* Rename TPM_BUFSIZE defined in drivers/char/tpm/st33zp24/st33zp24.h to
ST33ZP24_BUFSIZE.
* Rename TPM_BUFSIZE defined in drivers/char/tpm/tpm_i2c_infineon.c to
TPM_I2C_INFINEON_BUFSIZE.
* Rename TPM_RETRY in tpm_i2c_nuvoton to TPM_I2C_RETRIES.
* Remove TPM_HEADER_SIZE from tpm_i2c_nuvoton.
Cc: stable@vger.kernel.org
Fixes:
bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Fixes:
aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Fixes:
32d33b29ba07 ("TPM: Retry SaveState command in suspend path")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
struct st33zp24_i2c_phy {
struct i2c_client *client;
- u8 buf[TPM_BUFSIZE + 1];
+ u8 buf[ST33ZP24_BUFSIZE + 1];
int io_lpcpd;
};
* some latency byte before the answer is available (max 15).
* We have 2048 + 1024 + 15.
*/
-#define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\
+#define ST33ZP24_SPI_BUFFER_SIZE (ST33ZP24_BUFSIZE + (ST33ZP24_BUFSIZE / 2) +\
MAX_SPI_LATENCY)
#ifndef __LOCAL_ST33ZP24_H__
#define __LOCAL_ST33ZP24_H__
-#define TPM_WRITE_DIRECTION 0x80
-#define TPM_BUFSIZE 2048
+#define TPM_WRITE_DIRECTION 0x80
+#define ST33ZP24_BUFSIZE 2048
struct st33zp24_dev {
struct tpm_chip *chip;
#include <linux/wait.h>
#include "tpm.h"
-/* max. buffer size supported by our TPM */
-#define TPM_BUFSIZE 1260
+#define TPM_I2C_INFINEON_BUFSIZE 1260
/* max. number of iterations after I2C NAK */
#define MAX_COUNT 3
UNKNOWN,
};
-/* Structure to store I2C TPM specific stuff */
struct tpm_inf_dev {
struct i2c_client *client;
int locality;
- u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
+ /* In addition to the data itself, the buffer must fit the 7-bit I2C
+ * address and the direction bit.
+ */
+ u8 buf[TPM_I2C_INFINEON_BUFSIZE + 1];
struct tpm_chip *chip;
enum i2c_chip_type chip_type;
unsigned int adapterlimit;
.buf = tpm_dev.buf
};
- if (len > TPM_BUFSIZE)
+ if (len > TPM_I2C_INFINEON_BUFSIZE)
return -EINVAL;
if (!tpm_dev.client->adapter->algo->master_xfer)
u8 retries = 0;
u8 sts = TPM_STS_GO;
- if (len > TPM_BUFSIZE)
- return -E2BIG; /* command is too long for our tpm, sorry */
+ if (len > TPM_I2C_INFINEON_BUFSIZE)
+ return -E2BIG;
if (request_locality(chip, 0) < 0)
return -EBUSY;
#include "tpm.h"
/* I2C interface offsets */
-#define TPM_STS 0x00
-#define TPM_BURST_COUNT 0x01
-#define TPM_DATA_FIFO_W 0x20
-#define TPM_DATA_FIFO_R 0x40
-#define TPM_VID_DID_RID 0x60
-/* TPM command header size */
-#define TPM_HEADER_SIZE 10
-#define TPM_RETRY 5
+#define TPM_STS 0x00
+#define TPM_BURST_COUNT 0x01
+#define TPM_DATA_FIFO_W 0x20
+#define TPM_DATA_FIFO_R 0x40
+#define TPM_VID_DID_RID 0x60
+#define TPM_I2C_RETRIES 5
/*
* I2C bus device maximum buffer size w/o counting I2C address or command
* i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
dev_err(dev, "%s() count < header size\n", __func__);
return -EIO;
}
- for (retries = 0; retries < TPM_RETRY; retries++) {
+ for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
if (retries > 0) {
/* if this is not the first trial, set responseRetry */
i2c_nuvoton_write_status(client,