ide: remove ->init_setup_dma from ide_pci_device_t (take 2)
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Thu, 18 Oct 2007 22:30:07 +0000 (00:30 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Thu, 18 Oct 2007 22:30:07 +0000 (00:30 +0200)
* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.

* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
  and use d->name instead of hwif->cds->name.

* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
  ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
  needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.

  This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.

v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
  (Noticed by Alan).

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/cs5520.c
drivers/ide/setup-pci.c
include/linux/ide.h

index 17d35ca..4fb4320 100644 (file)
@@ -105,18 +105,6 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
        cs5520_set_pio_mode(drive, 0);
 }
 
-/*
- *     We provide a callback for our nonstandard DMA location
- */
-
-static void __devinit cs5520_init_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
-{
-       unsigned long bmide = pci_resource_start(dev, 2);       /* Not the usual 4 */
-       if(hwif->mate && hwif->mate->dma_base)  /* Second channel at primary + 8 */
-               bmide += 8;
-       ide_setup_dma(hwif, bmide, 8);
-}
-
 /*
  *     We wrap the DMA activate to set the vdma flag. This is needed
  *     so that the IDE DMA layer issues PIO not DMA commands over the
@@ -150,9 +138,9 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
 #define DECLARE_CS_DEV(name_str)                               \
        {                                                       \
                .name           = name_str,                     \
-               .init_setup_dma = cs5520_init_setup_dma,        \
                .init_hwif      = init_hwif_cs5520,             \
                .host_flags     = IDE_HFLAG_ISA_PORTS |         \
+                                 IDE_HFLAG_CS5520 |            \
                                  IDE_HFLAG_VDMA |              \
                                  IDE_HFLAG_NO_ATAPI_DMA |      \
                                  IDE_HFLAG_BOOTABLE,           \
index 26061fe..479add4 100644 (file)
@@ -147,6 +147,7 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 /**
  *     ide_get_or_set_dma_base         -       setup BMIBA
+ *     @d: IDE pci device data
  *     @hwif: Interface
  *
  *     Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
@@ -154,7 +155,7 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
  *     and enforce IDE simplex rules.
  */
 
-static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
+static unsigned long ide_get_or_set_dma_base(ide_pci_device_t *d, ide_hwif_t *hwif)
 {
        unsigned long   dma_base = 0;
        struct pci_dev  *dev = hwif->pci_dev;
@@ -165,14 +166,15 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
        if (hwif->mate && hwif->mate->dma_base) {
                dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
        } else {
-               dma_base = pci_resource_start(dev, 4);
-               if (!dma_base) {
-                       printk(KERN_ERR "%s: dma_base is invalid\n",
-                                       hwif->cds->name);
-               }
+               u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
+
+               dma_base = pci_resource_start(dev, baridx);
+
+               if (dma_base == 0)
+                       printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
        }
 
-       if (dma_base) {
+       if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
                u8 simplex_stat = 0;
                dma_base += hwif->channel ? 8 : 0;
 
@@ -188,8 +190,8 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
                                simplex_stat = hwif->INB(dma_base + 2);
                                if (simplex_stat & 0x80) {
                                        printk(KERN_INFO "%s: simplex device: "
-                                               "DMA forced\n",
-                                               hwif->cds->name);
+                                                        "DMA forced\n",
+                                                        d->name);
                                }
                                break;
                        default:
@@ -212,8 +214,8 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
  */
                                        if (hwif->mate && hwif->mate->dma_base) {
                                                printk(KERN_INFO "%s: simplex device: "
-                                                       "DMA disabled\n",
-                                                       hwif->cds->name);
+                                                                "DMA disabled\n",
+                                                                d->name);
                                                dma_base = 0;
                                        }
                                }
@@ -434,7 +436,7 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwi
        if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
            ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
             (dev->class & 0x80))) {
-               unsigned long dma_base = ide_get_or_set_dma_base(hwif);
+               unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
                if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
                        /*
                         * Set up BM-DMA capability
@@ -559,14 +561,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
                if (d->init_iops)
                        d->init_iops(hwif);
 
-               if (d->host_flags & IDE_HFLAG_NO_DMA)
-                       goto bypass_legacy_dma;
-
-               if(d->init_setup_dma)
-                       d->init_setup_dma(dev, d, hwif);
-               else
+               if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
                        ide_hwif_setup_dma(dev, d, hwif);
-bypass_legacy_dma:
+
                hwif->host_flags = d->host_flags;
                hwif->pio_mask = d->pio_mask;
 
index 6f375e0..b721f0b 100644 (file)
@@ -1252,6 +1252,8 @@ enum {
        IDE_HFLAG_NO_DMA                = (1 << 14),
        /* check if host is PCI IDE device before allowing DMA */
        IDE_HFLAG_NO_AUTODMA            = (1 << 15),
+       /* host is CS5510/CS5520 */
+       IDE_HFLAG_CS5520                = (1 << 16),
 };
 
 #ifdef CONFIG_BLK_DEV_OFFBOARD
@@ -1263,7 +1265,6 @@ enum {
 typedef struct ide_pci_device_s {
        char                    *name;
        int                     (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
-       void                    (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
        unsigned int            (*init_chipset)(struct pci_dev *, const char *);
        void                    (*init_iops)(ide_hwif_t *);
        void                    (*init_hwif)(ide_hwif_t *);
@@ -1272,7 +1273,7 @@ typedef struct ide_pci_device_s {
        ide_pci_enablebit_t     enablebits[2];
        unsigned int            extra;
        struct ide_pci_device_s *next;
-       u16                     host_flags;
+       u32                     host_flags;
        u8                      pio_mask;
        u8                      udma_mask;
 } ide_pci_device_t;