--- /dev/null
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ etm@3007d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007d000 0x1000>;
+
+ /*
+ * System will hang if added nosmp in kernel command line
+ * without arm,primecell-periphid because amba bus try to
+ * read id and core1 power off at this time.
+ */
+ arm,primecell-periphid = <0xbb956>;
+ cpu = <&cpu1>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
+ };
+ };
+};
+
+&aips3 {
+ usbotg2: usb@30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
+
+ fec2: ethernet@30bf0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+};
+
+&ca_funnel_ports {
+ port@1 {
+ reg = <1>;
+ ca_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+};
/*
* Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
};
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
};
intc: interrupt-controller@31001000 {
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ ca_funnel_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
- port@1 {
- reg = <1>;
- ca_funnel_in_port1: endpoint {
- slave-mode;
- remote-endpoint = <&etm1_out_port>;
- };
- };
-
/* funnel output port */
port@2 {
reg = <0>;
};
};
- etm@3007d000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0x3007d000 0x1000>;
-
- /*
- * System will hang if added nosmp in kernel command line
- * without arm,primecell-periphid because amba bus try to
- * read id and core1 power off at this time.
- */
- arm,primecell-periphid = <0xbb956>;
- cpu = <&cpu1>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
- };
- };
- };
-
soc {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- usbotg2: usb@30b20000 {
- compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x30b20000 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_USB_CTRL_CLK>;
- fsl,usbphy = <&usbphynop2>;
- fsl,usbmisc = <&usbmisc2 0>;
- phy-clkgate-delay-us = <400>;
- status = "disabled";
- };
-
usbh: usb@30b30000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
reg = <0x30b10200 0x200>;
};
- usbmisc2: usbmisc@30b20200 {
- #index-cells = <1>;
- compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x30b20200 0x200>;
- };
-
usbmisc3: usbmisc@30b30200 {
#index-cells = <1>;
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
clock-names = "main_clk";
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY2_CLK>;
- clock-names = "main_clk";
- };
-
usbphynop3: usbphynop3 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
fsl,num-rx-queues=<3>;
status = "disabled";
};
-
- fec2: ethernet@30bf0000 {
- compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
- reg = <0x30bf0000 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
- <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
- status = "disabled";
- };
};
};
};
projects / linux-2.6-microblaze.git / commitdiff