ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
authorDan Haab <dan.haab@legrand.com>
Wed, 2 Oct 2019 15:57:26 +0000 (09:57 -0600)
committerFlorian Fainelli <f.fainelli@gmail.com>
Tue, 15 Oct 2019 23:14:11 +0000 (16:14 -0700)
It's a simple network device based on BCM47094 with just a single
Ethernet port.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts [new file with mode: 0644]

index b21b3a6..f6b578d 100644 (file)
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm47094-luxul-abr-4500.dtb \
        bcm47094-luxul-xap-1610.dtb \
        bcm47094-luxul-xbr-4500.dtb \
+       bcm47094-luxul-xwc-2000.dtb \
        bcm47094-luxul-xwr-3100.dtb \
        bcm47094-luxul-xwr-3150-v1.dtb \
        bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
new file mode 100644 (file)
index 0000000..3343253
--- /dev/null
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+       compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+       model = "Luxul XWC-2000 V1";
+
+       chosen {
+               bootargs = "earlycon";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000
+                      0x88000000 0x18000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               status  {
+                       label = "bcm53xx:green:status";
+                       gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "timer";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&spi_nor {
+       status = "okay";
+};