arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported...
authorRyan Walklin <ryan@testtoast.com>
Wed, 23 Oct 2024 07:57:03 +0000 (20:57 +1300)
committerChen-Yu Tsai <wens@csie.org>
Fri, 25 Oct 2024 15:21:51 +0000 (23:21 +0800)
Now that the H616 (and variants) audio codec is supported, enable it for
boards with a mainline DTS. The Tanix TX1, Transpeed 8K618-T and X-96
Mate have all been tested with the onboard 3.5mm audio jack and the
Orange Pi Zero 3 with a 3.5mm jack connected to the audio header.

The RG35XX (2024, -H, -Plus and -SP variants) are also tested working
but have a separate mux and GPIO-controlled (PI5) power amplifier to
support both a headphone jack and onboard speakers.

The headphone jack has a GPIO for jack detection, but this is not
currently supported by the driver, so audio is heard both via the
headphone jack and speakers when the speaker amp is powered (by the
CLDO1 regulator, defined as always-on until proper jack detection is
implemented).

Define the audio codec and routing for all supported H616 and variant
boards, and power and speaker amp enablement where present on boards and
known.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-8-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts

index bb2cde5..bafd3e8 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
index fc7315b..19c5cf7 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
 &ehci1 {
        status = "okay";
 };
index 26d25b5..6dfe4ea 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdca>;
 };
index 6a4f0da..a0fe7a9 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
index d6631bf..59ee2b2 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
index 80ccab7..a231abf 100644 (file)
        };
 };
 
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc1>;
 };
                        reg_aldo4: aldo4 {
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
-                               regulator-name = "vcc-pg";
+                               regulator-name = "avcc";
                        };
 
                        reg_bldo1: bldo1 {
                        };
 
                        reg_cldo1: cldo1 {
-                               /* 3.3v - audio codec - not yet implemented */
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc-spkr-amp";
                        };
 
                        reg_cldo2: cldo2 {