* - ``port_list_is_empty``
- ``drop``
- Traps packets that the device decided to drop in case they need to be
- flooded and the flood list is empty
+ flooded (e.g., unknown unicast, unregistered multicast) and there are
+ no ports the packets should be flooded to
* - ``port_loopback_filter``
- ``drop``
- Traps packets that the device decided to drop in case after layer 2
goto err_port_qdiscs_init;
}
+ err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, 0, VLAN_N_VID - 1, false,
+ false);
+ if (err) {
+ dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to clear VLAN filter\n",
+ mlxsw_sp_port->local_port);
+ goto err_port_vlan_clear;
+ }
+
err = mlxsw_sp_port_nve_init(mlxsw_sp_port);
if (err) {
dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to initialize NVE\n",
err_port_pvid_set:
mlxsw_sp_port_nve_fini(mlxsw_sp_port);
err_port_nve_init:
+err_port_vlan_clear:
mlxsw_sp_tc_qdisc_fini(mlxsw_sp_port);
err_port_qdiscs_init:
mlxsw_sp_port_fids_fini(mlxsw_sp_port);
struct netlink_ext_ack *extack)
{
const struct flow_action_entry *act;
+ int mirror_act_count = 0;
int err, i;
if (!flow_action_has_entries(flow_action))
case FLOW_ACTION_MIRRED: {
struct net_device *out_dev = act->dev;
+ if (mirror_act_count++) {
+ NL_SET_ERR_MSG_MOD(extack, "Multiple mirror actions per rule are not supported");
+ return -EOPNOTSUPP;
+ }
+
err = mlxsw_sp_acl_rulei_act_mirror(mlxsw_sp, rulei,
block, out_dev,
extack);
local vid=10
bridge vlan add vid $vid dev $swp2 master
- # During initialization the firmware enables all the VLAN filters and
- # the driver does not turn them off since the traffic will be discarded
- # by the STP filter whose default is DISCARD state. Add the VID on the
- # ingress bridge port and then remove it to make sure it is not member
- # in the VLAN.
- bridge vlan add vid $vid dev $swp1 master
- bridge vlan del vid $vid dev $swp1 master
RET=0