items:
- const: loongson,loongson64v-4core-virtio
+ - description: LS1B based boards
+ items:
+ - enum:
+ - loongson,lsgz-1b-dev
+ - const: loongson,ls1b
+
+ - description: LS1C based boards
+ items:
+ - enum:
+ - loongmasses,smartloong-1c
+ - const: loongson,ls1c
+
additionalProperties: true
...
description: Lontium Semiconductor Corporation
"^loongson,.*":
description: Loongson Technology Corporation Limited
+ "^loongmasses,.*":
+ description: Nanjing Loongmasses Ltd.
"^lsi,.*":
description: LSI Corp. (LSI Logic)
"^lwn,.*":
platform-$(CONFIG_SGI_IP32) += sgi-ip32/
platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/
platform-$(CONFIG_SIBYTE_SB1250) += sibyte/
-platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/
platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/
platform-$(CONFIG_SNI_RM) += sni/
platform-$(CONFIG_MACH_TX49XX) += txx9/
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_KEEP_MEMBLOCK
- select ARCH_SUPPORTS_UPROBES
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
select ARCH_USE_MEMTEST
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT
select DMA_NONCOHERENT
- select ARCH_HAS_SYNC_DMA_FOR_CPU
select IRQ_MIPS_CPU
select PINCTRL
select GPIOLIB
config MIPS_GENERIC_KERNEL
bool "Generic board-agnostic MIPS kernel"
- select ARCH_HAS_SETUP_DMA_OPS
select MIPS_GENERIC
select BOOT_RAW
select BUILTIN_DTB
select BOARD_SCACHE
select CSRC_R4K
select CEVT_R4K
- select CPU_HAS_WB
select FORCE_PCI
select ISA
select I8259
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
help
If you want this kernel to run on SGI O2 workstation, say Y here.
-config SIBYTE_CRHINE
- bool "Sibyte BCM91120C-CRhine"
- select BOOT_ELF32
- select SIBYTE_BCM1120
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CARMEL
- bool "Sibyte BCM91120x-Carmel"
- select BOOT_ELF32
- select SIBYTE_BCM1120
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config SIBYTE_CRHONE
bool "Sibyte BCM91125C-CRhone"
select BOOT_ELF32
config SIBYTE_RHONE
bool "Sibyte BCM91125E-Rhone"
select BOOT_ELF32
- select SIBYTE_BCM1125H
+ select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
bool
config ARCH_SUPPORTS_UPROBES
- bool
+ def_bool y
config DMA_NONCOHERENT
bool
# by pgprot_writcombine can be mixed, and the latter sometimes provides
# significant advantages.
#
+ select ARCH_HAS_SETUP_DMA_OPS
select ARCH_HAS_DMA_WRITE_COMBINE
select ARCH_HAS_DMA_PREP_COHERENT
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_HAS_DMA_SET_UNCACHED
select DMA_NONCOHERENT_MMAP
config MIPS_HUGE_TLB_SUPPORT
def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
-config IRQ_MSP_SLP
- bool
-
-config IRQ_MSP_CIC
- bool
-
config IRQ_TXX9
bool
bool "Loongson 2F"
depends on SYS_HAS_CPU_LOONGSON2F
select CPU_LOONGSON2EF
- select GPIOLIB
help
The Loongson 2F processor implements the MIPS III instruction set
with many extensions.
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
- select ARCH_HAS_PHYS_TO_DMA
config CPU_LOONGSON32
bool
config SYS_HAS_CPU_MIPS32_R5
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_MIPS32_R6
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_MIPS64_R1
bool
config SYS_HAS_CPU_MIPS64_R5
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_MIPS64_R6
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_P5600
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_R3000
bool
config SYS_HAS_CPU_R10000
bool
- select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_RM7000
bool
config SYS_HAS_CPU_BMIPS5000
bool
select SYS_HAS_CPU_BMIPS
- select ARCH_HAS_SYNC_DMA_FOR_CPU
#
# CPU may reorder R->R, R->W, W->R, W->W
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
-config MIPS_VPE_LOADER_CMP
- bool
- default "y"
- depends on MIPS_VPE_LOADER && MIPS_CMP
-
config MIPS_VPE_LOADER_MT
bool
default "y"
- depends on MIPS_VPE_LOADER && !MIPS_CMP
+ depends on MIPS_VPE_LOADER
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
bool "Enable support for AP/SP API (RTLX)"
depends on MIPS_VPE_LOADER
-config MIPS_VPE_APSP_API_CMP
- bool
- default "y"
- depends on MIPS_VPE_APSP_API && MIPS_CMP
-
config MIPS_VPE_APSP_API_MT
bool
default "y"
- depends on MIPS_VPE_APSP_API && !MIPS_CMP
-
-config MIPS_CMP
- bool "MIPS CMP framework support (DEPRECATED)"
- depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
- select SMP
- select SYNC_R4K
- select SYS_SUPPORTS_SMP
- select WEAK_ORDERING
- default n
- help
- Select this if you are using a bootloader which implements the "CMP
- framework" protocol (ie. YAMON) and want your kernel to make use of
- its ability to start secondary CPUs.
-
- Unless you have a specific need, you should use CONFIG_MIPS_CPS
- instead of this.
+ depends on MIPS_VPE_APSP_API
config MIPS_CPS
bool "MIPS Coherent Processing System support"
config SMP_UP
bool
-config SYS_SUPPORTS_MIPS_CMP
- bool
-
config SYS_SUPPORTS_MIPS_CPS
bool
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+ifdef CONFIG_CPU_LOONGSON64
+cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap
+cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
+cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
+endif
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
# For smartmips configurations, there are hundreds of warnings due to ISA overrides
# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
config PCI_AR724X
def_bool n
-config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
-config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-config ATH79_DEV_SPI
- def_bool n
-
-config ATH79_DEV_USB
- def_bool n
-
-config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
endif
/* boardtype, boardnum, boardrev */
static const
struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+ {{BCM47XX_BOARD_HUAWEI_B593U_12, "Huawei B593u-12"}, "0x053d", "1234", "0x1301"},
{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
/* Huawei */
+static const struct gpio_led
+bcm47xx_leds_huawei_b593u_12[] __initconst = {
+ BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_huawei_e970[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
break;
+ case BCM47XX_BOARD_HUAWEI_B593U_12:
+ bcm47xx_set_pdata(bcm47xx_leds_huawei_b593u_12);
+ break;
case BCM47XX_BOARD_HUAWEI_E970:
bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
break;
config CAVIUM_OCTEON_CVMSEG_SIZE
int "Number of L1 cache lines reserved for CVMSEG memory"
range 0 54
- default 1
+ default 0 if !CAVIUM_OCTEON_SOC
+ default 1 if CAVIUM_OCTEON_SOC
help
CVMSEG LM is a segment that accesses portions of the dcache as a
local memory; the larger CVMSEG is, the smaller the cache is.
static int __init octeon_irq_init_cib(struct device_node *ciu_node,
struct device_node *parent)
{
- const __be32 *addr;
+ struct resource res;
u32 val;
struct octeon_irq_cib_host_data *host_data;
int parent_irq;
return -ENOMEM;
raw_spin_lock_init(&host_data->lock);
- addr = of_get_address(ciu_node, 0, NULL, NULL);
- if (!addr) {
+ r = of_address_to_resource(ciu_node, 0, &res);
+ if (r) {
pr_err("ERROR: Couldn't acquire reg(0) %pOFn\n", ciu_node);
- return -EINVAL;
+ return r;
}
- host_data->raw_reg = (u64)phys_to_virt(
- of_translate_address(ciu_node, addr));
+ host_data->raw_reg = (u64)phys_to_virt(res.start);
- addr = of_get_address(ciu_node, 1, NULL, NULL);
- if (!addr) {
+ r = of_address_to_resource(ciu_node, 1, &res);
+ if (r) {
pr_err("ERROR: Couldn't acquire reg(1) %pOFn\n", ciu_node);
- return -EINVAL;
+ return r;
}
- host_data->en_reg = (u64)phys_to_virt(
- of_translate_address(ciu_node, addr));
+ host_data->en_reg = (u64)phys_to_virt(res.start);
r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
if (r) {
static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
struct device_node *parent)
{
- int i;
+ int i, ret;
int node;
struct irq_domain *domain;
struct octeon_ciu3_info *ciu3_info;
- const __be32 *zero_addr;
+ struct resource res;
u64 base_addr;
union cvmx_ciu3_const consts;
if (!ciu3_info)
return -ENOMEM;
- zero_addr = of_get_address(ciu_node, 0, NULL, NULL);
- if (WARN_ON(!zero_addr))
- return -EINVAL;
-
- base_addr = of_translate_address(ciu_node, zero_addr);
- base_addr = (u64)phys_to_virt(base_addr);
+ ret = of_address_to_resource(ciu_node, 0, &res);
+ if (WARN_ON(ret))
+ return ret;
- ciu3_info->ciu3_addr = base_addr;
+ ciu3_info->ciu3_addr = base_addr = (u64)phys_to_virt(res.start);
ciu3_info->node = node;
consts.u64 = cvmx_read_csr(base_addr + CIU3_CONST);
--- /dev/null
+CONFIG_COMMON_CLK=y
+
+CONFIG_GOLDFISH=y
+CONFIG_GOLDFISH_PIC=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_HOST_GENERIC=y
+
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GOLDFISH=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_XHCI_HCD=y
+
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
{
char *result = NULL;
- if (_fw_envp != NULL) {
+ if (_fw_envp != NULL && fw_envp(0) != NULL) {
/*
* Return a pointer to the given environment variable.
* YAMON uses "name", "value" pairs, while U-Boot uses
#endif
#ifdef CONFIG_CPU_HAS_DIEI
- .macro local_irq_enable reg=t0
+ .macro local_irq_enable
ei
irq_enable_hazard
.endm
- .macro local_irq_disable reg=t0
+ .macro local_irq_disable
di
irq_disable_hazard
.endm
extern void check_bugs32(void);
extern void check_bugs64(void);
-static inline void check_bugs_early(void)
-{
- if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
- check_bugs64_early();
-}
-
-static inline void check_bugs(void)
+static inline void __init check_bugs(void)
{
unsigned int cpu = smp_processor_id();
#define __read_mostly __section(".data..read_mostly")
+extern void cache_noop(void);
+
#endif /* _ASM_CACHE_H */
unsigned long len);
extern void (*flush_icache_all)(void);
-extern void (*local_flush_data_cache_page)(void * addr);
extern void (*flush_data_cache_page)(unsigned long addr);
/* Run kernel code uncached, useful for cache probing functions. */
#define cpu_has_3k_cache __isa_lt_and_opt(1, MIPS_CPU_3K_CACHE)
#endif
#ifndef cpu_has_4k_cache
-#define cpu_has_4k_cache __isa_ge_or_opt(1, MIPS_CPU_4K_CACHE)
+#define cpu_has_4k_cache __opt(MIPS_CPU_4K_CACHE)
#endif
#ifndef cpu_has_octeon_cache
-#define cpu_has_octeon_cache 0
+#define cpu_has_octeon_cache \
+({ \
+ int __res; \
+ \
+ switch (current_cpu_type()) { \
+ case CPU_CAVIUM_OCTEON: \
+ case CPU_CAVIUM_OCTEON_PLUS: \
+ case CPU_CAVIUM_OCTEON2: \
+ case CPU_CAVIUM_OCTEON3: \
+ __res = 1; \
+ break; \
+ \
+ default: \
+ __res = 0; \
+ } \
+ \
+ __res; \
+})
#endif
/* Don't override `cpu_has_fpu' to 1 or the "nofpu" option won't work. */
#ifndef cpu_has_fpu
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This file contains the MIPS architecture specific IDE code.
- */
-#ifndef __ASM_IDE_H
-#define __ASM_IDE_H
-
-#include <ide.h>
-
-#endif /* __ASM_IDE_H */
#define ioremap_wc(offset, size) \
ioremap_prot((offset), (size), boot_cpu_data.writecombine)
-#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_CAVIUM_OCTEON)
#define war_io_reorder_wmb() wmb()
#else
#define war_io_reorder_wmb() barrier()
BCM47XX_BOARD_DLINK_DIR130,
BCM47XX_BOARD_DLINK_DIR330,
+ BCM47XX_BOARD_HUAWEI_B593U_12,
BCM47XX_BOARD_HUAWEI_E970,
BCM47XX_BOARD_LINKSYS_E900V1,
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- * Copied from i386; many of the especially older MIPS or ISA-based platforms
- * are basically identical. Using this file probably implies i8259 PIC
- * support in a system but the very least interrupt numbers 0 - 15 need to
- * be put aside for legacy devices.
- */
-#ifndef __ASM_MACH_GENERIC_IDE_H
-#define __ASM_MACH_GENERIC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <linux/pci.h>
-#include <linux/stddef.h>
-#include <asm/processor.h>
-
-/* MIPS port and memory-mapped I/O string operations. */
-static inline void __ide_flush_prologue(void)
-{
-#ifdef CONFIG_SMP
- if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
- preempt_disable();
-#endif
-}
-
-static inline void __ide_flush_epilogue(void)
-{
-#ifdef CONFIG_SMP
- if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
- preempt_enable();
-#endif
-}
-
-static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
-{
- if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
- unsigned long end = addr + size;
-
- while (addr < end) {
- local_flush_data_cache_page((void *)addr);
- addr += PAGE_SIZE;
- }
- }
-}
-
-/*
- * insw() and gang might be called with interrupts disabled, so we can't
- * send IPIs for flushing due to the potencial of deadlocks, see the comment
- * above smp_call_function() in arch/mips/kernel/smp.c. We work around the
- * problem by disabling preemption so we know we actually perform the flush
- * on the processor that actually has the lines to be flushed which hopefully
- * is even better for performance anyway.
- */
-static inline void __ide_insw(unsigned long port, void *addr,
- unsigned int count)
-{
- __ide_flush_prologue();
- insw(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 2);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
-{
- __ide_flush_prologue();
- insl(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 4);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_outsw(unsigned long port, const void *addr,
- unsigned long count)
-{
- __ide_flush_prologue();
- outsw(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 2);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_outsl(unsigned long port, const void *addr,
- unsigned long count)
-{
- __ide_flush_prologue();
- outsl(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 4);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
-{
- __ide_flush_prologue();
- readsw(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 2);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
-{
- __ide_flush_prologue();
- readsl(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 4);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
-{
- __ide_flush_prologue();
- writesw(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 2);
- __ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
-{
- __ide_flush_prologue();
- writesl(port, addr, count);
- __ide_flush_dcache_range((unsigned long)addr, count * 4);
- __ide_flush_epilogue();
-}
-
-/* ide_insw calls insw, not __ide_insw. Why? */
-#undef insw
-#undef insl
-#undef outsw
-#undef outsl
-#define insw(port, addr, count) __ide_insw(port, addr, count)
-#define insl(port, addr, count) __ide_insl(port, addr, count)
-#define outsw(port, addr, count) __ide_outsw(port, addr, count)
-#define outsl(port, addr, count) __ide_outsl(port, addr, count)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_MACH_GENERIC_IDE_H */
#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
-/* allow booting xrx200 phys */
-int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
-
/* request a non-gpio and set the PIO config */
#define PMU_PPE BIT(13)
extern void ltq_pmu_enable(unsigned int module);
#ifndef _MT7620_REGS_H_
#define _MT7620_REGS_H_
-#define MT7620_SYSC_BASE 0x10000000
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+#define MT7620_SYSC_BASE IOMEM(0x10000000)
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
#ifndef _RT288X_REGS_H_
#define _RT288X_REGS_H_
-#define RT2880_SYSC_BASE 0x00300000
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+#define RT2880_SYSC_BASE IOMEM(0x00300000)
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
return ralink_soc == RT305X_SOC_RT5350;
}
-#define RT305X_SYSC_BASE 0x10000000
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+#define RT305X_SYSC_BASE IOMEM(0x10000000)
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
#include <linux/bitops.h>
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+
#define RT3883_SDRAM_BASE 0x00000000
-#define RT3883_SYSC_BASE 0x10000000
+#define RT3883_SYSC_BASE IOMEM(0x10000000)
#define RT3883_TIMER_BASE 0x10000100
#define RT3883_INTC_BASE 0x10000200
#define RT3883_MEMC_BASE 0x10000300
#define __WRITEABLE (_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED)
#define _PAGE_CHG_MASK (_PAGE_ACCESSED | _PAGE_MODIFIED | \
- _PAGE_SOFT_DIRTY | _PFN_MASK | _CACHE_MASK)
+ _PAGE_SOFT_DIRTY | _PFN_MASK | \
+ _CACHE_MASK | _PAGE_SPECIAL)
#endif /* _ASM_PGTABLE_BITS_H */
#define COP2_INIT \
.cp2 = {0,},
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+ CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
struct octeon_cvmseg_state {
unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
[cpu_dcache_line_size() / sizeof(unsigned long)];
};
-
+#endif
#else
#define COP2_INIT
#endif
unsigned long trap_nr;
#ifdef CONFIG_CPU_CAVIUM_OCTEON
struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+ CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
+#endif
#endif
struct mips_abi *abi;
};
extern struct rtlx_info {
unsigned long id;
enum rtlx_state state;
- int ap_int_pending; /* Status of 0 or 1 for CONFIG_MIPS_CMP only */
struct rtlx_channel channel[RTLX_CHANNELS];
} *rtlx;
#define _SIBYTE_BOARD_H
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
- defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+ defined(CONFIG_SIBYTE_LITTLESUR)
#include <asm/sibyte/swarm.h>
#endif
#include <asm/sibyte/sentosa.h>
#endif
-#ifdef CONFIG_SIBYTE_CARMEL
-#include <asm/sibyte/carmel.h>
-#endif
-
#ifdef CONFIG_SIBYTE_BIGSUR
#include <asm/sibyte/bigsur.h>
#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2002 Broadcom Corporation
- */
-#ifndef __ASM_SIBYTE_CARMEL_H
-#define __ASM_SIBYTE_CARMEL_H
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_int.h>
-
-#define SIBYTE_BOARD_NAME "Carmel"
-
-#define GPIO_PHY_INTERRUPT 2
-#define GPIO_NONMASKABLE_INT 3
-#define GPIO_CF_INSERTED 6
-#define GPIO_MONTEREY_RESET 7
-#define GPIO_QUADUART_INT 8
-#define GPIO_CF_INT 9
-#define GPIO_FPGA_CCLK 10
-#define GPIO_FPGA_DOUT 11
-#define GPIO_FPGA_DIN 12
-#define GPIO_FPGA_PGM 13
-#define GPIO_FPGA_DONE 14
-#define GPIO_FPGA_INIT 15
-
-#define LEDS_CS 2
-#define LEDS_PHYS 0x100C0000
-#define MLEDS_CS 3
-#define MLEDS_PHYS 0x100A0000
-#define UART_CS 4
-#define UART_PHYS 0x100D0000
-#define ARAVALI_CS 5
-#define ARAVALI_PHYS 0x11000000
-#define IDE_CS 6
-#define IDE_PHYS 0x100B0000
-#define ARAVALI2_CS 7
-#define ARAVALI2_PHYS 0x100E0000
-
-#if defined(CONFIG_SIBYTE_CARMEL)
-#define K_GPIO_GB_IDE 9
-#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
-#endif
-
-
-#endif /* __ASM_SIBYTE_CARMEL_H */
#define SIBYTE_HAVE_PCMCIA 0
#define SIBYTE_HAVE_IDE 0
#endif
-#ifdef CONFIG_SIBYTE_CRHINE
-#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
-#define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE 0
-#endif
/* Generic bus chip selects */
#define LEDS_CS 3
#endif
}
-static inline int register_cmp_smp_ops(void)
-{
-#ifdef CONFIG_MIPS_CMP
- extern const struct plat_smp_ops cmp_smp_ops;
-
- if (!mips_cm_present())
- return -ENODEV;
-
- register_smp_ops(&cmp_smp_ops);
-
- return 0;
-#else
- return -ENODEV;
-#endif
-}
-
static inline int register_vsmp_smp_ops(void)
{
#ifdef CONFIG_MIPS_MT_SMP
static inline int aprp_cpu_index(void)
{
-#ifdef CONFIG_MIPS_CMP
- return setup_max_cpus;
-#else
extern int tclimit;
return tclimit;
-#endif
}
enum vpe_state {
obj-$(CONFIG_MIPS_MT) += mips-mt.o
obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
-obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o
obj-$(CONFIG_MIPS_CPS_NS16550) += cps-vec-ns16550.o
obj-$(CONFIG_MIPS_SPRAM) += spram.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
-obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
-obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
OFFSET(OCTEON_CP2_HSH_IVW, octeon_cop2_state, cop2_hsh_ivw);
OFFSET(OCTEON_CP2_SHA3, octeon_cop2_state, cop2_sha3);
OFFSET(THREAD_CP2, task_struct, thread.cp2);
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+ CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
OFFSET(THREAD_CVMSEG, task_struct, thread.cvmseg.cvmseg);
+#endif
BLANK();
}
#endif
li t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
mtc0 t0, CP0_STATUS
+ /* We don't know how to do coherence setup on earlier ISA */
+#if MIPS_ISA_REV > 0
/* Skip cache & coherence setup if we're already coherent */
lw s7, GCR_CL_COHERENCE_OFS(s1)
bnez s7, 1f
li t0, 0xff
sw t0, GCR_CL_COHERENCE_OFS(s1)
ehb
+#endif /* MIPS_ISA_REV > 0 */
/* Set Kseg0 CCA to that in s0 */
1: mfc0 t0, CP0_CONFIG
nop
END(mips_cps_boot_vpes)
+#if MIPS_ISA_REV > 0
LEAF(mips_cps_cache_init)
/*
* Clear the bits used to index the caches. Note that the architecture
jr ra
nop
END(mips_cps_cache_init)
+#endif /* MIPS_ISA_REV > 0 */
#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
+ /* Octeon has different cache interface */
+ c->options &= ~MIPS_CPU_4K_CACHE;
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_CAVIUM_CN38XX:
case PRID_IMP_CAVIUM_CN31XX:
phys_addr_t __mips_cm_phys_base(void)
{
- u32 config3 = read_c0_config3();
unsigned long cmgcr;
/* Check the CMGCRBase register is implemented */
- if (!(config3 & MIPS_CONF3_CMGCR))
+ if (!(read_c0_config() & MIPS_CONF_M))
+ return 0;
+
+ if (!(read_c0_config2() & MIPS_CONF_M))
+ return 0;
+
+ if (!(read_c0_config3() & MIPS_CONF3_CMGCR))
return 0;
/* Read the address from CMGCRBase */
jr ra
nop
.space 30 * 4, 0
-octeon_mult_save_end:
EXPORT(octeon_mult_save_end)
END(octeon_mult_save)
sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */
jr ra
sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */
-octeon_mult_save2_end:
EXPORT(octeon_mult_save2_end)
END(octeon_mult_save2)
sd $10, PT_MPL+(4*8)(sp) /* store MPL4 */
jr ra
sd $11, PT_MPL+(5*8)(sp) /* store MPL5 */
-octeon_mult_save3_end:
EXPORT(octeon_mult_save3_end)
END(octeon_mult_save3)
.set pop
jr ra
nop
.space 30 * 4, 0
-octeon_mult_restore_end:
EXPORT(octeon_mult_restore_end)
END(octeon_mult_restore)
mtp1 v0 /* P1 */
jr ra
mtp0 v1 /* P0 */
-octeon_mult_restore2_end:
EXPORT(octeon_mult_restore2_end)
END(octeon_mult_restore2)
.word 0x714b000b
/* mtp2 $10, $11 restore P2 and P5 */
-octeon_mult_restore3_end:
EXPORT(octeon_mult_restore3_end)
END(octeon_mult_restore3)
.set pop
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-
-#include <asm/mips_mt.h>
-#include <asm/vpe.h>
-#include <asm/rtlx.h>
-
-static int major;
-
-static void rtlx_interrupt(void)
-{
- int i;
- struct rtlx_info *info;
- struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
-
- if (p == NULL || *p == NULL)
- return;
-
- info = *p;
-
- if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
- for (i = 0; i < RTLX_CHANNELS; i++) {
- wake_up(&channel_wqs[i].lx_queue);
- wake_up(&channel_wqs[i].rt_queue);
- }
- info->ap_int_pending = 0;
- }
-}
-
-void _interrupt_sp(void)
-{
- smp_send_reschedule(aprp_cpu_index());
-}
-
-int __init rtlx_module_init(void)
-{
- struct device *dev;
- int i, err;
-
- if (!cpu_has_mipsmt) {
- pr_warn("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (num_possible_cpus() - aprp_cpu_index() < 1) {
- pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
- "Pass maxcpus=<n> argument as kernel argument\n");
-
- return -ENODEV;
- }
-
- major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
- if (major < 0) {
- pr_err("rtlx_module_init: unable to register device\n");
- return major;
- }
-
- /* initialise the wait queues */
- for (i = 0; i < RTLX_CHANNELS; i++) {
- init_waitqueue_head(&channel_wqs[i].rt_queue);
- init_waitqueue_head(&channel_wqs[i].lx_queue);
- atomic_set(&channel_wqs[i].in_open, 0);
- mutex_init(&channel_wqs[i].mutex);
-
- dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
- "%s%d", RTLX_MODULE_NAME, i);
- if (IS_ERR(dev)) {
- while (i--)
- device_destroy(mt_class, MKDEV(major, i));
-
- err = PTR_ERR(dev);
- goto out_chrdev;
- }
- }
-
- /* set up notifiers */
- rtlx_notify.start = rtlx_starting;
- rtlx_notify.stop = rtlx_stopping;
- vpe_notify(aprp_cpu_index(), &rtlx_notify);
-
- if (cpu_has_vint) {
- aprp_hook = rtlx_interrupt;
- } else {
- pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
- err = -ENODEV;
- goto out_class;
- }
-
- return 0;
-
-out_class:
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-out_chrdev:
- unregister_chrdev(major, RTLX_MODULE_NAME);
-
- return err;
-}
-
-void __exit rtlx_module_exit(void)
-{
- int i;
-
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-
- unregister_chrdev(major, RTLX_MODULE_NAME);
-
- aprp_hook = NULL;
-}
setup_early_printk();
#endif
cpu_report();
- check_bugs_early();
+ if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+ check_bugs64_early();
#if defined(CONFIG_VT)
#if defined(CONFIG_VGA_CONSOLE)
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * Chris Dearman (chris@mips.com)
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/sched/task_stack.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips_mt.h>
-#include <asm/amon.h>
-
-static void cmp_init_secondary(void)
-{
- struct cpuinfo_mips *c __maybe_unused = ¤t_cpu_data;
-
- /* Assume GIC is present */
- change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
- STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
-
- /* Enable per-cpu interrupts: platform specific */
-
-#ifdef CONFIG_MIPS_MT_SMP
- if (cpu_has_mipsmt)
- cpu_set_vpe_id(c, (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
- TCBIND_CURVPE);
-#endif
-}
-
-static void cmp_smp_finish(void)
-{
- pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
- /* CDFIXME: remove this? */
- write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
-
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
- local_irq_enable();
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it running
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- */
-static int cmp_boot_secondary(int cpu, struct task_struct *idle)
-{
- struct thread_info *gp = task_thread_info(idle);
- unsigned long sp = __KSTK_TOS(idle);
- unsigned long pc = (unsigned long)&smp_bootstrap;
- unsigned long a0 = 0;
-
- pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
- __func__, cpu);
-
-#if 0
- /* Needed? */
- flush_icache_range((unsigned long)gp,
- (unsigned long)(gp + sizeof(struct thread_info)));
-#endif
-
- amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
- return 0;
-}
-
-/*
- * Common setup before any secondaries are started
- */
-void __init cmp_smp_setup(void)
-{
- int i;
- int ncpu = 0;
-
- pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpumask_set_cpu(0, &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
- for (i = 1; i < NR_CPUS; i++) {
- if (amon_cpu_avail(i)) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++ncpu;
- __cpu_logical_map[ncpu] = i;
- }
- }
-
- if (cpu_has_mipsmt) {
- unsigned int nvpe = 1;
-#ifdef CONFIG_MIPS_MT_SMP
- unsigned int mvpconf0 = read_c0_mvpconf0();
-
- nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-#endif
- smp_num_siblings = nvpe;
- }
- pr_info("Detected %i available secondary CPU(s)\n", ncpu);
-}
-
-void __init cmp_prepare_cpus(unsigned int max_cpus)
-{
- pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
- smp_processor_id(), __func__, max_cpus);
-
-#ifdef CONFIG_MIPS_MT
- /*
- * FIXME: some of these options are per-system, some per-core and
- * some per-cpu
- */
- mips_mt_set_cpuoptions();
-#endif
-
-}
-
-const struct plat_smp_ops cmp_smp_ops = {
- .send_ipi_single = mips_smp_send_ipi_single,
- .send_ipi_mask = mips_smp_send_ipi_mask,
- .init_secondary = cmp_init_secondary,
- .smp_finish = cmp_smp_finish,
- .boot_secondary = cmp_boot_secondary,
- .smp_setup = cmp_smp_setup,
- .prepare_cpus = cmp_prepare_cpus,
-};
static void cps_init_secondary(void)
{
+ int core = cpu_core(¤t_cpu_data);
+
/* Disable MT - we only want to run 1 TC per VPE */
if (cpu_has_mipsmt)
dmt();
BUG_ON(ident != mips_cm_vp_id(smp_processor_id()));
}
+ if (core > 0 && !read_gcr_cl_coherence())
+ pr_warn("Core %u is not in coherent domain\n", core);
+
if (cpu_has_veic)
clear_c0_status(ST0_IM);
else
{
struct uprobe_task *utask = current->utask;
+ current->thread.trap_nr = utask->autask.saved_trap_nr;
instruction_pointer_set(regs, utask->vaddr);
}
return ra;
}
-/**
- * set_swbp - store breakpoint at a given address.
- * @auprobe: arch specific probepoint information.
- * @mm: the probed process address space.
- * @vaddr: the virtual address to insert the opcode.
- *
- * For mm @mm, store the breakpoint instruction at @vaddr.
- * Return 0 (success) or a negative errno.
- *
- * This version overrides the weak version in kernel/events/uprobes.c.
- * It is required to handle MIPS16 and microMIPS.
- */
-int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
- unsigned long vaddr)
-{
- return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
-}
-
void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
void *src, unsigned long len)
{
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/vpe.h>
-
-static int major;
-
-void cleanup_tc(struct tc *tc)
-{
-
-}
-
-static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
- struct vpe_notifications *notifier;
-
- list_for_each_entry(notifier, &vpe->notify, list)
- notifier->stop(aprp_cpu_index());
-
- release_progmem(vpe->load_addr);
- vpe->state = VPE_STATE_UNUSED;
-
- return len;
-}
-static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
-
-static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
- char *buf)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
-
- return sprintf(buf, "%d\n", vpe->ntcs);
-}
-
-static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
- unsigned long new;
- int ret;
-
- ret = kstrtoul(buf, 0, &new);
- if (ret < 0)
- return ret;
-
- /* APRP can only reserve one TC in a VPE and no more. */
- if (new != 1)
- return -EINVAL;
-
- vpe->ntcs = new;
-
- return len;
-}
-static DEVICE_ATTR_RW(ntcs);
-
-static struct attribute *vpe_attrs[] = {
- &dev_attr_kill.attr,
- &dev_attr_ntcs.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(vpe);
-
-static void vpe_device_release(struct device *cd)
-{
-}
-
-static struct class vpe_class = {
- .name = "vpe",
- .dev_release = vpe_device_release,
- .dev_groups = vpe_groups,
-};
-
-static struct device vpe_device;
-
-int __init vpe_module_init(void)
-{
- struct vpe *v = NULL;
- struct tc *t;
- int err;
-
- if (!cpu_has_mipsmt) {
- pr_warn("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (num_possible_cpus() - aprp_cpu_index() < 1) {
- pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
- "Pass maxcpus=<n> argument as kernel argument\n");
- return -ENODEV;
- }
-
- major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
- if (major < 0) {
- pr_warn("VPE loader: unable to register character device\n");
- return major;
- }
-
- err = class_register(&vpe_class);
- if (err) {
- pr_err("vpe_class registration failed\n");
- goto out_chrdev;
- }
-
- device_initialize(&vpe_device);
- vpe_device.class = &vpe_class;
- vpe_device.parent = NULL;
- dev_set_name(&vpe_device, "vpe_sp");
- vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
- err = device_add(&vpe_device);
- if (err) {
- pr_err("Adding vpe_device failed\n");
- goto out_class;
- }
-
- t = alloc_tc(aprp_cpu_index());
- if (!t) {
- pr_warn("VPE: unable to allocate TC\n");
- err = -ENOMEM;
- goto out_dev;
- }
-
- /* VPE */
- v = alloc_vpe(aprp_cpu_index());
- if (v == NULL) {
- pr_warn("VPE: unable to allocate VPE\n");
- kfree(t);
- err = -ENOMEM;
- goto out_dev;
- }
-
- v->ntcs = 1;
-
- /* add the tc to the list of this vpe's tc's. */
- list_add(&t->tc, &v->tc);
-
- /* TC */
- t->pvpe = v; /* set the parent vpe */
-
- return 0;
-
-out_dev:
- device_del(&vpe_device);
-
-out_class:
- put_device(&vpe_device);
- class_unregister(&vpe_class);
-
-out_chrdev:
- unregister_chrdev(major, VPE_MODULE_NAME);
-
- return err;
-}
-
-void __exit vpe_module_exit(void)
-{
- struct vpe *v, *n;
-
- device_unregister(&vpe_device);
- class_unregister(&vpe_class);
- unregister_chrdev(major, VPE_MODULE_NAME);
-
- /* No locking needed here */
- list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
- if (v->state != VPE_STATE_UNUSED)
- release_vpe(v);
-}
static int vpe_release(struct inode *inode, struct file *filp)
{
-#if defined(CONFIG_MIPS_VPE_LOADER_MT) || defined(CONFIG_MIPS_VPE_LOADER_CMP)
+#ifdef CONFIG_MIPS_VPE_LOADER_MT
struct vpe *v;
Elf_Ehdr *hdr;
int ret = 0;
config LEMOTE_FULOONG2E
bool "Lemote Fuloong(2e) mini-PC"
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_PHYS_TO_DMA
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select CEVT_R4K
config LEMOTE_MACH2F
bool "Lemote Loongson 2F family machines"
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_PHYS_TO_DMA
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select BOARD_SCACHE
select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select GPIOLIB
select FORCE_PCI
select I8259
select IRQ_MIPS_CPU
# Loongson Processors' Support
#
-cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
-#
-# Some versions of binutils, not currently mainline as of 2019/02/04, support
-# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
-# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
-# description).
-#
-# We disable this in order to prevent the assembler meddling with the
-# instruction that labels refer to, ie. if we label an ll instruction:
-#
-# 1: ll v0, 0(a0)
-#
-# ...then with the assembler fix applied the label may actually point at a sync
-# instruction inserted by the assembler, and if we were using the label in an
-# exception table the table would no longer contain the address of the ll
-# instruction.
-#
-# Avoid this by explicitly disabling that assembler behaviour. If upstream
-# binutils does not merge support for the flag then we can revisit & remove
-# this later - for now it ensures vendor toolchains don't cause problems.
-#
-cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
-
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
-cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
#
# Loongson Machines' Support
#
lo |= 0x00000063;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
-
+ break;
default:
/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
break;
-#
-# Loongson Processors' Support
-#
-
-
-cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap
-
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
#
# Loongson Machines' Support
#
#include <linux/export.h>
#include <linux/init.h>
-#include <asm/wbflush.h>
#include <asm/bootinfo.h>
#include <linux/libfdt.h>
#include <linux/of_fdt.h>
void *loongson_fdt_blob;
-static void wbflush_loongson(void)
-{
- asm(".set\tpush\n\t"
- ".set\tnoreorder\n\t"
- ".set mips3\n\t"
- "sync\n\t"
- "nop\n\t"
- ".set\tpop\n\t"
- ".set mips0\n\t");
-}
-
-void (*__wbflush)(void) = wbflush_loongson;
-EXPORT_SYMBOL(__wbflush);
-
void __init plat_mem_setup(void)
{
if (loongson_fdt_blob)
#define LS_IPI_IRQ (MIPS_CPU_IRQ_BASE + 6)
-static void *ipi_set0_regs[16];
-static void *ipi_clear0_regs[16];
-static void *ipi_status0_regs[16];
-static void *ipi_en0_regs[16];
-static void *ipi_mailbox_buf[16];
+static void __iomem *ipi_set0_regs[16];
+static void __iomem *ipi_clear0_regs[16];
+static void __iomem *ipi_status0_regs[16];
+static void __iomem *ipi_en0_regs[16];
+static void __iomem *ipi_mailbox_buf[16];
static uint32_t core0_c0count[NR_CPUS];
-/* read a 32bit value from ipi register */
-#define loongson3_ipi_read32(addr) readl(addr)
-/* read a 64bit value from ipi register */
-#define loongson3_ipi_read64(addr) readq(addr)
-/* write a 32bit value to ipi register */
-#define loongson3_ipi_write32(action, addr) \
- do { \
- writel(action, addr); \
- __wbflush(); \
- } while (0)
-/* write a 64bit value to ipi register */
-#define loongson3_ipi_write64(action, addr) \
- do { \
- writeq(action, addr); \
- __wbflush(); \
- } while (0)
-
static u32 (*ipi_read_clear)(int cpu);
static void (*ipi_write_action)(int cpu, u32 action);
static void (*ipi_write_enable)(int cpu);
u32 action;
/* Load the ipi register to figure out what we're supposed to do */
- action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+ action = readl_relaxed(ipi_status0_regs[cpu_logical_map(cpu)]);
/* Clear the ipi register to clear the interrupt */
- loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+ writel_relaxed(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+ nudge_writes();
return action;
}
static void legacy_ipi_write_action(int cpu, u32 action)
{
- loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+ writel_relaxed((u32)action, ipi_set0_regs[cpu]);
+ nudge_writes();
}
static void legacy_ipi_write_enable(int cpu)
{
- loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
+ writel_relaxed(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
}
static void legacy_ipi_clear_buf(int cpu)
{
- loongson3_ipi_write64(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+ writeq_relaxed(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
}
static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
cpu, startargs[0], startargs[1], startargs[2]);
- loongson3_ipi_write64(startargs[3],
+ writeq_relaxed(startargs[3],
ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x18);
- loongson3_ipi_write64(startargs[2],
+ writeq_relaxed(startargs[2],
ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x10);
- loongson3_ipi_write64(startargs[1],
+ writeq_relaxed(startargs[1],
ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x8);
- loongson3_ipi_write64(startargs[0],
+ writeq_relaxed(startargs[0],
ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+ nudge_writes();
}
static void csr_ipi_probe(void)
c0count = c0count ? c0count : 1;
for (i = 1; i < nr_cpu_ids; i++)
core0_c0count[i] = c0count;
- __wbflush(); /* Let others see the result ASAP */
+ nudge_writes(); /* Let others see the result ASAP */
}
return IRQ_HANDLED;
else
mask = *cpu_online_mask;
cpumask_clear_cpu(cpu, &mask);
+#ifdef CONFIG_CAVIUM_OCTEON_SOC
for_each_cpu(cpu, &mask)
octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
+#else
+ smp_call_function_many(&mask, (smp_call_func_t)octeon_local_flush_icache,
+ NULL, 1);
+#endif
preempt_enable();
#endif
r3k_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
}
-static void local_r3k_flush_data_cache_page(void *addr)
-{
-}
-
static void r3k_flush_data_cache_page(unsigned long addr)
{
}
__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
- local_flush_data_cache_page = local_r3k_flush_data_cache_page;
flush_data_cache_page = r3k_flush_data_cache_page;
_dma_cache_wback_inv = r3k_dma_cache_wback_inv;
static unsigned long vcache_size __read_mostly;
static unsigned long scache_size __read_mostly;
-/*
- * Dummy cache handling routines for machines without boardcaches
- */
-static void cache_noop(void) {}
-
-static struct bcache_ops no_sc_ops = {
- .bc_enable = (void *)cache_noop,
- .bc_disable = (void *)cache_noop,
- .bc_wback_inv = (void *)cache_noop,
- .bc_inv = (void *)cache_noop
-};
-
-struct bcache_ops *bcops = &no_sc_ops;
-
#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
#endif
-static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_dcache_page_indexed_setup(void)
-{
- unsigned long dc_lsize = cpu_dcache_line_size();
-
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
- r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
- else if (dc_lsize == 32)
- r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
- else if (dc_lsize == 64)
- r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed;
- else if (dc_lsize == 128)
- r4k_blast_dcache_page_indexed = blast_dcache128_page_indexed;
-}
-
void (* r4k_blast_dcache)(void);
EXPORT_SYMBOL(r4k_blast_dcache);
addr | ws, 32);
}
-static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- blast_icache32_page_indexed(page);
- local_irq_restore(flags);
-}
-
-static inline void tx49_blast_icache32_page_indexed(unsigned long page)
-{
- unsigned long indexmask = current_cpu_data.icache.waysize - 1;
- unsigned long start = INDEX_BASE + (page & indexmask);
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- CACHE32_UNROLL32_ALIGN2;
- /* I'm in even chunk. blast odd chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
- cache_unroll(32, kernel_cache, Index_Invalidate_I,
- addr | ws, 32);
- CACHE32_UNROLL32_ALIGN;
- /* I'm in odd chunk. blast even chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400 * 2)
- cache_unroll(32, kernel_cache, Index_Invalidate_I,
- addr | ws, 32);
-}
-
static void (* r4k_blast_icache_page)(unsigned long addr);
static void r4k_blast_icache_page_setup(void)
#endif
-static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_icache_page_indexed_setup(void)
-{
- unsigned long ic_lsize = cpu_icache_line_size();
-
- if (ic_lsize == 0)
- r4k_blast_icache_page_indexed = (void *)cache_noop;
- else if (ic_lsize == 16)
- r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
- else if (ic_lsize == 32) {
- if (IS_ENABLED(CONFIG_WAR_R4600_V1_INDEX_ICACHEOP) &&
- cpu_is_r4600_v1_x())
- r4k_blast_icache_page_indexed =
- blast_icache32_r4600_v1_page_indexed;
- else if (IS_ENABLED(CONFIG_WAR_TX49XX_ICACHE_INDEX_INV))
- r4k_blast_icache_page_indexed =
- tx49_blast_icache32_page_indexed;
- else if (current_cpu_type() == CPU_LOONGSON2EF)
- r4k_blast_icache_page_indexed =
- loongson2_blast_icache32_page_indexed;
- else
- r4k_blast_icache_page_indexed =
- blast_icache32_page_indexed;
- } else if (ic_lsize == 64)
- r4k_blast_icache_page_indexed = blast_icache64_page_indexed;
-}
-
void (* r4k_blast_icache)(void);
EXPORT_SYMBOL(r4k_blast_icache);
r4k_blast_scache_page = blast_scache128_page;
}
-static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_scache_page_indexed_setup(void)
-{
- unsigned long sc_lsize = cpu_scache_line_size();
-
- if (scache_size == 0)
- r4k_blast_scache_page_indexed = (void *)cache_noop;
- else if (sc_lsize == 16)
- r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
- else if (sc_lsize == 32)
- r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
- else if (sc_lsize == 64)
- r4k_blast_scache_page_indexed = blast_scache64_page_indexed;
- else if (sc_lsize == 128)
- r4k_blast_scache_page_indexed = blast_scache128_page_indexed;
-}
-
static void (* r4k_blast_scache)(void);
static void r4k_blast_scache_setup(void)
setup_scache();
r4k_blast_dcache_page_setup();
- r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
r4k_blast_icache_page_setup();
- r4k_blast_icache_page_indexed_setup();
r4k_blast_icache_setup();
r4k_blast_scache_page_setup();
- r4k_blast_scache_page_indexed_setup();
r4k_blast_scache_setup();
r4k_blast_scache_node_setup();
#ifdef CONFIG_EVA
__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
flush_icache_all = r4k_flush_icache_all;
- local_flush_data_cache_page = local_r4k_flush_data_cache_page;
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
local_flush_icache_range = local_r4k_flush_icache_range;
__local_flush_icache_user_range = local_r4k_flush_icache_user_range;
#ifdef CONFIG_DMA_NONCOHERENT
- if (dma_default_coherent) {
- _dma_cache_wback_inv = (void *)cache_noop;
- _dma_cache_wback = (void *)cache_noop;
- _dma_cache_inv = (void *)cache_noop;
- } else {
- _dma_cache_wback_inv = r4k_dma_cache_wback_inv;
- _dma_cache_wback = r4k_dma_cache_wback_inv;
- _dma_cache_inv = r4k_dma_cache_inv;
- }
+ _dma_cache_wback_inv = r4k_dma_cache_wback_inv;
+ _dma_cache_wback = r4k_dma_cache_wback_inv;
+ _dma_cache_inv = r4k_dma_cache_inv;
#endif /* CONFIG_DMA_NONCOHERENT */
build_clear_page();
/* I$ fills from D$ just by emptying the write buffers */
flush_cache_page = (void *)b5k_instruction_hazard;
flush_cache_range = (void *)b5k_instruction_hazard;
- local_flush_data_cache_page = (void *)b5k_instruction_hazard;
flush_data_cache_page = (void *)b5k_instruction_hazard;
flush_icache_range = (void *)b5k_instruction_hazard;
local_flush_icache_range = (void *)b5k_instruction_hazard;
flush_cache_range = (void *)cache_noop;
flush_icache_all = (void *)cache_noop;
flush_data_cache_page = (void *)cache_noop;
- local_flush_data_cache_page = (void *)cache_noop;
break;
}
}
#include <linux/highmem.h>
#include <linux/pagemap.h>
+#include <asm/bcache.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/cpu.h>
EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
/* MIPS specific cache operations */
-void (*local_flush_data_cache_page)(void * addr);
void (*flush_data_cache_page)(unsigned long addr);
void (*flush_icache_all)(void);
-EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
EXPORT_SYMBOL(flush_data_cache_page);
EXPORT_SYMBOL(flush_icache_all);
+/*
+ * Dummy cache handling routine
+ */
+
+void cache_noop(void) {}
+
+#ifdef CONFIG_BOARD_SCACHE
+
+static struct bcache_ops no_sc_ops = {
+ .bc_enable = (void *)cache_noop,
+ .bc_disable = (void *)cache_noop,
+ .bc_wback_inv = (void *)cache_noop,
+ .bc_inv = (void *)cache_noop
+};
+
+struct bcache_ops *bcops = &no_sc_ops;
+#endif
+
#ifdef CONFIG_DMA_NONCOHERENT
/* DMA cache operations. */
obj-y += malta-setup.o
obj-y += malta-time.o
-obj-$(CONFIG_MIPS_CMP) += malta-amon.o
-
CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- *
- * Arbitrary Monitor Interface
- */
-#include <linux/kernel.h>
-#include <linux/smp.h>
-
-#include <asm/addrspace.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips-boards/launch.h>
-#include <asm/vpe.h>
-
-int amon_cpu_avail(int cpu)
-{
- struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
- if (cpu < 0 || cpu >= NCPULAUNCH) {
- pr_debug("avail: cpu%d is out of range\n", cpu);
- return 0;
- }
-
- launch += cpu;
- if (!(launch->flags & LAUNCH_FREADY)) {
- pr_debug("avail: cpu%d is not ready\n", cpu);
- return 0;
- }
- if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
- pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
- return 0;
- }
-
- return 1;
-}
-
-int amon_cpu_start(int cpu,
- unsigned long pc, unsigned long sp,
- unsigned long gp, unsigned long a0)
-{
- volatile struct cpulaunch *launch =
- (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
- if (!amon_cpu_avail(cpu))
- return -1;
- if (cpu == smp_processor_id()) {
- pr_debug("launch: I am cpu%d!\n", cpu);
- return -1;
- }
- launch += cpu;
-
- pr_debug("launch: starting cpu%d\n", cpu);
-
- launch->pc = pc;
- launch->gp = gp;
- launch->sp = sp;
- launch->a0 = a0;
-
- smp_wmb(); /* Target must see parameters before go */
- launch->flags |= LAUNCH_FGO;
- smp_wmb(); /* Target must see go before we poll */
-
- while ((launch->flags & LAUNCH_FGONE) == 0)
- ;
- smp_rmb(); /* Target will be updating flags soon */
- pr_debug("launch: cpu%d gone!\n", cpu);
-
- return 0;
-}
-
-#ifdef CONFIG_MIPS_VPE_LOADER_CMP
-int vpe_run(struct vpe *v)
-{
- struct vpe_notifications *n;
-
- if (amon_cpu_start(aprp_cpu_index(), v->__start, 0, 0, 0) < 0)
- return -1;
-
- list_for_each_entry(n, &v->notify, list)
- n->start(VPE_MODULE_MINOR);
-
- return 0;
-}
-#endif
if (!register_cps_smp_ops())
return;
- if (!register_cmp_smp_ops())
- return;
if (!register_vsmp_smp_ops())
return;
register_up_smp_ops();
static struct plat_serial8250_port uart8250_data[] = {
SMC_PORT(0x3F8, 4),
SMC_PORT(0x2F8, 3),
-#ifndef CONFIG_MIPS_CMP
{
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
-#endif
{ },
};
/* and enable the clocks */
clk_enable(clk_pci);
- if (of_find_property(node, "lantiq,external-clock", NULL))
+ if (of_property_read_bool(node, "lantiq,external-clock"))
clk_enable(clk_external);
else
clk_disable(clk_external);
/* find the interrupt controller child node */
for_each_child_of_node(np, child) {
- if (of_get_property(child, "interrupt-controller", NULL)) {
+ if (of_property_read_bool(child, "interrupt-controller")) {
rpc->intc_of_node = child;
break;
}
select MIPS_AUTO_PFN_OFFSET
select MIPS_L1_CACHE_SHIFT_4
select HAVE_PCI
+ select SOC_BUS
config SOC_RT305X
bool "RT305x"
+ select SOC_BUS
config SOC_RT3883
bool "RT3883"
select HAVE_PCI
+ select SOC_BUS
config SOC_MT7620
bool "MT7620/8"
select CPU_MIPSR2_IRQ_VI
select HAVE_PCI
+ select SOC_BUS
config SOC_MT7621
bool "MT7621"
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
/* does the board have sdram or ddram */
static int dram_type;
+static struct ralink_soc_info *soc_info_ptr;
+
static __init u32
mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
{
}
}
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init mt7620_get_soc_name0(void)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
- unsigned char *name = NULL;
- u32 n0;
- u32 n1;
- u32 rev;
- u32 cfg0;
- u32 pmu0;
- u32 pmu1;
- u32 bga;
+ return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7620_get_soc_name1(void)
+{
+ return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7620_soc_valid(void)
+{
+ if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+ mt7620_get_soc_name1() == MT7620_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static bool __init mt7628_soc_valid(void)
+{
+ if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+ mt7620_get_soc_name1() == MT7628_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static unsigned int __init mt7620_get_rev(void)
+{
+ return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7620_get_bga(void)
+{
+ return (mt7620_get_rev() >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+}
+
+static unsigned int __init mt7620_get_efuse(void)
+{
+ return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_EFUSE_CFG);
+}
+
+static unsigned int __init mt7620_get_soc_ver(void)
+{
+ return (mt7620_get_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
- bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+static unsigned int __init mt7620_get_soc_eco(void)
+{
+ return (mt7620_get_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7620_get_soc_name(struct ralink_soc_info *soc_info)
+{
+ if (mt7620_soc_valid()) {
+ u32 bga = mt7620_get_bga();
- if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
if (bga) {
ralink_soc = MT762X_SOC_MT7620A;
- name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
+ return "MT7620A";
} else {
ralink_soc = MT762X_SOC_MT7620N;
- name = "MT7620N";
soc_info->compatible = "ralink,mt7620n-soc";
+ return "MT7620N";
}
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+ } else if (mt7628_soc_valid()) {
+ u32 efuse = mt7620_get_efuse();
+ unsigned char *name = NULL;
if (efuse & EFUSE_MT7688) {
ralink_soc = MT762X_SOC_MT7688;
name = "MT7628AN";
}
soc_info->compatible = "ralink,mt7628an-soc";
+ return name;
} else {
- panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n",
+ mt7620_get_soc_name0(), mt7620_get_soc_name1());
}
+}
+
+static const char __init *mt7620_get_soc_id_name(void)
+{
+ if (ralink_soc == MT762X_SOC_MT7620A)
+ return "mt7620a";
+ else if (ralink_soc == MT762X_SOC_MT7620N)
+ return "mt7620n";
+ else if (ralink_soc == MT762X_SOC_MT7688)
+ return "mt7688";
+ else if (ralink_soc == MT762X_SOC_MT7628AN)
+ return "mt7628n";
+ else
+ return "invalid";
+}
+
+static int __init mt7620_soc_dev_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Ralink";
+ soc_dev_attr->soc_id = mt7620_get_soc_id_name();
+
+ soc_dev_attr->data = soc_info_ptr;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
+ }
+
+ return 0;
+}
+device_initcall(mt7620_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ const char *name = mt7620_get_soc_name(soc_info);
+ u32 cfg0;
+ u32 pmu0;
+ u32 pmu1;
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"MediaTek %s ver:%u eco:%u",
- name,
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
+ name, mt7620_get_soc_ver(), mt7620_get_soc_eco());
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ cfg0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG0);
if (is_mt76x8()) {
dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
} else {
else
mt7620_dram_init(soc_info);
- pmu0 = __raw_readl(sysc + PMU0_CFG);
- pmu1 = __raw_readl(sysc + PMU1_CFG);
+ pmu0 = __raw_readl(MT7620_SYSC_BASE + PMU0_CFG);
+ pmu1 = __raw_readl(MT7620_SYSC_BASE + PMU1_CFG);
pr_info("Analog PMU set to %s control\n",
(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
pr_info("Digital PMU set to %s control\n",
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+ soc_info_ptr = soc_info;
}
if (!register_cps_smp_ops())
return;
- if (!register_cmp_smp_ops())
- return;
if (!register_vsmp_smp_ops())
return;
}
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include "common.h"
+static struct ralink_soc_info *soc_info_ptr;
+
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, wmac_rate = 40000000;
panic("Failed to remap core resources");
}
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt2880_get_soc_name0(void)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
- const char *name;
- u32 n0;
- u32 n1;
- u32 id;
+ return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
- id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt2880_get_soc_name1(void)
+{
+ return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
- if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
- soc_info->compatible = "ralink,r2880-soc";
- name = "RT2880";
- } else {
- panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt2880_soc_valid(void)
+{
+ if (rt2880_get_soc_name0() == RT2880_CHIP_NAME0 &&
+ rt2880_get_soc_name1() == RT2880_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static const char __init *rt2880_get_soc_name(void)
+{
+ if (rt2880_soc_valid())
+ return "RT2880";
+ else
+ return "invalid";
+}
+
+static unsigned int __init rt2880_get_soc_id(void)
+{
+ return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt2880_get_soc_ver(void)
+{
+ return (rt2880_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt2880_get_soc_rev(void)
+{
+ return (rt2880_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static int __init rt2880_soc_dev_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Ralink";
+ soc_dev_attr->soc_id = rt2880_get_soc_name();
+
+ soc_dev_attr->data = soc_info_ptr;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
}
+ return 0;
+}
+device_initcall(rt2880_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ if (rt2880_soc_valid())
+ soc_info->compatible = "ralink,r2880-soc";
+ else
+ panic("rt288x: unknown SoC, n0:%08x n1:%08x",
+ rt2880_get_soc_name0(), rt2880_get_soc_name1());
+
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s id:%u rev:%u",
- name,
- (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
- (id & CHIP_ID_REV_MASK));
+ rt2880_get_soc_name(),
+ rt2880_get_soc_ver(),
+ rt2880_get_soc_rev());
soc_info->mem_base = RT2880_SDRAM_BASE;
soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
ralink_soc = RT2880_SOC;
+ soc_info_ptr = soc_info;
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include "common.h"
+static struct ralink_soc_info *soc_info_ptr;
+
static unsigned long rt5350_get_mem_size(void)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
unsigned long ret;
u32 t;
- t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+ t = __raw_readl(RT305X_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG);
t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
RT5350_SYSCFG0_DRAM_SIZE_MASK;
panic("Failed to remap core resources");
}
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt305x_get_soc_name0(void)
+{
+ return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init rt305x_get_soc_name1(void)
+{
+ return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init rt3052_soc_valid(void)
+{
+ if (rt305x_get_soc_name0() == RT3052_CHIP_NAME0 &&
+ rt305x_get_soc_name1() == RT3052_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static bool __init rt3350_soc_valid(void)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
- unsigned char *name;
- u32 n0;
- u32 n1;
- u32 id;
+ if (rt305x_get_soc_name0() == RT3350_CHIP_NAME0 &&
+ rt305x_get_soc_name1() == RT3350_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static bool __init rt3352_soc_valid(void)
+{
+ if (rt305x_get_soc_name0() == RT3352_CHIP_NAME0 &&
+ rt305x_get_soc_name1() == RT3352_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+static bool __init rt5350_soc_valid(void)
+{
+ if (rt305x_get_soc_name0() == RT5350_CHIP_NAME0 &&
+ rt305x_get_soc_name1() == RT5350_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
- if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+static const char __init *rt305x_get_soc_name(struct ralink_soc_info *soc_info)
+{
+ if (rt3052_soc_valid()) {
unsigned long icache_sets;
icache_sets = (read_c0_config1() >> 22) & 7;
if (icache_sets == 1) {
ralink_soc = RT305X_SOC_RT3050;
- name = "RT3050";
soc_info->compatible = "ralink,rt3050-soc";
+ return "RT3050";
} else {
ralink_soc = RT305X_SOC_RT3052;
- name = "RT3052";
soc_info->compatible = "ralink,rt3052-soc";
+ return "RT3052";
}
- } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+ } else if (rt3350_soc_valid()) {
ralink_soc = RT305X_SOC_RT3350;
- name = "RT3350";
soc_info->compatible = "ralink,rt3350-soc";
- } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+ return "RT3350";
+ } else if (rt3352_soc_valid()) {
ralink_soc = RT305X_SOC_RT3352;
- name = "RT3352";
soc_info->compatible = "ralink,rt3352-soc";
- } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+ return "RT3352";
+ } else if (rt5350_soc_valid()) {
ralink_soc = RT305X_SOC_RT5350;
- name = "RT5350";
soc_info->compatible = "ralink,rt5350-soc";
+ return "RT5350";
} else {
- panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ panic("rt305x: unknown SoC, n0:%08x n1:%08x",
+ rt305x_get_soc_name0(), rt305x_get_soc_name1());
}
+}
- id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt305x_get_soc_id(void)
+{
+ return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt305x_get_soc_ver(void)
+{
+ return (rt305x_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt305x_get_soc_rev(void)
+{
+ return (rt305x_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static const char __init *rt305x_get_soc_id_name(void)
+{
+ if (soc_is_rt3050())
+ return "rt3050";
+ else if (soc_is_rt3052())
+ return "rt3052";
+ else if (soc_is_rt3350())
+ return "rt3350";
+ else if (soc_is_rt3352())
+ return "rt3352";
+ else if (soc_is_rt5350())
+ return "rt5350";
+ else
+ return "invalid";
+}
+
+static int __init rt305x_soc_dev_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Ralink";
+ soc_dev_attr->soc_id = rt305x_get_soc_id_name();
+
+ soc_dev_attr->data = soc_info_ptr;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
+ }
+
+ return 0;
+}
+device_initcall(rt305x_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ const char *name = rt305x_get_soc_name(soc_info);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s id:%u rev:%u",
name,
- (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
- (id & CHIP_ID_REV_MASK));
+ rt305x_get_soc_ver(),
+ rt305x_get_soc_rev());
soc_info->mem_base = RT305X_SDRAM_BASE;
if (soc_is_rt5350()) {
soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
}
+
+ soc_info_ptr = soc_info;
}
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include "common.h"
+static struct ralink_soc_info *soc_info_ptr;
+
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
panic("Failed to remap core resources");
}
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt3883_get_soc_name0(void)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
- const char *name;
- u32 n0;
- u32 n1;
- u32 id;
+ return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID0_3);
+}
- n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
- n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
- id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+static unsigned int __init rt3883_get_soc_name1(void)
+{
+ return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID4_7);
+}
- if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
- soc_info->compatible = "ralink,rt3883-soc";
- name = "RT3883";
- } else {
- panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt3883_soc_valid(void)
+{
+ if (rt3883_get_soc_name0() == RT3883_CHIP_NAME0 &&
+ rt3883_get_soc_name1() == RT3883_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static const char __init *rt3883_get_soc_name(void)
+{
+ if (rt3883_soc_valid())
+ return "RT3883";
+ else
+ return "invalid";
+}
+
+static unsigned int __init rt3883_get_soc_id(void)
+{
+ return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_REVID);
+}
+
+static unsigned int __init rt3883_get_soc_ver(void)
+{
+ return (rt3883_get_soc_id() >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK;
+}
+
+static unsigned int __init rt3883_get_soc_rev(void)
+{
+ return (rt3883_get_soc_id() & RT3883_REVID_ECO_ID_MASK);
+}
+
+static int __init rt3883_soc_dev_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Ralink";
+ soc_dev_attr->soc_id = rt3883_get_soc_name();
+
+ soc_dev_attr->data = soc_info_ptr;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
}
+ return 0;
+}
+device_initcall(rt3883_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ if (rt3883_soc_valid())
+ soc_info->compatible = "ralink,rt3883-soc";
+ else
+ panic("rt3883: unknown SoC, n0:%08x n1:%08x",
+ rt3883_get_soc_name0(), rt3883_get_soc_name1());
+
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u",
- name,
- (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
- (id & RT3883_REVID_ECO_ID_MASK));
+ rt3883_get_soc_name(),
+ rt3883_get_soc_ver(),
+ rt3883_get_soc_rev());
soc_info->mem_base = RT3883_SDRAM_BASE;
soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
ralink_soc = RT3883_SOC;
+ soc_info_ptr = soc_info;
}
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
-config SIBYTE_BCM1120
- bool
- select CEVT_SB1250
- select CSRC_SB1250
- select IRQ_MIPS_CPU
- select SIBYTE_BCM112X
- select SIBYTE_HAS_ZBUS_PROFILING
- select SIBYTE_SB1xxx_SOC
-
config SIBYTE_BCM1125
bool
select CEVT_SB1250
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
-config SIBYTE_BCM1125H
- bool
- select CEVT_SB1250
- select CSRC_SB1250
- select HAVE_PCI
- select IRQ_MIPS_CPU
- select SIBYTE_BCM112X
- select SIBYTE_ENABLE_LDT_IF_PCI
- select SIBYTE_HAS_ZBUS_PROFILING
- select SIBYTE_SB1xxx_SOC
-
config SIBYTE_BCM112X
bool
select CEVT_SB1250
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
-config SIBYTE_BCM1x55
- bool
- select CEVT_BCM1480
- select CSRC_BCM1480
- select HAVE_PCI
- select IRQ_MIPS_CPU
- select SIBYTE_SB1xxx_SOC
- select SIBYTE_HAS_ZBUS_PROFILING
- select SYS_SUPPORTS_SMP
-
config SIBYTE_SB1xxx_SOC
bool
select IRQ_MIPS_CPU
config SIBYTE_BUS_WATCHER
bool "Support for Bus Watcher statistics"
depends on SIBYTE_SB1xxx_SOC && \
- (SIBYTE_BCM112X || SIBYTE_SB1250 || \
- SIBYTE_BCM1x55 || SIBYTE_BCM1x80)
+ (SIBYTE_BCM112X || SIBYTE_SB1250 || SIBYTE_BCM1x80)
help
Handle and keep statistics on the bus error interrupts (COR_ECC,
BAD_ECC, IO_BUS).
obj-$(CONFIG_SIBYTE_BCM112X) += common/
obj-$(CONFIG_SIBYTE_SB1250) += sb1250/
obj-$(CONFIG_SIBYTE_SB1250) += common/
-obj-$(CONFIG_SIBYTE_BCM1x55) += bcm1480/
-obj-$(CONFIG_SIBYTE_BCM1x55) += common/
obj-$(CONFIG_SIBYTE_BCM1x80) += bcm1480/
obj-$(CONFIG_SIBYTE_BCM1x80) += common/
#
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
-obj-$(CONFIG_SIBYTE_CARMEL) += swarm/
-obj-$(CONFIG_SIBYTE_CRHINE) += swarm/
obj-$(CONFIG_SIBYTE_CRHONE) += swarm/
obj-$(CONFIG_SIBYTE_RHONE) += swarm/
obj-$(CONFIG_SIBYTE_SENTOSA) += swarm/
-I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
-cflags-$(CONFIG_SIBYTE_BCM1x55) += \
- -I$(srctree)/arch/mips/include/asm/mach-sibyte \
- -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
-
cflags-$(CONFIG_SIBYTE_BCM1x80) += \
-I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte BCM91250A (SWARM) board
# Sibyte BCM91250C2 (LittleSur) board
# Sibyte BCM91x80 (BigSur) board
#
-load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
-load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
#include <asm/sibyte/bcm1480_regs.h>
#endif
#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
/* Use non-destructive register */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
-#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#elif defined(CONFIG_SIBYTE_BCM1x80)
/* Use non-destructive register */
/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG));
#endif
#endif
-#define SIBYTE_MAX_MEM_REGIONS 8
-phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
-phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
-unsigned int board_mem_region_count;
-
int cfe_cons_handle;
#ifdef CONFIG_BLK_DEV_INITRD
size -= 512;
memblock_add(addr, size);
}
- board_mem_region_addrs[board_mem_region_count] = addr;
- board_mem_region_sizes[board_mem_region_count] = size;
- board_mem_region_count++;
- if (board_mem_region_count ==
- SIBYTE_MAX_MEM_REGIONS) {
- /*
- * Too many regions. Need to configure more
- */
- while(1);
- }
}
}
#ifdef CONFIG_BLK_DEV_INITRD
#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
register_smp_ops(&sb_smp_ops);
#endif
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
register_smp_ops(&bcm1480_smp_ops);
#endif
}
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/bcm1480_int.h>
#error invalid SiByte UART configuration
#endif
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
#undef K_INT_TRACE_FREEZE
#define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
#undef K_INT_PERF_CNT
* a previous interrupt request. This means that bus profiling
* requires ALL of the SCD perf counters.
*/
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
/* keep counters 0,2,3,4,5,6,7 as is */
V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
* pass them through. I am exploiting my knowledge that
* cp0_status masks out IP[5]. krw
*/
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
__raw_writeq(K_BCM1480_INT_MAP_I3,
IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
__raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
#else
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/sibyte/sb1250.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
#include <asm/sibyte/bcm1480_regs.h>
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/board.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
extern void bcm1480_setup(void);
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
extern void sb1250_setup(void);
void __init plat_mem_setup(void)
{
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
bcm1480_setup();
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_setup();
#ifdef LEDS_PHYS
-#ifdef CONFIG_SIBYTE_CARMEL
-/* XXXKW need to detect Monterey/LittleSur/etc */
-#undef LEDS_PHYS
-#define LEDS_PHYS MLEDS_PHYS
-#endif
-
void setleds(char *str)
{
void *reg;
static struct irq_domain *gic_irq_domain;
static int gic_shared_intrs;
static unsigned int gic_cpu_pin;
-static unsigned int timer_cpu_pin;
static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
#ifdef CONFIG_GENERIC_IRQ_IPI
*/
switch (intr) {
case GIC_LOCAL_INT_TIMER:
- /* CONFIG_MIPS_CMP workaround (see __gic_init) */
- map = GIC_MAP_PIN_MAP_TO_PIN | timer_cpu_pin;
- fallthrough;
case GIC_LOCAL_INT_PERFCTR:
case GIC_LOCAL_INT_FDC:
/*
if (cpu_has_veic) {
/* Always use vector 1 in EIC mode */
gic_cpu_pin = 0;
- timer_cpu_pin = gic_cpu_pin;
set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET,
__gic_irq_dispatch);
} else {
gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET;
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec,
gic_irq_dispatch);
- /*
- * With the CMP implementation of SMP (deprecated), other CPUs
- * are started by the bootloader and put into a timer based
- * waiting poll loop. We must not re-route those CPU's local
- * timer interrupts as the wait instruction will never finish,
- * so just handle whatever CPU interrupt it is routed to by
- * default.
- *
- * This workaround should be removed when CMP support is
- * dropped.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMP) &&
- gic_local_irq_is_routable(GIC_LOCAL_INT_TIMER)) {
- timer_cpu_pin = read_gic_vl_timer_map() & GIC_MAP_PIN_MAP;
- irq_set_chained_handler(MIPS_CPU_IRQ_BASE +
- GIC_CPU_PIN_OFFSET +
- timer_cpu_pin,
- gic_irq_dispatch);
- } else {
- timer_cpu_pin = gic_cpu_pin;
- }
}
gic_irq_domain = irq_domain_add_simple(node, GIC_NUM_LOCAL_INTRS +
projects / linux-2.6-microblaze.git / commitdiff