arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200
authorMichael Walle <mwalle@kernel.org>
Mon, 8 Apr 2024 08:08:16 +0000 (10:08 +0200)
committerAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Thu, 27 Jun 2024 08:10:22 +0000 (10:10 +0200)
Add basic support for the Kontron 3.5" single board computer featuring a
Mediatek i1200 SoC (MT8395/MT8195).

Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240408080816.4134370-2-mwalle@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arch/arm64/boot/dts/mediatek/Makefile
arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts [new file with mode: 0644]

index 3542e42..12f6795 100644 (file)
@@ -79,5 +79,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
new file mode 100644 (file)
index 0000000..e4b2af9
--- /dev/null
@@ -0,0 +1,1127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Kontron Europe GmbH
+ *
+ * Author: Michael Walle <mwalle@kernel.org>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+       model = "Kontron 3.5\"-SBC-i1200";
+       compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195";
+
+       aliases {
+               mmc0 = &mmc0;
+               mmc1 = &mmc1;
+               serial0 = &uart1;
+               serial1 = &uart2;
+               serial2 = &uart3;
+               serial3 = &uart4;
+               serial4 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       firmware {
+               optee {
+                       compatible = "linaro,optee-tz";
+                       method = "smc";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpio_keys_pins>;
+
+               key-0 {
+                       gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+                       label = "volume_up";
+                       linux,code = <KEY_VOLUMEUP>;
+                       wakeup-source;
+                       debounce-interval = <15>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins>;
+
+               led-0 {
+                       gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
+               };
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               reg = <0 0x40000000 0x0 0x80000000>;
+       };
+
+       vsys: regulator-vsys {
+               compatible = "regulator-fixed";
+               regulator-name = "vsys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               /*
+                * 12 MiB reserved for OP-TEE (BL32)
+                * +-----------------------+ 0x43e0_0000
+                * |      SHMEM 2MiB       |
+                * +-----------------------+ 0x43c0_0000
+                * |        | TA_RAM  8MiB |
+                * + TZDRAM +--------------+ 0x4340_0000
+                * |        | TEE_RAM 2MiB |
+                * +-----------------------+ 0x4320_0000
+                */
+               optee_reserved: optee@43200000 {
+                       no-map;
+                       reg = <0 0x43200000 0 0x00c00000>;
+               };
+
+               scp_mem: memory@50000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x50000000 0 0x2900000>;
+                       no-map;
+               };
+
+               vpu_mem: memory@53000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+               };
+
+               /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+               bl31_secmon_mem: memory@54600000 {
+                       no-map;
+                       reg = <0 0x54600000 0x0 0x200000>;
+               };
+
+               snd_dma_mem: memory@60000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x60000000 0 0x1100000>;
+                       no-map;
+               };
+
+               apu_mem: memory@62000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+               };
+       };
+
+       thermal_sensor0: thermal-sensor-0 {
+               compatible = "generic-adc-thermal";
+               #thermal-sensor-cells = <0>;
+               io-channels = <&auxadc 0>;
+               io-channel-names = "sensor-channel";
+               temperature-lookup-table = <(-25000) 1474
+                                           (-20000) 1374
+                                           (-15000) 1260
+                                           (-10000) 1134
+                                            (-5000) 1004
+                                                  0 874
+                                               5000 750
+                                              10000 635
+                                              15000 532
+                                              20000 443
+                                              25000 367
+                                              30000 303
+                                              35000 250
+                                              40000 206
+                                              45000 170
+                                              50000 141
+                                              55000 117
+                                              60000 97
+                                              65000 81
+                                              70000 68
+                                              75000 57
+                                              80000 48
+                                              85000 41
+                                              90000 35
+                                              95000 30
+                                             100000 25
+                                             105000 22
+                                             110000 19
+                                             115000 16
+                                             120000 14
+                                             125000 12
+                                             130000 10
+                                             135000 9
+                                             140000 8
+                                             145000 7
+                                             150000 6>;
+       };
+
+       thermal_sensor1: thermal-sensor-1 {
+               compatible = "generic-adc-thermal";
+               #thermal-sensor-cells = <0>;
+               io-channels = <&auxadc 1>;
+               io-channel-names = "sensor-channel";
+               temperature-lookup-table = <(-25000) 1474
+                                           (-20000) 1374
+                                           (-15000) 1260
+                                           (-10000) 1134
+                                            (-5000) 1004
+                                                  0 874
+                                               5000 750
+                                              10000 635
+                                              15000 532
+                                              20000 443
+                                              25000 367
+                                              30000 303
+                                              35000 250
+                                              40000 206
+                                              45000 170
+                                              50000 141
+                                              55000 117
+                                              60000 97
+                                              65000 81
+                                              70000 68
+                                              75000 57
+                                              80000 48
+                                              85000 41
+                                              90000 35
+                                              95000 30
+                                             100000 25
+                                             105000 22
+                                             110000 19
+                                             115000 16
+                                             120000 14
+                                             125000 12
+                                             130000 10
+                                             135000 9
+                                             140000 8
+                                             145000 7
+                                             150000 6>;
+       };
+
+       thermal_sensor2: thermal-sensor-2 {
+               compatible = "generic-adc-thermal";
+               #thermal-sensor-cells = <0>;
+               io-channels = <&auxadc 2>;
+               io-channel-names = "sensor-channel";
+               temperature-lookup-table = <(-25000) 1474
+                                           (-20000) 1374
+                                           (-15000) 1260
+                                           (-10000) 1134
+                                            (-5000) 1004
+                                                  0 874
+                                               5000 750
+                                              10000 635
+                                              15000 532
+                                              20000 443
+                                              25000 367
+                                              30000 303
+                                              35000 250
+                                              40000 206
+                                              45000 170
+                                              50000 141
+                                              55000 117
+                                              60000 97
+                                              65000 81
+                                              70000 68
+                                              75000 57
+                                              80000 48
+                                              85000 41
+                                              90000 35
+                                              95000 30
+                                             100000 25
+                                             105000 22
+                                             110000 19
+                                             115000 16
+                                             120000 14
+                                             125000 12
+                                             130000 10
+                                             135000 9
+                                             140000 8
+                                             145000 7
+                                             150000 6>;
+       };
+};
+
+&auxadc {
+       status = "okay";
+};
+
+&eth {
+       phy-mode ="rgmii-id";
+       phy-handle = <&ethernet_phy0>;
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&eth_default_pins>;
+       pinctrl-1 = <&eth_sleep_pins>;
+       status = "okay";
+
+       mdio {
+               ethernet_phy0: ethernet-phy@1 {
+                       compatible = "ethernet-phy-id001c.c916";
+                       reg = <0x1>;
+                       interrupts-extended = <&pio 94 IRQ_TYPE_LEVEL_LOW>;
+                       reset-assert-us = <10000>;
+                       reset-deassert-us = <80000>;
+                       reset-gpios = <&pio 93 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpu {
+       status = "okay";
+       mali-supply = <&mt6315_7_vbuck1>;
+};
+
+/* CSI1/CSI2 connector */
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+       clock-frequency = <100000>;
+       status = "okay";
+};
+
+/* CSI3 connector */
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+       clock-frequency = <100000>;
+       status = "okay";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c2_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+
+       /* LVDS bridge @f */
+};
+
+/* Touch panel connector */
+&i2c3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c3_pins>;
+       clock-frequency = <100000>;
+       status = "okay";
+};
+
+/* B2B connector */
+&i2c4 {
+       clock-frequency = <100000>;
+       pinctrl-0 = <&i2c4_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&i2c6 {
+       clock-frequency = <400000>;
+       pinctrl-0 = <&i2c6_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       mt6360: pmic@34 {
+               compatible = "mediatek,mt6360";
+               reg = <0x34>;
+               interrupt-controller;
+               interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+               interrupt-names = "IRQB";
+               #interrupt-cells = <1>;
+
+               regulator {
+                       compatible = "mediatek,mt6360-regulator";
+                       LDO_VIN1-supply = <&vsys>;
+                       LDO_VIN2-supply = <&vsys>;
+                       LDO_VIN3-supply = <&vsys>;
+
+                       mt6360_buck1: BUCK1 {
+                               regulator-name = "emi_vdd2";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP
+                                                          MT6360_OPMODE_ULP>;
+                               regulator-always-on;
+                       };
+
+                       mt6360_buck2: BUCK2 {
+                               regulator-name = "emi_vddq";
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP
+                                                          MT6360_OPMODE_ULP>;
+                               regulator-always-on;
+                       };
+
+                       mt6360_ldo1: LDO1 {
+                               regulator-name = "mt6360_ldo1"; /* Test point */
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3600000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                       };
+
+                       mt6360_ldo2: LDO2 {
+                               regulator-name = "panel1_p1v8";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                       };
+
+                       mt6360_ldo3: LDO3 {
+                               regulator-name = "vmc_pmu";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                       };
+
+                       mt6360_ldo5: LDO5 {
+                               regulator-name = "vmch_pmu";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                       };
+
+                       mt6360_ldo6: LDO6 {
+                               regulator-name = "mt6360_ldo6"; /* Test point */
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <2100000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                       };
+
+                       mt6360_ldo7: LDO7 {
+                               regulator-name = "emi_vmddr_en";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                                                          MT6360_OPMODE_LP>;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc0_default_pins>;
+       pinctrl-1 = <&mmc0_uhs_pins>;
+       bus-width = <8>;
+       max-frequency = <200000000>;
+       hs400-ds-delay = <0x14c11>;
+       cap-mmc-highspeed;
+       cap-mmc-hw-reset;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+       no-sdio;
+       no-sd;
+       non-removable;
+       vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+       vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc1_default_pins>, <&mmc1_detect_pins>;
+       pinctrl-1 = <&mmc1_default_pins>;
+       cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+       bus-width = <4>;
+       max-frequency = <200000000>;
+       cap-sd-highspeed;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+       no-mmc;
+       vmmc-supply = <&mt6360_ldo5>;
+       vqmmc-supply = <&mt6360_ldo3>;
+       status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+       regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+       regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+       regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+       regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+       regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+       regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+       regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+       regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+       regulator-always-on;
+};
+
+&nor_flash {
+       pinctrl-names = "default";
+       pinctrl-0 = <&nor_pins_default>;
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <52000000>;
+               spi-rx-bus-width = <2>;
+               spi-tx-bus-width = <2>;
+       };
+};
+
+&pcie0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie0_pins_default>;
+       status = "okay";
+};
+
+&pcie1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie1_pins_default>;
+       status = "okay";
+};
+
+&pciephy {
+       status = "okay";
+};
+
+&pio {
+       eth_default_pins: eth-default-pins {
+               pins-txd {
+                       pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+                                <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+                                <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+                                <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+                       drive-strength = <8>;
+               };
+
+               pins-rxd {
+                       pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+                                <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+                                <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+                                <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+               };
+
+               pins-cc {
+                       pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+                                <PINMUX_GPIO86__FUNC_GBE_RXC>,
+                                <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+                                <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+                       drive-strength = <8>;
+               };
+
+               pins-mdio {
+                       pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+                                <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+                       input-enable;
+               };
+
+               pins-power {
+                       pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+                                <PINMUX_GPIO92__FUNC_GPIO92>;
+                       output-high;
+               };
+
+               pins-reset {
+                       pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+                       output-high;
+               };
+
+               pins-interrupt {
+                       pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+                       input-enable;
+               };
+       };
+
+       eth_sleep_pins: eth-sleep-pins {
+               pins-txd {
+                       pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+                                <PINMUX_GPIO78__FUNC_GPIO78>,
+                                <PINMUX_GPIO79__FUNC_GPIO79>,
+                                <PINMUX_GPIO80__FUNC_GPIO80>;
+               };
+
+               pins-cc {
+                       pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+                                <PINMUX_GPIO88__FUNC_GPIO88>,
+                                <PINMUX_GPIO87__FUNC_GPIO87>,
+                                <PINMUX_GPIO86__FUNC_GPIO86>;
+               };
+
+               pins-rxd {
+                       pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+                                <PINMUX_GPIO82__FUNC_GPIO82>,
+                                <PINMUX_GPIO83__FUNC_GPIO83>,
+                                <PINMUX_GPIO84__FUNC_GPIO84>;
+               };
+
+               pins-mdio {
+                       pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+                                <PINMUX_GPIO90__FUNC_GPIO90>;
+                       input-disable;
+                       bias-disable;
+               };
+       };
+
+       gpio_keys_pins: gpio-keys-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+                       input-enable;
+               };
+       };
+
+       i2c0_pins: i2c0-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+                                <PINMUX_GPIO9__FUNC_SCL0>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c1_pins: i2c1-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+                                <PINMUX_GPIO11__FUNC_SCL1>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c2_pins: i2c2-default-pins {
+               pins-bus {
+                       pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+                                <PINMUX_GPIO13__FUNC_SCL2>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c3_pins: i2c3-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+                                <PINMUX_GPIO15__FUNC_SCL3>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c4_pins: i2c4-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+                                <PINMUX_GPIO17__FUNC_SCL4>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c6_pins: i2c6-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+                                <PINMUX_GPIO26__FUNC_SCL6>;
+                       bias-pull-up;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       mmc0_default_pins: mmc0-default-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+                       drive-strength = <6>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+                                <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+                                <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+                                <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+                                <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+                                <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+                                <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+                                <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+                                <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-rst {
+                       pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc0_uhs_pins: mmc0-uhs-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+                       drive-strength = <8>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+                                <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+                                <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+                                <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+                                <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+                                <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+                                <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+                                <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+                                <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+                       input-enable;
+                       drive-strength = <8>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-ds {
+                       pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+                       drive-strength = <8>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-rst {
+                       pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+                       drive-strength = <8>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc1_default_pins: mmc1-default-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+                       drive-strength = <8>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+                                <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+                                <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+                                <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+                                <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+                       input-enable;
+                       drive-strength = <8>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc1_detect_pins: mmc1-detect-pins {
+               pins-insert {
+                       pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+                       bias-pull-up;
+               };
+       };
+
+       nor_pins_default: nor-default-pins {
+               pins-ck-io {
+                       pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+                                <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+                                <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+                       drive-strength = <6>;
+                       bias-pull-down;
+               };
+
+               pins-cs {
+                       pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+                       drive-strength = <6>;
+                       bias-pull-up;
+               };
+       };
+
+       pcie0_pins_default: pcie0-default-pins {
+               pins-bus {
+                       pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+                                <PINMUX_GPIO20__FUNC_PERSTN>,
+                                <PINMUX_GPIO21__FUNC_CLKREQN>;
+                       bias-pull-up;
+               };
+       };
+
+       pcie1_pins_default: pcie1-default-pins {
+               pins-bus {
+                       pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+                                <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+                                <PINMUX_GPIO2__FUNC_WAKEN_1>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       led_pins: led-pins {
+               pins-power-en {
+                       pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+                       output-high;
+               };
+       };
+
+       spi0_pins: spi0-default-pins {
+               pins-cs-mosi-clk {
+                       pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+                                <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+                                <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+                       bias-disable;
+               };
+
+               pins-miso {
+                       pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+                       bias-pull-down;
+               };
+       };
+
+       spi1_pins: spi1-default-pins {
+               pins-cs-mosi-clk {
+                       pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+                                <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+                                <PINMUX_GPIO137__FUNC_SPIM1_CLK>;
+                       bias-disable;
+               };
+
+               pins-miso {
+                       pinmux = <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+                       bias-pull-down;
+               };
+       };
+
+       uart0_pins: uart0-pins {
+               pins-rx {
+                       pinmux = <PINMUX_GPIO99__FUNC_URXD0>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins-tx {
+                       pinmux = <PINMUX_GPIO98__FUNC_UTXD0>;
+               };
+       };
+
+       uart1_pins: uart1-pins {
+               pins-rx {
+                       pinmux = <PINMUX_GPIO103__FUNC_URXD1>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins-tx {
+                       pinmux = <PINMUX_GPIO102__FUNC_UTXD1>;
+               };
+
+               pins-rts {
+                       pinmux = <PINMUX_GPIO100__FUNC_URTS1>;
+               };
+
+               pins-cts {
+                       pinmux = <PINMUX_GPIO101__FUNC_UCTS1>;
+                       input-enable;
+               };
+       };
+
+       uart2_pins: uart2-pins {
+               pins-rx {
+                       pinmux = <PINMUX_GPIO68__FUNC_URXD2>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins-tx {
+                       pinmux = <PINMUX_GPIO67__FUNC_UTXD2>;
+               };
+
+               pins-rts {
+                       pinmux = <PINMUX_GPIO66__FUNC_URTS2>;
+               };
+
+               pins-cts {
+                       pinmux = <PINMUX_GPIO65__FUNC_UCTS2>;
+                       input-enable;
+               };
+       };
+
+       uart3_pins: uart3-pins {
+               pins-rx {
+                       pinmux = <PINMUX_GPIO5__FUNC_URXD3>;
+                       input-enable;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-tx {
+                       pinmux = <PINMUX_GPIO4__FUNC_UTXD3>;
+               };
+       };
+
+       uart4_pins: uart4-pins {
+               pins-rx {
+                       pinmux = <PINMUX_GPIO7__FUNC_URXD4>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins-tx {
+                       pinmux = <PINMUX_GPIO6__FUNC_UTXD4>;
+               };
+       };
+};
+
+&pmic {
+       interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+       memory-region = <&scp_mem>;
+       firmware-name = "mediatek/mt8195/scp.img";
+       status = "okay";
+};
+
+&spmi {
+       #address-cells = <2>;
+       #size-cells = <0>;
+
+       mt6315@6 {
+               compatible = "mediatek,mt6315-regulator";
+               reg = <0x6 SPMI_USID>;
+
+               regulators {
+                       mt6315_6_vbuck1: vbuck1 {
+                               regulator-name = "Vbcpu";
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1193750>;
+                               regulator-enable-ramp-delay = <256>;
+                               regulator-ramp-delay = <6250>;
+                               regulator-allowed-modes = <0 1 2>;
+                               regulator-always-on;
+                       };
+               };
+       };
+
+       mt6315@7 {
+               compatible = "mediatek,mt6315-regulator";
+               reg = <0x7 SPMI_USID>;
+
+               regulators {
+                       mt6315_7_vbuck1: vbuck1 {
+                               regulator-name = "Vgpu";
+                               regulator-min-microvolt = <625000>;
+                               regulator-max-microvolt = <1193750>;
+                               regulator-enable-ramp-delay = <256>;
+                               regulator-ramp-delay = <6250>;
+                               regulator-allowed-modes = <0 1 2>;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+/* USB3.2 front port */
+&ssusb0 {
+       dr_mode = "host";
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&ssusb2 {
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&ssusb3 {
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       status = "okay";
+};
+
+&spi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi0_pins>;
+       mediatek,pad-select = <0>;
+       status = "okay";
+
+       tpm: tpm@0 {
+               compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+               reg = <0>;
+               spi-max-frequency = <18500000>;
+       };
+};
+
+/* B2B connector */
+&spi1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi1_pins>;
+       mediatek,pad-select = <0>;
+       status = "okay";
+};
+
+&thermal_zones {
+       cpu-thermal {
+               polling-delay = <1000>; /* milliseconds */
+               polling-delay-passive = <0>; /* milliseconds */
+               thermal-sensors = <&thermal_sensor0>;
+
+               trips {
+                       trip-alert {
+                               temperature = <85000>;
+                               hysteresis = <2000>;
+                               type = "passive";
+                       };
+
+                       trip-crit {
+                               temperature = <95000>;
+                               hysteresis = <2000>;
+                               type = "critical";
+                       };
+               };
+       };
+
+       pcb-top-thermal {
+               polling-delay = <1000>; /* milliseconds */
+               polling-delay-passive = <0>; /* milliseconds */
+               thermal-sensors = <&thermal_sensor1>;
+
+               trips {
+                       trip-alert {
+                               temperature = <75000>;
+                               hysteresis = <2000>;
+                               type = "passive";
+                       };
+
+                       trip-crit {
+                               temperature = <85000>;
+                               hysteresis = <2000>;
+                               type = "critical";
+                       };
+               };
+       };
+
+       pcb-bottom-thermal {
+               polling-delay = <1000>; /* milliseconds */
+               polling-delay-passive = <0>; /* milliseconds */
+               thermal-sensors = <&thermal_sensor2>;
+
+               trips {
+                       trip-alert {
+                               temperature = <75000>;
+                               hysteresis = <2000>;
+                               type = "passive";
+                       };
+
+                       trip-crit {
+                               temperature = <85000>;
+                               hysteresis = <2000>;
+                               type = "critical";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+       uart-has-rtscts;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+       uart-has-rtscts;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+       status = "okay";
+};
+
+&uart4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart4_pins>;
+       status = "okay";
+};
+
+/* USB3 */
+&u3phy0 {
+       status = "okay";
+};
+
+/* PCIe1/USB2 */
+&u3phy1 {
+       status = "okay";
+};
+
+/* USB2 */
+&u3phy2 {
+       status = "okay";
+};
+
+/* USB2 */
+&u3phy3 {
+       status = "okay";
+};
+
+/* USB3.2 front port */
+&xhci0 {
+       status = "okay";
+};
+
+/* USB2.0 M.2 Key-B */
+&xhci1 {
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       mediatek,u3p-dis-msk = <0x01>;
+       status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&xhci2 {
+       status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&xhci3 {
+       status = "okay";
+};