docs: hwmon: pxe1610: convert to ReST format and add to the index

This document was recently introduced. Convert it to ReST
just like the other hwmon documents, adding it to the hwmon index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/657bf022625e0888d3becf10c78d162eeb864608.1563792334.git.mchehab+samsung@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 1d301d0..8147c3f 100644 (file)
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -129,6 +129,7 @@ Hardware Monitoring Kernel Drivers
    pcf8591
    pmbus
    powr1220
+   pxe1610
    pwm-fan
    raspberrypi-hwmon
    sch5627

diff --git a/Documentation/hwmon/pxe1610 b/Documentation/hwmon/pxe1610
deleted file mode 100644 (file)
index 211cede..0000000
--- a/Documentation/hwmon/pxe1610
+++ /dev/null
@@ -1,90 +0,0 @@
-Kernel driver pxe1610
-=====================
-
-Supported chips:
-  * Infineon PXE1610
-    Prefix: 'pxe1610'
-    Addresses scanned: -
-    Datasheet: Datasheet is not publicly available.
-
-  * Infineon PXE1110
-    Prefix: 'pxe1110'
-    Addresses scanned: -
-    Datasheet: Datasheet is not publicly available.
-
-  * Infineon PXM1310
-    Prefix: 'pxm1310'
-    Addresses scanned: -
-    Datasheet: Datasheet is not publicly available.
-
-Author: Vijay Khemka <vijaykhemka@fb.com>
-
-
-Description
------------
-
-PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
-and compliant to
-       -- Intel VR13 DC-DC converter specifications.
-       -- Intel SVID protocol.
-Used for Vcore power regulation for Intel VR13 based microprocessors
-       -- Servers, Workstations, and High-end desktops
-
-PXM1310 is a Multi-rail Controller and it is compliant to
-       -- Intel VR13 DC-DC converter specifications.
-       -- Intel SVID protocol.
-Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
-IMVP8 based systems
-
-
-Usage Notes
------------
-
-This driver does not probe for PMBus devices. You will have
-to instantiate devices explicitly.
-
-Example: the following commands will load the driver for an PXE1610
-at address 0x70 on I2C bus #4:
-
-# modprobe pxe1610
-# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
-
-It can also be instantiated by declaring in device tree
-
-
-Sysfs attributes
-----------------
-
-curr1_label            "iin"
-curr1_input            Measured input current
-curr1_alarm            Current high alarm
-
-curr[2-4]_label                "iout[1-3]"
-curr[2-4]_input                Measured output current
-curr[2-4]_crit         Critical maximum current
-curr[2-4]_crit_alarm   Current critical high alarm
-
-in1_label              "vin"
-in1_input              Measured input voltage
-in1_crit               Critical maximum input voltage
-in1_crit_alarm         Input voltage critical high alarm
-
-in[2-4]_label          "vout[1-3]"
-in[2-4]_input          Measured output voltage
-in[2-4]_lcrit          Critical minimum output voltage
-in[2-4]_lcrit_alarm    Output voltage critical low alarm
-in[2-4]_crit           Critical maximum output voltage
-in[2-4]_crit_alarm     Output voltage critical high alarm
-
-power1_label           "pin"
-power1_input           Measured input power
-power1_alarm           Input power high alarm
-
-power[2-4]_label       "pout[1-3]"
-power[2-4]_input       Measured output power
-
-temp[1-3]_input                Measured temperature
-temp[1-3]_crit         Critical high temperature
-temp[1-3]_crit_alarm   Chip temperature critical high alarm
-temp[1-3]_max          Maximum temperature
-temp[1-3]_max_alarm    Chip temperature high alarm

diff --git a/Documentation/hwmon/pxe1610.rst b/Documentation/hwmon/pxe1610.rst
new file mode 100644 (file)
index 0000000..4f23888
--- /dev/null
+++ b/Documentation/hwmon/pxe1610.rst
@@ -0,0 +1,107 @@
+Kernel driver pxe1610
+=====================
+
+Supported chips:
+
+  * Infineon PXE1610
+
+    Prefix: 'pxe1610'
+
+    Addresses scanned: -
+
+    Datasheet: Datasheet is not publicly available.
+
+  * Infineon PXE1110
+
+    Prefix: 'pxe1110'
+
+    Addresses scanned: -
+
+    Datasheet: Datasheet is not publicly available.
+
+  * Infineon PXM1310
+
+    Prefix: 'pxm1310'
+
+    Addresses scanned: -
+
+    Datasheet: Datasheet is not publicly available.
+
+Author: Vijay Khemka <vijaykhemka@fb.com>
+
+
+Description
+-----------
+
+PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
+and compliant to
+
+       - Intel VR13 DC-DC converter specifications.
+       - Intel SVID protocol.
+
+Used for Vcore power regulation for Intel VR13 based microprocessors
+
+       - Servers, Workstations, and High-end desktops
+
+PXM1310 is a Multi-rail Controller and it is compliant to
+
+       - Intel VR13 DC-DC converter specifications.
+       - Intel SVID protocol.
+
+Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
+IMVP8 based systems
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have
+to instantiate devices explicitly.
+
+Example: the following commands will load the driver for an PXE1610
+at address 0x70 on I2C bus #4::
+
+    # modprobe pxe1610
+    # echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring in device tree
+
+
+Sysfs attributes
+----------------
+
+======================  ====================================
+curr1_label            "iin"
+curr1_input            Measured input current
+curr1_alarm            Current high alarm
+
+curr[2-4]_label                "iout[1-3]"
+curr[2-4]_input                Measured output current
+curr[2-4]_crit         Critical maximum current
+curr[2-4]_crit_alarm   Current critical high alarm
+
+in1_label              "vin"
+in1_input              Measured input voltage
+in1_crit               Critical maximum input voltage
+in1_crit_alarm         Input voltage critical high alarm
+
+in[2-4]_label          "vout[1-3]"
+in[2-4]_input          Measured output voltage
+in[2-4]_lcrit          Critical minimum output voltage
+in[2-4]_lcrit_alarm    Output voltage critical low alarm
+in[2-4]_crit           Critical maximum output voltage
+in[2-4]_crit_alarm     Output voltage critical high alarm
+
+power1_label           "pin"
+power1_input           Measured input power
+power1_alarm           Input power high alarm
+
+power[2-4]_label       "pout[1-3]"
+power[2-4]_input       Measured output power
+
+temp[1-3]_input                Measured temperature
+temp[1-3]_crit         Critical high temperature
+temp[1-3]_crit_alarm   Chip temperature critical high alarm
+temp[1-3]_max          Maximum temperature
+temp[1-3]_max_alarm    Chip temperature high alarm
+======================  ====================================