksource_unregister(&tegra->tsc);
+
+ return 0;
+}
+
+static int __maybe_unused tegra186_timer_suspend(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (watchdog_active(&tegra->wdt->base))
+ tegra186_wdt_disable(tegra->wdt);
+
+ return 0;
+}
+
+static int __maybe_unused tegra186_timer_resume(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (watchdog_active(&tegra->wdt->base))
+ tegra186_wdt_enable(tegra->wdt);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra186_timer_pm_ops, tegra186_timer_suspend,
+ tegra186_timer_resume);
+
+static const struct tegra186_timer_soc tegra186_timer = {
+ .num_timers = 10,
+ .num_wdts = 3,
+};
+
+static const struct tegra186_timer_soc tegra234_timer = {
+ .num_timers = 16,
+ .num_wdts = 3,
+};
+
+static const struct of_device_id tegra186_timer_of_match[] = {
+ { .compatible = "nvidia,tegra186-timer", .data = &tegra186_timer },
+ { .compatible = "nvidia,tegra234-timer", .data = &tegra234_timer },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra186_timer_of_match);
+
+static struct platform_driver tegra186_wdt_driver = {
+ .driver = {
+ .name = "tegra186-timer",
+ .pm = &tegra186_timer_pm_ops,
+ .of_match_table = tegra186_timer_of_match,
+ },
+ .probe = tegra186_timer_probe,
+ .remove = tegra186_timer_remove,
+};
+module_platform_driver(tegra186_wdt_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 timers driver");
+MODULE_LICENSE("GPL v2");
REQUEST_BY_NODE,
};
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+ int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = readl_relaxed(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer: pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+ if (timer->posted)
+ return;
+
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+ return;
+ }
+
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED, 0);
+ timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+ timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_stat);
+}
+
/**
* omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
* @timer: timer pointer over which read operation to perform
.timer_ops = &dmtimer_ops,
};
+static const struct dmtimer_platform_data am6_pdata = {
+ .timer_ops = &dmtimer_ops,
+};
+
static const struct of_device_id omap_timer_match[] = {
{
.compatible = "ti,omap2420-timer",
.compatible = "ti,dm816-timer",
.data = &omap3plus_pdata,
},
+ {
+ .compatible = "ti,am654-timer",
+ .data = &am6_pdata,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_timer_match);
# ARM CPU Idle drivers
#
config ARM_CPUIDLE
- bool "Generic ARM/ARM64 CPU idle Driver"
+ bool "Generic ARM CPU idle Driver"
+ depends on ARM
select DT_IDLE_STATES
select CPU_IDLE_MULTIPLE_DRIVERS
help
dmi_memdev_name(handle, &bank, &device);
- /* both strings must be non-zero */
- if (bank && *bank && device && *device)
- snprintf(dimm->label, sizeof(dimm->label), "%s %s", bank, device);
+ /*
+ * Set to a NULL string when both bank and device are zero. In this case,
+ * the label assigned by default will be preserved.
+ */
+ snprintf(dimm->label, sizeof(dimm->label), "%s%s%s",
+ (bank && *bank) ? bank : "",
+ (bank && *bank && device && *device) ? " " : "",
+ (device && *device) ? device : "");
}
static void assign_dmi_dimm_info(struct dimm_info *dimm, struct memdev_dmi_entry *entry)
memset(p, 0, sizeof(*p));
}
+static void enable_intr(struct synps_edac_priv *priv)
+{
+ /* Enable UE/CE Interrupts */
+ if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+ writel(DDR_UE_MASK | DDR_CE_MASK,
+ priv->baseaddr + ECC_CLR_OFST);
+ else
+ writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+ priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+
+}
+
+static void disable_intr(struct synps_edac_priv *priv)
+{
+ /* Disable UE/CE Interrupts */
+ if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+ writel(0x0, priv->baseaddr + ECC_CLR_OFST);
+ else
+ writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+ priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
+}
+
/**
* intr_handler - Interrupt Handler for ECC interrupts.
* @irq: IRQ number.
/* v3.0 of the controller does not have this register */
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ else
+ enable_intr(priv);
+
return IRQ_HANDLED;
}
init_csrows(mci);
}
-static void enable_intr(struct synps_edac_priv *priv)
-{
- /* Enable UE/CE Interrupts */
- if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
- writel(DDR_UE_MASK | DDR_CE_MASK,
- priv->baseaddr + ECC_CLR_OFST);
- else
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
-
-}
-
-static void disable_intr(struct synps_edac_priv *priv)
-{
- /* Disable UE/CE Interrupts */
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
-}
-
static int setup_irq(struct mem_ctl_info *mci,
struct platform_device *pdev)
{
will be called scmi_pm_domain. Note this may needed early in boot
before rootfs may be available.
+config ARM_SCMI_POWER_CONTROL
+ tristate "SCMI system power control driver"
+ depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+ help
+ This enables System Power control logic which binds system shutdown or
+ reboot actions to SCMI System Power notifications generated by SCP
+ firmware.
+
+ This driver can also be built as a module. If so, the module will be
+ called scmi_power_control. Note this may needed early in boot to catch
+ early shutdown/reboot SCMI requests.
+
endmenu
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
-scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
+scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o
scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
$(scmi-transport-y)
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
+obj-$(CONFIG_ARM_SCMI_POWER_CONTROL) += scmi_power_control.o
ifeq ($(CONFIG_THUMB2_KERNEL)$(CONFIG_CC_IS_CLANG),yy)
# The use of R7 in the SMCCC conflicts with the compiler's use of R7 as a frame
#include <linux/export.h>
#include <linux/idr.h>
#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/hashtable.h>
static DEFINE_IDR(scmi_requested_devices);
static DEFINE_MUTEX(scmi_requested_devices_mtx);
+/* Track globally the creation of SCMI SystemPower related devices */
+static bool scmi_syspower_registered;
+/* Protect access to scmi_syspower_registered */
+static DEFINE_MUTEX(scmi_syspower_mtx);
+
struct scmi_requested_dev {
const struct scmi_device_id *id_table;
struct list_head node;
smp_store_mb(xfer->priv, priv);
info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
xfer);
+
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "NOTI",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
+
scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
smp_store_mb(xfer->priv, priv);
info->desc->ops->fetch_response(cinfo, xfer);
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
+ xfer->hdr.type == MSG_TYPE_DELAYED_RESP ?
+ "DLYD" : "RESP",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
+
trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
xfer->hdr.protocol_id, xfer->hdr.seq,
xfer->hdr.type);
xfer->state = SCMI_XFER_RESP_OK;
}
spin_unlock_irqrestore(&xfer->lock, flags);
+
+ /* Trace polled replies. */
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
+ "RESP",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
}
} else {
/* And we wait for the response. */
return ret;
}
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "CMND",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->tx.buf, xfer->tx.len);
+
ret = scmi_wait_for_message_response(cinfo, xfer);
if (!ret && xfer->hdr.status)
ret = scmi_to_linux_errno(xfer->hdr.status);
return ret;
}
+struct scmi_msg_get_fc_info {
+ __le32 domain;
+ __le32 message_id;
+};
+
+struct scmi_msg_resp_desc_fc {
+ __le32 attr;
+#define SUPPORTS_DOORBELL(x) ((x) & BIT(0))
+#define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x))
+ __le32 rate_limit;
+ __le32 chan_addr_low;
+ __le32 chan_addr_high;
+ __le32 chan_size;
+ __le32 db_addr_low;
+ __le32 db_addr_high;
+ __le32 db_set_lmask;
+ __le32 db_set_hmask;
+ __le32 db_preserve_lmask;
+ __le32 db_preserve_hmask;
+};
+
+static void
+scmi_common_fastchannel_init(const struct scmi_protocol_handle *ph,
+ u8 describe_id, u32 message_id, u32 valid_size,
+ u32 domain, void __iomem **p_addr,
+ struct scmi_fc_db_info **p_db)
+{
+ int ret;
+ u32 flags;
+ u64 phys_addr;
+ u8 size;
+ void __iomem *addr;
+ struct scmi_xfer *t;
+ struct scmi_fc_db_info *db = NULL;
+ struct scmi_msg_get_fc_info *info;
+ struct scmi_msg_resp_desc_fc *resp;
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ if (!p_addr) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ ret = ph->xops->xfer_get_init(ph, describe_id,
+ sizeof(*info), sizeof(*resp), &t);
+ if (ret)
+ goto err_out;
+
+ info = t->tx.buf;
+ info->domain = cpu_to_le32(domain);
+ info->message_id = cpu_to_le32(message_id);
+
+ /*
+ * Bail out on error leaving fc_info addresses zeroed; this includes
+ * the case in which the requested domain/message_id does NOT support
+ * fastchannels at all.
+ */
+ ret = ph->xops->do_xfer(ph, t);
+ if (ret)
+ goto err_xfer;
+
+ resp = t->rx.buf;
+ flags = le32_to_cpu(resp->attr);
+ size = le32_to_cpu(resp->chan_size);
+ if (size != valid_size) {
+ ret = -EINVAL;
+ goto err_xfer;
+ }
+
+ phys_addr = le32_to_cpu(resp->chan_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
+ addr = devm_ioremap(ph->dev, phys_addr, size);
+ if (!addr) {
+ ret = -EADDRNOTAVAIL;
+ goto err_xfer;
+ }
+
+ *p_addr = addr;
+
+ if (p_db && SUPPORTS_DOORBELL(flags)) {
+ db = devm_kzalloc(ph->dev, sizeof(*db), GFP_KERNEL);
+ if (!db) {
+ ret = -ENOMEM;
+ goto err_db;
+ }
+
+ size = 1 << DOORBELL_REG_WIDTH(flags);
+ phys_addr = le32_to_cpu(resp->db_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
+ addr = devm_ioremap(ph->dev, phys_addr, size);
+ if (!addr) {
+ ret = -EADDRNOTAVAIL;
+ goto err_db_mem;
+ }
+
+ db->addr = addr;
+ db->width = size;
+ db->set = le32_to_cpu(resp->db_set_lmask);
+ db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
+ db->mask = le32_to_cpu(resp->db_preserve_lmask);
+ db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
+
+ *p_db = db;
+ }
+
+ ph->xops->xfer_put(ph, t);
+
+ dev_dbg(ph->dev,
+ "Using valid FC for protocol %X [MSG_ID:%u / RES_ID:%u]\n",
+ pi->proto->id, message_id, domain);
+
+ return;
+
+err_db_mem:
+ devm_kfree(ph->dev, db);
+
+err_db:
+ *p_addr = NULL;
+
+err_xfer:
+ ph->xops->xfer_put(ph, t);
+
+err_out:
+ dev_warn(ph->dev,
+ "Failed to get FC for protocol %X [MSG_ID:%u / RES_ID:%u] - ret:%d. Using regular messaging.\n",
+ pi->proto->id, message_id, domain, ret);
+}
+
+#define SCMI_PROTO_FC_RING_DB(w) \
+do { \
+ u##w val = 0; \
+ \
+ if (db->mask) \
+ val = ioread##w(db->addr) & db->mask; \
+ iowrite##w((u##w)db->set | val, db->addr); \
+} while (0)
+
+static void scmi_common_fastchannel_db_ring(struct scmi_fc_db_info *db)
+{
+ if (!db || !db->addr)
+ return;
+
+ if (db->width == 1)
+ SCMI_PROTO_FC_RING_DB(8);
+ else if (db->width == 2)
+ SCMI_PROTO_FC_RING_DB(16);
+ else if (db->width == 4)
+ SCMI_PROTO_FC_RING_DB(32);
+ else /* db->width == 8 */
+#ifdef CONFIG_64BIT
+ SCMI_PROTO_FC_RING_DB(64);
+#else
+ {
+ u64 val = 0;
+
+ if (db->mask)
+ val = ioread64_hi_lo(db->addr) & db->mask;
+ iowrite64_hi_lo(db->set | val, db->addr);
+ }
+#endif
+}
+
static const struct scmi_proto_helpers_ops helpers_ops = {
.extended_name_get = scmi_common_extended_name_get,
.iter_response_init = scmi_iterator_init,
.iter_response_run = scmi_iterator_run,
+ .fastchannel_init = scmi_common_fastchannel_init,
+ .fastchannel_db_ring = scmi_common_fastchannel_db_ring,
};
/**
scmi_protocol_release(dres->handle, dres->protocol_id);
}
+static struct scmi_protocol_instance __must_check *
+scmi_devres_protocol_instance_get(struct scmi_device *sdev, u8 protocol_id)
+{
+ struct scmi_protocol_instance *pi;
+ struct scmi_protocol_devres *dres;
+
+ dres = devres_alloc(scmi_devm_release_protocol,
+ sizeof(*dres), GFP_KERNEL);
+ if (!dres)
+ return ERR_PTR(-ENOMEM);
+
+ pi = scmi_get_protocol_instance(sdev->handle, protocol_id);
+ if (IS_ERR(pi)) {
+ devres_free(dres);
+ return pi;
+ }
+
+ dres->handle = sdev->handle;
+ dres->protocol_id = protocol_id;
+ devres_add(&sdev->dev, dres);
+
+ return pi;
+}
+
/**
* scmi_devm_protocol_get - Devres managed get protocol operations and handle
* @sdev: A reference to an scmi_device whose embedded struct device is to
struct scmi_protocol_handle **ph)
{
struct scmi_protocol_instance *pi;
- struct scmi_protocol_devres *dres;
- struct scmi_handle *handle = sdev->handle;
if (!ph)
return ERR_PTR(-EINVAL);
- dres = devres_alloc(scmi_devm_release_protocol,
- sizeof(*dres), GFP_KERNEL);
- if (!dres)
- return ERR_PTR(-ENOMEM);
-
- pi = scmi_get_protocol_instance(handle, protocol_id);
- if (IS_ERR(pi)) {
- devres_free(dres);
+ pi = scmi_devres_protocol_instance_get(sdev, protocol_id);
+ if (IS_ERR(pi))
return pi;
- }
-
- dres->handle = handle;
- dres->protocol_id = protocol_id;
- devres_add(&sdev->dev, dres);
*ph = &pi->ph;
return pi->proto->ops;
}
+/**
+ * scmi_devm_protocol_acquire - Devres managed helper to get hold of a protocol
+ * @sdev: A reference to an scmi_device whose embedded struct device is to
+ * be used for devres accounting.
+ * @protocol_id: The protocol being requested.
+ *
+ * Get hold of a protocol accounting for its usage, possibly triggering its
+ * initialization but without getting access to its protocol specific operations
+ * and handle.
+ *
+ * Being a devres based managed method, protocol hold will be automatically
+ * released, and possibly de-initialized on last user, once the SCMI driver
+ * owning the scmi_device is unbound from it.
+ *
+ * Return: 0 on SUCCESS
+ */
+static int __must_check scmi_devm_protocol_acquire(struct scmi_device *sdev,
+ u8 protocol_id)
+{
+ struct scmi_protocol_instance *pi;
+
+ pi = scmi_devres_protocol_instance_get(sdev, protocol_id);
+ if (IS_ERR(pi))
+ return PTR_ERR(pi);
+
+ return 0;
+}
+
static int scmi_devm_protocol_match(struct device *dev, void *res, void *data)
{
struct scmi_protocol_devres *dres = res;
if (sdev)
return sdev;
+ mutex_lock(&scmi_syspower_mtx);
+ if (prot_id == SCMI_PROTOCOL_SYSTEM && scmi_syspower_registered) {
+ dev_warn(info->dev,
+ "SCMI SystemPower protocol device must be unique !\n");
+ mutex_unlock(&scmi_syspower_mtx);
+
+ return NULL;
+ }
+
pr_debug("Creating SCMI device (%s) for protocol %x\n", name, prot_id);
sdev = scmi_device_create(np, info->dev, prot_id, name);
if (!sdev) {
dev_err(info->dev, "failed to create %d protocol device\n",
prot_id);
+ mutex_unlock(&scmi_syspower_mtx);
+
return NULL;
}
if (scmi_txrx_setup(info, &sdev->dev, prot_id)) {
dev_err(&sdev->dev, "failed to setup transport\n");
scmi_device_destroy(sdev);
+ mutex_unlock(&scmi_syspower_mtx);
+
return NULL;
}
+ if (prot_id == SCMI_PROTOCOL_SYSTEM)
+ scmi_syspower_registered = true;
+
+ mutex_unlock(&scmi_syspower_mtx);
+
return sdev;
}
handle = &info->handle;
handle->dev = info->dev;
handle->version = &info->version;
+ handle->devm_protocol_acquire = scmi_devm_protocol_acquire;
handle->devm_protocol_get = scmi_devm_protocol_get;
handle->devm_protocol_put = scmi_devm_protocol_put;
scmi_sensors_register();
scmi_voltage_register();
scmi_system_register();
+ scmi_powercap_register();
return platform_driver_register(&scmi_driver);
}
scmi_sensors_unregister();
scmi_voltage_unregister();
scmi_system_unregister();
+ scmi_powercap_unregister();
scmi_bus_exit();
#include <linux/bits.h>
#include <linux/of.h>
#include <linux/io.h>
-#include <linux/io-64-nonatomic-hi-lo.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/scmi_protocol.h>
#include <linux/sort.h>
+#include <trace/events/scmi.h>
+
#include "protocols.h"
#include "notify.h"
PERF_DOMAIN_NAME_GET = 0xc,
};
+enum {
+ PERF_FC_LEVEL,
+ PERF_FC_LIMIT,
+ PERF_FC_MAX,
+};
+
struct scmi_opp {
u32 perf;
u32 power;
} opp[];
};
-struct scmi_perf_get_fc_info {
- __le32 domain;
- __le32 message_id;
-};
-
-struct scmi_msg_resp_perf_desc_fc {
- __le32 attr;
-#define SUPPORTS_DOORBELL(x) ((x) & BIT(0))
-#define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x))
- __le32 rate_limit;
- __le32 chan_addr_low;
- __le32 chan_addr_high;
- __le32 chan_size;
- __le32 db_addr_low;
- __le32 db_addr_high;
- __le32 db_set_lmask;
- __le32 db_set_hmask;
- __le32 db_preserve_lmask;
- __le32 db_preserve_hmask;
-};
-
-struct scmi_fc_db_info {
- int width;
- u64 set;
- u64 mask;
- void __iomem *addr;
-};
-
-struct scmi_fc_info {
- void __iomem *level_set_addr;
- void __iomem *limit_set_addr;
- void __iomem *level_get_addr;
- void __iomem *limit_get_addr;
- struct scmi_fc_db_info *level_set_db;
- struct scmi_fc_db_info *limit_set_db;
-};
-
struct perf_dom_info {
bool set_limits;
bool set_perf;
return ret;
}
-#define SCMI_PERF_FC_RING_DB(w) \
-do { \
- u##w val = 0; \
- \
- if (db->mask) \
- val = ioread##w(db->addr) & db->mask; \
- iowrite##w((u##w)db->set | val, db->addr); \
-} while (0)
-
-static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db)
-{
- if (!db || !db->addr)
- return;
-
- if (db->width == 1)
- SCMI_PERF_FC_RING_DB(8);
- else if (db->width == 2)
- SCMI_PERF_FC_RING_DB(16);
- else if (db->width == 4)
- SCMI_PERF_FC_RING_DB(32);
- else /* db->width == 8 */
-#ifdef CONFIG_64BIT
- SCMI_PERF_FC_RING_DB(64);
-#else
- {
- u64 val = 0;
-
- if (db->mask)
- val = ioread64_hi_lo(db->addr) & db->mask;
- iowrite64_hi_lo(db->set | val, db->addr);
- }
-#endif
-}
-
static int scmi_perf_mb_limits_set(const struct scmi_protocol_handle *ph,
u32 domain, u32 max_perf, u32 min_perf)
{
if (PROTOCOL_REV_MAJOR(pi->version) >= 0x3 && !max_perf && !min_perf)
return -EINVAL;
- if (dom->fc_info && dom->fc_info->limit_set_addr) {
- iowrite32(max_perf, dom->fc_info->limit_set_addr);
- iowrite32(min_perf, dom->fc_info->limit_set_addr + 4);
- scmi_perf_fc_ring_db(dom->fc_info->limit_set_db);
+ if (dom->fc_info && dom->fc_info[PERF_FC_LIMIT].set_addr) {
+ struct scmi_fc_info *fci = &dom->fc_info[PERF_FC_LIMIT];
+
+ trace_scmi_fc_call(SCMI_PROTOCOL_PERF, PERF_LIMITS_SET,
+ domain, min_perf, max_perf);
+ iowrite32(max_perf, fci->set_addr);
+ iowrite32(min_perf, fci->set_addr + 4);
+ ph->hops->fastchannel_db_ring(fci->set_db);
return 0;
}
struct scmi_perf_info *pi = ph->get_priv(ph);
struct perf_dom_info *dom = pi->dom_info + domain;
- if (dom->fc_info && dom->fc_info->limit_get_addr) {
- *max_perf = ioread32(dom->fc_info->limit_get_addr);
- *min_perf = ioread32(dom->fc_info->limit_get_addr + 4);
+ if (dom->fc_info && dom->fc_info[PERF_FC_LIMIT].get_addr) {
+ struct scmi_fc_info *fci = &dom->fc_info[PERF_FC_LIMIT];
+
+ *max_perf = ioread32(fci->get_addr);
+ *min_perf = ioread32(fci->get_addr + 4);
+ trace_scmi_fc_call(SCMI_PROTOCOL_PERF, PERF_LIMITS_GET,
+ domain, *min_perf, *max_perf);
return 0;
}
struct scmi_perf_info *pi = ph->get_priv(ph);
struct perf_dom_info *dom = pi->dom_info + domain;
- if (dom->fc_info && dom->fc_info->level_set_addr) {
- iowrite32(level, dom->fc_info->level_set_addr);
- scmi_perf_fc_ring_db(dom->fc_info->level_set_db);
+ if (dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr) {
+ struct scmi_fc_info *fci = &dom->fc_info[PERF_FC_LEVEL];
+
+ trace_scmi_fc_call(SCMI_PROTOCOL_PERF, PERF_LEVEL_SET,
+ domain, level, 0);
+ iowrite32(level, fci->set_addr);
+ ph->hops->fastchannel_db_ring(fci->set_db);
return 0;
}
struct scmi_perf_info *pi = ph->get_priv(ph);
struct perf_dom_info *dom = pi->dom_info + domain;
- if (dom->fc_info && dom->fc_info->level_get_addr) {
- *level = ioread32(dom->fc_info->level_get_addr);
+ if (dom->fc_info && dom->fc_info[PERF_FC_LEVEL].get_addr) {
+ *level = ioread32(dom->fc_info[PERF_FC_LEVEL].get_addr);
+ trace_scmi_fc_call(SCMI_PROTOCOL_PERF, PERF_LEVEL_GET,
+ domain, *level, 0);
return 0;
}
return ret;
}
-static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
-{
- if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
- return true;
- if ((msg == PERF_LIMITS_GET || msg == PERF_LIMITS_SET) && size == 8)
- return true;
- return false;
-}
-
-static void
-scmi_perf_domain_desc_fc(const struct scmi_protocol_handle *ph, u32 domain,
- u32 message_id, void __iomem **p_addr,
- struct scmi_fc_db_info **p_db)
-{
- int ret;
- u32 flags;
- u64 phys_addr;
- u8 size;
- void __iomem *addr;
- struct scmi_xfer *t;
- struct scmi_fc_db_info *db;
- struct scmi_perf_get_fc_info *info;
- struct scmi_msg_resp_perf_desc_fc *resp;
-
- if (!p_addr)
- return;
-
- ret = ph->xops->xfer_get_init(ph, PERF_DESCRIBE_FASTCHANNEL,
- sizeof(*info), sizeof(*resp), &t);
- if (ret)
- return;
-
- info = t->tx.buf;
- info->domain = cpu_to_le32(domain);
- info->message_id = cpu_to_le32(message_id);
-
- ret = ph->xops->do_xfer(ph, t);
- if (ret)
- goto err_xfer;
-
- resp = t->rx.buf;
- flags = le32_to_cpu(resp->attr);
- size = le32_to_cpu(resp->chan_size);
- if (!scmi_perf_fc_size_is_valid(message_id, size))
- goto err_xfer;
-
- phys_addr = le32_to_cpu(resp->chan_addr_low);
- phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
- addr = devm_ioremap(ph->dev, phys_addr, size);
- if (!addr)
- goto err_xfer;
- *p_addr = addr;
-
- if (p_db && SUPPORTS_DOORBELL(flags)) {
- db = devm_kzalloc(ph->dev, sizeof(*db), GFP_KERNEL);
- if (!db)
- goto err_xfer;
-
- size = 1 << DOORBELL_REG_WIDTH(flags);
- phys_addr = le32_to_cpu(resp->db_addr_low);
- phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
- addr = devm_ioremap(ph->dev, phys_addr, size);
- if (!addr)
- goto err_xfer;
-
- db->addr = addr;
- db->width = size;
- db->set = le32_to_cpu(resp->db_set_lmask);
- db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
- db->mask = le32_to_cpu(resp->db_preserve_lmask);
- db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
- *p_db = db;
- }
-err_xfer:
- ph->xops->xfer_put(ph, t);
-}
-
static void scmi_perf_domain_init_fc(const struct scmi_protocol_handle *ph,
u32 domain, struct scmi_fc_info **p_fc)
{
struct scmi_fc_info *fc;
- fc = devm_kzalloc(ph->dev, sizeof(*fc), GFP_KERNEL);
+ fc = devm_kcalloc(ph->dev, PERF_FC_MAX, sizeof(*fc), GFP_KERNEL);
if (!fc)
return;
- scmi_perf_domain_desc_fc(ph, domain, PERF_LEVEL_SET,
- &fc->level_set_addr, &fc->level_set_db);
- scmi_perf_domain_desc_fc(ph, domain, PERF_LEVEL_GET,
- &fc->level_get_addr, NULL);
- scmi_perf_domain_desc_fc(ph, domain, PERF_LIMITS_SET,
- &fc->limit_set_addr, &fc->limit_set_db);
- scmi_perf_domain_desc_fc(ph, domain, PERF_LIMITS_GET,
- &fc->limit_get_addr, NULL);
+ ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
+ PERF_LEVEL_SET, 4, domain,
+ &fc[PERF_FC_LEVEL].set_addr,
+ &fc[PERF_FC_LEVEL].set_db);
+
+ ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
+ PERF_LEVEL_GET, 4, domain,
+ &fc[PERF_FC_LEVEL].get_addr, NULL);
+
+ ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
+ PERF_LIMITS_SET, 8, domain,
+ &fc[PERF_FC_LIMIT].set_addr,
+ &fc[PERF_FC_LIMIT].set_db);
+
+ ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
+ PERF_LIMITS_GET, 8, domain,
+ &fc[PERF_FC_LIMIT].get_addr, NULL);
+
*p_fc = fc;
}
dom = pi->dom_info + scmi_dev_domain_id(dev);
- return dom->fc_info && dom->fc_info->level_set_addr;
+ return dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr;
}
static enum scmi_power_scale
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Powercap Protocol
+ *
+ * Copyright (C) 2022 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications POWERCAP - " fmt
+
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/scmi_protocol.h>
+
+#include <trace/events/scmi.h>
+
+#include "protocols.h"
+#include "notify.h"
+
+enum scmi_powercap_protocol_cmd {
+ POWERCAP_DOMAIN_ATTRIBUTES = 0x3,
+ POWERCAP_CAP_GET = 0x4,
+ POWERCAP_CAP_SET = 0x5,
+ POWERCAP_PAI_GET = 0x6,
+ POWERCAP_PAI_SET = 0x7,
+ POWERCAP_DOMAIN_NAME_GET = 0x8,
+ POWERCAP_MEASUREMENTS_GET = 0x9,
+ POWERCAP_CAP_NOTIFY = 0xa,
+ POWERCAP_MEASUREMENTS_NOTIFY = 0xb,
+ POWERCAP_DESCRIBE_FASTCHANNEL = 0xc,
+};
+
+enum {
+ POWERCAP_FC_CAP,
+ POWERCAP_FC_PAI,
+ POWERCAP_FC_MAX,
+};
+
+struct scmi_msg_resp_powercap_domain_attributes {
+ __le32 attributes;
+#define SUPPORTS_POWERCAP_CAP_CHANGE_NOTIFY(x) ((x) & BIT(31))
+#define SUPPORTS_POWERCAP_MEASUREMENTS_CHANGE_NOTIFY(x) ((x) & BIT(30))
+#define SUPPORTS_ASYNC_POWERCAP_CAP_SET(x) ((x) & BIT(29))
+#define SUPPORTS_EXTENDED_NAMES(x) ((x) & BIT(28))
+#define SUPPORTS_POWERCAP_CAP_CONFIGURATION(x) ((x) & BIT(27))
+#define SUPPORTS_POWERCAP_MONITORING(x) ((x) & BIT(26))
+#define SUPPORTS_POWERCAP_PAI_CONFIGURATION(x) ((x) & BIT(25))
+#define SUPPORTS_POWERCAP_FASTCHANNELS(x) ((x) & BIT(22))
+#define POWERCAP_POWER_UNIT(x) \
+ (FIELD_GET(GENMASK(24, 23), (x)))
+#define SUPPORTS_POWER_UNITS_MW(x) \
+ (POWERCAP_POWER_UNIT(x) == 0x2)
+#define SUPPORTS_POWER_UNITS_UW(x) \
+ (POWERCAP_POWER_UNIT(x) == 0x1)
+ u8 name[SCMI_SHORT_NAME_MAX_SIZE];
+ __le32 min_pai;
+ __le32 max_pai;
+ __le32 pai_step;
+ __le32 min_power_cap;
+ __le32 max_power_cap;
+ __le32 power_cap_step;
+ __le32 sustainable_power;
+ __le32 accuracy;
+ __le32 parent_id;
+};
+
+struct scmi_msg_powercap_set_cap_or_pai {
+ __le32 domain;
+ __le32 flags;
+#define CAP_SET_ASYNC BIT(1)
+#define CAP_SET_IGNORE_DRESP BIT(0)
+ __le32 value;
+};
+
+struct scmi_msg_resp_powercap_cap_set_complete {
+ __le32 domain;
+ __le32 power_cap;
+};
+
+struct scmi_msg_resp_powercap_meas_get {
+ __le32 power;
+ __le32 pai;
+};
+
+struct scmi_msg_powercap_notify_cap {
+ __le32 domain;
+ __le32 notify_enable;
+};
+
+struct scmi_msg_powercap_notify_thresh {
+ __le32 domain;
+ __le32 notify_enable;
+ __le32 power_thresh_low;
+ __le32 power_thresh_high;
+};
+
+struct scmi_powercap_cap_changed_notify_payld {
+ __le32 agent_id;
+ __le32 domain_id;
+ __le32 power_cap;
+ __le32 pai;
+};
+
+struct scmi_powercap_meas_changed_notify_payld {
+ __le32 agent_id;
+ __le32 domain_id;
+ __le32 power;
+};
+
+struct scmi_powercap_state {
+ bool meas_notif_enabled;
+ u64 thresholds;
+#define THRESH_LOW(p, id) \
+ (lower_32_bits((p)->states[(id)].thresholds))
+#define THRESH_HIGH(p, id) \
+ (upper_32_bits((p)->states[(id)].thresholds))
+};
+
+struct powercap_info {
+ u32 version;
+ int num_domains;
+ struct scmi_powercap_state *states;
+ struct scmi_powercap_info *powercaps;
+};
+
+static enum scmi_powercap_protocol_cmd evt_2_cmd[] = {
+ POWERCAP_CAP_NOTIFY,
+ POWERCAP_MEASUREMENTS_NOTIFY,
+};
+
+static int scmi_powercap_notify(const struct scmi_protocol_handle *ph,
+ u32 domain, int message_id, bool enable);
+
+static int
+scmi_powercap_attributes_get(const struct scmi_protocol_handle *ph,
+ struct powercap_info *pi)
+{
+ int ret;
+ struct scmi_xfer *t;
+
+ ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, 0,
+ sizeof(u32), &t);
+ if (ret)
+ return ret;
+
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret) {
+ u32 attributes;
+
+ attributes = get_unaligned_le32(t->rx.buf);
+ pi->num_domains = FIELD_GET(GENMASK(15, 0), attributes);
+ }
+
+ ph->xops->xfer_put(ph, t);
+ return ret;
+}
+
+static inline int
+scmi_powercap_validate(unsigned int min_val, unsigned int max_val,
+ unsigned int step_val, bool configurable)
+{
+ if (!min_val || !max_val)
+ return -EPROTO;
+
+ if ((configurable && min_val == max_val) ||
+ (!configurable && min_val != max_val))
+ return -EPROTO;
+
+ if (min_val != max_val && !step_val)
+ return -EPROTO;
+
+ return 0;
+}
+
+static int
+scmi_powercap_domain_attributes_get(const struct scmi_protocol_handle *ph,
+ struct powercap_info *pinfo, u32 domain)
+{
+ int ret;
+ u32 flags;
+ struct scmi_xfer *t;
+ struct scmi_powercap_info *dom_info = pinfo->powercaps + domain;
+ struct scmi_msg_resp_powercap_domain_attributes *resp;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_DOMAIN_ATTRIBUTES,
+ sizeof(domain), sizeof(*resp), &t);
+ if (ret)
+ return ret;
+
+ put_unaligned_le32(domain, t->tx.buf);
+ resp = t->rx.buf;
+
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret) {
+ flags = le32_to_cpu(resp->attributes);
+
+ dom_info->id = domain;
+ dom_info->notify_powercap_cap_change =
+ SUPPORTS_POWERCAP_CAP_CHANGE_NOTIFY(flags);
+ dom_info->notify_powercap_measurement_change =
+ SUPPORTS_POWERCAP_MEASUREMENTS_CHANGE_NOTIFY(flags);
+ dom_info->async_powercap_cap_set =
+ SUPPORTS_ASYNC_POWERCAP_CAP_SET(flags);
+ dom_info->powercap_cap_config =
+ SUPPORTS_POWERCAP_CAP_CONFIGURATION(flags);
+ dom_info->powercap_monitoring =
+ SUPPORTS_POWERCAP_MONITORING(flags);
+ dom_info->powercap_pai_config =
+ SUPPORTS_POWERCAP_PAI_CONFIGURATION(flags);
+ dom_info->powercap_scale_mw =
+ SUPPORTS_POWER_UNITS_MW(flags);
+ dom_info->powercap_scale_uw =
+ SUPPORTS_POWER_UNITS_UW(flags);
+ dom_info->fastchannels =
+ SUPPORTS_POWERCAP_FASTCHANNELS(flags);
+
+ strscpy(dom_info->name, resp->name, SCMI_SHORT_NAME_MAX_SIZE);
+
+ dom_info->min_pai = le32_to_cpu(resp->min_pai);
+ dom_info->max_pai = le32_to_cpu(resp->max_pai);
+ dom_info->pai_step = le32_to_cpu(resp->pai_step);
+ ret = scmi_powercap_validate(dom_info->min_pai,
+ dom_info->max_pai,
+ dom_info->pai_step,
+ dom_info->powercap_pai_config);
+ if (ret) {
+ dev_err(ph->dev,
+ "Platform reported inconsistent PAI config for domain %d - %s\n",
+ dom_info->id, dom_info->name);
+ goto clean;
+ }
+
+ dom_info->min_power_cap = le32_to_cpu(resp->min_power_cap);
+ dom_info->max_power_cap = le32_to_cpu(resp->max_power_cap);
+ dom_info->power_cap_step = le32_to_cpu(resp->power_cap_step);
+ ret = scmi_powercap_validate(dom_info->min_power_cap,
+ dom_info->max_power_cap,
+ dom_info->power_cap_step,
+ dom_info->powercap_cap_config);
+ if (ret) {
+ dev_err(ph->dev,
+ "Platform reported inconsistent CAP config for domain %d - %s\n",
+ dom_info->id, dom_info->name);
+ goto clean;
+ }
+
+ dom_info->sustainable_power =
+ le32_to_cpu(resp->sustainable_power);
+ dom_info->accuracy = le32_to_cpu(resp->accuracy);
+
+ dom_info->parent_id = le32_to_cpu(resp->parent_id);
+ if (dom_info->parent_id != SCMI_POWERCAP_ROOT_ZONE_ID &&
+ (dom_info->parent_id >= pinfo->num_domains ||
+ dom_info->parent_id == dom_info->id)) {
+ dev_err(ph->dev,
+ "Platform reported inconsistent parent ID for domain %d - %s\n",
+ dom_info->id, dom_info->name);
+ ret = -ENODEV;
+ }
+ }
+
+clean:
+ ph->xops->xfer_put(ph, t);
+
+ /*
+ * If supported overwrite short name with the extended one;
+ * on error just carry on and use already provided short name.
+ */
+ if (!ret && SUPPORTS_EXTENDED_NAMES(flags))
+ ph->hops->extended_name_get(ph, POWERCAP_DOMAIN_NAME_GET,
+ domain, dom_info->name,
+ SCMI_MAX_STR_SIZE);
+
+ return ret;
+}
+
+static int scmi_powercap_num_domains_get(const struct scmi_protocol_handle *ph)
+{
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ return pi->num_domains;
+}
+
+static const struct scmi_powercap_info *
+scmi_powercap_dom_info_get(const struct scmi_protocol_handle *ph, u32 domain_id)
+{
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (domain_id >= pi->num_domains)
+ return NULL;
+
+ return pi->powercaps + domain_id;
+}
+
+static int scmi_powercap_xfer_cap_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *power_cap)
+{
+ int ret;
+ struct scmi_xfer *t;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_CAP_GET, sizeof(u32),
+ sizeof(u32), &t);
+ if (ret)
+ return ret;
+
+ put_unaligned_le32(domain_id, t->tx.buf);
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret)
+ *power_cap = get_unaligned_le32(t->rx.buf);
+
+ ph->xops->xfer_put(ph, t);
+
+ return ret;
+}
+
+static int scmi_powercap_cap_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *power_cap)
+{
+ struct scmi_powercap_info *dom;
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (!power_cap || domain_id >= pi->num_domains)
+ return -EINVAL;
+
+ dom = pi->powercaps + domain_id;
+ if (dom->fc_info && dom->fc_info[POWERCAP_FC_CAP].get_addr) {
+ *power_cap = ioread32(dom->fc_info[POWERCAP_FC_CAP].get_addr);
+ trace_scmi_fc_call(SCMI_PROTOCOL_POWERCAP, POWERCAP_CAP_GET,
+ domain_id, *power_cap, 0);
+ return 0;
+ }
+
+ return scmi_powercap_xfer_cap_get(ph, domain_id, power_cap);
+}
+
+static int scmi_powercap_xfer_cap_set(const struct scmi_protocol_handle *ph,
+ const struct scmi_powercap_info *pc,
+ u32 power_cap, bool ignore_dresp)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_powercap_set_cap_or_pai *msg;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_CAP_SET,
+ sizeof(*msg), 0, &t);
+ if (ret)
+ return ret;
+
+ msg = t->tx.buf;
+ msg->domain = cpu_to_le32(pc->id);
+ msg->flags =
+ cpu_to_le32(FIELD_PREP(CAP_SET_ASYNC, !!pc->async_powercap_cap_set) |
+ FIELD_PREP(CAP_SET_IGNORE_DRESP, !!ignore_dresp));
+ msg->value = cpu_to_le32(power_cap);
+
+ if (!pc->async_powercap_cap_set || ignore_dresp) {
+ ret = ph->xops->do_xfer(ph, t);
+ } else {
+ ret = ph->xops->do_xfer_with_response(ph, t);
+ if (!ret) {
+ struct scmi_msg_resp_powercap_cap_set_complete *resp;
+
+ resp = t->rx.buf;
+ if (le32_to_cpu(resp->domain) == pc->id)
+ dev_dbg(ph->dev,
+ "Powercap ID %d CAP set async to %u\n",
+ pc->id,
+ get_unaligned_le32(&resp->power_cap));
+ else
+ ret = -EPROTO;
+ }
+ }
+
+ ph->xops->xfer_put(ph, t);
+ return ret;
+}
+
+static int scmi_powercap_cap_set(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 power_cap,
+ bool ignore_dresp)
+{
+ const struct scmi_powercap_info *pc;
+
+ pc = scmi_powercap_dom_info_get(ph, domain_id);
+ if (!pc || !pc->powercap_cap_config || !power_cap ||
+ power_cap < pc->min_power_cap ||
+ power_cap > pc->max_power_cap)
+ return -EINVAL;
+
+ if (pc->fc_info && pc->fc_info[POWERCAP_FC_CAP].set_addr) {
+ struct scmi_fc_info *fci = &pc->fc_info[POWERCAP_FC_CAP];
+
+ iowrite32(power_cap, fci->set_addr);
+ ph->hops->fastchannel_db_ring(fci->set_db);
+ trace_scmi_fc_call(SCMI_PROTOCOL_POWERCAP, POWERCAP_CAP_SET,
+ domain_id, power_cap, 0);
+ return 0;
+ }
+
+ return scmi_powercap_xfer_cap_set(ph, pc, power_cap, ignore_dresp);
+}
+
+static int scmi_powercap_xfer_pai_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *pai)
+{
+ int ret;
+ struct scmi_xfer *t;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_PAI_GET, sizeof(u32),
+ sizeof(u32), &t);
+ if (ret)
+ return ret;
+
+ put_unaligned_le32(domain_id, t->tx.buf);
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret)
+ *pai = get_unaligned_le32(t->rx.buf);
+
+ ph->xops->xfer_put(ph, t);
+
+ return ret;
+}
+
+static int scmi_powercap_pai_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *pai)
+{
+ struct scmi_powercap_info *dom;
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (!pai || domain_id >= pi->num_domains)
+ return -EINVAL;
+
+ dom = pi->powercaps + domain_id;
+ if (dom->fc_info && dom->fc_info[POWERCAP_FC_PAI].get_addr) {
+ *pai = ioread32(dom->fc_info[POWERCAP_FC_PAI].get_addr);
+ trace_scmi_fc_call(SCMI_PROTOCOL_POWERCAP, POWERCAP_PAI_GET,
+ domain_id, *pai, 0);
+ return 0;
+ }
+
+ return scmi_powercap_xfer_pai_get(ph, domain_id, pai);
+}
+
+static int scmi_powercap_xfer_pai_set(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 pai)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_powercap_set_cap_or_pai *msg;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_PAI_SET,
+ sizeof(*msg), 0, &t);
+ if (ret)
+ return ret;
+
+ msg = t->tx.buf;
+ msg->domain = cpu_to_le32(domain_id);
+ msg->flags = cpu_to_le32(0);
+ msg->value = cpu_to_le32(pai);
+
+ ret = ph->xops->do_xfer(ph, t);
+
+ ph->xops->xfer_put(ph, t);
+ return ret;
+}
+
+static int scmi_powercap_pai_set(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 pai)
+{
+ const struct scmi_powercap_info *pc;
+
+ pc = scmi_powercap_dom_info_get(ph, domain_id);
+ if (!pc || !pc->powercap_pai_config || !pai ||
+ pai < pc->min_pai || pai > pc->max_pai)
+ return -EINVAL;
+
+ if (pc->fc_info && pc->fc_info[POWERCAP_FC_PAI].set_addr) {
+ struct scmi_fc_info *fci = &pc->fc_info[POWERCAP_FC_PAI];
+
+ trace_scmi_fc_call(SCMI_PROTOCOL_POWERCAP, POWERCAP_PAI_SET,
+ domain_id, pai, 0);
+ iowrite32(pai, fci->set_addr);
+ ph->hops->fastchannel_db_ring(fci->set_db);
+ return 0;
+ }
+
+ return scmi_powercap_xfer_pai_set(ph, domain_id, pai);
+}
+
+static int scmi_powercap_measurements_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *average_power,
+ u32 *pai)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_resp_powercap_meas_get *resp;
+ const struct scmi_powercap_info *pc;
+
+ pc = scmi_powercap_dom_info_get(ph, domain_id);
+ if (!pc || !pc->powercap_monitoring || !pai || !average_power)
+ return -EINVAL;
+
+ ret = ph->xops->xfer_get_init(ph, POWERCAP_MEASUREMENTS_GET,
+ sizeof(u32), sizeof(*resp), &t);
+ if (ret)
+ return ret;
+
+ resp = t->rx.buf;
+ put_unaligned_le32(domain_id, t->tx.buf);
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret) {
+ *average_power = le32_to_cpu(resp->power);
+ *pai = le32_to_cpu(resp->pai);
+ }
+
+ ph->xops->xfer_put(ph, t);
+ return ret;
+}
+
+static int
+scmi_powercap_measurements_threshold_get(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *power_thresh_low,
+ u32 *power_thresh_high)
+{
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (!power_thresh_low || !power_thresh_high ||
+ domain_id >= pi->num_domains)
+ return -EINVAL;
+
+ *power_thresh_low = THRESH_LOW(pi, domain_id);
+ *power_thresh_high = THRESH_HIGH(pi, domain_id);
+
+ return 0;
+}
+
+static int
+scmi_powercap_measurements_threshold_set(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 power_thresh_low,
+ u32 power_thresh_high)
+{
+ int ret = 0;
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (domain_id >= pi->num_domains ||
+ power_thresh_low > power_thresh_high)
+ return -EINVAL;
+
+ /* Anything to do ? */
+ if (THRESH_LOW(pi, domain_id) == power_thresh_low &&
+ THRESH_HIGH(pi, domain_id) == power_thresh_high)
+ return ret;
+
+ pi->states[domain_id].thresholds =
+ (FIELD_PREP(GENMASK_ULL(31, 0), power_thresh_low) |
+ FIELD_PREP(GENMASK_ULL(63, 32), power_thresh_high));
+
+ /* Update thresholds if notification already enabled */
+ if (pi->states[domain_id].meas_notif_enabled)
+ ret = scmi_powercap_notify(ph, domain_id,
+ POWERCAP_MEASUREMENTS_NOTIFY,
+ true);
+
+ return ret;
+}
+
+static const struct scmi_powercap_proto_ops powercap_proto_ops = {
+ .num_domains_get = scmi_powercap_num_domains_get,
+ .info_get = scmi_powercap_dom_info_get,
+ .cap_get = scmi_powercap_cap_get,
+ .cap_set = scmi_powercap_cap_set,
+ .pai_get = scmi_powercap_pai_get,
+ .pai_set = scmi_powercap_pai_set,
+ .measurements_get = scmi_powercap_measurements_get,
+ .measurements_threshold_set = scmi_powercap_measurements_threshold_set,
+ .measurements_threshold_get = scmi_powercap_measurements_threshold_get,
+};
+
+static void scmi_powercap_domain_init_fc(const struct scmi_protocol_handle *ph,
+ u32 domain, struct scmi_fc_info **p_fc)
+{
+ struct scmi_fc_info *fc;
+
+ fc = devm_kcalloc(ph->dev, POWERCAP_FC_MAX, sizeof(*fc), GFP_KERNEL);
+ if (!fc)
+ return;
+
+ ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
+ POWERCAP_CAP_SET, 4, domain,
+ &fc[POWERCAP_FC_CAP].set_addr,
+ &fc[POWERCAP_FC_CAP].set_db);
+
+ ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
+ POWERCAP_CAP_GET, 4, domain,
+ &fc[POWERCAP_FC_CAP].get_addr, NULL);
+
+ ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
+ POWERCAP_PAI_SET, 4, domain,
+ &fc[POWERCAP_FC_PAI].set_addr,
+ &fc[POWERCAP_FC_PAI].set_db);
+
+ ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
+ POWERCAP_PAI_GET, 4, domain,
+ &fc[POWERCAP_FC_PAI].get_addr, NULL);
+
+ *p_fc = fc;
+}
+
+static int scmi_powercap_notify(const struct scmi_protocol_handle *ph,
+ u32 domain, int message_id, bool enable)
+{
+ int ret;
+ struct scmi_xfer *t;
+
+ switch (message_id) {
+ case POWERCAP_CAP_NOTIFY:
+ {
+ struct scmi_msg_powercap_notify_cap *notify;
+
+ ret = ph->xops->xfer_get_init(ph, message_id,
+ sizeof(*notify), 0, &t);
+ if (ret)
+ return ret;
+
+ notify = t->tx.buf;
+ notify->domain = cpu_to_le32(domain);
+ notify->notify_enable = cpu_to_le32(enable ? BIT(0) : 0);
+ break;
+ }
+ case POWERCAP_MEASUREMENTS_NOTIFY:
+ {
+ u32 low, high;
+ struct scmi_msg_powercap_notify_thresh *notify;
+
+ /*
+ * Note that we have to pick the most recently configured
+ * thresholds to build a proper POWERCAP_MEASUREMENTS_NOTIFY
+ * enable request and we fail, complaining, if no thresholds
+ * were ever set, since this is an indication the API has been
+ * used wrongly.
+ */
+ ret = scmi_powercap_measurements_threshold_get(ph, domain,
+ &low, &high);
+ if (ret)
+ return ret;
+
+ if (enable && !low && !high) {
+ dev_err(ph->dev,
+ "Invalid Measurements Notify thresholds: %u/%u\n",
+ low, high);
+ return -EINVAL;
+ }
+
+ ret = ph->xops->xfer_get_init(ph, message_id,
+ sizeof(*notify), 0, &t);
+ if (ret)
+ return ret;
+
+ notify = t->tx.buf;
+ notify->domain = cpu_to_le32(domain);
+ notify->notify_enable = cpu_to_le32(enable ? BIT(0) : 0);
+ notify->power_thresh_low = cpu_to_le32(low);
+ notify->power_thresh_high = cpu_to_le32(high);
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ ret = ph->xops->do_xfer(ph, t);
+
+ ph->xops->xfer_put(ph, t);
+ return ret;
+}
+
+static int
+scmi_powercap_set_notify_enabled(const struct scmi_protocol_handle *ph,
+ u8 evt_id, u32 src_id, bool enable)
+{
+ int ret, cmd_id;
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (evt_id >= ARRAY_SIZE(evt_2_cmd) || src_id >= pi->num_domains)
+ return -EINVAL;
+
+ cmd_id = evt_2_cmd[evt_id];
+ ret = scmi_powercap_notify(ph, src_id, cmd_id, enable);
+ if (ret)
+ pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+ evt_id, src_id, ret);
+ else if (cmd_id == POWERCAP_MEASUREMENTS_NOTIFY)
+ /*
+ * On success save the current notification enabled state, so
+ * as to be able to properly update the notification thresholds
+ * when they are modified on a domain for which measurement
+ * notifications were currently enabled.
+ *
+ * This is needed because the SCMI Notification core machinery
+ * and API does not support passing per-notification custom
+ * arguments at callback registration time.
+ *
+ * Note that this can be done here with a simple flag since the
+ * SCMI core Notifications code takes care of keeping proper
+ * per-domain enables refcounting, so that this helper function
+ * will be called only once (for enables) when the first user
+ * registers a callback on this domain and once more (disable)
+ * when the last user de-registers its callback.
+ */
+ pi->states[src_id].meas_notif_enabled = enable;
+
+ return ret;
+}
+
+static void *
+scmi_powercap_fill_custom_report(const struct scmi_protocol_handle *ph,
+ u8 evt_id, ktime_t timestamp,
+ const void *payld, size_t payld_sz,
+ void *report, u32 *src_id)
+{
+ void *rep = NULL;
+
+ switch (evt_id) {
+ case SCMI_EVENT_POWERCAP_CAP_CHANGED:
+ {
+ const struct scmi_powercap_cap_changed_notify_payld *p = payld;
+ struct scmi_powercap_cap_changed_report *r = report;
+
+ if (sizeof(*p) != payld_sz)
+ break;
+
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ r->domain_id = le32_to_cpu(p->domain_id);
+ r->power_cap = le32_to_cpu(p->power_cap);
+ r->pai = le32_to_cpu(p->pai);
+ *src_id = r->domain_id;
+ rep = r;
+ break;
+ }
+ case SCMI_EVENT_POWERCAP_MEASUREMENTS_CHANGED:
+ {
+ const struct scmi_powercap_meas_changed_notify_payld *p = payld;
+ struct scmi_powercap_meas_changed_report *r = report;
+
+ if (sizeof(*p) != payld_sz)
+ break;
+
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ r->domain_id = le32_to_cpu(p->domain_id);
+ r->power = le32_to_cpu(p->power);
+ *src_id = r->domain_id;
+ rep = r;
+ break;
+ }
+ default:
+ break;
+ }
+
+ return rep;
+}
+
+static int
+scmi_powercap_get_num_sources(const struct scmi_protocol_handle *ph)
+{
+ struct powercap_info *pi = ph->get_priv(ph);
+
+ if (!pi)
+ return -EINVAL;
+
+ return pi->num_domains;
+}
+
+static const struct scmi_event powercap_events[] = {
+ {
+ .id = SCMI_EVENT_POWERCAP_CAP_CHANGED,
+ .max_payld_sz =
+ sizeof(struct scmi_powercap_cap_changed_notify_payld),
+ .max_report_sz =
+ sizeof(struct scmi_powercap_cap_changed_report),
+ },
+ {
+ .id = SCMI_EVENT_POWERCAP_MEASUREMENTS_CHANGED,
+ .max_payld_sz =
+ sizeof(struct scmi_powercap_meas_changed_notify_payld),
+ .max_report_sz =
+ sizeof(struct scmi_powercap_meas_changed_report),
+ },
+};
+
+static const struct scmi_event_ops powercap_event_ops = {
+ .get_num_sources = scmi_powercap_get_num_sources,
+ .set_notify_enabled = scmi_powercap_set_notify_enabled,
+ .fill_custom_report = scmi_powercap_fill_custom_report,
+};
+
+static const struct scmi_protocol_events powercap_protocol_events = {
+ .queue_sz = SCMI_PROTO_QUEUE_SZ,
+ .ops = &powercap_event_ops,
+ .evts = powercap_events,
+ .num_events = ARRAY_SIZE(powercap_events),
+};
+
+static int
+scmi_powercap_protocol_init(const struct scmi_protocol_handle *ph)
+{
+ int domain, ret;
+ u32 version;
+ struct powercap_info *pinfo;
+
+ ret = ph->xops->version_get(ph, &version);
+ if (ret)
+ return ret;
+
+ dev_dbg(ph->dev, "Powercap Version %d.%d\n",
+ PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+ pinfo = devm_kzalloc(ph->dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ ret = scmi_powercap_attributes_get(ph, pinfo);
+ if (ret)
+ return ret;
+
+ pinfo->powercaps = devm_kcalloc(ph->dev, pinfo->num_domains,
+ sizeof(*pinfo->powercaps),
+ GFP_KERNEL);
+ if (!pinfo->powercaps)
+ return -ENOMEM;
+
+ /*
+ * Note that any failure in retrieving any domain attribute leads to
+ * the whole Powercap protocol initialization failure: this way the
+ * reported Powercap domains are all assured, when accessed, to be well
+ * formed and correlated by sane parent-child relationship (if any).
+ */
+ for (domain = 0; domain < pinfo->num_domains; domain++) {
+ ret = scmi_powercap_domain_attributes_get(ph, pinfo, domain);
+ if (ret)
+ return ret;
+
+ if (pinfo->powercaps[domain].fastchannels)
+ scmi_powercap_domain_init_fc(ph, domain,
+ &pinfo->powercaps[domain].fc_info);
+ }
+
+ pinfo->states = devm_kcalloc(ph->dev, pinfo->num_domains,
+ sizeof(*pinfo->states), GFP_KERNEL);
+ if (!pinfo->states)
+ return -ENOMEM;
+
+ pinfo->version = version;
+
+ return ph->set_priv(ph, pinfo);
+}
+
+static const struct scmi_protocol scmi_powercap = {
+ .id = SCMI_PROTOCOL_POWERCAP,
+ .owner = THIS_MODULE,
+ .instance_init = &scmi_powercap_protocol_init,
+ .ops = &powercap_proto_ops,
+ .events = &powercap_protocol_events,
+};
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(powercap, scmi_powercap)
struct scmi_iterator_state *st, void *priv);
};
+struct scmi_fc_db_info {
+ int width;
+ u64 set;
+ u64 mask;
+ void __iomem *addr;
+};
+
+struct scmi_fc_info {
+ void __iomem *set_addr;
+ void __iomem *get_addr;
+ struct scmi_fc_db_info *set_db;
+};
+
/**
* struct scmi_proto_helpers_ops - References to common protocol helpers
* @extended_name_get: A common helper function to retrieve extended naming
* provided in @ops.
* @iter_response_run: A common helper to trigger the run of a previously
* initialized iterator.
+ * @fastchannel_init: A common helper used to initialize FC descriptors by
+ * gathering FC descriptions from the SCMI platform server.
+ * @fastchannel_db_ring: A common helper to ring a FC doorbell.
*/
struct scmi_proto_helpers_ops {
int (*extended_name_get)(const struct scmi_protocol_handle *ph,
unsigned int max_resources, u8 msg_id,
size_t tx_size, void *priv);
int (*iter_response_run)(void *iter);
+ void (*fastchannel_init)(const struct scmi_protocol_handle *ph,
+ u8 describe_id, u32 message_id,
+ u32 valid_size, u32 domain,
+ void __iomem **p_addr,
+ struct scmi_fc_db_info **p_db);
+ void (*fastchannel_db_ring)(struct scmi_fc_db_info *db);
};
/**
DECLARE_SCMI_REGISTER_UNREGISTER(sensors);
DECLARE_SCMI_REGISTER_UNREGISTER(voltage);
DECLARE_SCMI_REGISTER_UNREGISTER(system);
+DECLARE_SCMI_REGISTER_UNREGISTER(powercap);
#endif /* _SCMI_PROTOCOLS_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SCMI Generic SystemPower Control driver.
+ *
+ * Copyright (C) 2020-2022 ARM Ltd.
+ */
+/*
+ * In order to handle platform originated SCMI SystemPower requests (like
+ * shutdowns or cold/warm resets) we register an SCMI Notification notifier
+ * block to react when such SCMI SystemPower events are emitted by platform.
+ *
+ * Once such a notification is received we act accordingly to perform the
+ * required system transition depending on the kind of request.
+ *
+ * Graceful requests are routed to userspace through the same API methods
+ * (orderly_poweroff/reboot()) used by ACPI when handling ACPI Shutdown bus
+ * events.
+ *
+ * Direct forceful requests are not supported since are not meant to be sent
+ * by the SCMI platform to an OSPM like Linux.
+ *
+ * Additionally, graceful request notifications can carry an optional timeout
+ * field stating the maximum amount of time allowed by the platform for
+ * completion after which they are converted to forceful ones: the assumption
+ * here is that even graceful requests can be upper-bound by a maximum final
+ * timeout strictly enforced by the platform itself which can ultimately cut
+ * the power off at will anytime; in order to avoid such extreme scenario, we
+ * track progress of graceful requests through the means of a reboot notifier
+ * converting timed-out graceful requests to forceful ones, so at least we
+ * try to perform a clean sync and shutdown/restart before the power is cut.
+ *
+ * Given the peculiar nature of SCMI SystemPower protocol, that is being in
+ * charge of triggering system wide shutdown/reboot events, there should be
+ * only one SCMI platform actively emitting SystemPower events.
+ * For this reason the SCMI core takes care to enforce the creation of one
+ * single unique device associated to the SCMI System Power protocol; no matter
+ * how many SCMI platforms are defined on the system, only one can be designated
+ * to support System Power: as a consequence this driver will never be probed
+ * more than once.
+ *
+ * For similar reasons as soon as the first valid SystemPower is received by
+ * this driver and the shutdown/reboot is started, any further notification
+ * possibly emitted by the platform will be ignored.
+ */
+
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/scmi_protocol.h>
+#include <linux/slab.h>
+#include <linux/time64.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#ifndef MODULE
+#include <linux/fs.h>
+#endif
+
+enum scmi_syspower_state {
+ SCMI_SYSPOWER_IDLE,
+ SCMI_SYSPOWER_IN_PROGRESS,
+ SCMI_SYSPOWER_REBOOTING
+};
+
+/**
+ * struct scmi_syspower_conf - Common configuration
+ *
+ * @dev: A reference device
+ * @state: Current SystemPower state
+ * @state_mtx: @state related mutex
+ * @required_transition: The requested transition as decribed in the received
+ * SCMI SystemPower notification
+ * @userspace_nb: The notifier_block registered against the SCMI SystemPower
+ * notification to start the needed userspace interactions.
+ * @reboot_nb: A notifier_block optionally used to track reboot progress
+ * @forceful_work: A worker used to trigger a forceful transition once a
+ * graceful has timed out.
+ */
+struct scmi_syspower_conf {
+ struct device *dev;
+ enum scmi_syspower_state state;
+ /* Protect access to state */
+ struct mutex state_mtx;
+ enum scmi_system_events required_transition;
+
+ struct notifier_block userspace_nb;
+ struct notifier_block reboot_nb;
+
+ struct delayed_work forceful_work;
+};
+
+#define userspace_nb_to_sconf(x) \
+ container_of(x, struct scmi_syspower_conf, userspace_nb)
+
+#define reboot_nb_to_sconf(x) \
+ container_of(x, struct scmi_syspower_conf, reboot_nb)
+
+#define dwork_to_sconf(x) \
+ container_of(x, struct scmi_syspower_conf, forceful_work)
+
+/**
+ * scmi_reboot_notifier - A reboot notifier to catch an ongoing successful
+ * system transition
+ * @nb: Reference to the related notifier block
+ * @reason: The reason for the ongoing reboot
+ * @__unused: The cmd being executed on a restart request (unused)
+ *
+ * When an ongoing system transition is detected, compatible with the one
+ * requested by SCMI, cancel the delayed work.
+ *
+ * Return: NOTIFY_OK in any case
+ */
+static int scmi_reboot_notifier(struct notifier_block *nb,
+ unsigned long reason, void *__unused)
+{
+ struct scmi_syspower_conf *sc = reboot_nb_to_sconf(nb);
+
+ mutex_lock(&sc->state_mtx);
+ switch (reason) {
+ case SYS_HALT:
+ case SYS_POWER_OFF:
+ if (sc->required_transition == SCMI_SYSTEM_SHUTDOWN)
+ sc->state = SCMI_SYSPOWER_REBOOTING;
+ break;
+ case SYS_RESTART:
+ if (sc->required_transition == SCMI_SYSTEM_COLDRESET ||
+ sc->required_transition == SCMI_SYSTEM_WARMRESET)
+ sc->state = SCMI_SYSPOWER_REBOOTING;
+ break;
+ default:
+ break;
+ }
+
+ if (sc->state == SCMI_SYSPOWER_REBOOTING) {
+ dev_dbg(sc->dev, "Reboot in progress...cancel delayed work.\n");
+ cancel_delayed_work_sync(&sc->forceful_work);
+ }
+ mutex_unlock(&sc->state_mtx);
+
+ return NOTIFY_OK;
+}
+
+/**
+ * scmi_request_forceful_transition - Request forceful SystemPower transition
+ * @sc: A reference to the configuration data
+ *
+ * Initiates the required SystemPower transition without involving userspace:
+ * just trigger the action at the kernel level after issuing an emergency
+ * sync. (if possible at all)
+ */
+static inline void
+scmi_request_forceful_transition(struct scmi_syspower_conf *sc)
+{
+ dev_dbg(sc->dev, "Serving forceful request:%d\n",
+ sc->required_transition);
+
+#ifndef MODULE
+ emergency_sync();
+#endif
+ switch (sc->required_transition) {
+ case SCMI_SYSTEM_SHUTDOWN:
+ kernel_power_off();
+ break;
+ case SCMI_SYSTEM_COLDRESET:
+ case SCMI_SYSTEM_WARMRESET:
+ kernel_restart(NULL);
+ break;
+ default:
+ break;
+ }
+}
+
+static void scmi_forceful_work_func(struct work_struct *work)
+{
+ struct scmi_syspower_conf *sc;
+ struct delayed_work *dwork;
+
+ if (system_state > SYSTEM_RUNNING)
+ return;
+
+ dwork = to_delayed_work(work);
+ sc = dwork_to_sconf(dwork);
+
+ dev_dbg(sc->dev, "Graceful request timed out...forcing !\n");
+ mutex_lock(&sc->state_mtx);
+ /* avoid deadlock by unregistering reboot notifier first */
+ unregister_reboot_notifier(&sc->reboot_nb);
+ if (sc->state == SCMI_SYSPOWER_IN_PROGRESS)
+ scmi_request_forceful_transition(sc);
+ mutex_unlock(&sc->state_mtx);
+}
+
+/**
+ * scmi_request_graceful_transition - Request graceful SystemPower transition
+ * @sc: A reference to the configuration data
+ * @timeout_ms: The desired timeout to wait for the shutdown to complete before
+ * system is forcibly shutdown.
+ *
+ * Initiates the required SystemPower transition, requesting userspace
+ * co-operation: it uses the same orderly_ methods used by ACPI Shutdown event
+ * processing.
+ *
+ * Takes care also to register a reboot notifier and to schedule a delayed work
+ * in order to detect if userspace actions are taking too long and in such a
+ * case to trigger a forceful transition.
+ */
+static void scmi_request_graceful_transition(struct scmi_syspower_conf *sc,
+ unsigned int timeout_ms)
+{
+ unsigned int adj_timeout_ms = 0;
+
+ if (timeout_ms) {
+ int ret;
+
+ sc->reboot_nb.notifier_call = &scmi_reboot_notifier;
+ ret = register_reboot_notifier(&sc->reboot_nb);
+ if (!ret) {
+ /* Wait only up to 75% of the advertised timeout */
+ adj_timeout_ms = mult_frac(timeout_ms, 3, 4);
+ INIT_DELAYED_WORK(&sc->forceful_work,
+ scmi_forceful_work_func);
+ schedule_delayed_work(&sc->forceful_work,
+ msecs_to_jiffies(adj_timeout_ms));
+ } else {
+ /* Carry on best effort even without a reboot notifier */
+ dev_warn(sc->dev,
+ "Cannot register reboot notifier !\n");
+ }
+ }
+
+ dev_dbg(sc->dev,
+ "Serving graceful req:%d (timeout_ms:%u adj_timeout_ms:%u)\n",
+ sc->required_transition, timeout_ms, adj_timeout_ms);
+
+ switch (sc->required_transition) {
+ case SCMI_SYSTEM_SHUTDOWN:
+ /*
+ * When triggered early at boot-time the 'orderly' call will
+ * partially fail due to the lack of userspace itself, but
+ * the force=true argument will start anyway a successful
+ * forced shutdown.
+ */
+ orderly_poweroff(true);
+ break;
+ case SCMI_SYSTEM_COLDRESET:
+ case SCMI_SYSTEM_WARMRESET:
+ orderly_reboot();
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * scmi_userspace_notifier - Notifier callback to act on SystemPower
+ * Notifications
+ * @nb: Reference to the related notifier block
+ * @event: The SystemPower notification event id
+ * @data: The SystemPower event report
+ *
+ * This callback is in charge of decoding the received SystemPower report
+ * and act accordingly triggering a graceful or forceful system transition.
+ *
+ * Note that once a valid SCMI SystemPower event starts being served, any
+ * other following SystemPower notification received from the same SCMI
+ * instance (handle) will be ignored.
+ *
+ * Return: NOTIFY_OK once a valid SystemPower event has been successfully
+ * processed.
+ */
+static int scmi_userspace_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct scmi_system_power_state_notifier_report *er = data;
+ struct scmi_syspower_conf *sc = userspace_nb_to_sconf(nb);
+
+ if (er->system_state >= SCMI_SYSTEM_POWERUP) {
+ dev_err(sc->dev, "Ignoring unsupported system_state: 0x%X\n",
+ er->system_state);
+ return NOTIFY_DONE;
+ }
+
+ if (!SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(er->flags)) {
+ dev_err(sc->dev, "Ignoring forceful notification.\n");
+ return NOTIFY_DONE;
+ }
+
+ /*
+ * Bail out if system is already shutting down or an SCMI SystemPower
+ * requested is already being served.
+ */
+ if (system_state > SYSTEM_RUNNING)
+ return NOTIFY_DONE;
+ mutex_lock(&sc->state_mtx);
+ if (sc->state != SCMI_SYSPOWER_IDLE) {
+ dev_dbg(sc->dev,
+ "Transition already in progress...ignore.\n");
+ mutex_unlock(&sc->state_mtx);
+ return NOTIFY_DONE;
+ }
+ sc->state = SCMI_SYSPOWER_IN_PROGRESS;
+ mutex_unlock(&sc->state_mtx);
+
+ sc->required_transition = er->system_state;
+
+ /* Leaving a trace in logs of who triggered the shutdown/reboot. */
+ dev_info(sc->dev, "Serving shutdown/reboot request: %d\n",
+ sc->required_transition);
+
+ scmi_request_graceful_transition(sc, er->timeout);
+
+ return NOTIFY_OK;
+}
+
+static int scmi_syspower_probe(struct scmi_device *sdev)
+{
+ int ret;
+ struct scmi_syspower_conf *sc;
+ struct scmi_handle *handle = sdev->handle;
+
+ if (!handle)
+ return -ENODEV;
+
+ ret = handle->devm_protocol_acquire(sdev, SCMI_PROTOCOL_SYSTEM);
+ if (ret)
+ return ret;
+
+ sc = devm_kzalloc(&sdev->dev, sizeof(*sc), GFP_KERNEL);
+ if (!sc)
+ return -ENOMEM;
+
+ sc->state = SCMI_SYSPOWER_IDLE;
+ mutex_init(&sc->state_mtx);
+ sc->required_transition = SCMI_SYSTEM_MAX;
+ sc->userspace_nb.notifier_call = &scmi_userspace_notifier;
+ sc->dev = &sdev->dev;
+
+ return handle->notify_ops->devm_event_notifier_register(sdev,
+ SCMI_PROTOCOL_SYSTEM,
+ SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER,
+ NULL, &sc->userspace_nb);
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+ { SCMI_PROTOCOL_SYSTEM, "syspower" },
+ { },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_system_power_driver = {
+ .name = "scmi-system-power",
+ .probe = scmi_syspower_probe,
+ .id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_system_power_driver);
+
+MODULE_AUTHOR("Cristian Marussi <cristian.marussi@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI SystemPower Control driver");
+MODULE_LICENSE("GPL");
__le32 agent_id;
__le32 flags;
__le32 system_state;
+ __le32 timeout;
};
struct scmi_system_info {
u32 version;
+ bool graceful_timeout_supported;
};
static int scmi_system_request_notify(const struct scmi_protocol_handle *ph,
const void *payld, size_t payld_sz,
void *report, u32 *src_id)
{
+ size_t expected_sz;
const struct scmi_system_power_state_notifier_payld *p = payld;
struct scmi_system_power_state_notifier_report *r = report;
+ struct scmi_system_info *pinfo = ph->get_priv(ph);
+ expected_sz = pinfo->graceful_timeout_supported ?
+ sizeof(*p) : sizeof(*p) - sizeof(__le32);
if (evt_id != SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER ||
- sizeof(*p) != payld_sz)
+ payld_sz != expected_sz)
return NULL;
r->timestamp = timestamp;
r->agent_id = le32_to_cpu(p->agent_id);
r->flags = le32_to_cpu(p->flags);
r->system_state = le32_to_cpu(p->system_state);
+ if (pinfo->graceful_timeout_supported &&
+ r->system_state == SCMI_SYSTEM_SHUTDOWN &&
+ SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(r->flags))
+ r->timeout = le32_to_cpu(p->timeout);
+ else
+ r->timeout = 0x00;
*src_id = 0;
return r;
return -ENOMEM;
pinfo->version = version;
+ if (PROTOCOL_REV_MAJOR(pinfo->version) >= 0x2)
+ pinfo->graceful_timeout_supported = true;
+
return ph->set_priv(ph, pinfo);
}
info->firmware_version = le32_to_cpu(caps.platform_version);
}
/* Ignore error if not implemented */
- if (scpi_info->is_legacy && ret == -EOPNOTSUPP)
+ if (info->is_legacy && ret == -EOPNOTSUPP)
return 0;
return ret;
struct resource res;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ struct scpi_drvinfo *scpi_drvinfo;
- scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL);
- if (!scpi_info)
+ scpi_drvinfo = devm_kzalloc(dev, sizeof(*scpi_drvinfo), GFP_KERNEL);
+ if (!scpi_drvinfo)
return -ENOMEM;
if (of_match_device(legacy_scpi_of_match, &pdev->dev))
- scpi_info->is_legacy = true;
+ scpi_drvinfo->is_legacy = true;
count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
if (count < 0) {
return -ENODEV;
}
- scpi_info->channels = devm_kcalloc(dev, count, sizeof(struct scpi_chan),
- GFP_KERNEL);
- if (!scpi_info->channels)
+ scpi_drvinfo->channels =
+ devm_kcalloc(dev, count, sizeof(struct scpi_chan), GFP_KERNEL);
+ if (!scpi_drvinfo->channels)
return -ENOMEM;
- ret = devm_add_action(dev, scpi_free_channels, scpi_info);
+ ret = devm_add_action(dev, scpi_free_channels, scpi_drvinfo);
if (ret)
return ret;
- for (; scpi_info->num_chans < count; scpi_info->num_chans++) {
+ for (; scpi_drvinfo->num_chans < count; scpi_drvinfo->num_chans++) {
resource_size_t size;
- int idx = scpi_info->num_chans;
- struct scpi_chan *pchan = scpi_info->channels + idx;
+ int idx = scpi_drvinfo->num_chans;
+ struct scpi_chan *pchan = scpi_drvinfo->channels + idx;
struct mbox_client *cl = &pchan->cl;
struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
return ret;
}
- scpi_info->commands = scpi_std_commands;
+ scpi_drvinfo->commands = scpi_std_commands;
- platform_set_drvdata(pdev, scpi_info);
+ platform_set_drvdata(pdev, scpi_drvinfo);
- if (scpi_info->is_legacy) {
+ if (scpi_drvinfo->is_legacy) {
/* Replace with legacy variants */
scpi_ops.clk_set_val = legacy_scpi_clk_set_val;
- scpi_info->commands = scpi_legacy_commands;
+ scpi_drvinfo->commands = scpi_legacy_commands;
/* Fill priority bitmap */
for (idx = 0; idx < ARRAY_SIZE(legacy_hpriority_cmds); idx++)
set_bit(legacy_hpriority_cmds[idx],
- scpi_info->cmd_priority);
+ scpi_drvinfo->cmd_priority);
}
- ret = scpi_init_versions(scpi_info);
+ scpi_info = scpi_drvinfo;
+
+ ret = scpi_init_versions(scpi_drvinfo);
if (ret) {
dev_err(dev, "incorrect or no SCP firmware found\n");
+ scpi_info = NULL;
return ret;
}
- if (scpi_info->is_legacy && !scpi_info->protocol_version &&
- !scpi_info->firmware_version)
+ if (scpi_drvinfo->is_legacy && !scpi_drvinfo->protocol_version &&
+ !scpi_drvinfo->firmware_version)
dev_info(dev, "SCP Protocol legacy pre-1.0 firmware\n");
else
dev_info(dev, "SCP Protocol %lu.%lu Firmware %lu.%lu.%lu version\n",
FIELD_GET(PROTO_REV_MAJOR_MASK,
- scpi_info->protocol_version),
+ scpi_drvinfo->protocol_version),
FIELD_GET(PROTO_REV_MINOR_MASK,
- scpi_info->protocol_version),
+ scpi_drvinfo->protocol_version),
FIELD_GET(FW_REV_MAJOR_MASK,
- scpi_info->firmware_version),
+ scpi_drvinfo->firmware_version),
FIELD_GET(FW_REV_MINOR_MASK,
- scpi_info->firmware_version),
+ scpi_drvinfo->firmware_version),
FIELD_GET(FW_REV_PATCH_MASK,
- scpi_info->firmware_version));
- scpi_info->scpi_ops = &scpi_ops;
+ scpi_drvinfo->firmware_version));
+
+ scpi_drvinfo->scpi_ops = &scpi_ops;
- return devm_of_platform_populate(dev);
+ ret = devm_of_platform_populate(dev);
+ if (ret)
+ scpi_info = NULL;
+
+ return ret;
}
static const struct of_device_id scpi_of_match[] = {
/**
* scm_legacy_call() - Sends a command to the SCM and waits for the command to
* finish processing.
+ * @dev: device
+ * @desc: descriptor structure containing arguments and return values
+ * @res: results from SMC call
*
* A note on cache maintenance:
* Note that any buffers that are expected to be accessed by the secure world
/**
* scm_legacy_call_atomic() - Send an atomic SCM command with up to 5 arguments
* and 3 return values
+ * @unused: device, legacy argument, not used, can be NULL
* @desc: SCM call descriptor containing arguments
* @res: SCM call return values
*
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
+#include <linux/interconnect.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
struct clk *core_clk;
struct clk *iface_clk;
struct clk *bus_clk;
+ struct icc_path *path;
struct reset_controller_dev reset;
+ /* control access to the interconnect path */
+ struct mutex scm_bw_lock;
+ int scm_vote_count;
+
u64 dload_mode_addr;
};
clk_disable_unprepare(__scm->bus_clk);
}
+static int qcom_scm_bw_enable(void)
+{
+ int ret = 0;
+
+ if (!__scm->path)
+ return 0;
+
+ if (IS_ERR(__scm->path))
+ return -EINVAL;
+
+ mutex_lock(&__scm->scm_bw_lock);
+ if (!__scm->scm_vote_count) {
+ ret = icc_set_bw(__scm->path, 0, UINT_MAX);
+ if (ret < 0) {
+ dev_err(__scm->dev, "failed to set bandwidth request\n");
+ goto err_bw;
+ }
+ }
+ __scm->scm_vote_count++;
+err_bw:
+ mutex_unlock(&__scm->scm_bw_lock);
+
+ return ret;
+}
+
+static void qcom_scm_bw_disable(void)
+{
+ if (IS_ERR_OR_NULL(__scm->path))
+ return;
+
+ mutex_lock(&__scm->scm_bw_lock);
+ if (__scm->scm_vote_count-- == 1)
+ icc_set_bw(__scm->path, 0, 0);
+ mutex_unlock(&__scm->scm_bw_lock);
+}
+
enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN;
static DEFINE_SPINLOCK(scm_query_lock);
if (ret)
goto out;
+ ret = qcom_scm_bw_enable();
+ if (ret)
+ return ret;
+
desc.args[1] = mdata_phys;
ret = qcom_scm_call(__scm->dev, &desc, &res);
+ qcom_scm_bw_disable();
qcom_scm_clk_disable();
out:
if (ret)
return ret;
+ ret = qcom_scm_bw_enable();
+ if (ret)
+ return ret;
+
ret = qcom_scm_call(__scm->dev, &desc, &res);
+ qcom_scm_bw_disable();
qcom_scm_clk_disable();
return ret ? : res.result[0];
if (ret)
return ret;
+ ret = qcom_scm_bw_enable();
+ if (ret)
+ return ret;
+
ret = qcom_scm_call(__scm->dev, &desc, &res);
+ qcom_scm_bw_disable();
qcom_scm_clk_disable();
return ret ? : res.result[0];
if (ret)
return ret;
+ ret = qcom_scm_bw_enable();
+ if (ret)
+ return ret;
+
ret = qcom_scm_call(__scm->dev, &desc, &res);
+ qcom_scm_bw_disable();
qcom_scm_clk_disable();
return ret ? : res.result[0];
if (ret < 0)
return ret;
+ mutex_init(&scm->scm_bw_lock);
+
clks = (unsigned long)of_device_get_match_data(&pdev->dev);
+ scm->path = devm_of_icc_get(&pdev->dev, NULL);
+ if (IS_ERR(scm->path))
+ return dev_err_probe(&pdev->dev, PTR_ERR(scm->path),
+ "failed to acquire interconnect path\n");
+
scm->core_clk = devm_clk_get(&pdev->dev, "core");
if (IS_ERR(scm->core_clk)) {
if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
/*
* If requested enable "download mode", from this point on warmboot
- * will cause the the boot stages to enter download mode, unless
+ * will cause the boot stages to enter download mode, unless
* disabled below by a clean shutdown/reboot.
*/
if (download_mode)
mode |= attrs & DEBUGFS_S_IWUSR ? 0200 : 0;
dentry = debugfs_create_file(name, mode, parent, bpmp,
&bpmp_debug_fops);
- if (!dentry) {
+ if (IS_ERR(dentry)) {
err = -ENOMEM;
goto out;
}
if (t & DEBUGFS_S_ISDIR) {
dentry = debugfs_create_dir(name, parent);
- if (!dentry)
+ if (IS_ERR(dentry))
return -ENOMEM;
err = bpmp_populate_dir(bpmp, seqbuf, dentry, depth+1);
if (err < 0)
dentry = debugfs_create_file(name, mode,
parent, bpmp,
&debugfs_fops);
- if (!dentry)
+ if (IS_ERR(dentry))
return -ENOMEM;
}
}
return 0;
root = debugfs_create_dir("bpmp", NULL);
- if (!root)
+ if (IS_ERR(root))
return -ENOMEM;
bpmp->debugfs_mirror = debugfs_create_dir("debug", root);
- if (!bpmp->debugfs_mirror) {
+ if (IS_ERR(bpmp->debugfs_mirror)) {
err = -ENOMEM;
goto out;
}
int err;
if (data && size > 0)
- memcpy(data, channel->ib->data, size);
+ memcpy_fromio(data, channel->ib->data, size);
err = tegra_bpmp_ack_response(channel);
if (err < 0)
channel->ob->flags = flags;
if (data && size > 0)
- memcpy(channel->ob->data, data, size);
+ memcpy_toio(channel->ob->data, data, size);
return tegra_bpmp_post_request(channel);
}
channel->ob->code = code;
if (data && size > 0)
- memcpy(channel->ob->data, data, size);
+ memcpy_toio(channel->ob->data, data, size);
err = tegra_bpmp_post_response(channel);
if (WARN_ON(err < 0))
/*
* Xilinx Zynq MPSoC Firmware layer
*
- * Copyright (C) 2014-2021 Xilinx, Inc.
+ * Copyright (C) 2014-2022 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Davorin Mista <davorin.mista@aggios.com>
static u32 pm_api_version;
static u32 pm_tz_version;
+int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
+{
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, sgi_num, reset, 0, 0,
+ NULL);
+ if (!ret)
+ return ret;
+
+ /* try old implementation as fallback strategy if above fails */
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
+ reset, NULL);
+}
+
/**
* zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
* @version: Returned version value
* so we need to provide the fwspec. Essentially gpiochip_populate_parent_fwspec_twocell
* that puts GIC_SPI into the first cell.
*/
-static void *msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = gc->irq.parent_domain->fwnode;
fwspec->param_count = 3;
fwspec->param[1] = parent_hwirq;
fwspec->param[2] = parent_type;
- return fwspec;
+ return 0;
}
static int msc313e_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
return 0;
}
-static void *tegra_gpio_populate_parent_fwspec(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int tegra_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = chip->irq.parent_domain->fwnode;
fwspec->param_count = 3;
fwspec->param[1] = parent_hwirq;
fwspec->param[2] = parent_type;
- return fwspec;
+ return 0;
}
#ifdef CONFIG_PM_SLEEP
return 0;
}
-static void *tegra186_gpio_populate_parent_fwspec(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int tegra186_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
struct tegra_gpio *gpio = gpiochip_get_data(chip);
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = chip->irq.parent_domain->fwnode;
fwspec->param_count = 3;
fwspec->param[1] = parent_hwirq;
fwspec->param[2] = parent_type;
- return fwspec;
+ return 0;
}
static int tegra186_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <asm-generic/msi.h>
-
#define GPIO_RX_DAT 0x0
#define GPIO_TX_SET 0x8
return 0;
}
-static void *thunderx_gpio_populate_parent_alloc_info(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int thunderx_gpio_populate_parent_alloc_info(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- msi_alloc_info_t *info;
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return NULL;
+ msi_alloc_info_t *info = &gfwspec->msiinfo;
info->hwirq = parent_hwirq;
- return info;
+ return 0;
}
static int thunderx_gpio_probe(struct pci_dev *pdev,
return -EINVAL;
}
-static void *visconti_gpio_populate_parent_fwspec(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int visconti_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = chip->irq.parent_domain->fwnode;
fwspec->param_count = 3;
fwspec->param[1] = parent_hwirq;
fwspec->param[2] = parent_type;
- return fwspec;
+ return 0;
}
static int visconti_gpio_probe(struct platform_device *pdev)
irq_hw_number_t hwirq;
unsigned int type = IRQ_TYPE_NONE;
struct irq_fwspec *fwspec = data;
- void *parent_arg;
+ union gpio_irq_fwspec gpio_parent_fwspec = {};
unsigned int parent_hwirq;
unsigned int parent_type;
struct gpio_irq_chip *girq = &gc->irq;
irq_set_probe(irq);
/* This parent only handles asserted level IRQs */
- parent_arg = girq->populate_parent_alloc_arg(gc, parent_hwirq, parent_type);
- if (!parent_arg)
- return -ENOMEM;
+ ret = girq->populate_parent_alloc_arg(gc, &gpio_parent_fwspec,
+ parent_hwirq, parent_type);
+ if (ret)
+ return ret;
chip_dbg(gc, "alloc_irqs_parent for %d parent hwirq %d\n",
irq, parent_hwirq);
irq_set_lockdep_class(irq, gc->irq.lock_key, gc->irq.request_key);
- ret = irq_domain_alloc_irqs_parent(d, irq, 1, parent_arg);
+ ret = irq_domain_alloc_irqs_parent(d, irq, 1, &gpio_parent_fwspec);
/*
* If the parent irqdomain is msi, the interrupts have already
* been allocated, so the EEXIST is good.
"failed to allocate parent hwirq %d for hwirq %lu\n",
parent_hwirq, hwirq);
- kfree(parent_arg);
return ret;
}
ops->activate = gpiochip_irq_domain_activate;
ops->deactivate = gpiochip_irq_domain_deactivate;
ops->alloc = gpiochip_hierarchy_irq_domain_alloc;
- ops->free = irq_domain_free_irqs_common;
/*
- * We only allow overriding the translate() function for
+ * We only allow overriding the translate() and free() functions for
* hierarchical chips, and this should only be done if the user
- * really need something other than 1:1 translation.
+ * really need something other than 1:1 translation for translate()
+ * callback and free if user wants to free up any resources which
+ * were allocated during callbacks, for example populate_parent_alloc_arg.
*/
if (!ops->translate)
ops->translate = gpiochip_hierarchy_irq_domain_translate;
+ if (!ops->free)
+ ops->free = irq_domain_free_irqs_common;
}
static int gpiochip_hierarchy_add_domain(struct gpio_chip *gc)
return !!gc->irq.parent_domain;
}
-void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+int gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = gc->irq.parent_domain->fwnode;
fwspec->param_count = 2;
fwspec->param[0] = parent_hwirq;
fwspec->param[1] = parent_type;
- return fwspec;
+ return 0;
}
EXPORT_SYMBOL_GPL(gpiochip_populate_parent_fwspec_twocell);
-void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+int gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
- struct irq_fwspec *fwspec;
-
- fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = gc->irq.parent_domain->fwnode;
fwspec->param_count = 4;
fwspec->param[2] = 0;
fwspec->param[3] = parent_type;
- return fwspec;
+ return 0;
}
EXPORT_SYMBOL_GPL(gpiochip_populate_parent_fwspec_fourcell);
bool "AMD DC - Enable new display engine"
default y
select SND_HDA_COMPONENT if SND_HDA_CORE
- select DRM_AMD_DC_DCN if X86 && !(KCOV_INSTRUMENT_ALL && KCOV_ENABLE_COMPARISONS)
+ select DRM_AMD_DC_DCN if (X86 || PPC_LONG_DOUBLE_128) && !(KCOV_INSTRUMENT_ALL && KCOV_ENABLE_COMPARISONS)
help
Choose this option if you want to use the new display engine
support for AMDGPU. This adds required support for Vega and
int intel_engine_stop_cs(struct intel_engine_cs *engine);
void intel_engine_cancel_stop_cs(struct intel_engine_cs *engine);
+void intel_engine_wait_for_pending_mi_fw(struct intel_engine_cs *engine);
+
void intel_engine_set_hwsp_writemask(struct intel_engine_cs *engine, u32 mask);
u64 intel_engine_get_active_head(const struct intel_engine_cs *engine);
intel_uncore_write_fw(uncore, mode, _MASKED_BIT_ENABLE(STOP_RING));
/*
- * Wa_22011802037 : gen12, Prior to doing a reset, ensure CS is
+ * Wa_22011802037 : gen11, gen12, Prior to doing a reset, ensure CS is
* stopped, set ring stop bit and prefetch disable bit to halt CS
*/
- if (GRAPHICS_VER(engine->i915) == 12)
+ if (IS_GRAPHICS_VER(engine->i915, 11, 12))
intel_uncore_write_fw(uncore, RING_MODE_GEN7(engine->mmio_base),
_MASKED_BIT_ENABLE(GEN12_GFX_PREFETCH_DISABLE));
return -ENODEV;
ENGINE_TRACE(engine, "\n");
+ /*
+ * TODO: Find out why occasionally stopping the CS times out. Seen
+ * especially with gem_eio tests.
+ *
+ * Occasionally trying to stop the cs times out, but does not adversely
+ * affect functionality. The timeout is set as a config parameter that
+ * defaults to 100ms. In most cases the follow up operation is to wait
+ * for pending MI_FORCE_WAKES. The assumption is that this timeout is
+ * sufficient for any pending MI_FORCEWAKEs to complete. Once root
+ * caused, the caller must check and handle the return from this
+ * function.
+ */
if (__intel_engine_stop_cs(engine, 1000, stop_timeout(engine))) {
ENGINE_TRACE(engine,
"timed out on STOP_RING -> IDLE; HEAD:%04x, TAIL:%04x\n",
ENGINE_WRITE_FW(engine, RING_MI_MODE, _MASKED_BIT_DISABLE(STOP_RING));
}
+static u32 __cs_pending_mi_force_wakes(struct intel_engine_cs *engine)
+{
+ static const i915_reg_t _reg[I915_NUM_ENGINES] = {
+ [RCS0] = MSG_IDLE_CS,
+ [BCS0] = MSG_IDLE_BCS,
+ [VCS0] = MSG_IDLE_VCS0,
+ [VCS1] = MSG_IDLE_VCS1,
+ [VCS2] = MSG_IDLE_VCS2,
+ [VCS3] = MSG_IDLE_VCS3,
+ [VCS4] = MSG_IDLE_VCS4,
+ [VCS5] = MSG_IDLE_VCS5,
+ [VCS6] = MSG_IDLE_VCS6,
+ [VCS7] = MSG_IDLE_VCS7,
+ [VECS0] = MSG_IDLE_VECS0,
+ [VECS1] = MSG_IDLE_VECS1,
+ [VECS2] = MSG_IDLE_VECS2,
+ [VECS3] = MSG_IDLE_VECS3,
+ [CCS0] = MSG_IDLE_CS,
+ [CCS1] = MSG_IDLE_CS,
+ [CCS2] = MSG_IDLE_CS,
+ [CCS3] = MSG_IDLE_CS,
+ };
+ u32 val;
+
+ if (!_reg[engine->id].reg) {
+ drm_err(&engine->i915->drm,
+ "MSG IDLE undefined for engine id %u\n", engine->id);
+ return 0;
+ }
+
+ val = intel_uncore_read(engine->uncore, _reg[engine->id]);
+
+ /* bits[29:25] & bits[13:9] >> shift */
+ return (val & (val >> 16) & MSG_IDLE_FW_MASK) >> MSG_IDLE_FW_SHIFT;
+}
+
+static void __gpm_wait_for_fw_complete(struct intel_gt *gt, u32 fw_mask)
+{
+ int ret;
+
+ /* Ensure GPM receives fw up/down after CS is stopped */
+ udelay(1);
+
+ /* Wait for forcewake request to complete in GPM */
+ ret = __intel_wait_for_register_fw(gt->uncore,
+ GEN9_PWRGT_DOMAIN_STATUS,
+ fw_mask, fw_mask, 5000, 0, NULL);
+
+ /* Ensure CS receives fw ack from GPM */
+ udelay(1);
+
+ if (ret)
+ GT_TRACE(gt, "Failed to complete pending forcewake %d\n", ret);
+}
+
+/*
+ * Wa_22011802037:gen12: In addition to stopping the cs, we need to wait for any
+ * pending MI_FORCE_WAKEUP requests that the CS has initiated to complete. The
+ * pending status is indicated by bits[13:9] (masked by bits[29:25]) in the
+ * MSG_IDLE register. There's one MSG_IDLE register per reset domain. Since we
+ * are concerned only with the gt reset here, we use a logical OR of pending
+ * forcewakeups from all reset domains and then wait for them to complete by
+ * querying PWRGT_DOMAIN_STATUS.
+ */
+void intel_engine_wait_for_pending_mi_fw(struct intel_engine_cs *engine)
+{
+ u32 fw_pending = __cs_pending_mi_force_wakes(engine);
+
+ if (fw_pending)
+ __gpm_wait_for_fw_complete(engine->gt, fw_pending);
+}
+
static u32
read_subslice_reg(const struct intel_engine_cs *engine,
int slice, int subslice, i915_reg_t reg)
ring_set_paused(engine, 1);
intel_engine_stop_cs(engine);
+ /*
+ * Wa_22011802037:gen11/gen12: In addition to stopping the cs, we need
+ * to wait for any pending mi force wakeups
+ */
+ if (IS_GRAPHICS_VER(engine->i915, 11, 12))
+ intel_engine_wait_for_pending_mi_fw(engine);
+
engine->execlists.reset_ccid = active_ccid(engine);
}
if (IS_DG2(gt->i915))
flags |= GUC_WA_DUAL_QUEUE;
- /* Wa_22011802037: graphics version 12 */
- if (GRAPHICS_VER(gt->i915) == 12)
+ /* Wa_22011802037: graphics version 11/12 */
+ if (IS_GRAPHICS_VER(gt->i915, 11, 12))
flags |= GUC_WA_PRE_PARSER;
/* Wa_16011777198:dg2 */
lrc_update_regs(ce, engine, head);
}
-static u32 __cs_pending_mi_force_wakes(struct intel_engine_cs *engine)
-{
- static const i915_reg_t _reg[I915_NUM_ENGINES] = {
- [RCS0] = MSG_IDLE_CS,
- [BCS0] = MSG_IDLE_BCS,
- [VCS0] = MSG_IDLE_VCS0,
- [VCS1] = MSG_IDLE_VCS1,
- [VCS2] = MSG_IDLE_VCS2,
- [VCS3] = MSG_IDLE_VCS3,
- [VCS4] = MSG_IDLE_VCS4,
- [VCS5] = MSG_IDLE_VCS5,
- [VCS6] = MSG_IDLE_VCS6,
- [VCS7] = MSG_IDLE_VCS7,
- [VECS0] = MSG_IDLE_VECS0,
- [VECS1] = MSG_IDLE_VECS1,
- [VECS2] = MSG_IDLE_VECS2,
- [VECS3] = MSG_IDLE_VECS3,
- [CCS0] = MSG_IDLE_CS,
- [CCS1] = MSG_IDLE_CS,
- [CCS2] = MSG_IDLE_CS,
- [CCS3] = MSG_IDLE_CS,
- };
- u32 val;
-
- if (!_reg[engine->id].reg)
- return 0;
-
- val = intel_uncore_read(engine->uncore, _reg[engine->id]);
-
- /* bits[29:25] & bits[13:9] >> shift */
- return (val & (val >> 16) & MSG_IDLE_FW_MASK) >> MSG_IDLE_FW_SHIFT;
-}
-
-static void __gpm_wait_for_fw_complete(struct intel_gt *gt, u32 fw_mask)
-{
- int ret;
-
- /* Ensure GPM receives fw up/down after CS is stopped */
- udelay(1);
-
- /* Wait for forcewake request to complete in GPM */
- ret = __intel_wait_for_register_fw(gt->uncore,
- GEN9_PWRGT_DOMAIN_STATUS,
- fw_mask, fw_mask, 5000, 0, NULL);
-
- /* Ensure CS receives fw ack from GPM */
- udelay(1);
-
- if (ret)
- GT_TRACE(gt, "Failed to complete pending forcewake %d\n", ret);
-}
-
-/*
- * Wa_22011802037:gen12: In addition to stopping the cs, we need to wait for any
- * pending MI_FORCE_WAKEUP requests that the CS has initiated to complete. The
- * pending status is indicated by bits[13:9] (masked by bits[ 29:25]) in the
- * MSG_IDLE register. There's one MSG_IDLE register per reset domain. Since we
- * are concerned only with the gt reset here, we use a logical OR of pending
- * forcewakeups from all reset domains and then wait for them to complete by
- * querying PWRGT_DOMAIN_STATUS.
- */
static void guc_engine_reset_prepare(struct intel_engine_cs *engine)
{
- u32 fw_pending;
-
- if (GRAPHICS_VER(engine->i915) != 12)
+ if (!IS_GRAPHICS_VER(engine->i915, 11, 12))
return;
- /*
- * Wa_22011802037
- * TODO: Occasionally trying to stop the cs times out, but does not
- * adversely affect functionality. The timeout is set as a config
- * parameter that defaults to 100ms. Assuming that this timeout is
- * sufficient for any pending MI_FORCEWAKEs to complete, ignore the
- * timeout returned here until it is root caused.
- */
intel_engine_stop_cs(engine);
- fw_pending = __cs_pending_mi_force_wakes(engine);
- if (fw_pending)
- __gpm_wait_for_fw_complete(engine->gt, fw_pending);
+ /*
+ * Wa_22011802037:gen11/gen12: In addition to stopping the cs, we need
+ * to wait for any pending mi force wakeups
+ */
+ intel_engine_wait_for_pending_mi_fw(engine);
}
static void guc_reset_nop(struct intel_engine_cs *engine)
goto out_free_dma;
for (i = 0; i < npages; i += max) {
- args.end = start + (max << PAGE_SHIFT);
+ if (args.start + (max << PAGE_SHIFT) > end)
+ args.end = end;
+ else
+ args.end = args.start + (max << PAGE_SHIFT);
+
ret = migrate_vma_setup(&args);
if (ret)
goto out_free_pfns;
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
-static int
+static enum drm_mode_status
simpledrm_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
const struct drm_display_mode *mode)
{
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
+ depends on SENSORS_LM90=n
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
will be called aht10.
config SENSORS_AQUACOMPUTER_D5NEXT
- tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
+ tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, and Farbwerk 360"
depends on USB_HID
select CRC16
help
If you say yes here you get support for sensors and fans of
- the Aquacomputer D5 Next watercooling pump, Octo fan
- controller, Farbwerk and Farbwerk 360 RGB controllers, where
+ the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
+ controllers, Farbwerk and Farbwerk 360 RGB controllers, where
available.
This driver can also be built as a module. If so, the module
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on X86 && I2C
+ depends on (X86 || COMPILE_TEST) && I2C
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
- depends on X86 && I2C
+ depends on (X86 || COMPILE_TEST) && I2C
help
If you say yes here you get support for the following Fujitsu
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
config SENSORS_MAX6642
tristate "Maxim MAX6642 sensor chip"
depends on I2C
+ depends on SENSORS_LM90=n
help
If you say yes here you get support for MAX6642 sensor chip.
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
tristate "National Semiconductor LM90 and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
- Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, MAX6657, MAX6658,
- MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696,
- ON Semiconductor NCT1008, Winbond/Nuvoton W83L771W/G/AWG/ASG,
- Philips SA56004, GMT G781, Texas Instruments TMP451 and TMP461
+ If you say yes here you get support for National Semiconductor LM84,
+ LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
+ ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
+ Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
+ MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
+ MAX6696,
+ ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
+ Winbond/Nuvoton W83L771W/G/AWG/ASG,
+ Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
sensor chips.
This driver can also be built as a module. If so, the module
// SPDX-License-Identifier: GPL-2.0+
/*
- * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
+ * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
+ * Quadro)
*
* Aquacomputer devices send HID reports (with ID 0x01) every second to report
* sensor values.
#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
#define USB_PRODUCT_ID_FARBWERK 0xf00a
+#define USB_PRODUCT_ID_QUADRO 0xf00d
#define USB_PRODUCT_ID_D5NEXT 0xf00e
#define USB_PRODUCT_ID_FARBWERK360 0xf010
#define USB_PRODUCT_ID_OCTO 0xf011
-enum kinds { d5next, farbwerk, farbwerk360, octo };
+enum kinds { d5next, farbwerk, farbwerk360, octo, quadro };
static const char *const aqc_device_names[] = {
[d5next] = "d5next",
[farbwerk] = "farbwerk",
[farbwerk360] = "farbwerk360",
- [octo] = "octo"
+ [octo] = "octo",
+ [quadro] = "quadro"
};
#define DRIVER_NAME "aquacomputer_d5next"
0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6
};
-/* Register offsets for the D5 Next pump */
-#define D5NEXT_POWER_CYCLES 24
-
-#define D5NEXT_COOLANT_TEMP 87
-
-#define D5NEXT_PUMP_SPEED 116
-#define D5NEXT_FAN_SPEED 103
-
-#define D5NEXT_PUMP_POWER 114
-#define D5NEXT_FAN_POWER 101
-
-#define D5NEXT_PUMP_VOLTAGE 110
-#define D5NEXT_FAN_VOLTAGE 97
-#define D5NEXT_5V_VOLTAGE 57
+/* Register offsets for all Aquacomputer devices */
+#define AQC_TEMP_SENSOR_SIZE 0x02
+#define AQC_TEMP_SENSOR_DISCONNECTED 0x7FFF
+#define AQC_FAN_PERCENT_OFFSET 0x00
+#define AQC_FAN_VOLTAGE_OFFSET 0x02
+#define AQC_FAN_CURRENT_OFFSET 0x04
+#define AQC_FAN_POWER_OFFSET 0x06
+#define AQC_FAN_SPEED_OFFSET 0x08
-#define D5NEXT_PUMP_CURRENT 112
-#define D5NEXT_FAN_CURRENT 99
+/* Register offsets for the D5 Next pump */
+#define D5NEXT_POWER_CYCLES 0x18
+#define D5NEXT_COOLANT_TEMP 0x57
+#define D5NEXT_NUM_FANS 2
+#define D5NEXT_NUM_SENSORS 1
+#define D5NEXT_PUMP_OFFSET 0x6c
+#define D5NEXT_FAN_OFFSET 0x5f
+#define D5NEXT_5V_VOLTAGE 0x39
+#define D5NEXT_12V_VOLTAGE 0x37
+#define D5NEXT_CTRL_REPORT_SIZE 0x329
+static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
+
+/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
+static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
/* Register offsets for the Farbwerk RGB controller */
#define FARBWERK_NUM_SENSORS 4
#define FARBWERK_SENSOR_START 0x2f
-#define FARBWERK_SENSOR_SIZE 0x02
-#define FARBWERK_SENSOR_DISCONNECTED 0x7FFF
/* Register offsets for the Farbwerk 360 RGB controller */
#define FARBWERK360_NUM_SENSORS 4
#define FARBWERK360_SENSOR_START 0x32
-#define FARBWERK360_SENSOR_SIZE 0x02
-#define FARBWERK360_SENSOR_DISCONNECTED 0x7FFF
/* Register offsets for the Octo fan controller */
#define OCTO_POWER_CYCLES 0x18
#define OCTO_NUM_FANS 8
-#define OCTO_FAN_PERCENT_OFFSET 0x00
-#define OCTO_FAN_VOLTAGE_OFFSET 0x02
-#define OCTO_FAN_CURRENT_OFFSET 0x04
-#define OCTO_FAN_POWER_OFFSET 0x06
-#define OCTO_FAN_SPEED_OFFSET 0x08
-
-static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
-
#define OCTO_NUM_SENSORS 4
#define OCTO_SENSOR_START 0x3D
-#define OCTO_SENSOR_SIZE 0x02
-#define OCTO_SENSOR_DISCONNECTED 0x7FFF
-
-#define OCTO_CTRL_REPORT_SIZE 0x65F
-#define OCTO_CTRL_REPORT_CHECKSUM_OFFSET 0x65D
-#define OCTO_CTRL_REPORT_CHECKSUM_START 0x01
-#define OCTO_CTRL_REPORT_CHECKSUM_LENGTH 0x65C
+#define OCTO_CTRL_REPORT_SIZE 0x65F
+static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
/* Fan speed registers in Octo control report (from 0-100%) */
static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };
+/* Register offsets for the Quadro fan controller */
+#define QUADRO_POWER_CYCLES 0x18
+#define QUADRO_NUM_FANS 4
+#define QUADRO_NUM_SENSORS 4
+#define QUADRO_SENSOR_START 0x34
+#define QUADRO_CTRL_REPORT_SIZE 0x3c1
+#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
+static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
+
+/* Fan speed registers in Quadro control report (from 0-100%) */
+static u16 quadro_ctrl_fan_offsets[] = { 0x36, 0x8b, 0xe0, 0x135 };
+
/* Labels for D5 Next */
static const char *const label_d5next_temp[] = {
"Coolant temp"
static const char *const label_d5next_voltages[] = {
"Pump voltage",
"Fan voltage",
- "+5V voltage"
+ "+5V voltage",
+ "+12V voltage"
};
static const char *const label_d5next_current[] = {
"Fan current"
};
-/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
+/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */
static const char *const label_temp_sensors[] = {
"Sensor 1",
"Sensor 2",
"Sensor 4"
};
-/* Labels for Octo */
+/* Labels for Octo and Quadro (except speed) */
static const char *const label_fan_speed[] = {
"Fan 1 speed",
"Fan 2 speed",
"Fan 8 current"
};
+/* Labels for Quadro fan speeds */
+static const char *const label_quadro_speeds[] = {
+ "Fan 1 speed",
+ "Fan 2 speed",
+ "Fan 3 speed",
+ "Fan 4 speed",
+ "Flow speed [dL/h]"
+};
+
struct aqc_data {
struct hid_device *hdev;
struct device *hwmon_dev;
int checksum_length;
int checksum_offset;
+ int num_fans;
+ u8 *fan_sensor_offsets;
+ u16 *fan_ctrl_offsets;
+ int num_temp_sensors;
+ int temp_sensor_start_offset;
+ u16 power_cycle_count_offset;
+ u8 flow_sensor_offset;
+
/* General info, same across all devices */
u32 serial_number[2];
u16 firmware_version;
- /* How many times the device was powered on */
+ /* How many times the device was powered on, if available */
u32 power_cycles;
/* Sensor values */
switch (type) {
case hwmon_temp:
- switch (priv->kind) {
- case d5next:
- if (channel == 0)
- return 0444;
- break;
- case farbwerk:
- case farbwerk360:
- case octo:
+ if (channel < priv->num_temp_sensors)
return 0444;
- default:
- break;
- }
break;
case hwmon_pwm:
- switch (priv->kind) {
- case octo:
+ if (priv->fan_ctrl_offsets && channel < priv->num_fans) {
switch (attr) {
case hwmon_pwm_input:
return 0644;
default:
break;
}
- break;
- default:
- break;
}
break;
case hwmon_fan:
- case hwmon_power:
- case hwmon_curr:
switch (priv->kind) {
- case d5next:
- if (channel < 2)
+ case quadro:
+ /* Special case to support flow sensor */
+ if (channel < priv->num_fans + 1)
return 0444;
break;
- case octo:
- return 0444;
default:
+ if (channel < priv->num_fans)
+ return 0444;
break;
}
break;
+ case hwmon_power:
+ case hwmon_curr:
+ if (channel < priv->num_fans)
+ return 0444;
+ break;
case hwmon_in:
switch (priv->kind) {
case d5next:
- if (channel < 3)
+ /* Special case to support +5V and +12V voltage sensors */
+ if (channel < priv->num_fans + 2)
return 0444;
break;
- case octo:
- return 0444;
default:
+ if (channel < priv->num_fans)
+ return 0444;
break;
}
break;
*val = priv->power_input[channel];
break;
case hwmon_pwm:
- switch (priv->kind) {
- case octo:
- ret = aqc_get_ctrl_val(priv, octo_ctrl_fan_offsets[channel]);
+ if (priv->fan_ctrl_offsets) {
+ ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel]);
if (ret < 0)
return ret;
*val = aqc_percent_to_pwm(ret);
- break;
- default:
- break;
}
break;
case hwmon_in:
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
- switch (priv->kind) {
- case octo:
+ if (priv->fan_ctrl_offsets) {
pwm_value = aqc_pwm_to_percent(val);
if (pwm_value < 0)
return pwm_value;
- ret = aqc_set_ctrl_val(priv, octo_ctrl_fan_offsets[channel],
+ ret = aqc_set_ctrl_val(priv, priv->fan_ctrl_offsets[channel],
pwm_value);
if (ret < 0)
return ret;
- break;
- default:
- break;
}
break;
default:
priv->serial_number[1] = get_unaligned_be16(data + SERIAL_SECOND_PART);
priv->firmware_version = get_unaligned_be16(data + FIRMWARE_VERSION);
- /* Sensor readings */
- switch (priv->kind) {
- case d5next:
- priv->power_cycles = get_unaligned_be32(data + D5NEXT_POWER_CYCLES);
-
- priv->temp_input[0] = get_unaligned_be16(data + D5NEXT_COOLANT_TEMP) * 10;
+ /* Temperature sensor readings */
+ for (i = 0; i < priv->num_temp_sensors; i++) {
+ sensor_value = get_unaligned_be16(data +
+ priv->temp_sensor_start_offset +
+ i * AQC_TEMP_SENSOR_SIZE);
+ if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
+ priv->temp_input[i] = -ENODATA;
+ else
+ priv->temp_input[i] = sensor_value * 10;
+ }
- priv->speed_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_SPEED);
- priv->speed_input[1] = get_unaligned_be16(data + D5NEXT_FAN_SPEED);
+ /* Fan speed and related readings */
+ for (i = 0; i < priv->num_fans; i++) {
+ priv->speed_input[i] =
+ get_unaligned_be16(data + priv->fan_sensor_offsets[i] + AQC_FAN_SPEED_OFFSET);
+ priv->power_input[i] =
+ get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
+ AQC_FAN_POWER_OFFSET) * 10000;
+ priv->voltage_input[i] =
+ get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
+ AQC_FAN_VOLTAGE_OFFSET) * 10;
+ priv->current_input[i] =
+ get_unaligned_be16(data + priv->fan_sensor_offsets[i] + AQC_FAN_CURRENT_OFFSET);
+ }
- priv->power_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_POWER) * 10000;
- priv->power_input[1] = get_unaligned_be16(data + D5NEXT_FAN_POWER) * 10000;
+ if (priv->power_cycle_count_offset != 0)
+ priv->power_cycles = get_unaligned_be32(data + priv->power_cycle_count_offset);
- priv->voltage_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_VOLTAGE) * 10;
- priv->voltage_input[1] = get_unaligned_be16(data + D5NEXT_FAN_VOLTAGE) * 10;
+ /* Special-case sensor readings */
+ switch (priv->kind) {
+ case d5next:
priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
-
- priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
- priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
- break;
- case farbwerk:
- /* Temperature sensor readings */
- for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
- sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
- i * FARBWERK_SENSOR_SIZE);
- if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
- priv->temp_input[i] = -ENODATA;
- else
- priv->temp_input[i] = sensor_value * 10;
- }
- break;
- case farbwerk360:
- /* Temperature sensor readings */
- for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
- sensor_value = get_unaligned_be16(data + FARBWERK360_SENSOR_START +
- i * FARBWERK360_SENSOR_SIZE);
- if (sensor_value == FARBWERK360_SENSOR_DISCONNECTED)
- priv->temp_input[i] = -ENODATA;
- else
- priv->temp_input[i] = sensor_value * 10;
- }
+ priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
break;
- case octo:
- priv->power_cycles = get_unaligned_be32(data + OCTO_POWER_CYCLES);
-
- /* Fan speed and related readings */
- for (i = 0; i < OCTO_NUM_FANS; i++) {
- priv->speed_input[i] =
- get_unaligned_be16(data + octo_sensor_fan_offsets[i] +
- OCTO_FAN_SPEED_OFFSET);
- priv->power_input[i] =
- get_unaligned_be16(data + octo_sensor_fan_offsets[i] +
- OCTO_FAN_POWER_OFFSET) * 10000;
- priv->voltage_input[i] =
- get_unaligned_be16(data + octo_sensor_fan_offsets[i] +
- OCTO_FAN_VOLTAGE_OFFSET) * 10;
- priv->current_input[i] =
- get_unaligned_be16(data + octo_sensor_fan_offsets[i] +
- OCTO_FAN_CURRENT_OFFSET);
- }
-
- /* Temperature sensor readings */
- for (i = 0; i < OCTO_NUM_SENSORS; i++) {
- sensor_value = get_unaligned_be16(data + OCTO_SENSOR_START +
- i * OCTO_SENSOR_SIZE);
- if (sensor_value == OCTO_SENSOR_DISCONNECTED)
- priv->temp_input[i] = -ENODATA;
- else
- priv->temp_input[i] = sensor_value * 10;
- }
+ case quadro:
+ priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset);
break;
default:
break;
debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops);
debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops);
- switch (priv->kind) {
- case d5next:
- case octo:
+ if (priv->power_cycle_count_offset != 0)
debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops);
- break;
- default:
- break;
- }
}
#else
case USB_PRODUCT_ID_D5NEXT:
priv->kind = d5next;
+ priv->num_fans = D5NEXT_NUM_FANS;
+ priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
+ priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
+ priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
+ priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
+ priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
+ priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
+
priv->temp_label = label_d5next_temp;
priv->speed_label = label_d5next_speeds;
priv->power_label = label_d5next_power;
case USB_PRODUCT_ID_FARBWERK:
priv->kind = farbwerk;
+ priv->num_fans = 0;
+ priv->num_temp_sensors = FARBWERK_NUM_SENSORS;
+ priv->temp_sensor_start_offset = FARBWERK_SENSOR_START;
priv->temp_label = label_temp_sensors;
break;
case USB_PRODUCT_ID_FARBWERK360:
priv->kind = farbwerk360;
+ priv->num_fans = 0;
+ priv->num_temp_sensors = FARBWERK360_NUM_SENSORS;
+ priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START;
priv->temp_label = label_temp_sensors;
break;
case USB_PRODUCT_ID_OCTO:
priv->kind = octo;
+
+ priv->num_fans = OCTO_NUM_FANS;
+ priv->fan_sensor_offsets = octo_sensor_fan_offsets;
+ priv->fan_ctrl_offsets = octo_ctrl_fan_offsets;
+ priv->num_temp_sensors = OCTO_NUM_SENSORS;
+ priv->temp_sensor_start_offset = OCTO_SENSOR_START;
+ priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
- priv->checksum_start = OCTO_CTRL_REPORT_CHECKSUM_START;
- priv->checksum_length = OCTO_CTRL_REPORT_CHECKSUM_LENGTH;
- priv->checksum_offset = OCTO_CTRL_REPORT_CHECKSUM_OFFSET;
priv->temp_label = label_temp_sensors;
priv->speed_label = label_fan_speed;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
break;
+ case USB_PRODUCT_ID_QUADRO:
+ priv->kind = quadro;
+
+ priv->num_fans = QUADRO_NUM_FANS;
+ priv->fan_sensor_offsets = quadro_sensor_fan_offsets;
+ priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
+ priv->num_temp_sensors = QUADRO_NUM_SENSORS;
+ priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
+ priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
+ priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
+ priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
+
+ priv->temp_label = label_temp_sensors;
+ priv->speed_label = label_quadro_speeds;
+ priv->power_label = label_fan_power;
+ priv->voltage_label = label_fan_voltage;
+ priv->current_label = label_fan_current;
+ break;
default:
break;
}
+ if (priv->buffer_size != 0) {
+ priv->checksum_start = 0x01;
+ priv->checksum_length = priv->buffer_size - 3;
+ priv->checksum_offset = priv->buffer_size - 2;
+ }
+
priv->name = aqc_device_names[priv->kind];
priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL);
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
{ }
};
* 11: reserved.
*/
#define M_TACH_MODE 0x02 /* 10b */
-#define M_TACH_UNIT 0x0210
+#define M_TACH_UNIT 0x0420
#define INIT_FAN_CTRL 0xFF
/* How long we sleep in us while waiting for an RPM result. */
/* ACPI mutex for locking access to the EC for the firmware */
#define ASUS_HW_ACCESS_MUTEX_ASMX "\\AMW0.ASMX"
+#define ASUS_HW_ACCESS_MUTEX_RMTW_ASMX "\\RMTW.ASMX"
+
+#define ASUS_HW_ACCESS_MUTEX_SB_PCI0_SBRG_SIO1_MUT0 "\\_SB_.PCI0.SBRG.SIO1.MUT0"
+
#define MAX_IDENTICAL_BOARD_VARIATIONS 3
/* Moniker for the ACPI global lock (':' is not allowed in ASL identifiers) */
ec_sensor_temp_water_in,
/* "Water_Out" temperature sensor reading [℃] */
ec_sensor_temp_water_out,
+ /* "Water_Block_In" temperature sensor reading [℃] */
+ ec_sensor_temp_water_block_in,
+ /* "Water_Block_Out" temperature sensor reading [℃] */
+ ec_sensor_temp_water_block_out,
+ /* "T_sensor_2" temperature sensor reading [℃] */
+ ec_sensor_temp_t_sensor_2,
+ /* "Extra_1" temperature sensor reading [℃] */
+ ec_sensor_temp_sensor_extra_1,
+ /* "Extra_2" temperature sensor reading [℃] */
+ ec_sensor_temp_sensor_extra_2,
+ /* "Extra_3" temperature sensor reading [℃] */
+ ec_sensor_temp_sensor_extra_3,
};
#define SENSOR_TEMP_CHIPSET BIT(ec_sensor_temp_chipset)
#define SENSOR_CURR_CPU BIT(ec_sensor_curr_cpu)
#define SENSOR_TEMP_WATER_IN BIT(ec_sensor_temp_water_in)
#define SENSOR_TEMP_WATER_OUT BIT(ec_sensor_temp_water_out)
+#define SENSOR_TEMP_WATER_BLOCK_IN BIT(ec_sensor_temp_water_block_in)
+#define SENSOR_TEMP_WATER_BLOCK_OUT BIT(ec_sensor_temp_water_block_out)
+#define SENSOR_TEMP_T_SENSOR_2 BIT(ec_sensor_temp_t_sensor_2)
+#define SENSOR_TEMP_SENSOR_EXTRA_1 BIT(ec_sensor_temp_sensor_extra_1)
+#define SENSOR_TEMP_SENSOR_EXTRA_2 BIT(ec_sensor_temp_sensor_extra_2)
+#define SENSOR_TEMP_SENSOR_EXTRA_3 BIT(ec_sensor_temp_sensor_extra_3)
enum board_family {
family_unknown,
family_amd_400_series,
family_amd_500_series,
+ family_intel_300_series,
+ family_intel_600_series
};
/* All the known sensors for ASUS EC controllers */
EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
[ec_sensor_temp_water_out] =
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
+ [ec_sensor_temp_water_block_in] =
+ EC_SENSOR("Water_Block_In", hwmon_temp, 1, 0x01, 0x02),
+ [ec_sensor_temp_water_block_out] =
+ EC_SENSOR("Water_Block_Out", hwmon_temp, 1, 0x01, 0x03),
+ [ec_sensor_temp_sensor_extra_1] =
+ EC_SENSOR("Extra_1", hwmon_temp, 1, 0x01, 0x09),
+ [ec_sensor_temp_t_sensor_2] =
+ EC_SENSOR("T_sensor_2", hwmon_temp, 1, 0x01, 0x0a),
+ [ec_sensor_temp_sensor_extra_2] =
+ EC_SENSOR("Extra_2", hwmon_temp, 1, 0x01, 0x0b),
+ [ec_sensor_temp_sensor_extra_3] =
+ EC_SENSOR("Extra_3", hwmon_temp, 1, 0x01, 0x0c),
+};
+
+static const struct ec_sensor_info sensors_family_intel_300[] = {
+ [ec_sensor_temp_chipset] =
+ EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+ [ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+ [ec_sensor_temp_mb] =
+ EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+ [ec_sensor_temp_t_sensor] =
+ EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+ [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+ [ec_sensor_fan_cpu_opt] =
+ EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
+ [ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+ [ec_sensor_fan_water_flow] =
+ EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
+ [ec_sensor_temp_water_in] =
+ EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
+ [ec_sensor_temp_water_out] =
+ EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
+};
+
+static const struct ec_sensor_info sensors_family_intel_600[] = {
+ [ec_sensor_temp_t_sensor] =
+ EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+ [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
};
/* Shortcuts for common combinations */
#define SENSOR_SET_TEMP_CHIPSET_CPU_MB \
(SENSOR_TEMP_CHIPSET | SENSOR_TEMP_CPU | SENSOR_TEMP_MB)
#define SENSOR_SET_TEMP_WATER (SENSOR_TEMP_WATER_IN | SENSOR_TEMP_WATER_OUT)
+#define SENSOR_SET_WATER_BLOCK \
+ (SENSOR_TEMP_WATER_BLOCK_IN | SENSOR_TEMP_WATER_BLOCK_OUT)
+
struct ec_board_info {
const char *board_names[MAX_IDENTICAL_BOARD_VARIATIONS];
.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
},
+ {
+ .board_names = {
+ "ROG MAXIMUS XI HERO",
+ "ROG MAXIMUS XI HERO (WI-FI)",
+ },
+ .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+ SENSOR_TEMP_T_SENSOR |
+ SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+ SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+ .family = family_intel_300_series,
+ },
{
.board_names = {"ROG CROSSHAIR VIII IMPACT"},
.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
},
{
.board_names = {"ROG STRIX X570-I GAMING"},
- .sensors = SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
- SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
- SENSOR_IN_CPU_CORE,
+ .sensors = SENSOR_TEMP_CHIPSET | SENSOR_TEMP_VRM |
+ SENSOR_TEMP_T_SENSOR |
+ SENSOR_FAN_VRM_HS | SENSOR_FAN_CHIPSET |
+ SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
},
+ {
+ .board_names = {"ROG STRIX Z690-A GAMING WIFI D4"},
+ .sensors = SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_RMTW_ASMX,
+ .family = family_intel_600_series,
+ },
+ {
+ .board_names = {"ROG ZENITH II EXTREME"},
+ .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
+ SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+ SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET | SENSOR_FAN_VRM_HS |
+ SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE |
+ SENSOR_SET_WATER_BLOCK |
+ SENSOR_TEMP_T_SENSOR_2 | SENSOR_TEMP_SENSOR_EXTRA_1 |
+ SENSOR_TEMP_SENSOR_EXTRA_2 | SENSOR_TEMP_SENSOR_EXTRA_3,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_SB_PCI0_SBRG_SIO1_MUT0,
+ .family = family_amd_500_series,
+ },
{}
};
case family_amd_500_series:
ec_data->sensors_info = sensors_family_amd_500;
break;
+ case family_intel_300_series:
+ ec_data->sensors_info = sensors_family_intel_300;
+ break;
+ case family_intel_600_series:
+ ec_data->sensors_info = sensors_family_intel_600;
+ break;
default:
dev_err(dev, "Unknown board family: %d",
ec_data->board_info->family);
int i, idx;
int err;
- temp_sensor = devm_kcalloc(dev, 1, sizeof(*temp_sensor), GFP_KERNEL);
- if (!temp_sensor)
- return -ENOMEM;
-
for (i = 0; i < sensor_data->wmi.sensor_count; i++) {
- err = asus_wmi_sensor_info(i, temp_sensor);
+ struct asus_wmi_sensor_info sensor;
+
+ err = asus_wmi_sensor_info(i, &sensor);
if (err)
return err;
- switch (temp_sensor->data_type) {
+ switch (sensor.data_type) {
case TEMPERATURE_C:
case VOLTAGE:
case CURRENT:
case FAN_RPM:
case WATER_FLOW:
- type = asus_data_types[temp_sensor->data_type];
+ type = asus_data_types[sensor.data_type];
if (!nr_count[type])
nr_types++;
nr_count[type]++;
unsigned int edx;
unsigned int esi;
unsigned int edi;
-} __packed;
+};
static const char * const temp_labels[] = {
"CPU",
struct smm_regs *regs = par;
int eax = regs->eax;
int ebx = regs->ebx;
+ unsigned char carry;
long long duration;
- int rc;
/* SMM requires CPU 0 */
if (smp_processor_id() != 0)
return -EBUSY;
-#if defined(CONFIG_X86_64)
- asm volatile("pushq %%rax\n\t"
- "movl 0(%%rax),%%edx\n\t"
- "pushq %%rdx\n\t"
- "movl 4(%%rax),%%ebx\n\t"
- "movl 8(%%rax),%%ecx\n\t"
- "movl 12(%%rax),%%edx\n\t"
- "movl 16(%%rax),%%esi\n\t"
- "movl 20(%%rax),%%edi\n\t"
- "popq %%rax\n\t"
- "out %%al,$0xb2\n\t"
- "out %%al,$0x84\n\t"
- "xchgq %%rax,(%%rsp)\n\t"
- "movl %%ebx,4(%%rax)\n\t"
- "movl %%ecx,8(%%rax)\n\t"
- "movl %%edx,12(%%rax)\n\t"
- "movl %%esi,16(%%rax)\n\t"
- "movl %%edi,20(%%rax)\n\t"
- "popq %%rdx\n\t"
- "movl %%edx,0(%%rax)\n\t"
- "pushfq\n\t"
- "popq %%rax\n\t"
- "andl $1,%%eax\n"
- : "=a"(rc)
- : "a"(regs)
- : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
-#else
- asm volatile("pushl %%eax\n\t"
- "movl 0(%%eax),%%edx\n\t"
- "push %%edx\n\t"
- "movl 4(%%eax),%%ebx\n\t"
- "movl 8(%%eax),%%ecx\n\t"
- "movl 12(%%eax),%%edx\n\t"
- "movl 16(%%eax),%%esi\n\t"
- "movl 20(%%eax),%%edi\n\t"
- "popl %%eax\n\t"
- "out %%al,$0xb2\n\t"
- "out %%al,$0x84\n\t"
- "xchgl %%eax,(%%esp)\n\t"
- "movl %%ebx,4(%%eax)\n\t"
- "movl %%ecx,8(%%eax)\n\t"
- "movl %%edx,12(%%eax)\n\t"
- "movl %%esi,16(%%eax)\n\t"
- "movl %%edi,20(%%eax)\n\t"
- "popl %%edx\n\t"
- "movl %%edx,0(%%eax)\n\t"
- "lahf\n\t"
- "shrl $8,%%eax\n\t"
- "andl $1,%%eax\n"
- : "=a"(rc)
- : "a"(regs)
- : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
-#endif
- if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax)
- rc = -EINVAL;
+ asm volatile("out %%al,$0xb2\n\t"
+ "out %%al,$0x84\n\t"
+ "setc %0\n"
+ : "=mr" (carry),
+ "+a" (regs->eax),
+ "+b" (regs->ebx),
+ "+c" (regs->ecx),
+ "+d" (regs->edx),
+ "+S" (regs->esi),
+ "+D" (regs->edi));
duration = ktime_us_delta(ktime_get(), calltime);
- pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x (took %7lld usecs)\n", eax, ebx,
- (rc ? 0xffff : regs->eax & 0xffff), duration);
+ pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x carry: %d (took %7lld usecs)\n",
+ eax, ebx, regs->eax & 0xffff, carry, duration);
if (duration > DELL_SMM_MAX_DURATION)
pr_warn_once("SMM call took %lld usecs!\n", duration);
- return rc;
+ if (carry || (regs->eax & 0xffff) == 0xffff || regs->eax == eax)
+ return -EINVAL;
+
+ return 0;
}
/*
};
static const struct dmi_system_id i8k_dmi_table[] __initconst = {
+ {
+ .ident = "Dell G5 5590",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "G5 5590"),
+ },
+ },
{
.ident = "Dell Inspiron",
.matches = {
},
.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
},
+ {
+ .ident = "Dell XPS 13 7390",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 13 7390"),
+ },
+ .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
+ },
{ }
};
MODULE_AUTHOR("Guenter Roeck <linus@roeck-us.net>");
MODULE_DESCRIPTION("Hard drive temperature monitor");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:drivetemp");
#define SIO_F81768D_ID 0x1210 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define SIO_F81866_ID 0x1010 /* Chipset ID */
+#define SIO_F71858AD_ID 0x0903 /* Chipset ID */
#define SIO_F81966_ID 0x1502 /* Chipset ID */
#define REGION_LENGTH 8
sio_data->type = f71808a;
break;
case SIO_F71858_ID:
+ case SIO_F71858AD_ID:
sio_data->type = f71858fg;
break;
case SIO_F71862_ID:
/* fan controller base address */
fan = of_find_compatible_node(dev->parent->of_node, NULL, "gw,gsc-fan");
if (fan && of_property_read_u32(fan, "reg", &pdata->fan_base)) {
+ of_node_put(fan);
dev_err(dev, "fan node without base\n");
return ERR_PTR(-EINVAL);
}
+ of_node_put(fan);
+
/* allocate structures for channels and count instances of each type */
device_for_each_child_node(dev, child) {
if (fwnode_property_read_string(child, "label", &ch->name)) {
data->ccd_offset = 0x154;
k10temp_get_ccd_support(pdev, data, 8);
break;
+ case 0xa0 ... 0xaf:
+ data->ccd_offset = 0x300;
+ k10temp_get_ccd_support(pdev, data, 8);
+ break;
}
} else if (boot_cpu_data.x86 == 0x19) {
data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
data->ccd_offset = 0x300;
k10temp_get_ccd_support(pdev, data, 8);
break;
+ case 0x60 ... 0x6f:
+ case 0x70 ... 0x7f:
+ data->ccd_offset = 0x308;
+ k10temp_get_ccd_support(pdev, data, 8);
+ break;
case 0x10 ... 0x1f:
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) },
{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{}
};
* which contains this code, we don't worry about the wasted space.
*/
-#include <linux/kernel.h>
+#include <linux/minmax.h>
+#include <linux/types.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
* accordingly, and is done during initialization. Extended precision is only
* available at conversion rates of 1 Hz and slower. Note that extended
* precision is not enabled by default, as this driver initializes all chips
- * to 2 Hz by design.
+ * to 2 Hz by design. The driver also supports MAX6690, which is practically
+ * identical to MAX6654.
*
* This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
* MAX6692 chips made by Maxim. These are again similar to the LM86,
* and extended mode. They are mostly compatible with LM90 except for a data
* format difference for the temperature value registers.
*
+ * This driver also supports ADT7481, ADT7482, and ADT7483 from Analog Devices
+ * / ON Semiconductor. The chips are similar to ADT7461 but support two external
+ * temperature sensors.
+ *
+ * This driver also supports NCT72, NCT214, and NCT218 from ON Semiconductor.
+ * The chips are similar to ADT7461/ADT7461A but have full PEC support
+ * (undocumented).
+ *
* This driver also supports the SA56004 from Philips. This device is
* pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
*
* They are mostly compatible with ADT7461 except for local temperature
* low byte register and max conversion rate.
*
+ * This driver also supports MAX1617 and various clones such as G767
+ * and NE1617. Such clones will be detected as MAX1617.
+ *
+ * This driver also supports NE1618 from Philips. It is similar to NE1617
+ * but supports 11 bit external temperature values.
+ *
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
* concern all supported chipsets, unless mentioned otherwise.
*/
-#include <linux/module.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/slab.h>
+#include <linux/interrupt.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
#include <linux/hwmon.h>
-#include <linux/err.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
-#include <linux/sysfs.h>
-#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+/* The maximum number of channels currently supported */
+#define MAX_CHANNELS 3
/*
* Addresses to scan
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- max6646, w83l771, max6696, sa56004, g781, tmp451, tmp461, max6654 };
+enum chips { adm1023, adm1032, adt7461, adt7461a, adt7481,
+ g781, lm84, lm90, lm99,
+ max1617, max6642, max6646, max6648, max6654, max6657, max6659, max6680, max6696,
+ nct210, nct72, ne1618, sa56004, tmp451, tmp461, w83l771,
+};
/*
* The LM90 registers
*/
-#define LM90_REG_R_MAN_ID 0xFE
-#define LM90_REG_R_CHIP_ID 0xFF
-#define LM90_REG_R_CONFIG1 0x03
-#define LM90_REG_W_CONFIG1 0x09
-#define LM90_REG_R_CONFIG2 0xBF
-#define LM90_REG_W_CONFIG2 0xBF
-#define LM90_REG_R_CONVRATE 0x04
-#define LM90_REG_W_CONVRATE 0x0A
-#define LM90_REG_R_STATUS 0x02
-#define LM90_REG_R_LOCAL_TEMP 0x00
-#define LM90_REG_R_LOCAL_HIGH 0x05
-#define LM90_REG_W_LOCAL_HIGH 0x0B
-#define LM90_REG_R_LOCAL_LOW 0x06
-#define LM90_REG_W_LOCAL_LOW 0x0C
-#define LM90_REG_R_LOCAL_CRIT 0x20
-#define LM90_REG_W_LOCAL_CRIT 0x20
-#define LM90_REG_R_REMOTE_TEMPH 0x01
-#define LM90_REG_R_REMOTE_TEMPL 0x10
-#define LM90_REG_R_REMOTE_OFFSH 0x11
-#define LM90_REG_W_REMOTE_OFFSH 0x11
-#define LM90_REG_R_REMOTE_OFFSL 0x12
-#define LM90_REG_W_REMOTE_OFFSL 0x12
-#define LM90_REG_R_REMOTE_HIGHH 0x07
-#define LM90_REG_W_REMOTE_HIGHH 0x0D
-#define LM90_REG_R_REMOTE_HIGHL 0x13
-#define LM90_REG_W_REMOTE_HIGHL 0x13
-#define LM90_REG_R_REMOTE_LOWH 0x08
-#define LM90_REG_W_REMOTE_LOWH 0x0E
-#define LM90_REG_R_REMOTE_LOWL 0x14
-#define LM90_REG_W_REMOTE_LOWL 0x14
-#define LM90_REG_R_REMOTE_CRIT 0x19
-#define LM90_REG_W_REMOTE_CRIT 0x19
-#define LM90_REG_R_TCRIT_HYST 0x21
-#define LM90_REG_W_TCRIT_HYST 0x21
+#define LM90_REG_MAN_ID 0xFE
+#define LM90_REG_CHIP_ID 0xFF
+#define LM90_REG_CONFIG1 0x03
+#define LM90_REG_CONFIG2 0xBF
+#define LM90_REG_CONVRATE 0x04
+#define LM90_REG_STATUS 0x02
+#define LM90_REG_LOCAL_TEMP 0x00
+#define LM90_REG_LOCAL_HIGH 0x05
+#define LM90_REG_LOCAL_LOW 0x06
+#define LM90_REG_LOCAL_CRIT 0x20
+#define LM90_REG_REMOTE_TEMPH 0x01
+#define LM90_REG_REMOTE_TEMPL 0x10
+#define LM90_REG_REMOTE_OFFSH 0x11
+#define LM90_REG_REMOTE_OFFSL 0x12
+#define LM90_REG_REMOTE_HIGHH 0x07
+#define LM90_REG_REMOTE_HIGHL 0x13
+#define LM90_REG_REMOTE_LOWH 0x08
+#define LM90_REG_REMOTE_LOWL 0x14
+#define LM90_REG_REMOTE_CRIT 0x19
+#define LM90_REG_TCRIT_HYST 0x21
/* MAX6646/6647/6649/6654/6657/6658/6659/6695/6696 registers */
-#define MAX6657_REG_R_LOCAL_TEMPL 0x11
-#define MAX6696_REG_R_STATUS2 0x12
-#define MAX6659_REG_R_REMOTE_EMERG 0x16
-#define MAX6659_REG_W_REMOTE_EMERG 0x16
-#define MAX6659_REG_R_LOCAL_EMERG 0x17
-#define MAX6659_REG_W_LOCAL_EMERG 0x17
+#define MAX6657_REG_LOCAL_TEMPL 0x11
+#define MAX6696_REG_STATUS2 0x12
+#define MAX6659_REG_REMOTE_EMERG 0x16
+#define MAX6659_REG_LOCAL_EMERG 0x17
/* SA56004 registers */
-#define SA56004_REG_R_LOCAL_TEMPL 0x22
+#define SA56004_REG_LOCAL_TEMPL 0x22
#define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */
/* TMP451/TMP461 registers */
-#define TMP451_REG_R_LOCAL_TEMPL 0x15
+#define TMP451_REG_LOCAL_TEMPL 0x15
#define TMP451_REG_CONALERT 0x22
#define TMP461_REG_CHEN 0x16
#define TMP461_REG_DFC 0x24
-/*
- * Device flags
- */
-#define LM90_FLAG_ADT7461_EXT (1 << 0) /* ADT7461 extended mode */
+/* ADT7481 registers */
+#define ADT7481_REG_STATUS2 0x23
+#define ADT7481_REG_CONFIG2 0x24
+
+#define ADT7481_REG_MAN_ID 0x3e
+#define ADT7481_REG_CHIP_ID 0x3d
+
/* Device features */
-#define LM90_HAVE_OFFSET (1 << 1) /* temperature offset register */
-#define LM90_HAVE_REM_LIMIT_EXT (1 << 3) /* extended remote limit */
-#define LM90_HAVE_EMERGENCY (1 << 4) /* 3rd upper (emergency) limit */
-#define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm */
-#define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */
-#define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */
-#define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/
-#define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */
-#define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */
-#define LM90_HAVE_CRIT_ALRM_SWP (1 << 11)/* critical alarm bits swapped */
+#define LM90_HAVE_EXTENDED_TEMP BIT(0) /* extended temperature support */
+#define LM90_HAVE_OFFSET BIT(1) /* temperature offset register */
+#define LM90_HAVE_UNSIGNED_TEMP BIT(2) /* temperatures are unsigned */
+#define LM90_HAVE_REM_LIMIT_EXT BIT(3) /* extended remote limit */
+#define LM90_HAVE_EMERGENCY BIT(4) /* 3rd upper (emergency) limit */
+#define LM90_HAVE_EMERGENCY_ALARM BIT(5)/* emergency alarm */
+#define LM90_HAVE_TEMP3 BIT(6) /* 3rd temperature sensor */
+#define LM90_HAVE_BROKEN_ALERT BIT(7) /* Broken alert */
+#define LM90_PAUSE_FOR_CONFIG BIT(8) /* Pause conversion for config */
+#define LM90_HAVE_CRIT BIT(9) /* Chip supports CRIT/OVERT register */
+#define LM90_HAVE_CRIT_ALRM_SWP BIT(10) /* critical alarm bits swapped */
+#define LM90_HAVE_PEC BIT(11) /* Chip supports PEC */
+#define LM90_HAVE_PARTIAL_PEC BIT(12) /* Partial PEC support (adm1032)*/
+#define LM90_HAVE_ALARMS BIT(13) /* Create 'alarms' attribute */
+#define LM90_HAVE_EXT_UNSIGNED BIT(14) /* extended unsigned temperature*/
+#define LM90_HAVE_LOW BIT(15) /* low limits */
+#define LM90_HAVE_CONVRATE BIT(16) /* conversion rate */
+#define LM90_HAVE_REMOTE_EXT BIT(17) /* extended remote temperature */
+#define LM90_HAVE_FAULTQUEUE BIT(18) /* configurable samples count */
/* LM90 status */
-#define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */
-#define LM90_STATUS_RTHRM (1 << 1) /* remote THERM limit tripped */
-#define LM90_STATUS_ROPEN (1 << 2) /* remote is an open circuit */
-#define LM90_STATUS_RLOW (1 << 3) /* remote low temp limit tripped */
-#define LM90_STATUS_RHIGH (1 << 4) /* remote high temp limit tripped */
-#define LM90_STATUS_LLOW (1 << 5) /* local low temp limit tripped */
-#define LM90_STATUS_LHIGH (1 << 6) /* local high temp limit tripped */
-#define LM90_STATUS_BUSY (1 << 7) /* conversion is ongoing */
-
-#define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */
-#define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */
-#define MAX6696_STATUS2_R2LOW (1 << 3) /* remote2 low temp limit tripped */
-#define MAX6696_STATUS2_R2HIGH (1 << 4) /* remote2 high temp limit tripped */
-#define MAX6696_STATUS2_ROT2 (1 << 5) /* remote emergency limit tripped */
-#define MAX6696_STATUS2_R2OT2 (1 << 6) /* remote2 emergency limit tripped */
-#define MAX6696_STATUS2_LOT2 (1 << 7) /* local emergency limit tripped */
+#define LM90_STATUS_LTHRM BIT(0) /* local THERM limit tripped */
+#define LM90_STATUS_RTHRM BIT(1) /* remote THERM limit tripped */
+#define LM90_STATUS_ROPEN BIT(2) /* remote is an open circuit */
+#define LM90_STATUS_RLOW BIT(3) /* remote low temp limit tripped */
+#define LM90_STATUS_RHIGH BIT(4) /* remote high temp limit tripped */
+#define LM90_STATUS_LLOW BIT(5) /* local low temp limit tripped */
+#define LM90_STATUS_LHIGH BIT(6) /* local high temp limit tripped */
+#define LM90_STATUS_BUSY BIT(7) /* conversion is ongoing */
+
+/* MAX6695/6696 and ADT7481 2nd status register */
+#define MAX6696_STATUS2_R2THRM BIT(1) /* remote2 THERM limit tripped */
+#define MAX6696_STATUS2_R2OPEN BIT(2) /* remote2 is an open circuit */
+#define MAX6696_STATUS2_R2LOW BIT(3) /* remote2 low temp limit tripped */
+#define MAX6696_STATUS2_R2HIGH BIT(4) /* remote2 high temp limit tripped */
+#define MAX6696_STATUS2_ROT2 BIT(5) /* remote emergency limit tripped */
+#define MAX6696_STATUS2_R2OT2 BIT(6) /* remote2 emergency limit tripped */
+#define MAX6696_STATUS2_LOT2 BIT(7) /* local emergency limit tripped */
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id lm90_id[] = {
+ { "adm1020", max1617 },
+ { "adm1021", max1617 },
+ { "adm1023", adm1023 },
{ "adm1032", adm1032 },
+ { "adt7421", adt7461a },
{ "adt7461", adt7461 },
- { "adt7461a", adt7461 },
+ { "adt7461a", adt7461a },
+ { "adt7481", adt7481 },
+ { "adt7482", adt7481 },
+ { "adt7483a", adt7481 },
{ "g781", g781 },
+ { "gl523sm", max1617 },
+ { "lm84", lm84 },
+ { "lm86", lm90 },
+ { "lm89", lm90 },
{ "lm90", lm90 },
- { "lm86", lm86 },
- { "lm89", lm86 },
{ "lm99", lm99 },
+ { "max1617", max1617 },
+ { "max6642", max6642 },
{ "max6646", max6646 },
{ "max6647", max6646 },
+ { "max6648", max6648 },
{ "max6649", max6646 },
{ "max6654", max6654 },
{ "max6657", max6657 },
{ "max6659", max6659 },
{ "max6680", max6680 },
{ "max6681", max6680 },
+ { "max6690", max6654 },
+ { "max6692", max6648 },
{ "max6695", max6696 },
{ "max6696", max6696 },
- { "nct1008", adt7461 },
+ { "mc1066", max1617 },
+ { "nct1008", adt7461a },
+ { "nct210", nct210 },
+ { "nct214", nct72 },
+ { "nct218", nct72 },
+ { "nct72", nct72 },
+ { "ne1618", ne1618 },
{ "w83l771", w83l771 },
{ "sa56004", sa56004 },
+ { "thmc10", max1617 },
{ "tmp451", tmp451 },
{ "tmp461", tmp461 },
{ }
},
{
.compatible = "adi,adt7461a",
- .data = (void *)adt7461
+ .data = (void *)adt7461a
+ },
+ {
+ .compatible = "adi,adt7481",
+ .data = (void *)adt7481
},
{
.compatible = "gmt,g781",
},
{
.compatible = "national,lm86",
- .data = (void *)lm86
+ .data = (void *)lm90
},
{
.compatible = "national,lm89",
- .data = (void *)lm86
+ .data = (void *)lm90
},
{
.compatible = "national,lm99",
},
{
.compatible = "onnn,nct1008",
- .data = (void *)adt7461
+ .data = (void *)adt7461a
+ },
+ {
+ .compatible = "onnn,nct214",
+ .data = (void *)nct72
+ },
+ {
+ .compatible = "onnn,nct218",
+ .data = (void *)nct72
+ },
+ {
+ .compatible = "onnn,nct72",
+ .data = (void *)nct72
},
{
.compatible = "winbond,w83l771",
u16 alert_alarms; /* Which alarm bits trigger ALERT# */
/* Upper 8 bits for max6695/96 */
u8 max_convrate; /* Maximum conversion rate register value */
+ u8 resolution; /* 16-bit resolution (default 11 bit) */
+ u8 reg_status2; /* 2nd status register (optional) */
u8 reg_local_ext; /* Extended local temp register (optional) */
+ u8 faultqueue_mask; /* fault queue bit mask */
+ u8 faultqueue_depth; /* fault queue depth if mask is used */
};
static const struct lm90_params lm90_params[] = {
+ [adm1023] = {
+ .flags = LM90_HAVE_ALARMS | LM90_HAVE_OFFSET | LM90_HAVE_BROKEN_ALERT
+ | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
+ .alert_alarms = 0x7c,
+ .resolution = 8,
+ .max_convrate = 7,
+ },
[adm1032] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
+ | LM90_HAVE_PARTIAL_PEC | LM90_HAVE_ALARMS
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
[adt7461] = {
+ /*
+ * Standard temperature range is supposed to be unsigned,
+ * but that does not match reality. Negative temperatures
+ * are always reported.
+ */
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
+ | LM90_HAVE_CRIT | LM90_HAVE_PARTIAL_PEC
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
+ .alert_alarms = 0x7c,
+ .max_convrate = 10,
+ .resolution = 10,
+ },
+ [adt7461a] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
- | LM90_HAVE_CRIT,
+ | LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_ALARMS
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
+ [adt7481] = {
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
+ | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_PEC
+ | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
+ .alert_alarms = 0x1c7c,
+ .max_convrate = 11,
+ .resolution = 10,
+ .reg_status2 = ADT7481_REG_STATUS2,
+ },
[g781] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
- [lm86] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT,
- .alert_alarms = 0x7b,
- .max_convrate = 9,
+ [lm84] = {
+ .flags = LM90_HAVE_ALARMS,
+ .resolution = 8,
},
[lm90] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7b,
.max_convrate = 9,
+ .faultqueue_mask = BIT(0),
+ .faultqueue_depth = 3,
},
[lm99] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7b,
.max_convrate = 9,
+ .faultqueue_mask = BIT(0),
+ .faultqueue_depth = 3,
+ },
+ [max1617] = {
+ .flags = LM90_HAVE_CONVRATE | LM90_HAVE_BROKEN_ALERT |
+ LM90_HAVE_LOW | LM90_HAVE_ALARMS,
+ .alert_alarms = 0x78,
+ .resolution = 8,
+ .max_convrate = 7,
+ },
+ [max6642] = {
+ .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXT_UNSIGNED
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
+ .alert_alarms = 0x50,
+ .resolution = 10,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
+ .faultqueue_mask = BIT(4),
+ .faultqueue_depth = 2,
},
[max6646] = {
- .flags = LM90_HAVE_CRIT | LM90_HAVE_BROKEN_ALERT,
+ .flags = LM90_HAVE_CRIT | LM90_HAVE_BROKEN_ALERT
+ | LM90_HAVE_EXT_UNSIGNED | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 6,
- .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
+ },
+ [max6648] = {
+ .flags = LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_CRIT
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT,
+ .alert_alarms = 0x7c,
+ .max_convrate = 6,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6654] = {
- .flags = LM90_HAVE_BROKEN_ALERT,
+ .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 7,
- .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6657] = {
- .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT,
+ .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 8,
- .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6659] = {
- .flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT,
+ .flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 8,
- .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6680] = {
+ /*
+ * Apparent temperatures of 128 degrees C or higher are reported
+ * and treated as negative temperatures (meaning min_alarm will
+ * be set).
+ */
.flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT
- | LM90_HAVE_CRIT_ALRM_SWP | LM90_HAVE_BROKEN_ALERT,
+ | LM90_HAVE_CRIT_ALRM_SWP | LM90_HAVE_BROKEN_ALERT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[max6696] = {
.flags = LM90_HAVE_EMERGENCY
- | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT,
+ | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x1c7c,
.max_convrate = 6,
- .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
+ .reg_status2 = MAX6696_REG_STATUS2,
+ .reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
+ .faultqueue_mask = BIT(5),
+ .faultqueue_depth = 4,
+ },
+ [nct72] = {
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
+ | LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_UNSIGNED_TEMP
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT
+ | LM90_HAVE_FAULTQUEUE,
+ .alert_alarms = 0x7c,
+ .max_convrate = 10,
+ .resolution = 10,
+ },
+ [nct210] = {
+ .flags = LM90_HAVE_ALARMS | LM90_HAVE_BROKEN_ALERT
+ | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
+ .alert_alarms = 0x7c,
+ .resolution = 11,
+ .max_convrate = 7,
+ },
+ [ne1618] = {
+ .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_BROKEN_ALERT
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT,
+ .alert_alarms = 0x7c,
+ .resolution = 11,
+ .max_convrate = 7,
},
[w83l771] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
[sa56004] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT,
+ /*
+ * Apparent temperatures of 128 degrees C or higher are reported
+ * and treated as negative temperatures (meaning min_alarm will
+ * be set).
+ */
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7b,
.max_convrate = 9,
- .reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
+ .reg_local_ext = SA56004_REG_LOCAL_TEMPL,
+ .faultqueue_mask = BIT(0),
+ .faultqueue_depth = 3,
},
[tmp451] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
+ | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7c,
.max_convrate = 9,
- .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
+ .resolution = 12,
+ .reg_local_ext = TMP451_REG_LOCAL_TEMPL,
},
[tmp461] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+ | LM90_HAVE_REMOTE_EXT | LM90_HAVE_FAULTQUEUE,
.alert_alarms = 0x7c,
.max_convrate = 9,
- .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
+ .resolution = 12,
+ .reg_local_ext = TMP451_REG_LOCAL_TEMPL,
},
};
/*
- * TEMP8 register index
+ * temperature register index
*/
-enum lm90_temp8_reg_index {
+enum lm90_temp_reg_index {
LOCAL_LOW = 0,
LOCAL_HIGH,
LOCAL_CRIT,
REMOTE_EMERG, /* max6659 and max6695/96 */
REMOTE2_CRIT, /* max6695/96 only */
REMOTE2_EMERG, /* max6695/96 only */
- TEMP8_REG_NUM
-};
-/*
- * TEMP11 register index
- */
-enum lm90_temp11_reg_index {
- REMOTE_TEMP = 0,
+ REMOTE_TEMP,
REMOTE_LOW,
REMOTE_HIGH,
REMOTE_OFFSET, /* except max6646, max6657/58/59, and max6695/96 */
REMOTE2_TEMP, /* max6695/96 only */
REMOTE2_LOW, /* max6695/96 only */
REMOTE2_HIGH, /* max6695/96 only */
- TEMP11_REG_NUM
+ REMOTE2_OFFSET,
+
+ TEMP_REG_NUM
};
/*
struct lm90_data {
struct i2c_client *client;
struct device *hwmon_dev;
- u32 channel_config[4];
+ u32 chip_config[2];
+ u32 channel_config[MAX_CHANNELS + 1];
+ const char *channel_label[MAX_CHANNELS];
+ struct hwmon_channel_info chip_info;
struct hwmon_channel_info temp_info;
const struct hwmon_channel_info *info[3];
struct hwmon_chip_info chip;
struct mutex update_lock;
+ struct delayed_work alert_work;
+ struct work_struct report_work;
bool valid; /* true if register values are valid */
+ bool alarms_valid; /* true if status register values are valid */
unsigned long last_updated; /* in jiffies */
+ unsigned long alarms_updated; /* in jiffies */
int kind;
u32 flags;
u8 config; /* Current configuration register value */
u8 config_orig; /* Original configuration register value */
u8 convrate_orig; /* Original conversion rate register value */
+ u8 resolution; /* temperature resolution in bit */
u16 alert_alarms; /* Which alarm bits trigger ALERT# */
/* Upper 8 bits for max6695/96 */
u8 max_convrate; /* Maximum conversion rate */
+ u8 reg_status2; /* 2nd status register (optional) */
u8 reg_local_ext; /* local extension register offset */
+ u8 reg_remote_ext; /* remote temperature low byte */
+ u8 faultqueue_mask; /* fault queue mask */
+ u8 faultqueue_depth; /* fault queue mask */
/* registers values */
- s8 temp8[TEMP8_REG_NUM];
- s16 temp11[TEMP11_REG_NUM];
+ u16 temp[TEMP_REG_NUM];
u8 temp_hyst;
- u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
+ u8 conalert;
+ u16 reported_alarms; /* alarms reported as sysfs/udev events */
+ u16 current_alarms; /* current alarms, reported by chip */
+ u16 alarms; /* alarms not yet reported to user */
};
/*
*/
/*
- * The ADM1032 supports PEC but not on write byte transactions, so we need
+ * If the chip supports PEC but not on write byte transactions, we need
* to explicitly ask for a transaction without PEC.
*/
-static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
+static inline s32 lm90_write_no_pec(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter, client->addr,
client->flags & ~I2C_CLIENT_PEC,
/*
* It is assumed that client->update_lock is held (unless we are in
- * detection or initialization steps). This matters when PEC is enabled,
- * because we don't want the address pointer to change between the write
- * byte and the read byte transactions.
+ * detection or initialization steps). This matters when PEC is enabled
+ * for chips with partial PEC support, because we don't want the address
+ * pointer to change between the write byte and the read byte transactions.
*/
static int lm90_read_reg(struct i2c_client *client, u8 reg)
{
+ struct lm90_data *data = i2c_get_clientdata(client);
+ bool partial_pec = (client->flags & I2C_CLIENT_PEC) &&
+ (data->flags & LM90_HAVE_PARTIAL_PEC);
int err;
- if (client->flags & I2C_CLIENT_PEC) {
- err = adm1032_write_byte(client, reg);
- if (err >= 0)
- err = i2c_smbus_read_byte(client);
- } else
- err = i2c_smbus_read_byte_data(client, reg);
+ if (partial_pec) {
+ err = lm90_write_no_pec(client, reg);
+ if (err)
+ return err;
+ return i2c_smbus_read_byte(client);
+ }
+ return i2c_smbus_read_byte_data(client, reg);
+}
- return err;
+/*
+ * Return register write address
+ *
+ * The write address for registers 0x03 .. 0x08 is the read address plus 6.
+ * For other registers the write address matches the read address.
+ */
+static u8 lm90_write_reg_addr(u8 reg)
+{
+ if (reg >= LM90_REG_CONFIG1 && reg <= LM90_REG_REMOTE_LOWH)
+ return reg + 6;
+ return reg;
+}
+
+/*
+ * Write into LM90 register.
+ * Convert register address to write address if needed, then execute the
+ * operation.
+ */
+static int lm90_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, lm90_write_reg_addr(reg), val);
+}
+
+/*
+ * Write into 16-bit LM90 register.
+ * Convert register addresses to write address if needed, then execute the
+ * operation.
+ */
+static int lm90_write16(struct i2c_client *client, u8 regh, u8 regl, u16 val)
+{
+ int ret;
+
+ ret = lm90_write_reg(client, regh, val >> 8);
+ if (ret < 0 || !regl)
+ return ret;
+ return lm90_write_reg(client, regl, val & 0xff);
}
-static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl)
+static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl,
+ bool is_volatile)
{
int oldh, newh, l;
- /*
- * There is a trick here. We have to read two registers to have the
- * sensor temperature, but we have to beware a conversion could occur
- * between the readings. The datasheet says we should either use
- * the one-shot conversion register, which we don't want to do
- * (disables hardware monitoring) or monitor the busy bit, which is
- * impossible (we can't read the values and monitor that bit at the
- * exact same time). So the solution used here is to read the high
- * byte once, then the low byte, then the high byte again. If the new
- * high byte matches the old one, then we have a valid reading. Else
- * we have to read the low byte again, and now we believe we have a
- * correct reading.
- */
oldh = lm90_read_reg(client, regh);
if (oldh < 0)
return oldh;
+
+ if (!regl)
+ return oldh << 8;
+
l = lm90_read_reg(client, regl);
if (l < 0)
return l;
+
+ if (!is_volatile)
+ return (oldh << 8) | l;
+
+ /*
+ * For volatile registers we have to use a trick.
+ * We have to read two registers to have the sensor temperature,
+ * but we have to beware a conversion could occur between the
+ * readings. The datasheet says we should either use
+ * the one-shot conversion register, which we don't want to do
+ * (disables hardware monitoring) or monitor the busy bit, which is
+ * impossible (we can't read the values and monitor that bit at the
+ * exact same time). So the solution used here is to read the high
+ * the high byte again. If the new high byte matches the old one,
+ * then we have a valid reading. Otherwise we have to read the low
+ * byte again, and now we believe we have a correct reading.
+ */
newh = lm90_read_reg(client, regh);
if (newh < 0)
return newh;
if (data->config != config) {
int err;
- err = i2c_smbus_write_byte_data(data->client,
- LM90_REG_W_CONFIG1,
- config);
+ err = lm90_write_reg(data->client, LM90_REG_CONFIG1, config);
if (err)
return err;
data->config = config;
* various registers have different meanings as a result of selecting a
* non-default remote channel.
*/
-static int lm90_select_remote_channel(struct lm90_data *data, int channel)
+static int lm90_select_remote_channel(struct lm90_data *data, bool second)
{
- int err = 0;
+ u8 config = data->config & ~0x08;
- if (data->kind == max6696) {
- u8 config = data->config & ~0x08;
+ if (second)
+ config |= 0x08;
- if (channel)
- config |= 0x08;
- err = lm90_update_confreg(data, config);
- }
- return err;
+ return lm90_update_confreg(data, config);
}
static int lm90_write_convrate(struct lm90_data *data, int val)
}
/* Set conv rate */
- err = i2c_smbus_write_byte_data(data->client, LM90_REG_W_CONVRATE, val);
+ err = lm90_write_reg(data->client, LM90_REG_CONVRATE, val);
/* Revert change to config */
lm90_update_confreg(data, config);
return err;
}
+static int lm90_set_faultqueue(struct i2c_client *client,
+ struct lm90_data *data, int val)
+{
+ int err;
+
+ if (data->faultqueue_mask) {
+ err = lm90_update_confreg(data, val <= data->faultqueue_depth / 2 ?
+ data->config & ~data->faultqueue_mask :
+ data->config | data->faultqueue_mask);
+ } else {
+ static const u8 values[4] = {0, 2, 6, 0x0e};
+
+ data->conalert = (data->conalert & 0xf1) | values[val - 1];
+ err = lm90_write_reg(data->client, TMP451_REG_CONALERT,
+ data->conalert);
+ }
+
+ return err;
+}
+
static int lm90_update_limits(struct device *dev)
{
struct lm90_data *data = dev_get_drvdata(dev);
int val;
if (data->flags & LM90_HAVE_CRIT) {
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT);
+ val = lm90_read_reg(client, LM90_REG_LOCAL_CRIT);
if (val < 0)
return val;
- data->temp8[LOCAL_CRIT] = val;
+ data->temp[LOCAL_CRIT] = val << 8;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
+ val = lm90_read_reg(client, LM90_REG_REMOTE_CRIT);
if (val < 0)
return val;
- data->temp8[REMOTE_CRIT] = val;
+ data->temp[REMOTE_CRIT] = val << 8;
- val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST);
+ val = lm90_read_reg(client, LM90_REG_TCRIT_HYST);
if (val < 0)
return val;
data->temp_hyst = val;
}
-
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH);
- if (val < 0)
- return val;
- data->temp11[REMOTE_LOW] = val << 8;
-
- if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL);
+ if ((data->flags & LM90_HAVE_FAULTQUEUE) && !data->faultqueue_mask) {
+ val = lm90_read_reg(client, TMP451_REG_CONALERT);
if (val < 0)
return val;
- data->temp11[REMOTE_LOW] |= val;
+ data->conalert = val;
}
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH);
+ val = lm90_read16(client, LM90_REG_REMOTE_LOWH,
+ (data->flags & LM90_HAVE_REM_LIMIT_EXT) ? LM90_REG_REMOTE_LOWL : 0,
+ false);
if (val < 0)
return val;
- data->temp11[REMOTE_HIGH] = val << 8;
+ data->temp[REMOTE_LOW] = val;
- if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL);
- if (val < 0)
- return val;
- data->temp11[REMOTE_HIGH] |= val;
- }
+ val = lm90_read16(client, LM90_REG_REMOTE_HIGHH,
+ (data->flags & LM90_HAVE_REM_LIMIT_EXT) ? LM90_REG_REMOTE_HIGHL : 0,
+ false);
+ if (val < 0)
+ return val;
+ data->temp[REMOTE_HIGH] = val;
if (data->flags & LM90_HAVE_OFFSET) {
- val = lm90_read16(client, LM90_REG_R_REMOTE_OFFSH,
- LM90_REG_R_REMOTE_OFFSL);
+ val = lm90_read16(client, LM90_REG_REMOTE_OFFSH,
+ LM90_REG_REMOTE_OFFSL, false);
if (val < 0)
return val;
- data->temp11[REMOTE_OFFSET] = val;
+ data->temp[REMOTE_OFFSET] = val;
}
if (data->flags & LM90_HAVE_EMERGENCY) {
- val = lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG);
+ val = lm90_read_reg(client, MAX6659_REG_LOCAL_EMERG);
if (val < 0)
return val;
- data->temp8[LOCAL_EMERG] = val;
+ data->temp[LOCAL_EMERG] = val << 8;
- val = lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG);
+ val = lm90_read_reg(client, MAX6659_REG_REMOTE_EMERG);
if (val < 0)
return val;
- data->temp8[REMOTE_EMERG] = val;
+ data->temp[REMOTE_EMERG] = val << 8;
}
- if (data->kind == max6696) {
- val = lm90_select_remote_channel(data, 1);
+ if (data->flags & LM90_HAVE_TEMP3) {
+ val = lm90_select_remote_channel(data, true);
if (val < 0)
return val;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
+ val = lm90_read_reg(client, LM90_REG_REMOTE_CRIT);
if (val < 0)
return val;
- data->temp8[REMOTE2_CRIT] = val;
+ data->temp[REMOTE2_CRIT] = val << 8;
+
+ if (data->flags & LM90_HAVE_EMERGENCY) {
+ val = lm90_read_reg(client, MAX6659_REG_REMOTE_EMERG);
+ if (val < 0)
+ return val;
+ data->temp[REMOTE2_EMERG] = val << 8;
+ }
- val = lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG);
+ val = lm90_read_reg(client, LM90_REG_REMOTE_LOWH);
if (val < 0)
return val;
- data->temp8[REMOTE2_EMERG] = val;
+ data->temp[REMOTE2_LOW] = val << 8;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH);
+ val = lm90_read_reg(client, LM90_REG_REMOTE_HIGHH);
if (val < 0)
return val;
- data->temp11[REMOTE2_LOW] = val << 8;
+ data->temp[REMOTE2_HIGH] = val << 8;
+
+ if (data->flags & LM90_HAVE_OFFSET) {
+ val = lm90_read16(client, LM90_REG_REMOTE_OFFSH,
+ LM90_REG_REMOTE_OFFSL, false);
+ if (val < 0)
+ return val;
+ data->temp[REMOTE2_OFFSET] = val;
+ }
+
+ lm90_select_remote_channel(data, false);
+ }
+
+ return 0;
+}
+
+static void lm90_report_alarms(struct work_struct *work)
+{
+ struct lm90_data *data = container_of(work, struct lm90_data, report_work);
+ u16 cleared_alarms, new_alarms, current_alarms;
+ struct device *hwmon_dev = data->hwmon_dev;
+ struct device *dev = &data->client->dev;
+ int st, st2;
+
+ current_alarms = data->current_alarms;
+ cleared_alarms = data->reported_alarms & ~current_alarms;
+ new_alarms = current_alarms & ~data->reported_alarms;
+
+ if (!cleared_alarms && !new_alarms)
+ return;
+
+ st = new_alarms & 0xff;
+ st2 = new_alarms >> 8;
+
+ if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
+ (st2 & MAX6696_STATUS2_LOT2))
+ dev_dbg(dev, "temp%d out of range, please check!\n", 1);
+ if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
+ (st2 & MAX6696_STATUS2_ROT2))
+ dev_dbg(dev, "temp%d out of range, please check!\n", 2);
+ if (st & LM90_STATUS_ROPEN)
+ dev_dbg(dev, "temp%d diode open, please check!\n", 2);
+ if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
+ MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
+ dev_dbg(dev, "temp%d out of range, please check!\n", 3);
+ if (st2 & MAX6696_STATUS2_R2OPEN)
+ dev_dbg(dev, "temp%d diode open, please check!\n", 3);
+
+ st |= cleared_alarms & 0xff;
+ st2 |= cleared_alarms >> 8;
+
+ if (st & LM90_STATUS_LLOW)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_min_alarm, 0);
+ if (st & LM90_STATUS_RLOW)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_min_alarm, 1);
+ if (st2 & MAX6696_STATUS2_R2LOW)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_min_alarm, 2);
+
+ if (st & LM90_STATUS_LHIGH)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_max_alarm, 0);
+ if (st & LM90_STATUS_RHIGH)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_max_alarm, 1);
+ if (st2 & MAX6696_STATUS2_R2HIGH)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_max_alarm, 2);
+
+ if (st & LM90_STATUS_LTHRM)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_crit_alarm, 0);
+ if (st & LM90_STATUS_RTHRM)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_crit_alarm, 1);
+ if (st2 & MAX6696_STATUS2_R2THRM)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_crit_alarm, 2);
+
+ if (st2 & MAX6696_STATUS2_LOT2)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_emergency_alarm, 0);
+ if (st2 & MAX6696_STATUS2_ROT2)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_emergency_alarm, 1);
+ if (st2 & MAX6696_STATUS2_R2OT2)
+ hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_emergency_alarm, 2);
+
+ data->reported_alarms = current_alarms;
+}
+
+static int lm90_update_alarms_locked(struct lm90_data *data, bool force)
+{
+ if (force || !data->alarms_valid ||
+ time_after(jiffies, data->alarms_updated + msecs_to_jiffies(data->update_interval))) {
+ struct i2c_client *client = data->client;
+ bool check_enable;
+ u16 alarms;
+ int val;
+
+ data->alarms_valid = false;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH);
+ val = lm90_read_reg(client, LM90_REG_STATUS);
if (val < 0)
return val;
- data->temp11[REMOTE2_HIGH] = val << 8;
+ alarms = val & ~LM90_STATUS_BUSY;
- lm90_select_remote_channel(data, 0);
- }
+ if (data->reg_status2) {
+ val = lm90_read_reg(client, data->reg_status2);
+ if (val < 0)
+ return val;
+ alarms |= val << 8;
+ }
+ /*
+ * If the update is forced (called from interrupt or alert
+ * handler) and alarm data is valid, the alarms may have been
+ * updated after the last update interval, and the status
+ * register may still be cleared. Only add additional alarms
+ * in this case. Alarms will be cleared later if appropriate.
+ */
+ if (force && data->alarms_valid)
+ data->current_alarms |= alarms;
+ else
+ data->current_alarms = alarms;
+ data->alarms |= alarms;
+
+ check_enable = (client->irq || !(data->config_orig & 0x80)) &&
+ (data->config & 0x80);
+ if (force || check_enable)
+ schedule_work(&data->report_work);
+
+ /*
+ * Re-enable ALERT# output if it was originally enabled, relevant
+ * alarms are all clear, and alerts are currently disabled.
+ * Otherwise (re)schedule worker if needed.
+ */
+ if (check_enable) {
+ if (!(data->current_alarms & data->alert_alarms)) {
+ dev_dbg(&client->dev, "Re-enabling ALERT#\n");
+ lm90_update_confreg(data, data->config & ~0x80);
+ /*
+ * We may have been called from the update handler.
+ * If so, the worker, if scheduled, is no longer
+ * needed. Cancel it. Don't synchronize because
+ * it may already be running.
+ */
+ cancel_delayed_work(&data->alert_work);
+ } else {
+ schedule_delayed_work(&data->alert_work,
+ max_t(int, HZ, msecs_to_jiffies(data->update_interval)));
+ }
+ }
+ data->alarms_updated = jiffies;
+ data->alarms_valid = true;
+ }
return 0;
}
+static int lm90_update_alarms(struct lm90_data *data, bool force)
+{
+ int err;
+
+ mutex_lock(&data->update_lock);
+ err = lm90_update_alarms_locked(data, force);
+ mutex_unlock(&data->update_lock);
+
+ return err;
+}
+
+static void lm90_alert_work(struct work_struct *__work)
+{
+ struct delayed_work *delayed_work = container_of(__work, struct delayed_work, work);
+ struct lm90_data *data = container_of(delayed_work, struct lm90_data, alert_work);
+
+ /* Nothing to do if alerts are enabled */
+ if (!(data->config & 0x80))
+ return;
+
+ lm90_update_alarms(data, true);
+}
+
static int lm90_update_device(struct device *dev)
{
struct lm90_data *data = dev_get_drvdata(dev);
data->valid = false;
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_LOW);
+ val = lm90_read_reg(client, LM90_REG_LOCAL_LOW);
if (val < 0)
return val;
- data->temp8[LOCAL_LOW] = val;
+ data->temp[LOCAL_LOW] = val << 8;
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH);
+ val = lm90_read_reg(client, LM90_REG_LOCAL_HIGH);
if (val < 0)
return val;
- data->temp8[LOCAL_HIGH] = val;
+ data->temp[LOCAL_HIGH] = val << 8;
- if (data->reg_local_ext) {
- val = lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
- data->reg_local_ext);
- if (val < 0)
- return val;
- data->temp11[LOCAL_TEMP] = val;
- } else {
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP);
- if (val < 0)
- return val;
- data->temp11[LOCAL_TEMP] = val << 8;
- }
- val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
- LM90_REG_R_REMOTE_TEMPL);
+ val = lm90_read16(client, LM90_REG_LOCAL_TEMP,
+ data->reg_local_ext, true);
if (val < 0)
return val;
- data->temp11[REMOTE_TEMP] = val;
-
- val = lm90_read_reg(client, LM90_REG_R_STATUS);
+ data->temp[LOCAL_TEMP] = val;
+ val = lm90_read16(client, LM90_REG_REMOTE_TEMPH,
+ data->reg_remote_ext, true);
if (val < 0)
return val;
- data->alarms = val & ~LM90_STATUS_BUSY;
+ data->temp[REMOTE_TEMP] = val;
- if (data->kind == max6696) {
- val = lm90_select_remote_channel(data, 1);
+ if (data->flags & LM90_HAVE_TEMP3) {
+ val = lm90_select_remote_channel(data, true);
if (val < 0)
return val;
- val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
- LM90_REG_R_REMOTE_TEMPL);
+ val = lm90_read16(client, LM90_REG_REMOTE_TEMPH,
+ data->reg_remote_ext, true);
if (val < 0) {
- lm90_select_remote_channel(data, 0);
+ lm90_select_remote_channel(data, false);
return val;
}
- data->temp11[REMOTE2_TEMP] = val;
+ data->temp[REMOTE2_TEMP] = val;
- lm90_select_remote_channel(data, 0);
-
- val = lm90_read_reg(client, MAX6696_REG_R_STATUS2);
- if (val < 0)
- return val;
- data->alarms |= val << 8;
+ lm90_select_remote_channel(data, false);
}
- /*
- * Re-enable ALERT# output if it was originally enabled and
- * relevant alarms are all clear
- */
- if ((client->irq || !(data->config_orig & 0x80)) &&
- !(data->alarms & data->alert_alarms)) {
- if (data->config & 0x80) {
- dev_dbg(&client->dev, "Re-enabling ALERT#\n");
- lm90_update_confreg(data, data->config & ~0x80);
- }
- }
+ val = lm90_update_alarms_locked(data, false);
+ if (val < 0)
+ return val;
data->last_updated = jiffies;
data->valid = true;
return 0;
}
-/*
- * Conversions
- * For local temperatures and limits, critical limits and the hysteresis
- * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
- * For remote temperatures and limits, it uses signed 11-bit values with
- * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. Some
- * Maxim chips use unsigned values.
- */
-
-static inline int temp_from_s8(s8 val)
+/* pec used for devices with PEC support */
+static ssize_t pec_show(struct device *dev, struct device_attribute *dummy,
+ char *buf)
{
- return val * 1000;
-}
+ struct i2c_client *client = to_i2c_client(dev);
-static inline int temp_from_u8(u8 val)
-{
- return val * 1000;
+ return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
}
-static inline int temp_from_s16(s16 val)
+static ssize_t pec_store(struct device *dev, struct device_attribute *dummy,
+ const char *buf, size_t count)
{
- return val / 32 * 125;
-}
+ struct i2c_client *client = to_i2c_client(dev);
+ long val;
+ int err;
-static inline int temp_from_u16(u16 val)
-{
- return val / 32 * 125;
-}
+ err = kstrtol(buf, 10, &val);
+ if (err < 0)
+ return err;
-static s8 temp_to_s8(long val)
-{
- if (val <= -128000)
- return -128;
- if (val >= 127000)
- return 127;
- if (val < 0)
- return (val - 500) / 1000;
- return (val + 500) / 1000;
-}
+ switch (val) {
+ case 0:
+ client->flags &= ~I2C_CLIENT_PEC;
+ break;
+ case 1:
+ client->flags |= I2C_CLIENT_PEC;
+ break;
+ default:
+ return -EINVAL;
+ }
-static u8 temp_to_u8(long val)
-{
- if (val <= 0)
- return 0;
- if (val >= 255000)
- return 255;
- return (val + 500) / 1000;
-}
-
-static s16 temp_to_s16(long val)
-{
- if (val <= -128000)
- return 0x8000;
- if (val >= 127875)
- return 0x7FE0;
- if (val < 0)
- return (val - 62) / 125 * 32;
- return (val + 62) / 125 * 32;
-}
-
-static u8 hyst_to_reg(long val)
-{
- if (val <= 0)
- return 0;
- if (val >= 30500)
- return 31;
- return (val + 500) / 1000;
-}
-
-/*
- * ADT7461 in compatibility mode is almost identical to LM90 except that
- * attempts to write values that are outside the range 0 < temp < 127 are
- * treated as the boundary value.
- *
- * ADT7461 in "extended mode" operation uses unsigned integers offset by
- * 64 (e.g., 0 -> -64 degC). The range is restricted to -64..191 degC.
- */
-static inline int temp_from_u8_adt7461(struct lm90_data *data, u8 val)
-{
- if (data->flags & LM90_FLAG_ADT7461_EXT)
- return (val - 64) * 1000;
- return temp_from_s8(val);
+ return count;
}
-static inline int temp_from_u16_adt7461(struct lm90_data *data, u16 val)
-{
- if (data->flags & LM90_FLAG_ADT7461_EXT)
- return (val - 0x4000) / 64 * 250;
- return temp_from_s16(val);
-}
+static DEVICE_ATTR_RW(pec);
-static u8 temp_to_u8_adt7461(struct lm90_data *data, long val)
+static int lm90_temp_get_resolution(struct lm90_data *data, int index)
{
- if (data->flags & LM90_FLAG_ADT7461_EXT) {
- if (val <= -64000)
- return 0;
- if (val >= 191000)
- return 0xFF;
- return (val + 500 + 64000) / 1000;
+ switch (index) {
+ case REMOTE_TEMP:
+ if (data->reg_remote_ext)
+ return data->resolution;
+ return 8;
+ case REMOTE_OFFSET:
+ case REMOTE2_OFFSET:
+ case REMOTE2_TEMP:
+ return data->resolution;
+ case LOCAL_TEMP:
+ if (data->reg_local_ext)
+ return data->resolution;
+ return 8;
+ case REMOTE_LOW:
+ case REMOTE_HIGH:
+ case REMOTE2_LOW:
+ case REMOTE2_HIGH:
+ if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
+ return data->resolution;
+ return 8;
+ default:
+ return 8;
}
- if (val <= 0)
- return 0;
- if (val >= 127000)
- return 127;
- return (val + 500) / 1000;
}
-static u16 temp_to_u16_adt7461(struct lm90_data *data, long val)
+static int lm90_temp_from_reg(u32 flags, u16 regval, u8 resolution)
{
- if (data->flags & LM90_FLAG_ADT7461_EXT) {
- if (val <= -64000)
- return 0;
- if (val >= 191750)
- return 0xFFC0;
- return (val + 64000 + 125) / 250 * 64;
- }
- if (val <= 0)
- return 0;
- if (val >= 127750)
- return 0x7FC0;
- return (val + 125) / 250 * 64;
-}
+ int val;
-/* pec used for ADM1032 only */
-static ssize_t pec_show(struct device *dev, struct device_attribute *dummy,
- char *buf)
-{
- struct i2c_client *client = to_i2c_client(dev);
+ if (flags & LM90_HAVE_EXTENDED_TEMP)
+ val = regval - 0x4000;
+ else if (flags & (LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_EXT_UNSIGNED))
+ val = regval;
+ else
+ val = (s16)regval;
- return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
+ return ((val >> (16 - resolution)) * 1000) >> (resolution - 8);
}
-static ssize_t pec_store(struct device *dev, struct device_attribute *dummy,
- const char *buf, size_t count)
+static int lm90_get_temp(struct lm90_data *data, int index, int channel)
{
- struct i2c_client *client = to_i2c_client(dev);
- long val;
- int err;
+ int temp = lm90_temp_from_reg(data->flags, data->temp[index],
+ lm90_temp_get_resolution(data, index));
- err = kstrtol(buf, 10, &val);
- if (err < 0)
- return err;
-
- switch (val) {
- case 0:
- client->flags &= ~I2C_CLIENT_PEC;
- break;
- case 1:
- client->flags |= I2C_CLIENT_PEC;
- break;
- default:
- return -EINVAL;
- }
+ /* +16 degrees offset for remote temperature on LM99 */
+ if (data->kind == lm99 && channel)
+ temp += 16000;
- return count;
+ return temp;
}
-static DEVICE_ATTR_RW(pec);
-
-static int lm90_get_temp11(struct lm90_data *data, int index)
+static u16 lm90_temp_to_reg(u32 flags, long val, u8 resolution)
{
- s16 temp11 = data->temp11[index];
- int temp;
-
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- temp = temp_from_u16_adt7461(data, temp11);
- else if (data->kind == max6646)
- temp = temp_from_u16(temp11);
- else
- temp = temp_from_s16(temp11);
-
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index <= 2)
- temp += 16000;
+ int fraction = resolution > 8 ?
+ 1000 - DIV_ROUND_CLOSEST(1000, BIT(resolution - 8)) : 0;
+
+ if (flags & LM90_HAVE_EXTENDED_TEMP) {
+ val = clamp_val(val, -64000, 191000 + fraction);
+ val += 64000;
+ } else if (flags & LM90_HAVE_EXT_UNSIGNED) {
+ val = clamp_val(val, 0, 255000 + fraction);
+ } else if (flags & LM90_HAVE_UNSIGNED_TEMP) {
+ val = clamp_val(val, 0, 127000 + fraction);
+ } else {
+ val = clamp_val(val, -128000, 127000 + fraction);
+ }
- return temp;
+ return DIV_ROUND_CLOSEST(val << (resolution - 8), 1000) << (16 - resolution);
}
-static int lm90_set_temp11(struct lm90_data *data, int index, long val)
+static int lm90_set_temp(struct lm90_data *data, int index, int channel, long val)
{
- static struct reg {
- u8 high;
- u8 low;
- } reg[] = {
- [REMOTE_LOW] = { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL },
- [REMOTE_HIGH] = { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL },
- [REMOTE_OFFSET] = { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL },
- [REMOTE2_LOW] = { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL },
- [REMOTE2_HIGH] = { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL }
+ static const u8 regs[] = {
+ [LOCAL_LOW] = LM90_REG_LOCAL_LOW,
+ [LOCAL_HIGH] = LM90_REG_LOCAL_HIGH,
+ [LOCAL_CRIT] = LM90_REG_LOCAL_CRIT,
+ [REMOTE_CRIT] = LM90_REG_REMOTE_CRIT,
+ [LOCAL_EMERG] = MAX6659_REG_LOCAL_EMERG,
+ [REMOTE_EMERG] = MAX6659_REG_REMOTE_EMERG,
+ [REMOTE2_CRIT] = LM90_REG_REMOTE_CRIT,
+ [REMOTE2_EMERG] = MAX6659_REG_REMOTE_EMERG,
+ [REMOTE_LOW] = LM90_REG_REMOTE_LOWH,
+ [REMOTE_HIGH] = LM90_REG_REMOTE_HIGHH,
+ [REMOTE2_LOW] = LM90_REG_REMOTE_LOWH,
+ [REMOTE2_HIGH] = LM90_REG_REMOTE_HIGHH,
};
struct i2c_client *client = data->client;
- struct reg *regp = ®[index];
+ u8 regh = regs[index];
+ u8 regl = 0;
int err;
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index <= 2) {
+ if (channel && (data->flags & LM90_HAVE_REM_LIMIT_EXT)) {
+ if (index == REMOTE_LOW || index == REMOTE2_LOW)
+ regl = LM90_REG_REMOTE_LOWL;
+ else if (index == REMOTE_HIGH || index == REMOTE2_HIGH)
+ regl = LM90_REG_REMOTE_HIGHL;
+ }
+
+ /* +16 degrees offset for remote temperature on LM99 */
+ if (data->kind == lm99 && channel) {
/* prevent integer underflow */
val = max(val, -128000l);
val -= 16000;
}
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- data->temp11[index] = temp_to_u16_adt7461(data, val);
- else if (data->kind == max6646)
- data->temp11[index] = temp_to_u8(val) << 8;
- else if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
- data->temp11[index] = temp_to_s16(val);
- else
- data->temp11[index] = temp_to_s8(val) << 8;
+ data->temp[index] = lm90_temp_to_reg(data->flags, val,
+ lm90_temp_get_resolution(data, index));
- lm90_select_remote_channel(data, index >= 3);
- err = i2c_smbus_write_byte_data(client, regp->high,
- data->temp11[index] >> 8);
- if (err < 0)
- return err;
- if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
- err = i2c_smbus_write_byte_data(client, regp->low,
- data->temp11[index] & 0xff);
+ if (channel > 1)
+ lm90_select_remote_channel(data, true);
+
+ err = lm90_write16(client, regh, regl, data->temp[index]);
+
+ if (channel > 1)
+ lm90_select_remote_channel(data, false);
- lm90_select_remote_channel(data, 0);
return err;
}
-static int lm90_get_temp8(struct lm90_data *data, int index)
+static int lm90_get_temphyst(struct lm90_data *data, int index, int channel)
{
- s8 temp8 = data->temp8[index];
- int temp;
+ int temp = lm90_get_temp(data, index, channel);
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- temp = temp_from_u8_adt7461(data, temp8);
- else if (data->kind == max6646)
- temp = temp_from_u8(temp8);
- else
- temp = temp_from_s8(temp8);
-
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index == 3)
- temp += 16000;
-
- return temp;
+ return temp - data->temp_hyst * 1000;
}
-static int lm90_set_temp8(struct lm90_data *data, int index, long val)
+static int lm90_set_temphyst(struct lm90_data *data, long val)
{
- static const u8 reg[TEMP8_REG_NUM] = {
- LM90_REG_W_LOCAL_LOW,
- LM90_REG_W_LOCAL_HIGH,
- LM90_REG_W_LOCAL_CRIT,
- LM90_REG_W_REMOTE_CRIT,
- MAX6659_REG_W_LOCAL_EMERG,
- MAX6659_REG_W_REMOTE_EMERG,
- LM90_REG_W_REMOTE_CRIT,
- MAX6659_REG_W_REMOTE_EMERG,
- };
- struct i2c_client *client = data->client;
- int err;
+ int temp = lm90_get_temp(data, LOCAL_CRIT, 0);
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index == 3) {
- /* prevent integer underflow */
- val = max(val, -128000l);
- val -= 16000;
- }
+ /* prevent integer overflow/underflow */
+ val = clamp_val(val, -128000l, 255000l);
+ data->temp_hyst = clamp_val(DIV_ROUND_CLOSEST(temp - val, 1000), 0, 31);
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- data->temp8[index] = temp_to_u8_adt7461(data, val);
- else if (data->kind == max6646)
- data->temp8[index] = temp_to_u8(val);
- else
- data->temp8[index] = temp_to_s8(val);
+ return lm90_write_reg(data->client, LM90_REG_TCRIT_HYST, data->temp_hyst);
+}
- lm90_select_remote_channel(data, index >= 6);
- err = i2c_smbus_write_byte_data(client, reg[index], data->temp8[index]);
- lm90_select_remote_channel(data, 0);
+static int lm90_get_temp_offset(struct lm90_data *data, int index)
+{
+ int res = lm90_temp_get_resolution(data, index);
- return err;
+ return lm90_temp_from_reg(0, data->temp[index], res);
}
-static int lm90_get_temphyst(struct lm90_data *data, int index)
+static int lm90_set_temp_offset(struct lm90_data *data, int index, int channel, long val)
{
- int temp;
+ int err;
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- temp = temp_from_u8_adt7461(data, data->temp8[index]);
- else if (data->kind == max6646)
- temp = temp_from_u8(data->temp8[index]);
- else
- temp = temp_from_s8(data->temp8[index]);
+ val = lm90_temp_to_reg(0, val, lm90_temp_get_resolution(data, index));
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index == 3)
- temp += 16000;
+ /* For ADT7481 we can use the same registers for remote channel 1 and 2 */
+ if (channel > 1)
+ lm90_select_remote_channel(data, true);
- return temp - temp_from_s8(data->temp_hyst);
-}
+ err = lm90_write16(data->client, LM90_REG_REMOTE_OFFSH, LM90_REG_REMOTE_OFFSL, val);
-static int lm90_set_temphyst(struct lm90_data *data, long val)
-{
- struct i2c_client *client = data->client;
- int temp;
- int err;
+ if (channel > 1)
+ lm90_select_remote_channel(data, false);
- if (data->flags & LM90_HAVE_EXTENDED_TEMP)
- temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]);
- else if (data->kind == max6646)
- temp = temp_from_u8(data->temp8[LOCAL_CRIT]);
- else
- temp = temp_from_s8(data->temp8[LOCAL_CRIT]);
+ if (err)
+ return err;
- /* prevent integer overflow/underflow */
- val = clamp_val(val, -128000l, 255000l);
+ data->temp[index] = val;
- data->temp_hyst = hyst_to_reg(temp - val);
- err = i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
- data->temp_hyst);
- return err;
+ return 0;
}
-static const u8 lm90_temp_index[3] = {
+static const u8 lm90_temp_index[MAX_CHANNELS] = {
LOCAL_TEMP, REMOTE_TEMP, REMOTE2_TEMP
};
-static const u8 lm90_temp_min_index[3] = {
+static const u8 lm90_temp_min_index[MAX_CHANNELS] = {
LOCAL_LOW, REMOTE_LOW, REMOTE2_LOW
};
-static const u8 lm90_temp_max_index[3] = {
+static const u8 lm90_temp_max_index[MAX_CHANNELS] = {
LOCAL_HIGH, REMOTE_HIGH, REMOTE2_HIGH
};
-static const u8 lm90_temp_crit_index[3] = {
+static const u8 lm90_temp_crit_index[MAX_CHANNELS] = {
LOCAL_CRIT, REMOTE_CRIT, REMOTE2_CRIT
};
-static const u8 lm90_temp_emerg_index[3] = {
+static const u8 lm90_temp_emerg_index[MAX_CHANNELS] = {
LOCAL_EMERG, REMOTE_EMERG, REMOTE2_EMERG
};
-static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 };
-static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 };
-static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 };
-static const u8 lm90_crit_alarm_bits_swapped[3] = { 1, 0, 9 };
-static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 };
-static const u8 lm90_fault_bits[3] = { 0, 2, 10 };
+static const s8 lm90_temp_offset_index[MAX_CHANNELS] = {
+ -1, REMOTE_OFFSET, REMOTE2_OFFSET
+};
+
+static const u16 lm90_min_alarm_bits[MAX_CHANNELS] = { BIT(5), BIT(3), BIT(11) };
+static const u16 lm90_max_alarm_bits[MAX_CHANNELS] = { BIT(6), BIT(4), BIT(12) };
+static const u16 lm90_crit_alarm_bits[MAX_CHANNELS] = { BIT(0), BIT(1), BIT(9) };
+static const u16 lm90_crit_alarm_bits_swapped[MAX_CHANNELS] = { BIT(1), BIT(0), BIT(9) };
+static const u16 lm90_emergency_alarm_bits[MAX_CHANNELS] = { BIT(15), BIT(13), BIT(14) };
+static const u16 lm90_fault_bits[MAX_CHANNELS] = { BIT(0), BIT(2), BIT(10) };
static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val)
{
struct lm90_data *data = dev_get_drvdata(dev);
int err;
+ u16 bit;
mutex_lock(&data->update_lock);
err = lm90_update_device(dev);
switch (attr) {
case hwmon_temp_input:
- *val = lm90_get_temp11(data, lm90_temp_index[channel]);
+ *val = lm90_get_temp(data, lm90_temp_index[channel], channel);
break;
case hwmon_temp_min_alarm:
- *val = (data->alarms >> lm90_min_alarm_bits[channel]) & 1;
- break;
case hwmon_temp_max_alarm:
- *val = (data->alarms >> lm90_max_alarm_bits[channel]) & 1;
- break;
case hwmon_temp_crit_alarm:
- if (data->flags & LM90_HAVE_CRIT_ALRM_SWP)
- *val = (data->alarms >> lm90_crit_alarm_bits_swapped[channel]) & 1;
- else
- *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1;
- break;
case hwmon_temp_emergency_alarm:
- *val = (data->alarms >> lm90_emergency_alarm_bits[channel]) & 1;
- break;
case hwmon_temp_fault:
- *val = (data->alarms >> lm90_fault_bits[channel]) & 1;
+ switch (attr) {
+ case hwmon_temp_min_alarm:
+ bit = lm90_min_alarm_bits[channel];
+ break;
+ case hwmon_temp_max_alarm:
+ bit = lm90_max_alarm_bits[channel];
+ break;
+ case hwmon_temp_crit_alarm:
+ if (data->flags & LM90_HAVE_CRIT_ALRM_SWP)
+ bit = lm90_crit_alarm_bits_swapped[channel];
+ else
+ bit = lm90_crit_alarm_bits[channel];
+ break;
+ case hwmon_temp_emergency_alarm:
+ bit = lm90_emergency_alarm_bits[channel];
+ break;
+ case hwmon_temp_fault:
+ bit = lm90_fault_bits[channel];
+ break;
+ }
+ *val = !!(data->alarms & bit);
+ data->alarms &= ~bit;
+ data->alarms |= data->current_alarms;
break;
case hwmon_temp_min:
- if (channel == 0)
- *val = lm90_get_temp8(data,
- lm90_temp_min_index[channel]);
- else
- *val = lm90_get_temp11(data,
- lm90_temp_min_index[channel]);
+ *val = lm90_get_temp(data, lm90_temp_min_index[channel], channel);
break;
case hwmon_temp_max:
- if (channel == 0)
- *val = lm90_get_temp8(data,
- lm90_temp_max_index[channel]);
- else
- *val = lm90_get_temp11(data,
- lm90_temp_max_index[channel]);
+ *val = lm90_get_temp(data, lm90_temp_max_index[channel], channel);
break;
case hwmon_temp_crit:
- *val = lm90_get_temp8(data, lm90_temp_crit_index[channel]);
+ *val = lm90_get_temp(data, lm90_temp_crit_index[channel], channel);
break;
case hwmon_temp_crit_hyst:
- *val = lm90_get_temphyst(data, lm90_temp_crit_index[channel]);
+ *val = lm90_get_temphyst(data, lm90_temp_crit_index[channel], channel);
break;
case hwmon_temp_emergency:
- *val = lm90_get_temp8(data, lm90_temp_emerg_index[channel]);
+ *val = lm90_get_temp(data, lm90_temp_emerg_index[channel], channel);
break;
case hwmon_temp_emergency_hyst:
- *val = lm90_get_temphyst(data, lm90_temp_emerg_index[channel]);
+ *val = lm90_get_temphyst(data, lm90_temp_emerg_index[channel], channel);
break;
case hwmon_temp_offset:
- *val = lm90_get_temp11(data, REMOTE_OFFSET);
+ *val = lm90_get_temp_offset(data, lm90_temp_offset_index[channel]);
break;
default:
return -EOPNOTSUPP;
switch (attr) {
case hwmon_temp_min:
- if (channel == 0)
- err = lm90_set_temp8(data,
- lm90_temp_min_index[channel],
- val);
- else
- err = lm90_set_temp11(data,
- lm90_temp_min_index[channel],
- val);
+ err = lm90_set_temp(data, lm90_temp_min_index[channel],
+ channel, val);
break;
case hwmon_temp_max:
- if (channel == 0)
- err = lm90_set_temp8(data,
- lm90_temp_max_index[channel],
- val);
- else
- err = lm90_set_temp11(data,
- lm90_temp_max_index[channel],
- val);
+ err = lm90_set_temp(data, lm90_temp_max_index[channel],
+ channel, val);
break;
case hwmon_temp_crit:
- err = lm90_set_temp8(data, lm90_temp_crit_index[channel], val);
+ err = lm90_set_temp(data, lm90_temp_crit_index[channel],
+ channel, val);
break;
case hwmon_temp_crit_hyst:
err = lm90_set_temphyst(data, val);
break;
case hwmon_temp_emergency:
- err = lm90_set_temp8(data, lm90_temp_emerg_index[channel], val);
+ err = lm90_set_temp(data, lm90_temp_emerg_index[channel],
+ channel, val);
break;
case hwmon_temp_offset:
- err = lm90_set_temp11(data, REMOTE_OFFSET, val);
+ err = lm90_set_temp_offset(data, lm90_temp_offset_index[channel],
+ channel, val);
break;
default:
err = -EOPNOTSUPP;
case hwmon_temp_emergency_alarm:
case hwmon_temp_emergency_hyst:
case hwmon_temp_fault:
+ case hwmon_temp_label:
return 0444;
case hwmon_temp_min:
case hwmon_temp_max:
case hwmon_chip_alarms:
*val = data->alarms;
break;
+ case hwmon_chip_temp_samples:
+ if (data->faultqueue_mask) {
+ *val = (data->config & data->faultqueue_mask) ?
+ data->faultqueue_depth : 1;
+ } else {
+ switch (data->conalert & 0x0e) {
+ case 0x0:
+ default:
+ *val = 1;
+ break;
+ case 0x2:
+ *val = 2;
+ break;
+ case 0x6:
+ *val = 3;
+ break;
+ case 0xe:
+ *val = 4;
+ break;
+ }
+ }
+ break;
default:
return -EOPNOTSUPP;
}
err = lm90_set_convrate(client, data,
clamp_val(val, 0, 100000));
break;
+ case hwmon_chip_temp_samples:
+ err = lm90_set_faultqueue(client, data, clamp_val(val, 1, 4));
+ break;
default:
err = -EOPNOTSUPP;
break;
{
switch (attr) {
case hwmon_chip_update_interval:
+ case hwmon_chip_temp_samples:
return 0644;
case hwmon_chip_alarms:
return 0444;
}
}
+static int lm90_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct lm90_data *data = dev_get_drvdata(dev);
+
+ *str = data->channel_label[channel];
+
+ return 0;
+}
+
static int lm90_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
}
}
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm90_detect(struct i2c_client *client,
- struct i2c_board_info *info)
+static const char *lm90_detect_lm84(struct i2c_client *client)
{
- struct i2c_adapter *adapter = client->adapter;
+ static const u8 regs[] = {
+ LM90_REG_STATUS, LM90_REG_LOCAL_TEMP, LM90_REG_LOCAL_HIGH,
+ LM90_REG_REMOTE_TEMPH, LM90_REG_REMOTE_HIGHH
+ };
+ int status = i2c_smbus_read_byte_data(client, LM90_REG_STATUS);
+ int reg1, reg2, reg3, reg4;
+ bool nonzero = false;
+ u8 ff = 0xff;
+ int i;
+
+ if (status < 0 || (status & 0xab))
+ return NULL;
+
+ /*
+ * For LM84, undefined registers return the most recent value.
+ * Repeat several times, each time checking against a different
+ * (presumably) existing register.
+ */
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ reg1 = i2c_smbus_read_byte_data(client, regs[i]);
+ reg2 = i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_TEMPL);
+ reg3 = i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_LOW);
+ reg4 = i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_LOWH);
+
+ if (reg1 < 0)
+ return NULL;
+
+ /* If any register has a different value, this is not an LM84 */
+ if (reg2 != reg1 || reg3 != reg1 || reg4 != reg1)
+ return NULL;
+
+ nonzero |= reg1 || reg2 || reg3 || reg4;
+ ff &= reg1;
+ }
+ /*
+ * If all registers always returned 0 or 0xff, all bets are off,
+ * and we can not make any predictions about the chip type.
+ */
+ return nonzero && ff != 0xff ? "lm84" : NULL;
+}
+
+static const char *lm90_detect_max1617(struct i2c_client *client, int config1)
+{
+ int status = i2c_smbus_read_byte_data(client, LM90_REG_STATUS);
+ int llo, rlo, lhi, rhi;
+
+ if (status < 0 || (status & 0x03))
+ return NULL;
+
+ if (config1 & 0x3f)
+ return NULL;
+
+ /*
+ * Fail if unsupported registers return anything but 0xff.
+ * The calling code already checked man_id and chip_id.
+ * A byte read operation repeats the most recent read operation
+ * and should also return 0xff.
+ */
+ if (i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_TEMPL) != 0xff ||
+ i2c_smbus_read_byte_data(client, MAX6657_REG_LOCAL_TEMPL) != 0xff ||
+ i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_LOWL) != 0xff ||
+ i2c_smbus_read_byte(client) != 0xff)
+ return NULL;
+
+ llo = i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_LOW);
+ rlo = i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_LOWH);
+
+ lhi = i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_HIGH);
+ rhi = i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_HIGHH);
+
+ if (llo < 0 || rlo < 0)
+ return NULL;
+
+ /*
+ * A byte read operation repeats the most recent read and should
+ * return the same value.
+ */
+ if (i2c_smbus_read_byte(client) != rhi)
+ return NULL;
+
+ /*
+ * The following two checks are marginal since the checked values
+ * are strictly speaking valid.
+ */
+
+ /* fail for negative high limits; this also catches read errors */
+ if ((s8)lhi < 0 || (s8)rhi < 0)
+ return NULL;
+
+ /* fail if low limits are larger than or equal to high limits */
+ if ((s8)llo >= lhi || (s8)rlo >= rhi)
+ return NULL;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
+ /*
+ * Word read operations return 0xff in second byte
+ */
+ if (i2c_smbus_read_word_data(client, LM90_REG_REMOTE_TEMPL) !=
+ 0xffff)
+ return NULL;
+ if (i2c_smbus_read_word_data(client, LM90_REG_CONFIG1) !=
+ (config1 | 0xff00))
+ return NULL;
+ if (i2c_smbus_read_word_data(client, LM90_REG_LOCAL_HIGH) !=
+ (lhi | 0xff00))
+ return NULL;
+ }
+
+ return "max1617";
+}
+
+static const char *lm90_detect_national(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
int address = client->addr;
const char *name = NULL;
- int man_id, chip_id, config1, config2, convrate;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
+ if (config2 < 0)
+ return NULL;
- /* detection and identification */
- man_id = i2c_smbus_read_byte_data(client, LM90_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, LM90_REG_R_CHIP_ID);
- config1 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
- convrate = i2c_smbus_read_byte_data(client, LM90_REG_R_CONVRATE);
- if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
- return -ENODEV;
+ if ((config1 & 0x2a) || (config2 & 0xf8) || convrate > 0x09)
+ return NULL;
- if (man_id == 0x01 || man_id == 0x5C || man_id == 0xA1) {
- config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2);
- if (config2 < 0)
- return -ENODEV;
+ if (address != 0x4c && address != 0x4d)
+ return NULL;
+
+ switch (chip_id & 0xf0) {
+ case 0x10: /* LM86 */
+ if (address == 0x4c)
+ name = "lm86";
+ break;
+ case 0x20: /* LM90 */
+ if (address == 0x4c)
+ name = "lm90";
+ break;
+ case 0x30: /* LM89/LM99 */
+ name = "lm99"; /* detect LM89 as LM99 */
+ break;
+ default:
+ break;
}
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x01) { /* National Semiconductor */
- if ((config1 & 0x2A) == 0x00
- && (config2 & 0xF8) == 0x00
- && convrate <= 0x09) {
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x20) { /* LM90 */
- name = "lm90";
- } else
- if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
- name = "lm99";
- dev_info(&adapter->dev,
- "Assuming LM99 chip at 0x%02x\n",
- address);
- dev_info(&adapter->dev,
- "If it is an LM89, instantiate it "
- "with the new_device sysfs "
- "interface\n");
- } else
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x10) { /* LM86 */
- name = "lm86";
- }
- }
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
- && (config1 & 0x3F) == 0x00
- && convrate <= 0x0A) {
+ return name;
+}
+
+static const char *lm90_detect_on(struct i2c_client *client, int chip_id, int config1,
+ int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+
+ switch (chip_id) {
+ case 0xca: /* NCT218 */
+ if ((address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
+ name = "nct218";
+ break;
+ default:
+ break;
+ }
+ return name;
+}
+
+static const char *lm90_detect_analog(struct i2c_client *client, bool common_address,
+ int chip_id, int config1, int convrate)
+{
+ int status = i2c_smbus_read_byte_data(client, LM90_REG_STATUS);
+ int config2 = i2c_smbus_read_byte_data(client, ADT7481_REG_CONFIG2);
+ int man_id2 = i2c_smbus_read_byte_data(client, ADT7481_REG_MAN_ID);
+ int chip_id2 = i2c_smbus_read_byte_data(client, ADT7481_REG_CHIP_ID);
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (status < 0 || config2 < 0 || man_id2 < 0 || chip_id2 < 0)
+ return NULL;
+
+ /*
+ * The following chips should be detected by this function. Known
+ * register values are listed. Registers 0x3d .. 0x3e are undocumented
+ * for most of the chips, yet appear to return a well defined value.
+ * Register 0xff is undocumented for some of the chips. Register 0x3f
+ * is undocumented for all chips, but also returns a well defined value.
+ * Values are as reported from real chips unless mentioned otherwise.
+ * The code below checks values for registers 0x3d, 0x3e, and 0xff,
+ * but not for register 0x3f.
+ *
+ * Chip Register
+ * 3d 3e 3f fe ff Notes
+ * ----------------------------------------------------------
+ * adm1020 00 00 00 41 39
+ * adm1021 00 00 00 41 03
+ * adm1021a 00 00 00 41 3c
+ * adm1023 00 00 00 41 3c same as adm1021a
+ * adm1032 00 00 00 41 42
+ *
+ * adt7421 21 41 04 41 04
+ * adt7461 00 00 00 41 51
+ * adt7461a 61 41 05 41 57
+ * adt7481 81 41 02 41 62
+ * adt7482 - - - 41 65 datasheet
+ * 82 41 05 41 75 real chip
+ * adt7483 83 41 04 41 94
+ *
+ * nct72 61 41 07 41 55
+ * nct210 00 00 00 41 3f
+ * nct214 61 41 08 41 5a
+ * nct1008 - - - 41 57 datasheet rev. 3
+ * 61 41 06 41 54 real chip
+ *
+ * nvt210 - - - 41 - datasheet
+ * nvt211 - - - 41 - datasheet
+ */
+ switch (chip_id) {
+ case 0x00 ... 0x03: /* ADM1021 */
+ case 0x05 ... 0x0f:
+ if (man_id2 == 0x00 && chip_id2 == 0x00 && common_address &&
+ !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "adm1021";
+ break;
+ case 0x04: /* ADT7421 (undocumented) */
+ if (man_id2 == 0x41 && chip_id2 == 0x21 &&
+ (address == 0x4c || address == 0x4d) &&
+ (config1 & 0x0b) == 0x08 && convrate <= 0x0a)
+ name = "adt7421";
+ break;
+ case 0x30 ... 0x38: /* ADM1021A, ADM1023 */
+ case 0x3a ... 0x3e:
+ /*
+ * ADM1021A and compatible chips will be mis-detected as
+ * ADM1023. Chips labeled 'ADM1021A' and 'ADM1023' were both
+ * found to have a Chip ID of 0x3c.
+ * ADM1021A does not officially support low byte registers
+ * (0x12 .. 0x14), but a chip labeled ADM1021A does support it.
+ * Official support for the temperature offset high byte
+ * register (0x11) was added to revision F of the ADM1021A
+ * datasheet.
+ * It is currently unknown if there is a means to distinguish
+ * ADM1021A from ADM1023, and/or if revisions of ADM1021A exist
+ * which differ in functionality from ADM1023.
+ */
+ if (man_id2 == 0x00 && chip_id2 == 0x00 && common_address &&
+ !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "adm1023";
+ break;
+ case 0x39: /* ADM1020 (undocumented) */
+ if (man_id2 == 0x00 && chip_id2 == 0x00 &&
+ (address == 0x4c || address == 0x4d || address == 0x4e) &&
+ !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "adm1020";
+ break;
+ case 0x3f: /* NCT210 */
+ if (man_id2 == 0x00 && chip_id2 == 0x00 && common_address &&
+ !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "nct210";
+ break;
+ case 0x40 ... 0x4f: /* ADM1032 */
+ if (man_id2 == 0x00 && chip_id2 == 0x00 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x3f) &&
+ convrate <= 0x0a)
name = "adm1032";
- /*
- * The ADM1032 supports PEC, but only if combined
- * transactions are not used.
- */
- if (i2c_check_functionality(adapter,
- I2C_FUNC_SMBUS_BYTE))
- info->flags |= I2C_CLIENT_PEC;
- } else
- if (chip_id == 0x51 /* ADT7461 */
- && (config1 & 0x1B) == 0x00
- && convrate <= 0x0A) {
+ break;
+ case 0x51: /* ADT7461 */
+ if (man_id2 == 0x00 && chip_id2 == 0x00 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
name = "adt7461";
- } else
- if (chip_id == 0x57 /* ADT7461A, NCT1008 */
- && (config1 & 0x1B) == 0x00
- && convrate <= 0x0A) {
+ break;
+ case 0x54: /* NCT1008 */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
+ name = "nct1008";
+ break;
+ case 0x55: /* NCT72 */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
+ name = "nct72";
+ break;
+ case 0x57: /* ADT7461A, NCT1008 (datasheet rev. 3) */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
name = "adt7461a";
+ break;
+ case 0x5a: /* NCT214 */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ common_address && !(config1 & 0x1b) && convrate <= 0x0a)
+ name = "nct214";
+ break;
+ case 0x62: /* ADT7481, undocumented */
+ if (man_id2 == 0x41 && chip_id2 == 0x81 &&
+ (address == 0x4b || address == 0x4c) && !(config1 & 0x10) &&
+ !(config2 & 0x7f) && (convrate & 0x0f) <= 0x0b) {
+ name = "adt7481";
}
- } else
- if (man_id == 0x4D) { /* Maxim */
- int emerg, emerg2, status2;
+ break;
+ case 0x65: /* ADT7482, datasheet */
+ case 0x75: /* ADT7482, real chip */
+ if (man_id2 == 0x41 && chip_id2 == 0x82 &&
+ address == 0x4c && !(config1 & 0x10) && !(config2 & 0x7f) &&
+ convrate <= 0x0a)
+ name = "adt7482";
+ break;
+ case 0x94: /* ADT7483 */
+ if (man_id2 == 0x41 && chip_id2 == 0x83 &&
+ common_address &&
+ ((address >= 0x18 && address <= 0x1a) ||
+ (address >= 0x29 && address <= 0x2b) ||
+ (address >= 0x4c && address <= 0x4e)) &&
+ !(config1 & 0x10) && !(config2 & 0x7f) && convrate <= 0x0a)
+ name = "adt7483a";
+ break;
+ default:
+ break;
+ }
+
+ return name;
+}
+
+static const char *lm90_detect_maxim(struct i2c_client *client, bool common_address,
+ int chip_id, int config1, int convrate)
+{
+ int man_id, emerg, emerg2, status2;
+ int address = client->addr;
+ const char *name = NULL;
+
+ switch (chip_id) {
+ case 0x01:
+ if (!common_address)
+ break;
/*
- * We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read
- * LM90_REG_R_MAN_ID in between. If MAX6659_REG_R_REMOTE_EMERG
+ * We read MAX6659_REG_REMOTE_EMERG twice, and re-read
+ * LM90_REG_MAN_ID in between. If MAX6659_REG_REMOTE_EMERG
* exists, both readings will reflect the same value. Otherwise,
* the readings will be different.
*/
emerg = i2c_smbus_read_byte_data(client,
- MAX6659_REG_R_REMOTE_EMERG);
+ MAX6659_REG_REMOTE_EMERG);
man_id = i2c_smbus_read_byte_data(client,
- LM90_REG_R_MAN_ID);
+ LM90_REG_MAN_ID);
emerg2 = i2c_smbus_read_byte_data(client,
- MAX6659_REG_R_REMOTE_EMERG);
+ MAX6659_REG_REMOTE_EMERG);
status2 = i2c_smbus_read_byte_data(client,
- MAX6696_REG_R_STATUS2);
+ MAX6696_REG_STATUS2);
if (emerg < 0 || man_id < 0 || emerg2 < 0 || status2 < 0)
- return -ENODEV;
+ return NULL;
- /*
- * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
- * register. Reading from that address will return the last
- * read value, which in our case is those of the man_id
- * register. Likewise, the config1 register seems to lack a
- * low nibble, so the value will be those of the previous
- * read, so in our case those of the man_id register.
- * MAX6659 has a third set of upper temperature limit registers.
- * Those registers also return values on MAX6657 and MAX6658,
- * thus the only way to detect MAX6659 is by its address.
- * For this reason it will be mis-detected as MAX6657 if its
- * address is 0x4C.
- */
- if (chip_id == man_id
- && (address == 0x4C || address == 0x4D || address == 0x4E)
- && (config1 & 0x1F) == (man_id & 0x0F)
- && convrate <= 0x09) {
- if (address == 0x4C)
- name = "max6657";
- else
- name = "max6659";
- } else
/*
* Even though MAX6695 and MAX6696 do not have a chip ID
* register, reading it returns 0x01. Bit 4 of the config1
* limit registers. We can detect those chips by checking if
* one of those registers exists.
*/
- if (chip_id == 0x01
- && (config1 & 0x10) == 0x00
- && (status2 & 0x01) == 0x00
- && emerg == emerg2
- && convrate <= 0x07) {
+ if (!(config1 & 0x10) && !(status2 & 0x01) && emerg == emerg2 &&
+ convrate <= 0x07)
name = "max6696";
- } else
/*
* The chip_id register of the MAX6680 and MAX6681 holds the
* revision of the chip. The lowest bit of the config1 register
* is unused and should return zero when read, so should the
- * second to last bit of config1 (software reset).
+ * second to last bit of config1 (software reset). Register
+ * address 0x12 (LM90_REG_REMOTE_OFFSL) exists for this chip and
+ * should differ from emerg2, and emerg2 should match man_id
+ * since it does not exist.
*/
- if (chip_id == 0x01
- && (config1 & 0x03) == 0x00
- && convrate <= 0x07) {
+ else if (!(config1 & 0x03) && convrate <= 0x07 &&
+ emerg2 == man_id && emerg2 != status2)
name = "max6680";
- } else
/*
- * The chip_id register of the MAX6646/6647/6649 holds the
- * revision of the chip. The lowest 6 bits of the config1
- * register are unused and should return zero when read.
+ * MAX1617A does not have any extended registers (register
+ * address 0x10 or higher) except for manufacturer and
+ * device ID registers. Unlike other chips of this series,
+ * unsupported registers were observed to return a fixed value
+ * of 0x01.
+ * Note: Multiple chips with different markings labeled as
+ * "MAX1617" (no "A") were observed to report manufacturer ID
+ * 0x4d and device ID 0x01. It is unknown if other variants of
+ * MAX1617/MAX617A with different behavior exist. The detection
+ * code below works for those chips.
*/
- if (chip_id == 0x59
- && (config1 & 0x3f) == 0x00
- && convrate <= 0x07) {
- name = "max6646";
- } else
+ else if (!(config1 & 0x03f) && convrate <= 0x07 &&
+ emerg == 0x01 && emerg2 == 0x01 && status2 == 0x01)
+ name = "max1617";
+ break;
+ case 0x08:
/*
* The chip_id of the MAX6654 holds the revision of the chip.
* The lowest 3 bits of the config1 register are unused and
* should return zero when read.
*/
- if (chip_id == 0x08
- && (config1 & 0x07) == 0x00
- && convrate <= 0x07) {
+ if (common_address && !(config1 & 0x07) && convrate <= 0x07)
name = "max6654";
+ break;
+ case 0x09:
+ /*
+ * The chip_id of the MAX6690 holds the revision of the chip.
+ * The lowest 3 bits of the config1 register are unused and
+ * should return zero when read.
+ * Note that MAX6654 and MAX6690 are practically the same chips.
+ * The only diference is the rated accuracy. Rev. 1 of the
+ * MAX6690 datasheet lists a chip ID of 0x08, and a chip labeled
+ * MAX6654 was observed to have a chip ID of 0x09.
+ */
+ if (common_address && !(config1 & 0x07) && convrate <= 0x07)
+ name = "max6690";
+ break;
+ case 0x4d:
+ /*
+ * MAX6642, MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
+ * register. Reading from that address will return the last
+ * read value, which in our case is those of the man_id
+ * register, or 0x4d.
+ * MAX6642 does not have a conversion rate register, nor low
+ * limit registers. Reading from those registers returns the
+ * last read value.
+ *
+ * For MAX6657, MAX6658 and MAX6659, the config1 register lacks
+ * a low nibble, so the value will be those of the previous
+ * read, so in our case again those of the man_id register.
+ * MAX6659 has a third set of upper temperature limit registers.
+ * Those registers also return values on MAX6657 and MAX6658,
+ * thus the only way to detect MAX6659 is by its address.
+ * For this reason it will be mis-detected as MAX6657 if its
+ * address is 0x4c.
+ */
+ if (address >= 0x48 && address <= 0x4f && config1 == convrate &&
+ !(config1 & 0x0f)) {
+ int regval;
+
+ /*
+ * We know that this is not a MAX6657/58/59 because its
+ * configuration register has the wrong value and it does
+ * not appear to have a conversion rate register.
+ */
+
+ /* re-read manufacturer ID to have a good baseline */
+ if (i2c_smbus_read_byte_data(client, LM90_REG_MAN_ID) != 0x4d)
+ break;
+
+ /* check various non-existing registers */
+ if (i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE) != 0x4d ||
+ i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_LOW) != 0x4d ||
+ i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_LOWH) != 0x4d)
+ break;
+
+ /* check for unused status register bits */
+ regval = i2c_smbus_read_byte_data(client, LM90_REG_STATUS);
+ if (regval < 0 || (regval & 0x2b))
+ break;
+
+ /* re-check unsupported registers */
+ if (i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE) != regval ||
+ i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_LOW) != regval ||
+ i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_LOWH) != regval)
+ break;
+
+ name = "max6642";
+ } else if ((address == 0x4c || address == 0x4d || address == 0x4e) &&
+ (config1 & 0x1f) == 0x0d && convrate <= 0x09) {
+ if (address == 0x4c)
+ name = "max6657";
+ else
+ name = "max6659";
}
- } else
- if (address == 0x4C
- && man_id == 0x5C) { /* Winbond/Nuvoton */
- if ((config1 & 0x2A) == 0x00
- && (config2 & 0xF8) == 0x00) {
- if (chip_id == 0x01 /* W83L771W/G */
- && convrate <= 0x09) {
- name = "w83l771";
- } else
- if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
- && convrate <= 0x08) {
- name = "w83l771";
+ break;
+ case 0x59:
+ /*
+ * The chip_id register of the MAX6646/6647/6649 holds the
+ * revision of the chip. The lowest 6 bits of the config1
+ * register are unused and should return zero when read.
+ * The I2C address of MAX6648/6692 is fixed at 0x4c.
+ * MAX6646 is at address 0x4d, MAX6647 is at address 0x4e,
+ * and MAX6649 is at address 0x4c. A slight difference between
+ * the two sets of chips is that the remote temperature register
+ * reports different values if the DXP pin is open or shorted.
+ * We can use that information to help distinguish between the
+ * chips. MAX6648 will be mis-detected as MAX6649 if the remote
+ * diode is connected, but there isn't really anything we can
+ * do about that.
+ */
+ if (!(config1 & 0x3f) && convrate <= 0x07) {
+ int temp;
+
+ switch (address) {
+ case 0x4c:
+ /*
+ * MAX6649 reports an external temperature
+ * value of 0xff if DXP is open or shorted.
+ * MAX6648 reports 0x80 in that case.
+ */
+ temp = i2c_smbus_read_byte_data(client,
+ LM90_REG_REMOTE_TEMPH);
+ if (temp == 0x80)
+ name = "max6648";
+ else
+ name = "max6649";
+ break;
+ case 0x4d:
+ name = "max6646";
+ break;
+ case 0x4e:
+ name = "max6647";
+ break;
+ default:
+ break;
}
}
- } else
- if (address >= 0x48 && address <= 0x4F
- && man_id == 0xA1) { /* NXP Semiconductor/Philips */
- if (chip_id == 0x00
- && (config1 & 0x2A) == 0x00
- && (config2 & 0xFE) == 0x00
- && convrate <= 0x09) {
- name = "sa56004";
+ break;
+ default:
+ break;
+ }
+
+ return name;
+}
+
+static const char *lm90_detect_nuvoton(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (config2 < 0)
+ return ERR_PTR(-ENODEV);
+
+ if (address == 0x4c && !(config1 & 0x2a) && !(config2 & 0xf8)) {
+ if (chip_id == 0x01 && convrate <= 0x09) {
+ /* W83L771W/G */
+ name = "w83l771";
+ } else if ((chip_id & 0xfe) == 0x10 && convrate <= 0x08) {
+ /* W83L771AWG/ASG */
+ name = "w83l771";
}
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x47) { /* GMT */
- if (chip_id == 0x01 /* G781 */
- && (config1 & 0x3F) == 0x00
- && convrate <= 0x08)
- name = "g781";
- } else
- if (man_id == 0x55 && chip_id == 0x00 &&
- (config1 & 0x1B) == 0x00 && convrate <= 0x09) {
+ }
+ return name;
+}
+
+static const char *lm90_detect_nxp(struct i2c_client *client, bool common_address,
+ int chip_id, int config1, int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+ int config2;
+
+ switch (chip_id) {
+ case 0x00:
+ config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
+ if (config2 < 0)
+ return NULL;
+ if (address >= 0x48 && address <= 0x4f &&
+ !(config1 & 0x2a) && !(config2 & 0xfe) && convrate <= 0x09)
+ name = "sa56004";
+ break;
+ case 0x80:
+ if (common_address && !(config1 & 0x3f) && convrate <= 0x07)
+ name = "ne1618";
+ break;
+ default:
+ break;
+ }
+ return name;
+}
+
+static const char *lm90_detect_gmt(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int address = client->addr;
+
+ /*
+ * According to the datasheet, G781 is supposed to be at I2C Address
+ * 0x4c and have a chip ID of 0x01. G781-1 is supposed to be at I2C
+ * address 0x4d and have a chip ID of 0x03. However, when support
+ * for G781 was added, chips at 0x4c and 0x4d were found to have a
+ * chip ID of 0x01. A G781-1 at I2C address 0x4d was now found with
+ * chip ID 0x03.
+ * To avoid detection failures, accept chip ID 0x01 and 0x03 at both
+ * addresses.
+ * G784 reports manufacturer ID 0x47 and chip ID 0x01. A public
+ * datasheet is not available. Extensive testing suggests that
+ * the chip appears to be fully compatible with G781.
+ * Available register dumps show that G751 also reports manufacturer
+ * ID 0x47 and chip ID 0x01 even though that chip does not officially
+ * support those registers. This makes chip detection somewhat
+ * vulnerable. To improve detection quality, read the offset low byte
+ * and alert fault queue registers and verify that only expected bits
+ * are set.
+ */
+ if ((chip_id == 0x01 || chip_id == 0x03) &&
+ (address == 0x4c || address == 0x4d) &&
+ !(config1 & 0x3f) && convrate <= 0x08) {
+ int reg;
+
+ reg = i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_OFFSL);
+ if (reg < 0 || reg & 0x1f)
+ return NULL;
+ reg = i2c_smbus_read_byte_data(client, TMP451_REG_CONALERT);
+ if (reg < 0 || reg & 0xf1)
+ return NULL;
+
+ return "g781";
+ }
+
+ return NULL;
+}
+
+static const char *lm90_detect_ti49(struct i2c_client *client, bool common_address,
+ int chip_id, int config1, int convrate)
+{
+ if (common_address && chip_id == 0x00 && !(config1 & 0x3f) && !(convrate & 0xf8)) {
+ /* THMC10: Unsupported registers return 0xff */
+ if (i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_TEMPL) == 0xff &&
+ i2c_smbus_read_byte_data(client, LM90_REG_REMOTE_CRIT) == 0xff)
+ return "thmc10";
+ }
+ return NULL;
+}
+
+static const char *lm90_detect_ti(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (chip_id == 0x00 && !(config1 & 0x1b) && convrate <= 0x09) {
int local_ext, conalert, chen, dfc;
local_ext = i2c_smbus_read_byte_data(client,
- TMP451_REG_R_LOCAL_TEMPL);
+ TMP451_REG_LOCAL_TEMPL);
conalert = i2c_smbus_read_byte_data(client,
TMP451_REG_CONALERT);
chen = i2c_smbus_read_byte_data(client, TMP461_REG_CHEN);
dfc = i2c_smbus_read_byte_data(client, TMP461_REG_DFC);
- if ((local_ext & 0x0F) == 0x00 &&
- (conalert & 0xf1) == 0x01 &&
- (chen & 0xfc) == 0x00 &&
- (dfc & 0xfc) == 0x00) {
+ if (!(local_ext & 0x0f) && (conalert & 0xf1) == 0x01 &&
+ (chen & 0xfc) == 0x00 && (dfc & 0xfc) == 0x00) {
if (address == 0x4c && !(chen & 0x03))
name = "tmp451";
else if (address >= 0x48 && address <= 0x4f)
}
}
- if (!name) { /* identification failed */
+ return name;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int man_id, chip_id, config1, convrate, lhigh;
+ const char *name = NULL;
+ int address = client->addr;
+ bool common_address =
+ (address >= 0x18 && address <= 0x1a) ||
+ (address >= 0x29 && address <= 0x2b) ||
+ (address >= 0x4c && address <= 0x4e);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ /*
+ * Get well defined register value for chips with neither man_id nor
+ * chip_id registers.
+ */
+ lhigh = i2c_smbus_read_byte_data(client, LM90_REG_LOCAL_HIGH);
+
+ /* detection and identification */
+ man_id = i2c_smbus_read_byte_data(client, LM90_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, LM90_REG_CHIP_ID);
+ config1 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG1);
+ convrate = i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE);
+ if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0 || lhigh < 0)
+ return -ENODEV;
+
+ /* Bail out immediately if all register report the same value */
+ if (lhigh == man_id && lhigh == chip_id && lhigh == config1 && lhigh == convrate)
+ return -ENODEV;
+
+ /*
+ * If reading man_id and chip_id both return the same value as lhigh,
+ * the chip may not support those registers and return the most recent read
+ * value. Check again with a different register and handle accordingly.
+ */
+ if (man_id == lhigh && chip_id == lhigh) {
+ convrate = i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE);
+ man_id = i2c_smbus_read_byte_data(client, LM90_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, LM90_REG_CHIP_ID);
+ if (convrate < 0 || man_id < 0 || chip_id < 0)
+ return -ENODEV;
+ if (man_id == convrate && chip_id == convrate)
+ man_id = -1;
+ }
+ switch (man_id) {
+ case -1: /* Chip does not support man_id / chip_id */
+ if (common_address && !convrate && !(config1 & 0x7f))
+ name = lm90_detect_lm84(client);
+ break;
+ case 0x01: /* National Semiconductor */
+ name = lm90_detect_national(client, chip_id, config1, convrate);
+ break;
+ case 0x1a: /* ON */
+ name = lm90_detect_on(client, chip_id, config1, convrate);
+ break;
+ case 0x23: /* Genesys Logic */
+ if (common_address && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "gl523sm";
+ break;
+ case 0x41: /* Analog Devices */
+ name = lm90_detect_analog(client, common_address, chip_id, config1,
+ convrate);
+ break;
+ case 0x47: /* GMT */
+ name = lm90_detect_gmt(client, chip_id, config1, convrate);
+ break;
+ case 0x49: /* TI */
+ name = lm90_detect_ti49(client, common_address, chip_id, config1, convrate);
+ break;
+ case 0x4d: /* Maxim Integrated */
+ name = lm90_detect_maxim(client, common_address, chip_id,
+ config1, convrate);
+ break;
+ case 0x54: /* ON MC1066, Microchip TC1068, TCM1617 (originally TelCom) */
+ if (common_address && !(config1 & 0x3f) && !(convrate & 0xf8))
+ name = "mc1066";
+ break;
+ case 0x55: /* TI */
+ name = lm90_detect_ti(client, chip_id, config1, convrate);
+ break;
+ case 0x5c: /* Winbond/Nuvoton */
+ name = lm90_detect_nuvoton(client, chip_id, config1, convrate);
+ break;
+ case 0xa1: /* NXP Semiconductor/Philips */
+ name = lm90_detect_nxp(client, common_address, chip_id, config1, convrate);
+ break;
+ case 0xff: /* MAX1617, G767, NE1617 */
+ if (common_address && chip_id == 0xff && convrate < 8)
+ name = lm90_detect_max1617(client, config1);
+ break;
+ default:
+ break;
+ }
+
+ if (!name) { /* identification failed */
dev_dbg(&adapter->dev,
- "Unsupported chip at 0x%02x (man_id=0x%02X, "
- "chip_id=0x%02X)\n", address, man_id, chip_id);
+ "Unsupported chip at 0x%02x (man_id=0x%02X, chip_id=0x%02X)\n",
+ client->addr, man_id, chip_id);
return -ENODEV;
}
struct lm90_data *data = _data;
struct i2c_client *client = data->client;
+ cancel_delayed_work_sync(&data->alert_work);
+ cancel_work_sync(&data->report_work);
+
/* Restore initial configuration */
- lm90_write_convrate(data, data->convrate_orig);
- i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
- data->config_orig);
+ if (data->flags & LM90_HAVE_CONVRATE)
+ lm90_write_convrate(data, data->convrate_orig);
+ lm90_write_reg(client, LM90_REG_CONFIG1, data->config_orig);
}
static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
struct device_node *np = client->dev.of_node;
int config, convrate;
- convrate = lm90_read_reg(client, LM90_REG_R_CONVRATE);
- if (convrate < 0)
- return convrate;
- data->convrate_orig = convrate;
+ if (data->flags & LM90_HAVE_CONVRATE) {
+ convrate = lm90_read_reg(client, LM90_REG_CONVRATE);
+ if (convrate < 0)
+ return convrate;
+ data->convrate_orig = convrate;
+ lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
+ } else {
+ data->update_interval = 500;
+ }
/*
* Start the conversions.
*/
- config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ config = lm90_read_reg(client, LM90_REG_CONFIG1);
if (config < 0)
return config;
data->config_orig = config;
data->config = config;
- lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
-
/* Check Temperature Range Select */
if (data->flags & LM90_HAVE_EXTENDED_TEMP) {
if (of_property_read_bool(np, "ti,extended-range-enable"))
config |= 0x04;
-
- if (config & 0x04)
- data->flags |= LM90_FLAG_ADT7461_EXT;
+ if (!(config & 0x04))
+ data->flags &= ~LM90_HAVE_EXTENDED_TEMP;
}
/*
* Put MAX6680/MAX8881 into extended resolution (bit 0x10,
* 0.125 degree resolution) and range (0x08, extend range
* to -64 degree) mode for the remote temperature sensor.
+ * Note that expeciments with an actual chip do not show a difference
+ * if bit 3 is set or not.
*/
if (data->kind == max6680)
config |= 0x18;
config |= 0x20;
/*
- * Select external channel 0 for max6695/96
+ * Select external channel 0 for devices with three sensors
*/
- if (data->kind == max6696)
+ if (data->flags & LM90_HAVE_TEMP3)
config &= ~0x08;
/*
return devm_add_action_or_reset(&client->dev, lm90_restore_conf, data);
}
-static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
+static bool lm90_is_tripped(struct i2c_client *client)
{
struct lm90_data *data = i2c_get_clientdata(client);
- int st, st2 = 0;
+ int ret;
- st = lm90_read_reg(client, LM90_REG_R_STATUS);
- if (st < 0)
+ ret = lm90_update_alarms(data, true);
+ if (ret < 0)
return false;
- if (data->kind == max6696) {
- st2 = lm90_read_reg(client, MAX6696_REG_R_STATUS2);
- if (st2 < 0)
- return false;
- }
-
- *status = st | (st2 << 8);
-
- if ((st & 0x7f) == 0 && (st2 & 0xfe) == 0)
- return false;
-
- if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
- (st2 & MAX6696_STATUS2_LOT2))
- dev_dbg(&client->dev,
- "temp%d out of range, please check!\n", 1);
- if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
- (st2 & MAX6696_STATUS2_ROT2))
- dev_dbg(&client->dev,
- "temp%d out of range, please check!\n", 2);
- if (st & LM90_STATUS_ROPEN)
- dev_dbg(&client->dev,
- "temp%d diode open, please check!\n", 2);
- if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
- MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
- dev_dbg(&client->dev,
- "temp%d out of range, please check!\n", 3);
- if (st2 & MAX6696_STATUS2_R2OPEN)
- dev_dbg(&client->dev,
- "temp%d diode open, please check!\n", 3);
-
- if (st & LM90_STATUS_LLOW)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_min_alarm, 0);
- if (st & LM90_STATUS_RLOW)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_min_alarm, 1);
- if (st2 & MAX6696_STATUS2_R2LOW)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_min_alarm, 2);
- if (st & LM90_STATUS_LHIGH)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_max_alarm, 0);
- if (st & LM90_STATUS_RHIGH)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_max_alarm, 1);
- if (st2 & MAX6696_STATUS2_R2HIGH)
- hwmon_notify_event(data->hwmon_dev, hwmon_temp,
- hwmon_temp_max_alarm, 2);
-
- return true;
+ return !!data->current_alarms;
}
static irqreturn_t lm90_irq_thread(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
- u16 status;
- if (lm90_is_tripped(client, &status))
+ if (lm90_is_tripped(client))
return IRQ_HANDLED;
else
return IRQ_NONE;
regulator_disable(regulator);
}
+static int lm90_probe_channel_from_dt(struct i2c_client *client,
+ struct device_node *child,
+ struct lm90_data *data)
+{
+ u32 id;
+ s32 val;
+ int err;
+ struct device *dev = &client->dev;
+
+ err = of_property_read_u32(child, "reg", &id);
+ if (err) {
+ dev_err(dev, "missing reg property of %pOFn\n", child);
+ return err;
+ }
+
+ if (id >= MAX_CHANNELS) {
+ dev_err(dev, "invalid reg property value %d in %pOFn\n", id, child);
+ return -EINVAL;
+ }
+
+ err = of_property_read_string(child, "label", &data->channel_label[id]);
+ if (err == -ENODATA || err == -EILSEQ) {
+ dev_err(dev, "invalid label property in %pOFn\n", child);
+ return err;
+ }
+
+ if (data->channel_label[id])
+ data->channel_config[id] |= HWMON_T_LABEL;
+
+ err = of_property_read_s32(child, "temperature-offset-millicelsius", &val);
+ if (!err) {
+ if (id == 0) {
+ dev_err(dev, "temperature-offset-millicelsius can't be set for internal channel\n");
+ return -EINVAL;
+ }
+
+ err = lm90_set_temp_offset(data, lm90_temp_offset_index[id], id, val);
+ if (err) {
+ dev_err(dev, "can't set temperature offset %d for channel %d (%d)\n",
+ val, id, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int lm90_parse_dt_channel_info(struct i2c_client *client,
+ struct lm90_data *data)
+{
+ int err;
+ struct device_node *child;
+ struct device *dev = &client->dev;
+ const struct device_node *np = dev->of_node;
+
+ for_each_child_of_node(np, child) {
+ if (strcmp(child->name, "channel"))
+ continue;
+
+ err = lm90_probe_channel_from_dt(client, child, data);
+ if (err) {
+ of_node_put(child);
+ return err;
+ }
+ }
+
+ return 0;
+}
static const struct hwmon_ops lm90_ops = {
.is_visible = lm90_is_visible,
.read = lm90_read,
+ .read_string = lm90_read_string,
.write = lm90_write,
};
data->client = client;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
+ INIT_DELAYED_WORK(&data->alert_work, lm90_alert_work);
+ INIT_WORK(&data->report_work, lm90_report_alarms);
/* Set the device type */
if (client->dev.of_node)
data->kind = (enum chips)of_device_get_match_data(&client->dev);
else
data->kind = i2c_match_id(lm90_id, client)->driver_data;
- if (data->kind == adm1032) {
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- client->flags &= ~I2C_CLIENT_PEC;
- }
/*
* Different devices have different alarm bits triggering the
* ALERT# output
*/
data->alert_alarms = lm90_params[data->kind].alert_alarms;
+ data->resolution = lm90_params[data->kind].resolution ? : 11;
/* Set chip capabilities */
data->flags = lm90_params[data->kind].flags;
+ if ((data->flags & (LM90_HAVE_PEC | LM90_HAVE_PARTIAL_PEC)) &&
+ !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_PEC))
+ data->flags &= ~(LM90_HAVE_PEC | LM90_HAVE_PARTIAL_PEC);
+
+ if ((data->flags & LM90_HAVE_PARTIAL_PEC) &&
+ !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ data->flags &= ~LM90_HAVE_PARTIAL_PEC;
+
data->chip.ops = &lm90_ops;
data->chip.info = data->info;
- data->info[0] = HWMON_CHANNEL_INFO(chip,
- HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL | HWMON_C_ALARMS);
+ data->info[0] = &data->chip_info;
+ info = &data->chip_info;
+ info->type = hwmon_chip;
+ info->config = data->chip_config;
+
+ data->chip_config[0] = HWMON_C_REGISTER_TZ;
+ if (data->flags & LM90_HAVE_ALARMS)
+ data->chip_config[0] |= HWMON_C_ALARMS;
+ if (data->flags & LM90_HAVE_CONVRATE)
+ data->chip_config[0] |= HWMON_C_UPDATE_INTERVAL;
+ if (data->flags & LM90_HAVE_FAULTQUEUE)
+ data->chip_config[0] |= HWMON_C_TEMP_SAMPLES;
data->info[1] = &data->temp_info;
info = &data->temp_info;
info->type = hwmon_temp;
info->config = data->channel_config;
- data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM;
- data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_FAULT;
+ data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MAX |
+ HWMON_T_MAX_ALARM;
+ data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MAX |
+ HWMON_T_MAX_ALARM | HWMON_T_FAULT;
+
+ if (data->flags & LM90_HAVE_LOW) {
+ data->channel_config[0] |= HWMON_T_MIN | HWMON_T_MIN_ALARM;
+ data->channel_config[1] |= HWMON_T_MIN | HWMON_T_MIN_ALARM;
+ }
if (data->flags & LM90_HAVE_CRIT) {
data->channel_config[0] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST;
data->channel_config[2] = HWMON_T_INPUT |
HWMON_T_MIN | HWMON_T_MAX |
HWMON_T_CRIT | HWMON_T_CRIT_HYST |
- HWMON_T_EMERGENCY | HWMON_T_EMERGENCY_HYST |
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
- HWMON_T_CRIT_ALARM | HWMON_T_EMERGENCY_ALARM |
- HWMON_T_FAULT;
+ HWMON_T_CRIT_ALARM | HWMON_T_FAULT;
+ if (data->flags & LM90_HAVE_EMERGENCY) {
+ data->channel_config[2] |= HWMON_T_EMERGENCY |
+ HWMON_T_EMERGENCY_HYST;
+ }
+ if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
+ data->channel_config[2] |= HWMON_T_EMERGENCY_ALARM;
+ if (data->flags & LM90_HAVE_OFFSET)
+ data->channel_config[2] |= HWMON_T_OFFSET;
}
+ data->faultqueue_mask = lm90_params[data->kind].faultqueue_mask;
+ data->faultqueue_depth = lm90_params[data->kind].faultqueue_depth;
data->reg_local_ext = lm90_params[data->kind].reg_local_ext;
+ if (data->flags & LM90_HAVE_REMOTE_EXT)
+ data->reg_remote_ext = LM90_REG_REMOTE_TEMPL;
+ data->reg_status2 = lm90_params[data->kind].reg_status2;
/* Set maximum conversion rate */
data->max_convrate = lm90_params[data->kind].max_convrate;
+ /* Parse device-tree channel information */
+ if (client->dev.of_node) {
+ err = lm90_parse_dt_channel_info(client, data);
+ if (err)
+ return err;
+ }
+
/* Initialize the LM90 chip */
err = lm90_init_client(client, data);
if (err < 0) {
* The 'pec' attribute is attached to the i2c device and thus created
* separately.
*/
- if (client->flags & I2C_CLIENT_PEC) {
+ if (data->flags & (LM90_HAVE_PEC | LM90_HAVE_PARTIAL_PEC)) {
err = device_create_file(dev, &dev_attr_pec);
if (err)
return err;
static void lm90_alert(struct i2c_client *client, enum i2c_alert_protocol type,
unsigned int flag)
{
- u16 alarms;
-
if (type != I2C_PROTOCOL_SMBUS_ALERT)
return;
- if (lm90_is_tripped(client, &alarms)) {
+ if (lm90_is_tripped(client)) {
/*
* Disable ALERT# output, because these chips don't implement
* SMBus alert correctly; they should only hold the alert line
struct lm90_data *data = i2c_get_clientdata(client);
if ((data->flags & LM90_HAVE_BROKEN_ALERT) &&
- (alarms & data->alert_alarms)) {
- dev_dbg(&client->dev, "Disabling ALERT#\n");
- lm90_update_confreg(data, data->config | 0x80);
+ (data->current_alarms & data->alert_alarms)) {
+ if (!(data->config & 0x80)) {
+ dev_dbg(&client->dev, "Disabling ALERT#\n");
+ lm90_update_confreg(data, data->config | 0x80);
+ }
+ schedule_delayed_work(&data->alert_work,
+ max_t(int, HZ, msecs_to_jiffies(data->update_interval)));
}
} else {
dev_dbg(&client->dev, "Everything OK\n");
* Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
* DT support added by Clemens Gruber <clemens.gruber@pqgruber.com>
*
- * This driver export the value of analog input voltage to sysfs, the
+ * This driver exports the value of analog input voltage to sysfs, the
* voltage unit is mV. Through the sysfs interface, lm-sensors tool
* can also display the input voltage.
*/
* Client data (each client gets its own)
*/
struct mcp3021_data {
- struct device *hwmon_dev;
+ struct i2c_client *client;
u32 vdd; /* supply and reference voltage in millivolt */
u16 sar_shift;
u16 sar_mask;
u8 output_res;
};
-static int mcp3021_read16(struct i2c_client *client)
+static inline u16 volts_from_reg(struct mcp3021_data *data, u16 val)
{
- struct mcp3021_data *data = i2c_get_clientdata(client);
- int ret;
- u16 reg;
+ return DIV_ROUND_CLOSEST(data->vdd * val, 1 << data->output_res);
+}
+
+static int mcp3021_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct mcp3021_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
__be16 buf;
+ u16 reg;
+ int ret;
+
+ if (type != hwmon_in)
+ return -EOPNOTSUPP;
ret = i2c_master_recv(client, (char *)&buf, 2);
if (ret < 0)
*/
reg = (reg >> data->sar_shift) & data->sar_mask;
- return reg;
-}
+ *val = volts_from_reg(data, reg);
-static inline u16 volts_from_reg(struct mcp3021_data *data, u16 val)
-{
- return DIV_ROUND_CLOSEST(data->vdd * val, 1 << data->output_res);
+ return 0;
}
-static ssize_t in0_input_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static umode_t mcp3021_is_visible(const void *_data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct mcp3021_data *data = i2c_get_clientdata(client);
- int reg, in_input;
+ if (type != hwmon_in)
+ return 0;
- reg = mcp3021_read16(client);
- if (reg < 0)
- return reg;
+ if (attr != hwmon_in_input)
+ return 0;
- in_input = volts_from_reg(data, reg);
-
- return sprintf(buf, "%d\n", in_input);
+ return 0444;
}
-static DEVICE_ATTR_RO(in0_input);
+static const struct hwmon_channel_info *mcp3021_info[] = {
+ HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops mcp3021_hwmon_ops = {
+ .is_visible = mcp3021_is_visible,
+ .read = mcp3021_read,
+};
+
+static const struct hwmon_chip_info mcp3021_chip_info = {
+ .ops = &mcp3021_hwmon_ops,
+ .info = mcp3021_info,
+};
static const struct i2c_device_id mcp3021_id[];
static int mcp3021_probe(struct i2c_client *client)
{
- int err;
struct mcp3021_data *data = NULL;
struct device_node *np = client->dev.of_node;
+ struct device *hwmon_dev;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
break;
}
+ data->client = client;
+
if (data->vdd > MCP3021_VDD_REF_MAX || data->vdd < MCP3021_VDD_REF_MIN)
return -EINVAL;
- err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
- if (err)
- return err;
-
- data->hwmon_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove;
- }
-
- return 0;
-
-exit_remove:
- sysfs_remove_file(&client->dev.kobj, &dev_attr_in0_input.attr);
- return err;
-}
-
-static int mcp3021_remove(struct i2c_client *client)
-{
- struct mcp3021_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_file(&client->dev.kobj, &dev_attr_in0_input.attr);
-
- return 0;
+ hwmon_dev = devm_hwmon_device_register_with_info(&client->dev,
+ client->name,
+ data,
+ &mcp3021_chip_info,
+ NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id mcp3021_id[] = {
.of_match_table = of_match_ptr(of_mcp3021_match),
},
.probe_new = mcp3021_probe,
- .remove = mcp3021_remove,
.id_table = mcp3021_id,
};
"TUF GAMING B550M-PLUS",
"TUF GAMING B550M-PLUS (WI-FI)",
"TUF GAMING B550-PLUS",
+ "TUF GAMING B550-PLUS WIFI II",
"TUF GAMING B550-PRO",
"TUF GAMING X570-PLUS",
"TUF GAMING X570-PLUS (WI-FI)",
exit_device_put:
platform_device_put(pdev[i]);
exit_device_unregister:
- while (--i >= 0) {
- if (pdev[i])
- platform_device_unregister(pdev[i]);
- }
+ while (i--)
+ platform_device_unregister(pdev[i]);
exit_unregister:
platform_driver_unregister(&nct6775_driver);
return err;
{
int i;
- for (i = 0; i < ARRAY_SIZE(pdev); i++) {
- if (pdev[i])
- platform_device_unregister(pdev[i]);
- }
+ for (i = 0; i < ARRAY_SIZE(pdev); i++)
+ platform_device_unregister(pdev[i]);
platform_driver_unregister(&nct6775_driver);
}
rc = sysfs_emit(buf, "%u",
get_unaligned_be32(&extn->sensor_id));
} else {
- rc = sysfs_emit(buf, "%02x%02x%02x%02x\n",
- extn->name[0], extn->name[1],
- extn->name[2], extn->name[3]);
+ rc = sysfs_emit(buf, "%4phN\n", extn->name);
}
break;
case 1:
rc = sysfs_emit(buf, "%02x\n", extn->flags);
break;
case 2:
- rc = sysfs_emit(buf, "%02x%02x%02x%02x%02x%02x\n",
- extn->data[0], extn->data[1], extn->data[2],
- extn->data[3], extn->data[4], extn->data[5]);
+ rc = sysfs_emit(buf, "%6phN\n", extn->data);
break;
default:
return -EINVAL;
mutex_lock(&ctx->sbe_error_lock);
if (!ctx->sbe_error) {
if (resp_len > ctx->ffdc_size) {
- if (ctx->ffdc)
- kvfree(ctx->ffdc);
+ kvfree(ctx->ffdc);
ctx->ffdc = kvmalloc(resp_len, GFP_KERNEL);
if (!ctx->ffdc) {
ctx->ffdc_len = 0;
ctx->sbe = NULL;
occ_shutdown(occ);
- if (ctx->ffdc)
- kvfree(ctx->ffdc);
+ kvfree(ctx->ffdc);
return 0;
}
If you say yes here you get regulator support for National
Semiconductor LM25066, LM5064, and LM5066.
+config SENSORS_LT7182S
+ tristate "Analog Devices LT7182S"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices LT7182S.
+
+ This driver can also be built as a module. If so, the module will
+ be called lt7182s.
+
config SENSORS_LTC2978
tristate "Linear Technologies LTC2978 and compatibles"
help
obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o
obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
+obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
obj-$(CONFIG_SENSORS_MAX15301) += max15301.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Analog Devices LT7182S
+ *
+ * Copyright (c) 2022 Guenter Roeck
+ *
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include "pmbus.h"
+
+#define LT7182S_NUM_PAGES 2
+
+#define MFR_READ_EXTVCC 0xcd
+#define MFR_READ_ITH 0xce
+#define MFR_CONFIG_ALL_LT7182S 0xd1
+#define MFR_IOUT_PEAK 0xd7
+#define MFR_ADC_CONTROL_LT7182S 0xd8
+
+#define MFR_DEBUG_TELEMETRY BIT(0)
+
+#define MFR_VOUT_PEAK 0xdd
+#define MFR_VIN_PEAK 0xde
+#define MFR_TEMPERATURE_1_PEAK 0xdf
+#define MFR_CLEAR_PEAKS 0xe3
+
+#define MFR_CONFIG_IEEE BIT(8)
+
+static int lt7182s_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ if (page == 0 || page == 1)
+ ret = pmbus_read_word_data(client, page, phase, MFR_READ_ITH);
+ else
+ ret = pmbus_read_word_data(client, 0, phase, MFR_READ_EXTVCC);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, phase, MFR_IOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page, phase, MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, page, phase, MFR_VIN_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page, phase, MFR_TEMPERATURE_1_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ ret = (page == 0) ? 0 : -ENODATA;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int lt7182s_write_word_data(struct i2c_client *client, int page, int reg, u16 word)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ ret = pmbus_write_byte(client, 0, MFR_CLEAR_PEAKS);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static struct pmbus_driver_info lt7182s_info = {
+ .pages = LT7182S_NUM_PAGES,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+ PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT,
+ .read_word_data = lt7182s_read_word_data,
+ .write_word_data = lt7182s_write_word_data,
+};
+
+static int lt7182s_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct pmbus_driver_info *info;
+ u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read PMBUS_MFR_ID\n");
+ return ret;
+ }
+ if (ret != 3 || strncmp(buf, "ADI", 3)) {
+ buf[ret] = '\0';
+ dev_err(dev, "Manufacturer '%s' not supported\n", buf);
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read PMBUS_MFR_MODEL\n");
+ return ret;
+ }
+ if (ret != 7 || strncmp(buf, "LT7182S", 7)) {
+ buf[ret] = '\0';
+ dev_err(dev, "Model '%s' not supported\n", buf);
+ return -ENODEV;
+ }
+
+ info = devm_kmemdup(dev, <7182s_info,
+ sizeof(struct pmbus_driver_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ /* Set data format to IEEE754 if configured */
+ ret = i2c_smbus_read_word_data(client, MFR_CONFIG_ALL_LT7182S);
+ if (ret < 0)
+ return ret;
+ if (ret & MFR_CONFIG_IEEE) {
+ info->format[PSC_VOLTAGE_IN] = ieee754;
+ info->format[PSC_VOLTAGE_OUT] = ieee754;
+ info->format[PSC_CURRENT_IN] = ieee754;
+ info->format[PSC_CURRENT_OUT] = ieee754;
+ info->format[PSC_TEMPERATURE] = ieee754;
+ info->format[PSC_POWER] = ieee754;
+ }
+
+ /* Enable VMON output if configured */
+ ret = i2c_smbus_read_byte_data(client, MFR_ADC_CONTROL_LT7182S);
+ if (ret < 0)
+ return ret;
+ if (ret & MFR_DEBUG_TELEMETRY) {
+ info->pages = 3;
+ info->func[0] |= PMBUS_HAVE_VMON;
+ info->func[1] |= PMBUS_HAVE_VMON;
+ info->func[2] = PMBUS_HAVE_VMON;
+ }
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id lt7182s_id[] = {
+ { "lt7182s", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, lt7182s_id);
+
+static const struct of_device_id __maybe_unused lt7182s_of_match[] = {
+ { .compatible = "adi,lt7182s" },
+ {}
+};
+
+static struct i2c_driver lt7182s_driver = {
+ .driver = {
+ .name = "lt7182s",
+ .of_match_table = of_match_ptr(lt7182s_of_match),
+ },
+ .probe_new = lt7182s_probe,
+ .id_table = lt7182s_id,
+};
+
+module_i2c_driver(lt7182s_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices LT7182S");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+#define LTC2978_ADC_RES 0xFFFF
+#define LTC2978_N_ADC 122
+#define LTC2978_MAX_UV (LTC2978_ADC_RES * LTC2978_N_ADC)
+#define LTC2978_UV_STEP 1000
+#define LTC2978_N_VOLTAGES ((LTC2978_MAX_UV / LTC2978_UV_STEP) + 1)
+
static const struct regulator_desc ltc2978_reg_desc[] = {
+ PMBUS_REGULATOR_STEP("vout", 0, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 1, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 2, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 3, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 4, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 5, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 6, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+ PMBUS_REGULATOR_STEP("vout", 7, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+};
+
+static const struct regulator_desc ltc2978_reg_desc_default[] = {
PMBUS_REGULATOR("vout", 0),
PMBUS_REGULATOR("vout", 1),
PMBUS_REGULATOR("vout", 2),
#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
info->num_regulators = info->pages;
- info->reg_desc = ltc2978_reg_desc;
- if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
- dev_err(&client->dev, "num_regulators too large!");
- info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+ switch (data->id) {
+ case ltc2972:
+ case ltc2974:
+ case ltc2975:
+ case ltc2977:
+ case ltc2978:
+ case ltc2979:
+ case ltc2980:
+ case ltm2987:
+ info->reg_desc = ltc2978_reg_desc;
+ if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
+ dev_warn(&client->dev, "num_regulators too large!");
+ info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+ }
+ break;
+ default:
+ info->reg_desc = ltc2978_reg_desc_default;
+ if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc_default)) {
+ dev_warn(&client->dev, "num_regulators too large!");
+ info->num_regulators =
+ ARRAY_SIZE(ltc2978_reg_desc_default);
+ }
+ break;
}
#endif
#define PMBUS_PHASE_VIRTUAL BIT(30) /* Phases on this page are virtual */
#define PMBUS_PAGE_VIRTUAL BIT(31) /* Page is virtual */
-enum pmbus_data_format { linear = 0, direct, vid };
+enum pmbus_data_format { linear = 0, ieee754, direct, vid };
enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
struct pmbus_driver_info {
extern const struct regulator_ops pmbus_regulator_ops;
-/* Macro for filling in array of struct regulator_desc */
-#define PMBUS_REGULATOR(_name, _id) \
+/* Macros for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step) \
[_id] = { \
.name = (_name # _id), \
.supply_name = "vin", \
.ops = &pmbus_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .n_voltages = _voltages, \
+ .uV_step = _step, \
}
+#define PMBUS_REGULATOR(_name, _id) PMBUS_REGULATOR_STEP(_name, _id, 0, 0)
+
/* Function declarations */
void pmbus_clear_cache(struct i2c_client *client);
s16 currpage; /* current page, -1 for unknown/unset */
s16 currphase; /* current phase, 0xff for all, -1 for unknown/unset */
+
+ int vout_low[PMBUS_PAGES]; /* voltage low margin */
+ int vout_high[PMBUS_PAGES]; /* voltage high margin */
};
struct pmbus_debugfs_entry {
}
EXPORT_SYMBOL_NS_GPL(pmbus_update_byte_data, PMBUS);
+static int pmbus_read_block_data(struct i2c_client *client, int page, u8 reg,
+ char *data_buf)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page, 0xff);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_read_block_data(client, reg, data_buf);
+}
+
static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
int reg)
{
}
EXPORT_SYMBOL_NS_GPL(pmbus_check_word_register, PMBUS);
+static bool __maybe_unused pmbus_check_block_register(struct i2c_client *client,
+ int page, int reg)
+{
+ int rv;
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ char data_buf[I2C_SMBUS_BLOCK_MAX + 2];
+
+ rv = pmbus_read_block_data(client, page, reg, data_buf);
+ if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+ rv = pmbus_check_status_cml(client);
+ if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
+ data->read_status(client, -1);
+ pmbus_clear_fault_page(client, -1);
+ return rv >= 0;
+}
+
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
sensor->phase, sensor->reg);
}
+/*
+ * Convert ieee754 sensor values to milli- or micro-units
+ * depending on sensor type.
+ *
+ * ieee754 data format:
+ * bit 15: sign
+ * bit 10..14: exponent
+ * bit 0..9: mantissa
+ * exponent=0:
+ * v=(−1)^signbit * 2^(−14) * 0.significantbits
+ * exponent=1..30:
+ * v=(−1)^signbit * 2^(exponent - 15) * 1.significantbits
+ * exponent=31:
+ * v=NaN
+ *
+ * Add the number mantissa bits into the calculations for simplicity.
+ * To do that, add '10' to the exponent. By doing that, we can just add
+ * 0x400 to normal values and get the expected result.
+ */
+static long pmbus_reg2data_ieee754(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
+{
+ int exponent;
+ bool sign;
+ long val;
+
+ /* only support half precision for now */
+ sign = sensor->data & 0x8000;
+ exponent = (sensor->data >> 10) & 0x1f;
+ val = sensor->data & 0x3ff;
+
+ if (exponent == 0) { /* subnormal */
+ exponent = -(14 + 10);
+ } else if (exponent == 0x1f) { /* NaN, convert to min/max */
+ exponent = 0;
+ val = 65504;
+ } else {
+ exponent -= (15 + 10); /* normal */
+ val |= 0x400;
+ }
+
+ /* scale result to milli-units for all sensors except fans */
+ if (sensor->class != PSC_FAN)
+ val = val * 1000L;
+
+ /* scale result to micro-units for power sensors */
+ if (sensor->class == PSC_POWER)
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ if (sign)
+ val = -val;
+
+ return val;
+}
+
/*
* Convert linear sensor values to milli- or micro-units
* depending on sensor type.
case vid:
val = pmbus_reg2data_vid(data, sensor);
break;
+ case ieee754:
+ val = pmbus_reg2data_ieee754(data, sensor);
+ break;
case linear:
default:
val = pmbus_reg2data_linear(data, sensor);
return val;
}
-#define MAX_MANTISSA (1023 * 1000)
-#define MIN_MANTISSA (511 * 1000)
+#define MAX_IEEE_MANTISSA (0x7ff * 1000)
+#define MIN_IEEE_MANTISSA (0x400 * 1000)
+
+static u16 pmbus_data2reg_ieee754(struct pmbus_data *data,
+ struct pmbus_sensor *sensor, long val)
+{
+ u16 exponent = (15 + 10);
+ long mantissa;
+ u16 sign = 0;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (val < 0) {
+ sign = 0x8000;
+ val = -val;
+ }
+
+ /* Power is in uW. Convert to mW before converting. */
+ if (sensor->class == PSC_POWER)
+ val = DIV_ROUND_CLOSEST(val, 1000L);
+
+ /*
+ * For simplicity, convert fan data to milli-units
+ * before calculating the exponent.
+ */
+ if (sensor->class == PSC_FAN)
+ val = val * 1000;
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val > MAX_IEEE_MANTISSA && exponent < 30) {
+ exponent++;
+ val >>= 1;
+ }
+ /*
+ * Increase small mantissa to generate valid 'normal'
+ * number
+ */
+ while (val < MIN_IEEE_MANTISSA && exponent > 1) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /*
+ * Ensure that the resulting number is within range.
+ * Valid range is 0x400..0x7ff, where bit 10 reflects
+ * the implied high bit in normalized ieee754 numbers.
+ * Set the range to 0x400..0x7ff to reflect this.
+ * The upper bit is then removed by the mask against
+ * 0x3ff in the final assignment.
+ */
+ if (mantissa > 0x7ff)
+ mantissa = 0x7ff;
+ else if (mantissa < 0x400)
+ mantissa = 0x400;
+
+ /* Convert to sign, 5 bit exponent, 10 bit mantissa */
+ return sign | (mantissa & 0x3ff) | ((exponent << 10) & 0x7c00);
+}
+
+#define MAX_LIN_MANTISSA (1023 * 1000)
+#define MIN_LIN_MANTISSA (511 * 1000)
static u16 pmbus_data2reg_linear(struct pmbus_data *data,
struct pmbus_sensor *sensor, s64 val)
val = val * 1000LL;
/* Reduce large mantissa until it fits into 10 bit */
- while (val >= MAX_MANTISSA && exponent < 15) {
+ while (val >= MAX_LIN_MANTISSA && exponent < 15) {
exponent++;
val >>= 1;
}
/* Increase small mantissa to improve precision */
- while (val < MIN_MANTISSA && exponent > -15) {
+ while (val < MIN_LIN_MANTISSA && exponent > -15) {
exponent--;
val <<= 1;
}
case vid:
regval = pmbus_data2reg_vid(data, sensor, val);
break;
+ case ieee754:
+ regval = pmbus_data2reg_ieee754(data, sensor, val);
+ break;
case linear:
default:
regval = pmbus_data2reg_linear(data, sensor, val);
if (data->info->format[PSC_VOLTAGE_OUT] != direct)
return -ENODEV;
break;
+ case 3: /* ieee 754 half precision */
+ if (data->info->format[PSC_VOLTAGE_OUT] != ieee754)
+ return -ENODEV;
+ break;
default:
return -ENODEV;
}
return _pmbus_read_word_data(client, page, 0xff, PMBUS_STATUS_WORD);
}
+/* PEC attribute support */
+
+static ssize_t pec_show(struct device *dev, struct device_attribute *dummy,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return sysfs_emit(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
+}
+
+static ssize_t pec_store(struct device *dev, struct device_attribute *dummy,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ bool enable;
+ int err;
+
+ err = kstrtobool(buf, &enable);
+ if (err < 0)
+ return err;
+
+ if (enable)
+ client->flags |= I2C_CLIENT_PEC;
+ else
+ client->flags &= ~I2C_CLIENT_PEC;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(pec);
+
+static void pmbus_remove_pec(void *dev)
+{
+ device_remove_file(dev, &dev_attr_pec);
+}
+
static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
struct pmbus_driver_info *info)
{
return ret;
}
+ if (client->flags & I2C_CLIENT_PEC) {
+ /*
+ * If I2C_CLIENT_PEC is set here, both the I2C adapter and the
+ * chip support PEC. Add 'pec' attribute to client device to let
+ * the user control it.
+ */
+ ret = device_create_file(dev, &dev_attr_pec);
+ if (ret)
+ return ret;
+ ret = devm_add_action_or_reset(dev, pmbus_remove_pec, dev);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
return 0;
}
+static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ struct pmbus_sensor s = {
+ .page = page,
+ .class = PSC_VOLTAGE_OUT,
+ .convert = true,
+ .data = -1,
+ };
+
+ if (!data->vout_low[page]) {
+ if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MIN))
+ s.data = _pmbus_read_word_data(client, page, 0xff,
+ PMBUS_MFR_VOUT_MIN);
+ if (s.data < 0) {
+ s.data = _pmbus_read_word_data(client, page, 0xff,
+ PMBUS_VOUT_MARGIN_LOW);
+ if (s.data < 0)
+ return s.data;
+ }
+ data->vout_low[page] = pmbus_reg2data(data, &s);
+ }
+
+ return data->vout_low[page];
+}
+
+static int pmbus_regulator_get_high_margin(struct i2c_client *client, int page)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ struct pmbus_sensor s = {
+ .page = page,
+ .class = PSC_VOLTAGE_OUT,
+ .convert = true,
+ .data = -1,
+ };
+
+ if (!data->vout_high[page]) {
+ if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MAX))
+ s.data = _pmbus_read_word_data(client, page, 0xff,
+ PMBUS_MFR_VOUT_MAX);
+ if (s.data < 0) {
+ s.data = _pmbus_read_word_data(client, page, 0xff,
+ PMBUS_VOUT_MARGIN_HIGH);
+ if (s.data < 0)
+ return s.data;
+ }
+ data->vout_high[page] = pmbus_reg2data(data, &s);
+ }
+
+ return data->vout_high[page];
+}
+
static int pmbus_regulator_get_voltage(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
*selector = 0;
- if (pmbus_check_word_register(client, s.page, PMBUS_MFR_VOUT_MIN))
- s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_MFR_VOUT_MIN);
- if (s.data < 0) {
- s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_VOUT_MARGIN_LOW);
- if (s.data < 0)
- return s.data;
- }
- low = pmbus_reg2data(data, &s);
+ low = pmbus_regulator_get_low_margin(client, s.page);
+ if (low < 0)
+ return low;
- s.data = -1;
- if (pmbus_check_word_register(client, s.page, PMBUS_MFR_VOUT_MAX))
- s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_MFR_VOUT_MAX);
- if (s.data < 0) {
- s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_VOUT_MARGIN_HIGH);
- if (s.data < 0)
- return s.data;
- }
- high = pmbus_reg2data(data, &s);
+ high = pmbus_regulator_get_high_margin(client, s.page);
+ if (high < 0)
+ return high;
/* Make sure we are within margins */
if (low > val)
return _pmbus_write_word_data(client, s.page, PMBUS_VOUT_COMMAND, (u16)val);
}
+static int pmbus_regulator_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ int val, low, high;
+
+ if (selector >= rdev->desc->n_voltages ||
+ selector < rdev->desc->linear_min_sel)
+ return -EINVAL;
+
+ selector -= rdev->desc->linear_min_sel;
+ val = DIV_ROUND_CLOSEST(rdev->desc->min_uV +
+ (rdev->desc->uV_step * selector), 1000); /* convert to mV */
+
+ low = pmbus_regulator_get_low_margin(client, rdev_get_id(rdev));
+ if (low < 0)
+ return low;
+
+ high = pmbus_regulator_get_high_margin(client, rdev_get_id(rdev));
+ if (high < 0)
+ return high;
+
+ if (val >= low && val <= high)
+ return val * 1000; /* unit is uV */
+
+ return 0;
+}
+
const struct regulator_ops pmbus_regulator_ops = {
.enable = pmbus_regulator_enable,
.disable = pmbus_regulator_disable,
.get_error_flags = pmbus_regulator_get_error_flags,
.get_voltage = pmbus_regulator_get_voltage,
.set_voltage = pmbus_regulator_set_voltage,
+ .list_voltage = pmbus_regulator_list_voltage,
};
EXPORT_SYMBOL_NS_GPL(pmbus_regulator_ops, PMBUS);
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_status, pmbus_debugfs_get_status,
NULL, "0x%04llx\n");
-static int pmbus_debugfs_get_pec(void *data, u64 *val)
-{
- struct i2c_client *client = data;
-
- *val = !!(client->flags & I2C_CLIENT_PEC);
-
- return 0;
-}
-
-static int pmbus_debugfs_set_pec(void *data, u64 val)
+static ssize_t pmbus_debugfs_mfr_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
int rc;
- struct i2c_client *client = data;
-
- if (!val) {
- client->flags &= ~I2C_CLIENT_PEC;
- return 0;
- }
-
- if (val != 1)
- return -EINVAL;
+ struct pmbus_debugfs_entry *entry = file->private_data;
+ char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
- rc = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+ rc = pmbus_read_block_data(entry->client, entry->page, entry->reg,
+ data);
if (rc < 0)
return rc;
- if (!(rc & PB_CAPABILITY_ERROR_CHECK))
- return -EOPNOTSUPP;
+ /* Add newline at the end of a read data */
+ data[rc] = '\n';
- client->flags |= I2C_CLIENT_PEC;
+ /* Include newline into the length */
+ rc += 1;
- return 0;
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
}
-DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_pec, pmbus_debugfs_get_pec,
- pmbus_debugfs_set_pec, "%llu\n");
+
+static const struct file_operations pmbus_debugfs_ops_mfr = {
+ .llseek = noop_llseek,
+ .read = pmbus_debugfs_mfr_read,
+ .write = NULL,
+ .open = simple_open,
+};
static void pmbus_remove_debugfs(void *data)
{
return -ENODEV;
}
- /* Allocate the max possible entries we need. */
+ /*
+ * Allocate the max possible entries we need.
+ * 6 entries device-specific
+ * 10 entries page-specific
+ */
entries = devm_kcalloc(data->dev,
- data->info->pages * 10, sizeof(*entries),
+ 6 + data->info->pages * 10, sizeof(*entries),
GFP_KERNEL);
if (!entries)
return -ENOMEM;
- debugfs_create_file("pec", 0664, data->debugfs, client,
- &pmbus_debugfs_ops_pec);
-
+ /*
+ * Add device-specific entries.
+ * Please note that the PMBUS standard allows all registers to be
+ * page-specific.
+ * To reduce the number of debugfs entries for devices with many pages
+ * assume that values of the following registers are the same for all
+ * pages and report values only for page 0.
+ */
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_ID)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_ID;
+ debugfs_create_file("mfr_id", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_MODEL)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_MODEL;
+ debugfs_create_file("mfr_model", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_REVISION)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_REVISION;
+ debugfs_create_file("mfr_revision", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_LOCATION)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_LOCATION;
+ debugfs_create_file("mfr_location", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_DATE)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_DATE;
+ debugfs_create_file("mfr_date", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ if (pmbus_check_block_register(client, 0, PMBUS_MFR_SERIAL)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_MFR_SERIAL;
+ debugfs_create_file("mfr_serial", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_mfr);
+ }
+
+ /* Add page specific entries */
for (i = 0; i < data->info->pages; ++i) {
/* Check accessibility of status register if it's not page 0 */
if (!i || pmbus_check_status_register(client, i)) {
return PTR_ERR_OR_ZERO(sch56xx_pdev);
}
+static const struct dmi_system_id sch56xx_dmi_override_table[] __initconst = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS W380"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO P710"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO E9900"),
+ },
+ },
+ { }
+};
+
/* For autoloading only */
static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
{
if (!dmi_check_system(sch56xx_dmi_table))
return -ENODEV;
- /*
- * Some machines like the Esprimo P720 and Esprimo C700 have
- * onboard devices named " Antiope"/" Theseus" instead of
- * "Antiope"/"Theseus", so we need to check for both.
- */
- if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
- return -ENODEV;
+ if (!dmi_check_system(sch56xx_dmi_override_table)) {
+ /*
+ * Some machines like the Esprimo P720 and Esprimo C700 have
+ * onboard devices named " Antiope"/" Theseus" instead of
+ * "Antiope"/"Theseus", so we need to check for both.
+ */
+ if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
+ !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
+ !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
+ !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
+ return -ENODEV;
+ }
}
/*
static int sht15_remove(struct platform_device *pdev)
{
struct sht15_data *data = platform_get_drvdata(pdev);
+ int ret;
- /*
- * Make sure any reads from the device are done and
- * prevent new ones beginning
- */
- mutex_lock(&data->read_lock);
- if (sht15_soft_reset(data)) {
- mutex_unlock(&data->read_lock);
- return -EFAULT;
- }
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+
+ ret = sht15_soft_reset(data);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to reset device (%pe)\n", ERR_PTR(ret));
+
if (!IS_ERR(data->reg)) {
regulator_unregister_notifier(data->reg, &data->nb);
regulator_disable(data->reg);
}
- mutex_unlock(&data->read_lock);
-
return 0;
}
static int tps23861_read_voltage(struct tps23861_data *data, int channel,
long *val)
{
- unsigned int regval;
+ __le16 regval;
+ long raw_val;
int err;
if (channel < TPS23861_NUM_PORTS) {
if (err < 0)
return err;
- *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
+ raw_val = le16_to_cpu(regval);
+ *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * VOLTAGE_LSB) / 1000;
return 0;
}
static int tps23861_read_current(struct tps23861_data *data, int channel,
long *val)
{
- unsigned int current_lsb;
- unsigned int regval;
+ long raw_val, current_lsb;
+ __le16 regval;
+
int err;
if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
if (err < 0)
return err;
- *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
+ raw_val = le16_to_cpu(regval);
+ *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * current_lsb) / 1000000;
return 0;
}
config I2C_BRCMSTB
tristate "BRCM Settop/DSL I2C controller"
- depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+ depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
default y
help
#include <asm/nospec-branch.h>
#include <asm/mwait.h>
#include <asm/msr.h>
+#include <asm/fpu/api.h>
#define INTEL_IDLE_VERSION "0.5.1"
*/
#define CPUIDLE_FLAG_IBRS BIT(16)
+/*
+ * Initialize large xstate for the C6-state entrance.
+ */
+#define CPUIDLE_FLAG_INIT_XSTATE BIT(17)
+
/*
* MWAIT takes an 8-bit "hint" in EAX "suggesting"
* the C-state (top nibble) and sub-state (bottom nibble)
return ret;
}
+static __cpuidle int intel_idle_xstate(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
+{
+ fpu_idle_fpregs();
+ return __intel_idle(dev, drv, index);
+}
+
/**
* intel_idle_s2idle - Ask the processor to enter the given idle state.
* @dev: cpuidle device of the target CPU.
static __cpuidle int intel_idle_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- unsigned long eax = flg2MWAIT(drv->states[index].flags);
unsigned long ecx = 1; /* break on interrupt flag */
+ struct cpuidle_state *state = &drv->states[index];
+ unsigned long eax = flg2MWAIT(state->flags);
+
+ if (state->flags & CPUIDLE_FLAG_INIT_XSTATE)
+ fpu_idle_fpregs();
mwait_idle_with_hints(eax, ecx);
{
.name = "C6",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED |
+ CPUIDLE_FLAG_INIT_XSTATE,
.exit_latency = 290,
.target_residency = 800,
.enter = &intel_idle,
drv->states[drv->state_count].enter = intel_idle_ibrs;
}
+ if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_INIT_XSTATE)
+ drv->states[drv->state_count].enter = intel_idle_xstate;
+
if ((disabled_states_mask & BIT(drv->state_count)) ||
((icpu->use_acpi || force_use_acpi) &&
intel_idle_off_by_default(mwait_hint) &&
u32 vector;
struct irq_cfg *cfg;
int ioapic_id;
- struct cpumask *affinity;
+ const struct cpumask *affinity;
int cpu;
struct hv_interrupt_entry entry;
struct hyperv_root_ir_data *data = irq_data->chip_data;
config ARM_GIC
bool
select IRQ_DOMAIN_HIERARCHY
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config ARM_GIC_PM
bool
bool
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config ARM_GIC_V3_ITS
bool
bool
select GENERIC_IRQ_CHIP
select PCI_MSI if PCI
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config ALPINE_MSI
bool
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config BCM7038_L1_IRQ
tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver"
default ARCH_BRCMSTB || BMIPS_GENERIC
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config BCM7120_L2_IRQ
tristate "Broadcom STB 7120-style L2 interrupt controller driver"
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
- select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
+ select GENERIC_IRQ_IPI if SMP && SYS_SUPPORTS_MULTITHREADING
select IRQ_DOMAIN
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config CLPS711X_IRQCHIP
bool
Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
to 8 external interrupts with configurable sense select.
+config RENESAS_RZG2L_IRQC
+ bool "Renesas RZ/G2L (and alike SoC) IRQC support" if COMPILE_TEST
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Enable support for the Renesas RZ/G2L (and alike SoC) Interrupt Controller
+ for external devices.
+
config SL28CPLD_INTC
bool "Kontron sl28cpld IRQ controller"
depends on MFD_SL28CPLD=y || COMPILE_TEST
config XTENSA_MX
bool
select IRQ_DOMAIN
- select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
config XILINX_INTC
bool "Xilinx Interrupt Controller IP"
config MIPS_GIC
bool
- select GENERIC_IRQ_IPI
+ select GENERIC_IRQ_IPI if SMP
+ select IRQ_DOMAIN_HIERARCHY
select MIPS_CM
config INGENIC_IRQ
bool "SiFive Platform-Level Interrupt Controller"
depends on RISCV
select IRQ_DOMAIN_HIERARCHY
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
help
This enables support for the PLIC chip found in SiFive (and
potentially other) RISC-V systems. The PLIC controls devices
Say yes here to add support for the IRQ combiner devices embedded
in Samsung Exynos chips.
+config IRQ_LOONGARCH_CPU
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ help
+ Support for the LoongArch CPU Interrupt Controller. For details of
+ irq chip hierarchy on LoongArch platforms please read the document
+ Documentation/loongarch/irq-chip-model.rst.
+
config LOONGSON_LIOINTC
bool "Loongson Local I/O Interrupt Controller"
depends on MACH_LOONGSON64
help
Support for the Loongson Local I/O Interrupt Controller.
+config LOONGSON_EIOINTC
+ bool "Loongson Extend I/O Interrupt Controller"
+ depends on LOONGARCH
+ depends on MACH_LOONGSON64
+ default MACH_LOONGSON64
+ select IRQ_DOMAIN_HIERARCHY
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson3 Extend I/O Interrupt Vector Controller.
+
config LOONGSON_HTPIC
bool "Loongson3 HyperTransport PIC Controller"
depends on MACH_LOONGSON64 && MIPS
config LOONGSON_PCH_PIC
bool "Loongson PCH PIC Controller"
- depends on MACH_LOONGSON64 || COMPILE_TEST
+ depends on MACH_LOONGSON64
default MACH_LOONGSON64
select IRQ_DOMAIN_HIERARCHY
select IRQ_FASTEOI_HIERARCHY_HANDLERS
config LOONGSON_PCH_MSI
bool "Loongson PCH MSI Controller"
- depends on MACH_LOONGSON64 || COMPILE_TEST
+ depends on MACH_LOONGSON64
depends on PCI
default MACH_LOONGSON64
select IRQ_DOMAIN_HIERARCHY
help
Support for the Loongson PCH MSI Controller.
+config LOONGSON_PCH_LPC
+ bool "Loongson PCH LPC Controller"
+ depends on MACH_LOONGSON64
+ default (MACH_LOONGSON64 && LOONGARCH)
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Support for the Loongson PCH LPC Controller.
+
config MST_IRQ
bool "MStar Interrupt Controller"
depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST
help
Support for Microchip External Interrupt Controller.
+config SUNPLUS_SP7021_INTC
+ bool "Sunplus SP7021 interrupt controller" if COMPILE_TEST
+ default SOC_SP7021
+ help
+ Support for the Sunplus SP7021 Interrupt Controller IP core.
+ SP7021 SoC has 2 Chips: C-Chip & P-Chip. This is used as a
+ chained controller, routing all interrupt source in P-Chip to
+ the primary controller on C-Chip.
+
endmenu
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_RENESAS_RZA1_IRQC) += irq-renesas-rza1.o
+obj-$(CONFIG_RENESAS_RZG2L_IRQC) += irq-renesas-rzg2l.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
obj-$(CONFIG_TI_SCI_INTA_IRQCHIP) += irq-ti-sci-inta.o
obj-$(CONFIG_TI_PRUSS_INTC) += irq-pruss-intc.o
+obj-$(CONFIG_IRQ_LOONGARCH_CPU) += irq-loongarch-cpu.o
obj-$(CONFIG_LOONGSON_LIOINTC) += irq-loongson-liointc.o
+obj-$(CONFIG_LOONGSON_EIOINTC) += irq-loongson-eiointc.o
obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o
obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o
obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o
obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
+obj-$(CONFIG_LOONGSON_PCH_LPC) += irq-loongson-pch-lpc.o
obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
obj-$(CONFIG_IRQ_IDT3243X) += irq-idt3243x.o
obj-$(CONFIG_APPLE_AIC) += irq-apple-aic.o
obj-$(CONFIG_MCHP_EIC) += irq-mchp-eic.o
+obj-$(CONFIG_SUNPLUS_SP7021_INTC) += irq-sp7021-intc.o
enabled = intc->cpus[old_cpu]->enable_cache[word] & mask;
if (enabled)
__bcm6345_l1_mask(d);
- cpumask_copy(irq_data_get_affinity_mask(d), dest);
+ irq_data_update_affinity(d, dest);
if (enabled)
__bcm6345_l1_unmask(d);
} else {
- cpumask_copy(irq_data_get_affinity_mask(d), dest);
+ irq_data_update_affinity(d, dest);
}
raw_spin_unlock_irqrestore(&intc->lock, flags);
* the security state of the GIC (controlled by the GICD_CTRL.DS bit)
* and if Group 0 interrupts can be delivered to Linux in the non-secure
* world as FIQs (controlled by the SCR_EL3.FIQ bit). These affect the
- * the ICC_PMR_EL1 register and the priority that software assigns to
+ * ICC_PMR_EL1 register and the priority that software assigns to
* interrupts:
*
* GICD_CTRL.DS | SCR_EL3.FIQ | ICC_PMR_EL1 | Group 1 priority
vgic_set_kvm_info(&gic_v3_kvm_info);
}
+static struct fwnode_handle *gsi_domain_handle;
+
+static struct fwnode_handle *gic_v3_get_gsi_domain_id(u32 gsi)
+{
+ return gsi_domain_handle;
+}
+
static int __init
gic_acpi_init(union acpi_subtable_headers *header, const unsigned long end)
{
struct acpi_madt_generic_distributor *dist;
- struct fwnode_handle *domain_handle;
size_t size;
int i, err;
if (err)
goto out_redist_unmap;
- domain_handle = irq_domain_alloc_fwnode(&dist->base_address);
- if (!domain_handle) {
+ gsi_domain_handle = irq_domain_alloc_fwnode(&dist->base_address);
+ if (!gsi_domain_handle) {
err = -ENOMEM;
goto out_redist_unmap;
}
err = gic_init_bases(acpi_data.dist_base, acpi_data.redist_regs,
- acpi_data.nr_redist_regions, 0, domain_handle);
+ acpi_data.nr_redist_regions, 0, gsi_domain_handle);
if (err)
goto out_fwhandle_free;
- acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+ acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, gic_v3_get_gsi_domain_id);
if (static_branch_likely(&supports_deactivate_key))
gic_acpi_setup_kvm_info();
return 0;
out_fwhandle_free:
- irq_domain_free_fwnode(domain_handle);
+ irq_domain_free_fwnode(gsi_domain_handle);
out_redist_unmap:
for (i = 0; i < acpi_data.nr_redist_regions; i++)
if (acpi_data.redist_regs[i].redist_base)
vgic_set_kvm_info(&gic_v2_kvm_info);
}
+static struct fwnode_handle *gsi_domain_handle;
+
+static struct fwnode_handle *gic_v2_get_gsi_domain_id(u32 gsi)
+{
+ return gsi_domain_handle;
+}
+
static int __init gic_v2_acpi_init(union acpi_subtable_headers *header,
const unsigned long end)
{
struct acpi_madt_generic_distributor *dist;
- struct fwnode_handle *domain_handle;
struct gic_chip_data *gic = &gic_data[0];
int count, ret;
/*
* Initialize GIC instance zero (no multi-GIC support).
*/
- domain_handle = irq_domain_alloc_fwnode(&dist->base_address);
- if (!domain_handle) {
+ gsi_domain_handle = irq_domain_alloc_fwnode(&dist->base_address);
+ if (!gsi_domain_handle) {
pr_err("Unable to allocate domain handle\n");
gic_teardown(gic);
return -ENOMEM;
}
- ret = __gic_init_bases(gic, domain_handle);
+ ret = __gic_init_bases(gic, gsi_domain_handle);
if (ret) {
pr_err("Failed to initialise GIC\n");
- irq_domain_free_fwnode(domain_handle);
+ irq_domain_free_fwnode(gsi_domain_handle);
gic_teardown(gic);
return ret;
}
- acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+ acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, gic_v2_get_gsi_domain_id);
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
gicv2m_init(NULL, gic_data[0].domain);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+
+#include <asm/loongarch.h>
+#include <asm/setup.h>
+
+static struct irq_domain *irq_domain;
+struct fwnode_handle *cpuintc_handle;
+
+static u32 lpic_gsi_to_irq(u32 gsi)
+{
+ /* Only pch irqdomain transferring is required for LoongArch. */
+ if (gsi >= GSI_MIN_PCH_IRQ && gsi <= GSI_MAX_PCH_IRQ)
+ return acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_HIGH);
+
+ return 0;
+}
+
+static struct fwnode_handle *lpic_get_gsi_domain_id(u32 gsi)
+{
+ int id;
+ struct fwnode_handle *domain_handle = NULL;
+
+ switch (gsi) {
+ case GSI_MIN_CPU_IRQ ... GSI_MAX_CPU_IRQ:
+ if (liointc_handle)
+ domain_handle = liointc_handle;
+ break;
+
+ case GSI_MIN_LPC_IRQ ... GSI_MAX_LPC_IRQ:
+ if (pch_lpc_handle)
+ domain_handle = pch_lpc_handle;
+ break;
+
+ case GSI_MIN_PCH_IRQ ... GSI_MAX_PCH_IRQ:
+ id = find_pch_pic(gsi);
+ if (id >= 0 && pch_pic_handle[id])
+ domain_handle = pch_pic_handle[id];
+ break;
+ }
+
+ return domain_handle;
+}
+
+static void mask_loongarch_irq(struct irq_data *d)
+{
+ clear_csr_ecfg(ECFGF(d->hwirq));
+}
+
+static void unmask_loongarch_irq(struct irq_data *d)
+{
+ set_csr_ecfg(ECFGF(d->hwirq));
+}
+
+static struct irq_chip cpu_irq_controller = {
+ .name = "CPUINTC",
+ .irq_mask = mask_loongarch_irq,
+ .irq_unmask = unmask_loongarch_irq,
+};
+
+static void handle_cpu_irq(struct pt_regs *regs)
+{
+ int hwirq;
+ unsigned int estat = read_csr_estat() & CSR_ESTAT_IS;
+
+ while ((hwirq = ffs(estat))) {
+ estat &= ~BIT(hwirq - 1);
+ generic_handle_domain_irq(irq_domain, hwirq - 1);
+ }
+}
+
+static int loongarch_cpu_intc_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_noprobe(irq);
+ irq_set_chip_and_handler(irq, &cpu_irq_controller, handle_percpu_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops loongarch_cpu_intc_irq_domain_ops = {
+ .map = loongarch_cpu_intc_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int __init
+liointc_parse_madt(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ struct acpi_madt_lio_pic *liointc_entry = (struct acpi_madt_lio_pic *)header;
+
+ return liointc_acpi_init(irq_domain, liointc_entry);
+}
+
+static int __init
+eiointc_parse_madt(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ struct acpi_madt_eio_pic *eiointc_entry = (struct acpi_madt_eio_pic *)header;
+
+ return eiointc_acpi_init(irq_domain, eiointc_entry);
+}
+
+static int __init acpi_cascade_irqdomain_init(void)
+{
+ acpi_table_parse_madt(ACPI_MADT_TYPE_LIO_PIC,
+ liointc_parse_madt, 0);
+ acpi_table_parse_madt(ACPI_MADT_TYPE_EIO_PIC,
+ eiointc_parse_madt, 0);
+ return 0;
+}
+
+static int __init cpuintc_acpi_init(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ if (irq_domain)
+ return 0;
+
+ /* Mask interrupts. */
+ clear_csr_ecfg(ECFG0_IM);
+ clear_csr_estat(ESTATF_IP);
+
+ cpuintc_handle = irq_domain_alloc_fwnode(NULL);
+ irq_domain = irq_domain_create_linear(cpuintc_handle, EXCCODE_INT_NUM,
+ &loongarch_cpu_intc_irq_domain_ops, NULL);
+
+ if (!irq_domain)
+ panic("Failed to add irqdomain for LoongArch CPU");
+
+ set_handle_irq(&handle_cpu_irq);
+ acpi_set_irq_model(ACPI_IRQ_MODEL_LPIC, lpic_get_gsi_domain_id);
+ acpi_set_gsi_to_irq_fallback(lpic_gsi_to_irq);
+ acpi_cascade_irqdomain_init();
+
+ return 0;
+}
+
+IRQCHIP_ACPI_DECLARE(cpuintc_v1, ACPI_MADT_TYPE_CORE_PIC,
+ NULL, ACPI_MADT_CORE_PIC_VERSION_V1, cpuintc_acpi_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson Extend I/O Interrupt Controller support
+ *
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#define pr_fmt(fmt) "eiointc: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#define EIOINTC_REG_NODEMAP 0x14a0
+#define EIOINTC_REG_IPMAP 0x14c0
+#define EIOINTC_REG_ENABLE 0x1600
+#define EIOINTC_REG_BOUNCE 0x1680
+#define EIOINTC_REG_ISR 0x1800
+#define EIOINTC_REG_ROUTE 0x1c00
+
+#define VEC_REG_COUNT 4
+#define VEC_COUNT_PER_REG 64
+#define VEC_COUNT (VEC_REG_COUNT * VEC_COUNT_PER_REG)
+#define VEC_REG_IDX(irq_id) ((irq_id) / VEC_COUNT_PER_REG)
+#define VEC_REG_BIT(irq_id) ((irq_id) % VEC_COUNT_PER_REG)
+#define EIOINTC_ALL_ENABLE 0xffffffff
+
+#define MAX_EIO_NODES (NR_CPUS / CORES_PER_EIO_NODE)
+
+static int nr_pics;
+
+struct eiointc_priv {
+ u32 node;
+ nodemask_t node_map;
+ cpumask_t cpuspan_map;
+ struct fwnode_handle *domain_handle;
+ struct irq_domain *eiointc_domain;
+};
+
+static struct eiointc_priv *eiointc_priv[MAX_IO_PICS];
+
+static void eiointc_enable(void)
+{
+ uint64_t misc;
+
+ misc = iocsr_read64(LOONGARCH_IOCSR_MISC_FUNC);
+ misc |= IOCSR_MISC_FUNC_EXT_IOI_EN;
+ iocsr_write64(misc, LOONGARCH_IOCSR_MISC_FUNC);
+}
+
+static int cpu_to_eio_node(int cpu)
+{
+ return cpu_logical_map(cpu) / CORES_PER_EIO_NODE;
+}
+
+static void eiointc_set_irq_route(int pos, unsigned int cpu, unsigned int mnode, nodemask_t *node_map)
+{
+ int i, node, cpu_node, route_node;
+ unsigned char coremap;
+ uint32_t pos_off, data, data_byte, data_mask;
+
+ pos_off = pos & ~3;
+ data_byte = pos & 3;
+ data_mask = ~BIT_MASK(data_byte) & 0xf;
+
+ /* Calculate node and coremap of target irq */
+ cpu_node = cpu_logical_map(cpu) / CORES_PER_EIO_NODE;
+ coremap = BIT(cpu_logical_map(cpu) % CORES_PER_EIO_NODE);
+
+ for_each_online_cpu(i) {
+ node = cpu_to_eio_node(i);
+ if (!node_isset(node, *node_map))
+ continue;
+
+ /* EIO node 0 is in charge of inter-node interrupt dispatch */
+ route_node = (node == mnode) ? cpu_node : node;
+ data = ((coremap | (route_node << 4)) << (data_byte * 8));
+ csr_any_send(EIOINTC_REG_ROUTE + pos_off, data, data_mask, node * CORES_PER_EIO_NODE);
+ }
+}
+
+static DEFINE_RAW_SPINLOCK(affinity_lock);
+
+static int eiointc_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, bool force)
+{
+ unsigned int cpu;
+ unsigned long flags;
+ uint32_t vector, regaddr;
+ struct cpumask intersect_affinity;
+ struct eiointc_priv *priv = d->domain->host_data;
+
+ raw_spin_lock_irqsave(&affinity_lock, flags);
+
+ cpumask_and(&intersect_affinity, affinity, cpu_online_mask);
+ cpumask_and(&intersect_affinity, &intersect_affinity, &priv->cpuspan_map);
+
+ if (cpumask_empty(&intersect_affinity)) {
+ raw_spin_unlock_irqrestore(&affinity_lock, flags);
+ return -EINVAL;
+ }
+ cpu = cpumask_first(&intersect_affinity);
+
+ vector = d->hwirq;
+ regaddr = EIOINTC_REG_ENABLE + ((vector >> 5) << 2);
+
+ /* Mask target vector */
+ csr_any_send(regaddr, EIOINTC_ALL_ENABLE & (~BIT(vector & 0x1F)), 0x0, 0);
+ /* Set route for target vector */
+ eiointc_set_irq_route(vector, cpu, priv->node, &priv->node_map);
+ /* Unmask target vector */
+ csr_any_send(regaddr, EIOINTC_ALL_ENABLE, 0x0, 0);
+
+ irq_data_update_effective_affinity(d, cpumask_of(cpu));
+
+ raw_spin_unlock_irqrestore(&affinity_lock, flags);
+
+ return IRQ_SET_MASK_OK;
+}
+
+static int eiointc_index(int node)
+{
+ int i;
+
+ for (i = 0; i < nr_pics; i++) {
+ if (node_isset(node, eiointc_priv[i]->node_map))
+ return i;
+ }
+
+ return -1;
+}
+
+static int eiointc_router_init(unsigned int cpu)
+{
+ int i, bit;
+ uint32_t data;
+ uint32_t node = cpu_to_eio_node(cpu);
+ uint32_t index = eiointc_index(node);
+
+ if (index < 0) {
+ pr_err("Error: invalid nodemap!\n");
+ return -1;
+ }
+
+ if ((cpu_logical_map(cpu) % CORES_PER_EIO_NODE) == 0) {
+ eiointc_enable();
+
+ for (i = 0; i < VEC_COUNT / 32; i++) {
+ data = (((1 << (i * 2 + 1)) << 16) | (1 << (i * 2)));
+ iocsr_write32(data, EIOINTC_REG_NODEMAP + i * 4);
+ }
+
+ for (i = 0; i < VEC_COUNT / 32 / 4; i++) {
+ bit = BIT(1 + index); /* Route to IP[1 + index] */
+ data = bit | (bit << 8) | (bit << 16) | (bit << 24);
+ iocsr_write32(data, EIOINTC_REG_IPMAP + i * 4);
+ }
+
+ for (i = 0; i < VEC_COUNT / 4; i++) {
+ /* Route to Node-0 Core-0 */
+ if (index == 0)
+ bit = BIT(cpu_logical_map(0));
+ else
+ bit = (eiointc_priv[index]->node << 4) | 1;
+
+ data = bit | (bit << 8) | (bit << 16) | (bit << 24);
+ iocsr_write32(data, EIOINTC_REG_ROUTE + i * 4);
+ }
+
+ for (i = 0; i < VEC_COUNT / 32; i++) {
+ data = 0xffffffff;
+ iocsr_write32(data, EIOINTC_REG_ENABLE + i * 4);
+ iocsr_write32(data, EIOINTC_REG_BOUNCE + i * 4);
+ }
+ }
+
+ return 0;
+}
+
+static void eiointc_irq_dispatch(struct irq_desc *desc)
+{
+ int i;
+ u64 pending;
+ bool handled = false;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct eiointc_priv *priv = irq_desc_get_handler_data(desc);
+
+ chained_irq_enter(chip, desc);
+
+ for (i = 0; i < VEC_REG_COUNT; i++) {
+ pending = iocsr_read64(EIOINTC_REG_ISR + (i << 3));
+ iocsr_write64(pending, EIOINTC_REG_ISR + (i << 3));
+ while (pending) {
+ int bit = __ffs(pending);
+ int irq = bit + VEC_COUNT_PER_REG * i;
+
+ generic_handle_domain_irq(priv->eiointc_domain, irq);
+ pending &= ~BIT(bit);
+ handled = true;
+ }
+ }
+
+ if (!handled)
+ spurious_interrupt();
+
+ chained_irq_exit(chip, desc);
+}
+
+static void eiointc_ack_irq(struct irq_data *d)
+{
+}
+
+static void eiointc_mask_irq(struct irq_data *d)
+{
+}
+
+static void eiointc_unmask_irq(struct irq_data *d)
+{
+}
+
+static struct irq_chip eiointc_irq_chip = {
+ .name = "EIOINTC",
+ .irq_ack = eiointc_ack_irq,
+ .irq_mask = eiointc_mask_irq,
+ .irq_unmask = eiointc_unmask_irq,
+ .irq_set_affinity = eiointc_set_irq_affinity,
+};
+
+static int eiointc_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int ret;
+ unsigned int i, type;
+ unsigned long hwirq = 0;
+ struct eiointc *priv = domain->host_data;
+
+ ret = irq_domain_translate_onecell(domain, arg, &hwirq, &type);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_info(domain, virq + i, hwirq + i, &eiointc_irq_chip,
+ priv, handle_edge_irq, NULL, NULL);
+ }
+
+ return 0;
+}
+
+static void eiointc_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ int i;
+
+ for (i = 0; i < nr_irqs; i++) {
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq + i);
+
+ irq_set_handler(virq + i, NULL);
+ irq_domain_reset_irq_data(d);
+ }
+}
+
+static const struct irq_domain_ops eiointc_domain_ops = {
+ .translate = irq_domain_translate_onecell,
+ .alloc = eiointc_domain_alloc,
+ .free = eiointc_domain_free,
+};
+
+static void acpi_set_vec_parent(int node, struct irq_domain *parent, struct acpi_vector_group *vec_group)
+{
+ int i;
+
+ if (cpu_has_flatmode)
+ node = cpu_to_node(node * CORES_PER_EIO_NODE);
+
+ for (i = 0; i < MAX_IO_PICS; i++) {
+ if (node == vec_group[i].node) {
+ vec_group[i].parent = parent;
+ return;
+ }
+ }
+}
+
+struct irq_domain *acpi_get_vec_parent(int node, struct acpi_vector_group *vec_group)
+{
+ int i;
+
+ for (i = 0; i < MAX_IO_PICS; i++) {
+ if (node == vec_group[i].node)
+ return vec_group[i].parent;
+ }
+ return NULL;
+}
+
+static int __init
+pch_pic_parse_madt(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ struct acpi_madt_bio_pic *pchpic_entry = (struct acpi_madt_bio_pic *)header;
+ unsigned int node = (pchpic_entry->address >> 44) & 0xf;
+ struct irq_domain *parent = acpi_get_vec_parent(node, pch_group);
+
+ if (parent)
+ return pch_pic_acpi_init(parent, pchpic_entry);
+
+ return -EINVAL;
+}
+
+static int __init
+pch_msi_parse_madt(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ struct acpi_madt_msi_pic *pchmsi_entry = (struct acpi_madt_msi_pic *)header;
+ struct irq_domain *parent = acpi_get_vec_parent(eiointc_priv[nr_pics - 1]->node, msi_group);
+
+ if (parent)
+ return pch_msi_acpi_init(parent, pchmsi_entry);
+
+ return -EINVAL;
+}
+
+static int __init acpi_cascade_irqdomain_init(void)
+{
+ acpi_table_parse_madt(ACPI_MADT_TYPE_BIO_PIC,
+ pch_pic_parse_madt, 0);
+ acpi_table_parse_madt(ACPI_MADT_TYPE_MSI_PIC,
+ pch_msi_parse_madt, 1);
+ return 0;
+}
+
+int __init eiointc_acpi_init(struct irq_domain *parent,
+ struct acpi_madt_eio_pic *acpi_eiointc)
+{
+ int i, parent_irq;
+ unsigned long node_map;
+ struct eiointc_priv *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->domain_handle = irq_domain_alloc_fwnode((phys_addr_t *)acpi_eiointc);
+ if (!priv->domain_handle) {
+ pr_err("Unable to allocate domain handle\n");
+ goto out_free_priv;
+ }
+
+ priv->node = acpi_eiointc->node;
+ node_map = acpi_eiointc->node_map ? : -1ULL;
+
+ for_each_possible_cpu(i) {
+ if (node_map & (1ULL << cpu_to_eio_node(i))) {
+ node_set(cpu_to_eio_node(i), priv->node_map);
+ cpumask_or(&priv->cpuspan_map, &priv->cpuspan_map, cpumask_of(i));
+ }
+ }
+
+ /* Setup IRQ domain */
+ priv->eiointc_domain = irq_domain_create_linear(priv->domain_handle, VEC_COUNT,
+ &eiointc_domain_ops, priv);
+ if (!priv->eiointc_domain) {
+ pr_err("loongson-eiointc: cannot add IRQ domain\n");
+ goto out_free_handle;
+ }
+
+ eiointc_priv[nr_pics++] = priv;
+
+ eiointc_router_init(0);
+
+ parent_irq = irq_create_mapping(parent, acpi_eiointc->cascade);
+ irq_set_chained_handler_and_data(parent_irq, eiointc_irq_dispatch, priv);
+
+ cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_LOONGARCH_STARTING,
+ "irqchip/loongarch/intc:starting",
+ eiointc_router_init, NULL);
+
+ acpi_set_vec_parent(acpi_eiointc->node, priv->eiointc_domain, pch_group);
+ acpi_set_vec_parent(acpi_eiointc->node, priv->eiointc_domain, msi_group);
+ acpi_cascade_irqdomain_init();
+
+ return 0;
+
+out_free_handle:
+ irq_domain_free_fwnode(priv->domain_handle);
+ priv->domain_handle = NULL;
+out_free_priv:
+ kfree(priv);
+
+ return -ENOMEM;
+}
#endif
#define LIOINTC_CHIP_IRQ 32
-#define LIOINTC_NUM_PARENT 4
+#define LIOINTC_NUM_PARENT 4
#define LIOINTC_NUM_CORES 4
#define LIOINTC_INTC_CHIP_START 0x20
bool has_lpc_irq_errata;
};
+struct fwnode_handle *liointc_handle;
+
static void liointc_chained_handle_irq(struct irq_desc *desc)
{
struct liointc_handler_data *handler = irq_desc_get_handler_data(desc);
irq_gc_unlock_irqrestore(gc, flags);
}
-static const char * const parent_names[] = {"int0", "int1", "int2", "int3"};
-static const char * const core_reg_names[] = {"isr0", "isr1", "isr2", "isr3"};
+static int parent_irq[LIOINTC_NUM_PARENT];
+static u32 parent_int_map[LIOINTC_NUM_PARENT];
+static const char *const parent_names[] = {"int0", "int1", "int2", "int3"};
+static const char *const core_reg_names[] = {"isr0", "isr1", "isr2", "isr3"};
-static void __iomem *liointc_get_reg_byname(struct device_node *node,
- const char *name)
+static int liointc_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
{
- int index = of_property_match_string(node, "reg-names", name);
-
- if (index < 0)
- return NULL;
-
- return of_iomap(node, index);
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+ *out_hwirq = intspec[0] - GSI_MIN_CPU_IRQ;
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
}
-static int __init liointc_of_init(struct device_node *node,
- struct device_node *parent)
+static const struct irq_domain_ops acpi_irq_gc_ops = {
+ .map = irq_map_generic_chip,
+ .unmap = irq_unmap_generic_chip,
+ .xlate = liointc_domain_xlate,
+};
+
+static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
+ struct fwnode_handle *domain_handle, struct device_node *node)
{
+ int i, err;
+ void __iomem *base;
+ struct irq_chip_type *ct;
struct irq_chip_generic *gc;
struct irq_domain *domain;
- struct irq_chip_type *ct;
struct liointc_priv *priv;
- void __iomem *base;
- u32 of_parent_int_map[LIOINTC_NUM_PARENT];
- int parent_irq[LIOINTC_NUM_PARENT];
- bool have_parent = FALSE;
- int sz, i, err = 0;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- if (of_device_is_compatible(node, "loongson,liointc-2.0")) {
- base = liointc_get_reg_byname(node, "main");
- if (!base) {
- err = -ENODEV;
- goto out_free_priv;
- }
+ base = ioremap(addr, size);
+ if (!base)
+ goto out_free_priv;
- for (i = 0; i < LIOINTC_NUM_CORES; i++)
- priv->core_isr[i] = liointc_get_reg_byname(node, core_reg_names[i]);
- if (!priv->core_isr[0]) {
- err = -ENODEV;
- goto out_iounmap_base;
- }
- } else {
- base = of_iomap(node, 0);
- if (!base) {
- err = -ENODEV;
- goto out_free_priv;
- }
+ for (i = 0; i < LIOINTC_NUM_CORES; i++)
+ priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
- for (i = 0; i < LIOINTC_NUM_CORES; i++)
- priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
- }
+ for (i = 0; i < LIOINTC_NUM_PARENT; i++)
+ priv->handler[i].parent_int_map = parent_int_map[i];
- for (i = 0; i < LIOINTC_NUM_PARENT; i++) {
- parent_irq[i] = of_irq_get_byname(node, parent_names[i]);
- if (parent_irq[i] > 0)
- have_parent = TRUE;
- }
- if (!have_parent) {
- err = -ENODEV;
- goto out_iounmap_isr;
- }
+ if (revision > 1) {
+ for (i = 0; i < LIOINTC_NUM_CORES; i++) {
+ int index = of_property_match_string(node,
+ "reg-names", core_reg_names[i]);
- sz = of_property_read_variable_u32_array(node,
- "loongson,parent_int_map",
- &of_parent_int_map[0],
- LIOINTC_NUM_PARENT,
- LIOINTC_NUM_PARENT);
- if (sz < 4) {
- pr_err("loongson-liointc: No parent_int_map\n");
- err = -ENODEV;
- goto out_iounmap_isr;
- }
+ if (index < 0)
+ return -EINVAL;
- for (i = 0; i < LIOINTC_NUM_PARENT; i++)
- priv->handler[i].parent_int_map = of_parent_int_map[i];
+ priv->core_isr[i] = of_iomap(node, index);
+ }
+ }
/* Setup IRQ domain */
- domain = irq_domain_add_linear(node, 32,
+ if (!acpi_disabled)
+ domain = irq_domain_create_linear(domain_handle, LIOINTC_CHIP_IRQ,
+ &acpi_irq_gc_ops, priv);
+ else
+ domain = irq_domain_create_linear(domain_handle, LIOINTC_CHIP_IRQ,
&irq_generic_chip_ops, priv);
if (!domain) {
pr_err("loongson-liointc: cannot add IRQ domain\n");
- err = -EINVAL;
- goto out_iounmap_isr;
+ goto out_iounmap;
}
- err = irq_alloc_domain_generic_chips(domain, 32, 1,
- node->full_name, handle_level_irq,
- IRQ_NOPROBE, 0, 0);
+ err = irq_alloc_domain_generic_chips(domain, LIOINTC_CHIP_IRQ, 1,
+ (node ? node->full_name : "LIOINTC"),
+ handle_level_irq, 0, IRQ_NOPROBE, 0);
if (err) {
pr_err("loongson-liointc: unable to register IRQ domain\n");
goto out_free_domain;
liointc_chained_handle_irq, &priv->handler[i]);
}
+ liointc_handle = domain_handle;
return 0;
out_free_domain:
irq_domain_remove(domain);
-out_iounmap_isr:
- for (i = 0; i < LIOINTC_NUM_CORES; i++) {
- if (!priv->core_isr[i])
- continue;
- iounmap(priv->core_isr[i]);
- }
-out_iounmap_base:
+out_iounmap:
iounmap(base);
out_free_priv:
kfree(priv);
- return err;
+ return -EINVAL;
+}
+
+#ifdef CONFIG_OF
+
+static int __init liointc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ bool have_parent = FALSE;
+ int sz, i, index, revision, err = 0;
+ struct resource res;
+
+ if (!of_device_is_compatible(node, "loongson,liointc-2.0")) {
+ index = 0;
+ revision = 1;
+ } else {
+ index = of_property_match_string(node, "reg-names", "main");
+ revision = 2;
+ }
+
+ if (of_address_to_resource(node, index, &res))
+ return -EINVAL;
+
+ for (i = 0; i < LIOINTC_NUM_PARENT; i++) {
+ parent_irq[i] = of_irq_get_byname(node, parent_names[i]);
+ if (parent_irq[i] > 0)
+ have_parent = TRUE;
+ }
+ if (!have_parent)
+ return -ENODEV;
+
+ sz = of_property_read_variable_u32_array(node,
+ "loongson,parent_int_map",
+ &parent_int_map[0],
+ LIOINTC_NUM_PARENT,
+ LIOINTC_NUM_PARENT);
+ if (sz < 4) {
+ pr_err("loongson-liointc: No parent_int_map\n");
+ return -ENODEV;
+ }
+
+ err = liointc_init(res.start, resource_size(&res),
+ revision, of_node_to_fwnode(node), node);
+ if (err < 0)
+ return err;
+
+ return 0;
}
IRQCHIP_DECLARE(loongson_liointc_1_0, "loongson,liointc-1.0", liointc_of_init);
IRQCHIP_DECLARE(loongson_liointc_1_0a, "loongson,liointc-1.0a", liointc_of_init);
IRQCHIP_DECLARE(loongson_liointc_2_0, "loongson,liointc-2.0", liointc_of_init);
+
+#endif
+
+#ifdef CONFIG_ACPI
+int __init liointc_acpi_init(struct irq_domain *parent, struct acpi_madt_lio_pic *acpi_liointc)
+{
+ int ret;
+ struct fwnode_handle *domain_handle;
+
+ parent_int_map[0] = acpi_liointc->cascade_map[0];
+ parent_int_map[1] = acpi_liointc->cascade_map[1];
+
+ parent_irq[0] = irq_create_mapping(parent, acpi_liointc->cascade[0]);
+ parent_irq[1] = irq_create_mapping(parent, acpi_liointc->cascade[1]);
+
+ domain_handle = irq_domain_alloc_fwnode((phys_addr_t *)acpi_liointc);
+ if (!domain_handle) {
+ pr_err("Unable to allocate domain handle\n");
+ return -ENOMEM;
+ }
+ ret = liointc_init(acpi_liointc->address, acpi_liointc->size,
+ 1, domain_handle, NULL);
+ if (ret)
+ irq_domain_free_fwnode(domain_handle);
+
+ return ret;
+}
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson LPC Interrupt Controller support
+ *
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#define pr_fmt(fmt) "lpc: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+
+/* Registers */
+#define LPC_INT_CTL 0x00
+#define LPC_INT_ENA 0x04
+#define LPC_INT_STS 0x08
+#define LPC_INT_CLR 0x0c
+#define LPC_INT_POL 0x10
+#define LPC_COUNT 16
+
+/* LPC_INT_CTL */
+#define LPC_INT_CTL_EN BIT(31)
+
+struct pch_lpc {
+ void __iomem *base;
+ struct irq_domain *lpc_domain;
+ raw_spinlock_t lpc_lock;
+ u32 saved_reg_ctl;
+ u32 saved_reg_ena;
+ u32 saved_reg_pol;
+};
+
+struct fwnode_handle *pch_lpc_handle;
+
+static void lpc_irq_ack(struct irq_data *d)
+{
+ unsigned long flags;
+ struct pch_lpc *priv = d->domain->host_data;
+
+ raw_spin_lock_irqsave(&priv->lpc_lock, flags);
+ writel(0x1 << d->hwirq, priv->base + LPC_INT_CLR);
+ raw_spin_unlock_irqrestore(&priv->lpc_lock, flags);
+}
+
+static void lpc_irq_mask(struct irq_data *d)
+{
+ unsigned long flags;
+ struct pch_lpc *priv = d->domain->host_data;
+
+ raw_spin_lock_irqsave(&priv->lpc_lock, flags);
+ writel(readl(priv->base + LPC_INT_ENA) & (~(0x1 << (d->hwirq))),
+ priv->base + LPC_INT_ENA);
+ raw_spin_unlock_irqrestore(&priv->lpc_lock, flags);
+}
+
+static void lpc_irq_unmask(struct irq_data *d)
+{
+ unsigned long flags;
+ struct pch_lpc *priv = d->domain->host_data;
+
+ raw_spin_lock_irqsave(&priv->lpc_lock, flags);
+ writel(readl(priv->base + LPC_INT_ENA) | (0x1 << (d->hwirq)),
+ priv->base + LPC_INT_ENA);
+ raw_spin_unlock_irqrestore(&priv->lpc_lock, flags);
+}
+
+static int lpc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ u32 val;
+ u32 mask = 0x1 << (d->hwirq);
+ struct pch_lpc *priv = d->domain->host_data;
+
+ if (!(type & IRQ_TYPE_LEVEL_MASK))
+ return 0;
+
+ val = readl(priv->base + LPC_INT_POL);
+
+ if (type == IRQ_TYPE_LEVEL_HIGH)
+ val |= mask;
+ else
+ val &= ~mask;
+
+ writel(val, priv->base + LPC_INT_POL);
+
+ return 0;
+}
+
+static const struct irq_chip pch_lpc_irq_chip = {
+ .name = "PCH LPC",
+ .irq_mask = lpc_irq_mask,
+ .irq_unmask = lpc_irq_unmask,
+ .irq_ack = lpc_irq_ack,
+ .irq_set_type = lpc_irq_set_type,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+static void lpc_irq_dispatch(struct irq_desc *desc)
+{
+ u32 pending, bit;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct pch_lpc *priv = irq_desc_get_handler_data(desc);
+
+ chained_irq_enter(chip, desc);
+
+ pending = readl(priv->base + LPC_INT_ENA);
+ pending &= readl(priv->base + LPC_INT_STS);
+ if (!pending)
+ spurious_interrupt();
+
+ while (pending) {
+ bit = __ffs(pending);
+
+ generic_handle_domain_irq(priv->lpc_domain, bit);
+ pending &= ~BIT(bit);
+ }
+ chained_irq_exit(chip, desc);
+}
+
+static int pch_lpc_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &pch_lpc_irq_chip, handle_level_irq);
+ return 0;
+}
+
+static const struct irq_domain_ops pch_lpc_domain_ops = {
+ .map = pch_lpc_map,
+ .translate = irq_domain_translate_twocell,
+};
+
+static void pch_lpc_reset(struct pch_lpc *priv)
+{
+ /* Enable the LPC interrupt, bit31: en bit30: edge */
+ writel(LPC_INT_CTL_EN, priv->base + LPC_INT_CTL);
+ writel(0, priv->base + LPC_INT_ENA);
+ /* Clear all 18-bit interrpt bit */
+ writel(GENMASK(17, 0), priv->base + LPC_INT_CLR);
+}
+
+static int pch_lpc_disabled(struct pch_lpc *priv)
+{
+ return (readl(priv->base + LPC_INT_ENA) == 0xffffffff) &&
+ (readl(priv->base + LPC_INT_STS) == 0xffffffff);
+}
+
+int __init pch_lpc_acpi_init(struct irq_domain *parent,
+ struct acpi_madt_lpc_pic *acpi_pchlpc)
+{
+ int parent_irq;
+ struct pch_lpc *priv;
+ struct irq_fwspec fwspec;
+ struct fwnode_handle *irq_handle;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ raw_spin_lock_init(&priv->lpc_lock);
+
+ priv->base = ioremap(acpi_pchlpc->address, acpi_pchlpc->size);
+ if (!priv->base)
+ goto free_priv;
+
+ if (pch_lpc_disabled(priv)) {
+ pr_err("Failed to get LPC status\n");
+ goto iounmap_base;
+ }
+
+ irq_handle = irq_domain_alloc_named_fwnode("lpcintc");
+ if (!irq_handle) {
+ pr_err("Unable to allocate domain handle\n");
+ goto iounmap_base;
+ }
+
+ priv->lpc_domain = irq_domain_create_linear(irq_handle, LPC_COUNT,
+ &pch_lpc_domain_ops, priv);
+ if (!priv->lpc_domain) {
+ pr_err("Failed to create IRQ domain\n");
+ goto free_irq_handle;
+ }
+ pch_lpc_reset(priv);
+
+ fwspec.fwnode = parent->fwnode;
+ fwspec.param[0] = acpi_pchlpc->cascade + GSI_MIN_PCH_IRQ;
+ fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
+ fwspec.param_count = 2;
+ parent_irq = irq_create_fwspec_mapping(&fwspec);
+ irq_set_chained_handler_and_data(parent_irq, lpc_irq_dispatch, priv);
+
+ pch_lpc_handle = irq_handle;
+ return 0;
+
+free_irq_handle:
+ irq_domain_free_fwnode(irq_handle);
+iounmap_base:
+ iounmap(priv->base);
+free_priv:
+ kfree(priv);
+
+ return -ENOMEM;
+}
#include <linux/pci.h>
#include <linux/slab.h>
+static int nr_pics;
+
struct pch_msi_data {
struct mutex msi_map_lock;
phys_addr_t doorbell;
unsigned long *msi_map;
};
+static struct fwnode_handle *pch_msi_handle[MAX_IO_PICS];
+
static void pch_msi_mask_msi_irq(struct irq_data *d)
{
pci_msi_mask_irq(d);
};
static int pch_msi_init_domains(struct pch_msi_data *priv,
- struct device_node *node,
- struct irq_domain *parent)
+ struct irq_domain *parent,
+ struct fwnode_handle *domain_handle)
{
struct irq_domain *middle_domain, *msi_domain;
- middle_domain = irq_domain_create_linear(of_node_to_fwnode(node),
+ middle_domain = irq_domain_create_linear(domain_handle,
priv->num_irqs,
&pch_msi_middle_domain_ops,
priv);
middle_domain->parent = parent;
irq_domain_update_bus_token(middle_domain, DOMAIN_BUS_NEXUS);
- msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
+ msi_domain = pci_msi_create_irq_domain(domain_handle,
&pch_msi_domain_info,
middle_domain);
if (!msi_domain) {
return 0;
}
-static int pch_msi_init(struct device_node *node,
- struct device_node *parent)
+static int pch_msi_init(phys_addr_t msg_address, int irq_base, int irq_count,
+ struct irq_domain *parent_domain, struct fwnode_handle *domain_handle)
{
- struct pch_msi_data *priv;
- struct irq_domain *parent_domain;
- struct resource res;
int ret;
-
- parent_domain = irq_find_host(parent);
- if (!parent_domain) {
- pr_err("Failed to find the parent domain\n");
- return -ENXIO;
- }
+ struct pch_msi_data *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
mutex_init(&priv->msi_map_lock);
- ret = of_address_to_resource(node, 0, &res);
- if (ret) {
- pr_err("Failed to allocate resource\n");
- goto err_priv;
- }
-
- priv->doorbell = res.start;
-
- if (of_property_read_u32(node, "loongson,msi-base-vec",
- &priv->irq_first)) {
- pr_err("Unable to parse MSI vec base\n");
- ret = -EINVAL;
- goto err_priv;
- }
-
- if (of_property_read_u32(node, "loongson,msi-num-vecs",
- &priv->num_irqs)) {
- pr_err("Unable to parse MSI vec number\n");
- ret = -EINVAL;
- goto err_priv;
- }
+ priv->doorbell = msg_address;
+ priv->irq_first = irq_base;
+ priv->num_irqs = irq_count;
priv->msi_map = bitmap_zalloc(priv->num_irqs, GFP_KERNEL);
- if (!priv->msi_map) {
- ret = -ENOMEM;
+ if (!priv->msi_map)
goto err_priv;
- }
pr_debug("Registering %d MSIs, starting at %d\n",
priv->num_irqs, priv->irq_first);
- ret = pch_msi_init_domains(priv, node, parent_domain);
+ ret = pch_msi_init_domains(priv, parent_domain, domain_handle);
if (ret)
goto err_map;
+ pch_msi_handle[nr_pics++] = domain_handle;
return 0;
err_map:
bitmap_free(priv->msi_map);
err_priv:
kfree(priv);
- return ret;
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_OF
+static int pch_msi_of_init(struct device_node *node, struct device_node *parent)
+{
+ int err;
+ int irq_base, irq_count;
+ struct resource res;
+ struct irq_domain *parent_domain;
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("Failed to find the parent domain\n");
+ return -ENXIO;
+ }
+
+ if (of_address_to_resource(node, 0, &res)) {
+ pr_err("Failed to allocate resource\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "loongson,msi-base-vec", &irq_base)) {
+ pr_err("Unable to parse MSI vec base\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "loongson,msi-num-vecs", &irq_count)) {
+ pr_err("Unable to parse MSI vec number\n");
+ return -EINVAL;
+ }
+
+ err = pch_msi_init(res.start, irq_base, irq_count, parent_domain, of_node_to_fwnode(node));
+ if (err < 0)
+ return err;
+
+ return 0;
}
-IRQCHIP_DECLARE(pch_msi, "loongson,pch-msi-1.0", pch_msi_init);
+IRQCHIP_DECLARE(pch_msi, "loongson,pch-msi-1.0", pch_msi_of_init);
+#endif
+
+#ifdef CONFIG_ACPI
+struct fwnode_handle *get_pch_msi_handle(int pci_segment)
+{
+ int i;
+
+ for (i = 0; i < MAX_IO_PICS; i++) {
+ if (msi_group[i].pci_segment == pci_segment)
+ return pch_msi_handle[i];
+ }
+ return NULL;
+}
+
+int __init pch_msi_acpi_init(struct irq_domain *parent,
+ struct acpi_madt_msi_pic *acpi_pchmsi)
+{
+ int ret;
+ struct fwnode_handle *domain_handle;
+
+ domain_handle = irq_domain_alloc_fwnode((phys_addr_t *)acpi_pchmsi);
+ ret = pch_msi_init(acpi_pchmsi->msg_address, acpi_pchmsi->start,
+ acpi_pchmsi->count, parent, domain_handle);
+ if (ret < 0)
+ irq_domain_free_fwnode(domain_handle);
+
+ return ret;
+}
+#endif
#define PIC_REG_IDX(irq_id) ((irq_id) / PIC_COUNT_PER_REG)
#define PIC_REG_BIT(irq_id) ((irq_id) % PIC_COUNT_PER_REG)
+static int nr_pics;
+
struct pch_pic {
void __iomem *base;
struct irq_domain *pic_domain;
u32 ht_vec_base;
raw_spinlock_t pic_lock;
+ u32 vec_count;
+ u32 gsi_base;
};
+static struct pch_pic *pch_pic_priv[MAX_IO_PICS];
+
+struct fwnode_handle *pch_pic_handle[MAX_IO_PICS];
+
+int find_pch_pic(u32 gsi)
+{
+ int i;
+
+ /* Find the PCH_PIC that manages this GSI. */
+ for (i = 0; i < MAX_IO_PICS; i++) {
+ struct pch_pic *priv = pch_pic_priv[i];
+
+ if (!priv)
+ return -1;
+
+ if (gsi >= priv->gsi_base && gsi < (priv->gsi_base + priv->vec_count))
+ return i;
+ }
+
+ pr_err("ERROR: Unable to locate PCH_PIC for GSI %d\n", gsi);
+ return -1;
+}
+
static void pch_pic_bitset(struct pch_pic *priv, int offset, int bit)
{
u32 reg;
.irq_set_type = pch_pic_set_type,
};
+static int pch_pic_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct pch_pic *priv = d->host_data;
+ struct device_node *of_node = to_of_node(fwspec->fwnode);
+
+ if (fwspec->param_count < 1)
+ return -EINVAL;
+
+ if (of_node) {
+ *hwirq = fwspec->param[0] + priv->ht_vec_base;
+ *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+ } else {
+ *hwirq = fwspec->param[0] - priv->gsi_base;
+ *type = IRQ_TYPE_NONE;
+ }
+
+ return 0;
+}
+
static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *arg)
{
struct irq_fwspec parent_fwspec;
struct pch_pic *priv = domain->host_data;
- err = irq_domain_translate_twocell(domain, fwspec, &hwirq, &type);
+ err = pch_pic_domain_translate(domain, fwspec, &hwirq, &type);
if (err)
return err;
parent_fwspec.fwnode = domain->parent->fwnode;
parent_fwspec.param_count = 1;
- parent_fwspec.param[0] = hwirq + priv->ht_vec_base;
+ parent_fwspec.param[0] = hwirq;
err = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
if (err)
}
static const struct irq_domain_ops pch_pic_domain_ops = {
- .translate = irq_domain_translate_twocell,
+ .translate = pch_pic_domain_translate,
.alloc = pch_pic_alloc,
.free = irq_domain_free_irqs_parent,
};
int i;
for (i = 0; i < PIC_COUNT; i++) {
- /* Write vectored ID */
+ /* Write vector ID */
writeb(priv->ht_vec_base + i, priv->base + PCH_INT_HTVEC(i));
/* Hardcode route to HT0 Lo */
writeb(1, priv->base + PCH_INT_ROUTE(i));
}
}
-static int pch_pic_of_init(struct device_node *node,
- struct device_node *parent)
+static int pch_pic_init(phys_addr_t addr, unsigned long size, int vec_base,
+ struct irq_domain *parent_domain, struct fwnode_handle *domain_handle,
+ u32 gsi_base)
{
struct pch_pic *priv;
- struct irq_domain *parent_domain;
- int err;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
raw_spin_lock_init(&priv->pic_lock);
- priv->base = of_iomap(node, 0);
- if (!priv->base) {
- err = -ENOMEM;
+ priv->base = ioremap(addr, size);
+ if (!priv->base)
goto free_priv;
- }
- parent_domain = irq_find_host(parent);
- if (!parent_domain) {
- pr_err("Failed to find the parent domain\n");
- err = -ENXIO;
- goto iounmap_base;
- }
-
- if (of_property_read_u32(node, "loongson,pic-base-vec",
- &priv->ht_vec_base)) {
- pr_err("Failed to determine pic-base-vec\n");
- err = -EINVAL;
- goto iounmap_base;
- }
+ priv->ht_vec_base = vec_base;
+ priv->vec_count = ((readq(priv->base) >> 48) & 0xff) + 1;
+ priv->gsi_base = gsi_base;
priv->pic_domain = irq_domain_create_hierarchy(parent_domain, 0,
- PIC_COUNT,
- of_node_to_fwnode(node),
- &pch_pic_domain_ops,
- priv);
+ priv->vec_count, domain_handle,
+ &pch_pic_domain_ops, priv);
+
if (!priv->pic_domain) {
pr_err("Failed to create IRQ domain\n");
- err = -ENOMEM;
goto iounmap_base;
}
pch_pic_reset(priv);
+ pch_pic_handle[nr_pics] = domain_handle;
+ pch_pic_priv[nr_pics++] = priv;
return 0;
free_priv:
kfree(priv);
- return err;
+ return -EINVAL;
+}
+
+#ifdef CONFIG_OF
+
+static int pch_pic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int err, vec_base;
+ struct resource res;
+ struct irq_domain *parent_domain;
+
+ if (of_address_to_resource(node, 0, &res))
+ return -EINVAL;
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("Failed to find the parent domain\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(node, "loongson,pic-base-vec", &vec_base)) {
+ pr_err("Failed to determine pic-base-vec\n");
+ return -EINVAL;
+ }
+
+ err = pch_pic_init(res.start, resource_size(&res), vec_base,
+ parent_domain, of_node_to_fwnode(node), 0);
+ if (err < 0)
+ return err;
+
+ return 0;
}
IRQCHIP_DECLARE(pch_pic, "loongson,pch-pic-1.0", pch_pic_of_init);
+
+#endif
+
+#ifdef CONFIG_ACPI
+static int __init
+pch_lpc_parse_madt(union acpi_subtable_headers *header,
+ const unsigned long end)
+{
+ struct acpi_madt_lpc_pic *pchlpc_entry = (struct acpi_madt_lpc_pic *)header;
+
+ return pch_lpc_acpi_init(pch_pic_priv[0]->pic_domain, pchlpc_entry);
+}
+
+static int __init acpi_cascade_irqdomain_init(void)
+{
+ acpi_table_parse_madt(ACPI_MADT_TYPE_LPC_PIC,
+ pch_lpc_parse_madt, 0);
+ return 0;
+}
+
+int __init pch_pic_acpi_init(struct irq_domain *parent,
+ struct acpi_madt_bio_pic *acpi_pchpic)
+{
+ int ret, vec_base;
+ struct fwnode_handle *domain_handle;
+
+ vec_base = acpi_pchpic->gsi_base - GSI_MIN_PCH_IRQ;
+
+ domain_handle = irq_domain_alloc_fwnode((phys_addr_t *)acpi_pchpic);
+ if (!domain_handle) {
+ pr_err("Unable to allocate domain handle\n");
+ return -ENOMEM;
+ }
+
+ ret = pch_pic_init(acpi_pchpic->address, acpi_pchpic->size,
+ vec_base, parent, domain_handle, acpi_pchpic->gsi_base);
+
+ if (ret < 0) {
+ irq_domain_free_fwnode(domain_handle);
+ return ret;
+ }
+
+ if (acpi_pchpic->id == 0)
+ acpi_cascade_irqdomain_init();
+
+ return ret;
+}
+#endif
static DEFINE_SPINLOCK(gic_lock);
static struct irq_domain *gic_irq_domain;
-static struct irq_domain *gic_ipi_domain;
static int gic_shared_intrs;
static unsigned int gic_cpu_pin;
static unsigned int timer_cpu_pin;
static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
+
+#ifdef CONFIG_GENERIC_IRQ_IPI
static DECLARE_BITMAP(ipi_resrv, GIC_MAX_INTRS);
static DECLARE_BITMAP(ipi_available, GIC_MAX_INTRS);
+#endif /* CONFIG_GENERIC_IRQ_IPI */
static struct gic_all_vpes_chip_data {
u32 map;
u32 map;
if (hwirq >= GIC_SHARED_HWIRQ_BASE) {
+#ifdef CONFIG_GENERIC_IRQ_IPI
/* verify that shared irqs don't conflict with an IPI irq */
if (test_bit(GIC_HWIRQ_TO_SHARED(hwirq), ipi_resrv))
return -EBUSY;
+#endif /* CONFIG_GENERIC_IRQ_IPI */
err = irq_domain_set_hwirq_and_chip(d, virq, hwirq,
&gic_level_irq_controller,
.map = gic_irq_domain_map,
};
+#ifdef CONFIG_GENERIC_IRQ_IPI
+
static int gic_ipi_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
.match = gic_ipi_domain_match,
};
+static int gic_register_ipi_domain(struct device_node *node)
+{
+ struct irq_domain *gic_ipi_domain;
+ unsigned int v[2], num_ipis;
+
+ gic_ipi_domain = irq_domain_add_hierarchy(gic_irq_domain,
+ IRQ_DOMAIN_FLAG_IPI_PER_CPU,
+ GIC_NUM_LOCAL_INTRS + gic_shared_intrs,
+ node, &gic_ipi_domain_ops, NULL);
+ if (!gic_ipi_domain) {
+ pr_err("Failed to add IPI domain");
+ return -ENXIO;
+ }
+
+ irq_domain_update_bus_token(gic_ipi_domain, DOMAIN_BUS_IPI);
+
+ if (node &&
+ !of_property_read_u32_array(node, "mti,reserved-ipi-vectors", v, 2)) {
+ bitmap_set(ipi_resrv, v[0], v[1]);
+ } else {
+ /*
+ * Reserve 2 interrupts per possible CPU/VP for use as IPIs,
+ * meeting the requirements of arch/mips SMP.
+ */
+ num_ipis = 2 * num_possible_cpus();
+ bitmap_set(ipi_resrv, gic_shared_intrs - num_ipis, num_ipis);
+ }
+
+ bitmap_copy(ipi_available, ipi_resrv, GIC_MAX_INTRS);
+
+ return 0;
+}
+
+#else /* !CONFIG_GENERIC_IRQ_IPI */
+
+static inline int gic_register_ipi_domain(struct device_node *node)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_GENERIC_IRQ_IPI */
+
static int gic_cpu_startup(unsigned int cpu)
{
/* Enable or disable EIC */
static int __init gic_of_init(struct device_node *node,
struct device_node *parent)
{
- unsigned int cpu_vec, i, gicconfig, v[2], num_ipis;
+ unsigned int cpu_vec, i, gicconfig;
unsigned long reserved;
phys_addr_t gic_base;
struct resource res;
size_t gic_len;
+ int ret;
/* Find the first available CPU vector. */
i = 0;
}
mips_gic_base = ioremap(gic_base, gic_len);
+ if (!mips_gic_base) {
+ pr_err("Failed to ioremap gic_base\n");
+ return -ENOMEM;
+ }
gicconfig = read_gic_config();
gic_shared_intrs = FIELD_GET(GIC_CONFIG_NUMINTERRUPTS, gicconfig);
return -ENXIO;
}
- gic_ipi_domain = irq_domain_add_hierarchy(gic_irq_domain,
- IRQ_DOMAIN_FLAG_IPI_PER_CPU,
- GIC_NUM_LOCAL_INTRS + gic_shared_intrs,
- node, &gic_ipi_domain_ops, NULL);
- if (!gic_ipi_domain) {
- pr_err("Failed to add IPI domain");
- return -ENXIO;
- }
-
- irq_domain_update_bus_token(gic_ipi_domain, DOMAIN_BUS_IPI);
-
- if (node &&
- !of_property_read_u32_array(node, "mti,reserved-ipi-vectors", v, 2)) {
- bitmap_set(ipi_resrv, v[0], v[1]);
- } else {
- /*
- * Reserve 2 interrupts per possible CPU/VP for use as IPIs,
- * meeting the requirements of arch/mips SMP.
- */
- num_ipis = 2 * num_possible_cpus();
- bitmap_set(ipi_resrv, gic_shared_intrs - num_ipis, num_ipis);
- }
-
- bitmap_copy(ipi_available, ipi_resrv, GIC_MAX_INTRS);
+ ret = gic_register_ipi_domain(node);
+ if (ret)
+ return ret;
board_bind_eic_interrupt = &gic_bind_eic_interrupt;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L IRQC Driver
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation.
+ *
+ * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define IRQC_IRQ_START 1
+#define IRQC_IRQ_COUNT 8
+#define IRQC_TINT_START (IRQC_IRQ_START + IRQC_IRQ_COUNT)
+#define IRQC_TINT_COUNT 32
+#define IRQC_NUM_IRQ (IRQC_TINT_START + IRQC_TINT_COUNT)
+
+#define ISCR 0x10
+#define IITSR 0x14
+#define TSCR 0x20
+#define TITSR0 0x24
+#define TITSR1 0x28
+#define TITSR0_MAX_INT 16
+#define TITSEL_WIDTH 0x2
+#define TSSR(n) (0x30 + ((n) * 4))
+#define TIEN BIT(7)
+#define TSSEL_SHIFT(n) (8 * (n))
+#define TSSEL_MASK GENMASK(7, 0)
+#define IRQ_MASK 0x3
+
+#define TSSR_OFFSET(n) ((n) % 4)
+#define TSSR_INDEX(n) ((n) / 4)
+
+#define TITSR_TITSEL_EDGE_RISING 0
+#define TITSR_TITSEL_EDGE_FALLING 1
+#define TITSR_TITSEL_LEVEL_HIGH 2
+#define TITSR_TITSEL_LEVEL_LOW 3
+
+#define IITSR_IITSEL(n, sense) ((sense) << ((n) * 2))
+#define IITSR_IITSEL_LEVEL_LOW 0
+#define IITSR_IITSEL_EDGE_FALLING 1
+#define IITSR_IITSEL_EDGE_RISING 2
+#define IITSR_IITSEL_EDGE_BOTH 3
+#define IITSR_IITSEL_MASK(n) IITSR_IITSEL((n), 3)
+
+#define TINT_EXTRACT_HWIRQ(x) FIELD_GET(GENMASK(15, 0), (x))
+#define TINT_EXTRACT_GPIOINT(x) FIELD_GET(GENMASK(31, 16), (x))
+
+struct rzg2l_irqc_priv {
+ void __iomem *base;
+ struct irq_fwspec fwspec[IRQC_NUM_IRQ];
+ raw_spinlock_t lock;
+};
+
+static struct rzg2l_irqc_priv *irq_data_to_priv(struct irq_data *data)
+{
+ return data->domain->host_data;
+}
+
+static void rzg2l_irq_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ u32 bit = BIT(hw_irq);
+ u32 reg;
+
+ reg = readl_relaxed(priv->base + ISCR);
+ if (reg & bit)
+ writel_relaxed(reg & ~bit, priv->base + ISCR);
+}
+
+static void rzg2l_tint_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_TINT_START;
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ u32 bit = BIT(hw_irq);
+ u32 reg;
+
+ reg = readl_relaxed(priv->base + TSCR);
+ if (reg & bit)
+ writel_relaxed(reg & ~bit, priv->base + TSCR);
+}
+
+static void rzg2l_irqc_eoi(struct irq_data *d)
+{
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ unsigned int hw_irq = irqd_to_hwirq(d);
+
+ raw_spin_lock(&priv->lock);
+ if (hw_irq >= IRQC_IRQ_START && hw_irq <= IRQC_IRQ_COUNT)
+ rzg2l_irq_eoi(d);
+ else if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ)
+ rzg2l_tint_eoi(d);
+ raw_spin_unlock(&priv->lock);
+ irq_chip_eoi_parent(d);
+}
+
+static void rzg2l_irqc_irq_disable(struct irq_data *d)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d);
+
+ if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ) {
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ u32 offset = hw_irq - IRQC_TINT_START;
+ u32 tssr_offset = TSSR_OFFSET(offset);
+ u8 tssr_index = TSSR_INDEX(offset);
+ u32 reg;
+
+ raw_spin_lock(&priv->lock);
+ reg = readl_relaxed(priv->base + TSSR(tssr_index));
+ reg &= ~(TSSEL_MASK << tssr_offset);
+ writel_relaxed(reg, priv->base + TSSR(tssr_index));
+ raw_spin_unlock(&priv->lock);
+ }
+ irq_chip_disable_parent(d);
+}
+
+static void rzg2l_irqc_irq_enable(struct irq_data *d)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d);
+
+ if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ) {
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ unsigned long tint = (uintptr_t)d->chip_data;
+ u32 offset = hw_irq - IRQC_TINT_START;
+ u32 tssr_offset = TSSR_OFFSET(offset);
+ u8 tssr_index = TSSR_INDEX(offset);
+ u32 reg;
+
+ raw_spin_lock(&priv->lock);
+ reg = readl_relaxed(priv->base + TSSR(tssr_index));
+ reg |= (TIEN | tint) << TSSEL_SHIFT(tssr_offset);
+ writel_relaxed(reg, priv->base + TSSR(tssr_index));
+ raw_spin_unlock(&priv->lock);
+ }
+ irq_chip_enable_parent(d);
+}
+
+static int rzg2l_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ u16 sense, tmp;
+
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_LEVEL_LOW:
+ sense = IITSR_IITSEL_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ sense = IITSR_IITSEL_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ sense = IITSR_IITSEL_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ sense = IITSR_IITSEL_EDGE_BOTH;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ raw_spin_lock(&priv->lock);
+ tmp = readl_relaxed(priv->base + IITSR);
+ tmp &= ~IITSR_IITSEL_MASK(hw_irq);
+ tmp |= IITSR_IITSEL(hw_irq, sense);
+ writel_relaxed(tmp, priv->base + IITSR);
+ raw_spin_unlock(&priv->lock);
+
+ return 0;
+}
+
+static int rzg2l_tint_set_edge(struct irq_data *d, unsigned int type)
+{
+ struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+ u32 titseln = hwirq - IRQC_TINT_START;
+ u32 offset;
+ u8 sense;
+ u32 reg;
+
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ sense = TITSR_TITSEL_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ sense = TITSR_TITSEL_EDGE_FALLING;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ offset = TITSR0;
+ if (titseln >= TITSR0_MAX_INT) {
+ titseln -= TITSR0_MAX_INT;
+ offset = TITSR1;
+ }
+
+ raw_spin_lock(&priv->lock);
+ reg = readl_relaxed(priv->base + offset);
+ reg &= ~(IRQ_MASK << (titseln * TITSEL_WIDTH));
+ reg |= sense << (titseln * TITSEL_WIDTH);
+ writel_relaxed(reg, priv->base + offset);
+ raw_spin_unlock(&priv->lock);
+
+ return 0;
+}
+
+static int rzg2l_irqc_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int hw_irq = irqd_to_hwirq(d);
+ int ret = -EINVAL;
+
+ if (hw_irq >= IRQC_IRQ_START && hw_irq <= IRQC_IRQ_COUNT)
+ ret = rzg2l_irq_set_type(d, type);
+ else if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ)
+ ret = rzg2l_tint_set_edge(d, type);
+ if (ret)
+ return ret;
+
+ return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static const struct irq_chip irqc_chip = {
+ .name = "rzg2l-irqc",
+ .irq_eoi = rzg2l_irqc_eoi,
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_disable = rzg2l_irqc_irq_disable,
+ .irq_enable = rzg2l_irqc_irq_enable,
+ .irq_get_irqchip_state = irq_chip_get_parent_state,
+ .irq_set_irqchip_state = irq_chip_set_parent_state,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_type = rzg2l_irqc_set_type,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SET_TYPE_MASKED |
+ IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int rzg2l_irqc_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct rzg2l_irqc_priv *priv = domain->host_data;
+ unsigned long tint = 0;
+ irq_hw_number_t hwirq;
+ unsigned int type;
+ int ret;
+
+ ret = irq_domain_translate_twocell(domain, arg, &hwirq, &type);
+ if (ret)
+ return ret;
+
+ /*
+ * For TINT interrupts ie where pinctrl driver is child of irqc domain
+ * the hwirq and TINT are encoded in fwspec->param[0].
+ * hwirq for TINT range from 9-40, hwirq is embedded 0-15 bits and TINT
+ * from 16-31 bits. TINT from the pinctrl driver needs to be programmed
+ * in IRQC registers to enable a given gpio pin as interrupt.
+ */
+ if (hwirq > IRQC_IRQ_COUNT) {
+ tint = TINT_EXTRACT_GPIOINT(hwirq);
+ hwirq = TINT_EXTRACT_HWIRQ(hwirq);
+
+ if (hwirq < IRQC_TINT_START)
+ return -EINVAL;
+ }
+
+ if (hwirq > (IRQC_NUM_IRQ - 1))
+ return -EINVAL;
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq, &irqc_chip,
+ (void *)(uintptr_t)tint);
+ if (ret)
+ return ret;
+
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &priv->fwspec[hwirq]);
+}
+
+static const struct irq_domain_ops rzg2l_irqc_domain_ops = {
+ .alloc = rzg2l_irqc_alloc,
+ .free = irq_domain_free_irqs_common,
+ .translate = irq_domain_translate_twocell,
+};
+
+static int rzg2l_irqc_parse_interrupts(struct rzg2l_irqc_priv *priv,
+ struct device_node *np)
+{
+ struct of_phandle_args map;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < IRQC_NUM_IRQ; i++) {
+ ret = of_irq_parse_one(np, i, &map);
+ if (ret)
+ return ret;
+ of_phandle_args_to_fwspec(np, map.args, map.args_count,
+ &priv->fwspec[i]);
+ }
+
+ return 0;
+}
+
+static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
+{
+ struct irq_domain *irq_domain, *parent_domain;
+ struct platform_device *pdev;
+ struct reset_control *resetn;
+ struct rzg2l_irqc_priv *priv;
+ int ret;
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev)
+ return -ENODEV;
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ dev_err(&pdev->dev, "cannot find parent domain\n");
+ return -ENODEV;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ ret = rzg2l_irqc_parse_interrupts(priv, node);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot parse interrupts: %d\n", ret);
+ return ret;
+ }
+
+ resetn = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(resetn))
+ return PTR_ERR(resetn);
+
+ ret = reset_control_deassert(resetn);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to deassert resetn pin, %d\n", ret);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pm_runtime_resume_and_get failed: %d\n", ret);
+ goto pm_disable;
+ }
+
+ raw_spin_lock_init(&priv->lock);
+
+ irq_domain = irq_domain_add_hierarchy(parent_domain, 0, IRQC_NUM_IRQ,
+ node, &rzg2l_irqc_domain_ops,
+ priv);
+ if (!irq_domain) {
+ dev_err(&pdev->dev, "failed to add irq domain\n");
+ ret = -ENOMEM;
+ goto pm_put;
+ }
+
+ return 0;
+
+pm_put:
+ pm_runtime_put(&pdev->dev);
+pm_disable:
+ pm_runtime_disable(&pdev->dev);
+ reset_control_assert(resetn);
+ return ret;
+}
+
+IRQCHIP_PLATFORM_DRIVER_BEGIN(rzg2l_irqc)
+IRQCHIP_MATCH("renesas,rzg2l-irqc", rzg2l_irqc_init)
+IRQCHIP_PLATFORM_DRIVER_END(rzg2l_irqc)
+MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/G2L IRQC Driver");
+MODULE_LICENSE("GPL");
#define PLIC_DISABLE_THRESHOLD 0x7
#define PLIC_ENABLE_THRESHOLD 0
+#define PLIC_QUIRK_EDGE_INTERRUPT 0
+
struct plic_priv {
struct cpumask lmask;
struct irq_domain *irqdomain;
void __iomem *regs;
+ unsigned long plic_quirks;
};
struct plic_handler {
static bool plic_cpuhp_setup_done __ro_after_init;
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
+static int plic_irq_set_type(struct irq_data *d, unsigned int type);
+
static void __plic_toggle(void __iomem *enable_base, int hwirq, int enable)
{
u32 __iomem *reg = enable_base + (hwirq / 32) * sizeof(u32);
struct irq_data *d, int enable)
{
int cpu;
- struct plic_priv *priv = irq_data_get_irq_chip_data(d);
- writel(enable, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
for_each_cpu(cpu, mask) {
struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
- if (handler->present &&
- cpumask_test_cpu(cpu, &handler->priv->lmask))
- plic_toggle(handler, d->hwirq, enable);
+ plic_toggle(handler, d->hwirq, enable);
}
}
+static void plic_irq_enable(struct irq_data *d)
+{
+ plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 1);
+}
+
+static void plic_irq_disable(struct irq_data *d)
+{
+ plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 0);
+}
+
static void plic_irq_unmask(struct irq_data *d)
{
- struct cpumask amask;
- unsigned int cpu;
struct plic_priv *priv = irq_data_get_irq_chip_data(d);
- cpumask_and(&amask, &priv->lmask, cpu_online_mask);
- cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
- &amask);
- if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
- return;
- plic_irq_toggle(cpumask_of(cpu), d, 1);
+ writel(1, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
}
static void plic_irq_mask(struct irq_data *d)
{
struct plic_priv *priv = irq_data_get_irq_chip_data(d);
- plic_irq_toggle(&priv->lmask, d, 0);
+ writel(0, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
+}
+
+static void plic_irq_eoi(struct irq_data *d)
+{
+ struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
+
+ writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
}
#ifdef CONFIG_SMP
if (cpu >= nr_cpu_ids)
return -EINVAL;
- plic_irq_toggle(&priv->lmask, d, 0);
- plic_irq_toggle(cpumask_of(cpu), d, !irqd_irq_masked(d));
+ plic_irq_disable(d);
irq_data_update_effective_affinity(d, cpumask_of(cpu));
+ if (!irqd_irq_disabled(d))
+ plic_irq_enable(d);
+
return IRQ_SET_MASK_OK_DONE;
}
#endif
-static void plic_irq_eoi(struct irq_data *d)
-{
- struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
-
- if (irqd_irq_masked(d)) {
- plic_irq_unmask(d);
- writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
- plic_irq_mask(d);
- } else {
- writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
- }
-}
+static struct irq_chip plic_edge_chip = {
+ .name = "SiFive PLIC",
+ .irq_enable = plic_irq_enable,
+ .irq_disable = plic_irq_disable,
+ .irq_ack = plic_irq_eoi,
+ .irq_mask = plic_irq_mask,
+ .irq_unmask = plic_irq_unmask,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = plic_set_affinity,
+#endif
+ .irq_set_type = plic_irq_set_type,
+ .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
+};
static struct irq_chip plic_chip = {
.name = "SiFive PLIC",
+ .irq_enable = plic_irq_enable,
+ .irq_disable = plic_irq_disable,
.irq_mask = plic_irq_mask,
.irq_unmask = plic_irq_unmask,
.irq_eoi = plic_irq_eoi,
#ifdef CONFIG_SMP
.irq_set_affinity = plic_set_affinity,
#endif
+ .irq_set_type = plic_irq_set_type,
+ .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
};
+static int plic_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct plic_priv *priv = irq_data_get_irq_chip_data(d);
+
+ if (!test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks))
+ return IRQ_SET_MASK_OK_NOCOPY;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ irq_set_chip_handler_name_locked(d, &plic_edge_chip,
+ handle_edge_irq, NULL);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_set_chip_handler_name_locked(d, &plic_chip,
+ handle_fasteoi_irq, NULL);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return IRQ_SET_MASK_OK;
+}
+
static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
return 0;
}
+static int plic_irq_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct plic_priv *priv = d->host_data;
+
+ if (test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks))
+ return irq_domain_translate_twocell(d, fwspec, hwirq, type);
+
+ return irq_domain_translate_onecell(d, fwspec, hwirq, type);
+}
+
static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *arg)
{
unsigned int type;
struct irq_fwspec *fwspec = arg;
- ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+ ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
if (ret)
return ret;
}
static const struct irq_domain_ops plic_irqdomain_ops = {
- .translate = irq_domain_translate_onecell,
+ .translate = plic_irq_domain_translate,
.alloc = plic_irq_domain_alloc,
.free = irq_domain_free_irqs_top,
};
return 0;
}
-static int __init plic_init(struct device_node *node,
- struct device_node *parent)
+static int __init __plic_init(struct device_node *node,
+ struct device_node *parent,
+ unsigned long plic_quirks)
{
int error = 0, nr_contexts, nr_handlers = 0, i;
u32 nr_irqs;
if (!priv)
return -ENOMEM;
+ priv->plic_quirks = plic_quirks;
+
priv->regs = of_iomap(node, 0);
if (WARN_ON(!priv->regs)) {
error = -EIO;
i * CONTEXT_ENABLE_SIZE;
handler->priv = priv;
done:
- for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
+ for (hwirq = 1; hwirq <= nr_irqs; hwirq++) {
plic_toggle(handler, hwirq, 0);
+ writel(1, priv->regs + PRIORITY_BASE +
+ hwirq * PRIORITY_PER_ID);
+ }
nr_handlers++;
}
return error;
}
+static int __init plic_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return __plic_init(node, parent, 0);
+}
+
IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
-IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
+
+static int __init plic_edge_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return __plic_init(node, parent, BIT(PLIC_QUIRK_EDGE_INTERRUPT));
+}
+
+IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_edge_init);
+IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define SP_INTC_HWIRQ_MIN 0
+#define SP_INTC_HWIRQ_MAX 223
+
+#define SP_INTC_NR_IRQS (SP_INTC_HWIRQ_MAX - SP_INTC_HWIRQ_MIN + 1)
+#define SP_INTC_NR_GROUPS DIV_ROUND_UP(SP_INTC_NR_IRQS, 32)
+#define SP_INTC_REG_SIZE (SP_INTC_NR_GROUPS * 4)
+
+/* REG_GROUP_0 regs */
+#define REG_INTR_TYPE (sp_intc.g0)
+#define REG_INTR_POLARITY (REG_INTR_TYPE + SP_INTC_REG_SIZE)
+#define REG_INTR_PRIORITY (REG_INTR_POLARITY + SP_INTC_REG_SIZE)
+#define REG_INTR_MASK (REG_INTR_PRIORITY + SP_INTC_REG_SIZE)
+
+/* REG_GROUP_1 regs */
+#define REG_INTR_CLEAR (sp_intc.g1)
+#define REG_MASKED_EXT1 (REG_INTR_CLEAR + SP_INTC_REG_SIZE)
+#define REG_MASKED_EXT0 (REG_MASKED_EXT1 + SP_INTC_REG_SIZE)
+#define REG_INTR_GROUP (REG_INTR_CLEAR + 31 * 4)
+
+#define GROUP_MASK (BIT(SP_INTC_NR_GROUPS) - 1)
+#define GROUP_SHIFT_EXT1 (0)
+#define GROUP_SHIFT_EXT0 (8)
+
+/*
+ * When GPIO_INT0~7 set to edge trigger, doesn't work properly.
+ * WORKAROUND: change it to level trigger, and toggle the polarity
+ * at ACK/Handler to make the HW work.
+ */
+#define GPIO_INT0_HWIRQ 120
+#define GPIO_INT7_HWIRQ 127
+#define IS_GPIO_INT(irq) \
+({ \
+ u32 i = irq; \
+ (i >= GPIO_INT0_HWIRQ) && (i <= GPIO_INT7_HWIRQ); \
+})
+
+/* index of states */
+enum {
+ _IS_EDGE = 0,
+ _IS_LOW,
+ _IS_ACTIVE
+};
+
+#define STATE_BIT(irq, idx) (((irq) - GPIO_INT0_HWIRQ) * 3 + (idx))
+#define ASSIGN_STATE(irq, idx, v) assign_bit(STATE_BIT(irq, idx), sp_intc.states, v)
+#define TEST_STATE(irq, idx) test_bit(STATE_BIT(irq, idx), sp_intc.states)
+
+static struct sp_intctl {
+ /*
+ * REG_GROUP_0: include type/polarity/priority/mask regs.
+ * REG_GROUP_1: include clear/masked_ext0/masked_ext1/group regs.
+ */
+ void __iomem *g0; // REG_GROUP_0 base
+ void __iomem *g1; // REG_GROUP_1 base
+
+ struct irq_domain *domain;
+ raw_spinlock_t lock;
+
+ /*
+ * store GPIO_INT states
+ * each interrupt has 3 states: is_edge, is_low, is_active
+ */
+ DECLARE_BITMAP(states, (GPIO_INT7_HWIRQ - GPIO_INT0_HWIRQ + 1) * 3);
+} sp_intc;
+
+static struct irq_chip sp_intc_chip;
+
+static void sp_intc_assign_bit(u32 hwirq, void __iomem *base, bool value)
+{
+ u32 offset, mask;
+ unsigned long flags;
+ void __iomem *reg;
+
+ offset = (hwirq / 32) * 4;
+ reg = base + offset;
+
+ raw_spin_lock_irqsave(&sp_intc.lock, flags);
+ mask = readl_relaxed(reg);
+ if (value)
+ mask |= BIT(hwirq % 32);
+ else
+ mask &= ~BIT(hwirq % 32);
+ writel_relaxed(mask, reg);
+ raw_spin_unlock_irqrestore(&sp_intc.lock, flags);
+}
+
+static void sp_intc_ack_irq(struct irq_data *d)
+{
+ u32 hwirq = d->hwirq;
+
+ if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_EDGE))) { // WORKAROUND
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, !TEST_STATE(hwirq, _IS_LOW));
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, true);
+ }
+
+ sp_intc_assign_bit(hwirq, REG_INTR_CLEAR, 1);
+}
+
+static void sp_intc_mask_irq(struct irq_data *d)
+{
+ sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 0);
+}
+
+static void sp_intc_unmask_irq(struct irq_data *d)
+{
+ sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 1);
+}
+
+static int sp_intc_set_type(struct irq_data *d, unsigned int type)
+{
+ u32 hwirq = d->hwirq;
+ bool is_edge = !(type & IRQ_TYPE_LEVEL_MASK);
+ bool is_low = (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING);
+
+ irq_set_handler_locked(d, is_edge ? handle_edge_irq : handle_level_irq);
+
+ if (unlikely(IS_GPIO_INT(hwirq) && is_edge)) { // WORKAROUND
+ /* store states */
+ ASSIGN_STATE(hwirq, _IS_EDGE, is_edge);
+ ASSIGN_STATE(hwirq, _IS_LOW, is_low);
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+ /* change to level */
+ is_edge = false;
+ }
+
+ sp_intc_assign_bit(hwirq, REG_INTR_TYPE, is_edge);
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, is_low);
+
+ return 0;
+}
+
+static int sp_intc_get_ext_irq(int ext_num)
+{
+ void __iomem *base = ext_num ? REG_MASKED_EXT1 : REG_MASKED_EXT0;
+ u32 shift = ext_num ? GROUP_SHIFT_EXT1 : GROUP_SHIFT_EXT0;
+ u32 groups;
+ u32 pending_group;
+ u32 group;
+ u32 pending_irq;
+
+ groups = readl_relaxed(REG_INTR_GROUP);
+ pending_group = (groups >> shift) & GROUP_MASK;
+ if (!pending_group)
+ return -1;
+
+ group = fls(pending_group) - 1;
+ pending_irq = readl_relaxed(base + group * 4);
+ if (!pending_irq)
+ return -1;
+
+ return (group * 32) + fls(pending_irq) - 1;
+}
+
+static void sp_intc_handle_ext_cascaded(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ int ext_num = (uintptr_t)irq_desc_get_handler_data(desc);
+ int hwirq;
+
+ chained_irq_enter(chip, desc);
+
+ while ((hwirq = sp_intc_get_ext_irq(ext_num)) >= 0) {
+ if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_ACTIVE))) { // WORKAROUND
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, TEST_STATE(hwirq, _IS_LOW));
+ } else {
+ generic_handle_domain_irq(sp_intc.domain, hwirq);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip sp_intc_chip = {
+ .name = "sp_intc",
+ .irq_ack = sp_intc_ack_irq,
+ .irq_mask = sp_intc_mask_irq,
+ .irq_unmask = sp_intc_unmask_irq,
+ .irq_set_type = sp_intc_set_type,
+};
+
+static int sp_intc_irq_domain_map(struct irq_domain *domain,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sp_intc_chip, handle_level_irq);
+ irq_set_chip_data(irq, &sp_intc_chip);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops sp_intc_dm_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = sp_intc_irq_domain_map,
+};
+
+static int sp_intc_irq_map(struct device_node *node, int i)
+{
+ unsigned int irq;
+
+ irq = irq_of_parse_and_map(node, i);
+ if (!irq)
+ return -ENOENT;
+
+ irq_set_chained_handler_and_data(irq, sp_intc_handle_ext_cascaded, (void *)(uintptr_t)i);
+
+ return 0;
+}
+
+static int __init sp_intc_init_dt(struct device_node *node, struct device_node *parent)
+{
+ int i, ret;
+
+ sp_intc.g0 = of_iomap(node, 0);
+ if (!sp_intc.g0)
+ return -ENXIO;
+
+ sp_intc.g1 = of_iomap(node, 1);
+ if (!sp_intc.g1) {
+ ret = -ENXIO;
+ goto out_unmap0;
+ }
+
+ ret = sp_intc_irq_map(node, 0); // EXT_INT0
+ if (ret)
+ goto out_unmap1;
+
+ ret = sp_intc_irq_map(node, 1); // EXT_INT1
+ if (ret)
+ goto out_unmap1;
+
+ /* initial regs */
+ for (i = 0; i < SP_INTC_NR_GROUPS; i++) {
+ /* all mask */
+ writel_relaxed(0, REG_INTR_MASK + i * 4);
+ /* all edge */
+ writel_relaxed(~0, REG_INTR_TYPE + i * 4);
+ /* all high-active */
+ writel_relaxed(0, REG_INTR_POLARITY + i * 4);
+ /* all EXT_INT0 */
+ writel_relaxed(~0, REG_INTR_PRIORITY + i * 4);
+ /* all clear */
+ writel_relaxed(~0, REG_INTR_CLEAR + i * 4);
+ }
+
+ sp_intc.domain = irq_domain_add_linear(node, SP_INTC_NR_IRQS,
+ &sp_intc_dm_ops, &sp_intc);
+ if (!sp_intc.domain) {
+ ret = -ENOMEM;
+ goto out_unmap1;
+ }
+
+ raw_spin_lock_init(&sp_intc.lock);
+
+ return 0;
+
+out_unmap1:
+ iounmap(sp_intc.g1);
+out_unmap0:
+ iounmap(sp_intc.g0);
+
+ return ret;
+}
+
+IRQCHIP_DECLARE(sp_intc, "sunplus,sp7021-intc", sp_intc_init_dt);
u32 swier_ofst;
u32 rpr_ofst;
u32 fpr_ofst;
+ u32 trg_ofst;
};
#define UNDEF_REG ~0
-struct stm32_desc_irq {
- u32 exti;
- u32 irq_parent;
- struct irq_chip *chip;
-};
-
struct stm32_exti_drv_data {
const struct stm32_exti_bank **exti_banks;
- const struct stm32_desc_irq *desc_irqs;
+ const u8 *desc_irqs;
u32 bank_nr;
- u32 irq_nr;
};
struct stm32_exti_chip_data {
.swier_ofst = 0x10,
.rpr_ofst = 0x14,
.fpr_ofst = UNDEF_REG,
+ .trg_ofst = UNDEF_REG,
};
static const struct stm32_exti_bank *stm32f4xx_exti_banks[] = {
.swier_ofst = 0x08,
.rpr_ofst = 0x88,
.fpr_ofst = UNDEF_REG,
+ .trg_ofst = UNDEF_REG,
};
static const struct stm32_exti_bank stm32h7xx_exti_b2 = {
.swier_ofst = 0x28,
.rpr_ofst = 0x98,
.fpr_ofst = UNDEF_REG,
+ .trg_ofst = UNDEF_REG,
};
static const struct stm32_exti_bank stm32h7xx_exti_b3 = {
.swier_ofst = 0x48,
.rpr_ofst = 0xA8,
.fpr_ofst = UNDEF_REG,
+ .trg_ofst = UNDEF_REG,
};
static const struct stm32_exti_bank *stm32h7xx_exti_banks[] = {
static const struct stm32_exti_bank stm32mp1_exti_b1 = {
.imr_ofst = 0x80,
- .emr_ofst = 0x84,
+ .emr_ofst = UNDEF_REG,
.rtsr_ofst = 0x00,
.ftsr_ofst = 0x04,
.swier_ofst = 0x08,
.rpr_ofst = 0x0C,
.fpr_ofst = 0x10,
+ .trg_ofst = 0x3EC,
};
static const struct stm32_exti_bank stm32mp1_exti_b2 = {
.imr_ofst = 0x90,
- .emr_ofst = 0x94,
+ .emr_ofst = UNDEF_REG,
.rtsr_ofst = 0x20,
.ftsr_ofst = 0x24,
.swier_ofst = 0x28,
.rpr_ofst = 0x2C,
.fpr_ofst = 0x30,
+ .trg_ofst = 0x3E8,
};
static const struct stm32_exti_bank stm32mp1_exti_b3 = {
.imr_ofst = 0xA0,
- .emr_ofst = 0xA4,
+ .emr_ofst = UNDEF_REG,
.rtsr_ofst = 0x40,
.ftsr_ofst = 0x44,
.swier_ofst = 0x48,
.rpr_ofst = 0x4C,
.fpr_ofst = 0x50,
+ .trg_ofst = 0x3E4,
};
static const struct stm32_exti_bank *stm32mp1_exti_banks[] = {
static struct irq_chip stm32_exti_h_chip;
static struct irq_chip stm32_exti_h_chip_direct;
-static const struct stm32_desc_irq stm32mp1_desc_irq[] = {
- { .exti = 0, .irq_parent = 6, .chip = &stm32_exti_h_chip },
- { .exti = 1, .irq_parent = 7, .chip = &stm32_exti_h_chip },
- { .exti = 2, .irq_parent = 8, .chip = &stm32_exti_h_chip },
- { .exti = 3, .irq_parent = 9, .chip = &stm32_exti_h_chip },
- { .exti = 4, .irq_parent = 10, .chip = &stm32_exti_h_chip },
- { .exti = 5, .irq_parent = 23, .chip = &stm32_exti_h_chip },
- { .exti = 6, .irq_parent = 64, .chip = &stm32_exti_h_chip },
- { .exti = 7, .irq_parent = 65, .chip = &stm32_exti_h_chip },
- { .exti = 8, .irq_parent = 66, .chip = &stm32_exti_h_chip },
- { .exti = 9, .irq_parent = 67, .chip = &stm32_exti_h_chip },
- { .exti = 10, .irq_parent = 40, .chip = &stm32_exti_h_chip },
- { .exti = 11, .irq_parent = 42, .chip = &stm32_exti_h_chip },
- { .exti = 12, .irq_parent = 76, .chip = &stm32_exti_h_chip },
- { .exti = 13, .irq_parent = 77, .chip = &stm32_exti_h_chip },
- { .exti = 14, .irq_parent = 121, .chip = &stm32_exti_h_chip },
- { .exti = 15, .irq_parent = 127, .chip = &stm32_exti_h_chip },
- { .exti = 16, .irq_parent = 1, .chip = &stm32_exti_h_chip },
- { .exti = 19, .irq_parent = 3, .chip = &stm32_exti_h_chip_direct },
- { .exti = 21, .irq_parent = 31, .chip = &stm32_exti_h_chip_direct },
- { .exti = 22, .irq_parent = 33, .chip = &stm32_exti_h_chip_direct },
- { .exti = 23, .irq_parent = 72, .chip = &stm32_exti_h_chip_direct },
- { .exti = 24, .irq_parent = 95, .chip = &stm32_exti_h_chip_direct },
- { .exti = 25, .irq_parent = 107, .chip = &stm32_exti_h_chip_direct },
- { .exti = 26, .irq_parent = 37, .chip = &stm32_exti_h_chip_direct },
- { .exti = 27, .irq_parent = 38, .chip = &stm32_exti_h_chip_direct },
- { .exti = 28, .irq_parent = 39, .chip = &stm32_exti_h_chip_direct },
- { .exti = 29, .irq_parent = 71, .chip = &stm32_exti_h_chip_direct },
- { .exti = 30, .irq_parent = 52, .chip = &stm32_exti_h_chip_direct },
- { .exti = 31, .irq_parent = 53, .chip = &stm32_exti_h_chip_direct },
- { .exti = 32, .irq_parent = 82, .chip = &stm32_exti_h_chip_direct },
- { .exti = 33, .irq_parent = 83, .chip = &stm32_exti_h_chip_direct },
- { .exti = 47, .irq_parent = 93, .chip = &stm32_exti_h_chip_direct },
- { .exti = 48, .irq_parent = 138, .chip = &stm32_exti_h_chip_direct },
- { .exti = 50, .irq_parent = 139, .chip = &stm32_exti_h_chip_direct },
- { .exti = 52, .irq_parent = 140, .chip = &stm32_exti_h_chip_direct },
- { .exti = 53, .irq_parent = 141, .chip = &stm32_exti_h_chip_direct },
- { .exti = 54, .irq_parent = 135, .chip = &stm32_exti_h_chip_direct },
- { .exti = 61, .irq_parent = 100, .chip = &stm32_exti_h_chip_direct },
- { .exti = 65, .irq_parent = 144, .chip = &stm32_exti_h_chip },
- { .exti = 68, .irq_parent = 143, .chip = &stm32_exti_h_chip },
- { .exti = 70, .irq_parent = 62, .chip = &stm32_exti_h_chip_direct },
- { .exti = 73, .irq_parent = 129, .chip = &stm32_exti_h_chip },
+#define EXTI_INVALID_IRQ U8_MAX
+#define STM32MP1_DESC_IRQ_SIZE (ARRAY_SIZE(stm32mp1_exti_banks) * IRQS_PER_BANK)
+
+static const u8 stm32mp1_desc_irq[] = {
+ /* default value */
+ [0 ... (STM32MP1_DESC_IRQ_SIZE - 1)] = EXTI_INVALID_IRQ,
+
+ [0] = 6,
+ [1] = 7,
+ [2] = 8,
+ [3] = 9,
+ [4] = 10,
+ [5] = 23,
+ [6] = 64,
+ [7] = 65,
+ [8] = 66,
+ [9] = 67,
+ [10] = 40,
+ [11] = 42,
+ [12] = 76,
+ [13] = 77,
+ [14] = 121,
+ [15] = 127,
+ [16] = 1,
+ [19] = 3,
+ [21] = 31,
+ [22] = 33,
+ [23] = 72,
+ [24] = 95,
+ [25] = 107,
+ [26] = 37,
+ [27] = 38,
+ [28] = 39,
+ [29] = 71,
+ [30] = 52,
+ [31] = 53,
+ [32] = 82,
+ [33] = 83,
+ [47] = 93,
+ [48] = 138,
+ [50] = 139,
+ [52] = 140,
+ [53] = 141,
+ [54] = 135,
+ [61] = 100,
+ [65] = 144,
+ [68] = 143,
+ [70] = 62,
+ [73] = 129,
};
-static const struct stm32_desc_irq stm32mp13_desc_irq[] = {
- { .exti = 0, .irq_parent = 6, .chip = &stm32_exti_h_chip },
- { .exti = 1, .irq_parent = 7, .chip = &stm32_exti_h_chip },
- { .exti = 2, .irq_parent = 8, .chip = &stm32_exti_h_chip },
- { .exti = 3, .irq_parent = 9, .chip = &stm32_exti_h_chip },
- { .exti = 4, .irq_parent = 10, .chip = &stm32_exti_h_chip },
- { .exti = 5, .irq_parent = 24, .chip = &stm32_exti_h_chip },
- { .exti = 6, .irq_parent = 65, .chip = &stm32_exti_h_chip },
- { .exti = 7, .irq_parent = 66, .chip = &stm32_exti_h_chip },
- { .exti = 8, .irq_parent = 67, .chip = &stm32_exti_h_chip },
- { .exti = 9, .irq_parent = 68, .chip = &stm32_exti_h_chip },
- { .exti = 10, .irq_parent = 41, .chip = &stm32_exti_h_chip },
- { .exti = 11, .irq_parent = 43, .chip = &stm32_exti_h_chip },
- { .exti = 12, .irq_parent = 77, .chip = &stm32_exti_h_chip },
- { .exti = 13, .irq_parent = 78, .chip = &stm32_exti_h_chip },
- { .exti = 14, .irq_parent = 106, .chip = &stm32_exti_h_chip },
- { .exti = 15, .irq_parent = 109, .chip = &stm32_exti_h_chip },
- { .exti = 16, .irq_parent = 1, .chip = &stm32_exti_h_chip },
- { .exti = 19, .irq_parent = 3, .chip = &stm32_exti_h_chip_direct },
- { .exti = 21, .irq_parent = 32, .chip = &stm32_exti_h_chip_direct },
- { .exti = 22, .irq_parent = 34, .chip = &stm32_exti_h_chip_direct },
- { .exti = 23, .irq_parent = 73, .chip = &stm32_exti_h_chip_direct },
- { .exti = 24, .irq_parent = 93, .chip = &stm32_exti_h_chip_direct },
- { .exti = 25, .irq_parent = 114, .chip = &stm32_exti_h_chip_direct },
- { .exti = 26, .irq_parent = 38, .chip = &stm32_exti_h_chip_direct },
- { .exti = 27, .irq_parent = 39, .chip = &stm32_exti_h_chip_direct },
- { .exti = 28, .irq_parent = 40, .chip = &stm32_exti_h_chip_direct },
- { .exti = 29, .irq_parent = 72, .chip = &stm32_exti_h_chip_direct },
- { .exti = 30, .irq_parent = 53, .chip = &stm32_exti_h_chip_direct },
- { .exti = 31, .irq_parent = 54, .chip = &stm32_exti_h_chip_direct },
- { .exti = 32, .irq_parent = 83, .chip = &stm32_exti_h_chip_direct },
- { .exti = 33, .irq_parent = 84, .chip = &stm32_exti_h_chip_direct },
- { .exti = 44, .irq_parent = 96, .chip = &stm32_exti_h_chip_direct },
- { .exti = 47, .irq_parent = 92, .chip = &stm32_exti_h_chip_direct },
- { .exti = 48, .irq_parent = 116, .chip = &stm32_exti_h_chip_direct },
- { .exti = 50, .irq_parent = 117, .chip = &stm32_exti_h_chip_direct },
- { .exti = 52, .irq_parent = 118, .chip = &stm32_exti_h_chip_direct },
- { .exti = 53, .irq_parent = 119, .chip = &stm32_exti_h_chip_direct },
- { .exti = 68, .irq_parent = 63, .chip = &stm32_exti_h_chip_direct },
- { .exti = 70, .irq_parent = 98, .chip = &stm32_exti_h_chip_direct },
+static const u8 stm32mp13_desc_irq[] = {
+ /* default value */
+ [0 ... (STM32MP1_DESC_IRQ_SIZE - 1)] = EXTI_INVALID_IRQ,
+
+ [0] = 6,
+ [1] = 7,
+ [2] = 8,
+ [3] = 9,
+ [4] = 10,
+ [5] = 24,
+ [6] = 65,
+ [7] = 66,
+ [8] = 67,
+ [9] = 68,
+ [10] = 41,
+ [11] = 43,
+ [12] = 77,
+ [13] = 78,
+ [14] = 106,
+ [15] = 109,
+ [16] = 1,
+ [19] = 3,
+ [21] = 32,
+ [22] = 34,
+ [23] = 73,
+ [24] = 93,
+ [25] = 114,
+ [26] = 38,
+ [27] = 39,
+ [28] = 40,
+ [29] = 72,
+ [30] = 53,
+ [31] = 54,
+ [32] = 83,
+ [33] = 84,
+ [44] = 96,
+ [47] = 92,
+ [48] = 116,
+ [50] = 117,
+ [52] = 118,
+ [53] = 119,
+ [68] = 63,
+ [70] = 98,
};
static const struct stm32_exti_drv_data stm32mp1_drv_data = {
.exti_banks = stm32mp1_exti_banks,
.bank_nr = ARRAY_SIZE(stm32mp1_exti_banks),
.desc_irqs = stm32mp1_desc_irq,
- .irq_nr = ARRAY_SIZE(stm32mp1_desc_irq),
};
static const struct stm32_exti_drv_data stm32mp13_drv_data = {
.exti_banks = stm32mp1_exti_banks,
.bank_nr = ARRAY_SIZE(stm32mp1_exti_banks),
.desc_irqs = stm32mp13_desc_irq,
- .irq_nr = ARRAY_SIZE(stm32mp13_desc_irq),
};
-static const struct
-stm32_desc_irq *stm32_exti_get_desc(const struct stm32_exti_drv_data *drv_data,
- irq_hw_number_t hwirq)
-{
- const struct stm32_desc_irq *desc = NULL;
- int i;
-
- if (!drv_data->desc_irqs)
- return NULL;
-
- for (i = 0; i < drv_data->irq_nr; i++) {
- desc = &drv_data->desc_irqs[i];
- if (desc->exti == hwirq)
- break;
- }
-
- return desc;
-}
-
static unsigned long stm32_exti_pending(struct irq_chip_generic *gc)
{
struct stm32_exti_chip_data *chip_data = gc->private;
if (d->parent_data->chip)
return irq_chip_set_affinity_parent(d, dest, force);
- return -EINVAL;
+ return IRQ_SET_MASK_OK_DONE;
}
static int __maybe_unused stm32_exti_h_suspend(void)
.name = "stm32-exti-h-direct",
.irq_eoi = irq_chip_eoi_parent,
.irq_ack = irq_chip_ack_parent,
- .irq_mask = irq_chip_mask_parent,
- .irq_unmask = irq_chip_unmask_parent,
+ .irq_mask = stm32_exti_h_mask,
+ .irq_unmask = stm32_exti_h_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_type = irq_chip_set_type_parent,
.irq_set_wake = stm32_exti_h_set_wake,
{
struct stm32_exti_host_data *host_data = dm->host_data;
struct stm32_exti_chip_data *chip_data;
- const struct stm32_desc_irq *desc;
+ u8 desc_irq;
struct irq_fwspec *fwspec = data;
struct irq_fwspec p_fwspec;
irq_hw_number_t hwirq;
int bank;
+ u32 event_trg;
+ struct irq_chip *chip;
hwirq = fwspec->param[0];
+ if (hwirq >= host_data->drv_data->bank_nr * IRQS_PER_BANK)
+ return -EINVAL;
+
bank = hwirq / IRQS_PER_BANK;
chip_data = &host_data->chips_data[bank];
+ event_trg = readl_relaxed(host_data->base + chip_data->reg_bank->trg_ofst);
+ chip = (event_trg & BIT(hwirq % IRQS_PER_BANK)) ?
+ &stm32_exti_h_chip : &stm32_exti_h_chip_direct;
+
+ irq_domain_set_hwirq_and_chip(dm, virq, hwirq, chip, chip_data);
- desc = stm32_exti_get_desc(host_data->drv_data, hwirq);
- if (!desc)
+ if (!host_data->drv_data || !host_data->drv_data->desc_irqs)
return -EINVAL;
- irq_domain_set_hwirq_and_chip(dm, virq, hwirq, desc->chip,
- chip_data);
- if (desc->irq_parent) {
+ desc_irq = host_data->drv_data->desc_irqs[hwirq];
+ if (desc_irq != EXTI_INVALID_IRQ) {
p_fwspec.fwnode = dm->parent->fwnode;
p_fwspec.param_count = 3;
p_fwspec.param[0] = GIC_SPI;
- p_fwspec.param[1] = desc->irq_parent;
+ p_fwspec.param[1] = desc_irq;
p_fwspec.param[2] = IRQ_TYPE_LEVEL_HIGH;
return irq_domain_alloc_irqs_parent(dm, virq, 1, &p_fwspec);
* clear registers to avoid residue
*/
writel_relaxed(0, base + stm32_bank->imr_ofst);
- writel_relaxed(0, base + stm32_bank->emr_ofst);
+ if (stm32_bank->emr_ofst != UNDEF_REG)
+ writel_relaxed(0, base + stm32_bank->emr_ofst);
pr_info("%pOF: bank%d\n", node, bank_idx);
/* SMI COMMON */
#define SMI_L1LEN 0x100
+#define SMI_L1_ARB 0x200
#define SMI_BUS_SEL 0x220
#define SMI_BUS_LARB_SHIFT(larbid) ((larbid) << 1)
/* All are MMU0 defaultly. Only specialize mmu1 here. */
#define F_MMU1_LARB(larbid) (0x1 << SMI_BUS_LARB_SHIFT(larbid))
+#define SMI_READ_FIFO_TH 0x230
#define SMI_M4U_TH 0x234
#define SMI_FIFO_TH1 0x238
#define SMI_FIFO_TH2 0x23c
{.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
{.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},
{.compatible = "mediatek,mt6779-smi-larb", .data = &mtk_smi_larb_mt6779},
+ {.compatible = "mediatek,mt6795-smi-larb", .data = &mtk_smi_larb_mt8173},
{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
}
};
+static const struct mtk_smi_reg_pair mtk_smi_common_mt6795_init[SMI_COMMON_INIT_REGS_NR] = {
+ {SMI_L1_ARB, 0x1b},
+ {SMI_M4U_TH, 0xce810c85},
+ {SMI_FIFO_TH1, 0x43214c8},
+ {SMI_READ_FIFO_TH, 0x191f},
+};
+
static const struct mtk_smi_reg_pair mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
{SMI_L1LEN, 0xb},
{SMI_M4U_TH, 0xe100e10},
F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
};
+static const struct mtk_smi_common_plat mtk_smi_common_mt6795 = {
+ .type = MTK_SMI_GEN2,
+ .bus_sel = F_MMU1_LARB(0),
+ .init = mtk_smi_common_mt6795_init,
+};
+
static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
.type = MTK_SMI_GEN2,
.has_gals = true,
{.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
{.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt6779-smi-common", .data = &mtk_smi_common_mt6779},
+ {.compatible = "mediatek,mt6795-smi-common", .data = &mtk_smi_common_mt6795},
{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
static const struct tegra_mc_client tegra234_mc_clients[] = {
{
+ .id = TEGRA234_MEMORY_CLIENT_MGBEARD,
+ .name = "mgbeard",
+ .sid = TEGRA234_SID_MGBE,
+ .regs = {
+ .sid = {
+ .override = 0x2c0,
+ .security = 0x2c4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBEBRD,
+ .name = "mgbebrd",
+ .sid = TEGRA234_SID_MGBE_VF1,
+ .regs = {
+ .sid = {
+ .override = 0x2c8,
+ .security = 0x2cc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBECRD,
+ .name = "mgbecrd",
+ .sid = TEGRA234_SID_MGBE_VF2,
+ .regs = {
+ .sid = {
+ .override = 0x2d0,
+ .security = 0x2d4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBEDRD,
+ .name = "mgbedrd",
+ .sid = TEGRA234_SID_MGBE_VF3,
+ .regs = {
+ .sid = {
+ .override = 0x2d8,
+ .security = 0x2dc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBEAWR,
+ .name = "mgbeawr",
+ .sid = TEGRA234_SID_MGBE,
+ .regs = {
+ .sid = {
+ .override = 0x2e0,
+ .security = 0x2e4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBEBWR,
+ .name = "mgbebwr",
+ .sid = TEGRA234_SID_MGBE_VF1,
+ .regs = {
+ .sid = {
+ .override = 0x2f8,
+ .security = 0x2fc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBECWR,
+ .name = "mgbecwr",
+ .sid = TEGRA234_SID_MGBE_VF2,
+ .regs = {
+ .sid = {
+ .override = 0x308,
+ .security = 0x30c,
+ },
+ },
+ }, {
.id = TEGRA234_MEMORY_CLIENT_SDMMCRAB,
.name = "sdmmcrab",
.sid = TEGRA234_SID_SDMMC4,
.security = 0x31c,
},
},
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_MGBEDWR,
+ .name = "mgbedwr",
+ .sid = TEGRA234_SID_MGBE_VF3,
+ .regs = {
+ .sid = {
+ .override = 0x328,
+ .security = 0x32c,
+ },
+ },
}, {
.id = TEGRA234_MEMORY_CLIENT_SDMMCWAB,
.name = "sdmmcwab",
{ .name = "bcm2835-power" },
};
+static int bcm2835_pm_get_pdata(struct platform_device *pdev,
+ struct bcm2835_pm *pm)
+{
+ if (of_find_property(pm->dev->of_node, "reg-names", NULL)) {
+ struct resource *res;
+
+ pm->base = devm_platform_ioremap_resource_byname(pdev, "pm");
+ if (IS_ERR(pm->base))
+ return PTR_ERR(pm->base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "asb");
+ if (res) {
+ pm->asb = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pm->asb))
+ pm->asb = NULL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "rpivid_asb");
+ if (res) {
+ pm->rpivid_asb = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pm->rpivid_asb))
+ pm->rpivid_asb = NULL;
+ }
+
+ return 0;
+ }
+
+ /* If no 'reg-names' property is found we can assume we're using old DTB. */
+ pm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pm->base))
+ return PTR_ERR(pm->base);
+
+ pm->asb = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(pm->asb))
+ pm->asb = NULL;
+
+ pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(pm->rpivid_asb))
+ pm->rpivid_asb = NULL;
+
+ return 0;
+}
+
static int bcm2835_pm_probe(struct platform_device *pdev)
{
- struct resource *res;
struct device *dev = &pdev->dev;
struct bcm2835_pm *pm;
int ret;
pm->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pm->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(pm->base))
- return PTR_ERR(pm->base);
+ ret = bcm2835_pm_get_pdata(pdev, pm);
+ if (ret)
+ return ret;
ret = devm_mfd_add_devices(dev, -1,
bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
if (ret)
return ret;
- /* We'll use the presence of the AXI ASB regs in the
+ /*
+ * We'll use the presence of the AXI ASB regs in the
* bcm2835-pm binding as the key for whether we can reference
* the full PM register range and support power domains.
*/
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res) {
- pm->asb = devm_ioremap_resource(dev, res);
- if (IS_ERR(pm->asb))
- return PTR_ERR(pm->asb);
-
- ret = devm_mfd_add_devices(dev, -1,
- bcm2835_power_devs,
- ARRAY_SIZE(bcm2835_power_devs),
- NULL, 0, NULL);
- if (ret)
- return ret;
- }
-
+ if (pm->asb)
+ return devm_mfd_add_devices(dev, -1, bcm2835_power_devs,
+ ARRAY_SIZE(bcm2835_power_devs),
+ NULL, 0, NULL);
return 0;
}
static const struct of_device_id bcm2835_pm_of_match[] = {
{ .compatible = "brcm,bcm2835-pm-wdt", },
{ .compatible = "brcm,bcm2835-pm", },
+ { .compatible = "brcm,bcm2711-pm", },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
EXPORT_SYMBOL(mfd_cell_disable);
#if IS_ENABLED(CONFIG_ACPI)
+struct match_ids_walk_data {
+ struct acpi_device_id *ids;
+ struct acpi_device *adev;
+};
+
+static int match_device_ids(struct acpi_device *adev, void *data)
+{
+ struct match_ids_walk_data *wd = data;
+
+ if (!acpi_match_device_ids(adev, wd->ids)) {
+ wd->adev = adev;
+ return 1;
+ }
+
+ return 0;
+}
+
static void mfd_acpi_add_device(const struct mfd_cell *cell,
struct platform_device *pdev)
{
const struct mfd_cell_acpi_match *match = cell->acpi_match;
- struct acpi_device *parent, *child;
struct acpi_device *adev = NULL;
+ struct acpi_device *parent;
parent = ACPI_COMPANION(pdev->dev.parent);
if (!parent)
if (match) {
if (match->pnpid) {
struct acpi_device_id ids[2] = {};
+ struct match_ids_walk_data wd = {
+ .adev = NULL,
+ .ids = ids,
+ };
strlcpy(ids[0].id, match->pnpid, sizeof(ids[0].id));
- list_for_each_entry(child, &parent->children, node) {
- if (!acpi_match_device_ids(child, ids)) {
- adev = child;
- break;
- }
- }
+ acpi_dev_for_each_child(parent, match_device_ids, &wd);
+ adev = wd.adev;
} else {
adev = acpi_find_child_device(parent, match->adr, false);
}
{
struct device *dev = &pdev->dev;
const struct sdhci_acpi_slot *slot;
- struct acpi_device *device, *child;
const struct dmi_system_id *id;
+ struct acpi_device *device;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
slot = sdhci_acpi_get_slot(device);
/* Power on the SDHCI controller and its children */
- acpi_device_fix_up_power(device);
- list_for_each_entry(child, &device->children, node)
- if (child->status.present && child->status.enabled)
- acpi_device_fix_up_power(child);
+ acpi_device_fix_up_power_extended(device);
if (sdhci_acpi_byt_defer(dev))
return -EPROBE_DEFER;
#ifdef CONFIG_ACPI
static void intel_mrfld_mmc_fix_up_power_slot(struct sdhci_pci_slot *slot)
{
- struct acpi_device *device, *child;
+ struct acpi_device *device;
device = ACPI_COMPANION(&slot->chip->pdev->dev);
- if (!device)
- return;
-
- acpi_device_fix_up_power(device);
- list_for_each_entry(child, &device->children, node)
- if (child->status.present && child->status.enabled)
- acpi_device_fix_up_power(child);
+ if (device)
+ acpi_device_fix_up_power_extended(device);
}
#else
static inline void intel_mrfld_mmc_fix_up_power_slot(struct sdhci_pci_slot *slot) {}
int ref_ok, struct funeth_txq *xdp_q)
{
struct bpf_prog *xdp_prog;
+ struct xdp_frame *xdpf;
struct xdp_buff xdp;
u32 act;
case XDP_TX:
if (unlikely(!ref_ok))
goto pass;
- if (!fun_xdp_tx(xdp_q, xdp.data, xdp.data_end - xdp.data))
+
+ xdpf = xdp_convert_buff_to_frame(&xdp);
+ if (!xdpf || !fun_xdp_tx(xdp_q, xdpf))
goto xdp_error;
FUN_QSTAT_INC(q, xdp_tx);
q->xdp_flush |= FUN_XDP_FLUSH_TX;
do {
fun_xdp_unmap(q, reclaim_idx);
- page_frag_free(q->info[reclaim_idx].vaddr);
+ xdp_return_frame(q->info[reclaim_idx].xdpf);
trace_funeth_tx_free(q, reclaim_idx, 1, head);
return npkts;
}
-bool fun_xdp_tx(struct funeth_txq *q, void *data, unsigned int len)
+bool fun_xdp_tx(struct funeth_txq *q, struct xdp_frame *xdpf)
{
struct fun_eth_tx_req *req;
struct fun_dataop_gl *gle;
- unsigned int idx;
+ unsigned int idx, len;
dma_addr_t dma;
if (fun_txq_avail(q) < FUN_XDP_CLEAN_THRES)
return false;
}
- dma = dma_map_single(q->dma_dev, data, len, DMA_TO_DEVICE);
+ len = xdpf->len;
+ dma = dma_map_single(q->dma_dev, xdpf->data, len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(q->dma_dev, dma))) {
FUN_QSTAT_INC(q, tx_map_err);
return false;
gle = (struct fun_dataop_gl *)req->dataop.imm;
fun_dataop_gl_init(gle, 0, 0, len, dma);
- q->info[idx].vaddr = data;
+ q->info[idx].xdpf = xdpf;
u64_stats_update_begin(&q->syncp);
q->stats.tx_bytes += len;
if (unlikely(q_idx >= fp->num_xdpqs))
return -ENXIO;
- for (q = xdpqs[q_idx], i = 0; i < n; i++) {
- const struct xdp_frame *xdpf = frames[i];
-
- if (!fun_xdp_tx(q, xdpf->data, xdpf->len))
+ for (q = xdpqs[q_idx], i = 0; i < n; i++)
+ if (!fun_xdp_tx(q, frames[i]))
break;
- }
if (unlikely(flags & XDP_XMIT_FLUSH))
fun_txq_wr_db(q);
unsigned int idx = q->cons_cnt & q->mask;
fun_xdp_unmap(q, idx);
- page_frag_free(q->info[idx].vaddr);
+ xdp_return_frame(q->info[idx].xdpf);
q->cons_cnt++;
}
}
struct funeth_tx_info { /* per Tx descriptor state */
union {
- struct sk_buff *skb; /* associated packet */
- void *vaddr; /* start address for XDP */
+ struct sk_buff *skb; /* associated packet (sk_buff path) */
+ struct xdp_frame *xdpf; /* associated XDP frame (XDP path) */
};
};
int fun_rxq_napi_poll(struct napi_struct *napi, int budget);
int fun_txq_napi_poll(struct napi_struct *napi, int budget);
netdev_tx_t fun_start_xmit(struct sk_buff *skb, struct net_device *netdev);
-bool fun_xdp_tx(struct funeth_txq *q, void *data, unsigned int len);
+bool fun_xdp_tx(struct funeth_txq *q, struct xdp_frame *xdpf);
int fun_xdp_xmit_frames(struct net_device *dev, int n,
struct xdp_frame **frames, u32 flags);
* non-zero req_queue_pairs says that user requested a new
* queue count via ethtool's set_channels, so use this
* value for queues distribution across traffic classes
+ * We need at least one queue pair for the interface
+ * to be usable as we see in else statement.
*/
if (vsi->req_queue_pairs > 0)
vsi->num_queue_pairs = vsi->req_queue_pairs;
else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
vsi->num_queue_pairs = pf->num_lan_msix;
+ else
+ vsi->num_queue_pairs = 1;
}
/* Number of queues per enabled TC */
rx_desc = ICE_RX_DESC(rx_ring, i);
if (!(rx_desc->wb.status_error0 &
- cpu_to_le16(ICE_TX_DESC_CMD_EOP | ICE_TX_DESC_CMD_RS)))
+ (cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S)) |
+ cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_EOF_S)))))
continue;
rx_buf = &rx_ring->rx_buf[i];
ice_set_safe_mode_caps(hw);
}
+ hw->ucast_shared = true;
+
err = ice_init_pf(pf);
if (err) {
dev_err(dev, "ice_init_pf failed: %d\n", err);
if (vsi->netdev) {
ice_set_rx_mode(vsi->netdev);
- err = ice_vsi_vlan_setup(vsi);
+ if (vsi->type != ICE_VSI_LB) {
+ err = ice_vsi_vlan_setup(vsi);
- if (err)
- return err;
+ if (err)
+ return err;
+ }
}
ice_vsi_cfg_dcb_rings(vsi);
return ret;
}
-/**
- * ice_unicast_mac_exists - check if the unicast MAC exists on the PF's switch
- * @pf: PF used to reference the switch's rules
- * @umac: unicast MAC to compare against existing switch rules
- *
- * Return true on the first/any match, else return false
- */
-static bool ice_unicast_mac_exists(struct ice_pf *pf, u8 *umac)
-{
- struct ice_sw_recipe *mac_recipe_list =
- &pf->hw.switch_info->recp_list[ICE_SW_LKUP_MAC];
- struct ice_fltr_mgmt_list_entry *list_itr;
- struct list_head *rule_head;
- struct mutex *rule_lock; /* protect MAC filter list access */
-
- rule_head = &mac_recipe_list->filt_rules;
- rule_lock = &mac_recipe_list->filt_rule_lock;
-
- mutex_lock(rule_lock);
- list_for_each_entry(list_itr, rule_head, list_entry) {
- u8 *existing_mac = &list_itr->fltr_info.l_data.mac.mac_addr[0];
-
- if (ether_addr_equal(existing_mac, umac)) {
- mutex_unlock(rule_lock);
- return true;
- }
- }
-
- mutex_unlock(rule_lock);
-
- return false;
-}
-
/**
* ice_set_vf_mac
* @netdev: network interface device structure
if (ret)
goto out_put_vf;
- if (ice_unicast_mac_exists(pf, mac)) {
- netdev_err(netdev, "Unicast MAC %pM already exists on this PF. Preventing setting VF %u unicast MAC address to %pM\n",
- mac, vf_id, mac);
- ret = -EINVAL;
- goto out_put_vf;
- }
-
mutex_lock(&vf->cfg_lock);
/* VF is notified of its new MAC via the PF's response to the
protocol = vlan_get_protocol(skb);
- if (eth_p_mpls(protocol))
+ if (eth_p_mpls(protocol)) {
ip.hdr = skb_inner_network_header(skb);
- else
+ l4.hdr = skb_checksum_start(skb);
+ } else {
ip.hdr = skb_network_header(skb);
- l4.hdr = skb_checksum_start(skb);
+ l4.hdr = skb_transport_header(skb);
+ }
/* compute outer L2 header size */
l2_len = ip.hdr - skb->data;
struct virtchnl_vlan_filtering_caps *vfc,
struct virtchnl_vlan_filter_list_v2 *vfl)
{
- u16 num_requested_filters = vsi->num_vlan + vfl->num_elements;
+ u16 num_requested_filters = ice_vsi_num_non_zero_vlans(vsi) +
+ vfl->num_elements;
if (num_requested_filters > vfc->max_filters)
return false;
#define MAX_RATE_EXPONENT 0x0FULL
#define MAX_RATE_MANTISSA 0xFFULL
+#define CN10K_MAX_BURST_MANTISSA 0x7FFFULL
+#define CN10K_MAX_BURST_SIZE 8453888ULL
+
/* Bitfields in NIX_TLX_PIR register */
#define TLX_RATE_MANTISSA GENMASK_ULL(8, 1)
#define TLX_RATE_EXPONENT GENMASK_ULL(12, 9)
#define TLX_BURST_MANTISSA GENMASK_ULL(36, 29)
#define TLX_BURST_EXPONENT GENMASK_ULL(40, 37)
+#define CN10K_TLX_BURST_MANTISSA GENMASK_ULL(43, 29)
+#define CN10K_TLX_BURST_EXPONENT GENMASK_ULL(47, 44)
+
struct otx2_tc_flow_stats {
u64 bytes;
u64 pkts;
}
EXPORT_SYMBOL(otx2_tc_alloc_ent_bitmap);
-static void otx2_get_egress_burst_cfg(u32 burst, u32 *burst_exp,
- u32 *burst_mantissa)
+static void otx2_get_egress_burst_cfg(struct otx2_nic *nic, u32 burst,
+ u32 *burst_exp, u32 *burst_mantissa)
{
+ int max_burst, max_mantissa;
unsigned int tmp;
+ if (is_dev_otx2(nic->pdev)) {
+ max_burst = MAX_BURST_SIZE;
+ max_mantissa = MAX_BURST_MANTISSA;
+ } else {
+ max_burst = CN10K_MAX_BURST_SIZE;
+ max_mantissa = CN10K_MAX_BURST_MANTISSA;
+ }
+
/* Burst is calculated as
* ((256 + BURST_MANTISSA) << (1 + BURST_EXPONENT)) / 256
* Max supported burst size is 130,816 bytes.
*/
- burst = min_t(u32, burst, MAX_BURST_SIZE);
+ burst = min_t(u32, burst, max_burst);
if (burst) {
*burst_exp = ilog2(burst) ? ilog2(burst) - 1 : 0;
tmp = burst - rounddown_pow_of_two(burst);
- if (burst < MAX_BURST_MANTISSA)
+ if (burst < max_mantissa)
*burst_mantissa = tmp * 2;
else
*burst_mantissa = tmp / (1ULL << (*burst_exp - 7));
} else {
*burst_exp = MAX_BURST_EXPONENT;
- *burst_mantissa = MAX_BURST_MANTISSA;
+ *burst_mantissa = max_mantissa;
}
}
-static void otx2_get_egress_rate_cfg(u32 maxrate, u32 *exp,
+static void otx2_get_egress_rate_cfg(u64 maxrate, u32 *exp,
u32 *mantissa, u32 *div_exp)
{
- unsigned int tmp;
+ u64 tmp;
/* Rate calculation by hardware
*
}
}
-static int otx2_set_matchall_egress_rate(struct otx2_nic *nic, u32 burst, u32 maxrate)
+static u64 otx2_get_txschq_rate_regval(struct otx2_nic *nic,
+ u64 maxrate, u32 burst)
{
- struct otx2_hw *hw = &nic->hw;
- struct nix_txschq_config *req;
u32 burst_exp, burst_mantissa;
u32 exp, mantissa, div_exp;
+ u64 regval = 0;
+
+ /* Get exponent and mantissa values from the desired rate */
+ otx2_get_egress_burst_cfg(nic, burst, &burst_exp, &burst_mantissa);
+ otx2_get_egress_rate_cfg(maxrate, &exp, &mantissa, &div_exp);
+
+ if (is_dev_otx2(nic->pdev)) {
+ regval = FIELD_PREP(TLX_BURST_EXPONENT, (u64)burst_exp) |
+ FIELD_PREP(TLX_BURST_MANTISSA, (u64)burst_mantissa) |
+ FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
+ FIELD_PREP(TLX_RATE_EXPONENT, exp) |
+ FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+ } else {
+ regval = FIELD_PREP(CN10K_TLX_BURST_EXPONENT, (u64)burst_exp) |
+ FIELD_PREP(CN10K_TLX_BURST_MANTISSA, (u64)burst_mantissa) |
+ FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
+ FIELD_PREP(TLX_RATE_EXPONENT, exp) |
+ FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+ }
+
+ return regval;
+}
+
+static int otx2_set_matchall_egress_rate(struct otx2_nic *nic,
+ u32 burst, u64 maxrate)
+{
+ struct otx2_hw *hw = &nic->hw;
+ struct nix_txschq_config *req;
int txschq, err;
/* All SQs share the same TL4, so pick the first scheduler */
txschq = hw->txschq_list[NIX_TXSCH_LVL_TL4][0];
- /* Get exponent and mantissa values from the desired rate */
- otx2_get_egress_burst_cfg(burst, &burst_exp, &burst_mantissa);
- otx2_get_egress_rate_cfg(maxrate, &exp, &mantissa, &div_exp);
-
mutex_lock(&nic->mbox.lock);
req = otx2_mbox_alloc_msg_nix_txschq_cfg(&nic->mbox);
if (!req) {
req->lvl = NIX_TXSCH_LVL_TL4;
req->num_regs = 1;
req->reg[0] = NIX_AF_TL4X_PIR(txschq);
- req->regval[0] = FIELD_PREP(TLX_BURST_EXPONENT, burst_exp) |
- FIELD_PREP(TLX_BURST_MANTISSA, burst_mantissa) |
- FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
- FIELD_PREP(TLX_RATE_EXPONENT, exp) |
- FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+ req->regval[0] = otx2_get_txschq_rate_regval(nic, maxrate, burst);
err = otx2_sync_mbox_msg(&nic->mbox);
mutex_unlock(&nic->mbox.lock);
struct netlink_ext_ack *extack = cls->common.extack;
struct flow_action *actions = &cls->rule->action;
struct flow_action_entry *entry;
- u32 rate;
+ u64 rate;
int err;
err = otx2_tc_validate_flow(nic, actions, extack);
}
/* Convert bytes per second to Mbps */
rate = entry->police.rate_bytes_ps * 8;
- rate = max_t(u32, rate / 1000000, 1);
+ rate = max_t(u64, rate / 1000000, 1);
err = otx2_set_matchall_egress_rate(nic, entry->police.burst, rate);
if (err)
return err;
flow_spec->dport = match.key->dst;
flow_mask->dport = match.mask->dst;
- if (ip_proto == IPPROTO_UDP)
- req->features |= BIT_ULL(NPC_DPORT_UDP);
- else if (ip_proto == IPPROTO_TCP)
- req->features |= BIT_ULL(NPC_DPORT_TCP);
- else if (ip_proto == IPPROTO_SCTP)
- req->features |= BIT_ULL(NPC_DPORT_SCTP);
+
+ if (flow_mask->dport) {
+ if (ip_proto == IPPROTO_UDP)
+ req->features |= BIT_ULL(NPC_DPORT_UDP);
+ else if (ip_proto == IPPROTO_TCP)
+ req->features |= BIT_ULL(NPC_DPORT_TCP);
+ else if (ip_proto == IPPROTO_SCTP)
+ req->features |= BIT_ULL(NPC_DPORT_SCTP);
+ }
flow_spec->sport = match.key->src;
flow_mask->sport = match.mask->src;
- if (ip_proto == IPPROTO_UDP)
- req->features |= BIT_ULL(NPC_SPORT_UDP);
- else if (ip_proto == IPPROTO_TCP)
- req->features |= BIT_ULL(NPC_SPORT_TCP);
- else if (ip_proto == IPPROTO_SCTP)
- req->features |= BIT_ULL(NPC_SPORT_SCTP);
+
+ if (flow_mask->sport) {
+ if (ip_proto == IPPROTO_UDP)
+ req->features |= BIT_ULL(NPC_SPORT_UDP);
+ else if (ip_proto == IPPROTO_TCP)
+ req->features |= BIT_ULL(NPC_SPORT_TCP);
+ else if (ip_proto == IPPROTO_SCTP)
+ req->features |= BIT_ULL(NPC_SPORT_SCTP);
+ }
}
return otx2_tc_parse_actions(nic, &rule->action, req, f, node);
}
/* If the chain is ended by an load/store pair then this
- * could serve as the new head of the the next chain.
+ * could serve as the new head of the next chain.
*/
if (curr_pair_is_memcpy(meta1, meta2)) {
head_ld_meta = meta1;
tx_queue = efx_channel_get_tx_queue(ptp_data->channel, type);
if (tx_queue && tx_queue->timestamping) {
+ /* This code invokes normal driver TX code which is always
+ * protected from softirqs when called from generic TX code,
+ * which in turn disables preemption. Look at __dev_queue_xmit
+ * which uses rcu_read_lock_bh disabling preemption for RCU
+ * plus disabling softirqs. We do not need RCU reader
+ * protection here.
+ *
+ * Although it is theoretically safe for current PTP TX/RX code
+ * running without disabling softirqs, there are three good
+ * reasond for doing so:
+ *
+ * 1) The code invoked is mainly implemented for non-PTP
+ * packets and it is always executed with softirqs
+ * disabled.
+ * 2) This being a single PTP packet, better to not
+ * interrupt its processing by softirqs which can lead
+ * to high latencies.
+ * 3) netdev_xmit_more checks preemption is disabled and
+ * triggers a BUG_ON if not.
+ */
+ local_bh_disable();
efx_enqueue_skb(tx_queue, skb);
+ local_bh_enable();
} else {
WARN_ONCE(1, "PTP channel has no timestamped tx queue\n");
dev_kfree_skb_any(skb);
ret = mediatek_dwmac_clks_config(priv_plat, true);
if (ret)
- return ret;
+ goto err_remove_config_dt;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret) {
- stmmac_remove_config_dt(pdev, plat_dat);
+ if (ret)
goto err_drv_probe;
- }
return 0;
err_drv_probe:
mediatek_dwmac_clks_config(priv_plat, false);
+err_remove_config_dt:
+ stmmac_remove_config_dt(pdev, plat_dat);
+
return ret;
}
/* The response to a IPA_QMI_INIT_DRIVER request begins with a standard
* QMI response, but contains other information as well. Currently we
- * simply wait for the the INIT_DRIVER transaction to complete and
+ * simply wait for the INIT_DRIVER transaction to complete and
* ignore any other data that might be returned.
*/
struct ipa_init_modem_driver_rsp {
#define DEFAULT_SEND_SCI true
#define DEFAULT_ENCRYPT false
#define DEFAULT_ENCODING_SA 0
+#define MACSEC_XPN_MAX_REPLAY_WINDOW (((1 << 30) - 1))
static bool send_sci(const struct macsec_secy *secy)
{
return false;
if (attrs[MACSEC_SA_ATTR_PN] &&
- *(u64 *)nla_data(attrs[MACSEC_SA_ATTR_PN]) == 0)
+ nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
return false;
if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
}
pn_len = secy->xpn ? MACSEC_XPN_PN_LEN : MACSEC_DEFAULT_PN_LEN;
- if (nla_len(tb_sa[MACSEC_SA_ATTR_PN]) != pn_len) {
+ if (tb_sa[MACSEC_SA_ATTR_PN] &&
+ nla_len(tb_sa[MACSEC_SA_ATTR_PN]) != pn_len) {
pr_notice("macsec: nl: add_rxsa: bad pn length: %d != %d\n",
nla_len(tb_sa[MACSEC_SA_ATTR_PN]), pn_len);
rtnl_unlock();
if (nla_len(tb_sa[MACSEC_SA_ATTR_SALT]) != MACSEC_SALT_LEN) {
pr_notice("macsec: nl: add_rxsa: bad salt length: %d != %d\n",
nla_len(tb_sa[MACSEC_SA_ATTR_SALT]),
- MACSEC_SA_ATTR_SALT);
+ MACSEC_SALT_LEN);
rtnl_unlock();
return -EINVAL;
}
return 0;
cleanup:
- kfree(rx_sa);
+ macsec_rxsa_put(rx_sa);
rtnl_unlock();
return err;
}
if (nla_get_u8(attrs[MACSEC_SA_ATTR_AN]) >= MACSEC_NUM_AN)
return false;
- if (nla_get_u32(attrs[MACSEC_SA_ATTR_PN]) == 0)
+ if (nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
return false;
if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
if (nla_len(tb_sa[MACSEC_SA_ATTR_SALT]) != MACSEC_SALT_LEN) {
pr_notice("macsec: nl: add_txsa: bad salt length: %d != %d\n",
nla_len(tb_sa[MACSEC_SA_ATTR_SALT]),
- MACSEC_SA_ATTR_SALT);
+ MACSEC_SALT_LEN);
rtnl_unlock();
return -EINVAL;
}
cleanup:
secy->operational = was_operational;
- kfree(tx_sa);
+ macsec_txsa_put(tx_sa);
rtnl_unlock();
return err;
}
if (nla_get_u8(attrs[MACSEC_SA_ATTR_AN]) >= MACSEC_NUM_AN)
return false;
- if (attrs[MACSEC_SA_ATTR_PN] && nla_get_u32(attrs[MACSEC_SA_ATTR_PN]) == 0)
+ if (attrs[MACSEC_SA_ATTR_PN] && nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
return false;
if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
secy->operational = tx_sa && tx_sa->active;
}
- if (data[IFLA_MACSEC_WINDOW])
- secy->replay_window = nla_get_u32(data[IFLA_MACSEC_WINDOW]);
-
if (data[IFLA_MACSEC_ENCRYPT])
tx_sc->encrypt = !!nla_get_u8(data[IFLA_MACSEC_ENCRYPT]);
}
}
+ if (data[IFLA_MACSEC_WINDOW]) {
+ secy->replay_window = nla_get_u32(data[IFLA_MACSEC_WINDOW]);
+
+ /* IEEE 802.1AEbw-2013 10.7.8 - maximum replay window
+ * for XPN cipher suites */
+ if (secy->xpn &&
+ secy->replay_window > MACSEC_XPN_MAX_REPLAY_WINDOW)
+ return -EINVAL;
+ }
+
return 0;
}
ret = macsec_changelink_common(dev, data);
if (ret)
- return ret;
+ goto cleanup;
/* If h/w offloading is available, propagate to the device */
if (macsec_is_offloaded(macsec)) {
*/
ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS);
if (ret < 0)
- return false;
+ return ret;
if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
int speed_value;
int can_low_power = 1;
if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
can_low_power = 0;
+ of_node_put(np);
if (can_low_power) {
/* Enable automatic low-power */
sungem_phy_write(phy, 0x1c, 0x9002);
/* Packet virtio header size */
u8 hdr_len;
- /* Work struct for refilling if we run low on memory. */
+ /* Work struct for delayed refilling if we run low on memory. */
struct delayed_work refill;
+ /* Is delayed refill enabled? */
+ bool refill_enabled;
+
+ /* The lock to synchronize the access to refill_enabled */
+ spinlock_t refill_lock;
+
/* Work struct for config space updates */
struct work_struct config_work;
return p;
}
+static void enable_delayed_refill(struct virtnet_info *vi)
+{
+ spin_lock_bh(&vi->refill_lock);
+ vi->refill_enabled = true;
+ spin_unlock_bh(&vi->refill_lock);
+}
+
+static void disable_delayed_refill(struct virtnet_info *vi)
+{
+ spin_lock_bh(&vi->refill_lock);
+ vi->refill_enabled = false;
+ spin_unlock_bh(&vi->refill_lock);
+}
+
static void virtqueue_napi_schedule(struct napi_struct *napi,
struct virtqueue *vq)
{
}
if (rq->vq->num_free > min((unsigned int)budget, virtqueue_get_vring_size(rq->vq)) / 2) {
- if (!try_fill_recv(vi, rq, GFP_ATOMIC))
- schedule_delayed_work(&vi->refill, 0);
+ if (!try_fill_recv(vi, rq, GFP_ATOMIC)) {
+ spin_lock(&vi->refill_lock);
+ if (vi->refill_enabled)
+ schedule_delayed_work(&vi->refill, 0);
+ spin_unlock(&vi->refill_lock);
+ }
}
u64_stats_update_begin(&rq->stats.syncp);
struct virtnet_info *vi = netdev_priv(dev);
int i, err;
+ enable_delayed_refill(vi);
+
for (i = 0; i < vi->max_queue_pairs; i++) {
if (i < vi->curr_queue_pairs)
/* Make sure we have some buffers: if oom use wq. */
struct virtnet_info *vi = netdev_priv(dev);
int i;
+ /* Make sure NAPI doesn't schedule refill work */
+ disable_delayed_refill(vi);
/* Make sure refill_work doesn't re-enable napi! */
cancel_delayed_work_sync(&vi->refill);
virtio_device_ready(vdev);
+ enable_delayed_refill(vi);
+
if (netif_running(vi->dev)) {
err = virtnet_open(vi->dev);
if (err)
vdev->priv = vi;
INIT_WORK(&vi->config_work, virtnet_config_changed_work);
+ spin_lock_init(&vi->refill_lock);
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
.driver_data = NVME_QUIRK_BOGUS_NID, },
{ PCI_DEVICE(0x1e49, 0x0041), /* ZHITAI TiPro7000 NVMe SSD */
.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
+ { PCI_DEVICE(0xc0a9, 0x540a), /* Crucial P2 */
+ .driver_data = NVME_QUIRK_BOGUS_NID, },
{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0061),
.driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, },
{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0065),
* Copyright (C) 2016 IBM Corporation
*/
+#include <linux/ima.h>
#include <linux/kernel.h>
#include <linux/kexec.h>
#include <linux/memblock.h>
return 0;
}
+#ifdef CONFIG_HAVE_IMA_KEXEC
/**
* ima_get_kexec_buffer - get IMA buffer from the previous kernel
* @addr: On successful return, set to point to the buffer contents.
*
* Return: 0 on success, negative errno on error.
*/
-int ima_get_kexec_buffer(void **addr, size_t *size)
+int __init ima_get_kexec_buffer(void **addr, size_t *size)
{
int ret, len;
unsigned long tmp_addr;
size_t tmp_size;
const void *prop;
- if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
- return -ENOTSUPP;
-
prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len);
if (!prop)
return -ENOENT;
/**
* ima_free_kexec_buffer - free memory used by the IMA buffer
*/
-int ima_free_kexec_buffer(void)
+int __init ima_free_kexec_buffer(void)
{
int ret;
unsigned long addr;
size_t size;
struct property *prop;
- if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
- return -ENOTSUPP;
-
prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL);
if (!prop)
return -ENOENT;
return memblock_phys_free(addr, size);
}
+#endif
/**
* remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
if (dest_cpu < 0)
return -1;
- cpumask_copy(irq_data_get_affinity_mask(d), cpumask_of(dest_cpu));
+ irq_data_update_affinity(d, cpumask_of(dest_cpu));
vi->txn_addr = txn_affinity_addr(d->irq, dest_cpu);
spin_lock_irqsave(&iosapic_lock, flags);
struct hv_retarget_device_interrupt *params;
struct tran_int_desc *int_desc;
struct hv_pcibus_device *hbus;
- struct cpumask *dest;
+ const struct cpumask *dest;
cpumask_var_t tmp;
struct pci_bus *pbus;
struct pci_dev *pdev;
}
static u32 hv_compose_msi_req_v1(
- struct pci_create_interrupt *int_pkt, struct cpumask *affinity,
+ struct pci_create_interrupt *int_pkt, const struct cpumask *affinity,
u32 slot, u8 vector, u8 vector_count)
{
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE;
* Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten
* by subsequent retarget in hv_irq_unmask().
*/
-static int hv_compose_msi_req_get_cpu(struct cpumask *affinity)
+static int hv_compose_msi_req_get_cpu(const struct cpumask *affinity)
{
return cpumask_first_and(affinity, cpu_online_mask);
}
static u32 hv_compose_msi_req_v2(
- struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity,
+ struct pci_create_interrupt2 *int_pkt, const struct cpumask *affinity,
u32 slot, u8 vector, u8 vector_count)
{
int cpu;
}
static u32 hv_compose_msi_req_v3(
- struct pci_create_interrupt3 *int_pkt, struct cpumask *affinity,
+ struct pci_create_interrupt3 *int_pkt, const struct cpumask *affinity,
u32 slot, u32 vector, u8 vector_count)
{
int cpu;
struct hv_pci_dev *hpdev;
struct pci_bus *pbus;
struct pci_dev *pdev;
- struct cpumask *dest;
+ const struct cpumask *dest;
struct compose_comp_ctxt comp;
struct tran_int_desc *int_desc;
struct msi_desc *msi_desc;
/*
* To handle interrupt latency, we always reprogram the period
- * regardlesss of PERF_EF_RELOAD.
+ * regardless of PERF_EF_RELOAD.
*/
if (pmu_flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
*/
.used_mask = mask,
};
- memset(mask, 0, BITS_TO_LONGS(cci_pmu->num_cntrs) * sizeof(unsigned long));
+ bitmap_zero(mask, cci_pmu->num_cntrs);
if (!validate_event(event->pmu, &fake_pmu, leader))
return -EINVAL;
GFP_KERNEL);
if (!cci_pmu->hw_events.events)
return ERR_PTR(-ENOMEM);
- cci_pmu->hw_events.used_mask = devm_kcalloc(dev,
- BITS_TO_LONGS(CCI_PMU_MAX_HW_CNTRS(model)),
- sizeof(*cci_pmu->hw_events.used_mask),
- GFP_KERNEL);
+ cci_pmu->hw_events.used_mask = devm_bitmap_zalloc(dev,
+ CCI_PMU_MAX_HW_CNTRS(model),
+ GFP_KERNEL);
if (!cci_pmu->hw_events.used_mask)
return ERR_PTR(-ENOMEM);
ccn->dt.cmp_mask[CCN_IDX_MASK_OPCODE].h = ~(0x1f << 9);
/* Get a convenient /sys/event_source/devices/ name */
- ccn->dt.id = ida_simple_get(&arm_ccn_pmu_ida, 0, 0, GFP_KERNEL);
+ ccn->dt.id = ida_alloc(&arm_ccn_pmu_ida, GFP_KERNEL);
if (ccn->dt.id == 0) {
name = "ccn";
} else {
&ccn->dt.node);
error_set_affinity:
error_choose_name:
- ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
+ ida_free(&arm_ccn_pmu_ida, ccn->dt.id);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
perf_pmu_unregister(&ccn->dt.pmu);
- ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
+ ida_free(&arm_ccn_pmu_ida, ccn->dt.id);
}
static int arm_ccn_for_each_valid_region(struct arm_ccn *ccn,
#include <asm/mmu.h>
#include <asm/sysreg.h>
+/*
+ * Cache if the event is allowed to trace Context information.
+ * This allows us to perform the check, i.e, perfmon_capable(),
+ * in the context of the event owner, once, during the event_init().
+ */
+#define SPE_PMU_HW_FLAGS_CX BIT(0)
+
+static void set_spe_event_has_cx(struct perf_event *event)
+{
+ if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
+ event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
+}
+
+static bool get_spe_event_has_cx(struct perf_event *event)
+{
+ return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX);
+}
+
#define ARM_SPE_BUF_PAD_BYTE 0
struct arm_spe_pmu_buf {
if (!attr->exclude_kernel)
reg |= BIT(SYS_PMSCR_EL1_E1SPE_SHIFT);
- if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
+ if (get_spe_event_has_cx(event))
reg |= BIT(SYS_PMSCR_EL1_CX_SHIFT);
return reg;
!(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
return -EOPNOTSUPP;
+ set_spe_event_has_cx(event);
reg = arm_spe_event_to_pmscr(event);
if (!perfmon_capable() &&
(reg & (BIT(SYS_PMSCR_EL1_PA_SHIFT) |
- BIT(SYS_PMSCR_EL1_CX_SHIFT) |
BIT(SYS_PMSCR_EL1_PCT_SHIFT))))
return -EACCES;
.dev = dev,
};
- pmu->id = ida_simple_get(&ddr_ida, 0, 0, GFP_KERNEL);
+ pmu->id = ida_alloc(&ddr_ida, GFP_KERNEL);
return pmu->id;
}
cpuhp_instance_err:
cpuhp_remove_multi_state(pmu->cpuhp_state);
cpuhp_state_err:
- ida_simple_remove(&ddr_ida, pmu->id);
+ ida_free(&ddr_ida, pmu->id);
dev_warn(&pdev->dev, "i.MX8 DDR Perf PMU failed (%d), disabled\n", ret);
return ret;
}
perf_pmu_unregister(&pmu->pmu);
- ida_simple_remove(&ddr_ida, pmu->id);
+ ida_free(&ddr_ida, pmu->id);
return 0;
}
RCiEP devices.
Adds the PCIe PMU into perf events system for monitoring latency,
bandwidth etc.
+
+config HNS3_PMU
+ tristate "HNS3 PERF PMU"
+ depends on ARM64 || COMPILE_TEST
+ depends on PCI
+ help
+ Provide support for HNS3 performance monitoring unit (PMU) RCiEP
+ devices.
+ Adds the HNS3 PMU into perf events system for monitoring latency,
+ bandwidth etc.
hisi_uncore_pa_pmu.o hisi_uncore_cpa_pmu.o
obj-$(CONFIG_HISI_PCIE_PMU) += hisi_pcie_pmu.o
+obj-$(CONFIG_HNS3_PMU) += hns3_pmu.o
"hisi_sccl%u_ddrc%u", ddrc_pmu->sccl_id,
ddrc_pmu->index_id);
- ddrc_pmu->pmu = (struct pmu) {
- .name = name,
- .module = THIS_MODULE,
- .task_ctx_nr = perf_invalid_context,
- .event_init = hisi_uncore_pmu_event_init,
- .pmu_enable = hisi_uncore_pmu_enable,
- .pmu_disable = hisi_uncore_pmu_disable,
- .add = hisi_uncore_pmu_add,
- .del = hisi_uncore_pmu_del,
- .start = hisi_uncore_pmu_start,
- .stop = hisi_uncore_pmu_stop,
- .read = hisi_uncore_pmu_read,
- .attr_groups = ddrc_pmu->pmu_events.attr_groups,
- .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
- };
+ hisi_pmu_init(&ddrc_pmu->pmu, name, ddrc_pmu->pmu_events.attr_groups, THIS_MODULE);
ret = perf_pmu_register(&ddrc_pmu->pmu, name, -1);
if (ret) {
name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sccl%u_hha%u",
hha_pmu->sccl_id, hha_pmu->index_id);
- hha_pmu->pmu = (struct pmu) {
- .name = name,
- .module = THIS_MODULE,
- .task_ctx_nr = perf_invalid_context,
- .event_init = hisi_uncore_pmu_event_init,
- .pmu_enable = hisi_uncore_pmu_enable,
- .pmu_disable = hisi_uncore_pmu_disable,
- .add = hisi_uncore_pmu_add,
- .del = hisi_uncore_pmu_del,
- .start = hisi_uncore_pmu_start,
- .stop = hisi_uncore_pmu_stop,
- .read = hisi_uncore_pmu_read,
- .attr_groups = hha_pmu->pmu_events.attr_groups,
- .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
- };
+ hisi_pmu_init(&hha_pmu->pmu, name, hha_pmu->pmu_events.attr_groups, THIS_MODULE);
ret = perf_pmu_register(&hha_pmu->pmu, name, -1);
if (ret) {
*/
name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sccl%u_l3c%u",
l3c_pmu->sccl_id, l3c_pmu->ccl_id);
- l3c_pmu->pmu = (struct pmu) {
- .name = name,
- .module = THIS_MODULE,
- .task_ctx_nr = perf_invalid_context,
- .event_init = hisi_uncore_pmu_event_init,
- .pmu_enable = hisi_uncore_pmu_enable,
- .pmu_disable = hisi_uncore_pmu_disable,
- .add = hisi_uncore_pmu_add,
- .del = hisi_uncore_pmu_del,
- .start = hisi_uncore_pmu_start,
- .stop = hisi_uncore_pmu_stop,
- .read = hisi_uncore_pmu_read,
- .attr_groups = l3c_pmu->pmu_events.attr_groups,
- .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
- };
+ hisi_pmu_init(&l3c_pmu->pmu, name, l3c_pmu->pmu_events.attr_groups, THIS_MODULE);
ret = perf_pmu_register(&l3c_pmu->pmu, name, -1);
if (ret) {
return ret;
}
- pa_pmu->pmu = (struct pmu) {
- .module = THIS_MODULE,
- .task_ctx_nr = perf_invalid_context,
- .event_init = hisi_uncore_pmu_event_init,
- .pmu_enable = hisi_uncore_pmu_enable,
- .pmu_disable = hisi_uncore_pmu_disable,
- .add = hisi_uncore_pmu_add,
- .del = hisi_uncore_pmu_del,
- .start = hisi_uncore_pmu_start,
- .stop = hisi_uncore_pmu_stop,
- .read = hisi_uncore_pmu_read,
- .attr_groups = pa_pmu->pmu_events.attr_groups,
- .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
- };
-
+ hisi_pmu_init(&pa_pmu->pmu, name, pa_pmu->pmu_events.attr_groups, THIS_MODULE);
ret = perf_pmu_register(&pa_pmu->pmu, name, -1);
if (ret) {
dev_err(pa_pmu->dev, "PMU register failed, ret = %d\n", ret);
}
EXPORT_SYMBOL_GPL(hisi_uncore_pmu_offline_cpu);
+void hisi_pmu_init(struct pmu *pmu, const char *name,
+ const struct attribute_group **attr_groups, struct module *module)
+{
+ pmu->name = name;
+ pmu->module = module;
+ pmu->task_ctx_nr = perf_invalid_context;
+ pmu->event_init = hisi_uncore_pmu_event_init;
+ pmu->pmu_enable = hisi_uncore_pmu_enable;
+ pmu->pmu_disable = hisi_uncore_pmu_disable;
+ pmu->add = hisi_uncore_pmu_add;
+ pmu->del = hisi_uncore_pmu_del;
+ pmu->start = hisi_uncore_pmu_start;
+ pmu->stop = hisi_uncore_pmu_stop;
+ pmu->read = hisi_uncore_pmu_read;
+ pmu->attr_groups = attr_groups;
+}
+EXPORT_SYMBOL_GPL(hisi_pmu_init);
+
MODULE_LICENSE("GPL v2");
int hisi_uncore_pmu_init_irq(struct hisi_pmu *hisi_pmu,
struct platform_device *pdev);
+void hisi_pmu_init(struct pmu *pmu, const char *name,
+ const struct attribute_group **attr_groups, struct module *module);
#endif /* __HISI_UNCORE_PMU_H__ */
return ret;
}
- sllc_pmu->pmu = (struct pmu) {
- .module = THIS_MODULE,
- .task_ctx_nr = perf_invalid_context,
- .event_init = hisi_uncore_pmu_event_init,
- .pmu_enable = hisi_uncore_pmu_enable,
- .pmu_disable = hisi_uncore_pmu_disable,
- .add = hisi_uncore_pmu_add,
- .del = hisi_uncore_pmu_del,
- .start = hisi_uncore_pmu_start,
- .stop = hisi_uncore_pmu_stop,
- .read = hisi_uncore_pmu_read,
- .attr_groups = sllc_pmu->pmu_events.attr_groups,
- .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
- };
+ hisi_pmu_init(&sllc_pmu->pmu, name, sllc_pmu->pmu_events.attr_groups, THIS_MODULE);
ret = perf_pmu_register(&sllc_pmu->pmu, name, -1);
if (ret) {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This driver adds support for HNS3 PMU iEP device. Related perf events are
+ * bandwidth, latency, packet rate, interrupt rate etc.
+ *
+ * Copyright (C) 2022 HiSilicon Limited
+ */
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci-epf.h>
+#include <linux/perf_event.h>
+#include <linux/smp.h>
+
+/* registers offset address */
+#define HNS3_PMU_REG_GLOBAL_CTRL 0x0000
+#define HNS3_PMU_REG_CLOCK_FREQ 0x0020
+#define HNS3_PMU_REG_BDF 0x0fe0
+#define HNS3_PMU_REG_VERSION 0x0fe4
+#define HNS3_PMU_REG_DEVICE_ID 0x0fe8
+
+#define HNS3_PMU_REG_EVENT_OFFSET 0x1000
+#define HNS3_PMU_REG_EVENT_SIZE 0x1000
+#define HNS3_PMU_REG_EVENT_CTRL_LOW 0x00
+#define HNS3_PMU_REG_EVENT_CTRL_HIGH 0x04
+#define HNS3_PMU_REG_EVENT_INTR_STATUS 0x08
+#define HNS3_PMU_REG_EVENT_INTR_MASK 0x0c
+#define HNS3_PMU_REG_EVENT_COUNTER 0x10
+#define HNS3_PMU_REG_EVENT_EXT_COUNTER 0x18
+#define HNS3_PMU_REG_EVENT_QID_CTRL 0x28
+#define HNS3_PMU_REG_EVENT_QID_PARA 0x2c
+
+#define HNS3_PMU_FILTER_SUPPORT_GLOBAL BIT(0)
+#define HNS3_PMU_FILTER_SUPPORT_PORT BIT(1)
+#define HNS3_PMU_FILTER_SUPPORT_PORT_TC BIT(2)
+#define HNS3_PMU_FILTER_SUPPORT_FUNC BIT(3)
+#define HNS3_PMU_FILTER_SUPPORT_FUNC_QUEUE BIT(4)
+#define HNS3_PMU_FILTER_SUPPORT_FUNC_INTR BIT(5)
+
+#define HNS3_PMU_FILTER_ALL_TC 0xf
+#define HNS3_PMU_FILTER_ALL_QUEUE 0xffff
+
+#define HNS3_PMU_CTRL_SUBEVENT_S 4
+#define HNS3_PMU_CTRL_FILTER_MODE_S 24
+
+#define HNS3_PMU_GLOBAL_START BIT(0)
+
+#define HNS3_PMU_EVENT_STATUS_RESET BIT(11)
+#define HNS3_PMU_EVENT_EN BIT(12)
+#define HNS3_PMU_EVENT_OVERFLOW_RESTART BIT(15)
+
+#define HNS3_PMU_QID_PARA_FUNC_S 0
+#define HNS3_PMU_QID_PARA_QUEUE_S 16
+
+#define HNS3_PMU_QID_CTRL_REQ_ENABLE BIT(0)
+#define HNS3_PMU_QID_CTRL_DONE BIT(1)
+#define HNS3_PMU_QID_CTRL_MISS BIT(2)
+
+#define HNS3_PMU_INTR_MASK_OVERFLOW BIT(1)
+
+#define HNS3_PMU_MAX_HW_EVENTS 8
+
+/*
+ * Each hardware event contains two registers (counter and ext_counter) for
+ * bandwidth, packet rate, latency and interrupt rate. These two registers will
+ * be triggered to run at the same when a hardware event is enabled. The meaning
+ * of counter and ext_counter of different event type are different, their
+ * meaning show as follow:
+ *
+ * +----------------+------------------+---------------+
+ * | event type | counter | ext_counter |
+ * +----------------+------------------+---------------+
+ * | bandwidth | byte number | cycle number |
+ * +----------------+------------------+---------------+
+ * | packet rate | packet number | cycle number |
+ * +----------------+------------------+---------------+
+ * | latency | cycle number | packet number |
+ * +----------------+------------------+---------------+
+ * | interrupt rate | interrupt number | cycle number |
+ * +----------------+------------------+---------------+
+ *
+ * The cycle number indicates increment of counter of hardware timer, the
+ * frequency of hardware timer can be read from hw_clk_freq file.
+ *
+ * Performance of each hardware event is calculated by: counter / ext_counter.
+ *
+ * Since processing of data is preferred to be done in userspace, we expose
+ * ext_counter as a separate event for userspace and use bit 16 to indicate it.
+ * For example, event 0x00001 and 0x10001 are actually one event for hardware
+ * because bit 0-15 are same. If the bit 16 of one event is 0 means to read
+ * counter register, otherwise means to read ext_counter register.
+ */
+/* bandwidth events */
+#define HNS3_PMU_EVT_BW_SSU_EGU_BYTE_NUM 0x00001
+#define HNS3_PMU_EVT_BW_SSU_EGU_TIME 0x10001
+#define HNS3_PMU_EVT_BW_SSU_RPU_BYTE_NUM 0x00002
+#define HNS3_PMU_EVT_BW_SSU_RPU_TIME 0x10002
+#define HNS3_PMU_EVT_BW_SSU_ROCE_BYTE_NUM 0x00003
+#define HNS3_PMU_EVT_BW_SSU_ROCE_TIME 0x10003
+#define HNS3_PMU_EVT_BW_ROCE_SSU_BYTE_NUM 0x00004
+#define HNS3_PMU_EVT_BW_ROCE_SSU_TIME 0x10004
+#define HNS3_PMU_EVT_BW_TPU_SSU_BYTE_NUM 0x00005
+#define HNS3_PMU_EVT_BW_TPU_SSU_TIME 0x10005
+#define HNS3_PMU_EVT_BW_RPU_RCBRX_BYTE_NUM 0x00006
+#define HNS3_PMU_EVT_BW_RPU_RCBRX_TIME 0x10006
+#define HNS3_PMU_EVT_BW_RCBTX_TXSCH_BYTE_NUM 0x00008
+#define HNS3_PMU_EVT_BW_RCBTX_TXSCH_TIME 0x10008
+#define HNS3_PMU_EVT_BW_WR_FBD_BYTE_NUM 0x00009
+#define HNS3_PMU_EVT_BW_WR_FBD_TIME 0x10009
+#define HNS3_PMU_EVT_BW_WR_EBD_BYTE_NUM 0x0000a
+#define HNS3_PMU_EVT_BW_WR_EBD_TIME 0x1000a
+#define HNS3_PMU_EVT_BW_RD_FBD_BYTE_NUM 0x0000b
+#define HNS3_PMU_EVT_BW_RD_FBD_TIME 0x1000b
+#define HNS3_PMU_EVT_BW_RD_EBD_BYTE_NUM 0x0000c
+#define HNS3_PMU_EVT_BW_RD_EBD_TIME 0x1000c
+#define HNS3_PMU_EVT_BW_RD_PAY_M0_BYTE_NUM 0x0000d
+#define HNS3_PMU_EVT_BW_RD_PAY_M0_TIME 0x1000d
+#define HNS3_PMU_EVT_BW_RD_PAY_M1_BYTE_NUM 0x0000e
+#define HNS3_PMU_EVT_BW_RD_PAY_M1_TIME 0x1000e
+#define HNS3_PMU_EVT_BW_WR_PAY_M0_BYTE_NUM 0x0000f
+#define HNS3_PMU_EVT_BW_WR_PAY_M0_TIME 0x1000f
+#define HNS3_PMU_EVT_BW_WR_PAY_M1_BYTE_NUM 0x00010
+#define HNS3_PMU_EVT_BW_WR_PAY_M1_TIME 0x10010
+
+/* packet rate events */
+#define HNS3_PMU_EVT_PPS_IGU_SSU_PACKET_NUM 0x00100
+#define HNS3_PMU_EVT_PPS_IGU_SSU_TIME 0x10100
+#define HNS3_PMU_EVT_PPS_SSU_EGU_PACKET_NUM 0x00101
+#define HNS3_PMU_EVT_PPS_SSU_EGU_TIME 0x10101
+#define HNS3_PMU_EVT_PPS_SSU_RPU_PACKET_NUM 0x00102
+#define HNS3_PMU_EVT_PPS_SSU_RPU_TIME 0x10102
+#define HNS3_PMU_EVT_PPS_SSU_ROCE_PACKET_NUM 0x00103
+#define HNS3_PMU_EVT_PPS_SSU_ROCE_TIME 0x10103
+#define HNS3_PMU_EVT_PPS_ROCE_SSU_PACKET_NUM 0x00104
+#define HNS3_PMU_EVT_PPS_ROCE_SSU_TIME 0x10104
+#define HNS3_PMU_EVT_PPS_TPU_SSU_PACKET_NUM 0x00105
+#define HNS3_PMU_EVT_PPS_TPU_SSU_TIME 0x10105
+#define HNS3_PMU_EVT_PPS_RPU_RCBRX_PACKET_NUM 0x00106
+#define HNS3_PMU_EVT_PPS_RPU_RCBRX_TIME 0x10106
+#define HNS3_PMU_EVT_PPS_RCBTX_TPU_PACKET_NUM 0x00107
+#define HNS3_PMU_EVT_PPS_RCBTX_TPU_TIME 0x10107
+#define HNS3_PMU_EVT_PPS_RCBTX_TXSCH_PACKET_NUM 0x00108
+#define HNS3_PMU_EVT_PPS_RCBTX_TXSCH_TIME 0x10108
+#define HNS3_PMU_EVT_PPS_WR_FBD_PACKET_NUM 0x00109
+#define HNS3_PMU_EVT_PPS_WR_FBD_TIME 0x10109
+#define HNS3_PMU_EVT_PPS_WR_EBD_PACKET_NUM 0x0010a
+#define HNS3_PMU_EVT_PPS_WR_EBD_TIME 0x1010a
+#define HNS3_PMU_EVT_PPS_RD_FBD_PACKET_NUM 0x0010b
+#define HNS3_PMU_EVT_PPS_RD_FBD_TIME 0x1010b
+#define HNS3_PMU_EVT_PPS_RD_EBD_PACKET_NUM 0x0010c
+#define HNS3_PMU_EVT_PPS_RD_EBD_TIME 0x1010c
+#define HNS3_PMU_EVT_PPS_RD_PAY_M0_PACKET_NUM 0x0010d
+#define HNS3_PMU_EVT_PPS_RD_PAY_M0_TIME 0x1010d
+#define HNS3_PMU_EVT_PPS_RD_PAY_M1_PACKET_NUM 0x0010e
+#define HNS3_PMU_EVT_PPS_RD_PAY_M1_TIME 0x1010e
+#define HNS3_PMU_EVT_PPS_WR_PAY_M0_PACKET_NUM 0x0010f
+#define HNS3_PMU_EVT_PPS_WR_PAY_M0_TIME 0x1010f
+#define HNS3_PMU_EVT_PPS_WR_PAY_M1_PACKET_NUM 0x00110
+#define HNS3_PMU_EVT_PPS_WR_PAY_M1_TIME 0x10110
+#define HNS3_PMU_EVT_PPS_NICROH_TX_PRE_PACKET_NUM 0x00111
+#define HNS3_PMU_EVT_PPS_NICROH_TX_PRE_TIME 0x10111
+#define HNS3_PMU_EVT_PPS_NICROH_RX_PRE_PACKET_NUM 0x00112
+#define HNS3_PMU_EVT_PPS_NICROH_RX_PRE_TIME 0x10112
+
+/* latency events */
+#define HNS3_PMU_EVT_DLY_TX_PUSH_TIME 0x00202
+#define HNS3_PMU_EVT_DLY_TX_PUSH_PACKET_NUM 0x10202
+#define HNS3_PMU_EVT_DLY_TX_TIME 0x00204
+#define HNS3_PMU_EVT_DLY_TX_PACKET_NUM 0x10204
+#define HNS3_PMU_EVT_DLY_SSU_TX_NIC_TIME 0x00206
+#define HNS3_PMU_EVT_DLY_SSU_TX_NIC_PACKET_NUM 0x10206
+#define HNS3_PMU_EVT_DLY_SSU_TX_ROCE_TIME 0x00207
+#define HNS3_PMU_EVT_DLY_SSU_TX_ROCE_PACKET_NUM 0x10207
+#define HNS3_PMU_EVT_DLY_SSU_RX_NIC_TIME 0x00208
+#define HNS3_PMU_EVT_DLY_SSU_RX_NIC_PACKET_NUM 0x10208
+#define HNS3_PMU_EVT_DLY_SSU_RX_ROCE_TIME 0x00209
+#define HNS3_PMU_EVT_DLY_SSU_RX_ROCE_PACKET_NUM 0x10209
+#define HNS3_PMU_EVT_DLY_RPU_TIME 0x0020e
+#define HNS3_PMU_EVT_DLY_RPU_PACKET_NUM 0x1020e
+#define HNS3_PMU_EVT_DLY_TPU_TIME 0x0020f
+#define HNS3_PMU_EVT_DLY_TPU_PACKET_NUM 0x1020f
+#define HNS3_PMU_EVT_DLY_RPE_TIME 0x00210
+#define HNS3_PMU_EVT_DLY_RPE_PACKET_NUM 0x10210
+#define HNS3_PMU_EVT_DLY_TPE_TIME 0x00211
+#define HNS3_PMU_EVT_DLY_TPE_PACKET_NUM 0x10211
+#define HNS3_PMU_EVT_DLY_TPE_PUSH_TIME 0x00212
+#define HNS3_PMU_EVT_DLY_TPE_PUSH_PACKET_NUM 0x10212
+#define HNS3_PMU_EVT_DLY_WR_FBD_TIME 0x00213
+#define HNS3_PMU_EVT_DLY_WR_FBD_PACKET_NUM 0x10213
+#define HNS3_PMU_EVT_DLY_WR_EBD_TIME 0x00214
+#define HNS3_PMU_EVT_DLY_WR_EBD_PACKET_NUM 0x10214
+#define HNS3_PMU_EVT_DLY_RD_FBD_TIME 0x00215
+#define HNS3_PMU_EVT_DLY_RD_FBD_PACKET_NUM 0x10215
+#define HNS3_PMU_EVT_DLY_RD_EBD_TIME 0x00216
+#define HNS3_PMU_EVT_DLY_RD_EBD_PACKET_NUM 0x10216
+#define HNS3_PMU_EVT_DLY_RD_PAY_M0_TIME 0x00217
+#define HNS3_PMU_EVT_DLY_RD_PAY_M0_PACKET_NUM 0x10217
+#define HNS3_PMU_EVT_DLY_RD_PAY_M1_TIME 0x00218
+#define HNS3_PMU_EVT_DLY_RD_PAY_M1_PACKET_NUM 0x10218
+#define HNS3_PMU_EVT_DLY_WR_PAY_M0_TIME 0x00219
+#define HNS3_PMU_EVT_DLY_WR_PAY_M0_PACKET_NUM 0x10219
+#define HNS3_PMU_EVT_DLY_WR_PAY_M1_TIME 0x0021a
+#define HNS3_PMU_EVT_DLY_WR_PAY_M1_PACKET_NUM 0x1021a
+#define HNS3_PMU_EVT_DLY_MSIX_WRITE_TIME 0x0021c
+#define HNS3_PMU_EVT_DLY_MSIX_WRITE_PACKET_NUM 0x1021c
+
+/* interrupt rate events */
+#define HNS3_PMU_EVT_PPS_MSIX_NIC_INTR_NUM 0x00300
+#define HNS3_PMU_EVT_PPS_MSIX_NIC_TIME 0x10300
+
+/* filter mode supported by each bandwidth event */
+#define HNS3_PMU_FILTER_BW_SSU_EGU 0x07
+#define HNS3_PMU_FILTER_BW_SSU_RPU 0x1f
+#define HNS3_PMU_FILTER_BW_SSU_ROCE 0x0f
+#define HNS3_PMU_FILTER_BW_ROCE_SSU 0x0f
+#define HNS3_PMU_FILTER_BW_TPU_SSU 0x1f
+#define HNS3_PMU_FILTER_BW_RPU_RCBRX 0x11
+#define HNS3_PMU_FILTER_BW_RCBTX_TXSCH 0x11
+#define HNS3_PMU_FILTER_BW_WR_FBD 0x1b
+#define HNS3_PMU_FILTER_BW_WR_EBD 0x11
+#define HNS3_PMU_FILTER_BW_RD_FBD 0x01
+#define HNS3_PMU_FILTER_BW_RD_EBD 0x1b
+#define HNS3_PMU_FILTER_BW_RD_PAY_M0 0x01
+#define HNS3_PMU_FILTER_BW_RD_PAY_M1 0x01
+#define HNS3_PMU_FILTER_BW_WR_PAY_M0 0x01
+#define HNS3_PMU_FILTER_BW_WR_PAY_M1 0x01
+
+/* filter mode supported by each packet rate event */
+#define HNS3_PMU_FILTER_PPS_IGU_SSU 0x07
+#define HNS3_PMU_FILTER_PPS_SSU_EGU 0x07
+#define HNS3_PMU_FILTER_PPS_SSU_RPU 0x1f
+#define HNS3_PMU_FILTER_PPS_SSU_ROCE 0x0f
+#define HNS3_PMU_FILTER_PPS_ROCE_SSU 0x0f
+#define HNS3_PMU_FILTER_PPS_TPU_SSU 0x1f
+#define HNS3_PMU_FILTER_PPS_RPU_RCBRX 0x11
+#define HNS3_PMU_FILTER_PPS_RCBTX_TPU 0x1f
+#define HNS3_PMU_FILTER_PPS_RCBTX_TXSCH 0x11
+#define HNS3_PMU_FILTER_PPS_WR_FBD 0x1b
+#define HNS3_PMU_FILTER_PPS_WR_EBD 0x11
+#define HNS3_PMU_FILTER_PPS_RD_FBD 0x01
+#define HNS3_PMU_FILTER_PPS_RD_EBD 0x1b
+#define HNS3_PMU_FILTER_PPS_RD_PAY_M0 0x01
+#define HNS3_PMU_FILTER_PPS_RD_PAY_M1 0x01
+#define HNS3_PMU_FILTER_PPS_WR_PAY_M0 0x01
+#define HNS3_PMU_FILTER_PPS_WR_PAY_M1 0x01
+#define HNS3_PMU_FILTER_PPS_NICROH_TX_PRE 0x01
+#define HNS3_PMU_FILTER_PPS_NICROH_RX_PRE 0x01
+
+/* filter mode supported by each latency event */
+#define HNS3_PMU_FILTER_DLY_TX_PUSH 0x01
+#define HNS3_PMU_FILTER_DLY_TX 0x01
+#define HNS3_PMU_FILTER_DLY_SSU_TX_NIC 0x07
+#define HNS3_PMU_FILTER_DLY_SSU_TX_ROCE 0x07
+#define HNS3_PMU_FILTER_DLY_SSU_RX_NIC 0x07
+#define HNS3_PMU_FILTER_DLY_SSU_RX_ROCE 0x07
+#define HNS3_PMU_FILTER_DLY_RPU 0x11
+#define HNS3_PMU_FILTER_DLY_TPU 0x1f
+#define HNS3_PMU_FILTER_DLY_RPE 0x01
+#define HNS3_PMU_FILTER_DLY_TPE 0x0b
+#define HNS3_PMU_FILTER_DLY_TPE_PUSH 0x1b
+#define HNS3_PMU_FILTER_DLY_WR_FBD 0x1b
+#define HNS3_PMU_FILTER_DLY_WR_EBD 0x11
+#define HNS3_PMU_FILTER_DLY_RD_FBD 0x01
+#define HNS3_PMU_FILTER_DLY_RD_EBD 0x1b
+#define HNS3_PMU_FILTER_DLY_RD_PAY_M0 0x01
+#define HNS3_PMU_FILTER_DLY_RD_PAY_M1 0x01
+#define HNS3_PMU_FILTER_DLY_WR_PAY_M0 0x01
+#define HNS3_PMU_FILTER_DLY_WR_PAY_M1 0x01
+#define HNS3_PMU_FILTER_DLY_MSIX_WRITE 0x01
+
+/* filter mode supported by each interrupt rate event */
+#define HNS3_PMU_FILTER_INTR_MSIX_NIC 0x01
+
+enum hns3_pmu_hw_filter_mode {
+ HNS3_PMU_HW_FILTER_GLOBAL,
+ HNS3_PMU_HW_FILTER_PORT,
+ HNS3_PMU_HW_FILTER_PORT_TC,
+ HNS3_PMU_HW_FILTER_FUNC,
+ HNS3_PMU_HW_FILTER_FUNC_QUEUE,
+ HNS3_PMU_HW_FILTER_FUNC_INTR,
+};
+
+struct hns3_pmu_event_attr {
+ u32 event;
+ u16 filter_support;
+};
+
+struct hns3_pmu {
+ struct perf_event *hw_events[HNS3_PMU_MAX_HW_EVENTS];
+ struct hlist_node node;
+ struct pci_dev *pdev;
+ struct pmu pmu;
+ void __iomem *base;
+ int irq;
+ int on_cpu;
+ u32 identifier;
+ u32 hw_clk_freq; /* hardware clock frequency of PMU */
+ /* maximum and minimum bdf allowed by PMU */
+ u16 bdf_min;
+ u16 bdf_max;
+};
+
+#define to_hns3_pmu(p) (container_of((p), struct hns3_pmu, pmu))
+
+#define GET_PCI_DEVFN(bdf) ((bdf) & 0xff)
+
+#define FILTER_CONDITION_PORT(port) ((1 << (port)) & 0xff)
+#define FILTER_CONDITION_PORT_TC(port, tc) (((port) << 3) | ((tc) & 0x07))
+#define FILTER_CONDITION_FUNC_INTR(func, intr) (((intr) << 8) | (func))
+
+#define HNS3_PMU_FILTER_ATTR(_name, _config, _start, _end) \
+ static inline u64 hns3_pmu_get_##_name(struct perf_event *event) \
+ { \
+ return FIELD_GET(GENMASK_ULL(_end, _start), \
+ event->attr._config); \
+ }
+
+HNS3_PMU_FILTER_ATTR(subevent, config, 0, 7);
+HNS3_PMU_FILTER_ATTR(event_type, config, 8, 15);
+HNS3_PMU_FILTER_ATTR(ext_counter_used, config, 16, 16);
+HNS3_PMU_FILTER_ATTR(port, config1, 0, 3);
+HNS3_PMU_FILTER_ATTR(tc, config1, 4, 7);
+HNS3_PMU_FILTER_ATTR(bdf, config1, 8, 23);
+HNS3_PMU_FILTER_ATTR(queue, config1, 24, 39);
+HNS3_PMU_FILTER_ATTR(intr, config1, 40, 51);
+HNS3_PMU_FILTER_ATTR(global, config1, 52, 52);
+
+#define HNS3_BW_EVT_BYTE_NUM(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_BW_##_name##_BYTE_NUM, \
+ HNS3_PMU_FILTER_BW_##_name})
+#define HNS3_BW_EVT_TIME(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_BW_##_name##_TIME, \
+ HNS3_PMU_FILTER_BW_##_name})
+#define HNS3_PPS_EVT_PACKET_NUM(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_PPS_##_name##_PACKET_NUM, \
+ HNS3_PMU_FILTER_PPS_##_name})
+#define HNS3_PPS_EVT_TIME(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_PPS_##_name##_TIME, \
+ HNS3_PMU_FILTER_PPS_##_name})
+#define HNS3_DLY_EVT_TIME(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_DLY_##_name##_TIME, \
+ HNS3_PMU_FILTER_DLY_##_name})
+#define HNS3_DLY_EVT_PACKET_NUM(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_DLY_##_name##_PACKET_NUM, \
+ HNS3_PMU_FILTER_DLY_##_name})
+#define HNS3_INTR_EVT_INTR_NUM(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_PPS_##_name##_INTR_NUM, \
+ HNS3_PMU_FILTER_INTR_##_name})
+#define HNS3_INTR_EVT_TIME(_name) (&(struct hns3_pmu_event_attr) {\
+ HNS3_PMU_EVT_PPS_##_name##_TIME, \
+ HNS3_PMU_FILTER_INTR_##_name})
+
+static ssize_t hns3_pmu_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr;
+
+ eattr = container_of(attr, struct dev_ext_attribute, attr);
+
+ return sysfs_emit(buf, "%s\n", (char *)eattr->var);
+}
+
+static ssize_t hns3_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hns3_pmu_event_attr *event;
+ struct dev_ext_attribute *eattr;
+
+ eattr = container_of(attr, struct dev_ext_attribute, attr);
+ event = eattr->var;
+
+ return sysfs_emit(buf, "config=0x%x\n", event->event);
+}
+
+static ssize_t hns3_pmu_filter_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hns3_pmu_event_attr *event;
+ struct dev_ext_attribute *eattr;
+ int len;
+
+ eattr = container_of(attr, struct dev_ext_attribute, attr);
+ event = eattr->var;
+
+ len = sysfs_emit_at(buf, 0, "filter mode supported: ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_GLOBAL)
+ len += sysfs_emit_at(buf, len, "global ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_PORT)
+ len += sysfs_emit_at(buf, len, "port ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_PORT_TC)
+ len += sysfs_emit_at(buf, len, "port-tc ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC)
+ len += sysfs_emit_at(buf, len, "func ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC_QUEUE)
+ len += sysfs_emit_at(buf, len, "func-queue ");
+ if (event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC_INTR)
+ len += sysfs_emit_at(buf, len, "func-intr ");
+
+ len += sysfs_emit_at(buf, len, "\n");
+
+ return len;
+}
+
+#define HNS3_PMU_ATTR(_name, _func, _config) \
+ (&((struct dev_ext_attribute[]) { \
+ { __ATTR(_name, 0444, _func, NULL), (void *)_config } \
+ })[0].attr.attr)
+
+#define HNS3_PMU_FORMAT_ATTR(_name, _format) \
+ HNS3_PMU_ATTR(_name, hns3_pmu_format_show, (void *)_format)
+#define HNS3_PMU_EVENT_ATTR(_name, _event) \
+ HNS3_PMU_ATTR(_name, hns3_pmu_event_show, (void *)_event)
+#define HNS3_PMU_FLT_MODE_ATTR(_name, _event) \
+ HNS3_PMU_ATTR(_name, hns3_pmu_filter_mode_show, (void *)_event)
+
+#define HNS3_PMU_BW_EVT_PAIR(_name, _macro) \
+ HNS3_PMU_EVENT_ATTR(_name##_byte_num, HNS3_BW_EVT_BYTE_NUM(_macro)), \
+ HNS3_PMU_EVENT_ATTR(_name##_time, HNS3_BW_EVT_TIME(_macro))
+#define HNS3_PMU_PPS_EVT_PAIR(_name, _macro) \
+ HNS3_PMU_EVENT_ATTR(_name##_packet_num, HNS3_PPS_EVT_PACKET_NUM(_macro)), \
+ HNS3_PMU_EVENT_ATTR(_name##_time, HNS3_PPS_EVT_TIME(_macro))
+#define HNS3_PMU_DLY_EVT_PAIR(_name, _macro) \
+ HNS3_PMU_EVENT_ATTR(_name##_time, HNS3_DLY_EVT_TIME(_macro)), \
+ HNS3_PMU_EVENT_ATTR(_name##_packet_num, HNS3_DLY_EVT_PACKET_NUM(_macro))
+#define HNS3_PMU_INTR_EVT_PAIR(_name, _macro) \
+ HNS3_PMU_EVENT_ATTR(_name##_intr_num, HNS3_INTR_EVT_INTR_NUM(_macro)), \
+ HNS3_PMU_EVENT_ATTR(_name##_time, HNS3_INTR_EVT_TIME(_macro))
+
+#define HNS3_PMU_BW_FLT_MODE_PAIR(_name, _macro) \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_byte_num, HNS3_BW_EVT_BYTE_NUM(_macro)), \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_time, HNS3_BW_EVT_TIME(_macro))
+#define HNS3_PMU_PPS_FLT_MODE_PAIR(_name, _macro) \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_packet_num, HNS3_PPS_EVT_PACKET_NUM(_macro)), \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_time, HNS3_PPS_EVT_TIME(_macro))
+#define HNS3_PMU_DLY_FLT_MODE_PAIR(_name, _macro) \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_time, HNS3_DLY_EVT_TIME(_macro)), \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_packet_num, HNS3_DLY_EVT_PACKET_NUM(_macro))
+#define HNS3_PMU_INTR_FLT_MODE_PAIR(_name, _macro) \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_intr_num, HNS3_INTR_EVT_INTR_NUM(_macro)), \
+ HNS3_PMU_FLT_MODE_ATTR(_name##_time, HNS3_INTR_EVT_TIME(_macro))
+
+static u8 hns3_pmu_hw_filter_modes[] = {
+ HNS3_PMU_HW_FILTER_GLOBAL,
+ HNS3_PMU_HW_FILTER_PORT,
+ HNS3_PMU_HW_FILTER_PORT_TC,
+ HNS3_PMU_HW_FILTER_FUNC,
+ HNS3_PMU_HW_FILTER_FUNC_QUEUE,
+ HNS3_PMU_HW_FILTER_FUNC_INTR,
+};
+
+#define HNS3_PMU_SET_HW_FILTER(_hwc, _mode) \
+ ((_hwc)->addr_filters = (void *)&hns3_pmu_hw_filter_modes[(_mode)])
+
+static ssize_t identifier_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(dev_get_drvdata(dev));
+
+ return sysfs_emit(buf, "0x%x\n", hns3_pmu->identifier);
+}
+static DEVICE_ATTR_RO(identifier);
+
+static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(dev_get_drvdata(dev));
+
+ return sysfs_emit(buf, "%d\n", hns3_pmu->on_cpu);
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static ssize_t bdf_min_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(dev_get_drvdata(dev));
+ u16 bdf = hns3_pmu->bdf_min;
+
+ return sysfs_emit(buf, "%02x:%02x.%x\n", PCI_BUS_NUM(bdf),
+ PCI_SLOT(bdf), PCI_FUNC(bdf));
+}
+static DEVICE_ATTR_RO(bdf_min);
+
+static ssize_t bdf_max_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(dev_get_drvdata(dev));
+ u16 bdf = hns3_pmu->bdf_max;
+
+ return sysfs_emit(buf, "%02x:%02x.%x\n", PCI_BUS_NUM(bdf),
+ PCI_SLOT(bdf), PCI_FUNC(bdf));
+}
+static DEVICE_ATTR_RO(bdf_max);
+
+static ssize_t hw_clk_freq_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(dev_get_drvdata(dev));
+
+ return sysfs_emit(buf, "%u\n", hns3_pmu->hw_clk_freq);
+}
+static DEVICE_ATTR_RO(hw_clk_freq);
+
+static struct attribute *hns3_pmu_events_attr[] = {
+ /* bandwidth events */
+ HNS3_PMU_BW_EVT_PAIR(bw_ssu_egu, SSU_EGU),
+ HNS3_PMU_BW_EVT_PAIR(bw_ssu_rpu, SSU_RPU),
+ HNS3_PMU_BW_EVT_PAIR(bw_ssu_roce, SSU_ROCE),
+ HNS3_PMU_BW_EVT_PAIR(bw_roce_ssu, ROCE_SSU),
+ HNS3_PMU_BW_EVT_PAIR(bw_tpu_ssu, TPU_SSU),
+ HNS3_PMU_BW_EVT_PAIR(bw_rpu_rcbrx, RPU_RCBRX),
+ HNS3_PMU_BW_EVT_PAIR(bw_rcbtx_txsch, RCBTX_TXSCH),
+ HNS3_PMU_BW_EVT_PAIR(bw_wr_fbd, WR_FBD),
+ HNS3_PMU_BW_EVT_PAIR(bw_wr_ebd, WR_EBD),
+ HNS3_PMU_BW_EVT_PAIR(bw_rd_fbd, RD_FBD),
+ HNS3_PMU_BW_EVT_PAIR(bw_rd_ebd, RD_EBD),
+ HNS3_PMU_BW_EVT_PAIR(bw_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_BW_EVT_PAIR(bw_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_BW_EVT_PAIR(bw_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_BW_EVT_PAIR(bw_wr_pay_m1, WR_PAY_M1),
+
+ /* packet rate events */
+ HNS3_PMU_PPS_EVT_PAIR(pps_igu_ssu, IGU_SSU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_ssu_egu, SSU_EGU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_ssu_rpu, SSU_RPU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_ssu_roce, SSU_ROCE),
+ HNS3_PMU_PPS_EVT_PAIR(pps_roce_ssu, ROCE_SSU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_tpu_ssu, TPU_SSU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rpu_rcbrx, RPU_RCBRX),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rcbtx_tpu, RCBTX_TPU),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rcbtx_txsch, RCBTX_TXSCH),
+ HNS3_PMU_PPS_EVT_PAIR(pps_wr_fbd, WR_FBD),
+ HNS3_PMU_PPS_EVT_PAIR(pps_wr_ebd, WR_EBD),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rd_fbd, RD_FBD),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rd_ebd, RD_EBD),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_PPS_EVT_PAIR(pps_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_PPS_EVT_PAIR(pps_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_PPS_EVT_PAIR(pps_wr_pay_m1, WR_PAY_M1),
+ HNS3_PMU_PPS_EVT_PAIR(pps_intr_nicroh_tx_pre, NICROH_TX_PRE),
+ HNS3_PMU_PPS_EVT_PAIR(pps_intr_nicroh_rx_pre, NICROH_RX_PRE),
+
+ /* latency events */
+ HNS3_PMU_DLY_EVT_PAIR(dly_tx_push_to_mac, TX_PUSH),
+ HNS3_PMU_DLY_EVT_PAIR(dly_tx_normal_to_mac, TX),
+ HNS3_PMU_DLY_EVT_PAIR(dly_ssu_tx_th_nic, SSU_TX_NIC),
+ HNS3_PMU_DLY_EVT_PAIR(dly_ssu_tx_th_roce, SSU_TX_ROCE),
+ HNS3_PMU_DLY_EVT_PAIR(dly_ssu_rx_th_nic, SSU_RX_NIC),
+ HNS3_PMU_DLY_EVT_PAIR(dly_ssu_rx_th_roce, SSU_RX_ROCE),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rpu, RPU),
+ HNS3_PMU_DLY_EVT_PAIR(dly_tpu, TPU),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rpe, RPE),
+ HNS3_PMU_DLY_EVT_PAIR(dly_tpe_normal, TPE),
+ HNS3_PMU_DLY_EVT_PAIR(dly_tpe_push, TPE_PUSH),
+ HNS3_PMU_DLY_EVT_PAIR(dly_wr_fbd, WR_FBD),
+ HNS3_PMU_DLY_EVT_PAIR(dly_wr_ebd, WR_EBD),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rd_fbd, RD_FBD),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rd_ebd, RD_EBD),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_DLY_EVT_PAIR(dly_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_DLY_EVT_PAIR(dly_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_DLY_EVT_PAIR(dly_wr_pay_m1, WR_PAY_M1),
+ HNS3_PMU_DLY_EVT_PAIR(dly_msix_write, MSIX_WRITE),
+
+ /* interrupt rate events */
+ HNS3_PMU_INTR_EVT_PAIR(pps_intr_msix_nic, MSIX_NIC),
+
+ NULL
+};
+
+static struct attribute *hns3_pmu_filter_mode_attr[] = {
+ /* bandwidth events */
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_ssu_egu, SSU_EGU),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_ssu_rpu, SSU_RPU),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_ssu_roce, SSU_ROCE),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_roce_ssu, ROCE_SSU),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_tpu_ssu, TPU_SSU),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rpu_rcbrx, RPU_RCBRX),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rcbtx_txsch, RCBTX_TXSCH),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_wr_fbd, WR_FBD),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_wr_ebd, WR_EBD),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rd_fbd, RD_FBD),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rd_ebd, RD_EBD),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_BW_FLT_MODE_PAIR(bw_wr_pay_m1, WR_PAY_M1),
+
+ /* packet rate events */
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_igu_ssu, IGU_SSU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_ssu_egu, SSU_EGU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_ssu_rpu, SSU_RPU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_ssu_roce, SSU_ROCE),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_roce_ssu, ROCE_SSU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_tpu_ssu, TPU_SSU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rpu_rcbrx, RPU_RCBRX),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rcbtx_tpu, RCBTX_TPU),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rcbtx_txsch, RCBTX_TXSCH),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_wr_fbd, WR_FBD),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_wr_ebd, WR_EBD),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rd_fbd, RD_FBD),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rd_ebd, RD_EBD),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_wr_pay_m1, WR_PAY_M1),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_intr_nicroh_tx_pre, NICROH_TX_PRE),
+ HNS3_PMU_PPS_FLT_MODE_PAIR(pps_intr_nicroh_rx_pre, NICROH_RX_PRE),
+
+ /* latency events */
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_tx_push_to_mac, TX_PUSH),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_tx_normal_to_mac, TX),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_ssu_tx_th_nic, SSU_TX_NIC),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_ssu_tx_th_roce, SSU_TX_ROCE),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_ssu_rx_th_nic, SSU_RX_NIC),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_ssu_rx_th_roce, SSU_RX_ROCE),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rpu, RPU),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_tpu, TPU),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rpe, RPE),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_tpe_normal, TPE),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_tpe_push, TPE_PUSH),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_wr_fbd, WR_FBD),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_wr_ebd, WR_EBD),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rd_fbd, RD_FBD),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rd_ebd, RD_EBD),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rd_pay_m0, RD_PAY_M0),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_rd_pay_m1, RD_PAY_M1),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_wr_pay_m0, WR_PAY_M0),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_wr_pay_m1, WR_PAY_M1),
+ HNS3_PMU_DLY_FLT_MODE_PAIR(dly_msix_write, MSIX_WRITE),
+
+ /* interrupt rate events */
+ HNS3_PMU_INTR_FLT_MODE_PAIR(pps_intr_msix_nic, MSIX_NIC),
+
+ NULL
+};
+
+static struct attribute_group hns3_pmu_events_group = {
+ .name = "events",
+ .attrs = hns3_pmu_events_attr,
+};
+
+static struct attribute_group hns3_pmu_filter_mode_group = {
+ .name = "filtermode",
+ .attrs = hns3_pmu_filter_mode_attr,
+};
+
+static struct attribute *hns3_pmu_format_attr[] = {
+ HNS3_PMU_FORMAT_ATTR(subevent, "config:0-7"),
+ HNS3_PMU_FORMAT_ATTR(event_type, "config:8-15"),
+ HNS3_PMU_FORMAT_ATTR(ext_counter_used, "config:16"),
+ HNS3_PMU_FORMAT_ATTR(port, "config1:0-3"),
+ HNS3_PMU_FORMAT_ATTR(tc, "config1:4-7"),
+ HNS3_PMU_FORMAT_ATTR(bdf, "config1:8-23"),
+ HNS3_PMU_FORMAT_ATTR(queue, "config1:24-39"),
+ HNS3_PMU_FORMAT_ATTR(intr, "config1:40-51"),
+ HNS3_PMU_FORMAT_ATTR(global, "config1:52"),
+ NULL
+};
+
+static struct attribute_group hns3_pmu_format_group = {
+ .name = "format",
+ .attrs = hns3_pmu_format_attr,
+};
+
+static struct attribute *hns3_pmu_cpumask_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL
+};
+
+static struct attribute_group hns3_pmu_cpumask_attr_group = {
+ .attrs = hns3_pmu_cpumask_attrs,
+};
+
+static struct attribute *hns3_pmu_identifier_attrs[] = {
+ &dev_attr_identifier.attr,
+ NULL
+};
+
+static struct attribute_group hns3_pmu_identifier_attr_group = {
+ .attrs = hns3_pmu_identifier_attrs,
+};
+
+static struct attribute *hns3_pmu_bdf_range_attrs[] = {
+ &dev_attr_bdf_min.attr,
+ &dev_attr_bdf_max.attr,
+ NULL
+};
+
+static struct attribute_group hns3_pmu_bdf_range_attr_group = {
+ .attrs = hns3_pmu_bdf_range_attrs,
+};
+
+static struct attribute *hns3_pmu_hw_clk_freq_attrs[] = {
+ &dev_attr_hw_clk_freq.attr,
+ NULL
+};
+
+static struct attribute_group hns3_pmu_hw_clk_freq_attr_group = {
+ .attrs = hns3_pmu_hw_clk_freq_attrs,
+};
+
+static const struct attribute_group *hns3_pmu_attr_groups[] = {
+ &hns3_pmu_events_group,
+ &hns3_pmu_filter_mode_group,
+ &hns3_pmu_format_group,
+ &hns3_pmu_cpumask_attr_group,
+ &hns3_pmu_identifier_attr_group,
+ &hns3_pmu_bdf_range_attr_group,
+ &hns3_pmu_hw_clk_freq_attr_group,
+ NULL
+};
+
+static u32 hns3_pmu_get_event(struct perf_event *event)
+{
+ return hns3_pmu_get_ext_counter_used(event) << 16 |
+ hns3_pmu_get_event_type(event) << 8 |
+ hns3_pmu_get_subevent(event);
+}
+
+static u32 hns3_pmu_get_real_event(struct perf_event *event)
+{
+ return hns3_pmu_get_event_type(event) << 8 |
+ hns3_pmu_get_subevent(event);
+}
+
+static u32 hns3_pmu_get_offset(u32 offset, u32 idx)
+{
+ return offset + HNS3_PMU_REG_EVENT_OFFSET +
+ HNS3_PMU_REG_EVENT_SIZE * idx;
+}
+
+static u32 hns3_pmu_readl(struct hns3_pmu *hns3_pmu, u32 reg_offset, u32 idx)
+{
+ u32 offset = hns3_pmu_get_offset(reg_offset, idx);
+
+ return readl(hns3_pmu->base + offset);
+}
+
+static void hns3_pmu_writel(struct hns3_pmu *hns3_pmu, u32 reg_offset, u32 idx,
+ u32 val)
+{
+ u32 offset = hns3_pmu_get_offset(reg_offset, idx);
+
+ writel(val, hns3_pmu->base + offset);
+}
+
+static u64 hns3_pmu_readq(struct hns3_pmu *hns3_pmu, u32 reg_offset, u32 idx)
+{
+ u32 offset = hns3_pmu_get_offset(reg_offset, idx);
+
+ return readq(hns3_pmu->base + offset);
+}
+
+static void hns3_pmu_writeq(struct hns3_pmu *hns3_pmu, u32 reg_offset, u32 idx,
+ u64 val)
+{
+ u32 offset = hns3_pmu_get_offset(reg_offset, idx);
+
+ writeq(val, hns3_pmu->base + offset);
+}
+
+static bool hns3_pmu_cmp_event(struct perf_event *target,
+ struct perf_event *event)
+{
+ return hns3_pmu_get_real_event(target) == hns3_pmu_get_real_event(event);
+}
+
+static int hns3_pmu_find_related_event_idx(struct hns3_pmu *hns3_pmu,
+ struct perf_event *event)
+{
+ struct perf_event *sibling;
+ int hw_event_used = 0;
+ int idx;
+
+ for (idx = 0; idx < HNS3_PMU_MAX_HW_EVENTS; idx++) {
+ sibling = hns3_pmu->hw_events[idx];
+ if (!sibling)
+ continue;
+
+ hw_event_used++;
+
+ if (!hns3_pmu_cmp_event(sibling, event))
+ continue;
+
+ /* Related events is used in group */
+ if (sibling->group_leader == event->group_leader)
+ return idx;
+ }
+
+ /* No related event and all hardware events are used up */
+ if (hw_event_used >= HNS3_PMU_MAX_HW_EVENTS)
+ return -EBUSY;
+
+ /* No related event and there is extra hardware events can be use */
+ return -ENOENT;
+}
+
+static int hns3_pmu_get_event_idx(struct hns3_pmu *hns3_pmu)
+{
+ int idx;
+
+ for (idx = 0; idx < HNS3_PMU_MAX_HW_EVENTS; idx++) {
+ if (!hns3_pmu->hw_events[idx])
+ return idx;
+ }
+
+ return -EBUSY;
+}
+
+static bool hns3_pmu_valid_bdf(struct hns3_pmu *hns3_pmu, u16 bdf)
+{
+ struct pci_dev *pdev;
+
+ if (bdf < hns3_pmu->bdf_min || bdf > hns3_pmu->bdf_max) {
+ pci_err(hns3_pmu->pdev, "Invalid EP device: %#x!\n", bdf);
+ return false;
+ }
+
+ pdev = pci_get_domain_bus_and_slot(pci_domain_nr(hns3_pmu->pdev->bus),
+ PCI_BUS_NUM(bdf),
+ GET_PCI_DEVFN(bdf));
+ if (!pdev) {
+ pci_err(hns3_pmu->pdev, "Nonexistent EP device: %#x!\n", bdf);
+ return false;
+ }
+
+ pci_dev_put(pdev);
+ return true;
+}
+
+static void hns3_pmu_set_qid_para(struct hns3_pmu *hns3_pmu, u32 idx, u16 bdf,
+ u16 queue)
+{
+ u32 val;
+
+ val = GET_PCI_DEVFN(bdf);
+ val |= (u32)queue << HNS3_PMU_QID_PARA_QUEUE_S;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_QID_PARA, idx, val);
+}
+
+static bool hns3_pmu_qid_req_start(struct hns3_pmu *hns3_pmu, u32 idx)
+{
+ bool queue_id_valid = false;
+ u32 reg_qid_ctrl, val;
+ int err;
+
+ /* enable queue id request */
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_QID_CTRL, idx,
+ HNS3_PMU_QID_CTRL_REQ_ENABLE);
+
+ reg_qid_ctrl = hns3_pmu_get_offset(HNS3_PMU_REG_EVENT_QID_CTRL, idx);
+ err = readl_poll_timeout(hns3_pmu->base + reg_qid_ctrl, val,
+ val & HNS3_PMU_QID_CTRL_DONE, 1, 1000);
+ if (err == -ETIMEDOUT) {
+ pci_err(hns3_pmu->pdev, "QID request timeout!\n");
+ goto out;
+ }
+
+ queue_id_valid = !(val & HNS3_PMU_QID_CTRL_MISS);
+
+out:
+ /* disable qid request and clear status */
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_QID_CTRL, idx, 0);
+
+ return queue_id_valid;
+}
+
+static bool hns3_pmu_valid_queue(struct hns3_pmu *hns3_pmu, u32 idx, u16 bdf,
+ u16 queue)
+{
+ hns3_pmu_set_qid_para(hns3_pmu, idx, bdf, queue);
+
+ return hns3_pmu_qid_req_start(hns3_pmu, idx);
+}
+
+static struct hns3_pmu_event_attr *hns3_pmu_get_pmu_event(u32 event)
+{
+ struct hns3_pmu_event_attr *pmu_event;
+ struct dev_ext_attribute *eattr;
+ struct device_attribute *dattr;
+ struct attribute *attr;
+ u32 i;
+
+ for (i = 0; i < ARRAY_SIZE(hns3_pmu_events_attr) - 1; i++) {
+ attr = hns3_pmu_events_attr[i];
+ dattr = container_of(attr, struct device_attribute, attr);
+ eattr = container_of(dattr, struct dev_ext_attribute, attr);
+ pmu_event = eattr->var;
+
+ if (event == pmu_event->event)
+ return pmu_event;
+ }
+
+ return NULL;
+}
+
+static int hns3_pmu_set_func_mode(struct perf_event *event,
+ struct hns3_pmu *hns3_pmu)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u16 bdf = hns3_pmu_get_bdf(event);
+
+ if (!hns3_pmu_valid_bdf(hns3_pmu, bdf))
+ return -ENOENT;
+
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_FUNC);
+
+ return 0;
+}
+
+static int hns3_pmu_set_func_queue_mode(struct perf_event *event,
+ struct hns3_pmu *hns3_pmu)
+{
+ u16 queue_id = hns3_pmu_get_queue(event);
+ struct hw_perf_event *hwc = &event->hw;
+ u16 bdf = hns3_pmu_get_bdf(event);
+
+ if (!hns3_pmu_valid_bdf(hns3_pmu, bdf))
+ return -ENOENT;
+
+ if (!hns3_pmu_valid_queue(hns3_pmu, hwc->idx, bdf, queue_id)) {
+ pci_err(hns3_pmu->pdev, "Invalid queue: %u\n", queue_id);
+ return -ENOENT;
+ }
+
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_FUNC_QUEUE);
+
+ return 0;
+}
+
+static bool
+hns3_pmu_is_enabled_global_mode(struct perf_event *event,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u8 global = hns3_pmu_get_global(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_GLOBAL))
+ return false;
+
+ return global;
+}
+
+static bool hns3_pmu_is_enabled_func_mode(struct perf_event *event,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u16 queue_id = hns3_pmu_get_queue(event);
+ u16 bdf = hns3_pmu_get_bdf(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC))
+ return false;
+ else if (queue_id != HNS3_PMU_FILTER_ALL_QUEUE)
+ return false;
+
+ return bdf;
+}
+
+static bool
+hns3_pmu_is_enabled_func_queue_mode(struct perf_event *event,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u16 queue_id = hns3_pmu_get_queue(event);
+ u16 bdf = hns3_pmu_get_bdf(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC_QUEUE))
+ return false;
+ else if (queue_id == HNS3_PMU_FILTER_ALL_QUEUE)
+ return false;
+
+ return bdf;
+}
+
+static bool hns3_pmu_is_enabled_port_mode(struct perf_event *event,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u8 tc_id = hns3_pmu_get_tc(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_PORT))
+ return false;
+
+ return tc_id == HNS3_PMU_FILTER_ALL_TC;
+}
+
+static bool
+hns3_pmu_is_enabled_port_tc_mode(struct perf_event *event,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u8 tc_id = hns3_pmu_get_tc(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_PORT_TC))
+ return false;
+
+ return tc_id != HNS3_PMU_FILTER_ALL_TC;
+}
+
+static bool
+hns3_pmu_is_enabled_func_intr_mode(struct perf_event *event,
+ struct hns3_pmu *hns3_pmu,
+ struct hns3_pmu_event_attr *pmu_event)
+{
+ u16 bdf = hns3_pmu_get_bdf(event);
+
+ if (!(pmu_event->filter_support & HNS3_PMU_FILTER_SUPPORT_FUNC_INTR))
+ return false;
+
+ return hns3_pmu_valid_bdf(hns3_pmu, bdf);
+}
+
+static int hns3_pmu_select_filter_mode(struct perf_event *event,
+ struct hns3_pmu *hns3_pmu)
+{
+ u32 event_id = hns3_pmu_get_event(event);
+ struct hw_perf_event *hwc = &event->hw;
+ struct hns3_pmu_event_attr *pmu_event;
+
+ pmu_event = hns3_pmu_get_pmu_event(event_id);
+ if (!pmu_event) {
+ pci_err(hns3_pmu->pdev, "Invalid pmu event\n");
+ return -ENOENT;
+ }
+
+ if (hns3_pmu_is_enabled_global_mode(event, pmu_event)) {
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_GLOBAL);
+ return 0;
+ }
+
+ if (hns3_pmu_is_enabled_func_mode(event, pmu_event))
+ return hns3_pmu_set_func_mode(event, hns3_pmu);
+
+ if (hns3_pmu_is_enabled_func_queue_mode(event, pmu_event))
+ return hns3_pmu_set_func_queue_mode(event, hns3_pmu);
+
+ if (hns3_pmu_is_enabled_port_mode(event, pmu_event)) {
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_PORT);
+ return 0;
+ }
+
+ if (hns3_pmu_is_enabled_port_tc_mode(event, pmu_event)) {
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_PORT_TC);
+ return 0;
+ }
+
+ if (hns3_pmu_is_enabled_func_intr_mode(event, hns3_pmu, pmu_event)) {
+ HNS3_PMU_SET_HW_FILTER(hwc, HNS3_PMU_HW_FILTER_FUNC_INTR);
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+static bool hns3_pmu_validate_event_group(struct perf_event *event)
+{
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct perf_event *event_group[HNS3_PMU_MAX_HW_EVENTS];
+ int counters = 1;
+ int num;
+
+ event_group[0] = leader;
+ if (!is_software_event(leader)) {
+ if (leader->pmu != event->pmu)
+ return false;
+
+ if (leader != event && !hns3_pmu_cmp_event(leader, event))
+ event_group[counters++] = event;
+ }
+
+ for_each_sibling_event(sibling, event->group_leader) {
+ if (is_software_event(sibling))
+ continue;
+
+ if (sibling->pmu != event->pmu)
+ return false;
+
+ for (num = 0; num < counters; num++) {
+ if (hns3_pmu_cmp_event(event_group[num], sibling))
+ break;
+ }
+
+ if (num == counters)
+ event_group[counters++] = sibling;
+ }
+
+ return counters <= HNS3_PMU_MAX_HW_EVENTS;
+}
+
+static u32 hns3_pmu_get_filter_condition(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u16 intr_id = hns3_pmu_get_intr(event);
+ u8 port_id = hns3_pmu_get_port(event);
+ u16 bdf = hns3_pmu_get_bdf(event);
+ u8 tc_id = hns3_pmu_get_tc(event);
+ u8 filter_mode;
+
+ filter_mode = *(u8 *)hwc->addr_filters;
+ switch (filter_mode) {
+ case HNS3_PMU_HW_FILTER_PORT:
+ return FILTER_CONDITION_PORT(port_id);
+ case HNS3_PMU_HW_FILTER_PORT_TC:
+ return FILTER_CONDITION_PORT_TC(port_id, tc_id);
+ case HNS3_PMU_HW_FILTER_FUNC:
+ case HNS3_PMU_HW_FILTER_FUNC_QUEUE:
+ return GET_PCI_DEVFN(bdf);
+ case HNS3_PMU_HW_FILTER_FUNC_INTR:
+ return FILTER_CONDITION_FUNC_INTR(GET_PCI_DEVFN(bdf), intr_id);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static void hns3_pmu_config_filter(struct perf_event *event)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ u8 event_type = hns3_pmu_get_event_type(event);
+ u8 subevent_id = hns3_pmu_get_subevent(event);
+ u16 queue_id = hns3_pmu_get_queue(event);
+ struct hw_perf_event *hwc = &event->hw;
+ u8 filter_mode = *(u8 *)hwc->addr_filters;
+ u16 bdf = hns3_pmu_get_bdf(event);
+ u32 idx = hwc->idx;
+ u32 val;
+
+ val = event_type;
+ val |= subevent_id << HNS3_PMU_CTRL_SUBEVENT_S;
+ val |= filter_mode << HNS3_PMU_CTRL_FILTER_MODE_S;
+ val |= HNS3_PMU_EVENT_OVERFLOW_RESTART;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx, val);
+
+ val = hns3_pmu_get_filter_condition(event);
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_HIGH, idx, val);
+
+ if (filter_mode == HNS3_PMU_HW_FILTER_FUNC_QUEUE)
+ hns3_pmu_set_qid_para(hns3_pmu, idx, bdf, queue_id);
+}
+
+static void hns3_pmu_enable_counter(struct hns3_pmu *hns3_pmu,
+ struct hw_perf_event *hwc)
+{
+ u32 idx = hwc->idx;
+ u32 val;
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx);
+ val |= HNS3_PMU_EVENT_EN;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx, val);
+}
+
+static void hns3_pmu_disable_counter(struct hns3_pmu *hns3_pmu,
+ struct hw_perf_event *hwc)
+{
+ u32 idx = hwc->idx;
+ u32 val;
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx);
+ val &= ~HNS3_PMU_EVENT_EN;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx, val);
+}
+
+static void hns3_pmu_enable_intr(struct hns3_pmu *hns3_pmu,
+ struct hw_perf_event *hwc)
+{
+ u32 idx = hwc->idx;
+ u32 val;
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_INTR_MASK, idx);
+ val &= ~HNS3_PMU_INTR_MASK_OVERFLOW;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_INTR_MASK, idx, val);
+}
+
+static void hns3_pmu_disable_intr(struct hns3_pmu *hns3_pmu,
+ struct hw_perf_event *hwc)
+{
+ u32 idx = hwc->idx;
+ u32 val;
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_INTR_MASK, idx);
+ val |= HNS3_PMU_INTR_MASK_OVERFLOW;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_INTR_MASK, idx, val);
+}
+
+static void hns3_pmu_clear_intr_status(struct hns3_pmu *hns3_pmu, u32 idx)
+{
+ u32 val;
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx);
+ val |= HNS3_PMU_EVENT_STATUS_RESET;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx, val);
+
+ val = hns3_pmu_readl(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx);
+ val &= ~HNS3_PMU_EVENT_STATUS_RESET;
+ hns3_pmu_writel(hns3_pmu, HNS3_PMU_REG_EVENT_CTRL_LOW, idx, val);
+}
+
+static u64 hns3_pmu_read_counter(struct perf_event *event)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+
+ return hns3_pmu_readq(hns3_pmu, event->hw.event_base, event->hw.idx);
+}
+
+static void hns3_pmu_write_counter(struct perf_event *event, u64 value)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ u32 idx = event->hw.idx;
+
+ hns3_pmu_writeq(hns3_pmu, HNS3_PMU_REG_EVENT_COUNTER, idx, value);
+ hns3_pmu_writeq(hns3_pmu, HNS3_PMU_REG_EVENT_EXT_COUNTER, idx, value);
+}
+
+static void hns3_pmu_init_counter(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ local64_set(&hwc->prev_count, 0);
+ hns3_pmu_write_counter(event, 0);
+}
+
+static int hns3_pmu_event_init(struct perf_event *event)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int ret;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ /* Sampling is not supported */
+ if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+ return -EOPNOTSUPP;
+
+ event->cpu = hns3_pmu->on_cpu;
+
+ idx = hns3_pmu_get_event_idx(hns3_pmu);
+ if (idx < 0) {
+ pci_err(hns3_pmu->pdev, "Up to %u events are supported!\n",
+ HNS3_PMU_MAX_HW_EVENTS);
+ return -EBUSY;
+ }
+
+ hwc->idx = idx;
+
+ ret = hns3_pmu_select_filter_mode(event, hns3_pmu);
+ if (ret) {
+ pci_err(hns3_pmu->pdev, "Invalid filter, ret = %d.\n", ret);
+ return ret;
+ }
+
+ if (!hns3_pmu_validate_event_group(event)) {
+ pci_err(hns3_pmu->pdev, "Invalid event group.\n");
+ return -EINVAL;
+ }
+
+ if (hns3_pmu_get_ext_counter_used(event))
+ hwc->event_base = HNS3_PMU_REG_EVENT_EXT_COUNTER;
+ else
+ hwc->event_base = HNS3_PMU_REG_EVENT_COUNTER;
+
+ return 0;
+}
+
+static void hns3_pmu_read(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u64 new_cnt, prev_cnt, delta;
+
+ do {
+ prev_cnt = local64_read(&hwc->prev_count);
+ new_cnt = hns3_pmu_read_counter(event);
+ } while (local64_cmpxchg(&hwc->prev_count, prev_cnt, new_cnt) !=
+ prev_cnt);
+
+ delta = new_cnt - prev_cnt;
+ local64_add(delta, &event->count);
+}
+
+static void hns3_pmu_start(struct perf_event *event, int flags)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
+ return;
+
+ WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+ hwc->state = 0;
+
+ hns3_pmu_config_filter(event);
+ hns3_pmu_init_counter(event);
+ hns3_pmu_enable_intr(hns3_pmu, hwc);
+ hns3_pmu_enable_counter(hns3_pmu, hwc);
+
+ perf_event_update_userpage(event);
+}
+
+static void hns3_pmu_stop(struct perf_event *event, int flags)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ hns3_pmu_disable_counter(hns3_pmu, hwc);
+ hns3_pmu_disable_intr(hns3_pmu, hwc);
+
+ WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+ hwc->state |= PERF_HES_STOPPED;
+
+ if (hwc->state & PERF_HES_UPTODATE)
+ return;
+
+ /* Read hardware counter and update the perf counter statistics */
+ hns3_pmu_read(event);
+ hwc->state |= PERF_HES_UPTODATE;
+}
+
+static int hns3_pmu_add(struct perf_event *event, int flags)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+ /* Check all working events to find a related event. */
+ idx = hns3_pmu_find_related_event_idx(hns3_pmu, event);
+ if (idx < 0 && idx != -ENOENT)
+ return idx;
+
+ /* Current event shares an enabled hardware event with related event */
+ if (idx >= 0 && idx < HNS3_PMU_MAX_HW_EVENTS) {
+ hwc->idx = idx;
+ goto start_count;
+ }
+
+ idx = hns3_pmu_get_event_idx(hns3_pmu);
+ if (idx < 0)
+ return idx;
+
+ hwc->idx = idx;
+ hns3_pmu->hw_events[idx] = event;
+
+start_count:
+ if (flags & PERF_EF_START)
+ hns3_pmu_start(event, PERF_EF_RELOAD);
+
+ return 0;
+}
+
+static void hns3_pmu_del(struct perf_event *event, int flags)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ hns3_pmu_stop(event, PERF_EF_UPDATE);
+ hns3_pmu->hw_events[hwc->idx] = NULL;
+ perf_event_update_userpage(event);
+}
+
+static void hns3_pmu_enable(struct pmu *pmu)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(pmu);
+ u32 val;
+
+ val = readl(hns3_pmu->base + HNS3_PMU_REG_GLOBAL_CTRL);
+ val |= HNS3_PMU_GLOBAL_START;
+ writel(val, hns3_pmu->base + HNS3_PMU_REG_GLOBAL_CTRL);
+}
+
+static void hns3_pmu_disable(struct pmu *pmu)
+{
+ struct hns3_pmu *hns3_pmu = to_hns3_pmu(pmu);
+ u32 val;
+
+ val = readl(hns3_pmu->base + HNS3_PMU_REG_GLOBAL_CTRL);
+ val &= ~HNS3_PMU_GLOBAL_START;
+ writel(val, hns3_pmu->base + HNS3_PMU_REG_GLOBAL_CTRL);
+}
+
+static int hns3_pmu_alloc_pmu(struct pci_dev *pdev, struct hns3_pmu *hns3_pmu)
+{
+ u16 device_id;
+ char *name;
+ u32 val;
+
+ hns3_pmu->base = pcim_iomap_table(pdev)[BAR_2];
+ if (!hns3_pmu->base) {
+ pci_err(pdev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+
+ hns3_pmu->hw_clk_freq = readl(hns3_pmu->base + HNS3_PMU_REG_CLOCK_FREQ);
+
+ val = readl(hns3_pmu->base + HNS3_PMU_REG_BDF);
+ hns3_pmu->bdf_min = val & 0xffff;
+ hns3_pmu->bdf_max = val >> 16;
+
+ val = readl(hns3_pmu->base + HNS3_PMU_REG_DEVICE_ID);
+ device_id = val & 0xffff;
+ name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hns3_pmu_sicl_%u", device_id);
+ if (!name)
+ return -ENOMEM;
+
+ hns3_pmu->pdev = pdev;
+ hns3_pmu->on_cpu = -1;
+ hns3_pmu->identifier = readl(hns3_pmu->base + HNS3_PMU_REG_VERSION);
+ hns3_pmu->pmu = (struct pmu) {
+ .name = name,
+ .module = THIS_MODULE,
+ .event_init = hns3_pmu_event_init,
+ .pmu_enable = hns3_pmu_enable,
+ .pmu_disable = hns3_pmu_disable,
+ .add = hns3_pmu_add,
+ .del = hns3_pmu_del,
+ .start = hns3_pmu_start,
+ .stop = hns3_pmu_stop,
+ .read = hns3_pmu_read,
+ .task_ctx_nr = perf_invalid_context,
+ .attr_groups = hns3_pmu_attr_groups,
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ };
+
+ return 0;
+}
+
+static irqreturn_t hns3_pmu_irq(int irq, void *data)
+{
+ struct hns3_pmu *hns3_pmu = data;
+ u32 intr_status, idx;
+
+ for (idx = 0; idx < HNS3_PMU_MAX_HW_EVENTS; idx++) {
+ intr_status = hns3_pmu_readl(hns3_pmu,
+ HNS3_PMU_REG_EVENT_INTR_STATUS,
+ idx);
+
+ /*
+ * As each counter will restart from 0 when it is overflowed,
+ * extra processing is no need, just clear interrupt status.
+ */
+ if (intr_status)
+ hns3_pmu_clear_intr_status(hns3_pmu, idx);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int hns3_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct hns3_pmu *hns3_pmu;
+
+ hns3_pmu = hlist_entry_safe(node, struct hns3_pmu, node);
+ if (!hns3_pmu)
+ return -ENODEV;
+
+ if (hns3_pmu->on_cpu == -1) {
+ hns3_pmu->on_cpu = cpu;
+ irq_set_affinity(hns3_pmu->irq, cpumask_of(cpu));
+ }
+
+ return 0;
+}
+
+static int hns3_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct hns3_pmu *hns3_pmu;
+ unsigned int target;
+
+ hns3_pmu = hlist_entry_safe(node, struct hns3_pmu, node);
+ if (!hns3_pmu)
+ return -ENODEV;
+
+ /* Nothing to do if this CPU doesn't own the PMU */
+ if (hns3_pmu->on_cpu != cpu)
+ return 0;
+
+ /* Choose a new CPU from all online cpus */
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target >= nr_cpu_ids)
+ return 0;
+
+ perf_pmu_migrate_context(&hns3_pmu->pmu, cpu, target);
+ hns3_pmu->on_cpu = target;
+ irq_set_affinity(hns3_pmu->irq, cpumask_of(target));
+
+ return 0;
+}
+
+static void hns3_pmu_free_irq(void *data)
+{
+ struct pci_dev *pdev = data;
+
+ pci_free_irq_vectors(pdev);
+}
+
+static int hns3_pmu_irq_register(struct pci_dev *pdev,
+ struct hns3_pmu *hns3_pmu)
+{
+ int irq, ret;
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+ if (ret < 0) {
+ pci_err(pdev, "failed to enable MSI vectors, ret = %d.\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action(&pdev->dev, hns3_pmu_free_irq, pdev);
+ if (ret) {
+ pci_err(pdev, "failed to add free irq action, ret = %d.\n", ret);
+ return ret;
+ }
+
+ irq = pci_irq_vector(pdev, 0);
+ ret = devm_request_irq(&pdev->dev, irq, hns3_pmu_irq, 0,
+ hns3_pmu->pmu.name, hns3_pmu);
+ if (ret) {
+ pci_err(pdev, "failed to register irq, ret = %d.\n", ret);
+ return ret;
+ }
+
+ hns3_pmu->irq = irq;
+
+ return 0;
+}
+
+static int hns3_pmu_init_pmu(struct pci_dev *pdev, struct hns3_pmu *hns3_pmu)
+{
+ int ret;
+
+ ret = hns3_pmu_alloc_pmu(pdev, hns3_pmu);
+ if (ret)
+ return ret;
+
+ ret = hns3_pmu_irq_register(pdev, hns3_pmu);
+ if (ret)
+ return ret;
+
+ ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE,
+ &hns3_pmu->node);
+ if (ret) {
+ pci_err(pdev, "failed to register hotplug, ret = %d.\n", ret);
+ return ret;
+ }
+
+ ret = perf_pmu_register(&hns3_pmu->pmu, hns3_pmu->pmu.name, -1);
+ if (ret) {
+ pci_err(pdev, "failed to register perf PMU, ret = %d.\n", ret);
+ cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE,
+ &hns3_pmu->node);
+ }
+
+ return ret;
+}
+
+static void hns3_pmu_uninit_pmu(struct pci_dev *pdev)
+{
+ struct hns3_pmu *hns3_pmu = pci_get_drvdata(pdev);
+
+ perf_pmu_unregister(&hns3_pmu->pmu);
+ cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE,
+ &hns3_pmu->node);
+}
+
+static int hns3_pmu_init_dev(struct pci_dev *pdev)
+{
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ pci_err(pdev, "failed to enable pci device, ret = %d.\n", ret);
+ return ret;
+ }
+
+ ret = pcim_iomap_regions(pdev, BIT(BAR_2), "hns3_pmu");
+ if (ret < 0) {
+ pci_err(pdev, "failed to request pci region, ret = %d.\n", ret);
+ return ret;
+ }
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+static int hns3_pmu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct hns3_pmu *hns3_pmu;
+ int ret;
+
+ hns3_pmu = devm_kzalloc(&pdev->dev, sizeof(*hns3_pmu), GFP_KERNEL);
+ if (!hns3_pmu)
+ return -ENOMEM;
+
+ ret = hns3_pmu_init_dev(pdev);
+ if (ret)
+ return ret;
+
+ ret = hns3_pmu_init_pmu(pdev, hns3_pmu);
+ if (ret) {
+ pci_clear_master(pdev);
+ return ret;
+ }
+
+ pci_set_drvdata(pdev, hns3_pmu);
+
+ return ret;
+}
+
+static void hns3_pmu_remove(struct pci_dev *pdev)
+{
+ hns3_pmu_uninit_pmu(pdev);
+ pci_clear_master(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id hns3_pmu_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa22b) },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, hns3_pmu_ids);
+
+static struct pci_driver hns3_pmu_driver = {
+ .name = "hns3_pmu",
+ .id_table = hns3_pmu_ids,
+ .probe = hns3_pmu_probe,
+ .remove = hns3_pmu_remove,
+};
+
+static int __init hns3_pmu_module_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE,
+ "AP_PERF_ARM_HNS3_PMU_ONLINE",
+ hns3_pmu_online_cpu,
+ hns3_pmu_offline_cpu);
+ if (ret) {
+ pr_err("failed to setup HNS3 PMU hotplug, ret = %d.\n", ret);
+ return ret;
+ }
+
+ ret = pci_register_driver(&hns3_pmu_driver);
+ if (ret) {
+ pr_err("failed to register pci driver, ret = %d.\n", ret);
+ cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE);
+ }
+
+ return ret;
+}
+module_init(hns3_pmu_module_init);
+
+static void __exit hns3_pmu_module_exit(void)
+{
+ pci_unregister_driver(&hns3_pmu_driver);
+ cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE);
+}
+module_exit(hns3_pmu_module_exit);
+
+MODULE_DESCRIPTION("HNS3 PMU driver");
+MODULE_LICENSE("GPL v2");
/* Marvell CN10K LLC-TAD perf driver
*
* Copyright (C) 2021 Marvell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#define pr_fmt(fmt) "tad_pmu: " fmt
#include <linux/perf_event.h>
#include <linux/platform_device.h>
-#define TAD_PFC_OFFSET 0x0
+#define TAD_PFC_OFFSET 0x800
#define TAD_PFC(counter) (TAD_PFC_OFFSET | (counter << 3))
-#define TAD_PRF_OFFSET 0x100
+#define TAD_PRF_OFFSET 0x900
#define TAD_PRF(counter) (TAD_PRF_OFFSET | (counter << 3))
#define TAD_PRF_CNTSEL_MASK 0xFF
#define TAD_MAX_COUNTERS 8
* which sets TAD()_PRF()[CNTSEL] != 0
*/
for (i = 0; i < tad_pmu->region_cnt; i++) {
- reg_val = readq_relaxed(tad_pmu->regions[i].base +
- TAD_PRF(counter_idx));
- reg_val |= (event_idx & 0xFF);
+ reg_val = event_idx & 0xFF;
writeq_relaxed(reg_val, tad_pmu->regions[i].base +
TAD_PRF(counter_idx));
}
return delta;
}
-static void riscv_pmu_stop(struct perf_event *event, int flags)
+void riscv_pmu_stop(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
return overflow;
}
-static void riscv_pmu_start(struct perf_event *event, int flags)
+void riscv_pmu_start(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of.h>
+#include <linux/cpu_pm.h>
#include <asm/sbi.h>
#include <asm/hwcap.h>
+PMU_FORMAT_ATTR(event, "config:0-47");
+PMU_FORMAT_ATTR(firmware, "config:63");
+
+static struct attribute *riscv_arch_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_firmware.attr,
+ NULL,
+};
+
+static struct attribute_group riscv_pmu_format_group = {
+ .name = "format",
+ .attrs = riscv_arch_formats_attr,
+};
+
+static const struct attribute_group *riscv_pmu_attr_groups[] = {
+ &riscv_pmu_format_group,
+ NULL,
+};
+
union sbi_pmu_ctr_info {
unsigned long value;
struct {
child = of_get_compatible_child(cpu, "riscv,cpu-intc");
if (!child) {
pr_err("Failed to find INTC node\n");
+ of_node_put(cpu);
return -ENODEV;
}
domain = irq_find_host(child);
of_node_put(child);
- if (domain)
+ if (domain) {
+ of_node_put(cpu);
break;
+ }
}
if (!domain) {
pr_err("Failed to find INTC IRQ root domain\n");
return 0;
}
+#ifdef CONFIG_CPU_PM
+static int riscv_pm_pmu_notify(struct notifier_block *b, unsigned long cmd,
+ void *v)
+{
+ struct riscv_pmu *rvpmu = container_of(b, struct riscv_pmu, riscv_pm_nb);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+ int enabled = bitmap_weight(cpuc->used_hw_ctrs, RISCV_MAX_COUNTERS);
+ struct perf_event *event;
+ int idx;
+
+ if (!enabled)
+ return NOTIFY_OK;
+
+ for (idx = 0; idx < RISCV_MAX_COUNTERS; idx++) {
+ event = cpuc->events[idx];
+ if (!event)
+ continue;
+
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ /*
+ * Stop and update the counter
+ */
+ riscv_pmu_stop(event, PERF_EF_UPDATE);
+ break;
+ case CPU_PM_EXIT:
+ case CPU_PM_ENTER_FAILED:
+ /*
+ * Restore and enable the counter.
+ *
+ * Requires RCU read locking to be functional,
+ * wrap the call within RCU_NONIDLE to make the
+ * RCU subsystem aware this cpu is not idle from
+ * an RCU perspective for the riscv_pmu_start() call
+ * duration.
+ */
+ RCU_NONIDLE(riscv_pmu_start(event, PERF_EF_RELOAD));
+ break;
+ default:
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int riscv_pm_pmu_register(struct riscv_pmu *pmu)
+{
+ pmu->riscv_pm_nb.notifier_call = riscv_pm_pmu_notify;
+ return cpu_pm_register_notifier(&pmu->riscv_pm_nb);
+}
+
+static void riscv_pm_pmu_unregister(struct riscv_pmu *pmu)
+{
+ cpu_pm_unregister_notifier(&pmu->riscv_pm_nb);
+}
+#else
+static inline int riscv_pm_pmu_register(struct riscv_pmu *pmu) { return 0; }
+static inline void riscv_pm_pmu_unregister(struct riscv_pmu *pmu) { }
+#endif
+
+static void riscv_pmu_destroy(struct riscv_pmu *pmu)
+{
+ riscv_pm_pmu_unregister(pmu);
+ cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
+}
+
static int pmu_sbi_device_probe(struct platform_device *pdev)
{
struct riscv_pmu *pmu = NULL;
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
}
+ pmu->pmu.attr_groups = riscv_pmu_attr_groups;
pmu->num_counters = num_counters;
pmu->ctr_start = pmu_sbi_ctr_start;
pmu->ctr_stop = pmu_sbi_ctr_stop;
if (ret)
return ret;
+ ret = riscv_pm_pmu_register(pmu);
+ if (ret)
+ goto out_unregister;
+
ret = perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
- if (ret) {
- cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
- return ret;
- }
+ if (ret)
+ goto out_unregister;
return 0;
+out_unregister:
+ riscv_pmu_destroy(pmu);
+
out_free:
kfree(pmu);
return ret;
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
depends on OF
select GENERIC_PHY
default ARCH_BCM_IPROC
regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio),
BIT(gpio % 32), 0);
+ gpiochip_disable_irq(chip, gpio);
}
static void ocelot_irq_unmask(struct irq_data *data)
struct ocelot_pinctrl *info = gpiochip_get_data(chip);
unsigned int gpio = irqd_to_hwirq(data);
+ gpiochip_enable_irq(chip, gpio);
regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio),
BIT(gpio % 32), BIT(gpio % 32));
}
.irq_mask = ocelot_irq_mask,
.irq_eoi = ocelot_irq_ack,
.irq_unmask = ocelot_irq_unmask,
- .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
+ IRQCHIP_IMMUTABLE,
.irq_set_type = ocelot_irq_set_type,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS
};
static struct irq_chip ocelot_irqchip = {
.irq_ack = ocelot_irq_ack,
.irq_unmask = ocelot_irq_unmask,
.irq_set_type = ocelot_irq_set_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS
};
static int ocelot_irq_set_type(struct irq_data *data, unsigned int type)
irq = platform_get_irq_optional(pdev, 0);
if (irq > 0) {
girq = &gc->irq;
- girq->chip = &ocelot_irqchip;
+ gpio_irq_chip_set_chip(girq, &ocelot_irqchip);
girq->parent_handler = ocelot_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(&pdev->dev, 1,
return 0;
}
-static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
struct pmic_gpio_state *state = gpiochip_get_data(chip);
- struct irq_fwspec *fwspec;
-
- fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = chip->irq.parent_domain->fwnode;
/* param[2] must be left as 0 */
fwspec->param[3] = parent_type;
- return fwspec;
+ return 0;
}
static int pmic_gpio_probe(struct platform_device *pdev)
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
#define PIN(n) (0x0800 + 0x10 + (n))
#define IOLH(n) (0x1000 + (n) * 8)
#define IEN(n) (0x1800 + (n) * 8)
+#define ISEL(n) (0x2c80 + (n) * 8)
#define PWPR (0x3014)
#define SD_CH(n) (0x3000 + (n) * 4)
#define QSPI (0x3008)
#define RZG2L_PIN_ID_TO_PORT_OFFSET(id) (RZG2L_PIN_ID_TO_PORT(id) + 0x10)
#define RZG2L_PIN_ID_TO_PIN(id) ((id) % RZG2L_PINS_PER_PORT)
+#define RZG2L_TINT_MAX_INTERRUPT 32
+#define RZG2L_TINT_IRQ_START_INDEX 9
+#define RZG2L_PACK_HWIRQ(t, i) (((t) << 16) | (i))
+
struct rzg2l_dedicated_configs {
const char *name;
u32 config;
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range gpio_range;
+ DECLARE_BITMAP(tint_slot, RZG2L_TINT_MAX_INTERRUPT);
+ spinlock_t bitmap_lock;
+ unsigned int hwirq[RZG2L_TINT_MAX_INTERRUPT];
spinlock_t lock;
};
static void rzg2l_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
+ unsigned int virq;
+
pinctrl_gpio_free(chip->base + offset);
+ virq = irq_find_mapping(chip->irq.domain, offset);
+ if (virq)
+ irq_dispose_mapping(virq);
+
/*
* Set the GPIO as an input to ensure that the next GPIO request won't
* drive the GPIO pin as an output.
}
};
+static int rzg2l_gpio_get_gpioint(unsigned int virq)
+{
+ unsigned int gpioint;
+ unsigned int i;
+ u32 port, bit;
+
+ port = virq / 8;
+ bit = virq % 8;
+
+ if (port >= ARRAY_SIZE(rzg2l_gpio_configs) ||
+ bit >= RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[port]))
+ return -EINVAL;
+
+ gpioint = bit;
+ for (i = 0; i < port; i++)
+ gpioint += RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[i]);
+
+ return gpioint;
+}
+
+static void rzg2l_gpio_irq_disable(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+ unsigned int hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
+ void __iomem *addr;
+ u32 port;
+ u8 bit;
+
+ port = RZG2L_PIN_ID_TO_PORT(hwirq);
+ bit = RZG2L_PIN_ID_TO_PIN(hwirq);
+
+ addr = pctrl->base + ISEL(port);
+ if (bit >= 4) {
+ bit -= 4;
+ addr += 4;
+ }
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+ writel(readl(addr) & ~BIT(bit * 8), addr);
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ gpiochip_disable_irq(gc, hwirq);
+ irq_chip_disable_parent(d);
+}
+
+static void rzg2l_gpio_irq_enable(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+ unsigned int hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
+ void __iomem *addr;
+ u32 port;
+ u8 bit;
+
+ gpiochip_enable_irq(gc, hwirq);
+
+ port = RZG2L_PIN_ID_TO_PORT(hwirq);
+ bit = RZG2L_PIN_ID_TO_PIN(hwirq);
+
+ addr = pctrl->base + ISEL(port);
+ if (bit >= 4) {
+ bit -= 4;
+ addr += 4;
+ }
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+ writel(readl(addr) | BIT(bit * 8), addr);
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ irq_chip_enable_parent(d);
+}
+
+static int rzg2l_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ return irq_chip_set_type_parent(d, type);
+}
+
+static void rzg2l_gpio_irqc_eoi(struct irq_data *d)
+{
+ irq_chip_eoi_parent(d);
+}
+
+static void rzg2l_gpio_irq_print_chip(struct irq_data *data, struct seq_file *p)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ seq_printf(p, dev_name(gc->parent));
+}
+
+static const struct irq_chip rzg2l_gpio_irqchip = {
+ .name = "rzg2l-gpio",
+ .irq_disable = rzg2l_gpio_irq_disable,
+ .irq_enable = rzg2l_gpio_irq_enable,
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_set_type = rzg2l_gpio_irq_set_type,
+ .irq_eoi = rzg2l_gpio_irqc_eoi,
+ .irq_print_chip = rzg2l_gpio_irq_print_chip,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+ unsigned int child,
+ unsigned int child_type,
+ unsigned int *parent,
+ unsigned int *parent_type)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(gc);
+ unsigned long flags;
+ int gpioint, irq;
+
+ gpioint = rzg2l_gpio_get_gpioint(child);
+ if (gpioint < 0)
+ return gpioint;
+
+ spin_lock_irqsave(&pctrl->bitmap_lock, flags);
+ irq = bitmap_find_free_region(pctrl->tint_slot, RZG2L_TINT_MAX_INTERRUPT, get_order(1));
+ spin_unlock_irqrestore(&pctrl->bitmap_lock, flags);
+ if (irq < 0)
+ return -ENOSPC;
+ pctrl->hwirq[irq] = child;
+ irq += RZG2L_TINT_IRQ_START_INDEX;
+
+ /* All these interrupts are level high in the CPU */
+ *parent_type = IRQ_TYPE_LEVEL_HIGH;
+ *parent = RZG2L_PACK_HWIRQ(gpioint, irq);
+ return 0;
+}
+
+static int rzg2l_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
+{
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
+
+ fwspec->fwnode = chip->irq.parent_domain->fwnode;
+ fwspec->param_count = 2;
+ fwspec->param[0] = parent_hwirq;
+ fwspec->param[1] = parent_type;
+
+ return 0;
+}
+
+static void rzg2l_gpio_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *d;
+
+ d = irq_domain_get_irq_data(domain, virq);
+ if (d) {
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
+ unsigned int i;
+
+ for (i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
+ if (pctrl->hwirq[i] == hwirq) {
+ spin_lock_irqsave(&pctrl->bitmap_lock, flags);
+ bitmap_release_region(pctrl->tint_slot, i, get_order(1));
+ spin_unlock_irqrestore(&pctrl->bitmap_lock, flags);
+ pctrl->hwirq[i] = 0;
+ break;
+ }
+ }
+ }
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static void rzg2l_init_irq_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(gc);
+ struct gpio_chip *chip = &pctrl->gpio_chip;
+ unsigned int offset;
+
+ /* Forbid unused lines to be mapped as IRQs */
+ for (offset = 0; offset < chip->ngpio; offset++) {
+ u32 port, bit;
+
+ port = offset / 8;
+ bit = offset % 8;
+
+ if (port >= ARRAY_SIZE(rzg2l_gpio_configs) ||
+ bit >= RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[port]))
+ clear_bit(offset, valid_mask);
+ }
+}
+
static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl)
{
struct device_node *np = pctrl->dev->of_node;
struct gpio_chip *chip = &pctrl->gpio_chip;
const char *name = dev_name(pctrl->dev);
+ struct irq_domain *parent_domain;
struct of_phandle_args of_args;
+ struct device_node *parent_np;
+ struct gpio_irq_chip *girq;
int ret;
+ parent_np = of_irq_find_parent(np);
+ if (!parent_np)
+ return -ENXIO;
+
+ parent_domain = irq_find_host(parent_np);
+ of_node_put(parent_np);
+ if (!parent_domain)
+ return -EPROBE_DEFER;
+
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &of_args);
if (ret) {
dev_err(pctrl->dev, "Unable to parse gpio-ranges\n");
chip->base = -1;
chip->ngpio = of_args.args[2];
+ girq = &chip->irq;
+ gpio_irq_chip_set_chip(girq, &rzg2l_gpio_irqchip);
+ girq->fwnode = of_node_to_fwnode(np);
+ girq->parent_domain = parent_domain;
+ girq->child_to_parent_hwirq = rzg2l_gpio_child_to_parent_hwirq;
+ girq->populate_parent_alloc_arg = rzg2l_gpio_populate_parent_fwspec;
+ girq->child_irq_domain_ops.free = rzg2l_gpio_irq_domain_free;
+ girq->init_valid_mask = rzg2l_init_irq_valid_mask;
+
pctrl->gpio_range.id = 0;
pctrl->gpio_range.pin_base = 0;
pctrl->gpio_range.base = 0;
}
spin_lock_init(&pctrl->lock);
+ spin_lock_init(&pctrl->bitmap_lock);
platform_set_drvdata(pdev, pctrl);
/* --------------------------------------------------------------------- */
+static int __init tpacpi_evaluate_bcl(struct acpi_device *adev, void *not_used)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ int rc;
+
+ status = acpi_evaluate_object(adev->handle, "_BCL", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return 0;
+
+ obj = buffer.pointer;
+ if (!obj || obj->type != ACPI_TYPE_PACKAGE) {
+ acpi_handle_info(adev->handle,
+ "Unknown _BCL data, please report this to %s\n",
+ TPACPI_MAIL);
+ rc = 0;
+ } else {
+ rc = obj->package.count;
+ }
+ kfree(obj);
+
+ return rc;
+}
+
/*
* Call _BCL method of video device. On some ThinkPads this will
* switch the firmware to the ACPI brightness control mode.
static int __init tpacpi_query_bcl_levels(acpi_handle handle)
{
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *obj;
- struct acpi_device *device, *child;
- int rc;
+ struct acpi_device *device;
device = acpi_fetch_acpi_dev(handle);
if (!device)
return 0;
- rc = 0;
- list_for_each_entry(child, &device->children, node) {
- acpi_status status = acpi_evaluate_object(child->handle, "_BCL",
- NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- buffer.length = ACPI_ALLOCATE_BUFFER;
- continue;
- }
-
- obj = (union acpi_object *)buffer.pointer;
- if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
- pr_err("Unknown _BCL data, please report this to %s\n",
- TPACPI_MAIL);
- rc = 0;
- } else {
- rc = obj->package.count;
- }
- break;
- }
-
- kfree(buffer.pointer);
- return rc;
+ return acpi_dev_for_each_child(device, tpacpi_evaluate_bcl, NULL);
}
static u64 scale_pd_power_uw(struct cpumask *pd_mask, u64 power)
{
- unsigned long max = 0, sum_util = 0;
+ unsigned long max, sum_util = 0;
int cpu;
- for_each_cpu_and(cpu, pd_mask, cpu_online_mask) {
-
- /*
- * The capacity is the same for all CPUs belonging to
- * the same perf domain, so a single call to
- * arch_scale_cpu_capacity() is enough. However, we
- * need the CPU parameter to be initialized by the
- * loop, so the call ends up in this block.
- *
- * We can initialize 'max' with a cpumask_first() call
- * before the loop but the bits computation is not
- * worth given the arch_scale_cpu_capacity() just
- * returns a value where the resulting assembly code
- * will be optimized by the compiler.
- */
- max = arch_scale_cpu_capacity(cpu);
- sum_util += sched_cpu_util(cpu, max);
- }
-
/*
- * In the improbable case where all the CPUs of the perf
- * domain are offline, 'max' will be zero and will lead to an
- * illegal operation with a zero division.
+ * The capacity is the same for all CPUs belonging to
+ * the same perf domain.
*/
- return max ? (power * ((sum_util << 10) / max)) >> 10 : 0;
+ max = arch_scale_cpu_capacity(cpumask_first(pd_mask));
+
+ for_each_cpu_and(cpu, pd_mask, cpu_online_mask)
+ sum_util += sched_cpu_util(cpu);
+
+ return (power * ((sum_util << 10) / max)) >> 10;
}
static u64 get_pd_power_uw(struct dtpm *dtpm)
depends on !S390
depends on COMMON_CLK
select NET_DEVLINK
+ select CRC16
help
This driver adds support for an OpenCompute time card.
To compile this driver as a module, choose M Here: the module
will be called pwm-brcmstb.c.
+config PWM_CLK
+ tristate "Clock based PWM support"
+ depends on HAVE_CLK || COMPILE_TEST
+ help
+ Generic PWM framework driver for outputs that can be
+ muxed to clocks.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-clk.
+
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
obj-$(CONFIG_PWM_BERLIN) += pwm-berlin.o
obj-$(CONFIG_PWM_BRCMSTB) += pwm-brcmstb.o
+obj-$(CONFIG_PWM_CLK) += pwm-clk.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
static bool pwm_ops_check(const struct pwm_chip *chip)
{
-
const struct pwm_ops *ops = chip->ops;
- /* driver supports legacy, non-atomic operation */
- if (ops->config && ops->enable && ops->disable) {
- if (IS_ENABLED(CONFIG_PWM_DEBUG))
- dev_warn(chip->dev,
- "Driver needs updating to atomic API\n");
-
- return true;
- }
-
if (!ops->apply)
return false;
}
}
-static int pwm_apply_legacy(struct pwm_chip *chip, struct pwm_device *pwm,
- const struct pwm_state *state)
-{
- int err;
- struct pwm_state initial_state = pwm->state;
-
- if (state->polarity != pwm->state.polarity) {
- if (!chip->ops->set_polarity)
- return -EINVAL;
-
- /*
- * Changing the polarity of a running PWM is only allowed when
- * the PWM driver implements ->apply().
- */
- if (pwm->state.enabled) {
- chip->ops->disable(chip, pwm);
-
- /*
- * Update pwm->state already here in case
- * .set_polarity() or another callback depend on that.
- */
- pwm->state.enabled = false;
- }
-
- err = chip->ops->set_polarity(chip, pwm, state->polarity);
- if (err)
- goto rollback;
-
- pwm->state.polarity = state->polarity;
- }
-
- if (!state->enabled) {
- if (pwm->state.enabled)
- chip->ops->disable(chip, pwm);
-
- return 0;
- }
-
- /*
- * We cannot skip calling ->config even if state->period ==
- * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
- * because we might have exited early in the last call to
- * pwm_apply_state because of !state->enabled and so the two values in
- * pwm->state might not be configured in hardware.
- */
- err = chip->ops->config(pwm->chip, pwm,
- state->duty_cycle,
- state->period);
- if (err)
- goto rollback;
-
- pwm->state.period = state->period;
- pwm->state.duty_cycle = state->duty_cycle;
-
- if (!pwm->state.enabled) {
- err = chip->ops->enable(chip, pwm);
- if (err)
- goto rollback;
- }
-
- return 0;
-
-rollback:
- pwm->state = initial_state;
- return err;
-}
-
/**
* pwm_apply_state() - atomically apply a new state to a PWM device
* @pwm: PWM device
state->usage_power == pwm->state.usage_power)
return 0;
- if (chip->ops->apply)
- err = chip->ops->apply(chip, pwm, state);
- else
- err = pwm_apply_legacy(chip, pwm, state);
+ err = chip->ops->apply(chip, pwm, state);
if (err)
return err;
/*
* Find best clk divisor:
* the smallest divisor which can fulfill the period_ns requirements.
- * If there is a gclk, the first divisor is actuallly the gclk selector
+ * If there is a gclk, the first divisor is actually the gclk selector
*/
if (tcbpwmc->gclk)
i = 1;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock based PWM controller
+ *
+ * Copyright (c) 2021 Nikita Travkin <nikita@trvn.ru>
+ *
+ * This is an "adapter" driver that allows PWM consumers to use
+ * system clocks with duty cycle control as PWM outputs.
+ *
+ * Limitations:
+ * - Due to the fact that exact behavior depends on the underlying
+ * clock driver, various limitations are possible.
+ * - Underlying clock may not be able to give 0% or 100% duty cycle
+ * (constant off or on), exact behavior will depend on the clock.
+ * - When the PWM is disabled, the clock will be disabled as well,
+ * line state will depend on the clock.
+ * - The clk API doesn't expose the necessary calls to implement
+ * .get_state().
+ */
+
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/pwm.h>
+
+struct pwm_clk_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ bool clk_enabled;
+};
+
+#define to_pwm_clk_chip(_chip) container_of(_chip, struct pwm_clk_chip, chip)
+
+static int pwm_clk_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct pwm_clk_chip *pcchip = to_pwm_clk_chip(chip);
+ int ret;
+ u32 rate;
+ u64 period = state->period;
+ u64 duty_cycle = state->duty_cycle;
+
+ if (!state->enabled) {
+ if (pwm->state.enabled) {
+ clk_disable(pcchip->clk);
+ pcchip->clk_enabled = false;
+ }
+ return 0;
+ } else if (!pwm->state.enabled) {
+ ret = clk_enable(pcchip->clk);
+ if (ret)
+ return ret;
+ pcchip->clk_enabled = true;
+ }
+
+ /*
+ * We have to enable the clk before setting the rate and duty_cycle,
+ * that however results in a window where the clk is on with a
+ * (potentially) different setting. Also setting period and duty_cycle
+ * are two separate calls, so that probably isn't atomic either.
+ */
+
+ rate = DIV64_U64_ROUND_UP(NSEC_PER_SEC, period);
+ ret = clk_set_rate(pcchip->clk, rate);
+ if (ret)
+ return ret;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ duty_cycle = period - duty_cycle;
+
+ return clk_set_duty_cycle(pcchip->clk, duty_cycle, period);
+}
+
+static const struct pwm_ops pwm_clk_ops = {
+ .apply = pwm_clk_apply,
+ .owner = THIS_MODULE,
+};
+
+static int pwm_clk_probe(struct platform_device *pdev)
+{
+ struct pwm_clk_chip *pcchip;
+ int ret;
+
+ pcchip = devm_kzalloc(&pdev->dev, sizeof(*pcchip), GFP_KERNEL);
+ if (!pcchip)
+ return -ENOMEM;
+
+ pcchip->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pcchip->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(pcchip->clk),
+ "Failed to get clock\n");
+
+ pcchip->chip.dev = &pdev->dev;
+ pcchip->chip.ops = &pwm_clk_ops;
+ pcchip->chip.npwm = 1;
+
+ ret = clk_prepare(pcchip->clk);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "Failed to prepare clock\n");
+
+ ret = pwmchip_add(&pcchip->chip);
+ if (ret < 0) {
+ clk_unprepare(pcchip->clk);
+ return dev_err_probe(&pdev->dev, ret, "Failed to add pwm chip\n");
+ }
+
+ platform_set_drvdata(pdev, pcchip);
+ return 0;
+}
+
+static int pwm_clk_remove(struct platform_device *pdev)
+{
+ struct pwm_clk_chip *pcchip = platform_get_drvdata(pdev);
+
+ pwmchip_remove(&pcchip->chip);
+
+ if (pcchip->clk_enabled)
+ clk_disable(pcchip->clk);
+
+ clk_unprepare(pcchip->clk);
+
+ return 0;
+}
+
+static const struct of_device_id pwm_clk_dt_ids[] = {
+ { .compatible = "clk-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_clk_dt_ids);
+
+static struct platform_driver pwm_clk_driver = {
+ .driver = {
+ .name = "pwm-clk",
+ .of_match_table = pwm_clk_dt_ids,
+ },
+ .probe = pwm_clk_probe,
+ .remove = pwm_clk_remove,
+};
+module_platform_driver(pwm_clk_driver);
+
+MODULE_ALIAS("platform:pwm-clk");
+MODULE_AUTHOR("Nikita Travkin <nikita@trvn.ru>");
+MODULE_DESCRIPTION("Clock based PWM driver");
+MODULE_LICENSE("GPL");
unsigned long clk_rate;
unsigned int period_ns;
unsigned int min_period_ns;
- unsigned int max_period_ns;
+ u64 max_period_ns;
unsigned int period_event;
unsigned long event_map;
struct mutex res_lock;
mutex_unlock(&lpc18xx_pwm->res_lock);
}
-static void lpc18xx_pwm_config_period(struct pwm_chip *chip, int period_ns)
+static void lpc18xx_pwm_config_period(struct pwm_chip *chip, u64 period_ns)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
- u64 val;
+ u32 val;
- val = (u64)period_ns * lpc18xx_pwm->clk_rate;
- do_div(val, NSEC_PER_SEC);
+ /*
+ * With clk_rate < NSEC_PER_SEC this cannot overflow.
+ * With period_ns < max_period_ns this also fits into an u32.
+ * As period_ns >= min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, lpc18xx_pwm->clk_rate);
+ * we have val >= 1.
+ */
+ val = mul_u64_u64_div_u64(period_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCH(lpc18xx_pwm->period_event),
- (u32)val - 1);
+ val - 1);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCHREL(lpc18xx_pwm->period_event),
- (u32)val - 1);
+ val - 1);
}
static void lpc18xx_pwm_config_duty(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns)
+ struct pwm_device *pwm, u64 duty_ns)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
- u64 val;
+ u32 val;
- val = (u64)duty_ns * lpc18xx_pwm->clk_rate;
- do_div(val, NSEC_PER_SEC);
+ /*
+ * With clk_rate < NSEC_PER_SEC this cannot overflow.
+ * With duty_ns <= period_ns < max_period_ns this also fits into an u32.
+ */
+ val = mul_u64_u64_div_u64(duty_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCH(lpc18xx_data->duty_event),
- (u32)val);
+ val);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCHREL(lpc18xx_data->duty_event),
- (u32)val);
+ val);
}
static int lpc18xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return PTR_ERR(lpc18xx_pwm->base);
lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
- if (IS_ERR(lpc18xx_pwm->pwm_clk)) {
- dev_err(&pdev->dev, "failed to get pwm clock\n");
- return PTR_ERR(lpc18xx_pwm->pwm_clk);
- }
+ if (IS_ERR(lpc18xx_pwm->pwm_clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk),
+ "failed to get pwm clock\n");
ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not prepare or enable pwm clock\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "could not prepare or enable pwm clock\n");
lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
if (!lpc18xx_pwm->clk_rate) {
- dev_err(&pdev->dev, "pwm clock has no frequency\n");
- ret = -EINVAL;
+ ret = dev_err_probe(&pdev->dev,
+ -EINVAL, "pwm clock has no frequency\n");
+ goto disable_pwmclk;
+ }
+
+ /*
+ * If clkrate is too fast, the calculations in .apply() might overflow.
+ */
+ if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC) {
+ ret = dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n");
goto disable_pwmclk;
}
mutex_init(&lpc18xx_pwm->res_lock);
mutex_init(&lpc18xx_pwm->period_lock);
- val = (u64)NSEC_PER_SEC * LPC18XX_PWM_TIMER_MAX;
- do_div(val, lpc18xx_pwm->clk_rate);
- lpc18xx_pwm->max_period_ns = val;
+ lpc18xx_pwm->max_period_ns =
+ mul_u64_u64_div_u64(NSEC_PER_SEC, LPC18XX_PWM_TIMER_MAX, lpc18xx_pwm->clk_rate);
lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC,
lpc18xx_pwm->clk_rate);
ret = pwmchip_add(&lpc18xx_pwm->chip);
if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+ dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
goto disable_pwmclk;
}
.has_ck_26m_sel = true,
};
+static const struct pwm_mediatek_of_data mt8365_pwm_data = {
+ .num_pwms = 3,
+ .pwm45_fixup = false,
+ .has_ck_26m_sel = true,
+};
+
static const struct pwm_mediatek_of_data mt8516_pwm_data = {
.num_pwms = 5,
.pwm45_fixup = false,
{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
+ { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
{ .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
{ },
};
#define PWM_SIFIVE_PWMCFG 0x0
#define PWM_SIFIVE_PWMCOUNT 0x8
#define PWM_SIFIVE_PWMS 0x10
-#define PWM_SIFIVE_PWMCMP0 0x20
+#define PWM_SIFIVE_PWMCMP(i) (0x20 + 4 * (i))
/* PWMCFG fields */
#define PWM_SIFIVE_PWMCFG_SCALE GENMASK(3, 0)
#define PWM_SIFIVE_PWMCFG_GANG BIT(24)
#define PWM_SIFIVE_PWMCFG_IP BIT(28)
-/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */
-#define PWM_SIFIVE_SIZE_PWMCMP 4
#define PWM_SIFIVE_CMPWIDTH 16
#define PWM_SIFIVE_DEFAULT_PERIOD 10000000
struct pwm_sifive_ddata {
struct pwm_chip chip;
- struct mutex lock; /* lock to protect user_count */
+ struct mutex lock; /* lock to protect user_count and approx_period */
struct notifier_block notifier;
struct clk *clk;
void __iomem *regs;
mutex_unlock(&ddata->lock);
}
+/* Called holding ddata->lock */
static void pwm_sifive_update_clock(struct pwm_sifive_ddata *ddata,
unsigned long rate)
{
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
u32 duty, val;
- duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP0 +
- pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
+ duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
state->enabled = duty > 0;
state->polarity = PWM_POLARITY_INVERSED;
}
-static int pwm_sifive_enable(struct pwm_chip *chip, bool enable)
-{
- struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
- int ret;
-
- if (enable) {
- ret = clk_enable(ddata->clk);
- if (ret) {
- dev_err(ddata->chip.dev, "Enable clk failed\n");
- return ret;
- }
- } else {
- clk_disable(ddata->clk);
- }
-
- return 0;
-}
-
static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
if (state->polarity != PWM_POLARITY_INVERSED)
return -EINVAL;
- ret = clk_enable(ddata->clk);
- if (ret) {
- dev_err(ddata->chip.dev, "Enable clk failed\n");
- return ret;
- }
-
- mutex_lock(&ddata->lock);
cur_state = pwm->state;
enabled = cur_state.enabled;
/* The hardware cannot generate a 100% duty cycle */
frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
+ mutex_lock(&ddata->lock);
if (state->period != ddata->approx_period) {
if (ddata->user_count != 1) {
- ret = -EBUSY;
- goto exit;
+ mutex_unlock(&ddata->lock);
+ return -EBUSY;
}
ddata->approx_period = state->period;
pwm_sifive_update_clock(ddata, clk_get_rate(ddata->clk));
}
+ mutex_unlock(&ddata->lock);
- writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP0 +
- pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
+ /*
+ * If the PWM is enabled the clk is already on. So only enable it
+ * conditionally to have it on exactly once afterwards independent of
+ * the PWM state.
+ */
+ if (!enabled) {
+ ret = clk_enable(ddata->clk);
+ if (ret) {
+ dev_err(ddata->chip.dev, "Enable clk failed\n");
+ return ret;
+ }
+ }
- if (state->enabled != enabled)
- pwm_sifive_enable(chip, state->enabled);
+ writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
-exit:
- clk_disable(ddata->clk);
- mutex_unlock(&ddata->lock);
- return ret;
+ if (!state->enabled)
+ clk_disable(ddata->clk);
+
+ return 0;
}
static const struct pwm_ops pwm_sifive_ops = {
struct pwm_sifive_ddata *ddata;
struct pwm_chip *chip;
int ret;
+ u32 val;
+ unsigned int enabled_pwms = 0, enabled_clks = 1;
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return ret;
}
+ val = readl(ddata->regs + PWM_SIFIVE_PWMCFG);
+ if (val & PWM_SIFIVE_PWMCFG_EN_ALWAYS) {
+ unsigned int i;
+
+ for (i = 0; i < chip->npwm; ++i) {
+ val = readl(ddata->regs + PWM_SIFIVE_PWMCMP(i));
+ if (val > 0)
+ ++enabled_pwms;
+ }
+ }
+
+ /* The clk should be on once for each running PWM. */
+ if (enabled_pwms) {
+ while (enabled_clks < enabled_pwms) {
+ /* This is not expected to fail as the clk is already on */
+ ret = clk_enable(ddata->clk);
+ if (unlikely(ret)) {
+ dev_err_probe(dev, ret, "Failed to enable clk\n");
+ goto disable_clk;
+ }
+ ++enabled_clks;
+ }
+ } else {
+ clk_disable(ddata->clk);
+ enabled_clks = 0;
+ }
+
/* Watch for changes to underlying clock frequency */
ddata->notifier.notifier_call = pwm_sifive_clock_notifier;
ret = clk_notifier_register(ddata->clk, &ddata->notifier);
unregister_clk:
clk_notifier_unregister(ddata->clk, &ddata->notifier);
disable_clk:
- clk_disable_unprepare(ddata->clk);
+ while (enabled_clks) {
+ clk_disable(ddata->clk);
+ --enabled_clks;
+ }
+ clk_unprepare(ddata->clk);
return ret;
}
static int pwm_sifive_remove(struct platform_device *dev)
{
struct pwm_sifive_ddata *ddata = platform_get_drvdata(dev);
- bool is_enabled = false;
struct pwm_device *pwm;
int ch;
+ pwmchip_remove(&ddata->chip);
+ clk_notifier_unregister(ddata->clk, &ddata->notifier);
+
for (ch = 0; ch < ddata->chip.npwm; ch++) {
pwm = &ddata->chip.pwms[ch];
- if (pwm->state.enabled) {
- is_enabled = true;
- break;
- }
+ if (pwm->state.enabled)
+ clk_disable(ddata->clk);
}
- if (is_enabled)
- clk_disable(ddata->clk);
- clk_disable_unprepare(ddata->clk);
- pwmchip_remove(&ddata->chip);
- clk_notifier_unregister(ddata->clk, &ddata->notifier);
+ clk_unprepare(ddata->clk);
return 0;
}
*
* This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
* Hemanth V <hemanthv@ti.com>
+ *
+ * Reference manual for the twl6030 is available at:
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
+ *
+ * Limitations:
+ * - The twl6030 hardware only supports two period lengths (128 clock ticks and
+ * 64 clock ticks), the driver only uses 128 ticks
+ * - The hardware doesn't support ON = 0, so the active part of a period doesn't
+ * start at its beginning.
+ * - The hardware could support inverted polarity (with a similar limitation as
+ * for normal: the last clock tick is always inactive).
+ * - The hardware emits a constant low output when disabled.
+ * - A request for .duty_cycle = 0 results in an output wave with one active
+ * clock tick per period. This should better use the disabled state.
+ * - The driver only implements setting the relative duty cycle.
+ * - The driver doesn't implement .get_state().
*/
#include <linux/module.h>
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX597X
+ tristate "Maxim 597x power switch and monitor"
+ depends on I2C
+ depends on OF
+ depends on MFD_MAX597X
+ help
+ This driver controls a Maxim 5970/5978 switch via I2C bus.
+ The MAX5970/5978 is a smart switch with no output regulation, but
+ fault protection and voltage and current monitoring capabilities.
+
config REGULATOR_MAX77620
tristate "Maxim 77620/MAX20024 voltage regulator"
depends on MFD_MAX77620 || COMPILE_TEST
2-channel buck with Thermal Shutdown and Overload Protection
6-channel High PSRR and Low Dropout LDO.
+config REGULATOR_MT6370
+ tristate "MT6370 SubPMIC Regulator"
+ depends on MFD_MT6370
+ help
+ Say Y here to enable MT6370 regulator support.
+ This driver supports the control for DisplayBias voltages and one
+ general purpose LDO which is commonly used to drive the vibrator.
+
config REGULATOR_MT6380
tristate "MediaTek MT6380 PMIC"
depends on MTK_PMIC_WRAP
RT5033 PMIC. The device supports multiple regulators like
current source, LDO and Buck.
+config REGULATOR_RT5120
+ tristate "Richtek RT5120 PMIC Regulators"
+ depends on MFD_RT5120
+ help
+ This adds support for voltage regulator in Richtek RT5120 PMIC.
+ It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN
+ to control external power source. Only BUCK1 is adjustable from
+ 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage
+ by external hardware circuit.
+
config REGULATOR_RT5190A
tristate "Richtek RT5190A PMIC"
depends on I2C
obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
+obj-$(CONFIG_REGULATOR_MAX597X) += max597x-regulator.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6359) += mt6359-regulator.o
obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
+obj-$(CONFIG_REGULATOR_MT6370) += mt6370-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o
obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
+obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o
obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o
obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o
obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
rdev->constraints->always_on = true;
}
+ if (rdev->desc->off_on_delay)
+ rdev->last_off = ktime_get();
+
/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
*/
if (rdev->constraints->always_on)
rdev->use_count++;
- } else if (rdev->desc->off_on_delay) {
- rdev->last_off = ktime_get();
}
print_constraints(rdev);
consumers[i].consumer = regulator_get(dev,
consumers[i].supply);
if (IS_ERR(consumers[i].consumer)) {
- ret = PTR_ERR(consumers[i].consumer);
consumers[i].consumer = NULL;
+ ret = dev_err_probe(dev, PTR_ERR(consumers[i].consumer),
+ "Failed to get supply '%s'",
+ consumers[i].supply);
goto err;
}
+
+ if (consumers[i].init_load_uA > 0) {
+ ret = regulator_set_load(consumers[i].consumer,
+ consumers[i].init_load_uA);
+ if (ret) {
+ i++;
+ goto err;
+ }
+ }
}
return 0;
err:
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to get supply '%s': %pe\n",
- consumers[i].supply, ERR_PTR(ret));
- else
- dev_dbg(dev, "Failed to get supply '%s', deferring\n",
- consumers[i].supply);
-
while (--i >= 0)
regulator_put(consumers[i].consumer);
}
EXPORT_SYMBOL_GPL(devm_regulator_bulk_get);
+/**
+ * devm_regulator_bulk_get_const - devm_regulator_bulk_get() w/ const data
+ *
+ * @dev: device to supply
+ * @num_consumers: number of consumers to register
+ * @in_consumers: const configuration of consumers
+ * @out_consumers: in_consumers is copied here and this is passed to
+ * devm_regulator_bulk_get().
+ *
+ * This is a convenience function to allow bulk regulator configuration
+ * to be stored "static const" in files.
+ *
+ * Return: 0 on success, an errno on failure.
+ */
+int devm_regulator_bulk_get_const(struct device *dev, int num_consumers,
+ const struct regulator_bulk_data *in_consumers,
+ struct regulator_bulk_data **out_consumers)
+{
+ *out_consumers = devm_kmemdup(dev, in_consumers,
+ num_consumers * sizeof(*in_consumers),
+ GFP_KERNEL);
+ if (*out_consumers == NULL)
+ return -ENOMEM;
+
+ return devm_regulator_bulk_get(dev, num_consumers, *out_consumers);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_bulk_get_const);
+
static void devm_rdev_release(struct device *dev, void *res)
{
regulator_unregister(*(struct regulator_dev **)res);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in MAX5970 and MAX5978 IC
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/max597x.h>
+
+struct max597x_regulator {
+ int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
+ struct regmap *regmap;
+};
+
+enum max597x_regulator_id {
+ MAX597X_SW0,
+ MAX597X_SW1,
+};
+
+static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
+{
+ int ret, reg;
+
+ /* Status1 register contains the soft strap values sampled at POR */
+ ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS1, ®);
+ if (ret)
+ return ret;
+
+ /* Check soft straps match requested mode */
+ if (severity == REGULATOR_SEVERITY_PROT) {
+ if (STATUS1_PROT(reg) != STATUS1_PROT_SHUTDOWN)
+ return -EOPNOTSUPP;
+
+ return 0;
+ }
+ if (STATUS1_PROT(reg) == STATUS1_PROT_SHUTDOWN)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
+static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
+ bool enable, bool overvoltage)
+{
+ int off_h, off_l, reg, ret;
+ struct max597x_regulator *data = rdev_get_drvdata(rdev);
+ int channel = rdev_get_id(rdev);
+
+ if (overvoltage) {
+ if (severity == REGULATOR_SEVERITY_WARN) {
+ off_h = MAX5970_REG_CH_OV_WARN_H(channel);
+ off_l = MAX5970_REG_CH_OV_WARN_L(channel);
+ } else {
+ off_h = MAX5970_REG_CH_OV_CRIT_H(channel);
+ off_l = MAX5970_REG_CH_OV_CRIT_L(channel);
+ }
+ } else {
+ if (severity == REGULATOR_SEVERITY_WARN) {
+ off_h = MAX5970_REG_CH_UV_WARN_H(channel);
+ off_l = MAX5970_REG_CH_UV_WARN_L(channel);
+ } else {
+ off_h = MAX5970_REG_CH_UV_CRIT_H(channel);
+ off_l = MAX5970_REG_CH_UV_CRIT_L(channel);
+ }
+ }
+
+ if (enable)
+ /* reg = ADC_MASK * (lim_uV / 1000000) / (data->mon_rng / 1000000) */
+ reg = ADC_MASK * lim_uV / data->mon_rng;
+ else
+ reg = 0;
+
+ ret = regmap_write(rdev->regmap, off_h, MAX5970_VAL2REG_H(reg));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(rdev->regmap, off_l, MAX5970_VAL2REG_L(reg));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
+ bool enable)
+{
+ int ret;
+
+ /*
+ * MAX5970 has enable control as a special value in limit reg. Can't
+ * set limit but keep feature disabled or enable W/O given limit.
+ */
+ if ((lim_uV && !enable) || (!lim_uV && enable))
+ return -EINVAL;
+
+ ret = max597x_uvp_ovp_check_mode(rdev, severity);
+ if (ret)
+ return ret;
+
+ return max597x_set_vp(rdev, lim_uV, severity, enable, false);
+}
+
+static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
+ bool enable)
+{
+ int ret;
+
+ /*
+ * MAX5970 has enable control as a special value in limit reg. Can't
+ * set limit but keep feature disabled or enable W/O given limit.
+ */
+ if ((lim_uV && !enable) || (!lim_uV && enable))
+ return -EINVAL;
+
+ ret = max597x_uvp_ovp_check_mode(rdev, severity);
+ if (ret)
+ return ret;
+
+ return max597x_set_vp(rdev, lim_uV, severity, enable, true);
+}
+
+static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
+ int severity, bool enable)
+{
+ int ret, val, reg;
+ unsigned int vthst, vthfst;
+
+ struct max597x_regulator *data = rdev_get_drvdata(rdev);
+ int rdev_id = rdev_get_id(rdev);
+ /*
+ * MAX5970 doesn't has enable control for ocp.
+ * If limit is specified but enable is not set then hold the value in
+ * variable & later use it when ocp needs to be enabled.
+ */
+ if (lim_uA != 0 && lim_uA != data->lim_uA)
+ data->lim_uA = lim_uA;
+
+ if (severity != REGULATOR_SEVERITY_PROT)
+ return -EINVAL;
+
+ if (enable) {
+
+ /* Calc Vtrip threshold in uV. */
+ vthst =
+ div_u64(mul_u32_u32(data->shunt_micro_ohms, data->lim_uA),
+ 1000000);
+
+ /*
+ * As recommended in datasheed, add 20% margin to avoid
+ * spurious event & passive component tolerance.
+ */
+ vthst = div_u64(mul_u32_u32(vthst, 120), 100);
+
+ /* Calc fast Vtrip threshold in uV */
+ vthfst = vthst * (MAX5970_FAST2SLOW_RATIO / 100);
+
+ if (vthfst > data->irng) {
+ dev_err(&rdev->dev, "Current limit out of range\n");
+ return -EINVAL;
+ }
+ /* Fast trip threshold to be programmed */
+ val = div_u64(mul_u32_u32(0xFF, vthfst), data->irng);
+ } else
+ /*
+ * Since there is no option to disable ocp, set limit to max
+ * value
+ */
+ val = 0xFF;
+
+ reg = MAX5970_REG_DAC_FAST(rdev_id);
+ ret = regmap_write(rdev->regmap, reg, val);
+
+ return ret;
+}
+
+static int max597x_get_status(struct regulator_dev *rdev)
+{
+ int val, ret;
+
+ ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS3, &val);
+ if (ret)
+ return REGULATOR_FAILED_RETRY;
+
+ if (val & MAX5970_STATUS3_ALERT)
+ return REGULATOR_STATUS_ERROR;
+
+ ret = regulator_is_enabled_regmap(rdev);
+ if (ret < 0)
+ return ret;
+
+ if (ret)
+ return REGULATOR_STATUS_ON;
+
+ return REGULATOR_STATUS_OFF;
+}
+
+static const struct regulator_ops max597x_switch_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = max597x_get_status,
+ .set_over_voltage_protection = max597x_set_ovp,
+ .set_under_voltage_protection = max597x_set_uvp,
+ .set_over_current_protection = max597x_set_ocp,
+};
+
+static int max597x_dt_parse(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct max597x_regulator *data = cfg->driver_data;
+ int ret = 0;
+
+ ret =
+ of_property_read_u32(np, "shunt-resistor-micro-ohms",
+ &data->shunt_micro_ohms);
+ if (ret < 0)
+ dev_err(cfg->dev,
+ "property 'shunt-resistor-micro-ohms' not found, err %d\n",
+ ret);
+ return ret;
+
+}
+
+#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &max597x_switch_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MAX597X_##_ID, \
+ .owner = THIS_MODULE, \
+ .supply_name = _supply, \
+ .enable_reg = _ereg, \
+ .enable_mask = CHXEN((_chan)), \
+ .of_parse_cb = max597x_dt_parse, \
+}
+
+static const struct regulator_desc regulators[] = {
+ MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
+ MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
+};
+
+static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+
+ ret = regmap_read(map, reg, val);
+ if (ret)
+ return ret;
+
+ if (*val)
+ return regmap_write(map, reg, *val);
+
+ return 0;
+}
+
+static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
+ unsigned long *dev_mask)
+{
+ struct regulator_err_state *stat;
+ struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
+ int val, ret, i;
+
+ ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
+ if (ret)
+ return REGULATOR_FAILED_RETRY;
+
+ *dev_mask = 0;
+ for (i = 0; i < d->num_switches; i++) {
+ stat = &rid->states[i];
+ stat->notifs = 0;
+ stat->errors = 0;
+ }
+
+ for (i = 0; i < d->num_switches; i++) {
+ stat = &rid->states[i];
+
+ if (val & UV_STATUS_CRIT(i)) {
+ *dev_mask |= 1 << i;
+ stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE;
+ stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE;
+ } else if (val & UV_STATUS_WARN(i)) {
+ *dev_mask |= 1 << i;
+ stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
+ stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
+ }
+ }
+
+ ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
+ if (ret)
+ return REGULATOR_FAILED_RETRY;
+
+ for (i = 0; i < d->num_switches; i++) {
+ stat = &rid->states[i];
+
+ if (val & OV_STATUS_CRIT(i)) {
+ *dev_mask |= 1 << i;
+ stat->notifs |= REGULATOR_EVENT_REGULATION_OUT;
+ stat->errors |= REGULATOR_ERROR_REGULATION_OUT;
+ } else if (val & OV_STATUS_WARN(i)) {
+ *dev_mask |= 1 << i;
+ stat->notifs |= REGULATOR_EVENT_OVER_VOLTAGE_WARN;
+ stat->errors |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
+ }
+ }
+
+ ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
+ if (ret)
+ return REGULATOR_FAILED_RETRY;
+
+ for (i = 0; i < d->num_switches; i++) {
+ stat = &rid->states[i];
+
+ if (val & OC_STATUS_WARN(i)) {
+ *dev_mask |= 1 << i;
+ stat->notifs |= REGULATOR_EVENT_OVER_CURRENT_WARN;
+ stat->errors |= REGULATOR_ERROR_OVER_CURRENT_WARN;
+ }
+ }
+
+ ret = regmap_read(d->regmap, MAX5970_REG_STATUS0, &val);
+ if (ret)
+ return REGULATOR_FAILED_RETRY;
+
+ for (i = 0; i < d->num_switches; i++) {
+ stat = &rid->states[i];
+
+ if ((val & MAX5970_CB_IFAULTF(i))
+ || (val & MAX5970_CB_IFAULTS(i))) {
+ *dev_mask |= 1 << i;
+ stat->notifs |=
+ REGULATOR_EVENT_OVER_CURRENT |
+ REGULATOR_EVENT_DISABLE;
+ stat->errors |=
+ REGULATOR_ERROR_OVER_CURRENT | REGULATOR_ERROR_FAIL;
+
+ /* Clear the sub-IRQ status */
+ regulator_disable_regmap(stat->rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct regmap_config max597x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX_REGISTERS,
+};
+
+static int max597x_adc_range(struct regmap *regmap, const int ch,
+ u32 *irng, u32 *mon_rng)
+{
+ unsigned int reg;
+ int ret;
+
+ /* Decode current ADC range */
+ ret = regmap_read(regmap, MAX5970_REG_STATUS2, ®);
+ if (ret)
+ return ret;
+ switch (MAX5970_IRNG(reg, ch)) {
+ case 0:
+ *irng = 100000; /* 100 mV */
+ break;
+ case 1:
+ *irng = 50000; /* 50 mV */
+ break;
+ case 2:
+ *irng = 25000; /* 25 mV */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Decode current voltage monitor range */
+ ret = regmap_read(regmap, MAX5970_REG_MON_RANGE, ®);
+ if (ret)
+ return ret;
+
+ *mon_rng = MAX5970_MON_MAX_RANGE_UV >> MAX5970_MON(reg, ch);
+
+ return 0;
+}
+
+static int max597x_setup_irq(struct device *dev,
+ int irq,
+ struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
+ int num_switches, struct max597x_regulator *data)
+{
+ struct regulator_irq_desc max597x_notif = {
+ .name = "max597x-irq",
+ .map_event = max597x_irq_handler,
+ .data = data,
+ };
+ int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
+ REGULATOR_ERROR_UNDER_VOLTAGE_WARN |
+ REGULATOR_ERROR_OVER_VOLTAGE_WARN |
+ REGULATOR_ERROR_REGULATION_OUT |
+ REGULATOR_ERROR_OVER_CURRENT |
+ REGULATOR_ERROR_OVER_CURRENT_WARN | REGULATOR_ERROR_FAIL;
+ void *irq_helper;
+
+ /* Register notifiers - can fail if IRQ is not given */
+ irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
+ irq, 0, errs, NULL,
+ &rdevs[0], num_switches);
+ if (IS_ERR(irq_helper)) {
+ if (PTR_ERR(irq_helper) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(dev, "IRQ disabled %pe\n", irq_helper);
+ }
+
+ return 0;
+}
+
+static int max597x_regulator_probe(struct platform_device *pdev)
+{
+
+
+ struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
+ struct max597x_regulator *data;
+
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
+ int num_switches = max597x->num_switches;
+ int ret, i;
+
+ for (i = 0; i < num_switches; i++) {
+ data =
+ devm_kzalloc(max597x->dev, sizeof(struct max597x_regulator),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->num_switches = num_switches;
+ data->regmap = max597x->regmap;
+
+ ret = max597x_adc_range(data->regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
+ if (ret < 0)
+ return ret;
+
+ data->irng = max597x->irng[i];
+ data->mon_rng = max597x->mon_rng[i];
+
+ config.dev = max597x->dev;
+ config.driver_data = (void *)data;
+ config.regmap = data->regmap;
+ rdev = devm_regulator_register(max597x->dev,
+ ®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(max597x->dev, "failed to register regulator %s\n",
+ regulators[i].name);
+ return PTR_ERR(rdev);
+ }
+ rdevs[i] = rdev;
+ max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
+ }
+
+ if (max597x->irq) {
+ ret =
+ max597x_setup_irq(max597x->dev, max597x->irq, rdevs, num_switches,
+ data);
+ if (ret) {
+ dev_err(max597x->dev, "IRQ setup failed");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static struct platform_driver max597x_regulator_driver = {
+ .driver = {
+ .name = "max597x-regulator",
+ },
+ .probe = max597x_regulator_probe,
+};
+
+module_platform_driver(max597x_regulator_driver);
+
+
+MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
+MODULE_DESCRIPTION("MAX5970_hot-swap controller driver");
+MODULE_LICENSE("GPL v2");
//
// Author: Saravanan Sekar <sravanhome@gmail.com>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
-#include <linux/i2c.h>
#define MP5416_REG_CTL0 0x00
#define MP5416_REG_CTL1 0x01
MP5416LDO("ldo4", 4, BIT(1)),
};
+static struct regulator_desc mp5496_regulators_desc[MP5416_MAX_REGULATORS] = {
+ MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1),
+ MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 1),
+ MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1),
+ MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 1),
+ MP5416LDO("ldo1", 1, BIT(4)),
+ MP5416LDO("ldo2", 2, BIT(3)),
+ MP5416LDO("ldo3", 3, BIT(2)),
+ MP5416LDO("ldo4", 4, BIT(1)),
+};
+
static int mp5416_i2c_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct regulator_config config = { NULL, };
+ static const struct regulator_desc *desc;
struct regulator_dev *rdev;
struct regmap *regmap;
int i;
return PTR_ERR(regmap);
}
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -ENODEV;
+
config.dev = dev;
config.regmap = regmap;
for (i = 0; i < MP5416_MAX_REGULATORS; i++) {
rdev = devm_regulator_register(dev,
- &mp5416_regulators_desc[i],
+ &desc[i],
&config);
if (IS_ERR(rdev)) {
dev_err(dev, "Failed to register regulator!\n");
}
static const struct of_device_id mp5416_of_match[] = {
- { .compatible = "mps,mp5416" },
+ { .compatible = "mps,mp5416", .data = &mp5416_regulators_desc },
+ { .compatible = "mps,mp5496", .data = &mp5496_regulators_desc },
{},
};
MODULE_DEVICE_TABLE(of, mp5416_of_match);
static const struct i2c_device_id mp5416_id[] = {
{ "mp5416", },
+ { "mp5496", },
{ },
};
MODULE_DEVICE_TABLE(i2c, mp5416_id);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+enum {
+ MT6370_IDX_DSVBOOST = 0,
+ MT6370_IDX_DSVPOS,
+ MT6370_IDX_DSVNEG,
+ MT6370_IDX_VIBLDO,
+ MT6370_MAX_IDX
+};
+
+#define MT6370_REG_LDO_CFG 0x180
+#define MT6370_REG_LDO_VOUT 0x181
+#define MT6370_REG_DB_CTRL1 0x1B0
+#define MT6370_REG_DB_CTRL2 0x1B1
+#define MT6370_REG_DB_VBST 0x1B2
+#define MT6370_REG_DB_VPOS 0x1B3
+#define MT6370_REG_DB_VNEG 0x1B4
+#define MT6370_REG_LDO_STAT 0x1DC
+#define MT6370_REG_DB_STAT 0x1DF
+
+#define MT6370_LDOOMS_MASK BIT(7)
+#define MT6370_LDOEN_MASK BIT(7)
+#define MT6370_LDOVOUT_MASK GENMASK(3, 0)
+#define MT6370_DBPERD_MASK (BIT(7) | BIT(4))
+#define MT6370_DBEXTEN_MASK BIT(0)
+#define MT6370_DBVPOSEN_MASK BIT(6)
+#define MT6370_DBVPOSDISG_MASK BIT(5)
+#define MT6370_DBVNEGEN_MASK BIT(3)
+#define MT6370_DBVNEGDISG_MASK BIT(2)
+#define MT6370_DBALLON_MASK (MT6370_DBVPOSEN_MASK | MT6370_DBVNEGEN_MASK)
+#define MT6370_DBSLEW_MASK GENMASK(7, 6)
+#define MT6370_DBVOUT_MASK GENMASK(5, 0)
+#define MT6370_LDOOC_EVT_MASK BIT(7)
+#define MT6370_POSSCP_EVT_MASK BIT(7)
+#define MT6370_NEGSCP_EVT_MASK BIT(6)
+#define MT6370_BSTOCP_EVT_MASK BIT(5)
+#define MT6370_POSOCP_EVT_MASK BIT(4)
+#define MT6370_NEGOCP_EVT_MASK BIT(3)
+
+#define MT6370_LDO_MINUV 1600000
+#define MT6370_LDO_STPUV 200000
+#define MT6370_LDO_N_VOLT 13
+#define MT6370_DBVBOOST_MINUV 4000000
+#define MT6370_DBVBOOST_STPUV 50000
+#define MT6370_DBVBOOST_N_VOLT 45
+#define MT6370_DBVOUT_MINUV 4000000
+#define MT6370_DBVOUT_STPUV 50000
+#define MT6370_DBVOUT_N_VOLT 41
+
+struct mt6370_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_dev *rdev[MT6370_MAX_IDX];
+ bool use_external_ctrl;
+};
+
+static const unsigned int mt6370_vpos_ramp_tbl[] = { 8540, 5840, 4830, 3000 };
+static const unsigned int mt6370_vneg_ramp_tbl[] = { 10090, 6310, 5050, 3150 };
+
+static int mt6370_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int stat_reg, stat, rpt_flags = 0;
+ int rid = rdev_get_id(rdev), ret;
+
+ if (rid == MT6370_IDX_VIBLDO)
+ stat_reg = MT6370_REG_LDO_STAT;
+ else
+ stat_reg = MT6370_REG_DB_STAT;
+
+ ret = regmap_read(regmap, stat_reg, &stat);
+ if (ret)
+ return ret;
+
+ switch (rid) {
+ case MT6370_IDX_DSVBOOST:
+ if (stat & MT6370_BSTOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ case MT6370_IDX_DSVPOS:
+ if (stat & MT6370_POSSCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (stat & MT6370_POSOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ case MT6370_IDX_DSVNEG:
+ if (stat & MT6370_NEGSCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (stat & MT6370_NEGOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ default:
+ if (stat & MT6370_LDOOC_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ }
+
+ *flags = rpt_flags;
+ return 0;
+}
+
+static const struct regulator_ops mt6370_dbvboost_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_bypass = regulator_get_bypass_regmap,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_dbvout_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_ldo_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static int mt6370_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct mt6370_priv *priv = config->driver_data;
+ struct gpio_desc *enable_gpio;
+ int ret;
+
+ enable_gpio = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0,
+ GPIOD_OUT_HIGH |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+ desc->name);
+ if (IS_ERR(enable_gpio)) {
+ config->ena_gpiod = NULL;
+ return 0;
+ }
+
+ /*
+ * RG control by default
+ * Only if all are using external pin, change all by external control
+ */
+ if (priv->use_external_ctrl) {
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_DB_CTRL1,
+ MT6370_DBEXTEN_MASK,
+ MT6370_DBEXTEN_MASK);
+ if (ret)
+ return ret;
+ }
+
+ config->ena_gpiod = enable_gpio;
+ priv->use_external_ctrl = true;
+ return 0;
+}
+
+static const struct regulator_desc mt6370_regulator_descs[] = {
+ {
+ .name = "mt6370-dsv-vbst",
+ .of_match = of_match_ptr("dsvbst"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVBOOST,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &mt6370_dbvboost_ops,
+ .min_uV = MT6370_DBVBOOST_MINUV,
+ .uV_step = MT6370_DBVBOOST_STPUV,
+ .n_voltages = MT6370_DBVBOOST_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VBST,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .bypass_reg = MT6370_REG_DB_CTRL1,
+ .bypass_mask = MT6370_DBPERD_MASK,
+ .bypass_val_on = MT6370_DBPERD_MASK,
+ },
+ {
+ .name = "mt6370-dsv-vpos",
+ .of_match = of_match_ptr("dsvpos"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVPOS,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .of_parse_cb = mt6370_of_parse_cb,
+ .ops = &mt6370_dbvout_ops,
+ .min_uV = MT6370_DBVOUT_MINUV,
+ .uV_step = MT6370_DBVOUT_STPUV,
+ .n_voltages = MT6370_DBVOUT_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VPOS,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .enable_reg = MT6370_REG_DB_CTRL2,
+ .enable_mask = MT6370_DBVPOSEN_MASK,
+ .ramp_reg = MT6370_REG_DB_VPOS,
+ .ramp_mask = MT6370_DBSLEW_MASK,
+ .ramp_delay_table = mt6370_vpos_ramp_tbl,
+ .n_ramp_values = ARRAY_SIZE(mt6370_vpos_ramp_tbl),
+ .active_discharge_reg = MT6370_REG_DB_CTRL2,
+ .active_discharge_mask = MT6370_DBVPOSDISG_MASK,
+ .active_discharge_on = MT6370_DBVPOSDISG_MASK,
+ },
+ {
+ .name = "mt6370-dsv-vneg",
+ .of_match = of_match_ptr("dsvneg"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVNEG,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .of_parse_cb = mt6370_of_parse_cb,
+ .ops = &mt6370_dbvout_ops,
+ .min_uV = MT6370_DBVOUT_MINUV,
+ .uV_step = MT6370_DBVOUT_STPUV,
+ .n_voltages = MT6370_DBVOUT_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VNEG,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .enable_reg = MT6370_REG_DB_CTRL2,
+ .enable_mask = MT6370_DBVNEGEN_MASK,
+ .ramp_reg = MT6370_REG_DB_VNEG,
+ .ramp_mask = MT6370_DBSLEW_MASK,
+ .ramp_delay_table = mt6370_vneg_ramp_tbl,
+ .n_ramp_values = ARRAY_SIZE(mt6370_vneg_ramp_tbl),
+ .active_discharge_reg = MT6370_REG_DB_CTRL2,
+ .active_discharge_mask = MT6370_DBVNEGDISG_MASK,
+ .active_discharge_on = MT6370_DBVNEGDISG_MASK,
+ },
+ {
+ .name = "mt6370-vib-ldo",
+ .of_match = of_match_ptr("vibldo"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_VIBLDO,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &mt6370_ldo_ops,
+ .min_uV = MT6370_LDO_MINUV,
+ .uV_step = MT6370_LDO_STPUV,
+ .n_voltages = MT6370_LDO_N_VOLT,
+ .vsel_reg = MT6370_REG_LDO_VOUT,
+ .vsel_mask = MT6370_LDOVOUT_MASK,
+ .enable_reg = MT6370_REG_LDO_VOUT,
+ .enable_mask = MT6370_LDOEN_MASK,
+ .active_discharge_reg = MT6370_REG_LDO_CFG,
+ .active_discharge_mask = MT6370_LDOOMS_MASK,
+ .active_discharge_on = MT6370_LDOOMS_MASK,
+ }
+};
+
+static irqreturn_t mt6370_scp_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_ocp_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_CURRENT, NULL);
+ return IRQ_HANDLED;
+}
+
+static int mt6370_regulator_irq_register(struct mt6370_priv *priv)
+{
+ struct platform_device *pdev = to_platform_device(priv->dev);
+ static const struct {
+ const char *name;
+ int rid;
+ irq_handler_t handler;
+ } mt6370_irqs[] = {
+ { "db_vpos_scp", MT6370_IDX_DSVPOS, mt6370_scp_handler },
+ { "db_vneg_scp", MT6370_IDX_DSVNEG, mt6370_scp_handler },
+ { "db_vbst_ocp", MT6370_IDX_DSVBOOST, mt6370_ocp_handler },
+ { "db_vpos_ocp", MT6370_IDX_DSVPOS, mt6370_ocp_handler },
+ { "db_vneg_ocp", MT6370_IDX_DSVNEG, mt6370_ocp_handler },
+ { "ldo_oc", MT6370_IDX_VIBLDO, mt6370_ocp_handler }
+ };
+ struct regulator_dev *rdev;
+ int i, irq, ret;
+
+ for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
+
+ rdev = priv->rdev[mt6370_irqs[i].rid];
+
+ ret = devm_request_threaded_irq(priv->dev, irq, NULL,
+ mt6370_irqs[i].handler, 0,
+ mt6370_irqs[i].name, rdev);
+ if (ret) {
+ dev_err(priv->dev,
+ "Failed to register (%d) interrupt\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int mt6370_regualtor_register(struct mt6370_priv *priv)
+{
+ struct regulator_dev *rdev;
+ struct regulator_config cfg = {};
+ struct device *parent = priv->dev->parent;
+ int i;
+
+ cfg.dev = parent;
+ cfg.driver_data = priv;
+
+ for (i = 0; i < MT6370_MAX_IDX; i++) {
+ rdev = devm_regulator_register(priv->dev,
+ mt6370_regulator_descs + i,
+ &cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(priv->dev,
+ "Failed to register (%d) regulator\n", i);
+ return PTR_ERR(rdev);
+ }
+
+ priv->rdev[i] = rdev;
+ }
+
+ return 0;
+}
+
+static int mt6370_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap) {
+ dev_err(&pdev->dev, "Failed to init regmap\n");
+ return -ENODEV;
+ }
+
+ ret = mt6370_regualtor_register(priv);
+ if (ret)
+ return ret;
+
+ return mt6370_regulator_irq_register(priv);
+}
+
+static const struct platform_device_id mt6370_devid_table[] = {
+ { "mt6370-regulator", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(platform, mt6370_devid_table);
+
+static struct platform_driver mt6370_regulator_driver = {
+ .driver = {
+ .name = "mt6370-regulator",
+ },
+ .id_table = mt6370_devid_table,
+ .probe = mt6370_regulator_probe,
+};
+module_platform_driver(mt6370_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Mediatek MT6370 Regulator Driver");
+MODULE_LICENSE("GPL v2");
};
MODULE_DEVICE_TABLE(platform, mt6380_platform_ids);
-static const struct of_device_id mt6380_of_match[] = {
+static const struct of_device_id __maybe_unused mt6380_of_match[] = {
{ .compatible = "mediatek,mt6380-regulator", },
{ /* sentinel */ },
};
}
suspend_np = of_get_child_by_name(np, regulator_states[i]);
- if (!suspend_np || !suspend_state)
+ if (!suspend_np)
continue;
+ if (!suspend_state) {
+ of_node_put(suspend_np);
+ continue;
+ }
if (!of_property_read_u32(suspend_np, "regulator-mode",
&pval)) {
.is_enabled = rpm_reg_is_enabled,
.list_voltage = regulator_list_voltage_linear_range,
+ .get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
};
static const struct regulator_desc pm8916_pldo = {
.linear_ranges = (struct linear_range[]) {
- REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500),
+ REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500),
},
.n_linear_ranges = 1,
- .n_voltages = 209,
+ .n_voltages = 128,
.ops = &rpm_smps_ldo_ops,
};
{}
};
+static const struct rpm_regulator_data rpm_pm8909_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_hvo_smps, "vdd_s2" },
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l2_l5" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l3_l6_l10" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l7" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_pldo, "vdd_l2_l5" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l3_l6_l10" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l4_l7" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_nldo, "vdd_l3_l6_l10" },
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l8_l11_l15_l18" },
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l13" },
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+ {}
+};
+
static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
+ { .compatible = "qcom,rpm-pm8909-regulators", .data = &rpm_pm8909_regulators },
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f,
SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10,
SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a,
+ SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35,
+ SPMI_REGULATOR_SUBTYPE_HT_P600 = 0x3d,
};
enum spmi_common_regulator_registers {
SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
};
+static struct spmi_voltage_range ht_p150_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000),
+};
+
+static struct spmi_voltage_range ht_p600_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
+};
+
static DEFINE_SPMI_SET_POINTS(pldo);
static DEFINE_SPMI_SET_POINTS(nldo1);
static DEFINE_SPMI_SET_POINTS(nldo2);
static DEFINE_SPMI_SET_POINTS(ht_lvpldo);
static DEFINE_SPMI_SET_POINTS(ht_nldo);
static DEFINE_SPMI_SET_POINTS(hfs430);
+static DEFINE_SPMI_SET_POINTS(ht_p150);
+static DEFINE_SPMI_SET_POINTS(ht_p600);
static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
int len)
static const struct spmi_regulator_mapping supported_regulators[] = {
/* type subtype dig_min dig_max ltype ops setpoints hpm_min */
+ SPMI_VREG(LDO, HT_P600, 0, INF, HFS430, hfs430, ht_p600, 10000),
+ SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000),
SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000),
SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000),
SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000),
{ }
};
+static const struct spmi_regulator_data pmp8074_regulators[] = {
+ { "s1", 0x1400, "vdd_s1"},
+ { "s2", 0x1700, "vdd_s2"},
+ { "s3", 0x1a00, "vdd_s3"},
+ { "s4", 0x1d00, "vdd_s4"},
+ { "s5", 0x2000, "vdd_s5"},
+ { "l1", 0x4000, "vdd_l1_l2"},
+ { "l2", 0x4100, "vdd_l1_l2"},
+ { "l3", 0x4200, "vdd_l3_l8"},
+ { "l4", 0x4300, "vdd_l4"},
+ { "l5", 0x4400, "vdd_l5_l6_l15"},
+ { "l6", 0x4500, "vdd_l5_l6_l15"},
+ { "l7", 0x4600, "vdd_l7"},
+ { "l8", 0x4700, "vdd_l3_l8"},
+ { "l9", 0x4800, "vdd_l9"},
+ /* l10 is currently unsupported HT_P50 */
+ { "l11", 0x4a00, "vdd_l10_l11_l12_l13"},
+ { "l12", 0x4b00, "vdd_l10_l11_l12_l13"},
+ { "l13", 0x4c00, "vdd_l10_l11_l12_l13"},
+ { }
+};
+
static const struct spmi_regulator_data pms405_regulators[] = {
{ "s3", 0x1a00, "vdd_s3"},
{ }
{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
+ { .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators },
{ .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
{ }
};
{
struct attiny_lcd *state = bl_get_data(bl);
struct regmap *regmap = state->regmap;
- int brightness = bl->props.brightness;
+ int brightness = backlight_get_brightness(bl);
int ret, i;
mutex_lock(&state->lock);
- if (bl->props.power != FB_BLANK_UNBLANK ||
- bl->props.fb_blank != FB_BLANK_UNBLANK)
- brightness = 0;
-
for (i = 0; i < 10; i++) {
ret = regmap_write(regmap, REG_PWM, brightness);
if (!ret)
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define RT5120_REG_PGSTAT 0x03
+#define RT5120_REG_CH1VID 0x06
+#define RT5120_REG_CH1SLPVID 0x07
+#define RT5120_REG_ENABLE 0x08
+#define RT5120_REG_MODECTL 0x09
+#define RT5120_REG_UVOVPROT 0x0A
+#define RT5120_REG_SLPCTL 0x0C
+#define RT5120_REG_INTSTAT 0x1E
+#define RT5120_REG_DISCHG 0x1F
+
+#define RT5120_OUTPG_MASK(rid) BIT(rid + 1)
+#define RT5120_OUTUV_MASK(rid) BIT(rid + 9)
+#define RT5120_OUTOV_MASK(rid) BIT(rid + 16)
+#define RT5120_CH1VID_MASK GENMASK(6, 0)
+#define RT5120_RIDEN_MASK(rid) BIT(rid + 1)
+#define RT5120_RADEN_MASK(rid) BIT(rid)
+#define RT5120_FPWM_MASK(rid) BIT(rid + 1)
+#define RT5120_UVHICCUP_MASK BIT(1)
+#define RT5120_OVHICCUP_MASK BIT(0)
+#define RT5120_HOTDIE_MASK BIT(1)
+
+#define RT5120_BUCK1_MINUV 600000
+#define RT5120_BUCK1_MAXUV 1393750
+#define RT5120_BUCK1_STEPUV 6250
+#define RT5120_BUCK1_NUM_VOLT 0x80
+
+#define RT5120_AUTO_MODE 0
+#define RT5120_FPWM_MODE 1
+
+enum {
+ RT5120_REGULATOR_BUCK1 = 0,
+ RT5120_REGULATOR_BUCK2,
+ RT5120_REGULATOR_BUCK3,
+ RT5120_REGULATOR_BUCK4,
+ RT5120_REGULATOR_LDO,
+ RT5120_REGULATOR_EXTEN,
+ RT5120_MAX_REGULATOR
+};
+
+struct rt5120_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_desc rdesc[RT5120_MAX_REGULATOR];
+};
+
+static int rt5120_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int rid = rdev_get_id(rdev);
+ unsigned int mask = RT5120_FPWM_MASK(rid), val;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = 0;
+ break;
+ case REGULATOR_MODE_FAST:
+ val = RT5120_FPWM_MASK(rid);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, RT5120_REG_MODECTL, mask, val);
+}
+
+static unsigned int rt5120_buck_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int ret, rid = rdev_get_id(rdev);
+ unsigned int val;
+
+ ret = regmap_read(regmap, RT5120_REG_MODECTL, &val);
+ if (ret)
+ return REGULATOR_MODE_INVALID;
+
+ if (val & RT5120_FPWM_MASK(rid))
+ return REGULATOR_MODE_FAST;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int rt5120_regulator_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int stat, hd_stat, cur_flags = 0;
+ int rid = rdev_get_id(rdev), ret;
+
+ /*
+ * reg 0x03/0x04/0x05 to indicate PG/UV/OV
+ * use block read to descrease I/O xfer time
+ */
+ ret = regmap_raw_read(regmap, RT5120_REG_PGSTAT, &stat, 3);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, RT5120_REG_INTSTAT, &hd_stat);
+ if (ret)
+ return ret;
+
+ if (!(stat & RT5120_OUTPG_MASK(rid))) {
+ if (stat & RT5120_OUTUV_MASK(rid))
+ cur_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (stat & RT5120_OUTOV_MASK(rid))
+ cur_flags |= REGULATOR_ERROR_REGULATION_OUT;
+ }
+
+ if (hd_stat & RT5120_HOTDIE_MASK)
+ cur_flags |= REGULATOR_ERROR_OVER_TEMP;
+
+ *flags = cur_flags;
+ return 0;
+}
+
+static int rt5120_buck1_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int sel;
+
+ if (uV < RT5120_BUCK1_MINUV || uV > RT5120_BUCK1_MAXUV)
+ return -EINVAL;
+
+ sel = (uV - RT5120_BUCK1_MINUV) / RT5120_BUCK1_STEPUV;
+ return regmap_write(regmap, RT5120_REG_CH1SLPVID, sel);
+}
+
+static int rt5120_regulator_set_suspend_enable(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int rid = rdev_get_id(rdev);
+ unsigned int mask = RT5120_RIDEN_MASK(rid);
+
+ return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, mask);
+}
+
+static int rt5120_regulator_set_suspend_disable(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int rid = rdev_get_id(rdev);
+ unsigned int mask = RT5120_RIDEN_MASK(rid);
+
+ return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, 0);
+}
+
+static const struct regulator_ops rt5120_buck1_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_mode = rt5120_buck_set_mode,
+ .get_mode = rt5120_buck_get_mode,
+ .get_error_flags = rt5120_regulator_get_error_flags,
+ .set_suspend_voltage = rt5120_buck1_set_suspend_voltage,
+ .set_suspend_enable = rt5120_regulator_set_suspend_enable,
+ .set_suspend_disable = rt5120_regulator_set_suspend_disable,
+};
+
+static const struct regulator_ops rt5120_buck234_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_mode = rt5120_buck_set_mode,
+ .get_mode = rt5120_buck_get_mode,
+ .get_error_flags = rt5120_regulator_get_error_flags,
+ .set_suspend_enable = rt5120_regulator_set_suspend_enable,
+ .set_suspend_disable = rt5120_regulator_set_suspend_disable,
+};
+
+static const struct regulator_ops rt5120_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .get_error_flags = rt5120_regulator_get_error_flags,
+ .set_suspend_enable = rt5120_regulator_set_suspend_enable,
+ .set_suspend_disable = rt5120_regulator_set_suspend_disable,
+};
+
+static const struct regulator_ops rt5120_exten_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = rt5120_regulator_set_suspend_enable,
+ .set_suspend_disable = rt5120_regulator_set_suspend_disable,
+};
+
+static unsigned int rt5120_buck_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case RT5120_AUTO_MODE:
+ return REGULATOR_MODE_NORMAL;
+ case RT5120_FPWM_MODE:
+ return REGULATOR_MODE_FAST;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static void rt5120_fillin_regulator_desc(struct regulator_desc *desc, int rid)
+{
+ static const char * const name[] = {
+ "buck1", "buck2", "buck3", "buck4", "ldo", "exten" };
+ static const char * const sname[] = {
+ "vin1", "vin2", "vin3", "vin4", "vinldo", NULL };
+
+ /* Common regulator property */
+ desc->name = name[rid];
+ desc->supply_name = sname[rid];
+ desc->owner = THIS_MODULE;
+ desc->type = REGULATOR_VOLTAGE;
+ desc->id = rid;
+ desc->enable_reg = RT5120_REG_ENABLE;
+ desc->enable_mask = RT5120_RIDEN_MASK(rid);
+ desc->active_discharge_reg = RT5120_REG_DISCHG;
+ desc->active_discharge_mask = RT5120_RADEN_MASK(rid);
+ desc->active_discharge_on = RT5120_RADEN_MASK(rid);
+ /* Config n_voltages to 1 for all*/
+ desc->n_voltages = 1;
+
+ /* Only buck support mode change */
+ if (rid >= RT5120_REGULATOR_BUCK1 && rid <= RT5120_REGULATOR_BUCK4)
+ desc->of_map_mode = rt5120_buck_of_map_mode;
+
+ /* RID specific property init */
+ switch (rid) {
+ case RT5120_REGULATOR_BUCK1:
+ /* Only buck1 support voltage change by I2C */
+ desc->n_voltages = RT5120_BUCK1_NUM_VOLT;
+ desc->min_uV = RT5120_BUCK1_MINUV;
+ desc->uV_step = RT5120_BUCK1_STEPUV;
+ desc->vsel_reg = RT5120_REG_CH1VID,
+ desc->vsel_mask = RT5120_CH1VID_MASK,
+ desc->ops = &rt5120_buck1_ops;
+ break;
+ case RT5120_REGULATOR_BUCK2 ... RT5120_REGULATOR_BUCK4:
+ desc->ops = &rt5120_buck234_ops;
+ break;
+ case RT5120_REGULATOR_LDO:
+ desc->ops = &rt5120_ldo_ops;
+ break;
+ default:
+ desc->ops = &rt5120_exten_ops;
+ }
+}
+
+static int rt5120_of_parse_cb(struct rt5120_priv *priv, int rid,
+ struct of_regulator_match *match)
+{
+ struct regulator_desc *desc = priv->rdesc + rid;
+ struct regulator_init_data *init_data = match->init_data;
+
+ if (!init_data || rid == RT5120_REGULATOR_BUCK1)
+ return 0;
+
+ if (init_data->constraints.min_uV != init_data->constraints.max_uV) {
+ dev_err(priv->dev, "Variable voltage for fixed regulator\n");
+ return -EINVAL;
+ }
+
+ desc->fixed_uV = init_data->constraints.min_uV;
+ return 0;
+}
+
+static struct of_regulator_match rt5120_regu_match[RT5120_MAX_REGULATOR] = {
+ [RT5120_REGULATOR_BUCK1] = { .name = "buck1", },
+ [RT5120_REGULATOR_BUCK2] = { .name = "buck2", },
+ [RT5120_REGULATOR_BUCK3] = { .name = "buck3", },
+ [RT5120_REGULATOR_BUCK4] = { .name = "buck4", },
+ [RT5120_REGULATOR_LDO] = { .name = "ldo", },
+ [RT5120_REGULATOR_EXTEN] = { .name = "exten", }
+};
+
+static int rt5120_parse_regulator_dt_data(struct rt5120_priv *priv)
+{
+ struct device *dev = priv->dev->parent;
+ struct device_node *reg_node;
+ int i, ret;
+
+ for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
+ rt5120_fillin_regulator_desc(priv->rdesc + i, i);
+
+ rt5120_regu_match[i].desc = priv->rdesc + i;
+ }
+
+ reg_node = of_get_child_by_name(dev->of_node, "regulators");
+ if (!reg_node) {
+ dev_err(priv->dev, "Couldn't find 'regulators' node\n");
+ return -ENODEV;
+ }
+
+ ret = of_regulator_match(priv->dev, reg_node, rt5120_regu_match,
+ ARRAY_SIZE(rt5120_regu_match));
+
+ of_node_put(reg_node);
+
+ if (ret < 0) {
+ dev_err(priv->dev,
+ "Error parsing regulator init data (%d)\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
+ ret = rt5120_of_parse_cb(priv, i, rt5120_regu_match + i);
+ if (ret) {
+ dev_err(priv->dev, "Failed in [%d] of_passe_cb\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rt5120_device_property_init(struct rt5120_priv *priv)
+{
+ struct device *dev = priv->dev->parent;
+ struct device_node *np = dev->of_node;
+ bool prot_enable;
+ unsigned int prot_enable_val = 0;
+
+ /* Assign UV/OV HW protection behavior */
+ prot_enable = of_property_read_bool(np,
+ "richtek,enable-undervolt-hiccup");
+ if (prot_enable)
+ prot_enable_val |= RT5120_UVHICCUP_MASK;
+
+ prot_enable = of_property_read_bool(np,
+ "richtek,enable-overvolt-hiccup");
+ if (prot_enable)
+ prot_enable_val |= RT5120_OVHICCUP_MASK;
+
+ return regmap_update_bits(priv->regmap, RT5120_REG_UVOVPROT,
+ RT5120_UVHICCUP_MASK | RT5120_OVHICCUP_MASK,
+ prot_enable_val);
+}
+
+static int rt5120_regulator_probe(struct platform_device *pdev)
+{
+ struct rt5120_priv *priv;
+ struct regulator_dev *rdev;
+ struct regulator_config config = {};
+ int i, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap) {
+ dev_err(&pdev->dev, "Failed to init regmap\n");
+ return -ENODEV;
+ }
+
+ ret = rt5120_device_property_init(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to do property init\n");
+ return ret;
+ }
+
+ ret = rt5120_parse_regulator_dt_data(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to parse dt data\n");
+ return ret;
+ }
+
+ config.dev = &pdev->dev;
+ config.regmap = priv->regmap;
+
+ for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
+ config.of_node = rt5120_regu_match[i].of_node;
+ config.init_data = rt5120_regu_match[i].init_data;
+
+ rdev = devm_regulator_register(&pdev->dev, priv->rdesc + i,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "Failed to register regulator [%d]\n", i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id rt5120_regulator_dev_table[] = {
+ { "rt5120-regulator", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, rt5120_regulator_dev_table);
+
+static struct platform_driver rt5120_regulator_driver = {
+ .driver = {
+ .name = "rt5120-regulator",
+ },
+ .id_table = rt5120_regulator_dev_table,
+ .probe = rt5120_regulator_probe,
+};
+module_platform_driver(rt5120_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT5120 regulator driver");
+MODULE_LICENSE("GPL v2");
bool latchup_enable;
unsigned int mask = RT5190A_RID_BITMASK(rid), val;
+ if (!init_data)
+ return 0;
+
switch (rid) {
case RT5190A_IDX_BUCK1:
case RT5190A_IDX_BUCK4:
* plausible SCMI Voltage Domain number, all belonging to this SCMI
* platform instance node (handle->dev->of_node).
*/
+ of_node_get(handle->dev->of_node);
np = of_find_node_by_name(handle->dev->of_node, "regulators");
for_each_child_of_node(np, child) {
ret = process_scmi_regulator_of_node(sdev, ph, child, rinfo);
*
* Return: 0 on success or appropriate error value when fails
*/
-static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
+static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
{
const struct regulator_desc *desc = rdev->desc;
struct ti_abb *abb = rdev_get_drvdata(rdev);
info = &abb->info[sel];
/*
- * When Linux kernel is starting up, we are'nt sure of the
+ * When Linux kernel is starting up, we aren't sure of the
* Bias configuration that bootloader has configured.
* So, we get to know the actual setting the first time
* we are asked to transition.
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+config RESET_SUNPLUS
+ bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
+ default ARCH_SUNPLUS
+ help
+ This enables the reset driver support for Sunplus SoCs.
+ The reset lines that can be asserted and deasserted by toggling bits
+ in a contiguous, exclusive register space. The register is HIWORD_MASKED,
+ which means each register holds 16 reset lines.
+
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
/* NPCM7xx GCR registers */
#define NPCM_MDLR_OFFSET 0x7C
-#define NPCM_MDLR_USBD0 BIT(9)
-#define NPCM_MDLR_USBD1 BIT(8)
-#define NPCM_MDLR_USBD2_4 BIT(21)
-#define NPCM_MDLR_USBD5_9 BIT(22)
+#define NPCM7XX_MDLR_USBD0 BIT(9)
+#define NPCM7XX_MDLR_USBD1 BIT(8)
+#define NPCM7XX_MDLR_USBD2_4 BIT(21)
+#define NPCM7XX_MDLR_USBD5_9 BIT(22)
+
+/* NPCM8xx MDLR bits */
+#define NPCM8XX_MDLR_USBD0_3 BIT(9)
+#define NPCM8XX_MDLR_USBD4_7 BIT(22)
+#define NPCM8XX_MDLR_USBD8 BIT(24)
+#define NPCM8XX_MDLR_USBD9 BIT(21)
#define NPCM_USB1PHYCTL_OFFSET 0x140
#define NPCM_USB2PHYCTL_OFFSET 0x144
+#define NPCM_USB3PHYCTL_OFFSET 0x148
#define NPCM_USBXPHYCTL_RS BIT(28)
/* NPCM7xx Reset registers */
#define NPCM_IPSRST3_USBPHY1 BIT(24)
#define NPCM_IPSRST3_USBPHY2 BIT(25)
+#define NPCM_IPSRST4 0x74
+#define NPCM_IPSRST4_USBPHY3 BIT(25)
+#define NPCM_IPSRST4_USB_HOST2 BIT(31)
+
#define NPCM_RC_RESETS_PER_REG 32
#define NPCM_MASK_RESETS GENMASK(4, 0)
+enum {
+ BMC_NPCM7XX = 0,
+ BMC_NPCM8XX,
+};
+
+static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3};
+static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3,
+ NPCM_IPSRST4};
+
+struct npcm_reset_info {
+ u32 bmc_id;
+ u32 num_ipsrst;
+ const u32 *ipsrst;
+};
+
+static const struct npcm_reset_info npxm7xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}};
+static const struct npcm_reset_info npxm8xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}};
+
struct npcm_rc_data {
struct reset_controller_dev rcdev;
struct notifier_block restart_nb;
+ const struct npcm_reset_info *info;
+ struct regmap *gcr_regmap;
u32 sw_reset_number;
void __iomem *base;
spinlock_t lock;
static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
+ struct npcm_rc_data *rc = to_rc_data(rcdev);
unsigned int offset, bit;
+ bool offset_found = false;
+ int off_num;
offset = reset_spec->args[0];
- if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
- offset != NPCM_IPSRST3) {
+ for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) {
+ if (offset == rc->info->ipsrst[off_num]) {
+ offset_found = true;
+ break;
+ }
+ }
+
+ if (!offset_found) {
dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
return -EINVAL;
}
+
bit = reset_spec->args[1];
if (bit >= NPCM_RC_RESETS_PER_REG) {
dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
}
static const struct of_device_id npcm_rc_match[] = {
- { .compatible = "nuvoton,npcm750-reset",
- .data = (void *)"nuvoton,npcm750-gcr" },
+ { .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info},
+ { .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info},
{ }
};
-/*
- * The following procedure should be observed in USB PHY, USB device and
- * USB host initialization at BMC boot
- */
-static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc)
{
u32 mdlr, iprst1, iprst2, iprst3;
- struct device *dev = &pdev->dev;
- struct regmap *gcr_regmap;
u32 ipsrst1_bits = 0;
u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
u32 ipsrst3_bits = 0;
- const char *gcr_dt;
-
- gcr_dt = (const char *)
- of_match_device(dev->driver->of_match_table, dev)->data;
-
- gcr_regmap = syscon_regmap_lookup_by_compatible(gcr_dt);
- if (IS_ERR(gcr_regmap)) {
- dev_err(&pdev->dev, "Failed to find %s\n", gcr_dt);
- return PTR_ERR(gcr_regmap);
- }
/* checking which USB device is enabled */
- regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
- if (!(mdlr & NPCM_MDLR_USBD0))
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM7XX_MDLR_USBD0))
ipsrst3_bits |= NPCM_IPSRST3_USBD0;
- if (!(mdlr & NPCM_MDLR_USBD1))
+ if (!(mdlr & NPCM7XX_MDLR_USBD1))
ipsrst1_bits |= NPCM_IPSRST1_USBD1;
- if (!(mdlr & NPCM_MDLR_USBD2_4))
+ if (!(mdlr & NPCM7XX_MDLR_USBD2_4))
ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
NPCM_IPSRST1_USBD3 |
NPCM_IPSRST1_USBD4);
- if (!(mdlr & NPCM_MDLR_USBD0)) {
+ if (!(mdlr & NPCM7XX_MDLR_USBD0)) {
ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
NPCM_IPSRST1_USBD6);
ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
writel(iprst3, rc->base + NPCM_IPSRST3);
/* clear USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
/* deassert reset USB PHY */
udelay(50);
/* set USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+
+ /* deassert reset USB devices*/
+ iprst1 &= ~ipsrst1_bits;
+ iprst2 &= ~ipsrst2_bits;
+ iprst3 &= ~ipsrst3_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+}
+
+static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc)
+{
+ u32 mdlr, iprst1, iprst2, iprst3, iprst4;
+ u32 ipsrst1_bits = 0;
+ u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
+ u32 ipsrst3_bits = 0;
+ u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3;
+
+ /* checking which USB device is enabled */
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) {
+ ipsrst3_bits |= NPCM_IPSRST3_USBD0;
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD1 |
+ NPCM_IPSRST1_USBD2 |
+ NPCM_IPSRST1_USBD3);
+ }
+ if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) {
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD4 |
+ NPCM_IPSRST1_USBD5 |
+ NPCM_IPSRST1_USBD6);
+ ipsrst3_bits |= NPCM_IPSRST3_USBD7;
+ }
+
+ if (!(mdlr & NPCM8XX_MDLR_USBD8))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD8;
+ if (!(mdlr & NPCM8XX_MDLR_USBD9))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD9;
+
+ /* assert reset USB PHY and USB devices */
+ iprst1 = readl(rc->base + NPCM_IPSRST1);
+ iprst2 = readl(rc->base + NPCM_IPSRST2);
+ iprst3 = readl(rc->base + NPCM_IPSRST3);
+ iprst4 = readl(rc->base + NPCM_IPSRST4);
+
+ iprst1 |= ipsrst1_bits;
+ iprst2 |= ipsrst2_bits;
+ iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
+ NPCM_IPSRST3_USBPHY2);
+ iprst2 |= ipsrst4_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* clear USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+
+ /* deassert reset USB PHY */
+ iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ iprst4 &= ~NPCM_IPSRST4_USBPHY3;
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* set USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
/* deassert reset USB devices*/
iprst1 &= ~ipsrst1_bits;
iprst2 &= ~ipsrst2_bits;
iprst3 &= ~ipsrst3_bits;
+ iprst4 &= ~ipsrst4_bits;
writel(iprst1, rc->base + NPCM_IPSRST1);
writel(iprst2, rc->base + NPCM_IPSRST2);
writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+}
+
+/*
+ * The following procedure should be observed in USB PHY, USB device and
+ * USB host initialization at BMC boot
+ */
+static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+{
+ struct device *dev = &pdev->dev;
+
+ rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
+ dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
+ rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
+ return PTR_ERR(rc->gcr_regmap);
+ }
+ }
+
+ rc->info = (const struct npcm_reset_info *)
+ of_match_device(dev->driver->of_match_table, dev)->data;
+ switch (rc->info->bmc_id) {
+ case BMC_NPCM7XX:
+ npcm_usb_reset_npcm7xx(rc);
+ break;
+ case BMC_NPCM8XX:
+ npcm_usb_reset_npcm8xx(rc);
+ break;
+ default:
+ return -ENODEV;
+ }
return 0;
}
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * SP7021 reset driver
+ *
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reboot.h>
+
+/* HIWORD_MASK_REG BITS */
+#define BITS_PER_HWM_REG 16
+
+/* resets HW info: reg_index_shift */
+static const u32 sp_resets[] = {
+/* SP7021: mo_reset0 ~ mo_reset9 */
+ 0x00,
+ 0x02,
+ 0x03,
+ 0x04,
+ 0x05,
+ 0x06,
+ 0x07,
+ 0x08,
+ 0x09,
+ 0x0a,
+ 0x0b,
+ 0x0d,
+ 0x0e,
+ 0x0f,
+ 0x10,
+ 0x12,
+ 0x14,
+ 0x15,
+ 0x16,
+ 0x17,
+ 0x18,
+ 0x19,
+ 0x1a,
+ 0x1b,
+ 0x1c,
+ 0x1d,
+ 0x1e,
+ 0x1f,
+ 0x20,
+ 0x21,
+ 0x22,
+ 0x23,
+ 0x24,
+ 0x25,
+ 0x26,
+ 0x2a,
+ 0x2b,
+ 0x2d,
+ 0x2e,
+ 0x30,
+ 0x31,
+ 0x32,
+ 0x33,
+ 0x3d,
+ 0x3e,
+ 0x3f,
+ 0x42,
+ 0x44,
+ 0x4b,
+ 0x4c,
+ 0x4d,
+ 0x4e,
+ 0x4f,
+ 0x50,
+ 0x55,
+ 0x60,
+ 0x61,
+ 0x6a,
+ 0x6f,
+ 0x70,
+ 0x73,
+ 0x74,
+ 0x86,
+ 0x8a,
+ 0x8b,
+ 0x8d,
+ 0x8e,
+ 0x8f,
+ 0x90,
+ 0x92,
+ 0x93,
+ 0x94,
+ 0x95,
+ 0x96,
+ 0x97,
+ 0x98,
+ 0x99,
+};
+
+struct sp_reset {
+ struct reset_controller_dev rcdev;
+ struct notifier_block notifier;
+ void __iomem *base;
+};
+
+static inline struct sp_reset *to_sp_reset(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct sp_reset, rcdev);
+}
+
+static int sp_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct sp_reset *reset = to_sp_reset(rcdev);
+ int index = sp_resets[id] / BITS_PER_HWM_REG;
+ int shift = sp_resets[id] % BITS_PER_HWM_REG;
+ u32 val;
+
+ val = (1 << (16 + shift)) | (assert << shift);
+ writel(val, reset->base + (index * 4));
+
+ return 0;
+}
+
+static int sp_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return sp_reset_update(rcdev, id, true);
+}
+
+static int sp_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return sp_reset_update(rcdev, id, false);
+}
+
+static int sp_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sp_reset *reset = to_sp_reset(rcdev);
+ int index = sp_resets[id] / BITS_PER_HWM_REG;
+ int shift = sp_resets[id] % BITS_PER_HWM_REG;
+ u32 reg;
+
+ reg = readl(reset->base + (index * 4));
+
+ return !!(reg & BIT(shift));
+}
+
+static const struct reset_control_ops sp_reset_ops = {
+ .assert = sp_reset_assert,
+ .deassert = sp_reset_deassert,
+ .status = sp_reset_status,
+};
+
+static int sp_restart(struct notifier_block *nb, unsigned long mode,
+ void *cmd)
+{
+ struct sp_reset *reset = container_of(nb, struct sp_reset, notifier);
+
+ sp_reset_assert(&reset->rcdev, 0);
+ sp_reset_deassert(&reset->rcdev, 0);
+
+ return NOTIFY_DONE;
+}
+
+static int sp_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sp_reset *reset;
+ struct resource *res;
+ int ret;
+
+ reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL);
+ if (!reset)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reset->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reset->base))
+ return PTR_ERR(reset->base);
+
+ reset->rcdev.ops = &sp_reset_ops;
+ reset->rcdev.owner = THIS_MODULE;
+ reset->rcdev.of_node = dev->of_node;
+ reset->rcdev.nr_resets = resource_size(res) / 4 * BITS_PER_HWM_REG;
+
+ ret = devm_reset_controller_register(dev, &reset->rcdev);
+ if (ret)
+ return ret;
+
+ reset->notifier.notifier_call = sp_restart;
+ reset->notifier.priority = 192;
+
+ return register_restart_handler(&reset->notifier);
+}
+
+static const struct of_device_id sp_reset_dt_ids[] = {
+ {.compatible = "sunplus,sp7021-reset",},
+ { /* sentinel */ },
+};
+
+static struct platform_driver sp_reset_driver = {
+ .probe = sp_reset_probe,
+ .driver = {
+ .name = "sunplus-reset",
+ .of_match_table = sp_reset_dt_ids,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(sp_reset_driver);
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
_scsih_ir_shutdown(ioc);
_scsih_nvme_shutdown(ioc);
mpt3sas_base_mask_interrupts(ioc);
+ mpt3sas_base_stop_watchdog(ioc);
ioc->shost_recovery = 1;
mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
ioc->shost_recovery = 0;
goto out_put_request;
ret = 0;
- if (hdr->iovec_count) {
+ if (hdr->iovec_count && hdr->dxfer_len) {
struct iov_iter i;
struct iovec *iov = NULL;
if (!cpumask_intersects(cpumask, cpu_online_mask))
return -1;
- cpumask_copy(irq_data_get_affinity_mask(data), cpumask);
+ irq_data_update_affinity(data, cpumask);
return IRQ_SET_MASK_OK_NOCOPY;
}
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/canaan/Kconfig"
source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/fujitsu/Kconfig"
source "drivers/soc/imx/Kconfig"
source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/litex/Kconfig"
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
+obj-y += fujitsu/
obj-$(CONFIG_ARCH_GEMINI) += gemini/
obj-y += imx/
obj-y += ixp4xx/
np = of_find_matching_node(NULL, meson_mx_socinfo_analog_top_ids);
if (np) {
analog_top_regmap = syscon_node_to_regmap(np);
+ of_node_put(np);
if (IS_ERR(analog_top_regmap))
return PTR_ERR(analog_top_regmap);
}
pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
- if (!pwrc)
+ if (!pwrc) {
+ of_node_put(sm_np);
return -ENOMEM;
+ }
pwrc->fw = meson_sm_get(sm_np);
of_node_put(sm_np);
#define ASB_AXI_BRDG_ID 0x20
-#define ASB_READ(reg) readl(power->asb + (reg))
-#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
+#define BCM2835_BRDG_ID 0x62726467
struct bcm2835_power_domain {
struct generic_pm_domain base;
void __iomem *base;
/* AXI Async bridge registers. */
void __iomem *asb;
+ /* RPiVid bridge registers. */
+ void __iomem *rpivid_asb;
struct genpd_onecell_data pd_xlate;
struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
struct reset_controller_dev reset;
};
-static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
{
+ void __iomem *base = power->asb;
u64 start;
+ u32 val;
- if (!reg)
+ switch (reg) {
+ case 0:
return 0;
+ case ASB_V3D_S_CTRL:
+ case ASB_V3D_M_CTRL:
+ if (power->rpivid_asb)
+ base = power->rpivid_asb;
+ break;
+ }
start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
- ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
- while (ASB_READ(reg) & ASB_ACK) {
+ if (enable) {
+ val = readl(base + reg) & ~ASB_REQ_STOP;
+ } else {
+ val = readl(base + reg) | ASB_REQ_STOP;
+ }
+ writel(PM_PASSWORD | val, base + reg);
+
+ while (readl(base + reg) & ASB_ACK) {
cpu_relax();
if (ktime_get_ns() - start >= 1000)
return -ETIMEDOUT;
return 0;
}
-static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
{
- u64 start;
-
- if (!reg)
- return 0;
-
- start = ktime_get_ns();
-
- /* Enable the module's async AXI bridges. */
- ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
- while (!(ASB_READ(reg) & ASB_ACK)) {
- cpu_relax();
- if (ktime_get_ns() - start >= 1000)
- return -ETIMEDOUT;
- }
+ return bcm2835_asb_control(power, reg, true);
+}
- return 0;
+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+{
+ return bcm2835_asb_control(power, reg, false);
}
static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
{
struct bcm2835_power *power = pd->power;
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
/* Enable functional isolation */
PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
int inrush;
bool powok;
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
/* If it was already powered on by the fw, leave it that way. */
if (PM_READ(pm_reg) & PM_POWUP)
return 0;
power->dev = dev;
power->base = pm->base;
power->asb = pm->asb;
+ power->rpivid_asb = pm->rpivid_asb;
- id = ASB_READ(ASB_AXI_BRDG_ID);
- if (id != 0x62726467 /* "BRDG" */) {
+ id = readl(power->asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
dev_err(dev, "ASB register ID returned 0x%08x\n", id);
return -ENODEV;
}
+ if (power->rpivid_asb) {
+ id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+ dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+ id);
+ return -ENODEV;
+ }
+ }
+
power->pd_xlate.domains = devm_kcalloc(dev,
ARRAY_SIZE(power_domain_names),
sizeof(*power->pd_xlate.domains),
ret = setup_hifcpubiuctrl_regs(np);
if (ret)
- return ret;
+ goto out_put;
ret = mcp_write_pairing_set();
if (ret) {
pr_err("MCP: Unable to disable write pairing!\n");
- return ret;
+ goto out_put;
}
a72_b53_rac_enable_all(np);
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
#endif
- return 0;
+ ret = 0;
+out_put:
+ of_node_put(np);
+ return ret;
}
early_initcall(brcmstb_biuctrl_init);
ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs;
ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs;
/*
- * Slightly grosss to use the phy ver to get a memc,
+ * Slightly gross to use the phy ver to get a memc,
* offset but that is the only versioned things so far
* we can test for.
*/
#include <linux/platform_device.h>
#include <linux/fsl/guts.h>
-struct guts {
- struct ccsr_guts __iomem *regs;
- bool little_endian;
-};
-
struct fsl_soc_die_attr {
char *die;
u32 svr;
u32 mask;
};
-static struct guts *guts;
-static struct soc_device_attribute soc_dev_attr;
-static struct soc_device *soc_dev;
-
+struct fsl_soc_data {
+ const char *sfp_compat;
+ u32 uid_offset;
+};
/* SoC die attribute definition for QorIQ platform */
static const struct fsl_soc_die_attr fsl_soc_die[] = {
return NULL;
}
-static u32 fsl_guts_get_svr(void)
-{
- u32 svr = 0;
-
- if (!guts || !guts->regs)
- return svr;
-
- if (guts->little_endian)
- svr = ioread32(&guts->regs->svr);
- else
- svr = ioread32be(&guts->regs->svr);
-
- return svr;
-}
-
-static int fsl_guts_probe(struct platform_device *pdev)
+static u64 fsl_guts_get_soc_uid(const char *compat, unsigned int offset)
{
- struct device_node *root, *np = pdev->dev.of_node;
- struct device *dev = &pdev->dev;
- const struct fsl_soc_die_attr *soc_die;
- const char *machine;
- u32 svr;
-
- /* Initialize guts */
- guts = devm_kzalloc(dev, sizeof(*guts), GFP_KERNEL);
- if (!guts)
- return -ENOMEM;
-
- guts->little_endian = of_property_read_bool(np, "little-endian");
+ struct device_node *np;
+ void __iomem *sfp_base;
+ u64 uid;
- guts->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(guts->regs))
- return PTR_ERR(guts->regs);
+ np = of_find_compatible_node(NULL, NULL, compat);
+ if (!np)
+ return 0;
- /* Register soc device */
- root = of_find_node_by_path("/");
- if (of_property_read_string(root, "model", &machine))
- of_property_read_string_index(root, "compatible", 0, &machine);
- if (machine) {
- soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
- if (!soc_dev_attr.machine) {
- of_node_put(root);
- return -ENOMEM;
- }
+ sfp_base = of_iomap(np, 0);
+ if (!sfp_base) {
+ of_node_put(np);
+ return 0;
}
- of_node_put(root);
- svr = fsl_guts_get_svr();
- soc_die = fsl_soc_die_match(svr, fsl_soc_die);
- if (soc_die) {
- soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
- "QorIQ %s", soc_die->die);
- } else {
- soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL, "QorIQ");
- }
- if (!soc_dev_attr.family)
- return -ENOMEM;
- soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
- "svr:0x%08x", svr);
- if (!soc_dev_attr.soc_id)
- return -ENOMEM;
- soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
- (svr >> 4) & 0xf, svr & 0xf);
- if (!soc_dev_attr.revision)
- return -ENOMEM;
+ uid = ioread32(sfp_base + offset);
+ uid <<= 32;
+ uid |= ioread32(sfp_base + offset + 4);
- soc_dev = soc_device_register(&soc_dev_attr);
- if (IS_ERR(soc_dev))
- return PTR_ERR(soc_dev);
+ iounmap(sfp_base);
+ of_node_put(np);
- pr_info("Machine: %s\n", soc_dev_attr.machine);
- pr_info("SoC family: %s\n", soc_dev_attr.family);
- pr_info("SoC ID: %s, Revision: %s\n",
- soc_dev_attr.soc_id, soc_dev_attr.revision);
- return 0;
+ return uid;
}
-static int fsl_guts_remove(struct platform_device *dev)
-{
- soc_device_unregister(soc_dev);
- return 0;
-}
+static const struct fsl_soc_data ls1028a_data = {
+ .sfp_compat = "fsl,ls1028a-sfp",
+ .uid_offset = 0x21c,
+};
/*
* Table for matching compatible strings, for device tree
{ .compatible = "fsl,ls1012a-dcfg", },
{ .compatible = "fsl,ls1046a-dcfg", },
{ .compatible = "fsl,lx2160a-dcfg", },
- { .compatible = "fsl,ls1028a-dcfg", },
+ { .compatible = "fsl,ls1028a-dcfg", .data = &ls1028a_data},
{}
};
-MODULE_DEVICE_TABLE(of, fsl_guts_of_match);
-
-static struct platform_driver fsl_guts_driver = {
- .driver = {
- .name = "fsl-guts",
- .of_match_table = fsl_guts_of_match,
- },
- .probe = fsl_guts_probe,
- .remove = fsl_guts_remove,
-};
static int __init fsl_guts_init(void)
{
- return platform_driver_register(&fsl_guts_driver);
-}
-core_initcall(fsl_guts_init);
+ struct soc_device_attribute *soc_dev_attr;
+ static struct soc_device *soc_dev;
+ const struct fsl_soc_die_attr *soc_die;
+ const struct fsl_soc_data *soc_data;
+ const struct of_device_id *match;
+ struct ccsr_guts __iomem *regs;
+ const char *machine = NULL;
+ struct device_node *np;
+ bool little_endian;
+ u64 soc_uid = 0;
+ u32 svr;
+ int ret;
-static void __exit fsl_guts_exit(void)
-{
- platform_driver_unregister(&fsl_guts_driver);
+ np = of_find_matching_node_and_match(NULL, fsl_guts_of_match, &match);
+ if (!np)
+ return 0;
+ soc_data = match->data;
+
+ regs = of_iomap(np, 0);
+ if (!regs) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ little_endian = of_property_read_bool(np, "little-endian");
+ if (little_endian)
+ svr = ioread32(®s->svr);
+ else
+ svr = ioread32be(®s->svr);
+ iounmap(regs);
+ of_node_put(np);
+
+ /* Register soc device */
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ if (of_property_read_string(of_root, "model", &machine))
+ of_property_read_string_index(of_root, "compatible", 0, &machine);
+ if (machine) {
+ soc_dev_attr->machine = kstrdup(machine, GFP_KERNEL);
+ if (!soc_dev_attr->machine)
+ goto err_nomem;
+ }
+
+ soc_die = fsl_soc_die_match(svr, fsl_soc_die);
+ if (soc_die) {
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "QorIQ %s",
+ soc_die->die);
+ } else {
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "QorIQ");
+ }
+ if (!soc_dev_attr->family)
+ goto err_nomem;
+
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "svr:0x%08x", svr);
+ if (!soc_dev_attr->soc_id)
+ goto err_nomem;
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+ (svr >> 4) & 0xf, svr & 0xf);
+ if (!soc_dev_attr->revision)
+ goto err_nomem;
+
+ if (soc_data)
+ soc_uid = fsl_guts_get_soc_uid(soc_data->sfp_compat,
+ soc_data->uid_offset);
+ if (soc_uid)
+ soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX",
+ soc_uid);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto err;
+ }
+
+ pr_info("Machine: %s\n", soc_dev_attr->machine);
+ pr_info("SoC family: %s\n", soc_dev_attr->family);
+ pr_info("SoC ID: %s, Revision: %s\n",
+ soc_dev_attr->soc_id, soc_dev_attr->revision);
+
+ return 0;
+
+err_nomem:
+ ret = -ENOMEM;
+err:
+ kfree(soc_dev_attr->machine);
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->serial_number);
+ kfree(soc_dev_attr);
+
+ return ret;
}
-module_exit(fsl_guts_exit);
+core_initcall(fsl_guts_init);
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+menu "fujitsu SoC drivers"
+
+config A64FX_DIAG
+ bool "A64FX diag driver"
+ depends on ARM64
+ depends on ACPI
+ help
+ Say Y here if you want to enable diag interrupt on Fujitsu A64FX.
+ This driver enables BMC's diagnostic requests and enables
+ A64FX-specific interrupts. This allows administrators to obtain
+ kernel dumps via diagnostic requests using ipmitool, etc.
+
+ If unsure, say N.
+
+endmenu
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_A64FX_DIAG) += a64fx-diag.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A64FX diag driver.
+ * Copyright (c) 2022 Fujitsu Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define A64FX_DIAG_IRQ 1
+#define BMC_DIAG_INTERRUPT_ENABLE 0x40
+#define BMC_DIAG_INTERRUPT_STATUS 0x44
+#define BMC_DIAG_INTERRUPT_MASK BIT(31)
+
+struct a64fx_diag_priv {
+ void __iomem *mmsc_reg_base;
+ int irq;
+ bool has_nmi;
+};
+
+static irqreturn_t a64fx_diag_handler_nmi(int irq, void *dev_id)
+{
+ nmi_panic(NULL, "a64fx_diag: interrupt received\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t a64fx_diag_handler_irq(int irq, void *dev_id)
+{
+ panic("a64fx_diag: interrupt received\n");
+
+ return IRQ_HANDLED;
+}
+
+static void a64fx_diag_interrupt_clear(struct a64fx_diag_priv *priv)
+{
+ void __iomem *diag_status_reg_addr;
+ u32 mmsc;
+
+ diag_status_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_STATUS;
+ mmsc = readl(diag_status_reg_addr);
+ if (mmsc & BMC_DIAG_INTERRUPT_MASK)
+ writel(BMC_DIAG_INTERRUPT_MASK, diag_status_reg_addr);
+}
+
+static void a64fx_diag_interrupt_enable(struct a64fx_diag_priv *priv)
+{
+ void __iomem *diag_enable_reg_addr;
+ u32 mmsc;
+
+ diag_enable_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_ENABLE;
+ mmsc = readl(diag_enable_reg_addr);
+ if (!(mmsc & BMC_DIAG_INTERRUPT_MASK)) {
+ mmsc |= BMC_DIAG_INTERRUPT_MASK;
+ writel(mmsc, diag_enable_reg_addr);
+ }
+}
+
+static void a64fx_diag_interrupt_disable(struct a64fx_diag_priv *priv)
+{
+ void __iomem *diag_enable_reg_addr;
+ u32 mmsc;
+
+ diag_enable_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_ENABLE;
+ mmsc = readl(diag_enable_reg_addr);
+ if (mmsc & BMC_DIAG_INTERRUPT_MASK) {
+ mmsc &= ~BMC_DIAG_INTERRUPT_MASK;
+ writel(mmsc, diag_enable_reg_addr);
+ }
+}
+
+static int a64fx_diag_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct a64fx_diag_priv *priv;
+ unsigned long irq_flags;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ priv->mmsc_reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->mmsc_reg_base))
+ return PTR_ERR(priv->mmsc_reg_base);
+
+ priv->irq = platform_get_irq(pdev, A64FX_DIAG_IRQ);
+ if (priv->irq < 0)
+ return priv->irq;
+
+ platform_set_drvdata(pdev, priv);
+
+ irq_flags = IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_AUTOEN |
+ IRQF_NO_THREAD;
+ ret = request_nmi(priv->irq, &a64fx_diag_handler_nmi, irq_flags,
+ "a64fx_diag_nmi", NULL);
+ if (ret) {
+ ret = request_irq(priv->irq, &a64fx_diag_handler_irq,
+ irq_flags, "a64fx_diag_irq", NULL);
+ if (ret) {
+ dev_err(dev, "cannot register IRQ %d\n", ret);
+ return ret;
+ }
+ enable_irq(priv->irq);
+ } else {
+ enable_nmi(priv->irq);
+ priv->has_nmi = true;
+ }
+
+ a64fx_diag_interrupt_clear(priv);
+ a64fx_diag_interrupt_enable(priv);
+
+ return 0;
+}
+
+static int a64fx_diag_remove(struct platform_device *pdev)
+{
+ struct a64fx_diag_priv *priv = platform_get_drvdata(pdev);
+
+ a64fx_diag_interrupt_disable(priv);
+ a64fx_diag_interrupt_clear(priv);
+
+ if (priv->has_nmi)
+ free_nmi(priv->irq, NULL);
+ else
+ free_irq(priv->irq, NULL);
+
+ return 0;
+}
+
+static const struct acpi_device_id a64fx_diag_acpi_match[] = {
+ { "FUJI2007", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, a64fx_diag_acpi_match);
+
+
+static struct platform_driver a64fx_diag_driver = {
+ .driver = {
+ .name = "a64fx_diag_driver",
+ .acpi_match_table = ACPI_PTR(a64fx_diag_acpi_match),
+ },
+ .probe = a64fx_diag_probe,
+ .remove = a64fx_diag_remove,
+};
+
+module_platform_driver(a64fx_diag_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>");
+MODULE_DESCRIPTION("A64FX diag driver");
if (!IS_ERR(domain->regulator)) {
ret = regulator_enable(domain->regulator);
if (ret) {
- dev_err(domain->dev, "failed to enable regulator\n");
+ dev_err(domain->dev,
+ "failed to enable regulator: %pe\n",
+ ERR_PTR(ret));
goto out_put_pm;
}
}
if (!IS_ERR(domain->regulator)) {
ret = regulator_disable(domain->regulator);
if (ret) {
- dev_err(domain->dev, "failed to disable regulator\n");
+ dev_err(domain->dev,
+ "failed to disable regulator: %pe\n",
+ ERR_PTR(ret));
return ret;
}
}
bc->bus_power_dev = genpd_dev_pm_attach_by_name(dev, "bus");
if (IS_ERR(bc->bus_power_dev))
return dev_err_probe(dev, PTR_ERR(bc->bus_power_dev),
- "failed to attach power domain\n");
+ "failed to attach power domain \"bus\"\n");
for (i = 0; i < bc_data->num_domains; i++) {
const struct imx8m_blk_ctrl_domain_data *data = &bc_data->domains[i];
dev_pm_domain_attach_by_name(dev, data->gpc_name);
if (IS_ERR(domain->power_dev)) {
dev_err_probe(dev, PTR_ERR(domain->power_dev),
- "failed to attach power domain\n");
+ "failed to attach power domain \"%s\"\n",
+ data->gpc_name);
ret = PTR_ERR(domain->power_dev);
goto cleanup_pds;
}
ret = pm_genpd_init(&domain->genpd, NULL, true);
if (ret) {
- dev_err_probe(dev, ret, "failed to init power domain\n");
+ dev_err_probe(dev, ret,
+ "failed to init power domain \"%s\"\n",
+ data->gpc_name);
dev_pm_domain_detach(domain->power_dev, true);
goto cleanup_pds;
}
Say yes here to add support for the MediaTek Multimedia
Subsystem (MMSYS).
+config MTK_SVS
+ tristate "MediaTek Smart Voltage Scaling(SVS)"
+ depends on MTK_EFUSE && NVMEM
+ help
+ The Smart Voltage Scaling(SVS) engine is a piece of hardware
+ which has several controllers(banks) for calculating suitable
+ voltage to different power domains(CPU/GPU/CCI) according to
+ chip process corner, temperatures and other factors. Then DVFS
+ driver could apply SVS bank voltage to PMIC/Buck.
+
endmenu
obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mutex.o
+obj-$(CONFIG_MTK_SVS) += mtk-svs.o
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT6795_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT6795_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mt6795-power.h>
+
+/*
+ * MT6795 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt6795[] = {
+ [MT6795_POWER_DOMAIN_VDEC] = {
+ .name = "vdec",
+ .sta_mask = PWR_STATUS_VDEC,
+ .ctl_offs = SPM_VDE_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT6795_POWER_DOMAIN_VENC] = {
+ .name = "venc",
+ .sta_mask = PWR_STATUS_VENC,
+ .ctl_offs = SPM_VEN_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT6795_POWER_DOMAIN_ISP] = {
+ .name = "isp",
+ .sta_mask = PWR_STATUS_ISP,
+ .ctl_offs = SPM_ISP_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ },
+ [MT6795_POWER_DOMAIN_MM] = {
+ .name = "mm",
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = SPM_DIS_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_TOPAXI(MT8173_TOP_AXI_PROT_EN_MM_M0 |
+ MT8173_TOP_AXI_PROT_EN_MM_M1),
+ },
+ },
+ [MT6795_POWER_DOMAIN_MJC] = {
+ .name = "mjc",
+ .sta_mask = BIT(20),
+ .ctl_offs = 0x298,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT6795_POWER_DOMAIN_AUDIO] = {
+ .name = "audio",
+ .sta_mask = PWR_STATUS_AUDIO,
+ .ctl_offs = SPM_AUDIO_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT6795_POWER_DOMAIN_MFG_ASYNC] = {
+ .name = "mfg_async",
+ .sta_mask = PWR_STATUS_MFG_ASYNC,
+ .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = 0,
+ },
+ [MT6795_POWER_DOMAIN_MFG_2D] = {
+ .name = "mfg_2d",
+ .sta_mask = PWR_STATUS_MFG_2D,
+ .ctl_offs = SPM_MFG_2D_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ },
+ [MT6795_POWER_DOMAIN_MFG] = {
+ .name = "mfg",
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = SPM_MFG_PWR_CON,
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+ .sram_pdn_bits = GENMASK(13, 8),
+ .sram_pdn_ack_bits = GENMASK(21, 16),
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_TOPAXI(MT8173_TOP_AXI_PROT_EN_MFG_S |
+ MT8173_TOP_AXI_PROT_EN_MFG_M0 |
+ MT8173_TOP_AXI_PROT_EN_MFG_M1 |
+ MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT),
+ },
+ },
+};
+
+static const struct scpsys_soc_data mt6795_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt6795,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt6795),
+};
+
+#endif /* __SOC_MEDIATEK_MT6795_PM_DOMAINS_H */
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = 0,
.sram_pdn_ack_bits = 0,
+ .caps = MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8183_POWER_DOMAIN_MFG] = {
.name = "mfg",
MT8186_TOP_AXI_PROT_EN_1_CLR,
MT8186_TOP_AXI_PROT_EN_1_STA),
},
- .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8186_POWER_DOMAIN_MFG2] = {
.name = "mfg2",
.pwr_sta2nd_offs = 0x0170,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
+ .caps = MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8192_POWER_DOMAIN_MFG1] = {
.name = "mfg1",
MT8192_TOP_AXI_PROT_EN_2_CLR,
MT8192_TOP_AXI_PROT_EN_2_STA1),
},
+ .caps = MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8192_POWER_DOMAIN_MFG2] = {
.name = "mfg2",
.ctl_offs = 0x334,
.pwr_sta_offs = 0x174,
.pwr_sta2nd_offs = 0x178,
- .caps = MTK_SCPD_ACTIVE_WAKEUP,
+ .caps = MTK_SCPD_ACTIVE_WAKEUP | MTK_SCPD_ALWAYS_ON,
},
[MT8195_POWER_DOMAIN_CSI_RX_TOP] = {
.name = "csi_rx_top",
MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR,
MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA1),
},
- .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8195_POWER_DOMAIN_MFG2] = {
.name = "mfg2",
#define MT8365_DISP_REG_CONFIG_DISP_RDMA0_RSZ0_SEL_IN 0xf60
#define MT8365_DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0xf64
#define MT8365_DISP_REG_CONFIG_DISP_DSI0_SEL_IN 0xf68
+#define MT8365_DISP_REG_CONFIG_DISP_RDMA1_SOUT_SEL 0xfd0
+#define MT8365_DISP_REG_CONFIG_DISP_DPI0_SEL_IN 0xfd8
+#define MT8365_DISP_REG_CONFIG_DISP_LVDS_SYS_CFG_00 0xfdc
#define MT8365_RDMA0_SOUT_COLOR0 0x1
#define MT8365_DITHER_MOUT_EN_DSI0 0x1
#define MT8365_RDMA0_RSZ0_SEL_IN_RDMA0 0x0
#define MT8365_DISP_COLOR_SEL_IN_COLOR0 0x0
#define MT8365_OVL0_MOUT_PATH0_SEL BIT(0)
+#define MT8365_RDMA1_SOUT_DPI0 0x1
+#define MT8365_DPI0_SEL_IN_RDMA1 0x0
+#define MT8365_LVDS_SYS_CFG_00_SEL_LVDS_PXL_CLK 0x1
+#define MT8365_DPI0_SEL_IN_RDMA1 0x0
static const struct mtk_mmsys_routes mt8365_mmsys_routing_table[] = {
{
MT8365_DISP_REG_CONFIG_DISP_RDMA0_RSZ0_SEL_IN,
MT8365_RDMA0_RSZ0_SEL_IN_RDMA0, MT8365_RDMA0_RSZ0_SEL_IN_RDMA0
},
+ {
+ DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
+ MT8365_DISP_REG_CONFIG_DISP_LVDS_SYS_CFG_00,
+ MT8365_LVDS_SYS_CFG_00_SEL_LVDS_PXL_CLK, MT8365_LVDS_SYS_CFG_00_SEL_LVDS_PXL_CLK
+ },
+ {
+ DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
+ MT8365_DISP_REG_CONFIG_DISP_DPI0_SEL_IN,
+ MT8365_DPI0_SEL_IN_RDMA1, MT8365_DPI0_SEL_IN_RDMA1
+ },
+ {
+ DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
+ MT8365_DISP_REG_CONFIG_DISP_RDMA1_SOUT_SEL,
+ MT8365_RDMA1_SOUT_DPI0, MT8365_RDMA1_SOUT_DPI0
+ },
};
#endif /* __SOC_MEDIATEK_MT8365_MMSYS_H */
u32 vio_dbg1;
};
-struct mtk_devapc_data {
- /* numbers of violation index */
- u32 vio_idx_num;
-
+struct mtk_devapc_regs_ofs {
/* reg offset */
u32 vio_mask_offset;
u32 vio_sta_offset;
u32 vio_shift_con_offset;
};
+struct mtk_devapc_data {
+ /* numbers of violation index */
+ u32 vio_idx_num;
+ const struct mtk_devapc_regs_ofs *regs_ofs;
+};
+
struct mtk_devapc_context {
struct device *dev;
void __iomem *infra_base;
void __iomem *reg;
int i;
- reg = ctx->infra_base + ctx->data->vio_sta_offset;
+ reg = ctx->infra_base + ctx->data->regs_ofs->vio_sta_offset;
for (i = 0; i < VIO_MOD_TO_REG_IND(ctx->data->vio_idx_num) - 1; i++)
writel(GENMASK(31, 0), reg + 4 * i);
u32 val;
int i;
- reg = ctx->infra_base + ctx->data->vio_mask_offset;
+ reg = ctx->infra_base + ctx->data->regs_ofs->vio_mask_offset;
if (mask)
val = GENMASK(31, 0);
u32 val;
pd_vio_shift_sta_reg = ctx->infra_base +
- ctx->data->vio_shift_sta_offset;
+ ctx->data->regs_ofs->vio_shift_sta_offset;
pd_vio_shift_sel_reg = ctx->infra_base +
- ctx->data->vio_shift_sel_offset;
+ ctx->data->regs_ofs->vio_shift_sel_offset;
pd_vio_shift_con_reg = ctx->infra_base +
- ctx->data->vio_shift_con_offset;
+ ctx->data->regs_ofs->vio_shift_con_offset;
/* Find the minimum shift group which has violation */
val = readl(pd_vio_shift_sta_reg);
void __iomem *vio_dbg0_reg;
void __iomem *vio_dbg1_reg;
- vio_dbg0_reg = ctx->infra_base + ctx->data->vio_dbg0_offset;
- vio_dbg1_reg = ctx->infra_base + ctx->data->vio_dbg1_offset;
+ vio_dbg0_reg = ctx->infra_base + ctx->data->regs_ofs->vio_dbg0_offset;
+ vio_dbg1_reg = ctx->infra_base + ctx->data->regs_ofs->vio_dbg1_offset;
vio_dbgs.vio_dbg0 = readl(vio_dbg0_reg);
vio_dbgs.vio_dbg1 = readl(vio_dbg1_reg);
*/
static void start_devapc(struct mtk_devapc_context *ctx)
{
- writel(BIT(31), ctx->infra_base + ctx->data->apc_con_offset);
+ writel(BIT(31), ctx->infra_base + ctx->data->regs_ofs->apc_con_offset);
mask_module_irq(ctx, false);
}
{
mask_module_irq(ctx, true);
- writel(BIT(2), ctx->infra_base + ctx->data->apc_con_offset);
+ writel(BIT(2), ctx->infra_base + ctx->data->regs_ofs->apc_con_offset);
}
-static const struct mtk_devapc_data devapc_mt6779 = {
- .vio_idx_num = 511,
+static const struct mtk_devapc_regs_ofs devapc_regs_ofs_mt6779 = {
.vio_mask_offset = 0x0,
.vio_sta_offset = 0x400,
.vio_dbg0_offset = 0x900,
.vio_shift_con_offset = 0xF20,
};
+static const struct mtk_devapc_data devapc_mt6779 = {
+ .vio_idx_num = 511,
+ .regs_ofs = &devapc_regs_ofs_mt6779,
+};
+
+static const struct mtk_devapc_data devapc_mt8186 = {
+ .vio_idx_num = 519,
+ .regs_ofs = &devapc_regs_ofs_mt6779,
+};
+
static const struct of_device_id mtk_devapc_dt_match[] = {
{
.compatible = "mediatek,mt6779-devapc",
.data = &devapc_mt6779,
+ }, {
+ .compatible = "mediatek,mt8186-devapc",
+ .data = &devapc_mt8186,
}, {
},
};
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/soc/mediatek/mtk-mmsys.h>
#include <linux/soc/mediatek/mtk-mutex.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
#define MT2701_MUTEX0_MOD0 0x2c
#define MT2701_MUTEX0_SOF0 0x30
#define MT8183_MUTEX_MOD_DISP_GAMMA0 16
#define MT8183_MUTEX_MOD_DISP_DITHER0 17
+#define MT8183_MUTEX_MOD_MDP_RDMA0 2
+#define MT8183_MUTEX_MOD_MDP_RSZ0 4
+#define MT8183_MUTEX_MOD_MDP_RSZ1 5
+#define MT8183_MUTEX_MOD_MDP_TDSHP0 6
+#define MT8183_MUTEX_MOD_MDP_WROT0 7
+#define MT8183_MUTEX_MOD_MDP_WDMA 8
+#define MT8183_MUTEX_MOD_MDP_AAL0 23
+#define MT8183_MUTEX_MOD_MDP_CCORR0 24
+
#define MT8173_MUTEX_MOD_DISP_OVL0 11
#define MT8173_MUTEX_MOD_DISP_OVL1 12
#define MT8173_MUTEX_MOD_DISP_RDMA0 13
#define MT8195_MUTEX_MOD_DISP_DP_INTF0 21
#define MT8195_MUTEX_MOD_DISP_PWM0 27
+#define MT8365_MUTEX_MOD_DISP_OVL0 7
+#define MT8365_MUTEX_MOD_DISP_OVL0_2L 8
+#define MT8365_MUTEX_MOD_DISP_RDMA0 9
+#define MT8365_MUTEX_MOD_DISP_RDMA1 10
+#define MT8365_MUTEX_MOD_DISP_WDMA0 11
+#define MT8365_MUTEX_MOD_DISP_COLOR0 12
+#define MT8365_MUTEX_MOD_DISP_CCORR 13
+#define MT8365_MUTEX_MOD_DISP_AAL 14
+#define MT8365_MUTEX_MOD_DISP_GAMMA 15
+#define MT8365_MUTEX_MOD_DISP_DITHER 16
+#define MT8365_MUTEX_MOD_DISP_DSI0 17
+#define MT8365_MUTEX_MOD_DISP_PWM0 20
+#define MT8365_MUTEX_MOD_DISP_DPI0 22
+
#define MT2712_MUTEX_MOD_DISP_PWM2 10
#define MT2712_MUTEX_MOD_DISP_OVL0 11
#define MT2712_MUTEX_MOD_DISP_OVL1 12
const unsigned int *mutex_sof;
const unsigned int mutex_mod_reg;
const unsigned int mutex_sof_reg;
+ const unsigned int *mutex_table_mod;
const bool no_clk;
};
void __iomem *regs;
struct mtk_mutex mutex[10];
const struct mtk_mutex_data *data;
+ phys_addr_t addr;
+ struct cmdq_client_reg cmdq_reg;
};
static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_WDMA0] = MT8183_MUTEX_MOD_DISP_WDMA0,
};
+static const unsigned int mt8183_mutex_table_mod[MUTEX_MOD_IDX_MAX] = {
+ [MUTEX_MOD_IDX_MDP_RDMA0] = MT8183_MUTEX_MOD_MDP_RDMA0,
+ [MUTEX_MOD_IDX_MDP_RSZ0] = MT8183_MUTEX_MOD_MDP_RSZ0,
+ [MUTEX_MOD_IDX_MDP_RSZ1] = MT8183_MUTEX_MOD_MDP_RSZ1,
+ [MUTEX_MOD_IDX_MDP_TDSHP0] = MT8183_MUTEX_MOD_MDP_TDSHP0,
+ [MUTEX_MOD_IDX_MDP_WROT0] = MT8183_MUTEX_MOD_MDP_WROT0,
+ [MUTEX_MOD_IDX_MDP_WDMA] = MT8183_MUTEX_MOD_MDP_WDMA,
+ [MUTEX_MOD_IDX_MDP_AAL0] = MT8183_MUTEX_MOD_MDP_AAL0,
+ [MUTEX_MOD_IDX_MDP_CCORR0] = MT8183_MUTEX_MOD_MDP_CCORR0,
+};
+
static const unsigned int mt8186_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL0] = MT8186_MUTEX_MOD_DISP_AAL0,
[DDP_COMPONENT_CCORR] = MT8186_MUTEX_MOD_DISP_CCORR0,
[DDP_COMPONENT_DP_INTF0] = MT8195_MUTEX_MOD_DISP_DP_INTF0,
};
+static const unsigned int mt8365_mutex_mod[DDP_COMPONENT_ID_MAX] = {
+ [DDP_COMPONENT_AAL0] = MT8365_MUTEX_MOD_DISP_AAL,
+ [DDP_COMPONENT_CCORR] = MT8365_MUTEX_MOD_DISP_CCORR,
+ [DDP_COMPONENT_COLOR0] = MT8365_MUTEX_MOD_DISP_COLOR0,
+ [DDP_COMPONENT_DITHER0] = MT8365_MUTEX_MOD_DISP_DITHER,
+ [DDP_COMPONENT_DPI0] = MT8365_MUTEX_MOD_DISP_DPI0,
+ [DDP_COMPONENT_DSI0] = MT8365_MUTEX_MOD_DISP_DSI0,
+ [DDP_COMPONENT_GAMMA] = MT8365_MUTEX_MOD_DISP_GAMMA,
+ [DDP_COMPONENT_OVL0] = MT8365_MUTEX_MOD_DISP_OVL0,
+ [DDP_COMPONENT_OVL_2L0] = MT8365_MUTEX_MOD_DISP_OVL0_2L,
+ [DDP_COMPONENT_PWM0] = MT8365_MUTEX_MOD_DISP_PWM0,
+ [DDP_COMPONENT_RDMA0] = MT8365_MUTEX_MOD_DISP_RDMA0,
+ [DDP_COMPONENT_RDMA1] = MT8365_MUTEX_MOD_DISP_RDMA1,
+ [DDP_COMPONENT_WDMA0] = MT8365_MUTEX_MOD_DISP_WDMA0,
+};
+
static const unsigned int mt2712_mutex_sof[DDP_MUTEX_SOF_MAX] = {
[MUTEX_SOF_SINGLE_MODE] = MUTEX_SOF_SINGLE_MODE,
[MUTEX_SOF_DSI0] = MUTEX_SOF_DSI0,
.mutex_sof = mt8183_mutex_sof,
.mutex_mod_reg = MT8183_MUTEX0_MOD0,
.mutex_sof_reg = MT8183_MUTEX0_SOF0,
+ .mutex_table_mod = mt8183_mutex_table_mod,
.no_clk = true,
};
.mutex_sof_reg = MT8183_MUTEX0_SOF0,
};
+static const struct mtk_mutex_data mt8365_mutex_driver_data = {
+ .mutex_mod = mt8365_mutex_mod,
+ .mutex_sof = mt8183_mutex_sof,
+ .mutex_mod_reg = MT8183_MUTEX0_MOD0,
+ .mutex_sof_reg = MT8183_MUTEX0_SOF0,
+ .no_clk = true,
+};
+
struct mtk_mutex *mtk_mutex_get(struct device *dev)
{
struct mtk_mutex_ctx *mtx = dev_get_drvdata(dev);
}
EXPORT_SYMBOL_GPL(mtk_mutex_enable);
+int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void *pkt)
+{
+ struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
+ mutex[mutex->id]);
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt;
+
+ WARN_ON(&mtx->mutex[mutex->id] != mutex);
+
+ if (!mtx->cmdq_reg.size) {
+ dev_err(mtx->dev, "mediatek,gce-client-reg hasn't been set");
+ return -EINVAL;
+ }
+
+ cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys,
+ mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1);
+ return 0;
+#else
+ dev_err(mtx->dev, "Not support for enable MUTEX by CMDQ");
+ return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
+
void mtk_mutex_disable(struct mtk_mutex *mutex)
{
struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
}
EXPORT_SYMBOL_GPL(mtk_mutex_release);
+int mtk_mutex_write_mod(struct mtk_mutex *mutex,
+ enum mtk_mutex_mod_index idx, bool clear)
+{
+ struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
+ mutex[mutex->id]);
+ unsigned int reg;
+ unsigned int offset;
+
+ WARN_ON(&mtx->mutex[mutex->id] != mutex);
+
+ if (idx < MUTEX_MOD_IDX_MDP_RDMA0 ||
+ idx >= MUTEX_MOD_IDX_MAX) {
+ dev_err(mtx->dev, "Not supported MOD table index : %d", idx);
+ return -EINVAL;
+ }
+
+ offset = DISP_REG_MUTEX_MOD(mtx->data->mutex_mod_reg,
+ mutex->id);
+ reg = readl_relaxed(mtx->regs + offset);
+
+ if (clear)
+ reg &= ~BIT(mtx->data->mutex_table_mod[idx]);
+ else
+ reg |= BIT(mtx->data->mutex_table_mod[idx]);
+
+ writel_relaxed(reg, mtx->regs + offset);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_mutex_write_mod);
+
+int mtk_mutex_write_sof(struct mtk_mutex *mutex,
+ enum mtk_mutex_sof_index idx)
+{
+ struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
+ mutex[mutex->id]);
+
+ WARN_ON(&mtx->mutex[mutex->id] != mutex);
+
+ if (idx < MUTEX_SOF_IDX_SINGLE_MODE ||
+ idx >= MUTEX_SOF_IDX_MAX) {
+ dev_err(mtx->dev, "Not supported SOF index : %d", idx);
+ return -EINVAL;
+ }
+
+ writel_relaxed(idx, mtx->regs +
+ DISP_REG_MUTEX_SOF(mtx->data->mutex_sof_reg, mutex->id));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_mutex_write_sof);
+
static int mtk_mutex_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_mutex_ctx *mtx;
struct resource *regs;
int i;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ int ret;
+#endif
mtx = devm_kzalloc(dev, sizeof(*mtx), GFP_KERNEL);
if (!mtx)
}
}
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mtx->regs = devm_ioremap_resource(dev, regs);
+ mtx->regs = devm_platform_get_and_ioremap_resource(pdev, 0, ®s);
if (IS_ERR(mtx->regs)) {
dev_err(dev, "Failed to map mutex registers\n");
return PTR_ERR(mtx->regs);
}
+ mtx->addr = regs->start;
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ ret = cmdq_dev_get_client_reg(dev, &mtx->cmdq_reg, 0);
+ if (ret)
+ dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
platform_set_drvdata(pdev, mtx);
.data = &mt8192_mutex_driver_data},
{ .compatible = "mediatek,mt8195-disp-mutex",
.data = &mt8195_mutex_driver_data},
+ { .compatible = "mediatek,mt8365-disp-mutex",
+ .data = &mt8365_mutex_driver_data},
{},
};
MODULE_DEVICE_TABLE(of, mutex_driver_dt_match);
#include <linux/regulator/consumer.h>
#include <linux/soc/mediatek/infracfg.h>
+#include "mt6795-pm-domains.h"
#include "mt8167-pm-domains.h"
#include "mt8173-pm-domains.h"
#include "mt8183-pm-domains.h"
dev_err(scpsys->dev, "%pOF: failed to power on domain: %d\n", node, ret);
goto err_put_subsys_clocks;
}
+
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_ALWAYS_ON))
+ pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
}
if (scpsys->domains[id]) {
}
static const struct of_device_id scpsys_of_match[] = {
+ {
+ .compatible = "mediatek,mt6795-power-controller",
+ .data = &mt6795_scpsys_data,
+ },
{
.compatible = "mediatek,mt8167-power-controller",
.data = &mt8167_scpsys_data,
#define MTK_SCPD_SRAM_ISO BIT(2)
#define MTK_SCPD_KEEP_DEFAULT_OFF BIT(3)
#define MTK_SCPD_DOMAIN_SUPPLY BIT(4)
+/* can't set MTK_SCPD_KEEP_DEFAULT_OFF at the same time */
+#define MTK_SCPD_ALWAYS_ON BIT(5)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
#include <linux/regmap.h>
#include <linux/reset.h>
+#define PWRAP_POLL_DELAY_US 10
+#define PWRAP_POLL_TIMEOUT_US 10000
+
#define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4
#define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10
#define PWRAP_MT8135_BRIDGE_INIT_DONE3 0x14
};
struct pmic_wrapper;
-struct pwrap_slv_type {
- const u32 *dew_regs;
- enum pmic_type type;
+
+struct pwrap_slv_regops {
const struct regmap_config *regmap;
- /* Flags indicating the capability for the target slave */
- u32 caps;
/*
* pwrap operations are highly associated with the PMIC types,
* so the pointers added increases flexibility allowing determination
int (*pwrap_write)(struct pmic_wrapper *wrp, u32 adr, u32 wdata);
};
+struct pwrap_slv_type {
+ const u32 *dew_regs;
+ enum pmic_type type;
+ const struct pwrap_slv_regops *regops;
+ /* Flags indicating the capability for the target slave */
+ u32 caps;
+};
+
struct pmic_wrapper {
struct device *dev;
void __iomem *base;
(val & PWRAP_STATE_SYNC_IDLE0);
}
-static int pwrap_wait_for_state(struct pmic_wrapper *wrp,
- bool (*fp)(struct pmic_wrapper *))
-{
- unsigned long timeout;
-
- timeout = jiffies + usecs_to_jiffies(10000);
-
- do {
- if (time_after(jiffies, timeout))
- return fp(wrp) ? 0 : -ETIMEDOUT;
- if (fp(wrp))
- return 0;
- } while (1);
-}
-
static int pwrap_read16(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
{
+ bool tmp;
int ret;
u32 val;
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
val = (adr >> 1) << 16;
pwrap_writel(wrp, val, PWRAP_WACS2_CMD);
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
+ ret = readx_poll_timeout(pwrap_is_fsm_vldclr, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret)
return ret;
static int pwrap_read32(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
{
+ bool tmp;
int ret, msb;
*rdata = 0;
for (msb = 0; msb < 2; msb++) {
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
+
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
pwrap_writel(wrp, ((msb << 30) | (adr << 16)),
PWRAP_WACS2_CMD);
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
+ ret = readx_poll_timeout(pwrap_is_fsm_vldclr, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret)
return ret;
static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
{
- return wrp->slave->pwrap_read(wrp, adr, rdata);
+ return wrp->slave->regops->pwrap_read(wrp, adr, rdata);
}
static int pwrap_write16(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
{
+ bool tmp;
int ret;
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
static int pwrap_write32(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
{
+ bool tmp;
int ret, msb, rdata;
for (msb = 0; msb < 2; msb++) {
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
{
- return wrp->slave->pwrap_write(wrp, adr, wdata);
+ return wrp->slave->regops->pwrap_write(wrp, adr, wdata);
}
static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
static int pwrap_reset_spislave(struct pmic_wrapper *wrp)
{
+ bool tmp;
int ret, i;
pwrap_writel(wrp, 0, PWRAP_HIPRIO_ARB_EN);
pwrap_writel(wrp, wrp->master->spi_w | PWRAP_MAN_CMD_OP_OUTS,
PWRAP_MAN_CMD);
- ret = pwrap_wait_for_state(wrp, pwrap_is_sync_idle);
+ ret = readx_poll_timeout(pwrap_is_sync_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
return ret;
static int pwrap_init_dual_io(struct pmic_wrapper *wrp)
{
int ret;
+ bool tmp;
u32 rdata;
/* Enable dual IO mode */
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_DIO_EN], 1);
/* Check IDLE & INIT_DONE in advance */
- ret = pwrap_wait_for_state(wrp,
- pwrap_is_fsm_idle_and_sync_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle_and_sync_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
return ret;
static int pwrap_init_cipher(struct pmic_wrapper *wrp)
{
int ret;
+ bool tmp;
u32 rdata = 0;
pwrap_writel(wrp, 0x1, PWRAP_CIPHER_SWRST);
}
/* wait for cipher data ready@AP */
- ret = pwrap_wait_for_state(wrp, pwrap_is_cipher_ready);
+ ret = readx_poll_timeout(pwrap_is_cipher_ready, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
dev_err(wrp->dev, "cipher data ready@AP fail, ret=%d\n", ret);
return ret;
}
/* wait for cipher data ready@PMIC */
- ret = pwrap_wait_for_state(wrp, pwrap_is_pmic_cipher_ready);
+ ret = readx_poll_timeout(pwrap_is_pmic_cipher_ready, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
dev_err(wrp->dev,
"timeout waiting for cipher data ready@PMIC\n");
/* wait for cipher mode idle */
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_MODE], 0x1);
- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle);
+ ret = readx_poll_timeout(pwrap_is_fsm_idle_and_sync_idle, wrp, tmp, tmp,
+ PWRAP_POLL_DELAY_US, PWRAP_POLL_TIMEOUT_US);
if (ret) {
dev_err(wrp->dev, "cipher mode idle fail, ret=%d\n", ret);
return ret;
.max_register = 0xffff,
};
+static const struct pwrap_slv_regops pwrap_regops16 = {
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+ .regmap = &pwrap_regmap_config16,
+};
+
+static const struct pwrap_slv_regops pwrap_regops32 = {
+ .pwrap_read = pwrap_read32,
+ .pwrap_write = pwrap_write32,
+ .regmap = &pwrap_regmap_config32,
+};
+
static const struct pwrap_slv_type pmic_mt6323 = {
.dew_regs = mt6323_regs,
.type = PMIC_MT6323,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6351 = {
.dew_regs = mt6351_regs,
.type = PMIC_MT6351,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = 0,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6357 = {
.dew_regs = mt6357_regs,
.type = PMIC_MT6357,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = 0,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6358 = {
.dew_regs = mt6358_regs,
.type = PMIC_MT6358,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6359 = {
.dew_regs = mt6359_regs,
.type = PMIC_MT6359,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = PWRAP_SLV_CAP_DUALIO,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6380 = {
.dew_regs = NULL,
.type = PMIC_MT6380,
- .regmap = &pwrap_regmap_config32,
+ .regops = &pwrap_regops32,
.caps = 0,
- .pwrap_read = pwrap_read32,
- .pwrap_write = pwrap_write32,
};
static const struct pwrap_slv_type pmic_mt6397 = {
.dew_regs = mt6397_regs,
.type = PMIC_MT6397,
- .regmap = &pwrap_regmap_config16,
+ .regops = &pwrap_regops16,
.caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
};
static const struct of_device_id of_slave_match_tbl[] = {
- {
- .compatible = "mediatek,mt6323",
- .data = &pmic_mt6323,
- }, {
- .compatible = "mediatek,mt6351",
- .data = &pmic_mt6351,
- }, {
- .compatible = "mediatek,mt6357",
- .data = &pmic_mt6357,
- }, {
- .compatible = "mediatek,mt6358",
- .data = &pmic_mt6358,
- }, {
- .compatible = "mediatek,mt6359",
- .data = &pmic_mt6359,
- }, {
- /* The MT6380 PMIC only implements a regulator, so we bind it
- * directly instead of using a MFD.
- */
- .compatible = "mediatek,mt6380-regulator",
- .data = &pmic_mt6380,
- }, {
- .compatible = "mediatek,mt6397",
- .data = &pmic_mt6397,
- }, {
- /* sentinel */
- }
+ { .compatible = "mediatek,mt6323", .data = &pmic_mt6323 },
+ { .compatible = "mediatek,mt6351", .data = &pmic_mt6351 },
+ { .compatible = "mediatek,mt6357", .data = &pmic_mt6357 },
+ { .compatible = "mediatek,mt6358", .data = &pmic_mt6358 },
+ { .compatible = "mediatek,mt6359", .data = &pmic_mt6359 },
+
+ /* The MT6380 PMIC only implements a regulator, so we bind it
+ * directly instead of using a MFD.
+ */
+ { .compatible = "mediatek,mt6380-regulator", .data = &pmic_mt6380 },
+ { .compatible = "mediatek,mt6397", .data = &pmic_mt6397 },
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_slave_match_tbl);
};
static const struct of_device_id of_pwrap_match_tbl[] = {
- {
- .compatible = "mediatek,mt2701-pwrap",
- .data = &pwrap_mt2701,
- }, {
- .compatible = "mediatek,mt6765-pwrap",
- .data = &pwrap_mt6765,
- }, {
- .compatible = "mediatek,mt6779-pwrap",
- .data = &pwrap_mt6779,
- }, {
- .compatible = "mediatek,mt6797-pwrap",
- .data = &pwrap_mt6797,
- }, {
- .compatible = "mediatek,mt6873-pwrap",
- .data = &pwrap_mt6873,
- }, {
- .compatible = "mediatek,mt7622-pwrap",
- .data = &pwrap_mt7622,
- }, {
- .compatible = "mediatek,mt8135-pwrap",
- .data = &pwrap_mt8135,
- }, {
- .compatible = "mediatek,mt8173-pwrap",
- .data = &pwrap_mt8173,
- }, {
- .compatible = "mediatek,mt8183-pwrap",
- .data = &pwrap_mt8183,
- }, {
- .compatible = "mediatek,mt8186-pwrap",
- .data = &pwrap_mt8186,
- }, {
- .compatible = "mediatek,mt8195-pwrap",
- .data = &pwrap_mt8195,
- }, {
- .compatible = "mediatek,mt8516-pwrap",
- .data = &pwrap_mt8516,
- }, {
- /* sentinel */
- }
+ { .compatible = "mediatek,mt2701-pwrap", .data = &pwrap_mt2701 },
+ { .compatible = "mediatek,mt6765-pwrap", .data = &pwrap_mt6765 },
+ { .compatible = "mediatek,mt6779-pwrap", .data = &pwrap_mt6779 },
+ { .compatible = "mediatek,mt6797-pwrap", .data = &pwrap_mt6797 },
+ { .compatible = "mediatek,mt6873-pwrap", .data = &pwrap_mt6873 },
+ { .compatible = "mediatek,mt7622-pwrap", .data = &pwrap_mt7622 },
+ { .compatible = "mediatek,mt8135-pwrap", .data = &pwrap_mt8135 },
+ { .compatible = "mediatek,mt8173-pwrap", .data = &pwrap_mt8173 },
+ { .compatible = "mediatek,mt8183-pwrap", .data = &pwrap_mt8183 },
+ { .compatible = "mediatek,mt8186-pwrap", .data = &pwrap_mt8186 },
+ { .compatible = "mediatek,mt8195-pwrap", .data = &pwrap_mt8195 },
+ { .compatible = "mediatek,mt8516-pwrap", .data = &pwrap_mt8516 },
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
struct pmic_wrapper *wrp;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_slave_id = NULL;
- struct resource *res;
if (np->child)
of_slave_id = of_match_node(of_slave_match_tbl, np->child);
wrp->slave = of_slave_id->data;
wrp->dev = &pdev->dev;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwrap");
- wrp->base = devm_ioremap_resource(wrp->dev, res);
+ wrp->base = devm_platform_ioremap_resource_byname(pdev, "pwrap");
if (IS_ERR(wrp->base))
return PTR_ERR(wrp->base);
}
if (HAS_CAP(wrp->master->caps, PWRAP_CAP_BRIDGE)) {
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "pwrap-bridge");
- wrp->bridge_base = devm_ioremap_resource(wrp->dev, res);
+ wrp->bridge_base = devm_platform_ioremap_resource_byname(pdev, "pwrap-bridge");
if (IS_ERR(wrp->bridge_base))
return PTR_ERR(wrp->bridge_base);
pwrap_writel(wrp, wrp->master->int1_en_all, PWRAP_INT1_EN);
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto err_out2;
+ }
+
ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt,
IRQF_TRIGGER_HIGH,
"mt-pmic-pwrap", wrp);
if (ret)
goto err_out2;
- wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, wrp->slave->regmap);
+ wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, wrp->slave->regops->regmap);
if (IS_ERR(wrp->regmap)) {
ret = PTR_ERR(wrp->regmap);
goto err_out2;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/cpuidle.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/thermal.h>
+
+/* svs bank 1-line software id */
+#define SVSB_CPU_LITTLE BIT(0)
+#define SVSB_CPU_BIG BIT(1)
+#define SVSB_CCI BIT(2)
+#define SVSB_GPU BIT(3)
+
+/* svs bank 2-line type */
+#define SVSB_LOW BIT(8)
+#define SVSB_HIGH BIT(9)
+
+/* svs bank mode support */
+#define SVSB_MODE_ALL_DISABLE 0
+#define SVSB_MODE_INIT01 BIT(1)
+#define SVSB_MODE_INIT02 BIT(2)
+#define SVSB_MODE_MON BIT(3)
+
+/* svs bank volt flags */
+#define SVSB_INIT01_PD_REQ BIT(0)
+#define SVSB_INIT01_VOLT_IGNORE BIT(1)
+#define SVSB_INIT01_VOLT_INC_ONLY BIT(2)
+#define SVSB_MON_VOLT_IGNORE BIT(16)
+#define SVSB_REMOVE_DVTFIXED_VOLT BIT(24)
+
+/* svs bank register common configuration */
+#define SVSB_DET_MAX 0xffff
+#define SVSB_DET_WINDOW 0xa28
+#define SVSB_DTHI 0x1
+#define SVSB_DTLO 0xfe
+#define SVSB_EN_INIT01 0x1
+#define SVSB_EN_INIT02 0x5
+#define SVSB_EN_MON 0x2
+#define SVSB_EN_OFF 0x0
+#define SVSB_INTEN_INIT0x 0x00005f01
+#define SVSB_INTEN_MONVOPEN 0x00ff0000
+#define SVSB_INTSTS_CLEAN 0x00ffffff
+#define SVSB_INTSTS_COMPLETE 0x1
+#define SVSB_INTSTS_MONVOP 0x00ff0000
+#define SVSB_RUNCONFIG_DEFAULT 0x80000000
+
+/* svs bank related setting */
+#define BITS8 8
+#define MAX_OPP_ENTRIES 16
+#define REG_BYTES 4
+#define SVSB_DC_SIGNED_BIT BIT(15)
+#define SVSB_DET_CLK_EN BIT(31)
+#define SVSB_TEMP_LOWER_BOUND 0xb2
+#define SVSB_TEMP_UPPER_BOUND 0x64
+
+static DEFINE_SPINLOCK(svs_lock);
+
+#define debug_fops_ro(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define debug_fops_rw(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .write = svs_##name##_debug_write, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define svs_dentry_data(name) {__stringify(name), &svs_##name##_debug_fops}
+
+/**
+ * enum svsb_phase - svs bank phase enumeration
+ * @SVSB_PHASE_ERROR: svs bank encounters unexpected condition
+ * @SVSB_PHASE_INIT01: svs bank basic init for data calibration
+ * @SVSB_PHASE_INIT02: svs bank can provide voltages to opp table
+ * @SVSB_PHASE_MON: svs bank can provide voltages with thermal effect
+ * @SVSB_PHASE_MAX: total number of svs bank phase (debug purpose)
+ *
+ * Each svs bank has its own independent phase and we enable each svs bank by
+ * running their phase orderly. However, when svs bank encounters unexpected
+ * condition, it will fire an irq (PHASE_ERROR) to inform svs software.
+ *
+ * svs bank general phase-enabled order:
+ * SVSB_PHASE_INIT01 -> SVSB_PHASE_INIT02 -> SVSB_PHASE_MON
+ */
+enum svsb_phase {
+ SVSB_PHASE_ERROR = 0,
+ SVSB_PHASE_INIT01,
+ SVSB_PHASE_INIT02,
+ SVSB_PHASE_MON,
+ SVSB_PHASE_MAX,
+};
+
+enum svs_reg_index {
+ DESCHAR = 0,
+ TEMPCHAR,
+ DETCHAR,
+ AGECHAR,
+ DCCONFIG,
+ AGECONFIG,
+ FREQPCT30,
+ FREQPCT74,
+ LIMITVALS,
+ VBOOT,
+ DETWINDOW,
+ CONFIG,
+ TSCALCS,
+ RUNCONFIG,
+ SVSEN,
+ INIT2VALS,
+ DCVALUES,
+ AGEVALUES,
+ VOP30,
+ VOP74,
+ TEMP,
+ INTSTS,
+ INTSTSRAW,
+ INTEN,
+ CHKINT,
+ CHKSHIFT,
+ STATUS,
+ VDESIGN30,
+ VDESIGN74,
+ DVT30,
+ DVT74,
+ AGECOUNT,
+ SMSTATE0,
+ SMSTATE1,
+ CTL0,
+ DESDETSEC,
+ TEMPAGESEC,
+ CTRLSPARE0,
+ CTRLSPARE1,
+ CTRLSPARE2,
+ CTRLSPARE3,
+ CORESEL,
+ THERMINTST,
+ INTST,
+ THSTAGE0ST,
+ THSTAGE1ST,
+ THSTAGE2ST,
+ THAHBST0,
+ THAHBST1,
+ SPARE0,
+ SPARE1,
+ SPARE2,
+ SPARE3,
+ THSLPEVEB,
+ SVS_REG_MAX,
+};
+
+static const u32 svs_regs_v2[] = {
+ [DESCHAR] = 0xc00,
+ [TEMPCHAR] = 0xc04,
+ [DETCHAR] = 0xc08,
+ [AGECHAR] = 0xc0c,
+ [DCCONFIG] = 0xc10,
+ [AGECONFIG] = 0xc14,
+ [FREQPCT30] = 0xc18,
+ [FREQPCT74] = 0xc1c,
+ [LIMITVALS] = 0xc20,
+ [VBOOT] = 0xc24,
+ [DETWINDOW] = 0xc28,
+ [CONFIG] = 0xc2c,
+ [TSCALCS] = 0xc30,
+ [RUNCONFIG] = 0xc34,
+ [SVSEN] = 0xc38,
+ [INIT2VALS] = 0xc3c,
+ [DCVALUES] = 0xc40,
+ [AGEVALUES] = 0xc44,
+ [VOP30] = 0xc48,
+ [VOP74] = 0xc4c,
+ [TEMP] = 0xc50,
+ [INTSTS] = 0xc54,
+ [INTSTSRAW] = 0xc58,
+ [INTEN] = 0xc5c,
+ [CHKINT] = 0xc60,
+ [CHKSHIFT] = 0xc64,
+ [STATUS] = 0xc68,
+ [VDESIGN30] = 0xc6c,
+ [VDESIGN74] = 0xc70,
+ [DVT30] = 0xc74,
+ [DVT74] = 0xc78,
+ [AGECOUNT] = 0xc7c,
+ [SMSTATE0] = 0xc80,
+ [SMSTATE1] = 0xc84,
+ [CTL0] = 0xc88,
+ [DESDETSEC] = 0xce0,
+ [TEMPAGESEC] = 0xce4,
+ [CTRLSPARE0] = 0xcf0,
+ [CTRLSPARE1] = 0xcf4,
+ [CTRLSPARE2] = 0xcf8,
+ [CTRLSPARE3] = 0xcfc,
+ [CORESEL] = 0xf00,
+ [THERMINTST] = 0xf04,
+ [INTST] = 0xf08,
+ [THSTAGE0ST] = 0xf0c,
+ [THSTAGE1ST] = 0xf10,
+ [THSTAGE2ST] = 0xf14,
+ [THAHBST0] = 0xf18,
+ [THAHBST1] = 0xf1c,
+ [SPARE0] = 0xf20,
+ [SPARE1] = 0xf24,
+ [SPARE2] = 0xf28,
+ [SPARE3] = 0xf2c,
+ [THSLPEVEB] = 0xf30,
+};
+
+/**
+ * struct svs_platform - svs platform control
+ * @name: svs platform name
+ * @base: svs platform register base
+ * @dev: svs platform device
+ * @main_clk: main clock for svs bank
+ * @pbank: svs bank pointer needing to be protected by spin_lock section
+ * @banks: svs banks that svs platform supports
+ * @rst: svs platform reset control
+ * @efuse_parsing: svs platform efuse parsing function pointer
+ * @probe: svs platform probe function pointer
+ * @irqflags: svs platform irq settings flags
+ * @efuse_max: total number of svs efuse
+ * @tefuse_max: total number of thermal efuse
+ * @regs: svs platform registers map
+ * @bank_max: total number of svs banks
+ * @efuse: svs efuse data received from NVMEM framework
+ * @tefuse: thermal efuse data received from NVMEM framework
+ */
+struct svs_platform {
+ char *name;
+ void __iomem *base;
+ struct device *dev;
+ struct clk *main_clk;
+ struct svs_bank *pbank;
+ struct svs_bank *banks;
+ struct reset_control *rst;
+ bool (*efuse_parsing)(struct svs_platform *svsp);
+ int (*probe)(struct svs_platform *svsp);
+ unsigned long irqflags;
+ size_t efuse_max;
+ size_t tefuse_max;
+ const u32 *regs;
+ u32 bank_max;
+ u32 *efuse;
+ u32 *tefuse;
+};
+
+struct svs_platform_data {
+ char *name;
+ struct svs_bank *banks;
+ bool (*efuse_parsing)(struct svs_platform *svsp);
+ int (*probe)(struct svs_platform *svsp);
+ unsigned long irqflags;
+ const u32 *regs;
+ u32 bank_max;
+};
+
+/**
+ * struct svs_bank - svs bank representation
+ * @dev: bank device
+ * @opp_dev: device for opp table/buck control
+ * @init_completion: the timeout completion for bank init
+ * @buck: regulator used by opp_dev
+ * @tzd: thermal zone device for getting temperature
+ * @lock: mutex lock to protect voltage update process
+ * @set_freq_pct: function pointer to set bank frequency percent table
+ * @get_volts: function pointer to get bank voltages
+ * @name: bank name
+ * @buck_name: regulator name
+ * @tzone_name: thermal zone name
+ * @phase: bank current phase
+ * @volt_od: bank voltage overdrive
+ * @reg_data: bank register data in different phase for debug purpose
+ * @pm_runtime_enabled_count: bank pm runtime enabled count
+ * @mode_support: bank mode support.
+ * @freq_base: reference frequency for bank init
+ * @turn_freq_base: refenrece frequency for 2-line turn point
+ * @vboot: voltage request for bank init01 only
+ * @opp_dfreq: default opp frequency table
+ * @opp_dvolt: default opp voltage table
+ * @freq_pct: frequency percent table for bank init
+ * @volt: bank voltage table
+ * @volt_step: bank voltage step
+ * @volt_base: bank voltage base
+ * @volt_flags: bank voltage flags
+ * @vmax: bank voltage maximum
+ * @vmin: bank voltage minimum
+ * @age_config: bank age configuration
+ * @age_voffset_in: bank age voltage offset
+ * @dc_config: bank dc configuration
+ * @dc_voffset_in: bank dc voltage offset
+ * @dvt_fixed: bank dvt fixed value
+ * @vco: bank VCO value
+ * @chk_shift: bank chicken shift
+ * @core_sel: bank selection
+ * @opp_count: bank opp count
+ * @int_st: bank interrupt identification
+ * @sw_id: bank software identification
+ * @cpu_id: cpu core id for SVS CPU bank use only
+ * @ctl0: TS-x selection
+ * @temp: bank temperature
+ * @tzone_htemp: thermal zone high temperature threshold
+ * @tzone_htemp_voffset: thermal zone high temperature voltage offset
+ * @tzone_ltemp: thermal zone low temperature threshold
+ * @tzone_ltemp_voffset: thermal zone low temperature voltage offset
+ * @bts: svs efuse data
+ * @mts: svs efuse data
+ * @bdes: svs efuse data
+ * @mdes: svs efuse data
+ * @mtdes: svs efuse data
+ * @dcbdet: svs efuse data
+ * @dcmdet: svs efuse data
+ * @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
+ * @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
+ *
+ * Svs bank will generate suitalbe voltages by below general math equation
+ * and provide these voltages to opp voltage table.
+ *
+ * opp_volt[i] = (volt[i] * volt_step) + volt_base;
+ */
+struct svs_bank {
+ struct device *dev;
+ struct device *opp_dev;
+ struct completion init_completion;
+ struct regulator *buck;
+ struct thermal_zone_device *tzd;
+ struct mutex lock; /* lock to protect voltage update process */
+ void (*set_freq_pct)(struct svs_platform *svsp);
+ void (*get_volts)(struct svs_platform *svsp);
+ char *name;
+ char *buck_name;
+ char *tzone_name;
+ enum svsb_phase phase;
+ s32 volt_od;
+ u32 reg_data[SVSB_PHASE_MAX][SVS_REG_MAX];
+ u32 pm_runtime_enabled_count;
+ u32 mode_support;
+ u32 freq_base;
+ u32 turn_freq_base;
+ u32 vboot;
+ u32 opp_dfreq[MAX_OPP_ENTRIES];
+ u32 opp_dvolt[MAX_OPP_ENTRIES];
+ u32 freq_pct[MAX_OPP_ENTRIES];
+ u32 volt[MAX_OPP_ENTRIES];
+ u32 volt_step;
+ u32 volt_base;
+ u32 volt_flags;
+ u32 vmax;
+ u32 vmin;
+ u32 age_config;
+ u32 age_voffset_in;
+ u32 dc_config;
+ u32 dc_voffset_in;
+ u32 dvt_fixed;
+ u32 vco;
+ u32 chk_shift;
+ u32 core_sel;
+ u32 opp_count;
+ u32 int_st;
+ u32 sw_id;
+ u32 cpu_id;
+ u32 ctl0;
+ u32 temp;
+ u32 tzone_htemp;
+ u32 tzone_htemp_voffset;
+ u32 tzone_ltemp;
+ u32 tzone_ltemp_voffset;
+ u32 bts;
+ u32 mts;
+ u32 bdes;
+ u32 mdes;
+ u32 mtdes;
+ u32 dcbdet;
+ u32 dcmdet;
+ u32 turn_pt;
+ u32 type;
+};
+
+static u32 percent(u32 numerator, u32 denominator)
+{
+ /* If not divide 1000, "numerator * 100" will have data overflow. */
+ numerator /= 1000;
+ denominator /= 1000;
+
+ return DIV_ROUND_UP(numerator * 100, denominator);
+}
+
+static u32 svs_readl_relaxed(struct svs_platform *svsp, enum svs_reg_index rg_i)
+{
+ return readl_relaxed(svsp->base + svsp->regs[rg_i]);
+}
+
+static void svs_writel_relaxed(struct svs_platform *svsp, u32 val,
+ enum svs_reg_index rg_i)
+{
+ writel_relaxed(val, svsp->base + svsp->regs[rg_i]);
+}
+
+static void svs_switch_bank(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ svs_writel_relaxed(svsp, svsb->core_sel, CORESEL);
+}
+
+static u32 svs_bank_volt_to_opp_volt(u32 svsb_volt, u32 svsb_volt_step,
+ u32 svsb_volt_base)
+{
+ return (svsb_volt * svsb_volt_step) + svsb_volt_base;
+}
+
+static u32 svs_opp_volt_to_bank_volt(u32 opp_u_volt, u32 svsb_volt_step,
+ u32 svsb_volt_base)
+{
+ return (opp_u_volt - svsb_volt_base) / svsb_volt_step;
+}
+
+static int svs_sync_bank_volts_from_opp(struct svs_bank *svsb)
+{
+ struct dev_pm_opp *opp;
+ u32 i, opp_u_volt;
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
+ svsb->opp_dfreq[i],
+ true);
+ if (IS_ERR(opp)) {
+ dev_err(svsb->dev, "cannot find freq = %u (%ld)\n",
+ svsb->opp_dfreq[i], PTR_ERR(opp));
+ return PTR_ERR(opp);
+ }
+
+ opp_u_volt = dev_pm_opp_get_voltage(opp);
+ svsb->volt[i] = svs_opp_volt_to_bank_volt(opp_u_volt,
+ svsb->volt_step,
+ svsb->volt_base);
+ dev_pm_opp_put(opp);
+ }
+
+ return 0;
+}
+
+static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
+{
+ int ret = -EPERM, tzone_temp = 0;
+ u32 i, svsb_volt, opp_volt, temp_voffset = 0, opp_start, opp_stop;
+
+ mutex_lock(&svsb->lock);
+
+ /*
+ * 2-line bank updates its corresponding opp volts.
+ * 1-line bank updates all opp volts.
+ */
+ if (svsb->type == SVSB_HIGH) {
+ opp_start = 0;
+ opp_stop = svsb->turn_pt;
+ } else if (svsb->type == SVSB_LOW) {
+ opp_start = svsb->turn_pt;
+ opp_stop = svsb->opp_count;
+ } else {
+ opp_start = 0;
+ opp_stop = svsb->opp_count;
+ }
+
+ /* Get thermal effect */
+ if (svsb->phase == SVSB_PHASE_MON) {
+ ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
+ if (ret || (svsb->temp > SVSB_TEMP_UPPER_BOUND &&
+ svsb->temp < SVSB_TEMP_LOWER_BOUND)) {
+ dev_err(svsb->dev, "%s: %d (0x%x), run default volts\n",
+ svsb->tzone_name, ret, svsb->temp);
+ svsb->phase = SVSB_PHASE_ERROR;
+ }
+
+ if (tzone_temp >= svsb->tzone_htemp)
+ temp_voffset += svsb->tzone_htemp_voffset;
+ else if (tzone_temp <= svsb->tzone_ltemp)
+ temp_voffset += svsb->tzone_ltemp_voffset;
+
+ /* 2-line bank update all opp volts when running mon mode */
+ if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) {
+ opp_start = 0;
+ opp_stop = svsb->opp_count;
+ }
+ }
+
+ /* vmin <= svsb_volt (opp_volt) <= default opp voltage */
+ for (i = opp_start; i < opp_stop; i++) {
+ switch (svsb->phase) {
+ case SVSB_PHASE_ERROR:
+ opp_volt = svsb->opp_dvolt[i];
+ break;
+ case SVSB_PHASE_INIT01:
+ /* do nothing */
+ goto unlock_mutex;
+ case SVSB_PHASE_INIT02:
+ svsb_volt = max(svsb->volt[i], svsb->vmin);
+ opp_volt = svs_bank_volt_to_opp_volt(svsb_volt,
+ svsb->volt_step,
+ svsb->volt_base);
+ break;
+ case SVSB_PHASE_MON:
+ svsb_volt = max(svsb->volt[i] + temp_voffset, svsb->vmin);
+ opp_volt = svs_bank_volt_to_opp_volt(svsb_volt,
+ svsb->volt_step,
+ svsb->volt_base);
+ break;
+ default:
+ dev_err(svsb->dev, "unknown phase: %u\n", svsb->phase);
+ ret = -EINVAL;
+ goto unlock_mutex;
+ }
+
+ opp_volt = min(opp_volt, svsb->opp_dvolt[i]);
+ ret = dev_pm_opp_adjust_voltage(svsb->opp_dev,
+ svsb->opp_dfreq[i],
+ opp_volt, opp_volt,
+ svsb->opp_dvolt[i]);
+ if (ret) {
+ dev_err(svsb->dev, "set %uuV fail: %d\n",
+ opp_volt, ret);
+ goto unlock_mutex;
+ }
+ }
+
+unlock_mutex:
+ mutex_unlock(&svsb->lock);
+
+ return ret;
+}
+
+static int svs_dump_debug_show(struct seq_file *m, void *p)
+{
+ struct svs_platform *svsp = (struct svs_platform *)m->private;
+ struct svs_bank *svsb;
+ unsigned long svs_reg_addr;
+ u32 idx, i, j, bank_id;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse && svsp->efuse[i])
+ seq_printf(m, "M_HW_RES%d = 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ for (i = 0; i < svsp->tefuse_max; i++)
+ if (svsp->tefuse)
+ seq_printf(m, "THERMAL_EFUSE%d = 0x%08x\n",
+ i, svsp->tefuse[i]);
+
+ for (bank_id = 0, idx = 0; idx < svsp->bank_max; idx++, bank_id++) {
+ svsb = &svsp->banks[idx];
+
+ for (i = SVSB_PHASE_INIT01; i <= SVSB_PHASE_MON; i++) {
+ seq_printf(m, "Bank_number = %u\n", bank_id);
+
+ if (i == SVSB_PHASE_INIT01 || i == SVSB_PHASE_INIT02)
+ seq_printf(m, "mode = init%d\n", i);
+ else if (i == SVSB_PHASE_MON)
+ seq_puts(m, "mode = mon\n");
+ else
+ seq_puts(m, "mode = error\n");
+
+ for (j = DESCHAR; j < SVS_REG_MAX; j++) {
+ svs_reg_addr = (unsigned long)(svsp->base +
+ svsp->regs[j]);
+ seq_printf(m, "0x%08lx = 0x%08x\n",
+ svs_reg_addr, svsb->reg_data[i][j]);
+ }
+ }
+ }
+
+ return 0;
+}
+
+debug_fops_ro(dump);
+
+static int svs_enable_debug_show(struct seq_file *m, void *v)
+{
+ struct svs_bank *svsb = (struct svs_bank *)m->private;
+
+ switch (svsb->phase) {
+ case SVSB_PHASE_ERROR:
+ seq_puts(m, "disabled\n");
+ break;
+ case SVSB_PHASE_INIT01:
+ seq_puts(m, "init1\n");
+ break;
+ case SVSB_PHASE_INIT02:
+ seq_puts(m, "init2\n");
+ break;
+ case SVSB_PHASE_MON:
+ seq_puts(m, "mon mode\n");
+ break;
+ default:
+ seq_puts(m, "unknown\n");
+ break;
+ }
+
+ return 0;
+}
+
+static ssize_t svs_enable_debug_write(struct file *filp,
+ const char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ struct svs_bank *svsb = file_inode(filp)->i_private;
+ struct svs_platform *svsp = dev_get_drvdata(svsb->dev);
+ unsigned long flags;
+ int enabled, ret;
+ char *buf = NULL;
+
+ if (count >= PAGE_SIZE)
+ return -EINVAL;
+
+ buf = (char *)memdup_user_nul(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ ret = kstrtoint(buf, 10, &enabled);
+ if (ret)
+ return ret;
+
+ if (!enabled) {
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svsb->mode_support = SVSB_MODE_ALL_DISABLE;
+ svs_switch_bank(svsp);
+ svs_writel_relaxed(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_CLEAN, INTSTS);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_adjust_pm_opp_volts(svsb);
+ }
+
+ kfree(buf);
+
+ return count;
+}
+
+debug_fops_rw(enable);
+
+static int svs_status_debug_show(struct seq_file *m, void *v)
+{
+ struct svs_bank *svsb = (struct svs_bank *)m->private;
+ struct dev_pm_opp *opp;
+ int tzone_temp = 0, ret;
+ u32 i;
+
+ ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
+ if (ret)
+ seq_printf(m, "%s: temperature ignore, turn_pt = %u\n",
+ svsb->name, svsb->turn_pt);
+ else
+ seq_printf(m, "%s: temperature = %d, turn_pt = %u\n",
+ svsb->name, tzone_temp, svsb->turn_pt);
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
+ svsb->opp_dfreq[i], true);
+ if (IS_ERR(opp)) {
+ seq_printf(m, "%s: cannot find freq = %u (%ld)\n",
+ svsb->name, svsb->opp_dfreq[i],
+ PTR_ERR(opp));
+ return PTR_ERR(opp);
+ }
+
+ seq_printf(m, "opp_freq[%02u]: %u, opp_volt[%02u]: %lu, ",
+ i, svsb->opp_dfreq[i], i,
+ dev_pm_opp_get_voltage(opp));
+ seq_printf(m, "svsb_volt[%02u]: 0x%x, freq_pct[%02u]: %u\n",
+ i, svsb->volt[i], i, svsb->freq_pct[i]);
+ dev_pm_opp_put(opp);
+ }
+
+ return 0;
+}
+
+debug_fops_ro(status);
+
+static int svs_create_debug_cmds(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct dentry *svs_dir, *svsb_dir, *file_entry;
+ const char *d = "/sys/kernel/debug/svs";
+ u32 i, idx;
+
+ struct svs_dentry {
+ const char *name;
+ const struct file_operations *fops;
+ };
+
+ struct svs_dentry svs_entries[] = {
+ svs_dentry_data(dump),
+ };
+
+ struct svs_dentry svsb_entries[] = {
+ svs_dentry_data(enable),
+ svs_dentry_data(status),
+ };
+
+ svs_dir = debugfs_create_dir("svs", NULL);
+ if (IS_ERR(svs_dir)) {
+ dev_err(svsp->dev, "cannot create %s: %ld\n",
+ d, PTR_ERR(svs_dir));
+ return PTR_ERR(svs_dir);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(svs_entries); i++) {
+ file_entry = debugfs_create_file(svs_entries[i].name, 0664,
+ svs_dir, svsp,
+ svs_entries[i].fops);
+ if (IS_ERR(file_entry)) {
+ dev_err(svsp->dev, "cannot create %s/%s: %ld\n",
+ d, svs_entries[i].name, PTR_ERR(file_entry));
+ return PTR_ERR(file_entry);
+ }
+ }
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (svsb->mode_support == SVSB_MODE_ALL_DISABLE)
+ continue;
+
+ svsb_dir = debugfs_create_dir(svsb->name, svs_dir);
+ if (IS_ERR(svsb_dir)) {
+ dev_err(svsp->dev, "cannot create %s/%s: %ld\n",
+ d, svsb->name, PTR_ERR(svsb_dir));
+ return PTR_ERR(svsb_dir);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(svsb_entries); i++) {
+ file_entry = debugfs_create_file(svsb_entries[i].name,
+ 0664, svsb_dir, svsb,
+ svsb_entries[i].fops);
+ if (IS_ERR(file_entry)) {
+ dev_err(svsp->dev, "no %s/%s/%s?: %ld\n",
+ d, svsb->name, svsb_entries[i].name,
+ PTR_ERR(file_entry));
+ return PTR_ERR(file_entry);
+ }
+ }
+ }
+
+ return 0;
+}
+
+static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx)
+{
+ u32 vx;
+
+ if (v0 == v1 || f0 == f1)
+ return v0;
+
+ /* *100 to have decimal fraction factor */
+ vx = (v0 * 100) - ((((v0 - v1) * 100) / (f0 - f1)) * (f0 - fx));
+
+ return DIV_ROUND_UP(vx, 100);
+}
+
+static void svs_get_bank_volts_v3(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+ u32 i, j, *vop, vop74, vop30, turn_pt = svsb->turn_pt;
+ u32 b_sft, shift_byte = 0, opp_start = 0, opp_stop = 0;
+ u32 middle_index = (svsb->opp_count / 2);
+
+ if (svsb->phase == SVSB_PHASE_MON &&
+ svsb->volt_flags & SVSB_MON_VOLT_IGNORE)
+ return;
+
+ vop74 = svs_readl_relaxed(svsp, VOP74);
+ vop30 = svs_readl_relaxed(svsp, VOP30);
+
+ /* Target is to set svsb->volt[] by algorithm */
+ if (turn_pt < middle_index) {
+ if (svsb->type == SVSB_HIGH) {
+ /* volt[0] ~ volt[turn_pt - 1] */
+ for (i = 0; i < turn_pt; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ vop = (shift_byte < REG_BYTES) ? &vop30 :
+ &vop74;
+ svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0);
+ shift_byte++;
+ }
+ } else if (svsb->type == SVSB_LOW) {
+ /* volt[turn_pt] + volt[j] ~ volt[opp_count - 1] */
+ j = svsb->opp_count - 7;
+ svsb->volt[turn_pt] = vop30 & GENMASK(7, 0);
+ shift_byte++;
+ for (i = j; i < svsb->opp_count; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ vop = (shift_byte < REG_BYTES) ? &vop30 :
+ &vop74;
+ svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0);
+ shift_byte++;
+ }
+
+ /* volt[turn_pt + 1] ~ volt[j - 1] by interpolate */
+ for (i = turn_pt + 1; i < j; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[turn_pt],
+ svsb->freq_pct[j],
+ svsb->volt[turn_pt],
+ svsb->volt[j],
+ svsb->freq_pct[i]);
+ }
+ } else {
+ if (svsb->type == SVSB_HIGH) {
+ /* volt[0] + volt[j] ~ volt[turn_pt - 1] */
+ j = turn_pt - 7;
+ svsb->volt[0] = vop30 & GENMASK(7, 0);
+ shift_byte++;
+ for (i = j; i < turn_pt; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ vop = (shift_byte < REG_BYTES) ? &vop30 :
+ &vop74;
+ svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0);
+ shift_byte++;
+ }
+
+ /* volt[1] ~ volt[j - 1] by interpolate */
+ for (i = 1; i < j; i++)
+ svsb->volt[i] = interpolate(svsb->freq_pct[0],
+ svsb->freq_pct[j],
+ svsb->volt[0],
+ svsb->volt[j],
+ svsb->freq_pct[i]);
+ } else if (svsb->type == SVSB_LOW) {
+ /* volt[turn_pt] ~ volt[opp_count - 1] */
+ for (i = turn_pt; i < svsb->opp_count; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ vop = (shift_byte < REG_BYTES) ? &vop30 :
+ &vop74;
+ svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0);
+ shift_byte++;
+ }
+ }
+ }
+
+ if (svsb->type == SVSB_HIGH) {
+ opp_start = 0;
+ opp_stop = svsb->turn_pt;
+ } else if (svsb->type == SVSB_LOW) {
+ opp_start = svsb->turn_pt;
+ opp_stop = svsb->opp_count;
+ }
+
+ for (i = opp_start; i < opp_stop; i++)
+ if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT)
+ svsb->volt[i] -= svsb->dvt_fixed;
+}
+
+static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+ u32 i, j, *freq_pct, freq_pct74 = 0, freq_pct30 = 0;
+ u32 b_sft, shift_byte = 0, turn_pt;
+ u32 middle_index = (svsb->opp_count / 2);
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ if (svsb->opp_dfreq[i] <= svsb->turn_freq_base) {
+ svsb->turn_pt = i;
+ break;
+ }
+ }
+
+ turn_pt = svsb->turn_pt;
+
+ /* Target is to fill out freq_pct74 / freq_pct30 by algorithm */
+ if (turn_pt < middle_index) {
+ if (svsb->type == SVSB_HIGH) {
+ /*
+ * If we don't handle this situation,
+ * SVSB_HIGH's FREQPCT74 / FREQPCT30 would keep "0"
+ * and this leads SVSB_LOW to work abnormally.
+ */
+ if (turn_pt == 0)
+ freq_pct30 = svsb->freq_pct[0];
+
+ /* freq_pct[0] ~ freq_pct[turn_pt - 1] */
+ for (i = 0; i < turn_pt; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ freq_pct = (shift_byte < REG_BYTES) ?
+ &freq_pct30 : &freq_pct74;
+ *freq_pct |= (svsb->freq_pct[i] << b_sft);
+ shift_byte++;
+ }
+ } else if (svsb->type == SVSB_LOW) {
+ /*
+ * freq_pct[turn_pt] +
+ * freq_pct[opp_count - 7] ~ freq_pct[opp_count -1]
+ */
+ freq_pct30 = svsb->freq_pct[turn_pt];
+ shift_byte++;
+ j = svsb->opp_count - 7;
+ for (i = j; i < svsb->opp_count; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ freq_pct = (shift_byte < REG_BYTES) ?
+ &freq_pct30 : &freq_pct74;
+ *freq_pct |= (svsb->freq_pct[i] << b_sft);
+ shift_byte++;
+ }
+ }
+ } else {
+ if (svsb->type == SVSB_HIGH) {
+ /*
+ * freq_pct[0] +
+ * freq_pct[turn_pt - 7] ~ freq_pct[turn_pt - 1]
+ */
+ freq_pct30 = svsb->freq_pct[0];
+ shift_byte++;
+ j = turn_pt - 7;
+ for (i = j; i < turn_pt; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ freq_pct = (shift_byte < REG_BYTES) ?
+ &freq_pct30 : &freq_pct74;
+ *freq_pct |= (svsb->freq_pct[i] << b_sft);
+ shift_byte++;
+ }
+ } else if (svsb->type == SVSB_LOW) {
+ /* freq_pct[turn_pt] ~ freq_pct[opp_count - 1] */
+ for (i = turn_pt; i < svsb->opp_count; i++) {
+ b_sft = BITS8 * (shift_byte % REG_BYTES);
+ freq_pct = (shift_byte < REG_BYTES) ?
+ &freq_pct30 : &freq_pct74;
+ *freq_pct |= (svsb->freq_pct[i] << b_sft);
+ shift_byte++;
+ }
+ }
+ }
+
+ svs_writel_relaxed(svsp, freq_pct74, FREQPCT74);
+ svs_writel_relaxed(svsp, freq_pct30, FREQPCT30);
+}
+
+static void svs_get_bank_volts_v2(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+ u32 temp, i;
+
+ temp = svs_readl_relaxed(svsp, VOP74);
+ svsb->volt[14] = (temp >> 24) & GENMASK(7, 0);
+ svsb->volt[12] = (temp >> 16) & GENMASK(7, 0);
+ svsb->volt[10] = (temp >> 8) & GENMASK(7, 0);
+ svsb->volt[8] = (temp & GENMASK(7, 0));
+
+ temp = svs_readl_relaxed(svsp, VOP30);
+ svsb->volt[6] = (temp >> 24) & GENMASK(7, 0);
+ svsb->volt[4] = (temp >> 16) & GENMASK(7, 0);
+ svsb->volt[2] = (temp >> 8) & GENMASK(7, 0);
+ svsb->volt[0] = (temp & GENMASK(7, 0));
+
+ for (i = 0; i <= 12; i += 2)
+ svsb->volt[i + 1] = interpolate(svsb->freq_pct[i],
+ svsb->freq_pct[i + 2],
+ svsb->volt[i],
+ svsb->volt[i + 2],
+ svsb->freq_pct[i + 1]);
+
+ svsb->volt[15] = interpolate(svsb->freq_pct[12],
+ svsb->freq_pct[14],
+ svsb->volt[12],
+ svsb->volt[14],
+ svsb->freq_pct[15]);
+
+ for (i = 0; i < svsb->opp_count; i++)
+ svsb->volt[i] += svsb->volt_od;
+}
+
+static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ svs_writel_relaxed(svsp,
+ (svsb->freq_pct[14] << 24) |
+ (svsb->freq_pct[12] << 16) |
+ (svsb->freq_pct[10] << 8) |
+ svsb->freq_pct[8],
+ FREQPCT74);
+
+ svs_writel_relaxed(svsp,
+ (svsb->freq_pct[6] << 24) |
+ (svsb->freq_pct[4] << 16) |
+ (svsb->freq_pct[2] << 8) |
+ svsb->freq_pct[0],
+ FREQPCT30);
+}
+
+static void svs_set_bank_phase(struct svs_platform *svsp,
+ enum svsb_phase target_phase)
+{
+ struct svs_bank *svsb = svsp->pbank;
+ u32 des_char, temp_char, det_char, limit_vals, init2vals, ts_calcs;
+
+ svs_switch_bank(svsp);
+
+ des_char = (svsb->bdes << 8) | svsb->mdes;
+ svs_writel_relaxed(svsp, des_char, DESCHAR);
+
+ temp_char = (svsb->vco << 16) | (svsb->mtdes << 8) | svsb->dvt_fixed;
+ svs_writel_relaxed(svsp, temp_char, TEMPCHAR);
+
+ det_char = (svsb->dcbdet << 8) | svsb->dcmdet;
+ svs_writel_relaxed(svsp, det_char, DETCHAR);
+
+ svs_writel_relaxed(svsp, svsb->dc_config, DCCONFIG);
+ svs_writel_relaxed(svsp, svsb->age_config, AGECONFIG);
+ svs_writel_relaxed(svsp, SVSB_RUNCONFIG_DEFAULT, RUNCONFIG);
+
+ svsb->set_freq_pct(svsp);
+
+ limit_vals = (svsb->vmax << 24) | (svsb->vmin << 16) |
+ (SVSB_DTHI << 8) | SVSB_DTLO;
+ svs_writel_relaxed(svsp, limit_vals, LIMITVALS);
+
+ svs_writel_relaxed(svsp, SVSB_DET_WINDOW, DETWINDOW);
+ svs_writel_relaxed(svsp, SVSB_DET_MAX, CONFIG);
+ svs_writel_relaxed(svsp, svsb->chk_shift, CHKSHIFT);
+ svs_writel_relaxed(svsp, svsb->ctl0, CTL0);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_CLEAN, INTSTS);
+
+ switch (target_phase) {
+ case SVSB_PHASE_INIT01:
+ svs_writel_relaxed(svsp, svsb->vboot, VBOOT);
+ svs_writel_relaxed(svsp, SVSB_INTEN_INIT0x, INTEN);
+ svs_writel_relaxed(svsp, SVSB_EN_INIT01, SVSEN);
+ break;
+ case SVSB_PHASE_INIT02:
+ svs_writel_relaxed(svsp, SVSB_INTEN_INIT0x, INTEN);
+ init2vals = (svsb->age_voffset_in << 16) | svsb->dc_voffset_in;
+ svs_writel_relaxed(svsp, init2vals, INIT2VALS);
+ svs_writel_relaxed(svsp, SVSB_EN_INIT02, SVSEN);
+ break;
+ case SVSB_PHASE_MON:
+ ts_calcs = (svsb->bts << 12) | svsb->mts;
+ svs_writel_relaxed(svsp, ts_calcs, TSCALCS);
+ svs_writel_relaxed(svsp, SVSB_INTEN_MONVOPEN, INTEN);
+ svs_writel_relaxed(svsp, SVSB_EN_MON, SVSEN);
+ break;
+ default:
+ dev_err(svsb->dev, "requested unknown target phase: %u\n",
+ target_phase);
+ break;
+ }
+}
+
+static inline void svs_save_bank_register_data(struct svs_platform *svsp,
+ enum svsb_phase phase)
+{
+ struct svs_bank *svsb = svsp->pbank;
+ enum svs_reg_index rg_i;
+
+ for (rg_i = DESCHAR; rg_i < SVS_REG_MAX; rg_i++)
+ svsb->reg_data[phase][rg_i] = svs_readl_relaxed(svsp, rg_i);
+}
+
+static inline void svs_error_isr_handler(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ dev_err(svsb->dev, "%s: CORESEL = 0x%08x\n",
+ __func__, svs_readl_relaxed(svsp, CORESEL));
+ dev_err(svsb->dev, "SVSEN = 0x%08x, INTSTS = 0x%08x\n",
+ svs_readl_relaxed(svsp, SVSEN),
+ svs_readl_relaxed(svsp, INTSTS));
+ dev_err(svsb->dev, "SMSTATE0 = 0x%08x, SMSTATE1 = 0x%08x\n",
+ svs_readl_relaxed(svsp, SMSTATE0),
+ svs_readl_relaxed(svsp, SMSTATE1));
+ dev_err(svsb->dev, "TEMP = 0x%08x\n", svs_readl_relaxed(svsp, TEMP));
+
+ svs_save_bank_register_data(svsp, SVSB_PHASE_ERROR);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_writel_relaxed(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_CLEAN, INTSTS);
+}
+
+static inline void svs_init01_isr_handler(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ dev_info(svsb->dev, "%s: VDN74~30:0x%08x~0x%08x, DC:0x%08x\n",
+ __func__, svs_readl_relaxed(svsp, VDESIGN74),
+ svs_readl_relaxed(svsp, VDESIGN30),
+ svs_readl_relaxed(svsp, DCVALUES));
+
+ svs_save_bank_register_data(svsp, SVSB_PHASE_INIT01);
+
+ svsb->phase = SVSB_PHASE_INIT01;
+ svsb->dc_voffset_in = ~(svs_readl_relaxed(svsp, DCVALUES) &
+ GENMASK(15, 0)) + 1;
+ if (svsb->volt_flags & SVSB_INIT01_VOLT_IGNORE ||
+ (svsb->dc_voffset_in & SVSB_DC_SIGNED_BIT &&
+ svsb->volt_flags & SVSB_INIT01_VOLT_INC_ONLY))
+ svsb->dc_voffset_in = 0;
+
+ svsb->age_voffset_in = svs_readl_relaxed(svsp, AGEVALUES) &
+ GENMASK(15, 0);
+
+ svs_writel_relaxed(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_COMPLETE, INTSTS);
+ svsb->core_sel &= ~SVSB_DET_CLK_EN;
+}
+
+static inline void svs_init02_isr_handler(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ dev_info(svsb->dev, "%s: VOP74~30:0x%08x~0x%08x, DC:0x%08x\n",
+ __func__, svs_readl_relaxed(svsp, VOP74),
+ svs_readl_relaxed(svsp, VOP30),
+ svs_readl_relaxed(svsp, DCVALUES));
+
+ svs_save_bank_register_data(svsp, SVSB_PHASE_INIT02);
+
+ svsb->phase = SVSB_PHASE_INIT02;
+ svsb->get_volts(svsp);
+
+ svs_writel_relaxed(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_COMPLETE, INTSTS);
+}
+
+static inline void svs_mon_mode_isr_handler(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb = svsp->pbank;
+
+ svs_save_bank_register_data(svsp, SVSB_PHASE_MON);
+
+ svsb->phase = SVSB_PHASE_MON;
+ svsb->get_volts(svsp);
+
+ svsb->temp = svs_readl_relaxed(svsp, TEMP) & GENMASK(7, 0);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_MONVOP, INTSTS);
+}
+
+static irqreturn_t svs_isr(int irq, void *data)
+{
+ struct svs_platform *svsp = data;
+ struct svs_bank *svsb = NULL;
+ unsigned long flags;
+ u32 idx, int_sts, svs_en;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ WARN(!svsb, "%s: svsb(%s) is null", __func__, svsb->name);
+
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+
+ /* Find out which svs bank fires interrupt */
+ if (svsb->int_st & svs_readl_relaxed(svsp, INTST)) {
+ spin_unlock_irqrestore(&svs_lock, flags);
+ continue;
+ }
+
+ svs_switch_bank(svsp);
+ int_sts = svs_readl_relaxed(svsp, INTSTS);
+ svs_en = svs_readl_relaxed(svsp, SVSEN);
+
+ if (int_sts == SVSB_INTSTS_COMPLETE &&
+ svs_en == SVSB_EN_INIT01)
+ svs_init01_isr_handler(svsp);
+ else if (int_sts == SVSB_INTSTS_COMPLETE &&
+ svs_en == SVSB_EN_INIT02)
+ svs_init02_isr_handler(svsp);
+ else if (int_sts & SVSB_INTSTS_MONVOP)
+ svs_mon_mode_isr_handler(svsp);
+ else
+ svs_error_isr_handler(svsp);
+
+ spin_unlock_irqrestore(&svs_lock, flags);
+ break;
+ }
+
+ svs_adjust_pm_opp_volts(svsb);
+
+ if (svsb->phase == SVSB_PHASE_INIT01 ||
+ svsb->phase == SVSB_PHASE_INIT02)
+ complete(&svsb->init_completion);
+
+ return IRQ_HANDLED;
+}
+
+static int svs_init01(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ unsigned long flags, time_left;
+ bool search_done;
+ int ret = 0, r;
+ u32 opp_freq, opp_vboot, buck_volt, idx, i;
+
+ /* Keep CPUs' core power on for svs_init01 initialization */
+ cpuidle_pause_and_lock();
+
+ /* Svs bank init01 preparation - power enable */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT01))
+ continue;
+
+ ret = regulator_enable(svsb->buck);
+ if (ret) {
+ dev_err(svsb->dev, "%s enable fail: %d\n",
+ svsb->buck_name, ret);
+ goto svs_init01_resume_cpuidle;
+ }
+
+ /* Some buck doesn't support mode change. Show fail msg only */
+ ret = regulator_set_mode(svsb->buck, REGULATOR_MODE_FAST);
+ if (ret)
+ dev_notice(svsb->dev, "set fast mode fail: %d\n", ret);
+
+ if (svsb->volt_flags & SVSB_INIT01_PD_REQ) {
+ if (!pm_runtime_enabled(svsb->opp_dev)) {
+ pm_runtime_enable(svsb->opp_dev);
+ svsb->pm_runtime_enabled_count++;
+ }
+
+ ret = pm_runtime_get_sync(svsb->opp_dev);
+ if (ret < 0) {
+ dev_err(svsb->dev, "mtcmos on fail: %d\n", ret);
+ goto svs_init01_resume_cpuidle;
+ }
+ }
+ }
+
+ /*
+ * Svs bank init01 preparation - vboot voltage adjustment
+ * Sometimes two svs banks use the same buck. Therefore,
+ * we have to set each svs bank to target voltage(vboot) first.
+ */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT01))
+ continue;
+
+ /*
+ * Find the fastest freq that can be run at vboot and
+ * fix to that freq until svs_init01 is done.
+ */
+ search_done = false;
+ opp_vboot = svs_bank_volt_to_opp_volt(svsb->vboot,
+ svsb->volt_step,
+ svsb->volt_base);
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ opp_freq = svsb->opp_dfreq[i];
+ if (!search_done && svsb->opp_dvolt[i] <= opp_vboot) {
+ ret = dev_pm_opp_adjust_voltage(svsb->opp_dev,
+ opp_freq,
+ opp_vboot,
+ opp_vboot,
+ opp_vboot);
+ if (ret) {
+ dev_err(svsb->dev,
+ "set opp %uuV vboot fail: %d\n",
+ opp_vboot, ret);
+ goto svs_init01_finish;
+ }
+
+ search_done = true;
+ } else {
+ ret = dev_pm_opp_disable(svsb->opp_dev,
+ svsb->opp_dfreq[i]);
+ if (ret) {
+ dev_err(svsb->dev,
+ "opp %uHz disable fail: %d\n",
+ svsb->opp_dfreq[i], ret);
+ goto svs_init01_finish;
+ }
+ }
+ }
+ }
+
+ /* Svs bank init01 begins */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT01))
+ continue;
+
+ opp_vboot = svs_bank_volt_to_opp_volt(svsb->vboot,
+ svsb->volt_step,
+ svsb->volt_base);
+
+ buck_volt = regulator_get_voltage(svsb->buck);
+ if (buck_volt != opp_vboot) {
+ dev_err(svsb->dev,
+ "buck voltage: %uuV, expected vboot: %uuV\n",
+ buck_volt, opp_vboot);
+ ret = -EPERM;
+ goto svs_init01_finish;
+ }
+
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_set_bank_phase(svsp, SVSB_PHASE_INIT01);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ time_left = wait_for_completion_timeout(&svsb->init_completion,
+ msecs_to_jiffies(5000));
+ if (!time_left) {
+ dev_err(svsb->dev, "init01 completion timeout\n");
+ ret = -EBUSY;
+ goto svs_init01_finish;
+ }
+ }
+
+svs_init01_finish:
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT01))
+ continue;
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ r = dev_pm_opp_enable(svsb->opp_dev,
+ svsb->opp_dfreq[i]);
+ if (r)
+ dev_err(svsb->dev, "opp %uHz enable fail: %d\n",
+ svsb->opp_dfreq[i], r);
+ }
+
+ if (svsb->volt_flags & SVSB_INIT01_PD_REQ) {
+ r = pm_runtime_put_sync(svsb->opp_dev);
+ if (r)
+ dev_err(svsb->dev, "mtcmos off fail: %d\n", r);
+
+ if (svsb->pm_runtime_enabled_count > 0) {
+ pm_runtime_disable(svsb->opp_dev);
+ svsb->pm_runtime_enabled_count--;
+ }
+ }
+
+ r = regulator_set_mode(svsb->buck, REGULATOR_MODE_NORMAL);
+ if (r)
+ dev_notice(svsb->dev, "set normal mode fail: %d\n", r);
+
+ r = regulator_disable(svsb->buck);
+ if (r)
+ dev_err(svsb->dev, "%s disable fail: %d\n",
+ svsb->buck_name, r);
+ }
+
+svs_init01_resume_cpuidle:
+ cpuidle_resume_and_unlock();
+
+ return ret;
+}
+
+static int svs_init02(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ unsigned long flags, time_left;
+ u32 idx;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT02))
+ continue;
+
+ reinit_completion(&svsb->init_completion);
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_set_bank_phase(svsp, SVSB_PHASE_INIT02);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ time_left = wait_for_completion_timeout(&svsb->init_completion,
+ msecs_to_jiffies(5000));
+ if (!time_left) {
+ dev_err(svsb->dev, "init02 completion timeout\n");
+ return -EBUSY;
+ }
+ }
+
+ /*
+ * 2-line high/low bank update its corresponding opp voltages only.
+ * Therefore, we sync voltages from opp for high/low bank voltages
+ * consistency.
+ */
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_INIT02))
+ continue;
+
+ if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) {
+ if (svs_sync_bank_volts_from_opp(svsb)) {
+ dev_err(svsb->dev, "sync volt fail\n");
+ return -EPERM;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void svs_mon_mode(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ unsigned long flags;
+ u32 idx;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (!(svsb->mode_support & SVSB_MODE_MON))
+ continue;
+
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_set_bank_phase(svsp, SVSB_PHASE_MON);
+ spin_unlock_irqrestore(&svs_lock, flags);
+ }
+}
+
+static int svs_start(struct svs_platform *svsp)
+{
+ int ret;
+
+ ret = svs_init01(svsp);
+ if (ret)
+ return ret;
+
+ ret = svs_init02(svsp);
+ if (ret)
+ return ret;
+
+ svs_mon_mode(svsp);
+
+ return 0;
+}
+
+static int svs_suspend(struct device *dev)
+{
+ struct svs_platform *svsp = dev_get_drvdata(dev);
+ struct svs_bank *svsb;
+ unsigned long flags;
+ int ret;
+ u32 idx;
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ /* This might wait for svs_isr() process */
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_switch_bank(svsp);
+ svs_writel_relaxed(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_CLEAN, INTSTS);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_adjust_pm_opp_volts(svsb);
+ }
+
+ ret = reset_control_assert(svsp->rst);
+ if (ret) {
+ dev_err(svsp->dev, "cannot assert reset %d\n", ret);
+ return ret;
+ }
+
+ clk_disable_unprepare(svsp->main_clk);
+
+ return 0;
+}
+
+static int svs_resume(struct device *dev)
+{
+ struct svs_platform *svsp = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(svsp->main_clk);
+ if (ret) {
+ dev_err(svsp->dev, "cannot enable main_clk, disable svs\n");
+ return ret;
+ }
+
+ ret = reset_control_deassert(svsp->rst);
+ if (ret) {
+ dev_err(svsp->dev, "cannot deassert reset %d\n", ret);
+ goto out_of_resume;
+ }
+
+ ret = svs_init02(svsp);
+ if (ret)
+ goto out_of_resume;
+
+ svs_mon_mode(svsp);
+
+ return 0;
+
+out_of_resume:
+ clk_disable_unprepare(svsp->main_clk);
+ return ret;
+}
+
+static int svs_bank_resource_setup(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct dev_pm_opp *opp;
+ unsigned long freq;
+ int count, ret;
+ u32 idx, i;
+
+ dev_set_drvdata(svsp->dev, svsp);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ svsb->name = "SVSB_CPU_LITTLE";
+ break;
+ case SVSB_CPU_BIG:
+ svsb->name = "SVSB_CPU_BIG";
+ break;
+ case SVSB_CCI:
+ svsb->name = "SVSB_CCI";
+ break;
+ case SVSB_GPU:
+ if (svsb->type == SVSB_HIGH)
+ svsb->name = "SVSB_GPU_HIGH";
+ else if (svsb->type == SVSB_LOW)
+ svsb->name = "SVSB_GPU_LOW";
+ else
+ svsb->name = "SVSB_GPU";
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return -EINVAL;
+ }
+
+ svsb->dev = devm_kzalloc(svsp->dev, sizeof(*svsb->dev),
+ GFP_KERNEL);
+ if (!svsb->dev)
+ return -ENOMEM;
+
+ ret = dev_set_name(svsb->dev, "%s", svsb->name);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(svsb->dev, svsp);
+
+ ret = dev_pm_opp_of_add_table(svsb->opp_dev);
+ if (ret) {
+ dev_err(svsb->dev, "add opp table fail: %d\n", ret);
+ return ret;
+ }
+
+ mutex_init(&svsb->lock);
+ init_completion(&svsb->init_completion);
+
+ if (svsb->mode_support & SVSB_MODE_INIT01) {
+ svsb->buck = devm_regulator_get_optional(svsb->opp_dev,
+ svsb->buck_name);
+ if (IS_ERR(svsb->buck)) {
+ dev_err(svsb->dev, "cannot get \"%s-supply\"\n",
+ svsb->buck_name);
+ return PTR_ERR(svsb->buck);
+ }
+ }
+
+ if (svsb->mode_support & SVSB_MODE_MON) {
+ svsb->tzd = thermal_zone_get_zone_by_name(svsb->tzone_name);
+ if (IS_ERR(svsb->tzd)) {
+ dev_err(svsb->dev, "cannot get \"%s\" thermal zone\n",
+ svsb->tzone_name);
+ return PTR_ERR(svsb->tzd);
+ }
+ }
+
+ count = dev_pm_opp_get_opp_count(svsb->opp_dev);
+ if (svsb->opp_count != count) {
+ dev_err(svsb->dev,
+ "opp_count not \"%u\" but get \"%d\"?\n",
+ svsb->opp_count, count);
+ return count;
+ }
+
+ for (i = 0, freq = U32_MAX; i < svsb->opp_count; i++, freq--) {
+ opp = dev_pm_opp_find_freq_floor(svsb->opp_dev, &freq);
+ if (IS_ERR(opp)) {
+ dev_err(svsb->dev, "cannot find freq = %ld\n",
+ PTR_ERR(opp));
+ return PTR_ERR(opp);
+ }
+
+ svsb->opp_dfreq[i] = freq;
+ svsb->opp_dvolt[i] = dev_pm_opp_get_voltage(opp);
+ svsb->freq_pct[i] = percent(svsb->opp_dfreq[i],
+ svsb->freq_base);
+ dev_pm_opp_put(opp);
+ }
+ }
+
+ return 0;
+}
+
+static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct nvmem_cell *cell;
+ u32 idx, i, vmin, golden_temp;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[9]) {
+ dev_notice(svsp->dev, "svs_efuse[9] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ vmin = (svsp->efuse[19] >> 4) & GENMASK(1, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (vmin == 0x1)
+ svsb->vmin = 0x1e;
+
+ if (svsb->type == SVSB_LOW) {
+ svsb->mtdes = svsp->efuse[10] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[10] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[10] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[17]) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[17] >> 8) & GENMASK(7, 0);
+ } else if (svsb->type == SVSB_HIGH) {
+ svsb->mtdes = svsp->efuse[9] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[9] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[9] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[17] >> 24) & GENMASK(7, 0);
+ }
+
+ svsb->vmax += svsb->dvt_fixed;
+ }
+
+ /* Thermal efuse parsing */
+ cell = nvmem_cell_get(svsp->dev, "t-calibration-data");
+ if (IS_ERR_OR_NULL(cell)) {
+ dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n",
+ PTR_ERR(cell));
+ return false;
+ }
+
+ svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max);
+ if (IS_ERR(svsp->tefuse)) {
+ dev_err(svsp->dev, "cannot read thermal efuse: %ld\n",
+ PTR_ERR(svsp->tefuse));
+ nvmem_cell_put(cell);
+ return false;
+ }
+
+ svsp->tefuse_max /= sizeof(u32);
+ nvmem_cell_put(cell);
+
+ for (i = 0; i < svsp->tefuse_max; i++)
+ if (svsp->tefuse[i] != 0)
+ break;
+
+ if (i == svsp->tefuse_max)
+ golden_temp = 50; /* All thermal efuse data are 0 */
+ else
+ golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = 500;
+ svsb->bts = (((500 * golden_temp + 250460) / 1000) - 25) * 4;
+ }
+
+ return true;
+}
+
+static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct nvmem_cell *cell;
+ int format[6], x_roomt[6], o_vtsmcu[5], o_vtsabb, tb_roomt = 0;
+ int adc_ge_t, adc_oe_t, ge, oe, gain, degc_cali, adc_cali_en_t;
+ int o_slope, o_slope_sign, ts_id;
+ u32 idx, i, ft_pgm, mts, temp0, temp1, temp2;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[2]) {
+ dev_notice(svsp->dev, "svs_efuse[2] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ ft_pgm = (svsp->efuse[0] >> 4) & GENMASK(3, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (ft_pgm <= 1)
+ svsb->volt_flags |= SVSB_INIT01_VOLT_IGNORE;
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ svsb->bdes = svsp->efuse[16] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[16] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[16] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[16] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 10;
+ else
+ svsb->volt_od += 2;
+ break;
+ case SVSB_CPU_BIG:
+ svsb->bdes = svsp->efuse[18] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[18] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[18] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[18] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[17] & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 15;
+ else
+ svsb->volt_od += 12;
+ break;
+ case SVSB_CCI:
+ svsb->bdes = svsp->efuse[4] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[4] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 10;
+ else
+ svsb->volt_od += 2;
+ break;
+ case SVSB_GPU:
+ svsb->bdes = svsp->efuse[6] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[6] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[6] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[6] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
+
+ if (ft_pgm >= 2) {
+ svsb->freq_base = 800000000; /* 800MHz */
+ svsb->dvt_fixed = 2;
+ }
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return false;
+ }
+ }
+
+ /* Get thermal efuse by nvmem */
+ cell = nvmem_cell_get(svsp->dev, "t-calibration-data");
+ if (IS_ERR(cell)) {
+ dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n",
+ PTR_ERR(cell));
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max);
+ if (IS_ERR(svsp->tefuse)) {
+ dev_err(svsp->dev, "cannot read thermal efuse: %ld\n",
+ PTR_ERR(svsp->tefuse));
+ nvmem_cell_put(cell);
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ svsp->tefuse_max /= sizeof(u32);
+ nvmem_cell_put(cell);
+
+ /* Thermal efuse parsing */
+ adc_ge_t = (svsp->tefuse[1] >> 22) & GENMASK(9, 0);
+ adc_oe_t = (svsp->tefuse[1] >> 12) & GENMASK(9, 0);
+
+ o_vtsmcu[0] = (svsp->tefuse[0] >> 17) & GENMASK(8, 0);
+ o_vtsmcu[1] = (svsp->tefuse[0] >> 8) & GENMASK(8, 0);
+ o_vtsmcu[2] = svsp->tefuse[1] & GENMASK(8, 0);
+ o_vtsmcu[3] = (svsp->tefuse[2] >> 23) & GENMASK(8, 0);
+ o_vtsmcu[4] = (svsp->tefuse[2] >> 5) & GENMASK(8, 0);
+ o_vtsabb = (svsp->tefuse[2] >> 14) & GENMASK(8, 0);
+
+ degc_cali = (svsp->tefuse[0] >> 1) & GENMASK(5, 0);
+ adc_cali_en_t = svsp->tefuse[0] & BIT(0);
+ o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0);
+
+ ts_id = (svsp->tefuse[1] >> 9) & BIT(0);
+ o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
+
+ if (adc_cali_en_t == 1) {
+ if (!ts_id)
+ o_slope = 0;
+
+ if (adc_ge_t < 265 || adc_ge_t > 758 ||
+ adc_oe_t < 265 || adc_oe_t > 758 ||
+ o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
+ o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
+ o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
+ o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
+ o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
+ o_vtsabb < -8 || o_vtsabb > 484 ||
+ degc_cali < 1 || degc_cali > 63) {
+ dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
+ goto remove_mt8183_svsb_mon_mode;
+ }
+ } else {
+ dev_err(svsp->dev, "no thermal efuse, no mon mode\n");
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ ge = ((adc_ge_t - 512) * 10000) / 4096;
+ oe = (adc_oe_t - 512);
+ gain = (10000 + ge);
+
+ format[0] = (o_vtsmcu[0] + 3350 - oe);
+ format[1] = (o_vtsmcu[1] + 3350 - oe);
+ format[2] = (o_vtsmcu[2] + 3350 - oe);
+ format[3] = (o_vtsmcu[3] + 3350 - oe);
+ format[4] = (o_vtsmcu[4] + 3350 - oe);
+ format[5] = (o_vtsabb + 3350 - oe);
+
+ for (i = 0; i < 6; i++)
+ x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain;
+
+ temp0 = (10000 * 100000 / gain) * 15 / 18;
+
+ if (!o_slope_sign)
+ mts = (temp0 * 10) / (1534 + o_slope * 10);
+ else
+ mts = (temp0 * 10) / (1534 - o_slope * 10);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = mts;
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ tb_roomt = x_roomt[3];
+ break;
+ case SVSB_CPU_BIG:
+ tb_roomt = x_roomt[4];
+ break;
+ case SVSB_CCI:
+ tb_roomt = x_roomt[3];
+ break;
+ case SVSB_GPU:
+ tb_roomt = x_roomt[1];
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ temp0 = (degc_cali * 10 / 2);
+ temp1 = ((10000 * 100000 / 4096 / gain) *
+ oe + tb_roomt * 10) * 15 / 18;
+
+ if (!o_slope_sign)
+ temp2 = temp1 * 100 / (1534 + o_slope * 10);
+ else
+ temp2 = temp1 * 100 / (1534 - o_slope * 10);
+
+ svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
+ }
+
+ return true;
+
+remove_mt8183_svsb_mon_mode:
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mode_support &= ~SVSB_MODE_MON;
+ }
+
+ return true;
+}
+
+static bool svs_is_efuse_data_correct(struct svs_platform *svsp)
+{
+ struct nvmem_cell *cell;
+
+ /* Get svs efuse by nvmem */
+ cell = nvmem_cell_get(svsp->dev, "svs-calibration-data");
+ if (IS_ERR(cell)) {
+ dev_err(svsp->dev, "no \"svs-calibration-data\"? %ld\n",
+ PTR_ERR(cell));
+ return false;
+ }
+
+ svsp->efuse = nvmem_cell_read(cell, &svsp->efuse_max);
+ if (IS_ERR(svsp->efuse)) {
+ dev_err(svsp->dev, "cannot read svs efuse: %ld\n",
+ PTR_ERR(svsp->efuse));
+ nvmem_cell_put(cell);
+ return false;
+ }
+
+ svsp->efuse_max /= sizeof(u32);
+ nvmem_cell_put(cell);
+
+ return svsp->efuse_parsing(svsp);
+}
+
+static struct device *svs_get_subsys_device(struct svs_platform *svsp,
+ const char *node_name)
+{
+ struct platform_device *pdev;
+ struct device_node *np;
+
+ np = of_find_node_by_name(NULL, node_name);
+ if (!np) {
+ dev_err(svsp->dev, "cannot find %s node\n", node_name);
+ return ERR_PTR(-ENODEV);
+ }
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ of_node_put(np);
+ dev_err(svsp->dev, "cannot find pdev by %s\n", node_name);
+ return ERR_PTR(-ENXIO);
+ }
+
+ of_node_put(np);
+
+ return &pdev->dev;
+}
+
+static struct device *svs_add_device_link(struct svs_platform *svsp,
+ const char *node_name)
+{
+ struct device *dev;
+ struct device_link *sup_link;
+
+ if (!node_name) {
+ dev_err(svsp->dev, "node name cannot be null\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ dev = svs_get_subsys_device(svsp, node_name);
+ if (IS_ERR(dev))
+ return dev;
+
+ sup_link = device_link_add(svsp->dev, dev,
+ DL_FLAG_AUTOREMOVE_CONSUMER);
+ if (!sup_link) {
+ dev_err(svsp->dev, "sup_link is NULL\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (sup_link->supplier->links.status != DL_DEV_DRIVER_BOUND)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return dev;
+}
+
+static int svs_mt8192_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst");
+ if (IS_ERR(svsp->rst))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
+ "cannot get svs reset control\n");
+
+ dev = svs_add_device_link(svsp, "lvts");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get lvts device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (svsb->type == SVSB_HIGH)
+ svsb->opp_dev = svs_add_device_link(svsp, "mali");
+ else if (svsb->type == SVSB_LOW)
+ svsb->opp_dev = svs_get_subsys_device(svsp, "mali");
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
+
+static int svs_mt8183_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ dev = svs_add_device_link(svsp, "thermal");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get thermal device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ case SVSB_CPU_BIG:
+ svsb->opp_dev = get_cpu_device(svsb->cpu_id);
+ break;
+ case SVSB_CCI:
+ svsb->opp_dev = svs_add_device_link(svsp, "cci");
+ break;
+ case SVSB_GPU:
+ svsb->opp_dev = svs_add_device_link(svsp, "gpu");
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return -EINVAL;
+ }
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
+
+static struct svs_bank svs_mt8192_banks[] = {
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_LOW,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
+ .mode_support = SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 688000000,
+ .turn_freq_base = 688000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x60,
+ .vmin = 0x1a,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x1,
+ .vco = 0x18,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0100,
+ .int_st = BIT(0),
+ .ctl0 = 0x00540003,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_HIGH,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .tzone_name = "gpu1",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 902000000,
+ .turn_freq_base = 688000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x60,
+ .vmin = 0x1a,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x18,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0101,
+ .int_st = BIT(1),
+ .ctl0 = 0x00540003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
+ },
+};
+
+static struct svs_bank svs_mt8183_banks[] = {
+ {
+ .sw_id = SVSB_CPU_LITTLE,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 0,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1989000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x64,
+ .vmin = 0x18,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0000,
+ .int_st = BIT(0),
+ .ctl0 = 0x00010001,
+ },
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 4,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1989000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x58,
+ .vmin = 0x10,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0001,
+ .int_st = BIT(1),
+ .ctl0 = 0x00000001,
+ },
+ {
+ .sw_id = SVSB_CCI,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1196000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x64,
+ .vmin = 0x18,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0002,
+ .int_st = BIT(2),
+ .ctl0 = 0x00100003,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .buck_name = "mali",
+ .tzone_name = "tzts2",
+ .volt_flags = SVSB_INIT01_PD_REQ |
+ SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02 |
+ SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 900000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x40,
+ .vmin = 0x14,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x3,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0003,
+ .int_st = BIT(3),
+ .ctl0 = 0x00050001,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 3,
+ },
+};
+
+static const struct svs_platform_data svs_mt8192_platform_data = {
+ .name = "mt8192-svs",
+ .banks = svs_mt8192_banks,
+ .efuse_parsing = svs_mt8192_efuse_parsing,
+ .probe = svs_mt8192_platform_probe,
+ .irqflags = IRQF_TRIGGER_HIGH,
+ .regs = svs_regs_v2,
+ .bank_max = ARRAY_SIZE(svs_mt8192_banks),
+};
+
+static const struct svs_platform_data svs_mt8183_platform_data = {
+ .name = "mt8183-svs",
+ .banks = svs_mt8183_banks,
+ .efuse_parsing = svs_mt8183_efuse_parsing,
+ .probe = svs_mt8183_platform_probe,
+ .irqflags = IRQF_TRIGGER_LOW,
+ .regs = svs_regs_v2,
+ .bank_max = ARRAY_SIZE(svs_mt8183_banks),
+};
+
+static const struct of_device_id svs_of_match[] = {
+ {
+ .compatible = "mediatek,mt8192-svs",
+ .data = &svs_mt8192_platform_data,
+ }, {
+ .compatible = "mediatek,mt8183-svs",
+ .data = &svs_mt8183_platform_data,
+ }, {
+ /* Sentinel */
+ },
+};
+
+static struct svs_platform *svs_platform_probe(struct platform_device *pdev)
+{
+ struct svs_platform *svsp;
+ const struct svs_platform_data *svsp_data;
+ int ret;
+
+ svsp_data = of_device_get_match_data(&pdev->dev);
+ if (!svsp_data) {
+ dev_err(&pdev->dev, "no svs platform data?\n");
+ return ERR_PTR(-EPERM);
+ }
+
+ svsp = devm_kzalloc(&pdev->dev, sizeof(*svsp), GFP_KERNEL);
+ if (!svsp)
+ return ERR_PTR(-ENOMEM);
+
+ svsp->dev = &pdev->dev;
+ svsp->name = svsp_data->name;
+ svsp->banks = svsp_data->banks;
+ svsp->efuse_parsing = svsp_data->efuse_parsing;
+ svsp->probe = svsp_data->probe;
+ svsp->irqflags = svsp_data->irqflags;
+ svsp->regs = svsp_data->regs;
+ svsp->bank_max = svsp_data->bank_max;
+
+ ret = svsp->probe(svsp);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return svsp;
+}
+
+static int svs_probe(struct platform_device *pdev)
+{
+ struct svs_platform *svsp;
+ unsigned int svsp_irq;
+ int ret;
+
+ svsp = svs_platform_probe(pdev);
+ if (IS_ERR(svsp))
+ return PTR_ERR(svsp);
+
+ if (!svs_is_efuse_data_correct(svsp)) {
+ dev_notice(svsp->dev, "efuse data isn't correct\n");
+ ret = -EPERM;
+ goto svs_probe_free_resource;
+ }
+
+ ret = svs_bank_resource_setup(svsp);
+ if (ret) {
+ dev_err(svsp->dev, "svs bank resource setup fail: %d\n", ret);
+ goto svs_probe_free_resource;
+ }
+
+ svsp_irq = irq_of_parse_and_map(svsp->dev->of_node, 0);
+ ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr,
+ svsp->irqflags | IRQF_ONESHOT,
+ svsp->name, svsp);
+ if (ret) {
+ dev_err(svsp->dev, "register irq(%d) failed: %d\n",
+ svsp_irq, ret);
+ goto svs_probe_free_resource;
+ }
+
+ svsp->main_clk = devm_clk_get(svsp->dev, "main");
+ if (IS_ERR(svsp->main_clk)) {
+ dev_err(svsp->dev, "failed to get clock: %ld\n",
+ PTR_ERR(svsp->main_clk));
+ ret = PTR_ERR(svsp->main_clk);
+ goto svs_probe_free_resource;
+ }
+
+ ret = clk_prepare_enable(svsp->main_clk);
+ if (ret) {
+ dev_err(svsp->dev, "cannot enable main clk: %d\n", ret);
+ goto svs_probe_free_resource;
+ }
+
+ svsp->base = of_iomap(svsp->dev->of_node, 0);
+ if (IS_ERR_OR_NULL(svsp->base)) {
+ dev_err(svsp->dev, "cannot find svs register base\n");
+ ret = -EINVAL;
+ goto svs_probe_clk_disable;
+ }
+
+ ret = svs_start(svsp);
+ if (ret) {
+ dev_err(svsp->dev, "svs start fail: %d\n", ret);
+ goto svs_probe_iounmap;
+ }
+
+ ret = svs_create_debug_cmds(svsp);
+ if (ret) {
+ dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret);
+ goto svs_probe_iounmap;
+ }
+
+ return 0;
+
+svs_probe_iounmap:
+ iounmap(svsp->base);
+
+svs_probe_clk_disable:
+ clk_disable_unprepare(svsp->main_clk);
+
+svs_probe_free_resource:
+ if (!IS_ERR_OR_NULL(svsp->efuse))
+ kfree(svsp->efuse);
+ if (!IS_ERR_OR_NULL(svsp->tefuse))
+ kfree(svsp->tefuse);
+
+ return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(svs_pm_ops, svs_suspend, svs_resume);
+
+static struct platform_driver svs_driver = {
+ .probe = svs_probe,
+ .driver = {
+ .name = "mtk-svs",
+ .pm = &svs_pm_ops,
+ .of_match_table = of_match_ptr(svs_of_match),
+ },
+};
+
+module_platform_driver(svs_driver);
+
+MODULE_AUTHOR("Roger Lu <roger.lu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SVS driver");
+MODULE_LICENSE("GPL");
config QCOM_RPMPD
tristate "Qualcomm RPM Power domain driver"
+ depends on PM
depends on QCOM_SMD_RPM
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
help
QCOM RPM Power domain driver to support power-domains with
performance states. The driver communicates a performance state
application processor and QDSP6. APR is
used by audio driver to configure QDSP6
ASM, ADM and AFE modules.
+
+config QCOM_ICC_BWMON
+ tristate "QCOM Interconnect Bandwidth Monitor driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select PM_OPP
+ help
+ Sets up driver monitoring bandwidth on various interconnects and
+ based on that voting for interconnect bandwidth, adjusting their
+ speed to current demand.
+ Current implementation brings support for BWMON v4, used for example
+ on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last
+ Level Cache (memnoc). Usage of this BWMON allows to remove some of
+ the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high
+ memory throughput even with lower CPU frequencies.
+
endmenu
obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
+obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o
static void apr_device_remove(struct device *dev)
{
struct apr_device *adev = to_apr_device(dev);
- struct apr_driver *adrv;
+ struct apr_driver *adrv = to_apr_driver(dev->driver);
struct packet_router *apr = dev_get_drvdata(adev->dev.parent);
- if (dev->driver) {
- adrv = to_apr_driver(dev->driver);
- if (adrv->remove)
- adrv->remove(adev);
- spin_lock(&apr->svcs_lock);
- idr_remove(&apr->svcs_idr, adev->svc.id);
- spin_unlock(&apr->svcs_lock);
- }
+ if (adrv->remove)
+ adrv->remove(adev);
+ spin_lock(&apr->svcs_lock);
+ idr_remove(&apr->svcs_idr, adev->svc.id);
+ spin_unlock(&apr->svcs_lock);
}
static int apr_uevent(struct device *dev, struct kobj_uevent_env *env)
const struct rsc_hdr *rsc_hdr;
const struct entry_header *ent;
int ret, i, j;
- u8 query[8];
+ u8 query[sizeof(ent->id)] __nonstring;
ret = cmd_db_ready();
if (ret)
return ret;
- /* Pad out query string to same length as in DB */
+ /*
+ * Pad out query string to same length as in DB. NOTE: the output
+ * query string is not necessarily '\0' terminated if it bumps up
+ * against the max size. That's OK and expected.
+ */
strncpy(query, id, sizeof(query));
for (i = 0; i < MAX_SLV_ID; i++) {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2021-2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, based on
+ * previous work of Thara Gopinath and msm-4.9 downstream sources.
+ */
+#include <linux/interconnect.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/sizes.h>
+
+/*
+ * The BWMON samples data throughput within 'sample_ms' time. With three
+ * configurable thresholds (Low, Medium and High) gives four windows (called
+ * zones) of current bandwidth:
+ *
+ * Zone 0: byte count < THRES_LO
+ * Zone 1: THRES_LO < byte count < THRES_MED
+ * Zone 2: THRES_MED < byte count < THRES_HIGH
+ * Zone 3: THRES_HIGH < byte count
+ *
+ * Zones 0 and 2 are not used by this driver.
+ */
+
+/* Internal sampling clock frequency */
+#define HW_TIMER_HZ 19200000
+
+#define BWMON_GLOBAL_IRQ_STATUS 0x0
+#define BWMON_GLOBAL_IRQ_CLEAR 0x8
+#define BWMON_GLOBAL_IRQ_ENABLE 0xc
+#define BWMON_GLOBAL_IRQ_ENABLE_ENABLE BIT(0)
+
+#define BWMON_IRQ_STATUS 0x100
+#define BWMON_IRQ_STATUS_ZONE_SHIFT 4
+#define BWMON_IRQ_CLEAR 0x108
+#define BWMON_IRQ_ENABLE 0x10c
+#define BWMON_IRQ_ENABLE_ZONE1_SHIFT 5
+#define BWMON_IRQ_ENABLE_ZONE2_SHIFT 6
+#define BWMON_IRQ_ENABLE_ZONE3_SHIFT 7
+#define BWMON_IRQ_ENABLE_MASK (BIT(BWMON_IRQ_ENABLE_ZONE1_SHIFT) | \
+ BIT(BWMON_IRQ_ENABLE_ZONE3_SHIFT))
+
+#define BWMON_ENABLE 0x2a0
+#define BWMON_ENABLE_ENABLE BIT(0)
+
+#define BWMON_CLEAR 0x2a4
+#define BWMON_CLEAR_CLEAR BIT(0)
+
+#define BWMON_SAMPLE_WINDOW 0x2a8
+#define BWMON_THRESHOLD_HIGH 0x2ac
+#define BWMON_THRESHOLD_MED 0x2b0
+#define BWMON_THRESHOLD_LOW 0x2b4
+
+#define BWMON_ZONE_ACTIONS 0x2b8
+/*
+ * Actions to perform on some zone 'z' when current zone hits the threshold:
+ * Increment counter of zone 'z'
+ */
+#define BWMON_ZONE_ACTIONS_INCREMENT(z) (0x2 << ((z) * 2))
+/* Clear counter of zone 'z' */
+#define BWMON_ZONE_ACTIONS_CLEAR(z) (0x1 << ((z) * 2))
+
+/* Zone 0 threshold hit: Clear zone count */
+#define BWMON_ZONE_ACTIONS_ZONE0 (BWMON_ZONE_ACTIONS_CLEAR(0))
+
+/* Zone 1 threshold hit: Increment zone count & clear lower zones */
+#define BWMON_ZONE_ACTIONS_ZONE1 (BWMON_ZONE_ACTIONS_INCREMENT(1) | \
+ BWMON_ZONE_ACTIONS_CLEAR(0))
+
+/* Zone 2 threshold hit: Increment zone count & clear lower zones */
+#define BWMON_ZONE_ACTIONS_ZONE2 (BWMON_ZONE_ACTIONS_INCREMENT(2) | \
+ BWMON_ZONE_ACTIONS_CLEAR(1) | \
+ BWMON_ZONE_ACTIONS_CLEAR(0))
+
+/* Zone 3 threshold hit: Increment zone count & clear lower zones */
+#define BWMON_ZONE_ACTIONS_ZONE3 (BWMON_ZONE_ACTIONS_INCREMENT(3) | \
+ BWMON_ZONE_ACTIONS_CLEAR(2) | \
+ BWMON_ZONE_ACTIONS_CLEAR(1) | \
+ BWMON_ZONE_ACTIONS_CLEAR(0))
+/* Value for BWMON_ZONE_ACTIONS */
+#define BWMON_ZONE_ACTIONS_DEFAULT (BWMON_ZONE_ACTIONS_ZONE0 | \
+ BWMON_ZONE_ACTIONS_ZONE1 << 8 | \
+ BWMON_ZONE_ACTIONS_ZONE2 << 16 | \
+ BWMON_ZONE_ACTIONS_ZONE3 << 24)
+
+/*
+ * There is no clear documentation/explanation of BWMON_THRESHOLD_COUNT
+ * register. Based on observations, this is number of times one threshold has to
+ * be reached, to trigger interrupt in given zone.
+ *
+ * 0xff are maximum values meant to ignore the zones 0 and 2.
+ */
+#define BWMON_THRESHOLD_COUNT 0x2bc
+#define BWMON_THRESHOLD_COUNT_ZONE1_SHIFT 8
+#define BWMON_THRESHOLD_COUNT_ZONE2_SHIFT 16
+#define BWMON_THRESHOLD_COUNT_ZONE3_SHIFT 24
+#define BWMON_THRESHOLD_COUNT_ZONE0_DEFAULT 0xff
+#define BWMON_THRESHOLD_COUNT_ZONE2_DEFAULT 0xff
+
+/* BWMONv4 count registers use count unit of 64 kB */
+#define BWMON_COUNT_UNIT_KB 64
+#define BWMON_ZONE_COUNT 0x2d8
+#define BWMON_ZONE_MAX(zone) (0x2e0 + 4 * (zone))
+
+struct icc_bwmon_data {
+ unsigned int sample_ms;
+ unsigned int default_highbw_kbps;
+ unsigned int default_medbw_kbps;
+ unsigned int default_lowbw_kbps;
+ u8 zone1_thres_count;
+ u8 zone3_thres_count;
+};
+
+struct icc_bwmon {
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+
+ unsigned int default_lowbw_kbps;
+ unsigned int sample_ms;
+ unsigned int max_bw_kbps;
+ unsigned int min_bw_kbps;
+ unsigned int target_kbps;
+ unsigned int current_kbps;
+};
+
+static void bwmon_clear_counters(struct icc_bwmon *bwmon)
+{
+ /*
+ * Clear counters. The order and barriers are
+ * important. Quoting downstream Qualcomm msm-4.9 tree:
+ *
+ * The counter clear and IRQ clear bits are not in the same 4KB
+ * region. So, we need to make sure the counter clear is completed
+ * before we try to clear the IRQ or do any other counter operations.
+ */
+ writel(BWMON_CLEAR_CLEAR, bwmon->base + BWMON_CLEAR);
+}
+
+static void bwmon_clear_irq(struct icc_bwmon *bwmon)
+{
+ /*
+ * Clear zone and global interrupts. The order and barriers are
+ * important. Quoting downstream Qualcomm msm-4.9 tree:
+ *
+ * Synchronize the local interrupt clear in mon_irq_clear()
+ * with the global interrupt clear here. Otherwise, the CPU
+ * may reorder the two writes and clear the global interrupt
+ * before the local interrupt, causing the global interrupt
+ * to be retriggered by the local interrupt still being high.
+ *
+ * Similarly, because the global registers are in a different
+ * region than the local registers, we need to ensure any register
+ * writes to enable the monitor after this call are ordered with the
+ * clearing here so that local writes don't happen before the
+ * interrupt is cleared.
+ */
+ writel(BWMON_IRQ_ENABLE_MASK, bwmon->base + BWMON_IRQ_CLEAR);
+ writel(BIT(0), bwmon->base + BWMON_GLOBAL_IRQ_CLEAR);
+}
+
+static void bwmon_disable(struct icc_bwmon *bwmon)
+{
+ /* Disable interrupts. Strict ordering, see bwmon_clear_irq(). */
+ writel(0x0, bwmon->base + BWMON_GLOBAL_IRQ_ENABLE);
+ writel(0x0, bwmon->base + BWMON_IRQ_ENABLE);
+
+ /*
+ * Disable bwmon. Must happen before bwmon_clear_irq() to avoid spurious
+ * IRQ.
+ */
+ writel(0x0, bwmon->base + BWMON_ENABLE);
+}
+
+static void bwmon_enable(struct icc_bwmon *bwmon, unsigned int irq_enable)
+{
+ /* Enable interrupts */
+ writel(BWMON_GLOBAL_IRQ_ENABLE_ENABLE,
+ bwmon->base + BWMON_GLOBAL_IRQ_ENABLE);
+ writel(irq_enable, bwmon->base + BWMON_IRQ_ENABLE);
+
+ /* Enable bwmon */
+ writel(BWMON_ENABLE_ENABLE, bwmon->base + BWMON_ENABLE);
+}
+
+static unsigned int bwmon_kbps_to_count(unsigned int kbps)
+{
+ return kbps / BWMON_COUNT_UNIT_KB;
+}
+
+static void bwmon_set_threshold(struct icc_bwmon *bwmon, unsigned int reg,
+ unsigned int kbps)
+{
+ unsigned int thres;
+
+ thres = mult_frac(bwmon_kbps_to_count(kbps), bwmon->sample_ms,
+ MSEC_PER_SEC);
+ writel_relaxed(thres, bwmon->base + reg);
+}
+
+static void bwmon_start(struct icc_bwmon *bwmon,
+ const struct icc_bwmon_data *data)
+{
+ unsigned int thres_count;
+ int window;
+
+ bwmon_clear_counters(bwmon);
+
+ window = mult_frac(bwmon->sample_ms, HW_TIMER_HZ, MSEC_PER_SEC);
+ /* Maximum sampling window: 0xfffff */
+ writel_relaxed(window, bwmon->base + BWMON_SAMPLE_WINDOW);
+
+ bwmon_set_threshold(bwmon, BWMON_THRESHOLD_HIGH,
+ data->default_highbw_kbps);
+ bwmon_set_threshold(bwmon, BWMON_THRESHOLD_MED,
+ data->default_medbw_kbps);
+ bwmon_set_threshold(bwmon, BWMON_THRESHOLD_LOW,
+ data->default_lowbw_kbps);
+
+ thres_count = data->zone3_thres_count << BWMON_THRESHOLD_COUNT_ZONE3_SHIFT |
+ BWMON_THRESHOLD_COUNT_ZONE2_DEFAULT << BWMON_THRESHOLD_COUNT_ZONE2_SHIFT |
+ data->zone1_thres_count << BWMON_THRESHOLD_COUNT_ZONE1_SHIFT |
+ BWMON_THRESHOLD_COUNT_ZONE0_DEFAULT;
+ writel_relaxed(thres_count, bwmon->base + BWMON_THRESHOLD_COUNT);
+ writel_relaxed(BWMON_ZONE_ACTIONS_DEFAULT,
+ bwmon->base + BWMON_ZONE_ACTIONS);
+ /* Write barriers in bwmon_clear_irq() */
+
+ bwmon_clear_irq(bwmon);
+ bwmon_enable(bwmon, BWMON_IRQ_ENABLE_MASK);
+}
+
+static irqreturn_t bwmon_intr(int irq, void *dev_id)
+{
+ struct icc_bwmon *bwmon = dev_id;
+ unsigned int status, max;
+ int zone;
+
+ status = readl(bwmon->base + BWMON_IRQ_STATUS);
+ status &= BWMON_IRQ_ENABLE_MASK;
+ if (!status) {
+ /*
+ * Only zone 1 and zone 3 interrupts are enabled but zone 2
+ * threshold could be hit and trigger interrupt even if not
+ * enabled.
+ * Such spurious interrupt might come with valuable max count or
+ * not, so solution would be to always check all
+ * BWMON_ZONE_MAX() registers to find the highest value.
+ * Such case is currently ignored.
+ */
+ return IRQ_NONE;
+ }
+
+ bwmon_disable(bwmon);
+
+ zone = get_bitmask_order(status >> BWMON_IRQ_STATUS_ZONE_SHIFT) - 1;
+ /*
+ * Zone max bytes count register returns count units within sampling
+ * window. Downstream kernel for BWMONv4 (called BWMON type 2 in
+ * downstream) always increments the max bytes count by one.
+ */
+ max = readl(bwmon->base + BWMON_ZONE_MAX(zone)) + 1;
+ max *= BWMON_COUNT_UNIT_KB;
+ bwmon->target_kbps = mult_frac(max, MSEC_PER_SEC, bwmon->sample_ms);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t bwmon_intr_thread(int irq, void *dev_id)
+{
+ struct icc_bwmon *bwmon = dev_id;
+ unsigned int irq_enable = 0;
+ struct dev_pm_opp *opp, *target_opp;
+ unsigned int bw_kbps, up_kbps, down_kbps;
+
+ bw_kbps = bwmon->target_kbps;
+
+ target_opp = dev_pm_opp_find_bw_ceil(bwmon->dev, &bw_kbps, 0);
+ if (IS_ERR(target_opp) && PTR_ERR(target_opp) == -ERANGE)
+ target_opp = dev_pm_opp_find_bw_floor(bwmon->dev, &bw_kbps, 0);
+
+ bwmon->target_kbps = bw_kbps;
+
+ bw_kbps--;
+ opp = dev_pm_opp_find_bw_floor(bwmon->dev, &bw_kbps, 0);
+ if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+ down_kbps = bwmon->target_kbps;
+ else
+ down_kbps = bw_kbps;
+
+ up_kbps = bwmon->target_kbps + 1;
+
+ if (bwmon->target_kbps >= bwmon->max_bw_kbps)
+ irq_enable = BIT(BWMON_IRQ_ENABLE_ZONE1_SHIFT);
+ else if (bwmon->target_kbps <= bwmon->min_bw_kbps)
+ irq_enable = BIT(BWMON_IRQ_ENABLE_ZONE3_SHIFT);
+ else
+ irq_enable = BWMON_IRQ_ENABLE_MASK;
+
+ bwmon_set_threshold(bwmon, BWMON_THRESHOLD_HIGH, up_kbps);
+ bwmon_set_threshold(bwmon, BWMON_THRESHOLD_MED, down_kbps);
+ /* Write barriers in bwmon_clear_counters() */
+ bwmon_clear_counters(bwmon);
+ bwmon_clear_irq(bwmon);
+ bwmon_enable(bwmon, irq_enable);
+
+ if (bwmon->target_kbps == bwmon->current_kbps)
+ goto out;
+
+ dev_pm_opp_set_opp(bwmon->dev, target_opp);
+ bwmon->current_kbps = bwmon->target_kbps;
+
+out:
+ dev_pm_opp_put(target_opp);
+ if (!IS_ERR(opp))
+ dev_pm_opp_put(opp);
+
+ return IRQ_HANDLED;
+}
+
+static int bwmon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dev_pm_opp *opp;
+ struct icc_bwmon *bwmon;
+ const struct icc_bwmon_data *data;
+ int ret;
+
+ bwmon = devm_kzalloc(dev, sizeof(*bwmon), GFP_KERNEL);
+ if (!bwmon)
+ return -ENOMEM;
+
+ data = of_device_get_match_data(dev);
+
+ bwmon->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(bwmon->base)) {
+ dev_err(dev, "failed to map bwmon registers\n");
+ return PTR_ERR(bwmon->base);
+ }
+
+ bwmon->irq = platform_get_irq(pdev, 0);
+ if (bwmon->irq < 0)
+ return bwmon->irq;
+
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add OPP table\n");
+
+ bwmon->max_bw_kbps = UINT_MAX;
+ opp = dev_pm_opp_find_bw_floor(dev, &bwmon->max_bw_kbps, 0);
+ if (IS_ERR(opp))
+ return dev_err_probe(dev, ret, "failed to find max peak bandwidth\n");
+
+ bwmon->min_bw_kbps = 0;
+ opp = dev_pm_opp_find_bw_ceil(dev, &bwmon->min_bw_kbps, 0);
+ if (IS_ERR(opp))
+ return dev_err_probe(dev, ret, "failed to find min peak bandwidth\n");
+
+ bwmon->sample_ms = data->sample_ms;
+ bwmon->default_lowbw_kbps = data->default_lowbw_kbps;
+ bwmon->dev = dev;
+
+ bwmon_disable(bwmon);
+ ret = devm_request_threaded_irq(dev, bwmon->irq, bwmon_intr,
+ bwmon_intr_thread,
+ IRQF_ONESHOT, dev_name(dev), bwmon);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to request IRQ\n");
+
+ platform_set_drvdata(pdev, bwmon);
+ bwmon_start(bwmon, data);
+
+ return 0;
+}
+
+static int bwmon_remove(struct platform_device *pdev)
+{
+ struct icc_bwmon *bwmon = platform_get_drvdata(pdev);
+
+ bwmon_disable(bwmon);
+
+ return 0;
+}
+
+/* BWMON v4 */
+static const struct icc_bwmon_data msm8998_bwmon_data = {
+ .sample_ms = 4,
+ .default_highbw_kbps = 4800 * 1024, /* 4.8 GBps */
+ .default_medbw_kbps = 512 * 1024, /* 512 MBps */
+ .default_lowbw_kbps = 0,
+ .zone1_thres_count = 16,
+ .zone3_thres_count = 1,
+};
+
+static const struct of_device_id bwmon_of_match[] = {
+ { .compatible = "qcom,msm8998-bwmon", .data = &msm8998_bwmon_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bwmon_of_match);
+
+static struct platform_driver bwmon_driver = {
+ .probe = bwmon_probe,
+ .remove = bwmon_remove,
+ .driver = {
+ .name = "qcom-bwmon",
+ .of_match_table = bwmon_of_match,
+ },
+};
+module_platform_driver(bwmon_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>");
+MODULE_DESCRIPTION("QCOM BWMON driver");
+MODULE_LICENSE("GPL");
* llcc_slice_getd - get llcc slice descriptor
* @uid: usecase_id for the client
*
- * A pointer to llcc slice descriptor will be returned on success and
+ * A pointer to llcc slice descriptor will be returned on success
* and error pointer is returned on failure
*/
struct llcc_slice_desc *llcc_slice_getd(u32 uid)
* qcom_mdt_read_metadata() - read header and metadata from mdt or mbn
* @fw: firmware of mdt header or mbn
* @data_len: length of the read metadata blob
+ * @fw_name: name of the firmware, for construction of segment file names
+ * @dev: device handle to associate resources with
*
* The mechanism that performs the authentication of the loading firmware
* expects an ELF header directly followed by the segment of hashes, with no
* qcom_mdt_pas_init() - initialize PAS region for firmware loading
* @dev: device handle to associate resources with
* @fw: firmware object for the mdt file
- * @firmware: name of the firmware, for construction of segment file names
+ * @fw_name: name of the firmware, for construction of segment file names
* @pas_id: PAS identifier
* @mem_phys: physical address of allocated memory region
* @ctx: PAS metadata context, to be released by caller
devnode = of_parse_phandle(dev->of_node, "sram", 0);
if (!devnode || !devnode->parent) {
dev_err(dev, "Cannot look up sram phandle\n");
+ of_node_put(devnode);
return ERR_PTR(-ENODEV);
}
pdev = of_find_device_by_node(devnode->parent);
if (!pdev) {
dev_err(dev, "Cannot find device node %s\n", devnode->name);
+ of_node_put(devnode);
return ERR_PTR(-EPROBE_DEFER);
}
+ of_node_put(devnode);
ocmem = platform_get_drvdata(pdev);
if (!ocmem) {
continue;
ret = qmp_cooling_device_add(qmp, &qmp->cooling_devs[count++],
child);
- if (ret)
+ if (ret) {
+ of_node_put(child);
goto unroll;
+ }
}
if (!count)
/**
* struct rpmhpd - top level RPMh power domain resource data structure
* @dev: rpmh power domain controller device
- * @pd: generic_pm_domain corrresponding to the power domain
- * @parent: generic_pm_domain corrresponding to the parent's power domain
+ * @pd: generic_pm_domain corresponding to the power domain
+ * @parent: generic_pm_domain corresponding to the parent's power domain
* @peer: A peer power domain in case Active only Voting is
* supported
* @active_only: True if it represents an Active only peer
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,mdm9607-rpmpd", .data = &mdm9607_desc },
{ .compatible = "qcom,msm8226-rpmpd", .data = &msm8226_desc },
+ { .compatible = "qcom,msm8909-rpmpd", .data = &msm8916_desc },
{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
{ .compatible = "qcom,msm8939-rpmpd", .data = &msm8939_desc },
{ .compatible = "qcom,msm8953-rpmpd", .data = &msm8953_desc },
{ .compatible = "qcom,rpm-apq8084" },
{ .compatible = "qcom,rpm-ipq6018" },
{ .compatible = "qcom,rpm-msm8226" },
+ { .compatible = "qcom,rpm-msm8909" },
{ .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8936" },
{ .compatible = "qcom,rpm-msm8953" },
* @out: pointer to the outbound smem item
* @smem_items: ids of the two smem items
* @valid_entries: already scanned inbound entries
+ * @ssr_ack_enabled: SMP2P_FEATURE_SSR_ACK feature is supported and was enabled
+ * @ssr_ack: current cached state of the local ack bit
+ * @negotiation_done: whether negotiating finished
* @local_pid: processor id of the inbound edge
* @remote_pid: processor id of the outbound edge
* @ipc_regmap: regmap for the outbound ipc
{ 455, "QRB5165" },
{ 457, "SM8450" },
{ 459, "SM7225" },
- { 460, "SA8540P" },
+ { 460, "SA8295P" },
+ { 461, "SA8540P" },
{ 480, "SM8450" },
{ 482, "SM8450" },
{ 487, "SC7280" },
+ { 495, "SC7180P" },
};
static const char *socinfo_machine(struct device *dev, unsigned int id)
[SPM_REG_SEQ_ENTRY] = 0x400,
};
+/* SPM register data for 8909 */
+static const struct spm_reg_data spm_reg_8909_cpu = {
+ .reg_offset = spm_reg_offset_v3_0,
+ .spm_cfg = 0x1,
+ .spm_dly = 0x3C102800,
+ .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
+ 0x5B, 0x60, 0x03, 0x60, 0x76, 0x76, 0x0B, 0x94, 0x5B, 0x80,
+ 0x10, 0x26, 0x30, 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 5,
+};
+
/* SPM register data for 8916 */
static const struct spm_reg_data spm_reg_8916_cpu = {
.reg_offset = spm_reg_offset_v3_0,
.data = &spm_reg_660_silver_l2 },
{ .compatible = "qcom,msm8226-saw2-v2.1-cpu",
.data = &spm_reg_8226_cpu },
+ { .compatible = "qcom,msm8909-saw2-v3.0-cpu",
+ .data = &spm_reg_8909_cpu },
{ .compatible = "qcom,msm8916-saw2-v3.0-cpu",
.data = &spm_reg_8916_cpu },
{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
{ "a2cv6", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
{ "a2cn2", R8A779A0_PD_A2CN2, R8A779A0_PD_A3IR },
{ "a2imp23", R8A779A0_PD_A2IMP23, R8A779A0_PD_A3IR },
- { "a2dp1", R8A779A0_PD_A2DP0, R8A779A0_PD_A3IR },
- { "a2cv2", R8A779A0_PD_A2CV0, R8A779A0_PD_A3IR },
- { "a2cv3", R8A779A0_PD_A2CV1, R8A779A0_PD_A3IR },
- { "a2cv5", R8A779A0_PD_A2CV4, R8A779A0_PD_A3IR },
- { "a2cv7", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
+ { "a2dp1", R8A779A0_PD_A2DP1, R8A779A0_PD_A3IR },
+ { "a2cv2", R8A779A0_PD_A2CV2, R8A779A0_PD_A3IR },
+ { "a2cv3", R8A779A0_PD_A2CV3, R8A779A0_PD_A3IR },
+ { "a2cv5", R8A779A0_PD_A2CV5, R8A779A0_PD_A3IR },
+ { "a2cv7", R8A779A0_PD_A2CV7, R8A779A0_PD_A3IR },
{ "a2cn1", R8A779A0_PD_A2CN1, R8A779A0_PD_A3IR },
{ "a1cnn0", R8A779A0_PD_A1CNN0, R8A779A0_PD_A2CN0 },
{ "a1cnn2", R8A779A0_PD_A1CNN2, R8A779A0_PD_A2CN2 },
struct rcar_gen4_sysc_area {
const char *name;
u8 pdr; /* PDRn */
- int parent; /* -1 if none */
- unsigned int flags; /* See PD_* */
+ s8 parent; /* -1 if none */
+ u8 flags; /* See PD_* */
};
/*
u16 chan_offs; /* Offset of PWRSR register for this area */
u8 chan_bit; /* Bit in PWR* (except for PWRUP in PWRSR) */
u8 isr_bit; /* Bit in SYSCI*R */
- int parent; /* -1 if none */
- unsigned int flags; /* See PD_* */
+ s8 parent; /* -1 if none */
+ u8 flags; /* See PD_* */
};
config SUNXI_MBUS
bool
default ARCH_SUNXI
+ depends on ARM || ARM64
help
Say y to enable the fixups needed to support the Allwinner
MBUS DMA quirks.
{ .compatible = "ti,am654-icssg", .data = &am65x_j721e_pruss_data, },
{ .compatible = "ti,j721e-icssg", .data = &am65x_j721e_pruss_data, },
{ .compatible = "ti,am642-icssg", .data = &am65x_j721e_pruss_data, },
+ { .compatible = "ti,am625-pruss", .data = &am65x_j721e_pruss_data, },
{},
};
MODULE_DEVICE_TABLE(of, pruss_of_match);
&m3_ipc->sd_fw_name);
if (ret) {
dev_dbg(dev, "Voltage scaling data blob not provided from DT.\n");
- };
+ }
/*
* Wait for firmware loading completion in a thread so we
cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "soc/event:starting",
xlnx_event_cpuhp_start, xlnx_event_cpuhp_down);
- ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
- 0, NULL);
+ ret = zynqmp_pm_register_sgi(sgi_num, 0);
if (ret) {
dev_err(&pdev->dev, "SGI %d Registration over TF-A failed with %d\n", sgi_num, ret);
xlnx_event_cleanup_sgi(pdev);
kfree(eve_data);
}
- ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, 0, 1, NULL);
+ ret = zynqmp_pm_register_sgi(0, 1);
if (ret)
dev_err(&pdev->dev, "SGI unregistration over TF-A failed with %d\n", ret);
return true;
}
+struct sdw_acpi_child_walk_data {
+ struct sdw_bus *bus;
+ struct acpi_device *adev;
+ struct sdw_slave_id id;
+ bool ignore_unique_id;
+};
+
+static int sdw_acpi_check_duplicate(struct acpi_device *adev, void *data)
+{
+ struct sdw_acpi_child_walk_data *cwd = data;
+ struct sdw_bus *bus = cwd->bus;
+ struct sdw_slave_id id;
+
+ if (adev == cwd->adev)
+ return 0;
+
+ if (!find_slave(bus, adev, &id))
+ return 0;
+
+ if (cwd->id.sdw_version != id.sdw_version || cwd->id.mfg_id != id.mfg_id ||
+ cwd->id.part_id != id.part_id || cwd->id.class_id != id.class_id)
+ return 0;
+
+ if (cwd->id.unique_id != id.unique_id) {
+ dev_dbg(bus->dev,
+ "Valid unique IDs 0x%x 0x%x for Slave mfg_id 0x%04x, part_id 0x%04x\n",
+ cwd->id.unique_id, id.unique_id, cwd->id.mfg_id,
+ cwd->id.part_id);
+ cwd->ignore_unique_id = false;
+ return 0;
+ }
+
+ dev_err(bus->dev,
+ "Invalid unique IDs 0x%x 0x%x for Slave mfg_id 0x%04x, part_id 0x%04x\n",
+ cwd->id.unique_id, id.unique_id, cwd->id.mfg_id, cwd->id.part_id);
+ return -ENODEV;
+}
+
+static int sdw_acpi_find_one(struct acpi_device *adev, void *data)
+{
+ struct sdw_bus *bus = data;
+ struct sdw_acpi_child_walk_data cwd = {
+ .bus = bus,
+ .adev = adev,
+ .ignore_unique_id = true,
+ };
+ int ret;
+
+ if (!find_slave(bus, adev, &cwd.id))
+ return 0;
+
+ /* Brute-force O(N^2) search for duplicates. */
+ ret = acpi_dev_for_each_child(ACPI_COMPANION(bus->dev),
+ sdw_acpi_check_duplicate, &cwd);
+ if (ret)
+ return ret;
+
+ if (cwd.ignore_unique_id)
+ cwd.id.unique_id = SDW_IGNORED_UNIQUE_ID;
+
+ /* Ignore errors and continue. */
+ sdw_slave_add(bus, &cwd.id, acpi_fwnode_handle(adev));
+ return 0;
+}
+
/*
* sdw_acpi_find_slaves() - Find Slave devices in Master ACPI node
* @bus: SDW bus instance
*/
int sdw_acpi_find_slaves(struct sdw_bus *bus)
{
- struct acpi_device *adev, *parent;
- struct acpi_device *adev2, *parent2;
+ struct acpi_device *parent;
parent = ACPI_COMPANION(bus->dev);
if (!parent) {
return -ENODEV;
}
- list_for_each_entry(adev, &parent->children, node) {
- struct sdw_slave_id id;
- struct sdw_slave_id id2;
- bool ignore_unique_id = true;
-
- if (!find_slave(bus, adev, &id))
- continue;
-
- /* brute-force O(N^2) search for duplicates */
- parent2 = parent;
- list_for_each_entry(adev2, &parent2->children, node) {
-
- if (adev == adev2)
- continue;
-
- if (!find_slave(bus, adev2, &id2))
- continue;
-
- if (id.sdw_version != id2.sdw_version ||
- id.mfg_id != id2.mfg_id ||
- id.part_id != id2.part_id ||
- id.class_id != id2.class_id)
- continue;
-
- if (id.unique_id != id2.unique_id) {
- dev_dbg(bus->dev,
- "Valid unique IDs 0x%x 0x%x for Slave mfg_id 0x%04x, part_id 0x%04x\n",
- id.unique_id, id2.unique_id, id.mfg_id, id.part_id);
- ignore_unique_id = false;
- } else {
- dev_err(bus->dev,
- "Invalid unique IDs 0x%x 0x%x for Slave mfg_id 0x%04x, part_id 0x%04x\n",
- id.unique_id, id2.unique_id, id.mfg_id, id.part_id);
- return -ENODEV;
- }
- }
-
- if (ignore_unique_id)
- id.unique_id = SDW_IGNORED_UNIQUE_ID;
-
- /*
- * don't error check for sdw_slave_add as we want to continue
- * adding Slaves
- */
- sdw_slave_add(bus, &id, acpi_fwnode_handle(adev));
- }
-
- return 0;
+ return acpi_dev_for_each_child(parent, sdw_acpi_find_one, bus);
}
#endif
config SPI_BCM63XX_HSSPI
tristate "Broadcom BCM63XX HS SPI controller driver"
- depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
+ depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST
help
This enables support for the High Speed SPI controller present on
newer Broadcom BCM63XX SoCs.
This controller does not support generic SPI messages. It only
supports the high-level SPI memory interface.
+config SPI_GXP
+ tristate "GXP SPI driver"
+ depends on ARCH_HPE || COMPILE_TEST
+ help
+ This enables support for the driver for GXP bus attached SPI
+ controllers.
+
config SPI_HISI_KUNPENG
tristate "HiSilicon SPI Controller for Kunpeng SoCs"
depends on (ARM64 && ACPI) || COMPILE_TEST
This enables master mode support for the SPIFC (SPI flash
controller) available in Amlogic Meson SoCs.
+config SPI_MICROCHIP_CORE
+ tristate "Microchip FPGA SPI controllers"
+ depends on SPI_MASTER
+ help
+ This enables the SPI driver for Microchip FPGA SPI controllers.
+ Say Y or M here if you want to use the "hard" controllers on
+ PolarFire SoC.
+ If built as a module, it will be called spi-microchip-core.
+
config SPI_MT65XX
tristate "MediaTek SPI controller"
depends on ARCH_MEDIATEK || COMPILE_TEST
obj-$(CONFIG_SPI_FSL_QUADSPI) += spi-fsl-qspi.o
obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
+obj-$(CONFIG_SPI_GXP) += spi-gxp.o
obj-$(CONFIG_SPI_HISI_KUNPENG) += spi-hisi-kunpeng.o
obj-$(CONFIG_SPI_HISI_SFC_V3XX) += spi-hisi-sfc-v3xx.o
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o
obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
+obj-$(CONFIG_SPI_MICROCHIP_CORE) += spi-microchip-core.o
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/spi/spi-mem.h>
/* QSPI register offsets */
/* special case not supported by hardware */
if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth &&
- op->dummy.nbytes == 0)
+ op->dummy.nbytes == 0)
return false;
return true;
if (op->addr.val + op->data.nbytes > aq->mmap_size)
return -ENOTSUPP;
+ err = pm_runtime_resume_and_get(&aq->pdev->dev);
+ if (err < 0)
+ return err;
+
err = atmel_qspi_set_cfg(aq, op, &offset);
if (err)
- return err;
+ goto pm_runtime_put;
/* Skip to the final steps if there is no data */
if (op->data.nbytes) {
/* Poll INSTRuction End status */
sr = atmel_qspi_read(aq, QSPI_SR);
if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
- return err;
+ goto pm_runtime_put;
/* Wait for INSTRuction End interrupt */
reinit_completion(&aq->cmd_completion);
err = -ETIMEDOUT;
atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IDR);
+pm_runtime_put:
+ pm_runtime_mark_last_busy(&aq->pdev->dev);
+ pm_runtime_put_autosuspend(&aq->pdev->dev);
return err;
}
struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
unsigned long src_rate;
u32 scbr;
+ int ret;
if (ctrl->busy)
return -EBUSY;
if (scbr > 0)
scbr--;
+ ret = pm_runtime_resume_and_get(ctrl->dev.parent);
+ if (ret < 0)
+ return ret;
+
aq->scr = QSPI_SCR_SCBR(scbr);
atmel_qspi_write(aq->scr, aq, QSPI_SCR);
+ pm_runtime_mark_last_busy(ctrl->dev.parent);
+ pm_runtime_put_autosuspend(ctrl->dev.parent);
+
return 0;
}
if (err)
goto disable_qspick;
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
atmel_qspi_init(aq);
err = spi_register_controller(ctrl);
- if (err)
+ if (err) {
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
goto disable_qspick;
+ }
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
return 0;
{
struct spi_controller *ctrl = platform_get_drvdata(pdev);
struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret < 0)
+ return ret;
spi_unregister_controller(ctrl);
atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
clk_disable_unprepare(aq->qspick);
clk_disable_unprepare(aq->pclk);
return 0;
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return ret;
atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
- clk_disable_unprepare(aq->qspick);
- clk_disable_unprepare(aq->pclk);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_force_suspend(dev);
+
+ clk_unprepare(aq->qspick);
+ clk_unprepare(aq->pclk);
return 0;
}
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+ int ret;
- clk_prepare_enable(aq->pclk);
- clk_prepare_enable(aq->qspick);
+ clk_prepare(aq->pclk);
+ clk_prepare(aq->qspick);
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret < 0)
+ return ret;
atmel_qspi_init(aq);
atmel_qspi_write(aq->scr, aq, QSPI_SCR);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+static int __maybe_unused atmel_qspi_runtime_suspend(struct device *dev)
+{
+ struct spi_controller *ctrl = dev_get_drvdata(dev);
+ struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+
+ clk_disable(aq->qspick);
+ clk_disable(aq->pclk);
+
return 0;
}
-static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
- atmel_qspi_resume);
+static int __maybe_unused atmel_qspi_runtime_resume(struct device *dev)
+{
+ struct spi_controller *ctrl = dev_get_drvdata(dev);
+ struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+ int ret;
+
+ ret = clk_enable(aq->pclk);
+ if (ret)
+ return ret;
+
+ return clk_enable(aq->qspick);
+}
+
+static const struct dev_pm_ops __maybe_unused atmel_qspi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(atmel_qspi_suspend, atmel_qspi_resume)
+ SET_RUNTIME_PM_OPS(atmel_qspi_runtime_suspend,
+ atmel_qspi_runtime_resume, NULL)
+};
static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
.driver = {
.name = "atmel_qspi",
.of_match_table = atmel_qspi_dt_ids,
- .pm = &atmel_qspi_pm_ops,
+ .pm = pm_ptr(&atmel_qspi_pm_ops),
},
.probe = atmel_qspi_probe,
.remove = atmel_qspi_remove,
struct spi_master *master;
struct altera_spi *hw;
void __iomem *base;
- int err = -ENODEV;
+ int err;
- master = spi_alloc_master(dev, sizeof(struct altera_spi));
+ master = devm_spi_alloc_master(dev, sizeof(struct altera_spi));
if (!master)
return -ENOMEM;
altera_spi_init_master(master);
err = devm_spi_register_master(dev, master);
- if (err) {
- dev_err(dev, "%s failed to register spi master %d\n", __func__, err);
- goto exit;
- }
+ if (err)
+ return dev_err_probe(dev, err, "%s failed to register spi master\n",
+ __func__);
if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
strscpy(board_info.modalias, "m10-n5010", SPI_NAME_SIZE);
}
return 0;
-exit:
- spi_master_put(master);
- return err;
}
static const struct dfl_device_id dfl_spi_altera_ids[] = {
#define AMD_SPI_XFER_TX 1
#define AMD_SPI_XFER_RX 2
+/**
+ * enum amd_spi_versions - SPI controller versions
+ * @AMD_SPI_V1: AMDI0061 hardware version
+ * @AMD_SPI_V2: AMDI0062 hardware version
+ */
enum amd_spi_versions {
- AMD_SPI_V1 = 1, /* AMDI0061 */
- AMD_SPI_V2, /* AMDI0062 */
+ AMD_SPI_V1 = 1,
+ AMD_SPI_V2,
};
+/**
+ * struct amd_spi - SPI driver instance
+ * @io_remap_addr: Start address of the SPI controller registers
+ * @version: SPI controller hardware version
+ */
struct amd_spi {
void __iomem *io_remap_addr;
- unsigned long io_base_addr;
enum amd_spi_versions version;
};
struct device *dev = &pdev->dev;
struct spi_master *master;
struct amd_spi *amd_spi;
- int err = 0;
+ int err;
/* Allocate storage for spi_master and driver private data */
- master = spi_alloc_master(dev, sizeof(struct amd_spi));
- if (!master) {
- dev_err(dev, "Error allocating SPI master\n");
- return -ENOMEM;
- }
+ master = devm_spi_alloc_master(dev, sizeof(struct amd_spi));
+ if (!master)
+ return dev_err_probe(dev, -ENOMEM, "Error allocating SPI master\n");
amd_spi = spi_master_get_devdata(master);
amd_spi->io_remap_addr = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(amd_spi->io_remap_addr)) {
- err = PTR_ERR(amd_spi->io_remap_addr);
- dev_err(dev, "error %d ioremap of SPI registers failed\n", err);
- goto err_free_master;
- }
+ if (IS_ERR(amd_spi->io_remap_addr))
+ return dev_err_probe(dev, PTR_ERR(amd_spi->io_remap_addr),
+ "ioremap of SPI registers failed\n");
+
dev_dbg(dev, "io_remap_address: %p\n", amd_spi->io_remap_addr);
amd_spi->version = (enum amd_spi_versions) device_get_match_data(dev);
/* Register the controller with SPI framework */
err = devm_spi_register_master(dev, master);
- if (err) {
- dev_err(dev, "error %d registering SPI controller\n", err);
- goto err_free_master;
- }
+ if (err)
+ return dev_err_probe(dev, err, "error registering SPI controller\n");
return 0;
-
-err_free_master:
- spi_master_put(master);
-
- return err;
}
#ifdef CONFIG_ACPI
while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) {
val = *(u32 *)a3700_spi->tx_buf;
- spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
+ spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, cpu_to_le32(val));
a3700_spi->buf_len -= 4;
a3700_spi->tx_buf += 4;
}
while (!a3700_is_rfifo_empty(a3700_spi) && a3700_spi->buf_len) {
val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
if (a3700_spi->buf_len >= 4) {
-
+ val = le32_to_cpu(val);
memcpy(a3700_spi->rx_buf, &val, 4);
a3700_spi->buf_len -= 4;
return 0;
}
-#ifdef CONFIG_PM
static int atmel_spi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
return clk_prepare_enable(as->clk);
}
-#ifdef CONFIG_PM_SLEEP
static int atmel_spi_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
/* Start the queue running */
return spi_master_resume(master);
}
-#endif
static const struct dev_pm_ops atmel_spi_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
- SET_RUNTIME_PM_OPS(atmel_spi_runtime_suspend,
- atmel_spi_runtime_resume, NULL)
+ SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
+ RUNTIME_PM_OPS(atmel_spi_runtime_suspend,
+ atmel_spi_runtime_resume, NULL)
};
-#define ATMEL_SPI_PM_OPS (&atmel_spi_pm_ops)
-#else
-#define ATMEL_SPI_PM_OPS NULL
-#endif
static const struct of_device_id atmel_spi_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-spi" },
static struct platform_driver atmel_spi_driver = {
.driver = {
.name = "atmel_spi",
- .pm = ATMEL_SPI_PM_OPS,
+ .pm = pm_ptr(&atmel_spi_pm_ops),
.of_match_table = atmel_spi_dt_ids,
},
.probe = atmel_spi_probe,
struct bcm2835_spi *bs = dev_id;
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ /* Bail out early if interrupts are not enabled */
+ if (!(cs & BCM2835_SPI_CS_INTR))
+ return IRQ_NONE;
+
/*
* An interrupt is signaled either if DONE is set (TX FIFO empty)
* or if RXR is set (RX FIFO >= ¾ full).
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
- err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
- dev_name(&pdev->dev), bs);
+ err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt,
+ IRQF_SHARED, dev_name(&pdev->dev), bs);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_dma_release;
if (spi->mode & SPI_LOOP)
cr0 |= DW_HSSI_CTRLR0_SRL;
- if (dws->caps & DW_SPI_CAP_KEEMBAY_MST)
- cr0 |= DW_HSSI_CTRLR0_KEEMBAY_MST;
+ /* CTRLR0[31] MST */
+ if (dw_spi_ver_is_ge(dws, HSSI, 102A))
+ cr0 |= DW_HSSI_CTRLR0_MST;
}
return cr0;
if (dws->dma_ops && dws->dma_ops->dma_init) {
ret = dws->dma_ops->dma_init(dev, dws);
- if (ret) {
+ if (ret == -EPROBE_DEFER) {
+ goto err_free_irq;
+ } else if (ret) {
dev_warn(dev, "DMA init failed\n");
} else {
master->can_dma = dws->dma_ops->can_dma;
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
dw_spi_enable_chip(dws, 0);
+err_free_irq:
free_irq(dws->irq, master);
err_free_master:
spi_controller_put(master);
static int dw_spi_dma_init_generic(struct device *dev, struct dw_spi *dws)
{
- dws->rxchan = dma_request_slave_channel(dev, "rx");
- if (!dws->rxchan)
- return -ENODEV;
+ int ret;
- dws->txchan = dma_request_slave_channel(dev, "tx");
- if (!dws->txchan) {
- dma_release_channel(dws->rxchan);
+ dws->rxchan = dma_request_chan(dev, "rx");
+ if (IS_ERR(dws->rxchan)) {
+ ret = PTR_ERR(dws->rxchan);
dws->rxchan = NULL;
- return -ENODEV;
+ goto err_exit;
+ }
+
+ dws->txchan = dma_request_chan(dev, "tx");
+ if (IS_ERR(dws->txchan)) {
+ ret = PTR_ERR(dws->txchan);
+ dws->txchan = NULL;
+ goto free_rxchan;
}
dws->master->dma_rx = dws->rxchan;
dw_spi_dma_sg_burst_init(dws);
return 0;
+
+free_rxchan:
+ dma_release_channel(dws->rxchan);
+ dws->rxchan = NULL;
+err_exit:
+ return ret;
}
static void dw_spi_dma_exit(struct dw_spi *dws)
return 0;
}
-static int dw_spi_keembay_init(struct platform_device *pdev,
- struct dw_spi_mmio *dwsmmio)
+static int dw_spi_intel_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
{
dwsmmio->dws.ip = DW_HSSI_ID;
- dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST;
return 0;
}
{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ .compatible = "renesas,rzn1-spi", .data = dw_spi_pssi_init},
{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
- { .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init},
+ { .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
+ { .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
{ /* end of table */}
((_dws)->ip == DW_ ## _ip ## _ID)
#define __dw_spi_ver_cmp(_dws, _ip, _ver, _op) \
- (dw_spi_ip_is(_dws, _ip) && (_dws)->ver _op DW_ ## _ip ## _ver)
+ (dw_spi_ip_is(_dws, _ip) && (_dws)->ver _op DW_ ## _ip ## _ ## _ver)
#define dw_spi_ver_is(_dws, _ip, _ver) __dw_spi_ver_cmp(_dws, _ip, _ver, ==)
/* DW SPI controller capabilities */
#define DW_SPI_CAP_CS_OVERRIDE BIT(0)
-#define DW_SPI_CAP_KEEMBAY_MST BIT(1)
-#define DW_SPI_CAP_DFS32 BIT(2)
+#define DW_SPI_CAP_DFS32 BIT(1)
/* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */
#define DW_SPI_CTRLR0 0x00
#define DW_HSSI_CTRLR0_SCPOL BIT(9)
#define DW_HSSI_CTRLR0_TMOD_MASK GENMASK(11, 10)
#define DW_HSSI_CTRLR0_SRL BIT(13)
-
-/*
- * For Keem Bay, CTRLR0[31] is used to select controller mode.
- * 0: SSI is slave
- * 1: SSI is master
- */
-#define DW_HSSI_CTRLR0_KEEMBAY_MST BIT(31)
+#define DW_HSSI_CTRLR0_MST BIT(31)
/* Bit fields in CTRLR1 */
#define DW_SPI_NDF_MASK GENMASK(15, 0)
#define FSI2SPI_IRQ 0x20
#define SPI_FSI_BASE 0x70000
-#define SPI_FSI_INIT_TIMEOUT_MS 1000
-#define SPI_FSI_STATUS_TIMEOUT_MS 100
+#define SPI_FSI_TIMEOUT_MS 1000
#define SPI_FSI_MAX_RX_SIZE 8
#define SPI_FSI_MAX_TX_SIZE 40
static int fsi_spi_transfer_data(struct fsi_spi *ctx,
struct spi_transfer *transfer)
{
+ int loops;
int rc = 0;
unsigned long end;
u64 status = 0ULL;
if (rc)
return rc;
- end = jiffies + msecs_to_jiffies(SPI_FSI_STATUS_TIMEOUT_MS);
+ loops = 0;
+ end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS);
do {
- if (time_after(jiffies, end))
+ if (loops++ && time_after(jiffies, end))
return -ETIMEDOUT;
rc = fsi_spi_status(ctx, &status, "TX");
u8 *rx = transfer->rx_buf;
while (transfer->len > recv) {
- end = jiffies + msecs_to_jiffies(SPI_FSI_STATUS_TIMEOUT_MS);
+ loops = 0;
+ end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS);
do {
- if (time_after(jiffies, end))
+ if (loops++ && time_after(jiffies, end))
return -ETIMEDOUT;
rc = fsi_spi_status(ctx, &status, "RX");
static int fsi_spi_transfer_init(struct fsi_spi *ctx)
{
+ int loops = 0;
int rc;
bool reset = false;
unsigned long end;
SPI_FSI_CLOCK_CFG_SCK_NO_DEL |
FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 19);
- end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS);
+ end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS);
do {
- if (time_after(jiffies, end))
+ if (loops++ && time_after(jiffies, end))
return -ETIMEDOUT;
rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, &status);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0=or-later
+/* Copyright (C) 2022 Hewlett-Packard Development Company, L.P. */
+
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#define GXP_SPI0_MAX_CHIPSELECT 2
+#define GXP_SPI_SLEEP_TIME 1
+#define GXP_SPI_TIMEOUT (130 * 1000000 / GXP_SPI_SLEEP_TIME)
+
+#define MANUAL_MODE 0
+#define DIRECT_MODE 1
+#define SPILDAT_LEN 256
+
+#define OFFSET_SPIMCFG 0x0
+#define OFFSET_SPIMCTRL 0x4
+#define OFFSET_SPICMD 0x5
+#define OFFSET_SPIDCNT 0x6
+#define OFFSET_SPIADDR 0x8
+#define OFFSET_SPIINTSTS 0xc
+
+#define SPIMCTRL_START 0x01
+#define SPIMCTRL_BUSY 0x02
+#define SPIMCTRL_DIR 0x08
+
+struct gxp_spi;
+
+struct gxp_spi_chip {
+ struct gxp_spi *spifi;
+ u32 cs;
+};
+
+struct gxp_spi_data {
+ u32 max_cs;
+ u32 mode_bits;
+};
+
+struct gxp_spi {
+ const struct gxp_spi_data *data;
+ void __iomem *reg_base;
+ void __iomem *dat_base;
+ void __iomem *dir_base;
+ struct device *dev;
+ struct gxp_spi_chip chips[GXP_SPI0_MAX_CHIPSELECT];
+};
+
+static void gxp_spi_set_mode(struct gxp_spi *spifi, int mode)
+{
+ u8 value;
+ void __iomem *reg_base = spifi->reg_base;
+
+ value = readb(reg_base + OFFSET_SPIMCTRL);
+
+ if (mode == MANUAL_MODE) {
+ writeb(0x55, reg_base + OFFSET_SPICMD);
+ writeb(0xaa, reg_base + OFFSET_SPICMD);
+ value &= ~0x30;
+ } else {
+ value |= 0x30;
+ }
+ writeb(value, reg_base + OFFSET_SPIMCTRL);
+}
+
+static int gxp_spi_read_reg(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
+{
+ int ret;
+ struct gxp_spi *spifi = chip->spifi;
+ void __iomem *reg_base = spifi->reg_base;
+ u32 value;
+
+ value = readl(reg_base + OFFSET_SPIMCFG);
+ value &= ~(1 << 24);
+ value |= (chip->cs << 24);
+ value &= ~(0x07 << 16);
+ value &= ~(0x1f << 19);
+ writel(value, reg_base + OFFSET_SPIMCFG);
+
+ writel(0, reg_base + OFFSET_SPIADDR);
+
+ writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
+
+ writew(op->data.nbytes, reg_base + OFFSET_SPIDCNT);
+
+ value = readb(reg_base + OFFSET_SPIMCTRL);
+ value &= ~SPIMCTRL_DIR;
+ value |= SPIMCTRL_START;
+
+ writeb(value, reg_base + OFFSET_SPIMCTRL);
+
+ ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
+ !(value & SPIMCTRL_BUSY),
+ GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
+ if (ret) {
+ dev_warn(spifi->dev, "read reg busy time out\n");
+ return ret;
+ }
+
+ memcpy_fromio(op->data.buf.in, spifi->dat_base, op->data.nbytes);
+ return ret;
+}
+
+static int gxp_spi_write_reg(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
+{
+ int ret;
+ struct gxp_spi *spifi = chip->spifi;
+ void __iomem *reg_base = spifi->reg_base;
+ u32 value;
+
+ value = readl(reg_base + OFFSET_SPIMCFG);
+ value &= ~(1 << 24);
+ value |= (chip->cs << 24);
+ value &= ~(0x07 << 16);
+ value &= ~(0x1f << 19);
+ writel(value, reg_base + OFFSET_SPIMCFG);
+
+ writel(0, reg_base + OFFSET_SPIADDR);
+
+ writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
+
+ memcpy_toio(spifi->dat_base, op->data.buf.in, op->data.nbytes);
+
+ writew(op->data.nbytes, reg_base + OFFSET_SPIDCNT);
+
+ value = readb(reg_base + OFFSET_SPIMCTRL);
+ value |= SPIMCTRL_DIR;
+ value |= SPIMCTRL_START;
+
+ writeb(value, reg_base + OFFSET_SPIMCTRL);
+
+ ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
+ !(value & SPIMCTRL_BUSY),
+ GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
+ if (ret)
+ dev_warn(spifi->dev, "write reg busy time out\n");
+
+ return ret;
+}
+
+static ssize_t gxp_spi_read(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
+{
+ struct gxp_spi *spifi = chip->spifi;
+ u32 offset = op->addr.val;
+
+ if (chip->cs == 0)
+ offset += 0x4000000;
+
+ memcpy_fromio(op->data.buf.in, spifi->dir_base + offset, op->data.nbytes);
+
+ return 0;
+}
+
+static ssize_t gxp_spi_write(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
+{
+ struct gxp_spi *spifi = chip->spifi;
+ void __iomem *reg_base = spifi->reg_base;
+ u32 write_len;
+ u32 value;
+ int ret;
+
+ write_len = op->data.nbytes;
+ if (write_len > SPILDAT_LEN)
+ write_len = SPILDAT_LEN;
+
+ value = readl(reg_base + OFFSET_SPIMCFG);
+ value &= ~(1 << 24);
+ value |= (chip->cs << 24);
+ value &= ~(0x07 << 16);
+ value |= (op->addr.nbytes << 16);
+ value &= ~(0x1f << 19);
+ writel(value, reg_base + OFFSET_SPIMCFG);
+
+ writel(op->addr.val, reg_base + OFFSET_SPIADDR);
+
+ writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
+
+ writew(write_len, reg_base + OFFSET_SPIDCNT);
+
+ memcpy_toio(spifi->dat_base, op->data.buf.in, write_len);
+
+ value = readb(reg_base + OFFSET_SPIMCTRL);
+ value |= SPIMCTRL_DIR;
+ value |= SPIMCTRL_START;
+
+ writeb(value, reg_base + OFFSET_SPIMCTRL);
+
+ ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
+ !(value & SPIMCTRL_BUSY),
+ GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
+ if (ret) {
+ dev_warn(spifi->dev, "write busy time out\n");
+ return ret;
+ }
+
+ return write_len;
+}
+
+static int do_gxp_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct gxp_spi *spifi = spi_controller_get_devdata(mem->spi->master);
+ struct gxp_spi_chip *chip = &spifi->chips[mem->spi->chip_select];
+ int ret;
+
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ if (!op->addr.nbytes)
+ ret = gxp_spi_read_reg(chip, op);
+ else
+ ret = gxp_spi_read(chip, op);
+ } else {
+ if (!op->addr.nbytes)
+ ret = gxp_spi_write_reg(chip, op);
+ else
+ ret = gxp_spi_write(chip, op);
+ }
+
+ return ret;
+}
+
+static int gxp_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ int ret;
+
+ ret = do_gxp_exec_mem_op(mem, op);
+ if (ret)
+ dev_err(&mem->spi->dev, "operation failed: %d", ret);
+
+ return ret;
+}
+
+static const struct spi_controller_mem_ops gxp_spi_mem_ops = {
+ .exec_op = gxp_exec_mem_op,
+};
+
+static int gxp_spi_setup(struct spi_device *spi)
+{
+ struct gxp_spi *spifi = spi_controller_get_devdata(spi->master);
+ unsigned int cs = spi->chip_select;
+ struct gxp_spi_chip *chip = &spifi->chips[cs];
+
+ chip->spifi = spifi;
+ chip->cs = cs;
+
+ gxp_spi_set_mode(spifi, MANUAL_MODE);
+
+ return 0;
+}
+
+static int gxp_spifi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct gxp_spi_data *data;
+ struct spi_controller *ctlr;
+ struct gxp_spi *spifi;
+ struct resource *res;
+ int ret;
+
+ data = of_device_get_match_data(&pdev->dev);
+
+ ctlr = devm_spi_alloc_master(dev, sizeof(*spifi));
+ if (!ctlr)
+ return -ENOMEM;
+
+ spifi = spi_controller_get_devdata(ctlr);
+
+ platform_set_drvdata(pdev, spifi);
+ spifi->data = data;
+ spifi->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ spifi->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spifi->reg_base))
+ return PTR_ERR(spifi->reg_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ spifi->dat_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spifi->dat_base))
+ return PTR_ERR(spifi->dat_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ spifi->dir_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spifi->dir_base))
+ return PTR_ERR(spifi->dir_base);
+
+ ctlr->mode_bits = data->mode_bits;
+ ctlr->bus_num = pdev->id;
+ ctlr->mem_ops = &gxp_spi_mem_ops;
+ ctlr->setup = gxp_spi_setup;
+ ctlr->num_chipselect = data->max_cs;
+ ctlr->dev.of_node = dev->of_node;
+
+ ret = devm_spi_register_controller(dev, ctlr);
+ if (ret) {
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to register spi controller\n");
+ }
+
+ return 0;
+}
+
+static const struct gxp_spi_data gxp_spifi_data = {
+ .max_cs = 2,
+ .mode_bits = 0,
+};
+
+static const struct of_device_id gxp_spifi_match[] = {
+ {.compatible = "hpe,gxp-spifi", .data = &gxp_spifi_data },
+ { /* null */ }
+};
+MODULE_DEVICE_TABLE(of, gxp_spifi_match);
+
+static struct platform_driver gxp_spifi_driver = {
+ .probe = gxp_spifi_probe,
+ .driver = {
+ .name = "gxp-spifi",
+ .of_match_table = gxp_spifi_match,
+ },
+};
+module_platform_driver(gxp_spifi_driver);
+
+MODULE_DESCRIPTION("HPE GXP SPI Flash Interface driver");
+MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
+MODULE_LICENSE("GPL");
{ PCI_VDEVICE(INTEL, 0x54a4), (unsigned long)&cnl_info },
{ PCI_VDEVICE(INTEL, 0x7a24), (unsigned long)&cnl_info },
{ PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info },
+ { PCI_VDEVICE(INTEL, 0x7e23), (unsigned long)&cnl_info },
{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
return -ENOMEM;
pdata->nr_parts = 1;
- pdata->parts = devm_kcalloc(ispi->dev, sizeof(*pdata->parts),
- pdata->nr_parts, GFP_KERNEL);
+ pdata->parts = devm_kcalloc(ispi->dev, pdata->nr_parts,
+ sizeof(*pdata->parts), GFP_KERNEL);
if (!pdata->parts)
return -ENOMEM;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Microchip CoreSPI SPI controller driver
+ *
+ * Copyright (c) 2018-2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ * Author: Conor Dooley <conor.dooley@microchip.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#define MAX_LEN (0xffff)
+#define MAX_CS (8)
+#define DEFAULT_FRAMESIZE (8)
+#define FIFO_DEPTH (32)
+#define CLK_GEN_MODE1_MAX (255)
+#define CLK_GEN_MODE0_MAX (15)
+#define CLK_GEN_MIN (0)
+#define MODE_X_MASK_SHIFT (24)
+
+#define CONTROL_ENABLE BIT(0)
+#define CONTROL_MASTER BIT(1)
+#define CONTROL_RX_DATA_INT BIT(4)
+#define CONTROL_TX_DATA_INT BIT(5)
+#define CONTROL_RX_OVER_INT BIT(6)
+#define CONTROL_TX_UNDER_INT BIT(7)
+#define CONTROL_SPO BIT(24)
+#define CONTROL_SPH BIT(25)
+#define CONTROL_SPS BIT(26)
+#define CONTROL_FRAMEURUN BIT(27)
+#define CONTROL_CLKMODE BIT(28)
+#define CONTROL_BIGFIFO BIT(29)
+#define CONTROL_OENOFF BIT(30)
+#define CONTROL_RESET BIT(31)
+
+#define CONTROL_MODE_MASK GENMASK(3, 2)
+#define MOTOROLA_MODE (0)
+#define CONTROL_FRAMECNT_MASK GENMASK(23, 8)
+#define CONTROL_FRAMECNT_SHIFT (8)
+
+#define STATUS_ACTIVE BIT(14)
+#define STATUS_SSEL BIT(13)
+#define STATUS_FRAMESTART BIT(12)
+#define STATUS_TXFIFO_EMPTY_NEXT_READ BIT(11)
+#define STATUS_TXFIFO_EMPTY BIT(10)
+#define STATUS_TXFIFO_FULL_NEXT_WRITE BIT(9)
+#define STATUS_TXFIFO_FULL BIT(8)
+#define STATUS_RXFIFO_EMPTY_NEXT_READ BIT(7)
+#define STATUS_RXFIFO_EMPTY BIT(6)
+#define STATUS_RXFIFO_FULL_NEXT_WRITE BIT(5)
+#define STATUS_RXFIFO_FULL BIT(4)
+#define STATUS_TX_UNDERRUN BIT(3)
+#define STATUS_RX_OVERFLOW BIT(2)
+#define STATUS_RXDAT_RXED BIT(1)
+#define STATUS_TXDAT_SENT BIT(0)
+
+#define INT_TXDONE BIT(0)
+#define INT_RXRDY BIT(1)
+#define INT_RX_CHANNEL_OVERFLOW BIT(2)
+#define INT_TX_CHANNEL_UNDERRUN BIT(3)
+
+#define INT_ENABLE_MASK (CONTROL_RX_DATA_INT | CONTROL_TX_DATA_INT | \
+ CONTROL_RX_OVER_INT | CONTROL_TX_UNDER_INT)
+
+#define REG_CONTROL (0x00)
+#define REG_FRAME_SIZE (0x04)
+#define REG_STATUS (0x08)
+#define REG_INT_CLEAR (0x0c)
+#define REG_RX_DATA (0x10)
+#define REG_TX_DATA (0x14)
+#define REG_CLK_GEN (0x18)
+#define REG_SLAVE_SELECT (0x1c)
+#define SSEL_MASK GENMASK(7, 0)
+#define SSEL_DIRECT BIT(8)
+#define SSELOUT_SHIFT 9
+#define SSELOUT BIT(SSELOUT_SHIFT)
+#define REG_MIS (0x20)
+#define REG_RIS (0x24)
+#define REG_CONTROL2 (0x28)
+#define REG_COMMAND (0x2c)
+#define REG_PKTSIZE (0x30)
+#define REG_CMD_SIZE (0x34)
+#define REG_HWSTATUS (0x38)
+#define REG_STAT8 (0x3c)
+#define REG_CTRL2 (0x48)
+#define REG_FRAMESUP (0x50)
+
+struct mchp_corespi {
+ void __iomem *regs;
+ struct clk *clk;
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ u32 clk_gen; /* divider for spi output clock generated by the controller */
+ u32 clk_mode;
+ int irq;
+ int tx_len;
+ int rx_len;
+ int pending;
+};
+
+static inline u32 mchp_corespi_read(struct mchp_corespi *spi, unsigned int reg)
+{
+ return readl(spi->regs + reg);
+}
+
+static inline void mchp_corespi_write(struct mchp_corespi *spi, unsigned int reg, u32 val)
+{
+ writel(val, spi->regs + reg);
+}
+
+static inline void mchp_corespi_enable(struct mchp_corespi *spi)
+{
+ u32 control = mchp_corespi_read(spi, REG_CONTROL);
+
+ control |= CONTROL_ENABLE;
+
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static inline void mchp_corespi_disable(struct mchp_corespi *spi)
+{
+ u32 control = mchp_corespi_read(spi, REG_CONTROL);
+
+ control &= ~CONTROL_ENABLE;
+
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi)
+{
+ u8 data;
+ int fifo_max, i = 0;
+
+ fifo_max = min(spi->rx_len, FIFO_DEPTH);
+
+ while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_EMPTY)) {
+ data = mchp_corespi_read(spi, REG_RX_DATA);
+
+ if (spi->rx_buf)
+ *spi->rx_buf++ = data;
+ i++;
+ }
+ spi->rx_len -= i;
+ spi->pending -= i;
+}
+
+static void mchp_corespi_enable_ints(struct mchp_corespi *spi)
+{
+ u32 control, mask = INT_ENABLE_MASK;
+
+ mchp_corespi_disable(spi);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+
+ control |= mask;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+
+ control |= CONTROL_ENABLE;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static void mchp_corespi_disable_ints(struct mchp_corespi *spi)
+{
+ u32 control, mask = INT_ENABLE_MASK;
+
+ mchp_corespi_disable(spi);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ control &= ~mask;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+
+ control |= CONTROL_ENABLE;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static inline void mchp_corespi_set_xfer_size(struct mchp_corespi *spi, int len)
+{
+ u32 control;
+ u16 lenpart;
+
+ /*
+ * Disable the SPI controller. Writes to transfer length have
+ * no effect when the controller is enabled.
+ */
+ mchp_corespi_disable(spi);
+
+ /*
+ * The lower 16 bits of the frame count are stored in the control reg
+ * for legacy reasons, but the upper 16 written to a different register:
+ * FRAMESUP. While both the upper and lower bits can be *READ* from the
+ * FRAMESUP register, writing to the lower 16 bits is a NOP
+ */
+ lenpart = len & 0xffff;
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ control &= ~CONTROL_FRAMECNT_MASK;
+ control |= lenpart << CONTROL_FRAMECNT_SHIFT;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+
+ lenpart = len & 0xffff0000;
+ mchp_corespi_write(spi, REG_FRAMESUP, lenpart);
+
+ control |= CONTROL_ENABLE;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi)
+{
+ u8 byte;
+ int fifo_max, i = 0;
+
+ fifo_max = min(spi->tx_len, FIFO_DEPTH);
+ mchp_corespi_set_xfer_size(spi, fifo_max);
+
+ while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_TXFIFO_FULL)) {
+ byte = spi->tx_buf ? *spi->tx_buf++ : 0xaa;
+ mchp_corespi_write(spi, REG_TX_DATA, byte);
+ i++;
+ }
+
+ spi->tx_len -= i;
+ spi->pending += i;
+}
+
+static inline void mchp_corespi_set_framesize(struct mchp_corespi *spi, int bt)
+{
+ u32 control;
+
+ /*
+ * Disable the SPI controller. Writes to the frame size have
+ * no effect when the controller is enabled.
+ */
+ mchp_corespi_disable(spi);
+
+ mchp_corespi_write(spi, REG_FRAME_SIZE, bt);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ control |= CONTROL_ENABLE;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static void mchp_corespi_set_cs(struct spi_device *spi, bool disable)
+{
+ u32 reg;
+ struct mchp_corespi *corespi = spi_master_get_devdata(spi->master);
+
+ reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT);
+ reg &= ~BIT(spi->chip_select);
+ reg |= !disable << spi->chip_select;
+
+ mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg);
+}
+
+static int mchp_corespi_setup(struct spi_device *spi)
+{
+ struct mchp_corespi *corespi = spi_master_get_devdata(spi->master);
+ u32 reg;
+
+ /*
+ * Active high slaves need to be specifically set to their inactive
+ * states during probe by adding them to the "control group" & thus
+ * driving their select line low.
+ */
+ if (spi->mode & SPI_CS_HIGH) {
+ reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT);
+ reg |= BIT(spi->chip_select);
+ mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg);
+ }
+ return 0;
+}
+
+static void mchp_corespi_init(struct spi_master *master, struct mchp_corespi *spi)
+{
+ unsigned long clk_hz;
+ u32 control = mchp_corespi_read(spi, REG_CONTROL);
+
+ control |= CONTROL_MASTER;
+
+ control &= ~CONTROL_MODE_MASK;
+ control |= MOTOROLA_MODE;
+
+ mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE);
+
+ /* max. possible spi clock rate is the apb clock rate */
+ clk_hz = clk_get_rate(spi->clk);
+ master->max_speed_hz = clk_hz;
+
+ /*
+ * The controller must be configured so that it doesn't remove Chip
+ * Select until the entire message has been transferred, even if at
+ * some points TX FIFO becomes empty.
+ *
+ * BIGFIFO mode is also enabled, which sets the fifo depth to 32 frames
+ * for the 8 bit transfers that this driver uses.
+ */
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ control |= CONTROL_SPS | CONTROL_BIGFIFO;
+
+ mchp_corespi_write(spi, REG_CONTROL, control);
+
+ mchp_corespi_enable_ints(spi);
+
+ /*
+ * It is required to enable direct mode, otherwise control over the chip
+ * select is relinquished to the hardware. SSELOUT is enabled too so we
+ * can deal with active high slaves.
+ */
+ mchp_corespi_write(spi, REG_SLAVE_SELECT, SSELOUT | SSEL_DIRECT);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+
+ control &= ~CONTROL_RESET;
+ control |= CONTROL_ENABLE;
+
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static inline void mchp_corespi_set_clk_gen(struct mchp_corespi *spi)
+{
+ u32 control;
+
+ mchp_corespi_disable(spi);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ if (spi->clk_mode)
+ control |= CONTROL_CLKMODE;
+ else
+ control &= ~CONTROL_CLKMODE;
+
+ mchp_corespi_write(spi, REG_CLK_GEN, spi->clk_gen);
+ mchp_corespi_write(spi, REG_CONTROL, control);
+ mchp_corespi_write(spi, REG_CONTROL, control | CONTROL_ENABLE);
+}
+
+static inline void mchp_corespi_set_mode(struct mchp_corespi *spi, unsigned int mode)
+{
+ u32 control, mode_val;
+
+ switch (mode & SPI_MODE_X_MASK) {
+ case SPI_MODE_0:
+ mode_val = 0;
+ break;
+ case SPI_MODE_1:
+ mode_val = CONTROL_SPH;
+ break;
+ case SPI_MODE_2:
+ mode_val = CONTROL_SPO;
+ break;
+ case SPI_MODE_3:
+ mode_val = CONTROL_SPH | CONTROL_SPO;
+ break;
+ }
+
+ /*
+ * Disable the SPI controller. Writes to the frame size have
+ * no effect when the controller is enabled.
+ */
+ mchp_corespi_disable(spi);
+
+ control = mchp_corespi_read(spi, REG_CONTROL);
+ control &= ~(SPI_MODE_X_MASK << MODE_X_MASK_SHIFT);
+ control |= mode_val;
+
+ mchp_corespi_write(spi, REG_CONTROL, control);
+
+ control |= CONTROL_ENABLE;
+ mchp_corespi_write(spi, REG_CONTROL, control);
+}
+
+static irqreturn_t mchp_corespi_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct mchp_corespi *spi = spi_master_get_devdata(master);
+ u32 intfield = mchp_corespi_read(spi, REG_MIS) & 0xf;
+ bool finalise = false;
+
+ /* Interrupt line may be shared and not for us at all */
+ if (intfield == 0)
+ return IRQ_NONE;
+
+ if (intfield & INT_TXDONE) {
+ mchp_corespi_write(spi, REG_INT_CLEAR, INT_TXDONE);
+
+ if (spi->rx_len)
+ mchp_corespi_read_fifo(spi);
+
+ if (spi->tx_len)
+ mchp_corespi_write_fifo(spi);
+
+ if (!spi->rx_len)
+ finalise = true;
+ }
+
+ if (intfield & INT_RXRDY)
+ mchp_corespi_write(spi, REG_INT_CLEAR, INT_RXRDY);
+
+ if (intfield & INT_RX_CHANNEL_OVERFLOW) {
+ mchp_corespi_write(spi, REG_INT_CLEAR, INT_RX_CHANNEL_OVERFLOW);
+ finalise = true;
+ dev_err(&master->dev,
+ "%s: RX OVERFLOW: rxlen: %d, txlen: %d\n", __func__,
+ spi->rx_len, spi->tx_len);
+ }
+
+ if (intfield & INT_TX_CHANNEL_UNDERRUN) {
+ mchp_corespi_write(spi, REG_INT_CLEAR, INT_TX_CHANNEL_UNDERRUN);
+ finalise = true;
+ dev_err(&master->dev,
+ "%s: TX UNDERFLOW: rxlen: %d, txlen: %d\n", __func__,
+ spi->rx_len, spi->tx_len);
+ }
+
+ if (finalise)
+ spi_finalize_current_transfer(master);
+
+ return IRQ_HANDLED;
+}
+
+static int mchp_corespi_calculate_clkgen(struct mchp_corespi *spi,
+ unsigned long target_hz)
+{
+ unsigned long clk_hz, spi_hz, clk_gen;
+
+ clk_hz = clk_get_rate(spi->clk);
+ if (!clk_hz)
+ return -EINVAL;
+ spi_hz = min(target_hz, clk_hz);
+
+ /*
+ * There are two possible clock modes for the controller generated
+ * clock's division ratio:
+ * CLK_MODE = 0: 1 / (2^(CLK_GEN + 1)) where CLK_GEN = 0 to 15.
+ * CLK_MODE = 1: 1 / (2 * CLK_GEN + 1) where CLK_GEN = 0 to 255.
+ * First try mode 1, fall back to 0 and if we have tried both modes and
+ * we /still/ can't get a good setting, we then throw the toys out of
+ * the pram and give up
+ * clk_gen is the register name for the clock divider on MPFS.
+ */
+ clk_gen = DIV_ROUND_UP(clk_hz, 2 * spi_hz) - 1;
+ if (clk_gen > CLK_GEN_MODE1_MAX || clk_gen <= CLK_GEN_MIN) {
+ clk_gen = DIV_ROUND_UP(clk_hz, spi_hz);
+ clk_gen = fls(clk_gen) - 1;
+
+ if (clk_gen > CLK_GEN_MODE0_MAX)
+ return -EINVAL;
+
+ spi->clk_mode = 0;
+ } else {
+ spi->clk_mode = 1;
+ }
+
+ spi->clk_gen = clk_gen;
+ return 0;
+}
+
+static int mchp_corespi_transfer_one(struct spi_master *master,
+ struct spi_device *spi_dev,
+ struct spi_transfer *xfer)
+{
+ struct mchp_corespi *spi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = mchp_corespi_calculate_clkgen(spi, (unsigned long)xfer->speed_hz);
+ if (ret) {
+ dev_err(&master->dev, "failed to set clk_gen for target %u Hz\n", xfer->speed_hz);
+ return ret;
+ }
+
+ mchp_corespi_set_clk_gen(spi);
+
+ spi->tx_buf = xfer->tx_buf;
+ spi->rx_buf = xfer->rx_buf;
+ spi->tx_len = xfer->len;
+ spi->rx_len = xfer->len;
+ spi->pending = 0;
+
+ mchp_corespi_set_xfer_size(spi, (spi->tx_len > FIFO_DEPTH)
+ ? FIFO_DEPTH : spi->tx_len);
+
+ if (spi->tx_len)
+ mchp_corespi_write_fifo(spi);
+ return 1;
+}
+
+static int mchp_corespi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_device *spi_dev = msg->spi;
+ struct mchp_corespi *spi = spi_master_get_devdata(master);
+
+ mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE);
+ mchp_corespi_set_mode(spi, spi_dev->mode);
+
+ return 0;
+}
+
+static int mchp_corespi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct mchp_corespi *spi;
+ struct resource *res;
+ u32 num_cs;
+ int ret = 0;
+
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*spi));
+ if (!master)
+ return dev_err_probe(&pdev->dev, -ENOMEM,
+ "unable to allocate master for SPI controller\n");
+
+ platform_set_drvdata(pdev, master);
+
+ if (of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs))
+ num_cs = MAX_CS;
+
+ master->num_chipselect = num_cs;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->setup = mchp_corespi_setup;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->transfer_one = mchp_corespi_transfer_one;
+ master->prepare_message = mchp_corespi_prepare_message;
+ master->set_cs = mchp_corespi_set_cs;
+ master->dev.of_node = pdev->dev.of_node;
+
+ spi = spi_master_get_devdata(master);
+
+ spi->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(spi->regs))
+ return PTR_ERR(spi->regs);
+
+ spi->irq = platform_get_irq(pdev, 0);
+ if (spi->irq <= 0)
+ return dev_err_probe(&pdev->dev, -ENXIO,
+ "invalid IRQ %d for SPI controller\n",
+ spi->irq);
+
+ ret = devm_request_irq(&pdev->dev, spi->irq, mchp_corespi_interrupt,
+ IRQF_SHARED, dev_name(&pdev->dev), master);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "could not request irq: %d\n", ret);
+
+ spi->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(spi->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk),
+ "could not get clk: %d\n", ret);
+
+ ret = clk_prepare_enable(spi->clk);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to enable clock\n");
+
+ mchp_corespi_init(master, spi);
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ mchp_corespi_disable(spi);
+ clk_disable_unprepare(spi->clk);
+ return dev_err_probe(&pdev->dev, ret,
+ "unable to register master for SPI controller\n");
+ }
+
+ dev_info(&pdev->dev, "Registered SPI controller %d\n", master->bus_num);
+
+ return 0;
+}
+
+static int mchp_corespi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct mchp_corespi *spi = spi_master_get_devdata(master);
+
+ mchp_corespi_disable_ints(spi);
+ clk_disable_unprepare(spi->clk);
+ mchp_corespi_disable(spi);
+
+ return 0;
+}
+
+#define MICROCHIP_SPI_PM_OPS (NULL)
+
+/*
+ * Platform driver data structure
+ */
+
+#if defined(CONFIG_OF)
+static const struct of_device_id mchp_corespi_dt_ids[] = {
+ { .compatible = "microchip,mpfs-spi" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mchp_corespi_dt_ids);
+#endif
+
+static struct platform_driver mchp_corespi_driver = {
+ .probe = mchp_corespi_probe,
+ .driver = {
+ .name = "microchip-corespi",
+ .pm = MICROCHIP_SPI_PM_OPS,
+ .of_match_table = of_match_ptr(mchp_corespi_dt_ids),
+ },
+ .remove = mchp_corespi_remove,
+};
+module_platform_driver(mchp_corespi_driver);
+MODULE_DESCRIPTION("Microchip coreSPI SPI controller driver");
+MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_LICENSE("GPL");
struct mpc52xx_psc_fifo __iomem *fifo;
unsigned int irq;
u8 bits_per_word;
- u8 busy;
-
- struct work_struct work;
-
- struct list_head queue;
- spinlock_t lock;
struct completion done;
};
return 0;
}
-static void mpc52xx_psc_spi_work(struct work_struct *work)
+int mpc52xx_psc_spi_transfer_one_message(struct spi_controller *ctlr,
+ struct spi_message *m)
{
- struct mpc52xx_psc_spi *mps =
- container_of(work, struct mpc52xx_psc_spi, work);
-
- spin_lock_irq(&mps->lock);
- mps->busy = 1;
- while (!list_empty(&mps->queue)) {
- struct spi_message *m;
- struct spi_device *spi;
- struct spi_transfer *t = NULL;
- unsigned cs_change;
- int status;
-
- m = container_of(mps->queue.next, struct spi_message, queue);
- list_del_init(&m->queue);
- spin_unlock_irq(&mps->lock);
-
- spi = m->spi;
- cs_change = 1;
- status = 0;
- list_for_each_entry (t, &m->transfers, transfer_list) {
- if (t->bits_per_word || t->speed_hz) {
- status = mpc52xx_psc_spi_transfer_setup(spi, t);
- if (status < 0)
- break;
- }
-
- if (cs_change)
- mpc52xx_psc_spi_activate_cs(spi);
- cs_change = t->cs_change;
-
- status = mpc52xx_psc_spi_transfer_rxtx(spi, t);
- if (status)
+ struct spi_device *spi;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status;
+
+ spi = m->spi;
+ cs_change = 1;
+ status = 0;
+ list_for_each_entry (t, &m->transfers, transfer_list) {
+ if (t->bits_per_word || t->speed_hz) {
+ status = mpc52xx_psc_spi_transfer_setup(spi, t);
+ if (status < 0)
break;
- m->actual_length += t->len;
+ }
- spi_transfer_delay_exec(t);
+ if (cs_change)
+ mpc52xx_psc_spi_activate_cs(spi);
+ cs_change = t->cs_change;
- if (cs_change)
- mpc52xx_psc_spi_deactivate_cs(spi);
- }
+ status = mpc52xx_psc_spi_transfer_rxtx(spi, t);
+ if (status)
+ break;
+ m->actual_length += t->len;
- m->status = status;
- if (m->complete)
- m->complete(m->context);
+ spi_transfer_delay_exec(t);
- if (status || !cs_change)
+ if (cs_change)
mpc52xx_psc_spi_deactivate_cs(spi);
+ }
- mpc52xx_psc_spi_transfer_setup(spi, NULL);
+ m->status = status;
+ if (status || !cs_change)
+ mpc52xx_psc_spi_deactivate_cs(spi);
- spin_lock_irq(&mps->lock);
- }
- mps->busy = 0;
- spin_unlock_irq(&mps->lock);
+ mpc52xx_psc_spi_transfer_setup(spi, NULL);
+
+ spi_finalize_current_message(ctlr);
+
+ return 0;
}
static int mpc52xx_psc_spi_setup(struct spi_device *spi)
{
- struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
struct mpc52xx_psc_spi_cs *cs = spi->controller_state;
- unsigned long flags;
if (spi->bits_per_word%8)
return -EINVAL;
cs->bits_per_word = spi->bits_per_word;
cs->speed_hz = spi->max_speed_hz;
- spin_lock_irqsave(&mps->lock, flags);
- if (!mps->busy)
- mpc52xx_psc_spi_deactivate_cs(spi);
- spin_unlock_irqrestore(&mps->lock, flags);
-
- return 0;
-}
-
-static int mpc52xx_psc_spi_transfer(struct spi_device *spi,
- struct spi_message *m)
-{
- struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- m->actual_length = 0;
- m->status = -EINPROGRESS;
-
- spin_lock_irqsave(&mps->lock, flags);
- list_add_tail(&m->queue, &mps->queue);
- schedule_work(&mps->work);
- spin_unlock_irqrestore(&mps->lock, flags);
-
return 0;
}
master->num_chipselect = pdata->max_chipselect;
}
master->setup = mpc52xx_psc_spi_setup;
- master->transfer = mpc52xx_psc_spi_transfer;
+ master->transfer_one_message = mpc52xx_psc_spi_transfer_one_message;
master->cleanup = mpc52xx_psc_spi_cleanup;
master->dev.of_node = dev->of_node;
goto free_irq;
}
- spin_lock_init(&mps->lock);
init_completion(&mps->done);
- INIT_WORK(&mps->work, mpc52xx_psc_spi_work);
- INIT_LIST_HEAD(&mps->queue);
ret = spi_register_master(master);
if (ret < 0)
struct spi_master *master = spi_master_get(platform_get_drvdata(op));
struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
- flush_work(&mps->work);
spi_unregister_master(master);
free_irq(mps->irq, mps);
if (mps->psc)
#define NPCM_FIU_UMA_DR1 0x34
#define NPCM_FIU_UMA_DR2 0x38
#define NPCM_FIU_UMA_DR3 0x3C
+#define NPCM_FIU_CFG 0x78
#define NPCM_FIU_MAX_REG_LIMIT 0x80
/* FIU Direct Read Configuration Register */
#define NPCM_FIU_UMA_DR3_RB13 GENMASK(15, 8)
#define NPCM_FIU_UMA_DR3_RB12 GENMASK(7, 0)
+/* FIU Configuration Register */
+#define NPCM_FIU_CFG_FIU_FIX BIT(31)
+
/* FIU Read Mode */
enum {
DRD_SINGLE_WIRE_MODE = 0,
FIU0 = 0,
FIU3,
FIUX,
+ FIU1,
};
struct npcm_fiu_info {
.fiu_max = 3,
};
+static const struct npcm_fiu_info npxm8xx_fiu_info[] = {
+ {.name = "FIU0", .fiu_id = FIU0,
+ .max_map_size = MAP_SIZE_128MB, .max_cs = 2},
+ {.name = "FIU3", .fiu_id = FIU3,
+ .max_map_size = MAP_SIZE_128MB, .max_cs = 4},
+ {.name = "FIUX", .fiu_id = FIUX,
+ .max_map_size = MAP_SIZE_16MB, .max_cs = 2},
+ {.name = "FIU1", .fiu_id = FIU1,
+ .max_map_size = MAP_SIZE_16MB, .max_cs = 4} };
+
+static const struct fiu_data npxm8xx_fiu_data = {
+ .npcm_fiu_data_info = npxm8xx_fiu_info,
+ .fiu_max = 4,
+};
+
struct npcm_fiu_spi;
struct npcm_fiu_chip {
fiu->drd_op.addr.buswidth = op->addr.buswidth;
regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
NPCM_FIU_DRD_CFG_DBW,
- ((op->dummy.nbytes * ilog2(op->addr.buswidth)) / BITS_PER_BYTE)
- << NPCM_FIU_DRD_DBW_SHIFT);
+ op->dummy.nbytes << NPCM_FIU_DRD_DBW_SHIFT);
fiu->drd_op.dummy.nbytes = op->dummy.nbytes;
regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
NPCM_FIU_DRD_CFG_RDCMD, op->cmd.opcode);
regmap_update_bits(gcr_regmap, NPCM7XX_INTCR3_OFFSET,
NPCM7XX_INTCR3_FIU_FIX,
NPCM7XX_INTCR3_FIU_FIX);
+ } else {
+ regmap_update_bits(fiu->regmap, NPCM_FIU_CFG,
+ NPCM_FIU_CFG_FIU_FIX,
+ NPCM_FIU_CFG_FIU_FIX);
}
if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN) {
static const struct of_device_id npcm_fiu_dt_ids[] = {
{ .compatible = "nuvoton,npcm750-fiu", .data = &npcm7xx_fiu_data },
+ { .compatible = "nuvoton,npcm845-fiu", .data = &npxm8xx_fiu_data },
{ /* sentinel */ }
};
{ PCI_VDEVICE(INTEL, 0x7aab), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x7af9), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x7afb), LPSS_CNL_SSP },
+ /* MTL-P */
+ { PCI_VDEVICE(INTEL, 0x7e27), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x7e30), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x7e46), LPSS_CNL_SSP },
/* CNL-LP */
{ PCI_VDEVICE(INTEL, 0x9daa), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x9dab), LPSS_CNL_SSP },
#include <linux/platform_data/spi-s3c64xx.h>
-#define MAX_SPI_PORTS 6
+#define MAX_SPI_PORTS 12
#define S3C64XX_SPI_QUIRK_POLL (1 << 0)
#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1)
#define AUTOSUSPEND_TIMEOUT 2000
#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17)
#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17)
#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17)
+#define S3C64XX_SPI_MODE_SELF_LOOPBACK (1<<3)
#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2)
#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1)
#define S3C64XX_SPI_MODE_4BURST (1<<0)
* @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
* @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
* @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
+ * @clk_div: Internal clock divider
* @quirks: Bitmask of known quirks
* @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
* @clk_from_cmu: True, if the controller does not include a clock mux and
* prescaler unit.
* @clk_ioclk: True if clock is present on this device
+ * @has_loopback: True if loopback mode can be supported
*
* The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
* differ in some aspects such as the size of the fifo and spi bus clock
int rx_lvl_offset;
int tx_st_done;
int quirks;
+ int clk_div;
bool high_speed;
bool clk_from_cmu;
bool clk_ioclk;
+ bool has_loopback;
};
/**
if (is_polling(sdd))
return 0;
+ /* Requests DMA channels */
+ sdd->rx_dma.ch = dma_request_chan(&sdd->pdev->dev, "rx");
+ if (IS_ERR(sdd->rx_dma.ch)) {
+ dev_err(&sdd->pdev->dev, "Failed to get RX DMA channel\n");
+ sdd->rx_dma.ch = NULL;
+ return 0;
+ }
+
+ sdd->tx_dma.ch = dma_request_chan(&sdd->pdev->dev, "tx");
+ if (IS_ERR(sdd->tx_dma.ch)) {
+ dev_err(&sdd->pdev->dev, "Failed to get TX DMA channel\n");
+ dma_release_channel(sdd->rx_dma.ch);
+ sdd->tx_dma.ch = NULL;
+ sdd->rx_dma.ch = NULL;
+ return 0;
+ }
+
spi->dma_rx = sdd->rx_dma.ch;
spi->dma_tx = sdd->tx_dma.ch;
return 0;
}
+static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
+
+ if (is_polling(sdd))
+ return 0;
+
+ /* Releases DMA channels if they are allocated */
+ if (sdd->rx_dma.ch && sdd->tx_dma.ch) {
+ dma_release_channel(sdd->rx_dma.ch);
+ dma_release_channel(sdd->tx_dma.ch);
+ sdd->rx_dma.ch = 0;
+ sdd->tx_dma.ch = 0;
+ }
+
+ return 0;
+}
+
static bool s3c64xx_spi_can_dma(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
+ if (sdd->rx_dma.ch && sdd->tx_dma.ch) {
+ return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
+ } else {
+ return false;
+ }
+
}
static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
void __iomem *regs = sdd->regs;
int ret;
u32 val;
+ int div = sdd->port_conf->clk_div;
/* Disable Clock */
if (!sdd->port_conf->clk_from_cmu) {
break;
}
+ if ((sdd->cur_mode & SPI_LOOP) && sdd->port_conf->has_loopback)
+ val |= S3C64XX_SPI_MODE_SELF_LOOPBACK;
+
writel(val, regs + S3C64XX_SPI_MODE_CFG);
if (sdd->port_conf->clk_from_cmu) {
- /* The src_clk clock is divided internally by 2 */
- ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
+ ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * div);
if (ret)
return ret;
- sdd->cur_speed = clk_get_rate(sdd->src_clk) / 2;
+ sdd->cur_speed = clk_get_rate(sdd->src_clk) / div;
} else {
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
val &= ~S3C64XX_SPI_PSR_MASK;
- val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
+ val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / div - 1)
& S3C64XX_SPI_PSR_MASK);
writel(val, regs + S3C64XX_SPI_CLK_CFG);
sdd->rx_dma.ch && sdd->tx_dma.ch) {
use_dma = 1;
- } else if (is_polling(sdd) && xfer->len > fifo_len) {
+ } else if (xfer->len > fifo_len) {
tx_buf = xfer->tx_buf;
rx_buf = xfer->rx_buf;
origin_len = xfer->len;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
struct s3c64xx_spi_driver_data *sdd;
int err;
+ int div;
sdd = spi_master_get_devdata(spi->master);
if (spi->dev.of_node) {
pm_runtime_get_sync(&sdd->pdev->dev);
+ div = sdd->port_conf->clk_div;
+
/* Check if we can provide the requested rate */
if (!sdd->port_conf->clk_from_cmu) {
u32 psr, speed;
/* Max possible */
- speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1);
+ speed = clk_get_rate(sdd->src_clk) / div / (0 + 1);
if (spi->max_speed_hz > speed)
spi->max_speed_hz = speed;
- psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
+ psr = clk_get_rate(sdd->src_clk) / div / spi->max_speed_hz - 1;
psr &= S3C64XX_SPI_PSR_MASK;
if (psr == S3C64XX_SPI_PSR_MASK)
psr--;
- speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
+ speed = clk_get_rate(sdd->src_clk) / div / (psr + 1);
if (spi->max_speed_hz < speed) {
if (psr+1 < S3C64XX_SPI_PSR_MASK) {
psr++;
}
}
- speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
+ speed = clk_get_rate(sdd->src_clk) / div / (psr + 1);
if (spi->max_speed_hz >= speed) {
spi->max_speed_hz = speed;
} else {
master->setup = s3c64xx_spi_setup;
master->cleanup = s3c64xx_spi_cleanup;
master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
+ master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
master->prepare_message = s3c64xx_spi_prepare_message;
master->transfer_one = s3c64xx_spi_transfer_one;
master->num_chipselect = sci->num_cs;
SPI_BPW_MASK(8);
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ if (sdd->port_conf->has_loopback)
+ master->mode_bits |= SPI_LOOP;
master->auto_runtime_pm = true;
if (!is_polling(sdd))
master->can_dma = s3c64xx_spi_can_dma;
}
}
- if (!is_polling(sdd)) {
- /* Acquire DMA channels */
- sdd->rx_dma.ch = dma_request_chan(&pdev->dev, "rx");
- if (IS_ERR(sdd->rx_dma.ch)) {
- dev_err(&pdev->dev, "Failed to get RX DMA channel\n");
- ret = PTR_ERR(sdd->rx_dma.ch);
- goto err_disable_io_clk;
- }
- sdd->tx_dma.ch = dma_request_chan(&pdev->dev, "tx");
- if (IS_ERR(sdd->tx_dma.ch)) {
- dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
- ret = PTR_ERR(sdd->tx_dma.ch);
- goto err_release_rx_dma;
- }
- }
-
pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
- if (!is_polling(sdd))
- dma_release_channel(sdd->tx_dma.ch);
-err_release_rx_dma:
- if (!is_polling(sdd))
- dma_release_channel(sdd->rx_dma.ch);
-err_disable_io_clk:
clk_disable_unprepare(sdd->ioclk);
err_disable_src_clk:
clk_disable_unprepare(sdd->src_clk);
.fifo_lvl_mask = { 0x7f },
.rx_lvl_offset = 13,
.tx_st_done = 21,
+ .clk_div = 2,
.high_speed = true,
};
.fifo_lvl_mask = { 0x7f, 0x7F },
.rx_lvl_offset = 13,
.tx_st_done = 21,
+ .clk_div = 2,
};
static const struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
.fifo_lvl_mask = { 0x1ff, 0x7F },
.rx_lvl_offset = 15,
.tx_st_done = 25,
+ .clk_div = 2,
.high_speed = true,
};
.fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
.rx_lvl_offset = 15,
.tx_st_done = 25,
+ .clk_div = 2,
.high_speed = true,
.clk_from_cmu = true,
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
.fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff},
.rx_lvl_offset = 15,
.tx_st_done = 25,
+ .clk_div = 2,
.high_speed = true,
.clk_from_cmu = true,
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
.fifo_lvl_mask = { 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff},
.rx_lvl_offset = 15,
.tx_st_done = 25,
+ .clk_div = 2,
+ .high_speed = true,
+ .clk_from_cmu = true,
+ .clk_ioclk = true,
+ .quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
+};
+
+static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = {
+ .fifo_lvl_mask = { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f,
+ 0x7f, 0x7f, 0x7f, 0x7f},
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+ .clk_div = 4,
.high_speed = true,
.clk_from_cmu = true,
.clk_ioclk = true,
+ .has_loopback = true,
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
};
-static struct s3c64xx_spi_port_config fsd_spi_port_config = {
+static const struct s3c64xx_spi_port_config fsd_spi_port_config = {
.fifo_lvl_mask = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},
.rx_lvl_offset = 15,
.tx_st_done = 25,
+ .clk_div = 2,
.high_speed = true,
.clk_from_cmu = true,
.clk_ioclk = false,
{ .compatible = "samsung,exynos5433-spi",
.data = (void *)&exynos5433_spi_port_config,
},
+ { .compatible = "samsung,exynosautov9-spi",
+ .data = (void *)&exynosautov9_spi_port_config,
+ },
{ .compatible = "tesla,fsd-spi",
.data = (void *)&fsd_spi_port_config,
},
void __iomem *addr;
int irq;
struct spi_master *master;
- struct list_head queue;
- struct work_struct ws;
unsigned long cr1;
wait_queue_head_t wait;
- spinlock_t lock;
int width;
};
return 0;
}
-static void spi_sh_work(struct work_struct *work)
+static int spi_sh_transfer_one_message(struct spi_controller *ctlr,
+ struct spi_message *mesg)
{
- struct spi_sh_data *ss = container_of(work, struct spi_sh_data, ws);
- struct spi_message *mesg;
+ struct spi_sh_data *ss = spi_controller_get_devdata(ctlr);
struct spi_transfer *t;
- unsigned long flags;
int ret;
pr_debug("%s: enter\n", __func__);
- spin_lock_irqsave(&ss->lock, flags);
- while (!list_empty(&ss->queue)) {
- mesg = list_entry(ss->queue.next, struct spi_message, queue);
- list_del_init(&mesg->queue);
-
- spin_unlock_irqrestore(&ss->lock, flags);
- list_for_each_entry(t, &mesg->transfers, transfer_list) {
- pr_debug("tx_buf = %p, rx_buf = %p\n",
- t->tx_buf, t->rx_buf);
- pr_debug("len = %d, delay.value = %d\n",
- t->len, t->delay.value);
-
- if (t->tx_buf) {
- ret = spi_sh_send(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- if (t->rx_buf) {
- ret = spi_sh_receive(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- mesg->actual_length += t->len;
- }
- spin_lock_irqsave(&ss->lock, flags);
+ spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
- mesg->status = 0;
- if (mesg->complete)
- mesg->complete(mesg->context);
+ list_for_each_entry(t, &mesg->transfers, transfer_list) {
+ pr_debug("tx_buf = %p, rx_buf = %p\n",
+ t->tx_buf, t->rx_buf);
+ pr_debug("len = %d, delay.value = %d\n",
+ t->len, t->delay.value);
+
+ if (t->tx_buf) {
+ ret = spi_sh_send(ss, mesg, t);
+ if (ret < 0)
+ goto error;
+ }
+ if (t->rx_buf) {
+ ret = spi_sh_receive(ss, mesg, t);
+ if (ret < 0)
+ goto error;
+ }
+ mesg->actual_length += t->len;
}
+ mesg->status = 0;
+ spi_finalize_current_message(ctlr);
+
clear_fifo(ss);
spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1);
udelay(100);
clear_fifo(ss);
- spin_unlock_irqrestore(&ss->lock, flags);
-
- return;
+ return 0;
error:
mesg->status = ret;
+ spi_finalize_current_message(ctlr);
if (mesg->complete)
mesg->complete(mesg->context);
SPI_SH_CR1);
clear_fifo(ss);
+ return ret;
}
static int spi_sh_setup(struct spi_device *spi)
return 0;
}
-static int spi_sh_transfer(struct spi_device *spi, struct spi_message *mesg)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- pr_debug("%s: enter\n", __func__);
- pr_debug("\tmode = %02x\n", spi->mode);
-
- spin_lock_irqsave(&ss->lock, flags);
-
- mesg->actual_length = 0;
- mesg->status = -EINPROGRESS;
-
- spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- list_add_tail(&mesg->queue, &ss->queue);
- schedule_work(&ss->ws);
-
- spin_unlock_irqrestore(&ss->lock, flags);
-
- return 0;
-}
-
static void spi_sh_cleanup(struct spi_device *spi)
{
struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
struct spi_sh_data *ss = platform_get_drvdata(pdev);
spi_unregister_master(ss->master);
- flush_work(&ss->ws);
free_irq(ss->irq, ss);
return 0;
dev_err(&pdev->dev, "ioremap error.\n");
return -ENOMEM;
}
- INIT_LIST_HEAD(&ss->queue);
- spin_lock_init(&ss->lock);
- INIT_WORK(&ss->ws, spi_sh_work);
init_waitqueue_head(&ss->wait);
ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
master->num_chipselect = 2;
master->bus_num = pdev->id;
master->setup = spi_sh_setup;
- master->transfer = spi_sh_transfer;
+ master->transfer_one_message = spi_sh_transfer_one_message;
master->cleanup = spi_sh_cleanup;
ret = spi_register_master(master);
return 0;
}
+static int sifive_spi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sifive_spi *spi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = spi_master_suspend(master);
+ if (ret)
+ return ret;
+
+ /* Disable all the interrupts just in case */
+ sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
+
+ clk_disable_unprepare(spi->clk);
+
+ return ret;
+}
+
+static int sifive_spi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sifive_spi *spi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = clk_prepare_enable(spi->clk);
+ if (ret)
+ return ret;
+ ret = spi_master_resume(master);
+ if (ret)
+ clk_disable_unprepare(spi->clk);
+
+ return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sifive_spi_pm_ops,
+ sifive_spi_suspend, sifive_spi_resume);
+
+
static const struct of_device_id sifive_spi_of_match[] = {
{ .compatible = "sifive,spi0", },
{}
.remove = sifive_spi_remove,
.driver = {
.name = SIFIVE_SPI_DRIVER_NAME,
+ .pm = &sifive_spi_pm_ops,
.of_match_table = sifive_spi_of_match,
},
};
STM32_BUSY_TIMEOUT_US);
}
-static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
- const struct spi_mem_op *op)
+static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi)
{
u32 cr, sr;
int err = 0;
return err;
}
-static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi,
- const struct spi_mem_op *op)
+static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi)
{
u32 cr;
return 0;
}
-static int stm32_qspi_get_mode(struct stm32_qspi *qspi, u8 buswidth)
+static int stm32_qspi_get_mode(u8 buswidth)
{
if (buswidth == 4)
return CCR_BUSWIDTH_4;
ccr = qspi->fmode;
ccr |= FIELD_PREP(CCR_INST_MASK, op->cmd.opcode);
ccr |= FIELD_PREP(CCR_IMODE_MASK,
- stm32_qspi_get_mode(qspi, op->cmd.buswidth));
+ stm32_qspi_get_mode(op->cmd.buswidth));
if (op->addr.nbytes) {
ccr |= FIELD_PREP(CCR_ADMODE_MASK,
- stm32_qspi_get_mode(qspi, op->addr.buswidth));
+ stm32_qspi_get_mode(op->addr.buswidth));
ccr |= FIELD_PREP(CCR_ADSIZE_MASK, op->addr.nbytes - 1);
}
if (op->data.nbytes) {
ccr |= FIELD_PREP(CCR_DMODE_MASK,
- stm32_qspi_get_mode(qspi, op->data.buswidth));
+ stm32_qspi_get_mode(op->data.buswidth));
}
writel_relaxed(ccr, qspi->io_base + QSPI_CCR);
writel_relaxed(op->addr.val, qspi->io_base + QSPI_AR);
if (qspi->fmode == CCR_FMODE_APM)
- err_poll_status = stm32_qspi_wait_poll_status(qspi, op);
+ err_poll_status = stm32_qspi_wait_poll_status(qspi);
err = stm32_qspi_tx(qspi, op);
goto abort;
/* wait end of tx in indirect mode */
- err = stm32_qspi_wait_cmd(qspi, op);
+ err = stm32_qspi_wait_cmd(qspi);
if (err)
goto abort;
ret = synquacer_spi_enable(master);
if (ret) {
+ clk_disable_unprepare(sspi->clk);
dev_err(dev, "failed to enable spi (%d)\n", ret);
return ret;
}
static int tegra_slink_remove(struct platform_device *pdev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
if (tspi->rx_dma_chan)
tegra_slink_deinit_dma_param(tspi, true);
+ spi_master_put(master);
return 0;
}
#define QSPI_RX_EN BIT(12)
#define QSPI_CS_SW_VAL BIT(20)
#define QSPI_CS_SW_HW BIT(21)
+
+#define QSPI_CS_POL_INACTIVE(n) (1 << (22 + (n)))
+#define QSPI_CS_POL_INACTIVE_MASK (0xF << 22)
+#define QSPI_CS_SEL_0 (0 << 26)
+#define QSPI_CS_SEL_1 (1 << 26)
+#define QSPI_CS_SEL_2 (2 << 26)
+#define QSPI_CS_SEL_3 (3 << 26)
+#define QSPI_CS_SEL_MASK (3 << 26)
+#define QSPI_CS_SEL(x) (((x) & 0x3) << 26)
+
#define QSPI_CONTROL_MODE_0 (0 << 28)
#define QSPI_CONTROL_MODE_3 (3 << 28)
#define QSPI_CONTROL_MODE_MASK (3 << 28)
struct tegra_qspi_soc_data {
bool has_dma;
bool cmb_xfer_capable;
+ unsigned int cs_count;
};
struct tegra_qspi_client_data {
tegra_qspi_mask_clear_irq(tqspi);
command1 = tqspi->def_command1_reg;
+ command1 |= QSPI_CS_SEL(spi->chip_select);
command1 |= QSPI_BIT_LENGTH(bits_per_word - 1);
command1 &= ~QSPI_CONTROL_MODE_MASK;
/* keep default cs state to inactive */
val = tqspi->def_command1_reg;
+ val |= QSPI_CS_SEL(spi->chip_select);
if (spi->mode & SPI_CS_HIGH)
- val &= ~QSPI_CS_SW_VAL;
+ val &= ~QSPI_CS_POL_INACTIVE(spi->chip_select);
else
- val |= QSPI_CS_SW_VAL;
+ val |= QSPI_CS_POL_INACTIVE(spi->chip_select);
tqspi->def_command1_reg = val;
tegra_qspi_writel(tqspi, tqspi->def_command1_reg, QSPI_COMMAND1);
static struct tegra_qspi_soc_data tegra210_qspi_soc_data = {
.has_dma = true,
.cmb_xfer_capable = false,
+ .cs_count = 1,
};
static struct tegra_qspi_soc_data tegra186_qspi_soc_data = {
.has_dma = true,
.cmb_xfer_capable = true,
+ .cs_count = 1,
};
static struct tegra_qspi_soc_data tegra234_qspi_soc_data = {
.has_dma = false,
.cmb_xfer_capable = true,
+ .cs_count = 1,
+};
+
+static struct tegra_qspi_soc_data tegra241_qspi_soc_data = {
+ .has_dma = false,
+ .cmb_xfer_capable = true,
+ .cs_count = 4,
};
static const struct of_device_id tegra_qspi_of_match[] = {
}, {
.compatible = "nvidia,tegra234-qspi",
.data = &tegra234_qspi_soc_data,
+ }, {
+ .compatible = "nvidia,tegra241-qspi",
+ .data = &tegra241_qspi_soc_data,
},
{}
};
}, {
.id = "NVDA1413",
.driver_data = (kernel_ulong_t)&tegra234_qspi_soc_data,
+ }, {
+ .id = "NVDA1513",
+ .driver_data = (kernel_ulong_t)&tegra241_qspi_soc_data,
},
{}
};
spin_lock_init(&tqspi->lock);
tqspi->soc_data = device_get_match_data(&pdev->dev);
+ master->num_chipselect = tqspi->soc_data->cs_count;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tqspi->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(tqspi->base))
void *rx_bb_addr;
struct dma_chan *rx_chan;
- u32 spi_max_frequency;
u32 cmd;
u32 dc;
static int ti_qspi_setup(struct spi_device *spi)
{
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
- struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
- int clk_div = 0, ret;
- u32 clk_ctrl_reg, clk_rate, clk_mask;
+ int ret;
if (spi->master->busy) {
dev_dbg(qspi->dev, "master busy doing other transfers\n");
return -EBUSY;
}
- if (!qspi->spi_max_frequency) {
+ if (!qspi->master->max_speed_hz) {
dev_err(qspi->dev, "spi max frequency not defined\n");
return -EINVAL;
}
- clk_rate = clk_get_rate(qspi->fclk);
-
- clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1;
-
- if (clk_div < 0) {
- dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n");
- return -EINVAL;
- }
-
- if (clk_div > QSPI_CLK_DIV_MAX) {
- dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n",
- QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
- return -EINVAL;
- }
-
- dev_dbg(qspi->dev, "hz: %d, clock divider %d\n",
- qspi->spi_max_frequency, clk_div);
+ spi->max_speed_hz = min(spi->max_speed_hz, qspi->master->max_speed_hz);
ret = pm_runtime_resume_and_get(qspi->dev);
if (ret < 0) {
return ret;
}
- clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
-
- clk_ctrl_reg &= ~QSPI_CLK_EN;
-
- /* disable SCLK */
- ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
-
- /* enable SCLK */
- clk_mask = QSPI_CLK_EN | clk_div;
- ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
- ctx_reg->clkctrl = clk_mask;
-
pm_runtime_mark_last_busy(qspi->dev);
ret = pm_runtime_put_autosuspend(qspi->dev);
if (ret < 0) {
return 0;
}
+static void ti_qspi_setup_clk(struct ti_qspi *qspi, u32 speed_hz)
+{
+ struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
+ int clk_div;
+ u32 clk_ctrl_reg, clk_rate, clk_ctrl_new;
+
+ clk_rate = clk_get_rate(qspi->fclk);
+ clk_div = DIV_ROUND_UP(clk_rate, speed_hz) - 1;
+ clk_div = clamp(clk_div, 0, QSPI_CLK_DIV_MAX);
+ dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", speed_hz, clk_div);
+
+ pm_runtime_resume_and_get(qspi->dev);
+
+ clk_ctrl_new = QSPI_CLK_EN | clk_div;
+ if (ctx_reg->clkctrl != clk_ctrl_new) {
+ clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
+
+ clk_ctrl_reg &= ~QSPI_CLK_EN;
+
+ /* disable SCLK */
+ ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
+
+ /* enable SCLK */
+ ti_qspi_write(qspi, clk_ctrl_new, QSPI_SPI_CLOCK_CNTRL_REG);
+ ctx_reg->clkctrl = clk_ctrl_new;
+ }
+
+ pm_runtime_mark_last_busy(qspi->dev);
+ pm_runtime_put_autosuspend(qspi->dev);
+}
+
static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
{
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
mutex_lock(&qspi->list_lock);
- if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
+ if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select) {
+ ti_qspi_setup_clk(qspi, mem->spi->max_speed_hz);
ti_qspi_enable_memory_map(mem->spi);
+ }
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
op->addr.nbytes, op->dummy.nbytes);
wlen = t->bits_per_word >> 3;
transfer_len_words = min(t->len / wlen, frame_len_words);
+ ti_qspi_setup_clk(qspi, t->speed_hz);
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
if (ret) {
dev_dbg(qspi->dev, "transfer message failed\n");
pm_runtime_enable(&pdev->dev);
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
- qspi->spi_max_frequency = max_freq;
+ master->max_speed_hz = max_freq;
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
{
-
- struct spi_transfer *transfer;
struct pch_spi_data *data = spi_master_get_devdata(pspi->master);
int retval;
unsigned long flags;
- spin_lock_irqsave(&data->lock, flags);
- /* validate Tx/Rx buffers and Transfer length */
- list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
- if (!transfer->tx_buf && !transfer->rx_buf) {
- dev_err(&pspi->dev,
- "%s Tx and Rx buffer NULL\n", __func__);
- retval = -EINVAL;
- goto err_return_spinlock;
- }
-
- if (!transfer->len) {
- dev_err(&pspi->dev, "%s Transfer length invalid\n",
- __func__);
- retval = -EINVAL;
- goto err_return_spinlock;
- }
-
- dev_dbg(&pspi->dev,
- "%s Tx/Rx buffer valid. Transfer length valid\n",
- __func__);
- }
- spin_unlock_irqrestore(&data->lock, flags);
-
/* We won't process any messages if we have been asked to terminate */
if (data->status == STATUS_EXITING) {
dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
err_out:
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
return retval;
-err_return_spinlock:
- dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
- spin_unlock_irqrestore(&data->lock, flags);
- return retval;
}
static inline void pch_spi_select_chip(struct pch_spi_data *data,
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->max_speed_hz = PCH_MAX_BAUDRATE;
+ master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
data->board_dat = board_dat;
data->plat_dev = plat_dev;
#define GQSPI_DMA_UNALIGN 0x3
#define GQSPI_DEFAULT_NUM_CS 1 /* Default number of chip selects */
+#define GQSPI_MAX_NUM_CS 2 /* Maximum number of chip selects */
+
#define SPI_AUTOSUSPEND_TIMEOUT 3000
enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
if (!is_high) {
- xqspi->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
- xqspi->genfifocs = GQSPI_GENFIFO_CS_LOWER;
+ if (!qspi->chip_select) {
+ xqspi->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
+ xqspi->genfifocs = GQSPI_GENFIFO_CS_LOWER;
+ } else {
+ xqspi->genfifobus = GQSPI_GENFIFO_BUS_UPPER;
+ xqspi->genfifocs = GQSPI_GENFIFO_CS_UPPER;
+ }
genfifoentry |= xqspi->genfifobus;
genfifoentry |= xqspi->genfifocs;
genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
struct zynqmp_qspi *xqspi;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ u32 num_cs;
ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
if (!ctlr)
if (ret)
goto clk_dis_all;
+ ret = of_property_read_u32(np, "num-cs", &num_cs);
+ if (ret < 0) {
+ ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
+ } else if (num_cs > GQSPI_MAX_NUM_CS) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "only %d chip selects are available\n",
+ GQSPI_MAX_NUM_CS);
+ goto clk_dis_all;
+ } else {
+ ctlr->num_chipselect = num_cs;
+ }
+
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
- ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
ctlr->mem_ops = &zynqmp_qspi_mem_ops;
ctlr->setup = zynqmp_qspi_setup_op;
ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
#include <linux/idr.h>
#include <linux/platform_data/x86/apple.h>
#include <linux/ptp_clock_kernel.h>
+#include <linux/percpu.h>
#define CREATE_TRACE_POINTS
#include <trace/events/spi.h>
spi_controller_put(spi->controller);
kfree(spi->driver_override);
+ free_percpu(spi->pcpu_statistics);
kfree(spi);
}
}
static DEVICE_ATTR_RW(driver_override);
+static struct spi_statistics *spi_alloc_pcpu_stats(struct device *dev)
+{
+ struct spi_statistics __percpu *pcpu_stats;
+
+ if (dev)
+ pcpu_stats = devm_alloc_percpu(dev, struct spi_statistics);
+ else
+ pcpu_stats = alloc_percpu_gfp(struct spi_statistics, GFP_KERNEL);
+
+ if (pcpu_stats) {
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct spi_statistics *stat;
+
+ stat = per_cpu_ptr(pcpu_stats, cpu);
+ u64_stats_init(&stat->syncp);
+ }
+ }
+ return pcpu_stats;
+}
+
+#define spi_pcpu_stats_totalize(ret, in, field) \
+do { \
+ int i; \
+ ret = 0; \
+ for_each_possible_cpu(i) { \
+ const struct spi_statistics *pcpu_stats; \
+ u64 inc; \
+ unsigned int start; \
+ pcpu_stats = per_cpu_ptr(in, i); \
+ do { \
+ start = u64_stats_fetch_begin_irq( \
+ &pcpu_stats->syncp); \
+ inc = u64_stats_read(&pcpu_stats->field); \
+ } while (u64_stats_fetch_retry_irq( \
+ &pcpu_stats->syncp, start)); \
+ ret += inc; \
+ } \
+} while (0)
+
#define SPI_STATISTICS_ATTRS(field, file) \
static ssize_t spi_controller_##field##_show(struct device *dev, \
struct device_attribute *attr, \
{ \
struct spi_controller *ctlr = container_of(dev, \
struct spi_controller, dev); \
- return spi_statistics_##field##_show(&ctlr->statistics, buf); \
+ return spi_statistics_##field##_show(ctlr->pcpu_statistics, buf); \
} \
static struct device_attribute dev_attr_spi_controller_##field = { \
.attr = { .name = file, .mode = 0444 }, \
char *buf) \
{ \
struct spi_device *spi = to_spi_device(dev); \
- return spi_statistics_##field##_show(&spi->statistics, buf); \
+ return spi_statistics_##field##_show(spi->pcpu_statistics, buf); \
} \
static struct device_attribute dev_attr_spi_device_##field = { \
.attr = { .name = file, .mode = 0444 }, \
.show = spi_device_##field##_show, \
}
-#define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \
+#define SPI_STATISTICS_SHOW_NAME(name, file, field) \
static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
char *buf) \
{ \
- unsigned long flags; \
ssize_t len; \
- spin_lock_irqsave(&stat->lock, flags); \
- len = sysfs_emit(buf, format_string "\n", stat->field); \
- spin_unlock_irqrestore(&stat->lock, flags); \
+ u64 val; \
+ spi_pcpu_stats_totalize(val, stat, field); \
+ len = sysfs_emit(buf, "%llu\n", val); \
return len; \
} \
SPI_STATISTICS_ATTRS(name, file)
-#define SPI_STATISTICS_SHOW(field, format_string) \
+#define SPI_STATISTICS_SHOW(field) \
SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
- field, format_string)
+ field)
-SPI_STATISTICS_SHOW(messages, "%lu");
-SPI_STATISTICS_SHOW(transfers, "%lu");
-SPI_STATISTICS_SHOW(errors, "%lu");
-SPI_STATISTICS_SHOW(timedout, "%lu");
+SPI_STATISTICS_SHOW(messages);
+SPI_STATISTICS_SHOW(transfers);
+SPI_STATISTICS_SHOW(errors);
+SPI_STATISTICS_SHOW(timedout);
-SPI_STATISTICS_SHOW(spi_sync, "%lu");
-SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
-SPI_STATISTICS_SHOW(spi_async, "%lu");
+SPI_STATISTICS_SHOW(spi_sync);
+SPI_STATISTICS_SHOW(spi_sync_immediate);
+SPI_STATISTICS_SHOW(spi_async);
-SPI_STATISTICS_SHOW(bytes, "%llu");
-SPI_STATISTICS_SHOW(bytes_rx, "%llu");
-SPI_STATISTICS_SHOW(bytes_tx, "%llu");
+SPI_STATISTICS_SHOW(bytes);
+SPI_STATISTICS_SHOW(bytes_rx);
+SPI_STATISTICS_SHOW(bytes_tx);
#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
"transfer_bytes_histo_" number, \
- transfer_bytes_histo[index], "%lu")
+ transfer_bytes_histo[index])
SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
-SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
+SPI_STATISTICS_SHOW(transfers_split_maxsize);
static struct attribute *spi_dev_attrs[] = {
&dev_attr_modalias.attr,
NULL,
};
-static void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
+static void spi_statistics_add_transfer_stats(struct spi_statistics *pcpu_stats,
struct spi_transfer *xfer,
struct spi_controller *ctlr)
{
- unsigned long flags;
int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
+ struct spi_statistics *stats;
if (l2len < 0)
l2len = 0;
- spin_lock_irqsave(&stats->lock, flags);
+ get_cpu();
+ stats = this_cpu_ptr(pcpu_stats);
+ u64_stats_update_begin(&stats->syncp);
- stats->transfers++;
- stats->transfer_bytes_histo[l2len]++;
+ u64_stats_inc(&stats->transfers);
+ u64_stats_inc(&stats->transfer_bytes_histo[l2len]);
- stats->bytes += xfer->len;
+ u64_stats_add(&stats->bytes, xfer->len);
if ((xfer->tx_buf) &&
(xfer->tx_buf != ctlr->dummy_tx))
- stats->bytes_tx += xfer->len;
+ u64_stats_add(&stats->bytes_tx, xfer->len);
if ((xfer->rx_buf) &&
(xfer->rx_buf != ctlr->dummy_rx))
- stats->bytes_rx += xfer->len;
+ u64_stats_add(&stats->bytes_rx, xfer->len);
- spin_unlock_irqrestore(&stats->lock, flags);
+ u64_stats_update_end(&stats->syncp);
+ put_cpu();
}
/*
return NULL;
}
+ spi->pcpu_statistics = spi_alloc_pcpu_stats(NULL);
+ if (!spi->pcpu_statistics) {
+ kfree(spi);
+ spi_controller_put(ctlr);
+ return NULL;
+ }
+
spi->master = spi->controller = ctlr;
spi->dev.parent = &ctlr->dev;
spi->dev.bus = &spi_bus_type;
spi->dev.release = spidev_release;
spi->mode = ctlr->buswidth_override_bits;
- spin_lock_init(&spi->statistics.lock);
-
device_initialize(&spi->dev);
return spi;
}
struct spi_message *msg,
struct spi_transfer *xfer)
{
- struct spi_statistics *statm = &ctlr->statistics;
- struct spi_statistics *stats = &msg->spi->statistics;
+ struct spi_statistics *statm = ctlr->pcpu_statistics;
+ struct spi_statistics *stats = msg->spi->pcpu_statistics;
u32 speed_hz = xfer->speed_hz;
unsigned long long ms;
/* Nothing to do here */
break;
case SPI_DELAY_UNIT_SCK:
- /* clock cycles need to be obtained from spi_transfer */
+ /* Clock cycles need to be obtained from spi_transfer */
if (!xfer)
return -EINVAL;
/*
u32 unit = xfer->cs_change_delay.unit;
int ret;
- /* return early on "fast" mode - for everything but USECS */
+ /* Return early on "fast" mode - for everything but USECS */
if (!delay) {
if (unit == SPI_DELAY_UNIT_USECS)
_spi_transfer_delay_ns(default_delay_ns);
struct spi_transfer *xfer;
bool keep_cs = false;
int ret = 0;
- struct spi_statistics *statm = &ctlr->statistics;
- struct spi_statistics *stats = &msg->spi->statistics;
+ struct spi_statistics *statm = ctlr->pcpu_statistics;
+ struct spi_statistics *stats = msg->spi->pcpu_statistics;
spi_set_cs(msg->spi, true, false);
}
}
+static int __spi_pump_transfer_message(struct spi_controller *ctlr,
+ struct spi_message *msg, bool was_busy)
+{
+ struct spi_transfer *xfer;
+ int ret;
+
+ if (!was_busy && ctlr->auto_runtime_pm) {
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ pm_runtime_put_noidle(ctlr->dev.parent);
+ dev_err(&ctlr->dev, "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (!was_busy)
+ trace_spi_controller_busy(ctlr);
+
+ if (!was_busy && ctlr->prepare_transfer_hardware) {
+ ret = ctlr->prepare_transfer_hardware(ctlr);
+ if (ret) {
+ dev_err(&ctlr->dev,
+ "failed to prepare transfer hardware: %d\n",
+ ret);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+
+ msg->status = ret;
+ spi_finalize_current_message(ctlr);
+
+ return ret;
+ }
+ }
+
+ trace_spi_message_start(msg);
+
+ if (ctlr->prepare_message) {
+ ret = ctlr->prepare_message(ctlr, msg);
+ if (ret) {
+ dev_err(&ctlr->dev, "failed to prepare message: %d\n",
+ ret);
+ msg->status = ret;
+ spi_finalize_current_message(ctlr);
+ return ret;
+ }
+ msg->prepared = true;
+ }
+
+ ret = spi_map_msg(ctlr, msg);
+ if (ret) {
+ msg->status = ret;
+ spi_finalize_current_message(ctlr);
+ return ret;
+ }
+
+ if (!ctlr->ptp_sts_supported && !ctlr->transfer_one) {
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ xfer->ptp_sts_word_pre = 0;
+ ptp_read_system_prets(xfer->ptp_sts);
+ }
+ }
+
+ /*
+ * Drivers implementation of transfer_one_message() must arrange for
+ * spi_finalize_current_message() to get called. Most drivers will do
+ * this in the calling context, but some don't. For those cases, a
+ * completion is used to guarantee that this function does not return
+ * until spi_finalize_current_message() is done accessing
+ * ctlr->cur_msg.
+ * Use of the following two flags enable to opportunistically skip the
+ * use of the completion since its use involves expensive spin locks.
+ * In case of a race with the context that calls
+ * spi_finalize_current_message() the completion will always be used,
+ * due to strict ordering of these flags using barriers.
+ */
+ WRITE_ONCE(ctlr->cur_msg_incomplete, true);
+ WRITE_ONCE(ctlr->cur_msg_need_completion, false);
+ reinit_completion(&ctlr->cur_msg_completion);
+ smp_wmb(); /* Make these available to spi_finalize_current_message() */
+
+ ret = ctlr->transfer_one_message(ctlr, msg);
+ if (ret) {
+ dev_err(&ctlr->dev,
+ "failed to transfer one message from queue\n");
+ return ret;
+ }
+
+ WRITE_ONCE(ctlr->cur_msg_need_completion, true);
+ smp_mb(); /* See spi_finalize_current_message()... */
+ if (READ_ONCE(ctlr->cur_msg_incomplete))
+ wait_for_completion(&ctlr->cur_msg_completion);
+
+ return 0;
+}
+
/**
* __spi_pump_messages - function which processes spi message queue
* @ctlr: controller to process queue for
*/
static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
{
- struct spi_transfer *xfer;
struct spi_message *msg;
bool was_busy = false;
unsigned long flags;
int ret;
+ /* Take the IO mutex */
+ mutex_lock(&ctlr->io_mutex);
+
/* Lock queue */
spin_lock_irqsave(&ctlr->queue_lock, flags);
/* Make sure we are not already running a message */
- if (ctlr->cur_msg) {
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- return;
- }
-
- /* If another context is idling the device then defer */
- if (ctlr->idling) {
- kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- return;
- }
+ if (ctlr->cur_msg)
+ goto out_unlock;
/* Check if the queue is idle */
if (list_empty(&ctlr->queue) || !ctlr->running) {
- if (!ctlr->busy) {
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- return;
- }
+ if (!ctlr->busy)
+ goto out_unlock;
/* Defer any non-atomic teardown to the thread */
if (!in_kthread) {
!ctlr->unprepare_transfer_hardware) {
spi_idle_runtime_pm(ctlr);
ctlr->busy = false;
+ ctlr->queue_empty = true;
trace_spi_controller_idle(ctlr);
} else {
kthread_queue_work(ctlr->kworker,
&ctlr->pump_messages);
}
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- return;
+ goto out_unlock;
}
ctlr->busy = false;
- ctlr->idling = true;
spin_unlock_irqrestore(&ctlr->queue_lock, flags);
kfree(ctlr->dummy_rx);
trace_spi_controller_idle(ctlr);
spin_lock_irqsave(&ctlr->queue_lock, flags);
- ctlr->idling = false;
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- return;
+ ctlr->queue_empty = true;
+ goto out_unlock;
}
/* Extract head of queue */
ctlr->busy = true;
spin_unlock_irqrestore(&ctlr->queue_lock, flags);
- mutex_lock(&ctlr->io_mutex);
-
- if (!was_busy && ctlr->auto_runtime_pm) {
- ret = pm_runtime_resume_and_get(ctlr->dev.parent);
- if (ret < 0) {
- dev_err(&ctlr->dev, "Failed to power device: %d\n",
- ret);
- mutex_unlock(&ctlr->io_mutex);
- return;
- }
- }
-
- if (!was_busy)
- trace_spi_controller_busy(ctlr);
-
- if (!was_busy && ctlr->prepare_transfer_hardware) {
- ret = ctlr->prepare_transfer_hardware(ctlr);
- if (ret) {
- dev_err(&ctlr->dev,
- "failed to prepare transfer hardware: %d\n",
- ret);
-
- if (ctlr->auto_runtime_pm)
- pm_runtime_put(ctlr->dev.parent);
-
- msg->status = ret;
- spi_finalize_current_message(ctlr);
-
- mutex_unlock(&ctlr->io_mutex);
- return;
- }
- }
-
- trace_spi_message_start(msg);
-
- if (ctlr->prepare_message) {
- ret = ctlr->prepare_message(ctlr, msg);
- if (ret) {
- dev_err(&ctlr->dev, "failed to prepare message: %d\n",
- ret);
- msg->status = ret;
- spi_finalize_current_message(ctlr);
- goto out;
- }
- ctlr->cur_msg_prepared = true;
- }
-
- ret = spi_map_msg(ctlr, msg);
- if (ret) {
- msg->status = ret;
- spi_finalize_current_message(ctlr);
- goto out;
- }
-
- if (!ctlr->ptp_sts_supported && !ctlr->transfer_one) {
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- xfer->ptp_sts_word_pre = 0;
- ptp_read_system_prets(xfer->ptp_sts);
- }
- }
+ ret = __spi_pump_transfer_message(ctlr, msg, was_busy);
+ if (!ret)
+ kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
- ret = ctlr->transfer_one_message(ctlr, msg);
- if (ret) {
- dev_err(&ctlr->dev,
- "failed to transfer one message from queue: %d\n",
- ret);
- goto out;
- }
+ ctlr->cur_msg = NULL;
+ ctlr->fallback = false;
-out:
mutex_unlock(&ctlr->io_mutex);
/* Prod the scheduler in case transfer_one() was busy waiting */
if (!ret)
cond_resched();
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&ctlr->queue_lock, flags);
+ mutex_unlock(&ctlr->io_mutex);
}
/**
{
ctlr->running = false;
ctlr->busy = false;
+ ctlr->queue_empty = true;
ctlr->kworker = kthread_create_worker(0, dev_name(&ctlr->dev));
if (IS_ERR(ctlr->kworker)) {
struct spi_message *next;
unsigned long flags;
- /* get a pointer to the next message, if any */
+ /* Get a pointer to the next message, if any */
spin_lock_irqsave(&ctlr->queue_lock, flags);
next = list_first_entry_or_null(&ctlr->queue, struct spi_message,
queue);
{
struct spi_transfer *xfer;
struct spi_message *mesg;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&ctlr->queue_lock, flags);
mesg = ctlr->cur_msg;
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
if (!ctlr->ptp_sts_supported && !ctlr->transfer_one) {
list_for_each_entry(xfer, &mesg->transfers, transfer_list) {
*/
spi_res_release(ctlr, mesg);
- if (ctlr->cur_msg_prepared && ctlr->unprepare_message) {
+ if (mesg->prepared && ctlr->unprepare_message) {
ret = ctlr->unprepare_message(ctlr, mesg);
if (ret) {
dev_err(&ctlr->dev, "failed to unprepare message: %d\n",
}
}
- spin_lock_irqsave(&ctlr->queue_lock, flags);
- ctlr->cur_msg = NULL;
- ctlr->cur_msg_prepared = false;
- ctlr->fallback = false;
- kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
- spin_unlock_irqrestore(&ctlr->queue_lock, flags);
+ mesg->prepared = false;
+
+ WRITE_ONCE(ctlr->cur_msg_incomplete, false);
+ smp_mb(); /* See __spi_pump_transfer_message()... */
+ if (READ_ONCE(ctlr->cur_msg_need_completion))
+ complete(&ctlr->cur_msg_completion);
trace_spi_message_done(mesg);
msg->status = -EINPROGRESS;
list_add_tail(&msg->queue, &ctlr->queue);
+ ctlr->queue_empty = false;
if (!ctlr->busy && need_pump)
kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
if (lookup->index != -1 && lookup->n++ != lookup->index)
return 1;
- if (lookup->index == -1 && !ctlr)
- return -ENODEV;
-
status = acpi_get_handle(NULL,
sb->resource_source.string_ptr,
&parent_handle);
ctlr = acpi_spi_find_controller_by_adev(adev);
if (!ctlr)
- return -ENODEV;
+ return -EPROBE_DEFER;
lookup->ctlr = ctlr;
}
acpi_dev_free_resource_list(&resource_list);
if (ret < 0)
- /* found SPI in _CRS but it points to another controller */
- return ERR_PTR(-ENODEV);
+ /* Found SPI in _CRS but it points to another controller */
+ return ERR_PTR(ret);
if (!lookup.max_speed_hz &&
ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
return status;
if (ctlr->bus_num >= 0) {
- /* devices with a fixed bus num must check-in with the num */
+ /* Devices with a fixed bus num must check-in with the num */
mutex_lock(&board_lock);
id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
ctlr->bus_num + 1, GFP_KERNEL);
return id == -ENOSPC ? -EBUSY : id;
ctlr->bus_num = id;
} else if (ctlr->dev.of_node) {
- /* allocate dynamic bus number using Linux idr */
+ /* Allocate dynamic bus number using Linux idr */
id = of_alias_get_id(ctlr->dev.of_node, "spi");
if (id >= 0) {
ctlr->bus_num = id;
}
ctlr->bus_lock_flag = 0;
init_completion(&ctlr->xfer_completion);
+ init_completion(&ctlr->cur_msg_completion);
if (!ctlr->max_dma_len)
ctlr->max_dma_len = INT_MAX;
goto free_bus_id;
}
- /* setting last_cs to -1 means no chip selected */
+ /* Setting last_cs to -1 means no chip selected */
ctlr->last_cs = -1;
status = device_add(&ctlr->dev);
goto free_bus_id;
}
}
- /* add statistics */
- spin_lock_init(&ctlr->statistics.lock);
+ /* Add statistics */
+ ctlr->pcpu_statistics = spi_alloc_pcpu_stats(dev);
+ if (!ctlr->pcpu_statistics) {
+ dev_err(dev, "Error allocating per-cpu statistics\n");
+ status = -ENOMEM;
+ goto destroy_queue;
+ }
mutex_lock(&board_lock);
list_add_tail(&ctlr->list, &spi_controller_list);
acpi_register_spi_devices(ctlr);
return status;
+destroy_queue:
+ spi_destroy_queue(ctlr);
free_bus_id:
mutex_lock(&board_lock);
idr_remove(&spi_master_idr, ctlr->bus_num);
}
EXPORT_SYMBOL_GPL(spi_register_controller);
-static void devm_spi_unregister(void *ctlr)
+static void devm_spi_unregister(struct device *dev, void *res)
{
- spi_unregister_controller(ctlr);
+ spi_unregister_controller(*(struct spi_controller **)res);
}
/**
int devm_spi_register_controller(struct device *dev,
struct spi_controller *ctlr)
{
+ struct spi_controller **ptr;
int ret;
+ ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
ret = spi_register_controller(ctlr);
- if (ret)
- return ret;
+ if (!ret) {
+ *ptr = ctlr;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
- return devm_add_action_or_reset(dev, devm_spi_unregister, ctlr);
+ return ret;
}
EXPORT_SYMBOL_GPL(devm_spi_register_controller);
device_del(&ctlr->dev);
- /* free bus id */
+ /* Free bus id */
mutex_lock(&board_lock);
if (found == ctlr)
idr_remove(&spi_master_idr, id);
struct spi_replaced_transfers *rxfer = res;
size_t i;
- /* call extra callback if requested */
+ /* Call extra callback if requested */
if (rxfer->release)
rxfer->release(ctlr, msg, res);
- /* insert replaced transfers back into the message */
+ /* Insert replaced transfers back into the message */
list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
- /* remove the formerly inserted entries */
+ /* Remove the formerly inserted entries */
for (i = 0; i < rxfer->inserted; i++)
list_del(&rxfer->inserted_transfers[i].transfer_list);
}
struct spi_transfer *xfer;
size_t i;
- /* allocate the structure using spi_res */
+ /* Allocate the structure using spi_res */
rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
struct_size(rxfer, inserted_transfers, insert)
+ extradatasize,
if (!rxfer)
return ERR_PTR(-ENOMEM);
- /* the release code to invoke before running the generic release */
+ /* The release code to invoke before running the generic release */
rxfer->release = release;
- /* assign extradata */
+ /* Assign extradata */
if (extradatasize)
rxfer->extradata =
&rxfer->inserted_transfers[insert];
- /* init the replaced_transfers list */
+ /* Init the replaced_transfers list */
INIT_LIST_HEAD(&rxfer->replaced_transfers);
/*
*/
rxfer->replaced_after = xfer_first->transfer_list.prev;
- /* remove the requested number of transfers */
+ /* Remove the requested number of transfers */
for (i = 0; i < remove; i++) {
/*
* If the entry after replaced_after it is msg->transfers
if (rxfer->replaced_after->next == &msg->transfers) {
dev_err(&msg->spi->dev,
"requested to remove more spi_transfers than are available\n");
- /* insert replaced transfers back into the message */
+ /* Insert replaced transfers back into the message */
list_splice(&rxfer->replaced_transfers,
rxfer->replaced_after);
- /* free the spi_replace_transfer structure */
+ /* Free the spi_replace_transfer structure... */
spi_res_free(rxfer);
- /* and return with an error */
+ /* ...and return with an error */
return ERR_PTR(-EINVAL);
}
* based on the first transfer to get removed.
*/
for (i = 0; i < insert; i++) {
- /* we need to run in reverse order */
+ /* We need to run in reverse order */
xfer = &rxfer->inserted_transfers[insert - 1 - i];
- /* copy all spi_transfer data */
+ /* Copy all spi_transfer data */
memcpy(xfer, xfer_first, sizeof(*xfer));
- /* add to list */
+ /* Add to list */
list_add(&xfer->transfer_list, rxfer->replaced_after);
- /* clear cs_change and delay for all but the last */
+ /* Clear cs_change and delay for all but the last */
if (i) {
xfer->cs_change = false;
xfer->delay.value = 0;
}
}
- /* set up inserted */
+ /* Set up inserted... */
rxfer->inserted = insert;
- /* and register it with spi_res/spi_message */
+ /* ...and register it with spi_res/spi_message */
spi_res_add(msg, rxfer);
return rxfer;
size_t offset;
size_t count, i;
- /* calculate how many we have to replace */
+ /* Calculate how many we have to replace */
count = DIV_ROUND_UP(xfer->len, maxsize);
- /* create replacement */
+ /* Create replacement */
srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
if (IS_ERR(srt))
return PTR_ERR(srt);
*/
xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
- /* all the others need rx_buf/tx_buf also set */
+ /* All the others need rx_buf/tx_buf also set */
for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
- /* update rx_buf, tx_buf and dma */
+ /* Update rx_buf, tx_buf and dma */
if (xfers[i].rx_buf)
xfers[i].rx_buf += offset;
if (xfers[i].rx_dma)
if (xfers[i].tx_dma)
xfers[i].tx_dma += offset;
- /* update length */
+ /* Update length */
xfers[i].len = min(maxsize, xfers[i].len - offset);
}
*/
*xferp = &xfers[count - 1];
- /* increment statistics counters */
- SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
+ /* Increment statistics counters */
+ SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics,
transfers_split_maxsize);
- SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
+ SPI_STATISTICS_INCREMENT_FIELD(msg->spi->pcpu_statistics,
transfers_split_maxsize);
return 0;
return ret;
list_for_each_entry(xfer, &message->transfers, transfer_list) {
- /* don't change cs_change on the last entry in the list */
+ /* Don't change cs_change on the last entry in the list */
if (list_is_last(&xfer->transfer_list, &message->transfers))
break;
xfer->cs_change = 1;
!(spi->mode & SPI_TX_QUAD))
return -EINVAL;
}
- /* check transfer rx_nbits */
+ /* Check transfer rx_nbits */
if (xfer->rx_buf) {
if (spi->mode & SPI_NO_RX)
return -EINVAL;
message->spi = spi;
- SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async);
- SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
+ SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_async);
+ SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_async);
trace_spi_message_submit(message);
}
+static void __spi_transfer_message_noqueue(struct spi_controller *ctlr, struct spi_message *msg)
+{
+ bool was_busy;
+ int ret;
+
+ mutex_lock(&ctlr->io_mutex);
+
+ was_busy = ctlr->busy;
+
+ ctlr->cur_msg = msg;
+ ret = __spi_pump_transfer_message(ctlr, msg, was_busy);
+ if (ret)
+ goto out;
+
+ ctlr->cur_msg = NULL;
+ ctlr->fallback = false;
+
+ if (!was_busy) {
+ kfree(ctlr->dummy_rx);
+ ctlr->dummy_rx = NULL;
+ kfree(ctlr->dummy_tx);
+ ctlr->dummy_tx = NULL;
+ if (ctlr->unprepare_transfer_hardware &&
+ ctlr->unprepare_transfer_hardware(ctlr))
+ dev_err(&ctlr->dev,
+ "failed to unprepare transfer hardware\n");
+ spi_idle_runtime_pm(ctlr);
+ }
+
+out:
+ mutex_unlock(&ctlr->io_mutex);
+}
+
/*-------------------------------------------------------------------------*/
/*
DECLARE_COMPLETION_ONSTACK(done);
int status;
struct spi_controller *ctlr = spi->controller;
- unsigned long flags;
status = __spi_validate(spi, message);
if (status != 0)
return status;
- message->complete = spi_complete;
- message->context = &done;
message->spi = spi;
- SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_sync);
- SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
+ SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync);
+ SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_sync);
/*
- * If we're not using the legacy transfer method then we will
- * try to transfer in the calling context so special case.
- * This code would be less tricky if we could remove the
- * support for driver implemented message queues.
+ * Checking queue_empty here only guarantees async/sync message
+ * ordering when coming from the same context. It does not need to
+ * guard against reentrancy from a different context. The io_mutex
+ * will catch those cases.
*/
- if (ctlr->transfer == spi_queued_transfer) {
- spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
+ if (READ_ONCE(ctlr->queue_empty)) {
+ message->actual_length = 0;
+ message->status = -EINPROGRESS;
trace_spi_message_submit(message);
- status = __spi_queued_transfer(spi, message, false);
+ SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync_immediate);
+ SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_sync_immediate);
- spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
- } else {
- status = spi_async_locked(spi, message);
+ __spi_transfer_message_noqueue(ctlr, message);
+
+ return message->status;
}
+ /*
+ * There are messages in the async queue that could have originated
+ * from the same context, so we need to preserve ordering.
+ * Therefor we send the message to the async queue and wait until they
+ * are completed.
+ */
+ message->complete = spi_complete;
+ message->context = &done;
+ status = spi_async_locked(spi, message);
if (status == 0) {
- /* Push out the messages in the calling context if we can */
- if (ctlr->transfer == spi_queued_transfer) {
- SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
- spi_sync_immediate);
- SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
- spi_sync_immediate);
- __spi_pump_messages(ctlr, false);
- }
-
wait_for_completion(&done);
status = message->status;
}
message->context = NULL;
+
return status;
}
ctlr->bus_lock_flag = 1;
spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
- /* mutex remains locked until spi_bus_unlock is called */
+ /* Mutex remains locked until spi_bus_unlock() is called */
return 0;
}
}
EXPORT_SYMBOL_GPL(spi_bus_unlock);
-/* portable code must never pass more than 32 bytes */
+/* Portable code must never pass more than 32 bytes */
#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
static u8 *buf;
x[0].tx_buf = local_buf;
x[1].rx_buf = local_buf + n_tx;
- /* do the i/o */
+ /* Do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
memcpy(rxbuf, x[1].rx_buf, n_rx);
/*-------------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_OF_DYNAMIC)
-/* must call put_device() when done with returned spi_device device */
+/* Must call put_device() when done with returned spi_device device */
static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
{
struct device *dev = bus_find_device_by_of_node(&spi_bus_type, node);
return dev ? to_spi_device(dev) : NULL;
}
-/* the spi controllers are not using spi_bus, so we find it with another way */
+/* The spi controllers are not using spi_bus, so we find it with another way */
static struct spi_controller *of_find_spi_controller_by_node(struct device_node *node)
{
struct device *dev;
if (!dev)
return NULL;
- /* reference got in class_find_device */
+ /* Reference got in class_find_device */
return container_of(dev, struct spi_controller, dev);
}
case OF_RECONFIG_CHANGE_ADD:
ctlr = of_find_spi_controller_by_node(rd->dn->parent);
if (ctlr == NULL)
- return NOTIFY_OK; /* not for us */
+ return NOTIFY_OK; /* Not for us */
if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
put_device(&ctlr->dev);
break;
case OF_RECONFIG_CHANGE_REMOVE:
- /* already depopulated? */
+ /* Already depopulated? */
if (!of_node_check_flag(rd->dn, OF_POPULATED))
return NOTIFY_OK;
- /* find our device by node */
+ /* Find our device by node */
spi = of_find_spi_device_by_node(rd->dn);
if (spi == NULL)
- return NOTIFY_OK; /* no? not meant for us */
+ return NOTIFY_OK; /* No? not meant for us */
- /* unregister takes one ref away */
+ /* Unregister takes one ref away */
spi_unregister_device(spi);
- /* and put the reference of the find */
+ /* And put the reference of the find */
put_device(&spi->dev);
break;
}
static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu,
int cpu_idx)
{
- unsigned long max = arch_scale_cpu_capacity(cpu);
- unsigned long util;
+ unsigned long util = sched_cpu_util(cpu);
- util = sched_cpu_util(cpu, max);
- return (util * 100) / max;
+ return (util * 100) / arch_scale_cpu_capacity(cpu);
}
#else /* !CONFIG_SMP */
static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu,
.compatible = "renesas,r8a779a0-thermal",
.data = &rcar_gen3_ths_tj_1,
},
+ {
+ .compatible = "renesas,r8a779f0-thermal",
+ .data = &rcar_gen3_ths_tj_1,
+ },
{},
};
MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
return tb_is_switch(dev) || tb_is_usb4_port_device(dev);
}
-static struct acpi_device *tb_acpi_find_port(struct acpi_device *adev,
- const struct tb_port *port)
+static struct acpi_device *tb_acpi_switch_find_companion(struct tb_switch *sw)
{
- struct acpi_device *port_adev;
-
- if (!adev)
- return NULL;
+ struct acpi_device *adev = NULL;
+ struct tb_switch *parent_sw;
/*
* Device routers exists under the downstream facing USB4 port
* of the parent router. Their _ADR is always 0.
*/
- list_for_each_entry(port_adev, &adev->children, node) {
- if (acpi_device_adr(port_adev) == port->port)
- return port_adev;
- }
-
- return NULL;
-}
-
-static struct acpi_device *tb_acpi_switch_find_companion(struct tb_switch *sw)
-{
- struct acpi_device *adev = NULL;
- struct tb_switch *parent_sw;
-
parent_sw = tb_switch_parent(sw);
if (parent_sw) {
struct tb_port *port = tb_port_at(tb_route(sw), parent_sw);
struct acpi_device *port_adev;
- port_adev = tb_acpi_find_port(ACPI_COMPANION(&parent_sw->dev), port);
+ port_adev = acpi_find_child_by_adr(ACPI_COMPANION(&parent_sw->dev),
+ port->port);
if (port_adev)
adev = acpi_find_child_device(port_adev, 0, false);
} else {
if (tb_is_switch(dev))
return tb_acpi_switch_find_companion(tb_to_switch(dev));
else if (tb_is_usb4_port_device(dev))
- return tb_acpi_find_port(ACPI_COMPANION(dev->parent),
- tb_to_usb4_port_device(dev)->port);
+ return acpi_find_child_by_adr(ACPI_COMPANION(dev->parent),
+ tb_to_usb4_port_device(dev)->port->port);
return NULL;
}
config SERIAL_BCM63XX
tristate "Broadcom BCM63xx/BCM33xx UART support"
select SERIAL_CORE
- depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
- default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
+ depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
help
This enables the driver for the onchip UART core found on
the following chipsets:
static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
struct ufshcd_lrb *lrbp, int max_timeout)
{
- int err = 0;
- unsigned long time_left;
+ unsigned long time_left = msecs_to_jiffies(max_timeout);
unsigned long flags;
+ bool pending;
+ int err;
+retry:
time_left = wait_for_completion_timeout(hba->dev_cmd.complete,
- msecs_to_jiffies(max_timeout));
+ time_left);
- spin_lock_irqsave(hba->host->host_lock, flags);
- hba->dev_cmd.complete = NULL;
if (likely(time_left)) {
+ /*
+ * The completion handler called complete() and the caller of
+ * this function still owns the @lrbp tag so the code below does
+ * not trigger any race conditions.
+ */
+ hba->dev_cmd.complete = NULL;
err = ufshcd_get_tr_ocs(lrbp);
if (!err)
err = ufshcd_dev_cmd_completion(hba, lrbp);
- }
- spin_unlock_irqrestore(hba->host->host_lock, flags);
-
- if (!time_left) {
+ } else {
err = -ETIMEDOUT;
dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n",
__func__, lrbp->task_tag);
- if (!ufshcd_clear_cmds(hba, 1U << lrbp->task_tag))
+ if (ufshcd_clear_cmds(hba, 1U << lrbp->task_tag) == 0) {
/* successfully cleared the command, retry if needed */
err = -EAGAIN;
- /*
- * in case of an error, after clearing the doorbell,
- * we also need to clear the outstanding_request
- * field in hba
- */
- spin_lock_irqsave(&hba->outstanding_lock, flags);
- __clear_bit(lrbp->task_tag, &hba->outstanding_reqs);
- spin_unlock_irqrestore(&hba->outstanding_lock, flags);
+ /*
+ * Since clearing the command succeeded we also need to
+ * clear the task tag bit from the outstanding_reqs
+ * variable.
+ */
+ spin_lock_irqsave(&hba->outstanding_lock, flags);
+ pending = test_bit(lrbp->task_tag,
+ &hba->outstanding_reqs);
+ if (pending) {
+ hba->dev_cmd.complete = NULL;
+ __clear_bit(lrbp->task_tag,
+ &hba->outstanding_reqs);
+ }
+ spin_unlock_irqrestore(&hba->outstanding_lock, flags);
+
+ if (!pending) {
+ /*
+ * The completion handler ran while we tried to
+ * clear the command.
+ */
+ time_left = 1;
+ goto retry;
+ }
+ } else {
+ dev_err(hba->dev, "%s: failed to clear tag %d\n",
+ __func__, lrbp->task_tag);
+ }
}
return err;
return ret;
}
+static bool phandle_exists(const struct device_node *np,
+ const char *phandle_name, int index)
+{
+ struct device_node *parse_np = of_parse_phandle(np, phandle_name, index);
+
+ if (parse_np)
+ of_node_put(parse_np);
+
+ return parse_np != NULL;
+}
+
#define MAX_PROP_SIZE 32
static int ufshcd_populate_vreg(struct device *dev, const char *name,
- struct ufs_vreg **out_vreg)
+ struct ufs_vreg **out_vreg)
{
char prop_name[MAX_PROP_SIZE];
struct ufs_vreg *vreg = NULL;
}
snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
- if (!of_parse_phandle(np, prop_name, 0)) {
+ if (!phandle_exists(np, prop_name, 0)) {
dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
__func__, prop_name);
goto out;
*/
#define USB_ACPI_LOCATION_VALID (1 << 31)
-static struct acpi_device *usb_acpi_find_port(struct acpi_device *parent,
- int raw)
-{
- struct acpi_device *adev;
-
- if (!parent)
- return NULL;
-
- list_for_each_entry(adev, &parent->children, node) {
- if (acpi_device_adr(adev) == raw)
- return adev;
- }
-
- return acpi_find_child_device(parent, raw, false);
-}
-
static struct acpi_device *
usb_acpi_get_companion_for_port(struct usb_port *port_dev)
{
port1 = port_dev->portnum;
}
- return usb_acpi_find_port(adev, port1);
+ return acpi_find_child_by_adr(adev, port1);
}
static struct acpi_device *
BUG_ON(irq == -1);
if (IS_ENABLED(CONFIG_SMP) && force_affinity) {
- cpumask_copy(irq_get_affinity_mask(irq), cpumask_of(cpu));
- cpumask_copy(irq_get_effective_affinity_mask(irq),
- cpumask_of(cpu));
+ struct irq_data *data = irq_get_irq_data(irq);
+
+ irq_data_update_affinity(data, cpumask_of(cpu));
+ irq_data_update_effective_affinity(data, cpumask_of(cpu));
}
xen_evtchn_port_bind_to_cpu(evtchn, cpu, info->cpu);
* chown_ok - verify permissions to chown inode
* @mnt_userns: user namespace of the mount @inode was found from
* @inode: inode to check permissions on
- * @uid: uid to chown @inode to
+ * @ia_vfsuid: uid to chown @inode to
*
* If the inode has been found through an idmapped mount the user namespace of
* the vfsmount must be passed through @mnt_userns. This function will then
* performed on the raw inode simply passs init_user_ns.
*/
static bool chown_ok(struct user_namespace *mnt_userns,
- const struct inode *inode,
- kuid_t uid)
+ const struct inode *inode, vfsuid_t ia_vfsuid)
{
- kuid_t kuid = i_uid_into_mnt(mnt_userns, inode);
- if (uid_eq(current_fsuid(), kuid) && uid_eq(uid, inode->i_uid))
+ vfsuid_t vfsuid = i_uid_into_vfsuid(mnt_userns, inode);
+ if (vfsuid_eq_kuid(vfsuid, current_fsuid()) &&
+ vfsuid_eq(ia_vfsuid, vfsuid))
return true;
if (capable_wrt_inode_uidgid(mnt_userns, inode, CAP_CHOWN))
return true;
- if (uid_eq(kuid, INVALID_UID) &&
+ if (!vfsuid_valid(vfsuid) &&
ns_capable(inode->i_sb->s_user_ns, CAP_CHOWN))
return true;
return false;
* chgrp_ok - verify permissions to chgrp inode
* @mnt_userns: user namespace of the mount @inode was found from
* @inode: inode to check permissions on
- * @gid: gid to chown @inode to
+ * @ia_vfsgid: gid to chown @inode to
*
* If the inode has been found through an idmapped mount the user namespace of
* the vfsmount must be passed through @mnt_userns. This function will then
* performed on the raw inode simply passs init_user_ns.
*/
static bool chgrp_ok(struct user_namespace *mnt_userns,
- const struct inode *inode, kgid_t gid)
+ const struct inode *inode, vfsgid_t ia_vfsgid)
{
- kgid_t kgid = i_gid_into_mnt(mnt_userns, inode);
- if (uid_eq(current_fsuid(), i_uid_into_mnt(mnt_userns, inode))) {
- kgid_t mapped_gid;
-
- if (gid_eq(gid, inode->i_gid))
+ vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
+ vfsuid_t vfsuid = i_uid_into_vfsuid(mnt_userns, inode);
+ if (vfsuid_eq_kuid(vfsuid, current_fsuid())) {
+ if (vfsgid_eq(ia_vfsgid, vfsgid))
return true;
- mapped_gid = mapped_kgid_fs(mnt_userns, i_user_ns(inode), gid);
- if (in_group_p(mapped_gid))
+ if (vfsgid_in_group_p(ia_vfsgid))
return true;
}
if (capable_wrt_inode_uidgid(mnt_userns, inode, CAP_CHOWN))
return true;
- if (gid_eq(kgid, INVALID_GID) &&
+ if (!vfsgid_valid(vfsgid) &&
ns_capable(inode->i_sb->s_user_ns, CAP_CHOWN))
return true;
return false;
goto kill_priv;
/* Make sure a caller can chown. */
- if ((ia_valid & ATTR_UID) && !chown_ok(mnt_userns, inode, attr->ia_uid))
+ if ((ia_valid & ATTR_UID) &&
+ !chown_ok(mnt_userns, inode, attr->ia_vfsuid))
return -EPERM;
/* Make sure caller can chgrp. */
- if ((ia_valid & ATTR_GID) && !chgrp_ok(mnt_userns, inode, attr->ia_gid))
+ if ((ia_valid & ATTR_GID) &&
+ !chgrp_ok(mnt_userns, inode, attr->ia_vfsgid))
return -EPERM;
/* Make sure a caller can chmod. */
if (ia_valid & ATTR_MODE) {
- kgid_t mapped_gid;
+ vfsgid_t vfsgid;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EPERM;
if (ia_valid & ATTR_GID)
- mapped_gid = mapped_kgid_fs(mnt_userns,
- i_user_ns(inode), attr->ia_gid);
+ vfsgid = attr->ia_vfsgid;
else
- mapped_gid = i_gid_into_mnt(mnt_userns, inode);
+ vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
/* Also check the setgid bit! */
- if (!in_group_p(mapped_gid) &&
+ if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
attr->ia_mode &= ~S_ISGID;
}
* setattr_copy must be called with i_mutex held.
*
* setattr_copy updates the inode's metadata with that specified
- * in attr on idmapped mounts. If file ownership is changed setattr_copy
- * doesn't map ia_uid and ia_gid. It will asssume the caller has already
- * provided the intended values. Necessary permission checks to determine
+ * in attr on idmapped mounts. Necessary permission checks to determine
* whether or not the S_ISGID property needs to be removed are performed with
* the correct idmapped mount permission helpers.
* Noticeably missing is inode size update, which is more complex
{
unsigned int ia_valid = attr->ia_valid;
- if (ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
+ i_uid_update(mnt_userns, attr, inode);
+ i_gid_update(mnt_userns, attr, inode);
if (ia_valid & ATTR_ATIME)
inode->i_atime = attr->ia_atime;
if (ia_valid & ATTR_MTIME)
inode->i_ctime = attr->ia_ctime;
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
- kgid_t kgid = i_gid_into_mnt(mnt_userns, inode);
- if (!in_group_p(kgid) &&
+ vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
+ if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
* retry. Because breaking a delegation may take a long time, the
* caller should drop the i_mutex before doing so.
*
- * If file ownership is changed notify_change() doesn't map ia_uid and
- * ia_gid. It will asssume the caller has already provided the intended values.
- *
* Alternatively, a caller may pass NULL for delegated_inode. This may
* be appropriate for callers that expect the underlying filesystem not
* to be NFS exported. Also, passing NULL is fine for callers holding
* namespace of the superblock.
*/
if (ia_valid & ATTR_UID &&
- !kuid_has_mapping(inode->i_sb->s_user_ns, attr->ia_uid))
+ !vfsuid_has_fsmapping(mnt_userns, inode->i_sb->s_user_ns,
+ attr->ia_vfsuid))
return -EOVERFLOW;
if (ia_valid & ATTR_GID &&
- !kgid_has_mapping(inode->i_sb->s_user_ns, attr->ia_gid))
+ !vfsgid_has_fsmapping(mnt_userns, inode->i_sb->s_user_ns,
+ attr->ia_vfsgid))
return -EOVERFLOW;
/* Don't allow modifications of files with invalid uids or
* gids unless those uids & gids are being made valid.
*/
if (!(ia_valid & ATTR_UID) &&
- !uid_valid(i_uid_into_mnt(mnt_userns, inode)))
+ !vfsuid_valid(i_uid_into_vfsuid(mnt_userns, inode)))
return -EOVERFLOW;
if (!(ia_valid & ATTR_GID) &&
- !gid_valid(i_gid_into_mnt(mnt_userns, inode)))
+ !vfsgid_valid(i_gid_into_vfsgid(mnt_userns, inode)))
return -EOVERFLOW;
- error = security_inode_setattr(dentry, attr);
+ error = security_inode_setattr(mnt_userns, dentry, attr);
if (error)
return error;
error = try_break_deleg(inode, delegated_inode);
A general purpose distributed lock manager for kernel or userspace
applications.
+config DLM_DEPRECATED_API
+ bool "DLM deprecated API"
+ depends on DLM
+ help
+ Enables deprecated DLM timeout features that will be removed in
+ later Linux kernel releases.
+
+ If you are unsure, say N.
+
config DLM_DEBUG
bool "DLM debugging"
depends on DLM
member.o \
memory.o \
midcomms.o \
- netlink.o \
lowcomms.o \
plock.o \
rcom.o \
requestqueue.o \
user.o \
util.o
+dlm-$(CONFIG_DLM_DEPRECATED_API) += netlink.o
dlm-$(CONFIG_DLM_DEBUG) += debug_fs.o
if (callbacks[i].flags & DLM_CB_SKIP) {
continue;
} else if (callbacks[i].flags & DLM_CB_BAST) {
- bastfn(lkb->lkb_astparam, callbacks[i].mode);
trace_dlm_bast(ls, lkb, callbacks[i].mode);
+ bastfn(lkb->lkb_astparam, callbacks[i].mode);
} else if (callbacks[i].flags & DLM_CB_CAST) {
lkb->lkb_lksb->sb_status = callbacks[i].sb_status;
lkb->lkb_lksb->sb_flags = callbacks[i].sb_flags;
+ trace_dlm_ast(ls, lkb);
castfn(lkb->lkb_astparam);
- trace_dlm_ast(ls, lkb, lkb->lkb_lksb);
}
}
unsigned int cl_log_info;
unsigned int cl_protocol;
unsigned int cl_mark;
+#ifdef CONFIG_DLM_DEPRECATED_API
unsigned int cl_timewarn_cs;
- unsigned int cl_waitwarn_us;
+#endif
unsigned int cl_new_rsb_count;
unsigned int cl_recover_callbacks;
char cl_cluster_name[DLM_LOCKSPACE_LEN];
CLUSTER_ATTR_LOG_INFO,
CLUSTER_ATTR_PROTOCOL,
CLUSTER_ATTR_MARK,
+#ifdef CONFIG_DLM_DEPRECATED_API
CLUSTER_ATTR_TIMEWARN_CS,
- CLUSTER_ATTR_WAITWARN_US,
+#endif
CLUSTER_ATTR_NEW_RSB_COUNT,
CLUSTER_ATTR_RECOVER_CALLBACKS,
CLUSTER_ATTR_CLUSTER_NAME,
CLUSTER_ATTR(log_info, NULL);
CLUSTER_ATTR(protocol, dlm_check_protocol_and_dlm_running);
CLUSTER_ATTR(mark, NULL);
+#ifdef CONFIG_DLM_DEPRECATED_API
CLUSTER_ATTR(timewarn_cs, dlm_check_zero);
-CLUSTER_ATTR(waitwarn_us, NULL);
+#endif
CLUSTER_ATTR(new_rsb_count, NULL);
CLUSTER_ATTR(recover_callbacks, NULL);
[CLUSTER_ATTR_LOG_INFO] = &cluster_attr_log_info,
[CLUSTER_ATTR_PROTOCOL] = &cluster_attr_protocol,
[CLUSTER_ATTR_MARK] = &cluster_attr_mark,
+#ifdef CONFIG_DLM_DEPRECATED_API
[CLUSTER_ATTR_TIMEWARN_CS] = &cluster_attr_timewarn_cs,
- [CLUSTER_ATTR_WAITWARN_US] = &cluster_attr_waitwarn_us,
+#endif
[CLUSTER_ATTR_NEW_RSB_COUNT] = &cluster_attr_new_rsb_count,
[CLUSTER_ATTR_RECOVER_CALLBACKS] = &cluster_attr_recover_callbacks,
[CLUSTER_ATTR_CLUSTER_NAME] = &cluster_attr_cluster_name,
cl->cl_log_debug = dlm_config.ci_log_debug;
cl->cl_log_info = dlm_config.ci_log_info;
cl->cl_protocol = dlm_config.ci_protocol;
+#ifdef CONFIG_DLM_DEPRECATED_API
cl->cl_timewarn_cs = dlm_config.ci_timewarn_cs;
- cl->cl_waitwarn_us = dlm_config.ci_waitwarn_us;
+#endif
cl->cl_new_rsb_count = dlm_config.ci_new_rsb_count;
cl->cl_recover_callbacks = dlm_config.ci_recover_callbacks;
memcpy(cl->cl_cluster_name, dlm_config.ci_cluster_name,
#define DEFAULT_LOG_INFO 1
#define DEFAULT_PROTOCOL DLM_PROTO_TCP
#define DEFAULT_MARK 0
+#ifdef CONFIG_DLM_DEPRECATED_API
#define DEFAULT_TIMEWARN_CS 500 /* 5 sec = 500 centiseconds */
-#define DEFAULT_WAITWARN_US 0
+#endif
#define DEFAULT_NEW_RSB_COUNT 128
#define DEFAULT_RECOVER_CALLBACKS 0
#define DEFAULT_CLUSTER_NAME ""
.ci_log_info = DEFAULT_LOG_INFO,
.ci_protocol = DEFAULT_PROTOCOL,
.ci_mark = DEFAULT_MARK,
+#ifdef CONFIG_DLM_DEPRECATED_API
.ci_timewarn_cs = DEFAULT_TIMEWARN_CS,
- .ci_waitwarn_us = DEFAULT_WAITWARN_US,
+#endif
.ci_new_rsb_count = DEFAULT_NEW_RSB_COUNT,
.ci_recover_callbacks = DEFAULT_RECOVER_CALLBACKS,
.ci_cluster_name = DEFAULT_CLUSTER_NAME
int ci_log_info;
int ci_protocol;
int ci_mark;
+#ifdef CONFIG_DLM_DEPRECATED_API
int ci_timewarn_cs;
- int ci_waitwarn_us;
+#endif
int ci_new_rsb_count;
int ci_recover_callbacks;
char ci_cluster_name[DLM_LOCKSPACE_LEN];
void (*bastfn) (void *astparam, int mode);
int mode;
struct dlm_lksb *lksb;
+#ifdef CONFIG_DLM_DEPRECATED_API
unsigned long timeout;
+#endif
};
#define DLM_IFL_OVERLAP_UNLOCK 0x00080000
#define DLM_IFL_OVERLAP_CANCEL 0x00100000
#define DLM_IFL_ENDOFLIFE 0x00200000
+#ifdef CONFIG_DLM_DEPRECATED_API
#define DLM_IFL_WATCH_TIMEWARN 0x00400000
#define DLM_IFL_TIMEOUT_CANCEL 0x00800000
+#endif
#define DLM_IFL_DEADLOCK_CANCEL 0x01000000
#define DLM_IFL_STUB_MS 0x02000000 /* magic number for m_flags */
+/* least significant 2 bytes are message changed, they are full transmitted
+ * but at receive side only the 2 bytes LSB will be set.
+ *
+ * Even wireshark dlm dissector does only evaluate the lower bytes and note
+ * that they may not be used on transceiver side, we assume the higher bytes
+ * are for internal use or reserved so long they are not parsed on receiver
+ * side.
+ */
#define DLM_IFL_USER 0x00000001
#define DLM_IFL_ORPHAN 0x00000002
struct list_head lkb_rsb_lookup; /* waiting for rsb lookup */
struct list_head lkb_wait_reply; /* waiting for remote reply */
struct list_head lkb_ownqueue; /* list of locks for a process */
- struct list_head lkb_time_list;
ktime_t lkb_timestamp;
- ktime_t lkb_wait_time;
+
+#ifdef CONFIG_DLM_DEPRECATED_API
+ struct list_head lkb_time_list;
unsigned long lkb_timeout_cs;
+#endif
struct mutex lkb_cb_mutex;
struct work_struct lkb_cb_work;
struct mutex ls_orphans_mutex;
struct list_head ls_orphans;
+#ifdef CONFIG_DLM_DEPRECATED_API
struct mutex ls_timeout_mutex;
struct list_head ls_timeout;
+#endif
spinlock_t ls_new_rsb_spin;
int ls_new_rsb_count;
wait_queue_head_t ls_uevent_wait; /* user part of join/leave */
int ls_uevent_result;
- struct completion ls_members_done;
- int ls_members_result;
+ struct completion ls_recovery_done;
+ int ls_recovery_result;
struct miscdevice ls_device;
#define LSFL_RCOM_READY 5
#define LSFL_RCOM_WAIT 6
#define LSFL_UEVENT_WAIT 7
+#ifdef CONFIG_DLM_DEPRECATED_API
#define LSFL_TIMEWARN 8
+#endif
#define LSFL_CB_DELAY 9
#define LSFL_NODIR 10
return test_bit(LSFL_NODIR, &ls->ls_flags);
}
+#ifdef CONFIG_DLM_DEPRECATED_API
int dlm_netlink_init(void);
void dlm_netlink_exit(void);
void dlm_timeout_warn(struct dlm_lkb *lkb);
+#else
+static inline int dlm_netlink_init(void) { return 0; }
+static inline void dlm_netlink_exit(void) { };
+static inline void dlm_timeout_warn(struct dlm_lkb *lkb) { };
+#endif
int dlm_plock_init(void);
void dlm_plock_exit(void);
DLM_ASSERT(lkb->lkb_lksb, dlm_print_lkb(lkb););
+#ifdef CONFIG_DLM_DEPRECATED_API
/* if the operation was a cancel, then return -DLM_ECANCEL, if a
timeout caused the cancel then return -ETIMEDOUT */
if (rv == -DLM_ECANCEL && (lkb->lkb_flags & DLM_IFL_TIMEOUT_CANCEL)) {
lkb->lkb_flags &= ~DLM_IFL_TIMEOUT_CANCEL;
rv = -ETIMEDOUT;
}
+#endif
if (rv == -DLM_ECANCEL && (lkb->lkb_flags & DLM_IFL_DEADLOCK_CANCEL)) {
lkb->lkb_flags &= ~DLM_IFL_DEADLOCK_CANCEL;
kref_init(&lkb->lkb_ref);
INIT_LIST_HEAD(&lkb->lkb_ownqueue);
INIT_LIST_HEAD(&lkb->lkb_rsb_lookup);
+#ifdef CONFIG_DLM_DEPRECATED_API
INIT_LIST_HEAD(&lkb->lkb_time_list);
+#endif
INIT_LIST_HEAD(&lkb->lkb_cb_list);
mutex_init(&lkb->lkb_cb_mutex);
INIT_WORK(&lkb->lkb_cb_work, dlm_callback_work);
kref_get(&lkb->lkb_ref);
}
+static void unhold_lkb_assert(struct kref *kref)
+{
+ struct dlm_lkb *lkb = container_of(kref, struct dlm_lkb, lkb_ref);
+
+ DLM_ASSERT(false, dlm_print_lkb(lkb););
+}
+
/* This is called when we need to remove a reference and are certain
it's not the last ref. e.g. del_lkb is always called between a
find_lkb/put_lkb and is always the inverse of a previous add_lkb.
static inline void unhold_lkb(struct dlm_lkb *lkb)
{
- int rv;
- rv = kref_put(&lkb->lkb_ref, kill_lkb);
- DLM_ASSERT(!rv, dlm_print_lkb(lkb););
+ kref_put(&lkb->lkb_ref, unhold_lkb_assert);
}
static void lkb_add_ordered(struct list_head *new, struct list_head *head,
return -1;
}
-static int nodeid_warned(int nodeid, int num_nodes, int *warned)
-{
- int i;
-
- for (i = 0; i < num_nodes; i++) {
- if (!warned[i]) {
- warned[i] = nodeid;
- return 0;
- }
- if (warned[i] == nodeid)
- return 1;
- }
- return 0;
-}
-
-void dlm_scan_waiters(struct dlm_ls *ls)
-{
- struct dlm_lkb *lkb;
- s64 us;
- s64 debug_maxus = 0;
- u32 debug_scanned = 0;
- u32 debug_expired = 0;
- int num_nodes = 0;
- int *warned = NULL;
-
- if (!dlm_config.ci_waitwarn_us)
- return;
-
- mutex_lock(&ls->ls_waiters_mutex);
-
- list_for_each_entry(lkb, &ls->ls_waiters, lkb_wait_reply) {
- if (!lkb->lkb_wait_time)
- continue;
-
- debug_scanned++;
-
- us = ktime_to_us(ktime_sub(ktime_get(), lkb->lkb_wait_time));
-
- if (us < dlm_config.ci_waitwarn_us)
- continue;
-
- lkb->lkb_wait_time = 0;
-
- debug_expired++;
- if (us > debug_maxus)
- debug_maxus = us;
-
- if (!num_nodes) {
- num_nodes = ls->ls_num_nodes;
- warned = kcalloc(num_nodes, sizeof(int), GFP_KERNEL);
- }
- if (!warned)
- continue;
- if (nodeid_warned(lkb->lkb_wait_nodeid, num_nodes, warned))
- continue;
-
- log_error(ls, "waitwarn %x %lld %d us check connection to "
- "node %d", lkb->lkb_id, (long long)us,
- dlm_config.ci_waitwarn_us, lkb->lkb_wait_nodeid);
- }
- mutex_unlock(&ls->ls_waiters_mutex);
- kfree(warned);
-
- if (debug_expired)
- log_debug(ls, "scan_waiters %u warn %u over %d us max %lld us",
- debug_scanned, debug_expired,
- dlm_config.ci_waitwarn_us, (long long)debug_maxus);
-}
-
/* add/remove lkb from global waiters list of lkb's waiting for
a reply from a remote node */
lkb->lkb_wait_count++;
lkb->lkb_wait_type = mstype;
- lkb->lkb_wait_time = ktime_get();
lkb->lkb_wait_nodeid = to_nodeid; /* for debugging */
hold_lkb(lkb);
list_add(&lkb->lkb_wait_reply, &ls->ls_waiters);
}
}
+#ifdef CONFIG_DLM_DEPRECATED_API
static void add_timeout(struct dlm_lkb *lkb)
{
struct dlm_ls *ls = lkb->lkb_resource->res_ls;
list_for_each_entry(lkb, &ls->ls_timeout, lkb_time_list)
lkb->lkb_timestamp = ktime_add_us(lkb->lkb_timestamp, adj_us);
mutex_unlock(&ls->ls_timeout_mutex);
-
- if (!dlm_config.ci_waitwarn_us)
- return;
-
- mutex_lock(&ls->ls_waiters_mutex);
- list_for_each_entry(lkb, &ls->ls_waiters, lkb_wait_reply) {
- if (ktime_to_us(lkb->lkb_wait_time))
- lkb->lkb_wait_time = ktime_get();
- }
- mutex_unlock(&ls->ls_waiters_mutex);
}
+#else
+static void add_timeout(struct dlm_lkb *lkb) { }
+static void del_timeout(struct dlm_lkb *lkb) { }
+#endif
/* lkb is master or local copy */
}
}
+#ifdef CONFIG_DLM_DEPRECATED_API
static int set_lock_args(int mode, struct dlm_lksb *lksb, uint32_t flags,
int namelen, unsigned long timeout_cs,
void (*ast) (void *astparam),
void *astparam,
void (*bast) (void *astparam, int mode),
struct dlm_args *args)
+#else
+static int set_lock_args(int mode, struct dlm_lksb *lksb, uint32_t flags,
+ int namelen, void (*ast)(void *astparam),
+ void *astparam,
+ void (*bast)(void *astparam, int mode),
+ struct dlm_args *args)
+#endif
{
int rv = -EINVAL;
args->astfn = ast;
args->astparam = astparam;
args->bastfn = bast;
+#ifdef CONFIG_DLM_DEPRECATED_API
args->timeout = timeout_cs;
+#endif
args->mode = mode;
args->lksb = lksb;
rv = 0;
lkb->lkb_lksb = args->lksb;
lkb->lkb_lvbptr = args->lksb->sb_lvbptr;
lkb->lkb_ownpid = (int) current->pid;
+#ifdef CONFIG_DLM_DEPRECATED_API
lkb->lkb_timeout_cs = args->timeout;
+#endif
rv = 0;
out:
if (rv)
if (error)
goto out;
- trace_dlm_lock_start(ls, lkb, mode, flags);
+ trace_dlm_lock_start(ls, lkb, name, namelen, mode, flags);
+#ifdef CONFIG_DLM_DEPRECATED_API
error = set_lock_args(mode, lksb, flags, namelen, 0, ast,
astarg, bast, &args);
+#else
+ error = set_lock_args(mode, lksb, flags, namelen, ast, astarg, bast,
+ &args);
+#endif
if (error)
goto out_put;
if (error == -EINPROGRESS)
error = 0;
out_put:
- trace_dlm_lock_end(ls, lkb, mode, flags, error);
+ trace_dlm_lock_end(ls, lkb, name, namelen, mode, flags, error);
if (convert || error)
__put_lkb(ls, lkb);
return 0;
}
+#ifdef CONFIG_DLM_DEPRECATED_API
int dlm_user_request(struct dlm_ls *ls, struct dlm_user_args *ua,
int mode, uint32_t flags, void *name, unsigned int namelen,
unsigned long timeout_cs)
+#else
+int dlm_user_request(struct dlm_ls *ls, struct dlm_user_args *ua,
+ int mode, uint32_t flags, void *name, unsigned int namelen)
+#endif
{
struct dlm_lkb *lkb;
struct dlm_args args;
goto out;
}
}
+#ifdef CONFIG_DLM_DEPRECATED_API
error = set_lock_args(mode, &ua->lksb, flags, namelen, timeout_cs,
fake_astfn, ua, fake_bastfn, &args);
+#else
+ error = set_lock_args(mode, &ua->lksb, flags, namelen, fake_astfn, ua,
+ fake_bastfn, &args);
+#endif
if (error) {
kfree(ua->lksb.sb_lvbptr);
ua->lksb.sb_lvbptr = NULL;
return error;
}
+#ifdef CONFIG_DLM_DEPRECATED_API
int dlm_user_convert(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
int mode, uint32_t flags, uint32_t lkid, char *lvb_in,
unsigned long timeout_cs)
+#else
+int dlm_user_convert(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
+ int mode, uint32_t flags, uint32_t lkid, char *lvb_in)
+#endif
{
struct dlm_lkb *lkb;
struct dlm_args args;
ua->bastaddr = ua_tmp->bastaddr;
ua->user_lksb = ua_tmp->user_lksb;
+#ifdef CONFIG_DLM_DEPRECATED_API
error = set_lock_args(mode, &ua->lksb, flags, 0, timeout_cs,
fake_astfn, ua, fake_bastfn, &args);
+#else
+ error = set_lock_args(mode, &ua->lksb, flags, 0, fake_astfn, ua,
+ fake_bastfn, &args);
+#endif
if (error)
goto out_put;
int dlm_user_adopt_orphan(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
int mode, uint32_t flags, void *name, unsigned int namelen,
- unsigned long timeout_cs, uint32_t *lkid)
+ uint32_t *lkid)
{
struct dlm_lkb *lkb = NULL, *iter;
struct dlm_user_args *ua;
void dlm_scan_rsbs(struct dlm_ls *ls);
int dlm_lock_recovery_try(struct dlm_ls *ls);
void dlm_unlock_recovery(struct dlm_ls *ls);
-void dlm_scan_waiters(struct dlm_ls *ls);
+
+#ifdef CONFIG_DLM_DEPRECATED_API
void dlm_scan_timeout(struct dlm_ls *ls);
void dlm_adjust_timeouts(struct dlm_ls *ls);
+#else
+static inline void dlm_scan_timeout(struct dlm_ls *ls) { }
+static inline void dlm_adjust_timeouts(struct dlm_ls *ls) { }
+#endif
+
int dlm_master_lookup(struct dlm_ls *ls, int nodeid, char *name, int len,
unsigned int flags, int *r_nodeid, int *result);
int dlm_recover_master_copy(struct dlm_ls *ls, struct dlm_rcom *rc);
int dlm_recover_process_copy(struct dlm_ls *ls, struct dlm_rcom *rc);
+#ifdef CONFIG_DLM_DEPRECATED_API
int dlm_user_request(struct dlm_ls *ls, struct dlm_user_args *ua, int mode,
uint32_t flags, void *name, unsigned int namelen,
unsigned long timeout_cs);
int dlm_user_convert(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
int mode, uint32_t flags, uint32_t lkid, char *lvb_in,
unsigned long timeout_cs);
+#else
+int dlm_user_request(struct dlm_ls *ls, struct dlm_user_args *ua, int mode,
+ uint32_t flags, void *name, unsigned int namelen);
+int dlm_user_convert(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
+ int mode, uint32_t flags, uint32_t lkid, char *lvb_in);
+#endif
int dlm_user_adopt_orphan(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
int mode, uint32_t flags, void *name, unsigned int namelen,
- unsigned long timeout_cs, uint32_t *lkid);
+ uint32_t *lkid);
int dlm_user_unlock(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
uint32_t flags, uint32_t lkid, char *lvb_in);
int dlm_user_cancel(struct dlm_ls *ls, struct dlm_user_args *ua_tmp,
ls->ls_scan_time = jiffies;
dlm_scan_rsbs(ls);
dlm_scan_timeout(ls);
- dlm_scan_waiters(ls);
dlm_unlock_recovery(ls);
} else {
ls->ls_scan_time += HZ;
ls->ls_ops_arg = ops_arg;
}
- if (flags & DLM_LSFL_TIMEWARN)
+#ifdef CONFIG_DLM_DEPRECATED_API
+ if (flags & DLM_LSFL_TIMEWARN) {
+ pr_warn_once("===============================================================\n"
+ "WARNING: the dlm DLM_LSFL_TIMEWARN flag is being deprecated and\n"
+ " will be removed in v6.2!\n"
+ " Inclusive DLM_LSFL_TIMEWARN define in UAPI header!\n"
+ "===============================================================\n");
+
set_bit(LSFL_TIMEWARN, &ls->ls_flags);
+ }
/* ls_exflags are forced to match among nodes, and we don't
- need to require all nodes to have some flags set */
+ * need to require all nodes to have some flags set
+ */
ls->ls_exflags = (flags & ~(DLM_LSFL_TIMEWARN | DLM_LSFL_FS |
DLM_LSFL_NEWEXCL));
+#else
+ /* ls_exflags are forced to match among nodes, and we don't
+ * need to require all nodes to have some flags set
+ */
+ ls->ls_exflags = (flags & ~(DLM_LSFL_FS | DLM_LSFL_NEWEXCL));
+#endif
size = READ_ONCE(dlm_config.ci_rsbtbl_size);
ls->ls_rsbtbl_size = size;
mutex_init(&ls->ls_waiters_mutex);
INIT_LIST_HEAD(&ls->ls_orphans);
mutex_init(&ls->ls_orphans_mutex);
+#ifdef CONFIG_DLM_DEPRECATED_API
INIT_LIST_HEAD(&ls->ls_timeout);
mutex_init(&ls->ls_timeout_mutex);
+#endif
INIT_LIST_HEAD(&ls->ls_new_rsb);
spin_lock_init(&ls->ls_new_rsb_spin);
init_waitqueue_head(&ls->ls_uevent_wait);
ls->ls_uevent_result = 0;
- init_completion(&ls->ls_members_done);
- ls->ls_members_result = -1;
+ init_completion(&ls->ls_recovery_done);
+ ls->ls_recovery_result = -1;
mutex_init(&ls->ls_cb_mutex);
INIT_LIST_HEAD(&ls->ls_cb_delay);
if (error)
goto out_recoverd;
- wait_for_completion(&ls->ls_members_done);
- error = ls->ls_members_result;
+ /* wait until recovery is successful or failed */
+ wait_for_completion(&ls->ls_recovery_done);
+ error = ls->ls_recovery_result;
if (error)
goto out_members;
return;
if (!test_and_set_bit(CF_CONNECTED, &con->flags)) {
- log_print("successful connected to node %d", con->nodeid);
+ log_print("connected to node %d", con->nodeid);
queue_work(send_workqueue, &con->swork);
return;
}
return ret;
if (!test_and_set_bit(CF_CONNECTED, &con->flags))
- log_print("successful connected to node %d", con->nodeid);
+ log_print("connected to node %d", con->nodeid);
return 0;
}
int i, error, neg = 0, low = -1;
/* previously removed members that we've not finished removing need to
- count as a negative change so the "neg" recovery steps will happen */
+ * count as a negative change so the "neg" recovery steps will happen
+ *
+ * This functionality must report all member changes to lsops or
+ * midcomms layer and must never return before.
+ */
list_for_each_entry(memb, &ls->ls_nodes_gone, list) {
log_rinfo(ls, "prev removed member %d", memb->nodeid);
*neg_out = neg;
error = ping_members(ls);
- /* error -EINTR means that a new recovery action is triggered.
- * We ignore this recovery action and let run the new one which might
- * have new member configuration.
- */
- if (error == -EINTR)
- error = 0;
-
- /* new_lockspace() may be waiting to know if the config
- * is good or bad
- */
- ls->ls_members_result = error;
- complete(&ls->ls_members_done);
-
log_rinfo(ls, "dlm_recover_members %d nodes", ls->ls_num_nodes);
return error;
}
if (!ls->ls_recover_begin)
ls->ls_recover_begin = jiffies;
- dlm_lsop_recover_prep(ls);
+ /* call recover_prep ops only once and not multiple times
+ * for each possible dlm_ls_stop() when recovery is already
+ * stopped.
+ *
+ * If we successful was able to clear LSFL_RUNNING bit and
+ * it was set we know it is the first dlm_ls_stop() call.
+ */
+ if (new)
+ dlm_lsop_recover_prep(ls);
+
return 0;
}
struct plock_op {
struct list_head list;
int done;
+ /* if lock op got interrupted while waiting dlm_controld reply */
+ bool sigint;
struct dlm_plock_info info;
/* if set indicates async handling */
struct plock_async_data *data;
abandoned waiter. So, we have to insert the unlock-close when the
lock call is interrupted. */
-static void do_unlock_close(struct dlm_ls *ls, u64 number,
- struct file *file, struct file_lock *fl)
+static void do_unlock_close(const struct dlm_plock_info *info)
{
struct plock_op *op;
return;
op->info.optype = DLM_PLOCK_OP_UNLOCK;
- op->info.pid = fl->fl_pid;
- op->info.fsid = ls->ls_global_id;
- op->info.number = number;
+ op->info.pid = info->pid;
+ op->info.fsid = info->fsid;
+ op->info.number = info->number;
op->info.start = 0;
op->info.end = OFFSET_MAX;
- if (fl->fl_lmops && fl->fl_lmops->lm_grant)
- op->info.owner = (__u64) fl->fl_pid;
- else
- op->info.owner = (__u64)(long) fl->fl_owner;
+ op->info.owner = info->owner;
op->info.flags |= DLM_PLOCK_FL_CLOSE;
send_op(op);
rv = wait_event_interruptible(recv_wq, (op->done != 0));
if (rv == -ERESTARTSYS) {
spin_lock(&ops_lock);
- list_del(&op->list);
+ /* recheck under ops_lock if we got a done != 0,
+ * if so this interrupt case should be ignored
+ */
+ if (op->done != 0) {
+ spin_unlock(&ops_lock);
+ goto do_lock_wait;
+ }
+
+ op->sigint = true;
spin_unlock(&ops_lock);
- log_print("%s: wait interrupted %x %llx, op removed",
+ log_debug(ls, "%s: wait interrupted %x %llx pid %d",
__func__, ls->ls_global_id,
- (unsigned long long)number);
- dlm_release_plock_op(op);
- do_unlock_close(ls, number, file, fl);
+ (unsigned long long)number, op->info.pid);
goto out;
}
+do_lock_wait:
+
WARN_ON(!list_empty(&op->list));
rv = op->info.rv;
spin_lock(&ops_lock);
if (!list_empty(&send_list)) {
- op = list_entry(send_list.next, struct plock_op, list);
+ op = list_first_entry(&send_list, struct plock_op, list);
if (op->info.flags & DLM_PLOCK_FL_CLOSE)
list_del(&op->list);
else
if (iter->info.fsid == info.fsid &&
iter->info.number == info.number &&
iter->info.owner == info.owner) {
+ if (iter->sigint) {
+ list_del(&iter->list);
+ spin_unlock(&ops_lock);
+
+ pr_debug("%s: sigint cleanup %x %llx pid %d",
+ __func__, iter->info.fsid,
+ (unsigned long long)iter->info.number,
+ iter->info.pid);
+ do_unlock_close(&iter->info);
+ memcpy(&iter->info, &info, sizeof(info));
+ dlm_release_plock_op(iter);
+ return count;
+ }
list_del_init(&iter->list);
memcpy(&iter->info, &info, sizeof(info));
if (iter->data)
else
wake_up(&recv_wq);
} else
- log_print("%s: no op %x %llx - may got interrupted?", __func__,
+ log_print("%s: no op %x %llx", __func__,
info.fsid, (unsigned long long)info.number);
return count;
}
/*
* Add or remove nodes from the lockspace's ls_nodes list.
+ *
+ * Due to the fact that we must report all membership changes to lsops
+ * or midcomms layer, it is not permitted to abort ls_recover() until
+ * this is done.
*/
error = dlm_recover_members(ls, rv, &neg);
jiffies_to_msecs(jiffies - start));
mutex_unlock(&ls->ls_recoverd_active);
- dlm_lsop_recover_done(ls);
return 0;
fail:
dlm_release_root_list(ls);
- log_rinfo(ls, "dlm_recover %llu error %d",
- (unsigned long long)rv->seq, error);
mutex_unlock(&ls->ls_recoverd_active);
+
return error;
}
static void do_ls_recovery(struct dlm_ls *ls)
{
struct dlm_recover *rv = NULL;
+ int error;
spin_lock(&ls->ls_recover_lock);
rv = ls->ls_recover_args;
spin_unlock(&ls->ls_recover_lock);
if (rv) {
- ls_recover(ls, rv);
+ error = ls_recover(ls, rv);
+ switch (error) {
+ case 0:
+ ls->ls_recovery_result = 0;
+ complete(&ls->ls_recovery_done);
+
+ dlm_lsop_recover_done(ls);
+ break;
+ case -EINTR:
+ /* if recovery was interrupted -EINTR we wait for the next
+ * ls_recover() iteration until it hopefully succeeds.
+ */
+ log_rinfo(ls, "%s %llu interrupted and should be queued to run again",
+ __func__, (unsigned long long)rv->seq);
+ break;
+ default:
+ log_rinfo(ls, "%s %llu error %d", __func__,
+ (unsigned long long)rv->seq, error);
+
+ /* let new_lockspace() get aware of critical error */
+ ls->ls_recovery_result = error;
+ complete(&ls->ls_recovery_done);
+ break;
+ }
+
kfree(rv->nodes);
kfree(rv);
}
goto out;
}
+#ifdef CONFIG_DLM_DEPRECATED_API
+ if (params->timeout)
+ pr_warn_once("========================================================\n"
+ "WARNING: the lkb timeout feature is being deprecated and\n"
+ " will be removed in v6.2!\n"
+ "========================================================\n");
+#endif
+
ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);
if (!ua)
goto out;
ua->xid = params->xid;
if (params->flags & DLM_LKF_CONVERT) {
+#ifdef CONFIG_DLM_DEPRECATED_API
error = dlm_user_convert(ls, ua,
params->mode, params->flags,
params->lkid, params->lvb,
(unsigned long) params->timeout);
+#else
+ error = dlm_user_convert(ls, ua,
+ params->mode, params->flags,
+ params->lkid, params->lvb);
+#endif
} else if (params->flags & DLM_LKF_ORPHAN) {
error = dlm_user_adopt_orphan(ls, ua,
params->mode, params->flags,
params->name, params->namelen,
- (unsigned long) params->timeout,
&lkid);
if (!error)
error = lkid;
} else {
+#ifdef CONFIG_DLM_DEPRECATED_API
error = dlm_user_request(ls, ua,
params->mode, params->flags,
params->name, params->namelen,
(unsigned long) params->timeout);
+#else
+ error = dlm_user_request(ls, ua,
+ params->mode, params->flags,
+ params->name, params->namelen);
+#endif
if (!error)
error = ua->lksb.sb_lkid;
}
/* indicate the algorithm will be used for decompression */
unsigned int alg;
- bool inplace_io, partial_decoding;
+ bool inplace_io, partial_decoding, fillgaps;
};
struct z_erofs_decompressor {
return iomap_bmap(mapping, block, &erofs_iomap_ops);
}
-static int erofs_prepare_dio(struct kiocb *iocb, struct iov_iter *to)
+static ssize_t erofs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct inode *inode = file_inode(iocb->ki_filp);
- loff_t align = iocb->ki_pos | iov_iter_count(to) |
- iov_iter_alignment(to);
- struct block_device *bdev = inode->i_sb->s_bdev;
- unsigned int blksize_mask;
-
- if (bdev)
- blksize_mask = (1 << ilog2(bdev_logical_block_size(bdev))) - 1;
- else
- blksize_mask = (1 << inode->i_blkbits) - 1;
- if (align & blksize_mask)
- return -EINVAL;
- return 0;
-}
-
-static ssize_t erofs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
-{
/* no need taking (shared) inode lock since it's a ro filesystem */
if (!iov_iter_count(to))
return 0;
#ifdef CONFIG_FS_DAX
- if (IS_DAX(iocb->ki_filp->f_mapping->host))
+ if (IS_DAX(inode))
return dax_iomap_rw(iocb, to, &erofs_iomap_ops);
#endif
if (iocb->ki_flags & IOCB_DIRECT) {
- int err = erofs_prepare_dio(iocb, to);
+ struct block_device *bdev = inode->i_sb->s_bdev;
+ unsigned int blksize_mask;
+
+ if (bdev)
+ blksize_mask = bdev_logical_block_size(bdev) - 1;
+ else
+ blksize_mask = (1 << inode->i_blkbits) - 1;
+
+ if ((iocb->ki_pos | iov_iter_count(to) |
+ iov_iter_alignment(to)) & blksize_mask)
+ return -EINVAL;
- if (!err)
- return iomap_dio_rw(iocb, to, &erofs_iomap_ops,
- NULL, 0, NULL, 0);
- if (err < 0)
- return err;
+ return iomap_dio_rw(iocb, to, &erofs_iomap_ops,
+ NULL, 0, NULL, 0);
}
return filemap_read(iocb, to, 0);
}
j = 0;
/* 'valid' bounced can only be tested after a complete round */
- if (test_bit(j, bounced)) {
+ if (!rq->fillgaps && test_bit(j, bounced)) {
DBG_BUGON(i < lz4_max_distance_pages);
DBG_BUGON(top >= lz4_max_distance_pages);
availables[top++] = rq->out[i - lz4_max_distance_pages];
if (page) {
__clear_bit(j, bounced);
- if (kaddr) {
- if (kaddr + PAGE_SIZE == page_address(page))
+ if (!PageHighMem(page)) {
+ if (!i) {
+ kaddr = page_address(page);
+ continue;
+ }
+ if (kaddr &&
+ kaddr + PAGE_SIZE == page_address(page)) {
kaddr += PAGE_SIZE;
- else
- kaddr = NULL;
- } else if (!i) {
- kaddr = page_address(page);
+ continue;
+ }
}
+ kaddr = NULL;
continue;
}
kaddr = NULL;
DBG_BUGON(z_erofs_lzma_head);
z_erofs_lzma_head = head;
spin_unlock(&z_erofs_lzma_lock);
+ wake_up_all(&z_erofs_lzma_wq);
z_erofs_lzma_max_dictsize = dict_size;
mutex_unlock(&lzma_resize_mutex);
}
static int erofs_fill_dentries(struct inode *dir, struct dir_context *ctx,
- void *dentry_blk, unsigned int *ofs,
+ void *dentry_blk, struct erofs_dirent *de,
unsigned int nameoff, unsigned int maxsize)
{
- struct erofs_dirent *de = dentry_blk + *ofs;
const struct erofs_dirent *end = dentry_blk + nameoff;
while (de < end) {
/* stopped by some reason */
return 1;
++de;
- *ofs += sizeof(struct erofs_dirent);
+ ctx->pos += sizeof(struct erofs_dirent);
}
- *ofs = maxsize;
return 0;
}
nameoff = le16_to_cpu(de->nameoff);
if (nameoff < sizeof(struct erofs_dirent) ||
- nameoff >= PAGE_SIZE) {
+ nameoff >= EROFS_BLKSIZ) {
erofs_err(dir->i_sb,
"invalid de[0].nameoff %u @ nid %llu",
nameoff, EROFS_I(dir)->nid);
err = -EFSCORRUPTED;
- goto skip_this;
+ break;
}
maxsize = min_t(unsigned int,
- dirsize - ctx->pos + ofs, PAGE_SIZE);
+ dirsize - ctx->pos + ofs, EROFS_BLKSIZ);
/* search dirents at the arbitrary position */
if (initial) {
initial = false;
ofs = roundup(ofs, sizeof(struct erofs_dirent));
+ ctx->pos = blknr_to_addr(i) + ofs;
if (ofs >= nameoff)
goto skip_this;
}
- err = erofs_fill_dentries(dir, ctx, de, &ofs,
+ err = erofs_fill_dentries(dir, ctx, de, (void *)de + ofs,
nameoff, maxsize);
-skip_this:
- ctx->pos = blknr_to_addr(i) + ofs;
-
if (err)
break;
+skip_this:
+ ctx->pos = blknr_to_addr(i) + maxsize;
++i;
ofs = 0;
}
/*
* Copyright (C) 2018 HUAWEI, Inc.
* https://www.huawei.com/
+ * Copyright (C) 2022 Alibaba Cloud
*/
#include "zdata.h"
#include "compress.h"
_PCLP(Z_EROFS_PCLUSTER_MAX_PAGES)
};
+struct z_erofs_bvec_iter {
+ struct page *bvpage;
+ struct z_erofs_bvset *bvset;
+ unsigned int nr, cur;
+};
+
+static struct page *z_erofs_bvec_iter_end(struct z_erofs_bvec_iter *iter)
+{
+ if (iter->bvpage)
+ kunmap_local(iter->bvset);
+ return iter->bvpage;
+}
+
+static struct page *z_erofs_bvset_flip(struct z_erofs_bvec_iter *iter)
+{
+ unsigned long base = (unsigned long)((struct z_erofs_bvset *)0)->bvec;
+ /* have to access nextpage in advance, otherwise it will be unmapped */
+ struct page *nextpage = iter->bvset->nextpage;
+ struct page *oldpage;
+
+ DBG_BUGON(!nextpage);
+ oldpage = z_erofs_bvec_iter_end(iter);
+ iter->bvpage = nextpage;
+ iter->bvset = kmap_local_page(nextpage);
+ iter->nr = (PAGE_SIZE - base) / sizeof(struct z_erofs_bvec);
+ iter->cur = 0;
+ return oldpage;
+}
+
+static void z_erofs_bvec_iter_begin(struct z_erofs_bvec_iter *iter,
+ struct z_erofs_bvset_inline *bvset,
+ unsigned int bootstrap_nr,
+ unsigned int cur)
+{
+ *iter = (struct z_erofs_bvec_iter) {
+ .nr = bootstrap_nr,
+ .bvset = (struct z_erofs_bvset *)bvset,
+ };
+
+ while (cur > iter->nr) {
+ cur -= iter->nr;
+ z_erofs_bvset_flip(iter);
+ }
+ iter->cur = cur;
+}
+
+static int z_erofs_bvec_enqueue(struct z_erofs_bvec_iter *iter,
+ struct z_erofs_bvec *bvec,
+ struct page **candidate_bvpage)
+{
+ if (iter->cur == iter->nr) {
+ if (!*candidate_bvpage)
+ return -EAGAIN;
+
+ DBG_BUGON(iter->bvset->nextpage);
+ iter->bvset->nextpage = *candidate_bvpage;
+ z_erofs_bvset_flip(iter);
+
+ iter->bvset->nextpage = NULL;
+ *candidate_bvpage = NULL;
+ }
+ iter->bvset->bvec[iter->cur++] = *bvec;
+ return 0;
+}
+
+static void z_erofs_bvec_dequeue(struct z_erofs_bvec_iter *iter,
+ struct z_erofs_bvec *bvec,
+ struct page **old_bvpage)
+{
+ if (iter->cur == iter->nr)
+ *old_bvpage = z_erofs_bvset_flip(iter);
+ else
+ *old_bvpage = NULL;
+ *bvec = iter->bvset->bvec[iter->cur++];
+}
+
static void z_erofs_destroy_pcluster_pool(void)
{
int i;
for (pcs = pcluster_pool;
pcs < pcluster_pool + ARRAY_SIZE(pcluster_pool); ++pcs) {
- size = struct_size(a, compressed_pages, pcs->maxpages);
+ size = struct_size(a, compressed_bvecs, pcs->maxpages);
sprintf(pcs->name, "erofs_pcluster-%u", pcs->maxpages);
pcs->slab = kmem_cache_create(pcs->name, size, 0,
return err;
}
-enum z_erofs_collectmode {
- COLLECT_SECONDARY,
- COLLECT_PRIMARY,
+enum z_erofs_pclustermode {
+ Z_EROFS_PCLUSTER_INFLIGHT,
/*
- * The current collection was the tail of an exist chain, in addition
- * that the previous processed chained collections are all decided to
+ * The current pclusters was the tail of an exist chain, in addition
+ * that the previous processed chained pclusters are all decided to
* be hooked up to it.
- * A new chain will be created for the remaining collections which are
- * not processed yet, therefore different from COLLECT_PRIMARY_FOLLOWED,
- * the next collection cannot reuse the whole page safely in
- * the following scenario:
+ * A new chain will be created for the remaining pclusters which are
+ * not processed yet, so different from Z_EROFS_PCLUSTER_FOLLOWED,
+ * the next pcluster cannot reuse the whole page safely for inplace I/O
+ * in the following scenario:
* ________________________________________________________________
* | tail (partial) page | head (partial) page |
- * | (belongs to the next cl) | (belongs to the current cl) |
- * |_______PRIMARY_FOLLOWED_______|________PRIMARY_HOOKED___________|
+ * | (belongs to the next pcl) | (belongs to the current pcl) |
+ * |_______PCLUSTER_FOLLOWED______|________PCLUSTER_HOOKED__________|
*/
- COLLECT_PRIMARY_HOOKED,
+ Z_EROFS_PCLUSTER_HOOKED,
/*
- * a weak form of COLLECT_PRIMARY_FOLLOWED, the difference is that it
+ * a weak form of Z_EROFS_PCLUSTER_FOLLOWED, the difference is that it
* could be dispatched into bypass queue later due to uptodated managed
* pages. All related online pages cannot be reused for inplace I/O (or
- * pagevec) since it can be directly decoded without I/O submission.
+ * bvpage) since it can be directly decoded without I/O submission.
*/
- COLLECT_PRIMARY_FOLLOWED_NOINPLACE,
+ Z_EROFS_PCLUSTER_FOLLOWED_NOINPLACE,
/*
* The current collection has been linked with the owned chain, and
* could also be linked with the remaining collections, which means
* ________________________________________________________________
* | tail (partial) page | head (partial) page |
* | (of the current cl) | (of the previous collection) |
- * | PRIMARY_FOLLOWED or | |
- * |_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|
+ * | PCLUSTER_FOLLOWED or | |
+ * |_____PCLUSTER_HOOKED__|___________PCLUSTER_FOLLOWED____________|
*
* [ (*) the above page can be used as inplace I/O. ]
*/
- COLLECT_PRIMARY_FOLLOWED,
+ Z_EROFS_PCLUSTER_FOLLOWED,
};
struct z_erofs_decompress_frontend {
struct inode *const inode;
struct erofs_map_blocks map;
+ struct z_erofs_bvec_iter biter;
- struct z_erofs_pagevec_ctor vector;
-
+ struct page *candidate_bvpage;
struct z_erofs_pcluster *pcl, *tailpcl;
- /* a pointer used to pick up inplace I/O pages */
- struct page **icpage_ptr;
z_erofs_next_pcluster_t owned_head;
-
- enum z_erofs_collectmode mode;
+ enum z_erofs_pclustermode mode;
bool readahead;
/* used for applying cache strategy on the fly */
bool backmost;
erofs_off_t headoffset;
+
+ /* a pointer used to pick up inplace I/O pages */
+ unsigned int icur;
};
#define DECOMPRESS_FRONTEND_INIT(__i) { \
.inode = __i, .owned_head = Z_EROFS_PCLUSTER_TAIL, \
- .mode = COLLECT_PRIMARY_FOLLOWED, .backmost = true }
-
-static struct page *z_pagemap_global[Z_EROFS_VMAP_GLOBAL_PAGES];
-static DEFINE_MUTEX(z_pagemap_global_lock);
+ .mode = Z_EROFS_PCLUSTER_FOLLOWED, .backmost = true }
static void z_erofs_bind_cache(struct z_erofs_decompress_frontend *fe,
enum z_erofs_cache_alloctype type,
*/
gfp_t gfp = (mapping_gfp_mask(mc) & ~__GFP_DIRECT_RECLAIM) |
__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN;
- struct page **pages;
- pgoff_t index;
+ unsigned int i;
- if (fe->mode < COLLECT_PRIMARY_FOLLOWED)
+ if (fe->mode < Z_EROFS_PCLUSTER_FOLLOWED)
return;
- pages = pcl->compressed_pages;
- index = pcl->obj.index;
- for (; index < pcl->obj.index + pcl->pclusterpages; ++index, ++pages) {
+ for (i = 0; i < pcl->pclusterpages; ++i) {
struct page *page;
compressed_page_t t;
struct page *newpage = NULL;
/* the compressed page was loaded before */
- if (READ_ONCE(*pages))
+ if (READ_ONCE(pcl->compressed_bvecs[i].page))
continue;
- page = find_get_page(mc, index);
+ page = find_get_page(mc, pcl->obj.index + i);
if (page) {
t = tag_compressed_page_justfound(page);
}
}
- if (!cmpxchg_relaxed(pages, NULL, tagptr_cast_ptr(t)))
+ if (!cmpxchg_relaxed(&pcl->compressed_bvecs[i].page, NULL,
+ tagptr_cast_ptr(t)))
continue;
if (page)
* managed cache since it can be moved to the bypass queue instead.
*/
if (standalone)
- fe->mode = COLLECT_PRIMARY_FOLLOWED_NOINPLACE;
+ fe->mode = Z_EROFS_PCLUSTER_FOLLOWED_NOINPLACE;
}
/* called by erofs_shrinker to get rid of all compressed_pages */
* therefore no need to worry about available decompression users.
*/
for (i = 0; i < pcl->pclusterpages; ++i) {
- struct page *page = pcl->compressed_pages[i];
+ struct page *page = pcl->compressed_bvecs[i].page;
if (!page)
continue;
continue;
/* barrier is implied in the following 'unlock_page' */
- WRITE_ONCE(pcl->compressed_pages[i], NULL);
+ WRITE_ONCE(pcl->compressed_bvecs[i].page, NULL);
detach_page_private(page);
unlock_page(page);
}
int erofs_try_to_free_cached_page(struct page *page)
{
struct z_erofs_pcluster *const pcl = (void *)page_private(page);
- int ret = 0; /* 0 - busy */
+ int ret, i;
- if (erofs_workgroup_try_to_freeze(&pcl->obj, 1)) {
- unsigned int i;
+ if (!erofs_workgroup_try_to_freeze(&pcl->obj, 1))
+ return 0;
- DBG_BUGON(z_erofs_is_inline_pcluster(pcl));
- for (i = 0; i < pcl->pclusterpages; ++i) {
- if (pcl->compressed_pages[i] == page) {
- WRITE_ONCE(pcl->compressed_pages[i], NULL);
- ret = 1;
- break;
- }
+ ret = 0;
+ DBG_BUGON(z_erofs_is_inline_pcluster(pcl));
+ for (i = 0; i < pcl->pclusterpages; ++i) {
+ if (pcl->compressed_bvecs[i].page == page) {
+ WRITE_ONCE(pcl->compressed_bvecs[i].page, NULL);
+ ret = 1;
+ break;
}
- erofs_workgroup_unfreeze(&pcl->obj, 1);
-
- if (ret)
- detach_page_private(page);
}
+ erofs_workgroup_unfreeze(&pcl->obj, 1);
+ if (ret)
+ detach_page_private(page);
return ret;
}
-/* page_type must be Z_EROFS_PAGE_TYPE_EXCLUSIVE */
static bool z_erofs_try_inplace_io(struct z_erofs_decompress_frontend *fe,
- struct page *page)
+ struct z_erofs_bvec *bvec)
{
struct z_erofs_pcluster *const pcl = fe->pcl;
- while (fe->icpage_ptr > pcl->compressed_pages)
- if (!cmpxchg(--fe->icpage_ptr, NULL, page))
+ while (fe->icur > 0) {
+ if (!cmpxchg(&pcl->compressed_bvecs[--fe->icur].page,
+ NULL, bvec->page)) {
+ pcl->compressed_bvecs[fe->icur] = *bvec;
return true;
+ }
+ }
return false;
}
/* callers must be with pcluster lock held */
static int z_erofs_attach_page(struct z_erofs_decompress_frontend *fe,
- struct page *page, enum z_erofs_page_type type,
- bool pvec_safereuse)
+ struct z_erofs_bvec *bvec, bool exclusive)
{
int ret;
- /* give priority for inplaceio */
- if (fe->mode >= COLLECT_PRIMARY &&
- type == Z_EROFS_PAGE_TYPE_EXCLUSIVE &&
- z_erofs_try_inplace_io(fe, page))
- return 0;
-
- ret = z_erofs_pagevec_enqueue(&fe->vector, page, type,
- pvec_safereuse);
- fe->pcl->vcnt += (unsigned int)ret;
- return ret ? 0 : -EAGAIN;
+ if (exclusive) {
+ /* give priority for inplaceio to use file pages first */
+ if (z_erofs_try_inplace_io(fe, bvec))
+ return 0;
+ /* otherwise, check if it can be used as a bvpage */
+ if (fe->mode >= Z_EROFS_PCLUSTER_FOLLOWED &&
+ !fe->candidate_bvpage)
+ fe->candidate_bvpage = bvec->page;
+ }
+ ret = z_erofs_bvec_enqueue(&fe->biter, bvec, &fe->candidate_bvpage);
+ fe->pcl->vcnt += (ret >= 0);
+ return ret;
}
static void z_erofs_try_to_claim_pcluster(struct z_erofs_decompress_frontend *f)
*owned_head) == Z_EROFS_PCLUSTER_NIL) {
*owned_head = &pcl->next;
/* so we can attach this pcluster to our submission chain. */
- f->mode = COLLECT_PRIMARY_FOLLOWED;
+ f->mode = Z_EROFS_PCLUSTER_FOLLOWED;
return;
}
* type 2, link to the end of an existing open chain, be careful
* that its submission is controlled by the original attached chain.
*/
- if (cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
+ if (*owned_head != &pcl->next && pcl != f->tailpcl &&
+ cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
*owned_head) == Z_EROFS_PCLUSTER_TAIL) {
*owned_head = Z_EROFS_PCLUSTER_TAIL;
- f->mode = COLLECT_PRIMARY_HOOKED;
+ f->mode = Z_EROFS_PCLUSTER_HOOKED;
f->tailpcl = NULL;
return;
}
/* type 3, it belongs to a chain, but it isn't the end of the chain */
- f->mode = COLLECT_PRIMARY;
+ f->mode = Z_EROFS_PCLUSTER_INFLIGHT;
}
-static int z_erofs_lookup_pcluster(struct z_erofs_decompress_frontend *fe,
- struct inode *inode,
- struct erofs_map_blocks *map)
-{
- struct z_erofs_pcluster *pcl = fe->pcl;
- unsigned int length;
-
- /* to avoid unexpected loop formed by corrupted images */
- if (fe->owned_head == &pcl->next || pcl == fe->tailpcl) {
- DBG_BUGON(1);
- return -EFSCORRUPTED;
- }
-
- if (pcl->pageofs_out != (map->m_la & ~PAGE_MASK)) {
- DBG_BUGON(1);
- return -EFSCORRUPTED;
- }
-
- length = READ_ONCE(pcl->length);
- if (length & Z_EROFS_PCLUSTER_FULL_LENGTH) {
- if ((map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) > length) {
- DBG_BUGON(1);
- return -EFSCORRUPTED;
- }
- } else {
- unsigned int llen = map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT;
-
- if (map->m_flags & EROFS_MAP_FULL_MAPPED)
- llen |= Z_EROFS_PCLUSTER_FULL_LENGTH;
-
- while (llen > length &&
- length != cmpxchg_relaxed(&pcl->length, length, llen)) {
- cpu_relax();
- length = READ_ONCE(pcl->length);
- }
- }
- mutex_lock(&pcl->lock);
- /* used to check tail merging loop due to corrupted images */
- if (fe->owned_head == Z_EROFS_PCLUSTER_TAIL)
- fe->tailpcl = pcl;
-
- z_erofs_try_to_claim_pcluster(fe);
- return 0;
-}
-
-static int z_erofs_register_pcluster(struct z_erofs_decompress_frontend *fe,
- struct inode *inode,
- struct erofs_map_blocks *map)
+static int z_erofs_register_pcluster(struct z_erofs_decompress_frontend *fe)
{
+ struct erofs_map_blocks *map = &fe->map;
bool ztailpacking = map->m_flags & EROFS_MAP_META;
struct z_erofs_pcluster *pcl;
struct erofs_workgroup *grp;
atomic_set(&pcl->obj.refcount, 1);
pcl->algorithmformat = map->m_algorithmformat;
- pcl->length = (map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) |
- (map->m_flags & EROFS_MAP_FULL_MAPPED ?
- Z_EROFS_PCLUSTER_FULL_LENGTH : 0);
+ pcl->length = 0;
+ pcl->partial = true;
/* new pclusters should be claimed as type 1, primary and followed */
pcl->next = fe->owned_head;
pcl->pageofs_out = map->m_la & ~PAGE_MASK;
- fe->mode = COLLECT_PRIMARY_FOLLOWED;
+ fe->mode = Z_EROFS_PCLUSTER_FOLLOWED;
/*
* lock all primary followed works before visible to others
} else {
pcl->obj.index = map->m_pa >> PAGE_SHIFT;
- grp = erofs_insert_workgroup(inode->i_sb, &pcl->obj);
+ grp = erofs_insert_workgroup(fe->inode->i_sb, &pcl->obj);
if (IS_ERR(grp)) {
err = PTR_ERR(grp);
goto err_out;
return err;
}
-static int z_erofs_collector_begin(struct z_erofs_decompress_frontend *fe,
- struct inode *inode,
- struct erofs_map_blocks *map)
+static int z_erofs_collector_begin(struct z_erofs_decompress_frontend *fe)
{
- struct erofs_workgroup *grp;
+ struct erofs_map_blocks *map = &fe->map;
+ struct erofs_workgroup *grp = NULL;
int ret;
DBG_BUGON(fe->pcl);
DBG_BUGON(fe->owned_head == Z_EROFS_PCLUSTER_NIL);
DBG_BUGON(fe->owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
- if (map->m_flags & EROFS_MAP_META) {
- if ((map->m_pa & ~PAGE_MASK) + map->m_plen > PAGE_SIZE) {
- DBG_BUGON(1);
- return -EFSCORRUPTED;
- }
- goto tailpacking;
+ if (!(map->m_flags & EROFS_MAP_META)) {
+ grp = erofs_find_workgroup(fe->inode->i_sb,
+ map->m_pa >> PAGE_SHIFT);
+ } else if ((map->m_pa & ~PAGE_MASK) + map->m_plen > PAGE_SIZE) {
+ DBG_BUGON(1);
+ return -EFSCORRUPTED;
}
- grp = erofs_find_workgroup(inode->i_sb, map->m_pa >> PAGE_SHIFT);
if (grp) {
fe->pcl = container_of(grp, struct z_erofs_pcluster, obj);
+ ret = -EEXIST;
} else {
-tailpacking:
- ret = z_erofs_register_pcluster(fe, inode, map);
- if (!ret)
- goto out;
- if (ret != -EEXIST)
- return ret;
+ ret = z_erofs_register_pcluster(fe);
}
- ret = z_erofs_lookup_pcluster(fe, inode, map);
- if (ret) {
- erofs_workgroup_put(&fe->pcl->obj);
+ if (ret == -EEXIST) {
+ mutex_lock(&fe->pcl->lock);
+ /* used to check tail merging loop due to corrupted images */
+ if (fe->owned_head == Z_EROFS_PCLUSTER_TAIL)
+ fe->tailpcl = fe->pcl;
+
+ z_erofs_try_to_claim_pcluster(fe);
+ } else if (ret) {
return ret;
}
-
-out:
- z_erofs_pagevec_ctor_init(&fe->vector, Z_EROFS_NR_INLINE_PAGEVECS,
- fe->pcl->pagevec, fe->pcl->vcnt);
+ z_erofs_bvec_iter_begin(&fe->biter, &fe->pcl->bvset,
+ Z_EROFS_INLINE_BVECS, fe->pcl->vcnt);
/* since file-backed online pages are traversed in reverse order */
- fe->icpage_ptr = fe->pcl->compressed_pages +
- z_erofs_pclusterpages(fe->pcl);
+ fe->icur = z_erofs_pclusterpages(fe->pcl);
return 0;
}
if (!pcl)
return false;
- z_erofs_pagevec_ctor_exit(&fe->vector, false);
+ z_erofs_bvec_iter_end(&fe->biter);
mutex_unlock(&pcl->lock);
+ if (fe->candidate_bvpage) {
+ DBG_BUGON(z_erofs_is_shortlived_page(fe->candidate_bvpage));
+ fe->candidate_bvpage = NULL;
+ }
+
/*
* if all pending pages are added, don't hold its reference
* any longer if the pcluster isn't hosted by ourselves.
*/
- if (fe->mode < COLLECT_PRIMARY_FOLLOWED_NOINPLACE)
+ if (fe->mode < Z_EROFS_PCLUSTER_FOLLOWED_NOINPLACE)
erofs_workgroup_put(&pcl->obj);
fe->pcl = NULL;
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
struct erofs_map_blocks *const map = &fe->map;
const loff_t offset = page_offset(page);
- bool tight = true;
+ bool tight = true, exclusive;
enum z_erofs_cache_alloctype cache_strategy;
- enum z_erofs_page_type page_type;
- unsigned int cur, end, spiltted, index;
+ unsigned int cur, end, spiltted;
int err = 0;
/* register locked file pages as online pages in pack */
map->m_llen = 0;
err = z_erofs_map_blocks_iter(inode, map, 0);
if (err)
- goto err_out;
+ goto out;
} else {
if (fe->pcl)
goto hitted;
if (!(map->m_flags & EROFS_MAP_MAPPED))
goto hitted;
- err = z_erofs_collector_begin(fe, inode, map);
+ err = z_erofs_collector_begin(fe);
if (err)
- goto err_out;
+ goto out;
if (z_erofs_is_inline_pcluster(fe->pcl)) {
void *mp;
err = PTR_ERR(mp);
erofs_err(inode->i_sb,
"failed to get inline page, err %d", err);
- goto err_out;
+ goto out;
}
get_page(fe->map.buf.page);
- WRITE_ONCE(fe->pcl->compressed_pages[0], fe->map.buf.page);
- fe->mode = COLLECT_PRIMARY_FOLLOWED_NOINPLACE;
+ WRITE_ONCE(fe->pcl->compressed_bvecs[0].page,
+ fe->map.buf.page);
+ fe->mode = Z_EROFS_PCLUSTER_FOLLOWED_NOINPLACE;
} else {
/* bind cache first when cached decompression is preferred */
if (should_alloc_managed_pages(fe, sbi->opt.cache_strategy,
* Ensure the current partial page belongs to this submit chain rather
* than other concurrent submit chains or the noio(bypass) chain since
* those chains are handled asynchronously thus the page cannot be used
- * for inplace I/O or pagevec (should be processed in strict order.)
+ * for inplace I/O or bvpage (should be processed in a strict order.)
*/
- tight &= (fe->mode >= COLLECT_PRIMARY_HOOKED &&
- fe->mode != COLLECT_PRIMARY_FOLLOWED_NOINPLACE);
+ tight &= (fe->mode >= Z_EROFS_PCLUSTER_HOOKED &&
+ fe->mode != Z_EROFS_PCLUSTER_FOLLOWED_NOINPLACE);
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
if (!(map->m_flags & EROFS_MAP_MAPPED)) {
goto next_part;
}
- /* let's derive page type */
- page_type = cur ? Z_EROFS_VLE_PAGE_TYPE_HEAD :
- (!spiltted ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
- (tight ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
- Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED));
-
+ exclusive = (!cur && (!spiltted || tight));
if (cur)
- tight &= (fe->mode >= COLLECT_PRIMARY_FOLLOWED);
+ tight &= (fe->mode >= Z_EROFS_PCLUSTER_FOLLOWED);
retry:
- err = z_erofs_attach_page(fe, page, page_type,
- fe->mode >= COLLECT_PRIMARY_FOLLOWED);
- /* should allocate an additional short-lived page for pagevec */
- if (err == -EAGAIN) {
- struct page *const newpage =
- alloc_page(GFP_NOFS | __GFP_NOFAIL);
-
- set_page_private(newpage, Z_EROFS_SHORTLIVED_PAGE);
- err = z_erofs_attach_page(fe, newpage,
- Z_EROFS_PAGE_TYPE_EXCLUSIVE, true);
- if (!err)
- goto retry;
+ err = z_erofs_attach_page(fe, &((struct z_erofs_bvec) {
+ .page = page,
+ .offset = offset - map->m_la,
+ .end = end,
+ }), exclusive);
+ /* should allocate an additional short-lived page for bvset */
+ if (err == -EAGAIN && !fe->candidate_bvpage) {
+ fe->candidate_bvpage = alloc_page(GFP_NOFS | __GFP_NOFAIL);
+ set_page_private(fe->candidate_bvpage,
+ Z_EROFS_SHORTLIVED_PAGE);
+ goto retry;
}
- if (err)
- goto err_out;
-
- index = page->index - (map->m_la >> PAGE_SHIFT);
-
- z_erofs_onlinepage_fixup(page, index, true);
+ if (err) {
+ DBG_BUGON(err == -EAGAIN && fe->candidate_bvpage);
+ goto out;
+ }
+ z_erofs_onlinepage_split(page);
/* bump up the number of spiltted parts of a page */
++spiltted;
- /* also update nr_pages */
- fe->pcl->nr_pages = max_t(pgoff_t, fe->pcl->nr_pages, index + 1);
+ if (fe->pcl->pageofs_out != (map->m_la & ~PAGE_MASK))
+ fe->pcl->multibases = true;
+
+ if ((map->m_flags & EROFS_MAP_FULL_MAPPED) &&
+ fe->pcl->length == map->m_llen)
+ fe->pcl->partial = false;
+ if (fe->pcl->length < offset + end - map->m_la) {
+ fe->pcl->length = offset + end - map->m_la;
+ fe->pcl->pageofs_out = map->m_la & ~PAGE_MASK;
+ }
next_part:
- /* can be used for verification */
+ /* shorten the remaining extent to update progress */
map->m_llen = offset + cur - map->m_la;
+ map->m_flags &= ~EROFS_MAP_FULL_MAPPED;
end = cur;
if (end > 0)
goto repeat;
out:
+ if (err)
+ z_erofs_page_mark_eio(page);
z_erofs_onlinepage_endio(page);
erofs_dbg("%s, finish page: %pK spiltted: %u map->m_llen %llu",
__func__, page, spiltted, map->m_llen);
return err;
-
- /* if some error occurred while processing this page */
-err_out:
- SetPageError(page);
- goto out;
}
static bool z_erofs_get_sync_decompress_policy(struct erofs_sb_info *sbi,
return !page->mapping && !z_erofs_is_shortlived_page(page);
}
-static int z_erofs_decompress_pcluster(struct super_block *sb,
- struct z_erofs_pcluster *pcl,
- struct page **pagepool)
-{
- struct erofs_sb_info *const sbi = EROFS_SB(sb);
- unsigned int pclusterpages = z_erofs_pclusterpages(pcl);
- struct z_erofs_pagevec_ctor ctor;
- unsigned int i, inputsize, outputsize, llen, nr_pages;
- struct page *pages_onstack[Z_EROFS_VMAP_ONSTACK_PAGES];
- struct page **pages, **compressed_pages, *page;
+struct z_erofs_decompress_backend {
+ struct page *onstack_pages[Z_EROFS_ONSTACK_PAGES];
+ struct super_block *sb;
+ struct z_erofs_pcluster *pcl;
- enum z_erofs_page_type page_type;
- bool overlapped, partial;
- int err;
+ /* pages with the longest decompressed length for deduplication */
+ struct page **decompressed_pages;
+ /* pages to keep the compressed data */
+ struct page **compressed_pages;
- might_sleep();
- DBG_BUGON(!READ_ONCE(pcl->nr_pages));
+ struct list_head decompressed_secondary_bvecs;
+ struct page **pagepool;
+ unsigned int onstack_used, nr_pages;
+};
- mutex_lock(&pcl->lock);
- nr_pages = pcl->nr_pages;
+struct z_erofs_bvec_item {
+ struct z_erofs_bvec bvec;
+ struct list_head list;
+};
- if (nr_pages <= Z_EROFS_VMAP_ONSTACK_PAGES) {
- pages = pages_onstack;
- } else if (nr_pages <= Z_EROFS_VMAP_GLOBAL_PAGES &&
- mutex_trylock(&z_pagemap_global_lock)) {
- pages = z_pagemap_global;
- } else {
- gfp_t gfp_flags = GFP_KERNEL;
+static void z_erofs_do_decompressed_bvec(struct z_erofs_decompress_backend *be,
+ struct z_erofs_bvec *bvec)
+{
+ struct z_erofs_bvec_item *item;
- if (nr_pages > Z_EROFS_VMAP_GLOBAL_PAGES)
- gfp_flags |= __GFP_NOFAIL;
+ if (!((bvec->offset + be->pcl->pageofs_out) & ~PAGE_MASK)) {
+ unsigned int pgnr;
+ struct page *oldpage;
- pages = kvmalloc_array(nr_pages, sizeof(struct page *),
- gfp_flags);
+ pgnr = (bvec->offset + be->pcl->pageofs_out) >> PAGE_SHIFT;
+ DBG_BUGON(pgnr >= be->nr_pages);
+ oldpage = be->decompressed_pages[pgnr];
+ be->decompressed_pages[pgnr] = bvec->page;
- /* fallback to global pagemap for the lowmem scenario */
- if (!pages) {
- mutex_lock(&z_pagemap_global_lock);
- pages = z_pagemap_global;
- }
+ if (!oldpage)
+ return;
}
- for (i = 0; i < nr_pages; ++i)
- pages[i] = NULL;
-
- err = 0;
- z_erofs_pagevec_ctor_init(&ctor, Z_EROFS_NR_INLINE_PAGEVECS,
- pcl->pagevec, 0);
-
- for (i = 0; i < pcl->vcnt; ++i) {
- unsigned int pagenr;
+ /* (cold path) one pcluster is requested multiple times */
+ item = kmalloc(sizeof(*item), GFP_KERNEL | __GFP_NOFAIL);
+ item->bvec = *bvec;
+ list_add(&item->list, &be->decompressed_secondary_bvecs);
+}
- page = z_erofs_pagevec_dequeue(&ctor, &page_type);
+static void z_erofs_fill_other_copies(struct z_erofs_decompress_backend *be,
+ int err)
+{
+ unsigned int off0 = be->pcl->pageofs_out;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &be->decompressed_secondary_bvecs) {
+ struct z_erofs_bvec_item *bvi;
+ unsigned int end, cur;
+ void *dst, *src;
+
+ bvi = container_of(p, struct z_erofs_bvec_item, list);
+ cur = bvi->bvec.offset < 0 ? -bvi->bvec.offset : 0;
+ end = min_t(unsigned int, be->pcl->length - bvi->bvec.offset,
+ bvi->bvec.end);
+ dst = kmap_local_page(bvi->bvec.page);
+ while (cur < end) {
+ unsigned int pgnr, scur, len;
+
+ pgnr = (bvi->bvec.offset + cur + off0) >> PAGE_SHIFT;
+ DBG_BUGON(pgnr >= be->nr_pages);
+
+ scur = bvi->bvec.offset + cur -
+ ((pgnr << PAGE_SHIFT) - off0);
+ len = min_t(unsigned int, end - cur, PAGE_SIZE - scur);
+ if (!be->decompressed_pages[pgnr]) {
+ err = -EFSCORRUPTED;
+ cur += len;
+ continue;
+ }
+ src = kmap_local_page(be->decompressed_pages[pgnr]);
+ memcpy(dst + cur, src + scur, len);
+ kunmap_local(src);
+ cur += len;
+ }
+ kunmap_local(dst);
+ if (err)
+ z_erofs_page_mark_eio(bvi->bvec.page);
+ z_erofs_onlinepage_endio(bvi->bvec.page);
+ list_del(p);
+ kfree(bvi);
+ }
+}
- /* all pages in pagevec ought to be valid */
- DBG_BUGON(!page);
- DBG_BUGON(z_erofs_page_is_invalidated(page));
+static void z_erofs_parse_out_bvecs(struct z_erofs_decompress_backend *be)
+{
+ struct z_erofs_pcluster *pcl = be->pcl;
+ struct z_erofs_bvec_iter biter;
+ struct page *old_bvpage;
+ int i;
- if (z_erofs_put_shortlivedpage(pagepool, page))
- continue;
+ z_erofs_bvec_iter_begin(&biter, &pcl->bvset, Z_EROFS_INLINE_BVECS, 0);
+ for (i = 0; i < pcl->vcnt; ++i) {
+ struct z_erofs_bvec bvec;
- if (page_type == Z_EROFS_VLE_PAGE_TYPE_HEAD)
- pagenr = 0;
- else
- pagenr = z_erofs_onlinepage_index(page);
+ z_erofs_bvec_dequeue(&biter, &bvec, &old_bvpage);
- DBG_BUGON(pagenr >= nr_pages);
+ if (old_bvpage)
+ z_erofs_put_shortlivedpage(be->pagepool, old_bvpage);
- /*
- * currently EROFS doesn't support multiref(dedup),
- * so here erroring out one multiref page.
- */
- if (pages[pagenr]) {
- DBG_BUGON(1);
- SetPageError(pages[pagenr]);
- z_erofs_onlinepage_endio(pages[pagenr]);
- err = -EFSCORRUPTED;
- }
- pages[pagenr] = page;
+ DBG_BUGON(z_erofs_page_is_invalidated(bvec.page));
+ z_erofs_do_decompressed_bvec(be, &bvec);
}
- z_erofs_pagevec_ctor_exit(&ctor, true);
- overlapped = false;
- compressed_pages = pcl->compressed_pages;
+ old_bvpage = z_erofs_bvec_iter_end(&biter);
+ if (old_bvpage)
+ z_erofs_put_shortlivedpage(be->pagepool, old_bvpage);
+}
+static int z_erofs_parse_in_bvecs(struct z_erofs_decompress_backend *be,
+ bool *overlapped)
+{
+ struct z_erofs_pcluster *pcl = be->pcl;
+ unsigned int pclusterpages = z_erofs_pclusterpages(pcl);
+ int i, err = 0;
+
+ *overlapped = false;
for (i = 0; i < pclusterpages; ++i) {
- unsigned int pagenr;
+ struct z_erofs_bvec *bvec = &pcl->compressed_bvecs[i];
+ struct page *page = bvec->page;
- page = compressed_pages[i];
- /* all compressed pages ought to be valid */
- DBG_BUGON(!page);
+ /* compressed pages ought to be present before decompressing */
+ if (!page) {
+ DBG_BUGON(1);
+ continue;
+ }
+ be->compressed_pages[i] = page;
if (z_erofs_is_inline_pcluster(pcl)) {
if (!PageUptodate(page))
DBG_BUGON(z_erofs_page_is_invalidated(page));
if (!z_erofs_is_shortlived_page(page)) {
- if (erofs_page_is_managed(sbi, page)) {
+ if (erofs_page_is_managed(EROFS_SB(be->sb), page)) {
if (!PageUptodate(page))
err = -EIO;
continue;
}
+ z_erofs_do_decompressed_bvec(be, bvec);
+ *overlapped = true;
+ }
+ }
- /*
- * only if non-head page can be selected
- * for inplace decompression
- */
- pagenr = z_erofs_onlinepage_index(page);
-
- DBG_BUGON(pagenr >= nr_pages);
- if (pages[pagenr]) {
- DBG_BUGON(1);
- SetPageError(pages[pagenr]);
- z_erofs_onlinepage_endio(pages[pagenr]);
- err = -EFSCORRUPTED;
- }
- pages[pagenr] = page;
+ if (err)
+ return err;
+ return 0;
+}
- overlapped = true;
- }
+static int z_erofs_decompress_pcluster(struct z_erofs_decompress_backend *be,
+ int err)
+{
+ struct erofs_sb_info *const sbi = EROFS_SB(be->sb);
+ struct z_erofs_pcluster *pcl = be->pcl;
+ unsigned int pclusterpages = z_erofs_pclusterpages(pcl);
+ unsigned int i, inputsize;
+ int err2;
+ struct page *page;
+ bool overlapped;
- /* PG_error needs checking for all non-managed pages */
- if (PageError(page)) {
- DBG_BUGON(PageUptodate(page));
- err = -EIO;
- }
+ mutex_lock(&pcl->lock);
+ be->nr_pages = PAGE_ALIGN(pcl->length + pcl->pageofs_out) >> PAGE_SHIFT;
+
+ /* allocate (de)compressed page arrays if cannot be kept on stack */
+ be->decompressed_pages = NULL;
+ be->compressed_pages = NULL;
+ be->onstack_used = 0;
+ if (be->nr_pages <= Z_EROFS_ONSTACK_PAGES) {
+ be->decompressed_pages = be->onstack_pages;
+ be->onstack_used = be->nr_pages;
+ memset(be->decompressed_pages, 0,
+ sizeof(struct page *) * be->nr_pages);
}
+ if (pclusterpages + be->onstack_used <= Z_EROFS_ONSTACK_PAGES)
+ be->compressed_pages = be->onstack_pages + be->onstack_used;
+
+ if (!be->decompressed_pages)
+ be->decompressed_pages =
+ kvcalloc(be->nr_pages, sizeof(struct page *),
+ GFP_KERNEL | __GFP_NOFAIL);
+ if (!be->compressed_pages)
+ be->compressed_pages =
+ kvcalloc(pclusterpages, sizeof(struct page *),
+ GFP_KERNEL | __GFP_NOFAIL);
+
+ z_erofs_parse_out_bvecs(be);
+ err2 = z_erofs_parse_in_bvecs(be, &overlapped);
+ if (err2)
+ err = err2;
if (err)
goto out;
- llen = pcl->length >> Z_EROFS_PCLUSTER_LENGTH_BIT;
- if (nr_pages << PAGE_SHIFT >= pcl->pageofs_out + llen) {
- outputsize = llen;
- partial = !(pcl->length & Z_EROFS_PCLUSTER_FULL_LENGTH);
- } else {
- outputsize = (nr_pages << PAGE_SHIFT) - pcl->pageofs_out;
- partial = true;
- }
-
if (z_erofs_is_inline_pcluster(pcl))
inputsize = pcl->tailpacking_size;
else
inputsize = pclusterpages * PAGE_SIZE;
err = z_erofs_decompress(&(struct z_erofs_decompress_req) {
- .sb = sb,
- .in = compressed_pages,
- .out = pages,
+ .sb = be->sb,
+ .in = be->compressed_pages,
+ .out = be->decompressed_pages,
.pageofs_in = pcl->pageofs_in,
.pageofs_out = pcl->pageofs_out,
.inputsize = inputsize,
- .outputsize = outputsize,
+ .outputsize = pcl->length,
.alg = pcl->algorithmformat,
.inplace_io = overlapped,
- .partial_decoding = partial
- }, pagepool);
+ .partial_decoding = pcl->partial,
+ .fillgaps = pcl->multibases,
+ }, be->pagepool);
out:
/* must handle all compressed pages before actual file pages */
if (z_erofs_is_inline_pcluster(pcl)) {
- page = compressed_pages[0];
- WRITE_ONCE(compressed_pages[0], NULL);
+ page = pcl->compressed_bvecs[0].page;
+ WRITE_ONCE(pcl->compressed_bvecs[0].page, NULL);
put_page(page);
} else {
for (i = 0; i < pclusterpages; ++i) {
- page = compressed_pages[i];
+ page = pcl->compressed_bvecs[i].page;
if (erofs_page_is_managed(sbi, page))
continue;
/* recycle all individual short-lived pages */
- (void)z_erofs_put_shortlivedpage(pagepool, page);
- WRITE_ONCE(compressed_pages[i], NULL);
+ (void)z_erofs_put_shortlivedpage(be->pagepool, page);
+ WRITE_ONCE(pcl->compressed_bvecs[i].page, NULL);
}
}
+ if (be->compressed_pages < be->onstack_pages ||
+ be->compressed_pages >= be->onstack_pages + Z_EROFS_ONSTACK_PAGES)
+ kvfree(be->compressed_pages);
+ z_erofs_fill_other_copies(be, err);
- for (i = 0; i < nr_pages; ++i) {
- page = pages[i];
+ for (i = 0; i < be->nr_pages; ++i) {
+ page = be->decompressed_pages[i];
if (!page)
continue;
DBG_BUGON(z_erofs_page_is_invalidated(page));
/* recycle all individual short-lived pages */
- if (z_erofs_put_shortlivedpage(pagepool, page))
+ if (z_erofs_put_shortlivedpage(be->pagepool, page))
continue;
-
- if (err < 0)
- SetPageError(page);
-
+ if (err)
+ z_erofs_page_mark_eio(page);
z_erofs_onlinepage_endio(page);
}
- if (pages == z_pagemap_global)
- mutex_unlock(&z_pagemap_global_lock);
- else if (pages != pages_onstack)
- kvfree(pages);
+ if (be->decompressed_pages != be->onstack_pages)
+ kvfree(be->decompressed_pages);
- pcl->nr_pages = 0;
+ pcl->length = 0;
+ pcl->partial = true;
+ pcl->multibases = false;
+ pcl->bvset.nextpage = NULL;
pcl->vcnt = 0;
/* pcluster lock MUST be taken before the following line */
static void z_erofs_decompress_queue(const struct z_erofs_decompressqueue *io,
struct page **pagepool)
{
+ struct z_erofs_decompress_backend be = {
+ .sb = io->sb,
+ .pagepool = pagepool,
+ .decompressed_secondary_bvecs =
+ LIST_HEAD_INIT(be.decompressed_secondary_bvecs),
+ };
z_erofs_next_pcluster_t owned = io->head;
while (owned != Z_EROFS_PCLUSTER_TAIL_CLOSED) {
- struct z_erofs_pcluster *pcl;
-
- /* no possible that 'owned' equals Z_EROFS_WORK_TPTR_TAIL */
+ /* impossible that 'owned' equals Z_EROFS_WORK_TPTR_TAIL */
DBG_BUGON(owned == Z_EROFS_PCLUSTER_TAIL);
-
- /* no possible that 'owned' equals NULL */
+ /* impossible that 'owned' equals Z_EROFS_PCLUSTER_NIL */
DBG_BUGON(owned == Z_EROFS_PCLUSTER_NIL);
- pcl = container_of(owned, struct z_erofs_pcluster, next);
- owned = READ_ONCE(pcl->next);
+ be.pcl = container_of(owned, struct z_erofs_pcluster, next);
+ owned = READ_ONCE(be.pcl->next);
- z_erofs_decompress_pcluster(io->sb, pcl, pagepool);
- erofs_workgroup_put(&pcl->obj);
+ z_erofs_decompress_pcluster(&be, io->eio ? -EIO : 0);
+ erofs_workgroup_put(&be.pcl->obj);
}
}
if (sync) {
if (!atomic_add_return(bios, &io->pending_bios))
complete(&io->u.done);
-
return;
}
int justfound;
repeat:
- page = READ_ONCE(pcl->compressed_pages[nr]);
+ page = READ_ONCE(pcl->compressed_bvecs[nr].page);
oldpage = page;
if (!page)
* otherwise, it will go inplace I/O path instead.
*/
if (page->private == Z_EROFS_PREALLOCATED_PAGE) {
- WRITE_ONCE(pcl->compressed_pages[nr], page);
+ WRITE_ONCE(pcl->compressed_bvecs[nr].page, page);
set_page_private(page, 0);
tocache = true;
goto out_tocache;
/* the page is still in manage cache */
if (page->mapping == mc) {
- WRITE_ONCE(pcl->compressed_pages[nr], page);
+ WRITE_ONCE(pcl->compressed_bvecs[nr].page, page);
- ClearPageError(page);
if (!PagePrivate(page)) {
/*
* impossible to be !PagePrivate(page) for
* the current restriction as well if
- * the page is already in compressed_pages[].
+ * the page is already in compressed_bvecs[].
*/
DBG_BUGON(!justfound);
put_page(page);
out_allocpage:
page = erofs_allocpage(pagepool, gfp | __GFP_NOFAIL);
- if (oldpage != cmpxchg(&pcl->compressed_pages[nr], oldpage, page)) {
+ if (oldpage != cmpxchg(&pcl->compressed_bvecs[nr].page,
+ oldpage, page)) {
erofs_pagepool_add(pagepool, page);
cond_resched();
goto repeat;
q = fgq;
init_completion(&fgq->u.done);
atomic_set(&fgq->pending_bios, 0);
+ q->eio = false;
}
q->sb = sb;
q->head = Z_EROFS_PCLUSTER_TAIL_CLOSED;
DBG_BUGON(PageUptodate(page));
DBG_BUGON(z_erofs_page_is_invalidated(page));
- if (err)
- SetPageError(page);
-
if (erofs_page_is_managed(EROFS_SB(q->sb), page)) {
if (!err)
SetPageUptodate(page);
unlock_page(page);
}
}
+ if (err)
+ q->eio = true;
z_erofs_decompress_kickoff(q, tagptr_unfold_tags(t), -1);
bio_put(bio);
}
-static void z_erofs_submit_queue(struct super_block *sb,
- struct z_erofs_decompress_frontend *f,
+static void z_erofs_submit_queue(struct z_erofs_decompress_frontend *f,
struct page **pagepool,
struct z_erofs_decompressqueue *fgq,
bool *force_fg)
{
- struct erofs_sb_info *const sbi = EROFS_SB(sb);
+ struct super_block *sb = f->inode->i_sb;
+ struct address_space *mc = MNGD_MAPPING(EROFS_SB(sb));
z_erofs_next_pcluster_t qtail[NR_JOBQUEUES];
struct z_erofs_decompressqueue *q[NR_JOBQUEUES];
void *bi_private;
struct page *page;
page = pickup_page_for_submission(pcl, i++, pagepool,
- MNGD_MAPPING(sbi));
+ mc);
if (!page)
continue;
z_erofs_decompress_kickoff(q[JQ_SUBMIT], *force_fg, nr_bios);
}
-static void z_erofs_runqueue(struct super_block *sb,
- struct z_erofs_decompress_frontend *f,
+static void z_erofs_runqueue(struct z_erofs_decompress_frontend *f,
struct page **pagepool, bool force_fg)
{
struct z_erofs_decompressqueue io[NR_JOBQUEUES];
if (f->owned_head == Z_EROFS_PCLUSTER_TAIL)
return;
- z_erofs_submit_queue(sb, f, pagepool, io, &force_fg);
+ z_erofs_submit_queue(f, pagepool, io, &force_fg);
/* handle bypass queue (no i/o pclusters) immediately */
z_erofs_decompress_queue(&io[JQ_BYPASS], pagepool);
(void)z_erofs_collector_end(&f);
/* if some compressed cluster ready, need submit them anyway */
- z_erofs_runqueue(inode->i_sb, &f, &pagepool,
+ z_erofs_runqueue(&f, &pagepool,
z_erofs_get_sync_decompress_policy(sbi, 0));
if (err)
z_erofs_pcluster_readmore(&f, rac, 0, &pagepool, false);
(void)z_erofs_collector_end(&f);
- z_erofs_runqueue(inode->i_sb, &f, &pagepool,
+ z_erofs_runqueue(&f, &pagepool,
z_erofs_get_sync_decompress_policy(sbi, nr_pages));
erofs_put_metabuf(&f.map.buf);
erofs_release_pages(&pagepool);
#define __EROFS_FS_ZDATA_H
#include "internal.h"
-#include "zpvec.h"
+#include "tagptr.h"
#define Z_EROFS_PCLUSTER_MAX_PAGES (Z_EROFS_PCLUSTER_MAX_SIZE / PAGE_SIZE)
-#define Z_EROFS_NR_INLINE_PAGEVECS 3
-
-#define Z_EROFS_PCLUSTER_FULL_LENGTH 0x00000001
-#define Z_EROFS_PCLUSTER_LENGTH_BIT 1
+#define Z_EROFS_INLINE_BVECS 2
/*
* let's leave a type here in case of introducing
*/
typedef void *z_erofs_next_pcluster_t;
+struct z_erofs_bvec {
+ struct page *page;
+ int offset;
+ unsigned int end;
+};
+
+#define __Z_EROFS_BVSET(name, total) \
+struct name { \
+ /* point to the next page which contains the following bvecs */ \
+ struct page *nextpage; \
+ struct z_erofs_bvec bvec[total]; \
+}
+__Z_EROFS_BVSET(z_erofs_bvset,);
+__Z_EROFS_BVSET(z_erofs_bvset_inline, Z_EROFS_INLINE_BVECS);
+
/*
* Structure fields follow one of the following exclusion rules.
*
/* A: point to next chained pcluster or TAILs */
z_erofs_next_pcluster_t next;
- /* A: lower limit of decompressed length and if full length or not */
+ /* L: the maximum decompression size of this round */
unsigned int length;
+ /* L: total number of bvecs */
+ unsigned int vcnt;
+
/* I: page offset of start position of decompression */
unsigned short pageofs_out;
/* I: page offset of inline compressed data */
unsigned short pageofs_in;
- /* L: maximum relative page index in pagevec[] */
- unsigned short nr_pages;
-
- /* L: total number of pages in pagevec[] */
- unsigned int vcnt;
-
union {
- /* L: inline a certain number of pagevecs for bootstrap */
- erofs_vtptr_t pagevec[Z_EROFS_NR_INLINE_PAGEVECS];
+ /* L: inline a certain number of bvec for bootstrap */
+ struct z_erofs_bvset_inline bvset;
/* I: can be used to free the pcluster by RCU. */
struct rcu_head rcu;
/* I: compression algorithm format */
unsigned char algorithmformat;
- /* A: compressed pages (can be cached or inplaced pages) */
- struct page *compressed_pages[];
+ /* L: whether partial decompression or not */
+ bool partial;
+
+ /* L: indicate several pageofs_outs or not */
+ bool multibases;
+
+ /* A: compressed bvecs (can be cached or inplaced pages) */
+ struct z_erofs_bvec compressed_bvecs[];
};
/* let's avoid the valid 32-bit kernel addresses */
struct completion done;
struct work_struct work;
} u;
+
+ bool eio;
};
static inline bool z_erofs_is_inline_pcluster(struct z_erofs_pcluster *pcl)
return pcl->pclusterpages;
}
-#define Z_EROFS_ONLINEPAGE_COUNT_BITS 2
-#define Z_EROFS_ONLINEPAGE_COUNT_MASK ((1 << Z_EROFS_ONLINEPAGE_COUNT_BITS) - 1)
-#define Z_EROFS_ONLINEPAGE_INDEX_SHIFT (Z_EROFS_ONLINEPAGE_COUNT_BITS)
-
/*
- * waiters (aka. ongoing_packs): # to unlock the page
- * sub-index: 0 - for partial page, >= 1 full page sub-index
+ * bit 31: I/O error occurred on this page
+ * bit 0 - 30: remaining parts to complete this page
*/
-typedef atomic_t z_erofs_onlinepage_t;
-
-/* type punning */
-union z_erofs_onlinepage_converter {
- z_erofs_onlinepage_t *o;
- unsigned long *v;
-};
-
-static inline unsigned int z_erofs_onlinepage_index(struct page *page)
-{
- union z_erofs_onlinepage_converter u;
-
- DBG_BUGON(!PagePrivate(page));
- u.v = &page_private(page);
-
- return atomic_read(u.o) >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT;
-}
+#define Z_EROFS_PAGE_EIO (1 << 31)
static inline void z_erofs_onlinepage_init(struct page *page)
{
union {
- z_erofs_onlinepage_t o;
+ atomic_t o;
unsigned long v;
- /* keep from being unlocked in advance */
} u = { .o = ATOMIC_INIT(1) };
set_page_private(page, u.v);
SetPagePrivate(page);
}
-static inline void z_erofs_onlinepage_fixup(struct page *page,
- uintptr_t index, bool down)
+static inline void z_erofs_onlinepage_split(struct page *page)
{
- union z_erofs_onlinepage_converter u = { .v = &page_private(page) };
- int orig, orig_index, val;
-
-repeat:
- orig = atomic_read(u.o);
- orig_index = orig >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT;
- if (orig_index) {
- if (!index)
- return;
+ atomic_inc((atomic_t *)&page->private);
+}
- DBG_BUGON(orig_index != index);
- }
+static inline void z_erofs_page_mark_eio(struct page *page)
+{
+ int orig;
- val = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) |
- ((orig & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned int)down);
- if (atomic_cmpxchg(u.o, orig, val) != orig)
- goto repeat;
+ do {
+ orig = atomic_read((atomic_t *)&page->private);
+ } while (atomic_cmpxchg((atomic_t *)&page->private, orig,
+ orig | Z_EROFS_PAGE_EIO) != orig);
}
static inline void z_erofs_onlinepage_endio(struct page *page)
{
- union z_erofs_onlinepage_converter u;
unsigned int v;
DBG_BUGON(!PagePrivate(page));
- u.v = &page_private(page);
-
- v = atomic_dec_return(u.o);
- if (!(v & Z_EROFS_ONLINEPAGE_COUNT_MASK)) {
+ v = atomic_dec_return((atomic_t *)&page->private);
+ if (!(v & ~Z_EROFS_PAGE_EIO)) {
set_page_private(page, 0);
ClearPagePrivate(page);
- if (!PageError(page))
+ if (!(v & Z_EROFS_PAGE_EIO))
SetPageUptodate(page);
unlock_page(page);
}
- erofs_dbg("%s, page %p value %x", __func__, page, atomic_read(u.o));
}
-#define Z_EROFS_VMAP_ONSTACK_PAGES \
- min_t(unsigned int, THREAD_SIZE / 8 / sizeof(struct page *), 96U)
-#define Z_EROFS_VMAP_GLOBAL_PAGES 2048
+#define Z_EROFS_ONSTACK_PAGES 32
#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2018 HUAWEI, Inc.
- * https://www.huawei.com/
- */
-#ifndef __EROFS_FS_ZPVEC_H
-#define __EROFS_FS_ZPVEC_H
-
-#include "tagptr.h"
-
-/* page type in pagevec for decompress subsystem */
-enum z_erofs_page_type {
- /* including Z_EROFS_VLE_PAGE_TAIL_EXCLUSIVE */
- Z_EROFS_PAGE_TYPE_EXCLUSIVE,
-
- Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED,
-
- Z_EROFS_VLE_PAGE_TYPE_HEAD,
- Z_EROFS_VLE_PAGE_TYPE_MAX
-};
-
-extern void __compiletime_error("Z_EROFS_PAGE_TYPE_EXCLUSIVE != 0")
- __bad_page_type_exclusive(void);
-
-/* pagevec tagged pointer */
-typedef tagptr2_t erofs_vtptr_t;
-
-/* pagevec collector */
-struct z_erofs_pagevec_ctor {
- struct page *curr, *next;
- erofs_vtptr_t *pages;
-
- unsigned int nr, index;
-};
-
-static inline void z_erofs_pagevec_ctor_exit(struct z_erofs_pagevec_ctor *ctor,
- bool atomic)
-{
- if (!ctor->curr)
- return;
-
- if (atomic)
- kunmap_atomic(ctor->pages);
- else
- kunmap(ctor->curr);
-}
-
-static inline struct page *
-z_erofs_pagevec_ctor_next_page(struct z_erofs_pagevec_ctor *ctor,
- unsigned int nr)
-{
- unsigned int index;
-
- /* keep away from occupied pages */
- if (ctor->next)
- return ctor->next;
-
- for (index = 0; index < nr; ++index) {
- const erofs_vtptr_t t = ctor->pages[index];
- const unsigned int tags = tagptr_unfold_tags(t);
-
- if (tags == Z_EROFS_PAGE_TYPE_EXCLUSIVE)
- return tagptr_unfold_ptr(t);
- }
- DBG_BUGON(nr >= ctor->nr);
- return NULL;
-}
-
-static inline void
-z_erofs_pagevec_ctor_pagedown(struct z_erofs_pagevec_ctor *ctor,
- bool atomic)
-{
- struct page *next = z_erofs_pagevec_ctor_next_page(ctor, ctor->nr);
-
- z_erofs_pagevec_ctor_exit(ctor, atomic);
-
- ctor->curr = next;
- ctor->next = NULL;
- ctor->pages = atomic ?
- kmap_atomic(ctor->curr) : kmap(ctor->curr);
-
- ctor->nr = PAGE_SIZE / sizeof(struct page *);
- ctor->index = 0;
-}
-
-static inline void z_erofs_pagevec_ctor_init(struct z_erofs_pagevec_ctor *ctor,
- unsigned int nr,
- erofs_vtptr_t *pages,
- unsigned int i)
-{
- ctor->nr = nr;
- ctor->curr = ctor->next = NULL;
- ctor->pages = pages;
-
- if (i >= nr) {
- i -= nr;
- z_erofs_pagevec_ctor_pagedown(ctor, false);
- while (i > ctor->nr) {
- i -= ctor->nr;
- z_erofs_pagevec_ctor_pagedown(ctor, false);
- }
- }
- ctor->next = z_erofs_pagevec_ctor_next_page(ctor, i);
- ctor->index = i;
-}
-
-static inline bool z_erofs_pagevec_enqueue(struct z_erofs_pagevec_ctor *ctor,
- struct page *page,
- enum z_erofs_page_type type,
- bool pvec_safereuse)
-{
- if (!ctor->next) {
- /* some pages cannot be reused as pvec safely without I/O */
- if (type == Z_EROFS_PAGE_TYPE_EXCLUSIVE && !pvec_safereuse)
- type = Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED;
-
- if (type != Z_EROFS_PAGE_TYPE_EXCLUSIVE &&
- ctor->index + 1 == ctor->nr)
- return false;
- }
-
- if (ctor->index >= ctor->nr)
- z_erofs_pagevec_ctor_pagedown(ctor, false);
-
- /* exclusive page type must be 0 */
- if (Z_EROFS_PAGE_TYPE_EXCLUSIVE != (uintptr_t)NULL)
- __bad_page_type_exclusive();
-
- /* should remind that collector->next never equal to 1, 2 */
- if (type == (uintptr_t)ctor->next) {
- ctor->next = page;
- }
- ctor->pages[ctor->index++] = tagptr_fold(erofs_vtptr_t, page, type);
- return true;
-}
-
-static inline struct page *
-z_erofs_pagevec_dequeue(struct z_erofs_pagevec_ctor *ctor,
- enum z_erofs_page_type *type)
-{
- erofs_vtptr_t t;
-
- if (ctor->index >= ctor->nr) {
- DBG_BUGON(!ctor->next);
- z_erofs_pagevec_ctor_pagedown(ctor, true);
- }
-
- t = ctor->pages[ctor->index];
-
- *type = tagptr_unfold_tags(t);
-
- /* should remind that collector->next never equal to 1, 2 */
- if (*type == (uintptr_t)ctor->next)
- ctor->next = tagptr_unfold_ptr(t);
-
- ctor->pages[ctor->index++] = tagptr_fold(erofs_vtptr_t, NULL, 0);
- return tagptr_unfold_ptr(t);
-}
-#endif
if (error)
return error;
- if (is_quota_modification(inode, iattr)) {
+ if (is_quota_modification(mnt_userns, inode, iattr)) {
error = dquot_initialize(inode);
if (error)
return error;
}
- if ((iattr->ia_valid & ATTR_UID && !uid_eq(iattr->ia_uid, inode->i_uid)) ||
- (iattr->ia_valid & ATTR_GID && !gid_eq(iattr->ia_gid, inode->i_gid))) {
- error = dquot_transfer(inode, iattr);
+ if (i_uid_needs_update(mnt_userns, iattr, inode) ||
+ i_gid_needs_update(mnt_userns, iattr, inode)) {
+ error = dquot_transfer(mnt_userns, inode, iattr);
if (error)
return error;
}
sbi->s_frags_per_group);
goto failed_mount;
}
- if (sbi->s_inodes_per_group > sb->s_blocksize * 8) {
+ if (sbi->s_inodes_per_group < sbi->s_inodes_per_block ||
+ sbi->s_inodes_per_group > sb->s_blocksize * 8) {
ext2_msg(sb, KERN_ERR,
- "error: #inodes per group too big: %lu",
+ "error: invalid #inodes per group: %lu",
sbi->s_inodes_per_group);
goto failed_mount;
}
sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) - 1)
/ EXT2_BLOCKS_PER_GROUP(sb)) + 1;
+ if ((u64)sbi->s_groups_count * sbi->s_inodes_per_group !=
+ le32_to_cpu(es->s_inodes_count)) {
+ ext2_msg(sb, KERN_ERR, "error: invalid #inodes: %u vs computed %llu",
+ le32_to_cpu(es->s_inodes_count),
+ (u64)sbi->s_groups_count * sbi->s_inodes_per_group);
+ goto failed_mount;
+ }
db_count = (sbi->s_groups_count + EXT2_DESC_PER_BLOCK(sb) - 1) /
EXT2_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc_array(db_count,
len = i_size-off;
toread = len;
while (toread > 0) {
- tocopy = sb->s_blocksize - offset < toread ?
- sb->s_blocksize - offset : toread;
+ tocopy = min_t(size_t, sb->s_blocksize - offset, toread);
tmp_bh.b_state = 0;
tmp_bh.b_size = sb->s_blocksize;
struct buffer_head *bh;
while (towrite > 0) {
- tocopy = sb->s_blocksize - offset < towrite ?
- sb->s_blocksize - offset : towrite;
+ tocopy = min_t(size_t, sb->s_blocksize - offset, towrite);
tmp_bh.b_state = 0;
tmp_bh.b_size = sb->s_blocksize;
if (error)
return error;
- if (is_quota_modification(inode, attr)) {
+ if (is_quota_modification(mnt_userns, inode, attr)) {
error = dquot_initialize(inode);
if (error)
return error;
}
- if ((ia_valid & ATTR_UID && !uid_eq(attr->ia_uid, inode->i_uid)) ||
- (ia_valid & ATTR_GID && !gid_eq(attr->ia_gid, inode->i_gid))) {
+ if (i_uid_needs_update(mnt_userns, attr, inode) ||
+ i_gid_needs_update(mnt_userns, attr, inode)) {
handle_t *handle;
/* (user+group)*(old+new) structure, inode write (sb,
* counts xattr inode references.
*/
down_read(&EXT4_I(inode)->xattr_sem);
- error = dquot_transfer(inode, attr);
+ error = dquot_transfer(mnt_userns, inode, attr);
up_read(&EXT4_I(inode)->xattr_sem);
if (error) {
}
/* Update corresponding info in inode so that everything is in
* one transaction */
- if (attr->ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (attr->ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
+ i_uid_update(mnt_userns, attr, inode);
+ i_gid_update(mnt_userns, attr, inode);
error = ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
if (unlikely(error)) {
{
unsigned int ia_valid = attr->ia_valid;
- if (ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
+ i_uid_update(mnt_userns, attr, inode);
+ i_gid_update(mnt_userns, attr, inode);
if (ia_valid & ATTR_ATIME)
inode->i_atime = attr->ia_atime;
if (ia_valid & ATTR_MTIME)
if (err)
return err;
- if (is_quota_modification(inode, attr)) {
+ if (is_quota_modification(mnt_userns, inode, attr)) {
err = f2fs_dquot_initialize(inode);
if (err)
return err;
}
- if ((attr->ia_valid & ATTR_UID &&
- !uid_eq(attr->ia_uid, inode->i_uid)) ||
- (attr->ia_valid & ATTR_GID &&
- !gid_eq(attr->ia_gid, inode->i_gid))) {
+ if (i_uid_needs_update(mnt_userns, attr, inode) ||
+ i_gid_needs_update(mnt_userns, attr, inode)) {
f2fs_lock_op(F2FS_I_SB(inode));
- err = dquot_transfer(inode, attr);
+ err = dquot_transfer(mnt_userns, inode, attr);
if (err) {
set_sbi_flag(F2FS_I_SB(inode),
SBI_QUOTA_NEED_REPAIR);
* update uid/gid under lock_op(), so that dquot and inode can
* be updated atomically.
*/
- if (attr->ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (attr->ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
+ i_uid_update(mnt_userns, attr, inode);
+ i_gid_update(mnt_userns, attr, inode);
f2fs_mark_inode_dirty_sync(inode, true);
f2fs_unlock_op(F2FS_I_SB(inode));
}
memset(&attr, 0, sizeof(attr));
- attr.ia_uid = make_kuid(inode->i_sb->s_user_ns, i_uid);
- attr.ia_gid = make_kgid(inode->i_sb->s_user_ns, i_gid);
+ attr.ia_vfsuid = VFSUIDT_INIT(make_kuid(inode->i_sb->s_user_ns, i_uid));
+ attr.ia_vfsgid = VFSGIDT_INIT(make_kgid(inode->i_sb->s_user_ns, i_gid));
- if (!uid_eq(attr.ia_uid, inode->i_uid))
+ if (!vfsuid_eq(attr.ia_vfsuid, i_uid_into_vfsuid(&init_user_ns, inode)))
attr.ia_valid |= ATTR_UID;
- if (!gid_eq(attr.ia_gid, inode->i_gid))
+ if (!vfsgid_eq(attr.ia_vfsgid, i_gid_into_vfsgid(&init_user_ns, inode)))
attr.ia_valid |= ATTR_GID;
if (!attr.ia_valid)
return 0;
- err = dquot_transfer(inode, &attr);
+ err = dquot_transfer(&init_user_ns, inode, &attr);
if (err)
set_sbi_flag(F2FS_I_SB(inode), SBI_QUOTA_NEED_REPAIR);
return err;
* out the RO attribute for checking by the security
* module, just because it maps to a file mode.
*/
- err = security_inode_setattr(file->f_path.dentry, &ia);
+ err = security_inode_setattr(file_mnt_user_ns(file),
+ file->f_path.dentry, &ia);
if (err)
goto out_unlock_inode;
}
if (((attr->ia_valid & ATTR_UID) &&
- (!uid_eq(attr->ia_uid, sbi->options.fs_uid))) ||
+ (!uid_eq(from_vfsuid(mnt_userns, i_user_ns(inode), attr->ia_vfsuid),
+ sbi->options.fs_uid))) ||
((attr->ia_valid & ATTR_GID) &&
- (!gid_eq(attr->ia_gid, sbi->options.fs_gid))) ||
+ (!gid_eq(from_vfsgid(mnt_userns, i_user_ns(inode), attr->ia_vfsgid),
+ sbi->options.fs_gid))) ||
((attr->ia_valid & ATTR_MODE) &&
(attr->ia_mode & ~FAT_VALID_MODE)))
error = -EPERM;
if (rc)
return rc;
- if (is_quota_modification(inode, iattr)) {
+ if (is_quota_modification(mnt_userns, inode, iattr)) {
rc = dquot_initialize(inode);
if (rc)
return rc;
}
if ((iattr->ia_valid & ATTR_UID && !uid_eq(iattr->ia_uid, inode->i_uid)) ||
(iattr->ia_valid & ATTR_GID && !gid_eq(iattr->ia_gid, inode->i_gid))) {
- rc = dquot_transfer(inode, iattr);
+ rc = dquot_transfer(mnt_userns, inode, iattr);
if (rc)
return rc;
}
*/
int ksmbd_vfs_setxattr(struct user_namespace *user_ns,
struct dentry *dentry, const char *attr_name,
- const void *attr_value, size_t attr_size, int flags)
+ void *attr_value, size_t attr_size, int flags)
{
int err;
int attr_name_len);
int ksmbd_vfs_setxattr(struct user_namespace *user_ns,
struct dentry *dentry, const char *attr_name,
- const void *attr_value, size_t attr_size, int flags);
+ void *attr_value, size_t attr_size, int flags);
int ksmbd_vfs_xattr_stream_name(char *stream_name, char **xattr_stream_name,
size_t *xattr_stream_name_size, int s_type);
int ksmbd_vfs_remove_xattr(struct user_namespace *user_ns,
}
/* Fill in a file_lock structure with an appropriate FLOCK lock. */
-static struct file_lock *
-flock_make_lock(struct file *filp, unsigned int cmd, struct file_lock *fl)
+static void flock_make_lock(struct file *filp, struct file_lock *fl, int type)
{
- int type = flock_translate_cmd(cmd);
-
- if (type < 0)
- return ERR_PTR(type);
-
- if (fl == NULL) {
- fl = locks_alloc_lock();
- if (fl == NULL)
- return ERR_PTR(-ENOMEM);
- } else {
- locks_init_lock(fl);
- }
+ locks_init_lock(fl);
fl->fl_file = filp;
fl->fl_owner = filp;
fl->fl_flags = FL_FLOCK;
fl->fl_type = type;
fl->fl_end = OFFSET_MAX;
-
- return fl;
}
static int assign_type(struct file_lock *fl, long type)
*/
SYSCALL_DEFINE2(flock, unsigned int, fd, unsigned int, cmd)
{
- struct fd f = fdget(fd);
- struct file_lock *lock;
- int can_sleep, unlock;
- int error;
-
- error = -EBADF;
- if (!f.file)
- goto out;
-
- can_sleep = !(cmd & LOCK_NB);
- cmd &= ~LOCK_NB;
- unlock = (cmd == LOCK_UN);
-
- if (!unlock && !(f.file->f_mode & (FMODE_READ|FMODE_WRITE)))
- goto out_putf;
+ int can_sleep, error, type;
+ struct file_lock fl;
+ struct fd f;
/*
* LOCK_MAND locks were broken for a long time in that they never
*/
if (cmd & LOCK_MAND) {
pr_warn_once("Attempt to set a LOCK_MAND lock via flock(2). This support has been removed and the request ignored.\n");
- error = 0;
- goto out_putf;
+ return 0;
}
- lock = flock_make_lock(f.file, cmd, NULL);
- if (IS_ERR(lock)) {
- error = PTR_ERR(lock);
+ type = flock_translate_cmd(cmd & ~LOCK_NB);
+ if (type < 0)
+ return type;
+
+ error = -EBADF;
+ f = fdget(fd);
+ if (!f.file)
+ return error;
+
+ if (type != F_UNLCK && !(f.file->f_mode & (FMODE_READ | FMODE_WRITE)))
goto out_putf;
- }
- if (can_sleep)
- lock->fl_flags |= FL_SLEEP;
+ flock_make_lock(f.file, &fl, type);
- error = security_file_lock(f.file, lock->fl_type);
+ error = security_file_lock(f.file, fl.fl_type);
if (error)
- goto out_free;
+ goto out_putf;
+
+ can_sleep = !(cmd & LOCK_NB);
+ if (can_sleep)
+ fl.fl_flags |= FL_SLEEP;
if (f.file->f_op->flock)
error = f.file->f_op->flock(f.file,
- (can_sleep) ? F_SETLKW : F_SETLK,
- lock);
+ (can_sleep) ? F_SETLKW : F_SETLK,
+ &fl);
else
- error = locks_lock_file_wait(f.file, lock);
-
- out_free:
- locks_free_lock(lock);
+ error = locks_lock_file_wait(f.file, &fl);
out_putf:
fdput(f);
- out:
+
return error;
}
if (list_empty(&flctx->flc_flock))
return;
- flock_make_lock(filp, LOCK_UN, &fl);
+ flock_make_lock(filp, &fl, F_UNLCK);
fl.fl_flags |= FL_CLOSE;
if (filp->f_op->flock)
const void *data, int data_type,
struct inode *dir)
{
- __u32 marks_mask = 0, marks_ignored_mask = 0;
+ __u32 marks_mask = 0, marks_ignore_mask = 0;
__u32 test_mask, user_mask = FANOTIFY_OUTGOING_EVENTS |
FANOTIFY_EVENT_FLAGS;
const struct path *path = fsnotify_data_path(data, data_type);
unsigned int fid_mode = FAN_GROUP_FLAG(group, FANOTIFY_FID_BITS);
struct fsnotify_mark *mark;
+ bool ondir = event_mask & FAN_ONDIR;
int type;
pr_debug("%s: report_mask=%x mask=%x data=%p data_type=%d\n",
return 0;
} else if (!(fid_mode & FAN_REPORT_FID)) {
/* Do we have a directory inode to report? */
- if (!dir && !(event_mask & FS_ISDIR))
+ if (!dir && !ondir)
return 0;
}
fsnotify_foreach_iter_mark_type(iter_info, mark, type) {
- /* Apply ignore mask regardless of mark's ISDIR flag */
- marks_ignored_mask |= mark->ignored_mask;
+ /*
+ * Apply ignore mask depending on event flags in ignore mask.
+ */
+ marks_ignore_mask |=
+ fsnotify_effective_ignore_mask(mark, ondir, type);
/*
- * If the event is on dir and this mark doesn't care about
- * events on dir, don't send it!
+ * Send the event depending on event flags in mark mask.
*/
- if (event_mask & FS_ISDIR && !(mark->mask & FS_ISDIR))
+ if (!fsnotify_mask_applicable(mark->mask, ondir, type))
continue;
marks_mask |= mark->mask;
*match_mask |= 1U << type;
}
- test_mask = event_mask & marks_mask & ~marks_ignored_mask;
+ test_mask = event_mask & marks_mask & ~marks_ignore_mask;
/*
* For dirent modification events (create/delete/move) that do not carry
mflags |= FAN_MARK_IGNORED_SURV_MODIFY;
if (mark->flags & FSNOTIFY_MARK_FLAG_NO_IREF)
mflags |= FAN_MARK_EVICTABLE;
+ if (mark->flags & FSNOTIFY_MARK_FLAG_HAS_IGNORE_FLAGS)
+ mflags |= FAN_MARK_IGNORE;
return mflags;
}
mask &= ~umask;
spin_lock(&fsn_mark->lock);
oldmask = fsnotify_calc_mask(fsn_mark);
- if (!(flags & FAN_MARK_IGNORED_MASK)) {
+ if (!(flags & FANOTIFY_MARK_IGNORE_BITS)) {
fsn_mark->mask &= ~mask;
} else {
- fsn_mark->ignored_mask &= ~mask;
+ fsn_mark->ignore_mask &= ~mask;
}
newmask = fsnotify_calc_mask(fsn_mark);
/*
* changes to the mask.
* Destroy mark when only umask bits remain.
*/
- *destroy = !((fsn_mark->mask | fsn_mark->ignored_mask) & ~umask);
+ *destroy = !((fsn_mark->mask | fsn_mark->ignore_mask) & ~umask);
spin_unlock(&fsn_mark->lock);
return oldmask & ~newmask;
unsigned int fan_flags)
{
bool want_iref = !(fan_flags & FAN_MARK_EVICTABLE);
+ unsigned int ignore = fan_flags & FANOTIFY_MARK_IGNORE_BITS;
bool recalc = false;
+ /*
+ * When using FAN_MARK_IGNORE for the first time, mark starts using
+ * independent event flags in ignore mask. After that, trying to
+ * update the ignore mask with the old FAN_MARK_IGNORED_MASK API
+ * will result in EEXIST error.
+ */
+ if (ignore == FAN_MARK_IGNORE)
+ fsn_mark->flags |= FSNOTIFY_MARK_FLAG_HAS_IGNORE_FLAGS;
+
/*
* Setting FAN_MARK_IGNORED_SURV_MODIFY for the first time may lead to
* the removal of the FS_MODIFY bit in calculated mask if it was set
- * because of an ignored mask that is now going to survive FS_MODIFY.
+ * because of an ignore mask that is now going to survive FS_MODIFY.
*/
- if ((fan_flags & FAN_MARK_IGNORED_MASK) &&
- (fan_flags & FAN_MARK_IGNORED_SURV_MODIFY) &&
+ if (ignore && (fan_flags & FAN_MARK_IGNORED_SURV_MODIFY) &&
!(fsn_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY)) {
fsn_mark->flags |= FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY;
if (!(fsn_mark->mask & FS_MODIFY))
bool recalc;
spin_lock(&fsn_mark->lock);
- if (!(fan_flags & FAN_MARK_IGNORED_MASK))
+ if (!(fan_flags & FANOTIFY_MARK_IGNORE_BITS))
fsn_mark->mask |= mask;
else
- fsn_mark->ignored_mask |= mask;
+ fsn_mark->ignore_mask |= mask;
recalc = fsnotify_calc_mask(fsn_mark) &
~fsnotify_conn_mask(fsn_mark->connector);
sizeof(struct fanotify_error_event));
}
+static int fanotify_may_update_existing_mark(struct fsnotify_mark *fsn_mark,
+ unsigned int fan_flags)
+{
+ /*
+ * Non evictable mark cannot be downgraded to evictable mark.
+ */
+ if (fan_flags & FAN_MARK_EVICTABLE &&
+ !(fsn_mark->flags & FSNOTIFY_MARK_FLAG_NO_IREF))
+ return -EEXIST;
+
+ /*
+ * New ignore mask semantics cannot be downgraded to old semantics.
+ */
+ if (fan_flags & FAN_MARK_IGNORED_MASK &&
+ fsn_mark->flags & FSNOTIFY_MARK_FLAG_HAS_IGNORE_FLAGS)
+ return -EEXIST;
+
+ /*
+ * An ignore mask that survives modify could never be downgraded to not
+ * survive modify. With new FAN_MARK_IGNORE semantics we make that rule
+ * explicit and return an error when trying to update the ignore mask
+ * without the original FAN_MARK_IGNORED_SURV_MODIFY value.
+ */
+ if (fan_flags & FAN_MARK_IGNORE &&
+ !(fan_flags & FAN_MARK_IGNORED_SURV_MODIFY) &&
+ fsn_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY)
+ return -EEXIST;
+
+ return 0;
+}
+
static int fanotify_add_mark(struct fsnotify_group *group,
fsnotify_connp_t *connp, unsigned int obj_type,
__u32 mask, unsigned int fan_flags,
}
/*
- * Non evictable mark cannot be downgraded to evictable mark.
+ * Check if requested mark flags conflict with an existing mark flags.
*/
- if (fan_flags & FAN_MARK_EVICTABLE &&
- !(fsn_mark->flags & FSNOTIFY_MARK_FLAG_NO_IREF)) {
- ret = -EEXIST;
+ ret = fanotify_may_update_existing_mark(fsn_mark, fan_flags);
+ if (ret)
goto out;
- }
/*
* Error events are pre-allocated per group, only if strictly
* needed (i.e. FAN_FS_ERROR was requested).
*/
- if (!(fan_flags & FAN_MARK_IGNORED_MASK) && (mask & FAN_FS_ERROR)) {
+ if (!(fan_flags & FANOTIFY_MARK_IGNORE_BITS) &&
+ (mask & FAN_FS_ERROR)) {
ret = fanotify_group_init_error_pool(group);
if (ret)
goto out;
/*
* If some other task has this inode open for write we should not add
- * an ignored mark, unless that ignored mark is supposed to survive
+ * an ignore mask, unless that ignore mask is supposed to survive
* modification changes anyway.
*/
- if ((flags & FAN_MARK_IGNORED_MASK) &&
+ if ((flags & FANOTIFY_MARK_IGNORE_BITS) &&
!(flags & FAN_MARK_IGNORED_SURV_MODIFY) &&
inode_is_open_for_write(inode))
return 0;
unsigned int mark_type = flags & FANOTIFY_MARK_TYPE_BITS;
/* Strict validation of events in non-dir inode mask with v5.17+ APIs */
bool strict_dir_events = FAN_GROUP_FLAG(group, FAN_REPORT_TARGET_FID) ||
- (mask & FAN_RENAME);
+ (mask & FAN_RENAME) ||
+ (flags & FAN_MARK_IGNORE);
/*
* Some filesystems such as 'proc' acquire unusual locks when opening
__kernel_fsid_t __fsid, *fsid = NULL;
u32 valid_mask = FANOTIFY_EVENTS | FANOTIFY_EVENT_FLAGS;
unsigned int mark_type = flags & FANOTIFY_MARK_TYPE_BITS;
- bool ignored = flags & FAN_MARK_IGNORED_MASK;
+ unsigned int mark_cmd = flags & FANOTIFY_MARK_CMD_BITS;
+ unsigned int ignore = flags & FANOTIFY_MARK_IGNORE_BITS;
unsigned int obj_type, fid_mode;
u32 umask = 0;
int ret;
return -EINVAL;
}
- switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
+ switch (mark_cmd) {
case FAN_MARK_ADD:
case FAN_MARK_REMOVE:
if (!mask)
if (mask & ~valid_mask)
return -EINVAL;
- /* Event flags (ONDIR, ON_CHILD) are meaningless in ignored mask */
- if (ignored)
+
+ /* We don't allow FAN_MARK_IGNORE & FAN_MARK_IGNORED_MASK together */
+ if (ignore == (FAN_MARK_IGNORE | FAN_MARK_IGNORED_MASK))
+ return -EINVAL;
+
+ /*
+ * Event flags (FAN_ONDIR, FAN_EVENT_ON_CHILD) have no effect with
+ * FAN_MARK_IGNORED_MASK.
+ */
+ if (ignore == FAN_MARK_IGNORED_MASK) {
mask &= ~FANOTIFY_EVENT_FLAGS;
+ umask = FANOTIFY_EVENT_FLAGS;
+ }
f = fdget(fanotify_fd);
if (unlikely(!f.file))
if (mask & FAN_RENAME && !(fid_mode & FAN_REPORT_NAME))
goto fput_and_out;
- if (flags & FAN_MARK_FLUSH) {
+ if (mark_cmd == FAN_MARK_FLUSH) {
ret = 0;
if (mark_type == FAN_MARK_MOUNT)
fsnotify_clear_vfsmount_marks_by_group(group);
if (ret)
goto fput_and_out;
- if (flags & FAN_MARK_ADD) {
+ if (mark_cmd == FAN_MARK_ADD) {
ret = fanotify_events_supported(group, &path, mask, flags);
if (ret)
goto path_put_and_out;
else
mnt = path.mnt;
+ ret = mnt ? -EINVAL : -EISDIR;
+ /* FAN_MARK_IGNORE requires SURV_MODIFY for sb/mount/dir marks */
+ if (mark_cmd == FAN_MARK_ADD && ignore == FAN_MARK_IGNORE &&
+ (mnt || S_ISDIR(inode->i_mode)) &&
+ !(flags & FAN_MARK_IGNORED_SURV_MODIFY))
+ goto path_put_and_out;
+
/* Mask out FAN_EVENT_ON_CHILD flag for sb/mount/non-dir marks */
if (mnt || !S_ISDIR(inode->i_mode)) {
mask &= ~FAN_EVENT_ON_CHILD;
* events with parent/name info for non-directory.
*/
if ((fid_mode & FAN_REPORT_DIR_FID) &&
- (flags & FAN_MARK_ADD) && !ignored)
+ (flags & FAN_MARK_ADD) && !ignore)
mask |= FAN_EVENT_ON_CHILD;
}
/* create/update an inode mark */
- switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
+ switch (mark_cmd) {
case FAN_MARK_ADD:
if (mark_type == FAN_MARK_MOUNT)
ret = fanotify_add_vfsmount_mark(group, mnt, mask,
BUILD_BUG_ON(FANOTIFY_INIT_FLAGS & FANOTIFY_INTERNAL_GROUP_FLAGS);
BUILD_BUG_ON(HWEIGHT32(FANOTIFY_INIT_FLAGS) != 12);
- BUILD_BUG_ON(HWEIGHT32(FANOTIFY_MARK_FLAGS) != 10);
+ BUILD_BUG_ON(HWEIGHT32(FANOTIFY_MARK_FLAGS) != 11);
fanotify_mark_cache = KMEM_CACHE(fsnotify_mark,
SLAB_PANIC|SLAB_ACCOUNT);
return;
seq_printf(m, "fanotify ino:%lx sdev:%x mflags:%x mask:%x ignored_mask:%x ",
inode->i_ino, inode->i_sb->s_dev,
- mflags, mark->mask, mark->ignored_mask);
+ mflags, mark->mask, mark->ignore_mask);
show_mark_fhandle(m, inode);
seq_putc(m, '\n');
iput(inode);
struct mount *mnt = fsnotify_conn_mount(mark->connector);
seq_printf(m, "fanotify mnt_id:%x mflags:%x mask:%x ignored_mask:%x\n",
- mnt->mnt_id, mflags, mark->mask, mark->ignored_mask);
+ mnt->mnt_id, mflags, mark->mask, mark->ignore_mask);
} else if (mark->connector->type == FSNOTIFY_OBJ_TYPE_SB) {
struct super_block *sb = fsnotify_conn_sb(mark->connector);
seq_printf(m, "fanotify sdev:%x mflags:%x mask:%x ignored_mask:%x\n",
- sb->s_dev, mflags, mark->mask, mark->ignored_mask);
+ sb->s_dev, mflags, mark->mask, mark->ignore_mask);
}
}
* Given an inode, first check if we care what happens to our children. Inotify
* and dnotify both tell their parents about events. If we care about any event
* on a child we run all of our children and set a dentry flag saying that the
- * parent cares. Thus when an event happens on a child it can quickly tell if
+ * parent cares. Thus when an event happens on a child it can quickly tell
* if there is a need to find a parent and send the event to the parent.
*/
void __fsnotify_update_child_dentry_flags(struct inode *inode)
struct fsnotify_group *group = NULL;
__u32 test_mask = (mask & ALL_FSNOTIFY_EVENTS);
__u32 marks_mask = 0;
- __u32 marks_ignored_mask = 0;
+ __u32 marks_ignore_mask = 0;
+ bool is_dir = mask & FS_ISDIR;
struct fsnotify_mark *mark;
int type;
fsnotify_foreach_iter_mark_type(iter_info, mark, type) {
if (!(mark->flags &
FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
+ mark->ignore_mask = 0;
}
}
fsnotify_foreach_iter_mark_type(iter_info, mark, type) {
group = mark->group;
marks_mask |= mark->mask;
- marks_ignored_mask |= mark->ignored_mask;
+ marks_ignore_mask |=
+ fsnotify_effective_ignore_mask(mark, is_dir, type);
}
- pr_debug("%s: group=%p mask=%x marks_mask=%x marks_ignored_mask=%x data=%p data_type=%d dir=%p cookie=%d\n",
- __func__, group, mask, marks_mask, marks_ignored_mask,
+ pr_debug("%s: group=%p mask=%x marks_mask=%x marks_ignore_mask=%x data=%p data_type=%d dir=%p cookie=%d\n",
+ __func__, group, mask, marks_mask, marks_ignore_mask,
data, data_type, dir, cookie);
- if (!(test_mask & marks_mask & ~marks_ignored_mask))
+ if (!(test_mask & marks_mask & ~marks_ignore_mask))
return 0;
if (group->ops->handle_event) {
* But is *this mark* watching children?
*/
if (type == FSNOTIFY_ITER_TYPE_PARENT &&
- !(mark->mask & FS_EVENT_ON_CHILD))
+ !(mark->mask & FS_EVENT_ON_CHILD) &&
+ !(fsnotify_ignore_mask(mark) & FS_EVENT_ON_CHILD))
continue;
fsnotify_iter_set_report_type(iter_info, type);
/*
- * If this is a modify event we may need to clear some ignored masks.
- * In that case, the object with ignored masks will have the FS_MODIFY
+ * If this is a modify event we may need to clear some ignore masks.
+ * In that case, the object with ignore masks will have the FS_MODIFY
* event in its mask.
* Otherwise, return if none of the marks care about this type of event.
*/
IN_Q_OVERFLOW);
}
-/* intofiy userspace file descriptor functions */
+/* inotify userspace file descriptor functions */
static __poll_t inotify_poll(struct file *file, poll_table *wait)
{
struct fsnotify_group *group = file->private_data;
a = (ATTR_RECORD*)((u8*)ctx->attr +
le32_to_cpu(ctx->attr->length));
for (;; a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))) {
- if ((u8*)a < (u8*)ctx->mrec || (u8*)a > (u8*)ctx->mrec +
- le32_to_cpu(ctx->mrec->bytes_allocated))
+ u8 *mrec_end = (u8 *)ctx->mrec +
+ le32_to_cpu(ctx->mrec->bytes_allocated);
+ u8 *name_end = (u8 *)a + le16_to_cpu(a->name_offset) +
+ a->name_length * sizeof(ntfschar);
+ if ((u8*)a < (u8*)ctx->mrec || (u8*)a > mrec_end ||
+ name_end > mrec_end)
break;
ctx->attr = a;
if (unlikely(le32_to_cpu(a->type) > le32_to_cpu(type) ||
if (status)
return status;
- if (is_quota_modification(inode, attr)) {
+ if (is_quota_modification(mnt_userns, inode, attr)) {
status = dquot_initialize(inode);
if (status)
return status;
OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT = 1 << 15, /* Journal Async Commit */
OCFS2_MOUNT_ERRORS_CONT = 1 << 16, /* Return EIO to the calling process on error */
OCFS2_MOUNT_ERRORS_ROFS = 1 << 17, /* Change filesystem to read-only on error */
- OCFS2_MOUNT_NOCLUSTER = 1 << 18, /* No cluster aware filesystem mount */
};
#define OCFS2_OSB_SOFT_RO 0x0001
static inline int ocfs2_mount_local(struct ocfs2_super *osb)
{
- return ((osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT)
- || (osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER));
+ return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
}
static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb)
int i, ret = -ENOSPC;
if ((preferred >= 0) && (preferred < si->si_num_slots)) {
- if (!si->si_slots[preferred].sl_valid ||
- !si->si_slots[preferred].sl_node_num) {
+ if (!si->si_slots[preferred].sl_valid) {
ret = preferred;
goto out;
}
}
for(i = 0; i < si->si_num_slots; i++) {
- if (!si->si_slots[i].sl_valid ||
- !si->si_slots[i].sl_node_num) {
+ if (!si->si_slots[i].sl_valid) {
ret = i;
break;
}
spin_lock(&osb->osb_lock);
ocfs2_update_slot_info(si);
- if (ocfs2_mount_local(osb))
- /* use slot 0 directly in local mode */
- slot = 0;
- else {
- /* search for ourselves first and take the slot if it already
- * exists. Perhaps we need to mark this in a variable for our
- * own journal recovery? Possibly not, though we certainly
- * need to warn to the user */
- slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+ /* search for ourselves first and take the slot if it already
+ * exists. Perhaps we need to mark this in a variable for our
+ * own journal recovery? Possibly not, though we certainly
+ * need to warn to the user */
+ slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+ if (slot < 0) {
+ /* if no slot yet, then just take 1st available
+ * one. */
+ slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
if (slot < 0) {
- /* if no slot yet, then just take 1st available
- * one. */
- slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
- if (slot < 0) {
- spin_unlock(&osb->osb_lock);
- mlog(ML_ERROR, "no free slots available!\n");
- status = -EINVAL;
- goto bail;
- }
- } else
- printk(KERN_INFO "ocfs2: Slot %d on device (%s) was "
- "already allocated to this node!\n",
- slot, osb->dev_str);
- }
+ spin_unlock(&osb->osb_lock);
+ mlog(ML_ERROR, "no free slots available!\n");
+ status = -EINVAL;
+ goto bail;
+ }
+ } else
+ printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
+ "allocated to this node!\n", slot, osb->dev_str);
ocfs2_set_slot(si, slot, osb->node_num);
osb->slot_num = slot;
Opt_dir_resv_level,
Opt_journal_async_commit,
Opt_err_cont,
- Opt_nocluster,
Opt_err,
};
{Opt_dir_resv_level, "dir_resv_level=%u"},
{Opt_journal_async_commit, "journal_async_commit"},
{Opt_err_cont, "errors=continue"},
- {Opt_nocluster, "nocluster"},
{Opt_err, NULL}
};
goto out;
}
- tmp = OCFS2_MOUNT_NOCLUSTER;
- if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
- ret = -EINVAL;
- mlog(ML_ERROR, "Cannot change nocluster option on remount\n");
- goto out;
- }
-
tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
OCFS2_MOUNT_HB_NONE;
if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
}
if (ocfs2_userspace_stack(osb) &&
- !(osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
strncmp(osb->osb_cluster_stack, mopt->cluster_stack,
OCFS2_STACK_LABEL_LEN)) {
mlog(ML_ERROR,
osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
"ordered");
- if ((osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
- !(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT))
- printk(KERN_NOTICE "ocfs2: The shared device (%s) is mounted "
- "without cluster aware mode.\n", osb->dev_str);
-
atomic_set(&osb->vol_state, VOLUME_MOUNTED);
wake_up(&osb->osb_mount_event);
case Opt_journal_async_commit:
mopt->mount_opt |= OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT;
break;
- case Opt_nocluster:
- mopt->mount_opt |= OCFS2_MOUNT_NOCLUSTER;
- break;
default:
mlog(ML_ERROR,
"Unrecognized mount option \"%s\" "
if (opts & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
seq_printf(s, ",journal_async_commit");
- if (opts & OCFS2_MOUNT_NOCLUSTER)
- seq_printf(s, ",nocluster");
-
return 0;
}
return do_fchmodat(AT_FDCWD, filename, mode);
}
+/**
+ * setattr_vfsuid - check and set ia_fsuid attribute
+ * @kuid: new inode owner
+ *
+ * Check whether @kuid is valid and if so generate and set vfsuid_t in
+ * ia_vfsuid.
+ *
+ * Return: true if @kuid is valid, false if not.
+ */
+static inline bool setattr_vfsuid(struct iattr *attr, kuid_t kuid)
+{
+ if (!uid_valid(kuid))
+ return false;
+ attr->ia_valid |= ATTR_UID;
+ attr->ia_vfsuid = VFSUIDT_INIT(kuid);
+ return true;
+}
+
+/**
+ * setattr_vfsgid - check and set ia_fsgid attribute
+ * @kgid: new inode owner
+ *
+ * Check whether @kgid is valid and if so generate and set vfsgid_t in
+ * ia_vfsgid.
+ *
+ * Return: true if @kgid is valid, false if not.
+ */
+static inline bool setattr_vfsgid(struct iattr *attr, kgid_t kgid)
+{
+ if (!gid_valid(kgid))
+ return false;
+ attr->ia_valid |= ATTR_GID;
+ attr->ia_vfsgid = VFSGIDT_INIT(kgid);
+ return true;
+}
+
int chown_common(const struct path *path, uid_t user, gid_t group)
{
struct user_namespace *mnt_userns, *fs_userns;
mnt_userns = mnt_user_ns(path->mnt);
fs_userns = i_user_ns(inode);
- uid = mapped_kuid_user(mnt_userns, fs_userns, uid);
- gid = mapped_kgid_user(mnt_userns, fs_userns, gid);
retry_deleg:
newattrs.ia_valid = ATTR_CTIME;
- if (user != (uid_t) -1) {
- if (!uid_valid(uid))
- return -EINVAL;
- newattrs.ia_valid |= ATTR_UID;
- newattrs.ia_uid = uid;
- }
- if (group != (gid_t) -1) {
- if (!gid_valid(gid))
- return -EINVAL;
- newattrs.ia_valid |= ATTR_GID;
- newattrs.ia_gid = gid;
- }
+ if ((user != (uid_t)-1) && !setattr_vfsuid(&newattrs, uid))
+ return -EINVAL;
+ if ((group != (gid_t)-1) && !setattr_vfsgid(&newattrs, gid))
+ return -EINVAL;
if (!S_ISDIR(inode->i_mode))
newattrs.ia_valid |=
ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_KILL_PRIV;
inode_lock(inode);
- error = security_path_chown(path, uid, gid);
+ /* Continue to send actual fs values, not the mount values. */
+ error = security_path_chown(
+ path,
+ from_vfsuid(mnt_userns, fs_userns, newattrs.ia_vfsuid),
+ from_vfsgid(mnt_userns, fs_userns, newattrs.ia_vfsgid));
if (!error)
error = notify_change(mnt_userns, path->dentry, &newattrs,
&delegated_inode);
if (!err) {
struct iattr attr = {
.ia_valid = ATTR_UID | ATTR_GID,
- .ia_uid = stat->uid,
- .ia_gid = stat->gid,
+ .ia_vfsuid = VFSUIDT_INIT(stat->uid),
+ .ia_vfsgid = VFSGIDT_INIT(stat->gid),
};
err = ovl_do_notify_change(ofs, upperdentry, &attr);
}
return res;
}
+/*
+ * Apply the idmapping of the layer to POSIX ACLs. The caller must pass a clone
+ * of the POSIX ACLs retrieved from the lower layer to this function to not
+ * alter the POSIX ACLs for the underlying filesystem.
+ */
+static void ovl_idmap_posix_acl(struct user_namespace *mnt_userns,
+ struct posix_acl *acl)
+{
+ for (unsigned int i = 0; i < acl->a_count; i++) {
+ vfsuid_t vfsuid;
+ vfsgid_t vfsgid;
+
+ struct posix_acl_entry *e = &acl->a_entries[i];
+ switch (e->e_tag) {
+ case ACL_USER:
+ vfsuid = make_vfsuid(mnt_userns, &init_user_ns, e->e_uid);
+ e->e_uid = vfsuid_into_kuid(vfsuid);
+ break;
+ case ACL_GROUP:
+ vfsgid = make_vfsgid(mnt_userns, &init_user_ns, e->e_gid);
+ e->e_gid = vfsgid_into_kgid(vfsgid);
+ break;
+ }
+ }
+}
+
+/*
+ * When the relevant layer is an idmapped mount we need to take the idmapping
+ * of the layer into account and translate any ACL_{GROUP,USER} values
+ * according to the idmapped mount.
+ *
+ * We cannot alter the ACLs returned from the relevant layer as that would
+ * alter the cached values filesystem wide for the lower filesystem. Instead we
+ * can clone the ACLs and then apply the relevant idmapping of the layer.
+ *
+ * This is obviously only relevant when idmapped layers are used.
+ */
struct posix_acl *ovl_get_acl(struct inode *inode, int type, bool rcu)
{
struct inode *realinode = ovl_inode_real(inode);
- const struct cred *old_cred;
- struct posix_acl *acl;
+ struct posix_acl *acl, *clone;
+ struct path realpath;
if (!IS_ENABLED(CONFIG_FS_POSIX_ACL) || !IS_POSIXACL(realinode))
return NULL;
- if (rcu)
- return get_cached_acl_rcu(realinode, type);
+ /* Careful in RCU walk mode */
+ ovl_i_path_real(inode, &realpath);
+ if (!realpath.dentry) {
+ WARN_ON(!rcu);
+ return ERR_PTR(-ECHILD);
+ }
- old_cred = ovl_override_creds(inode->i_sb);
- acl = get_acl(realinode, type);
- revert_creds(old_cred);
+ if (rcu) {
+ acl = get_cached_acl_rcu(realinode, type);
+ } else {
+ const struct cred *old_cred;
+
+ old_cred = ovl_override_creds(inode->i_sb);
+ acl = get_acl(realinode, type);
+ revert_creds(old_cred);
+ }
+ /*
+ * If there are no POSIX ACLs, or we encountered an error,
+ * or the layer isn't idmapped we don't need to do anything.
+ */
+ if (!is_idmapped_mnt(realpath.mnt) || IS_ERR_OR_NULL(acl))
+ return acl;
- return acl;
+ /*
+ * We only get here if the layer is idmapped. So drop out of RCU path
+ * walk so we can clone the ACLs. There's no need to release the ACLs
+ * since get_cached_acl_rcu() doesn't take a reference on the ACLs.
+ */
+ if (rcu)
+ return ERR_PTR(-ECHILD);
+
+ clone = posix_acl_clone(acl, GFP_KERNEL);
+ if (!clone)
+ clone = ERR_PTR(-ENOMEM);
+ else
+ ovl_idmap_posix_acl(mnt_user_ns(realpath.mnt), clone);
+ /*
+ * Since we're not in RCU path walk we always need to release the
+ * original ACLs.
+ */
+ posix_acl_release(acl);
+ return clone;
}
int ovl_update_time(struct inode *inode, struct timespec64 *ts, int flags)
struct dentry *upperdentry,
struct iattr *attr)
{
- struct user_namespace *upper_mnt_userns = ovl_upper_mnt_userns(ofs);
- struct user_namespace *fs_userns = i_user_ns(d_inode(upperdentry));
-
- if (attr->ia_valid & ATTR_UID)
- attr->ia_uid = mapped_kuid_user(upper_mnt_userns,
- fs_userns, attr->ia_uid);
- if (attr->ia_valid & ATTR_GID)
- attr->ia_gid = mapped_kgid_user(upper_mnt_userns,
- fs_userns, attr->ia_gid);
-
- return notify_change(upper_mnt_userns, upperdentry, attr, NULL);
+ return notify_change(ovl_upper_mnt_userns(ofs), upperdentry, attr, NULL);
}
static inline int ovl_do_rmdir(struct ovl_fs *ofs,
const char *name, const void *value,
size_t size, int flags)
{
- int err = vfs_setxattr(ovl_upper_mnt_userns(ofs), dentry, name, value, size, flags);
+ int err = vfs_setxattr(ovl_upper_mnt_userns(ofs), dentry, name,
+ (void *)value, size, flags);
pr_debug("setxattr(%pd2, \"%s\", \"%*pE\", %zu, %d) = %i\n",
dentry, name, min((int)size, 48), value, size, flags, err);
struct dentry *dentry, struct inode *inode,
const char *name, void *buffer, size_t size)
{
- if (!IS_POSIXACL(inode))
- return -EOPNOTSUPP;
-
return ovl_xattr_get(dentry, inode, handler->name, buffer, size);
}
struct posix_acl *acl = NULL;
int err;
- if (!IS_POSIXACL(inode))
- return -EOPNOTSUPP;
-
/* Check that everything is OK before copy-up */
if (value) {
acl = posix_acl_from_xattr(&init_user_ns, value, size);
return root;
}
-static bool ovl_has_idmapped_layers(struct ovl_fs *ofs)
-{
-
- unsigned int i;
- const struct vfsmount *mnt;
-
- for (i = 0; i < ofs->numlayer; i++) {
- mnt = ofs->layers[i].mnt;
- if (mnt && is_idmapped_mnt(mnt))
- return true;
- }
- return false;
-}
-
static int ovl_fill_super(struct super_block *sb, void *data, int silent)
{
struct path upperpath = { };
sb->s_xattr = ofs->config.userxattr ? ovl_user_xattr_handlers :
ovl_trusted_xattr_handlers;
sb->s_fs_info = ofs;
- if (ovl_has_idmapped_layers(ofs))
- pr_warn("POSIX ACLs are not yet supported with idmapped layers, mounting without ACL support.\n");
- else
- sb->s_flags |= SB_POSIXACL;
+ sb->s_flags |= SB_POSIXACL;
sb->s_iflags |= SB_I_SKIP_SYNC;
err = -ENOMEM;
/*
* Clone an ACL.
*/
-static struct posix_acl *
+struct posix_acl *
posix_acl_clone(const struct posix_acl *acl, gfp_t flags)
{
struct posix_acl *clone = NULL;
}
return clone;
}
+EXPORT_SYMBOL_GPL(posix_acl_clone);
/*
* Check if an acl is valid. Returns 0 if it is, or -E... otherwise.
{
const struct posix_acl_entry *pa, *pe, *mask_obj;
int found = 0;
- kuid_t uid;
- kgid_t gid;
+ vfsuid_t vfsuid;
+ vfsgid_t vfsgid;
want &= MAY_READ | MAY_WRITE | MAY_EXEC;
switch(pa->e_tag) {
case ACL_USER_OBJ:
/* (May have been checked already) */
- uid = i_uid_into_mnt(mnt_userns, inode);
- if (uid_eq(uid, current_fsuid()))
+ vfsuid = i_uid_into_vfsuid(mnt_userns, inode);
+ if (vfsuid_eq_kuid(vfsuid, current_fsuid()))
goto check_perm;
break;
case ACL_USER:
- uid = mapped_kuid_fs(mnt_userns,
- i_user_ns(inode),
+ vfsuid = make_vfsuid(mnt_userns, &init_user_ns,
pa->e_uid);
- if (uid_eq(uid, current_fsuid()))
+ if (vfsuid_eq_kuid(vfsuid, current_fsuid()))
goto mask;
break;
case ACL_GROUP_OBJ:
- gid = i_gid_into_mnt(mnt_userns, inode);
- if (in_group_p(gid)) {
+ vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
+ if (vfsgid_in_group_p(vfsgid)) {
found = 1;
if ((pa->e_perm & want) == want)
goto mask;
}
break;
case ACL_GROUP:
- gid = mapped_kgid_fs(mnt_userns,
- i_user_ns(inode),
+ vfsgid = make_vfsgid(mnt_userns, &init_user_ns,
pa->e_gid);
- if (in_group_p(gid)) {
+ if (vfsgid_in_group_p(vfsgid)) {
found = 1;
if ((pa->e_perm & want) == want)
goto mask;
return error;
if (error == 0)
*acl = NULL;
- if (!in_group_p(i_gid_into_mnt(mnt_userns, inode)) &&
+ if (!vfsgid_in_group_p(i_gid_into_vfsgid(mnt_userns, inode)) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
*mode_p = mode;
/*
* Fix up the uids and gids in posix acl extended attributes in place.
*/
-static void posix_acl_fix_xattr_userns(
- struct user_namespace *to, struct user_namespace *from,
- struct user_namespace *mnt_userns,
- void *value, size_t size, bool from_user)
+static int posix_acl_fix_xattr_common(void *value, size_t size)
+{
+ struct posix_acl_xattr_header *header = value;
+ int count;
+
+ if (!header)
+ return -EINVAL;
+ if (size < sizeof(struct posix_acl_xattr_header))
+ return -EINVAL;
+ if (header->a_version != cpu_to_le32(POSIX_ACL_XATTR_VERSION))
+ return -EINVAL;
+
+ count = posix_acl_xattr_count(size);
+ if (count < 0)
+ return -EINVAL;
+ if (count == 0)
+ return -EINVAL;
+
+ return count;
+}
+
+void posix_acl_getxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode,
+ void *value, size_t size)
{
struct posix_acl_xattr_header *header = value;
struct posix_acl_xattr_entry *entry = (void *)(header + 1), *end;
int count;
+ vfsuid_t vfsuid;
+ vfsgid_t vfsgid;
kuid_t uid;
kgid_t gid;
- if (!value)
+ if (no_idmapping(mnt_userns, i_user_ns(inode)))
return;
- if (size < sizeof(struct posix_acl_xattr_header))
+
+ count = posix_acl_fix_xattr_common(value, size);
+ if (count < 0)
return;
- if (header->a_version != cpu_to_le32(POSIX_ACL_XATTR_VERSION))
+
+ for (end = entry + count; entry != end; entry++) {
+ switch (le16_to_cpu(entry->e_tag)) {
+ case ACL_USER:
+ uid = make_kuid(&init_user_ns, le32_to_cpu(entry->e_id));
+ vfsuid = make_vfsuid(mnt_userns, &init_user_ns, uid);
+ entry->e_id = cpu_to_le32(from_kuid(&init_user_ns,
+ vfsuid_into_kuid(vfsuid)));
+ break;
+ case ACL_GROUP:
+ gid = make_kgid(&init_user_ns, le32_to_cpu(entry->e_id));
+ vfsgid = make_vfsgid(mnt_userns, &init_user_ns, gid);
+ entry->e_id = cpu_to_le32(from_kgid(&init_user_ns,
+ vfsgid_into_kgid(vfsgid)));
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+void posix_acl_setxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode,
+ void *value, size_t size)
+{
+ struct posix_acl_xattr_header *header = value;
+ struct posix_acl_xattr_entry *entry = (void *)(header + 1), *end;
+ int count;
+ vfsuid_t vfsuid;
+ vfsgid_t vfsgid;
+ kuid_t uid;
+ kgid_t gid;
+
+ if (no_idmapping(mnt_userns, i_user_ns(inode)))
return;
- count = posix_acl_xattr_count(size);
+ count = posix_acl_fix_xattr_common(value, size);
if (count < 0)
return;
- if (count == 0)
+
+ for (end = entry + count; entry != end; entry++) {
+ switch (le16_to_cpu(entry->e_tag)) {
+ case ACL_USER:
+ uid = make_kuid(&init_user_ns, le32_to_cpu(entry->e_id));
+ vfsuid = VFSUIDT_INIT(uid);
+ uid = from_vfsuid(mnt_userns, &init_user_ns, vfsuid);
+ entry->e_id = cpu_to_le32(from_kuid(&init_user_ns, uid));
+ break;
+ case ACL_GROUP:
+ gid = make_kgid(&init_user_ns, le32_to_cpu(entry->e_id));
+ vfsgid = VFSGIDT_INIT(gid);
+ gid = from_vfsgid(mnt_userns, &init_user_ns, vfsgid);
+ entry->e_id = cpu_to_le32(from_kgid(&init_user_ns, gid));
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void posix_acl_fix_xattr_userns(
+ struct user_namespace *to, struct user_namespace *from,
+ void *value, size_t size)
+{
+ struct posix_acl_xattr_header *header = value;
+ struct posix_acl_xattr_entry *entry = (void *)(header + 1), *end;
+ int count;
+ kuid_t uid;
+ kgid_t gid;
+
+ count = posix_acl_fix_xattr_common(value, size);
+ if (count < 0)
return;
for (end = entry + count; entry != end; entry++) {
switch(le16_to_cpu(entry->e_tag)) {
case ACL_USER:
uid = make_kuid(from, le32_to_cpu(entry->e_id));
- if (from_user)
- uid = mapped_kuid_user(mnt_userns, &init_user_ns, uid);
- else
- uid = mapped_kuid_fs(mnt_userns, &init_user_ns, uid);
entry->e_id = cpu_to_le32(from_kuid(to, uid));
break;
case ACL_GROUP:
gid = make_kgid(from, le32_to_cpu(entry->e_id));
- if (from_user)
- gid = mapped_kgid_user(mnt_userns, &init_user_ns, gid);
- else
- gid = mapped_kgid_fs(mnt_userns, &init_user_ns, gid);
entry->e_id = cpu_to_le32(from_kgid(to, gid));
break;
default:
}
}
-void posix_acl_fix_xattr_from_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size)
+void posix_acl_fix_xattr_from_user(void *value, size_t size)
{
struct user_namespace *user_ns = current_user_ns();
-
- /* Leave ids untouched on non-idmapped mounts. */
- if (no_idmapping(mnt_userns, i_user_ns(inode)))
- mnt_userns = &init_user_ns;
- if ((user_ns == &init_user_ns) && (mnt_userns == &init_user_ns))
+ if (user_ns == &init_user_ns)
return;
- posix_acl_fix_xattr_userns(&init_user_ns, user_ns, mnt_userns, value,
- size, true);
+ posix_acl_fix_xattr_userns(&init_user_ns, user_ns, value, size);
}
-void posix_acl_fix_xattr_to_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size)
+void posix_acl_fix_xattr_to_user(void *value, size_t size)
{
struct user_namespace *user_ns = current_user_ns();
-
- /* Leave ids untouched on non-idmapped mounts. */
- if (no_idmapping(mnt_userns, i_user_ns(inode)))
- mnt_userns = &init_user_ns;
- if ((user_ns == &init_user_ns) && (mnt_userns == &init_user_ns))
+ if (user_ns == &init_user_ns)
return;
- posix_acl_fix_xattr_userns(user_ns, &init_user_ns, mnt_userns, value,
- size, false);
+ posix_acl_fix_xattr_userns(user_ns, &init_user_ns, value, size);
}
/*
/* Wrapper for transferring ownership of an inode for uid/gid only
* Called from FSXXX_setattr()
*/
-int dquot_transfer(struct inode *inode, struct iattr *iattr)
+int dquot_transfer(struct user_namespace *mnt_userns, struct inode *inode,
+ struct iattr *iattr)
{
struct dquot *transfer_to[MAXQUOTAS] = {};
struct dquot *dquot;
if (!dquot_active(inode))
return 0;
- if (iattr->ia_valid & ATTR_UID && !uid_eq(iattr->ia_uid, inode->i_uid)){
- dquot = dqget(sb, make_kqid_uid(iattr->ia_uid));
+ if (i_uid_needs_update(mnt_userns, iattr, inode)) {
+ kuid_t kuid = from_vfsuid(mnt_userns, i_user_ns(inode),
+ iattr->ia_vfsuid);
+
+ dquot = dqget(sb, make_kqid_uid(kuid));
if (IS_ERR(dquot)) {
if (PTR_ERR(dquot) != -ESRCH) {
ret = PTR_ERR(dquot);
}
transfer_to[USRQUOTA] = dquot;
}
- if (iattr->ia_valid & ATTR_GID && !gid_eq(iattr->ia_gid, inode->i_gid)){
- dquot = dqget(sb, make_kqid_gid(iattr->ia_gid));
+ if (i_gid_needs_update(mnt_userns, iattr, inode)) {
+ kgid_t kgid = from_vfsgid(mnt_userns, i_user_ns(inode),
+ iattr->ia_vfsgid);
+
+ dquot = dqget(sb, make_kqid_gid(kgid));
if (IS_ERR(dquot)) {
if (PTR_ERR(dquot) != -ESRCH) {
ret = PTR_ERR(dquot);
count, fl);
file_end_write(out.file);
} else {
+ if (out.file->f_flags & O_NONBLOCK)
+ fl |= SPLICE_F_NONBLOCK;
+
retval = splice_file_to_pipe(in.file, opipe, &pos, count, fl);
}
struct buffer_head *bh;
struct item_head *ih, tmp_ih;
b_blocknr_t blocknr;
- char *p = NULL;
+ char *p;
int chars;
int ret;
int result;
result = search_for_position_by_key(inode->i_sb, &key, &path);
if (result != POSITION_FOUND) {
pathrelse(&path);
- if (p)
- kunmap(bh_result->b_page);
if (result == IO_ERROR)
return -EIO;
/*
}
pathrelse(&path);
- if (p)
- kunmap(bh_result->b_page);
return ret;
}
/* requested data are in direct item(s) */
* when it is stored in direct item(s)
*/
pathrelse(&path);
- if (p)
- kunmap(bh_result->b_page);
return -ENOENT;
}
* sure we need to. But, this means the item might move if
* kmap schedules
*/
- if (!p)
- p = (char *)kmap(bh_result->b_page);
-
+ p = (char *)kmap(bh_result->b_page);
p += offset;
memset(p, 0, inode->i_sb->s_blocksize);
do {
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
- if (is_quota_modification(inode, attr)) {
+ if (is_quota_modification(mnt_userns, inode, attr)) {
error = dquot_initialize(inode);
if (error)
return error;
reiserfs_write_unlock(inode->i_sb);
if (error)
goto out;
- error = dquot_transfer(inode, attr);
+ error = dquot_transfer(mnt_userns, inode, attr);
reiserfs_write_lock(inode->i_sb);
if (error) {
journal_end(&th);
}
static inline struct uffd_msg userfault_msg(unsigned long address,
+ unsigned long real_address,
unsigned int flags,
unsigned long reason,
unsigned int features)
{
struct uffd_msg msg;
+
msg_init(&msg);
msg.event = UFFD_EVENT_PAGEFAULT;
- if (!(features & UFFD_FEATURE_EXACT_ADDRESS))
- address &= PAGE_MASK;
- msg.arg.pagefault.address = address;
+ msg.arg.pagefault.address = (features & UFFD_FEATURE_EXACT_ADDRESS) ?
+ real_address : address;
+
/*
* These flags indicate why the userfault occurred:
* - UFFD_PAGEFAULT_FLAG_WP indicates a write protect fault.
init_waitqueue_func_entry(&uwq.wq, userfaultfd_wake_function);
uwq.wq.private = current;
- uwq.msg = userfault_msg(vmf->real_address, vmf->flags, reason,
- ctx->features);
+ uwq.msg = userfault_msg(vmf->address, vmf->real_address, vmf->flags,
+ reason, ctx->features);
uwq.ctx = ctx;
uwq.waken = false;
}
EXPORT_SYMBOL_GPL(__vfs_setxattr_locked);
+static inline bool is_posix_acl_xattr(const char *name)
+{
+ return (strcmp(name, XATTR_NAME_POSIX_ACL_ACCESS) == 0) ||
+ (strcmp(name, XATTR_NAME_POSIX_ACL_DEFAULT) == 0);
+}
+
int
vfs_setxattr(struct user_namespace *mnt_userns, struct dentry *dentry,
- const char *name, const void *value, size_t size, int flags)
+ const char *name, void *value, size_t size, int flags)
{
struct inode *inode = dentry->d_inode;
struct inode *delegated_inode = NULL;
int error;
if (size && strcmp(name, XATTR_NAME_CAPS) == 0) {
- error = cap_convert_nscap(mnt_userns, dentry, &value, size);
+ error = cap_convert_nscap(mnt_userns, dentry,
+ (const void **)&value, size);
if (error < 0)
return error;
size = error;
}
+ if (size && is_posix_acl_xattr(name))
+ posix_acl_setxattr_idmapped_mnt(mnt_userns, inode, value, size);
+
retry_deleg:
inode_lock(inode);
error = __vfs_setxattr_locked(mnt_userns, dentry, name, value, size,
return ret;
}
nolsm:
- return __vfs_getxattr(dentry, inode, name, value, size);
+ error = __vfs_getxattr(dentry, inode, name, value, size);
+ if (error > 0 && is_posix_acl_xattr(name))
+ posix_acl_getxattr_idmapped_mnt(mnt_userns, inode, value, size);
+ return error;
}
EXPORT_SYMBOL_GPL(vfs_getxattr);
if (ctx->size &&
((strcmp(ctx->kname->name, XATTR_NAME_POSIX_ACL_ACCESS) == 0) ||
(strcmp(ctx->kname->name, XATTR_NAME_POSIX_ACL_DEFAULT) == 0)))
- posix_acl_fix_xattr_from_user(mnt_userns, d_inode(d),
- ctx->kvalue, ctx->size);
+ posix_acl_fix_xattr_from_user(ctx->kvalue, ctx->size);
}
int do_setxattr(struct user_namespace *mnt_userns, struct dentry *dentry,
if (error > 0) {
if ((strcmp(kname, XATTR_NAME_POSIX_ACL_ACCESS) == 0) ||
(strcmp(kname, XATTR_NAME_POSIX_ACL_DEFAULT) == 0))
- posix_acl_fix_xattr_to_user(mnt_userns, d_inode(d),
- ctx->kvalue, error);
+ posix_acl_fix_xattr_to_user(ctx->kvalue, error);
if (ctx->size && copy_to_user(ctx->value, ctx->kvalue, error))
error = -EFAULT;
} else if (error == -ERANGE && ctx->size >= XATTR_SIZE_MAX) {
uint qflags = 0;
if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp)) {
- uid = iattr->ia_uid;
+ uid = from_vfsuid(mnt_userns, i_user_ns(inode),
+ iattr->ia_vfsuid);
qflags |= XFS_QMOPT_UQUOTA;
} else {
uid = inode->i_uid;
}
if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp)) {
- gid = iattr->ia_gid;
+ gid = from_vfsgid(mnt_userns, i_user_ns(inode),
+ iattr->ia_vfsgid);
qflags |= XFS_QMOPT_GQUOTA;
} else {
gid = inode->i_gid;
* didn't have the inode locked, inode's dquot(s) would have changed
* also.
*/
- if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp) &&
- !uid_eq(inode->i_uid, iattr->ia_uid)) {
+ if (XFS_IS_UQUOTA_ON(mp) &&
+ i_uid_needs_update(mnt_userns, iattr, inode)) {
ASSERT(udqp);
old_udqp = xfs_qm_vop_chown(tp, ip, &ip->i_udquot, udqp);
}
- if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp) &&
- !gid_eq(inode->i_gid, iattr->ia_gid)) {
+ if (XFS_IS_GQUOTA_ON(mp) &&
+ i_gid_needs_update(mnt_userns, iattr, inode)) {
ASSERT(xfs_has_pquotino(mp) || !XFS_IS_PQUOTA_ON(mp));
ASSERT(gdqp);
old_gdqp = xfs_qm_vop_chown(tp, ip, &ip->i_gdquot, gdqp);
!uid_eq(iattr->ia_uid, inode->i_uid)) ||
((iattr->ia_valid & ATTR_GID) &&
!gid_eq(iattr->ia_gid, inode->i_gid))) {
- ret = dquot_transfer(inode, iattr);
+ ret = dquot_transfer(mnt_userns, inode, iattr);
if (ret)
return ret;
}
acpi_handle handle; /* no handle for fixed hardware */
struct fwnode_handle fwnode;
struct acpi_device *parent;
- struct list_head children;
- struct list_head node;
struct list_head wakeup_list;
struct list_head del_list;
struct acpi_device_status status;
struct acpi_device_data data;
struct acpi_scan_handler *handler;
struct acpi_hotplug_context *hp;
- struct acpi_driver *driver;
const struct acpi_gpio_mapping *driver_gpios;
void *driver_data;
struct device dev;
int acpi_bus_for_each_dev(int (*fn)(struct device *, void *), void *data);
int acpi_dev_for_each_child(struct acpi_device *adev,
int (*fn)(struct acpi_device *, void *), void *data);
+int acpi_dev_for_each_child_reverse(struct acpi_device *adev,
+ int (*fn)(struct acpi_device *, void *),
+ void *data);
/*
* Events
int acpi_device_set_power(struct acpi_device *device, int state);
int acpi_bus_init_power(struct acpi_device *device);
int acpi_device_fix_up_power(struct acpi_device *device);
+void acpi_device_fix_up_power_extended(struct acpi_device *adev);
int acpi_bus_update_power(acpi_handle handle, int *state_p);
int acpi_device_update_power(struct acpi_device *device, int *state_p);
bool acpi_bus_power_manageable(acpi_handle handle);
}
struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
u64 address, bool check_children);
+struct acpi_device *acpi_find_child_by_adr(struct acpi_device *adev,
+ acpi_bus_address adr);
int acpi_is_root_bridge(acpi_handle);
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
#include <acpi/pcc.h>
#include <acpi/processor.h>
-/* Support CPPCv2 and CPPCv3 */
+/* CPPCv2 and CPPCv3 support */
#define CPPC_V2_REV 2
#define CPPC_V3_REV 3
#define CPPC_V2_NUM_ENT 21
#endif /* CONFIG_ACPI_PROCESSOR_IDLE */
/* in processor_thermal.c */
-int acpi_processor_get_limit_info(struct acpi_processor *pr);
+int acpi_processor_thermal_init(struct acpi_processor *pr,
+ struct acpi_device *device);
+void acpi_processor_thermal_exit(struct acpi_processor *pr,
+ struct acpi_device *device);
extern const struct thermal_cooling_device_ops processor_cooling_ops;
-#if defined(CONFIG_ACPI_CPU_FREQ_PSS) & defined(CONFIG_CPU_FREQ)
+#ifdef CONFIG_CPU_FREQ
void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy);
void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy);
#else
{
return;
}
-#endif /* CONFIG_ACPI_CPU_FREQ_PSS */
+#endif /* CONFIG_CPU_FREQ */
#endif
#define wmb() do { kcsan_wmb(); __wmb(); } while (0)
#endif
+#ifdef __dma_mb
+#define dma_mb() do { kcsan_mb(); __dma_mb(); } while (0)
+#endif
+
#ifdef __dma_rmb
#define dma_rmb() do { kcsan_rmb(); __dma_rmb(); } while (0)
#endif
#define wmb() mb()
#endif
+#ifndef dma_mb
+#define dma_mb() mb()
+#endif
+
#ifndef dma_rmb
#define dma_rmb() rmb()
#endif
#elif defined(CONFIG_GENERIC_IOREMAP)
#include <linux/pgtable.h>
-void __iomem *ioremap_prot(phys_addr_t addr, size_t size, unsigned long prot);
+/*
+ * Arch code can implement the following two hooks when using GENERIC_IOREMAP
+ * ioremap_allowed() return a bool,
+ * - true means continue to remap
+ * - false means skip remap and return directly
+ * iounmap_allowed() return a bool,
+ * - true means continue to vunmap
+ * - false means skip vunmap and return directly
+ */
+#ifndef ioremap_allowed
+#define ioremap_allowed ioremap_allowed
+static inline bool ioremap_allowed(phys_addr_t phys_addr, size_t size,
+ unsigned long prot)
+{
+ return true;
+}
+#endif
+
+#ifndef iounmap_allowed
+#define iounmap_allowed iounmap_allowed
+static inline bool iounmap_allowed(void *addr)
+{
+ return true;
+}
+#endif
+
+void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
+ unsigned long prot);
void iounmap(volatile void __iomem *addr);
static inline void __iomem *ioremap(phys_addr_t addr, size_t size)
}
#endif
-#ifndef CONFIG_GENERIC_DEVMEM_IS_ALLOWED
extern int devmem_is_allowed(unsigned long pfn);
-#endif
#endif /* __KERNEL__ */
#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
- int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
- u32 reg, u32 val, int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
- u32 tidr;
-
- /* Assume v1 ip if bits [31:16] are zero */
- tidr = readl_relaxed(timer->io_base);
- if (!(tidr >> 16)) {
- timer->revision = 1;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
- timer->func_base = timer->io_base;
- } else {
- timer->revision = 2;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
- timer->pend = timer->io_base +
- _OMAP_TIMER_WRITE_PEND_OFFSET +
- OMAP_TIMER_V2_FUNC_OFFSET;
- timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
- }
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer: pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
- if (timer->posted)
- return;
-
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
- timer->posted = OMAP_TIMER_NONPOSTED;
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
- return;
- }
-
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
- OMAP_TIMER_CTRL_POSTED, 0);
- timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
- timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer: pointer to timer handle
- * @errata: errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
- u32 errata)
-{
- timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
- int posted, unsigned long rate)
-{
- u32 l;
-
- l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- if (l & OMAP_TIMER_CTRL_ST) {
- l &= ~0x1;
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
- /* Readback to make sure write has completed */
- __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- /*
- * Wait for functional clock period x 3.5 to make sure that
- * timer is stopped
- */
- udelay(3500000 / rate + 1);
-#endif
- }
-
- /* Ack possibly pending interrupt */
- writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
- u32 ctrl, unsigned int load,
- int posted)
-{
- __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_ena);
- __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
- return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
#endif /* __CLOCKSOURCE_DMTIMER_H */
#define CLK_GOUT_PERI_USI0 43
#define CLK_GOUT_PERI_USI1 44
#define CLK_GOUT_PERI_USI2 45
-#define TOP_NR_CLK 46
+#define CLK_MOUT_FSYS_BUS 46
+#define CLK_MOUT_FSYS_MMC_CARD 47
+#define CLK_MOUT_FSYS_MMC_EMBD 48
+#define CLK_MOUT_FSYS_MMC_SDIO 49
+#define CLK_MOUT_FSYS_USB30DRD 50
+#define CLK_DOUT_FSYS_BUS 51
+#define CLK_DOUT_FSYS_MMC_CARD 52
+#define CLK_DOUT_FSYS_MMC_EMBD 53
+#define CLK_DOUT_FSYS_MMC_SDIO 54
+#define CLK_DOUT_FSYS_USB30DRD 55
+#define CLK_GOUT_FSYS_BUS 56
+#define CLK_GOUT_FSYS_MMC_CARD 57
+#define CLK_GOUT_FSYS_MMC_EMBD 58
+#define CLK_GOUT_FSYS_MMC_SDIO 59
+#define CLK_GOUT_FSYS_USB30DRD 60
+#define TOP_NR_CLK 61
/* CMU_CORE */
-#define CLK_MOUT_CORE_BUS_USER 1
-#define CLK_MOUT_CORE_CCI_USER 2
-#define CLK_MOUT_CORE_G3D_USER 3
-#define CLK_MOUT_CORE_GIC 4
-#define CLK_DOUT_CORE_BUSP 5
-#define CLK_GOUT_CCI_ACLK 6
-#define CLK_GOUT_GIC400_CLK 7
-#define CORE_NR_CLK 8
+#define CLK_MOUT_CORE_BUS_USER 1
+#define CLK_MOUT_CORE_CCI_USER 2
+#define CLK_MOUT_CORE_G3D_USER 3
+#define CLK_MOUT_CORE_GIC 4
+#define CLK_DOUT_CORE_BUSP 5
+#define CLK_GOUT_CCI_ACLK 6
+#define CLK_GOUT_GIC400_CLK 7
+#define CLK_GOUT_TREX_D_CORE_ACLK 8
+#define CLK_GOUT_TREX_D_CORE_GCLK 9
+#define CLK_GOUT_TREX_D_CORE_PCLK 10
+#define CLK_GOUT_TREX_P_CORE_ACLK_P_CORE 11
+#define CLK_GOUT_TREX_P_CORE_CCLK_P_CORE 12
+#define CLK_GOUT_TREX_P_CORE_PCLK 13
+#define CLK_GOUT_TREX_P_CORE_PCLK_P_CORE 14
+#define CORE_NR_CLK 15
/* CMU_PERI */
#define CLK_MOUT_PERI_BUS_USER 1
#define CLK_GOUT_WDT1_PCLK 43
#define PERI_NR_CLK 44
+/* CMU_FSYS */
+#define CLK_MOUT_FSYS_BUS_USER 1
+#define CLK_MOUT_FSYS_MMC_CARD_USER 2
+#define CLK_MOUT_FSYS_MMC_EMBD_USER 3
+#define CLK_MOUT_FSYS_MMC_SDIO_USER 4
+#define CLK_MOUT_FSYS_USB30DRD_USER 4
+#define CLK_GOUT_MMC_CARD_ACLK 5
+#define CLK_GOUT_MMC_CARD_SDCLKIN 6
+#define CLK_GOUT_MMC_EMBD_ACLK 7
+#define CLK_GOUT_MMC_EMBD_SDCLKIN 8
+#define CLK_GOUT_MMC_SDIO_ACLK 9
+#define CLK_GOUT_MMC_SDIO_SDCLKIN 10
+#define FSYS_NR_CLK 11
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_7885_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Nuvoton Technologies.
+ * Author: Tomer Maimon <tomer.maimon@nuvoton.com>
+ *
+ * Device Tree binding constants for NPCM8XX clock controller.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NPCM8XX_H
+#define __DT_BINDINGS_CLOCK_NPCM8XX_H
+
+#define NPCM8XX_CLK_CPU 0
+#define NPCM8XX_CLK_GFX_PIXEL 1
+#define NPCM8XX_CLK_MC 2
+#define NPCM8XX_CLK_ADC 3
+#define NPCM8XX_CLK_AHB 4
+#define NPCM8XX_CLK_TIMER 5
+#define NPCM8XX_CLK_UART 6
+#define NPCM8XX_CLK_UART2 7
+#define NPCM8XX_CLK_MMC 8
+#define NPCM8XX_CLK_SPI3 9
+#define NPCM8XX_CLK_PCI 10
+#define NPCM8XX_CLK_AXI 11
+#define NPCM8XX_CLK_APB4 12
+#define NPCM8XX_CLK_APB3 13
+#define NPCM8XX_CLK_APB2 14
+#define NPCM8XX_CLK_APB1 15
+#define NPCM8XX_CLK_APB5 16
+#define NPCM8XX_CLK_CLKOUT 17
+#define NPCM8XX_CLK_GFX 18
+#define NPCM8XX_CLK_SU 19
+#define NPCM8XX_CLK_SU48 20
+#define NPCM8XX_CLK_SDHC 21
+#define NPCM8XX_CLK_SPI0 22
+#define NPCM8XX_CLK_SPI1 23
+#define NPCM8XX_CLK_SPIX 24
+#define NPCM8XX_CLK_RG 25
+#define NPCM8XX_CLK_RCP 26
+#define NPCM8XX_CLK_PRE_ADC 27
+#define NPCM8XX_CLK_ATB 28
+#define NPCM8XX_CLK_PRE_CLK 29
+#define NPCM8XX_CLK_TH 30
+#define NPCM8XX_CLK_REFCLK 31
+#define NPCM8XX_CLK_SYSBYPCK 32
+#define NPCM8XX_CLK_MCBYPCK 33
+
+#define NPCM8XX_NUM_CLOCKS (NPCM8XX_CLK_MCBYPCK + 1)
+
+#endif
--- /dev/null
+qcom,dispcc-sm8250.h
\ No newline at end of file
#define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130
#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
+#define USB0_GDSC 0
+#define USB1_GDSC 1
+
#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK 0
+#define GPU_CC_CB_CLK 1
+#define GPU_CC_CRC_AHB_CLK 2
+#define GPU_CC_CX_APB_CLK 3
+#define GPU_CC_CX_GMU_CLK 4
+#define GPU_CC_CX_QDSS_AT_CLK 5
+#define GPU_CC_CX_QDSS_TRIG_CLK 6
+#define GPU_CC_CX_QDSS_TSCTR_CLK 7
+#define GPU_CC_CX_SNOC_DVM_CLK 8
+#define GPU_CC_CXO_AON_CLK 9
+#define GPU_CC_CXO_CLK 10
+#define GPU_CC_FREQ_MEASURE_CLK 11
+#define GPU_CC_GMU_CLK_SRC 12
+#define GPU_CC_GX_GMU_CLK 13
+#define GPU_CC_GX_QDSS_TSCTR_CLK 14
+#define GPU_CC_GX_VSENSE_CLK 15
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 16
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC 17
+#define GPU_CC_HUB_AON_CLK 18
+#define GPU_CC_HUB_CLK_SRC 19
+#define GPU_CC_HUB_CX_INT_CLK 20
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC 21
+#define GPU_CC_MND1X_0_GFX3D_CLK 22
+#define GPU_CC_MND1X_1_GFX3D_CLK 23
+#define GPU_CC_PLL0 24
+#define GPU_CC_PLL1 25
+#define GPU_CC_SLEEP_CLK 26
+
+/* GPU_CC resets */
+#define GPUCC_GPU_CC_ACD_BCR 0
+#define GPUCC_GPU_CC_CB_BCR 1
+#define GPUCC_GPU_CC_CX_BCR 2
+#define GPUCC_GPU_CC_FAST_HUB_BCR 3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR 4
+#define GPUCC_GPU_CC_GMU_BCR 5
+#define GPUCC_GPU_CC_GX_BCR 6
+#define GPUCC_GPU_CC_XO_BCR 7
+
+/* GPU_CC GDSCRs */
+#define GPU_CX_GDSC 0
+#define GPU_GX_GDSC 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8450_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8450_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK 0
+#define CAM_CC_BPS_CLK 1
+#define CAM_CC_BPS_CLK_SRC 2
+#define CAM_CC_BPS_FAST_AHB_CLK 3
+#define CAM_CC_CAMNOC_AXI_CLK 4
+#define CAM_CC_CAMNOC_AXI_CLK_SRC 5
+#define CAM_CC_CAMNOC_DCD_XO_CLK 6
+#define CAM_CC_CCI_0_CLK 7
+#define CAM_CC_CCI_0_CLK_SRC 8
+#define CAM_CC_CCI_1_CLK 9
+#define CAM_CC_CCI_1_CLK_SRC 10
+#define CAM_CC_CORE_AHB_CLK 11
+#define CAM_CC_CPAS_AHB_CLK 12
+#define CAM_CC_CPAS_BPS_CLK 13
+#define CAM_CC_CPAS_FAST_AHB_CLK 14
+#define CAM_CC_CPAS_IFE_0_CLK 15
+#define CAM_CC_CPAS_IFE_1_CLK 16
+#define CAM_CC_CPAS_IFE_2_CLK 17
+#define CAM_CC_CPAS_IFE_LITE_CLK 18
+#define CAM_CC_CPAS_IPE_NPS_CLK 19
+#define CAM_CC_CPAS_SBI_CLK 20
+#define CAM_CC_CPAS_SFE_0_CLK 21
+#define CAM_CC_CPAS_SFE_1_CLK 22
+#define CAM_CC_CPHY_RX_CLK_SRC 23
+#define CAM_CC_CSI0PHYTIMER_CLK 24
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 25
+#define CAM_CC_CSI1PHYTIMER_CLK 26
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 27
+#define CAM_CC_CSI2PHYTIMER_CLK 28
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 29
+#define CAM_CC_CSI3PHYTIMER_CLK 30
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 31
+#define CAM_CC_CSI4PHYTIMER_CLK 32
+#define CAM_CC_CSI4PHYTIMER_CLK_SRC 33
+#define CAM_CC_CSI5PHYTIMER_CLK 34
+#define CAM_CC_CSI5PHYTIMER_CLK_SRC 35
+#define CAM_CC_CSID_CLK 36
+#define CAM_CC_CSID_CLK_SRC 37
+#define CAM_CC_CSID_CSIPHY_RX_CLK 38
+#define CAM_CC_CSIPHY0_CLK 39
+#define CAM_CC_CSIPHY1_CLK 40
+#define CAM_CC_CSIPHY2_CLK 41
+#define CAM_CC_CSIPHY3_CLK 42
+#define CAM_CC_CSIPHY4_CLK 43
+#define CAM_CC_CSIPHY5_CLK 44
+#define CAM_CC_FAST_AHB_CLK_SRC 45
+#define CAM_CC_GDSC_CLK 46
+#define CAM_CC_ICP_AHB_CLK 47
+#define CAM_CC_ICP_CLK 48
+#define CAM_CC_ICP_CLK_SRC 49
+#define CAM_CC_IFE_0_CLK 50
+#define CAM_CC_IFE_0_CLK_SRC 51
+#define CAM_CC_IFE_0_DSP_CLK 52
+#define CAM_CC_IFE_0_FAST_AHB_CLK 53
+#define CAM_CC_IFE_1_CLK 54
+#define CAM_CC_IFE_1_CLK_SRC 55
+#define CAM_CC_IFE_1_DSP_CLK 56
+#define CAM_CC_IFE_1_FAST_AHB_CLK 57
+#define CAM_CC_IFE_2_CLK 58
+#define CAM_CC_IFE_2_CLK_SRC 59
+#define CAM_CC_IFE_2_DSP_CLK 60
+#define CAM_CC_IFE_2_FAST_AHB_CLK 61
+#define CAM_CC_IFE_LITE_AHB_CLK 62
+#define CAM_CC_IFE_LITE_CLK 63
+#define CAM_CC_IFE_LITE_CLK_SRC 64
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK 65
+#define CAM_CC_IFE_LITE_CSID_CLK 66
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC 67
+#define CAM_CC_IPE_NPS_AHB_CLK 68
+#define CAM_CC_IPE_NPS_CLK 69
+#define CAM_CC_IPE_NPS_CLK_SRC 70
+#define CAM_CC_IPE_NPS_FAST_AHB_CLK 71
+#define CAM_CC_IPE_PPS_CLK 72
+#define CAM_CC_IPE_PPS_FAST_AHB_CLK 73
+#define CAM_CC_JPEG_CLK 74
+#define CAM_CC_JPEG_CLK_SRC 75
+#define CAM_CC_MCLK0_CLK 76
+#define CAM_CC_MCLK0_CLK_SRC 77
+#define CAM_CC_MCLK1_CLK 78
+#define CAM_CC_MCLK1_CLK_SRC 79
+#define CAM_CC_MCLK2_CLK 80
+#define CAM_CC_MCLK2_CLK_SRC 81
+#define CAM_CC_MCLK3_CLK 82
+#define CAM_CC_MCLK3_CLK_SRC 83
+#define CAM_CC_MCLK4_CLK 84
+#define CAM_CC_MCLK4_CLK_SRC 85
+#define CAM_CC_MCLK5_CLK 86
+#define CAM_CC_MCLK5_CLK_SRC 87
+#define CAM_CC_MCLK6_CLK 88
+#define CAM_CC_MCLK6_CLK_SRC 89
+#define CAM_CC_MCLK7_CLK 90
+#define CAM_CC_MCLK7_CLK_SRC 91
+#define CAM_CC_PLL0 92
+#define CAM_CC_PLL0_OUT_EVEN 93
+#define CAM_CC_PLL0_OUT_ODD 94
+#define CAM_CC_PLL1 95
+#define CAM_CC_PLL1_OUT_EVEN 96
+#define CAM_CC_PLL2 97
+#define CAM_CC_PLL3 98
+#define CAM_CC_PLL3_OUT_EVEN 99
+#define CAM_CC_PLL4 100
+#define CAM_CC_PLL4_OUT_EVEN 101
+#define CAM_CC_PLL5 102
+#define CAM_CC_PLL5_OUT_EVEN 103
+#define CAM_CC_PLL6 104
+#define CAM_CC_PLL6_OUT_EVEN 105
+#define CAM_CC_PLL7 106
+#define CAM_CC_PLL7_OUT_EVEN 107
+#define CAM_CC_PLL8 108
+#define CAM_CC_PLL8_OUT_EVEN 109
+#define CAM_CC_QDSS_DEBUG_CLK 110
+#define CAM_CC_QDSS_DEBUG_CLK_SRC 111
+#define CAM_CC_QDSS_DEBUG_XO_CLK 112
+#define CAM_CC_SBI_AHB_CLK 113
+#define CAM_CC_SBI_CLK 114
+#define CAM_CC_SFE_0_CLK 115
+#define CAM_CC_SFE_0_CLK_SRC 116
+#define CAM_CC_SFE_0_FAST_AHB_CLK 117
+#define CAM_CC_SFE_1_CLK 118
+#define CAM_CC_SFE_1_CLK_SRC 119
+#define CAM_CC_SFE_1_FAST_AHB_CLK 120
+#define CAM_CC_SLEEP_CLK 121
+#define CAM_CC_SLEEP_CLK_SRC 122
+#define CAM_CC_SLOW_AHB_CLK_SRC 123
+#define CAM_CC_XO_CLK_SRC 124
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_ICP_BCR 1
+#define CAM_CC_IFE_0_BCR 2
+#define CAM_CC_IFE_1_BCR 3
+#define CAM_CC_IFE_2_BCR 4
+#define CAM_CC_IPE_0_BCR 5
+#define CAM_CC_QDSS_DEBUG_BCR 6
+#define CAM_CC_SBI_BCR 7
+#define CAM_CC_SFE_0_BCR 8
+#define CAM_CC_SFE_1_BCR 9
+
+/* CAM_CC GDSCRs */
+#define BPS_GDSC 0
+#define IPE_0_GDSC 1
+#define SBI_GDSC 2
+#define IFE_0_GDSC 3
+#define IFE_1_GDSC 4
+#define IFE_2_GDSC 5
+#define SFE_0_GDSC 6
+#define SFE_1_GDSC 7
+#define TITAN_TOP_GDSC 8
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#ifndef _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+
+/* gates */
+#define CLK_RTC 0
+#define CLK_OTPRX 1
+#define CLK_NOC 2
+#define CLK_BR 3
+#define CLK_SPIFL 4
+#define CLK_PERI0 5
+#define CLK_PERI1 6
+#define CLK_STC0 7
+#define CLK_STC_AV0 8
+#define CLK_STC_AV1 9
+#define CLK_STC_AV2 10
+#define CLK_UA0 11
+#define CLK_UA1 12
+#define CLK_UA2 13
+#define CLK_UA3 14
+#define CLK_UA4 15
+#define CLK_HWUA 16
+#define CLK_DDC0 17
+#define CLK_UADMA 18
+#define CLK_CBDMA0 19
+#define CLK_CBDMA1 20
+#define CLK_SPI_COMBO_0 21
+#define CLK_SPI_COMBO_1 22
+#define CLK_SPI_COMBO_2 23
+#define CLK_SPI_COMBO_3 24
+#define CLK_AUD 25
+#define CLK_USBC0 26
+#define CLK_USBC1 27
+#define CLK_UPHY0 28
+#define CLK_UPHY1 29
+#define CLK_I2CM0 30
+#define CLK_I2CM1 31
+#define CLK_I2CM2 32
+#define CLK_I2CM3 33
+#define CLK_PMC 34
+#define CLK_CARD_CTL0 35
+#define CLK_CARD_CTL1 36
+#define CLK_CARD_CTL4 37
+#define CLK_BCH 38
+#define CLK_DDFCH 39
+#define CLK_CSIIW0 40
+#define CLK_CSIIW1 41
+#define CLK_MIPICSI0 42
+#define CLK_MIPICSI1 43
+#define CLK_HDMI_TX 44
+#define CLK_VPOST 45
+#define CLK_TGEN 46
+#define CLK_DMIX 47
+#define CLK_TCON 48
+#define CLK_GPIO 49
+#define CLK_MAILBOX 50
+#define CLK_SPIND 51
+#define CLK_I2C2CBUS 52
+#define CLK_SEC 53
+#define CLK_DVE 54
+#define CLK_GPOST0 55
+#define CLK_OSD0 56
+#define CLK_DISP_PWM 57
+#define CLK_UADBG 58
+#define CLK_FIO_CTL 59
+#define CLK_FPGA 60
+#define CLK_L2SW 61
+#define CLK_ICM 62
+#define CLK_AXI_GLOBAL 63
+
+/* plls */
+#define PLL_A 64
+#define PLL_E 65
+#define PLL_E_2P5 66
+#define PLL_E_25 67
+#define PLL_E_112P5 68
+#define PLL_F 69
+#define PLL_TV 70
+#define PLL_TV_A 71
+#define PLL_SYS 72
+
+#define CLK_MAX 73
+
+#endif
* throughput and memory controller power.
*/
#define TEGRA234_CLK_EMC 31U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
+#define TEGRA234_CLK_HOST1X 46U
/** @brief output of gate CLK_ENB_FUSE */
#define TEGRA234_CLK_FUSE 40U
/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C1 */
#define TEGRA234_CLK_UARTA 155U
/** @brief output of gate CLK_ENB_PEX1_CORE_6 */
#define TEGRA234_CLK_PEX1_C6_CORE 161U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */
+#define TEGRA234_CLK_VIC 167U
/** @brief output of gate CLK_ENB_PEX2_CORE_7 */
#define TEGRA234_CLK_PEX2_C7_CORE 171U
/** @brief output of gate CLK_ENB_PEX2_CORE_8 */
#define TEGRA234_CLK_PEX1_C5_CORE 225U
/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */
#define TEGRA234_CLK_PLLC4 237U
+/** @brief RX clock recovered from MGBE0 lane input */
+#define TEGRA234_CLK_MGBE0_RX_INPUT 248U
+/** @brief RX clock recovered from MGBE1 lane input */
+#define TEGRA234_CLK_MGBE1_RX_INPUT 249U
+/** @brief RX clock recovered from MGBE2 lane input */
+#define TEGRA234_CLK_MGBE2_RX_INPUT 250U
+/** @brief RX clock recovered from MGBE3 lane input */
+#define TEGRA234_CLK_MGBE3_RX_INPUT 251U
/** @brief 32K input clock provided by PMIC */
#define TEGRA234_CLK_CLK_32K 289U
+/** @brief Monitored branch of MBGE0 RX input clock */
+#define TEGRA234_CLK_MGBE0_RX_INPUT_M 357U
+/** @brief Monitored branch of MBGE1 RX input clock */
+#define TEGRA234_CLK_MGBE1_RX_INPUT_M 358U
+/** @brief Monitored branch of MBGE2 RX input clock */
+#define TEGRA234_CLK_MGBE2_RX_INPUT_M 359U
+/** @brief Monitored branch of MBGE3 RX input clock */
+#define TEGRA234_CLK_MGBE3_RX_INPUT_M 360U
+/** @brief Monitored branch of MGBE0 RX PCS mux output */
+#define TEGRA234_CLK_MGBE0_RX_PCS_M 361U
+/** @brief Monitored branch of MGBE1 RX PCS mux output */
+#define TEGRA234_CLK_MGBE1_RX_PCS_M 362U
+/** @brief Monitored branch of MGBE2 RX PCS mux output */
+#define TEGRA234_CLK_MGBE2_RX_PCS_M 363U
+/** @brief Monitored branch of MGBE3 RX PCS mux output */
+#define TEGRA234_CLK_MGBE3_RX_PCS_M 364U
+/** @brief RX PCS clock recovered from MGBE0 lane input */
+#define TEGRA234_CLK_MGBE0_RX_PCS_INPUT 369U
+/** @brief RX PCS clock recovered from MGBE1 lane input */
+#define TEGRA234_CLK_MGBE1_RX_PCS_INPUT 370U
+/** @brief RX PCS clock recovered from MGBE2 lane input */
+#define TEGRA234_CLK_MGBE2_RX_PCS_INPUT 371U
+/** @brief RX PCS clock recovered from MGBE3 lane input */
+#define TEGRA234_CLK_MGBE3_RX_PCS_INPUT 372U
+/** @brief output of mux controlled by GBE_UPHY_MGBE0_RX_PCS_CLK_SRC_SEL */
+#define TEGRA234_CLK_MGBE0_RX_PCS 373U
+/** @brief GBE_UPHY_MGBE0_TX_CLK divider gated output */
+#define TEGRA234_CLK_MGBE0_TX 374U
+/** @brief GBE_UPHY_MGBE0_TX_PCS_CLK divider gated output */
+#define TEGRA234_CLK_MGBE0_TX_PCS 375U
+/** @brief GBE_UPHY_MGBE0_MAC_CLK divider output */
+#define TEGRA234_CLK_MGBE0_MAC_DIVIDER 376U
+/** @brief GBE_UPHY_MGBE0_MAC_CLK gate output */
+#define TEGRA234_CLK_MGBE0_MAC 377U
+/** @brief GBE_UPHY_MGBE0_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE0_MACSEC 378U
+/** @brief GBE_UPHY_MGBE0_EEE_PCS_CLK gate output */
+#define TEGRA234_CLK_MGBE0_EEE_PCS 379U
+/** @brief GBE_UPHY_MGBE0_APP_CLK gate output */
+#define TEGRA234_CLK_MGBE0_APP 380U
+/** @brief GBE_UPHY_MGBE0_PTP_REF_CLK divider gated output */
+#define TEGRA234_CLK_MGBE0_PTP_REF 381U
+/** @brief output of mux controlled by GBE_UPHY_MGBE1_RX_PCS_CLK_SRC_SEL */
+#define TEGRA234_CLK_MGBE1_RX_PCS 382U
+/** @brief GBE_UPHY_MGBE1_TX_CLK divider gated output */
+#define TEGRA234_CLK_MGBE1_TX 383U
+/** @brief GBE_UPHY_MGBE1_TX_PCS_CLK divider gated output */
+#define TEGRA234_CLK_MGBE1_TX_PCS 384U
+/** @brief GBE_UPHY_MGBE1_MAC_CLK divider output */
+#define TEGRA234_CLK_MGBE1_MAC_DIVIDER 385U
+/** @brief GBE_UPHY_MGBE1_MAC_CLK gate output */
+#define TEGRA234_CLK_MGBE1_MAC 386U
+/** @brief GBE_UPHY_MGBE1_EEE_PCS_CLK gate output */
+#define TEGRA234_CLK_MGBE1_EEE_PCS 388U
+/** @brief GBE_UPHY_MGBE1_APP_CLK gate output */
+#define TEGRA234_CLK_MGBE1_APP 389U
+/** @brief GBE_UPHY_MGBE1_PTP_REF_CLK divider gated output */
+#define TEGRA234_CLK_MGBE1_PTP_REF 390U
+/** @brief output of mux controlled by GBE_UPHY_MGBE2_RX_PCS_CLK_SRC_SEL */
+#define TEGRA234_CLK_MGBE2_RX_PCS 391U
+/** @brief GBE_UPHY_MGBE2_TX_CLK divider gated output */
+#define TEGRA234_CLK_MGBE2_TX 392U
+/** @brief GBE_UPHY_MGBE2_TX_PCS_CLK divider gated output */
+#define TEGRA234_CLK_MGBE2_TX_PCS 393U
+/** @brief GBE_UPHY_MGBE2_MAC_CLK divider output */
+#define TEGRA234_CLK_MGBE2_MAC_DIVIDER 394U
+/** @brief GBE_UPHY_MGBE2_MAC_CLK gate output */
+#define TEGRA234_CLK_MGBE2_MAC 395U
+/** @brief GBE_UPHY_MGBE2_EEE_PCS_CLK gate output */
+#define TEGRA234_CLK_MGBE2_EEE_PCS 397U
+/** @brief GBE_UPHY_MGBE2_APP_CLK gate output */
+#define TEGRA234_CLK_MGBE2_APP 398U
+/** @brief GBE_UPHY_MGBE2_PTP_REF_CLK divider gated output */
+#define TEGRA234_CLK_MGBE2_PTP_REF 399U
+/** @brief output of mux controlled by GBE_UPHY_MGBE3_RX_PCS_CLK_SRC_SEL */
+#define TEGRA234_CLK_MGBE3_RX_PCS 400U
+/** @brief GBE_UPHY_MGBE3_TX_CLK divider gated output */
+#define TEGRA234_CLK_MGBE3_TX 401U
+/** @brief GBE_UPHY_MGBE3_TX_PCS_CLK divider gated output */
+#define TEGRA234_CLK_MGBE3_TX_PCS 402U
+/** @brief GBE_UPHY_MGBE3_MAC_CLK divider output */
+#define TEGRA234_CLK_MGBE3_MAC_DIVIDER 403U
+/** @brief GBE_UPHY_MGBE3_MAC_CLK gate output */
+#define TEGRA234_CLK_MGBE3_MAC 404U
+/** @brief GBE_UPHY_MGBE3_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE3_MACSEC 405U
+/** @brief GBE_UPHY_MGBE3_EEE_PCS_CLK gate output */
+#define TEGRA234_CLK_MGBE3_EEE_PCS 406U
+/** @brief GBE_UPHY_MGBE3_APP_CLK gate output */
+#define TEGRA234_CLK_MGBE3_APP 407U
+/** @brief GBE_UPHY_MGBE3_PTP_REF_CLK divider gated output */
+#define TEGRA234_CLK_MGBE3_PTP_REF 408U
/** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */
#define TEGRA234_CLK_AZA_2XBIT 457U
/** @brief aza_2xbitclk / 2 (aza_bitclk) */
#define TEGRA234_CLK_AZA_BIT 458U
+
#endif
#define IPCC_CLIENT_PCIE1 14
#define IPCC_CLIENT_PCIE2 15
#define IPCC_CLIENT_SPSS 16
+#define IPCC_CLIENT_NSP1 18
#define IPCC_CLIENT_TME 23
#define IPCC_CLIENT_WPSS 24
/* NISO0 stream IDs */
#define TEGRA234_SID_APE 0x02
#define TEGRA234_SID_HDA 0x03
+#define TEGRA234_SID_GPCDMA 0x04
+#define TEGRA234_SID_MGBE 0x06
#define TEGRA234_SID_PCIE0 0x12
#define TEGRA234_SID_PCIE4 0x13
#define TEGRA234_SID_PCIE5 0x14
#define TEGRA234_SID_PCIE6 0x15
#define TEGRA234_SID_PCIE9 0x1f
+#define TEGRA234_SID_MGBE_VF1 0x49
+#define TEGRA234_SID_MGBE_VF2 0x4a
+#define TEGRA234_SID_MGBE_VF3 0x4b
/* NISO1 stream IDs */
#define TEGRA234_SID_SDMMC4 0x02
#define TEGRA234_SID_PCIE8 0x09
#define TEGRA234_SID_PCIE10 0x0b
#define TEGRA234_SID_BPMP 0x10
+#define TEGRA234_SID_HOST1X 0x27
+#define TEGRA234_SID_VIC 0x34
/*
* memory client IDs
/* High-definition audio (HDA) read clients */
#define TEGRA234_MEMORY_CLIENT_HDAR 0x15
+#define TEGRA234_MEMORY_CLIENT_HOST1XDMAR 0x16
/* PCIE6 read clients */
#define TEGRA234_MEMORY_CLIENT_PCIE6AR 0x28
/* PCIE6 write clients */
#define TEGRA234_MEMORY_CLIENT_PCIE10AR1 0x48
/* PCIE7r1 read clients */
#define TEGRA234_MEMORY_CLIENT_PCIE7AR1 0x49
+/* MGBE0 read client */
+#define TEGRA234_MEMORY_CLIENT_MGBEARD 0x58
+/* MGBEB read client */
+#define TEGRA234_MEMORY_CLIENT_MGBEBRD 0x59
+/* MGBEC read client */
+#define TEGRA234_MEMORY_CLIENT_MGBECRD 0x5a
+/* MGBED read client */
+#define TEGRA234_MEMORY_CLIENT_MGBEDRD 0x5b
+/* MGBE0 write client */
+#define TEGRA234_MEMORY_CLIENT_MGBEAWR 0x5c
+/* MGBEB write client */
+#define TEGRA234_MEMORY_CLIENT_MGBEBWR 0x5f
+/* MGBEC write client */
+#define TEGRA234_MEMORY_CLIENT_MGBECWR 0x61
/* sdmmcd memory read client */
#define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63
+/* MGBED write client */
+#define TEGRA234_MEMORY_CLIENT_MGBEDWR 0x65
/* sdmmcd memory write client */
#define TEGRA234_MEMORY_CLIENT_SDMMCWAB 0x67
+#define TEGRA234_MEMORY_CLIENT_VICSRD 0x6c
+#define TEGRA234_MEMORY_CLIENT_VICSWR 0x6d
/* BPMP read client */
#define TEGRA234_MEMORY_CLIENT_BPMPR 0x93
/* BPMP write client */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#ifndef _DT_BINDINGS_PCS_RZN1_MIIC
+#define _DT_BINDINGS_PCS_RZN1_MIIC
+
+/*
+ * Reefer to the datasheet [1] section 8.2.1, Internal Connection of Ethernet
+ * Ports to check the available combination
+ *
+ * [1] REN_r01uh0750ej0140-rzn1-introduction_MAT_20210228.pdf
+ */
+
+#define MIIC_GMAC1_PORT 0
+#define MIIC_GMAC2_PORT 1
+#define MIIC_RTOS_PORT 2
+#define MIIC_SERCOS_PORTA 3
+#define MIIC_SERCOS_PORTB 4
+#define MIIC_ETHERCAT_PORTA 5
+#define MIIC_ETHERCAT_PORTB 6
+#define MIIC_ETHERCAT_PORTC 7
+#define MIIC_SWITCH_PORTA 8
+#define MIIC_SWITCH_PORTB 9
+#define MIIC_SWITCH_PORTC 10
+#define MIIC_SWITCH_PORTD 11
+#define MIIC_HSR_PORTA 12
+#define MIIC_HSR_PORTB 13
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+#ifndef _DT_BINDINGS_POWER_MT6795_POWER_H
+#define _DT_BINDINGS_POWER_MT6795_POWER_H
+
+#define MT6795_POWER_DOMAIN_MM 0
+#define MT6795_POWER_DOMAIN_VDEC 1
+#define MT6795_POWER_DOMAIN_VENC 2
+#define MT6795_POWER_DOMAIN_ISP 3
+#define MT6795_POWER_DOMAIN_MJC 4
+#define MT6795_POWER_DOMAIN_AUDIO 5
+#define MT6795_POWER_DOMAIN_MFG_ASYNC 6
+#define MT6795_POWER_DOMAIN_MFG_2D 7
+#define MT6795_POWER_DOMAIN_MFG 8
+#define MT6795_POWER_DOMAIN_MODEM 9
+
+#endif /* _DT_BINDINGS_POWER_MT6795_POWER_H */
#define MSM8916_VDDMX 3
#define MSM8916_VDDMX_AO 4
+/* MSM8909 Power Domain Indexes */
+#define MSM8909_VDDCX MSM8916_VDDCX
+#define MSM8909_VDDCX_AO MSM8916_VDDCX_AO
+#define MSM8909_VDDCX_VFC MSM8916_VDDCX_VFC
+#define MSM8909_VDDMX MSM8916_VDDMX
+#define MSM8909_VDDMX_AO MSM8916_VDDMX_AO
+
/* MSM8953 Power Domain Indexes */
#define MSM8953_VDDMD 0
#define MSM8953_VDDMD_AO 1
#define TEGRA234_POWER_DOMAIN_MGBEA 17U
#define TEGRA234_POWER_DOMAIN_MGBEB 18U
#define TEGRA234_POWER_DOMAIN_MGBEC 19U
+#define TEGRA234_POWER_DOMAIN_MGBED 20U
+#define TEGRA234_POWER_DOMAIN_VIC 29U
#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#ifndef _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+
+#define RST_SYSTEM 0
+#define RST_RTC 1
+#define RST_IOCTL 2
+#define RST_IOP 3
+#define RST_OTPRX 4
+#define RST_NOC 5
+#define RST_BR 6
+#define RST_RBUS_L00 7
+#define RST_SPIFL 8
+#define RST_SDCTRL0 9
+#define RST_PERI0 10
+#define RST_A926 11
+#define RST_UMCTL2 12
+#define RST_PERI1 13
+#define RST_DDR_PHY0 14
+#define RST_ACHIP 15
+#define RST_STC0 16
+#define RST_STC_AV0 17
+#define RST_STC_AV1 18
+#define RST_STC_AV2 19
+#define RST_UA0 20
+#define RST_UA1 21
+#define RST_UA2 22
+#define RST_UA3 23
+#define RST_UA4 24
+#define RST_HWUA 25
+#define RST_DDC0 26
+#define RST_UADMA 27
+#define RST_CBDMA0 28
+#define RST_CBDMA1 29
+#define RST_SPI_COMBO_0 30
+#define RST_SPI_COMBO_1 31
+#define RST_SPI_COMBO_2 32
+#define RST_SPI_COMBO_3 33
+#define RST_AUD 34
+#define RST_USBC0 35
+#define RST_USBC1 36
+#define RST_UPHY0 37
+#define RST_UPHY1 38
+#define RST_I2CM0 39
+#define RST_I2CM1 40
+#define RST_I2CM2 41
+#define RST_I2CM3 42
+#define RST_PMC 43
+#define RST_CARD_CTL0 44
+#define RST_CARD_CTL1 45
+#define RST_CARD_CTL4 46
+#define RST_BCH 47
+#define RST_DDFCH 48
+#define RST_CSIIW0 49
+#define RST_CSIIW1 50
+#define RST_MIPICSI0 51
+#define RST_MIPICSI1 52
+#define RST_HDMI_TX 53
+#define RST_VPOST 54
+#define RST_TGEN 55
+#define RST_DMIX 56
+#define RST_TCON 57
+#define RST_INTERRUPT 58
+#define RST_RGST 59
+#define RST_GPIO 60
+#define RST_RBUS_TOP 61
+#define RST_MAILBOX 62
+#define RST_SPIND 63
+#define RST_I2C2CBUS 64
+#define RST_SEC 65
+#define RST_DVE 66
+#define RST_GPOST0 67
+#define RST_OSD0 68
+#define RST_DISP_PWM 69
+#define RST_UADBG 70
+#define RST_DUMMY_MASTER 71
+#define RST_FIO_CTL 72
+#define RST_FPGA 73
+#define RST_L2SW 74
+#define RST_ICM 75
+#define RST_AXI_GLOBAL 76
+
+#endif
#define TEGRA234_RESET_PEX1_COMMON_APB 13U
#define TEGRA234_RESET_PEX2_CORE_7 14U
#define TEGRA234_RESET_PEX2_CORE_7_APB 15U
+#define TEGRA234_RESET_GPCDMA 18U
#define TEGRA234_RESET_HDA 20U
#define TEGRA234_RESET_HDACODEC 21U
#define TEGRA234_RESET_I2C1 24U
#define TEGRA234_RESET_I2C7 33U
#define TEGRA234_RESET_I2C8 34U
#define TEGRA234_RESET_I2C9 35U
+#define TEGRA234_RESET_MGBE0_PCS 45U
+#define TEGRA234_RESET_MGBE0_MAC 46U
+#define TEGRA234_RESET_MGBE1_PCS 49U
+#define TEGRA234_RESET_MGBE1_MAC 50U
+#define TEGRA234_RESET_MGBE2_PCS 53U
+#define TEGRA234_RESET_MGBE2_MAC 54U
#define TEGRA234_RESET_PEX2_CORE_10 56U
#define TEGRA234_RESET_PEX2_CORE_10_APB 57U
#define TEGRA234_RESET_PEX2_COMMON_APB 58U
#define TEGRA234_RESET_QSPI0 76U
#define TEGRA234_RESET_QSPI1 77U
#define TEGRA234_RESET_SDMMC4 85U
+#define TEGRA234_RESET_MGBE3_PCS 87U
+#define TEGRA234_RESET_MGBE3_MAC 88U
#define TEGRA234_RESET_UARTA 100U
+#define TEGRA234_RESET_VIC 113U
#define TEGRA234_RESET_PEX0_CORE_0 116U
#define TEGRA234_RESET_PEX0_CORE_1 117U
#define TEGRA234_RESET_PEX0_CORE_2 118U
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ * Author: Chanho Park <chanho61.park@samsung.com>
+ *
+ * Device Tree bindings for Samsung Boot Mode.
+ */
+
+#ifndef __DT_BINDINGS_SAMSUNG_BOOT_MODE_H
+#define __DT_BINDINGS_SAMSUNG_BOOT_MODE_H
+
+/* Boot mode definitions for Exynos Auto v9 SoC */
+
+#define EXYNOSAUTOV9_BOOT_FASTBOOT 0xfa
+#define EXYNOSAUTOV9_BOOT_BOOTLOADER 0xfc
+#define EXYNOSAUTOV9_BOOT_RECOVERY 0xff
+
+#endif /* __DT_BINDINGS_SAMSUNG_BOOT_MODE_H */
ACPI_IRQ_MODEL_IOSAPIC,
ACPI_IRQ_MODEL_PLATFORM,
ACPI_IRQ_MODEL_GIC,
+ ACPI_IRQ_MODEL_LPIC,
ACPI_IRQ_MODEL_COUNT
};
int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi);
void acpi_set_irq_model(enum acpi_irq_model_id model,
- struct fwnode_handle *fwnode);
+ struct fwnode_handle *(*)(u32));
+void acpi_set_gsi_to_irq_fallback(u32 (*)(u32));
struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags,
unsigned int size,
#include <linux/acpi.h>
#ifdef CONFIG_ACPI_VIOT
+void __init acpi_viot_early_init(void);
void __init acpi_viot_init(void);
int viot_iommu_configure(struct device *dev);
#else
+static inline void acpi_viot_early_init(void) {}
static inline void acpi_viot_init(void) {}
static inline int viot_iommu_configure(struct device *dev)
{
struct cgroup_base_stat {
struct task_cputime cputime;
+
+#ifdef CONFIG_SCHED_CORE
+ u64 forceidle_sum;
+#endif
};
/*
CPUHP_ZCOMP_PREPARE,
CPUHP_TIMERS_PREPARE,
CPUHP_MIPS_SOC_PREPARE,
- CPUHP_LOONGARCH_SOC_PREPARE,
CPUHP_BP_PREPARE_DYN,
CPUHP_BP_PREPARE_DYN_END = CPUHP_BP_PREPARE_DYN + 20,
CPUHP_BRINGUP_CPU,
CPUHP_AP_IRQ_BCM2836_STARTING,
CPUHP_AP_IRQ_MIPS_GIC_STARTING,
CPUHP_AP_IRQ_RISCV_STARTING,
+ CPUHP_AP_IRQ_LOONGARCH_STARTING,
CPUHP_AP_IRQ_SIFIVE_PLIC_STARTING,
CPUHP_AP_ARM_MVEBU_COHERENCY,
CPUHP_AP_MICROCODE_LOADER,
CPUHP_AP_PERF_ARM_HISI_PA_ONLINE,
CPUHP_AP_PERF_ARM_HISI_SLLC_ONLINE,
CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
+ CPUHP_AP_PERF_ARM_HNS3_PMU_ONLINE,
CPUHP_AP_PERF_ARM_L2X0_ONLINE,
CPUHP_AP_PERF_ARM_QCOM_L2_ONLINE,
CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
void *xattr_value,
size_t xattr_value_len,
struct integrity_iint_cache *iint);
-extern int evm_inode_setattr(struct dentry *dentry, struct iattr *attr);
+extern int evm_inode_setattr(struct user_namespace *mnt_userns,
+ struct dentry *dentry, struct iattr *attr);
extern void evm_inode_post_setattr(struct dentry *dentry, int ia_valid);
extern int evm_inode_setxattr(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *name,
}
#endif
-static inline int evm_inode_setattr(struct dentry *dentry, struct iattr *attr)
+static inline int evm_inode_setattr(struct user_namespace *mnt_userns,
+ struct dentry *dentry, struct iattr *attr)
{
return 0;
}
#define FANOTIFY_MARK_TYPE_BITS (FAN_MARK_INODE | FAN_MARK_MOUNT | \
FAN_MARK_FILESYSTEM)
+#define FANOTIFY_MARK_CMD_BITS (FAN_MARK_ADD | FAN_MARK_REMOVE | \
+ FAN_MARK_FLUSH)
+
+#define FANOTIFY_MARK_IGNORE_BITS (FAN_MARK_IGNORED_MASK | \
+ FAN_MARK_IGNORE)
+
#define FANOTIFY_MARK_FLAGS (FANOTIFY_MARK_TYPE_BITS | \
- FAN_MARK_ADD | \
- FAN_MARK_REMOVE | \
+ FANOTIFY_MARK_CMD_BITS | \
+ FANOTIFY_MARK_IGNORE_BITS | \
FAN_MARK_DONT_FOLLOW | \
FAN_MARK_ONLYDIR | \
- FAN_MARK_IGNORED_MASK | \
FAN_MARK_IGNORED_SURV_MODIFY | \
- FAN_MARK_EVICTABLE | \
- FAN_MARK_FLUSH)
+ FAN_MARK_EVICTABLE)
/*
* Events that can be reported with data type FSNOTIFY_EVENT_PATH.
#define PM_API_VERSION_2 2
/* ATF only commands */
+#define TF_A_PM_REGISTER_SGI 0xa04
#define PM_GET_TRUSTZONE_VERSION 0xa03
#define PM_SET_SUSPEND_MODE 0xa02
#define GET_CALLBACK_DATA 0xa01
int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id);
int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
+int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset);
#else
static inline int zynqmp_pm_get_api_version(u32 *version)
{
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
struct iattr {
unsigned int ia_valid;
umode_t ia_mode;
- kuid_t ia_uid;
- kgid_t ia_gid;
+ /*
+ * The two anonymous unions wrap structures with the same member.
+ *
+ * Filesystems raising FS_ALLOW_IDMAP need to use ia_vfs{g,u}id which
+ * are a dedicated type requiring the filesystem to use the dedicated
+ * helpers. Other filesystem can continue to use ia_{g,u}id until they
+ * have been ported.
+ *
+ * They always contain the same value. In other words FS_ALLOW_IDMAP
+ * pass down the same value on idmapped mounts as they would on regular
+ * mounts.
+ */
+ union {
+ kuid_t ia_uid;
+ vfsuid_t ia_vfsuid;
+ };
+ union {
+ kgid_t ia_gid;
+ vfsgid_t ia_vfsgid;
+ };
loff_t ia_size;
struct timespec64 ia_atime;
struct timespec64 ia_mtime;
* @mnt_userns: user namespace of the mount the inode was found from
* @inode: inode to map
*
+ * Note, this will eventually be removed completely in favor of the type-safe
+ * i_uid_into_vfsuid().
+ *
* Return: the inode's i_uid mapped down according to @mnt_userns.
* If the inode's i_uid has no mapping INVALID_UID is returned.
*/
static inline kuid_t i_uid_into_mnt(struct user_namespace *mnt_userns,
const struct inode *inode)
{
- return mapped_kuid_fs(mnt_userns, i_user_ns(inode), inode->i_uid);
+ return AS_KUIDT(make_vfsuid(mnt_userns, i_user_ns(inode), inode->i_uid));
+}
+
+/**
+ * i_uid_into_vfsuid - map an inode's i_uid down into a mnt_userns
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @inode: inode to map
+ *
+ * Return: whe inode's i_uid mapped down according to @mnt_userns.
+ * If the inode's i_uid has no mapping INVALID_VFSUID is returned.
+ */
+static inline vfsuid_t i_uid_into_vfsuid(struct user_namespace *mnt_userns,
+ const struct inode *inode)
+{
+ return make_vfsuid(mnt_userns, i_user_ns(inode), inode->i_uid);
+}
+
+/**
+ * i_uid_needs_update - check whether inode's i_uid needs to be updated
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @attr: the new attributes of @inode
+ * @inode: the inode to update
+ *
+ * Check whether the $inode's i_uid field needs to be updated taking idmapped
+ * mounts into account if the filesystem supports it.
+ *
+ * Return: true if @inode's i_uid field needs to be updated, false if not.
+ */
+static inline bool i_uid_needs_update(struct user_namespace *mnt_userns,
+ const struct iattr *attr,
+ const struct inode *inode)
+{
+ return ((attr->ia_valid & ATTR_UID) &&
+ !vfsuid_eq(attr->ia_vfsuid,
+ i_uid_into_vfsuid(mnt_userns, inode)));
+}
+
+/**
+ * i_uid_update - update @inode's i_uid field
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @attr: the new attributes of @inode
+ * @inode: the inode to update
+ *
+ * Safely update @inode's i_uid field translating the vfsuid of any idmapped
+ * mount into the filesystem kuid.
+ */
+static inline void i_uid_update(struct user_namespace *mnt_userns,
+ const struct iattr *attr,
+ struct inode *inode)
+{
+ if (attr->ia_valid & ATTR_UID)
+ inode->i_uid = from_vfsuid(mnt_userns, i_user_ns(inode),
+ attr->ia_vfsuid);
}
/**
* @mnt_userns: user namespace of the mount the inode was found from
* @inode: inode to map
*
+ * Note, this will eventually be removed completely in favor of the type-safe
+ * i_gid_into_vfsgid().
+ *
* Return: the inode's i_gid mapped down according to @mnt_userns.
* If the inode's i_gid has no mapping INVALID_GID is returned.
*/
static inline kgid_t i_gid_into_mnt(struct user_namespace *mnt_userns,
const struct inode *inode)
{
- return mapped_kgid_fs(mnt_userns, i_user_ns(inode), inode->i_gid);
+ return AS_KGIDT(make_vfsgid(mnt_userns, i_user_ns(inode), inode->i_gid));
+}
+
+/**
+ * i_gid_into_vfsgid - map an inode's i_gid down into a mnt_userns
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @inode: inode to map
+ *
+ * Return: the inode's i_gid mapped down according to @mnt_userns.
+ * If the inode's i_gid has no mapping INVALID_VFSGID is returned.
+ */
+static inline vfsgid_t i_gid_into_vfsgid(struct user_namespace *mnt_userns,
+ const struct inode *inode)
+{
+ return make_vfsgid(mnt_userns, i_user_ns(inode), inode->i_gid);
+}
+
+/**
+ * i_gid_needs_update - check whether inode's i_gid needs to be updated
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @attr: the new attributes of @inode
+ * @inode: the inode to update
+ *
+ * Check whether the $inode's i_gid field needs to be updated taking idmapped
+ * mounts into account if the filesystem supports it.
+ *
+ * Return: true if @inode's i_gid field needs to be updated, false if not.
+ */
+static inline bool i_gid_needs_update(struct user_namespace *mnt_userns,
+ const struct iattr *attr,
+ const struct inode *inode)
+{
+ return ((attr->ia_valid & ATTR_GID) &&
+ !vfsgid_eq(attr->ia_vfsgid,
+ i_gid_into_vfsgid(mnt_userns, inode)));
+}
+
+/**
+ * i_gid_update - update @inode's i_gid field
+ * @mnt_userns: user namespace of the mount the inode was found from
+ * @attr: the new attributes of @inode
+ * @inode: the inode to update
+ *
+ * Safely update @inode's i_gid field translating the vfsgid of any idmapped
+ * mount into the filesystem kgid.
+ */
+static inline void i_gid_update(struct user_namespace *mnt_userns,
+ const struct iattr *attr,
+ struct inode *inode)
+{
+ if (attr->ia_valid & ATTR_GID)
+ inode->i_gid = from_vfsgid(mnt_userns, i_user_ns(inode),
+ attr->ia_vfsgid);
}
/**
static inline bool HAS_UNMAPPED_ID(struct user_namespace *mnt_userns,
struct inode *inode)
{
- return !uid_valid(i_uid_into_mnt(mnt_userns, inode)) ||
- !gid_valid(i_gid_into_mnt(mnt_userns, inode));
+ return !vfsuid_valid(i_uid_into_vfsuid(mnt_userns, inode)) ||
+ !vfsgid_valid(i_gid_into_vfsgid(mnt_userns, inode));
}
static inline int iocb_flags(struct file *file);
struct hlist_node obj_list;
/* Head of list of marks for an object [mark ref] */
struct fsnotify_mark_connector *connector;
- /* Events types to ignore [mark->lock, group->mark_mutex] */
- __u32 ignored_mask;
+ /* Events types and flags to ignore [mark->lock, group->mark_mutex] */
+ __u32 ignore_mask;
/* General fsnotify mark flags */
#define FSNOTIFY_MARK_FLAG_ALIVE 0x0001
#define FSNOTIFY_MARK_FLAG_ATTACHED 0x0002
/* fanotify mark flags */
#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY 0x0100
#define FSNOTIFY_MARK_FLAG_NO_IREF 0x0200
+#define FSNOTIFY_MARK_FLAG_HAS_IGNORE_FLAGS 0x0400
unsigned int flags; /* flags [mark->lock] */
};
/* functions used to manipulate the marks attached to inodes */
-/* Get mask for calculating object interest taking ignored mask into account */
+/*
+ * Canonical "ignore mask" including event flags.
+ *
+ * Note the subtle semantic difference from the legacy ->ignored_mask.
+ * ->ignored_mask traditionally only meant which events should be ignored,
+ * while ->ignore_mask also includes flags regarding the type of objects on
+ * which events should be ignored.
+ */
+static inline __u32 fsnotify_ignore_mask(struct fsnotify_mark *mark)
+{
+ __u32 ignore_mask = mark->ignore_mask;
+
+ /* The event flags in ignore mask take effect */
+ if (mark->flags & FSNOTIFY_MARK_FLAG_HAS_IGNORE_FLAGS)
+ return ignore_mask;
+
+ /*
+ * Legacy behavior:
+ * - Always ignore events on dir
+ * - Ignore events on child if parent is watching children
+ */
+ ignore_mask |= FS_ISDIR;
+ ignore_mask &= ~FS_EVENT_ON_CHILD;
+ ignore_mask |= mark->mask & FS_EVENT_ON_CHILD;
+
+ return ignore_mask;
+}
+
+/* Legacy ignored_mask - only event types to ignore */
+static inline __u32 fsnotify_ignored_events(struct fsnotify_mark *mark)
+{
+ return mark->ignore_mask & ALL_FSNOTIFY_EVENTS;
+}
+
+/*
+ * Check if mask (or ignore mask) should be applied depending if victim is a
+ * directory and whether it is reported to a watching parent.
+ */
+static inline bool fsnotify_mask_applicable(__u32 mask, bool is_dir,
+ int iter_type)
+{
+ /* Should mask be applied to a directory? */
+ if (is_dir && !(mask & FS_ISDIR))
+ return false;
+
+ /* Should mask be applied to a child? */
+ if (iter_type == FSNOTIFY_ITER_TYPE_PARENT &&
+ !(mask & FS_EVENT_ON_CHILD))
+ return false;
+
+ return true;
+}
+
+/*
+ * Effective ignore mask taking into account if event victim is a
+ * directory and whether it is reported to a watching parent.
+ */
+static inline __u32 fsnotify_effective_ignore_mask(struct fsnotify_mark *mark,
+ bool is_dir, int iter_type)
+{
+ __u32 ignore_mask = fsnotify_ignored_events(mark);
+
+ if (!ignore_mask)
+ return 0;
+
+ /* For non-dir and non-child, no need to consult the event flags */
+ if (!is_dir && iter_type != FSNOTIFY_ITER_TYPE_PARENT)
+ return ignore_mask;
+
+ ignore_mask = fsnotify_ignore_mask(mark);
+ if (!fsnotify_mask_applicable(ignore_mask, is_dir, iter_type))
+ return 0;
+
+ return ignore_mask & ALL_FSNOTIFY_EVENTS;
+}
+
+/* Get mask for calculating object interest taking ignore mask into account */
static inline __u32 fsnotify_calc_mask(struct fsnotify_mark *mark)
{
__u32 mask = mark->mask;
- if (!mark->ignored_mask)
+ if (!fsnotify_ignored_events(mark))
return mask;
- /* Interest in FS_MODIFY may be needed for clearing ignored mask */
+ /* Interest in FS_MODIFY may be needed for clearing ignore mask */
if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
mask |= FS_MODIFY;
* If mark is interested in ignoring events on children, the object must
* show interest in those events for fsnotify_parent() to notice it.
*/
- return mask | (mark->ignored_mask & ALL_FSNOTIFY_EVENTS);
+ return mask | mark->ignore_mask;
}
/* Get mask of events for a list of marks */
#define GFP_DMA32 __GFP_DMA32
#define GFP_HIGHUSER (GFP_USER | __GFP_HIGHMEM)
#define GFP_HIGHUSER_MOVABLE (GFP_HIGHUSER | __GFP_MOVABLE | \
- __GFP_SKIP_KASAN_POISON)
+ __GFP_SKIP_KASAN_POISON | __GFP_SKIP_KASAN_UNPOISON)
#define GFP_TRANSHUGE_LIGHT ((GFP_HIGHUSER_MOVABLE | __GFP_COMP | \
__GFP_NOMEMALLOC | __GFP_NOWARN) & ~__GFP_RECLAIM)
#define GFP_TRANSHUGE (GFP_TRANSHUGE_LIGHT | __GFP_DIRECT_RECLAIM)
#include <linux/property.h>
#include <linux/types.h>
+#include <asm/msi.h>
+
struct gpio_desc;
struct of_phandle_args;
struct device_node;
struct gpio_chip;
+union gpio_irq_fwspec {
+ struct irq_fwspec fwspec;
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+ msi_alloc_info_t msiinfo;
+#endif
+};
+
#define GPIO_LINE_DIRECTION_IN 1
#define GPIO_LINE_DIRECTION_OUT 0
* variant named &gpiochip_populate_parent_fwspec_fourcell is also
* available.
*/
- void *(*populate_parent_alloc_arg)(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type);
+ int (*populate_parent_alloc_arg)(struct gpio_chip *gc,
+ union gpio_irq_fwspec *fwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type);
/**
* @child_offset_to_irq:
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
-void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
+int gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type);
+int gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
+ union gpio_irq_fwspec *gfwspec,
unsigned int parent_hwirq,
unsigned int parent_type);
-void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type);
-
-#else
-
-static inline void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type)
-{
- return NULL;
-}
-
-static inline void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
- unsigned int parent_hwirq,
- unsigned int parent_type)
-{
- return NULL;
-}
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
return split_huge_page_to_list(&folio->page, list);
}
+/*
+ * archs that select ARCH_WANTS_THP_SWAP but don't support THP_SWP due to
+ * limitations in the implementation like arm64 MTE can override this to
+ * false
+ */
+#ifndef arch_thp_swp_supported
+static inline bool arch_thp_swp_supported(void)
+{
+ return true;
+}
+#endif
+
#endif /* _LINUX_HUGE_MM_H */
#endif /* CONFIG_IMA */
+#ifdef CONFIG_HAVE_IMA_KEXEC
+int __init ima_free_kexec_buffer(void);
+int __init ima_get_kexec_buffer(void **addr, size_t *size);
+#endif
+
#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
extern bool arch_ima_get_secureboot(void);
extern const char * const *arch_get_ima_policy(void);
#endif
void *handler_data;
struct msi_desc *msi_desc;
+#ifdef CONFIG_SMP
cpumask_var_t affinity;
+#endif
#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
cpumask_var_t effective_affinity;
#endif
return irq_common_data_get_node(d->common);
}
-static inline struct cpumask *irq_get_affinity_mask(int irq)
+static inline
+const struct cpumask *irq_data_get_affinity_mask(struct irq_data *d)
{
- struct irq_data *d = irq_get_irq_data(irq);
+#ifdef CONFIG_SMP
+ return d->common->affinity;
+#else
+ return cpumask_of(0);
+#endif
+}
- return d ? d->common->affinity : NULL;
+static inline void irq_data_update_affinity(struct irq_data *d,
+ const struct cpumask *m)
+{
+#ifdef CONFIG_SMP
+ cpumask_copy(d->common->affinity, m);
+#endif
}
-static inline struct cpumask *irq_data_get_affinity_mask(struct irq_data *d)
+static inline const struct cpumask *irq_get_affinity_mask(int irq)
{
- return d->common->affinity;
+ struct irq_data *d = irq_get_irq_data(irq);
+
+ return d ? irq_data_get_affinity_mask(d) : NULL;
}
#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
static inline
-struct cpumask *irq_data_get_effective_affinity_mask(struct irq_data *d)
+const struct cpumask *irq_data_get_effective_affinity_mask(struct irq_data *d)
{
return d->common->effective_affinity;
}
{
}
static inline
-struct cpumask *irq_data_get_effective_affinity_mask(struct irq_data *d)
+const struct cpumask *irq_data_get_effective_affinity_mask(struct irq_data *d)
{
- return d->common->affinity;
+ return irq_data_get_affinity_mask(d);
}
#endif
-static inline struct cpumask *irq_get_effective_affinity_mask(unsigned int irq)
+static inline
+const struct cpumask *irq_get_effective_affinity_mask(unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
/* Setup functions for irq_chip_generic */
int irq_map_generic_chip(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw_irq);
+void irq_unmap_generic_chip(struct irq_domain *d, unsigned int virq);
struct irq_chip_generic *
irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
void __iomem *reg_base, irq_flow_handler_t handler);
extern struct irq_chip icu_irq_chip;
+extern void icu_init_irq(void);
+extern void mmp2_init_icu(void);
+
#endif /* __IRQCHIP_MMP_H */
* Must be called with irq_desc locked and valid parameters.
*/
static inline void
-irq_set_chip_handler_name_locked(struct irq_data *data, struct irq_chip *chip,
+irq_set_chip_handler_name_locked(struct irq_data *data,
+ const struct irq_chip *chip,
irq_flow_handler_t handler, const char *name)
{
struct irq_desc *desc = irq_data_to_desc(data);
desc->handle_irq = handler;
desc->name = name;
- data->chip = chip;
+ data->chip = (struct irq_chip *)chip;
}
bool irq_check_status_bit(unsigned int irq, unsigned int bitmask);
extern void jump_label_unlock(void);
extern void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type);
-extern void arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type);
extern bool arch_jump_label_transform_queue(struct jump_entry *entry,
enum jump_label_type type);
extern void arch_jump_label_transform_apply(void);
extern void static_key_slow_dec(struct static_key *key);
extern void static_key_slow_inc_cpuslocked(struct static_key *key);
extern void static_key_slow_dec_cpuslocked(struct static_key *key);
-extern void jump_label_apply_nops(struct module *mod);
extern int static_key_count(struct static_key *key);
extern void static_key_enable(struct static_key *key);
extern void static_key_disable(struct static_key *key);
extern void static_key_enable_cpuslocked(struct static_key *key);
extern void static_key_disable_cpuslocked(struct static_key *key);
+extern enum jump_label_type jump_label_init_type(struct jump_entry *entry);
/*
* We should be using ATOMIC_INIT() for initializing .enabled, but
static inline void jump_label_lock(void) {}
static inline void jump_label_unlock(void) {}
-static inline int jump_label_apply_nops(struct module *mod)
-{
- return 0;
-}
-
static inline void static_key_enable(struct static_key *key)
{
STATIC_KEY_CHECK_USE(key);
CPUTIME_STEAL,
CPUTIME_GUEST,
CPUTIME_GUEST_NICE,
+#ifdef CONFIG_SCHED_CORE
+ CPUTIME_FORCEIDLE,
+#endif
NR_STATS,
};
extern void account_idle_ticks(unsigned long ticks);
+#ifdef CONFIG_SCHED_CORE
+extern void __account_forceidle_time(struct task_struct *tsk, u64 delta);
+#endif
+
#endif /* _LINUX_KERNEL_STAT_H */
lockdep_init_map_waits(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, int subclass, u8 inner, u8 outer)
{
- lockdep_init_map_type(lock, name, key, subclass, inner, LD_WAIT_INV, LD_LOCK_NORMAL);
+ lockdep_init_map_type(lock, name, key, subclass, inner, outer, LD_LOCK_NORMAL);
}
static inline void
* or they are too narrow (they suffer from a false class-split):
*/
#define lockdep_set_class(lock, key) \
- lockdep_init_map_waits(&(lock)->dep_map, #key, key, 0, \
- (lock)->dep_map.wait_type_inner, \
- (lock)->dep_map.wait_type_outer)
+ lockdep_init_map_type(&(lock)->dep_map, #key, key, 0, \
+ (lock)->dep_map.wait_type_inner, \
+ (lock)->dep_map.wait_type_outer, \
+ (lock)->dep_map.lock_type)
#define lockdep_set_class_and_name(lock, key, name) \
- lockdep_init_map_waits(&(lock)->dep_map, name, key, 0, \
- (lock)->dep_map.wait_type_inner, \
- (lock)->dep_map.wait_type_outer)
+ lockdep_init_map_type(&(lock)->dep_map, name, key, 0, \
+ (lock)->dep_map.wait_type_inner, \
+ (lock)->dep_map.wait_type_outer, \
+ (lock)->dep_map.lock_type)
#define lockdep_set_class_and_subclass(lock, key, sub) \
- lockdep_init_map_waits(&(lock)->dep_map, #key, key, sub,\
- (lock)->dep_map.wait_type_inner, \
- (lock)->dep_map.wait_type_outer)
+ lockdep_init_map_type(&(lock)->dep_map, #key, key, sub, \
+ (lock)->dep_map.wait_type_inner, \
+ (lock)->dep_map.wait_type_outer, \
+ (lock)->dep_map.lock_type)
#define lockdep_set_subclass(lock, sub) \
- lockdep_init_map_waits(&(lock)->dep_map, #lock, (lock)->dep_map.key, sub,\
- (lock)->dep_map.wait_type_inner, \
- (lock)->dep_map.wait_type_outer)
+ lockdep_init_map_type(&(lock)->dep_map, #lock, (lock)->dep_map.key, sub,\
+ (lock)->dep_map.wait_type_inner, \
+ (lock)->dep_map.wait_type_outer, \
+ (lock)->dep_map.lock_type)
#define lockdep_set_novalidate_class(lock) \
lockdep_set_class_and_name(lock, &__lockdep_no_validate__, #lock)
struct device *dev;
void __iomem *base;
void __iomem *asb;
+ void __iomem *rpivid_asb;
};
#endif /* BCM2835_MFD_PM_H */
#if defined(CONFIG_ZONE_DEVICE) && defined(CONFIG_FS_DAX)
DECLARE_STATIC_KEY_FALSE(devmap_managed_key);
-bool __put_devmap_managed_page(struct page *page);
-static inline bool put_devmap_managed_page(struct page *page)
+bool __put_devmap_managed_page_refs(struct page *page, int refs);
+static inline bool put_devmap_managed_page_refs(struct page *page, int refs)
{
if (!static_branch_unlikely(&devmap_managed_key))
return false;
if (!is_zone_device_page(page))
return false;
- return __put_devmap_managed_page(page);
+ return __put_devmap_managed_page_refs(page, refs);
}
-
#else /* CONFIG_ZONE_DEVICE && CONFIG_FS_DAX */
-static inline bool put_devmap_managed_page(struct page *page)
+static inline bool put_devmap_managed_page_refs(struct page *page, int refs)
{
return false;
}
#endif /* CONFIG_ZONE_DEVICE && CONFIG_FS_DAX */
+static inline bool put_devmap_managed_page(struct page *page)
+{
+ return put_devmap_managed_page_refs(page, 1);
+}
+
/* 127: arbitrary random number, small enough to assemble well */
#define folio_ref_zero_or_close_to_overflow(folio) \
((unsigned int) folio_ref_count(folio) + 127u <= 127u)
*/
extern struct user_namespace init_user_ns;
+typedef struct {
+ uid_t val;
+} vfsuid_t;
+
+typedef struct {
+ gid_t val;
+} vfsgid_t;
+
+static_assert(sizeof(vfsuid_t) == sizeof(kuid_t));
+static_assert(sizeof(vfsgid_t) == sizeof(kgid_t));
+static_assert(offsetof(vfsuid_t, val) == offsetof(kuid_t, val));
+static_assert(offsetof(vfsgid_t, val) == offsetof(kgid_t, val));
+
+#ifdef CONFIG_MULTIUSER
+static inline uid_t __vfsuid_val(vfsuid_t uid)
+{
+ return uid.val;
+}
+
+static inline gid_t __vfsgid_val(vfsgid_t gid)
+{
+ return gid.val;
+}
+#else
+static inline uid_t __vfsuid_val(vfsuid_t uid)
+{
+ return 0;
+}
+
+static inline gid_t __vfsgid_val(vfsgid_t gid)
+{
+ return 0;
+}
+#endif
+
+static inline bool vfsuid_valid(vfsuid_t uid)
+{
+ return __vfsuid_val(uid) != (uid_t)-1;
+}
+
+static inline bool vfsgid_valid(vfsgid_t gid)
+{
+ return __vfsgid_val(gid) != (gid_t)-1;
+}
+
+static inline bool vfsuid_eq(vfsuid_t left, vfsuid_t right)
+{
+ return vfsuid_valid(left) && __vfsuid_val(left) == __vfsuid_val(right);
+}
+
+static inline bool vfsgid_eq(vfsgid_t left, vfsgid_t right)
+{
+ return vfsgid_valid(left) && __vfsgid_val(left) == __vfsgid_val(right);
+}
+
+/**
+ * vfsuid_eq_kuid - check whether kuid and vfsuid have the same value
+ * @vfsuid: the vfsuid to compare
+ * @kuid: the kuid to compare
+ *
+ * Check whether @vfsuid and @kuid have the same values.
+ *
+ * Return: true if @vfsuid and @kuid have the same value, false if not.
+ * Comparison between two invalid uids returns false.
+ */
+static inline bool vfsuid_eq_kuid(vfsuid_t vfsuid, kuid_t kuid)
+{
+ return vfsuid_valid(vfsuid) && __vfsuid_val(vfsuid) == __kuid_val(kuid);
+}
+
+/**
+ * vfsgid_eq_kgid - check whether kgid and vfsgid have the same value
+ * @vfsgid: the vfsgid to compare
+ * @kgid: the kgid to compare
+ *
+ * Check whether @vfsgid and @kgid have the same values.
+ *
+ * Return: true if @vfsgid and @kgid have the same value, false if not.
+ * Comparison between two invalid gids returns false.
+ */
+static inline bool vfsgid_eq_kgid(vfsgid_t vfsgid, kgid_t kgid)
+{
+ return vfsgid_valid(vfsgid) && __vfsgid_val(vfsgid) == __kgid_val(kgid);
+}
+
+/*
+ * vfs{g,u}ids are created from k{g,u}ids.
+ * We don't allow them to be created from regular {u,g}id.
+ */
+#define VFSUIDT_INIT(val) (vfsuid_t){ __kuid_val(val) }
+#define VFSGIDT_INIT(val) (vfsgid_t){ __kgid_val(val) }
+
+#define INVALID_VFSUID VFSUIDT_INIT(INVALID_UID)
+#define INVALID_VFSGID VFSGIDT_INIT(INVALID_GID)
+
+/*
+ * Allow a vfs{g,u}id to be used as a k{g,u}id where we want to compare
+ * whether the mapped value is identical to value of a k{g,u}id.
+ */
+#define AS_KUIDT(val) (kuid_t){ __vfsuid_val(val) }
+#define AS_KGIDT(val) (kgid_t){ __vfsgid_val(val) }
+
+#ifdef CONFIG_MULTIUSER
+/**
+ * vfsgid_in_group_p() - check whether a vfsuid matches the caller's groups
+ * @vfsgid: the mnt gid to match
+ *
+ * This function can be used to determine whether @vfsuid matches any of the
+ * caller's groups.
+ *
+ * Return: 1 if vfsuid matches caller's groups, 0 if not.
+ */
+static inline int vfsgid_in_group_p(vfsgid_t vfsgid)
+{
+ return in_group_p(AS_KGIDT(vfsgid));
+}
+#else
+static inline int vfsgid_in_group_p(vfsgid_t vfsgid)
+{
+ return 1;
+}
+#endif
+
/**
* initial_idmapping - check whether this is the initial mapping
* @ns: idmapping to check
}
/**
- * mapped_kuid_fs - map a filesystem kuid into a mnt_userns
+ * make_vfsuid - map a filesystem kuid into a mnt_userns
* @mnt_userns: the mount's idmapping
* @fs_userns: the filesystem's idmapping
* @kuid : kuid to be mapped
* If @kuid has no mapping in either @mnt_userns or @fs_userns INVALID_UID is
* returned.
*/
-static inline kuid_t mapped_kuid_fs(struct user_namespace *mnt_userns,
- struct user_namespace *fs_userns,
- kuid_t kuid)
+
+static inline vfsuid_t make_vfsuid(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ kuid_t kuid)
{
uid_t uid;
if (no_idmapping(mnt_userns, fs_userns))
- return kuid;
+ return VFSUIDT_INIT(kuid);
if (initial_idmapping(fs_userns))
uid = __kuid_val(kuid);
else
uid = from_kuid(fs_userns, kuid);
if (uid == (uid_t)-1)
- return INVALID_UID;
- return make_kuid(mnt_userns, uid);
+ return INVALID_VFSUID;
+ return VFSUIDT_INIT(make_kuid(mnt_userns, uid));
+}
+
+static inline kuid_t mapped_kuid_fs(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ kuid_t kuid)
+{
+ return AS_KUIDT(make_vfsuid(mnt_userns, fs_userns, kuid));
}
/**
- * mapped_kgid_fs - map a filesystem kgid into a mnt_userns
+ * make_vfsgid - map a filesystem kgid into a mnt_userns
* @mnt_userns: the mount's idmapping
* @fs_userns: the filesystem's idmapping
* @kgid : kgid to be mapped
* If @kgid has no mapping in either @mnt_userns or @fs_userns INVALID_GID is
* returned.
*/
-static inline kgid_t mapped_kgid_fs(struct user_namespace *mnt_userns,
- struct user_namespace *fs_userns,
- kgid_t kgid)
+
+static inline vfsgid_t make_vfsgid(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ kgid_t kgid)
{
gid_t gid;
if (no_idmapping(mnt_userns, fs_userns))
- return kgid;
+ return VFSGIDT_INIT(kgid);
if (initial_idmapping(fs_userns))
gid = __kgid_val(kgid);
else
gid = from_kgid(fs_userns, kgid);
if (gid == (gid_t)-1)
- return INVALID_GID;
- return make_kgid(mnt_userns, gid);
+ return INVALID_VFSGID;
+ return VFSGIDT_INIT(make_kgid(mnt_userns, gid));
+}
+
+static inline kgid_t mapped_kgid_fs(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ kgid_t kgid)
+{
+ return AS_KGIDT(make_vfsgid(mnt_userns, fs_userns, kgid));
+}
+
+/**
+ * from_vfsuid - map a vfsuid into the filesystem idmapping
+ * @mnt_userns: the mount's idmapping
+ * @fs_userns: the filesystem's idmapping
+ * @vfsuid : vfsuid to be mapped
+ *
+ * Map @vfsuid into the filesystem idmapping. This function has to be used in
+ * order to e.g. write @vfsuid to inode->i_uid.
+ *
+ * Return: @vfsuid mapped into the filesystem idmapping
+ */
+static inline kuid_t from_vfsuid(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ vfsuid_t vfsuid)
+{
+ uid_t uid;
+
+ if (no_idmapping(mnt_userns, fs_userns))
+ return AS_KUIDT(vfsuid);
+ uid = from_kuid(mnt_userns, AS_KUIDT(vfsuid));
+ if (uid == (uid_t)-1)
+ return INVALID_UID;
+ if (initial_idmapping(fs_userns))
+ return KUIDT_INIT(uid);
+ return make_kuid(fs_userns, uid);
}
/**
struct user_namespace *fs_userns,
kuid_t kuid)
{
- uid_t uid;
+ return from_vfsuid(mnt_userns, fs_userns, VFSUIDT_INIT(kuid));
+}
+
+/**
+ * vfsuid_has_fsmapping - check whether a vfsuid maps into the filesystem
+ * @mnt_userns: the mount's idmapping
+ * @fs_userns: the filesystem's idmapping
+ * @vfsuid: vfsuid to be mapped
+ *
+ * Check whether @vfsuid has a mapping in the filesystem idmapping. Use this
+ * function to check whether the filesystem idmapping has a mapping for
+ * @vfsuid.
+ *
+ * Return: true if @vfsuid has a mapping in the filesystem, false if not.
+ */
+static inline bool vfsuid_has_fsmapping(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ vfsuid_t vfsuid)
+{
+ return uid_valid(from_vfsuid(mnt_userns, fs_userns, vfsuid));
+}
+
+/**
+ * vfsuid_into_kuid - convert vfsuid into kuid
+ * @vfsuid: the vfsuid to convert
+ *
+ * This can be used when a vfsuid is committed as a kuid.
+ *
+ * Return: a kuid with the value of @vfsuid
+ */
+static inline kuid_t vfsuid_into_kuid(vfsuid_t vfsuid)
+{
+ return AS_KUIDT(vfsuid);
+}
+
+/**
+ * from_vfsgid - map a vfsgid into the filesystem idmapping
+ * @mnt_userns: the mount's idmapping
+ * @fs_userns: the filesystem's idmapping
+ * @vfsgid : vfsgid to be mapped
+ *
+ * Map @vfsgid into the filesystem idmapping. This function has to be used in
+ * order to e.g. write @vfsgid to inode->i_gid.
+ *
+ * Return: @vfsgid mapped into the filesystem idmapping
+ */
+static inline kgid_t from_vfsgid(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ vfsgid_t vfsgid)
+{
+ gid_t gid;
if (no_idmapping(mnt_userns, fs_userns))
- return kuid;
- uid = from_kuid(mnt_userns, kuid);
- if (uid == (uid_t)-1)
- return INVALID_UID;
+ return AS_KGIDT(vfsgid);
+ gid = from_kgid(mnt_userns, AS_KGIDT(vfsgid));
+ if (gid == (gid_t)-1)
+ return INVALID_GID;
if (initial_idmapping(fs_userns))
- return KUIDT_INIT(uid);
- return make_kuid(fs_userns, uid);
+ return KGIDT_INIT(gid);
+ return make_kgid(fs_userns, gid);
}
/**
struct user_namespace *fs_userns,
kgid_t kgid)
{
- gid_t gid;
+ return from_vfsgid(mnt_userns, fs_userns, VFSGIDT_INIT(kgid));
+}
- if (no_idmapping(mnt_userns, fs_userns))
- return kgid;
- gid = from_kgid(mnt_userns, kgid);
- if (gid == (gid_t)-1)
- return INVALID_GID;
- if (initial_idmapping(fs_userns))
- return KGIDT_INIT(gid);
- return make_kgid(fs_userns, gid);
+/**
+ * vfsgid_has_fsmapping - check whether a vfsgid maps into the filesystem
+ * @mnt_userns: the mount's idmapping
+ * @fs_userns: the filesystem's idmapping
+ * @vfsgid: vfsgid to be mapped
+ *
+ * Check whether @vfsgid has a mapping in the filesystem idmapping. Use this
+ * function to check whether the filesystem idmapping has a mapping for
+ * @vfsgid.
+ *
+ * Return: true if @vfsgid has a mapping in the filesystem, false if not.
+ */
+static inline bool vfsgid_has_fsmapping(struct user_namespace *mnt_userns,
+ struct user_namespace *fs_userns,
+ vfsgid_t vfsgid)
+{
+ return gid_valid(from_vfsgid(mnt_userns, fs_userns, vfsgid));
+}
+
+/**
+ * vfsgid_into_kgid - convert vfsgid into kgid
+ * @vfsgid: the vfsgid to convert
+ *
+ * This can be used when a vfsgid is committed as a kgid.
+ *
+ * Return: a kgid with the value of @vfsgid
+ */
+static inline kgid_t vfsgid_into_kgid(vfsgid_t vfsgid)
+{
+ return AS_KGIDT(vfsgid);
}
/**
static inline kuid_t mapped_fsuid(struct user_namespace *mnt_userns,
struct user_namespace *fs_userns)
{
- return mapped_kuid_user(mnt_userns, fs_userns, current_fsuid());
+ return from_vfsuid(mnt_userns, fs_userns,
+ VFSUIDT_INIT(current_fsuid()));
}
/**
static inline kgid_t mapped_fsgid(struct user_namespace *mnt_userns,
struct user_namespace *fs_userns)
{
- return mapped_kgid_user(mnt_userns, fs_userns, current_fsgid());
+ return from_vfsgid(mnt_userns, fs_userns,
+ VFSGIDT_INIT(current_fsgid()));
}
#endif /* _LINUX_MNT_IDMAPPING_H */
unsigned long initrd_load_addr,
unsigned long initrd_len,
const char *cmdline, size_t extra_fdt_size);
-int ima_get_kexec_buffer(void **addr, size_t *size);
-int ima_free_kexec_buffer(void);
#else /* CONFIG_OF */
static inline void of_core_init(void)
*/
#define DO_ONCE_LITE(func, ...) \
DO_ONCE_LITE_IF(true, func, ##__VA_ARGS__)
-#define DO_ONCE_LITE_IF(condition, func, ...) \
+
+#define __ONCE_LITE_IF(condition) \
({ \
static bool __section(".data.once") __already_done; \
- bool __ret_do_once = !!(condition); \
+ bool __ret_cond = !!(condition); \
+ bool __ret_once = false; \
\
- if (unlikely(__ret_do_once && !__already_done)) { \
+ if (unlikely(__ret_cond && !__already_done)) { \
__already_done = true; \
- func(__VA_ARGS__); \
+ __ret_once = true; \
} \
+ unlikely(__ret_once); \
+ })
+
+#define DO_ONCE_LITE_IF(condition, func, ...) \
+ ({ \
+ bool __ret_do_once = !!(condition); \
+ \
+ if (__ONCE_LITE_IF(__ret_do_once)) \
+ func(__VA_ARGS__); \
+ \
unlikely(__ret_do_once); \
})
#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b
#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
+#define PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3 0x1727
#define PCI_DEVICE_ID_AMD_19H_DF_F3 0x1653
#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F3 0x14b0
#define PCI_DEVICE_ID_AMD_19H_M40H_DF_F3 0x167c
#define PCI_DEVICE_ID_AMD_19H_M50H_DF_F3 0x166d
+#define PCI_DEVICE_ID_AMD_19H_M60H_DF_F3 0x14e3
+#define PCI_DEVICE_ID_AMD_19H_M70H_DF_F3 0x14f3
#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
struct cpu_hw_events __percpu *hw_events;
struct hlist_node node;
+ struct notifier_block riscv_pm_nb;
};
#define to_riscv_pmu(p) (container_of(p, struct riscv_pmu, pmu))
+
+void riscv_pmu_start(struct perf_event *event, int flags);
+void riscv_pmu_stop(struct perf_event *event, int flags);
unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
int riscv_pmu_event_set_period(struct perf_event *event);
uint64_t riscv_pmu_ctr_get_width_mask(struct perf_event *event);
struct pid_namespace *ns;
u64 id;
+ atomic64_t lost_samples;
+
u64 (*clock)(void);
perf_overflow_handler_t overflow_handler;
void *overflow_handler_context;
struct posix_acl *);
struct posix_acl *get_cached_acl_rcu(struct inode *inode, int type);
+struct posix_acl *posix_acl_clone(const struct posix_acl *acl, gfp_t flags);
#ifdef CONFIG_FS_POSIX_ACL
int posix_acl_chmod(struct user_namespace *, struct inode *, umode_t);
}
#ifdef CONFIG_FS_POSIX_ACL
-void posix_acl_fix_xattr_from_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size);
-void posix_acl_fix_xattr_to_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size);
+void posix_acl_fix_xattr_from_user(void *value, size_t size);
+void posix_acl_fix_xattr_to_user(void *value, size_t size);
+void posix_acl_getxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode,
+ void *value, size_t size);
+void posix_acl_setxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode,
+ void *value, size_t size);
#else
-static inline void posix_acl_fix_xattr_from_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size)
+static inline void posix_acl_fix_xattr_from_user(void *value, size_t size)
{
}
-static inline void posix_acl_fix_xattr_to_user(struct user_namespace *mnt_userns,
- struct inode *inode,
- void *value, size_t size)
+static inline void posix_acl_fix_xattr_to_user(void *value, size_t size)
+{
+}
+static inline void
+posix_acl_getxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode, void *value,
+ size_t size)
+{
+}
+static inline void
+posix_acl_setxattr_idmapped_mnt(struct user_namespace *mnt_userns,
+ const struct inode *inode, void *value,
+ size_t size)
{
}
#endif
#include <linux/mutex.h>
#include <linux/of.h>
-struct pwm_capture;
-struct seq_file;
-
struct pwm_chip;
/**
return 0;
}
+/**
+ * struct pwm_capture - PWM capture data
+ * @period: period of the PWM signal (in nanoseconds)
+ * @duty_cycle: duty cycle of the PWM signal (in nanoseconds)
+ */
+struct pwm_capture {
+ unsigned int period;
+ unsigned int duty_cycle;
+};
+
/**
* struct pwm_ops - PWM controller operations
* @request: optional hook for requesting a PWM
* called once per PWM device when the PWM chip is
* registered.
* @owner: helps prevent removal of modules exporting active PWMs
- * @config: configure duty cycles and period length for this PWM
- * @set_polarity: configure the polarity of this PWM
- * @enable: enable PWM output toggling
- * @disable: disable PWM output toggling
*/
struct pwm_ops {
int (*request)(struct pwm_chip *chip, struct pwm_device *pwm);
void (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state);
struct module *owner;
-
- /* Only used by legacy drivers */
- int (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns);
- int (*set_polarity)(struct pwm_chip *chip, struct pwm_device *pwm,
- enum pwm_polarity polarity);
- int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
- void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
};
/**
struct pwm_device *pwms;
};
-/**
- * struct pwm_capture - PWM capture data
- * @period: period of the PWM signal (in nanoseconds)
- * @duty_cycle: duty cycle of the PWM signal (in nanoseconds)
- */
-struct pwm_capture {
- unsigned int period;
- unsigned int duty_cycle;
-};
-
#if IS_ENABLED(CONFIG_PWM)
/* PWM user APIs */
struct pwm_device *pwm_request(int pwm_id, const char *label);
}
/* i_mutex must being held */
-static inline bool is_quota_modification(struct inode *inode, struct iattr *ia)
+static inline bool is_quota_modification(struct user_namespace *mnt_userns,
+ struct inode *inode, struct iattr *ia)
{
- return (ia->ia_valid & ATTR_SIZE) ||
- (ia->ia_valid & ATTR_UID && !uid_eq(ia->ia_uid, inode->i_uid)) ||
- (ia->ia_valid & ATTR_GID && !gid_eq(ia->ia_gid, inode->i_gid));
+ return ((ia->ia_valid & ATTR_SIZE) ||
+ i_uid_needs_update(mnt_userns, ia, inode) ||
+ i_gid_needs_update(mnt_userns, ia, inode));
}
#if defined(CONFIG_QUOTA)
struct qc_dqblk *di);
int __dquot_transfer(struct inode *inode, struct dquot **transfer_to);
-int dquot_transfer(struct inode *inode, struct iattr *iattr);
+int dquot_transfer(struct user_namespace *mnt_userns, struct inode *inode,
+ struct iattr *iattr);
static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
{
{
}
-static inline int dquot_transfer(struct inode *inode, struct iattr *iattr)
+static inline int dquot_transfer(struct user_namespace *mnt_userns,
+ struct inode *inode, struct iattr *iattr)
{
return 0;
}
NULL, false, false);
}
+static inline int regmap_field_set_bits(struct regmap_field *field,
+ unsigned int bits)
+{
+ return regmap_field_update_bits_base(field, bits, bits, NULL, false,
+ false);
+}
+
+static inline int regmap_field_clear_bits(struct regmap_field *field,
+ unsigned int bits)
+{
+ return regmap_field_update_bits_base(field, bits, 0, NULL, false,
+ false);
+}
+
+int regmap_field_test_bits(struct regmap_field *field, unsigned int bits);
+
static inline int
regmap_field_force_update_bits(struct regmap_field *field,
unsigned int mask, unsigned int val)
unsigned int *offset;
};
+struct regmap_irq_chip_data;
+
/**
* struct regmap_irq_chip - Description of a generic regmap irq_chip.
*
* main_status set.
*
* @status_base: Base status register address.
- * @mask_base: Base mask register address.
- * @mask_writeonly: Base mask register is write only.
- * @unmask_base: Base unmask register address. for chips who have
- * separate mask and unmask registers
+ * @mask_base: Base mask register address. Mask bits are set to 1 when an
+ * interrupt is masked, 0 when unmasked.
+ * @unmask_base: Base unmask register address. Unmask bits are set to 1 when
+ * an interrupt is unmasked and 0 when masked.
* @ack_base: Base ack address. If zero then the chip is clear on read.
* Using zero value is possible with @use_ack bit.
* @wake_base: Base address for wake enables. If zero unsupported.
- * @type_base: Base address for irq type. If zero unsupported.
- * @virt_reg_base: Base addresses for extra config regs.
+ * @type_base: Base address for irq type. If zero unsupported. Deprecated,
+ * use @config_base instead.
+ * @virt_reg_base: Base addresses for extra config regs. Deprecated, use
+ * @config_base instead.
+ * @config_base: Base address for IRQ type config regs. If null unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
* @init_ack_masked: Ack all masked interrupts once during initalization.
* @mask_invert: Inverted mask register: cleared bits are masked out.
+ * Deprecated; prefer describing an inverted mask register as
+ * an unmask register.
+ * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set
+ * both @mask_base and @unmask_base. If false, mask and unmask bits are
+ * inverted (which is deprecated behavior); if true, bits will not be
+ * inverted and the registers keep their normal behavior. Note that if
+ * you use only one of @mask_base or @unmask_base, this flag has no
+ * effect and is unnecessary. Any new drivers that set both @mask_base
+ * and @unmask_base should set this to true to avoid relying on the
+ * deprecated behavior.
* @use_ack: Use @ack register even if it is zero.
* @ack_invert: Inverted ack register: cleared bits for ack.
* @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts.
* @wake_invert: Inverted wake register: cleared bits are wake enabled.
- * @type_invert: Invert the type flags.
- * @type_in_mask: Use the mask registers for controlling irq type. For
- * interrupts defining type_rising/falling_mask use mask_base
- * for edge configuration and never update bits in type_base.
+ * @type_invert: Invert the type flags. Deprecated, use config registers
+ * instead.
+ * @type_in_mask: Use the mask registers for controlling irq type. Use this if
+ * the hardware provides separate bits for rising/falling edge
+ * or low/high level interrupts and they should be combined into
+ * a single logical interrupt. Use &struct regmap_irq_type data
+ * to define the mask bit for each irq type.
* @clear_on_unmask: For chips with interrupts cleared on read: read the status
* registers before unmasking interrupts to clear any bits
* set when they were masked.
* @not_fixed_stride: Used when chip peripherals are not laid out with fixed
- * stride. Must be used with sub_reg_offsets containing the
- * offsets to each peripheral.
+ * stride. Must be used with sub_reg_offsets containing the
+ * offsets to each peripheral. Deprecated; the same thing
+ * can be accomplished with a @get_irq_reg callback, without
+ * the need for a @sub_reg_offsets table.
* @status_invert: Inverted status register: cleared bits are active interrupts.
* @runtime_pm: Hold a runtime PM lock on the device when accessing it.
*
* @irqs: Descriptors for individual IRQs. Interrupt numbers are
* assigned based on the index in the array of the interrupt.
* @num_irqs: Number of descriptors.
- * @num_type_reg: Number of type registers.
+ * @num_type_reg: Number of type registers. Deprecated, use config registers
+ * instead.
* @num_virt_regs: Number of non-standard irq configuration registers.
- * If zero unsupported.
- * @type_reg_stride: Stride to use for chips where type registers are not
- * contiguous.
+ * If zero unsupported. Deprecated, use config registers
+ * instead.
+ * @num_config_bases: Number of config base registers.
+ * @num_config_regs: Number of config registers for each config base register.
* @handle_pre_irq: Driver specific callback to handle interrupt from device
* before regmap_irq_handler process the interrupts.
* @handle_post_irq: Driver specific callback to handle interrupt from device
* after handling the interrupts in regmap_irq_handler().
* @set_type_virt: Driver specific callback to extend regmap_irq_set_type()
- * and configure virt regs.
+ * and configure virt regs. Deprecated, use @set_type_config
+ * callback and config registers instead.
+ * @set_type_config: Callback used for configuring irq types.
+ * @get_irq_reg: Callback for mapping (base register, index) pairs to register
+ * addresses. The base register will be one of @status_base,
+ * @mask_base, etc., @main_status, or any of @config_base.
+ * The index will be in the range [0, num_main_regs[ for the
+ * main status base, [0, num_type_settings[ for any config
+ * register base, and [0, num_regs[ for any other base.
+ * If unspecified then regmap_irq_get_irq_reg_linear() is used.
* @irq_drv_data: Driver specific IRQ data which is passed as parameter when
* driver specific pre/post interrupt handler is called.
*
unsigned int wake_base;
unsigned int type_base;
unsigned int *virt_reg_base;
+ const unsigned int *config_base;
unsigned int irq_reg_stride;
- bool mask_writeonly:1;
- bool init_ack_masked:1;
- bool mask_invert:1;
- bool use_ack:1;
- bool ack_invert:1;
- bool clear_ack:1;
- bool wake_invert:1;
- bool runtime_pm:1;
- bool type_invert:1;
- bool type_in_mask:1;
- bool clear_on_unmask:1;
- bool not_fixed_stride:1;
- bool status_invert:1;
+ unsigned int init_ack_masked:1;
+ unsigned int mask_invert:1;
+ unsigned int mask_unmask_non_inverted:1;
+ unsigned int use_ack:1;
+ unsigned int ack_invert:1;
+ unsigned int clear_ack:1;
+ unsigned int wake_invert:1;
+ unsigned int runtime_pm:1;
+ unsigned int type_invert:1;
+ unsigned int type_in_mask:1;
+ unsigned int clear_on_unmask:1;
+ unsigned int not_fixed_stride:1;
+ unsigned int status_invert:1;
int num_regs;
int num_type_reg;
int num_virt_regs;
- unsigned int type_reg_stride;
+ int num_config_bases;
+ int num_config_regs;
int (*handle_pre_irq)(void *irq_drv_data);
int (*handle_post_irq)(void *irq_drv_data);
int (*set_type_virt)(unsigned int **buf, unsigned int type,
unsigned long hwirq, int reg);
+ int (*set_type_config)(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx);
+ unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data,
+ unsigned int base, int index);
void *irq_drv_data;
};
-struct regmap_irq_chip_data;
+unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data,
+ unsigned int base, int index);
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx);
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
int irq_base, const struct regmap_irq_chip *chip,
return -EINVAL;
}
+static inline int regmap_field_set_bits(struct regmap_field *field,
+ unsigned int bits)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
+static inline int regmap_field_clear_bits(struct regmap_field *field,
+ unsigned int bits)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
+static inline int regmap_field_test_bits(struct regmap_field *field,
+ unsigned int bits)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
static inline int regmap_fields_write(struct regmap_field *field,
unsigned int id, unsigned int val)
{
/**
* struct regulator_bulk_data - Data used for bulk regulator operations.
*
- * @supply: The name of the supply. Initialised by the user before
- * using the bulk regulator APIs.
- * @consumer: The regulator consumer for the supply. This will be managed
- * by the bulk API.
+ * @supply: The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @init_load_uA: After getting the regulator, regulator_set_load() will be
+ * called with this load. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply. This will be managed
+ * by the bulk API.
*
* The regulator APIs provide a series of regulator_bulk_() API calls as
* a convenience to consumers which require multiple supplies. This
*/
struct regulator_bulk_data {
const char *supply;
+ int init_load_uA;
struct regulator *consumer;
/* private: Internal use */
struct regulator_bulk_data *consumers);
int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
+int __must_check devm_regulator_bulk_get_const(
+ struct device *dev, int num_consumers,
+ const struct regulator_bulk_data *in_consumers,
+ struct regulator_bulk_data **out_consumers);
int __must_check regulator_bulk_enable(int num_consumers,
struct regulator_bulk_data *consumers);
int regulator_bulk_disable(int num_consumers,
* @ramp_delay_table: Table for mapping the regulator ramp-rate values. Values
* should be given in units of V/S (uV/uS). See the
* regulator_set_ramp_delay_regmap().
+ * @n_ramp_values: number of elements at @ramp_delay_table.
*
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
}
/* Returns effective CPU energy utilization, as seen by the scheduler */
-unsigned long sched_cpu_util(int cpu, unsigned long max);
+unsigned long sched_cpu_util(int cpu);
#endif /* CONFIG_SMP */
#ifdef CONFIG_RSEQ
}
extern void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task);
extern void rt_mutex_adjust_pi(struct task_struct *p);
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
- return tsk->pi_blocked_on != NULL;
-}
#else
static inline struct task_struct *rt_mutex_get_top_task(struct task_struct *task)
{
return NULL;
}
# define rt_mutex_adjust_pi(p) do { } while (0)
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
- return false;
-}
#endif
extern void normalize_rt_tasks(void);
atomic_t ref;
atomic_t nr_busy_cpus;
int has_idle_cores;
+ int nr_idle_scan;
};
struct sched_domain {
s32 *volt_uV);
};
+/**
+ * struct scmi_powercap_info - Describe one available Powercap domain
+ *
+ * @id: Domain ID as advertised by the platform.
+ * @notify_powercap_cap_change: CAP change notification support.
+ * @notify_powercap_measurement_change: MEASUREMENTS change notifications
+ * support.
+ * @async_powercap_cap_set: Asynchronous CAP set support.
+ * @powercap_cap_config: CAP configuration support.
+ * @powercap_monitoring: Monitoring (measurements) support.
+ * @powercap_pai_config: PAI configuration support.
+ * @powercap_scale_mw: Domain reports power data in milliwatt units.
+ * @powercap_scale_uw: Domain reports power data in microwatt units.
+ * Note that, when both @powercap_scale_mw and
+ * @powercap_scale_uw are set to false, the domain
+ * reports power data on an abstract linear scale.
+ * @name: name assigned to the Powercap Domain by platform.
+ * @min_pai: Minimum configurable PAI.
+ * @max_pai: Maximum configurable PAI.
+ * @pai_step: Step size between two consecutive PAI values.
+ * @min_power_cap: Minimum configurable CAP.
+ * @max_power_cap: Maximum configurable CAP.
+ * @power_cap_step: Step size between two consecutive CAP values.
+ * @sustainable_power: Maximum sustainable power consumption for this domain
+ * under normal conditions.
+ * @accuracy: The accuracy with which the power is measured and reported in
+ * integral multiples of 0.001 percent.
+ * @parent_id: Identifier of the containing parent power capping domain, or the
+ * value 0xFFFFFFFF if this powercap domain is a root domain not
+ * contained in any other domain.
+ */
+struct scmi_powercap_info {
+ unsigned int id;
+ bool notify_powercap_cap_change;
+ bool notify_powercap_measurement_change;
+ bool async_powercap_cap_set;
+ bool powercap_cap_config;
+ bool powercap_monitoring;
+ bool powercap_pai_config;
+ bool powercap_scale_mw;
+ bool powercap_scale_uw;
+ bool fastchannels;
+ char name[SCMI_MAX_STR_SIZE];
+ unsigned int min_pai;
+ unsigned int max_pai;
+ unsigned int pai_step;
+ unsigned int min_power_cap;
+ unsigned int max_power_cap;
+ unsigned int power_cap_step;
+ unsigned int sustainable_power;
+ unsigned int accuracy;
+#define SCMI_POWERCAP_ROOT_ZONE_ID 0xFFFFFFFFUL
+ unsigned int parent_id;
+ struct scmi_fc_info *fc_info;
+};
+
+/**
+ * struct scmi_powercap_proto_ops - represents the various operations provided
+ * by SCMI Powercap Protocol
+ *
+ * @num_domains_get: get the count of powercap domains provided by SCMI.
+ * @info_get: get the information for the specified domain.
+ * @cap_get: get the current CAP value for the specified domain.
+ * @cap_set: set the CAP value for the specified domain to the provided value;
+ * if the domain supports setting the CAP with an asynchronous command
+ * this request will finally trigger an asynchronous transfer, but, if
+ * @ignore_dresp here is set to true, this call will anyway return
+ * immediately without waiting for the related delayed response.
+ * @pai_get: get the current PAI value for the specified domain.
+ * @pai_set: set the PAI value for the specified domain to the provided value.
+ * @measurements_get: retrieve the current average power measurements for the
+ * specified domain and the related PAI upon which is
+ * calculated.
+ * @measurements_threshold_set: set the desired low and high power thresholds
+ * to be used when registering for notification
+ * of type POWERCAP_MEASUREMENTS_NOTIFY with this
+ * powercap domain.
+ * Note that this must be called at least once
+ * before registering any callback with the usual
+ * @scmi_notify_ops; moreover, in case this method
+ * is called with measurement notifications already
+ * enabled it will also trigger, transparently, a
+ * proper update of the power thresholds configured
+ * in the SCMI backend server.
+ * @measurements_threshold_get: get the currently configured low and high power
+ * thresholds used when registering callbacks for
+ * notification POWERCAP_MEASUREMENTS_NOTIFY.
+ */
+struct scmi_powercap_proto_ops {
+ int (*num_domains_get)(const struct scmi_protocol_handle *ph);
+ const struct scmi_powercap_info __must_check *(*info_get)
+ (const struct scmi_protocol_handle *ph, u32 domain_id);
+ int (*cap_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 *power_cap);
+ int (*cap_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 power_cap, bool ignore_dresp);
+ int (*pai_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 *pai);
+ int (*pai_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 pai);
+ int (*measurements_get)(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *average_power, u32 *pai);
+ int (*measurements_threshold_set)(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 power_thresh_low,
+ u32 power_thresh_high);
+ int (*measurements_threshold_get)(const struct scmi_protocol_handle *ph,
+ u32 domain_id, u32 *power_thresh_low,
+ u32 *power_thresh_high);
+};
+
/**
* struct scmi_notify_ops - represents notifications' operations provided by
* SCMI core
*
* @dev: pointer to the SCMI device
* @version: pointer to the structure containing SCMI version information
+ * @devm_protocol_acquire: devres managed method to get hold of a protocol,
+ * causing its initialization and related resource
+ * accounting
* @devm_protocol_get: devres managed method to acquire a protocol and get specific
* operations and a dedicated protocol handler
* @devm_protocol_put: devres managed method to release a protocol
struct device *dev;
struct scmi_revision_info *version;
+ int __must_check (*devm_protocol_acquire)(struct scmi_device *sdev,
+ u8 proto);
const void __must_check *
(*devm_protocol_get)(struct scmi_device *sdev, u8 proto,
struct scmi_protocol_handle **ph);
SCMI_PROTOCOL_SENSOR = 0x15,
SCMI_PROTOCOL_RESET = 0x16,
SCMI_PROTOCOL_VOLTAGE = 0x17,
+ SCMI_PROTOCOL_POWERCAP = 0x18,
};
enum scmi_system_events {
SCMI_EVENT_RESET_ISSUED = 0x0,
SCMI_EVENT_BASE_ERROR_EVENT = 0x0,
SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0,
+ SCMI_EVENT_POWERCAP_CAP_CHANGED = 0x0,
+ SCMI_EVENT_POWERCAP_MEASUREMENTS_CHANGED = 0x1,
};
struct scmi_power_state_changed_report {
struct scmi_system_power_state_notifier_report {
ktime_t timestamp;
unsigned int agent_id;
+#define SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(flags) ((flags) & BIT(0))
unsigned int flags;
unsigned int system_state;
+ unsigned int timeout;
};
struct scmi_perf_limits_report {
unsigned long long reports[];
};
+struct scmi_powercap_cap_changed_report {
+ ktime_t timestamp;
+ unsigned int agent_id;
+ unsigned int domain_id;
+ unsigned int power_cap;
+ unsigned int pai;
+};
+
+struct scmi_powercap_meas_changed_report {
+ ktime_t timestamp;
+ unsigned int agent_id;
+ unsigned int domain_id;
+ unsigned int power;
+};
#endif /* _LINUX_SCMI_PROTOCOL_H */
int security_inode_follow_link(struct dentry *dentry, struct inode *inode,
bool rcu);
int security_inode_permission(struct inode *inode, int mask);
-int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
+int security_inode_setattr(struct user_namespace *mnt_userns,
+ struct dentry *dentry, struct iattr *attr);
int security_inode_getattr(const struct path *path);
int security_inode_setxattr(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *name,
return 0;
}
-static inline int security_inode_setattr(struct dentry *dentry,
- struct iattr *attr)
+static inline int security_inode_setattr(struct user_namespace *mnt_userns,
+ struct dentry *dentry,
+ struct iattr *attr)
{
return 0;
}
struct device;
struct mtk_mutex;
+enum mtk_mutex_mod_index {
+ /* MDP table index */
+ MUTEX_MOD_IDX_MDP_RDMA0,
+ MUTEX_MOD_IDX_MDP_RSZ0,
+ MUTEX_MOD_IDX_MDP_RSZ1,
+ MUTEX_MOD_IDX_MDP_TDSHP0,
+ MUTEX_MOD_IDX_MDP_WROT0,
+ MUTEX_MOD_IDX_MDP_WDMA,
+ MUTEX_MOD_IDX_MDP_AAL0,
+ MUTEX_MOD_IDX_MDP_CCORR0,
+
+ MUTEX_MOD_IDX_MAX /* ALWAYS keep at the end */
+};
+
+enum mtk_mutex_sof_index {
+ MUTEX_SOF_IDX_SINGLE_MODE,
+
+ MUTEX_SOF_IDX_MAX /* ALWAYS keep at the end */
+};
+
struct mtk_mutex *mtk_mutex_get(struct device *dev);
int mtk_mutex_prepare(struct mtk_mutex *mutex);
void mtk_mutex_add_comp(struct mtk_mutex *mutex,
enum mtk_ddp_comp_id id);
void mtk_mutex_enable(struct mtk_mutex *mutex);
+int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex,
+ void *pkt);
void mtk_mutex_disable(struct mtk_mutex *mutex);
void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
enum mtk_ddp_comp_id id);
void mtk_mutex_put(struct mtk_mutex *mutex);
void mtk_mutex_acquire(struct mtk_mutex *mutex);
void mtk_mutex_release(struct mtk_mutex *mutex);
+int mtk_mutex_write_mod(struct mtk_mutex *mutex,
+ enum mtk_mutex_mod_index idx,
+ bool clear);
+int mtk_mutex_write_sof(struct mtk_mutex *mutex,
+ enum mtk_mutex_sof_index idx);
#endif /* MTK_MUTEX_H */
#include <uapi/linux/spi/spi.h>
#include <linux/acpi.h>
+#include <linux/u64_stats_sync.h>
struct dma_chan;
struct software_node;
/**
* struct spi_statistics - statistics for spi transfers
- * @lock: lock protecting this structure
+ * @syncp: seqcount to protect members in this struct for per-cpu udate
+ * on 32-bit systems
*
* @messages: number of spi-messages handled
* @transfers: number of spi_transfers handled
* maxsize limit
*/
struct spi_statistics {
- spinlock_t lock; /* lock for the whole structure */
+ struct u64_stats_sync syncp;
- unsigned long messages;
- unsigned long transfers;
- unsigned long errors;
- unsigned long timedout;
+ u64_stats_t messages;
+ u64_stats_t transfers;
+ u64_stats_t errors;
+ u64_stats_t timedout;
- unsigned long spi_sync;
- unsigned long spi_sync_immediate;
- unsigned long spi_async;
+ u64_stats_t spi_sync;
+ u64_stats_t spi_sync_immediate;
+ u64_stats_t spi_async;
- unsigned long long bytes;
- unsigned long long bytes_rx;
- unsigned long long bytes_tx;
+ u64_stats_t bytes;
+ u64_stats_t bytes_rx;
+ u64_stats_t bytes_tx;
#define SPI_STATISTICS_HISTO_SIZE 17
- unsigned long transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE];
+ u64_stats_t transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE];
- unsigned long transfers_split_maxsize;
+ u64_stats_t transfers_split_maxsize;
};
-#define SPI_STATISTICS_ADD_TO_FIELD(stats, field, count) \
- do { \
- unsigned long flags; \
- spin_lock_irqsave(&(stats)->lock, flags); \
- (stats)->field += count; \
- spin_unlock_irqrestore(&(stats)->lock, flags); \
+#define SPI_STATISTICS_ADD_TO_FIELD(pcpu_stats, field, count) \
+ do { \
+ struct spi_statistics *__lstats; \
+ get_cpu(); \
+ __lstats = this_cpu_ptr(pcpu_stats); \
+ u64_stats_update_begin(&__lstats->syncp); \
+ u64_stats_add(&__lstats->field, count); \
+ u64_stats_update_end(&__lstats->syncp); \
+ put_cpu(); \
} while (0)
-#define SPI_STATISTICS_INCREMENT_FIELD(stats, field) \
- SPI_STATISTICS_ADD_TO_FIELD(stats, field, 1)
+#define SPI_STATISTICS_INCREMENT_FIELD(pcpu_stats, field) \
+ do { \
+ struct spi_statistics *__lstats; \
+ get_cpu(); \
+ __lstats = this_cpu_ptr(pcpu_stats); \
+ u64_stats_update_begin(&__lstats->syncp); \
+ u64_stats_inc(&__lstats->field); \
+ u64_stats_update_end(&__lstats->syncp); \
+ put_cpu(); \
+ } while (0)
/**
* struct spi_delay - SPI delay information
* @cs_inactive: delay to be introduced by the controller after CS is
* deasserted. If @cs_change_delay is used from @spi_transfer, then the
* two delays will be added up.
- * @statistics: statistics for the spi_device
+ * @pcpu_statistics: statistics for the spi_device
*
* A @spi_device is used to interchange data between an SPI slave
* (usually a discrete chip) and CPU memory.
struct spi_device {
struct device dev;
struct spi_controller *controller;
- struct spi_controller *master; /* compatibility layer */
+ struct spi_controller *master; /* Compatibility layer */
u32 max_speed_hz;
u8 chip_select;
u8 bits_per_word;
bool rt;
-#define SPI_NO_TX BIT(31) /* no transmit wire */
-#define SPI_NO_RX BIT(30) /* no receive wire */
+#define SPI_NO_TX BIT(31) /* No transmit wire */
+#define SPI_NO_RX BIT(30) /* No receive wire */
/*
* All bits defined above should be covered by SPI_MODE_KERNEL_MASK.
* The SPI_MODE_KERNEL_MASK has the SPI_MODE_USER_MASK counterpart,
void *controller_data;
char modalias[SPI_NAME_SIZE];
const char *driver_override;
- struct gpio_desc *cs_gpiod; /* chip select gpio desc */
- struct spi_delay word_delay; /* inter-word delay */
+ struct gpio_desc *cs_gpiod; /* Chip select gpio desc */
+ struct spi_delay word_delay; /* Inter-word delay */
/* CS delays */
struct spi_delay cs_setup;
struct spi_delay cs_hold;
struct spi_delay cs_inactive;
- /* the statistics */
- struct spi_statistics statistics;
+ /* The statistics */
+ struct spi_statistics __percpu *pcpu_statistics;
/*
* likely need more hooks for more protocol options affecting how
return dev ? container_of(dev, struct spi_device, dev) : NULL;
}
-/* most drivers won't need to care about device refcounting */
+/* Most drivers won't need to care about device refcounting */
static inline struct spi_device *spi_dev_get(struct spi_device *spi)
{
return (spi && get_device(&spi->dev)) ? spi : NULL;
spi->controller_state = state;
}
-/* device driver data */
+/* Device driver data */
static inline void spi_set_drvdata(struct spi_device *spi, void *data)
{
extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 chip_select);
-/* use a define to avoid include chaining to get THIS_MODULE */
+/* Use a define to avoid include chaining to get THIS_MODULE */
#define spi_register_driver(driver) \
__spi_register_driver(THIS_MODULE, driver)
* @pump_messages: work struct for scheduling work to the message pump
* @queue_lock: spinlock to syncronise access to message queue
* @queue: message queue
- * @idling: the device is entering idle state
* @cur_msg: the currently in-flight message
- * @cur_msg_prepared: spi_prepare_message was called for the currently
- * in-flight message
+ * @cur_msg_completion: a completion for the current in-flight message
+ * @cur_msg_incomplete: Flag used internally to opportunistically skip
+ * the @cur_msg_completion. This flag is used to check if the driver has
+ * already called spi_finalize_current_message().
+ * @cur_msg_need_completion: Flag used internally to opportunistically skip
+ * the @cur_msg_completion. This flag is used to signal the context that
+ * is running spi_finalize_current_message() that it needs to complete()
* @cur_msg_mapped: message has been mapped for DMA
* @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
* selected
* @max_native_cs: When cs_gpiods is used, and this field is filled in,
* spi_register_controller() will validate all native CS (including the
* unused native CS) against this value.
- * @statistics: statistics for the spi_controller
+ * @pcpu_statistics: statistics for the spi_controller
* @dma_tx: DMA transmit channel
* @dma_rx: DMA receive channel
* @dummy_rx: dummy receive buffer for full-duplex devices
* @irq_flags: Interrupt enable state during PTP system timestamping
* @fallback: fallback to pio if dma transfer return failure with
* SPI_TRANS_FAIL_NO_START.
+ * @queue_empty: signal green light for opportunistically skipping the queue
+ * for spi_sync transfers.
*
* Each SPI controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
struct list_head list;
- /* other than negative (== assign one dynamically), bus_num is fully
+ /* Other than negative (== assign one dynamically), bus_num is fully
* board-specific. usually that simplifies to being SOC-specific.
* example: one SOC has three SPI controllers, numbered 0..2,
* and one board's schematics might show it using SPI-2. software
*/
u16 num_chipselect;
- /* some SPI controllers pose alignment requirements on DMAable
+ /* Some SPI controllers pose alignment requirements on DMAable
* buffers; let protocol drivers know about these requirements.
*/
u16 dma_alignment;
/* spi_device.mode flags override flags for this controller */
u32 buswidth_override_bits;
- /* bitmask of supported bits_per_word for transfers */
+ /* Bitmask of supported bits_per_word for transfers */
u32 bits_per_word_mask;
#define SPI_BPW_MASK(bits) BIT((bits) - 1)
#define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1)
- /* limits on transfer speed */
+ /* Limits on transfer speed */
u32 min_speed_hz;
u32 max_speed_hz;
- /* other constraints relevant to this driver */
+ /* Other constraints relevant to this driver */
u16 flags;
-#define SPI_CONTROLLER_HALF_DUPLEX BIT(0) /* can't do full duplex */
-#define SPI_CONTROLLER_NO_RX BIT(1) /* can't do buffer read */
-#define SPI_CONTROLLER_NO_TX BIT(2) /* can't do buffer write */
-#define SPI_CONTROLLER_MUST_RX BIT(3) /* requires rx */
-#define SPI_CONTROLLER_MUST_TX BIT(4) /* requires tx */
+#define SPI_CONTROLLER_HALF_DUPLEX BIT(0) /* Can't do full duplex */
+#define SPI_CONTROLLER_NO_RX BIT(1) /* Can't do buffer read */
+#define SPI_CONTROLLER_NO_TX BIT(2) /* Can't do buffer write */
+#define SPI_CONTROLLER_MUST_RX BIT(3) /* Requires rx */
+#define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */
#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */
- /* flag indicating if the allocation of this struct is devres-managed */
+ /* Flag indicating if the allocation of this struct is devres-managed */
bool devm_allocated;
- /* flag indicating this is an SPI slave controller */
+ /* Flag indicating this is an SPI slave controller */
bool slave;
/*
/* Used to avoid adding the same CS twice */
struct mutex add_lock;
- /* lock and mutex for SPI bus locking */
+ /* Lock and mutex for SPI bus locking */
spinlock_t bus_lock_spinlock;
struct mutex bus_lock_mutex;
- /* flag indicating that the SPI bus is locked for exclusive use */
+ /* Flag indicating that the SPI bus is locked for exclusive use */
bool bus_lock_flag;
/* Setup mode and clock, etc (spi driver may call many times).
*/
int (*set_cs_timing)(struct spi_device *spi);
- /* bidirectional bulk transfers
+ /* Bidirectional bulk transfers
*
* + The transfer() method may not sleep; its main role is
* just to add the message to the queue.
int (*transfer)(struct spi_device *spi,
struct spi_message *mesg);
- /* called on release() to free memory provided by spi_controller */
+ /* Called on release() to free memory provided by spi_controller */
void (*cleanup)(struct spi_device *spi);
/*
spinlock_t queue_lock;
struct list_head queue;
struct spi_message *cur_msg;
- bool idling;
+ struct completion cur_msg_completion;
+ bool cur_msg_incomplete;
+ bool cur_msg_need_completion;
bool busy;
bool running;
bool rt;
bool auto_runtime_pm;
- bool cur_msg_prepared;
bool cur_msg_mapped;
char last_cs;
bool last_cs_mode_high;
s8 unused_native_cs;
s8 max_native_cs;
- /* statistics */
- struct spi_statistics statistics;
+ /* Statistics */
+ struct spi_statistics __percpu *pcpu_statistics;
/* DMA channels for use with core dmaengine helpers */
struct dma_chan *dma_tx;
struct dma_chan *dma_rx;
- /* dummy data for full duplex devices */
+ /* Dummy data for full duplex devices */
void *dummy_rx;
void *dummy_tx;
/* Interrupt enable state during PTP system timestamping */
unsigned long irq_flags;
+
+ /* Flag for enabling opportunistic skipping of the queue in spi_sync */
+ bool queue_empty;
};
static inline void *spi_controller_get_devdata(struct spi_controller *ctlr)
struct spi_transfer *xfer,
size_t progress, bool irqs_off);
-/* the spi driver core manages memory for the spi_controller classdev */
+/* The spi driver core manages memory for the spi_controller classdev */
extern struct spi_controller *__spi_alloc_controller(struct device *host,
unsigned int size, bool slave);
struct spi_res {
struct list_head entry;
spi_res_release_t release;
- unsigned long long data[]; /* guarantee ull alignment */
+ unsigned long long data[]; /* Guarantee ull alignment */
};
/*---------------------------------------------------------------------------*/
* and its transfers, ignore them until its completion callback.
*/
struct spi_transfer {
- /* it's ok if tx_buf == rx_buf (right?)
+ /* It's ok if tx_buf == rx_buf (right?)
* for MicroWire, one buffer must be null
* buffers must work with dma_*map_single() calls, unless
* spi_message.is_dma_mapped reports a pre-existing mapping
* @queue: for use by whichever driver currently owns the message
* @state: for use by whichever driver currently owns the message
* @resources: for resource management when the spi message is processed
+ * @prepared: spi_prepare_message was called for the this message
*
* A @spi_message is used to execute an atomic sequence of data transfers,
* each represented by a struct spi_transfer. The sequence is "atomic"
* tell them about such special cases.
*/
- /* completion is reported through a callback */
+ /* Completion is reported through a callback */
void (*complete)(void *context);
void *context;
unsigned frame_length;
unsigned actual_length;
int status;
- /* for optional use by whatever driver currently owns the
+ /* For optional use by whatever driver currently owns the
* spi_message ... between calls to spi_async and then later
* complete(), that's the spi_controller controller driver.
*/
struct list_head queue;
void *state;
- /* list of spi_res reources when the spi message is processed */
+ /* List of spi_res reources when the spi message is processed */
struct list_head resources;
+
+ /* spi_prepare_message() was called for this message */
+ bool prepared;
};
static inline void spi_message_init_no_memset(struct spi_message *m)
if (ctlr->max_transfer_size)
tr_max = ctlr->max_transfer_size(spi);
- /* transfer size limit must not be greater than messsage size limit */
+ /* Transfer size limit must not be greater than message size limit */
return min(tr_max, msg_max);
}
return spi_sync_transfer(spi, &t, 1);
}
-/* this copies txbuf and rxbuf data; for small transfers only! */
+/* This copies txbuf and rxbuf data; for small transfers only! */
extern int spi_write_then_read(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
void *rxbuf, unsigned n_rx);
status = spi_write_then_read(spi, &cmd, 1, &result, 1);
- /* return negative errno or unsigned value */
+ /* Return negative errno or unsigned value */
return (status < 0) ? status : result;
}
status = spi_write_then_read(spi, &cmd, 1, &result, 2);
- /* return negative errno or unsigned value */
+ /* Return negative errno or unsigned value */
return (status < 0) ? status : result;
}
* are active in some dynamic board configuration models.
*/
struct spi_board_info {
- /* the device name and module name are coupled, like platform_bus;
+ /* The device name and module name are coupled, like platform_bus;
* "modalias" is normally the driver name.
*
* platform_data goes to spi_device.dev.platform_data,
void *controller_data;
int irq;
- /* slower signaling on noisy or low voltage boards */
+ /* Slower signaling on noisy or low voltage boards */
u32 max_speed_hz;
extern int
spi_register_board_info(struct spi_board_info const *info, unsigned n);
#else
-/* board init code may ignore whether SPI is configured or not */
+/* Board init code may ignore whether SPI is configured or not */
static inline int
spi_register_board_info(struct spi_board_info const *info, unsigned n)
{ return 0; }
\
hrtimer_init_sleeper_on_stack(&__t, CLOCK_MONOTONIC, \
HRTIMER_MODE_REL); \
- if ((timeout) != KTIME_MAX) \
- hrtimer_start_range_ns(&__t.timer, timeout, \
- current->timer_slack_ns, \
- HRTIMER_MODE_REL); \
+ if ((timeout) != KTIME_MAX) { \
+ hrtimer_set_expires_range_ns(&__t.timer, timeout, \
+ current->timer_slack_ns); \
+ hrtimer_sleeper_start_expires(&__t, HRTIMER_MODE_REL); \
+ } \
\
__ret = ___wait_event(wq_head, condition, state, 0, 0, \
if (!__t.task) { \
const char *, const void *, size_t, int,
struct inode **);
int vfs_setxattr(struct user_namespace *, struct dentry *, const char *,
- const void *, size_t, int);
+ void *, size_t, int);
int __vfs_removexattr(struct user_namespace *, struct dentry *, const char *);
int __vfs_removexattr_locked(struct user_namespace *, struct dentry *,
const char *, struct inode **);
{
const struct inet6_dev *idev = __in6_dev_get(dev);
+ if (unlikely(!idev))
+ return true;
+
return !!idev->cnf.ignore_routes_with_linkdown;
}
};
void l2cap_chan_hold(struct l2cap_chan *c);
+struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c);
void l2cap_chan_put(struct l2cap_chan *c);
static inline void l2cap_chan_lock(struct l2cap_chan *chan)
struct dst_entry *inet_csk_update_pmtu(struct sock *sk, u32 mtu);
-#define TCP_PINGPONG_THRESH 3
+#define TCP_PINGPONG_THRESH 1
static inline void inet_csk_enter_pingpong_mode(struct sock *sk)
{
return inet_csk(sk)->icsk_ack.pingpong >= TCP_PINGPONG_THRESH;
}
-static inline void inet_csk_inc_pingpong_cnt(struct sock *sk)
-{
- struct inet_connection_sock *icsk = inet_csk(sk);
-
- if (icsk->icsk_ack.pingpong < U8_MAX)
- icsk->icsk_ack.pingpong++;
-}
-
static inline bool inet_csk_has_ulp(struct sock *sk)
{
return inet_sk(sk)->is_icsk && !!inet_csk(sk)->icsk_ulp_ops;
{
/* Does this proto have per netns sysctl_wmem ? */
if (proto->sysctl_wmem_offset)
- return *(int *)((void *)sock_net(sk) + proto->sysctl_wmem_offset);
+ return READ_ONCE(*(int *)((void *)sock_net(sk) + proto->sysctl_wmem_offset));
- return *proto->sysctl_wmem;
+ return READ_ONCE(*proto->sysctl_wmem);
}
static inline int sk_get_rmem0(const struct sock *sk, const struct proto *proto)
{
/* Does this proto have per netns sysctl_rmem ? */
if (proto->sysctl_rmem_offset)
- return *(int *)((void *)sock_net(sk) + proto->sysctl_rmem_offset);
+ return READ_ONCE(*(int *)((void *)sock_net(sk) + proto->sysctl_rmem_offset));
- return *proto->sysctl_rmem;
+ return READ_ONCE(*proto->sysctl_rmem);
}
/* Default TCP Small queue budget is ~1 ms of data (1sec >> 10)
static inline int tcp_win_from_space(const struct sock *sk, int space)
{
- int tcp_adv_win_scale = sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale;
+ int tcp_adv_win_scale = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale);
return tcp_adv_win_scale <= 0 ?
(space>>(-tcp_adv_win_scale)) :
/* note: we begin tracing dlm_lock_start() only if ls and lkb are found */
TRACE_EVENT(dlm_lock_start,
- TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb, int mode,
- __u32 flags),
+ TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb, void *name,
+ unsigned int namelen, int mode, __u32 flags),
- TP_ARGS(ls, lkb, mode, flags),
+ TP_ARGS(ls, lkb, name, namelen, mode, flags),
TP_STRUCT__entry(
__field(__u32, ls_id)
__field(__u32, lkb_id)
__field(int, mode)
__field(__u32, flags)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : namelen)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
__entry->mode = mode;
__entry->flags = flags;
+
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
+ else if (name)
+ memcpy(__get_dynamic_array(res_name), name,
+ __get_dynamic_array_len(res_name));
),
- TP_printk("ls_id=%u lkb_id=%x mode=%s flags=%s",
+ TP_printk("ls_id=%u lkb_id=%x mode=%s flags=%s res_name=%s",
__entry->ls_id, __entry->lkb_id,
show_lock_mode(__entry->mode),
- show_lock_flags(__entry->flags))
+ show_lock_flags(__entry->flags),
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
TRACE_EVENT(dlm_lock_end,
- TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb, int mode, __u32 flags,
- int error),
+ TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb, void *name,
+ unsigned int namelen, int mode, __u32 flags, int error),
- TP_ARGS(ls, lkb, mode, flags, error),
+ TP_ARGS(ls, lkb, name, namelen, mode, flags, error),
TP_STRUCT__entry(
__field(__u32, ls_id)
__field(int, mode)
__field(__u32, flags)
__field(int, error)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : namelen)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
__entry->mode = mode;
__entry->flags = flags;
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
+ else if (name)
+ memcpy(__get_dynamic_array(res_name), name,
+ __get_dynamic_array_len(res_name));
+
/* return value will be zeroed in those cases by dlm_lock()
* we do it here again to not introduce more overhead if
* trace isn't running and error reflects the return value.
__entry->error = 0;
else
__entry->error = error;
+
),
- TP_printk("ls_id=%u lkb_id=%x mode=%s flags=%s error=%d",
+ TP_printk("ls_id=%u lkb_id=%x mode=%s flags=%s error=%d res_name=%s",
__entry->ls_id, __entry->lkb_id,
show_lock_mode(__entry->mode),
- show_lock_flags(__entry->flags), __entry->error)
+ show_lock_flags(__entry->flags), __entry->error,
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
__field(__u32, ls_id)
__field(__u32, lkb_id)
__field(int, mode)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : 0)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
__entry->mode = mode;
+
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
),
- TP_printk("ls_id=%u lkb_id=%x mode=%s", __entry->ls_id,
- __entry->lkb_id, show_lock_mode(__entry->mode))
+ TP_printk("ls_id=%u lkb_id=%x mode=%s res_name=%s",
+ __entry->ls_id, __entry->lkb_id,
+ show_lock_mode(__entry->mode),
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
TRACE_EVENT(dlm_ast,
- TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb, struct dlm_lksb *lksb),
+ TP_PROTO(struct dlm_ls *ls, struct dlm_lkb *lkb),
- TP_ARGS(ls, lkb, lksb),
+ TP_ARGS(ls, lkb),
TP_STRUCT__entry(
__field(__u32, ls_id)
__field(__u32, lkb_id)
__field(u8, sb_flags)
__field(int, sb_status)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : 0)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
- __entry->sb_flags = lksb->sb_flags;
- __entry->sb_status = lksb->sb_status;
+ __entry->sb_flags = lkb->lkb_lksb->sb_flags;
+ __entry->sb_status = lkb->lkb_lksb->sb_status;
+
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
),
- TP_printk("ls_id=%u lkb_id=%x sb_flags=%s sb_status=%d",
+ TP_printk("ls_id=%u lkb_id=%x sb_flags=%s sb_status=%d res_name=%s",
__entry->ls_id, __entry->lkb_id,
- show_dlm_sb_flags(__entry->sb_flags), __entry->sb_status)
+ show_dlm_sb_flags(__entry->sb_flags), __entry->sb_status,
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
__field(__u32, ls_id)
__field(__u32, lkb_id)
__field(__u32, flags)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : 0)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
__entry->flags = flags;
+
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
),
- TP_printk("ls_id=%u lkb_id=%x flags=%s",
+ TP_printk("ls_id=%u lkb_id=%x flags=%s res_name=%s",
__entry->ls_id, __entry->lkb_id,
- show_lock_flags(__entry->flags))
+ show_lock_flags(__entry->flags),
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
__field(__u32, lkb_id)
__field(__u32, flags)
__field(int, error)
+ __dynamic_array(unsigned char, res_name,
+ lkb->lkb_resource ? lkb->lkb_resource->res_length : 0)
),
TP_fast_assign(
+ struct dlm_rsb *r;
+
__entry->ls_id = ls->ls_global_id;
__entry->lkb_id = lkb->lkb_id;
__entry->flags = flags;
__entry->error = error;
+
+ r = lkb->lkb_resource;
+ if (r)
+ memcpy(__get_dynamic_array(res_name), r->res_name,
+ __get_dynamic_array_len(res_name));
),
- TP_printk("ls_id=%u lkb_id=%x flags=%s error=%d",
+ TP_printk("ls_id=%u lkb_id=%x flags=%s error=%d res_name=%s",
__entry->ls_id, __entry->lkb_id,
- show_lock_flags(__entry->flags), __entry->error)
+ show_lock_flags(__entry->flags), __entry->error,
+ __print_hex_str(__get_dynamic_array(res_name),
+ __get_dynamic_array_len(res_name)))
);
TP_PROTO(unsigned long call_site,
const void *ptr,
+ struct kmem_cache *s,
size_t bytes_req,
size_t bytes_alloc,
gfp_t gfp_flags),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags),
TP_STRUCT__entry(
__field( unsigned long, call_site )
__field( size_t, bytes_req )
__field( size_t, bytes_alloc )
__field( unsigned long, gfp_flags )
+ __field( bool, accounted )
),
TP_fast_assign(
__entry->bytes_req = bytes_req;
__entry->bytes_alloc = bytes_alloc;
__entry->gfp_flags = (__force unsigned long)gfp_flags;
+ __entry->accounted = IS_ENABLED(CONFIG_MEMCG_KMEM) ?
+ ((gfp_flags & __GFP_ACCOUNT) ||
+ (s && s->flags & SLAB_ACCOUNT)) : false;
),
- TP_printk("call_site=%pS ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s",
+ TP_printk("call_site=%pS ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s accounted=%s",
(void *)__entry->call_site,
__entry->ptr,
__entry->bytes_req,
__entry->bytes_alloc,
- show_gfp_flags(__entry->gfp_flags))
+ show_gfp_flags(__entry->gfp_flags),
+ __entry->accounted ? "true" : "false")
);
DEFINE_EVENT(kmem_alloc, kmalloc,
- TP_PROTO(unsigned long call_site, const void *ptr,
+ TP_PROTO(unsigned long call_site, const void *ptr, struct kmem_cache *s,
size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags)
);
DEFINE_EVENT(kmem_alloc, kmem_cache_alloc,
- TP_PROTO(unsigned long call_site, const void *ptr,
+ TP_PROTO(unsigned long call_site, const void *ptr, struct kmem_cache *s,
size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags)
);
DECLARE_EVENT_CLASS(kmem_alloc_node,
TP_PROTO(unsigned long call_site,
const void *ptr,
+ struct kmem_cache *s,
size_t bytes_req,
size_t bytes_alloc,
gfp_t gfp_flags,
int node),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags, node),
TP_STRUCT__entry(
__field( unsigned long, call_site )
__field( size_t, bytes_alloc )
__field( unsigned long, gfp_flags )
__field( int, node )
+ __field( bool, accounted )
),
TP_fast_assign(
__entry->bytes_alloc = bytes_alloc;
__entry->gfp_flags = (__force unsigned long)gfp_flags;
__entry->node = node;
+ __entry->accounted = IS_ENABLED(CONFIG_MEMCG_KMEM) ?
+ ((gfp_flags & __GFP_ACCOUNT) ||
+ (s && s->flags & SLAB_ACCOUNT)) : false;
),
- TP_printk("call_site=%pS ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d",
+ TP_printk("call_site=%pS ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d accounted=%s",
(void *)__entry->call_site,
__entry->ptr,
__entry->bytes_req,
__entry->bytes_alloc,
show_gfp_flags(__entry->gfp_flags),
- __entry->node)
+ __entry->node,
+ __entry->accounted ? "true" : "false")
);
DEFINE_EVENT(kmem_alloc_node, kmalloc_node,
TP_PROTO(unsigned long call_site, const void *ptr,
- size_t bytes_req, size_t bytes_alloc,
+ struct kmem_cache *s, size_t bytes_req, size_t bytes_alloc,
gfp_t gfp_flags, int node),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags, node)
);
DEFINE_EVENT(kmem_alloc_node, kmem_cache_alloc_node,
TP_PROTO(unsigned long call_site, const void *ptr,
- size_t bytes_req, size_t bytes_alloc,
+ struct kmem_cache *s, size_t bytes_req, size_t bytes_alloc,
gfp_t gfp_flags, int node),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
+ TP_ARGS(call_site, ptr, s, bytes_req, bytes_alloc, gfp_flags, node)
);
TRACE_EVENT(kfree,
#include <linux/tracepoint.h>
+TRACE_EVENT(scmi_fc_call,
+ TP_PROTO(u8 protocol_id, u8 msg_id, u32 res_id, u32 val1, u32 val2),
+ TP_ARGS(protocol_id, msg_id, res_id, val1, val2),
+
+ TP_STRUCT__entry(
+ __field(u8, protocol_id)
+ __field(u8, msg_id)
+ __field(u32, res_id)
+ __field(u32, val1)
+ __field(u32, val2)
+ ),
+
+ TP_fast_assign(
+ __entry->protocol_id = protocol_id;
+ __entry->msg_id = msg_id;
+ __entry->res_id = res_id;
+ __entry->val1 = val1;
+ __entry->val2 = val2;
+ ),
+
+ TP_printk("[0x%02X]:[0x%02X]:[%08X]:%u:%u",
+ __entry->protocol_id, __entry->msg_id,
+ __entry->res_id, __entry->val1, __entry->val2)
+);
+
TRACE_EVENT(scmi_xfer_begin,
TP_PROTO(int transfer_id, u8 msg_id, u8 protocol_id, u16 seq,
bool poll),
__entry->transfer_id, __entry->msg_id, __entry->protocol_id,
__entry->seq, __entry->msg_type)
);
+
+TRACE_EVENT(scmi_msg_dump,
+ TP_PROTO(u8 protocol_id, u8 msg_id, unsigned char *tag, u16 seq,
+ int status, void *buf, size_t len),
+ TP_ARGS(protocol_id, msg_id, tag, seq, status, buf, len),
+
+ TP_STRUCT__entry(
+ __field(u8, protocol_id)
+ __field(u8, msg_id)
+ __array(char, tag, 5)
+ __field(u16, seq)
+ __field(int, status)
+ __field(size_t, len)
+ __dynamic_array(unsigned char, cmd, len)
+ ),
+
+ TP_fast_assign(
+ __entry->protocol_id = protocol_id;
+ __entry->msg_id = msg_id;
+ strscpy(__entry->tag, tag, 5);
+ __entry->seq = seq;
+ __entry->status = status;
+ __entry->len = len;
+ memcpy(__get_dynamic_array(cmd), buf, __entry->len);
+ ),
+
+ TP_printk("pt=%02X t=%s msg_id=%02X seq=%04X s=%d pyld=%s",
+ __entry->protocol_id, __entry->tag, __entry->msg_id,
+ __entry->seq, __entry->status,
+ __print_hex_str(__get_dynamic_array(cmd), __entry->len))
+);
#endif /* _TRACE_SCMI_H */
/* This part must be outside protection */
#define F_LINUX_SPECIFIC_BASE 1024
+#ifndef HAVE_ARCH_STRUCT_FLOCK
struct flock {
short l_type;
short l_whence;
__ARCH_FLOCK64_PAD
#endif
};
+#endif /* HAVE_ARCH_STRUCT_FLOCK */
#endif /* _ASM_GENERIC_FCNTL_H */
#define FAN_MARK_FLUSH 0x00000080
/* FAN_MARK_FILESYSTEM is 0x00000100 */
#define FAN_MARK_EVICTABLE 0x00000200
+/* This bit is mutually exclusive with FAN_MARK_IGNORED_MASK bit */
+#define FAN_MARK_IGNORE 0x00000400
/* These are NOT bitwise flags. Both bits can be used togther. */
#define FAN_MARK_INODE 0x00000000
#define FAN_MARK_MOUNT 0x00000010
#define FAN_MARK_FILESYSTEM 0x00000100
+/*
+ * Convenience macro - FAN_MARK_IGNORE requires FAN_MARK_IGNORED_SURV_MODIFY
+ * for non-inode mark types.
+ */
+#define FAN_MARK_IGNORE_SURV (FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY)
+
/* Deprecated - do not use this in programs and do not add new flags here! */
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
* { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
* { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 id; } && PERF_FORMAT_ID
+ * { u64 lost; } && PERF_FORMAT_LOST
* } && !PERF_FORMAT_GROUP
*
* { u64 nr;
* { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 value;
* { u64 id; } && PERF_FORMAT_ID
+ * { u64 lost; } && PERF_FORMAT_LOST
* } cntr[nr];
* } && PERF_FORMAT_GROUP
* };
PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
PERF_FORMAT_ID = 1U << 2,
PERF_FORMAT_GROUP = 1U << 3,
+ PERF_FORMAT_LOST = 1U << 4,
- PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
+ PERF_FORMAT_MAX = 1U << 5, /* non-ABI */
};
#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
dst_bstat->cputime.utime += src_bstat->cputime.utime;
dst_bstat->cputime.stime += src_bstat->cputime.stime;
dst_bstat->cputime.sum_exec_runtime += src_bstat->cputime.sum_exec_runtime;
+#ifdef CONFIG_SCHED_CORE
+ dst_bstat->forceidle_sum += src_bstat->forceidle_sum;
+#endif
}
static void cgroup_base_stat_sub(struct cgroup_base_stat *dst_bstat,
dst_bstat->cputime.utime -= src_bstat->cputime.utime;
dst_bstat->cputime.stime -= src_bstat->cputime.stime;
dst_bstat->cputime.sum_exec_runtime -= src_bstat->cputime.sum_exec_runtime;
+#ifdef CONFIG_SCHED_CORE
+ dst_bstat->forceidle_sum -= src_bstat->forceidle_sum;
+#endif
}
static void cgroup_base_stat_flush(struct cgroup *cgrp, int cpu)
case CPUTIME_SOFTIRQ:
rstatc->bstat.cputime.stime += delta_exec;
break;
+#ifdef CONFIG_SCHED_CORE
+ case CPUTIME_FORCEIDLE:
+ rstatc->bstat.forceidle_sum += delta_exec;
+ break;
+#endif
default:
break;
}
* with how it is done by __cgroup_account_cputime_field for each bit of
* cpu time attributed to a cgroup.
*/
-static void root_cgroup_cputime(struct task_cputime *cputime)
+static void root_cgroup_cputime(struct cgroup_base_stat *bstat)
{
+ struct task_cputime *cputime = &bstat->cputime;
int i;
cputime->stime = 0;
cputime->sum_exec_runtime += user;
cputime->sum_exec_runtime += sys;
cputime->sum_exec_runtime += cpustat[CPUTIME_STEAL];
+
+#ifdef CONFIG_SCHED_CORE
+ bstat->forceidle_sum += cpustat[CPUTIME_FORCEIDLE];
+#endif
}
}
{
struct cgroup *cgrp = seq_css(seq)->cgroup;
u64 usage, utime, stime;
- struct task_cputime cputime;
+ struct cgroup_base_stat bstat;
+#ifdef CONFIG_SCHED_CORE
+ u64 forceidle_time;
+#endif
if (cgroup_parent(cgrp)) {
cgroup_rstat_flush_hold(cgrp);
usage = cgrp->bstat.cputime.sum_exec_runtime;
cputime_adjust(&cgrp->bstat.cputime, &cgrp->prev_cputime,
&utime, &stime);
+#ifdef CONFIG_SCHED_CORE
+ forceidle_time = cgrp->bstat.forceidle_sum;
+#endif
cgroup_rstat_flush_release();
} else {
- root_cgroup_cputime(&cputime);
- usage = cputime.sum_exec_runtime;
- utime = cputime.utime;
- stime = cputime.stime;
+ root_cgroup_cputime(&bstat);
+ usage = bstat.cputime.sum_exec_runtime;
+ utime = bstat.cputime.utime;
+ stime = bstat.cputime.stime;
+#ifdef CONFIG_SCHED_CORE
+ forceidle_time = bstat.forceidle_sum;
+#endif
}
do_div(usage, NSEC_PER_USEC);
do_div(utime, NSEC_PER_USEC);
do_div(stime, NSEC_PER_USEC);
+#ifdef CONFIG_SCHED_CORE
+ do_div(forceidle_time, NSEC_PER_USEC);
+#endif
seq_printf(seq, "usage_usec %llu\n"
"user_usec %llu\n"
"system_usec %llu\n",
usage, utime, stime);
+
+#ifdef CONFIG_SCHED_CORE
+ seq_printf(seq, "core_sched.force_idle_usec %llu\n", forceidle_time);
+#endif
}
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_SLUB_DEBUG_ON=y
-CONFIG_KMEMCHECK=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_GCOV_KERNEL=y
CONFIG_LOCKDEP=y
CONFIG_PROVE_LOCKING=y
CONFIG_SCHEDSTATS=y
-CONFIG_VMLINUX_VALIDATION=y
+CONFIG_NOINSTR_VALIDATION=y
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
if (event->attr.read_format & PERF_FORMAT_ID)
entry += sizeof(u64);
+ if (event->attr.read_format & PERF_FORMAT_LOST)
+ entry += sizeof(u64);
+
if (event->attr.read_format & PERF_FORMAT_GROUP) {
nr += nr_siblings;
size += sizeof(u64);
values[n++] += perf_event_count(leader);
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(leader);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&leader->lost_samples);
for_each_sibling_event(sub, leader) {
values[n++] += perf_event_count(sub);
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(sub);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&sub->lost_samples);
}
raw_spin_unlock_irqrestore(&ctx->lock, flags);
u64 read_format, char __user *buf)
{
u64 enabled, running;
- u64 values[4];
+ u64 values[5];
int n = 0;
values[n++] = __perf_event_read_value(event, &enabled, &running);
values[n++] = running;
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(event);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&event->lost_samples);
if (copy_to_user(buf, values, n * sizeof(u64)))
return -EFAULT;
u64 enabled, u64 running)
{
u64 read_format = event->attr.read_format;
- u64 values[4];
+ u64 values[5];
int n = 0;
values[n++] = perf_event_count(event);
}
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(event);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&event->lost_samples);
__output_copy(handle, values, n * sizeof(u64));
}
{
struct perf_event *leader = event->group_leader, *sub;
u64 read_format = event->attr.read_format;
- u64 values[5];
+ u64 values[6];
int n = 0;
values[n++] = 1 + leader->nr_siblings;
values[n++] = perf_event_count(leader);
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(leader);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&leader->lost_samples);
__output_copy(handle, values, n * sizeof(u64));
values[n++] = perf_event_count(sub);
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(sub);
+ if (read_format & PERF_FORMAT_LOST)
+ values[n++] = atomic64_read(&sub->lost_samples);
__output_copy(handle, values, n * sizeof(u64));
}
goto out;
if (unlikely(rb->paused)) {
- if (rb->nr_pages)
+ if (rb->nr_pages) {
local_inc(&rb->lost);
+ atomic64_inc(&event->lost_samples);
+ }
goto out;
}
fail:
local_inc(&rb->lost);
+ atomic64_inc(&event->lost_samples);
perf_output_put_handle(handle);
out:
rcu_read_unlock();
# Supports effective affinity mask
config GENERIC_IRQ_EFFECTIVE_AFF_MASK
+ depends on SMP
bool
# Support for delayed migration from interrupt context
# Generic IRQ IPI support
config GENERIC_IRQ_IPI
bool
+ depends on SMP
select IRQ_DOMAIN_HIERARCHY
# Generic MSI interrupt support
#ifdef CONFIG_SMP
static int
-__irq_startup_managed(struct irq_desc *desc, struct cpumask *aff, bool force)
+__irq_startup_managed(struct irq_desc *desc, const struct cpumask *aff,
+ bool force)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
}
#else
static __always_inline int
-__irq_startup_managed(struct irq_desc *desc, struct cpumask *aff, bool force)
+__irq_startup_managed(struct irq_desc *desc, const struct cpumask *aff,
+ bool force)
{
return IRQ_STARTUP_NORMAL;
}
int irq_startup(struct irq_desc *desc, bool resend, bool force)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
- struct cpumask *aff = irq_data_get_affinity_mask(d);
+ const struct cpumask *aff = irq_data_get_affinity_mask(d);
int ret = 0;
desc->depth = 0;
if (data->chip->irq_request_resources)
return data->chip->irq_request_resources(data);
- return -ENOSYS;
+ /* no error on missing optional irq_chip::irq_request_resources */
+ return 0;
}
EXPORT_SYMBOL_GPL(irq_chip_request_resources_parent);
static void irq_debug_show_masks(struct seq_file *m, struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
- struct cpumask *msk;
+ const struct cpumask *msk;
msk = irq_data_get_affinity_mask(data);
seq_printf(m, "affinity: %*pbl\n", cpumask_pr_args(msk));
return 0;
}
-static void irq_unmap_generic_chip(struct irq_domain *d, unsigned int virq)
+void irq_unmap_generic_chip(struct irq_domain *d, unsigned int virq)
{
struct irq_data *data = irq_domain_get_irq_data(d, virq);
struct irq_domain_chip_generic *dgc = d->gc;
int irq_destroy_ipi(unsigned int irq, const struct cpumask *dest)
{
struct irq_data *data = irq_get_irq_data(irq);
- struct cpumask *ipimask = data ? irq_data_get_affinity_mask(data) : NULL;
+ const struct cpumask *ipimask;
struct irq_domain *domain;
unsigned int nr_irqs;
- if (!irq || !data || !ipimask)
+ if (!irq || !data)
return -EINVAL;
domain = data->domain;
return -EINVAL;
}
- if (WARN_ON(!cpumask_subset(dest, ipimask)))
+ ipimask = irq_data_get_affinity_mask(data);
+ if (!ipimask || WARN_ON(!cpumask_subset(dest, ipimask)))
/*
* Must be destroying a subset of CPUs to which this IPI
* was set up to target
irq_hw_number_t ipi_get_hwirq(unsigned int irq, unsigned int cpu)
{
struct irq_data *data = irq_get_irq_data(irq);
- struct cpumask *ipimask = data ? irq_data_get_affinity_mask(data) : NULL;
+ const struct cpumask *ipimask;
- if (!data || !ipimask || cpu >= nr_cpu_ids)
+ if (!data || cpu >= nr_cpu_ids)
return INVALID_HWIRQ;
- if (!cpumask_test_cpu(cpu, ipimask))
+ ipimask = irq_data_get_affinity_mask(data);
+ if (!ipimask || !cpumask_test_cpu(cpu, ipimask))
return INVALID_HWIRQ;
/*
static int ipi_send_verify(struct irq_chip *chip, struct irq_data *data,
const struct cpumask *dest, unsigned int cpu)
{
- struct cpumask *ipimask = irq_data_get_affinity_mask(data);
+ const struct cpumask *ipimask = irq_data_get_affinity_mask(data);
if (!chip || !ipimask)
return -EINVAL;
char *p = "";
raw_spin_lock_irq(&desc->lock);
- for (action = desc->action; action != NULL; action = action->next) {
+ for_each_action_of_desc(desc, action) {
ret += scnprintf(buf + ret, PAGE_SIZE - ret, "%s%s",
p, action->name);
p = ",";
static atomic_t unknown_domains;
if (WARN_ON((size && direct_max) ||
- (!IS_ENABLED(CONFIG_IRQ_DOMAIN_NOMAP) && direct_max)))
+ (!IS_ENABLED(CONFIG_IRQ_DOMAIN_NOMAP) && direct_max) ||
+ (direct_max && (direct_max != hwirq_max))))
return NULL;
domain = kzalloc_node(struct_size(domain, revmap, size),
domain->hwirq_max = hwirq_max;
if (direct_max) {
- size = direct_max;
domain->flags |= IRQ_DOMAIN_FLAG_NO_MAP;
}
pr_debug("create_direct virq allocation failed\n");
return 0;
}
- if (virq >= domain->revmap_size) {
- pr_err("ERROR: no free irqs available below %i maximum\n",
- domain->revmap_size);
+ if (virq >= domain->hwirq_max) {
+ pr_err("ERROR: no free irqs available below %lu maximum\n",
+ domain->hwirq_max);
irq_free_desc(virq);
return 0;
}
return desc;
if (irq_domain_is_nomap(domain)) {
- if (hwirq < domain->revmap_size) {
+ if (hwirq < domain->hwirq_max) {
data = irq_domain_get_irq_data(domain, hwirq);
if (data && data->hwirq == hwirq)
desc = irq_data_to_desc(data);
+ if (irq && desc)
+ *irq = hwirq;
}
return desc;
pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
chip->name, data->irq);
}
-
-static inline void irq_init_effective_affinity(struct irq_data *data,
- const struct cpumask *mask)
-{
- cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
-}
#else
static inline void irq_validate_effective_affinity(struct irq_data *data) { }
-static inline void irq_init_effective_affinity(struct irq_data *data,
- const struct cpumask *mask) { }
#endif
int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
return false;
cpumask_copy(desc->irq_common_data.affinity, mask);
- irq_init_effective_affinity(data, mask);
+ irq_data_update_effective_affinity(data, mask);
irqd_set(data, IRQD_AFFINITY_SET);
return true;
}
synchronize_irq(irq);
}
}
-EXPORT_SYMBOL_GPL(suspend_device_irqs);
static void resume_irq(struct irq_desc *desc)
{
{
resume_irqs(false);
}
-EXPORT_SYMBOL_GPL(resume_device_irqs);
return 0;
}
-/*
- * Update code which is definitely not currently executing.
- * Architectures which need heavyweight synchronization to modify
- * running code can override this to make the non-live update case
- * cheaper.
- */
-void __weak __init_or_module arch_jump_label_transform_static(struct jump_entry *entry,
- enum jump_label_type type)
+#ifndef arch_jump_label_transform_static
+static void arch_jump_label_transform_static(struct jump_entry *entry,
+ enum jump_label_type type)
{
- arch_jump_label_transform(entry, type);
+ /* nothing to do on most architectures */
}
+#endif
static inline struct jump_entry *static_key_entries(struct static_key *key)
{
#ifdef CONFIG_MODULES
-static enum jump_label_type jump_label_init_type(struct jump_entry *entry)
+enum jump_label_type jump_label_init_type(struct jump_entry *entry)
{
struct static_key *key = jump_entry_key(entry);
bool type = static_key_type(key);
}
}
-/***
- * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop()
- * @mod: module to patch
- *
- * Allow for run-time selection of the optimal nops. Before the module
- * loads patch these with arch_get_jump_label_nop(), which is specified by
- * the arch specific jump label code.
- */
-void jump_label_apply_nops(struct module *mod)
-{
- struct jump_entry *iter_start = mod->jump_entries;
- struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
- struct jump_entry *iter;
-
- /* if the module doesn't have jump label entries, just return */
- if (iter_start == iter_stop)
- return;
-
- for (iter = iter_start; iter < iter_stop; iter++) {
- /* Only write NOPs for arch_branch_static(). */
- if (jump_label_init_type(iter) == JUMP_LABEL_NOP)
- arch_jump_label_transform_static(iter, JUMP_LABEL_NOP);
- }
-}
-
static int jump_label_add_module(struct module *mod)
{
struct jump_entry *iter_start = mod->jump_entries;
return 0;
}
- lockdep_init_map_waits(lock, name, key, 0,
- lock->wait_type_inner,
- lock->wait_type_outer);
+ lockdep_init_map_type(lock, name, key, 0,
+ lock->wait_type_inner,
+ lock->wait_type_outer,
+ lock->lock_type);
class = register_lock_class(lock, subclass, 0);
hlock->class_idx = class - lock_classes;
struct task_struct *task;
enum rwsem_waiter_type type;
unsigned long timeout;
-
- /* Writer only, not initialized in reader */
bool handoff_set;
};
#define rwsem_first_waiter(sem) \
* to give up the lock), request a HANDOFF to
* force the issue.
*/
- if (!(oldcount & RWSEM_FLAG_HANDOFF) &&
- time_after(jiffies, waiter->timeout)) {
- adjustment -= RWSEM_FLAG_HANDOFF;
- lockevent_inc(rwsem_rlock_handoff);
+ if (time_after(jiffies, waiter->timeout)) {
+ if (!(oldcount & RWSEM_FLAG_HANDOFF)) {
+ adjustment -= RWSEM_FLAG_HANDOFF;
+ lockevent_inc(rwsem_rlock_handoff);
+ }
+ waiter->handoff_set = true;
}
atomic_long_add(-adjustment, &sem->count);
static inline bool rwsem_try_write_lock(struct rw_semaphore *sem,
struct rwsem_waiter *waiter)
{
- bool first = rwsem_first_waiter(sem) == waiter;
+ struct rwsem_waiter *first = rwsem_first_waiter(sem);
long count, new;
lockdep_assert_held(&sem->wait_lock);
bool has_handoff = !!(count & RWSEM_FLAG_HANDOFF);
if (has_handoff) {
- if (!first)
+ /*
+ * Honor handoff bit and yield only when the first
+ * waiter is the one that set it. Otherwisee, we
+ * still try to acquire the rwsem.
+ */
+ if (first->handoff_set && (waiter != first))
return false;
- /* First waiter inherits a previously set handoff bit */
- waiter->handoff_set = true;
+ /*
+ * First waiter can inherit a previously set handoff
+ * bit and spin on rwsem if lock acquisition fails.
+ */
+ if (waiter == first)
+ waiter->handoff_set = true;
}
new = count;
waiter.task = current;
waiter.type = RWSEM_WAITING_FOR_READ;
waiter.timeout = jiffies + RWSEM_WAIT_TIMEOUT;
+ waiter.handoff_set = false;
raw_spin_lock_irq(&sem->wait_lock);
if (list_empty(&sem->wait_list)) {
#define CREATE_TRACE_POINTS
#include <trace/events/rseq.h>
-#define RSEQ_CS_PREEMPT_MIGRATE_FLAGS (RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE | \
- RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT)
+#define RSEQ_CS_NO_RESTART_FLAGS (RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT | \
+ RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL | \
+ RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE)
/*
*
u32 flags, event_mask;
int ret;
+ if (WARN_ON_ONCE(cs_flags & RSEQ_CS_NO_RESTART_FLAGS) || cs_flags)
+ return -EINVAL;
+
/* Get thread flags. */
ret = get_user(flags, &t->rseq->flags);
if (ret)
return ret;
- /* Take critical section flags into account. */
- flags |= cs_flags;
-
- /*
- * Restart on signal can only be inhibited when restart on
- * preempt and restart on migrate are inhibited too. Otherwise,
- * a preempted signal handler could fail to restart the prior
- * execution context on sigreturn.
- */
- if (unlikely((flags & RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL) &&
- (flags & RSEQ_CS_PREEMPT_MIGRATE_FLAGS) !=
- RSEQ_CS_PREEMPT_MIGRATE_FLAGS))
+ if (WARN_ON_ONCE(flags & RSEQ_CS_NO_RESTART_FLAGS) || flags)
return -EINVAL;
/*
t->rseq_event_mask = 0;
preempt_enable();
- return !!(event_mask & ~flags);
+ return !!event_mask;
}
static int clear_rseq_cs(struct task_struct *t)
({ \
typeof(ptr) _ptr = (ptr); \
typeof(mask) _mask = (mask); \
- typeof(*_ptr) _old, _val = *_ptr; \
+ typeof(*_ptr) _val = *_ptr; \
\
- for (;;) { \
- _old = cmpxchg(_ptr, _val, _val | _mask); \
- if (_old == _val) \
- break; \
- _val = _old; \
- } \
- _old; \
+ do { \
+ } while (!try_cmpxchg(_ptr, &_val, _val | _mask)); \
+ _val; \
})
#if defined(CONFIG_SMP) && defined(TIF_POLLING_NRFLAG)
* this avoids any races wrt polling state changes and thereby avoids
* spurious IPIs.
*/
-static bool set_nr_and_not_polling(struct task_struct *p)
+static inline bool set_nr_and_not_polling(struct task_struct *p)
{
struct thread_info *ti = task_thread_info(p);
return !(fetch_or(&ti->flags, _TIF_NEED_RESCHED) & _TIF_POLLING_NRFLAG);
static bool set_nr_if_polling(struct task_struct *p)
{
struct thread_info *ti = task_thread_info(p);
- typeof(ti->flags) old, val = READ_ONCE(ti->flags);
+ typeof(ti->flags) val = READ_ONCE(ti->flags);
for (;;) {
if (!(val & _TIF_POLLING_NRFLAG))
return false;
if (val & _TIF_NEED_RESCHED)
return true;
- old = cmpxchg(&ti->flags, val, val | _TIF_NEED_RESCHED);
- if (old == val)
+ if (try_cmpxchg(&ti->flags, &val, val | _TIF_NEED_RESCHED))
break;
- val = old;
}
return true;
}
#else
-static bool set_nr_and_not_polling(struct task_struct *p)
+static inline bool set_nr_and_not_polling(struct task_struct *p)
{
set_tsk_need_resched(p);
return true;
}
#ifdef CONFIG_SMP
-static bool set_nr_if_polling(struct task_struct *p)
+static inline bool set_nr_if_polling(struct task_struct *p)
{
return false;
}
return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
}
-static inline bool ttwu_queue_cond(int cpu, int wake_flags)
+static inline bool ttwu_queue_cond(int cpu)
{
/*
* Do not complicate things with the async wake_list while the CPU is
if (!cpus_share_cache(smp_processor_id(), cpu))
return true;
+ if (cpu == smp_processor_id())
+ return false;
+
/*
- * If the task is descheduling and the only running task on the
- * CPU then use the wakelist to offload the task activation to
- * the soon-to-be-idle CPU as the current CPU is likely busy.
- * nr_running is checked to avoid unnecessary task stacking.
+ * If the wakee cpu is idle, or the task is descheduling and the
+ * only running task on the CPU, then use the wakelist to offload
+ * the task activation to the idle (or soon-to-be-idle) CPU as
+ * the current CPU is likely busy. nr_running is checked to
+ * avoid unnecessary task stacking.
+ *
+ * Note that we can only get here with (wakee) p->on_rq=0,
+ * p->on_cpu can be whatever, we've done the dequeue, so
+ * the wakee has been accounted out of ->nr_running.
*/
- if ((wake_flags & WF_ON_CPU) && cpu_rq(cpu)->nr_running <= 1)
+ if (!cpu_rq(cpu)->nr_running)
return true;
return false;
static bool ttwu_queue_wakelist(struct task_struct *p, int cpu, int wake_flags)
{
- if (sched_feat(TTWU_QUEUE) && ttwu_queue_cond(cpu, wake_flags)) {
- if (WARN_ON_ONCE(cpu == smp_processor_id()))
- return false;
-
+ if (sched_feat(TTWU_QUEUE) && ttwu_queue_cond(cpu)) {
sched_clock_cpu(cpu); /* Sync clocks across CPUs */
__ttwu_queue_wakelist(p, cpu, wake_flags);
return true;
* scheduling.
*/
if (smp_load_acquire(&p->on_cpu) &&
- ttwu_queue_wakelist(p, task_cpu(p), wake_flags | WF_ON_CPU))
+ ttwu_queue_wakelist(p, task_cpu(p), wake_flags))
goto unlock;
/*
* Claim the task as running, we do this before switching to it
* such that any running task will have this set.
*
- * See the ttwu() WF_ON_CPU case and its ordering comment.
+ * See the smp_load_acquire(&p->on_cpu) case in ttwu() and
+ * its ordering comment.
*/
WRITE_ONCE(next->on_cpu, 1);
#endif
io_wq_worker_sleeping(tsk);
}
- if (tsk_is_pi_blocked(tsk))
- return;
+ /*
+ * spinlock and rwlock must not flush block requests. This will
+ * deadlock if the callback attempts to acquire a lock which is
+ * already acquired.
+ */
+ SCHED_WARN_ON(current->__state & TASK_RTLOCK_WAIT);
/*
* If we are going to sleep and we have plugged IO queued,
EXPORT_SYMBOL(set_user_nice);
/*
- * can_nice - check if a task can reduce its nice value
+ * is_nice_reduction - check if nice value is an actual reduction
+ *
+ * Similar to can_nice() but does not perform a capability check.
+ *
* @p: task
* @nice: nice value
*/
-int can_nice(const struct task_struct *p, const int nice)
+static bool is_nice_reduction(const struct task_struct *p, const int nice)
{
/* Convert nice value [19,-20] to rlimit style value [1,40]: */
int nice_rlim = nice_to_rlimit(nice);
- return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
- capable(CAP_SYS_NICE));
+ return (nice_rlim <= task_rlimit(p, RLIMIT_NICE));
+}
+
+/*
+ * can_nice - check if a task can reduce its nice value
+ * @p: task
+ * @nice: nice value
+ */
+int can_nice(const struct task_struct *p, const int nice)
+{
+ return is_nice_reduction(p, nice) || capable(CAP_SYS_NICE);
}
#ifdef __ARCH_WANT_SYS_NICE
* required to meet deadlines.
*/
unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
- unsigned long max, enum cpu_util_type type,
+ enum cpu_util_type type,
struct task_struct *p)
{
- unsigned long dl_util, util, irq;
+ unsigned long dl_util, util, irq, max;
struct rq *rq = cpu_rq(cpu);
+ max = arch_scale_cpu_capacity(cpu);
+
if (!uclamp_is_used() &&
type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
return max;
return min(max, util);
}
-unsigned long sched_cpu_util(int cpu, unsigned long max)
+unsigned long sched_cpu_util(int cpu)
{
- return effective_cpu_util(cpu, cpu_util_cfs(cpu), max,
- ENERGY_UTIL, NULL);
+ return effective_cpu_util(cpu, cpu_util_cfs(cpu), ENERGY_UTIL, NULL);
}
#endif /* CONFIG_SMP */
return match;
}
+/*
+ * Allow unprivileged RT tasks to decrease priority.
+ * Only issue a capable test if needed and only once to avoid an audit
+ * event on permitted non-privileged operations:
+ */
+static int user_check_sched_setscheduler(struct task_struct *p,
+ const struct sched_attr *attr,
+ int policy, int reset_on_fork)
+{
+ if (fair_policy(policy)) {
+ if (attr->sched_nice < task_nice(p) &&
+ !is_nice_reduction(p, attr->sched_nice))
+ goto req_priv;
+ }
+
+ if (rt_policy(policy)) {
+ unsigned long rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO);
+
+ /* Can't set/change the rt policy: */
+ if (policy != p->policy && !rlim_rtprio)
+ goto req_priv;
+
+ /* Can't increase priority: */
+ if (attr->sched_priority > p->rt_priority &&
+ attr->sched_priority > rlim_rtprio)
+ goto req_priv;
+ }
+
+ /*
+ * Can't set/change SCHED_DEADLINE policy at all for now
+ * (safest behavior); in the future we would like to allow
+ * unprivileged DL tasks to increase their relative deadline
+ * or reduce their runtime (both ways reducing utilization)
+ */
+ if (dl_policy(policy))
+ goto req_priv;
+
+ /*
+ * Treat SCHED_IDLE as nice 20. Only allow a switch to
+ * SCHED_NORMAL if the RLIMIT_NICE would normally permit it.
+ */
+ if (task_has_idle_policy(p) && !idle_policy(policy)) {
+ if (!is_nice_reduction(p, task_nice(p)))
+ goto req_priv;
+ }
+
+ /* Can't change other user's priorities: */
+ if (!check_same_owner(p))
+ goto req_priv;
+
+ /* Normal users shall not reset the sched_reset_on_fork flag: */
+ if (p->sched_reset_on_fork && !reset_on_fork)
+ goto req_priv;
+
+ return 0;
+
+req_priv:
+ if (!capable(CAP_SYS_NICE))
+ return -EPERM;
+
+ return 0;
+}
+
static int __sched_setscheduler(struct task_struct *p,
const struct sched_attr *attr,
bool user, bool pi)
(rt_policy(policy) != (attr->sched_priority != 0)))
return -EINVAL;
- /*
- * Allow unprivileged RT tasks to decrease priority:
- */
- if (user && !capable(CAP_SYS_NICE)) {
- if (fair_policy(policy)) {
- if (attr->sched_nice < task_nice(p) &&
- !can_nice(p, attr->sched_nice))
- return -EPERM;
- }
-
- if (rt_policy(policy)) {
- unsigned long rlim_rtprio =
- task_rlimit(p, RLIMIT_RTPRIO);
-
- /* Can't set/change the rt policy: */
- if (policy != p->policy && !rlim_rtprio)
- return -EPERM;
-
- /* Can't increase priority: */
- if (attr->sched_priority > p->rt_priority &&
- attr->sched_priority > rlim_rtprio)
- return -EPERM;
- }
-
- /*
- * Can't set/change SCHED_DEADLINE policy at all for now
- * (safest behavior); in the future we would like to allow
- * unprivileged DL tasks to increase their relative deadline
- * or reduce their runtime (both ways reducing utilization)
- */
- if (dl_policy(policy))
- return -EPERM;
-
- /*
- * Treat SCHED_IDLE as nice 20. Only allow a switch to
- * SCHED_NORMAL if the RLIMIT_NICE would normally permit it.
- */
- if (task_has_idle_policy(p) && !idle_policy(policy)) {
- if (!can_nice(p, task_nice(p)))
- return -EPERM;
- }
-
- /* Can't change other user's priorities: */
- if (!check_same_owner(p))
- return -EPERM;
-
- /* Normal users shall not reset the sched_reset_on_fork flag: */
- if (p->sched_reset_on_fork && !reset_on_fork)
- return -EPERM;
- }
-
if (user) {
+ retval = user_check_sched_setscheduler(p, attr, policy, reset_on_fork);
+ if (retval)
+ return retval;
+
if (attr->sched_flags & SCHED_FLAG_SUGOV)
return -EINVAL;
#endif
DECLARE_PER_CPU(cpumask_var_t, load_balance_mask);
-DECLARE_PER_CPU(cpumask_var_t, select_idle_mask);
+DECLARE_PER_CPU(cpumask_var_t, select_rq_mask);
void __init sched_init(void)
{
for_each_possible_cpu(i) {
per_cpu(load_balance_mask, i) = (cpumask_var_t)kzalloc_node(
cpumask_size(), GFP_KERNEL, cpu_to_node(i));
- per_cpu(select_idle_mask, i) = (cpumask_var_t)kzalloc_node(
+ per_cpu(select_rq_mask, i) = (cpumask_var_t)kzalloc_node(
cpumask_size(), GFP_KERNEL, cpu_to_node(i));
}
#endif /* CONFIG_CPUMASK_OFFSTACK */
unsigned long old_cookie;
struct rq_flags rf;
struct rq *rq;
- bool enqueued;
rq = task_rq_lock(p, &rf);
*/
SCHED_WARN_ON((p->core_cookie || cookie) && !sched_core_enabled(rq));
- enqueued = sched_core_enqueued(p);
- if (enqueued)
+ if (sched_core_enqueued(p))
sched_core_dequeue(rq, p, DEQUEUE_SAVE);
old_cookie = p->core_cookie;
p->core_cookie = cookie;
- if (enqueued)
+ /*
+ * Consider the cases: !prev_cookie and !cookie.
+ */
+ if (cookie && task_on_rq_queued(p))
sched_core_enqueue(rq, p);
/*
if (p == rq_i->idle)
continue;
- __schedstat_add(p->stats.core_forceidle_sum, delta);
+ /*
+ * Note: this will account forceidle to the current cpu, even
+ * if it comes from our SMT sibling.
+ */
+ __account_forceidle_time(p, delta);
}
}
static void sugov_get_util(struct sugov_cpu *sg_cpu)
{
struct rq *rq = cpu_rq(sg_cpu->cpu);
- unsigned long max = arch_scale_cpu_capacity(sg_cpu->cpu);
- sg_cpu->max = max;
+ sg_cpu->max = arch_scale_cpu_capacity(sg_cpu->cpu);
sg_cpu->bw_dl = cpu_bw_dl(rq);
- sg_cpu->util = effective_cpu_util(sg_cpu->cpu, cpu_util_cfs(sg_cpu->cpu), max,
+ sg_cpu->util = effective_cpu_util(sg_cpu->cpu, cpu_util_cfs(sg_cpu->cpu),
FREQUENCY_UTIL, NULL);
}
cpustat[CPUTIME_IDLE] += cputime;
}
+
+#ifdef CONFIG_SCHED_CORE
+/*
+ * Account for forceidle time due to core scheduling.
+ *
+ * REQUIRES: schedstat is enabled.
+ */
+void __account_forceidle_time(struct task_struct *p, u64 delta)
+{
+ __schedstat_add(p->stats.core_forceidle_sum, delta);
+
+ task_group_account_field(p, CPUTIME_FORCEIDLE, delta);
+}
+#endif
+
/*
* When a guest is interrupted for a longer amount of time, missed clock
* ticks are not redelivered later. Due to that, this function may on
.data = &sysctl_sched_dl_period_max,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_douintvec_minmax,
+ .extra1 = (void *)&sysctl_sched_dl_period_min,
},
{
.procname = "sched_deadline_period_min_us",
.data = &sysctl_sched_dl_period_min,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_douintvec_minmax,
+ .extra2 = (void *)&sysctl_sched_dl_period_max,
},
{}
};
}
/* ensure we never gain time by being placed backwards. */
- cfs_rq->min_vruntime = max_vruntime(cfs_rq->min_vruntime, vruntime);
-#ifndef CONFIG_64BIT
- smp_wmb();
- cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime;
-#endif
+ u64_u32_store(cfs_rq->min_vruntime,
+ max_vruntime(cfs_rq->min_vruntime, vruntime));
}
static inline bool __entity_less(struct rb_node *a, const struct rb_node *b)
* Scheduling class queueing methods:
*/
+#ifdef CONFIG_NUMA
+#define NUMA_IMBALANCE_MIN 2
+
+static inline long
+adjust_numa_imbalance(int imbalance, int dst_running, int imb_numa_nr)
+{
+ /*
+ * Allow a NUMA imbalance if busy CPUs is less than the maximum
+ * threshold. Above this threshold, individual tasks may be contending
+ * for both memory bandwidth and any shared HT resources. This is an
+ * approximation as the number of running tasks may not be related to
+ * the number of busy CPUs due to sched_setaffinity.
+ */
+ if (dst_running > imb_numa_nr)
+ return imbalance;
+
+ /*
+ * Allow a small imbalance based on a simple pair of communicating
+ * tasks that remain local when the destination is lightly loaded.
+ */
+ if (imbalance <= NUMA_IMBALANCE_MIN)
+ return 0;
+
+ return imbalance;
+}
+#endif /* CONFIG_NUMA */
+
#ifdef CONFIG_NUMA_BALANCING
/*
* Approximate time to scan a full NUMA task in ms. The task scan period is
static unsigned long cpu_load(struct rq *rq);
static unsigned long cpu_runnable(struct rq *rq);
-static inline long adjust_numa_imbalance(int imbalance,
- int dst_running, int imb_numa_nr);
static inline enum
numa_type numa_classify(unsigned int imbalance_pct,
*/
cur_ng = rcu_dereference(cur->numa_group);
if (cur_ng == p_ng) {
+ /*
+ * Do not swap within a group or between tasks that have
+ * no group if there is spare capacity. Swapping does
+ * not address the load imbalance and helps one task at
+ * the cost of punishing another.
+ */
+ if (env->dst_stats.node_type == node_has_spare)
+ goto unlock;
+
imp = taskimp + task_weight(cur, env->src_nid, dist) -
task_weight(cur, env->dst_nid, dist);
/*
p->node_stamp = 0;
p->numa_scan_seq = mm ? mm->numa_scan_seq : 0;
p->numa_scan_period = sysctl_numa_balancing_scan_delay;
+ p->numa_migrate_retry = 0;
/* Protect against double add, see task_tick_numa and task_numa_work */
p->numa_work.next = &p->numa_work;
p->numa_faults = NULL;
load->inv_weight = sched_prio_to_wmult[prio];
}
+static inline int throttled_hierarchy(struct cfs_rq *cfs_rq);
+
#ifdef CONFIG_FAIR_GROUP_SCHED
#ifdef CONFIG_SMP
/*
}
#endif /* CONFIG_SMP */
-static inline int throttled_hierarchy(struct cfs_rq *cfs_rq);
-
/*
* Recomputes the group entity based on the current state of its group
* runqueue.
}
#ifdef CONFIG_SMP
+static inline bool load_avg_is_decayed(struct sched_avg *sa)
+{
+ if (sa->load_sum)
+ return false;
+
+ if (sa->util_sum)
+ return false;
+
+ if (sa->runnable_sum)
+ return false;
+
+ /*
+ * _avg must be null when _sum are null because _avg = _sum / divider
+ * Make sure that rounding and/or propagation of PELT values never
+ * break this.
+ */
+ SCHED_WARN_ON(sa->load_avg ||
+ sa->util_avg ||
+ sa->runnable_avg);
+
+ return true;
+}
+
+static inline u64 cfs_rq_last_update_time(struct cfs_rq *cfs_rq)
+{
+ return u64_u32_load_copy(cfs_rq->avg.last_update_time,
+ cfs_rq->last_update_time_copy);
+}
#ifdef CONFIG_FAIR_GROUP_SCHED
/*
* Because list_add_leaf_cfs_rq always places a child cfs_rq on the list
if (cfs_rq->load.weight)
return false;
- if (cfs_rq->avg.load_sum)
- return false;
-
- if (cfs_rq->avg.util_sum)
- return false;
-
- if (cfs_rq->avg.runnable_sum)
+ if (!load_avg_is_decayed(&cfs_rq->avg))
return false;
if (child_cfs_rq_on_list(cfs_rq))
return false;
- /*
- * _avg must be null when _sum are null because _avg = _sum / divider
- * Make sure that rounding and/or propagation of PELT values never
- * break this.
- */
- SCHED_WARN_ON(cfs_rq->avg.load_avg ||
- cfs_rq->avg.util_avg ||
- cfs_rq->avg.runnable_avg);
-
return true;
}
if (!(se->avg.last_update_time && prev))
return;
-#ifndef CONFIG_64BIT
- {
- u64 p_last_update_time_copy;
- u64 n_last_update_time_copy;
-
- do {
- p_last_update_time_copy = prev->load_last_update_time_copy;
- n_last_update_time_copy = next->load_last_update_time_copy;
-
- smp_rmb();
-
- p_last_update_time = prev->avg.last_update_time;
- n_last_update_time = next->avg.last_update_time;
+ p_last_update_time = cfs_rq_last_update_time(prev);
+ n_last_update_time = cfs_rq_last_update_time(next);
- } while (p_last_update_time != p_last_update_time_copy ||
- n_last_update_time != n_last_update_time_copy);
- }
-#else
- p_last_update_time = prev->avg.last_update_time;
- n_last_update_time = next->avg.last_update_time;
-#endif
__update_load_avg_blocked_se(p_last_update_time, se);
se->avg.last_update_time = n_last_update_time;
}
#endif /* CONFIG_FAIR_GROUP_SCHED */
+#ifdef CONFIG_NO_HZ_COMMON
+static inline void migrate_se_pelt_lag(struct sched_entity *se)
+{
+ u64 throttled = 0, now, lut;
+ struct cfs_rq *cfs_rq;
+ struct rq *rq;
+ bool is_idle;
+
+ if (load_avg_is_decayed(&se->avg))
+ return;
+
+ cfs_rq = cfs_rq_of(se);
+ rq = rq_of(cfs_rq);
+
+ rcu_read_lock();
+ is_idle = is_idle_task(rcu_dereference(rq->curr));
+ rcu_read_unlock();
+
+ /*
+ * The lag estimation comes with a cost we don't want to pay all the
+ * time. Hence, limiting to the case where the source CPU is idle and
+ * we know we are at the greatest risk to have an outdated clock.
+ */
+ if (!is_idle)
+ return;
+
+ /*
+ * Estimated "now" is: last_update_time + cfs_idle_lag + rq_idle_lag, where:
+ *
+ * last_update_time (the cfs_rq's last_update_time)
+ * = cfs_rq_clock_pelt()@cfs_rq_idle
+ * = rq_clock_pelt()@cfs_rq_idle
+ * - cfs->throttled_clock_pelt_time@cfs_rq_idle
+ *
+ * cfs_idle_lag (delta between rq's update and cfs_rq's update)
+ * = rq_clock_pelt()@rq_idle - rq_clock_pelt()@cfs_rq_idle
+ *
+ * rq_idle_lag (delta between now and rq's update)
+ * = sched_clock_cpu() - rq_clock()@rq_idle
+ *
+ * We can then write:
+ *
+ * now = rq_clock_pelt()@rq_idle - cfs->throttled_clock_pelt_time +
+ * sched_clock_cpu() - rq_clock()@rq_idle
+ * Where:
+ * rq_clock_pelt()@rq_idle is rq->clock_pelt_idle
+ * rq_clock()@rq_idle is rq->clock_idle
+ * cfs->throttled_clock_pelt_time@cfs_rq_idle
+ * is cfs_rq->throttled_pelt_idle
+ */
+
+#ifdef CONFIG_CFS_BANDWIDTH
+ throttled = u64_u32_load(cfs_rq->throttled_pelt_idle);
+ /* The clock has been stopped for throttling */
+ if (throttled == U64_MAX)
+ return;
+#endif
+ now = u64_u32_load(rq->clock_pelt_idle);
+ /*
+ * Paired with _update_idle_rq_clock_pelt(). It ensures at the worst case
+ * is observed the old clock_pelt_idle value and the new clock_idle,
+ * which lead to an underestimation. The opposite would lead to an
+ * overestimation.
+ */
+ smp_rmb();
+ lut = cfs_rq_last_update_time(cfs_rq);
+
+ now -= throttled;
+ if (now < lut)
+ /*
+ * cfs_rq->avg.last_update_time is more recent than our
+ * estimation, let's use it.
+ */
+ now = lut;
+ else
+ now += sched_clock_cpu(cpu_of(rq)) - u64_u32_load(rq->clock_idle);
+
+ __update_load_avg_blocked_se(now, se);
+}
+#else
+static void migrate_se_pelt_lag(struct sched_entity *se) {}
+#endif
+
/**
* update_cfs_rq_load_avg - update the cfs_rq's load/util averages
* @now: current time, as per cfs_rq_clock_pelt()
}
decayed |= __update_load_avg_cfs_rq(now, cfs_rq);
-
-#ifndef CONFIG_64BIT
- smp_wmb();
- cfs_rq->load_last_update_time_copy = sa->last_update_time;
-#endif
-
+ u64_u32_store_copy(sa->last_update_time,
+ cfs_rq->last_update_time_copy,
+ sa->last_update_time);
return decayed;
}
}
}
-#ifndef CONFIG_64BIT
-static inline u64 cfs_rq_last_update_time(struct cfs_rq *cfs_rq)
-{
- u64 last_update_time_copy;
- u64 last_update_time;
-
- do {
- last_update_time_copy = cfs_rq->load_last_update_time_copy;
- smp_rmb();
- last_update_time = cfs_rq->avg.last_update_time;
- } while (last_update_time != last_update_time_copy);
-
- return last_update_time;
-}
-#else
-static inline u64 cfs_rq_last_update_time(struct cfs_rq *cfs_rq)
-{
- return cfs_rq->avg.last_update_time;
-}
-#endif
-
/*
* Synchronize entity load avg of dequeued entity without locking
* the previous rq.
__enqueue_entity(cfs_rq, se);
se->on_rq = 1;
- /*
- * When bandwidth control is enabled, cfs might have been removed
- * because of a parent been throttled but cfs->nr_running > 1. Try to
- * add it unconditionally.
- */
- if (cfs_rq->nr_running == 1 || cfs_bandwidth_used())
- list_add_leaf_cfs_rq(cfs_rq);
-
- if (cfs_rq->nr_running == 1)
+ if (cfs_rq->nr_running == 1) {
check_enqueue_throttle(cfs_rq);
+ if (!throttled_hierarchy(cfs_rq))
+ list_add_leaf_cfs_rq(cfs_rq);
+ }
}
static void __clear_buddies_last(struct sched_entity *se)
*/
if ((flags & (DEQUEUE_SAVE | DEQUEUE_MOVE)) != DEQUEUE_SAVE)
update_min_vruntime(cfs_rq);
+
+ if (cfs_rq->nr_running == 0)
+ update_idle_cfs_rq_clock_pelt(cfs_rq);
}
/*
/* update hierarchical throttle state */
walk_tg_tree_from(cfs_rq->tg, tg_nop, tg_unthrottle_up, (void *)rq);
- /* Nothing to run but something to decay (on_list)? Complete the branch */
if (!cfs_rq->load.weight) {
- if (cfs_rq->on_list)
- goto unthrottle_throttle;
- return;
+ if (!cfs_rq->on_list)
+ return;
+ /*
+ * Nothing to run but something to decay (on_list)?
+ * Complete the branch.
+ */
+ for_each_sched_entity(se) {
+ if (list_add_leaf_cfs_rq(cfs_rq_of(se)))
+ break;
+ }
+ goto unthrottle_throttle;
}
task_delta = cfs_rq->h_nr_running;
/* end evaluation on encountering a throttled cfs_rq */
if (cfs_rq_throttled(qcfs_rq))
goto unthrottle_throttle;
-
- /*
- * One parent has been throttled and cfs_rq removed from the
- * list. Add it back to not break the leaf list.
- */
- if (throttled_hierarchy(qcfs_rq))
- list_add_leaf_cfs_rq(qcfs_rq);
}
/* At this point se is NULL and we are at root level*/
add_nr_running(rq, task_delta);
unthrottle_throttle:
- /*
- * The cfs_rq_throttled() breaks in the above iteration can result in
- * incomplete leaf list maintenance, resulting in triggering the
- * assertion below.
- */
- for_each_sched_entity(se) {
- struct cfs_rq *qcfs_rq = cfs_rq_of(se);
-
- if (list_add_leaf_cfs_rq(qcfs_rq))
- break;
- }
-
assert_list_leaf_cfs_rq(rq);
/* Determine whether we need to wake up potentially idle CPU: */
/* end evaluation on encountering a throttled cfs_rq */
if (cfs_rq_throttled(cfs_rq))
goto enqueue_throttle;
-
- /*
- * One parent has been throttled and cfs_rq removed from the
- * list. Add it back to not break the leaf list.
- */
- if (throttled_hierarchy(cfs_rq))
- list_add_leaf_cfs_rq(cfs_rq);
}
/* At this point se is NULL and we are at root level*/
update_overutilized_status(rq);
enqueue_throttle:
- if (cfs_bandwidth_used()) {
- /*
- * When bandwidth control is enabled; the cfs_rq_throttled()
- * breaks in the above iteration can result in incomplete
- * leaf list maintenance, resulting in triggering the assertion
- * below.
- */
- for_each_sched_entity(se) {
- cfs_rq = cfs_rq_of(se);
-
- if (list_add_leaf_cfs_rq(cfs_rq))
- break;
- }
- }
-
assert_list_leaf_cfs_rq(rq);
hrtick_update(rq);
/* Working cpumask for: load_balance, load_balance_newidle. */
DEFINE_PER_CPU(cpumask_var_t, load_balance_mask);
-DEFINE_PER_CPU(cpumask_var_t, select_idle_mask);
+DEFINE_PER_CPU(cpumask_var_t, select_rq_mask);
#ifdef CONFIG_NO_HZ_COMMON
*/
static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool has_idle_core, int target)
{
- struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
+ struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_rq_mask);
int i, cpu, idle_cpu = -1, nr = INT_MAX;
+ struct sched_domain_shared *sd_share;
struct rq *this_rq = this_rq();
int this = smp_processor_id();
struct sched_domain *this_sd;
time = cpu_clock(this);
}
+ if (sched_feat(SIS_UTIL)) {
+ sd_share = rcu_dereference(per_cpu(sd_llc_shared, target));
+ if (sd_share) {
+ /* because !--nr is the condition to stop scan */
+ nr = READ_ONCE(sd_share->nr_idle_scan) + 1;
+ /* overloaded LLC is unlikely to have idle cpu/core */
+ if (nr == 1)
+ return -1;
+ }
+ }
+
for_each_cpu_wrap(cpu, cpus, target + 1) {
if (has_idle_core) {
i = select_idle_core(p, cpu, cpus, &idle_cpu);
int cpu, best_cpu = -1;
struct cpumask *cpus;
- cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
+ cpus = this_cpu_cpumask_var_ptr(select_rq_mask);
cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr);
task_util = uclamp_task_util(p);
}
/*
- * per-cpu select_idle_mask usage
+ * per-cpu select_rq_mask usage
*/
lockdep_assert_irqs_disabled();
}
/*
- * compute_energy(): Estimates the energy that @pd would consume if @p was
- * migrated to @dst_cpu. compute_energy() predicts what will be the utilization
- * landscape of @pd's CPUs after the task migration, and uses the Energy Model
- * to compute what would be the energy if we decided to actually migrate that
- * task.
+ * energy_env - Utilization landscape for energy estimation.
+ * @task_busy_time: Utilization contribution by the task for which we test the
+ * placement. Given by eenv_task_busy_time().
+ * @pd_busy_time: Utilization of the whole perf domain without the task
+ * contribution. Given by eenv_pd_busy_time().
+ * @cpu_cap: Maximum CPU capacity for the perf domain.
+ * @pd_cap: Entire perf domain capacity. (pd->nr_cpus * cpu_cap).
+ */
+struct energy_env {
+ unsigned long task_busy_time;
+ unsigned long pd_busy_time;
+ unsigned long cpu_cap;
+ unsigned long pd_cap;
+};
+
+/*
+ * Compute the task busy time for compute_energy(). This time cannot be
+ * injected directly into effective_cpu_util() because of the IRQ scaling.
+ * The latter only makes sense with the most recent CPUs where the task has
+ * run.
+ */
+static inline void eenv_task_busy_time(struct energy_env *eenv,
+ struct task_struct *p, int prev_cpu)
+{
+ unsigned long busy_time, max_cap = arch_scale_cpu_capacity(prev_cpu);
+ unsigned long irq = cpu_util_irq(cpu_rq(prev_cpu));
+
+ if (unlikely(irq >= max_cap))
+ busy_time = max_cap;
+ else
+ busy_time = scale_irq_capacity(task_util_est(p), irq, max_cap);
+
+ eenv->task_busy_time = busy_time;
+}
+
+/*
+ * Compute the perf_domain (PD) busy time for compute_energy(). Based on the
+ * utilization for each @pd_cpus, it however doesn't take into account
+ * clamping since the ratio (utilization / cpu_capacity) is already enough to
+ * scale the EM reported power consumption at the (eventually clamped)
+ * cpu_capacity.
+ *
+ * The contribution of the task @p for which we want to estimate the
+ * energy cost is removed (by cpu_util_next()) and must be calculated
+ * separately (see eenv_task_busy_time). This ensures:
+ *
+ * - A stable PD utilization, no matter which CPU of that PD we want to place
+ * the task on.
+ *
+ * - A fair comparison between CPUs as the task contribution (task_util())
+ * will always be the same no matter which CPU utilization we rely on
+ * (util_avg or util_est).
+ *
+ * Set @eenv busy time for the PD that spans @pd_cpus. This busy time can't
+ * exceed @eenv->pd_cap.
*/
-static long
-compute_energy(struct task_struct *p, int dst_cpu, struct perf_domain *pd)
+static inline void eenv_pd_busy_time(struct energy_env *eenv,
+ struct cpumask *pd_cpus,
+ struct task_struct *p)
{
- struct cpumask *pd_mask = perf_domain_span(pd);
- unsigned long cpu_cap = arch_scale_cpu_capacity(cpumask_first(pd_mask));
- unsigned long max_util = 0, sum_util = 0;
- unsigned long _cpu_cap = cpu_cap;
+ unsigned long busy_time = 0;
int cpu;
- _cpu_cap -= arch_scale_thermal_pressure(cpumask_first(pd_mask));
+ for_each_cpu(cpu, pd_cpus) {
+ unsigned long util = cpu_util_next(cpu, p, -1);
- /*
- * The capacity state of CPUs of the current rd can be driven by CPUs
- * of another rd if they belong to the same pd. So, account for the
- * utilization of these CPUs too by masking pd with cpu_online_mask
- * instead of the rd span.
- *
- * If an entire pd is outside of the current rd, it will not appear in
- * its pd list and will not be accounted by compute_energy().
- */
- for_each_cpu_and(cpu, pd_mask, cpu_online_mask) {
- unsigned long util_freq = cpu_util_next(cpu, p, dst_cpu);
- unsigned long cpu_util, util_running = util_freq;
- struct task_struct *tsk = NULL;
+ busy_time += effective_cpu_util(cpu, util, ENERGY_UTIL, NULL);
+ }
- /*
- * When @p is placed on @cpu:
- *
- * util_running = max(cpu_util, cpu_util_est) +
- * max(task_util, _task_util_est)
- *
- * while cpu_util_next is: max(cpu_util + task_util,
- * cpu_util_est + _task_util_est)
- */
- if (cpu == dst_cpu) {
- tsk = p;
- util_running =
- cpu_util_next(cpu, p, -1) + task_util_est(p);
- }
+ eenv->pd_busy_time = min(eenv->pd_cap, busy_time);
+}
- /*
- * Busy time computation: utilization clamping is not
- * required since the ratio (sum_util / cpu_capacity)
- * is already enough to scale the EM reported power
- * consumption at the (eventually clamped) cpu_capacity.
- */
- cpu_util = effective_cpu_util(cpu, util_running, cpu_cap,
- ENERGY_UTIL, NULL);
+/*
+ * Compute the maximum utilization for compute_energy() when the task @p
+ * is placed on the cpu @dst_cpu.
+ *
+ * Returns the maximum utilization among @eenv->cpus. This utilization can't
+ * exceed @eenv->cpu_cap.
+ */
+static inline unsigned long
+eenv_pd_max_util(struct energy_env *eenv, struct cpumask *pd_cpus,
+ struct task_struct *p, int dst_cpu)
+{
+ unsigned long max_util = 0;
+ int cpu;
- sum_util += min(cpu_util, _cpu_cap);
+ for_each_cpu(cpu, pd_cpus) {
+ struct task_struct *tsk = (cpu == dst_cpu) ? p : NULL;
+ unsigned long util = cpu_util_next(cpu, p, dst_cpu);
+ unsigned long cpu_util;
/*
* Performance domain frequency: utilization clamping
* NOTE: in case RT tasks are running, by default the
* FREQUENCY_UTIL's utilization can be max OPP.
*/
- cpu_util = effective_cpu_util(cpu, util_freq, cpu_cap,
- FREQUENCY_UTIL, tsk);
- max_util = max(max_util, min(cpu_util, _cpu_cap));
+ cpu_util = effective_cpu_util(cpu, util, FREQUENCY_UTIL, tsk);
+ max_util = max(max_util, cpu_util);
}
- return em_cpu_energy(pd->em_pd, max_util, sum_util, _cpu_cap);
+ return min(max_util, eenv->cpu_cap);
+}
+
+/*
+ * compute_energy(): Use the Energy Model to estimate the energy that @pd would
+ * consume for a given utilization landscape @eenv. When @dst_cpu < 0, the task
+ * contribution is ignored.
+ */
+static inline unsigned long
+compute_energy(struct energy_env *eenv, struct perf_domain *pd,
+ struct cpumask *pd_cpus, struct task_struct *p, int dst_cpu)
+{
+ unsigned long max_util = eenv_pd_max_util(eenv, pd_cpus, p, dst_cpu);
+ unsigned long busy_time = eenv->pd_busy_time;
+
+ if (dst_cpu >= 0)
+ busy_time = min(eenv->pd_cap, busy_time + eenv->task_busy_time);
+
+ return em_cpu_energy(pd->em_pd, max_util, busy_time, eenv->cpu_cap);
}
/*
*/
static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu)
{
+ struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_rq_mask);
unsigned long prev_delta = ULONG_MAX, best_delta = ULONG_MAX;
- struct root_domain *rd = cpu_rq(smp_processor_id())->rd;
- int cpu, best_energy_cpu = prev_cpu, target = -1;
- unsigned long cpu_cap, util, base_energy = 0;
+ struct root_domain *rd = this_rq()->rd;
+ int cpu, best_energy_cpu, target = -1;
struct sched_domain *sd;
struct perf_domain *pd;
+ struct energy_env eenv;
rcu_read_lock();
pd = rcu_dereference(rd->pd);
if (!task_util_est(p))
goto unlock;
+ eenv_task_busy_time(&eenv, p, prev_cpu);
+
for (; pd; pd = pd->next) {
- unsigned long cur_delta, spare_cap, max_spare_cap = 0;
+ unsigned long cpu_cap, cpu_thermal_cap, util;
+ unsigned long cur_delta, max_spare_cap = 0;
bool compute_prev_delta = false;
- unsigned long base_energy_pd;
int max_spare_cap_cpu = -1;
+ unsigned long base_energy;
+
+ cpumask_and(cpus, perf_domain_span(pd), cpu_online_mask);
+
+ if (cpumask_empty(cpus))
+ continue;
+
+ /* Account thermal pressure for the energy estimation */
+ cpu = cpumask_first(cpus);
+ cpu_thermal_cap = arch_scale_cpu_capacity(cpu);
+ cpu_thermal_cap -= arch_scale_thermal_pressure(cpu);
+
+ eenv.cpu_cap = cpu_thermal_cap;
+ eenv.pd_cap = 0;
+
+ for_each_cpu(cpu, cpus) {
+ eenv.pd_cap += cpu_thermal_cap;
+
+ if (!cpumask_test_cpu(cpu, sched_domain_span(sd)))
+ continue;
- for_each_cpu_and(cpu, perf_domain_span(pd), sched_domain_span(sd)) {
if (!cpumask_test_cpu(cpu, p->cpus_ptr))
continue;
util = cpu_util_next(cpu, p, cpu);
cpu_cap = capacity_of(cpu);
- spare_cap = cpu_cap;
- lsub_positive(&spare_cap, util);
/*
* Skip CPUs that cannot satisfy the capacity request.
if (!fits_capacity(util, cpu_cap))
continue;
+ lsub_positive(&cpu_cap, util);
+
if (cpu == prev_cpu) {
/* Always use prev_cpu as a candidate. */
compute_prev_delta = true;
- } else if (spare_cap > max_spare_cap) {
+ } else if (cpu_cap > max_spare_cap) {
/*
* Find the CPU with the maximum spare capacity
* in the performance domain.
*/
- max_spare_cap = spare_cap;
+ max_spare_cap = cpu_cap;
max_spare_cap_cpu = cpu;
}
}
if (max_spare_cap_cpu < 0 && !compute_prev_delta)
continue;
+ eenv_pd_busy_time(&eenv, cpus, p);
/* Compute the 'base' energy of the pd, without @p */
- base_energy_pd = compute_energy(p, -1, pd);
- base_energy += base_energy_pd;
+ base_energy = compute_energy(&eenv, pd, cpus, p, -1);
/* Evaluate the energy impact of using prev_cpu. */
if (compute_prev_delta) {
- prev_delta = compute_energy(p, prev_cpu, pd);
- if (prev_delta < base_energy_pd)
+ prev_delta = compute_energy(&eenv, pd, cpus, p,
+ prev_cpu);
+ /* CPU utilization has changed */
+ if (prev_delta < base_energy)
goto unlock;
- prev_delta -= base_energy_pd;
+ prev_delta -= base_energy;
best_delta = min(best_delta, prev_delta);
}
/* Evaluate the energy impact of using max_spare_cap_cpu. */
if (max_spare_cap_cpu >= 0) {
- cur_delta = compute_energy(p, max_spare_cap_cpu, pd);
- if (cur_delta < base_energy_pd)
+ cur_delta = compute_energy(&eenv, pd, cpus, p,
+ max_spare_cap_cpu);
+ /* CPU utilization has changed */
+ if (cur_delta < base_energy)
goto unlock;
- cur_delta -= base_energy_pd;
+ cur_delta -= base_energy;
if (cur_delta < best_delta) {
best_delta = cur_delta;
best_energy_cpu = max_spare_cap_cpu;
}
rcu_read_unlock();
- /*
- * Pick the best CPU if prev_cpu cannot be used, or if it saves at
- * least 6% of the energy used by prev_cpu.
- */
- if ((prev_delta == ULONG_MAX) ||
- (prev_delta - best_delta) > ((prev_delta + base_energy) >> 4))
+ if (best_delta < prev_delta)
target = best_energy_cpu;
return target;
*/
static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
{
+ struct sched_entity *se = &p->se;
+
/*
* As blocked tasks retain absolute vruntime the migration needs to
* deal with this by subtracting the old and adding the new
* the task on the new runqueue.
*/
if (READ_ONCE(p->__state) == TASK_WAKING) {
- struct sched_entity *se = &p->se;
struct cfs_rq *cfs_rq = cfs_rq_of(se);
- u64 min_vruntime;
-
-#ifndef CONFIG_64BIT
- u64 min_vruntime_copy;
-
- do {
- min_vruntime_copy = cfs_rq->min_vruntime_copy;
- smp_rmb();
- min_vruntime = cfs_rq->min_vruntime;
- } while (min_vruntime != min_vruntime_copy);
-#else
- min_vruntime = cfs_rq->min_vruntime;
-#endif
- se->vruntime -= min_vruntime;
+ se->vruntime -= u64_u32_load(cfs_rq->min_vruntime);
}
if (p->on_rq == TASK_ON_RQ_MIGRATING) {
* rq->lock and can modify state directly.
*/
lockdep_assert_rq_held(task_rq(p));
- detach_entity_cfs_rq(&p->se);
+ detach_entity_cfs_rq(se);
} else {
+ remove_entity_load_avg(se);
+
/*
- * We are supposed to update the task to "current" time, then
- * its up to date and ready to go to new CPU/cfs_rq. But we
- * have difficulty in getting what current time is, so simply
- * throw away the out-of-date time. This will result in the
- * wakee task is less decayed, but giving the wakee more load
- * sounds not bad.
+ * Here, the task's PELT values have been updated according to
+ * the current rq's clock. But if that clock hasn't been
+ * updated in a while, a substantial idle time will be missed,
+ * leading to an inflation after wake-up on the new rq.
+ *
+ * Estimate the missing time from the cfs_rq last_update_time
+ * and update sched_avg to improve the PELT continuity after
+ * migration.
*/
- remove_entity_load_avg(&p->se);
+ migrate_se_pelt_lag(se);
}
/* Tell new CPU we are migrated */
- p->se.avg.last_update_time = 0;
+ se->avg.last_update_time = 0;
/* We have migrated, no longer consider this task hot */
- p->se.exec_start = 0;
+ se->exec_start = 0;
update_scan_period(p, new_cpu);
}
*/
group_fully_busy,
/*
- * SD_ASYM_CPUCAPACITY only: One task doesn't fit with CPU's capacity
- * and must be migrated to a more powerful CPU.
+ * One task doesn't fit with CPU's capacity and must be migrated to a
+ * more powerful CPU.
*/
group_misfit_task,
/*
if (update_cfs_rq_load_avg(cfs_rq_clock_pelt(cfs_rq), cfs_rq)) {
update_tg_load_avg(cfs_rq);
+ if (cfs_rq->nr_running == 0)
+ update_idle_cfs_rq_clock_pelt(cfs_rq);
+
if (cfs_rq == &rq->cfs)
decayed = true;
}
/*
* group_has_capacity returns true if the group has spare capacity that could
* be used by some tasks.
- * We consider that a group has spare capacity if the * number of task is
+ * We consider that a group has spare capacity if the number of task is
* smaller than the number of CPUs or if the utilization is lower than the
* available capacity for CFS tasks.
* For the latter, we use a threshold to stabilize the state, to take into
return sched_asym_prefer(env->dst_cpu, group->asym_prefer_cpu);
}
+static inline bool
+sched_reduced_capacity(struct rq *rq, struct sched_domain *sd)
+{
+ /*
+ * When there is more than 1 task, the group_overloaded case already
+ * takes care of cpu with reduced capacity
+ */
+ if (rq->cfs.h_nr_running != 1)
+ return false;
+
+ return check_cpu_capacity(rq, sd);
+}
+
/**
* update_sg_lb_stats - Update sched_group's statistics for load balancing.
* @env: The load balancing environment.
for_each_cpu_and(i, sched_group_span(group), env->cpus) {
struct rq *rq = cpu_rq(i);
+ unsigned long load = cpu_load(rq);
- sgs->group_load += cpu_load(rq);
+ sgs->group_load += load;
sgs->group_util += cpu_util_cfs(i);
sgs->group_runnable += cpu_runnable(rq);
sgs->sum_h_nr_running += rq->cfs.h_nr_running;
if (local_group)
continue;
- /* Check for a misfit task on the cpu */
- if (env->sd->flags & SD_ASYM_CPUCAPACITY &&
- sgs->group_misfit_task_load < rq->misfit_task_load) {
- sgs->group_misfit_task_load = rq->misfit_task_load;
- *sg_status |= SG_OVERLOAD;
+ if (env->sd->flags & SD_ASYM_CPUCAPACITY) {
+ /* Check for a misfit task on the cpu */
+ if (sgs->group_misfit_task_load < rq->misfit_task_load) {
+ sgs->group_misfit_task_load = rq->misfit_task_load;
+ *sg_status |= SG_OVERLOAD;
+ }
+ } else if ((env->idle != CPU_NOT_IDLE) &&
+ sched_reduced_capacity(rq, env->sd)) {
+ /* Check for a task running on a CPU with reduced capacity */
+ if (sgs->group_misfit_task_load < load)
+ sgs->group_misfit_task_load = load;
}
}
* CPUs in the group should either be possible to resolve
* internally or be covered by avg_load imbalance (eventually).
*/
- if (sgs->group_type == group_misfit_task &&
+ if ((env->sd->flags & SD_ASYM_CPUCAPACITY) &&
+ (sgs->group_type == group_misfit_task) &&
(!capacity_greater(capacity_of(env->dst_cpu), sg->sgc->max_capacity) ||
sds->local_stat.group_type != group_has_spare))
return false;
return true;
}
-/*
- * Allow a NUMA imbalance if busy CPUs is less than 25% of the domain.
- * This is an approximation as the number of running tasks may not be
- * related to the number of busy CPUs due to sched_setaffinity.
- */
-static inline bool allow_numa_imbalance(int running, int imb_numa_nr)
-{
- return running <= imb_numa_nr;
-}
-
/*
* find_idlest_group() finds and returns the least busy CPU group within the
* domain.
break;
case group_has_spare:
+#ifdef CONFIG_NUMA
if (sd->flags & SD_NUMA) {
+ int imb_numa_nr = sd->imb_numa_nr;
#ifdef CONFIG_NUMA_BALANCING
int idlest_cpu;
/*
idlest_cpu = cpumask_first(sched_group_span(idlest));
if (cpu_to_node(idlest_cpu) == p->numa_preferred_nid)
return idlest;
-#endif
+#endif /* CONFIG_NUMA_BALANCING */
/*
* Otherwise, keep the task close to the wakeup source
* and improve locality if the number of running tasks
* would remain below threshold where an imbalance is
- * allowed. If there is a real need of migration,
- * periodic load balance will take care of it.
+ * allowed while accounting for the possibility the
+ * task is pinned to a subset of CPUs. If there is a
+ * real need of migration, periodic load balance will
+ * take care of it.
*/
- if (allow_numa_imbalance(local_sgs.sum_nr_running + 1, sd->imb_numa_nr))
+ if (p->nr_cpus_allowed != NR_CPUS) {
+ struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_rq_mask);
+
+ cpumask_and(cpus, sched_group_span(local), p->cpus_ptr);
+ imb_numa_nr = min(cpumask_weight(cpus), sd->imb_numa_nr);
+ }
+
+ imbalance = abs(local_sgs.idle_cpus - idlest_sgs.idle_cpus);
+ if (!adjust_numa_imbalance(imbalance,
+ local_sgs.sum_nr_running + 1,
+ imb_numa_nr)) {
return NULL;
+ }
}
+#endif /* CONFIG_NUMA */
/*
* Select group with highest number of idle CPUs. We could also
return idlest;
}
+static void update_idle_cpu_scan(struct lb_env *env,
+ unsigned long sum_util)
+{
+ struct sched_domain_shared *sd_share;
+ int llc_weight, pct;
+ u64 x, y, tmp;
+ /*
+ * Update the number of CPUs to scan in LLC domain, which could
+ * be used as a hint in select_idle_cpu(). The update of sd_share
+ * could be expensive because it is within a shared cache line.
+ * So the write of this hint only occurs during periodic load
+ * balancing, rather than CPU_NEWLY_IDLE, because the latter
+ * can fire way more frequently than the former.
+ */
+ if (!sched_feat(SIS_UTIL) || env->idle == CPU_NEWLY_IDLE)
+ return;
+
+ llc_weight = per_cpu(sd_llc_size, env->dst_cpu);
+ if (env->sd->span_weight != llc_weight)
+ return;
+
+ sd_share = rcu_dereference(per_cpu(sd_llc_shared, env->dst_cpu));
+ if (!sd_share)
+ return;
+
+ /*
+ * The number of CPUs to search drops as sum_util increases, when
+ * sum_util hits 85% or above, the scan stops.
+ * The reason to choose 85% as the threshold is because this is the
+ * imbalance_pct(117) when a LLC sched group is overloaded.
+ *
+ * let y = SCHED_CAPACITY_SCALE - p * x^2 [1]
+ * and y'= y / SCHED_CAPACITY_SCALE
+ *
+ * x is the ratio of sum_util compared to the CPU capacity:
+ * x = sum_util / (llc_weight * SCHED_CAPACITY_SCALE)
+ * y' is the ratio of CPUs to be scanned in the LLC domain,
+ * and the number of CPUs to scan is calculated by:
+ *
+ * nr_scan = llc_weight * y' [2]
+ *
+ * When x hits the threshold of overloaded, AKA, when
+ * x = 100 / pct, y drops to 0. According to [1],
+ * p should be SCHED_CAPACITY_SCALE * pct^2 / 10000
+ *
+ * Scale x by SCHED_CAPACITY_SCALE:
+ * x' = sum_util / llc_weight; [3]
+ *
+ * and finally [1] becomes:
+ * y = SCHED_CAPACITY_SCALE -
+ * x'^2 * pct^2 / (10000 * SCHED_CAPACITY_SCALE) [4]
+ *
+ */
+ /* equation [3] */
+ x = sum_util;
+ do_div(x, llc_weight);
+
+ /* equation [4] */
+ pct = env->sd->imbalance_pct;
+ tmp = x * x * pct * pct;
+ do_div(tmp, 10000 * SCHED_CAPACITY_SCALE);
+ tmp = min_t(long, tmp, SCHED_CAPACITY_SCALE);
+ y = SCHED_CAPACITY_SCALE - tmp;
+
+ /* equation [2] */
+ y *= llc_weight;
+ do_div(y, SCHED_CAPACITY_SCALE);
+ if ((int)y != sd_share->nr_idle_scan)
+ WRITE_ONCE(sd_share->nr_idle_scan, (int)y);
+}
+
/**
* update_sd_lb_stats - Update sched_domain's statistics for load balancing.
* @env: The load balancing environment.
struct sched_group *sg = env->sd->groups;
struct sg_lb_stats *local = &sds->local_stat;
struct sg_lb_stats tmp_sgs;
+ unsigned long sum_util = 0;
int sg_status = 0;
do {
sds->total_load += sgs->group_load;
sds->total_capacity += sgs->group_capacity;
+ sum_util += sgs->group_util;
sg = sg->next;
} while (sg != env->sd->groups);
WRITE_ONCE(rd->overutilized, SG_OVERUTILIZED);
trace_sched_overutilized_tp(rd, SG_OVERUTILIZED);
}
-}
-
-#define NUMA_IMBALANCE_MIN 2
-
-static inline long adjust_numa_imbalance(int imbalance,
- int dst_running, int imb_numa_nr)
-{
- if (!allow_numa_imbalance(dst_running, imb_numa_nr))
- return imbalance;
- /*
- * Allow a small imbalance based on a simple pair of communicating
- * tasks that remain local when the destination is lightly loaded.
- */
- if (imbalance <= NUMA_IMBALANCE_MIN)
- return 0;
-
- return imbalance;
+ update_idle_cpu_scan(env, sum_util);
}
/**
busiest = &sds->busiest_stat;
if (busiest->group_type == group_misfit_task) {
- /* Set imbalance to allow misfit tasks to be balanced. */
- env->migration_type = migrate_misfit;
- env->imbalance = 1;
+ if (env->sd->flags & SD_ASYM_CPUCAPACITY) {
+ /* Set imbalance to allow misfit tasks to be balanced. */
+ env->migration_type = migrate_misfit;
+ env->imbalance = 1;
+ } else {
+ /*
+ * Set load imbalance to allow moving task from cpu
+ * with reduced capacity.
+ */
+ env->migration_type = migrate_load;
+ env->imbalance = busiest->group_misfit_task_load;
+ }
return;
}
*/
env->migration_type = migrate_task;
lsub_positive(&nr_diff, local->sum_nr_running);
- env->imbalance = nr_diff >> 1;
+ env->imbalance = nr_diff;
} else {
/*
* idle cpus.
*/
env->migration_type = migrate_task;
- env->imbalance = max_t(long, 0, (local->idle_cpus -
- busiest->idle_cpus) >> 1);
+ env->imbalance = max_t(long, 0,
+ (local->idle_cpus - busiest->idle_cpus));
}
+#ifdef CONFIG_NUMA
/* Consider allowing a small imbalance between NUMA groups */
if (env->sd->flags & SD_NUMA) {
env->imbalance = adjust_numa_imbalance(env->imbalance,
- local->sum_nr_running + 1, env->sd->imb_numa_nr);
+ local->sum_nr_running + 1,
+ env->sd->imb_numa_nr);
}
+#endif
+
+ /* Number of tasks to move to restore balance */
+ env->imbalance >>= 1;
return;
}
/*
* In the newly idle case, we will allow all the CPUs
* to do the newly idle load balance.
+ *
+ * However, we bail out if we already have tasks or a wakeup pending,
+ * to optimize wakeup latency.
*/
- if (env->idle == CPU_NEWLY_IDLE)
+ if (env->idle == CPU_NEWLY_IDLE) {
+ if (env->dst_rq->nr_running > 0 || env->dst_rq->ttwu_pending)
+ return 0;
return 1;
+ }
/* Try to find first idle CPU */
for_each_cpu_and(cpu, group_balance_mask(sg), env->cpus) {
*/
static void propagate_entity_cfs_rq(struct sched_entity *se)
{
- struct cfs_rq *cfs_rq;
+ struct cfs_rq *cfs_rq = cfs_rq_of(se);
- list_add_leaf_cfs_rq(cfs_rq_of(se));
+ if (cfs_rq_throttled(cfs_rq))
+ return;
+
+ if (!throttled_hierarchy(cfs_rq))
+ list_add_leaf_cfs_rq(cfs_rq);
/* Start to propagate at parent */
se = se->parent;
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- if (!cfs_rq_throttled(cfs_rq)){
- update_load_avg(cfs_rq, se, UPDATE_TG);
- list_add_leaf_cfs_rq(cfs_rq);
- continue;
- }
+ update_load_avg(cfs_rq, se, UPDATE_TG);
- if (list_add_leaf_cfs_rq(cfs_rq))
+ if (cfs_rq_throttled(cfs_rq))
break;
+
+ if (!throttled_hierarchy(cfs_rq))
+ list_add_leaf_cfs_rq(cfs_rq);
}
}
#else
void init_cfs_rq(struct cfs_rq *cfs_rq)
{
cfs_rq->tasks_timeline = RB_ROOT_CACHED;
- cfs_rq->min_vruntime = (u64)(-(1LL << 20));
-#ifndef CONFIG_64BIT
- cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime;
-#endif
+ u64_u32_store(cfs_rq->min_vruntime, (u64)(-(1LL << 20)));
#ifdef CONFIG_SMP
raw_spin_lock_init(&cfs_rq->removed.lock);
#endif
/*
* When doing wakeups, attempt to limit superfluous scans of the LLC domain.
*/
-SCHED_FEAT(SIS_PROP, true)
+SCHED_FEAT(SIS_PROP, false)
+SCHED_FEAT(SIS_UTIL, true)
/*
* Issue a WARN when we do multiple update_rq_clock() calls
WRITE_ONCE(avg->util_est.enqueued, enqueued);
}
+static inline u64 rq_clock_pelt(struct rq *rq)
+{
+ lockdep_assert_rq_held(rq);
+ assert_clock_updated(rq);
+
+ return rq->clock_pelt - rq->lost_idle_time;
+}
+
+/* The rq is idle, we can sync to clock_task */
+static inline void _update_idle_rq_clock_pelt(struct rq *rq)
+{
+ rq->clock_pelt = rq_clock_task(rq);
+
+ u64_u32_store(rq->clock_idle, rq_clock(rq));
+ /* Paired with smp_rmb in migrate_se_pelt_lag() */
+ smp_wmb();
+ u64_u32_store(rq->clock_pelt_idle, rq_clock_pelt(rq));
+}
+
/*
* The clock_pelt scales the time to reflect the effective amount of
* computation done during the running delta time but then sync back to
static inline void update_rq_clock_pelt(struct rq *rq, s64 delta)
{
if (unlikely(is_idle_task(rq->curr))) {
- /* The rq is idle, we can sync to clock_task */
- rq->clock_pelt = rq_clock_task(rq);
+ _update_idle_rq_clock_pelt(rq);
return;
}
*/
if (util_sum >= divider)
rq->lost_idle_time += rq_clock_task(rq) - rq->clock_pelt;
+
+ _update_idle_rq_clock_pelt(rq);
}
-static inline u64 rq_clock_pelt(struct rq *rq)
+#ifdef CONFIG_CFS_BANDWIDTH
+static inline void update_idle_cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
- lockdep_assert_rq_held(rq);
- assert_clock_updated(rq);
+ u64 throttled;
- return rq->clock_pelt - rq->lost_idle_time;
+ if (unlikely(cfs_rq->throttle_count))
+ throttled = U64_MAX;
+ else
+ throttled = cfs_rq->throttled_clock_pelt_time;
+
+ u64_u32_store(cfs_rq->throttled_pelt_idle, throttled);
}
-#ifdef CONFIG_CFS_BANDWIDTH
/* rq->task_clock normalized against any time this cfs_rq has spent throttled */
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
return rq_clock_pelt(rq_of(cfs_rq)) - cfs_rq->throttled_clock_pelt_time;
}
#else
+static inline void update_idle_cfs_rq_clock_pelt(struct cfs_rq *cfs_rq) { }
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
return rq_clock_pelt(rq_of(cfs_rq));
static inline void
update_idle_rq_clock_pelt(struct rq *rq) { }
+static inline void update_idle_cfs_rq_clock_pelt(struct cfs_rq *cfs_rq) { }
#endif
#endif /* CONFIG_SMP */
static void enqueue_top_rt_rq(struct rt_rq *rt_rq);
-static void dequeue_top_rt_rq(struct rt_rq *rt_rq);
+static void dequeue_top_rt_rq(struct rt_rq *rt_rq, unsigned int count);
static inline int on_rt_rq(struct sched_rt_entity *rt_se)
{
rt_se = rt_rq->tg->rt_se[cpu];
if (!rt_se) {
- dequeue_top_rt_rq(rt_rq);
+ dequeue_top_rt_rq(rt_rq, rt_rq->rt_nr_running);
/* Kick cpufreq (see the comment in kernel/sched/sched.h). */
cpufreq_update_util(rq_of_rt_rq(rt_rq), 0);
}
static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
{
- dequeue_top_rt_rq(rt_rq);
+ dequeue_top_rt_rq(rt_rq, rt_rq->rt_nr_running);
}
static inline int rt_rq_throttled(struct rt_rq *rt_rq)
}
static void
-dequeue_top_rt_rq(struct rt_rq *rt_rq)
+dequeue_top_rt_rq(struct rt_rq *rt_rq, unsigned int count)
{
struct rq *rq = rq_of_rt_rq(rt_rq);
BUG_ON(!rq->nr_running);
- sub_nr_running(rq, rt_rq->rt_nr_running);
+ sub_nr_running(rq, count);
rt_rq->rt_queued = 0;
}
static void dequeue_rt_stack(struct sched_rt_entity *rt_se, unsigned int flags)
{
struct sched_rt_entity *back = NULL;
+ unsigned int rt_nr_running;
for_each_sched_rt_entity(rt_se) {
rt_se->back = back;
back = rt_se;
}
- dequeue_top_rt_rq(rt_rq_of_se(back));
+ rt_nr_running = rt_rq_of_se(back)->rt_nr_running;
for (rt_se = back; rt_se; rt_se = rt_se->back) {
if (on_rt_rq(rt_se))
__dequeue_rt_entity(rt_se, flags);
}
+
+ dequeue_top_rt_rq(rt_rq_of_se(back), rt_nr_running);
}
static void enqueue_rt_entity(struct sched_rt_entity *rt_se, unsigned int flags)
#endif /* CONFIG_CGROUP_SCHED */
+/*
+ * u64_u32_load/u64_u32_store
+ *
+ * Use a copy of a u64 value to protect against data race. This is only
+ * applicable for 32-bits architectures.
+ */
+#ifdef CONFIG_64BIT
+# define u64_u32_load_copy(var, copy) var
+# define u64_u32_store_copy(var, copy, val) (var = val)
+#else
+# define u64_u32_load_copy(var, copy) \
+({ \
+ u64 __val, __val_copy; \
+ do { \
+ __val_copy = copy; \
+ /* \
+ * paired with u64_u32_store_copy(), ordering access \
+ * to var and copy. \
+ */ \
+ smp_rmb(); \
+ __val = var; \
+ } while (__val != __val_copy); \
+ __val; \
+})
+# define u64_u32_store_copy(var, copy, val) \
+do { \
+ typeof(val) __val = (val); \
+ var = __val; \
+ /* \
+ * paired with u64_u32_load_copy(), ordering access to var and \
+ * copy. \
+ */ \
+ smp_wmb(); \
+ copy = __val; \
+} while (0)
+#endif
+# define u64_u32_load(var) u64_u32_load_copy(var, var##_copy)
+# define u64_u32_store(var, val) u64_u32_store_copy(var, var##_copy, val)
+
/* CFS-related fields in a runqueue */
struct cfs_rq {
struct load_weight load;
*/
struct sched_avg avg;
#ifndef CONFIG_64BIT
- u64 load_last_update_time_copy;
+ u64 last_update_time_copy;
#endif
struct {
raw_spinlock_t lock ____cacheline_aligned;
int runtime_enabled;
s64 runtime_remaining;
+ u64 throttled_pelt_idle;
+#ifndef CONFIG_64BIT
+ u64 throttled_pelt_idle_copy;
+#endif
u64 throttled_clock;
u64 throttled_clock_pelt;
u64 throttled_clock_pelt_time;
u64 clock_task ____cacheline_aligned;
u64 clock_pelt;
unsigned long lost_idle_time;
+ u64 clock_pelt_idle;
+ u64 clock_idle;
+#ifndef CONFIG_64BIT
+ u64 clock_pelt_idle_copy;
+ u64 clock_idle_copy;
+#endif
atomic_t nr_iowait;
return to_cpumask(sg->sgc->cpumask);
}
-/**
- * group_first_cpu - Returns the first CPU in the cpumask of a sched_group.
- * @group: The group whose first CPU is to be returned.
- */
-static inline unsigned int group_first_cpu(struct sched_group *group)
-{
- return cpumask_first(sched_group_span(group));
-}
-
extern int group_balance_cpu(struct sched_group *sg);
#ifdef CONFIG_SCHED_DEBUG
#define WF_SYNC 0x10 /* Waker goes to sleep after wakeup */
#define WF_MIGRATED 0x20 /* Internal use, task got migrated */
-#define WF_ON_CPU 0x40 /* Wakee is on_cpu */
#ifdef CONFIG_SMP
static_assert(WF_EXEC == SD_BALANCE_EXEC);
};
unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
- unsigned long max, enum cpu_util_type type,
+ enum cpu_util_type type,
struct task_struct *p);
static inline unsigned long cpu_bw_dl(struct rq *rq)
/*
* For a single LLC per node, allow an
- * imbalance up to 25% of the node. This is an
- * arbitrary cutoff based on SMT-2 to balance
- * between memory bandwidth and avoiding
- * premature sharing of HT resources and SMT-4
- * or SMT-8 *may* benefit from a different
- * cutoff.
+ * imbalance up to 12.5% of the node. This is
+ * arbitrary cutoff based two factors -- SMT and
+ * memory channels. For SMT-2, the intent is to
+ * avoid premature sharing of HT resources but
+ * SMT-4 or SMT-8 *may* benefit from a different
+ * cutoff. For memory channels, this is a very
+ * rough estimate of how many channels may be
+ * active and is based on recent CPUs with
+ * many cores.
*
* For multiple LLCs, allow an imbalance
* until multiple tasks would share an LLC
* on one node while LLCs on another node
- * remain idle.
+ * remain idle. This assumes that there are
+ * enough logical CPUs per LLC to avoid SMT
+ * factors and that there is a correlation
+ * between LLCs and memory channels.
*/
nr_llcs = sd->span_weight / child->span_weight;
if (nr_llcs == 1)
- imb = sd->span_weight >> 2;
+ imb = sd->span_weight >> 3;
else
imb = nr_llcs;
+ imb = max(1U, imb);
sd->imb_numa_nr = imb;
/* Set span based on the first NUMA domain. */
rcu_assign_pointer(watch->queue, wqueue);
}
+static int add_one_watch(struct watch *watch, struct watch_list *wlist, struct watch_queue *wqueue)
+{
+ const struct cred *cred;
+ struct watch *w;
+
+ hlist_for_each_entry(w, &wlist->watchers, list_node) {
+ struct watch_queue *wq = rcu_access_pointer(w->queue);
+ if (wqueue == wq && watch->id == w->id)
+ return -EBUSY;
+ }
+
+ cred = current_cred();
+ if (atomic_inc_return(&cred->user->nr_watches) > task_rlimit(current, RLIMIT_NOFILE)) {
+ atomic_dec(&cred->user->nr_watches);
+ return -EAGAIN;
+ }
+
+ watch->cred = get_cred(cred);
+ rcu_assign_pointer(watch->watch_list, wlist);
+
+ kref_get(&wqueue->usage);
+ kref_get(&watch->usage);
+ hlist_add_head(&watch->queue_node, &wqueue->watches);
+ hlist_add_head_rcu(&watch->list_node, &wlist->watchers);
+ return 0;
+}
+
/**
* add_watch_to_object - Add a watch on an object to a watch list
* @watch: The watch to add
*/
int add_watch_to_object(struct watch *watch, struct watch_list *wlist)
{
- struct watch_queue *wqueue = rcu_access_pointer(watch->queue);
- struct watch *w;
-
- hlist_for_each_entry(w, &wlist->watchers, list_node) {
- struct watch_queue *wq = rcu_access_pointer(w->queue);
- if (wqueue == wq && watch->id == w->id)
- return -EBUSY;
- }
-
- watch->cred = get_current_cred();
- rcu_assign_pointer(watch->watch_list, wlist);
+ struct watch_queue *wqueue;
+ int ret = -ENOENT;
- if (atomic_inc_return(&watch->cred->user->nr_watches) >
- task_rlimit(current, RLIMIT_NOFILE)) {
- atomic_dec(&watch->cred->user->nr_watches);
- put_cred(watch->cred);
- return -EAGAIN;
- }
+ rcu_read_lock();
+ wqueue = rcu_access_pointer(watch->queue);
if (lock_wqueue(wqueue)) {
- kref_get(&wqueue->usage);
- kref_get(&watch->usage);
- hlist_add_head(&watch->queue_node, &wqueue->watches);
+ spin_lock(&wlist->lock);
+ ret = add_one_watch(watch, wlist, wqueue);
+ spin_unlock(&wlist->lock);
unlock_wqueue(wqueue);
}
- hlist_add_head(&watch->list_node, &wlist->watchers);
- return 0;
+ rcu_read_unlock();
+ return ret;
}
EXPORT_SYMBOL(add_watch_to_object);
for_each_pool_worker(worker, pool) {
kthread_set_per_cpu(worker->task, -1);
- WARN_ON_ONCE(set_cpus_allowed_ptr(worker->task, wq_unbound_cpumask) < 0);
+ if (cpumask_intersects(wq_unbound_cpumask, cpu_active_mask))
+ WARN_ON_ONCE(set_cpus_allowed_ptr(worker->task, wq_unbound_cpumask) < 0);
+ else
+ WARN_ON_ONCE(set_cpus_allowed_ptr(worker->task, cpu_possible_mask) < 0);
}
mutex_unlock(&wq_pool_attach_mutex);
* belongs to this folio.
*/
if (unlikely(page_folio(page) != folio)) {
- folio_put_refs(folio, refs);
+ if (!put_devmap_managed_page_refs(&folio->page, refs))
+ folio_put_refs(folio, refs);
goto retry;
}
refs *= GUP_PIN_COUNTING_BIAS;
}
- folio_put_refs(folio, refs);
+ if (!put_devmap_managed_page_refs(&folio->page, refs))
+ folio_put_refs(folio, refs);
}
/**
unsigned long end, unsigned long hmm_pfns[], pmd_t pmd);
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline bool hmm_is_device_private_entry(struct hmm_range *range,
- swp_entry_t entry)
-{
- return is_device_private_entry(entry) &&
- pfn_swap_entry_to_page(entry)->pgmap->owner ==
- range->dev_private_owner;
-}
-
static inline unsigned long pte_to_hmm_pfn_flags(struct hmm_range *range,
pte_t pte)
{
swp_entry_t entry = pte_to_swp_entry(pte);
/*
- * Never fault in device private pages, but just report
- * the PFN even if not present.
+ * Don't fault in device private pages owned by the caller,
+ * just report the PFN.
*/
- if (hmm_is_device_private_entry(range, entry)) {
+ if (is_device_private_entry(entry) &&
+ pfn_swap_entry_to_page(entry)->pgmap->owner ==
+ range->dev_private_owner) {
cpu_flags = HMM_PFN_VALID;
if (is_writable_device_private_entry(entry))
cpu_flags |= HMM_PFN_WRITE;
if (!non_swap_entry(entry))
goto fault;
+ if (is_device_private_entry(entry))
+ goto fault;
+
if (is_device_exclusive_entry(entry))
goto fault;
* sharing with another vma.
*/
;
- } else if (unlikely(is_hugetlb_entry_migration(entry) ||
- is_hugetlb_entry_hwpoisoned(entry))) {
+ } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) {
+ bool uffd_wp = huge_pte_uffd_wp(entry);
+
+ if (!userfaultfd_wp(dst_vma) && uffd_wp)
+ entry = huge_pte_clear_uffd_wp(entry);
+ set_huge_pte_at(dst, addr, dst_pte, entry);
+ } else if (unlikely(is_hugetlb_entry_migration(entry))) {
swp_entry_t swp_entry = pte_to_swp_entry(entry);
bool uffd_wp = huge_pte_uffd_wp(entry);
page = alloc_huge_page(dst_vma, dst_addr, 0);
if (IS_ERR(page)) {
+ put_page(*pagep);
ret = -ENOMEM;
*pagep = NULL;
goto out;
#include <linux/io.h>
#include <linux/export.h>
-void __iomem *ioremap_prot(phys_addr_t addr, size_t size, unsigned long prot)
+void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
+ unsigned long prot)
{
unsigned long offset, vaddr;
phys_addr_t last_addr;
struct vm_struct *area;
/* Disallow wrap-around or zero size */
- last_addr = addr + size - 1;
- if (!size || last_addr < addr)
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
return NULL;
/* Page-align mappings */
- offset = addr & (~PAGE_MASK);
- addr -= offset;
+ offset = phys_addr & (~PAGE_MASK);
+ phys_addr -= offset;
size = PAGE_ALIGN(size + offset);
+ if (!ioremap_allowed(phys_addr, size, prot))
+ return NULL;
+
area = get_vm_area_caller(size, VM_IOREMAP,
__builtin_return_address(0));
if (!area)
return NULL;
vaddr = (unsigned long)area->addr;
+ area->phys_addr = phys_addr;
- if (ioremap_page_range(vaddr, vaddr + size, addr, __pgprot(prot))) {
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr,
+ __pgprot(prot))) {
free_vm_area(area);
return NULL;
}
void iounmap(volatile void __iomem *addr)
{
- vunmap((void *)((unsigned long)addr & PAGE_MASK));
+ void *vaddr = (void *)((unsigned long)addr & PAGE_MASK);
+
+ if (!iounmap_allowed(vaddr))
+ return;
+
+ if (is_vmalloc_addr(vaddr))
+ vunmap(vaddr);
}
EXPORT_SYMBOL(iounmap);
return;
tag = kasan_random_tag();
+ kasan_unpoison(set_tag(page_address(page), tag),
+ PAGE_SIZE << order, init);
for (i = 0; i < (1 << order); i++)
page_kasan_tag_set(page + i, tag);
- kasan_unpoison(page_address(page), PAGE_SIZE << order, init);
}
void __kasan_poison_pages(struct page *page, unsigned int order, bool init)
addr += 2 * PAGE_SIZE;
}
- /*
- * The pool is live and will never be deallocated from this point on.
- * Remove the pool object from the kmemleak object tree, as it would
- * otherwise overlap with allocations returned by kfence_alloc(), which
- * are registered with kmemleak through the slab post-alloc hook.
- */
- kmemleak_free(__kfence_pool);
-
return 0;
}
addr = kfence_init_pool();
- if (!addr)
+ if (!addr) {
+ /*
+ * The pool is live and will never be deallocated from this point on.
+ * Ignore the pool object from the kmemleak phys object tree, as it would
+ * otherwise overlap with allocations returned by kfence_alloc(), which
+ * are registered with kmemleak through the slab post-alloc hook.
+ */
+ kmemleak_ignore_phys(__pa(__kfence_pool));
return true;
+ }
/*
* Only release unprotected pages, and do not try to go back and change
pte_t entry;
VM_BUG_ON(!(vmf->flags & FAULT_FLAG_WRITE));
- VM_BUG_ON(PageAnon(page) && !PageAnonExclusive(page));
+ VM_BUG_ON(page && PageAnon(page) && !PageAnonExclusive(page));
/*
* Clear the pages cpupid information as the existing
return VM_FAULT_OOM;
}
- /* See comment in handle_pte_fault() */
+ /*
+ * See comment in handle_pte_fault() for how this scenario happens, we
+ * need to return NOPAGE so that we drop this page.
+ */
if (pmd_devmap_trans_unstable(vmf->pmd))
- return 0;
+ return VM_FAULT_NOPAGE;
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
}
#ifdef CONFIG_FS_DAX
-bool __put_devmap_managed_page(struct page *page)
+bool __put_devmap_managed_page_refs(struct page *page, int refs)
{
if (page->pgmap->type != MEMORY_DEVICE_FS_DAX)
return false;
* refcount is 1, then the page is free and the refcount is
* stable because nobody holds a reference on the page.
*/
- if (page_ref_dec_return(page) == 1)
+ if (page_ref_sub_return(page, refs) == 1)
wake_up_var(&page->_refcount);
return true;
}
-EXPORT_SYMBOL(__put_devmap_managed_page);
+EXPORT_SYMBOL(__put_devmap_managed_page_refs);
#endif /* CONFIG_FS_DAX */
}
#endif /* CONFIG_DEBUG_VM */
-static inline bool should_skip_kasan_unpoison(gfp_t flags, bool init_tags)
+static inline bool should_skip_kasan_unpoison(gfp_t flags)
{
/* Don't skip if a software KASAN mode is enabled. */
if (IS_ENABLED(CONFIG_KASAN_GENERIC) ||
return true;
/*
- * With hardware tag-based KASAN enabled, skip if either:
- *
- * 1. Memory tags have already been cleared via tag_clear_highpage().
- * 2. Skipping has been requested via __GFP_SKIP_KASAN_UNPOISON.
+ * With hardware tag-based KASAN enabled, skip if this has been
+ * requested via __GFP_SKIP_KASAN_UNPOISON.
*/
- return init_tags || (flags & __GFP_SKIP_KASAN_UNPOISON);
+ return flags & __GFP_SKIP_KASAN_UNPOISON;
}
static inline bool should_skip_init(gfp_t flags)
bool init = !want_init_on_free() && want_init_on_alloc(gfp_flags) &&
!should_skip_init(gfp_flags);
bool init_tags = init && (gfp_flags & __GFP_ZEROTAGS);
+ int i;
set_page_private(page, 0);
set_page_refcounted(page);
* should be initialized as well).
*/
if (init_tags) {
- int i;
-
/* Initialize both memory and tags. */
for (i = 0; i != 1 << order; ++i)
tag_clear_highpage(page + i);
/* Note that memory is already initialized by the loop above. */
init = false;
}
- if (!should_skip_kasan_unpoison(gfp_flags, init_tags)) {
+ if (!should_skip_kasan_unpoison(gfp_flags)) {
/* Unpoison shadow memory or set memory tags. */
kasan_unpoison_pages(page, order, init);
/* Note that memory is already initialized by KASAN. */
if (kasan_has_integrated_init())
init = false;
+ } else {
+ /* Ensure page_address() dereferencing does not fault. */
+ for (i = 0; i != 1 << order; ++i)
+ page_kasan_tag_reset(page + i);
}
/* If memory is still not initialized, do it now. */
if (init)
* need to be calculated.
*/
if (!order) {
- long fast_free;
+ long usable_free;
+ long reserved;
+
+ usable_free = free_pages;
+ reserved = __zone_watermark_unusable_free(z, 0, alloc_flags);
- fast_free = free_pages;
- fast_free -= __zone_watermark_unusable_free(z, 0, alloc_flags);
- if (fast_free > mark + z->lowmem_reserve[highest_zoneidx])
+ /* reserved may over estimate high-atomic reserves. */
+ usable_free -= min(usable_free, reserved);
+ if (usable_free > mark + z->lowmem_reserve[highest_zoneidx])
return true;
}
gfp_t gfp = vmf->gfp_mask;
unsigned long addr;
struct page *page;
+ vm_fault_t ret;
int err;
if (((loff_t)vmf->pgoff << PAGE_SHIFT) >= i_size_read(inode))
return vmf_error(-EINVAL);
+ filemap_invalidate_lock_shared(mapping);
+
retry:
page = find_lock_page(mapping, offset);
if (!page) {
page = alloc_page(gfp | __GFP_ZERO);
- if (!page)
- return VM_FAULT_OOM;
+ if (!page) {
+ ret = VM_FAULT_OOM;
+ goto out;
+ }
err = set_direct_map_invalid_noflush(page);
if (err) {
put_page(page);
- return vmf_error(err);
+ ret = vmf_error(err);
+ goto out;
}
__SetPageUptodate(page);
if (err == -EEXIST)
goto retry;
- return vmf_error(err);
+ ret = vmf_error(err);
+ goto out;
}
addr = (unsigned long)page_address(page);
}
vmf->page = page;
- return VM_FAULT_LOCKED;
+ ret = VM_FAULT_LOCKED;
+
+out:
+ filemap_invalidate_unlock_shared(mapping);
+ return ret;
}
static const struct vm_operations_struct secretmem_vm_ops = {
struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = d_inode(dentry);
+ struct address_space *mapping = inode->i_mapping;
unsigned int ia_valid = iattr->ia_valid;
+ int ret;
+
+ filemap_invalidate_lock(mapping);
if ((ia_valid & ATTR_SIZE) && inode->i_size)
- return -EINVAL;
+ ret = -EINVAL;
+ else
+ ret = simple_setattr(mnt_userns, dentry, iattr);
- return simple_setattr(mnt_userns, dentry, iattr);
+ filemap_invalidate_unlock(mapping);
+
+ return ret;
}
static const struct inode_operations secretmem_iops = {
break;
case Opt_nr_blocks:
ctx->blocks = memparse(param->string, &rest);
- if (*rest)
+ if (*rest || ctx->blocks > S64_MAX)
goto bad_value;
ctx->seen |= SHMEM_SEEN_BLOCKS;
break;
raw_spin_lock(&sbinfo->stat_lock);
inodes = sbinfo->max_inodes - sbinfo->free_inodes;
- if (ctx->blocks > S64_MAX) {
- err = "Number of blocks too large";
- goto out;
- }
+
if ((ctx->seen & SHMEM_SEEN_BLOCKS) && ctx->blocks) {
if (!sbinfo->max_blocks) {
err = "Cannot retroactively limit size";
}
/* ___cache_alloc_node can fall back to other nodes */
ptr = ____cache_alloc_node(cachep, flags, nodeid);
- out:
+out:
local_irq_restore(save_flags);
ptr = cache_alloc_debugcheck_after(cachep, flags, ptr, caller);
init = slab_want_init_on_alloc(flags, cachep);
if (!objp)
objp = ____cache_alloc_node(cache, flags, numa_mem_id());
- out:
+out:
return objp;
}
#else
{
bool init;
+ memcg_slab_free_hook(cachep, virt_to_slab(objp), &objp, 1);
+
if (is_kfence_address(objp)) {
kmemleak_free_recursive(objp, cachep->flags);
- memcg_slab_free_hook(cachep, &objp, 1);
__kfence_free(objp);
return;
}
check_irq_off();
kmemleak_free_recursive(objp, cachep->flags);
objp = cache_free_debugcheck(cachep, objp, caller);
- memcg_slab_free_hook(cachep, &objp, 1);
/*
* Skip calling cache_free_alien() when the platform is not numa.
{
void *ret = slab_alloc(cachep, lru, flags, cachep->object_size, _RET_IP_);
- trace_kmem_cache_alloc(_RET_IP_, ret,
+ trace_kmem_cache_alloc(_RET_IP_, ret, cachep,
cachep->object_size, cachep->size, flags);
return ret;
local_irq_enable();
cache_alloc_debugcheck_after_bulk(s, flags, i, p, _RET_IP_);
slab_post_alloc_hook(s, objcg, flags, i, p, false);
- __kmem_cache_free_bulk(s, i, p);
+ kmem_cache_free_bulk(s, i, p);
return 0;
}
EXPORT_SYMBOL(kmem_cache_alloc_bulk);
ret = slab_alloc(cachep, NULL, flags, size, _RET_IP_);
ret = kasan_kmalloc(cachep, ret, size, flags);
- trace_kmalloc(_RET_IP_, ret,
+ trace_kmalloc(_RET_IP_, ret, cachep,
size, cachep->size, flags);
return ret;
}
{
void *ret = slab_alloc_node(cachep, flags, nodeid, cachep->object_size, _RET_IP_);
- trace_kmem_cache_alloc_node(_RET_IP_, ret,
+ trace_kmem_cache_alloc_node(_RET_IP_, ret, cachep,
cachep->object_size, cachep->size,
flags, nodeid);
ret = slab_alloc_node(cachep, flags, nodeid, size, _RET_IP_);
ret = kasan_kmalloc(cachep, ret, size, flags);
- trace_kmalloc_node(_RET_IP_, ret,
+ trace_kmalloc_node(_RET_IP_, ret, cachep,
size, cachep->size,
flags, nodeid);
return ret;
ret = slab_alloc(cachep, NULL, flags, size, caller);
ret = kasan_kmalloc(cachep, ret, size, flags);
- trace_kmalloc(caller, ret,
+ trace_kmalloc(caller, ret, cachep,
size, cachep->size, flags);
return ret;
ssize_t slabinfo_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos);
-/*
- * Generic implementation of bulk operations
- * These are useful for situations in which the allocator cannot
- * perform optimizations. In that case segments of the object listed
- * may be allocated or freed using these operations.
- */
-void __kmem_cache_free_bulk(struct kmem_cache *, size_t, void **);
-int __kmem_cache_alloc_bulk(struct kmem_cache *, gfp_t, size_t, void **);
-
static inline enum node_stat_item cache_vmstat_idx(struct kmem_cache *s)
{
return (s->flags & SLAB_RECLAIM_ACCOUNT) ?
obj_cgroup_put(objcg);
}
-static inline void memcg_slab_free_hook(struct kmem_cache *s_orig,
+static inline void memcg_slab_free_hook(struct kmem_cache *s, struct slab *slab,
void **p, int objects)
{
- struct kmem_cache *s;
struct obj_cgroup **objcgs;
- struct obj_cgroup *objcg;
- struct slab *slab;
- unsigned int off;
int i;
if (!memcg_kmem_enabled())
return;
- for (i = 0; i < objects; i++) {
- if (unlikely(!p[i]))
- continue;
-
- slab = virt_to_slab(p[i]);
- /* we could be given a kmalloc_large() object, skip those */
- if (!slab)
- continue;
-
- objcgs = slab_objcgs(slab);
- if (!objcgs)
- continue;
+ objcgs = slab_objcgs(slab);
+ if (!objcgs)
+ return;
- if (!s_orig)
- s = slab->slab_cache;
- else
- s = s_orig;
+ for (i = 0; i < objects; i++) {
+ struct obj_cgroup *objcg;
+ unsigned int off;
off = obj_to_index(s, slab, p[i]);
objcg = objcgs[off];
{
}
-static inline void memcg_slab_free_hook(struct kmem_cache *s,
+static inline void memcg_slab_free_hook(struct kmem_cache *s, struct slab *slab,
void **p, int objects)
{
}
#include <linux/memcontrol.h>
#include <linux/stackdepot.h>
-#define CREATE_TRACE_POINTS
-#include <trace/events/kmem.h>
-
#include "internal.h"
-
#include "slab.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/kmem.h>
+
enum slab_state slab_state;
LIST_HEAD(slab_caches);
DEFINE_MUTEX(slab_mutex);
}
#endif
-void __kmem_cache_free_bulk(struct kmem_cache *s, size_t nr, void **p)
-{
- size_t i;
-
- for (i = 0; i < nr; i++) {
- if (s)
- kmem_cache_free(s, p[i]);
- else
- kfree(p[i]);
- }
-}
-
-int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t nr,
- void **p)
-{
- size_t i;
-
- for (i = 0; i < nr; i++) {
- void *x = p[i] = kmem_cache_alloc(s, flags);
- if (!x) {
- __kmem_cache_free_bulk(s, i, p);
- return 0;
- }
- }
- return i;
-}
-
/*
* Figure out what the alignment of the objects will be given a set of
* flags, a user specified alignment and the size of the objects.
void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order)
{
void *ret = kmalloc_order(size, flags, order);
- trace_kmalloc(_RET_IP_, ret, size, PAGE_SIZE << order, flags);
+ trace_kmalloc(_RET_IP_, ret, NULL, size, PAGE_SIZE << order, flags);
return ret;
}
EXPORT_SYMBOL(kmalloc_order_trace);
*m = size;
ret = (void *)m + minalign;
- trace_kmalloc_node(caller, ret,
+ trace_kmalloc_node(caller, ret, NULL,
size, size + minalign, gfp, node);
} else {
unsigned int order = get_order(size);
gfp |= __GFP_COMP;
ret = slob_new_pages(gfp, order, node);
- trace_kmalloc_node(caller, ret,
+ trace_kmalloc_node(caller, ret, NULL,
size, PAGE_SIZE << order, gfp, node);
}
if (c->size < PAGE_SIZE) {
b = slob_alloc(c->size, flags, c->align, node, 0);
- trace_kmem_cache_alloc_node(_RET_IP_, b, c->object_size,
+ trace_kmem_cache_alloc_node(_RET_IP_, b, NULL, c->object_size,
SLOB_UNITS(c->size) * SLOB_UNIT,
flags, node);
} else {
b = slob_new_pages(flags, get_order(c->size), node);
- trace_kmem_cache_alloc_node(_RET_IP_, b, c->object_size,
+ trace_kmem_cache_alloc_node(_RET_IP_, b, NULL, c->object_size,
PAGE_SIZE << get_order(c->size),
flags, node);
}
}
EXPORT_SYMBOL(kmem_cache_free);
-void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p)
+void kmem_cache_free_bulk(struct kmem_cache *s, size_t nr, void **p)
{
- __kmem_cache_free_bulk(s, size, p);
+ size_t i;
+
+ for (i = 0; i < nr; i++) {
+ if (s)
+ kmem_cache_free(s, p[i]);
+ else
+ kfree(p[i]);
+ }
}
EXPORT_SYMBOL(kmem_cache_free_bulk);
-int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t nr,
void **p)
{
- return __kmem_cache_alloc_bulk(s, flags, size, p);
+ size_t i;
+
+ for (i = 0; i < nr; i++) {
+ void *x = p[i] = kmem_cache_alloc(s, flags);
+
+ if (!x) {
+ kmem_cache_free_bulk(s, i, p);
+ return 0;
+ }
+ }
+ return i;
}
EXPORT_SYMBOL(kmem_cache_alloc_bulk);
{
void *ret = slab_alloc(s, lru, gfpflags, _RET_IP_, s->object_size);
- trace_kmem_cache_alloc(_RET_IP_, ret, s->object_size,
+ trace_kmem_cache_alloc(_RET_IP_, ret, s, s->object_size,
s->size, gfpflags);
return ret;
void *kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size)
{
void *ret = slab_alloc(s, NULL, gfpflags, _RET_IP_, size);
- trace_kmalloc(_RET_IP_, ret, size, s->size, gfpflags);
+ trace_kmalloc(_RET_IP_, ret, s, size, s->size, gfpflags);
ret = kasan_kmalloc(s, ret, size, gfpflags);
return ret;
}
{
void *ret = slab_alloc_node(s, NULL, gfpflags, node, _RET_IP_, s->object_size);
- trace_kmem_cache_alloc_node(_RET_IP_, ret,
+ trace_kmem_cache_alloc_node(_RET_IP_, ret, s,
s->object_size, s->size, gfpflags, node);
return ret;
{
void *ret = slab_alloc_node(s, NULL, gfpflags, node, _RET_IP_, size);
- trace_kmalloc_node(_RET_IP_, ret,
+ trace_kmalloc_node(_RET_IP_, ret, s,
size, s->size, gfpflags, node);
ret = kasan_kmalloc(s, ret, size, gfpflags);
struct kmem_cache_cpu *c;
unsigned long tid;
- /* memcg_slab_free_hook() is already called for bulk free. */
- if (!tail)
- memcg_slab_free_hook(s, &head, 1);
redo:
/*
* Determine the currently cpus per cpu slab.
}
static __always_inline void slab_free(struct kmem_cache *s, struct slab *slab,
- void *head, void *tail, int cnt,
+ void *head, void *tail, void **p, int cnt,
unsigned long addr)
{
+ memcg_slab_free_hook(s, slab, p, cnt);
/*
* With KASAN enabled slab_free_freelist_hook modifies the freelist
* to remove objects, whose reuse must be delayed.
if (!s)
return;
trace_kmem_cache_free(_RET_IP_, x, s->name);
- slab_free(s, virt_to_slab(x), x, NULL, 1, _RET_IP_);
+ slab_free(s, virt_to_slab(x), x, NULL, &x, 1, _RET_IP_);
}
EXPORT_SYMBOL(kmem_cache_free);
int build_detached_freelist(struct kmem_cache *s, size_t size,
void **p, struct detached_freelist *df)
{
- size_t first_skipped_index = 0;
int lookahead = 3;
void *object;
struct folio *folio;
- struct slab *slab;
-
- /* Always re-init detached_freelist */
- df->slab = NULL;
-
- do {
- object = p[--size];
- /* Do we need !ZERO_OR_NULL_PTR(object) here? (for kfree) */
- } while (!object && size);
-
- if (!object)
- return 0;
+ size_t same;
+ object = p[--size];
folio = virt_to_folio(object);
if (!s) {
/* Handle kalloc'ed objects */
if (unlikely(!folio_test_slab(folio))) {
free_large_kmalloc(folio, object);
- p[size] = NULL; /* mark object processed */
+ df->slab = NULL;
return size;
}
/* Derive kmem_cache from object */
- slab = folio_slab(folio);
- df->s = slab->slab_cache;
+ df->slab = folio_slab(folio);
+ df->s = df->slab->slab_cache;
} else {
- slab = folio_slab(folio);
+ df->slab = folio_slab(folio);
df->s = cache_from_obj(s, object); /* Support for memcg */
}
- if (is_kfence_address(object)) {
- slab_free_hook(df->s, object, false);
- __kfence_free(object);
- p[size] = NULL; /* mark object processed */
- return size;
- }
-
/* Start new detached freelist */
- df->slab = slab;
- set_freepointer(df->s, object, NULL);
df->tail = object;
df->freelist = object;
- p[size] = NULL; /* mark object processed */
df->cnt = 1;
+ if (is_kfence_address(object))
+ return size;
+
+ set_freepointer(df->s, object, NULL);
+
+ same = size;
while (size) {
object = p[--size];
- if (!object)
- continue; /* Skip processed objects */
-
/* df->slab is always set at this point */
if (df->slab == virt_to_slab(object)) {
/* Opportunity build freelist */
set_freepointer(df->s, object, df->freelist);
df->freelist = object;
df->cnt++;
- p[size] = NULL; /* mark object processed */
-
+ same--;
+ if (size != same)
+ swap(p[size], p[same]);
continue;
}
/* Limit look ahead search */
if (!--lookahead)
break;
-
- if (!first_skipped_index)
- first_skipped_index = size + 1;
}
- return first_skipped_index;
+ return same;
}
/* Note that interrupts must be enabled when calling this function. */
void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p)
{
- if (WARN_ON(!size))
+ if (!size)
return;
- memcg_slab_free_hook(s, p, size);
do {
struct detached_freelist df;
if (!df.slab)
continue;
- slab_free(df.s, df.slab, df.freelist, df.tail, df.cnt, _RET_IP_);
+ slab_free(df.s, df.slab, df.freelist, df.tail, &p[size], df.cnt,
+ _RET_IP_);
} while (likely(size));
}
EXPORT_SYMBOL(kmem_cache_free_bulk);
error:
slub_put_cpu_ptr(s->cpu_slab);
slab_post_alloc_hook(s, objcg, flags, i, p, false);
- __kmem_cache_free_bulk(s, i, p);
+ kmem_cache_free_bulk(s, i, p);
return 0;
}
EXPORT_SYMBOL(kmem_cache_alloc_bulk);
ret = slab_alloc(s, NULL, flags, _RET_IP_, size);
- trace_kmalloc(_RET_IP_, ret, size, s->size, flags);
+ trace_kmalloc(_RET_IP_, ret, s, size, s->size, flags);
ret = kasan_kmalloc(s, ret, size, flags);
if (unlikely(size > KMALLOC_MAX_CACHE_SIZE)) {
ret = kmalloc_large_node(size, flags, node);
- trace_kmalloc_node(_RET_IP_, ret,
+ trace_kmalloc_node(_RET_IP_, ret, NULL,
size, PAGE_SIZE << get_order(size),
flags, node);
ret = slab_alloc_node(s, NULL, flags, node, _RET_IP_, size);
- trace_kmalloc_node(_RET_IP_, ret, size, s->size, flags, node);
+ trace_kmalloc_node(_RET_IP_, ret, s, size, s->size, flags, node);
ret = kasan_kmalloc(s, ret, size, flags);
return;
}
slab = folio_slab(folio);
- slab_free(slab->slab_cache, slab, object, NULL, 1, _RET_IP_);
+ slab_free(slab->slab_cache, slab, object, NULL, &object, 1, _RET_IP_);
}
EXPORT_SYMBOL(kfree);
s = find_mergeable(size, align, flags, name, ctor);
if (s) {
+ if (sysfs_slab_alias(s, name))
+ return NULL;
+
s->refcount++;
/*
*/
s->object_size = max(s->object_size, size);
s->inuse = max(s->inuse, ALIGN(size, sizeof(void *)));
-
- if (sysfs_slab_alias(s, name)) {
- s->refcount--;
- s = NULL;
- }
}
return s;
ret = slab_alloc(s, NULL, gfpflags, caller, size);
/* Honor the call site pointer we received. */
- trace_kmalloc(caller, ret, size, s->size, gfpflags);
+ trace_kmalloc(caller, ret, s, size, s->size, gfpflags);
return ret;
}
if (unlikely(size > KMALLOC_MAX_CACHE_SIZE)) {
ret = kmalloc_large_node(size, gfpflags, node);
- trace_kmalloc_node(caller, ret,
+ trace_kmalloc_node(caller, ret, NULL,
size, PAGE_SIZE << get_order(size),
gfpflags, node);
ret = slab_alloc_node(s, NULL, gfpflags, node, caller, size);
/* Honor the call site pointer we received. */
- trace_kmalloc_node(caller, ret, size, s->size, gfpflags, node);
+ trace_kmalloc_node(caller, ret, s, size, s->size, gfpflags, node);
return ret;
}
entry.val = 0;
if (folio_test_large(folio)) {
- if (IS_ENABLED(CONFIG_THP_SWAP))
+ if (IS_ENABLED(CONFIG_THP_SWAP) && arch_thp_swp_supported())
get_swap_pages(1, &entry, folio_nr_pages(folio));
goto out;
}
return err;
}
+ /* Update event mask so only the allowed event can wakeup the host */
+ hci_set_event_mask_sync(hdev);
+
/* Only configure accept list if disconnect succeeded and wake
* isn't being prevented.
*/
/* Unpause to take care of updating scanning params */
hdev->scanning_paused = false;
- /* Update event mask so only the allowed event can wakeup the host */
- hci_set_event_mask_sync(hdev);
-
/* Enable event filter for paired devices */
hci_update_event_filter_sync(hdev);
}
/* Find channel with given SCID.
- * Returns locked channel. */
+ * Returns a reference locked channel.
+ */
static struct l2cap_chan *l2cap_get_chan_by_scid(struct l2cap_conn *conn,
u16 cid)
{
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_scid(conn, cid);
- if (c)
- l2cap_chan_lock(c);
+ if (c) {
+ /* Only lock if chan reference is not 0 */
+ c = l2cap_chan_hold_unless_zero(c);
+ if (c)
+ l2cap_chan_lock(c);
+ }
mutex_unlock(&conn->chan_lock);
return c;
}
/* Find channel with given DCID.
- * Returns locked channel.
+ * Returns a reference locked channel.
*/
static struct l2cap_chan *l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
u16 cid)
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_dcid(conn, cid);
- if (c)
- l2cap_chan_lock(c);
+ if (c) {
+ /* Only lock if chan reference is not 0 */
+ c = l2cap_chan_hold_unless_zero(c);
+ if (c)
+ l2cap_chan_lock(c);
+ }
mutex_unlock(&conn->chan_lock);
return c;
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_ident(conn, ident);
- if (c)
- l2cap_chan_lock(c);
+ if (c) {
+ /* Only lock if chan reference is not 0 */
+ c = l2cap_chan_hold_unless_zero(c);
+ if (c)
+ l2cap_chan_lock(c);
+ }
mutex_unlock(&conn->chan_lock);
return c;
kref_get(&c->kref);
}
+struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c)
+{
+ BT_DBG("chan %p orig refcnt %u", c, kref_read(&c->kref));
+
+ if (!kref_get_unless_zero(&c->kref))
+ return NULL;
+
+ return c;
+}
+
void l2cap_chan_put(struct l2cap_chan *c)
{
BT_DBG("chan %p orig refcnt %u", c, kref_read(&c->kref));
src_match = !bacmp(&c->src, src);
dst_match = !bacmp(&c->dst, dst);
if (src_match && dst_match) {
- l2cap_chan_hold(c);
+ c = l2cap_chan_hold_unless_zero(c);
+ if (!c)
+ continue;
+
read_unlock(&chan_list_lock);
return c;
}
}
if (c1)
- l2cap_chan_hold(c1);
+ c1 = l2cap_chan_hold_unless_zero(c1);
read_unlock(&chan_list_lock);
unlock:
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return err;
}
done:
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return err;
}
l2cap_send_move_chan_rsp(chan, result);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return 0;
}
}
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
}
static void l2cap_move_fail(struct l2cap_conn *conn, u8 ident, u16 icid,
l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
}
static int l2cap_move_channel_rsp(struct l2cap_conn *conn,
l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return 0;
}
}
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return 0;
}
if (credits > max_credits) {
BT_ERR("LE credits overflow");
l2cap_send_disconn_req(chan, ECONNRESET);
- l2cap_chan_unlock(chan);
/* Return 0 so that we don't trigger an unnecessary
* command reject packet.
*/
- return 0;
+ goto unlock;
}
chan->tx_credits += credits;
if (chan->tx_credits)
chan->ops->resume(chan);
+unlock:
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return 0;
}
done:
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
}
static void l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm,
if (src_type != c->src_type)
continue;
- l2cap_chan_hold(c);
+ c = l2cap_chan_hold_unless_zero(c);
read_unlock(&chan_list_lock);
return c;
}
else
status = MGMT_STATUS_FAILED;
- mgmt_pending_remove(cmd);
goto unlock;
}
}
done:
+ if (af) {
+ if (nlmsg_get_pos(skb) - (void *)af > nla_attr_size(0))
+ nla_nest_end(skb, af);
+ else
+ nla_nest_cancel(skb, af);
+ }
- if (af)
- nla_nest_end(skb, af);
nlmsg_end(skb, nlh);
return 0;
struct caifsock {
struct sock sk; /* must be first member */
struct cflayer layer;
- u32 flow_state;
+ unsigned long flow_state;
struct caif_connect_request conn_req;
struct mutex readlock;
struct dentry *debugfs_socket_dir;
static int rx_flow_is_on(struct caifsock *cf_sk)
{
- return test_bit(RX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ return test_bit(RX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static int tx_flow_is_on(struct caifsock *cf_sk)
{
- return test_bit(TX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ return test_bit(TX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static void set_rx_flow_off(struct caifsock *cf_sk)
{
- clear_bit(RX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ clear_bit(RX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static void set_rx_flow_on(struct caifsock *cf_sk)
{
- set_bit(RX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ set_bit(RX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static void set_tx_flow_off(struct caifsock *cf_sk)
{
- clear_bit(TX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ clear_bit(TX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static void set_tx_flow_on(struct caifsock *cf_sk)
{
- set_bit(TX_FLOW_ON_BIT,
- (void *) &cf_sk->flow_state);
+ set_bit(TX_FLOW_ON_BIT, &cf_sk->flow_state);
}
static void caif_read_lock(struct sock *sk)
sk->sk_family = PF_DECnet;
sk->sk_protocol = 0;
sk->sk_allocation = gfp;
- sk->sk_sndbuf = sysctl_decnet_wmem[1];
- sk->sk_rcvbuf = sysctl_decnet_rmem[1];
+ sk->sk_sndbuf = READ_ONCE(sysctl_decnet_wmem[1]);
+ sk->sk_rcvbuf = READ_ONCE(sysctl_decnet_rmem[1]);
/* Initialization of DECnet Session Control Port */
scp = DN_SK(sk);
ether_addr_copy(a->addr, addr);
a->vid = vid;
+ a->db = db;
refcount_set(&a->refcount, 1);
list_add_tail(&a->list, &lag->fdbs);
void fib_alias_hw_flags_set(struct net *net, const struct fib_rt_info *fri)
{
+ u8 fib_notify_on_flag_change;
struct fib_alias *fa_match;
struct sk_buff *skb;
int err;
WRITE_ONCE(fa_match->offload, fri->offload);
WRITE_ONCE(fa_match->trap, fri->trap);
+ fib_notify_on_flag_change = READ_ONCE(net->ipv4.sysctl_fib_notify_on_flag_change);
+
/* 2 means send notifications only if offload_failed was changed. */
- if (net->ipv4.sysctl_fib_notify_on_flag_change == 2 &&
+ if (fib_notify_on_flag_change == 2 &&
READ_ONCE(fa_match->offload_failed) == fri->offload_failed)
goto out;
WRITE_ONCE(fa_match->offload_failed, fri->offload_failed);
- if (!net->ipv4.sysctl_fib_notify_on_flag_change)
+ if (!fib_notify_on_flag_change)
goto out;
skb = nlmsg_new(fib_nlmsg_size(fa_match->fa_info), GFP_ATOMIC);
icsk->icsk_sync_mss = tcp_sync_mss;
- WRITE_ONCE(sk->sk_sndbuf, sock_net(sk)->ipv4.sysctl_tcp_wmem[1]);
- WRITE_ONCE(sk->sk_rcvbuf, sock_net(sk)->ipv4.sysctl_tcp_rmem[1]);
+ WRITE_ONCE(sk->sk_sndbuf, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_wmem[1]));
+ WRITE_ONCE(sk->sk_rcvbuf, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[1]));
sk_sockets_allocated_inc(sk);
}
int size_goal)
{
return skb->len < size_goal &&
- sock_net(sk)->ipv4.sysctl_tcp_autocorking &&
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_autocorking) &&
!tcp_rtx_queue_empty(sk) &&
refcount_read(&sk->sk_wmem_alloc) > skb->truesize &&
tcp_skb_can_collapse_to(skb);
if (sk->sk_userlocks & SOCK_RCVBUF_LOCK)
cap = sk->sk_rcvbuf >> 1;
else
- cap = sock_net(sk)->ipv4.sysctl_tcp_rmem[2] >> 1;
+ cap = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]) >> 1;
val = min(val, cap);
WRITE_ONCE(sk->sk_rcvlowat, val ? : 1);
return SKB_DROP_REASON_TCP_MD5UNEXPECTED;
}
- /* check the signature */
- genhash = tp->af_specific->calc_md5_hash(newhash, hash_expected,
- NULL, skb);
+ /* Check the signature.
+ * To support dual stack listeners, we need to handle
+ * IPv4-mapped case.
+ */
+ if (family == AF_INET)
+ genhash = tcp_v4_md5_hash_skb(newhash,
+ hash_expected,
+ NULL, skb);
+ else
+ genhash = tp->af_specific->calc_md5_hash(newhash,
+ hash_expected,
+ NULL, skb);
if (genhash || memcmp(hash_location, newhash, 16) != 0) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPMD5FAILURE);
if (sk->sk_sndbuf < sndmem)
WRITE_ONCE(sk->sk_sndbuf,
- min(sndmem, sock_net(sk)->ipv4.sysctl_tcp_wmem[2]));
+ min(sndmem, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_wmem[2])));
}
/* 2. Tuning advertised window (window_clamp, rcv_ssthresh)
struct tcp_sock *tp = tcp_sk(sk);
/* Optimize this! */
int truesize = tcp_win_from_space(sk, skbtruesize) >> 1;
- int window = tcp_win_from_space(sk, sock_net(sk)->ipv4.sysctl_tcp_rmem[2]) >> 1;
+ int window = tcp_win_from_space(sk, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2])) >> 1;
while (tp->rcv_ssthresh <= window) {
if (truesize <= skb->len)
*/
static void tcp_init_buffer_space(struct sock *sk)
{
- int tcp_app_win = sock_net(sk)->ipv4.sysctl_tcp_app_win;
+ int tcp_app_win = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_app_win);
struct tcp_sock *tp = tcp_sk(sk);
int maxwin;
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
struct net *net = sock_net(sk);
+ int rmem2;
icsk->icsk_ack.quick = 0;
+ rmem2 = READ_ONCE(net->ipv4.sysctl_tcp_rmem[2]);
- if (sk->sk_rcvbuf < net->ipv4.sysctl_tcp_rmem[2] &&
+ if (sk->sk_rcvbuf < rmem2 &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
!tcp_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sk_prot_mem_limits(sk, 0)) {
WRITE_ONCE(sk->sk_rcvbuf,
- min(atomic_read(&sk->sk_rmem_alloc),
- net->ipv4.sysctl_tcp_rmem[2]));
+ min(atomic_read(&sk->sk_rmem_alloc), rmem2));
}
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
tp->rcv_ssthresh = min(tp->window_clamp, 2U * tp->advmss);
* <prev RTT . ><current RTT .. ><next RTT .... >
*/
- if (sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf &&
+ if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf) &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int rcvmem, rcvbuf;
u64 rcvwin, grow;
do_div(rcvwin, tp->advmss);
rcvbuf = min_t(u64, rcvwin * rcvmem,
- sock_net(sk)->ipv4.sysctl_tcp_rmem[2]);
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]));
if (rcvbuf > sk->sk_rcvbuf) {
WRITE_ONCE(sk->sk_rcvbuf, rcvbuf);
* end of slow start and should slow down.
*/
if (tcp_snd_cwnd(tp) < tp->snd_ssthresh / 2)
- rate *= sock_net(sk)->ipv4.sysctl_tcp_pacing_ss_ratio;
+ rate *= READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_pacing_ss_ratio);
else
- rate *= sock_net(sk)->ipv4.sysctl_tcp_pacing_ca_ratio;
+ rate *= READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_pacing_ca_ratio);
rate *= max(tcp_snd_cwnd(tp), tp->packets_out);
* loss recovery is underway except recurring timeout(s) on
* the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
*/
- tp->frto = net->ipv4.sysctl_tcp_frto &&
+ tp->frto = READ_ONCE(net->ipv4.sysctl_tcp_frto) &&
(new_recovery || icsk->icsk_retransmits) &&
!inet_csk(sk)->icsk_mtup.probe_size;
}
static void tcp_update_rtt_min(struct sock *sk, u32 rtt_us, const int flag)
{
- u32 wlen = sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen * HZ;
+ u32 wlen = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen) * HZ;
struct tcp_sock *tp = tcp_sk(sk);
if ((flag & FLAG_ACK_MAYBE_DELAYED) && rtt_us > tcp_min_rtt(tp)) {
if (*last_oow_ack_time) {
s32 elapsed = (s32)(tcp_jiffies32 - *last_oow_ack_time);
- if (0 <= elapsed && elapsed < net->ipv4.sysctl_tcp_invalid_ratelimit) {
+ if (0 <= elapsed &&
+ elapsed < READ_ONCE(net->ipv4.sysctl_tcp_invalid_ratelimit)) {
NET_INC_STATS(net, mib_idx);
return true; /* rate-limited: don't send yet! */
}
/* Then check host-wide RFC 5961 rate limit. */
now = jiffies / HZ;
if (now != challenge_timestamp) {
- u32 ack_limit = net->ipv4.sysctl_tcp_challenge_ack_limit;
+ u32 ack_limit = READ_ONCE(net->ipv4.sysctl_tcp_challenge_ack_limit);
u32 half = (ack_limit + 1) >> 1;
challenge_timestamp = now;
{
struct tcp_sock *tp = tcp_sk(sk);
- if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+ if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
int mib_idx;
if (before(seq, tp->rcv_nxt))
NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
tcp_enter_quickack_mode(sk, TCP_MAX_QUICKACKS);
- if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+ if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
u32 end_seq = TCP_SKB_CB(skb)->end_seq;
tcp_rcv_spurious_retrans(sk, skb);
}
if (!tcp_is_sack(tp) ||
- tp->compressed_ack >= sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr)
+ tp->compressed_ack >= READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr))
goto send_now;
if (tp->compressed_ack_rcv_nxt != tp->rcv_nxt) {
if (tp->srtt_us && tp->srtt_us < rtt)
rtt = tp->srtt_us;
- delay = min_t(unsigned long, sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns,
+ delay = min_t(unsigned long,
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns),
rtt * (NSEC_PER_USEC >> 3)/20);
sock_hold(sk);
hrtimer_start_range_ns(&tp->compressed_ack_timer, ns_to_ktime(delay),
- sock_net(sk)->ipv4.sysctl_tcp_comp_sack_slack_ns,
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_slack_ns),
HRTIMER_MODE_REL_PINNED_SOFT);
}
if (skb) {
__tcp_v4_send_check(skb, ireq->ir_loc_addr, ireq->ir_rmt_addr);
- tos = sock_net(sk)->ipv4.sysctl_tcp_reflect_tos ?
+ tos = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos) ?
(tcp_rsk(req)->syn_tos & ~INET_ECN_MASK) |
(inet_sk(sk)->tos & INET_ECN_MASK) :
inet_sk(sk)->tos;
/* Set ToS of the new socket based upon the value of incoming SYN.
* ECT bits are set later in tcp_init_transfer().
*/
- if (sock_net(sk)->ipv4.sysctl_tcp_reflect_tos)
+ if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos))
newinet->tos = tcp_rsk(req)->syn_tos & ~INET_ECN_MASK;
if (!dst) {
int m;
sk_dst_confirm(sk);
- if (net->ipv4.sysctl_tcp_nometrics_save || !dst)
+ if (READ_ONCE(net->ipv4.sysctl_tcp_nometrics_save) || !dst)
return;
rcu_read_lock();
if (tcp_in_initial_slowstart(tp)) {
/* Slow start still did not finish. */
- if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+ if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
!tcp_metric_locked(tm, TCP_METRIC_SSTHRESH)) {
val = tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
if (val && (tcp_snd_cwnd(tp) >> 1) > val)
} else if (!tcp_in_slow_start(tp) &&
icsk->icsk_ca_state == TCP_CA_Open) {
/* Cong. avoidance phase, cwnd is reliable. */
- if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+ if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
!tcp_metric_locked(tm, TCP_METRIC_SSTHRESH))
tcp_metric_set(tm, TCP_METRIC_SSTHRESH,
max(tcp_snd_cwnd(tp) >> 1, tp->snd_ssthresh));
tcp_metric_set(tm, TCP_METRIC_CWND,
(val + tp->snd_ssthresh) >> 1);
}
- if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+ if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
!tcp_metric_locked(tm, TCP_METRIC_SSTHRESH)) {
val = tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
if (val && tp->snd_ssthresh > val)
if (tcp_metric_locked(tm, TCP_METRIC_CWND))
tp->snd_cwnd_clamp = tcp_metric_get(tm, TCP_METRIC_CWND);
- val = net->ipv4.sysctl_tcp_no_ssthresh_metrics_save ?
+ val = READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) ?
0 : tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
if (val) {
tp->snd_ssthresh = val;
if (tcp_packets_in_flight(tp) == 0)
tcp_ca_event(sk, CA_EVENT_TX_START);
- /* If this is the first data packet sent in response to the
- * previous received data,
- * and it is a reply for ato after last received packet,
- * increase pingpong count.
- */
- if (before(tp->lsndtime, icsk->icsk_ack.lrcvtime) &&
- (u32)(now - icsk->icsk_ack.lrcvtime) < icsk->icsk_ack.ato)
- inet_csk_inc_pingpong_cnt(sk);
-
tp->lsndtime = now;
+
+ /* If it is a reply for ato after last received
+ * packet, enter pingpong mode.
+ */
+ if ((u32)(now - icsk->icsk_ack.lrcvtime) < icsk->icsk_ack.ato)
+ inet_csk_enter_pingpong_mode(sk);
}
/* Account for an ACK we sent. */
* which we interpret as a sign the remote TCP is not
* misinterpreting the window field as a signed quantity.
*/
- if (sock_net(sk)->ipv4.sysctl_tcp_workaround_signed_windows)
+ if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_workaround_signed_windows))
(*rcv_wnd) = min(space, MAX_TCP_WINDOW);
else
(*rcv_wnd) = min_t(u32, space, U16_MAX);
*rcv_wscale = 0;
if (wscale_ok) {
/* Set window scaling on max possible window */
- space = max_t(u32, space, sock_net(sk)->ipv4.sysctl_tcp_rmem[2]);
+ space = max_t(u32, space, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]));
space = max_t(u32, space, sysctl_rmem_max);
space = min_t(u32, space, *window_clamp);
*rcv_wscale = clamp_t(int, ilog2(space) - 15,
* scaled window.
*/
if (!tp->rx_opt.rcv_wscale &&
- sock_net(sk)->ipv4.sysctl_tcp_workaround_signed_windows)
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_workaround_signed_windows))
new_win = min(new_win, MAX_TCP_WINDOW);
else
new_win = min(new_win, (65535U << tp->rx_opt.rcv_wscale));
bytes = sk->sk_pacing_rate >> READ_ONCE(sk->sk_pacing_shift);
- r = tcp_min_rtt(tcp_sk(sk)) >> sock_net(sk)->ipv4.sysctl_tcp_tso_rtt_log;
+ r = tcp_min_rtt(tcp_sk(sk)) >> READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_tso_rtt_log);
if (r < BITS_PER_TYPE(sk->sk_gso_max_size))
bytes += sk->sk_gso_max_size >> r;
min_tso = ca_ops->min_tso_segs ?
ca_ops->min_tso_segs(sk) :
- sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs;
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs);
tso_segs = tcp_tso_autosize(sk, mss_now, min_tso);
return min_t(u32, tso_segs, sk->sk_gso_max_segs);
sk->sk_pacing_rate >> READ_ONCE(sk->sk_pacing_shift));
if (sk->sk_pacing_status == SK_PACING_NONE)
limit = min_t(unsigned long, limit,
- sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes);
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes));
limit <<= factor;
if (static_branch_unlikely(&tcp_tx_delay_enabled) &&
if (++cnt >= MLD_MAX_QUEUE) {
rework = true;
- schedule_delayed_work(&idev->mc_query_work, 0);
break;
}
}
__mld_query_work(skb);
mutex_unlock(&idev->mc_lock);
- if (!rework)
- in6_dev_put(idev);
+ if (rework && queue_delayed_work(mld_wq, &idev->mc_query_work, 0))
+ return;
+
+ in6_dev_put(idev);
}
/* called with rcu_read_lock() */
if (++cnt >= MLD_MAX_QUEUE) {
rework = true;
- schedule_delayed_work(&idev->mc_report_work, 0);
break;
}
}
__mld_report_work(skb);
mutex_unlock(&idev->mc_lock);
- if (!rework)
- in6_dev_put(idev);
+ if (rework && queue_delayed_work(mld_wq, &idev->mc_report_work, 0))
+ return;
+
+ in6_dev_put(idev);
}
static bool is_in(struct ifmcaddr6 *pmc, struct ip6_sf_list *psf, int type,
#include <linux/proc_fs.h>
#include <net/ping.h>
+static void ping_v6_destroy(struct sock *sk)
+{
+ inet6_destroy_sock(sk);
+}
+
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
int *addr_len)
.owner = THIS_MODULE,
.init = ping_init_sock,
.close = ping_close,
+ .destroy = ping_v6_destroy,
.connect = ip6_datagram_connect_v6_only,
.disconnect = __udp_disconnect,
.setsockopt = ipv6_setsockopt,
if (np->repflow && ireq->pktopts)
fl6->flowlabel = ip6_flowlabel(ipv6_hdr(ireq->pktopts));
- tclass = sock_net(sk)->ipv4.sysctl_tcp_reflect_tos ?
+ tclass = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos) ?
(tcp_rsk(req)->syn_tos & ~INET_ECN_MASK) |
(np->tclass & INET_ECN_MASK) :
np->tclass;
/* Set ToS of the new socket based upon the value of incoming SYN.
* ECT bits are set later in tcp_init_transfer().
*/
- if (sock_net(sk)->ipv4.sysctl_tcp_reflect_tos)
+ if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos))
newnp->tclass = tcp_rsk(req)->syn_tos & ~INET_ECN_MASK;
/* Clone native IPv6 options from listening socket (if any)
bool cancel_scan;
struct cfg80211_nan_func *func;
- spin_lock_bh(&local->fq.lock);
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
- spin_unlock_bh(&local->fq.lock);
+ synchronize_rcu(); /* flush _ieee80211_wake_txqs() */
cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata;
if (cancel_scan)
if (unlikely(th->syn))
new_win = min(new_win, 65535U) << tp->rx_opt.rcv_wscale;
if (!tp->rx_opt.rcv_wscale &&
- sock_net(ssk)->ipv4.sysctl_tcp_workaround_signed_windows)
+ READ_ONCE(sock_net(ssk)->ipv4.sysctl_tcp_workaround_signed_windows))
new_win = min(new_win, MAX_TCP_WINDOW);
else
new_win = min(new_win, (65535U << tp->rx_opt.rcv_wscale));
if (msk->rcvq_space.copied <= msk->rcvq_space.space)
goto new_measure;
- if (sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf &&
+ if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf) &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int rcvmem, rcvbuf;
u64 rcvwin, grow;
do_div(rcvwin, advmss);
rcvbuf = min_t(u64, rcvwin * rcvmem,
- sock_net(sk)->ipv4.sysctl_tcp_rmem[2]);
+ READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]));
if (rcvbuf > sk->sk_rcvbuf) {
u32 window_clamp;
mptcp_ca_reset(sk);
sk_sockets_allocated_inc(sk);
- sk->sk_rcvbuf = sock_net(sk)->ipv4.sysctl_tcp_rmem[1];
- sk->sk_sndbuf = sock_net(sk)->ipv4.sysctl_tcp_wmem[1];
+ sk->sk_rcvbuf = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[1]);
+ sk->sk_sndbuf = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_wmem[1]);
return 0;
}
mptcp_sock_graft(ssk, sk->sk_socket);
iput(SOCK_INODE(sf));
WRITE_ONCE(msk->allow_infinite_fallback, false);
- return err;
+ return 0;
failed_unlink:
list_del(&subflow->node);
if (err < 0)
return err;
}
+
+ cond_resched();
}
return 0;
break;
}
}
+
+ cond_resched();
}
list_for_each_entry(set, &ctx->table->sets, list) {
+ cond_resched();
+
if (!nft_is_active_next(ctx->net, set))
continue;
if (!(set->flags & NFT_SET_MAP) ||
}
static int
-nfqnl_mangle(void *data, int data_len, struct nf_queue_entry *e, int diff)
+nfqnl_mangle(void *data, unsigned int data_len, struct nf_queue_entry *e, int diff)
{
struct sk_buff *nskb;
if (diff < 0) {
+ unsigned int min_len = skb_transport_offset(e->skb);
+
+ if (data_len < min_len)
+ return -EINVAL;
+
if (pskb_trim(e->skb, data_len))
return -ENOMEM;
} else if (diff > 0) {
regs->verdict.code = ret;
}
+static int nft_queue_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ static const unsigned int supported_hooks = ((1 << NF_INET_PRE_ROUTING) |
+ (1 << NF_INET_LOCAL_IN) |
+ (1 << NF_INET_FORWARD) |
+ (1 << NF_INET_LOCAL_OUT) |
+ (1 << NF_INET_POST_ROUTING));
+
+ switch (ctx->family) {
+ case NFPROTO_IPV4:
+ case NFPROTO_IPV6:
+ case NFPROTO_INET:
+ case NFPROTO_BRIDGE:
+ break;
+ case NFPROTO_NETDEV: /* lacks okfn */
+ fallthrough;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return nft_chain_validate_hooks(ctx->chain, supported_hooks);
+}
+
static const struct nla_policy nft_queue_policy[NFTA_QUEUE_MAX + 1] = {
[NFTA_QUEUE_NUM] = { .type = NLA_U16 },
[NFTA_QUEUE_TOTAL] = { .type = NLA_U16 },
.eval = nft_queue_eval,
.init = nft_queue_init,
.dump = nft_queue_dump,
+ .validate = nft_queue_validate,
.reduce = NFT_REDUCE_READONLY,
};
.eval = nft_queue_sreg_eval,
.init = nft_queue_sreg_init,
.dump = nft_queue_sreg_dump,
+ .validate = nft_queue_validate,
.reduce = NFT_REDUCE_READONLY,
};
if (!sctp_ulpq_init(&asoc->ulpq, asoc))
goto fail_init;
- if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams,
- 0, gfp))
- goto fail_init;
+ if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams, 0, gfp))
+ goto stream_free;
/* Initialize default path MTU. */
asoc->pathmtu = sp->pathmtu;
ret = sctp_stream_alloc_out(stream, outcnt, gfp);
if (ret)
- goto out_err;
+ return ret;
for (i = 0; i < stream->outcnt; i++)
SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN;
handle_in:
sctp_stream_interleave_init(stream);
if (!incnt)
- goto out;
-
- ret = sctp_stream_alloc_in(stream, incnt, gfp);
- if (ret)
- goto in_err;
-
- goto out;
+ return 0;
-in_err:
- sched->free(stream);
- genradix_free(&stream->in);
-out_err:
- genradix_free(&stream->out);
- stream->outcnt = 0;
-out:
- return ret;
+ return sctp_stream_alloc_in(stream, incnt, gfp);
}
int sctp_stream_init_ext(struct sctp_stream *stream, __u16 sid)
if (!SCTP_SO(&asoc->stream, i)->ext)
continue;
- ret = n->init_sid(&asoc->stream, i, GFP_KERNEL);
+ ret = n->init_sid(&asoc->stream, i, GFP_ATOMIC);
if (ret)
goto err;
}
timer_setup(&sk->sk_timer, tipc_sk_timeout, 0);
sk->sk_shutdown = 0;
sk->sk_backlog_rcv = tipc_sk_backlog_rcv;
- sk->sk_rcvbuf = sysctl_tipc_rmem[1];
+ sk->sk_rcvbuf = READ_ONCE(sysctl_tipc_rmem[1]);
sk->sk_data_ready = tipc_data_ready;
sk->sk_write_space = tipc_write_space;
sk->sk_destruct = tipc_sock_destruct;
* by tls_device_free_ctx. rx_conf and tx_conf stay in TLS_HW.
* Now release the ref taken above.
*/
- if (refcount_dec_and_test(&ctx->refcount))
+ if (refcount_dec_and_test(&ctx->refcount)) {
+ /* sk_destruct ran after tls_device_down took a ref, and
+ * it returned early. Complete the destruction here.
+ */
+ list_del(&ctx->list);
tls_device_free_ctx(ctx);
+ }
}
up_write(&device_offload_lock);
fi
rm -f scripts/extract-cert
+
+rm -f arch/x86/purgatory/kexec-purgatory.c
evm_update_evmxattr(dentry, xattr_name, NULL, 0);
}
-static int evm_attr_change(struct dentry *dentry, struct iattr *attr)
+static int evm_attr_change(struct user_namespace *mnt_userns,
+ struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = d_backing_inode(dentry);
unsigned int ia_valid = attr->ia_valid;
- if ((!(ia_valid & ATTR_UID) || uid_eq(attr->ia_uid, inode->i_uid)) &&
- (!(ia_valid & ATTR_GID) || gid_eq(attr->ia_gid, inode->i_gid)) &&
+ if (!i_uid_needs_update(mnt_userns, attr, inode) &&
+ !i_gid_needs_update(mnt_userns, attr, inode) &&
(!(ia_valid & ATTR_MODE) || attr->ia_mode == inode->i_mode))
return 0;
* Permit update of file attributes when files have a valid EVM signature,
* except in the case of them having an immutable portable signature.
*/
-int evm_inode_setattr(struct dentry *dentry, struct iattr *attr)
+int evm_inode_setattr(struct user_namespace *mnt_userns, struct dentry *dentry,
+ struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
enum integrity_status evm_status;
return 0;
if (evm_status == INTEGRITY_PASS_IMMUTABLE &&
- !evm_attr_change(dentry, attr))
+ !evm_attr_change(mnt_userns, dentry, attr))
return 0;
integrity_audit_msg(AUDIT_INTEGRITY_METADATA, d_backing_inode(dentry),
/*
* Restore the measurement list from the previous kernel.
*/
-void ima_load_kexec_buffer(void)
+void __init ima_load_kexec_buffer(void)
{
void *kexec_buffer = NULL;
size_t kexec_buffer_size = 0;
return call_int_hook(inode_permission, 0, inode, mask);
}
-int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
+int security_inode_setattr(struct user_namespace *mnt_userns,
+ struct dentry *dentry, struct iattr *attr)
{
int ret;
ret = call_int_hook(inode_setattr, 0, dentry, attr);
if (ret)
return ret;
- return evm_inode_setattr(dentry, attr);
+ return evm_inode_setattr(mnt_userns, dentry, attr);
}
EXPORT_SYMBOL_GPL(security_inode_setattr);
#define X86_FEATURE_RETPOLINE_LFENCE (11*32+13) /* "" Use LFENCE for Spectre variant 2 */
#define X86_FEATURE_RETHUNK (11*32+14) /* "" Use REturn THUNK */
#define X86_FEATURE_UNRET (11*32+15) /* "" AMD BTB untrain return */
+#define X86_FEATURE_USE_IBPB_FW (11*32+16) /* "" Use IBPB during runtime firmware calls */
/* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
#define X86_FEATURE_AVX_VNNI (12*32+ 4) /* AVX VNNI instructions */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _ASM_GENERIC_FCNTL_H
#define _ASM_GENERIC_FCNTL_H
/* a horrid kludge trying to make sure that this will fail on old kernels */
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
-#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
+#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
#ifndef O_NDELAY
#define O_NDELAY O_NONBLOCK
#define F_GETSIG 11 /* for sockets. */
#endif
+#if __BITS_PER_LONG == 32 || defined(__KERNEL__)
#ifndef F_GETLK64
#define F_GETLK64 12 /* using 'struct flock64' */
#define F_SETLK64 13
#define F_SETLKW64 14
#endif
+#endif /* __BITS_PER_LONG == 32 || defined(__KERNEL__) */
#ifndef F_SETOWN_EX
#define F_SETOWN_EX 15
blocking */
#define LOCK_UN 8 /* remove lock */
+/*
+ * LOCK_MAND support has been removed from the kernel. We leave the symbols
+ * here to not break legacy builds, but these should not be used in new code.
+ */
#define LOCK_MAND 32 /* This is a mandatory flock ... */
#define LOCK_READ 64 /* which allows concurrent read operations */
#define LOCK_WRITE 128 /* which allows concurrent write operations */
#define F_LINUX_SPECIFIC_BASE 1024
+#ifndef HAVE_ARCH_STRUCT_FLOCK
struct flock {
short l_type;
short l_whence;
__ARCH_FLOCK64_PAD
#endif
};
+#endif /* HAVE_ARCH_STRUCT_FLOCK */
#endif /* _ASM_GENERIC_FCNTL_H */
def get_offset(perf_dict, field):
if field in perf_dict:
- return f"+0x{perf_dict[field]:x}"
+ return "+%#x" % perf_dict[field]
return ""
def get_dso_file_path(dso_name, dso_build_id):
else:
append = "/elf"
- dso_path = f"{os.environ['PERF_BUILDID_DIR']}/{dso_name}/{dso_build_id}{append}"
+ dso_path = os.environ['PERF_BUILDID_DIR'] + "/" + dso_name + "/" + dso_build_id + append;
# Replace duplicate slash chars to single slash char
dso_path = dso_path.replace('//', '/', 1)
return dso_path
start_addr = start_addr - dso_start;
stop_addr = stop_addr - dso_start;
disasm = [ options.objdump_name, "-d", "-z",
- f"--start-address=0x{start_addr:x}",
- f"--stop-address=0x{stop_addr:x}" ]
+ "--start-address="+format(start_addr,"#x"),
+ "--stop-address="+format(stop_addr,"#x") ]
disasm += [ dso_fname ]
disasm_output = check_output(disasm).decode('utf-8').split('\n')
disasm_cache[addr_range] = disasm_output
m = disasm_re.search(line)
if m is None:
continue
- print(f"\t{line}")
+ print("\t" + line)
def print_sample(sample):
- print(f"Sample = {{ cpu: {sample['cpu']:04} addr: 0x{sample['addr']:016x} " \
- f"phys_addr: 0x{sample['phys_addr']:016x} ip: 0x{sample['ip']:016x} " \
- f"pid: {sample['pid']} tid: {sample['tid']} period: {sample['period']} time: {sample['time']} }}")
+ print("Sample = { cpu: %04d addr: 0x%016x phys_addr: 0x%016x ip: 0x%016x " \
+ "pid: %d tid: %d period: %d time: %d }" % \
+ (sample['cpu'], sample['addr'], sample['phys_addr'], \
+ sample['ip'], sample['pid'], sample['tid'], \
+ sample['period'], sample['time']))
def trace_begin():
print('ARM CoreSight Trace Data Assembler Dump')
cpu = sample["cpu"]
pid = sample["pid"]
tid = sample["tid"]
- return f"{comm:>16} {pid:>5}/{tid:<5} [{cpu:04}] {sec:9}.{ns:09} "
+ return "%16s %5u/%-5u [%04u] %9u.%09u " % (comm, pid, tid, cpu, sec, ns)
# This code is copied from intel-pt-events.py for printing source code
# line and symbols.
glb_line_number = line_number
glb_source_file_name = source_file_name
- print(f"{start_str}{src_str}")
+ print(start_str, src_str)
def process_event(param_dict):
global cache_size
symbol = get_optional(param_dict, "symbol")
if (options.verbose == True):
- print(f"Event type: {name}")
+ print("Event type: %s" % name)
print_sample(sample)
# If cannot find dso so cannot dump assembler, bail out
# Validate dso start and end addresses
if ((dso_start == '[unknown]') or (dso_end == '[unknown]')):
- print(f"Failed to find valid dso map for dso {dso}")
+ print("Failed to find valid dso map for dso %s" % dso)
return
if (name[0:12] == "instructions"):
# Handle CS_ETM_TRACE_ON packet if start_addr=0 and stop_addr=4
if (start_addr == 0 and stop_addr == 4):
- print(f"CPU{cpu}: CS_ETM_TRACE_ON packet is inserted")
+ print("CPU%d: CS_ETM_TRACE_ON packet is inserted" % cpu)
return
if (start_addr < int(dso_start) or start_addr > int(dso_end)):
- print(f"Start address 0x{start_addr:x} is out of range [ 0x{dso_start:x} .. 0x{dso_end:x} ] for dso {dso}")
+ print("Start address 0x%x is out of range [ 0x%x .. 0x%x ] for dso %s" % (start_addr, int(dso_start), int(dso_end), dso))
return
if (stop_addr < int(dso_start) or stop_addr > int(dso_end)):
- print(f"Stop address 0x{stop_addr:x} is out of range [ 0x{dso_start:x} .. 0x{dso_end:x} ] for dso {dso}")
+ print("Stop address 0x%x is out of range [ 0x%x .. 0x%x ] for dso %s" % (stop_addr, int(dso_start), int(dso_end), dso))
return
if (options.objdump_name != None):
if path.exists(dso_fname):
print_disam(dso_fname, dso_vm_start, start_addr, stop_addr)
else:
- print(f"Failed to find dso {dso} for address range [ 0x{start_addr:x} .. 0x{stop_addr:x} ]")
+ print("Failed to find dso %s for address range [ 0x%x .. 0x%x ]" % (dso, start_addr, stop_addr))
print_srccode(comm, param_dict, sample, symbol, dso)
static struct bpf_perf_object *
bpf_perf_object__next(struct bpf_perf_object *prev)
{
- struct bpf_perf_object *next;
-
- if (!prev)
- next = list_first_entry(&bpf_objects_list,
- struct bpf_perf_object,
- list);
- else
- next = list_next_entry(prev, list);
+ if (!prev) {
+ if (list_empty(&bpf_objects_list))
+ return NULL;
- /* Empty list is noticed here so don't need checking on entry. */
- if (&next->list == &bpf_objects_list)
+ return list_first_entry(&bpf_objects_list, struct bpf_perf_object, list);
+ }
+ if (list_is_last(&prev->list, &bpf_objects_list))
return NULL;
- return next;
+ return list_next_entry(prev, list);
}
#define bpf_perf_object__for_each(perf_obj, tmp) \
return NULL;
}
+static int elf_read_program_header(Elf *elf, u64 vaddr, GElf_Phdr *phdr)
+{
+ size_t i, phdrnum;
+ u64 sz;
+
+ if (elf_getphdrnum(elf, &phdrnum))
+ return -1;
+
+ for (i = 0; i < phdrnum; i++) {
+ if (gelf_getphdr(elf, i, phdr) == NULL)
+ return -1;
+
+ if (phdr->p_type != PT_LOAD)
+ continue;
+
+ sz = max(phdr->p_memsz, phdr->p_filesz);
+ if (!sz)
+ continue;
+
+ if (vaddr >= phdr->p_vaddr && (vaddr < phdr->p_vaddr + sz))
+ return 0;
+ }
+
+ /* Not found any valid program header */
+ return -1;
+}
+
static bool want_demangle(bool is_kernel_sym)
{
return is_kernel_sym ? symbol_conf.demangle_kernel : symbol_conf.demangle;
sym.st_value);
used_opd = true;
}
+
/*
* When loading symbols in a data mapping, ABS symbols (which
* has a value of SHN_ABS in its st_shndx) failed at
gelf_getshdr(sec, &shdr);
+ /*
+ * If the attribute bit SHF_ALLOC is not set, the section
+ * doesn't occupy memory during process execution.
+ * E.g. ".gnu.warning.*" section is used by linker to generate
+ * warnings when calling deprecated functions, the symbols in
+ * the section aren't loaded to memory during process execution,
+ * so skip them.
+ */
+ if (!(shdr.sh_flags & SHF_ALLOC))
+ continue;
+
secstrs = secstrs_sym;
/*
goto out_elf_end;
} else if ((used_opd && runtime_ss->adjust_symbols) ||
(!used_opd && syms_ss->adjust_symbols)) {
+ GElf_Phdr phdr;
+
+ if (elf_read_program_header(syms_ss->elf,
+ (u64)sym.st_value, &phdr)) {
+ pr_warning("%s: failed to find program header for "
+ "symbol: %s st_value: %#" PRIx64 "\n",
+ __func__, elf_name, (u64)sym.st_value);
+ continue;
+ }
pr_debug4("%s: adjusting symbol: st_value: %#" PRIx64 " "
- "sh_addr: %#" PRIx64 " sh_offset: %#" PRIx64 "\n", __func__,
- (u64)sym.st_value, (u64)shdr.sh_addr,
- (u64)shdr.sh_offset);
- sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+ "p_vaddr: %#" PRIx64 " p_offset: %#" PRIx64 "\n",
+ __func__, (u64)sym.st_value, (u64)phdr.p_vaddr,
+ (u64)phdr.p_offset);
+ sym.st_value -= phdr.p_vaddr - phdr.p_offset;
}
demangled = demangle_sym(dso, kmodule, elf_name);
{
int ret = 0;
int fd;
+ uint32_t request;
parse_opts(argc, argv);
/*
* spi mode
*/
+ /* WR is make a request to assign 'mode' */
+ request = mode;
ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode);
if (ret == -1)
pabort("can't set spi mode");
+ /* RD is read what mode the device actually is in */
ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode);
if (ret == -1)
pabort("can't get spi mode");
+ /* Drivers can reject some mode bits without returning an error.
+ * Read the current value to identify what mode it is in, and if it
+ * differs from the requested mode, warn the user.
+ */
+ if (request != mode)
+ printf("WARNING device does not support requested mode 0x%x\n",
+ request);
/*
* bits per word
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
- "la "RSEQ_ASM_TMP_REG_1 ", " __rseq_str(cs_label) "\n" \
+ "la " RSEQ_ASM_TMP_REG_1 ", " __rseq_str(cs_label) "\n" \
REG_S RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(rseq_cs) "]\n" \
__rseq_str(label) ":\n"
#define RSEQ_ASM_OP_CMPEQ(var, expect, label) \
REG_L RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(var) "]\n" \
- "bne "RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
+ "bne " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
__rseq_str(label) "\n"
#define RSEQ_ASM_OP_CMPEQ32(var, expect, label) \
- "lw "RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(var) "]\n" \
- "bne "RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
+ "lw " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(var) "]\n" \
+ "bne " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
__rseq_str(label) "\n"
#define RSEQ_ASM_OP_CMPNE(var, expect, label) \
REG_L RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(var) "]\n" \
- "beq "RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
+ "beq " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(expect) "] ," \
__rseq_str(label) "\n"
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
REG_S RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(var) "]\n"
#define RSEQ_ASM_OP_R_LOAD_OFF(offset) \
- "add "RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(offset) "], " \
+ "add " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(offset) "], " \
RSEQ_ASM_TMP_REG_1 "\n" \
REG_L RSEQ_ASM_TMP_REG_1 ", (" RSEQ_ASM_TMP_REG_1 ")\n"
#define RSEQ_ASM_OP_R_ADD(count) \
- "add "RSEQ_ASM_TMP_REG_1 ", " RSEQ_ASM_TMP_REG_1 \
+ "add " RSEQ_ASM_TMP_REG_1 ", " RSEQ_ASM_TMP_REG_1 \
", %[" __rseq_str(count) "]\n"
#define RSEQ_ASM_OP_FINAL_STORE(value, var, post_commit_label) \
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expectnot] "r" (expectnot),
[load] "m" (*load),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[count] "r" (count)
RSEQ_INJECT_INPUT
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "m" (*v),
[newv] "r" (newv),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "m" (*v),
[newv] "r" (newv),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[v2] "m" (*v2),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "m" (*v),
[newv] "r" (newv),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "m" (*v),
[newv] "r" (newv),
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[ptr] "r" (ptr),
[off] "er" (off),
[inc] "er" (inc)
libc_rseq_offset_p = dlsym(RTLD_NEXT, "__rseq_offset");
libc_rseq_size_p = dlsym(RTLD_NEXT, "__rseq_size");
libc_rseq_flags_p = dlsym(RTLD_NEXT, "__rseq_flags");
- if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p) {
+ if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p &&
+ *libc_rseq_size_p != 0) {
/* rseq registration owned by glibc */
rseq_offset = *libc_rseq_offset_p;
rseq_size = *libc_rseq_size_p;
return l;
}
+static unsigned long read_debug_slab_obj(struct slabinfo *s, const char *name)
+{
+ char x[128];
+ FILE *f;
+ size_t l;
+
+ snprintf(x, 128, "/sys/kernel/debug/slab/%s/%s", s->name, name);
+ f = fopen(x, "r");
+ if (!f) {
+ buffer[0] = 0;
+ l = 0;
+ } else {
+ l = fread(buffer, 1, sizeof(buffer), f);
+ buffer[l] = 0;
+ fclose(f);
+ }
+ return l;
+}
/*
* Put a size string together
{
printf("\n%s: Kernel object allocation\n", s->name);
printf("-----------------------------------------------------------------------\n");
- if (read_slab_obj(s, "alloc_calls"))
+ if (read_debug_slab_obj(s, "alloc_traces"))
+ printf("%s", buffer);
+ else if (read_slab_obj(s, "alloc_calls"))
printf("%s", buffer);
else
printf("No Data\n");
printf("\n%s: Kernel object freeing\n", s->name);
printf("------------------------------------------------------------------------\n");
- if (read_slab_obj(s, "free_calls"))
+ if (read_debug_slab_obj(s, "free_traces"))
+ printf("%s", buffer);
+ else if (read_slab_obj(s, "free_calls"))
printf("%s", buffer);
else
printf("No Data\n");
projects / linux-2.6-microblaze.git / commitdiff