arm64: dts: qcom: ipq5018: add QUP1 SPI controller

Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20231004191303.331055-1-robimarko@gmail.com
[bjorn: Padded address to 8 digits, fixed node sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 340b90c..0b73907 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -159,6 +159,16 @@
                        status = "disabled";
                };
 
+               blsp_dma: dma-controller@7884000 {
+                       compatible = "qcom,bam-v1.7.0";
+                       reg = <0x07884000 0x1d000>;
+                       interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+                       clock-names = "bam_clk";
+                       #dma-cells = <1>;
+                       qcom,ee = <0>;
+               };
+
                blsp1_uart1: serial@78af000 {
                        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
                        reg = <0x078af000 0x200>;
@@ -169,6 +179,20 @@
                        status = "disabled";
                };
 
+               blsp1_spi1: spi@78b5000 {
+                       compatible = "qcom,spi-qup-v2.2.1";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x078b5000 0x600>;
+                       interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+                                <&gcc GCC_BLSP1_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+                       dma-names = "tx", "rx";
+                       status = "disabled";
+               };
+
                usb: usb@8af8800 {
                        compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
                        reg = <0x08af8800 0x400>;