return ret;
}
-/**
- * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @sr: pointer to a DMA-able buffer where the value of the
- * Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, sr, 0));
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
- 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
- * the flash is ready for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 1 if ready, 0 if not ready, -errno on errors.
- */
-static int spi_nor_xsr_ready(struct spi_nor *nor)
-{
- int ret;
-
- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- return !!(nor->bouncebuf[0] & XSR_RDY);
-}
-
/**
* spi_nor_clear_sr() - Clear the Status Register.
* @nor: pointer to 'struct spi_nor'.
if (nor->params->ready)
return nor->params->ready(nor);
- if (nor->flags & SNOR_F_READY_XSR_RDY)
- sr = spi_nor_xsr_ready(nor);
- else
- sr = spi_nor_sr_ready(nor);
+ sr = spi_nor_sr_ready(nor);
if (sr < 0)
return sr;
fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
if (flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
-
- /*
- * Make sure the XSR_RDY flag is set before calling
- * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
- * with Atmel SPI NOR.
- */
- if (flags & SPI_NOR_XSR_RDY)
- nor->flags |= SNOR_F_READY_XSR_RDY;
}
/**
SNOR_F_USE_FSR = BIT(0),
SNOR_F_HAS_SR_TB = BIT(1),
SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
- SNOR_F_READY_XSR_RDY = BIT(3),
SNOR_F_USE_CLSR = BIT(4),
SNOR_F_BROKEN_RESET = BIT(5),
SNOR_F_4B_OPCODES = BIT(6),
* SPI_NOR_NO_FR: can't do fastread.
* USE_CLSR: use CLSR command.
* USE_FSR: use flag status register
- * SPI_NOR_XSR_RDY: S3AN flashes have specific opcode to read the
- * status register.
*
* @no_sfdp_flags: flags that indicate support that can be discovered via SFDP.
* Used when SFDP tables are not defined in the flash. These
#define SPI_NOR_NO_FR BIT(8)
#define USE_CLSR BIT(9)
#define USE_FSR BIT(10)
-#define SPI_NOR_XSR_RDY BIT(11)
u8 no_sfdp_flags;
#define SPI_NOR_SKIP_SFDP BIT(0)
.addr_width = (_addr_width), \
.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \
-#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
- .id = { \
- ((_jedec_id) >> 16) & 0xff, \
- ((_jedec_id) >> 8) & 0xff, \
- (_jedec_id) & 0xff \
- }, \
- .id_len = 3, \
- .sector_size = (8 * (_page_size)), \
- .n_sectors = (_n_sectors), \
- .page_size = (_page_size), \
- .addr_width = 3, \
- .flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
-
#define OTP_INFO(_len, _n_regions, _base, _offset) \
.otp_org = { \
.len = (_len), \
int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr);
-int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
u8 *buf);
ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
#include "core.h"
+#define SPINOR_OP_XSE 0x50 /* Sector erase */
+#define SPINOR_OP_XPP 0x82 /* Page program */
+#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
+
+#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
+#define XSR_RDY BIT(7) /* Ready */
+
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff \
+ }, \
+ .id_len = 3, \
+ .sector_size = (8 * (_page_size)), \
+ .n_sectors = (_n_sectors), \
+ .page_size = (_page_size), \
+ .addr_width = 3, \
+ .flags = SPI_NOR_NO_FR
+
+/* Xilinx S3AN share MFR with Atmel SPI NOR */
static const struct flash_info xilinx_nor_parts[] = {
/* Xilinx S3AN Internal Flash */
{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
return page | offset;
}
+/**
+ * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr: pointer to a DMA-able buffer where the value of the
+ * Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, sr, 0));
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
+ 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
+ * the flash is ready for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int spi_nor_xsr_ready(struct spi_nor *nor)
+{
+ int ret;
+
+ ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ return !!(nor->bouncebuf[0] & XSR_RDY);
+}
+
static int xilinx_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
static void xilinx_nor_late_init(struct spi_nor *nor)
{
nor->params->setup = xilinx_nor_setup;
+ nor->params->ready = spi_nor_xsr_ready;
}
static const struct spi_nor_fixups xilinx_nor_fixups = {
#define SPINOR_OP_BP 0x02 /* Byte program */
#define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
-/* Used for S3AN flashes only */
-#define SPINOR_OP_XSE 0x50 /* Sector erase */
-#define SPINOR_OP_XPP 0x82 /* Page program */
-#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
-
-#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
-#define XSR_RDY BIT(7) /* Ready */
-
-
/* Used for Macronix and Winbond flashes. */
#define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
#define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
projects / linux-2.6-microblaze.git / commitdiff