--- /dev/null
+/*
+ * Driver for the Texas Instruments DP83822 PHY
+ *
+ * Copyright (C) 2017 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83822_PHY_ID 0x2000a240
+#define DP83822_DEVADDR 0x1f
+
+#define MII_DP83822_PHYSCR 0x11
+#define MII_DP83822_MISR1 0x12
+#define MII_DP83822_MISR2 0x13
+#define MII_DP83822_RESET_CTRL 0x1f
+
+#define DP83822_HW_RESET BIT(15)
+#define DP83822_SW_RESET BIT(14)
+
+/* PHYSCR Register Fields */
+#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */
+#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */
+
+/* MISR1 bits */
+#define DP83822_RX_ERR_HF_INT_EN BIT(0)
+#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
+#define DP83822_ANEG_COMPLETE_INT_EN BIT(2)
+#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3)
+#define DP83822_SPEED_CHANGED_INT_EN BIT(4)
+#define DP83822_LINK_STAT_INT_EN BIT(5)
+#define DP83822_ENERGY_DET_INT_EN BIT(6)
+#define DP83822_LINK_QUAL_INT_EN BIT(7)
+
+/* MISR2 bits */
+#define DP83822_JABBER_DET_INT_EN BIT(0)
+#define DP83822_WOL_PKT_INT_EN BIT(1)
+#define DP83822_SLEEP_MODE_INT_EN BIT(2)
+#define DP83822_MDI_XOVER_INT_EN BIT(3)
+#define DP83822_LB_FIFO_INT_EN BIT(4)
+#define DP83822_PAGE_RX_INT_EN BIT(5)
+#define DP83822_ANEG_ERR_INT_EN BIT(6)
+#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)
+
+/* INT_STAT1 bits */
+#define DP83822_WOL_INT_EN BIT(4)
+#define DP83822_WOL_INT_STAT BIT(12)
+
+#define MII_DP83822_RXSOP1 0x04a5
+#define MII_DP83822_RXSOP2 0x04a6
+#define MII_DP83822_RXSOP3 0x04a7
+
+/* WoL Registers */
+#define MII_DP83822_WOL_CFG 0x04a0
+#define MII_DP83822_WOL_STAT 0x04a1
+#define MII_DP83822_WOL_DA1 0x04a2
+#define MII_DP83822_WOL_DA2 0x04a3
+#define MII_DP83822_WOL_DA3 0x04a4
+
+/* WoL bits */
+#define DP83822_WOL_MAGIC_EN BIT(0)
+#define DP83822_WOL_SECURE_ON BIT(5)
+#define DP83822_WOL_EN BIT(7)
+#define DP83822_WOL_INDICATION_SEL BIT(8)
+#define DP83822_WOL_CLR_INDICATION BIT(11)
+
+static int dp83822_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_DP83822_MISR1);
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_DP83822_MISR2);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83822_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ u16 value;
+ const u8 *mac;
+
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+ mac = (const u8 *)ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EINVAL;
+
+ /* MAC addresses start with byte 5, but stored in mac[0].
+ * 822 PHYs store bytes 4|5, 2|3, 0|1
+ */
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
+ (mac[1] << 8) | mac[0]);
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
+ (mac[3] << 8) | mac[2]);
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
+ (mac[5] << 8) | mac[4]);
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_CFG);
+ if (wol->wolopts & WAKE_MAGIC)
+ value |= DP83822_WOL_MAGIC_EN;
+ else
+ value &= ~DP83822_WOL_MAGIC_EN;
+
+ if (wol->wolopts & WAKE_MAGICSECURE) {
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP1,
+ (wol->sopass[1] << 8) | wol->sopass[0]);
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP2,
+ (wol->sopass[3] << 8) | wol->sopass[2]);
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP3,
+ (wol->sopass[5] << 8) | wol->sopass[4]);
+ value |= DP83822_WOL_SECURE_ON;
+ } else {
+ value &= ~DP83822_WOL_SECURE_ON;
+ }
+
+ value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
+ DP83822_WOL_CLR_INDICATION);
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+ value);
+ } else {
+ value = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_CFG);
+ value &= ~DP83822_WOL_EN;
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+ value);
+ }
+
+ return 0;
+}
+
+static void dp83822_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ int value;
+ u16 sopass_val;
+
+ wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+ wol->wolopts = 0;
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+ if (value & DP83822_WOL_MAGIC_EN)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (value & DP83822_WOL_SECURE_ON) {
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP1);
+ wol->sopass[0] = (sopass_val & 0xff);
+ wol->sopass[1] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP2);
+ wol->sopass[2] = (sopass_val & 0xff);
+ wol->sopass[3] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP3);
+ wol->sopass[4] = (sopass_val & 0xff);
+ wol->sopass[5] = (sopass_val >> 8);
+
+ wol->wolopts |= WAKE_MAGICSECURE;
+ }
+
+ /* WoL is not enabled so set wolopts to 0 */
+ if (!(value & DP83822_WOL_EN))
+ wol->wolopts = 0;
+}
+
+static int dp83822_config_intr(struct phy_device *phydev)
+{
+ int misr_status;
+ int physcr_status;
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ misr_status = phy_read(phydev, MII_DP83822_MISR1);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83822_RX_ERR_HF_INT_EN |
+ DP83822_FALSE_CARRIER_HF_INT_EN |
+ DP83822_ANEG_COMPLETE_INT_EN |
+ DP83822_DUP_MODE_CHANGE_INT_EN |
+ DP83822_SPEED_CHANGED_INT_EN |
+ DP83822_LINK_STAT_INT_EN |
+ DP83822_ENERGY_DET_INT_EN |
+ DP83822_LINK_QUAL_INT_EN);
+
+ err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
+ if (err < 0)
+ return err;
+
+ misr_status = phy_read(phydev, MII_DP83822_MISR2);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83822_JABBER_DET_INT_EN |
+ DP83822_WOL_PKT_INT_EN |
+ DP83822_SLEEP_MODE_INT_EN |
+ DP83822_MDI_XOVER_INT_EN |
+ DP83822_LB_FIFO_INT_EN |
+ DP83822_PAGE_RX_INT_EN |
+ DP83822_ANEG_ERR_INT_EN |
+ DP83822_EEE_ERROR_CHANGE_INT_EN);
+
+ err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
+ if (err < 0)
+ return err;
+
+ physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
+ if (physcr_status < 0)
+ return physcr_status;
+
+ physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;
+
+ } else {
+ err = phy_write(phydev, MII_DP83822_MISR1, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_DP83822_MISR1, 0);
+ if (err < 0)
+ return err;
+
+ physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
+ if (physcr_status < 0)
+ return physcr_status;
+
+ physcr_status &= ~DP83822_PHYSCR_INTEN;
+ }
+
+ return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
+}
+
+static int dp83822_config_init(struct phy_device *phydev)
+{
+ int err;
+ int value;
+
+ err = genphy_config_init(phydev);
+ if (err < 0)
+ return err;
+
+ value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN;
+
+ return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+ value);
+}
+
+static int dp83822_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
+ if (err < 0)
+ return err;
+
+ dp83822_config_init(phydev);
+
+ return 0;
+}
+
+static int dp83822_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+ if (!(value & DP83822_WOL_EN))
+ genphy_suspend(phydev);
+
+ return 0;
+}
+
+static int dp83822_resume(struct phy_device *phydev)
+{
+ int value;
+
+ genphy_resume(phydev);
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
+ DP83822_WOL_CLR_INDICATION);
+
+ return 0;
+}
+
+static struct phy_driver dp83822_driver[] = {
+ {
+ .phy_id = DP83822_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83822",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = dp83822_config_init,
+ .soft_reset = dp83822_phy_reset,
+ .get_wol = dp83822_get_wol,
+ .set_wol = dp83822_set_wol,
+ .ack_interrupt = dp83822_ack_interrupt,
+ .config_intr = dp83822_config_intr,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = dp83822_suspend,
+ .resume = dp83822_resume,
+ },
+};
+module_phy_driver(dp83822_driver);
+
+static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
+ { DP83822_PHY_ID, 0xfffffff0 },
+ { },
+};
+MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");
projects / linux-2.6-microblaze.git / commitdiff