static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct meson_mx_sdhc_host *host = mmc_priv(mmc);
- u32 rx_clk_phase;
+ u32 val, rx_clk_phase;
int ret;
meson_mx_sdhc_disable_clks(mmc);
mmc->actual_clock = clk_get_rate(host->sd_clk);
/*
- * according to Amlogic the following latching points are
- * selected with empirical values, there is no (known) formula
- * to calculate these.
+ * Phase 90 should work in most cases. For data transmission,
+ * meson_mx_sdhc_execute_tuning() will find a accurate value
*/
- if (mmc->actual_clock > 100000000) {
- rx_clk_phase = 1;
- } else if (mmc->actual_clock > 45000000) {
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
- rx_clk_phase = 15;
- else
- rx_clk_phase = 11;
- } else if (mmc->actual_clock >= 25000000) {
- rx_clk_phase = 15;
- } else if (mmc->actual_clock > 5000000) {
- rx_clk_phase = 23;
- } else if (mmc->actual_clock > 1000000) {
- rx_clk_phase = 55;
- } else {
- rx_clk_phase = 1061;
- }
-
+ regmap_read(host->regmap, MESON_SDHC_CLKC, &val);
+ rx_clk_phase = FIELD_GET(MESON_SDHC_CLKC_CLK_DIV, val) / 4;
regmap_update_bits(host->regmap, MESON_SDHC_CLK2,
MESON_SDHC_CLK2_RX_CLK_PHASE,
FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,