}
/*
- * Reads the value from a PHY register
- * hw - Struct containing variables accessed by shared code
- * reg_addr - address of the PHY register to read
+ * wait mdio module be idle
+ * return true: idle
+ * false: still busy
*/
-int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+bool atl1c_wait_mdio_idle(struct atl1c_hw *hw)
{
u32 val;
int i;
- val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
- MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
- MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+ for (i = 0; i < MDIO_MAX_AC_TO; i++) {
+ AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+ if (!(val & (MDIO_CTRL_BUSY | MDIO_CTRL_START)))
+ break;
+ udelay(10);
+ }
+
+ return i != MDIO_MAX_AC_TO;
+}
+
+void atl1c_stop_phy_polling(struct atl1c_hw *hw)
+{
+ if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
+ return;
+
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, 0);
+ atl1c_wait_mdio_idle(hw);
+}
+
+void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel)
+{
+ u32 val;
+ if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
+ return;
+
+ val = MDIO_CTRL_SPRES_PRMBL |
+ FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) |
+ FIELDX(MDIO_CTRL_REG, 1) |
+ MDIO_CTRL_START |
+ MDIO_CTRL_OP_READ;
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+ atl1c_wait_mdio_idle(hw);
+ val |= MDIO_CTRL_AP_EN;
+ val &= ~MDIO_CTRL_START;
AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+ udelay(30);
+}
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- AT_READ_REG(hw, REG_MDIO_CTRL, &val);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
+
+/*
+ * atl1c_read_phy_core
+ * core funtion to read register in PHY via MDIO control regsiter.
+ * ext: extension register (see IEEE 802.3)
+ * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
+ * reg: reg to read
+ */
+int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
+ u16 reg, u16 *phy_data)
+{
+ u32 val;
+ u16 clk_sel = MDIO_CTRL_CLK_25_4;
+
+ atl1c_stop_phy_polling(hw);
+
+ *phy_data = 0;
+
+ /* only l2c_b2 & l1d_2 could use slow clock */
+ if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) &&
+ hw->hibernate)
+ clk_sel = MDIO_CTRL_CLK_25_128;
+ if (ext) {
+ val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg);
+ AT_WRITE_REG(hw, REG_MDIO_EXTN, val);
+ val = MDIO_CTRL_SPRES_PRMBL |
+ FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) |
+ MDIO_CTRL_START |
+ MDIO_CTRL_MODE_EXT |
+ MDIO_CTRL_OP_READ;
+ } else {
+ val = MDIO_CTRL_SPRES_PRMBL |
+ FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) |
+ FIELDX(MDIO_CTRL_REG, reg) |
+ MDIO_CTRL_START |
+ MDIO_CTRL_OP_READ;
}
- if (!(val & (MDIO_START | MDIO_BUSY))) {
- *phy_data = (u16)val;
- return 0;
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+ if (!atl1c_wait_mdio_idle(hw))
+ return -1;
+
+ AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+ *phy_data = (u16)FIELD_GETX(val, MDIO_CTRL_DATA);
+
+ atl1c_start_phy_polling(hw, clk_sel);
+
+ return 0;
+}
+
+/*
+ * atl1c_write_phy_core
+ * core funtion to write to register in PHY via MDIO control regsiter.
+ * ext: extension register (see IEEE 802.3)
+ * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
+ * reg: reg to write
+ */
+int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
+ u16 reg, u16 phy_data)
+{
+ u32 val;
+ u16 clk_sel = MDIO_CTRL_CLK_25_4;
+
+ atl1c_stop_phy_polling(hw);
+
+
+ /* only l2c_b2 & l1d_2 could use slow clock */
+ if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) &&
+ hw->hibernate)
+ clk_sel = MDIO_CTRL_CLK_25_128;
+
+ if (ext) {
+ val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg);
+ AT_WRITE_REG(hw, REG_MDIO_EXTN, val);
+ val = MDIO_CTRL_SPRES_PRMBL |
+ FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) |
+ FIELDX(MDIO_CTRL_DATA, phy_data) |
+ MDIO_CTRL_START |
+ MDIO_CTRL_MODE_EXT;
+ } else {
+ val = MDIO_CTRL_SPRES_PRMBL |
+ FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) |
+ FIELDX(MDIO_CTRL_DATA, phy_data) |
+ FIELDX(MDIO_CTRL_REG, reg) |
+ MDIO_CTRL_START;
}
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
- return -1;
+ if (!atl1c_wait_mdio_idle(hw))
+ return -1;
+
+ atl1c_start_phy_polling(hw, clk_sel);
+
+ return 0;
+}
+
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ return atl1c_read_phy_core(hw, false, 0, reg_addr, phy_data);
}
/*
*/
int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data)
{
- int i;
- u32 val;
-
- val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
- (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
- MDIO_SUP_PREAMBLE | MDIO_START |
- MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
-
- AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
-
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- AT_READ_REG(hw, REG_MDIO_CTRL, &val);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
+ return atl1c_write_phy_core(hw, false, 0, reg_addr, phy_data);
+}
- if (!(val & (MDIO_START | MDIO_BUSY)))
- return 0;
+/* read from PHY extension register */
+int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
+ u16 reg_addr, u16 *phy_data)
+{
+ return atl1c_read_phy_core(hw, true, dev_addr, reg_addr, phy_data);
+}
- return -1;
+/* write to PHY extension register */
+int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
+ u16 reg_addr, u16 phy_data)
+{
+ return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data);
}
/*
int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
int atl1c_restart_autoneg(struct atl1c_hw *hw);
int atl1c_phy_power_saving(struct atl1c_hw *hw);
+bool atl1c_wait_mdio_idle(struct atl1c_hw *hw);
+void atl1c_stop_phy_polling(struct atl1c_hw *hw);
+void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel);
+int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
+ u16 reg, u16 *phy_data);
+int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
+ u16 reg, u16 phy_data);
+int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
+ u16 reg_addr, u16 *phy_data);
+int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
+ u16 reg_addr, u16 phy_data);
/* register definition */
#define REG_DEVICE_CAP 0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
/* MDIO Control Register */
#define REG_MDIO_CTRL 0x1414
-#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit
- * control data to write to PHY
- * MII management register */
-#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit
- * status data that was read
- * from the PHY MII management register */
-#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */
-#define MDIO_REG_ADDR_SHIFT 16
-#define MDIO_RW 0x200000 /* 1: read, 0: write */
-#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */
-#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO
- * master. And this bit is self
- * cleared after one cycle */
-#define MDIO_CLK_SEL_SHIFT 24
-#define MDIO_CLK_25_4 0
-#define MDIO_CLK_25_6 2
-#define MDIO_CLK_25_8 3
-#define MDIO_CLK_25_10 4
-#define MDIO_CLK_25_14 5
-#define MDIO_CLK_25_20 6
-#define MDIO_CLK_25_28 7
-#define MDIO_BUSY 0x8000000
-#define MDIO_AP_EN 0x10000000
-#define MDIO_WAIT_TIMES 10
+#define MDIO_CTRL_MODE_EXT BIT(30)
+#define MDIO_CTRL_POST_READ BIT(29)
+#define MDIO_CTRL_AP_EN BIT(28)
+#define MDIO_CTRL_BUSY BIT(27)
+#define MDIO_CTRL_CLK_SEL_MASK 0x7UL
+#define MDIO_CTRL_CLK_SEL_SHIFT 24
+#define MDIO_CTRL_CLK_25_4 0 /* 25MHz divide 4 */
+#define MDIO_CTRL_CLK_25_6 2
+#define MDIO_CTRL_CLK_25_8 3
+#define MDIO_CTRL_CLK_25_10 4
+#define MDIO_CTRL_CLK_25_32 5
+#define MDIO_CTRL_CLK_25_64 6
+#define MDIO_CTRL_CLK_25_128 7
+#define MDIO_CTRL_START BIT(23)
+#define MDIO_CTRL_SPRES_PRMBL BIT(22)
+#define MDIO_CTRL_OP_READ BIT(21) /* 1:read, 0:write */
+#define MDIO_CTRL_REG_MASK 0x1FUL
+#define MDIO_CTRL_REG_SHIFT 16
+#define MDIO_CTRL_DATA_MASK 0xFFFFUL
+#define MDIO_CTRL_DATA_SHIFT 0
+#define MDIO_MAX_AC_TO 120 /* 1.2ms timeout for slow clk */
+
+/* for extension reg access */
+#define REG_MDIO_EXTN 0x1448
+#define MDIO_EXTN_PORTAD_MASK 0x1FUL
+#define MDIO_EXTN_PORTAD_SHIFT 21
+#define MDIO_EXTN_DEVAD_MASK 0x1FUL
+#define MDIO_EXTN_DEVAD_SHIFT 16
+#define MDIO_EXTN_REG_MASK 0xFFFFUL
+#define MDIO_EXTN_REG_SHIFT 0
/* BIST Control and Status Register0 (for the Packet Memory) */
#define REG_BIST0_CTRL 0x141c
projects / linux-2.6-microblaze.git / commitdiff