clk: zynq: Move const initdata into correct code section

Use __initconst instead of __initdata for constant init data.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 6ab793a..9037beb 100644 (file)
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -85,24 +85,22 @@ static DEFINE_SPINLOCK(canmioclk_lock);
 static DEFINE_SPINLOCK(dbgclk_lock);
 static DEFINE_SPINLOCK(aperclk_lock);
 
-static const char dummy_nm[] __initconst = "dummy_name";
-
-static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"};
-static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"};
-static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"};
-static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm};
-static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm};
-static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate",
+static const char *armpll_parents[] __initconst = {"armpll_int", "ps_clk"};
+static const char *ddrpll_parents[] __initconst = {"ddrpll_int", "ps_clk"};
+static const char *iopll_parents[] __initconst = {"iopll_int", "ps_clk"};
+static const char *gem0_mux_parents[] __initconst = {"gem0_div1", "dummy_name"};
+static const char *gem1_mux_parents[] __initconst = {"gem1_div1", "dummy_name"};
+static const char *can0_mio_mux2_parents[] __initconst = {"can0_gate",
        "can0_mio_mux"};
-static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate",
+static const char *can1_mio_mux2_parents[] __initconst = {"can1_gate",
        "can1_mio_mux"};
-static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div",
-       dummy_nm};
+static const char *dbg_emio_mux_parents[] __initconst = {"dbg_div",
+       "dummy_name"};
 
-static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"};
-static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"};
-static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"};
-static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"};
+static const char *dbgtrc_emio_input_names[] __initconst = {"trace_emio_clk"};
+static const char *gem0_emio_input_names[] __initconst = {"gem0_emio_clk"};
+static const char *gem1_emio_input_names[] __initconst = {"gem1_emio_clk"};
+static const char *swdt_ext_clk_input_names[] __initconst = {"swdt_ext_clk"};
 
 static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
                const char *clk_name, void __iomem *fclk_ctrl_reg,
@@ -230,6 +228,7 @@ static void __init zynq_clk_setup(struct device_node *np)
        const char *periph_parents[4];
        const char *swdt_ext_clk_mux_parents[2];
        const char *can_mio_mux_parents[NUM_MIO_PINS];
+       const char *dummy_nm = "dummy_name";
 
        pr_info("Zynq clock init\n");