ha->flags.ints_enabled = 0;
}
-In addition to write posting, on some large multiprocessing systems
-(e.g. SGI Challenge, Origin and Altix machines) posted writes won't be
-strongly ordered coming from different CPUs. Thus it's important to
-properly protect parts of your driver that do memory-mapped writes with
-locks and use the :c:func:`mmiowb()` to make sure they arrive in the
-order intended. Issuing a regular readX() will also ensure write ordering,
-but should only be used when the
-driver has to be sure that the write has actually arrived at the device
-(not that it's simply ordered with respect to other writes), since a
-full readX() is a relatively expensive operation.
-
-Generally, one should use :c:func:`mmiowb()` prior to releasing a spinlock
-that protects regions using :c:func:`writeb()` or similar functions that
-aren't surrounded by readb() calls, which will ensure ordering
-and flushing. The following pseudocode illustrates what might occur if
-write ordering isn't guaranteed via :c:func:`mmiowb()` or one of the
-readX() functions::
-
- CPU A: spin_lock_irqsave(&dev_lock, flags)
- CPU A: ...
- CPU A: writel(newval, ring_ptr);
- CPU A: spin_unlock_irqrestore(&dev_lock, flags)
- ...
- CPU B: spin_lock_irqsave(&dev_lock, flags)
- CPU B: writel(newval2, ring_ptr);
- CPU B: ...
- CPU B: spin_unlock_irqrestore(&dev_lock, flags)
-
-In the case above, newval2 could be written to ring_ptr before newval.
-Fixing it is easy though::
-
- CPU A: spin_lock_irqsave(&dev_lock, flags)
- CPU A: ...
- CPU A: writel(newval, ring_ptr);
- CPU A: mmiowb(); /* ensure no other writes beat us to the device */
- CPU A: spin_unlock_irqrestore(&dev_lock, flags)
- ...
- CPU B: spin_lock_irqsave(&dev_lock, flags)
- CPU B: writel(newval2, ring_ptr);
- CPU B: ...
- CPU B: mmiowb();
- CPU B: spin_unlock_irqrestore(&dev_lock, flags)
-
-See tg3.c for a real world example of how to use :c:func:`mmiowb()`
-
PCI ordering rules also guarantee that PIO read responses arrive after any
outstanding DMA writes from that bus, since for some devices the result of
a readb() call may signal to the driver that a DMA transaction is
information on consistent memory.
-MMIO WRITE BARRIER
-------------------
-
-The Linux kernel also has a special barrier for use with memory-mapped I/O
-writes:
-
- mmiowb();
-
-This is a variation on the mandatory write barrier that causes writes to weakly
-ordered I/O regions to be partially ordered. Its effects may go beyond the
-CPU->Hardware interface and actually affect the hardware at some level.
-
-See the subsection "Acquires vs I/O accesses" for more information.
-
-
===============================
IMPLICIT KERNEL MEMORY BARRIERS
===============================
*E, *F or *G following RELEASE Q
-
-ACQUIRES VS I/O ACCESSES
-------------------------
-
-Under certain circumstances (especially involving NUMA), I/O accesses within
-two spinlocked sections on two different CPUs may be seen as interleaved by the
-PCI bridge, because the PCI bridge does not necessarily participate in the
-cache-coherence protocol, and is therefore incapable of issuing the required
-read memory barriers.
-
-For example:
-
- CPU 1 CPU 2
- =============================== ===============================
- spin_lock(Q)
- writel(0, ADDR)
- writel(1, DATA);
- spin_unlock(Q);
- spin_lock(Q);
- writel(4, ADDR);
- writel(5, DATA);
- spin_unlock(Q);
-
-may be seen by the PCI bridge as follows:
-
- STORE *ADDR = 0, STORE *ADDR = 4, STORE *DATA = 1, STORE *DATA = 5
-
-which would probably cause the hardware to malfunction.
-
-
-What is necessary here is to intervene with an mmiowb() before dropping the
-spinlock, for example:
-
- CPU 1 CPU 2
- =============================== ===============================
- spin_lock(Q)
- writel(0, ADDR)
- writel(1, DATA);
- mmiowb();
- spin_unlock(Q);
- spin_lock(Q);
- writel(4, ADDR);
- writel(5, DATA);
- mmiowb();
- spin_unlock(Q);
-
-this will ensure that the two stores issued on CPU 1 appear at the PCI bridge
-before either of the stores issued on CPU 2.
-
-
-Furthermore, following a store by a load from the same device obviates the need
-for the mmiowb(), because the load forces the store to complete before the load
-is performed:
-
- CPU 1 CPU 2
- =============================== ===============================
- spin_lock(Q)
- writel(0, ADDR)
- a = readl(DATA);
- spin_unlock(Q);
- spin_lock(Q);
- writel(4, ADDR);
- b = readl(DATA);
- spin_unlock(Q);
-
-
-See Documentation/driver-api/device-io.rst for more information.
-
-
=================================
WHERE ARE MEMORY BARRIERS NEEDED?
=================================
Inside of the Linux kernel, I/O should be done through the appropriate accessor
routines - such as inb() or writel() - which know how to make such accesses
appropriately sequential. While this, for the most part, renders the explicit
-use of memory barriers unnecessary, there are a couple of situations where they
-might be needed:
-
- (1) On some systems, I/O stores are not strongly ordered across all CPUs, and
- so for _all_ general drivers locks should be used and mmiowb() must be
- issued prior to unlocking the critical section.
-
- (2) If the accessor functions are used to refer to an I/O memory window with
- relaxed memory access properties, then _mandatory_ memory barriers are
- required to enforce ordering.
+use of memory barriers unnecessary, if the accessor functions are used to refer
+to an I/O memory window with relaxed memory access properties, then _mandatory_
+memory barriers are required to enforce ordering.
See Documentation/driver-api/device-io.rst for more information.
Normally this won't be a problem because the I/O accesses done inside such
sections will include synchronous load operations on strictly ordered I/O
-registers that form implicit I/O barriers. If this isn't sufficient then an
-mmiowb() may need to be used explicitly.
+registers that form implicit I/O barriers.
A similar situation may occur between an interrupt routine and two routines
All of these accessors assume that the underlying peripheral is little-endian,
and will therefore perform byte-swapping operations on big-endian architectures.
-Composing I/O ordering barriers with SMP ordering barriers and LOCK/UNLOCK
-operations is a dangerous sport which may require the use of mmiowb(). See the
-subsection "Acquires vs I/O accesses" for more information.
========================================
ASSUMED MINIMUM EXECUTION ORDERING MODEL