ARM: Kirkwood: Add support for DLink DIR665

Add a device tree description of the DLINK DIR665 wireless access
point. The support for the 88E6171 switch will be added in a later
patch.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414793613-11798-2-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..31529cc 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
        kirkwood-d2net.dtb \
        kirkwood-db-88f6281.dtb \
        kirkwood-db-88f6282.dtb \
+       kirkwood-dir665.dtb \
        kirkwood-dns320.dtb \
        kirkwood-dns325.dtb \
        kirkwood-dockstar.dtb \

diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
new file mode 100644 (file)
index 0000000..d5ca928
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "D-Link DIR-665";
+       compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x8000000>; /* 128 MB */
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+       };
+
+       mbus {
+               pcie-controller {
+                       status = "okay";
+
+                       pcie@1,0 {
+                               status = "okay";
+                       };
+               };
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pinctrl-0 =< &pmx_led_usb
+                                    &pmx_led_internet_blue
+                                    &pmx_led_internet_amber
+                                    &pmx_led_5g &pmx_led_status_blue
+                                    &pmx_led_wps &pmx_led_status_amber
+                                    &pmx_led_24g
+                                    &pmx_btn_restart &pmx_btn_wps>;
+                       pinctrl-names = "default";
+
+                       pmx_led_usb: pmx-led-usb {
+                               marvell,pins = "mpp12";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_internet_blue: pmx-led-internet-blue {
+                               marvell,pins = "mpp42";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_internet_amber: pmx-led-internet-amber {
+                               marvell,pins = "mpp43";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_5g: pmx-led-5g {
+                               marvell,pins = "mpp44";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_status_blue: pmx-led-status-blue {
+                               marvell,pins = "mpp45";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_wps: pmx-led-wps {
+                               marvell,pins = "mpp47";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_status_amber: pmx-led-status-amber {
+                               marvell,pins = "mpp48";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_24g: pmx-led-24g {
+                               marvell,pins = "mpp49";
+                               marvell,function = "gpio";
+                       };
+                       pmx_btn_restart: pmx-btn-restart {
+                               marvell,pins = "mpp28";
+                               marvell,function = "gpio";
+                       };
+                       pmx_btn_wps: pmx-btn-wps {
+                               marvell,pins = "mpp46";
+                               marvell,function = "gpio";
+                       };
+               };
+
+               spi@10600 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mxicy,mx25l12805d";
+                               spi-max-frequency = <50000000>;
+                               reg = <0>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "nvram";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@40000 {
+                                       label = "kernel";
+                                       reg = <0x40000 0x180000>;
+                               };
+
+                               partition@1c0000 {
+                                       label = "rootfs";
+                                       reg = <0x1c0000 0xe00000>;
+                               };
+
+                               cal_data: partition@fc0000 {
+                                       label = "cal_data";
+                                       reg = <0xfc0000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@fd0000 {
+                                       label = "lang_pack";
+                                       reg = <0xfd0000 0x30000>;
+                                       read-only;
+                               };
+                       };
+               };
+
+               serial@12000 {
+                       status = "okay";
+               };
+
+               i2c@11000 {
+                       status = "okay";
+               };
+
+               ehci@50000 {
+                       status = "okay";
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               blue-usb {
+                       label = "dir665:blue:usb";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+               };
+               blue-internet {
+                       /* Can only be turned on if the Internet
+                        * Ethernet port has Link
+                        */
+                       label = "dir665:blue:internet";
+                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+               };
+               amber-internet {
+                       label = "dir665:amber:internet";
+                       gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+               };
+               blue-wifi5g {
+                       label = "dir665:blue:5g";
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+               };
+               blue-status {
+                       label = "dir665:blue:status";
+                       gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+               };
+               blue-wps {
+                       label = "dir665:blue:wps";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+               };
+               amber-status {
+                       label = "dir665:amber:status";
+                       gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+               };
+               blue-24g {
+                       label = "dir665:blue:24g";
+                       gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio {
+       status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+&eth0 {
+       status = "okay";
+
+       ethernet0-port@0 {
+               speed = <1000>;
+               duplex = <1>;
+       };
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+&eth1 {
+       status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+       status = "disabled";
+};