#include <asm/ptrace.h>
#include <asm/processor.h>
-#include <asm/extable_64.h>
#include <asm/spitfire.h>
#include <asm/adi.h>
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_EXTABLE_H
+#define __ASM_EXTABLE_H
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned int insn, fixup;
+};
+
+#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_EXTABLE64_H
-#define __ASM_EXTABLE64_H
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned int insn, fixup;
-};
-
-#endif
unsigned long fsr;
unsigned long fpqdepth;
struct fpq fpqueue[16];
- unsigned long flags;
mm_segment_t current_ds;
};
-#define SPARC_FLAG_KTHREAD 0x1 /* task is a kernel thread */
-#define SPARC_FLAG_UNALIGNED 0x2 /* is allowed to do unaligned accesses */
-
#define INIT_THREAD { \
- .flags = SPARC_FLAG_KTHREAD, \
.current_ds = KERNEL_DS, \
+ .kregs = (struct pt_regs *)(init_stack+THREAD_SIZE)-1 \
}
/* Do necessary setup to start up a newly executed thread. */
.task = &tsk, \
.current_ds = ASI_P, \
.preempt_count = INIT_PREEMPT_COUNT, \
+ .kregs = (struct pt_regs *)(init_stack+THREAD_SIZE)-1 \
}
/* how to get the thread information struct from C */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef ___ASM_SPARC_UACCESS_H
#define ___ASM_SPARC_UACCESS_H
+
+#include <asm/extable.h>
+
#if defined(__sparc__) && defined(__arch64__)
#include <asm/uaccess_64.h>
#else
#include <asm/processor.h>
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
-
/* Sparc is not segmented, however we need to be able to fool access_ok()
* when doing system calls from kernel mode legitimately.
*
#define __access_ok(addr, size) (__user_ok((addr) & get_fs().seg, (size)))
#define access_ok(addr, size) __access_ok((unsigned long)(addr), size)
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- *
- * There is a special way how to put a range of potentially faulting
- * insns (like twenty ldd/std's with now intervening other instructions)
- * You specify address of first in insn and 0 in fixup and in the next
- * exception_table_entry you specify last potentially faulting insn + 1
- * and in fixup the routine which should handle the fault.
- * That fixup code will get
- * (faulting_insn_address - first_insn_in_the_range_address)/4
- * in %g2 (ie. index of the faulting instruction in the range).
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
-
/* Uh, these should become the main single-value transfer routines..
* They automatically use the right size if we just have the right
* pointer type..
unsigned long ret;
__asm__ __volatile__ (
- ".section __ex_table,#alloc\n\t"
- ".align 4\n\t"
- ".word 1f,3\n\t"
- ".previous\n\t"
"mov %2, %%o1\n"
- "1:\n\t"
"call __bzero\n\t"
" mov %1, %%o0\n\t"
"mov %%o0, %0\n"
#include <linux/string.h>
#include <asm/asi.h>
#include <asm/spitfire.h>
-#include <asm/extable_64.h>
#include <asm/processor.h>
/* I want a kernel stack NOW! */
set init_thread_union, %g1
- set (THREAD_SIZE - STACKFRAME_SZ), %g2
+ set (THREAD_SIZE - STACKFRAME_SZ - TRACEREG_SZ), %g2
add %g1, %g2, %sp
mov 0, %fp /* And for good luck */
wr %g0, ASI_P, %asi
mov 1, %g1
sllx %g1, THREAD_SHIFT, %g1
- sub %g1, (STACKFRAME_SZ + STACK_BIAS), %g1
+ sub %g1, (STACKFRAME_SZ + STACK_BIAS + TRACEREG_SZ), %g1
add %g6, %g1, %sp
/* Set per-cpu pointer initially to zero, this makes
clear_thread_flag(TIF_USEDFPU);
#endif
}
-
- /* This task is no longer a kernel thread. */
- if (current->thread.flags & SPARC_FLAG_KTHREAD) {
- current->thread.flags &= ~SPARC_FLAG_KTHREAD;
-
- /* We must fixup kregs as well. */
- /* XXX This was not fixed for ti for a while, worked. Unused? */
- current->thread.kregs = (struct pt_regs *)
- (task_stack_page(current) + (THREAD_SIZE - TRACEREG_SZ));
- }
}
static inline struct sparc_stackf __user *
extern int nwindows;
unsigned long psr;
memset(new_stack, 0, STACKFRAME_SZ + TRACEREG_SZ);
- p->thread.flags |= SPARC_FLAG_KTHREAD;
p->thread.current_ds = KERNEL_DS;
ti->kpc = (((unsigned long) ret_from_kernel_thread) - 0x8);
childregs->u_regs[UREG_G1] = sp; /* function */
}
memcpy(new_stack, (char *)regs - STACKFRAME_SZ, STACKFRAME_SZ + TRACEREG_SZ);
childregs->u_regs[UREG_FP] = sp;
- p->thread.flags &= ~SPARC_FLAG_KTHREAD;
p->thread.current_ds = USER_DS;
ti->kpc = (((unsigned long) ret_from_fork) - 0x8);
ti->kpsr = current->thread.fork_kpsr | PSR_PIL;
}
struct tt_entry *sparc_ttable;
-static struct pt_regs fake_swapper_regs;
/* Called from head_32.S - before we have setup anything
* in the kernel. Be very careful with what you do here.
(*(linux_dbvec->teach_debugger))();
}
- init_task.thread.kregs = &fake_swapper_regs;
-
/* Run-time patch instructions to match the cpu model */
per_cpu_patch();
char reboot_command[COMMAND_LINE_SIZE];
-static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
-
static void __init per_cpu_patch(void)
{
struct cpuid_patch_entry *p;
rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK;
#endif
- task_thread_info(&init_task)->kregs = &fake_swapper_regs;
-
#ifdef CONFIG_IP_PNP
if (!ic_set_manually) {
phandle chosen = prom_finddevice("/chosen");
#include <linux/uaccess.h>
#include <linux/smp.h>
#include <linux/perf_event.h>
+#include <linux/extable.h>
#include <asm/setup.h>
static void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
{
- unsigned long g2 = regs->u_regs [UREG_G2];
- unsigned long fixup = search_extables_range(regs->pc, &g2);
+ const struct exception_table_entry *entry;
- if (!fixup) {
+ entry = search_exception_tables(regs->pc);
+ if (!entry) {
unsigned long address = compute_effective_address(regs, insn);
if(address < PAGE_SIZE) {
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler");
die_if_kernel("Oops", regs);
/* Not reached */
}
- regs->pc = fixup;
+ regs->pc = entry->fixup;
regs->npc = regs->pc + 4;
- regs->u_regs [UREG_G2] = g2;
}
asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
}
}
-static inline int ok_for_user(struct pt_regs *regs, unsigned int insn,
- enum direction dir)
-{
- unsigned int reg;
- int size = ((insn >> 19) & 3) == 3 ? 8 : 4;
-
- if ((regs->pc | regs->npc) & 3)
- return 0;
-
- /* Must access_ok() in all the necessary places. */
-#define WINREG_ADDR(regnum) \
- ((void __user *)(((unsigned long *)regs->u_regs[UREG_FP])+(regnum)))
-
- reg = (insn >> 25) & 0x1f;
- if (reg >= 16) {
- if (!access_ok(WINREG_ADDR(reg - 16), size))
- return -EFAULT;
- }
- reg = (insn >> 14) & 0x1f;
- if (reg >= 16) {
- if (!access_ok(WINREG_ADDR(reg - 16), size))
- return -EFAULT;
- }
- if (!(insn & 0x2000)) {
- reg = (insn & 0x1f);
- if (reg >= 16) {
- if (!access_ok(WINREG_ADDR(reg - 16), size))
- return -EFAULT;
- }
- }
-#undef WINREG_ADDR
- return 0;
-}
-
-static void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
{
send_sig_fault(SIGBUS, BUS_ADRALN,
(void __user *)safe_compute_effective_address(regs, insn),
0, current);
}
-
-asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
-{
- enum direction dir;
-
- if(!(current->thread.flags & SPARC_FLAG_UNALIGNED) ||
- (((insn >> 30) & 3) != 3))
- goto kill_user;
- dir = decode_direction(insn);
- if(!ok_for_user(regs, insn, dir)) {
- goto kill_user;
- } else {
- int err, size = decode_access_size(insn);
- unsigned long addr;
-
- if(floating_point_load_or_store_p(insn)) {
- printk("User FPU load/store unaligned unsupported.\n");
- goto kill_user;
- }
-
- addr = compute_effective_address(regs, insn);
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, addr);
- switch(dir) {
- case load:
- err = do_int_load(fetch_reg_addr(((insn>>25)&0x1f),
- regs),
- size, (unsigned long *) addr,
- decode_signedness(insn));
- break;
-
- case store:
- err = do_int_store(((insn>>25)&0x1f), size,
- (unsigned long *) addr, regs);
- break;
-
- case both:
- /*
- * This was supported in 2.4. However, we question
- * the value of SWAP instruction across word boundaries.
- */
- printk("Unaligned SWAP unsupported.\n");
- err = -EFAULT;
- break;
-
- default:
- unaligned_panic("Impossible user unaligned trap.");
- goto out;
- }
- if (err)
- goto kill_user;
- else
- advance(regs);
- goto out;
- }
-
-kill_user:
- user_mna_trap_fault(regs, insn);
-out:
- ;
-}
.text; \
.align 4
-#define EXT(start,end) \
- .section __ex_table,ALLOC; \
- .align 4; \
- .word start, 0, end, cc_fault; \
- .text; \
- .align 4
-
/* This aligned version executes typically in 8.5 superscalar cycles, this
* is the best I can do. I say 8.5 because the final add will pair with
* the next ldd in the main unrolled loop. Thus the pipe is always full.
* please check the fixup code below as well.
*/
#define CSUMCOPY_BIGCHUNK_ALIGNED(src, dst, sum, off, t0, t1, t2, t3, t4, t5, t6, t7) \
- ldd [src + off + 0x00], t0; \
- ldd [src + off + 0x08], t2; \
+ EX(ldd [src + off + 0x00], t0); \
+ EX(ldd [src + off + 0x08], t2); \
addxcc t0, sum, sum; \
- ldd [src + off + 0x10], t4; \
+ EX(ldd [src + off + 0x10], t4); \
addxcc t1, sum, sum; \
- ldd [src + off + 0x18], t6; \
+ EX(ldd [src + off + 0x18], t6); \
addxcc t2, sum, sum; \
- std t0, [dst + off + 0x00]; \
+ EX(std t0, [dst + off + 0x00]); \
addxcc t3, sum, sum; \
- std t2, [dst + off + 0x08]; \
+ EX(std t2, [dst + off + 0x08]); \
addxcc t4, sum, sum; \
- std t4, [dst + off + 0x10]; \
+ EX(std t4, [dst + off + 0x10]); \
addxcc t5, sum, sum; \
- std t6, [dst + off + 0x18]; \
+ EX(std t6, [dst + off + 0x18]); \
addxcc t6, sum, sum; \
addxcc t7, sum, sum;
* Viking MXCC into streaming mode. Ho hum...
*/
#define CSUMCOPY_BIGCHUNK(src, dst, sum, off, t0, t1, t2, t3, t4, t5, t6, t7) \
- ldd [src + off + 0x00], t0; \
- ldd [src + off + 0x08], t2; \
- ldd [src + off + 0x10], t4; \
- ldd [src + off + 0x18], t6; \
- st t0, [dst + off + 0x00]; \
+ EX(ldd [src + off + 0x00], t0); \
+ EX(ldd [src + off + 0x08], t2); \
+ EX(ldd [src + off + 0x10], t4); \
+ EX(ldd [src + off + 0x18], t6); \
+ EX(st t0, [dst + off + 0x00]); \
addxcc t0, sum, sum; \
- st t1, [dst + off + 0x04]; \
+ EX(st t1, [dst + off + 0x04]); \
addxcc t1, sum, sum; \
- st t2, [dst + off + 0x08]; \
+ EX(st t2, [dst + off + 0x08]); \
addxcc t2, sum, sum; \
- st t3, [dst + off + 0x0c]; \
+ EX(st t3, [dst + off + 0x0c]); \
addxcc t3, sum, sum; \
- st t4, [dst + off + 0x10]; \
+ EX(st t4, [dst + off + 0x10]); \
addxcc t4, sum, sum; \
- st t5, [dst + off + 0x14]; \
+ EX(st t5, [dst + off + 0x14]); \
addxcc t5, sum, sum; \
- st t6, [dst + off + 0x18]; \
+ EX(st t6, [dst + off + 0x18]); \
addxcc t6, sum, sum; \
- st t7, [dst + off + 0x1c]; \
+ EX(st t7, [dst + off + 0x1c]); \
addxcc t7, sum, sum;
/* Yuck, 6 superscalar cycles... */
#define CSUMCOPY_LASTCHUNK(src, dst, sum, off, t0, t1, t2, t3) \
- ldd [src - off - 0x08], t0; \
- ldd [src - off - 0x00], t2; \
+ EX(ldd [src - off - 0x08], t0); \
+ EX(ldd [src - off - 0x00], t2); \
addxcc t0, sum, sum; \
- st t0, [dst - off - 0x08]; \
+ EX(st t0, [dst - off - 0x08]); \
addxcc t1, sum, sum; \
- st t1, [dst - off - 0x04]; \
+ EX(st t1, [dst - off - 0x04]); \
addxcc t2, sum, sum; \
- st t2, [dst - off - 0x00]; \
+ EX(st t2, [dst - off - 0x00]); \
addxcc t3, sum, sum; \
- st t3, [dst - off + 0x04];
+ EX(st t3, [dst - off + 0x04]);
/* Handle the end cruft code out of band for better cache patterns. */
cc_end_cruft:
CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x20,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x40,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x60,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
-10: EXT(5b, 10b) ! note for exception handling
sub %g1, 128, %g1 ! detract from length
addx %g0, %g7, %g7 ! add in last carry bit
andcc %g1, 0xffffff80, %g0 ! more to csum?
CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x28,%g2,%g3,%g4,%g5)
CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x18,%g2,%g3,%g4,%g5)
CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x08,%g2,%g3,%g4,%g5)
-12: EXT(cctbl, 12b) ! note for exception table handling
- addx %g0, %g7, %g7
+12: addx %g0, %g7, %g7
andcc %o3, 0xf, %g0 ! check for low bits set
ccte: bne cc_end_cruft ! something left, handle it out of band
andcc %o3, 8, %g0 ! begin checks for that code
CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x20,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x40,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x60,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3)
-11: EXT(ccdbl, 11b) ! note for exception table handling
sub %g1, 128, %g1 ! detract from length
addx %g0, %g7, %g7 ! add in last carry bit
andcc %g1, 0xffffff80, %g0 ! more to csum?
/* Work around cpp -rob */
#define ALLOC #alloc
#define EXECINSTR #execinstr
+
+#define EX_ENTRY(l1, l2) \
+ .section __ex_table,ALLOC; \
+ .align 4; \
+ .word l1, l2; \
+ .text;
+
#define EX(x,y,a,b) \
98: x,y; \
.section .fixup,ALLOC,EXECINSTR; \
.align 4; \
-99: ba fixupretl; \
- a, b, %g3; \
- .section __ex_table,ALLOC; \
- .align 4; \
- .word 98b, 99b; \
- .text; \
- .align 4
+99: retl; \
+ a, b, %o0; \
+ EX_ENTRY(98b, 99b)
#define EX2(x,y,c,d,e,a,b) \
98: x,y; \
.section .fixup,ALLOC,EXECINSTR; \
.align 4; \
99: c, d, e; \
- ba fixupretl; \
- a, b, %g3; \
- .section __ex_table,ALLOC; \
- .align 4; \
- .word 98b, 99b; \
- .text; \
- .align 4
+ retl; \
+ a, b, %o0; \
+ EX_ENTRY(98b, 99b)
#define EXO2(x,y) \
98: x, y; \
- .section __ex_table,ALLOC; \
- .align 4; \
- .word 98b, 97f; \
- .text; \
- .align 4
+ EX_ENTRY(98b, 97f)
-#define EXT(start,end,handler) \
- .section __ex_table,ALLOC; \
- .align 4; \
- .word start, 0, end, handler; \
- .text; \
- .align 4
+#define LD(insn, src, offset, reg, label) \
+98: insn [%src + (offset)], %reg; \
+ .section .fixup,ALLOC,EXECINSTR; \
+99: ba label; \
+ mov offset, %g5; \
+ EX_ENTRY(98b, 99b)
-/* Please do not change following macros unless you change logic used
- * in .fixup at the end of this file as well
- */
+#define ST(insn, dst, offset, reg, label) \
+98: insn %reg, [%dst + (offset)]; \
+ .section .fixup,ALLOC,EXECINSTR; \
+99: ba label; \
+ mov offset, %g5; \
+ EX_ENTRY(98b, 99b)
/* Both these macros have to start with exactly the same insn */
+/* left: g7 + (g1 % 128) - offset */
#define MOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
- ldd [%src + (offset) + 0x00], %t0; \
- ldd [%src + (offset) + 0x08], %t2; \
- ldd [%src + (offset) + 0x10], %t4; \
- ldd [%src + (offset) + 0x18], %t6; \
- st %t0, [%dst + (offset) + 0x00]; \
- st %t1, [%dst + (offset) + 0x04]; \
- st %t2, [%dst + (offset) + 0x08]; \
- st %t3, [%dst + (offset) + 0x0c]; \
- st %t4, [%dst + (offset) + 0x10]; \
- st %t5, [%dst + (offset) + 0x14]; \
- st %t6, [%dst + (offset) + 0x18]; \
- st %t7, [%dst + (offset) + 0x1c];
-
+ LD(ldd, src, offset + 0x00, t0, bigchunk_fault) \
+ LD(ldd, src, offset + 0x08, t2, bigchunk_fault) \
+ LD(ldd, src, offset + 0x10, t4, bigchunk_fault) \
+ LD(ldd, src, offset + 0x18, t6, bigchunk_fault) \
+ ST(st, dst, offset + 0x00, t0, bigchunk_fault) \
+ ST(st, dst, offset + 0x04, t1, bigchunk_fault) \
+ ST(st, dst, offset + 0x08, t2, bigchunk_fault) \
+ ST(st, dst, offset + 0x0c, t3, bigchunk_fault) \
+ ST(st, dst, offset + 0x10, t4, bigchunk_fault) \
+ ST(st, dst, offset + 0x14, t5, bigchunk_fault) \
+ ST(st, dst, offset + 0x18, t6, bigchunk_fault) \
+ ST(st, dst, offset + 0x1c, t7, bigchunk_fault)
+
+/* left: g7 + (g1 % 128) - offset */
#define MOVE_BIGALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
- ldd [%src + (offset) + 0x00], %t0; \
- ldd [%src + (offset) + 0x08], %t2; \
- ldd [%src + (offset) + 0x10], %t4; \
- ldd [%src + (offset) + 0x18], %t6; \
- std %t0, [%dst + (offset) + 0x00]; \
- std %t2, [%dst + (offset) + 0x08]; \
- std %t4, [%dst + (offset) + 0x10]; \
- std %t6, [%dst + (offset) + 0x18];
+ LD(ldd, src, offset + 0x00, t0, bigchunk_fault) \
+ LD(ldd, src, offset + 0x08, t2, bigchunk_fault) \
+ LD(ldd, src, offset + 0x10, t4, bigchunk_fault) \
+ LD(ldd, src, offset + 0x18, t6, bigchunk_fault) \
+ ST(std, dst, offset + 0x00, t0, bigchunk_fault) \
+ ST(std, dst, offset + 0x08, t2, bigchunk_fault) \
+ ST(std, dst, offset + 0x10, t4, bigchunk_fault) \
+ ST(std, dst, offset + 0x18, t6, bigchunk_fault)
+ .section .fixup,#alloc,#execinstr
+bigchunk_fault:
+ sub %g7, %g5, %o0
+ and %g1, 127, %g1
+ retl
+ add %o0, %g1, %o0
+
+/* left: offset + 16 + (g1 % 16) */
#define MOVE_LASTCHUNK(src, dst, offset, t0, t1, t2, t3) \
- ldd [%src - (offset) - 0x10], %t0; \
- ldd [%src - (offset) - 0x08], %t2; \
- st %t0, [%dst - (offset) - 0x10]; \
- st %t1, [%dst - (offset) - 0x0c]; \
- st %t2, [%dst - (offset) - 0x08]; \
- st %t3, [%dst - (offset) - 0x04];
+ LD(ldd, src, -(offset + 0x10), t0, lastchunk_fault) \
+ LD(ldd, src, -(offset + 0x08), t2, lastchunk_fault) \
+ ST(st, dst, -(offset + 0x10), t0, lastchunk_fault) \
+ ST(st, dst, -(offset + 0x0c), t1, lastchunk_fault) \
+ ST(st, dst, -(offset + 0x08), t2, lastchunk_fault) \
+ ST(st, dst, -(offset + 0x04), t3, lastchunk_fault)
-#define MOVE_HALFCHUNK(src, dst, offset, t0, t1, t2, t3) \
- lduh [%src + (offset) + 0x00], %t0; \
- lduh [%src + (offset) + 0x02], %t1; \
- lduh [%src + (offset) + 0x04], %t2; \
- lduh [%src + (offset) + 0x06], %t3; \
- sth %t0, [%dst + (offset) + 0x00]; \
- sth %t1, [%dst + (offset) + 0x02]; \
- sth %t2, [%dst + (offset) + 0x04]; \
- sth %t3, [%dst + (offset) + 0x06];
+ .section .fixup,#alloc,#execinstr
+lastchunk_fault:
+ and %g1, 15, %g1
+ retl
+ sub %g1, %g5, %o0
+/* left: o3 + (o2 % 16) - offset */
+#define MOVE_HALFCHUNK(src, dst, offset, t0, t1, t2, t3) \
+ LD(lduh, src, offset + 0x00, t0, halfchunk_fault) \
+ LD(lduh, src, offset + 0x02, t1, halfchunk_fault) \
+ LD(lduh, src, offset + 0x04, t2, halfchunk_fault) \
+ LD(lduh, src, offset + 0x06, t3, halfchunk_fault) \
+ ST(sth, dst, offset + 0x00, t0, halfchunk_fault) \
+ ST(sth, dst, offset + 0x02, t1, halfchunk_fault) \
+ ST(sth, dst, offset + 0x04, t2, halfchunk_fault) \
+ ST(sth, dst, offset + 0x06, t3, halfchunk_fault)
+
+/* left: o3 + (o2 % 16) + offset + 2 */
#define MOVE_SHORTCHUNK(src, dst, offset, t0, t1) \
- ldub [%src - (offset) - 0x02], %t0; \
- ldub [%src - (offset) - 0x01], %t1; \
- stb %t0, [%dst - (offset) - 0x02]; \
- stb %t1, [%dst - (offset) - 0x01];
+ LD(ldub, src, -(offset + 0x02), t0, halfchunk_fault) \
+ LD(ldub, src, -(offset + 0x01), t1, halfchunk_fault) \
+ ST(stb, dst, -(offset + 0x02), t0, halfchunk_fault) \
+ ST(stb, dst, -(offset + 0x01), t1, halfchunk_fault)
+
+ .section .fixup,#alloc,#execinstr
+halfchunk_fault:
+ and %o2, 15, %o2
+ sub %o3, %g5, %o3
+ retl
+ add %o2, %o3, %o0
+
+/* left: offset + 2 + (o2 % 2) */
+#define MOVE_LAST_SHORTCHUNK(src, dst, offset, t0, t1) \
+ LD(ldub, src, -(offset + 0x02), t0, last_shortchunk_fault) \
+ LD(ldub, src, -(offset + 0x01), t1, last_shortchunk_fault) \
+ ST(stb, dst, -(offset + 0x02), t0, last_shortchunk_fault) \
+ ST(stb, dst, -(offset + 0x01), t1, last_shortchunk_fault)
+
+ .section .fixup,#alloc,#execinstr
+last_shortchunk_fault:
+ and %o2, 1, %o2
+ retl
+ sub %o2, %g5, %o0
.text
.align 4
MOVE_BIGCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
-80:
- EXT(5b, 80b, 50f)
subcc %g7, 128, %g7
add %o1, 128, %o1
bne 5b
jmpl %o5 + %lo(copy_user_table_end), %g0
add %o0, %g7, %o0
-copy_user_table:
MOVE_LASTCHUNK(o1, o0, 0x60, g2, g3, g4, g5)
MOVE_LASTCHUNK(o1, o0, 0x50, g2, g3, g4, g5)
MOVE_LASTCHUNK(o1, o0, 0x40, g2, g3, g4, g5)
MOVE_LASTCHUNK(o1, o0, 0x10, g2, g3, g4, g5)
MOVE_LASTCHUNK(o1, o0, 0x00, g2, g3, g4, g5)
copy_user_table_end:
- EXT(copy_user_table, copy_user_table_end, 51f)
be copy_user_last7
andcc %g1, 4, %g0
MOVE_BIGALIGNCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGALIGNCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGALIGNCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
-81:
- EXT(ldd_std, 81b, 52f)
subcc %g7, 128, %g7
add %o1, 128, %o1
bne ldd_std
10:
MOVE_HALFCHUNK(o1, o0, 0x00, g2, g3, g4, g5)
MOVE_HALFCHUNK(o1, o0, 0x08, g2, g3, g4, g5)
-82:
- EXT(10b, 82b, 53f)
subcc %o3, 0x10, %o3
add %o1, 0x10, %o1
bne 10b
MOVE_SHORTCHUNK(o1, o0, -0x0c, g2, g3)
MOVE_SHORTCHUNK(o1, o0, -0x0e, g2, g3)
MOVE_SHORTCHUNK(o1, o0, -0x10, g2, g3)
-83:
- EXT(byte_chunk, 83b, 54f)
subcc %o3, 0x10, %o3
add %o1, 0x10, %o1
bne byte_chunk
add %o1, %o3, %o1
jmpl %o5 + %lo(short_table_end), %g0
andcc %o2, 1, %g0
-84:
- MOVE_SHORTCHUNK(o1, o0, 0x0c, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x0a, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x08, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x06, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x04, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x02, g2, g3)
- MOVE_SHORTCHUNK(o1, o0, 0x00, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x0c, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x0a, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x08, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x06, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x04, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x02, g2, g3)
+ MOVE_LAST_SHORTCHUNK(o1, o0, 0x00, g2, g3)
short_table_end:
- EXT(84b, short_table_end, 55f)
be 1f
nop
EX(ldub [%o1], %g2, add %g0, 1)
.section .fixup,#alloc,#execinstr
.align 4
97:
- mov %o2, %g3
-fixupretl:
retl
- mov %g3, %o0
-
-/* exception routine sets %g2 to (broken_insn - first_insn)>>2 */
-50:
-/* This magic counts how many bytes are left when crash in MOVE_BIGCHUNK
- * happens. This is derived from the amount ldd reads, st stores, etc.
- * x = g2 % 12;
- * g3 = g1 + g7 - ((g2 / 12) * 32 + (x < 4) ? 0 : (x - 4) * 4);
- * o0 += (g2 / 12) * 32;
- */
- cmp %g2, 12
- add %o0, %g7, %o0
- bcs 1f
- cmp %g2, 24
- bcs 2f
- cmp %g2, 36
- bcs 3f
- nop
- sub %g2, 12, %g2
- sub %g7, 32, %g7
-3: sub %g2, 12, %g2
- sub %g7, 32, %g7
-2: sub %g2, 12, %g2
- sub %g7, 32, %g7
-1: cmp %g2, 4
- bcs,a 60f
- clr %g2
- sub %g2, 4, %g2
- sll %g2, 2, %g2
-60: and %g1, 0x7f, %g3
- sub %o0, %g7, %o0
- add %g3, %g7, %g3
- ba fixupretl
- sub %g3, %g2, %g3
-51:
-/* i = 41 - g2; j = i % 6;
- * g3 = (g1 & 15) + (i / 6) * 16 + (j < 4) ? (j + 1) * 4 : 16;
- * o0 -= (i / 6) * 16 + 16;
- */
- neg %g2
- and %g1, 0xf, %g1
- add %g2, 41, %g2
- add %o0, %g1, %o0
-1: cmp %g2, 6
- bcs,a 2f
- cmp %g2, 4
- add %g1, 16, %g1
- b 1b
- sub %g2, 6, %g2
-2: bcc,a 2f
- mov 16, %g2
- inc %g2
- sll %g2, 2, %g2
-2: add %g1, %g2, %g3
- ba fixupretl
- sub %o0, %g3, %o0
-52:
-/* g3 = g1 + g7 - (g2 / 8) * 32 + (g2 & 4) ? (g2 & 3) * 8 : 0;
- o0 += (g2 / 8) * 32 */
- andn %g2, 7, %g4
- add %o0, %g7, %o0
- andcc %g2, 4, %g0
- and %g2, 3, %g2
- sll %g4, 2, %g4
- sll %g2, 3, %g2
- bne 60b
- sub %g7, %g4, %g7
- ba 60b
- clr %g2
-53:
-/* g3 = o3 + (o2 & 15) - (g2 & 8) - (g2 & 4) ? (g2 & 3) * 2 : 0;
- o0 += (g2 & 8) */
- and %g2, 3, %g4
- andcc %g2, 4, %g0
- and %g2, 8, %g2
- sll %g4, 1, %g4
- be 1f
- add %o0, %g2, %o0
- add %g2, %g4, %g2
-1: and %o2, 0xf, %g3
- add %g3, %o3, %g3
- ba fixupretl
- sub %g3, %g2, %g3
-54:
-/* g3 = o3 + (o2 & 15) - (g2 / 4) * 2 - (g2 & 2) ? (g2 & 1) : 0;
- o0 += (g2 / 4) * 2 */
- srl %g2, 2, %o4
- and %g2, 1, %o5
- srl %g2, 1, %g2
- add %o4, %o4, %o4
- and %o5, %g2, %o5
- and %o2, 0xf, %o2
- add %o0, %o4, %o0
- sub %o3, %o5, %o3
- sub %o2, %o4, %o2
- ba fixupretl
- add %o2, %o3, %g3
-55:
-/* i = 27 - g2;
- g3 = (o2 & 1) + i / 4 * 2 + !(i & 3);
- o0 -= i / 4 * 2 + 1 */
- neg %g2
- and %o2, 1, %o2
- add %g2, 27, %g2
- srl %g2, 2, %o5
- andcc %g2, 3, %g0
- mov 1, %g2
- add %o5, %o5, %o5
- be,a 1f
- clr %g2
-1: add %g2, %o5, %g3
- sub %o0, %g3, %o0
- ba fixupretl
- add %g3, %o2, %g3
+ mov %o2, %o0
.globl __copy_user_end
__copy_user_end:
98: x,y; \
.section .fixup,ALLOC,EXECINSTR; \
.align 4; \
-99: ba 30f; \
+99: retl; \
a, b, %o0; \
.section __ex_table,ALLOC; \
.align 4; \
.text; \
.align 4
-#define EXT(start,end,handler) \
+#define STORE(source, base, offset, n) \
+98: std source, [base + offset + n]; \
+ .section .fixup,ALLOC,EXECINSTR; \
+ .align 4; \
+99: ba 30f; \
+ sub %o3, n - offset, %o3; \
.section __ex_table,ALLOC; \
.align 4; \
- .word start, 0, end, handler; \
+ .word 98b, 99b; \
.text; \
- .align 4
+ .align 4;
+
+#define STORE_LAST(source, base, offset, n) \
+ EX(std source, [base - offset - n], \
+ add %o1, offset + n);
/* Please don't change these macros, unless you change the logic
* in the .fixup section below as well.
* Store 64 bytes at (BASE + OFFSET) using value SOURCE. */
-#define ZERO_BIG_BLOCK(base, offset, source) \
- std source, [base + offset + 0x00]; \
- std source, [base + offset + 0x08]; \
- std source, [base + offset + 0x10]; \
- std source, [base + offset + 0x18]; \
- std source, [base + offset + 0x20]; \
- std source, [base + offset + 0x28]; \
- std source, [base + offset + 0x30]; \
- std source, [base + offset + 0x38];
+#define ZERO_BIG_BLOCK(base, offset, source) \
+ STORE(source, base, offset, 0x00); \
+ STORE(source, base, offset, 0x08); \
+ STORE(source, base, offset, 0x10); \
+ STORE(source, base, offset, 0x18); \
+ STORE(source, base, offset, 0x20); \
+ STORE(source, base, offset, 0x28); \
+ STORE(source, base, offset, 0x30); \
+ STORE(source, base, offset, 0x38);
#define ZERO_LAST_BLOCKS(base, offset, source) \
- std source, [base - offset - 0x38]; \
- std source, [base - offset - 0x30]; \
- std source, [base - offset - 0x28]; \
- std source, [base - offset - 0x20]; \
- std source, [base - offset - 0x18]; \
- std source, [base - offset - 0x10]; \
- std source, [base - offset - 0x08]; \
- std source, [base - offset - 0x00];
+ STORE_LAST(source, base, offset, 0x38); \
+ STORE_LAST(source, base, offset, 0x30); \
+ STORE_LAST(source, base, offset, 0x28); \
+ STORE_LAST(source, base, offset, 0x20); \
+ STORE_LAST(source, base, offset, 0x18); \
+ STORE_LAST(source, base, offset, 0x10); \
+ STORE_LAST(source, base, offset, 0x08); \
+ STORE_LAST(source, base, offset, 0x00);
.text
.align 4
.globl memset
EXPORT_SYMBOL(__bzero)
EXPORT_SYMBOL(memset)
- .globl __memset_start, __memset_end
-__memset_start:
memset:
mov %o0, %g1
mov 1, %g4
ZERO_BIG_BLOCK(%o0, 0x00, %g2)
subcc %o3, 128, %o3
ZERO_BIG_BLOCK(%o0, 0x40, %g2)
-11:
- EXT(10b, 11b, 20f)
bne 10b
add %o0, 128, %o0
jmp %o4
add %o0, %o2, %o0
-12:
ZERO_LAST_BLOCKS(%o0, 0x48, %g2)
ZERO_LAST_BLOCKS(%o0, 0x08, %g2)
13:
- EXT(12b, 13b, 21f)
be 8f
andcc %o1, 4, %g0
5:
retl
clr %o0
-__memset_end:
.section .fixup,#alloc,#execinstr
.align 4
-20:
- cmp %g2, 8
- bleu 1f
- and %o1, 0x7f, %o1
- sub %g2, 9, %g2
- add %o3, 64, %o3
-1:
- sll %g2, 3, %g2
- add %o3, %o1, %o0
- b 30f
- sub %o0, %g2, %o0
-21:
- mov 8, %o0
- and %o1, 7, %o1
- sub %o0, %g2, %o0
- sll %o0, 3, %o0
- b 30f
- add %o0, %o1, %o0
30:
-/* %o4 is faulting address, %o5 is %pc where fault occurred */
- save %sp, -104, %sp
- mov %i5, %o0
- mov %i7, %o1
- call lookup_fault
- mov %i4, %o2
- ret
- restore
+ and %o1, 0x7f, %o1
+ retl
+ add %o3, %o1, %o0
.globl __bzero_end
__bzero_end:
obj-$(CONFIG_SPARC64) += ultra.o tlb.o tsb.o
obj-y += fault_$(BITS).o
obj-y += init_$(BITS).o
-obj-$(CONFIG_SPARC32) += extable.o srmmu.o iommu.o io-unit.o
+obj-$(CONFIG_SPARC32) += srmmu.o iommu.o io-unit.o
obj-$(CONFIG_SPARC32) += srmmu_access.o
obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o
obj-$(CONFIG_SPARC32) += leon_mm.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sparc/mm/extable.c
- */
-
-#include <linux/module.h>
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-void sort_extable(struct exception_table_entry *start,
- struct exception_table_entry *finish)
-{
-}
-
-/* Caller knows they are in a range if ret->fixup == 0 */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *base,
- const size_t num,
- unsigned long value)
-{
- int i;
-
- /* Single insn entries are encoded as:
- * word 1: insn address
- * word 2: fixup code address
- *
- * Range entries are encoded as:
- * word 1: first insn address
- * word 2: 0
- * word 3: last insn address + 4 bytes
- * word 4: fixup code address
- *
- * Deleted entries are encoded as:
- * word 1: unused
- * word 2: -1
- *
- * See asm/uaccess.h for more details.
- */
-
- /* 1. Try to find an exact match. */
- for (i = 0; i < num; i++) {
- if (base[i].fixup == 0) {
- /* A range entry, skip both parts. */
- i++;
- continue;
- }
-
- /* A deleted entry; see trim_init_extable */
- if (base[i].fixup == -1)
- continue;
-
- if (base[i].insn == value)
- return &base[i];
- }
-
- /* 2. Try to find a range match. */
- for (i = 0; i < (num - 1); i++) {
- if (base[i].fixup)
- continue;
-
- if (base[i].insn <= value && base[i + 1].insn > value)
- return &base[i];
-
- i++;
- }
-
- return NULL;
-}
-
-#ifdef CONFIG_MODULES
-/* We could memmove them around; easier to mark the trimmed ones. */
-void trim_init_extable(struct module *m)
-{
- unsigned int i;
- bool range;
-
- for (i = 0; i < m->num_exentries; i += range ? 2 : 1) {
- range = m->extable[i].fixup == 0;
-
- if (within_module_init(m->extable[i].insn, m)) {
- m->extable[i].fixup = -1;
- if (range)
- m->extable[i+1].fixup = -1;
- }
- if (range)
- i++;
- }
-}
-#endif /* CONFIG_MODULES */
-
-/* Special extable search, which handles ranges. Returns fixup */
-unsigned long search_extables_range(unsigned long addr, unsigned long *g2)
-{
- const struct exception_table_entry *entry;
-
- entry = search_exception_tables(addr);
- if (!entry)
- return 0;
-
- /* Inside range? Fix g2 and return correct fixup */
- if (!entry->fixup) {
- *g2 = (addr - entry->insn) / 4;
- return (entry + 1)->fixup;
- }
-
- return entry->fixup;
-}
#include <linux/interrupt.h>
#include <linux/kdebug.h>
#include <linux/uaccess.h>
+#include <linux/extable.h>
#include <asm/page.h>
#include <asm/openprom.h>
die_if_kernel("Oops", regs);
}
-asmlinkage int lookup_fault(unsigned long pc, unsigned long ret_pc,
- unsigned long address)
-{
- struct pt_regs regs;
- unsigned long g2;
- unsigned int insn;
- int i;
-
- i = search_extables_range(ret_pc, &g2);
- switch (i) {
- case 3:
- /* load & store will be handled by fixup */
- return 3;
-
- case 1:
- /* store will be handled by fixup, load will bump out */
- /* for _to_ macros */
- insn = *((unsigned int *) pc);
- if ((insn >> 21) & 1)
- return 1;
- break;
-
- case 2:
- /* load will be handled by fixup, store will bump out */
- /* for _from_ macros */
- insn = *((unsigned int *) pc);
- if (!((insn >> 21) & 1) || ((insn>>19)&0x3f) == 15)
- return 2;
- break;
-
- default:
- break;
- }
-
- memset(®s, 0, sizeof(regs));
- regs.pc = pc;
- regs.npc = pc + 4;
- __asm__ __volatile__(
- "rd %%psr, %0\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n" : "=r" (regs.psr));
- unhandled_fault(address, current, ®s);
-
- /* Not reached */
- return 0;
-}
-
static inline void
show_signal_msg(struct pt_regs *regs, int sig, int code,
unsigned long address, struct task_struct *tsk)
struct vm_area_struct *vma;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
- unsigned int fixup;
- unsigned long g2;
int from_user = !(regs->psr & PSR_PS);
int code;
vm_fault_t fault;
/* Is this in ex_table? */
no_context:
- g2 = regs->u_regs[UREG_G2];
if (!from_user) {
- fixup = search_extables_range(regs->pc, &g2);
- /* Values below 10 are reserved for other things */
- if (fixup > 10) {
- extern const unsigned int __memset_start[];
- extern const unsigned int __memset_end[];
+ const struct exception_table_entry *entry;
+ entry = search_exception_tables(regs->pc);
#ifdef DEBUG_EXCEPTIONS
- printk("Exception: PC<%08lx> faddr<%08lx>\n",
- regs->pc, address);
- printk("EX_TABLE: insn<%08lx> fixup<%08x> g2<%08lx>\n",
- regs->pc, fixup, g2);
+ printk("Exception: PC<%08lx> faddr<%08lx>\n",
+ regs->pc, address);
+ printk("EX_TABLE: insn<%08lx> fixup<%08x>\n",
+ regs->pc, entry->fixup);
#endif
- if ((regs->pc >= (unsigned long)__memset_start &&
- regs->pc < (unsigned long)__memset_end)) {
- regs->u_regs[UREG_I4] = address;
- regs->u_regs[UREG_I5] = regs->pc;
- }
- regs->u_regs[UREG_G2] = g2;
- regs->pc = fixup;
- regs->npc = regs->pc + 4;
- return;
- }
+ regs->pc = entry->fixup;
+ regs->npc = regs->pc + 4;
+ return;
}
unhandled_fault(address, tsk, regs);
/* SPDX-License-Identifier: GPL-2.0 */
/* fault_32.c - visible as they are called from assembler */
-asmlinkage int lookup_fault(unsigned long pc, unsigned long ret_pc,
- unsigned long address);
asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
unsigned long address);
}
#endif
-#ifndef ARCH_HAS_SORT_EXTABLE
#ifndef ARCH_HAS_RELATIVE_EXTABLE
#define swap_ex NULL
#else
m->num_exentries--;
}
#endif /* CONFIG_MODULES */
-#endif /* !ARCH_HAS_SORT_EXTABLE */
-
-#ifndef ARCH_HAS_SEARCH_EXTABLE
static int cmp_ex_search(const void *key, const void *elt)
{
return bsearch(&value, base, num,
sizeof(struct exception_table_entry), cmp_ex_search);
}
-#endif
projects / linux-2.6-microblaze.git / commitdiff