* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
+#define dprintk(fmt, arg...) do { \
+ if (debug) \
+ printk(KERN_DEBUG pr_fmt("%s: " fmt), \
+ __func__, ##arg); \
+} while (0)
struct i2c_device {
struct i2c_adapter *adap;
};
if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
+ dprintk("could not acquire lock\n");
return 0;
}
msg[1].buf = i2c->i2c_read_buffer;
if (i2c_transfer(i2c->adap, msg, 2) != 2)
- dprintk("i2c read error on %d", reg);
+ dprintk("i2c read error on %d\n", reg);
ret = (msg[1].buf[0] << 8) | msg[1].buf[1];
mutex_unlock(i2c->i2c_buffer_lock);
state->msg[1].len = 2;
if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2)
- dprintk("i2c read error on %d", reg);
+ dprintk("i2c read error on %d\n", reg);
ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
u16 ret;
if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
+ dprintk("could not acquire lock\n");
return 0;
}
u16 rw[2];
if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
+ dprintk("could not acquire lock\n");
return 0;
}
int ret = 0;
if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
+ dprintk("could not acquire lock\n");
return -EINVAL;
}
int ret;
if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
+ dprintk("could not acquire lock\n");
return -EINVAL;
}
{
u16 nud = dib8000_read_word(state, 298);
nud |= (1 << 3) | (1 << 0);
- dprintk("acquisition mode activated");
+ dprintk("acquisition mode activated\n");
dib8000_write_word(state, 298, nud);
}
static int dib8000_set_output_mode(struct dvb_frontend *fe, int mode)
fifo_threshold = 1792;
smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
- dprintk("-I- Setting output mode for demod %p to %d",
+ dprintk("-I- Setting output mode for demod %p to %d\n",
&state->fe[0], mode);
switch (mode) {
break;
default:
- dprintk("Unhandled output_mode passed to be set for demod %p",
+ dprintk("Unhandled output_mode passed to be set for demod %p\n",
&state->fe[0]);
return -EINVAL;
}
struct dib8000_state *state = fe->demodulator_priv;
u16 tmp, sync_wait = dib8000_read_word(state, 273) & 0xfff0;
- dprintk("set diversity input to %i", onoff);
+ dprintk("set diversity input to %i\n", onoff);
if (!state->differential_constellation) {
dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1
dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2
break;
}
- dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
+ dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x\n", reg_774, reg_775, reg_776, reg_900, reg_1280);
dib8000_write_word(state, 774, reg_774);
dib8000_write_word(state, 775, reg_775);
dib8000_write_word(state, 776, reg_776);
bw = 6000;
if (state->timf == 0) {
- dprintk("using default timf");
+ dprintk("using default timf\n");
timf = state->timf_default;
} else {
- dprintk("using updated timf");
+ dprintk("using updated timf\n");
timf = state->timf;
}
static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
{
- dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
+ dprintk("ifreq: %d %x, inversion: %d\n", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
if (state->revision != 0x8090) {
dib8000_write_word(state, 23,
(u16) (((bw->internal * 1000) >> 16) & 0xffff));
clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
dib8000_write_word(state, 902, clk_cfg1);
- dprintk("clk_cfg1: 0x%04x", clk_cfg1);
+ dprintk("clk_cfg1: 0x%04x\n", clk_cfg1);
/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
if (state->cfg.pll->ADClkSrc == 0)
pll->pll_ratio == loopdiv))
return -EINVAL;
- dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio);
+ dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)\n", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio);
if (state->revision == 0x8090) {
reg_1856 &= 0xf000;
reg_1857 = dib8000_read_word(state, 1857);
/* write new system clk into P_sec_len */
internal = dib8000_read32(state, 23) / 1000;
- dprintk("Old Internal = %d", internal);
+ dprintk("Old Internal = %d\n", internal);
xtal = 2 * (internal / loopdiv) * prediv;
internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio;
- dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000);
- dprintk("New Internal = %d", internal);
+ dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d\n", xtal, internal/1000, internal/2000, internal/8000);
+ dprintk("New Internal = %d\n", internal);
dib8000_write_word(state, 23,
(u16) (((internal / 2) >> 16) & 0xffff));
dib8000_write_word(state, 1857, reg_1857 | (1 << 15));
while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1)
- dprintk("Waiting for PLL to lock");
+ dprintk("Waiting for PLL to lock\n");
/* verify */
reg_1856 = dib8000_read_word(state, 1856);
- dprintk("PLL Updated with prediv = %d and loopdiv = %d",
+ dprintk("PLL Updated with prediv = %d and loopdiv = %d\n",
reg_1856&0x3f, (reg_1856>>6)&0x3f);
} else {
if (bw != state->current_demod_bw) {
/** Bandwidth change => force PLL update **/
- dprintk("PLL: Bandwidth Change %d MHz -> %d MHz (prediv: %d->%d)", state->current_demod_bw / 1000, bw / 1000, oldprediv, state->cfg.pll->pll_prediv);
+ dprintk("PLL: Bandwidth Change %d MHz -> %d MHz (prediv: %d->%d)\n", state->current_demod_bw / 1000, bw / 1000, oldprediv, state->cfg.pll->pll_prediv);
if (state->cfg.pll->pll_prediv != oldprediv) {
/** Full PLL change only if prediv is changed **/
/** full update => bypass and reconfigure **/
- dprintk("PLL: New Setting for %d MHz Bandwidth (prediv: %d, ratio: %d)", bw/1000, state->cfg.pll->pll_prediv, state->cfg.pll->pll_ratio);
+ dprintk("PLL: New Setting for %d MHz Bandwidth (prediv: %d, ratio: %d)\n", bw/1000, state->cfg.pll->pll_prediv, state->cfg.pll->pll_ratio);
dib8000_write_word(state, 902, dib8000_read_word(state, 902) | (1<<3)); /* bypass PLL */
dib8000_reset_pll(state);
dib8000_write_word(state, 898, 0x0004); /* sad */
if (ratio != 0) {
/** ratio update => only change ratio **/
- dprintk("PLL: Update ratio (prediv: %d, ratio: %d)", state->cfg.pll->pll_prediv, ratio);
+ dprintk("PLL: Update ratio (prediv: %d, ratio: %d)\n", state->cfg.pll->pll_prediv, ratio);
dib8000_write_word(state, 901, (state->cfg.pll->pll_prediv << 8) | (ratio << 0)); /* only the PLL ratio is updated. */
}
}
st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */
dib8000_write_word(st, 1030, st->cfg.gpio_val);
- dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
+ dprintk("gpio dir: %x: gpio val: %x\n", st->cfg.gpio_dir, st->cfg.gpio_val);
return 0;
}
value = dib8000_i2c_read16(client, 896);
if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
- dprintk("wrong Vendor ID (read=0x%x)", value);
+ dprintk("wrong Vendor ID (read=0x%x)\n", value);
return 0;
}
value = dib8000_i2c_read16(client, 897);
if (value != 0x8000 && value != 0x8001 &&
value != 0x8002 && value != 0x8090) {
- dprintk("wrong Device ID (%x)", value);
+ dprintk("wrong Device ID (%x)\n", value);
return 0;
}
switch (value) {
case 0x8000:
- dprintk("found DiB8000A");
+ dprintk("found DiB8000A\n");
break;
case 0x8001:
- dprintk("found DiB8000B");
+ dprintk("found DiB8000B\n");
break;
case 0x8002:
- dprintk("found DiB8000C");
+ dprintk("found DiB8000C\n");
break;
case 0x8090:
- dprintk("found DiB8096P");
+ dprintk("found DiB8096P\n");
break;
}
return value;
dib8000_write_word(state, 1287, 0x0003);
if (state->revision == 0x8000)
- dprintk("error : dib8000 MA not supported");
+ dprintk("error : dib8000 MA not supported\n");
dibx000_reset_i2c_master(&state->i2c_master);
if (state->cfg.drives)
dib8000_write_word(state, 906, state->cfg.drives);
else {
- dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
+ dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.\n");
/* min drive SDRAM - not optimal - adjust */
dib8000_write_word(state, 906, 0x2d98);
}
dib8000_write_word(state, 898, 0x0004);
if (dib8000_reset_gpio(state) != 0)
- dprintk("GPIO reset was not successful.");
+ dprintk("GPIO reset was not successful.\n");
if ((state->revision != 0x8090) &&
(dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0))
- dprintk("OUTPUT_MODE could not be resetted.");
+ dprintk("OUTPUT_MODE could not be resetted.\n");
state->current_agc = NULL;
}
if (agc == NULL) {
- dprintk("no valid AGC configuration found for band 0x%02x", band);
+ dprintk("no valid AGC configuration found for band 0x%02x\n", band);
return -EINVAL;
}
dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
- dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
+ dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
/* AGC continued */
(agc - state->current_agc->split.min_thres) /
(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
- dprintk("AGC split_offset: %d", split_offset);
+ dprintk("AGC split_offset: %d\n", split_offset);
// P_agc_force_split and P_agc_split_offset
dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
u32 P_Kout, u32 insertExtSynchro, u32 synchroMode,
u32 syncWord, u32 syncSize)
{
- dprintk("Configure DibStream Tx");
+ dprintk("Configure DibStream Tx\n");
dib8000_write_word(state, 1615, 1);
dib8000_write_word(state, 1603, P_Kin);
{
u32 syncFreq;
- dprintk("Configure DibStream Rx synchroMode = %d", synchroMode);
+ dprintk("Configure DibStream Rx synchroMode = %d\n", synchroMode);
if ((P_Kin != 0) && (P_Kout != 0)) {
syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout,
{
u16 reg_1287;
- dprintk("Enable Mpeg mux");
+ dprintk("Enable Mpeg mux\n");
dib8096p_enMpegMux(state, 0);
switch (mode) {
case MPEG_ON_DIBTX:
- dprintk("SET MPEG ON DIBSTREAM TX");
+ dprintk("SET MPEG ON DIBSTREAM TX\n");
dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0);
reg_1288 |= (1 << 9); break;
case DIV_ON_DIBTX:
- dprintk("SET DIV_OUT ON DIBSTREAM TX");
+ dprintk("SET DIV_OUT ON DIBSTREAM TX\n");
dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0);
reg_1288 |= (1 << 8); break;
case ADC_ON_DIBTX:
- dprintk("SET ADC_OUT ON DIBSTREAM TX");
+ dprintk("SET ADC_OUT ON DIBSTREAM TX\n");
dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0);
reg_1288 |= (1 << 7); break;
default:
switch (mode) {
case DEMOUT_ON_HOSTBUS:
- dprintk("SET DEM OUT OLD INTERF ON HOST BUS");
+ dprintk("SET DEM OUT OLD INTERF ON HOST BUS\n");
dib8096p_enMpegMux(state, 0);
reg_1288 |= (1 << 6);
break;
case DIBTX_ON_HOSTBUS:
- dprintk("SET DIBSTREAM TX ON HOST BUS");
+ dprintk("SET DIBSTREAM TX ON HOST BUS\n");
dib8096p_enMpegMux(state, 0);
reg_1288 |= (1 << 5);
break;
case MPEG_ON_HOSTBUS:
- dprintk("SET MPEG MUX ON HOST BUS");
+ dprintk("SET MPEG MUX ON HOST BUS\n");
reg_1288 |= (1 << 4);
break;
default:
switch (onoff) {
case 0: /* only use the internal way - not the diversity input */
- dprintk("%s mode OFF : by default Enable Mpeg INPUT",
+ dprintk("%s mode OFF : by default Enable Mpeg INPUT\n",
__func__);
/* outputRate = 8 */
dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0);
break;
case 1: /* both ways */
case 2: /* only the diversity input */
- dprintk("%s ON : Enable diversity INPUT", __func__);
+ dprintk("%s ON : Enable diversity INPUT\n", __func__);
dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0);
state->input_mode_mpeg = 0;
break;
case OUTMODE_MPEG2_SERIAL:
if (prefer_mpeg_mux_use) {
- dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux");
+ dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux\n");
dib8096p_configMpegMux(state, 3, 1, 1);
dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
} else {/* Use Smooth block */
- dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc");
+ dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc\n");
dib8096p_setHostBusMux(state,
DEMOUT_ON_HOSTBUS);
outreg |= (2 << 6) | (0 << 1);
case OUTMODE_MPEG2_PAR_GATED_CLK:
if (prefer_mpeg_mux_use) {
- dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux");
+ dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux\n");
dib8096p_configMpegMux(state, 2, 0, 0);
dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
} else { /* Use Smooth block */
- dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block");
+ dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block\n");
dib8096p_setHostBusMux(state,
DEMOUT_ON_HOSTBUS);
outreg |= (0 << 6);
break;
case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */
- dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block");
+ dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block\n");
dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
outreg |= (1 << 6);
break;
case OUTMODE_MPEG2_FIFO:
/* Using Smooth block because not supported
by new Mpeg Mux bloc */
- dprintk("dib8096P setting output mode TS_FIFO using Smooth block");
+ dprintk("dib8096P setting output mode TS_FIFO using Smooth block\n");
dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
outreg |= (5 << 6);
smo_mode |= (3 << 1);
break;
case OUTMODE_DIVERSITY:
- dprintk("dib8096P setting output mode MODE_DIVERSITY");
+ dprintk("dib8096P setting output mode MODE_DIVERSITY\n");
dib8096p_setDibTxMux(state, DIV_ON_DIBTX);
dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
break;
case OUTMODE_ANALOG_ADC:
- dprintk("dib8096P setting output mode MODE_ANALOG_ADC");
+ dprintk("dib8096P setting output mode MODE_ANALOG_ADC\n");
dib8096p_setDibTxMux(state, ADC_ON_DIBTX);
dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
break;
if (mode != OUTMODE_HIGH_Z)
outreg |= (1<<10);
- dprintk("output_mpeg2_in_188_bytes = %d",
+ dprintk("output_mpeg2_in_188_bytes = %d\n",
state->cfg.output_mpeg2_in_188_bytes);
if (state->cfg.output_mpeg2_in_188_bytes)
smo_mode |= (1 << 5);
n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
i--;
if (i == 0)
- dprintk("Tuner ITF: write busy (overflow)");
+ dprintk("Tuner ITF: write busy (overflow)\n");
}
dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f));
dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]);
n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
i--;
if (i == 0)
- dprintk("TunerITF: read busy (overflow)");
+ dprintk("TunerITF: read busy (overflow)\n");
}
dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f));
n_empty = dib8000_read_word(state, 1984)&0x1;
i--;
if (i == 0)
- dprintk("TunerITF: read busy (empty)");
+ dprintk("TunerITF: read busy (empty)\n");
}
read_word = dib8000_read_word(state, 1987);
struct dib8000_state *state = fe->demodulator_priv;
u16 en_cur_state;
- dprintk("sleep dib8096p: %d", onoff);
+ dprintk("sleep dib8096p: %d\n", onoff);
en_cur_state = dib8000_read_word(state, 1922);
dib8000_write_word(state, 29, (u16) (timf >> 16));
dib8000_write_word(state, 30, (u16) (timf & 0xffff));
- dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
+ dprintk("Updated timing frequency: %d (default: %d)\n", state->timf, state->timf_default);
}
static u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf)
int sub_channel_prbs_group = 0;
sub_channel_prbs_group = (subchannel / 3) + 1;
- dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]);
+ dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]);
switch (state->fe[0]->dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_2K:
slist = 0;
}
}
- dprintk("Using list for autosearch : %d", slist);
+ dprintk("Using list for autosearch : %d\n", slist);
dib8000_set_isdbt_common_channel(state, slist, 1);
if ((state->revision >= 0x8002) &&
(state->autosearch_state == AS_SEARCHING_FFT)) {
if (irq_pending & 0x1) {
- dprintk("dib8000_autosearch_irq: max correlation result available");
+ dprintk("dib8000_autosearch_irq: max correlation result available\n");
return 3;
}
} else {
if (irq_pending & 0x1) { /* failed */
- dprintk("dib8000_autosearch_irq failed");
+ dprintk("dib8000_autosearch_irq failed\n");
return 1;
}
if (irq_pending & 0x2) { /* succeeded */
- dprintk("dib8000_autosearch_irq succeeded");
+ dprintk("dib8000_autosearch_irq succeeded\n");
return 2;
}
}
dds += abs_offset_khz * unit_khz_dds_val;
}
- dprintk("setting a DDS frequency offset of %c%dkHz", invert ? '-' : ' ', dds / unit_khz_dds_val);
+ dprintk("setting a DDS frequency offset of %c%dkHz\n", invert ? '-' : ' ', dds / unit_khz_dds_val);
if (abs_offset_khz <= (state->cfg.pll->internal / ratio)) {
/* Max dds offset is the half of the demod freq */
}
}
- dprintk("%dkhz tuner offset (frequency = %dHz & current_rf = %dHz) total_dds_offset_hz = %d", c->frequency - current_rf, c->frequency, current_rf, total_dds_offset_khz);
+ dprintk("%dkhz tuner offset (frequency = %dHz & current_rf = %dHz) total_dds_offset_hz = %d\n", c->frequency - current_rf, c->frequency, current_rf, total_dds_offset_khz);
/* apply dds offset now */
dib8000_set_dds(state, total_dds_offset_khz);
static int dib8090p_init_sdram(struct dib8000_state *state)
{
u16 reg = 0;
- dprintk("init sdram");
+ dprintk("init sdram\n");
reg = dib8000_read_word(state, 274) & 0xfff0;
dib8000_write_word(state, 274, reg | 0x7); /* P_dintlv_delay_ram = 7 because of MobileSdram */
* Transmission mode is only detected on auto mode, currently
*/
if (c->transmission_mode == TRANSMISSION_MODE_AUTO) {
- dprintk("transmission mode auto");
+ dprintk("transmission mode auto\n");
return 0;
}
* Guard interval is only detected on auto mode, currently
*/
if (c->guard_interval == GUARD_INTERVAL_AUTO) {
- dprintk("guard interval auto");
+ dprintk("guard interval auto\n");
return 0;
}
* layer should be enabled
*/
if (!c->isdbt_layer_enabled) {
- dprintk("no layer modulation specified");
+ dprintk("no layer modulation specified\n");
return 0;
}
if ((c->layer[i].modulation == QAM_AUTO) ||
(c->layer[i].fec == FEC_AUTO)) {
- dprintk("layer %c has either modulation or FEC auto",
+ dprintk("layer %c has either modulation or FEC auto\n",
'A' + i);
return 0;
}
* fallback to auto mode.
*/
if (n_segs == 0 || n_segs > 13) {
- dprintk("number of segments is invalid");
+ dprintk("number of segments is invalid\n");
return 0;
}
#if 0
if (*tune_state < CT_DEMOD_STOP)
- dprintk("IN: context status = %d, TUNE_STATE %d autosearch step = %u jiffies = %lu",
+ dprintk("IN: context status = %d, TUNE_STATE %d autosearch step = %u jiffies = %lu\n",
state->channel_parameters_set, *tune_state, state->autosearch_state, now);
#endif
state->status = FE_STATUS_TUNE_PENDING;
state->channel_parameters_set = is_manual_mode(c);
- dprintk("Tuning channel on %s search mode",
+ dprintk("Tuning channel on %s search mode\n",
state->channel_parameters_set ? "manual" : "auto");
dib8000_viterbi_state(state, 0); /* force chan dec in restart */
corm[1] = (dib8000_read_word(state, 596) << 16) | (dib8000_read_word(state, 597));
corm[0] = (dib8000_read_word(state, 598) << 16) | (dib8000_read_word(state, 599));
}
- /* dprintk("corm fft: %u %u %u", corm[0], corm[1], corm[2]); */
+ /* dprintk("corm fft: %u %u %u\n", corm[0], corm[1], corm[2]); */
max_value = 0;
for (find_index = 1 ; find_index < 3 ; find_index++) {
state->found_nfft = TRANSMISSION_MODE_8K;
break;
}
- /* dprintk("Autosearch FFT has found Mode %d", max_value + 1); */
+ /* dprintk("Autosearch FFT has found Mode %d\n", max_value + 1); */
*tune_state = CT_DEMOD_SEARCH_NEXT;
state->autosearch_state = AS_SEARCHING_GUARD;
state->found_guard = dib8000_read_word(state, 572) & 0x3;
else
state->found_guard = dib8000_read_word(state, 570) & 0x3;
- /* dprintk("guard interval found=%i", state->found_guard); */
+ /* dprintk("guard interval found=%i\n", state->found_guard); */
*tune_state = CT_DEMOD_STEP_3;
break;
/* defines timeout for mpeg lock depending on interleaver length of longest layer */
for (i = 0; i < 3; i++) {
if (c->layer[i].interleaving >= deeper_interleaver) {
- dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving);
+ dprintk("layer%i: time interleaver = %d\n", i, c->layer[i].interleaving);
if (c->layer[i].segment_count > 0) { /* valid layer */
deeper_interleaver = c->layer[0].interleaving;
state->longest_intlv_layer = i;
locks *= 2;
*timeout = now + msecs_to_jiffies(200 * locks); /* give the mpeg lock 800ms if sram is present */
- dprintk("Deeper interleaver mode = %d on layer %d : timeout mult factor = %d => will use timeout = %ld",
+ dprintk("Deeper interleaver mode = %d on layer %d : timeout mult factor = %d => will use timeout = %ld\n",
deeper_interleaver, state->longest_intlv_layer, locks, *timeout);
*tune_state = CT_DEMOD_STEP_10;
case CT_DEMOD_STEP_10: /* 40 */
locks = dib8000_read_lock(fe);
if (locks&(1<<(7-state->longest_intlv_layer))) { /* mpeg lock : check the longest one */
- dprintk("ISDB-T layer locks: Layer A %s, Layer B %s, Layer C %s",
+ dprintk("ISDB-T layer locks: Layer A %s, Layer B %s, Layer C %s\n",
c->layer[0].segment_count ? (locks >> 7) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled",
c->layer[1].segment_count ? (locks >> 6) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled",
c->layer[2].segment_count ? (locks >> 5) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled");
*tune_state = CT_DEMOD_STEP_11;
} else { /* we are done mpeg of the longest interleaver xas not locking but let's try if an other layer has locked in the same time */
if (locks & (0x7 << 5)) {
- dprintk("Not all ISDB-T layers locked in %d ms: Layer A %s, Layer B %s, Layer C %s",
+ dprintk("Not all ISDB-T layers locked in %d ms: Layer A %s, Layer B %s, Layer C %s\n",
jiffies_to_msecs(now - *timeout),
c->layer[0].segment_count ? (locks >> 7) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled",
c->layer[1].segment_count ? (locks >> 6) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled",
dib8000_set_power_mode(state, DIB8000_POWER_ALL);
dib8000_set_adc_state(state, DIBX000_ADC_ON);
if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
- dprintk("could not start Slow ADC");
+ dprintk("could not start Slow ADC\n");
if (state->revision == 0x8090)
dib8000_sad_calib(state);
if (!(stat & FE_HAS_SYNC))
return 0;
- dprintk("dib8000_get_frontend: TMCC lock");
+ dprintk("dib8000_get_frontend: TMCC lock\n");
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat);
if (stat&FE_HAS_SYNC) {
- dprintk("TMCC lock on the slave%i", index_frontend);
+ dprintk("TMCC lock on the slave%i\n", index_frontend);
/* synchronize the cache with the other frontends */
state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend], c);
for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); sub_index_frontend++) {
switch ((val & 0x30) >> 4) {
case 1:
c->transmission_mode = TRANSMISSION_MODE_2K;
- dprintk("dib8000_get_frontend: transmission mode 2K");
+ dprintk("dib8000_get_frontend: transmission mode 2K\n");
break;
case 2:
c->transmission_mode = TRANSMISSION_MODE_4K;
- dprintk("dib8000_get_frontend: transmission mode 4K");
+ dprintk("dib8000_get_frontend: transmission mode 4K\n");
break;
case 3:
default:
c->transmission_mode = TRANSMISSION_MODE_8K;
- dprintk("dib8000_get_frontend: transmission mode 8K");
+ dprintk("dib8000_get_frontend: transmission mode 8K\n");
break;
}
switch (val & 0x3) {
case 0:
c->guard_interval = GUARD_INTERVAL_1_32;
- dprintk("dib8000_get_frontend: Guard Interval = 1/32 ");
+ dprintk("dib8000_get_frontend: Guard Interval = 1/32\n");
break;
case 1:
c->guard_interval = GUARD_INTERVAL_1_16;
- dprintk("dib8000_get_frontend: Guard Interval = 1/16 ");
+ dprintk("dib8000_get_frontend: Guard Interval = 1/16\n");
break;
case 2:
- dprintk("dib8000_get_frontend: Guard Interval = 1/8 ");
+ dprintk("dib8000_get_frontend: Guard Interval = 1/8\n");
c->guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
- dprintk("dib8000_get_frontend: Guard Interval = 1/4 ");
+ dprintk("dib8000_get_frontend: Guard Interval = 1/4\n");
c->guard_interval = GUARD_INTERVAL_1_4;
break;
}
val = dib8000_read_word(state, 505);
c->isdbt_partial_reception = val & 1;
- dprintk("dib8000_get_frontend: partial_reception = %d ", c->isdbt_partial_reception);
+ dprintk("dib8000_get_frontend: partial_reception = %d\n", c->isdbt_partial_reception);
for (i = 0; i < 3; i++) {
int show;
show = 1;
if (show)
- dprintk("dib8000_get_frontend: Layer %d segments = %d ",
+ dprintk("dib8000_get_frontend: Layer %d segments = %d\n",
i, c->layer[i].segment_count);
val = dib8000_read_word(state, 499 + i) & 0x3;
val = 4;
c->layer[i].interleaving = val;
if (show)
- dprintk("dib8000_get_frontend: Layer %d time_intlv = %d ",
+ dprintk("dib8000_get_frontend: Layer %d time_intlv = %d\n",
i, c->layer[i].interleaving);
val = dib8000_read_word(state, 481 + i);
case 1:
c->layer[i].fec = FEC_1_2;
if (show)
- dprintk("dib8000_get_frontend: Layer %d Code Rate = 1/2 ", i);
+ dprintk("dib8000_get_frontend: Layer %d Code Rate = 1/2\n", i);
break;
case 2:
c->layer[i].fec = FEC_2_3;
if (show)
- dprintk("dib8000_get_frontend: Layer %d Code Rate = 2/3 ", i);
+ dprintk("dib8000_get_frontend: Layer %d Code Rate = 2/3\n", i);
break;
case 3:
c->layer[i].fec = FEC_3_4;
if (show)
- dprintk("dib8000_get_frontend: Layer %d Code Rate = 3/4 ", i);
+ dprintk("dib8000_get_frontend: Layer %d Code Rate = 3/4\n", i);
break;
case 5:
c->layer[i].fec = FEC_5_6;
if (show)
- dprintk("dib8000_get_frontend: Layer %d Code Rate = 5/6 ", i);
+ dprintk("dib8000_get_frontend: Layer %d Code Rate = 5/6\n", i);
break;
default:
c->layer[i].fec = FEC_7_8;
if (show)
- dprintk("dib8000_get_frontend: Layer %d Code Rate = 7/8 ", i);
+ dprintk("dib8000_get_frontend: Layer %d Code Rate = 7/8\n", i);
break;
}
case 0:
c->layer[i].modulation = DQPSK;
if (show)
- dprintk("dib8000_get_frontend: Layer %d DQPSK ", i);
+ dprintk("dib8000_get_frontend: Layer %d DQPSK\n", i);
break;
case 1:
c->layer[i].modulation = QPSK;
if (show)
- dprintk("dib8000_get_frontend: Layer %d QPSK ", i);
+ dprintk("dib8000_get_frontend: Layer %d QPSK\n", i);
break;
case 2:
c->layer[i].modulation = QAM_16;
if (show)
- dprintk("dib8000_get_frontend: Layer %d QAM16 ", i);
+ dprintk("dib8000_get_frontend: Layer %d QAM16\n", i);
break;
case 3:
default:
c->layer[i].modulation = QAM_64;
if (show)
- dprintk("dib8000_get_frontend: Layer %d QAM64 ", i);
+ dprintk("dib8000_get_frontend: Layer %d QAM64\n", i);
break;
}
}
unsigned long delay, callback_time;
if (c->frequency == 0) {
- dprintk("dib8000: must at least specify frequency ");
+ dprintk("dib8000: must at least specify frequency\n");
return 0;
}
if (c->bandwidth_hz == 0) {
- dprintk("dib8000: no bandwidth specified, set to default ");
+ dprintk("dib8000: no bandwidth specified, set to default\n");
c->bandwidth_hz = 6000000;
}
/* we are in autosearch */
if (state->channel_parameters_set == 0) { /* searching */
if ((dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_DEMOD_SUCCESS) || (dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_FFT_SUCCESS)) {
- dprintk("autosearch succeeded on fe%i", index_frontend);
+ dprintk("autosearch succeeded on fe%i\n", index_frontend);
dib8000_get_frontend(state->fe[index_frontend], c); /* we read the channel parameters from the frontend which was successful */
state->channel_parameters_set = 1;
active = 1;
}
if (active == 0)
- dprintk("tuning done with status %d", dib8000_get_status(state->fe[0]));
+ dprintk("tuning done with status %d\n", dib8000_get_status(state->fe[0]));
}
if ((active == 1) && (callback_time == 0)) {
- dprintk("strange callback time something went wrong");
+ dprintk("strange callback time something went wrong\n");
active = 0;
}
time_us = dib8000_get_time_us(fe, -1);
state->ber_jiffies_stats = jiffies + msecs_to_jiffies((time_us + 500) / 1000);
- dprintk("Next all layers stats available in %u us.", time_us);
+ dprintk("Next all layers stats available in %u us.\n", time_us);
dib8000_read_ber(fe, &val);
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
index_frontend++;
if (index_frontend < MAX_NUMBER_OF_FRONTENDS) {
- dprintk("set slave fe %p to index %i", fe_slave, index_frontend);
+ dprintk("set slave fe %p to index %i\n", fe_slave, index_frontend);
state->fe[index_frontend] = fe_slave;
return 0;
}
- dprintk("too many slave frontend");
+ dprintk("too many slave frontend\n");
return -ENOMEM;
}
while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
index_frontend++;
if (index_frontend != 1) {
- dprintk("remove slave fe %p (index %i)", state->fe[index_frontend-1], index_frontend-1);
+ dprintk("remove slave fe %p (index %i)\n", state->fe[index_frontend-1], index_frontend-1);
state->fe[index_frontend] = NULL;
return 0;
}
- dprintk("no frontend to be removed");
+ dprintk("no frontend to be removed\n");
return -ENODEV;
}
client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
if (!client.i2c_write_buffer) {
- dprintk("%s: not enough memory", __func__);
+ dprintk("%s: not enough memory\n", __func__);
return -ENOMEM;
}
client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
if (!client.i2c_read_buffer) {
- dprintk("%s: not enough memory", __func__);
+ dprintk("%s: not enough memory\n", __func__);
ret = -ENOMEM;
goto error_memory_read;
}
client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL);
if (!client.i2c_buffer_lock) {
- dprintk("%s: not enough memory", __func__);
+ dprintk("%s: not enough memory\n", __func__);
ret = -ENOMEM;
goto error_memory_lock;
}
dib8000_i2c_write16(&client, 1287, 0x0003);
client.addr = default_addr;
if (dib8000_identify(&client) == 0) {
- dprintk("#%d: not identified", k);
+ dprintk("#%d: not identified\n", k);
ret = -EINVAL;
goto error;
}
client.addr = new_addr;
dib8000_identify(&client);
- dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
+ dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
}
for (k = 0; k < no_of_demods; k++) {
u16 val = dib8000_read_word(st, 299) & 0xffef;
val |= (onoff & 0x1) << 4;
- dprintk("pid filter enabled %d", onoff);
+ dprintk("pid filter enabled %d\n", onoff);
return dib8000_write_word(st, 299, val);
}
static int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
{
struct dib8000_state *st = fe->demodulator_priv;
- dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
+ dprintk("Index %x, PID %d, OnOff %d\n", id, pid, onoff);
return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0);
}
struct dvb_frontend *fe;
struct dib8000_state *state;
- dprintk("dib8000_init");
+ dprintk("dib8000_init\n");
state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
if (state == NULL)
projects / linux-2.6-microblaze.git / commitdiff