[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.

Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8db9c70..8da05f9 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,7 +45,7 @@
 #include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 8250551..836c9f6 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -40,7 +40,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>

diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index b08f18c..80208d3 100644 (file)
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -32,7 +32,7 @@
 
 #include <plat/regs-serial.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
 
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>

diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
new file mode 100644 (file)
index 0000000..5106aca
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-s3c2410/include/mach/iic.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - I2C Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER      (1<<0)  /* enable s3c2440 filter */
+
+/* Notes:
+ *     1) All frequencies are expressed in Hz
+ *     2) A value of zero is `do not care`
+*/
+
+struct s3c2410_platform_i2c {
+       int             bus_num;        /* bus number to use */
+       unsigned int    flags;
+       unsigned int    slave_addr;     /* slave address for controller */
+       unsigned long   bus_freq;       /* standard bus frequency */
+       unsigned long   max_freq;       /* max frequency for the bus */
+       unsigned long   min_freq;       /* min frequency for the bus */
+       unsigned int    sda_delay;      /* pclks (s3c2440 only) */
+};
+
+#endif /* __ASM_ARCH_IIC_H */

diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-s3c/include/plat/regs-iic.h
new file mode 100644 (file)
index 0000000..2f7c17d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-iic.h
@@ -0,0 +1,56 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *             http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 I2C Controller
+*/
+
+#ifndef __ASM_ARCH_REGS_IIC_H
+#define __ASM_ARCH_REGS_IIC_H __FILE__
+
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC    S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN           (1<<7)
+#define S3C2410_IICCON_TXDIV_16                (0<<6)
+#define S3C2410_IICCON_TXDIV_512       (1<<6)
+#define S3C2410_IICCON_IRQEN           (1<<5)
+#define S3C2410_IICCON_IRQPEND         (1<<4)
+#define S3C2410_IICCON_SCALE(x)                ((x)&15)
+#define S3C2410_IICCON_SCALEMASK       (0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX      (2<<6)
+#define S3C2410_IICSTAT_MASTER_TX      (3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX       (0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX       (1<<6)
+#define S3C2410_IICSTAT_MODEMASK       (3<<6)
+
+#define S3C2410_IICSTAT_START          (1<<5)
+#define S3C2410_IICSTAT_BUSBUSY                (1<<5)
+#define S3C2410_IICSTAT_TXRXEN         (1<<4)
+#define S3C2410_IICSTAT_ARBITR         (1<<3)
+#define S3C2410_IICSTAT_ASSLAVE                (1<<2)
+#define S3C2410_IICSTAT_ADDR0          (1<<1)
+#define S3C2410_IICSTAT_LASTBIT                (1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0       (0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5       (1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10      (2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15      (3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK   (3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON                (1<<2)
+
+#endif /* __ASM_ARCH_REGS_IIC_H */

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index c772e02..4ad9c47 100644 (file)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -40,8 +40,8 @@
 #include <asm/io.h>
 
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-iic.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
 
 /* i2c controller state */
 

diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
deleted file mode 100644 (file)
index 5106aca..0000000
--- a/include/asm-arm/plat-s3c/iic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *     Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - I2C Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER      (1<<0)  /* enable s3c2440 filter */
-
-/* Notes:
- *     1) All frequencies are expressed in Hz
- *     2) A value of zero is `do not care`
-*/
-
-struct s3c2410_platform_i2c {
-       int             bus_num;        /* bus number to use */
-       unsigned int    flags;
-       unsigned int    slave_addr;     /* slave address for controller */
-       unsigned long   bus_freq;       /* standard bus frequency */
-       unsigned long   max_freq;       /* max frequency for the bus */
-       unsigned long   min_freq;       /* min frequency for the bus */
-       unsigned int    sda_delay;      /* pclks (s3c2440 only) */
-};
-
-#endif /* __ASM_ARCH_IIC_H */

diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
deleted file mode 100644 (file)
index 2f7c17d..0000000
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *             http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC    S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN           (1<<7)
-#define S3C2410_IICCON_TXDIV_16                (0<<6)
-#define S3C2410_IICCON_TXDIV_512       (1<<6)
-#define S3C2410_IICCON_IRQEN           (1<<5)
-#define S3C2410_IICCON_IRQPEND         (1<<4)
-#define S3C2410_IICCON_SCALE(x)                ((x)&15)
-#define S3C2410_IICCON_SCALEMASK       (0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX      (2<<6)
-#define S3C2410_IICSTAT_MASTER_TX      (3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX       (0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX       (1<<6)
-#define S3C2410_IICSTAT_MODEMASK       (3<<6)
-
-#define S3C2410_IICSTAT_START          (1<<5)
-#define S3C2410_IICSTAT_BUSBUSY                (1<<5)
-#define S3C2410_IICSTAT_TXRXEN         (1<<4)
-#define S3C2410_IICSTAT_ARBITR         (1<<3)
-#define S3C2410_IICSTAT_ASSLAVE                (1<<2)
-#define S3C2410_IICSTAT_ADDR0          (1<<1)
-#define S3C2410_IICSTAT_LASTBIT                (1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0       (0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5       (1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10      (2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15      (3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK   (3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON                (1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */