Merge tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git...

STM32 DT updates for v5.10, round 1

Highlights:
----------

MCU part:
 -Some changes on stm32h743: enable display controler, add SPI resets,
  use "st,stm32h7-uart" compatible.

MPU part:
 -Add new Odyssey SOM board based on STM32MP157CAC. It embeds 4GB eMMC, 512
  MB DDR3 RAM, USB and ETH connectors and a combo wifi/BT (AP6236 chip).
 -Add FMC2 EBI support on EV1 board.
 -Add arm-pmu node.
 -LXA:
  -Change ethernet phy delays to avoid kernel warnings.
  -Enable DDR50 eMMC mode.
 -DH:
  -Add new DH DRC02 unit board.
  -Add USB OTG support on PDK2 board.
  -Use uart8 RTS/CTS on PDK2 board.
  -Fix display PWM channel on PDK2 board.
  -Swap phy reset line and touchscreen irq on DHCOM SOM.
  -Drop QSPI CS2 on DHCOM SOM.
  -Update SDMMC pin config on AV96.
  -Enable uart7 RTS/CTS on AV96.

* tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: add arm-pmu node on stm32mp15
  ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
  ARM: dts: stm32: lxa-mc1: enable DDR50 mode on eMMC
  ARM: dts: stm32: Fix DH PDK2 display PWM channel
  ARM: dts: stm32: Enable RTS/CTS for DH AV96 UART7
  ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
  ARM: dts: stm32: use stm32h7 usart compatible string for stm32h743
  ARM: dts: stm32: add resets property to spi device nodes on stm32h743
  ARM: dts: stm32: add display controller node to stm32h743
  ARM: dts: stm32: Enable RTS/CTS for DH PDK2 UART8
  ARM: dts: stm32: Drop QSPI CS2 pinmux on DHCOM
  ARM: dts: stm32: Add STM32MP1 UART8 RTS/CTS pinmux
  ARM: dts: stm32: add initial support for stm32mp157-odyssey board
  dt-bindings: arm: stm32: document Odyssey compatible
  dt-bindings: vendor-prefixes: add Seeed Studio
  ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
  ARM: dts: stm32: Add USB OTG support to DH PDK2
  ARM: dts: stm32: Fix sdmmc2 pins on AV96
  ARM: dts: stm32: Add DHSOM based DRC02 board
  ARM: dts: stm32: Move ethernet PHY into DH SoM DT

Link: https://lore.kernel.org/r/7e2a93c9-cf37-bc93-ed6e-d9cb1808b7a3@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>

diff --cc Documentation/devicetree/bindings/vendor-prefixes.yaml
Simple merge

diff --cc arch/arm/boot/dts/Makefile
Simple merge