ARM: shmobile: henninger: add VIN0/ADV7180 DT support

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index 3a2ef0a..f1b56de 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
                renesas,groups = "usb1";
                renesas,function = "usb1";
        };
+
+       vin0_pins: vin0 {
+               renesas,groups = "vin0_data8", "vin0_clk";
+               renesas,function = "vin0";
+       };
 };
 
 &scif0 {
@@ -191,6 +196,19 @@
 
        status = "okay";
        clock-frequency = <400000>;
+
+       composite-in@20 {
+               compatible = "adi,adv7180";
+               reg = <0x20>;
+               remote = <&vin0>;
+
+               port {
+                       adv7180: endpoint {
+                               bus-width = <8>;
+                               remote-endpoint = <&vin0ep>;
+                       };
+               };
+       };
 };
 
 &qspi {
@@ -260,3 +278,20 @@
 &pciec {
        status = "okay";
 };
+
+/* composite video input */
+&vin0 {
+       status = "ok";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep: endpoint {
+                       remote-endpoint = <&adv7180>;
+                       bus-width = <8>;
+               };
+       };
+};